From c906108c21474dfb4ed285bcc0ac6fe02cd400cc Mon Sep 17 00:00:00 2001 From: Stan Shebs Date: Fri, 16 Apr 1999 01:35:26 +0000 Subject: Initial creation of sourceware repository --- gdb/remote-st.c | 879 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 879 insertions(+) create mode 100644 gdb/remote-st.c (limited to 'gdb/remote-st.c') diff --git a/gdb/remote-st.c b/gdb/remote-st.c new file mode 100644 index 0000000..1efdbfa --- /dev/null +++ b/gdb/remote-st.c @@ -0,0 +1,879 @@ +/* Remote debugging interface for Tandem ST2000 phone switch, for GDB. + Copyright 1990, 1991, 1992 Free Software Foundation, Inc. + Contributed by Cygnus Support. Written by Jim Kingdon for Cygnus. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* This file was derived from remote-eb.c, which did a similar job, but for + an AMD-29K running EBMON. That file was in turn derived from remote.c + as mentioned in the following comment (left in for comic relief): + + "This is like remote.c but is for an esoteric situation-- + having an a29k board in a PC hooked up to a unix machine with + a serial line, and running ctty com1 on the PC, through which + the unix machine can run ebmon. Not to mention that the PC + has PC/NFS, so it can access the same executables that gdb can, + over the net in real time." + + In reality, this module talks to a debug monitor called 'STDEBUG', which + runs in a phone switch. We communicate with STDEBUG via either a direct + serial line, or a TCP (or possibly TELNET) stream to a terminal multiplexor, + which in turn talks to the phone switch. */ + +#include "defs.h" +#include "gdbcore.h" +#include "target.h" +#include "wait.h" +#ifdef ANSI_PROTOTYPES +#include +#else +#include +#endif +#include +#include "gdb_string.h" +#include +#include "serial.h" + +extern struct target_ops st2000_ops; /* Forward declaration */ + +static void st2000_close(); +static void st2000_fetch_register(); +static void st2000_store_register(); + +#define LOG_FILE "st2000.log" +#if defined (LOG_FILE) +FILE *log_file; +#endif + +static int timeout = 24; + +/* Descriptor for I/O to remote machine. Initialize it to -1 so that + st2000_open knows that we don't have a file open when the program + starts. */ + +static serial_t st2000_desc; + +/* Send data to stdebug. Works just like printf. */ + +static void +#ifdef ANSI_PROTOTYPES +printf_stdebug(char *pattern, ...) +#else +printf_stdebug(va_alist) + va_dcl +#endif +{ + va_list args; + char buf[200]; + +#ifdef ANSI_PROTOTYPES + va_start(args, pattern); +#else + char *pattern; + va_start(args); + pattern = va_arg(args, char *); +#endif + + vsprintf(buf, pattern, args); + va_end(args); + + if (SERIAL_WRITE(st2000_desc, buf, strlen(buf))) + fprintf(stderr, "SERIAL_WRITE failed: %s\n", safe_strerror(errno)); +} + +/* Read a character from the remote system, doing all the fancy timeout + stuff. */ + +static int +readchar(timeout) + int timeout; +{ + int c; + + c = SERIAL_READCHAR(st2000_desc, timeout); + +#ifdef LOG_FILE + putc(c & 0x7f, log_file); +#endif + + if (c >= 0) + return c & 0x7f; + + if (c == SERIAL_TIMEOUT) + { + if (timeout == 0) + return c; /* Polls shouldn't generate timeout errors */ + + error("Timeout reading from remote system."); + } + + perror_with_name("remote-st2000"); +} + +/* Scan input from the remote system, until STRING is found. If DISCARD is + non-zero, then discard non-matching input, else print it out. + Let the user break out immediately. */ +static void +expect(string, discard) + char *string; + int discard; +{ + char *p = string; + int c; + + immediate_quit = 1; + while (1) + { + c = readchar(timeout); + if (c == *p++) + { + if (*p == '\0') + { + immediate_quit = 0; + return; + } + } + else + { + if (!discard) + { + fwrite(string, 1, (p - 1) - string, stdout); + putchar((char)c); + fflush(stdout); + } + p = string; + } + } +} + +/* Keep discarding input until we see the STDEBUG prompt. + + The convention for dealing with the prompt is that you + o give your command + o *then* wait for the prompt. + + Thus the last thing that a procedure does with the serial line + will be an expect_prompt(). Exception: st2000_resume does not + wait for the prompt, because the terminal is being handed over + to the inferior. However, the next thing which happens after that + is a st2000_wait which does wait for the prompt. + Note that this includes abnormal exit, e.g. error(). This is + necessary to prevent getting into states from which we can't + recover. */ +static void +expect_prompt(discard) + int discard; +{ +#if defined (LOG_FILE) + /* This is a convenient place to do this. The idea is to do it often + enough that we never lose much data if we terminate abnormally. */ + fflush(log_file); +#endif + expect ("dbug> ", discard); +} + +/* Get a hex digit from the remote system & return its value. + If ignore_space is nonzero, ignore spaces (not newline, tab, etc). */ +static int +get_hex_digit(ignore_space) + int ignore_space; +{ + int ch; + while (1) + { + ch = readchar(timeout); + if (ch >= '0' && ch <= '9') + return ch - '0'; + else if (ch >= 'A' && ch <= 'F') + return ch - 'A' + 10; + else if (ch >= 'a' && ch <= 'f') + return ch - 'a' + 10; + else if (ch == ' ' && ignore_space) + ; + else + { + expect_prompt(1); + error("Invalid hex digit from remote system."); + } + } +} + +/* Get a byte from stdebug and put it in *BYT. Accept any number + leading spaces. */ +static void +get_hex_byte (byt) + char *byt; +{ + int val; + + val = get_hex_digit (1) << 4; + val |= get_hex_digit (0); + *byt = val; +} + +/* Get N 32-bit words from remote, each preceded by a space, + and put them in registers starting at REGNO. */ +static void +get_hex_regs (n, regno) + int n; + int regno; +{ + long val; + int i; + + for (i = 0; i < n; i++) + { + int j; + + val = 0; + for (j = 0; j < 8; j++) + val = (val << 4) + get_hex_digit (j == 0); + supply_register (regno++, (char *) &val); + } +} + +/* This is called not only when we first attach, but also when the + user types "run" after having attached. */ +static void +st2000_create_inferior (execfile, args, env) + char *execfile; + char *args; + char **env; +{ + int entry_pt; + + if (args && *args) + error("Can't pass arguments to remote STDEBUG process"); + + if (execfile == 0 || exec_bfd == 0) + error("No executable file specified"); + + entry_pt = (int) bfd_get_start_address (exec_bfd); + +/* The "process" (board) is already stopped awaiting our commands, and + the program is already downloaded. We just set its PC and go. */ + + clear_proceed_status (); + + /* Tell wait_for_inferior that we've started a new process. */ + init_wait_for_inferior (); + + /* Set up the "saved terminal modes" of the inferior + based on what modes we are starting it with. */ + target_terminal_init (); + + /* Install inferior's terminal modes. */ + target_terminal_inferior (); + + /* insert_step_breakpoint (); FIXME, do we need this? */ + /* Let 'er rip... */ + proceed ((CORE_ADDR)entry_pt, TARGET_SIGNAL_DEFAULT, 0); +} + +/* Open a connection to a remote debugger. + NAME is the filename used for communication. */ + +static int baudrate = 9600; +static char dev_name[100]; + +static void +st2000_open(args, from_tty) + char *args; + int from_tty; +{ + int n; + char junk[100]; + + target_preopen(from_tty); + + n = sscanf(args, " %s %d %s", dev_name, &baudrate, junk); + + if (n != 2) + error("Bad arguments. Usage: target st2000 \n\ +or target st2000 \n"); + + st2000_close(0); + + st2000_desc = SERIAL_OPEN(dev_name); + + if (!st2000_desc) + perror_with_name(dev_name); + + SERIAL_SETBAUDRATE(st2000_desc, baudrate); + + SERIAL_RAW(st2000_desc); + + push_target(&st2000_ops); + +#if defined (LOG_FILE) + log_file = fopen (LOG_FILE, "w"); + if (log_file == NULL) + perror_with_name (LOG_FILE); +#endif + + /* Hello? Are you there? */ + printf_stdebug("\003"); /* ^C wakes up dbug */ + + expect_prompt(1); + + if (from_tty) + printf("Remote %s connected to %s\n", target_shortname, + dev_name); +} + +/* Close out all files and local state before this target loses control. */ + +static void +st2000_close (quitting) + int quitting; +{ + SERIAL_CLOSE(st2000_desc); + +#if defined (LOG_FILE) + if (log_file) { + if (ferror(log_file)) + fprintf(stderr, "Error writing log file.\n"); + if (fclose(log_file) != 0) + fprintf(stderr, "Error closing log file.\n"); + } +#endif +} + +/* Terminate the open connection to the remote debugger. + Use this when you want to detach and do something else + with your gdb. */ +static void +st2000_detach (from_tty) + int from_tty; +{ + pop_target(); /* calls st2000_close to do the real work */ + if (from_tty) + printf ("Ending remote %s debugging\n", target_shortname); +} + +/* Tell the remote machine to resume. */ + +static void +st2000_resume (pid, step, sig) + int pid, step; + enum target_signal sig; +{ + if (step) + { + printf_stdebug ("ST\r"); + /* Wait for the echo. */ + expect ("ST\r", 1); + } + else + { + printf_stdebug ("GO\r"); + /* Swallow the echo. */ + expect ("GO\r", 1); + } +} + +/* Wait until the remote machine stops, then return, + storing status in STATUS just as `wait' would. */ + +static int +st2000_wait (status) + struct target_waitstatus *status; +{ + int old_timeout = timeout; + + status->kind = TARGET_WAITKIND_EXITED; + status->value.integer = 0; + + timeout = 0; /* Don't time out -- user program is running. */ + + expect_prompt(0); /* Wait for prompt, outputting extraneous text */ + + status->kind = TARGET_WAITKIND_STOPPED; + status->value.sig = TARGET_SIGNAL_TRAP; + + timeout = old_timeout; + + return 0; +} + +/* Return the name of register number REGNO in the form input and output by + STDEBUG. Currently, REGISTER_NAMES just happens to contain exactly what + STDEBUG wants. Lets take advantage of that just as long as possible! */ + +static char * +get_reg_name (regno) + int regno; +{ + static char buf[50]; + const char *p; + char *b; + + b = buf; + + for (p = REGISTER_NAME (regno); *p; p++) + *b++ = toupper(*p); + *b = '\000'; + + return buf; +} + +/* Read the remote registers into the block REGS. */ + +static void +st2000_fetch_registers () +{ + int regno; + + /* Yeah yeah, I know this is horribly inefficient. But it isn't done + very often... I'll clean it up later. */ + + for (regno = 0; regno <= PC_REGNUM; regno++) + st2000_fetch_register(regno); +} + +/* Fetch register REGNO, or all registers if REGNO is -1. + Returns errno value. */ +static void +st2000_fetch_register (regno) + int regno; +{ + if (regno == -1) + st2000_fetch_registers (); + else + { + char *name = get_reg_name (regno); + printf_stdebug ("DR %s\r", name); + expect (name, 1); + expect (" : ", 1); + get_hex_regs (1, regno); + expect_prompt (1); + } + return; +} + +/* Store the remote registers from the contents of the block REGS. */ + +static void +st2000_store_registers () +{ + int regno; + + for (regno = 0; regno <= PC_REGNUM; regno++) + st2000_store_register(regno); + + registers_changed (); +} + +/* Store register REGNO, or all if REGNO == 0. + Return errno value. */ +static void +st2000_store_register (regno) + int regno; +{ + if (regno == -1) + st2000_store_registers (); + else + { + printf_stdebug ("PR %s %x\r", get_reg_name (regno), + read_register (regno)); + + expect_prompt (1); + } +} + +/* Get ready to modify the registers array. On machines which store + individual registers, this doesn't need to do anything. On machines + which store all the registers in one fell swoop, this makes sure + that registers contains all the registers from the program being + debugged. */ + +static void +st2000_prepare_to_store () +{ + /* Do nothing, since we can store individual regs */ +} + +static void +st2000_files_info () +{ + printf ("\tAttached to %s at %d baud.\n", + dev_name, baudrate); +} + +/* Copy LEN bytes of data from debugger memory at MYADDR + to inferior's memory at MEMADDR. Returns length moved. */ +static int +st2000_write_inferior_memory (memaddr, myaddr, len) + CORE_ADDR memaddr; + unsigned char *myaddr; + int len; +{ + int i; + + for (i = 0; i < len; i++) + { + printf_stdebug ("PM.B %x %x\r", memaddr + i, myaddr[i]); + expect_prompt (1); + } + return len; +} + +/* Read LEN bytes from inferior memory at MEMADDR. Put the result + at debugger address MYADDR. Returns length moved. */ +static int +st2000_read_inferior_memory(memaddr, myaddr, len) + CORE_ADDR memaddr; + char *myaddr; + int len; +{ + int i; + + /* Number of bytes read so far. */ + int count; + + /* Starting address of this pass. */ + unsigned long startaddr; + + /* Number of bytes to read in this pass. */ + int len_this_pass; + + /* Note that this code works correctly if startaddr is just less + than UINT_MAX (well, really CORE_ADDR_MAX if there was such a + thing). That is, something like + st2000_read_bytes (CORE_ADDR_MAX - 4, foo, 4) + works--it never adds len to memaddr and gets 0. */ + /* However, something like + st2000_read_bytes (CORE_ADDR_MAX - 3, foo, 4) + doesn't need to work. Detect it and give up if there's an attempt + to do that. */ + if (((memaddr - 1) + len) < memaddr) { + errno = EIO; + return 0; + } + + startaddr = memaddr; + count = 0; + while (count < len) + { + len_this_pass = 16; + if ((startaddr % 16) != 0) + len_this_pass -= startaddr % 16; + if (len_this_pass > (len - count)) + len_this_pass = (len - count); + + printf_stdebug ("DI.L %x %x\r", startaddr, len_this_pass); + expect (": ", 1); + + for (i = 0; i < len_this_pass; i++) + get_hex_byte (&myaddr[count++]); + + expect_prompt (1); + + startaddr += len_this_pass; + } + return len; +} + +/* FIXME-someday! Merge these two. */ +static int +st2000_xfer_inferior_memory (memaddr, myaddr, len, write, target) + CORE_ADDR memaddr; + char *myaddr; + int len; + int write; + struct target_ops *target; /* ignored */ +{ + if (write) + return st2000_write_inferior_memory (memaddr, myaddr, len); + else + return st2000_read_inferior_memory (memaddr, myaddr, len); +} + +static void +st2000_kill (args, from_tty) + char *args; + int from_tty; +{ + return; /* Ignore attempts to kill target system */ +} + +/* Clean up when a program exits. + + The program actually lives on in the remote processor's RAM, and may be + run again without a download. Don't leave it full of breakpoint + instructions. */ + +static void +st2000_mourn_inferior () +{ + remove_breakpoints (); + unpush_target (&st2000_ops); + generic_mourn_inferior (); /* Do all the proper things now */ +} + +#define MAX_STDEBUG_BREAKPOINTS 16 + +static CORE_ADDR breakaddr[MAX_STDEBUG_BREAKPOINTS] = {0}; + +static int +st2000_insert_breakpoint (addr, shadow) + CORE_ADDR addr; + char *shadow; +{ + int i; + CORE_ADDR bp_addr = addr; + int bp_size = 0; + + BREAKPOINT_FROM_PC (&bp_addr, &bp_size); + + for (i = 0; i <= MAX_STDEBUG_BREAKPOINTS; i++) + if (breakaddr[i] == 0) + { + breakaddr[i] = addr; + + st2000_read_inferior_memory (bp_addr, shadow, bp_size); + printf_stdebug("BR %x H\r", addr); + expect_prompt(1); + return 0; + } + + fprintf(stderr, "Too many breakpoints (> 16) for STDBUG\n"); + return 1; +} + +static int +st2000_remove_breakpoint (addr, shadow) + CORE_ADDR addr; + char *shadow; +{ + int i; + + for (i = 0; i < MAX_STDEBUG_BREAKPOINTS; i++) + if (breakaddr[i] == addr) + { + breakaddr[i] = 0; + + printf_stdebug("CB %d\r", i); + expect_prompt(1); + return 0; + } + + fprintf(stderr, "Can't find breakpoint associated with 0x%x\n", addr); + return 1; +} + + +/* Put a command string, in args, out to STDBUG. Output from STDBUG is placed + on the users terminal until the prompt is seen. */ + +static void +st2000_command (args, fromtty) + char *args; + int fromtty; +{ + if (!st2000_desc) + error("st2000 target not open."); + + if (!args) + error("Missing command."); + + printf_stdebug("%s\r", args); + expect_prompt(0); +} + +/* Connect the user directly to STDBUG. This command acts just like the + 'cu' or 'tip' command. Use ~. or ~^D to break out. */ + +/*static struct ttystate ttystate;*/ + +static void +cleanup_tty() +{ + printf("\r\n[Exiting connect mode]\r\n"); +/* SERIAL_RESTORE(0, &ttystate);*/ +} + +#if 0 +/* This all should now be in serial.c */ + +static void +connect_command (args, fromtty) + char *args; + int fromtty; +{ + fd_set readfds; + int numfds; + int c; + char cur_esc = 0; + + dont_repeat(); + + if (st2000_desc < 0) + error("st2000 target not open."); + + if (args) + fprintf("This command takes no args. They have been ignored.\n"); + + printf("[Entering connect mode. Use ~. or ~^D to escape]\n"); + + serial_raw(0, &ttystate); + + make_cleanup(cleanup_tty, 0); + + FD_ZERO(&readfds); + + while (1) + { + do + { + FD_SET(0, &readfds); + FD_SET(st2000_desc, &readfds); + numfds = select(sizeof(readfds)*8, &readfds, 0, 0, 0); + } + while (numfds == 0); + + if (numfds < 0) + perror_with_name("select"); + + if (FD_ISSET(0, &readfds)) + { /* tty input, send to stdebug */ + c = getchar(); + if (c < 0) + perror_with_name("connect"); + + printf_stdebug("%c", c); + switch (cur_esc) + { + case 0: + if (c == '\r') + cur_esc = c; + break; + case '\r': + if (c == '~') + cur_esc = c; + else + cur_esc = 0; + break; + case '~': + if (c == '.' || c == '\004') + return; + else + cur_esc = 0; + } + } + + if (FD_ISSET(st2000_desc, &readfds)) + { + while (1) + { + c = readchar(0); + if (c < 0) + break; + putchar(c); + } + fflush(stdout); + } + } +} +#endif /* 0 */ + +/* Define the target subroutine names */ + +struct target_ops st2000_ops ; + +static void +init_st2000_ops(void) +{ + st2000_ops.to_shortname = "st2000"; + st2000_ops.to_longname = "Remote serial Tandem ST2000 target"; + st2000_ops.to_doc = "Use a remote computer running STDEBUG connected by a serial line;\n\ +or a network connection.\n\ +Arguments are the name of the device for the serial line,\n\ +the speed to connect at in bits per second." ; + st2000_ops.to_open = st2000_open; + st2000_ops.to_close = st2000_close; + st2000_ops.to_attach = 0; + st2000_run_ops.to_post_attach = NULL; + st2000_ops.to_require_attach = NULL; + st2000_ops.to_detach = st2000_detach; + st2000_ops.to_require_detach = NULL; + st2000_ops.to_resume = st2000_resume; + st2000_ops.to_wait = st2000_wait; + st2000_ops.to_post_wait = NULL; + st2000_ops.to_fetch_registers = st2000_fetch_register; + st2000_ops.to_store_registers = st2000_store_register; + st2000_ops.to_prepare_to_store = st2000_prepare_to_store; + st2000_ops.to_xfer_memory = st2000_xfer_inferior_memory; + st2000_ops.to_files_info = st2000_files_info; + st2000_ops.to_insert_breakpoint = st2000_insert_breakpoint; + st2000_ops.to_remove_breakpoint = st2000_remove_breakpoint; /* Breakpoints */ + st2000_ops.to_terminal_init = 0; + st2000_ops.to_terminal_inferior = 0; + st2000_ops.to_terminal_ours_for_output = 0; + st2000_ops.to_terminal_ours = 0; + st2000_ops.to_terminal_info = 0; /* Terminal handling */ + st2000_ops.to_kill = st2000_kill; + st2000_ops.to_load = 0; /* load */ + st2000_ops.to_lookup_symbol = 0; /* lookup_symbol */ + st2000_ops.to_create_inferior = st2000_create_inferior; + st2000_ops.to_post_startup_inferior = NULL; + st2000_ops.to_acknowledge_created_inferior = NULL; + st2000_ops.to_clone_and_follow_inferior = NULL; + st2000_ops.to_post_follow_inferior_by_clone = NULL; + st2000_run_ops.to_insert_fork_catchpoint = NULL; + st2000_run_ops.to_remove_fork_catchpoint = NULL; + st2000_run_ops.to_insert_vfork_catchpoint = NULL; + st2000_run_ops.to_remove_vfork_catchpoint = NULL; + st2000_ops.to_has_forked = NULL; + st2000_ops.to_has_vforked = NULL; + st2000_run_ops.to_can_follow_vfork_prior_to_exec = NULL; + st2000_ops.to_post_follow_vfork = NULL; + st2000_run_ops.to_insert_exec_catchpoint = NULL; + st2000_run_ops.to_remove_exec_catchpoint = NULL; + st2000_run_ops.to_has_execd = NULL; + st2000_run_ops.to_reported_exec_events_per_exec_call = NULL; + st2000_run_ops.to_has_exited = NULL; + st2000_ops.to_mourn_inferior = st2000_mourn_inferior; + st2000_ops.to_can_run = 0; /* can_run */ + st2000_ops.to_notice_signals = 0; /* notice_signals */ + st2000_ops.to_thread_alive = 0; /* thread alive */ + st2000_ops.to_stop = 0; /* to_stop */ + st2000_ops.to_pid_to_exec_file = NULL; + st2000_run_ops.to_core_file_to_sym_file = NULL; + st2000_ops.to_stratum = process_stratum; + st2000_ops.DONT_USE = 0; /* next */ + st2000_ops.to_has_all_memory = 1; + st2000_ops.to_has_memory = 1; + st2000_ops.to_has_stack = 1; + st2000_ops.to_has_registers = 1; + st2000_ops.to_has_execution = 1; /* all mem, mem, stack, regs, exec */ + st2000_ops.to_sections = 0; + st2000_ops.to_sections_end = 0; /* Section pointers */ + st2000_ops.to_magic = OPS_MAGIC; /* Always the last thing */ +} ; + +void +_initialize_remote_st2000 () +{ + init_st2000_ops() ; + add_target (&st2000_ops); + add_com ("st2000 ", class_obscure, st2000_command, + "Send a command to the STDBUG monitor."); + add_com ("connect", class_obscure, connect_command, + "Connect the terminal directly up to the STDBUG command monitor.\n\ +Use ~. or ~^D to break out."); +} -- cgit v1.1