From a85d7ed0f0b65504f7d8027319d1a4a9adb9d8c1 Mon Sep 17 00:00:00 2001 From: Nick Clifton Date: Sat, 10 Feb 2001 00:58:38 +0000 Subject: Add s390 support --- gas/ChangeLog | 7 + gas/Makefile.am | 15 + gas/Makefile.in | 18 + gas/config.in | 6 + gas/config/tc-s390.c | 1756 ++++++++++++++++++++++++++++++++++++++++++++++++++ gas/config/tc-s390.h | 113 ++++ gas/configure | 352 +++++----- gas/configure.in | 11 + gas/po/POTFILES.in | 2 + gas/po/gas.pot | 1196 ++++++++++++++++++---------------- 10 files changed, 2759 insertions(+), 717 deletions(-) create mode 100644 gas/config/tc-s390.c create mode 100644 gas/config/tc-s390.h (limited to 'gas') diff --git a/gas/ChangeLog b/gas/ChangeLog index c6babbe..f3f3800 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,10 @@ +2001-02-09 Schwidefsky + + * Makefile.am: Add linux target for S/390. + * configure.in: Likewise. + * config/tc-s390.c: New file. + * config/tc-s390.h: New file. + 2001-02-09 Alexandre Oliva * config/tc-sh.c (md_pseudo_table): Add uaquad. Use s_uacons for diff --git a/gas/Makefile.am b/gas/Makefile.am index 47b6253..f6702b2 100644 --- a/gas/Makefile.am +++ b/gas/Makefile.am @@ -65,6 +65,7 @@ CPU_TYPES = \ ns32k \ pj \ ppc \ + s390 \ sh \ sparc \ tahoe \ @@ -246,6 +247,7 @@ TARGET_CPU_CFILES = \ config/tc-ns32k.c \ config/tc-pj.c \ config/tc-ppc.c \ + config/tc-s390.c \ config/tc-sh.c \ config/tc-sparc.c \ config/tc-tahoe.c \ @@ -286,6 +288,7 @@ TARGET_CPU_HFILES = \ config/tc-ns32k.h \ config/tc-pj.h \ config/tc-ppc.h \ + config/tc-s390.h \ config/tc-sh.h \ config/tc-sparc.h \ config/tc-tahoe.h \ @@ -1180,6 +1183,11 @@ DEPTC_ppc_elf = $(srcdir)/config/obj-elf.h $(BFDDIR)/elf-bfd.h \ $(INCDIR)/bfdlink.h $(srcdir)/config/tc-ppc.h subsegs.h \ $(INCDIR)/obstack.h $(INCDIR)/opcode/ppc.h $(INCDIR)/elf/ppc.h \ $(INCDIR)/elf/reloc-macros.h +DEPTC_s390_elf = $(srcdir)/config/obj-elf.h $(BFDDIR)/elf-bfd.h \ + $(INCDIR)/elf/common.h $(INCDIR)/elf/internal.h $(INCDIR)/elf/external.h \ + $(INCDIR)/bfdlink.h $(srcdir)/config/tc-s390.h subsegs.h \ + $(INCDIR)/obstack.h $(INCDIR)/opcode/s390.h $(INCDIR)/elf/s390.h \ + $(INCDIR)/elf/reloc-macros.h DEPTC_sh_coff = $(srcdir)/config/obj-coff.h $(srcdir)/config/tc-sh.h \ $(INCDIR)/coff/internal.h $(INCDIR)/coff/sh.h $(BFDDIR)/libcoff.h \ $(INCDIR)/bfdlink.h subsegs.h $(INCDIR)/obstack.h $(srcdir)/../opcodes/sh-opc.h \ @@ -1507,6 +1515,10 @@ DEPOBJ_ppc_elf = $(srcdir)/config/obj-elf.h $(BFDDIR)/elf-bfd.h \ $(INCDIR)/bfdlink.h $(srcdir)/config/tc-ppc.h subsegs.h \ $(INCDIR)/obstack.h $(INCDIR)/elf/ppc.h $(INCDIR)/elf/reloc-macros.h \ $(INCDIR)/aout/aout64.h +DEPOBJ_s390_elf = $(srcdir)/config/obj-elf.h $(BFDDIR)/elf-bfd.h \ + $(INCDIR)/elf/common.h $(INCDIR)/elf/internal.h $(INCDIR)/elf/external.h \ + $(INCDIR)/bfdlink.h $(srcdir)/config/tc-s390.h subsegs.h \ + $(INCDIR)/obstack.h $(INCDIR)/aout/aout64.h DEPOBJ_sh_coff = $(srcdir)/config/obj-coff.h $(srcdir)/config/tc-sh.h \ $(INCDIR)/coff/internal.h $(INCDIR)/coff/sh.h $(BFDDIR)/libcoff.h \ $(INCDIR)/bfdlink.h $(INCDIR)/obstack.h subsegs.h @@ -1772,6 +1784,9 @@ DEP_ppc_coff = $(srcdir)/config/obj-coff.h $(srcdir)/config/tc-ppc.h \ DEP_ppc_elf = $(srcdir)/config/obj-elf.h $(BFDDIR)/elf-bfd.h \ $(INCDIR)/elf/common.h $(INCDIR)/elf/internal.h $(INCDIR)/elf/external.h \ $(INCDIR)/bfdlink.h $(srcdir)/config/tc-ppc.h +DEP_s390_elf = $(srcdir)/config/obj-elf.h $(BFDDIR)/elf-bfd.h \ + $(INCDIR)/elf/common.h $(INCDIR)/elf/internal.h $(INCDIR)/elf/external.h \ + $(INCDIR)/bfdlink.h $(srcdir)/config/tc-s390.h DEP_sh_coff = $(srcdir)/config/obj-coff.h $(srcdir)/config/tc-sh.h \ $(INCDIR)/coff/internal.h $(INCDIR)/coff/sh.h $(BFDDIR)/libcoff.h \ $(INCDIR)/bfdlink.h diff --git a/gas/Makefile.in b/gas/Makefile.in index bd1a89e..493fb0a 100644 --- a/gas/Makefile.in +++ b/gas/Makefile.in @@ -176,6 +176,7 @@ CPU_TYPES = \ ns32k \ pj \ ppc \ + s390 \ sh \ sparc \ tahoe \ @@ -363,6 +364,7 @@ TARGET_CPU_CFILES = \ config/tc-ns32k.c \ config/tc-pj.c \ config/tc-ppc.c \ + config/tc-s390.c \ config/tc-sh.c \ config/tc-sparc.c \ config/tc-tahoe.c \ @@ -404,6 +406,7 @@ TARGET_CPU_HFILES = \ config/tc-ns32k.h \ config/tc-pj.h \ config/tc-ppc.h \ + config/tc-s390.h \ config/tc-sh.h \ config/tc-sparc.h \ config/tc-tahoe.h \ @@ -953,6 +956,12 @@ DEPTC_ppc_elf = $(srcdir)/config/obj-elf.h $(BFDDIR)/elf-bfd.h \ $(INCDIR)/obstack.h $(INCDIR)/opcode/ppc.h $(INCDIR)/elf/ppc.h \ $(INCDIR)/elf/reloc-macros.h +DEPTC_s390_elf = $(srcdir)/config/obj-elf.h $(BFDDIR)/elf-bfd.h \ + $(INCDIR)/elf/common.h $(INCDIR)/elf/internal.h $(INCDIR)/elf/external.h \ + $(INCDIR)/bfdlink.h $(srcdir)/config/tc-s390.h subsegs.h \ + $(INCDIR)/obstack.h $(INCDIR)/opcode/s390.h $(INCDIR)/elf/s390.h \ + $(INCDIR)/elf/reloc-macros.h + DEPTC_sh_coff = $(srcdir)/config/obj-coff.h $(srcdir)/config/tc-sh.h \ $(INCDIR)/coff/internal.h $(INCDIR)/coff/sh.h $(BFDDIR)/libcoff.h \ $(INCDIR)/bfdlink.h subsegs.h $(INCDIR)/obstack.h $(srcdir)/../opcodes/sh-opc.h \ @@ -1373,6 +1382,11 @@ DEPOBJ_ppc_elf = $(srcdir)/config/obj-elf.h $(BFDDIR)/elf-bfd.h \ $(INCDIR)/obstack.h $(INCDIR)/elf/ppc.h $(INCDIR)/elf/reloc-macros.h \ $(INCDIR)/aout/aout64.h +DEPOBJ_s390_elf = $(srcdir)/config/obj-elf.h $(BFDDIR)/elf-bfd.h \ + $(INCDIR)/elf/common.h $(INCDIR)/elf/internal.h $(INCDIR)/elf/external.h \ + $(INCDIR)/bfdlink.h $(srcdir)/config/tc-s390.h subsegs.h \ + $(INCDIR)/obstack.h $(INCDIR)/aout/aout64.h + DEPOBJ_sh_coff = $(srcdir)/config/obj-coff.h $(srcdir)/config/tc-sh.h \ $(INCDIR)/coff/internal.h $(INCDIR)/coff/sh.h $(BFDDIR)/libcoff.h \ $(INCDIR)/bfdlink.h $(INCDIR)/obstack.h subsegs.h @@ -1730,6 +1744,10 @@ DEP_ppc_elf = $(srcdir)/config/obj-elf.h $(BFDDIR)/elf-bfd.h \ $(INCDIR)/elf/common.h $(INCDIR)/elf/internal.h $(INCDIR)/elf/external.h \ $(INCDIR)/bfdlink.h $(srcdir)/config/tc-ppc.h +DEP_s390_elf = $(srcdir)/config/obj-elf.h $(BFDDIR)/elf-bfd.h \ + $(INCDIR)/elf/common.h $(INCDIR)/elf/internal.h $(INCDIR)/elf/external.h \ + $(INCDIR)/bfdlink.h $(srcdir)/config/tc-s390.h + DEP_sh_coff = $(srcdir)/config/obj-coff.h $(srcdir)/config/tc-sh.h \ $(INCDIR)/coff/internal.h $(INCDIR)/coff/sh.h $(BFDDIR)/libcoff.h \ $(INCDIR)/bfdlink.h diff --git a/gas/config.in b/gas/config.in index fc7ef2b..8477871 100644 --- a/gas/config.in +++ b/gas/config.in @@ -163,6 +163,12 @@ /* Default architecture. */ #undef DEFAULT_ARCH +/* Default architecture. */ +#undef DEFAULT_ARCH + +/* Default architecture. */ +#undef DEFAULT_ARCH + /* Using cgen code? */ #undef USING_CGEN diff --git a/gas/config/tc-s390.c b/gas/config/tc-s390.c new file mode 100644 index 0000000..329ac1a --- /dev/null +++ b/gas/config/tc-s390.c @@ -0,0 +1,1756 @@ +/* tc-s390.c -- Assemble for the S390 + Copyright (C) 2000 Free Software Foundation, Inc. + Contributed by Martin Schwidefsky (schwidefsky@de.ibm.com). + + This file is part of GAS, the GNU Assembler. + + GAS is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GAS is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GAS; see the file COPYING. If not, write to the Free + Software Foundation, 59 Temple Place - Suite 330, Boston, MA + 02111-1307, USA. */ + +#include +#include +#include "as.h" +#include "subsegs.h" +#include "struc-symbol.h" + +#include "opcode/s390.h" +#include "elf/s390.h" + +/* The default architecture */ +#ifndef DEFAULT_ARCH +#define DEFAULT_ARCH "s390" +#endif +static char *default_arch = DEFAULT_ARCH; +/* Either 32 or 64, selects file format. */ +static int s390_arch_size; +/* Current architecture. Start with the smallest instruction set */ +static enum s390_opcode_arch_val current_architecture = S390_OPCODE_ESA; +static int current_arch_mask = 1 << S390_OPCODE_ESA; +static int current_arch_requested = 0; + +/* Whether to use user friendly register names. Default is true. */ +#ifndef TARGET_REG_NAMES_P +#define TARGET_REG_NAMES_P true +#endif + +static boolean reg_names_p = TARGET_REG_NAMES_P; + +/* Generic assembler global variables which must be defined by all + targets. */ + +const char comment_chars[] = "#"; + +/* Characters which start a comment at the beginning of a line. */ +const char line_comment_chars[] = "#"; + +/* Characters which may be used to separate multiple commands on a + single line. */ +const char line_separator_chars[] = ";"; + +/* Characters which are used to indicate an exponent in a floating + point number. */ +const char EXP_CHARS[] = "eE"; + +/* Characters which mean that a number is a floating point constant, + as in 0d1.0. */ +const char FLT_CHARS[] = "dD"; + +/* The target specific pseudo-ops which we support. */ + +/* Define the prototypes for the pseudo-ops */ +static void s390_byte PARAMS ((int)); +static void s390_elf_cons PARAMS ((int)); +static void s390_bss PARAMS ((int)); +static void s390_insn PARAMS ((int)); +static void s390_literals PARAMS ((int)); + +const pseudo_typeS md_pseudo_table[] = +{ + { "align", s_align_bytes, 0 }, + /* Pseudo-ops which must be defined. */ + { "bss", s390_bss, 0 }, + { "insn", s390_insn, 0 }, + /* Pseudo-ops which must be overridden. */ + { "byte", s390_byte, 0 }, + { "short", s390_elf_cons, 2 }, + { "long", s390_elf_cons, 4 }, + { "quad", s390_elf_cons, 8 }, + { "ltorg", s390_literals, 0 }, + { "string", stringer, 2 }, + { NULL, NULL, 0 } +}; + + +/* Structure to hold information about predefined registers. */ +struct pd_reg + { + char *name; + int value; + }; + +/* List of registers that are pre-defined: + + Each access register has a predefined name of the form: + a which has the value . + + Each control register has a predefined name of the form: + c which has the value . + + Each general register has a predefined name of the form: + r which has the value . + + Each floating point register a has predefined name of the form: + f which has the value . + + There are individual registers as well: + sp has the value 15 + lit has the value 12 + + The table is sorted. Suitable for searching by a binary search. */ + +static const struct pd_reg pre_defined_registers[] = +{ + { "a0", 0 }, /* Access registers */ + { "a1", 1 }, + { "a10", 10 }, + { "a11", 11 }, + { "a12", 12 }, + { "a13", 13 }, + { "a14", 14 }, + { "a15", 15 }, + { "a2", 2 }, + { "a3", 3 }, + { "a4", 4 }, + { "a5", 5 }, + { "a6", 6 }, + { "a7", 7 }, + { "a8", 8 }, + { "a9", 9 }, + + { "c0", 0 }, /* Control registers */ + { "c1", 1 }, + { "c10", 10 }, + { "c11", 11 }, + { "c12", 12 }, + { "c13", 13 }, + { "c14", 14 }, + { "c15", 15 }, + { "c2", 2 }, + { "c3", 3 }, + { "c4", 4 }, + { "c5", 5 }, + { "c6", 6 }, + { "c7", 7 }, + { "c8", 8 }, + { "c9", 9 }, + + { "f0", 0 }, /* Floating point registers */ + { "f1", 1 }, + { "f10", 10 }, + { "f11", 11 }, + { "f12", 12 }, + { "f13", 13 }, + { "f14", 14 }, + { "f15", 15 }, + { "f2", 2 }, + { "f3", 3 }, + { "f4", 4 }, + { "f5", 5 }, + { "f6", 6 }, + { "f7", 7 }, + { "f8", 8 }, + { "f9", 9 }, + + { "lit", 13 }, /* Pointer to literal pool */ + + { "r0", 0 }, /* General purpose registers */ + { "r1", 1 }, + { "r10", 10 }, + { "r11", 11 }, + { "r12", 12 }, + { "r13", 13 }, + { "r14", 14 }, + { "r15", 15 }, + { "r2", 2 }, + { "r3", 3 }, + { "r4", 4 }, + { "r5", 5 }, + { "r6", 6 }, + { "r7", 7 }, + { "r8", 8 }, + { "r9", 9 }, + + { "sp", 15 }, /* Stack pointer */ + +}; + +#define REG_NAME_CNT (sizeof(pre_defined_registers) / sizeof(struct pd_reg)) + +/* Given NAME, find the register number associated with that name, return + the integer value associated with the given name or -1 on failure. */ + +static int +reg_name_search (regs, regcount, name) + const struct pd_reg *regs; + int regcount; + const char *name; +{ + int middle, low, high; + int cmp; + + low = 0; + high = regcount - 1; + + do + { + middle = (low + high) / 2; + cmp = strcasecmp (name, regs[middle].name); + if (cmp < 0) + high = middle - 1; + else if (cmp > 0) + low = middle + 1; + else + return regs[middle].value; + } + while (low <= high); + + return -1; +} + + +/* + * Summary of register_name(). + * + * in: Input_line_pointer points to 1st char of operand. + * + * out: A expressionS. + * The operand may have been a register: in this case, X_op == O_register, + * X_add_number is set to the register number, and truth is returned. + * Input_line_pointer->(next non-blank) char after operand, or is in its + * original state. + */ + +static boolean +register_name (expressionP) + expressionS *expressionP; +{ + int reg_number; + char *name; + char *start; + char c; + + /* Find the spelling of the operand */ + start = name = input_line_pointer; + if (name[0] == '%' && isalpha (name[1])) + name = ++input_line_pointer; + else + return false; + + c = get_symbol_end (); + reg_number = reg_name_search (pre_defined_registers, REG_NAME_CNT, name); + + /* look to see if it's in the register table */ + if (reg_number >= 0) + { + expressionP->X_op = O_register; + expressionP->X_add_number = reg_number; + + /* make the rest nice */ + expressionP->X_add_symbol = NULL; + expressionP->X_op_symbol = NULL; + *input_line_pointer = c; /* put back the delimiting char */ + return true; + } + else + { + /* reset the line as if we had not done anything */ + *input_line_pointer = c; /* put back the delimiting char */ + input_line_pointer = start; /* reset input_line pointer */ + return false; + } +} + +/* Local variables. */ + +/* Opformat hash table. */ +static struct hash_control *s390_opformat_hash; + +/* Opcode hash table. */ +static struct hash_control *s390_opcode_hash; + +/* Flags to set in the elf header */ +static flagword s390_flags = 0; + +symbolS *GOT_symbol; /* Pre-defined "_GLOBAL_OFFSET_TABLE_" */ + +#ifndef WORKING_DOT_WORD +const int md_short_jump_size = 4; +const int md_long_jump_size = 4; +#endif + +CONST char *md_shortopts = "A:m:kVQ:"; +struct option md_longopts[] = { + {NULL, no_argument, NULL, 0} +}; +size_t md_longopts_size = sizeof(md_longopts); + +/* Initialize the default opcode arch and word size from the default + architecture name. */ +static void +init_default_arch () +{ + if (current_arch_requested) + return; + if (strcmp(default_arch, "s390") == 0) { + s390_arch_size = 32; + current_architecture = S390_OPCODE_ESA; + } else if (strcmp(default_arch, "s390x") == 0) { + s390_arch_size = 64; + current_architecture = S390_OPCODE_ESAME; + } else + as_fatal ("Invalid default architecture, broken assembler."); + current_arch_mask = 1 << current_architecture; +} + +/* Called by TARGET_FORMAT. */ +const char * +s390_target_format () +{ + /* We don't get a chance to initialize anything before we're called, + so handle that now. */ + if (! s390_arch_size) + init_default_arch (); + + return s390_arch_size == 64 ? "elf64-s390" : "elf32-s390"; +} + +int +md_parse_option (c, arg) + int c; + char *arg; +{ + switch (c) { + /* -k: Ignore for FreeBSD compatibility. */ + case 'k': + break; + case 'm': + if (arg != NULL && strcmp (arg, "regnames") == 0) + reg_names_p = true; + + else if (arg != NULL && strcmp (arg, "no-regnames") == 0) + reg_names_p = false; + + else { + as_bad (_("invalid switch -m%s"), arg); + return 0; + } + break; + + case 'A': + if (arg != NULL && strcmp (arg, "esa") == 0) { + current_architecture = S390_OPCODE_ESA; + s390_arch_size = 32; + } else if (arg != NULL && strcmp (arg, "esame") == 0) { + current_architecture = S390_OPCODE_ESAME; + s390_arch_size = 64; + } else + as_bad ("invalid architecture -A%s", arg); + current_arch_mask = 1 << current_architecture; + current_arch_requested = 1; + break; + + /* -V: SVR4 argument to print version ID. */ + case 'V': + print_version_id (); + break; + + /* -Qy, -Qn: SVR4 arguments controlling whether a .comment section + should be emitted or not. FIXME: Not implemented. */ + case 'Q': + break; + + default: + return 0; + } + + return 1; +} + +void +md_show_usage (stream) + FILE *stream; +{ + fprintf(stream, _("\ + S390 options:\n\ + -mregnames \tAllow symbolic names for registers\n\ + -mno-regnames\tDo not allow symbolic names for registers\n")); + fprintf(stream, _("\ + -V \tprint assembler version number\n\ + -Qy, -Qn \tignored\n")); +} + +/* This function is called when the assembler starts up. It is called + after the options have been parsed and the output file has been + opened. */ + +void +md_begin () +{ + register const struct s390_opcode *op; + const struct s390_opcode *op_end; + boolean dup_insn = false; + const char *retval; + + /* Set the ELF flags if desired. */ + if (s390_flags) + bfd_set_private_flags (stdoutput, s390_flags); + + /* Insert the opcode formats into a hash table. */ + s390_opformat_hash = hash_new (); + + op_end = s390_opformats + s390_num_opformats; + for (op = s390_opformats; op < op_end; op++) { + retval = hash_insert (s390_opformat_hash, op->name, (PTR) op); + if (retval != (const char *) NULL) + { + as_bad (_("Internal assembler error for instruction format %s"), + op->name); + dup_insn = true; + } + } + + /* Insert the opcodes into a hash table. */ + s390_opcode_hash = hash_new (); + + op_end = s390_opcodes + s390_num_opcodes; + for (op = s390_opcodes; op < op_end; op++) { + retval = hash_insert (s390_opcode_hash, op->name, (PTR) op); + if (retval != (const char *) NULL) + { + as_bad (_("Internal assembler error for instruction %s"), op->name); + dup_insn = true; + } + } + + if (dup_insn) + abort (); + + record_alignment (text_section, 2); + record_alignment (data_section, 2); + record_alignment (bss_section, 2); + +} + +/* Called after all assembly has been done. */ +void +s390_md_end () +{ + if (s390_arch_size == 64) { + bfd_set_arch_mach (stdoutput, bfd_arch_s390, bfd_mach_s390_esame); + } else { + bfd_set_arch_mach (stdoutput, bfd_arch_s390, bfd_mach_s390_esa); + } +} + +void +s390_align_code (fragP, count) + fragS *fragP; + int count; +{ + /* We use nop pattern 0x0707. */ + if (count > 0) { + memset(fragP->fr_literal + fragP->fr_fix, 0x07, count); + fragP->fr_var = count; + } +} + +/* Insert an operand value into an instruction. */ + +static void +s390_insert_operand (insn, operand, val, file, line) + unsigned char *insn; + const struct s390_operand *operand; + offsetT val; + char *file; + unsigned int line; +{ + addressT uval; + int offset; + + if (operand->flags & (S390_OPERAND_SIGNED|S390_OPERAND_PCREL)) { + offsetT min, max; + + max = ((offsetT) 1 << (operand->bits - 1)) - 1; + min = - ((offsetT) 1 << (operand->bits - 1)); + /* Halve PCREL operands. */ + if (operand->flags & S390_OPERAND_PCREL) + val >>= 1; + /* Check for underflow / overflow. */ + if (val < min || val > max) { + const char *err = + "operand out of range (%s not between %ld and %ld)"; + char buf[100]; + + if (operand->flags & S390_OPERAND_PCREL) { + val <<= 1; + min <<= 1; + max <<= 1; + } + sprint_value (buf, val); + if (file == (char *) NULL) + as_bad (err, buf, (int) min, (int) max); + else + as_bad_where (file, line, err, buf, (int) min, (int) max); + return; + } + /* val is ok, now restrict it to operand->bits bits. */ + uval = (addressT) val & ((((addressT) 1 << (operand->bits-1)) << 1) - 1); + } else { + addressT min, max; + + max = (((addressT) 1 << (operand->bits - 1))<<1) - 1; + min = (offsetT) 0; + uval = (addressT) val; + /* Length x in an instructions has real length x+1. */ + if (operand->flags & S390_OPERAND_LENGTH) + uval--; + /* Check for underflow / overflow. */ + if (uval < min || uval > max) { + const char *err = + "operand out of range (%s not between %ld and %ld)"; + char buf[100]; + + if (operand->flags & S390_OPERAND_LENGTH) { + uval++; + min++; + max++; + } + sprint_value (buf, uval); + if (file == (char *) NULL) + as_bad (err, buf, (int) min, (int) max); + else + as_bad_where (file, line, err, buf, (int) min, (int) max); + return; + } + } + + /* Insert fragments of the operand byte for byte. */ + offset = operand->shift + operand->bits; + uval <<= (-offset) & 7; + insn += (offset - 1)/8; + while (uval != 0) { + *insn-- |= uval; + uval >>= 8; + } +} + +/* Structure used to hold suffixes. */ +typedef enum { + ELF_SUFFIX_NONE = 0, + ELF_SUFFIX_GOT, + ELF_SUFFIX_PLT, + ELF_SUFFIX_GOTENT +} elf_suffix_type; + +struct map_bfd { + char *string; + int length; + elf_suffix_type suffix; +}; + +/* Parse @got/@plt/@gotoff. and return the desired relocation. */ +static elf_suffix_type +s390_elf_suffix (str_p, exp_p) + char **str_p; + expressionS *exp_p; +{ + static struct map_bfd mapping[] = { + { "got", 3, ELF_SUFFIX_GOT }, + { "got12", 5, ELF_SUFFIX_GOT }, + { "plt", 3, ELF_SUFFIX_PLT }, + { "gotent", 6, ELF_SUFFIX_GOTENT }, + { NULL, 0, ELF_SUFFIX_NONE } + }; + + struct map_bfd *ptr; + char *str = *str_p; + char *ident; + int len; + + if (*str++ != '@') + return ELF_SUFFIX_NONE; + + ident = str; + while (isalnum(*str)) + str++; + len = str - ident; + + for (ptr = &mapping[0]; ptr->length > 0; ptr++) + if (len == ptr->length && + strncasecmp(ident, ptr->string, ptr->length) == 0) { + if (exp_p->X_add_number != 0) + as_warn (_("identifier+constant@%s means identifier@%s+constant"), + ptr->string, ptr->string); + /* Now check for identifier@suffix+constant. */ + if (*str == '-' || *str == '+') { + char *orig_line = input_line_pointer; + expressionS new_exp; + + input_line_pointer = str; + expression (&new_exp); + + switch (new_exp.X_op) { + case O_constant: /* X_add_number (a constant expression). */ + exp_p->X_add_number += new_exp.X_add_number; + str = input_line_pointer; + break; + case O_symbol: /* X_add_symbol + X_add_number. */ + /* this case is used for e.g. xyz@PLT+.Label. */ + exp_p->X_add_number += new_exp.X_add_number; + exp_p->X_op_symbol = new_exp.X_add_symbol; + exp_p->X_op = O_add; + str = input_line_pointer; + break; + case O_uminus: /* (- X_add_symbol) + X_add_number. */ + /* this case is used for e.g. xyz@PLT-.Label. */ + exp_p->X_add_number += new_exp.X_add_number; + exp_p->X_op_symbol = new_exp.X_add_symbol; + exp_p->X_op = O_subtract; + str = input_line_pointer; + break; + default: + break; + } + + /* If s390_elf_suffix has not been called with + &input_line_pointer as first parameter, we have + clobbered the input_line_pointer. We have to + undo that. */ + if (&input_line_pointer != str_p) + input_line_pointer = orig_line; + } + *str_p = str; + return ptr->suffix; + } + + return BFD_RELOC_UNUSED; +} + +/* Structure used to hold a literal pool entry. */ +struct s390_lpe { + struct s390_lpe *next; + expressionS ex; + FLONUM_TYPE floatnum; /* used if X_op == O_big && X_add_number <= 0 */ + LITTLENUM_TYPE bignum[4]; /* used if X_op == O_big && X_add_number > 0 */ + int nbytes; + bfd_reloc_code_real_type reloc; + symbolS *sym; +}; + +static struct s390_lpe *lpe_free_list = NULL; +static struct s390_lpe *lpe_list = NULL; +static struct s390_lpe *lpe_list_tail = NULL; +static symbolS *lp_sym = NULL; +static int lp_count = 0; +static int lpe_count = 0; + +static int +s390_exp_compare(exp1, exp2) + expressionS *exp1; + expressionS *exp2; +{ + if (exp1->X_op != exp2->X_op) + return 0; + + switch (exp1->X_op) { + case O_constant: /* X_add_number must be equal. */ + case O_register: + return exp1->X_add_number == exp2->X_add_number; + + case O_big: + as_bad(_("Can't handle O_big in s390_exp_compare")); + + case O_symbol: /* X_add_symbol & X_add_number must be equal. */ + case O_symbol_rva: + case O_uminus: + case O_bit_not: + case O_logical_not: + return (exp1->X_add_symbol == exp2->X_add_symbol) && + (exp1->X_add_number == exp2->X_add_number); + + case O_multiply: /* X_add_symbol,X_op_symbol&X_add_number must be equal. */ + case O_divide: + case O_modulus: + case O_left_shift: + case O_right_shift: + case O_bit_inclusive_or: + case O_bit_or_not: + case O_bit_exclusive_or: + case O_bit_and: + case O_add: + case O_subtract: + case O_eq: + case O_ne: + case O_lt: + case O_le: + case O_ge: + case O_gt: + case O_logical_and: + case O_logical_or: + return (exp1->X_add_symbol == exp2->X_add_symbol) && + (exp1->X_op_symbol == exp2->X_op_symbol) && + (exp1->X_add_number == exp2->X_add_number); + default: + return 0; + } +} + +/* Test for @lit and if its present make an entry in the literal pool and + modify the current expression to be an offset into the literal pool. */ +static elf_suffix_type +s390_lit_suffix (str_p, exp_p, suffix) + char **str_p; + expressionS *exp_p; + elf_suffix_type suffix; +{ + bfd_reloc_code_real_type reloc; + char tmp_name[64]; + char *str = *str_p; + char *ident; + struct s390_lpe *lpe; + int nbytes, len; + + if (*str++ != ':') + return suffix; /* No modification. */ + + /* We look for a suffix of the form "@lit1", "@lit2", "@lit4" or "@lit8". */ + ident = str; + while (isalnum(*str)) + str++; + len = str - ident; + if (len != 4 || strncasecmp(ident, "lit", 3) != 0 || + (ident[3]!='1' && ident[3]!='2' && ident[3]!='4' && ident[3]!='8')) + return suffix; /* no modification */ + nbytes = ident[3] - '0'; + + reloc = BFD_RELOC_UNUSED; + if (suffix == ELF_SUFFIX_GOT) { + if (nbytes == 2) + reloc = BFD_RELOC_390_GOT16; + else if (nbytes == 4) + reloc = BFD_RELOC_32_GOT_PCREL; + else if (nbytes == 8) + reloc = BFD_RELOC_390_GOT64; + } else if (suffix == ELF_SUFFIX_PLT) { + if (nbytes == 4) + reloc = BFD_RELOC_390_PLT32; + else if (nbytes == 8) + reloc = BFD_RELOC_390_PLT64; + } + + if (suffix != ELF_SUFFIX_NONE && reloc == BFD_RELOC_UNUSED) { + as_bad (_("Invalid suffix for literal pool entry")); + } + + /* Search the pool if the new entry is a duplicate. */ + if (exp_p->X_op == O_big) { + /* Special processing for big numbers. */ + for (lpe = lpe_list; lpe != NULL; lpe = lpe->next) { + if (lpe->ex.X_op == O_big) { + if (exp_p->X_add_number <= 0 && lpe->ex.X_add_number <= 0) { + if (memcmp(&generic_floating_point_number, &lpe->floatnum, + sizeof(FLONUM_TYPE)) == 0) + break; + } else if (exp_p->X_add_number == lpe->ex.X_add_number) { + if (memcmp(generic_bignum, lpe->bignum, + sizeof(LITTLENUM_TYPE)*exp_p->X_add_number) == 0) + break; + } + } + } + } else { + /* Processing for 'normal' data types. */ + for (lpe = lpe_list; lpe != NULL; lpe = lpe->next) + if (lpe->nbytes == nbytes && lpe->reloc == reloc && + s390_exp_compare(exp_p, &lpe->ex) != 0) + break; + } + if (lpe == NULL) { /* A new literal. */ + if (lpe_free_list != NULL) { + lpe = lpe_free_list; + lpe_free_list = lpe_free_list->next; + } else { + lpe = (struct s390_lpe *) xmalloc(sizeof(struct s390_lpe)); + } + lpe->ex = *exp_p; + if (exp_p->X_op == O_big) { + if (exp_p->X_add_number <= 0) + lpe->floatnum = generic_floating_point_number; + else if (exp_p->X_add_number <= 4) + memcpy(lpe->bignum, generic_bignum, + exp_p->X_add_number*sizeof(LITTLENUM_TYPE)); + else + as_bad(_("Big number is too big")); + } + lpe->nbytes = nbytes; + lpe->reloc = reloc; + /* Literal pool name defined ? */ + if (lp_sym == NULL) { + sprintf(tmp_name, ".L\001%i", lp_count); + lp_sym = symbol_make(tmp_name); + } + /* Make name for literal pool entry. */ + sprintf(tmp_name, ".L\001%i\002%i", lp_count, lpe_count); + lpe_count++; + lpe->sym = symbol_make(tmp_name); + /* Add to literal pool list. */ + lpe->next = NULL; + if (lpe_list_tail != NULL) { + lpe_list_tail->next = lpe; + lpe_list_tail = lpe; + } else + lpe_list = lpe_list_tail = lpe; + } + + /* Now change exp_p to the offset into the literal pool. + Thats the expression: .L^Ax^By-.L^Ax */ + exp_p->X_add_symbol = lpe->sym; + exp_p->X_op_symbol = lp_sym; + exp_p->X_op = O_subtract; + exp_p->X_add_number = 0; + + *str_p = str; + + /* We change the suffix type to ELF_SUFFIX_NONE, because + the difference of two local labels is just a number. */ + return ELF_SUFFIX_NONE; +} + +/* Like normal .long/.short/.word, except support @got, etc. + clobbers input_line_pointer, checks end-of-line. */ +static void +s390_elf_cons (nbytes) + register int nbytes; /* 1=.byte, 2=.word, 4=.long */ +{ + expressionS exp; + elf_suffix_type suffix; + + if (is_it_end_of_statement ()) { + demand_empty_rest_of_line (); + return; + } + + do { + expression (&exp); + if (exp.X_op == O_symbol && *input_line_pointer == '@' && + (suffix=s390_elf_suffix(&input_line_pointer, &exp))!=ELF_SUFFIX_NONE) { + bfd_reloc_code_real_type reloc; + reloc_howto_type *reloc_howto; + int size; + char *where; + + if (nbytes == 2 && suffix == ELF_SUFFIX_GOT) + reloc = BFD_RELOC_390_GOT16; + else if (nbytes == 4 && suffix == ELF_SUFFIX_GOT) + reloc = BFD_RELOC_32_GOT_PCREL; + else if (nbytes == 8 && suffix == ELF_SUFFIX_GOT) + reloc = BFD_RELOC_390_GOT64; + else if (nbytes == 4 && suffix == ELF_SUFFIX_PLT) + reloc = BFD_RELOC_390_PLT32; + else if (nbytes == 8 && suffix == ELF_SUFFIX_PLT) + reloc = BFD_RELOC_390_PLT64; + else + reloc = BFD_RELOC_UNUSED; + + if (reloc != BFD_RELOC_UNUSED) { + reloc_howto = bfd_reloc_type_lookup (stdoutput, reloc); + size = bfd_get_reloc_size (reloc_howto); + if (size > nbytes) + as_bad (_("%s relocations do not fit in %d bytes"), + reloc_howto->name, nbytes); + where = frag_more(nbytes); + md_number_to_chars (where, 0, size); + fix_new_exp (frag_now, where - frag_now->fr_literal, + size, &exp, reloc_howto->pc_relative, reloc); + } else + as_bad (_("relocation not applicable")); + } else + emit_expr (&exp, (unsigned int) nbytes); + } while (*input_line_pointer++ == ','); + + input_line_pointer--; /* Put terminator back into stream. */ + demand_empty_rest_of_line (); +} + +/* We need to keep a list of fixups. We can't simply generate them as + we go, because that would require us to first create the frag, and + that would screw up references to ``.''. */ + +struct s390_fixup +{ + expressionS exp; + int opindex; + bfd_reloc_code_real_type reloc; +}; + +#define MAX_INSN_FIXUPS (4) + +/* This routine is called for each instruction to be assembled. */ + +char * +md_gather_operands (str, insn, opcode) + char *str; + unsigned char *insn; + const struct s390_opcode *opcode; +{ + struct s390_fixup fixups[MAX_INSN_FIXUPS]; + const struct s390_operand *operand; + const unsigned char *opindex_ptr; + elf_suffix_type suffix; + bfd_reloc_code_real_type reloc; + int skip_optional; + int parentheses; + char *f; + int fc, i; + + while (isspace(*str)) str++; + + parentheses = 0; + skip_optional = 0; + + /* Gather the operands. */ + fc = 0; + for (opindex_ptr = opcode->operands; *opindex_ptr != 0; opindex_ptr++) { + expressionS ex; + char *hold; + + operand = s390_operands + *opindex_ptr; + + if (skip_optional && (operand->flags & S390_OPERAND_INDEX)) { + /* We do an early skip. For D(X,B) constructions the index + register is skipped (X is optional). For D(L,B) the base + register will be the skipped operand, because L is NOT + optional. */ + skip_optional = 0; + continue; + } + + /* Gather the operand. */ + hold = input_line_pointer; + input_line_pointer = str; + + if (! register_name (&ex)) /* parse the operand */ + expression (&ex); + + str = input_line_pointer; + input_line_pointer = hold; + + /* Write the operand to the insn. */ + if (ex.X_op == O_illegal) + as_bad (_("illegal operand")); + else if (ex.X_op == O_absent) + as_bad (_("missing operand")); + else if (ex.X_op == O_register || ex.X_op == O_constant) { + s390_lit_suffix (&str, &ex, ELF_SUFFIX_NONE); + if (ex.X_op != O_register && ex.X_op != O_constant) { + /* We need to generate a fixup for the + expression returned by s390_lit_suffix. */ + if (fc >= MAX_INSN_FIXUPS) + as_fatal (_("too many fixups")); + fixups[fc].exp = ex; + fixups[fc].opindex = *opindex_ptr; + fixups[fc].reloc = BFD_RELOC_UNUSED; + ++fc; + } else { + if ((operand->flags & S390_OPERAND_INDEX) && ex.X_add_number == 0) + as_warn("index register specified but zero"); + if ((operand->flags & S390_OPERAND_BASE) && ex.X_add_number == 0) + as_warn("base register specified but zero"); + s390_insert_operand (insn, operand, ex.X_add_number, NULL, 0); + } + } else { + suffix = s390_elf_suffix (&str, &ex); + suffix = s390_lit_suffix (&str, &ex, suffix); + reloc = BFD_RELOC_UNUSED; + if (suffix == ELF_SUFFIX_GOT) { + if (operand->flags & S390_OPERAND_DISP) + reloc = BFD_RELOC_390_GOT12; + else if ((operand->flags & S390_OPERAND_SIGNED) && + (operand->bits == 16)) + reloc = BFD_RELOC_390_GOT16; + else if ((operand->flags & S390_OPERAND_PCREL) && + (operand->bits == 32)) + reloc = BFD_RELOC_390_GOTENT; + } else if (suffix == ELF_SUFFIX_PLT) { + if ((operand->flags & S390_OPERAND_PCREL) && + (operand->bits == 16)) + reloc = BFD_RELOC_390_PLT16DBL; + else if ((operand->flags & S390_OPERAND_PCREL) && + (operand->bits == 32)) + reloc = BFD_RELOC_390_PLT32DBL; + } else if (suffix == ELF_SUFFIX_GOTENT) { + if ((operand->flags & S390_OPERAND_PCREL) && + (operand->bits == 32)) + reloc = BFD_RELOC_390_GOTENT; + } + + if (suffix != ELF_SUFFIX_NONE && reloc == BFD_RELOC_UNUSED) + as_bad (_("invalid operand suffix")); + /* We need to generate a fixup of type 'reloc' for this + expression. */ + if (fc >= MAX_INSN_FIXUPS) + as_fatal (_("too many fixups")); + fixups[fc].exp = ex; + fixups[fc].opindex = *opindex_ptr; + fixups[fc].reloc = reloc; + ++fc; + } + + /* Check the next character. The call to expression has advanced + str past any whitespace. */ + if (operand->flags & S390_OPERAND_DISP) { + /* After a displacement a block in parentheses can start. */ + if (*str != '(') { + /* Check if parethesed block can be skipped. If the next + operand is neiter an optional operand nor a base register + then we have a syntax error. */ + operand = s390_operands + *(++opindex_ptr); + if (!(operand->flags & (S390_OPERAND_INDEX|S390_OPERAND_BASE))) + as_bad (_("syntax error; missing '(' after displacement")); + + /* Ok, skip all operands until S390_OPERAND_BASE. */ + while (!(operand->flags & S390_OPERAND_BASE)) + operand = s390_operands + *(++opindex_ptr); + + /* If there is a next operand it must be seperated by a comma. */ + if (opindex_ptr[1] != '\0') { + if (*str++ != ',') + as_bad(_("syntax error; expected ,")); + } + } else { /* We found an opening parentheses. */ + str++; + for (f = str; *f != '\0'; f++) + if (*f == ',' || *f == ')') + break; + /* If there is no comma until the closing parentheses OR + there is a comma right after the opening parentheses, + we have to skip optional operands. */ + if (*f == ',' && f == str) { /* comma directly after '(' ? */ + skip_optional = 1; + str++; + } else + skip_optional = (*f != ','); + } + } else if (operand->flags & S390_OPERAND_BASE) { + /* After the base register the parenthesed block ends. */ + if (*str++ != ')') + as_bad(_("syntax error; missing ')' after base register")); + skip_optional = 0; + /* If there is a next operand it must be seperated by a comma. */ + if (opindex_ptr[1] != '\0') { + if (*str++ != ',') + as_bad(_("syntax error; expected ,")); + } + } else { + /* We can find an 'early' closing parentheses in e.g. D(L) instead + of D(L,B). In this case the base register has to be skipped. */ + if (*str == ')') { + operand = s390_operands + *(++opindex_ptr); + if (!(operand->flags & S390_OPERAND_BASE)) + as_bad (_("syntax error; ')' not allowed here")); + str++; + } + /* If there is a next operand it must be seperated by a comma. */ + if (opindex_ptr[1] != '\0') { + if (*str++ != ',') + as_bad(_("syntax error; expected ,")); + } + } + } + + while (isspace (*str)) + ++str; + + if (*str != '\0') { + char *linefeed; + + if ((linefeed = strchr(str, '\n')) != NULL) + *linefeed = '\0'; + as_bad (_("junk at end of line: `%s'"), str); + if (linefeed != NULL) + *linefeed = '\n'; + } + + /* Write out the instruction. */ + f = frag_more (opcode->oplen); + memcpy(f, insn, opcode->oplen); + + /* Create any fixups. At this point we do not use a + bfd_reloc_code_real_type, but instead just use the + BFD_RELOC_UNUSED plus the operand index. This lets us easily + handle fixups for any operand type, although that is admittedly + not a very exciting feature. We pick a BFD reloc type in + md_apply_fix3. */ + for (i = 0; i < fc; i++) { + operand = s390_operands + fixups[i].opindex; + + if (fixups[i].reloc != BFD_RELOC_UNUSED) { + reloc_howto_type *reloc_howto; + fixS *fixP; + int size; + + reloc_howto = bfd_reloc_type_lookup (stdoutput, fixups[i].reloc); + if (!reloc_howto) + abort (); + + size = bfd_get_reloc_size (reloc_howto); + + if (size < 1 || size > 4) + abort(); + + fixP = fix_new_exp (frag_now, + f - frag_now->fr_literal + (operand->shift/8), + size, &fixups[i].exp, reloc_howto->pc_relative, + fixups[i].reloc); + /* Turn off overflow checking in fixup_segment. This is necessary + because fixup_segment will signal an overflow for large 4 byte + quantities for GOT12 relocations. */ + if (fixups[i].reloc == BFD_RELOC_390_GOT12 || + fixups[i].reloc == BFD_RELOC_390_GOT16) + fixP->fx_no_overflow = 1; + } else + fix_new_exp (frag_now, f - frag_now->fr_literal, 4, &fixups[i].exp, + (operand->flags & S390_OPERAND_PCREL) != 0, + ((bfd_reloc_code_real_type) + (fixups[i].opindex + (int) BFD_RELOC_UNUSED))); + } + return str; +} + +/* This routine is called for each instruction to be assembled. */ + +void +md_assemble (str) + char *str; +{ + const struct s390_opcode *opcode; + unsigned char insn[6]; + char *s; + + /* Get the opcode. */ + for (s = str; *s != '\0' && ! isspace (*s); s++) + ; + if (*s != '\0') + *s++ = '\0'; + + /* Look up the opcode in the hash table. */ + opcode = (struct s390_opcode *) hash_find (s390_opcode_hash, str); + if (opcode == (const struct s390_opcode *) NULL) { + as_bad (_("Unrecognized opcode: `%s'"), str); + return; + } else if (!(opcode->architecture & current_arch_mask)) { + as_bad("Opcode %s not available in this architecture", str); + return; + } + + memcpy(insn, opcode->opcode, sizeof(insn)); + md_gather_operands(s, insn, opcode); +} + +#ifndef WORKING_DOT_WORD +/* Handle long and short jumps. We don't support these */ +void +md_create_short_jump (ptr, from_addr, to_addr, frag, to_symbol) + char *ptr; + addressT from_addr, to_addr; + fragS *frag; + symbolS *to_symbol; +{ + abort (); +} + +void +md_create_long_jump (ptr, from_addr, to_addr, frag, to_symbol) + char *ptr; + addressT from_addr, to_addr; + fragS *frag; + symbolS *to_symbol; +{ + abort (); +} +#endif + +void +s390_bss (ignore) + int ignore ATTRIBUTE_UNUSED; +{ + /* We don't support putting frags in the BSS segment, we fake it + by marking in_bss, then looking at s_skip for clues. */ + + subseg_set (bss_section, 0); + demand_empty_rest_of_line (); +} + +/* Pseudo-op handling. */ + +void +s390_insn(ignore) + int ignore ATTRIBUTE_UNUSED; +{ + expressionS exp; + const struct s390_opcode *opformat; + unsigned char insn[6]; + char *s; + + /* Get the opcode format. */ + s = input_line_pointer; + while (*s != '\0' && *s != ',' && ! isspace (*s)) + s++; + if (*s != ',') + as_bad (_("Invalid .insn format\n")); + *s++ = '\0'; + + /* Look up the opcode in the hash table. */ + opformat = (struct s390_opcode *) + hash_find (s390_opformat_hash, input_line_pointer); + if (opformat == (const struct s390_opcode *) NULL) { + as_bad (_("Unrecognized opcode format: `%s'"), input_line_pointer); + return; + } + input_line_pointer = s; + expression (&exp); + if (exp.X_op == O_constant) { + if (opformat->oplen == 4 || + (opformat->oplen == 2 && exp.X_op < 0x10000)) + md_number_to_chars (insn, exp.X_add_number, opformat->oplen); + else + as_bad(_("Invalid .insn format\n")); + } else if (exp.X_op == O_big) { + if (exp.X_add_number > 0 && + opformat->oplen == 6 && + generic_bignum[3] == 0) { + md_number_to_chars (insn, generic_bignum[2], 2); + md_number_to_chars (&insn[2], generic_bignum[1], 2); + md_number_to_chars (&insn[4], generic_bignum[0], 2); + } else + as_bad(_("Invalid .insn format\n")); + } else + as_bad (_("second operand of .insn not a constant\n")); + if (*input_line_pointer++ != ',') + as_bad (_("missing comma after insn constant\n")); + + if ((s = strchr(input_line_pointer, '\n')) != NULL) + *s = '\0'; + input_line_pointer = md_gather_operands (input_line_pointer, insn, opformat); + if (s != NULL) + *s = '\n'; + demand_empty_rest_of_line (); +} + +/* The .byte pseudo-op. This is similar to the normal .byte + pseudo-op, but it can also take a single ASCII string. */ + +static void +s390_byte (ignore) + int ignore ATTRIBUTE_UNUSED; +{ + if (*input_line_pointer != '\"') + { + cons (1); + return; + } + + /* Gather characters. A real double quote is doubled. Unusual + characters are not permitted. */ + ++input_line_pointer; + while (1) + { + char c; + + c = *input_line_pointer++; + + if (c == '\"') + { + if (*input_line_pointer != '\"') + break; + ++input_line_pointer; + } + + FRAG_APPEND_1_CHAR (c); + } + + demand_empty_rest_of_line (); +} + +/* The .ltorg pseudo-op.This emits all literals defined since the last + .ltorg or the invocation of gas. Literals are defined with the + @lit suffix. */ + +static void +s390_literals (ignore) + int ignore ATTRIBUTE_UNUSED; +{ + struct s390_lpe *lpe; + + if (lp_sym == NULL || lpe_count == 0) + return; /* nothing to be done */ + + /* Emit symbol for start of literal pool. */ + S_SET_SEGMENT (lp_sym, now_seg); + S_SET_VALUE (lp_sym, (valueT) frag_now_fix ()); + lp_sym->sy_frag = frag_now; + + while (lpe_list) { + lpe = lpe_list; + lpe_list = lpe_list->next; + S_SET_SEGMENT (lpe->sym, now_seg); + S_SET_VALUE (lpe->sym, (valueT) frag_now_fix ()); + lpe->sym->sy_frag = frag_now; + + /* Emit literal pool entry. */ + if (lpe->reloc != BFD_RELOC_UNUSED) { + reloc_howto_type *reloc_howto = + bfd_reloc_type_lookup (stdoutput, lpe->reloc); + int size = bfd_get_reloc_size (reloc_howto); + char *where; + + if (size > lpe->nbytes) + as_bad (_("%s relocations do not fit in %d bytes"), + reloc_howto->name, lpe->nbytes); + where = frag_more(lpe->nbytes); + md_number_to_chars (where, 0, size); + fix_new_exp (frag_now, where - frag_now->fr_literal, + size, &lpe->ex, reloc_howto->pc_relative, lpe->reloc); + } else { + if (lpe->ex.X_op == O_big) { + if (lpe->ex.X_add_number <= 0) + generic_floating_point_number = lpe->floatnum; + else + memcpy(generic_bignum, lpe->bignum, + lpe->ex.X_add_number*sizeof(LITTLENUM_TYPE)); + } + emit_expr (&lpe->ex, lpe->nbytes); + } + + lpe->next = lpe_free_list; + lpe_free_list = lpe; + } + lpe_list_tail = NULL; + lp_sym = NULL; + lp_count++; + lpe_count = 0; +} + +/* Turn a string in input_line_pointer into a floating point constant + of type type, and store the appropriate bytes in *litp. The number + of LITTLENUMS emitted is stored in *sizep . An error message is + returned, or NULL on OK. */ + +char * +md_atof (type, litp, sizep) + int type; + char *litp; + int *sizep; +{ + int prec; + LITTLENUM_TYPE words[4]; + char *t; + int i; + + switch (type) + { + case 'f': + prec = 2; + break; + + case 'd': + prec = 4; + break; + + default: + *sizep = 0; + return "bad call to md_atof"; + } + + t = atof_ieee (input_line_pointer, type, words); + if (t) + input_line_pointer = t; + + *sizep = prec * 2; + + for (i = 0; i < prec; i++) + { + md_number_to_chars (litp, (valueT) words[i], 2); + litp += 2; + } + + return NULL; +} + +/* Align a section (I don't know why this is machine dependent). */ + +valueT +md_section_align (seg, addr) + asection *seg; + valueT addr; +{ + int align = bfd_get_section_alignment (stdoutput, seg); + + return ((addr + (1 << align) - 1) & (-1 << align)); +} + +/* We don't have any form of relaxing. */ + +int +md_estimate_size_before_relax (fragp, seg) + fragS *fragp ATTRIBUTE_UNUSED; + asection *seg ATTRIBUTE_UNUSED; +{ + abort (); + return 0; +} + +/* Convert a machine dependent frag. We never generate these. */ + +void +md_convert_frag (abfd, sec, fragp) + bfd *abfd ATTRIBUTE_UNUSED; + asection *sec ATTRIBUTE_UNUSED; + fragS *fragp ATTRIBUTE_UNUSED; +{ + abort (); +} + +symbolS * +md_undefined_symbol (name) + char *name; +{ + if (*name == '_' && *(name+1) == 'G' + && strcmp(name, "_GLOBAL_OFFSET_TABLE_") == 0) + { + if(!GOT_symbol) + { + if(symbol_find(name)) + as_bad(_("GOT already in symbol table")); + GOT_symbol = symbol_new (name, undefined_section, + (valueT) 0, &zero_address_frag); + } + return GOT_symbol; + } + return 0; +} + +/* Functions concerning relocs. */ + +/* The location from which a PC relative jump should be calculated, + given a PC relative reloc. */ + +long +md_pcrel_from_section (fixp, sec) + fixS *fixp; + segT sec ATTRIBUTE_UNUSED; +{ + return fixp->fx_frag->fr_address + fixp->fx_where; +} + +/* Here we decide which fixups can be adjusted to make them relative to + the beginning of the section instead of the symbol. Basically we need + to make sure that the dynamic relocations are done correctly, so in + some cases we force the original symbol to be used. */ +int +tc_s390_fix_adjustable(fixP) + fixS * fixP; +{ + /* Prevent all adjustments to global symbols. */ + if (S_IS_EXTERN (fixP->fx_addsy)) + return 0; + if (S_IS_WEAK (fixP->fx_addsy)) + return 0; + /* adjust_reloc_syms doesn't know about the GOT. */ + if (fixP->fx_r_type == BFD_RELOC_32_GOTOFF + || fixP->fx_r_type == BFD_RELOC_390_PLT16DBL + || fixP->fx_r_type == BFD_RELOC_390_PLT32 + || fixP->fx_r_type == BFD_RELOC_390_PLT32DBL + || fixP->fx_r_type == BFD_RELOC_390_PLT64 + || fixP->fx_r_type == BFD_RELOC_390_GOT12 + || fixP->fx_r_type == BFD_RELOC_390_GOT16 + || fixP->fx_r_type == BFD_RELOC_32_GOT_PCREL + || fixP->fx_r_type == BFD_RELOC_390_GOT64 + || fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT + || fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY) + return 0; + return 1; +} + +/* Apply a fixup to the object code. This is called for all the + fixups we generated by the call to fix_new_exp, above. In the call + above we used a reloc code which was the largest legal reloc code + plus the operand index. Here we undo that to recover the operand + index. At this point all symbol values should be fully resolved, + and we attempt to completely resolve the reloc. If we can not do + that, we determine the correct reloc code and put it back in the + fixup. */ + +int +md_apply_fix3 (fixp, valuep, seg) + fixS *fixp; + valueT *valuep; + segT seg ATTRIBUTE_UNUSED; +{ + char *where; + valueT value; + + value = *valuep; + where = fixp->fx_frag->fr_literal + fixp->fx_where; + + if (fixp->fx_subsy != NULL) { + if (!S_IS_DEFINED (fixp->fx_subsy)) + as_bad_where (fixp->fx_file, fixp->fx_line, + _("unresolved fx_subsy symbol that must be resolved")); + value -= S_GET_VALUE(fixp->fx_subsy); + } + + if (fixp->fx_addsy != NULL) { + /* `*valuep' may contain the value of the symbol on which the reloc + will be based; we have to remove it. */ + if (fixp->fx_addsy->sy_used_in_reloc + && S_GET_SEGMENT (fixp->fx_addsy) != absolute_section + && S_GET_SEGMENT (fixp->fx_addsy) != undefined_section + && ! bfd_is_com_section (S_GET_SEGMENT (fixp->fx_addsy))) + value -= S_GET_VALUE (fixp->fx_addsy); + + if (fixp->fx_pcrel) + value += fixp->fx_frag->fr_address + fixp->fx_where; + } else { + fixp->fx_done = 1; + } + + if ((int) fixp->fx_r_type >= (int) BFD_RELOC_UNUSED) { + const struct s390_operand *operand; + int opindex; + + opindex = (int) fixp->fx_r_type - (int) BFD_RELOC_UNUSED; + operand = &s390_operands[opindex]; + + if (fixp->fx_done) { + /* Insert the fully resolved operand value. */ + s390_insert_operand (where, operand, (offsetT) value, + fixp->fx_file, fixp->fx_line); + return 1; + } + + /* Determine a BFD reloc value based on the operand information. + We are only prepared to turn a few of the operands into + relocs. */ + fixp->fx_offset = value; + if (operand->bits == 12 && operand->shift == 20) { + fixp->fx_size = 2; + fixp->fx_where += 2; + fixp->fx_r_type = BFD_RELOC_390_12; + } else if (operand->bits == 12 && operand->shift == 36) { + fixp->fx_size = 2; + fixp->fx_where += 4; + fixp->fx_r_type = BFD_RELOC_390_12; + } else if (operand->bits == 8 && operand->shift == 8) { + fixp->fx_size = 1; + fixp->fx_where += 1; + fixp->fx_r_type = BFD_RELOC_8; + } else if (operand->bits == 16 && operand->shift == 16) { + fixp->fx_size = 2; + fixp->fx_where += 2; + if (operand->flags & S390_OPERAND_PCREL) { + fixp->fx_r_type = BFD_RELOC_390_PC16DBL; + fixp->fx_offset += 2; + } else + fixp->fx_r_type = BFD_RELOC_16; + } else if (operand->bits == 32 && operand->shift == 16 && + (operand->flags & S390_OPERAND_PCREL)) { + fixp->fx_size = 4; + fixp->fx_where += 2; + fixp->fx_offset += 2; + fixp->fx_r_type = BFD_RELOC_390_PC32DBL; + } else { + char *sfile; + unsigned int sline; + + /* Use expr_symbol_where to see if this is an expression + symbol. */ + if (expr_symbol_where (fixp->fx_addsy, &sfile, &sline)) + as_bad_where (fixp->fx_file, fixp->fx_line, + _("unresolved expression that must be resolved")); + else + as_bad_where (fixp->fx_file, fixp->fx_line, + _("unsupported relocation type")); + fixp->fx_done = 1; + return 1; + } + } else { + switch (fixp->fx_r_type) { + case BFD_RELOC_8: + if (fixp->fx_pcrel) + abort (); + if (fixp->fx_done) + md_number_to_chars (where, value, 1); + break; + case BFD_RELOC_390_12: + case BFD_RELOC_390_GOT12: + if (fixp->fx_done) { + unsigned short mop; + mop = bfd_getb16 ((unsigned char *) where); + mop |= (unsigned short) (value & 0xfff); + bfd_putb16 ((bfd_vma) mop, (unsigned char *) where); + } + break; + + case BFD_RELOC_16: + case BFD_RELOC_GPREL16: + case BFD_RELOC_16_GOT_PCREL: + case BFD_RELOC_16_GOTOFF: + if (fixp->fx_pcrel) + as_bad_where (fixp->fx_file, fixp->fx_line, + "cannot emit PC relative %s relocation%s%s", + bfd_get_reloc_code_name (fixp->fx_r_type), + fixp->fx_addsy != NULL ? " against " : "", + (fixp->fx_addsy != NULL + ? S_GET_NAME (fixp->fx_addsy) + : "")); + if (fixp->fx_done) + md_number_to_chars (where, value, 2); + break; + case BFD_RELOC_390_GOT16: + if (fixp->fx_done) + md_number_to_chars (where, value, 2); + break; + case BFD_RELOC_390_PC16DBL: + case BFD_RELOC_390_PLT16DBL: + value += 2; + if (fixp->fx_done) + md_number_to_chars (where, (offsetT) value >> 1, 2); + break; + + case BFD_RELOC_32: + if (fixp->fx_pcrel) + fixp->fx_r_type = BFD_RELOC_32_PCREL; + else + fixp->fx_r_type = BFD_RELOC_32; + if (fixp->fx_done) + md_number_to_chars (where, value, 4); + break; + case BFD_RELOC_32_PCREL: + case BFD_RELOC_32_BASEREL: + fixp->fx_r_type = BFD_RELOC_32_PCREL; + if (fixp->fx_done) + md_number_to_chars (where, value, 4); + break; + case BFD_RELOC_32_GOT_PCREL: + case BFD_RELOC_390_PLT32: + if (fixp->fx_done) + md_number_to_chars (where, value, 4); + break; + case BFD_RELOC_390_PC32DBL: + case BFD_RELOC_390_PLT32DBL: + case BFD_RELOC_390_GOTPCDBL: + case BFD_RELOC_390_GOTENT: + value += 2; + if (fixp->fx_done) + md_number_to_chars (where, (offsetT) value >> 1, 4); + break; + + case BFD_RELOC_32_GOTOFF: + if (fixp->fx_done) + md_number_to_chars (where, value, sizeof(int)); + break; + + case BFD_RELOC_390_GOT64: + case BFD_RELOC_390_PLT64: + if (fixp->fx_done) + md_number_to_chars (where, value, 8); + break; + + case BFD_RELOC_64: + if (fixp->fx_pcrel) + fixp->fx_r_type = BFD_RELOC_64_PCREL; + else + fixp->fx_r_type = BFD_RELOC_64; + if (fixp->fx_done) + md_number_to_chars (where, value, 8); + break; + + case BFD_RELOC_64_PCREL: + fixp->fx_r_type = BFD_RELOC_64_PCREL; + if (fixp->fx_done) + md_number_to_chars (where, value, 8); + break; + + case BFD_RELOC_VTABLE_INHERIT: + case BFD_RELOC_VTABLE_ENTRY: + fixp->fx_done = 0; + return 1; + + default: { + const char *reloc_name = bfd_get_reloc_code_name(fixp->fx_r_type); + if (reloc_name != NULL) + fprintf(stderr, "Gas failure, reloc type %s\n", reloc_name); + else + fprintf(stderr, "Gas failure, reloc type #%i\n", fixp->fx_r_type); + fflush(stderr); + abort (); + } + } + + fixp->fx_offset = value; + } + + return 1; +} + +/* Generate a reloc for a fixup. */ + +arelent * +tc_gen_reloc (seg, fixp) + asection *seg ATTRIBUTE_UNUSED; + fixS *fixp; +{ + bfd_reloc_code_real_type code; + arelent *reloc; + + code = fixp->fx_r_type; + if (GOT_symbol && fixp->fx_addsy == GOT_symbol) { + if ((s390_arch_size == 32 && code == BFD_RELOC_32_PCREL) || + (s390_arch_size == 64 && code == BFD_RELOC_64_PCREL)) + code = BFD_RELOC_390_GOTPC; + if (code == BFD_RELOC_390_PC32DBL) + code = BFD_RELOC_390_GOTPCDBL; + } + + reloc = (arelent *) xmalloc (sizeof (arelent)); + reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *)); + *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy); + reloc->address = fixp->fx_frag->fr_address + fixp->fx_where; + reloc->howto = bfd_reloc_type_lookup (stdoutput, code); + if (reloc->howto == NULL) + { + as_bad_where (fixp->fx_file, fixp->fx_line, + _("cannot represent relocation type %s"), + bfd_get_reloc_code_name (code)); + /* Set howto to a garbage value so that we can keep going. */ + reloc->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32); + assert (reloc->howto != NULL); + } + reloc->addend = fixp->fx_offset; + + return reloc; +} + diff --git a/gas/config/tc-s390.h b/gas/config/tc-s390.h new file mode 100644 index 0000000..954fa18 --- /dev/null +++ b/gas/config/tc-s390.h @@ -0,0 +1,113 @@ +/* tc-s390.h -- Header file for tc-s390.c. + Copyright (C) 2000 Free Software Foundation, Inc. + Written by Martin Schwidefsky (schwidefsky@de.ibm.com). + + This file is part of GAS, the GNU Assembler. + + GAS is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GAS is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GAS; see the file COPYING. If not, write to the Free + Software Foundation, 59 Temple Place - Suite 330, Boston, MA + 02111-1307, USA. */ + +#define TC_S390 + +#ifdef ANSI_PROTOTYPES +struct fix; +#endif + +#ifndef BFD_ASSEMBLER + #error S390 support requires BFD_ASSEMBLER +#endif + +/* This expression evaluates to false if the relocation is for a local object + for which we still want to do the relocation at runtime. True if we + are willing to perform this relocation while building the .o file. + This is only used for pcrel relocations, so GOTOFF does not need to be + checked here. I am not sure if some of the others are ever used with + pcrel, but it is easier to be safe than sorry. */ + +#define TC_RELOC_RTSYM_LOC_FIXUP(FIX) \ + ((FIX)->fx_addsy == NULL \ + || (! S_IS_EXTERNAL ((FIX)->fx_addsy) \ + && ! S_IS_WEAK ((FIX)->fx_addsy) \ + && S_IS_DEFINED ((FIX)->fx_addsy) \ + && ! S_IS_COMMON ((FIX)->fx_addsy))) + +#define tc_fix_adjustable(X) tc_s390_fix_adjustable(X) +extern int tc_s390_fix_adjustable PARAMS ((struct fix *)); + +/* The target BFD architecture. */ +#define TARGET_ARCH bfd_arch_s390 +extern enum bfd_architecture s390_arch PARAMS ((void)); + +/* The target BFD format. */ +#define TARGET_FORMAT s390_target_format() + +/* Set the endianness we are using. */ +#define TARGET_BYTES_BIG_ENDIAN 1 + +/* Whether or not the target is big endian */ +extern int target_big_endian; + +/* Permit temporary numeric labels. */ +#define LOCAL_LABELS_FB 1 + +/* $ is used to refer to the current location. */ +/* #define DOLLAR_DOT */ + +/* We need to be able to make relocations involving the difference of + two symbols. This includes the difference of two symbols when + one of them is undefined (this comes up in PIC code generation). + */ +#define UNDEFINED_DIFFERENCE_OK + +/* foo-. gets turned into PC relative relocs */ +#define DIFF_EXPR_OK + +/* We don't need to handle .word strangely. */ +#define WORKING_DOT_WORD + +/* We set the fx_done field appropriately in md_apply_fix. */ +#define TC_HANDLES_FX_DONE + +#define md_number_to_chars number_to_chars_bigendian + +#define md_do_align(n, fill, len, max, around) \ +if ((n) && !need_pass_2 && (fill == 0) && \ + (bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE) != 0) { \ + char *p; \ + p = frag_var (rs_align_code, 15, 1, (relax_substateT) max, \ + (symbolS *) 0, (offsetT) (n), (char *) 0); \ + *p = 0x07; \ + goto around; \ +} + +extern void s390_align_code PARAMS ((fragS *, int)); + +#define HANDLE_ALIGN(fragP) \ +if (fragP->fr_type == rs_align_code) \ + s390_align_code (fragP, (fragP->fr_next->fr_address \ + - fragP->fr_address \ + - fragP->fr_fix)); + +/* call md_apply_fix3 with segment instead of md_apply_fix */ +#define MD_APPLY_FIX3 + +/* call md_pcrel_from_section, not md_pcrel_from */ +#define MD_PCREL_FROM_SECTION(FIXP, SEC) md_pcrel_from_section(FIXP, SEC) +extern long md_pcrel_from_section PARAMS ((struct fix *, segT)); + +#define md_operand(x) + +extern void s390_md_end PARAMS ((void)); +#define md_end() s390_md_end () diff --git a/gas/configure b/gas/configure index a0f4dfe..ad4fdf8 100755 --- a/gas/configure +++ b/gas/configure @@ -2279,6 +2279,8 @@ for this_target in $target $canon_targets ; do powerpcle*) cpu_type=ppc endian=little ;; powerpc*) cpu_type=ppc endian=big ;; rs6000*) cpu_type=ppc ;; + s390x*) cpu_type=s390 arch=s390x ;; + s390*) cpu_type=s390 arch=s390 ;; sparclite*) cpu_type=sparc arch=sparclite ;; sparclet*) cpu_type=sparc arch=sparclet ;; sparc64*) cpu_type=sparc arch=v9-64 ;; @@ -2524,6 +2526,9 @@ EOF ppc-*-netware*) fmt=elf em=ppcnw ;; ppc-*-vxworks*) fmt=elf ;; + s390x-*-linux-gnu*) fmt=elf em=linux ;; + s390-*-linux-gnu*) fmt=elf em=linux ;; + sh-*-linux*) fmt=elf em=linux ;; sh-*-elf*) fmt=elf ;; sh-*-coff*) fmt=coff ;; @@ -2672,6 +2677,15 @@ EOF esac ;; + s390) + if test $this_target = $target ; then + cat >> confdefs.h <&6 -echo "configure:3084: checking for $ac_word" >&5 +echo "configure:3098: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3110,7 +3124,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3114: checking for $ac_word" >&5 +echo "configure:3128: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3161,7 +3175,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3165: checking for $ac_word" >&5 +echo "configure:3179: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3193,7 +3207,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:3197: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:3211: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -3204,12 +3218,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 3208 "configure" +#line 3222 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:3213: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3227: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -3235,12 +3249,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:3239: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:3253: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:3244: checking whether we are using GNU C" >&5 +echo "configure:3258: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3249,7 +3263,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:3253: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:3267: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -3268,7 +3282,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:3272: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:3286: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3305,7 +3319,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3309: checking for $ac_word" >&5 +echo "configure:3323: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3336,7 +3350,7 @@ done test -n "$YACC" || YACC="yacc" echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:3340: checking how to run the C preprocessor" >&5 +echo "configure:3354: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -3351,13 +3365,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3361: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3375: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -3368,13 +3382,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3378: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3392: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -3385,13 +3399,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3395: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3409: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -3421,7 +3435,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3425: checking for $ac_word" >&5 +echo "configure:3439: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3454,7 +3468,7 @@ test -n "$LEX" || LEX=""$missing_dir/missing flex"" # Extract the first word of "flex", so it can be a program name with args. set dummy flex; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3458: checking for $ac_word" >&5 +echo "configure:3472: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3488,7 +3502,7 @@ then *) ac_lib=l ;; esac echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6 -echo "configure:3492: checking for yywrap in -l$ac_lib" >&5 +echo "configure:3506: checking for yywrap in -l$ac_lib" >&5 ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3496,7 +3510,7 @@ else ac_save_LIBS="$LIBS" LIBS="-l$ac_lib $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3525: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3530,7 +3544,7 @@ fi fi echo $ac_n "checking lex output file root""... $ac_c" 1>&6 -echo "configure:3534: checking lex output file root" >&5 +echo "configure:3548: checking lex output file root" >&5 if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3551,7 +3565,7 @@ echo "$ac_t""$ac_cv_prog_lex_root" 1>&6 LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6 -echo "configure:3555: checking whether yytext is a pointer" >&5 +echo "configure:3569: checking whether yytext is a pointer" >&5 if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3563,14 +3577,14 @@ echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c ac_save_LIBS="$LIBS" LIBS="$LIBS $LEXLIB" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3588: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_prog_lex_yytext_pointer=yes else @@ -3596,7 +3610,7 @@ ALL_LINGUAS= # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3600: checking for $ac_word" >&5 +echo "configure:3614: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3624,12 +3638,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:3628: checking for ANSI C header files" >&5 +echo "configure:3642: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -3637,7 +3651,7 @@ else #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3641: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3655: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3654,7 +3668,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -3672,7 +3686,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -3693,7 +3707,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -3704,7 +3718,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:3708: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3722: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -3728,12 +3742,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:3732: checking for working const" >&5 +echo "configure:3746: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3800: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -3803,21 +3817,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:3807: checking for inline" >&5 +echo "configure:3821: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3835: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -3843,12 +3857,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:3847: checking for off_t" >&5 +echo "configure:3861: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -3876,12 +3890,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:3880: checking for size_t" >&5 +echo "configure:3894: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -3911,19 +3925,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:3915: checking for working alloca.h" >&5 +echo "configure:3929: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:3927: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3941: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -3944,12 +3958,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:3948: checking for alloca" >&5 +echo "configure:3962: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3995: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -4009,12 +4023,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:4013: checking whether alloca needs Cray hooks" >&5 +echo "configure:4027: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4043: checking for $ac_func" >&5 +echo "configure:4057: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4085: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4094,7 +4108,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:4098: checking stack direction for C alloca" >&5 +echo "configure:4112: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4102,7 +4116,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:4139: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -4146,17 +4160,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:4150: checking for $ac_hdr" >&5 +echo "configure:4164: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4160: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4174: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4185,12 +4199,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4189: checking for $ac_func" >&5 +echo "configure:4203: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4231: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4238,7 +4252,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:4242: checking for working mmap" >&5 +echo "configure:4256: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4246,7 +4260,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:4404: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -4414,17 +4428,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:4418: checking for $ac_hdr" >&5 +echo "configure:4432: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4428: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4442: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4454,12 +4468,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4458: checking for $ac_func" >&5 +echo "configure:4472: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4500: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4511,12 +4525,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4515: checking for $ac_func" >&5 +echo "configure:4529: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4573,19 +4587,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:4577: checking for LC_MESSAGES" >&5 +echo "configure:4591: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:4589: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4603: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -4606,7 +4620,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:4610: checking whether NLS is requested" >&5 +echo "configure:4624: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -4626,7 +4640,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:4630: checking whether included gettext is requested" >&5 +echo "configure:4644: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -4645,17 +4659,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:4649: checking for libintl.h" >&5 +echo "configure:4663: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4659: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4673: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4672,19 +4686,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:4676: checking for gettext in libc" >&5 +echo "configure:4690: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:4688: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4702: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -4700,7 +4714,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:4704: checking for bindtextdomain in -lintl" >&5 +echo "configure:4718: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -4708,7 +4722,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4737: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -4735,19 +4749,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:4739: checking for gettext in libintl" >&5 +echo "configure:4753: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4765: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -4775,7 +4789,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4779: checking for $ac_word" >&5 +echo "configure:4793: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4809,12 +4823,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4813: checking for $ac_func" >&5 +echo "configure:4827: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4855: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4864,7 +4878,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4868: checking for $ac_word" >&5 +echo "configure:4882: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4900,7 +4914,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4904: checking for $ac_word" >&5 +echo "configure:4918: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4932,7 +4946,7 @@ else fi cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4958: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -4972,7 +4986,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4976: checking for $ac_word" >&5 +echo "configure:4990: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5006,7 +5020,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5010: checking for $ac_word" >&5 +echo "configure:5024: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5042,7 +5056,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5046: checking for $ac_word" >&5 +echo "configure:5060: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5132,7 +5146,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:5136: checking for catalogs to be installed" >&5 +echo "configure:5150: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -5160,17 +5174,17 @@ echo "configure:5136: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:5164: checking for linux/version.h" >&5 +echo "configure:5178: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:5174: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:5188: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -5233,7 +5247,7 @@ fi echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:5237: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:5251: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -5258,7 +5272,7 @@ fi echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:5262: checking for executable suffix" >&5 +echo "configure:5276: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5268,7 +5282,7 @@ else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:5272: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:5286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in *.c | *.o | *.obj | *.ilk | *.pdb) ;; @@ -5293,17 +5307,17 @@ for ac_hdr in string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h e do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:5297: checking for $ac_hdr" >&5 +echo "configure:5311: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:5307: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:5321: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -5333,7 +5347,7 @@ done # Put this here so that autoconf's "cross-compiling" message doesn't confuse # people who are not cross-compiling but are compiling cross-assemblers. echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6 -echo "configure:5337: checking whether compiling a cross-assembler" >&5 +echo "configure:5351: checking whether compiling a cross-assembler" >&5 if test "${host}" = "${target}"; then cross_gas=no else @@ -5348,19 +5362,19 @@ echo "$ac_t""$cross_gas" 1>&6 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:5352: checking for working alloca.h" >&5 +echo "configure:5366: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:5364: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5378: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -5381,12 +5395,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:5385: checking for alloca" >&5 +echo "configure:5399: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5432: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -5446,12 +5460,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:5450: checking whether alloca needs Cray hooks" >&5 +echo "configure:5464: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:5480: checking for $ac_func" >&5 +echo "configure:5494: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5522: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -5531,7 +5545,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:5535: checking stack direction for C alloca" >&5 +echo "configure:5549: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5539,7 +5553,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:5576: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -5580,21 +5594,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:5584: checking for inline" >&5 +echo "configure:5598: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5612: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -5624,12 +5638,12 @@ esac for ac_func in unlink remove do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:5628: checking for $ac_func" >&5 +echo "configure:5642: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5670: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -5681,12 +5695,12 @@ done for ac_func in sbrk do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:5685: checking for $ac_func" >&5 +echo "configure:5699: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5727: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -5744,7 +5758,7 @@ case "$host" in ;; *-ncr-sysv4.3*) echo $ac_n "checking for _mwvalidcheckl in -lmw""... $ac_c" 1>&6 -echo "configure:5748: checking for _mwvalidcheckl in -lmw" >&5 +echo "configure:5762: checking for _mwvalidcheckl in -lmw" >&5 ac_lib_var=`echo mw'_'_mwvalidcheckl | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -5752,7 +5766,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lmw $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5781: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -5784,7 +5798,7 @@ else fi echo $ac_n "checking for main in -lm""... $ac_c" 1>&6 -echo "configure:5788: checking for main in -lm" >&5 +echo "configure:5802: checking for main in -lm" >&5 ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -5792,14 +5806,14 @@ else ac_save_LIBS="$LIBS" LIBS="-lm $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5817: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -5822,7 +5836,7 @@ fi ;; *) echo $ac_n "checking for main in -lm""... $ac_c" 1>&6 -echo "configure:5826: checking for main in -lm" >&5 +echo "configure:5840: checking for main in -lm" >&5 ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -5830,14 +5844,14 @@ else ac_save_LIBS="$LIBS" LIBS="-lm $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5855: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -5868,12 +5882,12 @@ esac # enough, but on some of those systems, the assert macro relies on requoting # working properly! echo $ac_n "checking for working assert macro""... $ac_c" 1>&6 -echo "configure:5872: checking for working assert macro" >&5 +echo "configure:5886: checking for working assert macro" >&5 if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -5889,7 +5903,7 @@ assert (a == b ; return 0; } EOF -if { (eval echo configure:5893: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5907: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_assert_ok=yes else @@ -5930,12 +5944,12 @@ gas_test_headers=" " echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6 -echo "configure:5934: checking whether declaration is required for strstr" >&5 +echo "configure:5948: checking whether declaration is required for strstr" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5964: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_strstr=no else @@ -5967,12 +5981,12 @@ fi echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6 -echo "configure:5971: checking whether declaration is required for malloc" >&5 +echo "configure:5985: checking whether declaration is required for malloc" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:6001: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_malloc=no else @@ -6004,12 +6018,12 @@ fi echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6 -echo "configure:6008: checking whether declaration is required for free" >&5 +echo "configure:6022: checking whether declaration is required for free" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:6038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_free=no else @@ -6041,12 +6055,12 @@ fi echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6 -echo "configure:6045: checking whether declaration is required for sbrk" >&5 +echo "configure:6059: checking whether declaration is required for sbrk" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:6075: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_sbrk=no else @@ -6078,12 +6092,12 @@ fi echo $ac_n "checking whether declaration is required for environ""... $ac_c" 1>&6 -echo "configure:6082: checking whether declaration is required for environ" >&5 +echo "configure:6096: checking whether declaration is required for environ" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_environ'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:6112: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_environ=no else @@ -6118,12 +6132,12 @@ fi # for it? echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6 -echo "configure:6122: checking whether declaration is required for errno" >&5 +echo "configure:6136: checking whether declaration is required for errno" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:6156: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_errno=no else diff --git a/gas/configure.in b/gas/configure.in index ad46b8f..c89a2df 100644 --- a/gas/configure.in +++ b/gas/configure.in @@ -139,6 +139,8 @@ changequote([,])dnl powerpcle*) cpu_type=ppc endian=little ;; powerpc*) cpu_type=ppc endian=big ;; rs6000*) cpu_type=ppc ;; + s390x*) cpu_type=s390 arch=s390x ;; + s390*) cpu_type=s390 arch=s390 ;; sparclite*) cpu_type=sparc arch=sparclite ;; sparclet*) cpu_type=sparc arch=sparclet ;; sparc64*) cpu_type=sparc arch=v9-64 ;; @@ -377,6 +379,9 @@ changequote([,])dnl ppc-*-netware*) fmt=elf em=ppcnw ;; ppc-*-vxworks*) fmt=elf ;; + s390x-*-linux-gnu*) fmt=elf em=linux ;; + s390-*-linux-gnu*) fmt=elf em=linux ;; + sh-*-linux*) fmt=elf em=linux ;; sh-*-elf*) fmt=elf ;; sh-*-coff*) fmt=coff ;; @@ -523,6 +528,12 @@ changequote([,])dnl esac ;; + s390) + if test $this_target = $target ; then + AC_DEFINE_UNQUOTED(DEFAULT_ARCH, "${arch}", [Default architecture.]) + fi + ;; + mips) echo ${extra_objects} | grep -s "itbl-parse.o" if test $? -ne 0 ; then diff --git a/gas/po/POTFILES.in b/gas/po/POTFILES.in index 30dab30..d3d8df9 100644 --- a/gas/po/POTFILES.in +++ b/gas/po/POTFILES.in @@ -96,6 +96,8 @@ config/tc-pj.c config/tc-pj.h config/tc-ppc.c config/tc-ppc.h +config/tc-s390.c +config/tc-s390.h config/tc-sh.c config/tc-sh.h config/tc-sparc.c diff --git a/gas/po/gas.pot b/gas/po/gas.pot index 4428b64..47a8e96 100644 --- a/gas/po/gas.pot +++ b/gas/po/gas.pot @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2001-01-11 12:04-0800\n" +"POT-Creation-Date: 2001-02-09 16:34-0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -264,7 +264,7 @@ msgid "GNU assembler %s\n" msgstr "" #: as.c:528 -msgid "Copyright 2000 Free Software Foundation, Inc.\n" +msgid "Copyright 2001 Free Software Foundation, Inc.\n" msgstr "" #: as.c:529 gasp.c:3621 @@ -354,7 +354,7 @@ msgstr "" #. * This should never happen. #. #: atof-generic.c:437 config/tc-a29k.c:544 config/tc-i860.c:340 -#: config/tc-i860.c:832 config/tc-m68k.c:3176 config/tc-m68k.c:3205 +#: config/tc-i860.c:832 config/tc-m68k.c:3186 config/tc-m68k.c:3215 #: config/tc-sparc.c:2543 msgid "failed sanity check." msgstr "" @@ -627,7 +627,7 @@ msgstr "" msgid "Symbol %s already defined" msgstr "" -#: config/obj-coff.c:4176 config/tc-i960.c:3215 +#: config/obj-coff.c:4176 config/tc-i960.c:3214 #, c-format msgid "No 'bal' entry point for leafproc %s" msgstr "" @@ -649,7 +649,7 @@ msgstr "" #. This is a COBR instruction. They have only a 13-bit #. displacement and are only to be used for local branches: #. flag as error, don't generate relocation. -#: config/obj-coff.c:4411 config/tc-i960.c:3235 write.c:2733 +#: config/obj-coff.c:4411 config/tc-i960.c:3234 write.c:2733 msgid "can't use COBR format with external label" msgstr "" @@ -680,7 +680,7 @@ msgstr "" msgid ".COMMon length (%d.) <0! Ignored." msgstr "" -#: config/obj-elf.c:325 config/tc-alpha.c:4335 config/tc-sparc.c:3694 +#: config/obj-elf.c:325 config/tc-alpha.c:4331 config/tc-sparc.c:3694 #: config/tc-v850.c:282 msgid "Ignoring attempt to re-define symbol" msgstr "" @@ -694,7 +694,7 @@ msgstr "" msgid "Common alignment negative; 0 assumed" msgstr "" -#: config/obj-elf.c:375 config/tc-m32r.c:1286 config/tc-ppc.c:1518 +#: config/obj-elf.c:375 config/tc-m32r.c:1287 config/tc-ppc.c:1518 #: config/tc-v850.c:382 msgid "Common alignment not a power of 2" msgstr "" @@ -977,7 +977,7 @@ msgid "Unknown segment type" msgstr "" #. Probably a memory allocation problem? Give up now. -#: config/tc-a29k.c:330 config/tc-hppa.c:1412 config/tc-mips.c:1030 +#: config/tc-a29k.c:330 config/tc-hppa.c:1437 config/tc-mips.c:1030 #: config/tc-mips.c:1072 config/tc-sparc.c:846 msgid "Broken assembler. No assembly attempted." msgstr "" @@ -985,13 +985,14 @@ msgstr "" #: config/tc-a29k.c:375 config/tc-avr.c:1124 config/tc-d10v.c:532 #: config/tc-d30v.c:552 config/tc-h8300.c:296 config/tc-h8500.c:294 #: config/tc-mcore.c:655 config/tc-mn10200.c:954 config/tc-mn10300.c:1335 -#: config/tc-ppc.c:1974 config/tc-sh.c:838 config/tc-tic80.c:282 -#: config/tc-v850.c:2076 config/tc-w65.c:248 config/tc-z8k.c:336 +#: config/tc-ppc.c:1974 config/tc-s390.c:964 config/tc-sh.c:843 +#: config/tc-tic80.c:282 config/tc-v850.c:2076 config/tc-w65.c:248 +#: config/tc-z8k.c:336 msgid "missing operand" msgstr "" #: config/tc-a29k.c:415 config/tc-cris.c:913 config/tc-cris.c:921 -#: config/tc-hppa.c:1545 config/tc-i860.c:431 config/tc-i860.c:448 +#: config/tc-hppa.c:1572 config/tc-i860.c:431 config/tc-i860.c:448 #: config/tc-sparc.c:1408 config/tc-sparc.c:1414 #, c-format msgid "Unknown opcode: `%s'" @@ -1043,33 +1044,33 @@ msgstr "" msgid "Invalid register in & expression" msgstr "" -#: config/tc-alpha.c:837 +#: config/tc-alpha.c:827 #, c-format msgid "internal error: can't hash opcode `%s': %s" msgstr "" -#: config/tc-alpha.c:871 +#: config/tc-alpha.c:861 #, c-format msgid "internal error: can't hash macro `%s': %s" msgstr "" -#: config/tc-alpha.c:954 config/tc-i960.c:2700 +#: config/tc-alpha.c:945 config/tc-i960.c:2700 msgid "syntax error" msgstr "" -#: config/tc-alpha.c:1028 config/tc-arm.c:6629 config/tc-h8300.c:1373 -#: config/tc-h8500.c:1197 config/tc-hppa.c:3939 config/tc-i860.c:931 -#: config/tc-m68hc11.c:478 config/tc-m68k.c:4179 config/tc-m88k.c:1105 +#: config/tc-alpha.c:1019 config/tc-arm.c:6629 config/tc-h8300.c:1373 +#: config/tc-h8500.c:1197 config/tc-hppa.c:3990 config/tc-i860.c:931 +#: config/tc-m68hc11.c:481 config/tc-m68k.c:4189 config/tc-m88k.c:1105 #: config/tc-ns32k.c:1663 config/tc-sparc.c:2830 config/tc-z8k.c:1324 msgid "Bad call to MD_ATOF()" msgstr "" -#: config/tc-alpha.c:1078 +#: config/tc-alpha.c:1069 #, c-format msgid "Unknown CPU identifier `%s'" msgstr "" -#: config/tc-alpha.c:1122 +#: config/tc-alpha.c:1113 msgid "" "Alpha options:\n" "-32addr\t\t\ttreat addresses as 32-bit values\n" @@ -1080,293 +1081,294 @@ msgid "" "\t\t\tthese variants include PALcode opcodes\n" msgstr "" -#: config/tc-alpha.c:1132 +#: config/tc-alpha.c:1123 msgid "" "VMS options:\n" "-+\t\t\thash encode (don't truncate) names longer than 64 characters\n" "-H\t\t\tshow new symbol after hash truncation\n" msgstr "" -#: config/tc-alpha.c:1305 +#: config/tc-alpha.c:1296 #, c-format msgid "unhandled relocation type %s" msgstr "" -#: config/tc-alpha.c:1318 +#: config/tc-alpha.c:1309 msgid "non-absolute expression in constant field" msgstr "" -#: config/tc-alpha.c:1332 +#: config/tc-alpha.c:1323 #, c-format msgid "type %d reloc done?\n" msgstr "" -#: config/tc-alpha.c:1383 config/tc-alpha.c:1390 config/tc-mips.c:7356 +#: config/tc-alpha.c:1374 config/tc-alpha.c:1381 config/tc-mips.c:7356 msgid "Used $at without \".set noat\"" msgstr "" -#: config/tc-alpha.c:1572 +#: config/tc-alpha.c:1564 #, c-format msgid "cannot represent `%s' relocation in object file" msgstr "" -#: config/tc-alpha.c:1579 +#: config/tc-alpha.c:1571 #, c-format msgid "internal error? cannot generate `%s' relocation" msgstr "" -#: config/tc-alpha.c:1633 +#: config/tc-alpha.c:1625 #, c-format msgid "frame reg expected, using $%d." msgstr "" -#: config/tc-alpha.c:1758 +#: config/tc-alpha.c:1752 #, c-format msgid "No !literal!%d was found" msgstr "" #. only support one relocation op per insn -#: config/tc-alpha.c:1946 +#: config/tc-alpha.c:1939 msgid "More than one relocation op per insn" msgstr "" -#: config/tc-alpha.c:1963 +#: config/tc-alpha.c:1956 msgid "No relocation operand" msgstr "" -#: config/tc-alpha.c:1969 +#: config/tc-alpha.c:1962 #, c-format msgid "No !sequence-number after !%s" msgstr "" -#: config/tc-alpha.c:1982 +#: config/tc-alpha.c:1975 #, c-format msgid "Unknown relocation operand: !%s" msgstr "" -#: config/tc-alpha.c:1995 +#: config/tc-alpha.c:1989 #, c-format msgid "Bad sequence number: !%s!%s" msgstr "" -#: config/tc-alpha.c:2346 +#: config/tc-alpha.c:2341 #, c-format msgid "operand out of range (%s not between %d and %d)" msgstr "" -#: config/tc-alpha.c:2445 config/tc-d10v.c:621 config/tc-d30v.c:640 +#: config/tc-alpha.c:2440 config/tc-d10v.c:621 config/tc-d30v.c:640 #: config/tc-mn10200.c:1009 config/tc-mn10300.c:1406 config/tc-ppc.c:1940 -#: config/tc-ppc.c:2048 config/tc-ppc.c:2060 config/tc-v850.c:1856 -#: config/tc-v850.c:1879 config/tc-v850.c:2099 +#: config/tc-ppc.c:2048 config/tc-ppc.c:2060 config/tc-s390.c:971 +#: config/tc-s390.c:1014 config/tc-v850.c:1856 config/tc-v850.c:1879 +#: config/tc-v850.c:2099 msgid "too many fixups" msgstr "" -#: config/tc-alpha.c:2660 config/tc-alpha.c:2729 +#: config/tc-alpha.c:2656 config/tc-alpha.c:2725 #, c-format msgid "inappropriate arguments for opcode `%s'" msgstr "" -#: config/tc-alpha.c:2662 config/tc-alpha.c:2731 +#: config/tc-alpha.c:2658 config/tc-alpha.c:2727 #, c-format msgid "opcode `%s' not supported for target %s" msgstr "" -#: config/tc-alpha.c:2666 config/tc-alpha.c:2734 config/tc-avr.c:1090 +#: config/tc-alpha.c:2662 config/tc-alpha.c:2730 config/tc-avr.c:1090 #, c-format msgid "unknown opcode `%s'" msgstr "" -#: config/tc-alpha.c:2706 config/tc-alpha.c:2773 config/tc-alpha.c:3284 -#: config/tc-alpha.c:3344 config/tc-alpha.c:3396 config/tc-alpha.c:3471 -#: config/tc-alpha.c:3556 config/tc-alpha.c:3682 config/tc-alpha.c:3859 -#: config/tc-alpha.c:3916 config/tc-alpha.c:4026 config/tc-alpha.c:4133 -#: config/tc-alpha.c:4210 +#: config/tc-alpha.c:2702 config/tc-alpha.c:2768 config/tc-alpha.c:3280 +#: config/tc-alpha.c:3340 config/tc-alpha.c:3392 config/tc-alpha.c:3467 +#: config/tc-alpha.c:3552 config/tc-alpha.c:3678 config/tc-alpha.c:3855 +#: config/tc-alpha.c:3912 config/tc-alpha.c:4022 config/tc-alpha.c:4129 +#: config/tc-alpha.c:4206 #, c-format msgid "Cannot use !%s!%d with %s" msgstr "" -#: config/tc-alpha.c:2794 +#: config/tc-alpha.c:2789 msgid "can not resolve expression" msgstr "" -#: config/tc-alpha.c:2936 config/tc-alpha.c:3128 +#: config/tc-alpha.c:2931 config/tc-alpha.c:3124 msgid "overflow in literal (.lita) table" msgstr "" -#: config/tc-alpha.c:2943 config/tc-alpha.c:2966 config/tc-alpha.c:3141 -#: config/tc-alpha.c:3485 config/tc-alpha.c:3563 config/tc-alpha.c:3611 -#: config/tc-alpha.c:3711 config/tc-alpha.c:3936 config/tc-alpha.c:4048 +#: config/tc-alpha.c:2938 config/tc-alpha.c:2961 config/tc-alpha.c:3137 +#: config/tc-alpha.c:3481 config/tc-alpha.c:3559 config/tc-alpha.c:3607 +#: config/tc-alpha.c:3707 config/tc-alpha.c:3932 config/tc-alpha.c:4044 msgid "macro requires $at register while noat in effect" msgstr "" -#: config/tc-alpha.c:2945 config/tc-alpha.c:2968 config/tc-alpha.c:3143 +#: config/tc-alpha.c:2940 config/tc-alpha.c:2963 config/tc-alpha.c:3139 msgid "macro requires $at while $at in use" msgstr "" -#: config/tc-alpha.c:3090 expr.c:83 read.c:3164 +#: config/tc-alpha.c:3086 expr.c:83 read.c:3164 msgid "bignum invalid; zero assumed" msgstr "" -#: config/tc-alpha.c:3092 expr.c:85 read.c:3166 read.c:3499 read.c:4397 +#: config/tc-alpha.c:3088 expr.c:85 read.c:3166 read.c:3499 read.c:4397 msgid "floating point number invalid; zero assumed" msgstr "" -#: config/tc-alpha.c:3097 +#: config/tc-alpha.c:3093 msgid "can't handle expression" msgstr "" -#: config/tc-alpha.c:3134 +#: config/tc-alpha.c:3130 msgid "overflow in literal (.lit8) table" msgstr "" -#: config/tc-alpha.c:3306 +#: config/tc-alpha.c:3302 #, c-format msgid "bad instruction format for lda !%s!%ld" msgstr "" -#: config/tc-alpha.c:4306 config/tc-ppc.c:1467 config/tc-ppc.c:3689 +#: config/tc-alpha.c:4302 config/tc-ppc.c:1467 config/tc-ppc.c:3689 #: read.c:1369 #, c-format msgid ".COMMon length (%ld.) <0! Ignored." msgstr "" -#: config/tc-alpha.c:4344 config/tc-alpha.c:4353 config/tc-ppc.c:3726 +#: config/tc-alpha.c:4340 config/tc-alpha.c:4349 config/tc-ppc.c:3726 #: read.c:1393 #, c-format msgid "Length of .comm \"%s\" is already %ld. Not changed to %ld." msgstr "" -#: config/tc-alpha.c:4455 ecoff.c:3087 +#: config/tc-alpha.c:4451 ecoff.c:3087 msgid ".ent directive has no name" msgstr "" -#: config/tc-alpha.c:4463 +#: config/tc-alpha.c:4459 msgid "nested .ent directives" msgstr "" -#: config/tc-alpha.c:4499 ecoff.c:3035 +#: config/tc-alpha.c:4495 ecoff.c:3035 msgid ".end directive has no name" msgstr "" -#: config/tc-alpha.c:4508 +#: config/tc-alpha.c:4504 msgid ".end directive names different symbol than .ent" msgstr "" -#: config/tc-alpha.c:4585 +#: config/tc-alpha.c:4581 #, c-format msgid "Invalid argument %d to .prologue." msgstr "" -#: config/tc-alpha.c:4677 +#: config/tc-alpha.c:4673 msgid "ECOFF debugging is disabled." msgstr "" -#: config/tc-alpha.c:4698 +#: config/tc-alpha.c:4694 msgid "Unknown section directive" msgstr "" -#: config/tc-alpha.c:4734 +#: config/tc-alpha.c:4730 msgid ".ent directive has no symbol" msgstr "" -#: config/tc-alpha.c:4761 +#: config/tc-alpha.c:4757 msgid "Bad .frame directive 1./2. param" msgstr "" -#: config/tc-alpha.c:4773 +#: config/tc-alpha.c:4769 msgid "Bad .frame directive 3./4. param" msgstr "" -#: config/tc-alpha.c:4798 +#: config/tc-alpha.c:4794 msgid ".pdesc directive not in link (.link) section" msgstr "" -#: config/tc-alpha.c:4806 +#: config/tc-alpha.c:4802 msgid ".pdesc has no matching .ent" msgstr "" -#: config/tc-alpha.c:4817 +#: config/tc-alpha.c:4813 msgid ".pdesc directive has no entry symbol" msgstr "" -#: config/tc-alpha.c:4830 +#: config/tc-alpha.c:4826 msgid "No comma after .pdesc " msgstr "" -#: config/tc-alpha.c:4853 +#: config/tc-alpha.c:4849 msgid "unknown procedure kind" msgstr "" -#: config/tc-alpha.c:4947 +#: config/tc-alpha.c:4942 msgid ".name directive not in link (.link) section" msgstr "" -#: config/tc-alpha.c:4955 +#: config/tc-alpha.c:4950 msgid ".name directive has no symbol" msgstr "" -#: config/tc-alpha.c:4989 +#: config/tc-alpha.c:4984 msgid "No symbol after .linkage" msgstr "" -#: config/tc-alpha.c:5017 +#: config/tc-alpha.c:5012 msgid "No symbol after .code_address" msgstr "" -#: config/tc-alpha.c:5050 ecoff.c:3253 +#: config/tc-alpha.c:5045 ecoff.c:3253 msgid "Bad .mask directive" msgstr "" -#: config/tc-alpha.c:5071 ecoff.c:3183 +#: config/tc-alpha.c:5066 ecoff.c:3183 msgid "Bad .fmask directive" msgstr "" -#: config/tc-alpha.c:5241 config/tc-arm.c:1593 read.c:2150 read.c:2737 +#: config/tc-alpha.c:5236 config/tc-arm.c:1593 read.c:2150 read.c:2737 #: stabs.c:464 #, c-format msgid "Expected comma after name \"%s\"" msgstr "" #. *symbol_get_obj (symbolP) = (signed char) temp; -#: config/tc-alpha.c:5252 +#: config/tc-alpha.c:5247 #, c-format msgid "unhandled: .proc %s,%d" msgstr "" -#: config/tc-alpha.c:5287 +#: config/tc-alpha.c:5282 #, c-format msgid "Tried to .set unrecognized mode `%s'" msgstr "" #. not fatal, but it might not work in the end -#: config/tc-alpha.c:5304 +#: config/tc-alpha.c:5299 msgid "File overrides no-base-register option." msgstr "" -#: config/tc-alpha.c:5321 +#: config/tc-alpha.c:5316 #, c-format msgid "Bad base register, using $%d." msgstr "" -#: config/tc-alpha.c:5343 +#: config/tc-alpha.c:5338 #, c-format msgid "Alignment too large: %d. assumed" msgstr "" -#: config/tc-alpha.c:5347 config/tc-d30v.c:2219 +#: config/tc-alpha.c:5342 config/tc-d30v.c:2219 msgid "Alignment negative: 0 assumed" msgstr "" -#: config/tc-alpha.c:5662 +#: config/tc-alpha.c:5654 #, c-format msgid "Chose GP value of %lx\n" msgstr "" -#: config/tc-arc.c:1618 config/tc-arm.c:7532 +#: config/tc-arc.c:1608 config/tc-arm.c:7532 msgid "md_estimate_size_before_relax\n" msgstr "" -#: config/tc-arc.c:1630 +#: config/tc-arc.c:1620 msgid "md_convert_frag\n" msgstr "" @@ -1407,7 +1409,7 @@ msgstr "" msgid "Alignment negative. 0 assumed." msgstr "" -#: config/tc-arm.c:1643 config/tc-m32r.c:417 read.c:2795 read.c:4857 +#: config/tc-arm.c:1643 config/tc-m32r.c:418 read.c:2795 read.c:4857 #, c-format msgid "symbol `%s' already defined" msgstr "" @@ -1683,7 +1685,7 @@ msgstr "" #: config/tc-arm.c:4569 config/tc-avr.c:852 config/tc-cris.c:2733 #: config/tc-d10v.c:1560 config/tc-d30v.c:1865 config/tc-mips.c:3230 #: config/tc-mips.c:4162 config/tc-mips.c:4947 config/tc-mips.c:5493 -#: config/tc-ppc.c:4854 config/tc-v850.c:2385 +#: config/tc-ppc.c:4853 config/tc-v850.c:2385 msgid "expression too complex" msgstr "" @@ -1947,7 +1949,7 @@ msgstr "" msgid "Cannot represent %s relocation in this object file format" msgstr "" -#: config/tc-arm.c:7514 config/tc-mips.c:11261 config/tc-sh.c:3177 +#: config/tc-arm.c:7514 config/tc-mips.c:11261 config/tc-sh.c:3182 #, c-format msgid "Can not represent %s relocation in this object file format" msgstr "" @@ -2103,7 +2105,7 @@ msgstr "" #: config/tc-avr.c:372 config/tc-d10v.c:313 config/tc-d30v.c:366 #: config/tc-mips.c:8789 config/tc-mn10200.c:375 config/tc-pj.c:356 -#: config/tc-ppc.c:4518 config/tc-sh.c:2058 config/tc-v850.c:1291 +#: config/tc-ppc.c:4518 config/tc-sh.c:2063 config/tc-v850.c:1291 msgid "bad call to md_atof" msgstr "" @@ -2197,7 +2199,7 @@ msgid "only constant expression allowed" msgstr "" #: config/tc-avr.c:1060 config/tc-d10v.c:1495 config/tc-d30v.c:1807 -#: config/tc-mn10200.c:1254 config/tc-mn10300.c:1810 config/tc-ppc.c:5161 +#: config/tc-mn10200.c:1254 config/tc-mn10300.c:1810 config/tc-ppc.c:5160 #: config/tc-v850.c:2301 #, c-format msgid "reloc %d not supported by object file format" @@ -2205,7 +2207,7 @@ msgstr "" #: config/tc-avr.c:1084 config/tc-d10v.c:1102 config/tc-d10v.c:1116 #: config/tc-h8300.c:1239 config/tc-h8500.c:1098 config/tc-mcore.c:988 -#: config/tc-pj.c:265 config/tc-sh.c:1640 config/tc-z8k.c:1195 +#: config/tc-pj.c:265 config/tc-sh.c:1645 config/tc-z8k.c:1195 msgid "can't find opcode " msgstr "" @@ -2415,8 +2417,8 @@ msgid "" msgstr "" #: config/tc-d10v.c:530 config/tc-d30v.c:550 config/tc-mn10200.c:951 -#: config/tc-mn10300.c:1332 config/tc-ppc.c:1972 config/tc-tic80.c:278 -#: config/tc-v850.c:2073 +#: config/tc-mn10300.c:1332 config/tc-ppc.c:1972 config/tc-s390.c:962 +#: config/tc-tic80.c:278 config/tc-v850.c:2073 msgid "illegal operand" msgstr "" @@ -2485,7 +2487,7 @@ msgstr "" msgid "bad opcode or operands" msgstr "" -#: config/tc-d10v.c:1353 config/tc-m68k.c:4286 +#: config/tc-d10v.c:1353 config/tc-m68k.c:4296 msgid "value out of range" msgstr "" @@ -2653,7 +2655,7 @@ msgstr "" msgid "Instruction %s not allowed in a delay slot." msgstr "" -#: config/tc-fr30.c:380 config/tc-m32r.c:1555 +#: config/tc-fr30.c:380 config/tc-m32r.c:1556 msgid "Addend to unresolved symbol not on word boundary." msgstr "" @@ -2734,7 +2736,7 @@ msgid "invalid operands" msgstr "" #: config/tc-h8300.c:1250 config/tc-h8500.c:1104 config/tc-mips.c:7984 -#: config/tc-sh.c:1877 config/tc-w65.c:740 config/tc-z8k.c:1205 +#: config/tc-sh.c:1882 config/tc-w65.c:740 config/tc-z8k.c:1205 msgid "unknown opcode" msgstr "" @@ -2742,12 +2744,12 @@ msgstr "" msgid "mismatch between opcode size and operand size" msgstr "" -#: config/tc-h8300.c:1307 config/tc-h8500.c:1131 config/tc-sh.c:2013 +#: config/tc-h8300.c:1307 config/tc-h8500.c:1131 config/tc-sh.c:2018 #: config/tc-w65.c:770 config/tc-z8k.c:1258 msgid "call to tc_crawl_symbol_chain \n" msgstr "" -#: config/tc-h8300.c:1321 config/tc-h8500.c:1145 config/tc-sh.c:2020 +#: config/tc-h8300.c:1321 config/tc-h8500.c:1145 config/tc-sh.c:2025 #: config/tc-w65.c:784 config/tc-z8k.c:1272 msgid "call to tc_headers_hook \n" msgstr "" @@ -2792,448 +2794,448 @@ msgstr "" msgid "@Rn needs word register" msgstr "" -#: config/tc-h8500.c:838 config/tc-sh.c:1357 +#: config/tc-h8500.c:838 config/tc-sh.c:1362 #, c-format msgid "unhandled %d\n" msgstr "" -#: config/tc-h8500.c:866 config/tc-sh.c:1382 +#: config/tc-h8500.c:866 config/tc-sh.c:1387 #, c-format msgid "operand must be absolute in range %d..%d" msgstr "" -#: config/tc-h8500.c:955 config/tc-sh.c:1580 +#: config/tc-h8500.c:955 config/tc-sh.c:1585 #, c-format msgid "failed for %d\n" msgstr "" -#: config/tc-h8500.c:1120 config/tc-sh.c:1681 config/tc-sh.c:1926 +#: config/tc-h8500.c:1120 config/tc-sh.c:1686 config/tc-sh.c:1931 #: config/tc-w65.c:759 msgid "invalid operands for opcode" msgstr "" #. Simple range checking for FIELD againt HIGH and LOW bounds. #. IGNORE is used to suppress the error message. -#: config/tc-hppa.c:1119 +#: config/tc-hppa.c:1144 #, c-format msgid "Field out of range [%d..%d] (%d)." msgstr "" #. Simple alignment checking for FIELD againt ALIGN (a power of two). #. IGNORE is used to suppress the error message. -#: config/tc-hppa.c:1133 +#: config/tc-hppa.c:1158 #, c-format msgid "Field not properly aligned [%d] (%d)." msgstr "" -#: config/tc-hppa.c:1162 +#: config/tc-hppa.c:1187 msgid "Missing .exit\n" msgstr "" -#: config/tc-hppa.c:1165 +#: config/tc-hppa.c:1190 msgid "Missing .procend\n" msgstr "" -#: config/tc-hppa.c:1345 +#: config/tc-hppa.c:1370 msgid "Invalid field selector. Assuming F%%." msgstr "" -#: config/tc-hppa.c:1372 config/tc-hppa.c:6839 config/tc-hppa.c:6845 -#: config/tc-hppa.c:6851 config/tc-hppa.c:6857 config/tc-mn10300.c:924 +#: config/tc-hppa.c:1397 config/tc-hppa.c:6889 config/tc-hppa.c:6895 +#: config/tc-hppa.c:6901 config/tc-hppa.c:6907 config/tc-mn10300.c:924 #: config/tc-mn10300.c:2133 msgid "could not set architecture and machine" msgstr "" -#: config/tc-hppa.c:1378 +#: config/tc-hppa.c:1403 msgid "-R option not supported on this target." msgstr "" -#: config/tc-hppa.c:1394 config/tc-sparc.c:802 config/tc-sparc.c:838 +#: config/tc-hppa.c:1419 config/tc-sparc.c:802 config/tc-sparc.c:838 #, c-format msgid "Internal error: can't hash `%s': %s\n" msgstr "" -#: config/tc-hppa.c:1402 config/tc-i860.c:190 +#: config/tc-hppa.c:1427 config/tc-i860.c:190 #, c-format msgid "internal error: losing opcode: `%s' \"%s\"\n" msgstr "" -#: config/tc-hppa.c:1471 config/tc-hppa.c:6978 config/tc-hppa.c:7033 +#: config/tc-hppa.c:1498 config/tc-hppa.c:7028 config/tc-hppa.c:7085 msgid "Missing function name for .PROC (corrupted label chain)" msgstr "" -#: config/tc-hppa.c:1474 config/tc-hppa.c:7036 +#: config/tc-hppa.c:1501 config/tc-hppa.c:7088 msgid "Missing function name for .PROC" msgstr "" -#: config/tc-hppa.c:1582 config/tc-hppa.c:4812 +#: config/tc-hppa.c:1609 config/tc-hppa.c:4869 msgid "could not update architecture and machine" msgstr "" -#: config/tc-hppa.c:1789 +#: config/tc-hppa.c:1816 msgid "Invalid Indexed Load Completer." msgstr "" -#: config/tc-hppa.c:1794 +#: config/tc-hppa.c:1821 msgid "Invalid Indexed Load Completer Syntax." msgstr "" -#: config/tc-hppa.c:1830 +#: config/tc-hppa.c:1857 msgid "Invalid Short Load/Store Completer." msgstr "" -#: config/tc-hppa.c:1889 config/tc-hppa.c:1894 +#: config/tc-hppa.c:1916 config/tc-hppa.c:1921 msgid "Invalid Store Bytes Short Completer" msgstr "" -#: config/tc-hppa.c:2205 config/tc-hppa.c:2211 +#: config/tc-hppa.c:2232 config/tc-hppa.c:2238 msgid "Invalid left/right combination completer" msgstr "" -#: config/tc-hppa.c:2260 config/tc-hppa.c:2267 +#: config/tc-hppa.c:2287 config/tc-hppa.c:2294 msgid "Invalid permutation completer" msgstr "" -#: config/tc-hppa.c:2368 +#: config/tc-hppa.c:2395 #, c-format msgid "Invalid Add Condition: %s" msgstr "" -#: config/tc-hppa.c:2379 config/tc-hppa.c:2389 +#: config/tc-hppa.c:2406 config/tc-hppa.c:2416 #, c-format msgid "Invalid Add and Branch Condition: %c" msgstr "" -#: config/tc-hppa.c:2410 +#: config/tc-hppa.c:2437 msgid "Invalid Compare/Subtract Condition" msgstr "" -#: config/tc-hppa.c:2450 +#: config/tc-hppa.c:2477 #, c-format msgid "Invalid Bit Branch Condition: %c" msgstr "" -#: config/tc-hppa.c:2536 +#: config/tc-hppa.c:2563 #, c-format msgid "Invalid Compare/Subtract Condition: %s" msgstr "" -#: config/tc-hppa.c:2548 +#: config/tc-hppa.c:2575 #, c-format msgid "Invalid Compare/Subtract Condition: %c" msgstr "" -#: config/tc-hppa.c:2563 +#: config/tc-hppa.c:2590 msgid "Invalid Compare and Branch Condition." msgstr "" -#: config/tc-hppa.c:2659 +#: config/tc-hppa.c:2686 msgid "Invalid Logical Instruction Condition." msgstr "" -#: config/tc-hppa.c:2714 +#: config/tc-hppa.c:2741 msgid "Invalid Shift/Extract/Deposit Condition." msgstr "" -#: config/tc-hppa.c:2826 +#: config/tc-hppa.c:2853 msgid "Invalid Unit Instruction Condition." msgstr "" -#: config/tc-hppa.c:3174 config/tc-hppa.c:3205 config/tc-hppa.c:3238 -#: config/tc-hppa.c:3270 +#: config/tc-hppa.c:3230 config/tc-hppa.c:3262 config/tc-hppa.c:3293 +#: config/tc-hppa.c:3323 msgid "Branch to unaligned address" msgstr "" -#: config/tc-hppa.c:3450 +#: config/tc-hppa.c:3501 msgid "Invalid SFU identifier" msgstr "" -#: config/tc-hppa.c:3500 +#: config/tc-hppa.c:3551 msgid "Invalid COPR identifier" msgstr "" -#: config/tc-hppa.c:3629 +#: config/tc-hppa.c:3680 msgid "Invalid Floating Point Operand Format." msgstr "" -#: config/tc-hppa.c:3746 config/tc-hppa.c:3766 config/tc-hppa.c:3786 -#: config/tc-hppa.c:3806 config/tc-hppa.c:3826 +#: config/tc-hppa.c:3797 config/tc-hppa.c:3817 config/tc-hppa.c:3837 +#: config/tc-hppa.c:3857 config/tc-hppa.c:3877 msgid "Invalid register for single precision fmpyadd or fmpysub" msgstr "" -#: config/tc-hppa.c:3883 +#: config/tc-hppa.c:3934 #, c-format msgid "Invalid operands %s" msgstr "" -#: config/tc-hppa.c:4001 +#: config/tc-hppa.c:4052 #, c-format msgid "Cannot handle fixup at %s:%d" msgstr "" -#: config/tc-hppa.c:4296 +#: config/tc-hppa.c:4353 msgid " -Q ignored\n" msgstr "" -#: config/tc-hppa.c:4300 +#: config/tc-hppa.c:4357 msgid " -c print a warning if a comment is found\n" msgstr "" -#: config/tc-hppa.c:4366 +#: config/tc-hppa.c:4423 #, c-format msgid "no hppa_fixup entry for fixup type 0x%x at %s:%d" msgstr "" -#: config/tc-hppa.c:4533 +#: config/tc-hppa.c:4590 msgid "Unknown relocation encountered in md_apply_fix." msgstr "" -#: config/tc-hppa.c:4676 config/tc-hppa.c:4701 +#: config/tc-hppa.c:4733 config/tc-hppa.c:4758 #, c-format msgid "Undefined register: '%s'." msgstr "" -#: config/tc-hppa.c:4735 +#: config/tc-hppa.c:4792 #, c-format msgid "Non-absolute symbol: '%s'." msgstr "" -#: config/tc-hppa.c:4750 +#: config/tc-hppa.c:4807 #, c-format msgid "Undefined absolute constant: '%s'." msgstr "" -#: config/tc-hppa.c:4851 +#: config/tc-hppa.c:4908 #, c-format msgid "Invalid FP Compare Condition: %s" msgstr "" -#: config/tc-hppa.c:4907 +#: config/tc-hppa.c:4964 #, c-format msgid "Invalid FTEST completer: %s" msgstr "" -#: config/tc-hppa.c:4974 config/tc-hppa.c:5012 +#: config/tc-hppa.c:5031 config/tc-hppa.c:5069 #, c-format msgid "Invalid FP Operand Format: %3s" msgstr "" -#: config/tc-hppa.c:5091 +#: config/tc-hppa.c:5148 msgid "Bad segment in expression." msgstr "" -#: config/tc-hppa.c:5150 +#: config/tc-hppa.c:5207 msgid "Bad segment (should be absolute)." msgstr "" -#: config/tc-hppa.c:5193 +#: config/tc-hppa.c:5250 #, c-format msgid "Invalid argument location: %s\n" msgstr "" -#: config/tc-hppa.c:5224 +#: config/tc-hppa.c:5281 #, c-format msgid "Invalid argument description: %d" msgstr "" -#: config/tc-hppa.c:5247 +#: config/tc-hppa.c:5304 #, c-format msgid "Invalid Nullification: (%c)" msgstr "" -#: config/tc-hppa.c:5983 +#: config/tc-hppa.c:6040 #, c-format msgid "Invalid .CALL argument: %s" msgstr "" -#: config/tc-hppa.c:6114 +#: config/tc-hppa.c:6162 msgid ".callinfo is not within a procedure definition" msgstr "" -#: config/tc-hppa.c:6134 +#: config/tc-hppa.c:6182 #, c-format msgid "FRAME parameter must be a multiple of 8: %d\n" msgstr "" -#: config/tc-hppa.c:6153 +#: config/tc-hppa.c:6201 msgid "Value for ENTRY_GR must be in the range 3..18\n" msgstr "" -#: config/tc-hppa.c:6165 +#: config/tc-hppa.c:6213 msgid "Value for ENTRY_FR must be in the range 12..21\n" msgstr "" -#: config/tc-hppa.c:6175 +#: config/tc-hppa.c:6223 msgid "Value for ENTRY_SR must be 3\n" msgstr "" -#: config/tc-hppa.c:6231 +#: config/tc-hppa.c:6279 #, c-format msgid "Invalid .CALLINFO argument: %s" msgstr "" -#: config/tc-hppa.c:6342 +#: config/tc-hppa.c:6390 msgid "The .ENTER pseudo-op is not supported" msgstr "" -#: config/tc-hppa.c:6358 +#: config/tc-hppa.c:6406 msgid "Misplaced .entry. Ignored." msgstr "" -#: config/tc-hppa.c:6362 +#: config/tc-hppa.c:6410 msgid "Missing .callinfo." msgstr "" -#: config/tc-hppa.c:6426 +#: config/tc-hppa.c:6476 msgid ".REG expression must be a register" msgstr "" -#: config/tc-hppa.c:6442 read.c:4728 +#: config/tc-hppa.c:6492 read.c:4728 msgid "bad or irreducible absolute expression; zero assumed" msgstr "" -#: config/tc-hppa.c:6453 +#: config/tc-hppa.c:6503 msgid ".REG must use a label" msgstr "" -#: config/tc-hppa.c:6455 +#: config/tc-hppa.c:6505 msgid ".EQU must use a label" msgstr "" -#: config/tc-hppa.c:6508 +#: config/tc-hppa.c:6558 msgid ".EXIT must appear within a procedure" msgstr "" -#: config/tc-hppa.c:6512 +#: config/tc-hppa.c:6562 msgid "Missing .callinfo" msgstr "" -#: config/tc-hppa.c:6516 +#: config/tc-hppa.c:6566 msgid "No .ENTRY for this .EXIT" msgstr "" -#: config/tc-hppa.c:6543 +#: config/tc-hppa.c:6593 #, c-format msgid "Cannot define export symbol: %s\n" msgstr "" -#: config/tc-hppa.c:6601 +#: config/tc-hppa.c:6651 #, c-format msgid "Using ENTRY rather than CODE in export directive for %s" msgstr "" -#: config/tc-hppa.c:6718 +#: config/tc-hppa.c:6768 #, c-format msgid "Undefined .EXPORT/.IMPORT argument (ignored): %s" msgstr "" -#: config/tc-hppa.c:6800 +#: config/tc-hppa.c:6850 msgid "Missing label name on .LABEL" msgstr "" -#: config/tc-hppa.c:6805 +#: config/tc-hppa.c:6855 msgid "extra .LABEL arguments ignored." msgstr "" -#: config/tc-hppa.c:6822 +#: config/tc-hppa.c:6872 msgid "The .LEAVE pseudo-op is not supported" msgstr "" -#: config/tc-hppa.c:6861 +#: config/tc-hppa.c:6911 msgid "Unrecognized .LEVEL argument\n" msgstr "" -#: config/tc-hppa.c:6897 +#: config/tc-hppa.c:6947 #, c-format msgid "Cannot define static symbol: %s\n" msgstr "" -#: config/tc-hppa.c:6932 +#: config/tc-hppa.c:6982 msgid "Nested procedures" msgstr "" -#: config/tc-hppa.c:6942 +#: config/tc-hppa.c:6992 msgid "Cannot allocate unwind descriptor\n" msgstr "" -#: config/tc-hppa.c:7040 +#: config/tc-hppa.c:7092 msgid "misplaced .procend" msgstr "" -#: config/tc-hppa.c:7043 +#: config/tc-hppa.c:7095 msgid "Missing .callinfo for this procedure" msgstr "" -#: config/tc-hppa.c:7046 +#: config/tc-hppa.c:7098 msgid "Missing .EXIT for a .ENTRY" msgstr "" -#: config/tc-hppa.c:7084 +#: config/tc-hppa.c:7136 msgid "Not in a space.\n" msgstr "" -#: config/tc-hppa.c:7087 +#: config/tc-hppa.c:7139 msgid "Not in a subspace.\n" msgstr "" -#: config/tc-hppa.c:7178 +#: config/tc-hppa.c:7230 msgid "Invalid .SPACE argument" msgstr "" -#: config/tc-hppa.c:7225 +#: config/tc-hppa.c:7277 msgid "Can't change spaces within a procedure definition. Ignored" msgstr "" -#: config/tc-hppa.c:7354 +#: config/tc-hppa.c:7406 #, c-format msgid "Undefined space: '%s' Assuming space number = 0." msgstr "" -#: config/tc-hppa.c:7378 +#: config/tc-hppa.c:7430 msgid "Must be in a space before changing or declaring subspaces.\n" msgstr "" -#: config/tc-hppa.c:7382 +#: config/tc-hppa.c:7434 msgid "Can't change subspaces within a procedure definition. Ignored" msgstr "" -#: config/tc-hppa.c:7417 +#: config/tc-hppa.c:7469 msgid "Parameters of an existing subspace can't be modified" msgstr "" -#: config/tc-hppa.c:7468 +#: config/tc-hppa.c:7520 msgid "Alignment must be a power of 2" msgstr "" -#: config/tc-hppa.c:7510 +#: config/tc-hppa.c:7562 msgid "FIRST not supported as a .SUBSPACE argument" msgstr "" -#: config/tc-hppa.c:7512 +#: config/tc-hppa.c:7564 msgid "Invalid .SUBSPACE argument" msgstr "" -#: config/tc-hppa.c:7692 +#: config/tc-hppa.c:7744 #, c-format msgid "Internal error: Unable to find containing space for %s." msgstr "" -#: config/tc-hppa.c:7731 +#: config/tc-hppa.c:7783 #, c-format msgid "Out of memory: could not allocate new space chain entry: %s\n" msgstr "" -#: config/tc-hppa.c:7817 +#: config/tc-hppa.c:7869 #, c-format msgid "Out of memory: could not allocate new subspace chain entry: %s\n" msgstr "" -#: config/tc-hppa.c:8511 +#: config/tc-hppa.c:8563 #, c-format msgid "Symbol '%s' could not be created." msgstr "" -#: config/tc-hppa.c:8515 +#: config/tc-hppa.c:8567 msgid "No memory for symbol name." msgstr "" @@ -3267,314 +3269,317 @@ msgstr "" msgid "missing cpu architecture" msgstr "" -#: config/tc-i386.c:812 config/tc-i386.c:835 config/tc-m68k.c:3802 +#: config/tc-i386.c:790 config/tc-i386.c:4492 +msgid "Unknown architecture" +msgstr "" + +#: config/tc-i386.c:825 config/tc-i386.c:848 config/tc-m68k.c:3812 #, c-format msgid "Internal Error: Can't hash %s: %s" msgstr "" -#: config/tc-i386.c:1088 +#: config/tc-i386.c:1101 msgid "There are no unsigned pc-relative relocations" msgstr "" -#: config/tc-i386.c:1095 config/tc-i386.c:4622 +#: config/tc-i386.c:1108 config/tc-i386.c:4639 #, c-format msgid "can not do %d byte pc-relative relocation" msgstr "" -#: config/tc-i386.c:1112 +#: config/tc-i386.c:1125 #, c-format msgid "can not do %s %d byte relocation" msgstr "" -#: config/tc-i386.c:1221 config/tc-i386.c:1314 +#: config/tc-i386.c:1234 config/tc-i386.c:1327 #, c-format msgid "no such instruction: `%s'" msgstr "" -#: config/tc-i386.c:1230 +#: config/tc-i386.c:1243 #, c-format msgid "invalid character %s in mnemonic" msgstr "" -#: config/tc-i386.c:1237 +#: config/tc-i386.c:1250 msgid "expecting prefix; got nothing" msgstr "" -#: config/tc-i386.c:1239 +#: config/tc-i386.c:1252 msgid "expecting mnemonic; got nothing" msgstr "" -#: config/tc-i386.c:1257 +#: config/tc-i386.c:1270 #, c-format msgid "redundant %s prefix" msgstr "" -#: config/tc-i386.c:1325 +#: config/tc-i386.c:1338 #, c-format msgid "`%s' is not supported on `%s'" msgstr "" -#: config/tc-i386.c:1330 +#: config/tc-i386.c:1343 msgid "use .code16 to ensure correct addressing mode" msgstr "" -#: config/tc-i386.c:1338 +#: config/tc-i386.c:1351 #, c-format msgid "expecting string instruction after `%s'" msgstr "" -#: config/tc-i386.c:1359 +#: config/tc-i386.c:1372 #, c-format msgid "invalid character %s before operand %d" msgstr "" -#: config/tc-i386.c:1373 +#: config/tc-i386.c:1386 #, c-format msgid "unbalanced parenthesis in operand %d." msgstr "" -#: config/tc-i386.c:1376 +#: config/tc-i386.c:1389 #, c-format msgid "unbalanced brackets in operand %d." msgstr "" -#: config/tc-i386.c:1385 +#: config/tc-i386.c:1398 #, c-format msgid "invalid character %s in operand %d" msgstr "" -#: config/tc-i386.c:1412 +#: config/tc-i386.c:1425 #, c-format msgid "spurious operands; (%d operands/instruction max)" msgstr "" -#: config/tc-i386.c:1435 +#: config/tc-i386.c:1448 msgid "expecting operand after ','; got nothing" msgstr "" -#: config/tc-i386.c:1440 +#: config/tc-i386.c:1453 msgid "expecting operand before ','; got nothing" msgstr "" #. We found no match. -#: config/tc-i386.c:1782 +#: config/tc-i386.c:1801 #, c-format msgid "suffix or operands invalid for `%s'" msgstr "" -#: config/tc-i386.c:1793 +#: config/tc-i386.c:1812 #, c-format msgid "indirect %s without `*'" msgstr "" #. Warn them that a data or address size prefix doesn't #. affect assembly of the next line of code. -#: config/tc-i386.c:1801 +#: config/tc-i386.c:1820 #, c-format msgid "stand-alone `%s' prefix" msgstr "" -#: config/tc-i386.c:1837 config/tc-i386.c:1852 +#: config/tc-i386.c:1856 config/tc-i386.c:1871 msgid "`%s' operand %d must use `%%es' segment" msgstr "" -#: config/tc-i386.c:1867 +#: config/tc-i386.c:1886 msgid "Extended register `%%%s' available only in 64bit mode." msgstr "" #. Prohibit these changes in the 64bit mode, since #. the lowering is more complicated. -#: config/tc-i386.c:1938 config/tc-i386.c:1989 config/tc-i386.c:2004 -#: config/tc-i386.c:2032 config/tc-i386.c:2060 +#: config/tc-i386.c:1957 config/tc-i386.c:2008 config/tc-i386.c:2023 +#: config/tc-i386.c:2051 config/tc-i386.c:2079 msgid "Incorrect register `%%%s' used with`%c' suffix" msgstr "" -#: config/tc-i386.c:1944 config/tc-i386.c:1994 config/tc-i386.c:2065 +#: config/tc-i386.c:1963 config/tc-i386.c:2013 config/tc-i386.c:2084 msgid "using `%%%s' instead of `%%%s' due to `%c' suffix" msgstr "" -#: config/tc-i386.c:1957 config/tc-i386.c:1975 config/tc-i386.c:2019 -#: config/tc-i386.c:2046 +#: config/tc-i386.c:1976 config/tc-i386.c:1994 config/tc-i386.c:2038 +#: config/tc-i386.c:2065 msgid "`%%%s' not allowed with `%s%c'" msgstr "" -#: config/tc-i386.c:2106 +#: config/tc-i386.c:2125 msgid "no instruction mnemonic suffix given; can't determine immediate size" msgstr "" -#: config/tc-i386.c:2132 +#: config/tc-i386.c:2151 #, c-format msgid "" "no instruction mnemonic suffix given; can't determine immediate size %x %c" msgstr "" -#: config/tc-i386.c:2157 +#: config/tc-i386.c:2176 msgid "" "no instruction mnemonic suffix given and no register operands; can't size " "instruction" msgstr "" -#: config/tc-i386.c:2205 +#: config/tc-i386.c:2224 msgid "64bit operations available only in 64bit modes." msgstr "" #. Reversed arguments on faddp, fsubp, etc. -#: config/tc-i386.c:2273 +#: config/tc-i386.c:2292 msgid "translating to `%s %%%s,%%%s'" msgstr "" #. Extraneous `l' suffix on fp insn. -#: config/tc-i386.c:2280 +#: config/tc-i386.c:2299 msgid "translating to `%s %%%s'" msgstr "" -#: config/tc-i386.c:2551 +#: config/tc-i386.c:2572 msgid "you can't `pop %%cs'" msgstr "" #. UnixWare fsub no args is alias for fsubp, fadd -> faddp, etc. -#: config/tc-i386.c:2584 +#: config/tc-i386.c:2605 #, c-format msgid "translating to `%sp'" msgstr "" -#: config/tc-i386.c:2627 +#: config/tc-i386.c:2648 msgid "" "Can't encode registers '%%%s' in the instruction requiring REX prefix.\n" msgstr "" -#: config/tc-i386.c:2679 config/tc-i386.c:2751 config/tc-i386.c:2798 +#: config/tc-i386.c:2700 config/tc-i386.c:2772 config/tc-i386.c:2819 msgid "skipping prefixes on this instruction" msgstr "" -#: config/tc-i386.c:2819 +#: config/tc-i386.c:2840 msgid "16-bit jump out of range" msgstr "" -#: config/tc-i386.c:2828 +#: config/tc-i386.c:2849 #, c-format msgid "can't handle non absolute segment in `%s'" msgstr "" -#: config/tc-i386.c:3085 +#: config/tc-i386.c:3106 msgid "only 1 or 2 immediate operands are allowed" msgstr "" -#: config/tc-i386.c:3115 config/tc-i386.c:3353 +#: config/tc-i386.c:3136 config/tc-i386.c:3374 msgid "GOT relocations not supported in 16 bit mode" msgstr "" -#: config/tc-i386.c:3152 config/tc-i386.c:3389 +#: config/tc-i386.c:3173 config/tc-i386.c:3410 msgid "bad reloc specifier in expression" msgstr "" -#: config/tc-i386.c:3170 config/tc-i386.c:3424 +#: config/tc-i386.c:3191 config/tc-i386.c:3445 #, c-format msgid "ignoring junk `%s' after expression" msgstr "" #. Missing or bad expr becomes absolute 0. -#: config/tc-i386.c:3177 +#: config/tc-i386.c:3198 #, c-format msgid "missing or invalid immediate expression `%s' taken as 0" msgstr "" -#: config/tc-i386.c:3208 config/tc-i386.c:3454 +#: config/tc-i386.c:3229 config/tc-i386.c:3475 #, c-format msgid "unimplemented segment %s in operand" msgstr "" -#: config/tc-i386.c:3210 config/tc-i386.c:3456 +#: config/tc-i386.c:3231 config/tc-i386.c:3477 #, c-format msgid "unimplemented segment type %d in operand" msgstr "" -#: config/tc-i386.c:3252 config/tc-i386.c:5392 +#: config/tc-i386.c:3273 config/tc-i386.c:5407 #, c-format msgid "expecting scale factor of 1, 2, 4, or 8: got `%s'" msgstr "" -#: config/tc-i386.c:3258 +#: config/tc-i386.c:3279 #, c-format msgid "scale factor of %d without an index register" msgstr "" #. Missing or bad expr becomes absolute 0. -#: config/tc-i386.c:3435 +#: config/tc-i386.c:3456 #, c-format msgid "missing or invalid displacement expression `%s' taken as 0" msgstr "" -#: config/tc-i386.c:3541 +#: config/tc-i386.c:3562 #, c-format msgid "`%s' is not a valid base/index expression" msgstr "" -#: config/tc-i386.c:3545 +#: config/tc-i386.c:3566 #, c-format msgid "`%s' is not a valid %s bit base/index expression" msgstr "" -#: config/tc-i386.c:3620 +#: config/tc-i386.c:3641 #, c-format msgid "bad memory operand `%s'" msgstr "" -#: config/tc-i386.c:3635 +#: config/tc-i386.c:3656 #, c-format msgid "junk `%s' after register" msgstr "" -#: config/tc-i386.c:3644 config/tc-i386.c:3759 config/tc-i386.c:3795 +#: config/tc-i386.c:3665 config/tc-i386.c:3780 config/tc-i386.c:3816 #, c-format msgid "bad register name `%s'" msgstr "" -#: config/tc-i386.c:3652 +#: config/tc-i386.c:3673 msgid "immediate operand illegal with absolute jump" msgstr "" -#: config/tc-i386.c:3674 +#: config/tc-i386.c:3695 #, c-format msgid "too many memory references for `%s'" msgstr "" -#: config/tc-i386.c:3752 +#: config/tc-i386.c:3773 #, c-format msgid "expecting `,' or `)' after index register in `%s'" msgstr "" -#: config/tc-i386.c:3774 +#: config/tc-i386.c:3795 #, c-format msgid "expecting `)' after scale factor in `%s'" msgstr "" -#: config/tc-i386.c:3781 +#: config/tc-i386.c:3802 #, c-format msgid "expecting index register or scale factor after `,'; got '%c'" msgstr "" -#: config/tc-i386.c:3788 +#: config/tc-i386.c:3809 #, c-format msgid "expecting `,' or `)' after base register in `%s'" msgstr "" #. It's not a memory operand; argh! -#: config/tc-i386.c:3829 +#: config/tc-i386.c:3850 #, c-format msgid "invalid char %s beginning operand %d `%s'" msgstr "" -#: config/tc-i386.c:4267 +#: config/tc-i386.c:4288 msgid "Bad call to md_atof ()" msgstr "" -#: config/tc-i386.c:4431 config/tc-sparc.c:548 -#, c-format -msgid "No compiled in support for %d bit object file format" +#: config/tc-i386.c:4445 +msgid "No compiled in support for x86_64" msgstr "" -#: config/tc-i386.c:4449 +#: config/tc-i386.c:4466 msgid "" " -Q ignored\n" " -V print assembler version number\n" @@ -3583,67 +3588,63 @@ msgid "" " -s ignored\n" msgstr "" -#: config/tc-i386.c:4456 +#: config/tc-i386.c:4473 msgid " -q quieten some warnings\n" msgstr "" -#: config/tc-i386.c:4475 -msgid "Unknown architecture" -msgstr "" - -#: config/tc-i386.c:4515 +#: config/tc-i386.c:4532 config/tc-s390.c:1446 msgid "GOT already in symbol table" msgstr "" -#: config/tc-i386.c:4636 +#: config/tc-i386.c:4653 #, c-format msgid "can not do %d byte relocation" msgstr "" -#: config/tc-i386.c:4697 +#: config/tc-i386.c:4713 config/tc-s390.c:1746 #, c-format msgid "cannot represent relocation type %s" msgstr "" -#: config/tc-i386.c:4994 +#: config/tc-i386.c:5009 #, c-format msgid "too many memory references for '%s'" msgstr "" -#: config/tc-i386.c:5157 +#: config/tc-i386.c:5172 #, c-format msgid "Unknown operand modifier `%s'\n" msgstr "" -#: config/tc-i386.c:5364 +#: config/tc-i386.c:5379 #, c-format msgid "`%s' is not a valid segment register" msgstr "" -#: config/tc-i386.c:5374 config/tc-i386.c:5495 +#: config/tc-i386.c:5389 config/tc-i386.c:5510 msgid "Register scaling only allowed in memory operands." msgstr "" -#: config/tc-i386.c:5405 +#: config/tc-i386.c:5420 msgid "Too many register references in memory operand.\n" msgstr "" -#: config/tc-i386.c:5474 +#: config/tc-i386.c:5489 #, c-format msgid "Syntax error. Expecting a constant. Got `%s'.\n" msgstr "" -#: config/tc-i386.c:5544 +#: config/tc-i386.c:5559 #, c-format msgid "Unrecognized token '%s'" msgstr "" -#: config/tc-i386.c:5561 +#: config/tc-i386.c:5576 #, c-format msgid "Unexpected token `%s'\n" msgstr "" -#: config/tc-i386.c:5705 +#: config/tc-i386.c:5720 #, c-format msgid "Unrecognized token `%s'\n" msgstr "" @@ -3900,106 +3901,110 @@ msgstr "" msgid "ignoring unrecognized .endian type `%s'" msgstr "" -#: config/tc-i960.c:3064 +#: config/tc-i960.c:3063 #, c-format msgid "leafproc symbol '%s' undefined" msgstr "" -#: config/tc-i960.c:3074 +#: config/tc-i960.c:3073 #, c-format msgid "Warning: making leafproc entries %s and %s both global\n" msgstr "" -#: config/tc-i960.c:3183 +#: config/tc-i960.c:3182 msgid "option --link-relax is only supported in b.out format" msgstr "" -#: config/tc-i960.c:3226 +#: config/tc-i960.c:3225 msgid "callj to difference of two symbols" msgstr "" -#: config/tc-ia64.c:4077 +#: config/tc-ia64.c:952 +msgid "Unwind directive not followed by an instruction." +msgstr "" + +#: config/tc-ia64.c:4094 msgid "Register name expected" msgstr "" -#: config/tc-ia64.c:4082 config/tc-ia64.c:4368 +#: config/tc-ia64.c:4099 config/tc-ia64.c:4385 msgid "Comma expected" msgstr "" -#: config/tc-ia64.c:4090 +#: config/tc-ia64.c:4107 msgid "Register value annotation ignored" msgstr "" -#: config/tc-ia64.c:4114 +#: config/tc-ia64.c:4131 msgid "Directive invalid within a bundle" msgstr "" -#: config/tc-ia64.c:4181 +#: config/tc-ia64.c:4198 msgid "Missing predicate relation type" msgstr "" -#: config/tc-ia64.c:4197 +#: config/tc-ia64.c:4214 msgid "Unrecognized predicate relation type" msgstr "" -#: config/tc-ia64.c:4217 config/tc-ia64.c:4242 +#: config/tc-ia64.c:4234 config/tc-ia64.c:4259 msgid "Predicate register expected" msgstr "" -#: config/tc-ia64.c:4229 +#: config/tc-ia64.c:4246 msgid "Duplicate predicate register ignored" msgstr "" -#: config/tc-ia64.c:4251 +#: config/tc-ia64.c:4268 msgid "Bad register range" msgstr "" -#: config/tc-ia64.c:4279 +#: config/tc-ia64.c:4296 msgid "Predicate source and target required" msgstr "" -#: config/tc-ia64.c:4281 config/tc-ia64.c:4293 +#: config/tc-ia64.c:4298 config/tc-ia64.c:4310 msgid "Use of p0 is not valid in this context" msgstr "" -#: config/tc-ia64.c:4288 +#: config/tc-ia64.c:4305 msgid "At least two PR arguments expected" msgstr "" -#: config/tc-ia64.c:4302 +#: config/tc-ia64.c:4319 msgid "At least one PR argument expected" msgstr "" -#: config/tc-ia64.c:4338 +#: config/tc-ia64.c:4355 #, c-format msgid "Inserting \"%s\" into entry hint table failed: %s" msgstr "" #. FIXME -- need 62-bit relocation type -#: config/tc-ia64.c:4758 +#: config/tc-ia64.c:4775 msgid "62-bit relocation not yet implemented" msgstr "" -#: config/tc-ia64.c:4820 +#: config/tc-ia64.c:4837 msgid "lower 16 bits of mask ignored" msgstr "" -#: config/tc-ia64.c:5317 +#: config/tc-ia64.c:5337 msgid "Value truncated to 62 bits" msgstr "" -#: config/tc-ia64.c:5668 +#: config/tc-ia64.c:5688 msgid "" "Additional NOP may be necessary to workaround Itanium processor A/B step " "errata" msgstr "" -#: config/tc-ia64.c:5849 +#: config/tc-ia64.c:5870 #, c-format msgid "Unrecognized option '-x%s'" msgstr "" -#: config/tc-ia64.c:5877 +#: config/tc-ia64.c:5898 msgid "" "IA-64 options:\n" " -milp32|-milp64|-mlp64|-mp64\tselect data model (default -mlp64)\n" @@ -4009,33 +4014,33 @@ msgid "" " -xdebug\t\t debug dependency violation checker\n" msgstr "" -#: config/tc-ia64.c:6147 config/tc-mips.c:1014 +#: config/tc-ia64.c:6168 config/tc-mips.c:1014 msgid "Could not set architecture and machine" msgstr "" -#: config/tc-ia64.c:6223 +#: config/tc-ia64.c:6244 msgid "Explicit stops are ignored in auto mode" msgstr "" -#: config/tc-ia64.c:6273 +#: config/tc-ia64.c:6294 msgid "Found '{' after explicit switch to automatic mode" msgstr "" -#: config/tc-ia64.c:6686 +#: config/tc-ia64.c:6707 #, c-format msgid "Unhandled dependency %s for %s (%s), note %d" msgstr "" -#: config/tc-ia64.c:7962 +#: config/tc-ia64.c:7983 #, c-format msgid "Unrecognized dependency specifier %d\n" msgstr "" -#: config/tc-ia64.c:8753 +#: config/tc-ia64.c:8774 msgid "Only the first path encountering the conflict is reported" msgstr "" -#: config/tc-ia64.c:8756 +#: config/tc-ia64.c:8777 msgid "This is the location of the conflicting usage" msgstr "" @@ -4115,82 +4120,82 @@ msgstr "" msgid " -cpu-desc provide runtime cpu description file\n" msgstr "" -#: config/tc-m32r.c:688 +#: config/tc-m32r.c:689 msgid "Instructions write to the same destination register." msgstr "" -#: config/tc-m32r.c:696 +#: config/tc-m32r.c:697 msgid "Instructions do not use parallel execution pipelines." msgstr "" -#: config/tc-m32r.c:703 +#: config/tc-m32r.c:704 msgid "Instructions share the same execution pipeline" msgstr "" -#: config/tc-m32r.c:773 config/tc-m32r.c:870 +#: config/tc-m32r.c:774 config/tc-m32r.c:871 #, c-format msgid "not a 16 bit instruction '%s'" msgstr "" -#: config/tc-m32r.c:780 config/tc-m32r.c:877 config/tc-m32r.c:1033 +#: config/tc-m32r.c:781 config/tc-m32r.c:878 config/tc-m32r.c:1034 #, c-format msgid "unknown instruction '%s'" msgstr "" -#: config/tc-m32r.c:789 config/tc-m32r.c:884 config/tc-m32r.c:1040 +#: config/tc-m32r.c:790 config/tc-m32r.c:885 config/tc-m32r.c:1041 #, c-format msgid "instruction '%s' is for the M32RX only" msgstr "" -#: config/tc-m32r.c:798 config/tc-m32r.c:893 +#: config/tc-m32r.c:799 config/tc-m32r.c:894 #, c-format msgid "instruction '%s' cannot be executed in parallel." msgstr "" -#: config/tc-m32r.c:854 config/tc-m32r.c:918 config/tc-m32r.c:1090 +#: config/tc-m32r.c:855 config/tc-m32r.c:919 config/tc-m32r.c:1091 msgid "internal error: lookup/get operands failed" msgstr "" -#: config/tc-m32r.c:903 +#: config/tc-m32r.c:904 #, c-format msgid "'%s': only the NOP instruction can be issued in parallel on the m32r" msgstr "" -#: config/tc-m32r.c:932 +#: config/tc-m32r.c:933 #, c-format msgid "" "%s: output of 1st instruction is the same as an input to 2nd instruction - " "is this intentional ?" msgstr "" -#: config/tc-m32r.c:936 +#: config/tc-m32r.c:937 #, c-format msgid "" "%s: output of 2nd instruction is the same as an input to 1st instruction - " "is this intentional ?" msgstr "" -#: config/tc-m32r.c:1250 config/tc-ppc.c:1459 config/tc-ppc.c:3681 read.c:1358 +#: config/tc-m32r.c:1251 config/tc-ppc.c:1459 config/tc-ppc.c:3681 read.c:1358 msgid "Expected comma after symbol-name: rest of line ignored." msgstr "" -#: config/tc-m32r.c:1260 +#: config/tc-m32r.c:1261 #, c-format msgid ".SCOMMon length (%ld.) <0! Ignored." msgstr "" -#: config/tc-m32r.c:1274 config/tc-ppc.c:1481 config/tc-ppc.c:2392 +#: config/tc-m32r.c:1275 config/tc-ppc.c:1481 config/tc-ppc.c:2392 #: config/tc-ppc.c:3705 msgid "ignoring bad alignment" msgstr "" -#: config/tc-m32r.c:1301 config/tc-ppc.c:1492 config/tc-ppc.c:3717 read.c:1382 +#: config/tc-m32r.c:1302 config/tc-ppc.c:1492 config/tc-ppc.c:3717 read.c:1382 #: read.c:2108 #, c-format msgid "Ignoring attempt to re-define symbol `%s'." msgstr "" -#: config/tc-m32r.c:1310 +#: config/tc-m32r.c:1311 #, c-format msgid "Length of .scomm \"%s\" is already %ld. Not changed to %ld." msgstr "" @@ -4199,7 +4204,7 @@ msgstr "" msgid "Unmatched high/shigh reloc" msgstr "" -#: config/tc-m68hc11.c:305 +#: config/tc-m68hc11.c:308 #, c-format msgid "" "Motorola 68HC11/68HC12 options:\n" @@ -4215,55 +4220,55 @@ msgid "" " (used for testing)\n" msgstr "" -#: config/tc-m68hc11.c:346 +#: config/tc-m68hc11.c:349 #, c-format msgid "Default target `%s' is not supported." msgstr "" #. Dump the opcode statistics table. -#: config/tc-m68hc11.c:365 +#: config/tc-m68hc11.c:368 msgid "Name # Modes Min ops Max ops Modes mask # Used\n" msgstr "" -#: config/tc-m68hc11.c:415 +#: config/tc-m68hc11.c:418 #, c-format msgid "Option `%s' is not recognized." msgstr "" -#: config/tc-m68hc11.c:636 +#: config/tc-m68hc11.c:639 msgid "#" msgstr "" -#: config/tc-m68hc11.c:645 +#: config/tc-m68hc11.c:648 msgid "#" msgstr "" -#: config/tc-m68hc11.c:654 config/tc-m68hc11.c:663 +#: config/tc-m68hc11.c:657 config/tc-m68hc11.c:666 msgid ",X" msgstr "" -#: config/tc-m68hc11.c:681 +#: config/tc-m68hc11.c:684 msgid "*" msgstr "" -#: config/tc-m68hc11.c:693 +#: config/tc-m68hc11.c:696 msgid "#" msgstr "" -#: config/tc-m68hc11.c:703 +#: config/tc-m68hc11.c:706 #, c-format msgid "symbol%d" msgstr "" -#: config/tc-m68hc11.c:705 +#: config/tc-m68hc11.c:708 msgid "" msgstr "" -#: config/tc-m68hc11.c:724 +#: config/tc-m68hc11.c:727 msgid "