From 4f0ef2d88b484966e5203cb6258aa1195be49688 Mon Sep 17 00:00:00 2001 From: Carlos O'Donell Date: Wed, 7 Jun 2006 22:33:16 +0000 Subject: 2006-06-07 Carlos O'Donell Sync from gcc: 2006-06-06 David Ayers PR libobjc/13946 * Makefile.def: Add dependencies for libobjc which boehm-gc. * Makefile.in: Regenerate. * configure.in: Add --enable-objc-gc at toplevel and have it enable boehm-gc for Objective-C. Remove target-boehm-gc from libgcj. Add target-boehm-gc to target_libraries. Add target-boehm-gc to noconfigdirs where ${libgcj} is specified. Assert that boehm-gc is supported when requested for Objective-C. Only build boehm-gc if needed either for Java or Objective-C. * configure: Regenerate. 2006-06-05 Paolo Bonzini PR 27674 * Makefile.tpl (configure-[+prefix+][+module+], all-[+prefix+][+module+]): Depend on stage_current if bootstrapping. Remove rule to unstage bootstrapped modules. (stage_current): New. * Makefile.in: Regenerate. 2006-05-20 John David Anglin Andreas Tobler * configure.in: Enable libgcj for hppa*-hp-hpux11*. * configure: Rebuilt. Revert 2006-01-31 Richard Guenther Paolo Bonzini * Makefile.def (target_modules): Add libgcc-math target module. * configure.in (target_libraries): Add libgcc-math target library. (--enable-libgcc-math): New configure switch. * Makefile.in: Re-generate. * configure: Re-generate. --- configure | 545 +++++++++++++++++++++++++++++++------------------------------- 1 file changed, 271 insertions(+), 274 deletions(-) (limited to 'configure') diff --git a/configure b/configure index 18d4115..e85f028 100755 --- a/configure +++ b/configure @@ -16,8 +16,6 @@ ac_help="$ac_help ac_help="$ac_help --enable-libssp Builds libssp directory" ac_help="$ac_help - --enable-libgcc-math Builds libgcc-math directory" -ac_help="$ac_help --with-mpfr-dir=PATH Specify source directory for MPFR library" ac_help="$ac_help --with-mpfr=PATH Specify directory for installed MPFR library" @@ -26,6 +24,9 @@ ac_help="$ac_help ac_help="$ac_help --with-gmp=PATH Specify directory for installed GMP library" ac_help="$ac_help + --enable-objc-gc enable the use of Boehm's garbage collector with + the GNU Objective-C runtime." +ac_help="$ac_help --with-build-sysroot=sysroot use sysroot as the system root during the build" ac_help="$ac_help @@ -607,7 +608,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:611: checking host system type" >&5 +echo "configure:612: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -628,7 +629,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:632: checking target system type" >&5 +echo "configure:633: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -646,7 +647,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:650: checking build system type" >&5 +echo "configure:651: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -701,7 +702,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:705: checking for a BSD compatible install" >&5 +echo "configure:706: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -754,7 +755,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether ln works""... $ac_c" 1>&6 -echo "configure:758: checking whether ln works" >&5 +echo "configure:759: checking whether ln works" >&5 if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -778,7 +779,7 @@ else fi echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:782: checking whether ln -s works" >&5 +echo "configure:783: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -903,7 +904,6 @@ host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc sid sim gdb # libgcj represents the runtime libraries only used by gcj. libgcj="target-libffi \ - target-boehm-gc \ target-zlib \ target-qthreads \ target-libjava" @@ -917,8 +917,8 @@ target_libraries="target-libiberty \ target-libstdc++-v3 \ target-libmudflap \ target-libssp \ - target-libgcc-math \ target-libgfortran \ + target-boehm-gc \ ${libgcj} \ target-libobjc \ target-libada \ @@ -1116,23 +1116,6 @@ else fi -# Set the default so we build libgcc-math for ix86 and x86_64 -# Check whether --enable-libgcc-math or --disable-libgcc-math was given. -if test "${enable_libgcc_math+set}" = set; then - enableval="$enable_libgcc_math" - : -else - -case "${target}" in - i?86-* | x86_64-* ) - enable_libgcc_math=yes ;; - *) - enable_libgcc_math=no ;; -esac - -fi - - # Save it here so that, even in case of --enable-libgcj, if the Java # front-end isn't enabled, we still get libgcj disabled. libgcj_saved=$libgcj @@ -1187,7 +1170,7 @@ fi case "${target}" in *-*-chorusos) - noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-newlib target-libgloss target-boehm-gc ${libgcj}" ;; powerpc-*-darwin*) noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof" @@ -1196,10 +1179,10 @@ case "${target}" in *-*-darwin*) noconfigdirs="$noconfigdirs ld gas gdb gprof" noconfigdirs="$noconfigdirs sim target-rda" - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*) - noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-newlib target-libgloss target-boehm-gc ${libgcj}" ;; *-*-freebsd*) noconfigdirs="$noconfigdirs target-newlib target-libgloss" @@ -1213,13 +1196,13 @@ case "${target}" in i*86-*-*) ;; alpha*-*-*) ;; *) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; esac ;; *-*-kaos*) # Remove unsupported stuff on all kaOS configurations. - skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-librx" + skipdirs="target-libiberty target-boehm-gc ${libgcj} target-libstdc++-v3 target-librx" skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf" skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib" noconfigdirs="$noconfigdirs target-libgloss" @@ -1233,25 +1216,25 @@ case "${target}" in i*86-*-netbsdelf*) ;; arm*-*-netbsdelf*) ;; *) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; esac ;; *-*-netware*) - noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap" + noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss target-boehm-gc ${libgcj} target-libmudflap" ;; *-*-rtems*) - noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}" ;; # The tpf target doesn't support gdb yet. *-*-tpf*) - noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl" + noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-boehm-gc ${libgcj} target-libmudflap gdb tcl tk libgui itcl" ;; *-*-uclinux*) - noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}" + noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda target-boehm-gc ${libgcj}" ;; *-*-vxworks*) - noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}" + noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 target-boehm-gc ${libgcj}" ;; alpha*-dec-osf*) # ld works, but does not support shared libraries. @@ -1260,7 +1243,7 @@ case "${target}" in noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss" ;; alpha*-*-*vms*) - noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss target-boehm-gc ${libgcj}" ;; alpha*-*-linux*) # newlib is not 64 bit ready @@ -1268,16 +1251,16 @@ case "${target}" in ;; alpha*-*-*) # newlib is not 64 bit ready - noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-newlib target-libgloss target-boehm-gc ${libgcj}" ;; am33_2.0-*-linux*) - noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj} target-newlib target-libgloss" ;; sh-*-linux*) - noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj} target-newlib target-libgloss" ;; sh*-*-pe|mips*-*-pe|*arm-wince-pe) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" noconfigdirs="$noconfigdirs target-examples" noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr" noconfigdirs="$noconfigdirs tcl tk itcl libgui sim" @@ -1292,12 +1275,12 @@ case "${target}" in esac ;; arc-*-*) - noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}" ;; arm-semi-aof ) ;; arm-*-coff | strongarm-*-coff | xscale-*-coff) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* ) noconfigdirs="$noconfigdirs target-libffi target-qthreads" @@ -1307,25 +1290,25 @@ case "${target}" in noconfigdirs="$noconfigdirs target-libjava target-libobjc" ;; arm*-*-symbianelf*) - noconfigdirs="$noconfigdirs ${libgcj} target-libiberty" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj} target-libiberty" ;; arm-*-pe*) - noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}" ;; thumb-*-coff) - noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}" ;; thumb-*-elf) - noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}" ;; thumb-*-pe) - noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}" ;; arm-*-riscix*) - noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs ld target-libgloss target-boehm-gc ${libgcj}" ;; avr-*-*) - noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}" + noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 target-boehm-gc ${libgcj}" ;; bfin-*-*) noconfigdirs="$noconfigdirs target-libgloss gdb" @@ -1334,10 +1317,10 @@ case "${target}" in fi ;; c4x-*-* | tic4x-*-*) - noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss target-boehm-gc ${libgcj}" ;; c54x*-*-* | tic54x-*-*) - noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib" + noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss target-boehm-gc ${libgcj} gcc gdb newlib" ;; cris-*-* | crisv32-*-*) unsupported_languages="$unsupported_languages java" @@ -1352,29 +1335,29 @@ case "${target}" in noconfigdirs="$noconfigdirs target-newlib target-libgloss";; *) unsupported_languages="$unsupported_languages fortran" - noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";; + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj} target-newlib target-libgloss";; esac ;; crx-*-*) - noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}" + noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap target-boehm-gc ${libgcj}" ;; d10v-*-*) - noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss target-boehm-gc ${libgcj}" ;; d30v-*-*) - noconfigdirs="$noconfigdirs ${libgcj} gdb" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj} gdb" ;; fr30-*-elf*) - noconfigdirs="$noconfigdirs ${libgcj} gdb" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj} gdb" ;; frv-*-*) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; h8300*-*-*) - noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}" ;; h8500-*-*) - noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss target-boehm-gc ${libgcj}" ;; hppa1.1-*-osf* | hppa1.1-*-bsd* ) ;; @@ -1390,15 +1373,18 @@ case "${target}" in hppa*-*-lites* | \ hppa*-*-openbsd* | \ hppa*64*-*-*) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" + ;; + hppa*-hp-hpux11*) + noconfigdirs="$noconfigdirs ld shellutils" ;; hppa*-*-*) # According to Alexandre Oliva , libjava won't # build on HP-UX 10.20. - noconfigdirs="$noconfigdirs ld shellutils ${libgcj}" + noconfigdirs="$noconfigdirs ld shellutils target-boehm-gc ${libgcj}" ;; i960-*-*) - noconfigdirs="$noconfigdirs ${libgcj} gdb" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj} gdb" ;; ia64*-*-elf*) # No gdb support yet. @@ -1406,19 +1392,19 @@ case "${target}" in ;; ia64*-**-hpux*) # No gdb or ld support yet. - noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj} readline mmalloc libgui itcl gdb ld" ;; i370-*-opened*) ;; i[3456789]86-*-coff | i[3456789]86-*-elf) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; i[3456789]86-*-linux*) # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's # not build java stuff by default. case "${target}" in *-*-*libc1*) - noconfigdirs="$noconfigdirs ${libgcj}";; + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}";; esac # This section makes it possible to build newlib natively on linux. @@ -1434,7 +1420,7 @@ case "${target}" in ;; i[3456789]86-*-mingw32*) target_configdirs="$target_configdirs target-mingw" - noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs expect target-libgloss target-boehm-gc ${libgcj}" # Can't build gdb for mingw32 if not native. case "${host}" in @@ -1445,7 +1431,7 @@ case "${target}" in ;; *-*-cygwin*) target_configdirs="$target_configdirs target-libtermcap target-winsup" - noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-gperf target-libgloss target-boehm-gc ${libgcj}" # always build newlib if winsup directory is present. if test -d "$srcdir/winsup"; then skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` @@ -1464,39 +1450,39 @@ case "${target}" in i[3456789]86-*-uwin* | i[3456789]86-*-interix* ) ;; i[3456789]86-*-pe) - noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss target-boehm-gc ${libgcj}" ;; i[3456789]86-*-sco3.2v5*) # The linker does not yet know about weak symbols in COFF, # and is not configured to handle mixed ELF and COFF. - noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs ld target-libgloss target-boehm-gc ${libgcj}" ;; i[3456789]86-*-sco*) - noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs gprof target-libgloss target-boehm-gc ${libgcj}" ;; i[3456789]86-*-solaris2*) noconfigdirs="$noconfigdirs target-libgloss" ;; i[3456789]86-*-sysv4*) - noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}" ;; i[3456789]86-*-beos*) - noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss target-boehm-gc ${libgcj}" ;; i[3456789]86-*-rdos*) noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss" ;; m32r-*-*) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*) - noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}" + noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 target-boehm-gc ${libgcj}" ;; m68k-*-elf*) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; m68k-*-coff*) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; mcore-*-pe*) # The EPOC C++ environment does not support exceptions or rtti, @@ -1508,78 +1494,78 @@ case "${target}" in unsupported_languages="$unsupported_languages fortran java" ;; mn10200-*-*) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; mn10300-*-*) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; mt-*-*) noconfigdirs="$noconfigdirs sim" ;; powerpc-*-aix*) # copied from rs6000-*-* entry - noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}" + noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-boehm-gc ${libgcj}" ;; powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe) target_configdirs="$target_configdirs target-winsup" - noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}" + noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv target-boehm-gc ${libgcj}" # always build newlib. skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;; # This is temporary until we can link against shared libraries powerpcle-*-solaris*) - noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}" + noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv target-boehm-gc ${libgcj}" ;; powerpc-*-beos*) - noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss target-boehm-gc ${libgcj}" ;; powerpc-*-eabi) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* ) ;; rs6000-*-lynxos*) - noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}" + noconfigdirs="$noconfigdirs target-newlib gprof target-boehm-gc ${libgcj}" ;; rs6000-*-aix*) - noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}" + noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-boehm-gc ${libgcj}" ;; rs6000-*-*) - noconfigdirs="$noconfigdirs gprof ${libgcj}" + noconfigdirs="$noconfigdirs gprof target-boehm-gc ${libgcj}" ;; m68k-apollo-*) - noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss target-boehm-gc ${libgcj}" ;; mips*-*-irix5*) - noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs gprof target-libgloss target-boehm-gc ${libgcj}" ;; mips*-*-irix6*) # Linking libjava exceeds command-line length limits on at least # IRIX 6.2, but not on IRIX 6.5. # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham # - noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs gprof target-libgloss target-boehm-gc ${libgcj}" ;; mips*-dec-bsd*) - noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs gprof target-libgloss target-boehm-gc ${libgcj}" ;; mips*-*-bsd*) - noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs gprof target-libgloss target-boehm-gc ${libgcj}" ;; mipstx39-*-*) - noconfigdirs="$noconfigdirs gprof ${libgcj}" # same as generic mips + noconfigdirs="$noconfigdirs gprof target-boehm-gc ${libgcj}" # same as generic mips ;; mips64*-*-linux*) - noconfigdirs="$noconfigdirs target-newlib ${libgcj}" + noconfigdirs="$noconfigdirs target-newlib target-boehm-gc ${libgcj}" ;; mips*-*-linux*) noconfigdirs="$noconfigdirs target-newlib target-libgloss" ;; mips*-*-*) - noconfigdirs="$noconfigdirs gprof ${libgcj}" + noconfigdirs="$noconfigdirs gprof target-boehm-gc ${libgcj}" ;; romp-*-*) - noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss target-boehm-gc ${libgcj}" ;; sh-*-* | sh64-*-*) case "${host}" in @@ -1588,19 +1574,19 @@ case "${target}" in i[3456789]86-*-msdosdjgpp*) ;; # don't add gprof back in *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;; esac - noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}" ;; sparc-*-elf*) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; sparc64-*-elf*) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; sparclite-*-*) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; sparc-*-sunos4*) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" if test x${is_cross_compiler} != xno ; then noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss" else @@ -1608,42 +1594,42 @@ case "${target}" in fi ;; sparc-*-solaris2.[0-6] | sparc-*-solaris2.[0-6].*) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*) ;; v810-*-*) - noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss target-boehm-gc ${libgcj}" ;; v850-*-*) - noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}" ;; v850e-*-*) - noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}" ;; v850ea-*-*) - noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-libgloss target-boehm-gc ${libgcj}" ;; vax-*-vms) - noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss target-boehm-gc ${libgcj}" ;; vax-*-*) - noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-newlib target-libgloss target-boehm-gc ${libgcj}" ;; xtensa-*-*) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; ip2k-*-*) - noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}" + noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 target-boehm-gc ${libgcj}" ;; *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu) noconfigdirs="$noconfigdirs target-newlib target-libgloss" ;; *-*-lynxos*) - noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-newlib target-libgloss target-boehm-gc ${libgcj}" ;; *-*-*) - noconfigdirs="$noconfigdirs ${libgcj}" + noconfigdirs="$noconfigdirs target-boehm-gc ${libgcj}" ;; esac @@ -1860,7 +1846,7 @@ else # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1864: checking for $ac_word" >&5 +echo "configure:1850: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1890,7 +1876,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1894: checking for $ac_word" >&5 +echo "configure:1880: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1941,7 +1927,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1945: checking for $ac_word" >&5 +echo "configure:1931: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1973,7 +1959,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1977: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1963: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1984,12 +1970,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1988 "configure" +#line 1974 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1993: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1979: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -2015,12 +2001,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:2019: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:2005: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:2024: checking whether we are using GNU C" >&5 +echo "configure:2010: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2029,7 +2015,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2033: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2019: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -2048,7 +2034,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:2052: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:2038: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2115,7 +2101,7 @@ fi # Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args. set dummy ${ac_tool_prefix}gnatbind; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2119: checking for $ac_word" >&5 +echo "configure:2105: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2147,7 +2133,7 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "gnatbind", so it can be a program name with args. set dummy gnatbind; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2151: checking for $ac_word" >&5 +echo "configure:2137: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2180,7 +2166,7 @@ fi fi echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6 -echo "configure:2184: checking whether compiler driver understands Ada" >&5 +echo "configure:2170: checking whether compiler driver understands Ada" >&5 if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2212,7 +2198,7 @@ else fi echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6 -echo "configure:2216: checking how to compare bootstrapped objects" >&5 +echo "configure:2202: checking how to compare bootstrapped objects" >&5 if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2310,9 +2296,9 @@ saved_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $gmpinc" # Check GMP actually works echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6 -echo "configure:2314: checking for correct version of gmp.h" >&5 +echo "configure:2300: checking for correct version of gmp.h" >&5 cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2313: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* echo "$ac_t""yes" 1>&6 else @@ -2336,12 +2322,12 @@ rm -f conftest* if test x"$have_gmp" = xyes; then echo $ac_n "checking for MPFR""... $ac_c" 1>&6 -echo "configure:2340: checking for MPFR" >&5 +echo "configure:2326: checking for MPFR" >&5 saved_LIBS="$LIBS" LIBS="$LIBS $gmplibs" cat > conftest.$ac_ext < #include @@ -2349,7 +2335,7 @@ int main() { mpfr_t n; mpfr_init(n); ; return 0; } EOF -if { (eval echo configure:2353: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2339: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* echo "$ac_t""yes" 1>&6 else @@ -2541,6 +2527,36 @@ for dir in $configdirs $build_configdirs $target_configdirs ; do fi done +# Check for Boehm's garbage collector +# Check whether --enable-objc-gc or --disable-objc-gc was given. +if test "${enable_objc_gc+set}" = set; then + enableval="$enable_objc_gc" + case ,${enable_languages},:${enable_objc_gc}:${noconfigdirs} in + *,objc,*:*:yes:*target-boehm-gc*) + { echo "configure: error: Boehm's garbage collector was requested yet not supported in this configuration" 1>&2; exit 1; } + ;; +esac +fi + + +# Make sure we only build Boehm's garbage collector if required. +case ,${enable_languages},:${enable_libgcj}:${enable_objc_gc} in + *,objc,*:*:yes) + # Keep target-boehm-gc if requested for Objective-C. + ;; + *,java,*:no:*) + # Remove target-boehm-gc if libgcj has been disabled explicitly. + noconfigdirs="$noconfigdirs target-boehm-gc" + ;; + *,java,*:*:*) + # Keep target-boehm-gc by default for Java. + ;; + *) + # Otherwise remove target-boehm-gc. + noconfigdirs="$noconfigdirs target-boehm-gc" + ;; +esac + # Remove the entries in $skipdirs and $noconfigdirs from $configdirs, # $build_configdirs and $target_configdirs. # If we have the source for $noconfigdirs entries, add them to $notsupp. @@ -3414,7 +3430,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3418: checking for $ac_word" >&5 +echo "configure:3434: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3454,7 +3470,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3458: checking for $ac_word" >&5 +echo "configure:3474: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3493,7 +3509,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3497: checking for $ac_word" >&5 +echo "configure:3513: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3532,7 +3548,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3536: checking for $ac_word" >&5 +echo "configure:3552: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3572,7 +3588,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3576: checking for $ac_word" >&5 +echo "configure:3592: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3611,7 +3627,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3615: checking for $ac_word" >&5 +echo "configure:3631: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3664,7 +3680,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3668: checking for $ac_word" >&5 +echo "configure:3684: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3705,7 +3721,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3709: checking for $ac_word" >&5 +echo "configure:3725: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3753,7 +3769,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias- # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3757: checking for $ac_word" >&5 +echo "configure:3773: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3784,7 +3800,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3788: checking for $ac_word" >&5 +echo "configure:3804: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3828,7 +3844,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3832: checking for $ac_word" >&5 +echo "configure:3848: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3859,7 +3875,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3863: checking for $ac_word" >&5 +echo "configure:3879: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3903,7 +3919,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3907: checking for $ac_word" >&5 +echo "configure:3923: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3934,7 +3950,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3938: checking for $ac_word" >&5 +echo "configure:3954: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3978,7 +3994,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3982: checking for $ac_word" >&5 +echo "configure:3998: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4009,7 +4025,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4013: checking for $ac_word" >&5 +echo "configure:4029: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4053,7 +4069,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4057: checking for $ac_word" >&5 +echo "configure:4073: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4084,7 +4100,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4088: checking for $ac_word" >&5 +echo "configure:4104: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4128,7 +4144,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4132: checking for $ac_word" >&5 +echo "configure:4148: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4159,7 +4175,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4163: checking for $ac_word" >&5 +echo "configure:4179: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4203,7 +4219,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4207: checking for $ac_word" >&5 +echo "configure:4223: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4234,7 +4250,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4238: checking for $ac_word" >&5 +echo "configure:4254: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4273,7 +4289,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4277: checking for $ac_word" >&5 +echo "configure:4293: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4304,7 +4320,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4308: checking for $ac_word" >&5 +echo "configure:4324: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4343,7 +4359,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4347: checking for $ac_word" >&5 +echo "configure:4363: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4374,7 +4390,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4378: checking for $ac_word" >&5 +echo "configure:4394: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4418,7 +4434,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4422: checking for $ac_word" >&5 +echo "configure:4438: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4449,7 +4465,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4453: checking for $ac_word" >&5 +echo "configure:4469: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4493,7 +4509,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4497: checking for $ac_word" >&5 +echo "configure:4513: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4524,7 +4540,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4528: checking for $ac_word" >&5 +echo "configure:4544: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4588,7 +4604,7 @@ fi if test -n "$with_build_time_tools"; then for ncn_progname in cc gcc; do echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:4592: checking for ${ncn_progname} in $with_build_time_tools" >&5 +echo "configure:4608: checking for ${ncn_progname} in $with_build_time_tools" >&5 if test -x $with_build_time_tools/${ncn_progname}; then ac_cv_prog_CC_FOR_TARGET=$with_build_time_tools/${ncn_progname} echo "$ac_t""yes" 1>&6 @@ -4605,7 +4621,7 @@ if test -z "$ac_cv_prog_CC_FOR_TARGET"; then # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4609: checking for $ac_word" >&5 +echo "configure:4625: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4636,7 +4652,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4640: checking for $ac_word" >&5 +echo "configure:4656: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4679,7 +4695,7 @@ fi if test -n "$with_build_time_tools"; then for ncn_progname in c++ g++ cxx gxx; do echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:4683: checking for ${ncn_progname} in $with_build_time_tools" >&5 +echo "configure:4699: checking for ${ncn_progname} in $with_build_time_tools" >&5 if test -x $with_build_time_tools/${ncn_progname}; then ac_cv_prog_CXX_FOR_TARGET=$with_build_time_tools/${ncn_progname} echo "$ac_t""yes" 1>&6 @@ -4696,7 +4712,7 @@ if test -z "$ac_cv_prog_CXX_FOR_TARGET"; then # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4700: checking for $ac_word" >&5 +echo "configure:4716: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4727,7 +4743,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4731: checking for $ac_word" >&5 +echo "configure:4747: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4770,7 +4786,7 @@ fi if test -n "$with_build_time_tools"; then for ncn_progname in gcc; do echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:4774: checking for ${ncn_progname} in $with_build_time_tools" >&5 +echo "configure:4790: checking for ${ncn_progname} in $with_build_time_tools" >&5 if test -x $with_build_time_tools/${ncn_progname}; then ac_cv_prog_GCC_FOR_TARGET=$with_build_time_tools/${ncn_progname} echo "$ac_t""yes" 1>&6 @@ -4787,7 +4803,7 @@ if test -z "$ac_cv_prog_GCC_FOR_TARGET"; then # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4791: checking for $ac_word" >&5 +echo "configure:4807: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4818,7 +4834,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4822: checking for $ac_word" >&5 +echo "configure:4838: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4856,7 +4872,7 @@ fi if test -n "$with_build_time_tools"; then for ncn_progname in gcj; do echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:4860: checking for ${ncn_progname} in $with_build_time_tools" >&5 +echo "configure:4876: checking for ${ncn_progname} in $with_build_time_tools" >&5 if test -x $with_build_time_tools/${ncn_progname}; then ac_cv_prog_GCJ_FOR_TARGET=$with_build_time_tools/${ncn_progname} echo "$ac_t""yes" 1>&6 @@ -4873,7 +4889,7 @@ if test -z "$ac_cv_prog_GCJ_FOR_TARGET"; then # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4877: checking for $ac_word" >&5 +echo "configure:4893: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4904,7 +4920,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4908: checking for $ac_word" >&5 +echo "configure:4924: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4947,7 +4963,7 @@ fi if test -n "$with_build_time_tools"; then for ncn_progname in gfortran; do echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:4951: checking for ${ncn_progname} in $with_build_time_tools" >&5 +echo "configure:4967: checking for ${ncn_progname} in $with_build_time_tools" >&5 if test -x $with_build_time_tools/${ncn_progname}; then ac_cv_prog_GFORTRAN_FOR_TARGET=$with_build_time_tools/${ncn_progname} echo "$ac_t""yes" 1>&6 @@ -4964,7 +4980,7 @@ if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET"; then # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4968: checking for $ac_word" >&5 +echo "configure:4984: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4995,7 +5011,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4999: checking for $ac_word" >&5 +echo "configure:5015: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5102,7 +5118,7 @@ rm conftest.c if test -z "$ac_cv_path_AR_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then echo $ac_n "checking for ar in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:5106: checking for ar in $with_build_time_tools" >&5 +echo "configure:5122: checking for ar in $with_build_time_tools" >&5 if test -x $with_build_time_tools/ar; then AR_FOR_TARGET=`cd $with_build_time_tools && pwd`/ar ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET @@ -5120,7 +5136,7 @@ if test -z "$ac_cv_path_AR_FOR_TARGET" ; then # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5124: checking for $ac_word" >&5 +echo "configure:5140: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5157,7 +5173,7 @@ if test -z "$ac_cv_path_AR_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then for ncn_progname in ar; do echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:5161: checking for ${ncn_progname} in $with_build_time_tools" >&5 +echo "configure:5177: checking for ${ncn_progname} in $with_build_time_tools" >&5 if test -x $with_build_time_tools/${ncn_progname}; then ac_cv_prog_AR_FOR_TARGET=$with_build_time_tools/${ncn_progname} echo "$ac_t""yes" 1>&6 @@ -5174,7 +5190,7 @@ if test -z "$ac_cv_prog_AR_FOR_TARGET"; then # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5178: checking for $ac_word" >&5 +echo "configure:5194: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5205,7 +5221,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5209: checking for $ac_word" >&5 +echo "configure:5225: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5255,7 +5271,7 @@ fi if test -z "$ac_cv_path_AS_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then echo $ac_n "checking for as in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:5259: checking for as in $with_build_time_tools" >&5 +echo "configure:5275: checking for as in $with_build_time_tools" >&5 if test -x $with_build_time_tools/as; then AS_FOR_TARGET=`cd $with_build_time_tools && pwd`/as ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET @@ -5273,7 +5289,7 @@ if test -z "$ac_cv_path_AS_FOR_TARGET" ; then # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5277: checking for $ac_word" >&5 +echo "configure:5293: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5310,7 +5326,7 @@ if test -z "$ac_cv_path_AS_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then for ncn_progname in as; do echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:5314: checking for ${ncn_progname} in $with_build_time_tools" >&5 +echo "configure:5330: checking for ${ncn_progname} in $with_build_time_tools" >&5 if test -x $with_build_time_tools/${ncn_progname}; then ac_cv_prog_AS_FOR_TARGET=$with_build_time_tools/${ncn_progname} echo "$ac_t""yes" 1>&6 @@ -5327,7 +5343,7 @@ if test -z "$ac_cv_prog_AS_FOR_TARGET"; then # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5331: checking for $ac_word" >&5 +echo "configure:5347: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5358,7 +5374,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5362: checking for $ac_word" >&5 +echo "configure:5378: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5408,7 +5424,7 @@ fi if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then echo $ac_n "checking for dlltool in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:5412: checking for dlltool in $with_build_time_tools" >&5 +echo "configure:5428: checking for dlltool in $with_build_time_tools" >&5 if test -x $with_build_time_tools/dlltool; then DLLTOOL_FOR_TARGET=`cd $with_build_time_tools && pwd`/dlltool ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET @@ -5426,7 +5442,7 @@ if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5430: checking for $ac_word" >&5 +echo "configure:5446: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5463,7 +5479,7 @@ if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then for ncn_progname in dlltool; do echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:5467: checking for ${ncn_progname} in $with_build_time_tools" >&5 +echo "configure:5483: checking for ${ncn_progname} in $with_build_time_tools" >&5 if test -x $with_build_time_tools/${ncn_progname}; then ac_cv_prog_DLLTOOL_FOR_TARGET=$with_build_time_tools/${ncn_progname} echo "$ac_t""yes" 1>&6 @@ -5480,7 +5496,7 @@ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET"; then # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5484: checking for $ac_word" >&5 +echo "configure:5500: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5511,7 +5527,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5515: checking for $ac_word" >&5 +echo "configure:5531: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5561,7 +5577,7 @@ fi if test -z "$ac_cv_path_LD_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then echo $ac_n "checking for ld in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:5565: checking for ld in $with_build_time_tools" >&5 +echo "configure:5581: checking for ld in $with_build_time_tools" >&5 if test -x $with_build_time_tools/ld; then LD_FOR_TARGET=`cd $with_build_time_tools && pwd`/ld ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET @@ -5579,7 +5595,7 @@ if test -z "$ac_cv_path_LD_FOR_TARGET" ; then # Extract the first word of "ld", so it can be a program name with args. set dummy ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5583: checking for $ac_word" >&5 +echo "configure:5599: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5616,7 +5632,7 @@ if test -z "$ac_cv_path_LD_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then for ncn_progname in ld; do echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:5620: checking for ${ncn_progname} in $with_build_time_tools" >&5 +echo "configure:5636: checking for ${ncn_progname} in $with_build_time_tools" >&5 if test -x $with_build_time_tools/${ncn_progname}; then ac_cv_prog_LD_FOR_TARGET=$with_build_time_tools/${ncn_progname} echo "$ac_t""yes" 1>&6 @@ -5633,7 +5649,7 @@ if test -z "$ac_cv_prog_LD_FOR_TARGET"; then # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5637: checking for $ac_word" >&5 +echo "configure:5653: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5664,7 +5680,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5668: checking for $ac_word" >&5 +echo "configure:5684: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5714,7 +5730,7 @@ fi if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then echo $ac_n "checking for lipo in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:5718: checking for lipo in $with_build_time_tools" >&5 +echo "configure:5734: checking for lipo in $with_build_time_tools" >&5 if test -x $with_build_time_tools/lipo; then LIPO_FOR_TARGET=`cd $with_build_time_tools && pwd`/lipo ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET @@ -5732,7 +5748,7 @@ if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then # Extract the first word of "lipo", so it can be a program name with args. set dummy lipo; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5736: checking for $ac_word" >&5 +echo "configure:5752: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_LIPO_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5769,7 +5785,7 @@ if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then for ncn_progname in lipo; do echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:5773: checking for ${ncn_progname} in $with_build_time_tools" >&5 +echo "configure:5789: checking for ${ncn_progname} in $with_build_time_tools" >&5 if test -x $with_build_time_tools/${ncn_progname}; then ac_cv_prog_LIPO_FOR_TARGET=$with_build_time_tools/${ncn_progname} echo "$ac_t""yes" 1>&6 @@ -5786,7 +5802,7 @@ if test -z "$ac_cv_prog_LIPO_FOR_TARGET"; then # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5790: checking for $ac_word" >&5 +echo "configure:5806: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5817,7 +5833,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5821: checking for $ac_word" >&5 +echo "configure:5837: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5867,7 +5883,7 @@ fi if test -z "$ac_cv_path_NM_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then echo $ac_n "checking for nm in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:5871: checking for nm in $with_build_time_tools" >&5 +echo "configure:5887: checking for nm in $with_build_time_tools" >&5 if test -x $with_build_time_tools/nm; then NM_FOR_TARGET=`cd $with_build_time_tools && pwd`/nm ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET @@ -5885,7 +5901,7 @@ if test -z "$ac_cv_path_NM_FOR_TARGET" ; then # Extract the first word of "nm", so it can be a program name with args. set dummy nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5889: checking for $ac_word" >&5 +echo "configure:5905: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5922,7 +5938,7 @@ if test -z "$ac_cv_path_NM_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then for ncn_progname in nm; do echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:5926: checking for ${ncn_progname} in $with_build_time_tools" >&5 +echo "configure:5942: checking for ${ncn_progname} in $with_build_time_tools" >&5 if test -x $with_build_time_tools/${ncn_progname}; then ac_cv_prog_NM_FOR_TARGET=$with_build_time_tools/${ncn_progname} echo "$ac_t""yes" 1>&6 @@ -5939,7 +5955,7 @@ if test -z "$ac_cv_prog_NM_FOR_TARGET"; then # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5943: checking for $ac_word" >&5 +echo "configure:5959: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5970,7 +5986,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5974: checking for $ac_word" >&5 +echo "configure:5990: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -6020,7 +6036,7 @@ fi if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then echo $ac_n "checking for objdump in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:6024: checking for objdump in $with_build_time_tools" >&5 +echo "configure:6040: checking for objdump in $with_build_time_tools" >&5 if test -x $with_build_time_tools/objdump; then OBJDUMP_FOR_TARGET=`cd $with_build_time_tools && pwd`/objdump ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET @@ -6038,7 +6054,7 @@ if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:6042: checking for $ac_word" >&5 +echo "configure:6058: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -6075,7 +6091,7 @@ if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then for ncn_progname in objdump; do echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:6079: checking for ${ncn_progname} in $with_build_time_tools" >&5 +echo "configure:6095: checking for ${ncn_progname} in $with_build_time_tools" >&5 if test -x $with_build_time_tools/${ncn_progname}; then ac_cv_prog_OBJDUMP_FOR_TARGET=$with_build_time_tools/${ncn_progname} echo "$ac_t""yes" 1>&6 @@ -6092,7 +6108,7 @@ if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET"; then # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:6096: checking for $ac_word" >&5 +echo "configure:6112: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -6123,7 +6139,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:6127: checking for $ac_word" >&5 +echo "configure:6143: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -6173,7 +6189,7 @@ fi if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then echo $ac_n "checking for ranlib in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:6177: checking for ranlib in $with_build_time_tools" >&5 +echo "configure:6193: checking for ranlib in $with_build_time_tools" >&5 if test -x $with_build_time_tools/ranlib; then RANLIB_FOR_TARGET=`cd $with_build_time_tools && pwd`/ranlib ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET @@ -6191,7 +6207,7 @@ if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:6195: checking for $ac_word" >&5 +echo "configure:6211: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -6228,7 +6244,7 @@ if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then for ncn_progname in ranlib; do echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:6232: checking for ${ncn_progname} in $with_build_time_tools" >&5 +echo "configure:6248: checking for ${ncn_progname} in $with_build_time_tools" >&5 if test -x $with_build_time_tools/${ncn_progname}; then ac_cv_prog_RANLIB_FOR_TARGET=$with_build_time_tools/${ncn_progname} echo "$ac_t""yes" 1>&6 @@ -6245,7 +6261,7 @@ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET"; then # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:6249: checking for $ac_word" >&5 +echo "configure:6265: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -6276,7 +6292,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:6280: checking for $ac_word" >&5 +echo "configure:6296: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -6326,7 +6342,7 @@ fi if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then echo $ac_n "checking for strip in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:6330: checking for strip in $with_build_time_tools" >&5 +echo "configure:6346: checking for strip in $with_build_time_tools" >&5 if test -x $with_build_time_tools/strip; then STRIP_FOR_TARGET=`cd $with_build_time_tools && pwd`/strip ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET @@ -6344,7 +6360,7 @@ if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:6348: checking for $ac_word" >&5 +echo "configure:6364: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -6381,7 +6397,7 @@ if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then for ncn_progname in strip; do echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:6385: checking for ${ncn_progname} in $with_build_time_tools" >&5 +echo "configure:6401: checking for ${ncn_progname} in $with_build_time_tools" >&5 if test -x $with_build_time_tools/${ncn_progname}; then ac_cv_prog_STRIP_FOR_TARGET=$with_build_time_tools/${ncn_progname} echo "$ac_t""yes" 1>&6 @@ -6398,7 +6414,7 @@ if test -z "$ac_cv_prog_STRIP_FOR_TARGET"; then # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:6402: checking for $ac_word" >&5 +echo "configure:6418: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -6429,7 +6445,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:6433: checking for $ac_word" >&5 +echo "configure:6449: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -6479,7 +6495,7 @@ fi if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then echo $ac_n "checking for windres in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:6483: checking for windres in $with_build_time_tools" >&5 +echo "configure:6499: checking for windres in $with_build_time_tools" >&5 if test -x $with_build_time_tools/windres; then WINDRES_FOR_TARGET=`cd $with_build_time_tools && pwd`/windres ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET @@ -6497,7 +6513,7 @@ if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then # Extract the first word of "windres", so it can be a program name with args. set dummy windres; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:6501: checking for $ac_word" >&5 +echo "configure:6517: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_WINDRES_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -6534,7 +6550,7 @@ if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then if test -n "$with_build_time_tools"; then for ncn_progname in windres; do echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6 -echo "configure:6538: checking for ${ncn_progname} in $with_build_time_tools" >&5 +echo "configure:6554: checking for ${ncn_progname} in $with_build_time_tools" >&5 if test -x $with_build_time_tools/${ncn_progname}; then ac_cv_prog_WINDRES_FOR_TARGET=$with_build_time_tools/${ncn_progname} echo "$ac_t""yes" 1>&6 @@ -6551,7 +6567,7 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET"; then # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:6555: checking for $ac_word" >&5 +echo "configure:6571: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -6582,7 +6598,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:6586: checking for $ac_word" >&5 +echo "configure:6602: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -6630,7 +6646,7 @@ fi RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET" echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6 -echo "configure:6634: checking where to find the target ar" >&5 +echo "configure:6650: checking where to find the target ar" >&5 if test "x${build}" != "x${host}" ; then if expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path @@ -6663,7 +6679,7 @@ else fi fi echo $ac_n "checking where to find the target as""... $ac_c" 1>&6 -echo "configure:6667: checking where to find the target as" >&5 +echo "configure:6683: checking where to find the target as" >&5 if test "x${build}" != "x${host}" ; then if expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path @@ -6696,7 +6712,7 @@ else fi fi echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6 -echo "configure:6700: checking where to find the target cc" >&5 +echo "configure:6716: checking where to find the target cc" >&5 if test "x${build}" != "x${host}" ; then if expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path @@ -6729,7 +6745,7 @@ else fi fi echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6 -echo "configure:6733: checking where to find the target c++" >&5 +echo "configure:6749: checking where to find the target c++" >&5 if test "x${build}" != "x${host}" ; then if expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path @@ -6765,7 +6781,7 @@ else fi fi echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6 -echo "configure:6769: checking where to find the target c++ for libstdc++" >&5 +echo "configure:6785: checking where to find the target c++ for libstdc++" >&5 if test "x${build}" != "x${host}" ; then if expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path @@ -6801,7 +6817,7 @@ else fi fi echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6 -echo "configure:6805: checking where to find the target dlltool" >&5 +echo "configure:6821: checking where to find the target dlltool" >&5 if test "x${build}" != "x${host}" ; then if expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path @@ -6834,7 +6850,7 @@ else fi fi echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6 -echo "configure:6838: checking where to find the target gcc" >&5 +echo "configure:6854: checking where to find the target gcc" >&5 if test "x${build}" != "x${host}" ; then if expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path @@ -6867,7 +6883,7 @@ else fi fi echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6 -echo "configure:6871: checking where to find the target gcj" >&5 +echo "configure:6887: checking where to find the target gcj" >&5 if test "x${build}" != "x${host}" ; then if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path @@ -6903,7 +6919,7 @@ else fi fi echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6 -echo "configure:6907: checking where to find the target gfortran" >&5 +echo "configure:6923: checking where to find the target gfortran" >&5 if test "x${build}" != "x${host}" ; then if expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path @@ -6939,7 +6955,7 @@ else fi fi echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6 -echo "configure:6943: checking where to find the target ld" >&5 +echo "configure:6959: checking where to find the target ld" >&5 if test "x${build}" != "x${host}" ; then if expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path @@ -6972,7 +6988,7 @@ else fi fi echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6 -echo "configure:6976: checking where to find the target lipo" >&5 +echo "configure:6992: checking where to find the target lipo" >&5 if test "x${build}" != "x${host}" ; then if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path @@ -6995,7 +7011,7 @@ else fi fi echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6 -echo "configure:6999: checking where to find the target nm" >&5 +echo "configure:7015: checking where to find the target nm" >&5 if test "x${build}" != "x${host}" ; then if expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path @@ -7028,7 +7044,7 @@ else fi fi echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6 -echo "configure:7032: checking where to find the target objdump" >&5 +echo "configure:7048: checking where to find the target objdump" >&5 if test "x${build}" != "x${host}" ; then if expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path @@ -7061,7 +7077,7 @@ else fi fi echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6 -echo "configure:7065: checking where to find the target ranlib" >&5 +echo "configure:7081: checking where to find the target ranlib" >&5 if test "x${build}" != "x${host}" ; then if expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path @@ -7094,7 +7110,7 @@ else fi fi echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6 -echo "configure:7098: checking where to find the target strip" >&5 +echo "configure:7114: checking where to find the target strip" >&5 if test "x${build}" != "x${host}" ; then if expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path @@ -7127,7 +7143,7 @@ else fi fi echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6 -echo "configure:7131: checking where to find the target windres" >&5 +echo "configure:7147: checking where to find the target windres" >&5 if test "x${build}" != "x${host}" ; then if expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then # We already found the complete path @@ -7188,7 +7204,7 @@ fi echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:7192: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:7208: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -7345,34 +7361,15 @@ trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 # Transform confdefs.h into DEFS. # Protect against shell expansion while executing Makefile rules. # Protect against Makefile macro expansion. -# -# If the first sed substitution is executed (which looks for macros that -# take arguments), then we branch to the quote section. Otherwise, -# look for a macro that doesn't take arguments. -cat >confdef2opt.sed <<\_ACEOF -t clear -: clear -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g -t quote -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g -t quote -d -: quote -s,[ `~#$^&*(){}\\|;'"<>?],\\&,g -s,\[,\\&,g -s,\],\\&,g -s,\$,$$,g -p -_ACEOF -# We use echo to avoid assuming a particular line-breaking character. -# The extra dot is to prevent the shell from consuming trailing -# line-breaks from the sub-command output. A line-break within -# single-quotes doesn't work because, if this script is created in a -# platform that uses two characters for line-breaks (e.g., DOS), tr -# would break. -ac_LF_and_DOT=`echo; echo .` -DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` -rm -f confdef2opt.sed +cat > conftest.defs <<\EOF +s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g +s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g +s%\[%\\&%g +s%\]%\\&%g +s%\$%$$%g +EOF +DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` +rm -f conftest.defs # Without the "./", some shells look in PATH for config.status. -- cgit v1.1