From 7ca9f392fc1c33d83746ffab1f218b149a80d586 Mon Sep 17 00:00:00 2001 From: Andrew Cagney Date: Sat, 1 Feb 2003 20:51:06 +0000 Subject: 2003-02-01 Andrew Cagney * main.c (captured_main): Delete #ifdef ADDITIONAL_OPTIONS, ADDITIONAL_OPTION_CASES, and ADDITIONAL_OPTION_HANDLER code. (print_gdb_help): Delete #ifdef ADDITIONAL_OPTION_HELP code. * stabsread.c (DBX_PARM_SYMBOL_CLASS): Delete macro. (define_symbol): Update. * symfile.c (generic_load): Remove references to nindy. * symtab.c: Remove references to nindy. Index: doc/ChangeLog 2003-02-01 Andrew Cagney * gdbint.texinfo (Target Architecture Definition): Delete description of ADDITIONAL_OPTIONS, ADDITIONAL_OPTION_CASES, ADDITIONAL_OPTION_HANDLER, and ADDITIONAL_OPTION_HELP, and BEFORE_MAIN_LOOP_HOOK, and DBX_PARM_SYMBOL_CLASS along with references to nindy and i960. * gdb.texinfo (i960): Delete all references to i960 and nindy. --- gdb/doc/ChangeLog | 9 ++++ gdb/doc/gdb.texinfo | 123 ------------------------------------------------- gdb/doc/gdbint.texinfo | 33 +------------ 3 files changed, 11 insertions(+), 154 deletions(-) (limited to 'gdb/doc') diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog index 8d66b91..832ac37 100644 --- a/gdb/doc/ChangeLog +++ b/gdb/doc/ChangeLog @@ -1,6 +1,15 @@ 2003-02-01 Andrew Cagney * gdbint.texinfo (Target Architecture Definition): Delete + description of ADDITIONAL_OPTIONS, ADDITIONAL_OPTION_CASES, + ADDITIONAL_OPTION_HANDLER, and ADDITIONAL_OPTION_HELP, and + BEFORE_MAIN_LOOP_HOOK, and DBX_PARM_SYMBOL_CLASS along with + references to nindy and i960. + * gdb.texinfo (i960): Delete all references to i960 and nindy. + +2003-02-01 Andrew Cagney + + * gdbint.texinfo (Target Architecture Definition): Delete FLOAT_INFO. 2003-01-30 Andrew Cagney diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo index 58c254d..b3dd7a7 100644 --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -11414,7 +11414,6 @@ configurations. * ARM:: ARM * H8/300:: Hitachi H8/300 * H8/500:: Hitachi H8/500 -* i960:: Intel i960 * M32R/D:: Mitsubishi M32R/D * M68K:: Motorola M68K * MIPS Embedded:: MIPS Embedded @@ -11668,128 +11667,6 @@ memory}. The accepted values for @var{mod} are @code{small}, @end table -@node i960 -@subsection Intel i960 - -@table @code - -@kindex target mon960 -@item target mon960 @var{dev} -MON960 monitor for Intel i960. - -@kindex target nindy -@item target nindy @var{devicename} -An Intel 960 board controlled by a Nindy Monitor. @var{devicename} is -the name of the serial device to use for the connection, e.g. -@file{/dev/ttya}. - -@end table - -@cindex Nindy -@cindex i960 -@dfn{Nindy} is a ROM Monitor program for Intel 960 target systems. When -@value{GDBN} is configured to control a remote Intel 960 using Nindy, you can -tell @value{GDBN} how to connect to the 960 in several ways: - -@itemize @bullet -@item -Through command line options specifying serial port, version of the -Nindy protocol, and communications speed; - -@item -By responding to a prompt on startup; - -@item -By using the @code{target} command at any point during your @value{GDBN} -session. @xref{Target Commands, ,Commands for managing targets}. - -@end itemize - -@cindex download to Nindy-960 -With the Nindy interface to an Intel 960 board, @code{load} -downloads @var{filename} to the 960 as well as adding its symbols in -@value{GDBN}. - -@menu -* Nindy Startup:: Startup with Nindy -* Nindy Options:: Options for Nindy -* Nindy Reset:: Nindy reset command -@end menu - -@node Nindy Startup -@subsubsection Startup with Nindy - -If you simply start @code{@value{GDBP}} without using any command-line -options, you are prompted for what serial port to use, @emph{before} you -reach the ordinary @value{GDBN} prompt: - -@smallexample -Attach /dev/ttyNN -- specify NN, or "quit" to quit: -@end smallexample - -@noindent -Respond to the prompt with whatever suffix (after @samp{/dev/tty}) -identifies the serial port you want to use. You can, if you choose, -simply start up with no Nindy connection by responding to the prompt -with an empty line. If you do this and later wish to attach to Nindy, -use @code{target} (@pxref{Target Commands, ,Commands for managing targets}). - -@node Nindy Options -@subsubsection Options for Nindy - -These are the startup options for beginning your @value{GDBN} session with a -Nindy-960 board attached: - -@table @code -@item -r @var{port} -Specify the serial port name of a serial interface to be used to connect -to the target system. This option is only available when @value{GDBN} is -configured for the Intel 960 target architecture. You may specify -@var{port} as any of: a full pathname (e.g. @samp{-r /dev/ttya}), a -device name in @file{/dev} (e.g. @samp{-r ttya}), or simply the unique -suffix for a specific @code{tty} (e.g. @samp{-r a}). - -@item -O -(An uppercase letter ``O'', not a zero.) Specify that @value{GDBN} should use -the ``old'' Nindy monitor protocol to connect to the target system. -This option is only available when @value{GDBN} is configured for the Intel 960 -target architecture. - -@quotation -@emph{Warning:} if you specify @samp{-O}, but are actually trying to -connect to a target system that expects the newer protocol, the connection -fails, appearing to be a speed mismatch. @value{GDBN} repeatedly -attempts to reconnect at several different line speeds. You can abort -this process with an interrupt. -@end quotation - -@item -brk -Specify that @value{GDBN} should first send a @code{BREAK} signal to the target -system, in an attempt to reset it, before connecting to a Nindy target. - -@quotation -@emph{Warning:} Many target systems do not have the hardware that this -requires; it only works with a few boards. -@end quotation -@end table - -The standard @samp{-b} option controls the line speed used on the serial -port. - -@c @group -@node Nindy Reset -@subsubsection Nindy reset command - -@table @code -@item reset -@kindex reset -For a Nindy target, this command sends a ``break'' to the remote target -system; this is only useful if the target has been equipped with a -circuit to perform a hard reset (or some other interesting action) when -a break is detected. -@end table -@c @end group - @node M32R/D @subsection Mitsubishi M32R/D diff --git a/gdb/doc/gdbint.texinfo b/gdb/doc/gdbint.texinfo index a68763b..cf35a28 100644 --- a/gdb/doc/gdbint.texinfo +++ b/gdb/doc/gdbint.texinfo @@ -2295,9 +2295,8 @@ always linked in.) @item USG Means that System V (prior to SVR4) include files are in use. (FIXME: -This symbol is abused in @file{infrun.c}, @file{regex.c}, -@file{remote-nindy.c}, and @file{utils.c} for other things, at the -moment.) +This symbol is abused in @file{infrun.c}, @file{regex.c}, and +@file{utils.c} for other things, at the moment.) @item lint Define this to help placate @code{lint} in some situations. @@ -2913,18 +2912,6 @@ machine. @table @code -@item ADDITIONAL_OPTIONS -@itemx ADDITIONAL_OPTION_CASES -@itemx ADDITIONAL_OPTION_HANDLER -@itemx ADDITIONAL_OPTION_HELP -@findex ADDITIONAL_OPTION_HELP -@findex ADDITIONAL_OPTION_HANDLER -@findex ADDITIONAL_OPTION_CASES -@findex ADDITIONAL_OPTIONS -These are a set of macros that allow the addition of additional command -line options to @value{GDBN}. They are currently used only for the unsupported -i960 Nindy target, and should not be used in any other configuration. - @item ADDR_BITS_REMOVE (addr) @findex ADDR_BITS_REMOVE If a raw machine instruction address includes any bits that are not @@ -2990,16 +2977,6 @@ This macro may safely assume that @var{type} is either a pointer or a C@t{++} reference type. @xref{Target Architecture Definition, , Pointers Are Not Always Addresses}. -@item BEFORE_MAIN_LOOP_HOOK -@findex BEFORE_MAIN_LOOP_HOOK -Define this to expand into any code that you want to execute before the -main loop starts. Although this is not, strictly speaking, a target -conditional, that is how it is currently being used. Note that if a -configuration were to define it one way for a host and a different way -for the target, @value{GDBN} will probably not compile, let alone run -correctly. This macro is currently used only for the unsupported i960 Nindy -target, and should not be used in any other configuration. - @item BELIEVE_PCC_PROMOTION @findex BELIEVE_PCC_PROMOTION Define if the compiler promotes a @code{short} or @code{char} @@ -3150,12 +3127,6 @@ Return non-zero if register @var{regnum} can represent data values in a non-standard form. @xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}. -@item DBX_PARM_SYMBOL_CLASS -@findex DBX_PARM_SYMBOL_CLASS -Hook for the @code{SYMBOL_CLASS} of a parameter when decoding DBX symbol -information. In the i960, parameters can be stored as locals or as -args, depending on the type of the debug record. - @item DECR_PC_AFTER_BREAK @findex DECR_PC_AFTER_BREAK Define this to be the amount by which to decrement the PC after the -- cgit v1.1