From a8c548cb0c04dfbe117d2b268aaa1ae6714adbef Mon Sep 17 00:00:00 2001 From: Nick Clifton Date: Tue, 19 Dec 2000 22:22:02 +0000 Subject: Add missing support for arm-epoc-pe. --- binutils/ChangeLog | 6 + binutils/Makefile.in | 2 + binutils/aclocal.m4 | 18 + binutils/config.in | 3 - binutils/configure | 918 ++++++++++++++++++++++++----------------------- binutils/configure.in | 5 + binutils/dlltool.c | 9 +- binutils/po/binutils.pot | 140 ++++---- 8 files changed, 587 insertions(+), 514 deletions(-) (limited to 'binutils') diff --git a/binutils/ChangeLog b/binutils/ChangeLog index d43daa7..59c39bd 100644 --- a/binutils/ChangeLog +++ b/binutils/ChangeLog @@ -1,3 +1,9 @@ +2000-12-19 Nick Clifton + + * dlltool.c: Add missing support for arm-epoc-pe. + * configure.in: Add missing support for arm-epoc-pe. + * configure: Regenerate. + 2000-12-15 Nick Clifton * MAINTAINERS: Add Diego Novillo as a maintainer for the Intel diff --git a/binutils/Makefile.in b/binutils/Makefile.in index c3e0a53..d6c2c36 100644 --- a/binutils/Makefile.in +++ b/binutils/Makefile.in @@ -81,6 +81,8 @@ DEMANGLER_NAME = @DEMANGLER_NAME@ DLLTOOL = @DLLTOOL@ DLLTOOL_DEFS = @DLLTOOL_DEFS@ EXEEXT = @EXEEXT@ +GCJ = @GCJ@ +GCJFLAGS = @GCJFLAGS@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GT_NO = @GT_NO@ diff --git a/binutils/aclocal.m4 b/binutils/aclocal.m4 index b468950..e68badb 100644 --- a/binutils/aclocal.m4 +++ b/binutils/aclocal.m4 @@ -27,6 +27,24 @@ AC_DEFUN([CY_WITH_NLS],) AC_SUBST(INTLLIBS) ]) +#serial 1 +# This test replaces the one in autoconf. +# Currently this macro should have the same name as the autoconf macro +# because gettext's gettext.m4 (distributed in the automake package) +# still uses it. Otherwise, the use in gettext.m4 makes autoheader +# give these diagnostics: +# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX +# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX + +undefine([AC_ISC_POSIX]) + +AC_DEFUN(AC_ISC_POSIX, + [ + dnl This test replaces the obsolescent AC_ISC_POSIX kludge. + AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"]) + ] +) + # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. # But this isn't really a big deal. diff --git a/binutils/config.in b/binutils/config.in index 7b70d16..8a0e1c5 100644 --- a/binutils/config.in +++ b/binutils/config.in @@ -28,9 +28,6 @@ /* Define to `long' if doesn't define. */ #undef off_t -/* Define if you need to in order for stat and other things to work. */ -#undef _POSIX_SOURCE - /* Define to `unsigned' if doesn't define. */ #undef size_t diff --git a/binutils/configure b/binutils/configure index ab1032c..3f6021b 100755 --- a/binutils/configure +++ b/binutils/configure @@ -53,6 +53,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -167,6 +168,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -337,6 +339,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -502,12 +509,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -546,12 +557,12 @@ else fi echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:550: checking for Cygwin environment" >&5 +echo "configure:561: checking for Cygwin environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:577: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else @@ -579,19 +590,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:583: checking for mingw32 environment" >&5 +echo "configure:594: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:606: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else @@ -656,7 +667,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:660: checking host system type" >&5 +echo "configure:671: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -677,7 +688,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:681: checking target system type" >&5 +echo "configure:692: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -695,7 +706,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:699: checking build system type" >&5 +echo "configure:710: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -717,249 +728,49 @@ test "$host_alias" != "$target_alias" && NONENONEs,x,x, && program_prefix=${target_alias}- -# Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:724: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:754: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_prog_rejected=no - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break - fi - done - IFS="$ac_save_ifs" -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" - fi -fi -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - if test -z "$CC"; then - case "`uname -s`" in - *win32* | *WIN32*) - # Extract the first word of "cl", so it can be a program name with args. -set dummy cl; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:805: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6 +echo "configure:734: checking for strerror in -lcposix" >&5 +ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="cl" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - ;; - esac - fi - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } -fi - -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:837: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext << EOF - -#line 848 "configure" + ac_save_LIBS="$LIBS" +LIBS="-lcposix $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi +if { (eval echo configure:753: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:879: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:884: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - -if test $ac_cv_prog_gcc = yes; then - GCC=yes -else - GCC= -fi - -ac_test_CFLAGS="${CFLAGS+set}" -ac_save_CFLAGS="$CFLAGS" -CFLAGS= -echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:912: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes -else - ac_cv_prog_cc_g=no + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* +LIBS="$ac_save_LIBS" fi - -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi - -echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:944: checking for POSIXized ISC" >&5 -if test -d /etc/conf/kconfig.d && - grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 -then +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 - ISC=yes # If later tests want to check for ISC. - cat >> confdefs.h <<\EOF -#define _POSIX_SOURCE 1 -EOF - - if test "$GCC" = yes; then - CC="$CC -posix" - else - CC="$CC -Xp" - fi + LIBS="$LIBS -lcposix" else echo "$ac_t""no" 1>&6 - ISC= fi + + # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or @@ -973,7 +784,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:977: checking for a BSD compatible install" >&5 +echo "configure:788: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1026,7 +837,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:1030: checking whether build environment is sane" >&5 +echo "configure:841: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -1083,7 +894,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:1087: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:898: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1129,7 +940,7 @@ EOF missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:1133: checking for working aclocal" >&5 +echo "configure:944: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -1142,7 +953,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:1146: checking for working autoconf" >&5 +echo "configure:957: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -1155,7 +966,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:1159: checking for working automake" >&5 +echo "configure:970: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -1168,7 +979,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:1172: checking for working autoheader" >&5 +echo "configure:983: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -1181,7 +992,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:1185: checking for working makeinfo" >&5 +echo "configure:996: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -1264,6 +1075,228 @@ else enable_fast_install=yes fi +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1082: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="gcc" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1112: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_prog_rejected=no + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + break + fi + done + IFS="$ac_save_ifs" +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + set dummy "$ac_dir/$ac_word" "$@" + shift + ac_cv_prog_CC="$@" + fi +fi +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + if test -z "$CC"; then + case "`uname -s`" in + *win32* | *WIN32*) + # Extract the first word of "cl", so it can be a program name with args. +set dummy cl; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1163: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="cl" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + ;; + esac + fi + test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +fi + +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +echo "configure:1195: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +cat > conftest.$ac_ext << EOF + +#line 1206 "configure" +#include "confdefs.h" + +main(){return(0);} +EOF +if { (eval echo configure:1211: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + ac_cv_prog_cc_works=yes + # If we can't run a trivial program, we are probably using a cross compiler. + if (./conftest; exit) 2>/dev/null; then + ac_cv_prog_cc_cross=no + else + ac_cv_prog_cc_cross=yes + fi +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + ac_cv_prog_cc_works=no +fi +rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 +if test $ac_cv_prog_cc_works = no; then + { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } +fi +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +echo "configure:1237: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 +cross_compiling=$ac_cv_prog_cc_cross + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +echo "configure:1242: checking whether we are using GNU C" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + +if test $ac_cv_prog_gcc = yes; then + GCC=yes +else + GCC= +fi + +ac_test_CFLAGS="${CFLAGS+set}" +ac_save_CFLAGS="$CFLAGS" +CFLAGS= +echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:1270: checking whether ${CC-cc} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.c +if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ac_cv_prog_cc_g=yes +else + ac_cv_prog_cc_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi + # Check whether --with-gnu-ld or --without-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then withval="$with_gnu_ld" @@ -1276,7 +1309,7 @@ ac_prog=ld if test "$ac_cv_prog_gcc" = yes; then # Check if gcc -print-prog-name=ld gives a path. echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 -echo "configure:1280: checking for ld used by GCC" >&5 +echo "configure:1313: checking for ld used by GCC" >&5 case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw @@ -1306,10 +1339,10 @@ echo "configure:1280: checking for ld used by GCC" >&5 esac elif test "$with_gnu_ld" = yes; then echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 -echo "configure:1310: checking for GNU ld" >&5 +echo "configure:1343: checking for GNU ld" >&5 else echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 -echo "configure:1313: checking for non-GNU ld" >&5 +echo "configure:1346: checking for non-GNU ld" >&5 fi if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1344,7 +1377,7 @@ else fi test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 -echo "configure:1348: checking if the linker ($LD) is GNU ld" >&5 +echo "configure:1381: checking if the linker ($LD) is GNU ld" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1361,7 +1394,7 @@ with_gnu_ld=$ac_cv_prog_gnu_ld echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6 -echo "configure:1365: checking for $LD option to reload object files" >&5 +echo "configure:1398: checking for $LD option to reload object files" >&5 if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1373,7 +1406,7 @@ reload_flag=$lt_cv_ld_reload_flag test -n "$reload_flag" && reload_flag=" $reload_flag" echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 -echo "configure:1377: checking for BSD-compatible nm" >&5 +echo "configure:1410: checking for BSD-compatible nm" >&5 if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1411,7 +1444,7 @@ NM="$ac_cv_path_NM" echo "$ac_t""$NM" 1>&6 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:1415: checking whether ln -s works" >&5 +echo "configure:1448: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1432,7 +1465,7 @@ else fi echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6 -echo "configure:1436: checking how to recognise dependant libraries" >&5 +echo "configure:1469: checking how to recognise dependant libraries" >&5 if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1575,13 +1608,13 @@ file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method echo $ac_n "checking for object suffix""... $ac_c" 1>&6 -echo "configure:1579: checking for object suffix" >&5 +echo "configure:1612: checking for object suffix" >&5 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else rm -f conftest* echo 'int i = 1;' > conftest.$ac_ext -if { (eval echo configure:1585: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1618: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then for ac_file in conftest.*; do case $ac_file in *.c) ;; @@ -1601,7 +1634,7 @@ ac_objext=$ac_cv_objext echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:1605: checking for executable suffix" >&5 +echo "configure:1638: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1611,10 +1644,10 @@ else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:1615: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:1648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in - *.c | *.o | *.obj) ;; + *.c | *.o | *.obj | *.ilk | *.pdb) ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; esac done @@ -1644,7 +1677,7 @@ case "$deplibs_check_method" in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6 -echo "configure:1648: checking for ${ac_tool_prefix}file" >&5 +echo "configure:1681: checking for ${ac_tool_prefix}file" >&5 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1706,7 +1739,7 @@ fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then echo $ac_n "checking for file""... $ac_c" 1>&6 -echo "configure:1710: checking for file" >&5 +echo "configure:1743: checking for file" >&5 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1777,7 +1810,7 @@ esac # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1781: checking for $ac_word" >&5 +echo "configure:1814: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1809,7 +1842,7 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1813: checking for $ac_word" >&5 +echo "configure:1846: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1844,7 +1877,7 @@ fi # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1848: checking for $ac_word" >&5 +echo "configure:1881: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1876,7 +1909,7 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1880: checking for $ac_word" >&5 +echo "configure:1913: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1943,8 +1976,8 @@ test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic" case "$host" in *-*-irix6*) # Find out which ABI we are using. - echo '#line 1947 "configure"' > conftest.$ac_ext - if { (eval echo configure:1948: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + echo '#line 1980 "configure"' > conftest.$ac_ext + if { (eval echo configure:1981: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then case "`/usr/bin/file conftest.o`" in *32-bit*) LD="${LD-ld} -32" @@ -1965,7 +1998,7 @@ case "$host" in SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 -echo "configure:1969: checking whether the C compiler needs -belf" >&5 +echo "configure:2002: checking whether the C compiler needs -belf" >&5 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1978,14 +2011,14 @@ ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$a cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2022: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* lt_cv_cc_needs_belf=yes else @@ -2159,7 +2192,7 @@ fi # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2163: checking for $ac_word" >&5 +echo "configure:2196: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2189,7 +2222,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2193: checking for $ac_word" >&5 +echo "configure:2226: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2240,7 +2273,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2244: checking for $ac_word" >&5 +echo "configure:2277: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2272,7 +2305,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:2276: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:2309: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -2283,12 +2316,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 2287 "configure" +#line 2320 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:2292: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2325: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -2314,12 +2347,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:2318: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:2351: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:2323: checking whether we are using GNU C" >&5 +echo "configure:2356: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2328,7 +2361,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2332: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2365: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -2347,7 +2380,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:2351: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:2384: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2384,7 +2417,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2388: checking for $ac_word" >&5 +echo "configure:2421: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2415,7 +2448,7 @@ done test -n "$YACC" || YACC="yacc" echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:2419: checking how to run the C preprocessor" >&5 +echo "configure:2452: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -2430,13 +2463,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2440: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2473: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2447,13 +2480,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2457: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2490: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2464,13 +2497,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2474: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2507: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2500,7 +2533,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2504: checking for $ac_word" >&5 +echo "configure:2537: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2533,7 +2566,7 @@ test -n "$LEX" || LEX=""$missing_dir/missing flex"" # Extract the first word of "flex", so it can be a program name with args. set dummy flex; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2537: checking for $ac_word" >&5 +echo "configure:2570: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2567,7 +2600,7 @@ then *) ac_lib=l ;; esac echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6 -echo "configure:2571: checking for yywrap in -l$ac_lib" >&5 +echo "configure:2604: checking for yywrap in -l$ac_lib" >&5 ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2575,7 +2608,7 @@ else ac_save_LIBS="$LIBS" LIBS="-l$ac_lib $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2623: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2609,7 +2642,7 @@ fi fi echo $ac_n "checking lex output file root""... $ac_c" 1>&6 -echo "configure:2613: checking lex output file root" >&5 +echo "configure:2646: checking lex output file root" >&5 if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2630,7 +2663,7 @@ echo "$ac_t""$ac_cv_prog_lex_root" 1>&6 LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6 -echo "configure:2634: checking whether yytext is a pointer" >&5 +echo "configure:2667: checking whether yytext is a pointer" >&5 if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2642,14 +2675,14 @@ echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c ac_save_LIBS="$LIBS" LIBS="$LIBS $LEXLIB" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2686: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_prog_lex_yytext_pointer=yes else @@ -2675,7 +2708,7 @@ ALL_LINGUAS= # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2679: checking for $ac_word" >&5 +echo "configure:2712: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2703,12 +2736,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:2707: checking for ANSI C header files" >&5 +echo "configure:2740: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -2716,7 +2749,7 @@ else #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2720: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2753: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2733,7 +2766,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -2751,7 +2784,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -2772,7 +2805,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -2783,7 +2816,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:2787: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2820: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -2807,12 +2840,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:2811: checking for working const" >&5 +echo "configure:2844: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2898: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -2882,21 +2915,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:2886: checking for inline" >&5 +echo "configure:2919: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2933: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -2922,12 +2955,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:2926: checking for off_t" >&5 +echo "configure:2959: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -2955,12 +2988,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:2959: checking for size_t" >&5 +echo "configure:2992: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -2990,19 +3023,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:2994: checking for working alloca.h" >&5 +echo "configure:3027: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:3006: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3039: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -3023,12 +3056,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:3027: checking for alloca" >&5 +echo "configure:3060: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3093: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -3088,12 +3121,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:3092: checking whether alloca needs Cray hooks" >&5 +echo "configure:3125: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3122: checking for $ac_func" >&5 +echo "configure:3155: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3183: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3173,7 +3206,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:3177: checking stack direction for C alloca" >&5 +echo "configure:3210: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3181,7 +3214,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3237: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -3225,17 +3258,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3229: checking for $ac_hdr" >&5 +echo "configure:3262: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3239: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3272: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3264,12 +3297,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3268: checking for $ac_func" >&5 +echo "configure:3301: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3329: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3317,7 +3350,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:3321: checking for working mmap" >&5 +echo "configure:3354: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3325,7 +3358,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -3493,17 +3526,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3497: checking for $ac_hdr" >&5 +echo "configure:3530: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3507: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3540: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3533,12 +3566,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3537: checking for $ac_func" >&5 +echo "configure:3570: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3598: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3590,12 +3623,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3594: checking for $ac_func" >&5 +echo "configure:3627: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3655: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3652,19 +3685,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:3656: checking for LC_MESSAGES" >&5 +echo "configure:3689: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:3668: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3701: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -3685,7 +3718,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:3689: checking whether NLS is requested" >&5 +echo "configure:3722: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -3705,7 +3738,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:3709: checking whether included gettext is requested" >&5 +echo "configure:3742: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -3724,17 +3757,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:3728: checking for libintl.h" >&5 +echo "configure:3761: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3738: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3771: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3751,19 +3784,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:3755: checking for gettext in libc" >&5 +echo "configure:3788: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:3767: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3800: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -3779,7 +3812,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:3783: checking for bindtextdomain in -lintl" >&5 +echo "configure:3816: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3787,7 +3820,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3835: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3814,19 +3847,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:3818: checking for gettext in libintl" >&5 +echo "configure:3851: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3863: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -3854,7 +3887,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3858: checking for $ac_word" >&5 +echo "configure:3891: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3888,12 +3921,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3892: checking for $ac_func" >&5 +echo "configure:3925: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3953: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3943,7 +3976,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3947: checking for $ac_word" >&5 +echo "configure:3980: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3979,7 +4012,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3983: checking for $ac_word" >&5 +echo "configure:4016: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4011,7 +4044,7 @@ else fi cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4056: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -4051,7 +4084,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4055: checking for $ac_word" >&5 +echo "configure:4088: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4085,7 +4118,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4089: checking for $ac_word" >&5 +echo "configure:4122: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4121,7 +4154,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4125: checking for $ac_word" >&5 +echo "configure:4158: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4211,7 +4244,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:4215: checking for catalogs to be installed" >&5 +echo "configure:4248: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -4239,17 +4272,17 @@ echo "configure:4215: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:4243: checking for linux/version.h" >&5 +echo "configure:4276: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4253: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4286: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4312,7 +4345,7 @@ fi echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:4316: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:4349: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -4337,7 +4370,7 @@ fi echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:4341: checking for executable suffix" >&5 +echo "configure:4374: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4347,10 +4380,10 @@ else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:4351: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:4384: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in - *.c | *.o | *.obj) ;; + *.c | *.o | *.obj | *.ilk | *.pdb) ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; esac done @@ -4390,7 +4423,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4394: checking for $ac_word" >&5 +echo "configure:4427: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4429,7 +4462,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:4433: checking for a BSD compatible install" >&5 +echo "configure:4466: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -4496,7 +4529,7 @@ if test "x$cross_compiling" = "xno"; then EXEEXT_FOR_BUILD='$(EXEEXT)' else echo $ac_n "checking for build system executable suffix""... $ac_c" 1>&6 -echo "configure:4500: checking for build system executable suffix" >&5 +echo "configure:4533: checking for build system executable suffix" >&5 if eval "test \"`echo '$''{'bfd_cv_build_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4531,17 +4564,17 @@ for ac_hdr in string.h strings.h stdlib.h unistd.h fcntl.h sys/file.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:4535: checking for $ac_hdr" >&5 +echo "configure:4568: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4545: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4578: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4568,12 +4601,12 @@ fi done echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6 -echo "configure:4572: checking for sys/wait.h that is POSIX.1 compatible" >&5 +echo "configure:4605: checking for sys/wait.h that is POSIX.1 compatible" >&5 if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -4589,7 +4622,7 @@ wait (&s); s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; ; return 0; } EOF -if { (eval echo configure:4593: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4626: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_header_sys_wait_h=yes else @@ -4612,19 +4645,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:4616: checking for working alloca.h" >&5 +echo "configure:4649: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:4628: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4661: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -4645,12 +4678,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:4649: checking for alloca" >&5 +echo "configure:4682: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4715: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -4710,12 +4743,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:4714: checking whether alloca needs Cray hooks" >&5 +echo "configure:4747: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4744: checking for $ac_func" >&5 +echo "configure:4777: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4805: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4795,7 +4828,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:4799: checking stack direction for C alloca" >&5 +echo "configure:4832: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4803,7 +4836,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:4859: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -4846,12 +4879,12 @@ fi for ac_func in sbrk utimes setmode do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4850: checking for $ac_func" >&5 +echo "configure:4883: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4911: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4902,14 +4935,14 @@ done # Some systems have frexp only in -lm, not in -lc. echo $ac_n "checking for library containing frexp""... $ac_c" 1>&6 -echo "configure:4906: checking for library containing frexp" >&5 +echo "configure:4939: checking for library containing frexp" >&5 if eval "test \"`echo '$''{'ac_cv_search_frexp'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_func_search_save_LIBS="$LIBS" ac_cv_search_frexp="no" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4957: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_search_frexp="none required" else @@ -4931,7 +4964,7 @@ rm -f conftest* test "$ac_cv_search_frexp" = "no" && for i in m; do LIBS="-l$i $ac_func_search_save_LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4979: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_search_frexp="-l$i" break @@ -4964,19 +4997,19 @@ else : fi echo $ac_n "checking for time_t in time.h""... $ac_c" 1>&6 -echo "configure:4968: checking for time_t in time.h" >&5 +echo "configure:5001: checking for time_t in time.h" >&5 if eval "test \"`echo '$''{'bu_cv_decl_time_t_time_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { time_t i; ; return 0; } EOF -if { (eval echo configure:4980: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5013: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bu_cv_decl_time_t_time_h=yes else @@ -4997,19 +5030,19 @@ EOF fi echo $ac_n "checking for time_t in sys/types.h""... $ac_c" 1>&6 -echo "configure:5001: checking for time_t in sys/types.h" >&5 +echo "configure:5034: checking for time_t in sys/types.h" >&5 if eval "test \"`echo '$''{'bu_cv_decl_time_t_types_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { time_t i; ; return 0; } EOF -if { (eval echo configure:5013: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5046: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bu_cv_decl_time_t_types_h=yes else @@ -5032,12 +5065,12 @@ fi # Under Next 3.2 apparently does not define struct utimbuf # by default. echo $ac_n "checking for utime.h""... $ac_c" 1>&6 -echo "configure:5036: checking for utime.h" >&5 +echo "configure:5069: checking for utime.h" >&5 if eval "test \"`echo '$''{'bu_cv_header_utime_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #ifdef HAVE_TIME_H @@ -5048,7 +5081,7 @@ int main() { struct utimbuf s; ; return 0; } EOF -if { (eval echo configure:5052: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5085: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bu_cv_header_utime_h=yes else @@ -5069,12 +5102,12 @@ EOF fi echo $ac_n "checking whether fprintf must be declared""... $ac_c" 1>&6 -echo "configure:5073: checking whether fprintf must be declared" >&5 +echo "configure:5106: checking whether fprintf must be declared" >&5 if eval "test \"`echo '$''{'bfd_cv_decl_needed_fprintf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < @@ -5095,7 +5128,7 @@ int main() { char *(*pfn) = (char *(*)) fprintf ; return 0; } EOF -if { (eval echo configure:5099: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5132: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bfd_cv_decl_needed_fprintf=no else @@ -5116,12 +5149,12 @@ EOF fi echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6 -echo "configure:5120: checking whether strstr must be declared" >&5 +echo "configure:5153: checking whether strstr must be declared" >&5 if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < @@ -5142,7 +5175,7 @@ int main() { char *(*pfn) = (char *(*)) strstr ; return 0; } EOF -if { (eval echo configure:5146: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5179: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bfd_cv_decl_needed_strstr=no else @@ -5163,12 +5196,12 @@ EOF fi echo $ac_n "checking whether sbrk must be declared""... $ac_c" 1>&6 -echo "configure:5167: checking whether sbrk must be declared" >&5 +echo "configure:5200: checking whether sbrk must be declared" >&5 if eval "test \"`echo '$''{'bfd_cv_decl_needed_sbrk'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < @@ -5189,7 +5222,7 @@ int main() { char *(*pfn) = (char *(*)) sbrk ; return 0; } EOF -if { (eval echo configure:5193: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5226: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bfd_cv_decl_needed_sbrk=no else @@ -5210,12 +5243,12 @@ EOF fi echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6 -echo "configure:5214: checking whether getenv must be declared" >&5 +echo "configure:5247: checking whether getenv must be declared" >&5 if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < @@ -5236,7 +5269,7 @@ int main() { char *(*pfn) = (char *(*)) getenv ; return 0; } EOF -if { (eval echo configure:5240: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5273: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bfd_cv_decl_needed_getenv=no else @@ -5257,12 +5290,12 @@ EOF fi echo $ac_n "checking whether environ must be declared""... $ac_c" 1>&6 -echo "configure:5261: checking whether environ must be declared" >&5 +echo "configure:5294: checking whether environ must be declared" >&5 if eval "test \"`echo '$''{'bfd_cv_decl_needed_environ'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < @@ -5283,7 +5316,7 @@ int main() { char *(*pfn) = (char *(*)) environ ; return 0; } EOF -if { (eval echo configure:5287: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5320: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bfd_cv_decl_needed_environ=no else @@ -5369,6 +5402,11 @@ do *-*-hms*) BUILD_SRCONV='$(SRCONV_PROG)' ;; esac case $targ in + arm-epoc-pe*) + BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' + DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_ARM_EPOC -DDLLTOOL_ARM" + BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' + ;; arm-*pe* | arm-*-wince) BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_ARM" @@ -5588,7 +5626,6 @@ s%@build_alias@%$build_alias%g s%@build_cpu@%$build_cpu%g s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g -s%@CC@%$CC%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g @@ -5600,6 +5637,7 @@ s%@AUTOMAKE@%$AUTOMAKE%g s%@AUTOHEADER@%$AUTOHEADER%g s%@MAKEINFO@%$MAKEINFO%g s%@SET_MAKE@%$SET_MAKE%g +s%@CC@%$CC%g s%@LN_S@%$LN_S%g s%@OBJEXT@%$OBJEXT%g s%@EXEEXT@%$EXEEXT%g diff --git a/binutils/configure.in b/binutils/configure.in index d0bd44b..184855b 100644 --- a/binutils/configure.in +++ b/binutils/configure.in @@ -204,6 +204,11 @@ changequote([,])dnl *-*-hms*) BUILD_SRCONV='$(SRCONV_PROG)' ;; esac case $targ in + arm-epoc-pe*) + BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' + DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_ARM_EPOC -DDLLTOOL_ARM" + BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' + ;; arm-*pe* | arm-*-wince) BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_ARM" diff --git a/binutils/dlltool.c b/binutils/dlltool.c index b618b96..e989f0c 100644 --- a/binutils/dlltool.c +++ b/binutils/dlltool.c @@ -383,8 +383,12 @@ static FILE *output_def; static FILE *base_file; #ifdef DLLTOOL_ARM +#ifdef DLLTOOL_ARM_EPOC +static const char *mname = "arm-epoc"; +#else static const char *mname = "arm"; #endif +#endif #ifdef DLLTOOL_I386 static const char *mname = "i386"; @@ -605,7 +609,7 @@ mtable[] = , { #define MARM_EPOC 9 - "arm", ".byte", ".short", ".long", ".asciz", "@", + "arm-epoc", ".byte", ".short", ".long", ".asciz", "@", "ldr\tip,[pc]\n\tldr\tpc,[ip]\n\t.long", ".global", ".space", ".align\t2",".align\t4", "", "epoc-pe-arm-little", bfd_arch_arm, @@ -726,6 +730,7 @@ rvaafter (machine) case MMCORE_LE: case MMCORE_ELF: case MMCORE_ELF_LE: + case MARM_EPOC: break; default: /* xgettext:c-format */ @@ -750,6 +755,7 @@ rvabefore (machine) case MMCORE_LE: case MMCORE_ELF: case MMCORE_ELF_LE: + case MARM_EPOC: return ".rva\t"; default: /* xgettext:c-format */ @@ -773,6 +779,7 @@ asm_prefix (machine) case MMCORE_LE: case MMCORE_ELF: case MMCORE_ELF_LE: + case MARM_EPOC: break; case M386: return "_"; diff --git a/binutils/po/binutils.pot b/binutils/po/binutils.pot index f03c595..05dc739 100644 --- a/binutils/po/binutils.pot +++ b/binutils/po/binutils.pot @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2000-12-12 12:49-0800\n" +"POT-Creation-Date: 2000-12-19 14:20-0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -428,325 +428,325 @@ msgstr "" msgid "debug_write_type: illegal type encountered" msgstr "" -#: dlltool.c:732 dlltool.c:756 dlltool.c:781 +#: dlltool.c:737 dlltool.c:762 dlltool.c:788 #, c-format msgid "Internal error: Unknown machine type: %d" msgstr "" -#: dlltool.c:818 +#: dlltool.c:825 #, c-format msgid "Can't open def file: %s" msgstr "" -#: dlltool.c:823 +#: dlltool.c:830 #, c-format msgid "Processing def file: %s" msgstr "" -#: dlltool.c:827 +#: dlltool.c:834 msgid "Processed def file" msgstr "" -#: dlltool.c:852 +#: dlltool.c:859 #, c-format msgid "Syntax error in def file %s:%d" msgstr "" -#: dlltool.c:885 +#: dlltool.c:892 #, c-format msgid "NAME: %s base: %x" msgstr "" -#: dlltool.c:888 dlltool.c:907 +#: dlltool.c:895 dlltool.c:914 msgid "Can't have LIBRARY and NAME" msgstr "" -#: dlltool.c:904 +#: dlltool.c:911 #, c-format msgid "LIBRARY: %s base: %x" msgstr "" -#: dlltool.c:1162 resrc.c:271 +#: dlltool.c:1169 resrc.c:271 #, c-format msgid "wait: %s" msgstr "" -#: dlltool.c:1167 dllwrap.c:456 resrc.c:276 +#: dlltool.c:1174 dllwrap.c:456 resrc.c:276 #, c-format msgid "subprocess got fatal signal %d" msgstr "" -#: dlltool.c:1173 dllwrap.c:463 resrc.c:283 +#: dlltool.c:1180 dllwrap.c:463 resrc.c:283 #, c-format msgid "%s exited with status %d" msgstr "" -#: dlltool.c:1205 +#: dlltool.c:1212 #, c-format msgid "Sucking in info from %s section in %s" msgstr "" -#: dlltool.c:1329 +#: dlltool.c:1336 #, c-format msgid "Excluding symbol: %s" msgstr "" -#: dlltool.c:1424 dlltool.c:1435 nm.c:946 nm.c:957 objdump.c:443 objdump.c:460 +#: dlltool.c:1431 dlltool.c:1442 nm.c:946 nm.c:957 objdump.c:443 objdump.c:460 #, c-format msgid "%s: no symbols" msgstr "" #. FIXME: we ought to read in and block out the base relocations -#: dlltool.c:1462 +#: dlltool.c:1469 #, c-format msgid "Done reading %s" msgstr "" -#: dlltool.c:1473 +#: dlltool.c:1480 #, c-format msgid "Unable to open object file: %s" msgstr "" -#: dlltool.c:1476 +#: dlltool.c:1483 #, c-format msgid "Scanning object file %s" msgstr "" -#: dlltool.c:1491 +#: dlltool.c:1498 #, c-format msgid "Cannot produce mcore-elf dll from archive file: %s" msgstr "" -#: dlltool.c:1583 +#: dlltool.c:1590 msgid "Adding exports to output file" msgstr "" -#: dlltool.c:1628 +#: dlltool.c:1635 msgid "Added exports to output file" msgstr "" -#: dlltool.c:1752 +#: dlltool.c:1759 #, c-format msgid "Generating export file: %s" msgstr "" -#: dlltool.c:1757 +#: dlltool.c:1764 #, c-format msgid "Unable to open temporary assembler file: %s" msgstr "" -#: dlltool.c:1760 +#: dlltool.c:1767 #, c-format msgid "Opened temporary file: %s" msgstr "" -#: dlltool.c:1974 +#: dlltool.c:1981 msgid "Generated exports file" msgstr "" -#: dlltool.c:2229 +#: dlltool.c:2236 #, c-format msgid "bfd_open failed open stub file: %s" msgstr "" -#: dlltool.c:2232 +#: dlltool.c:2239 #, c-format msgid "Creating stub file: %s" msgstr "" -#: dlltool.c:2619 +#: dlltool.c:2626 #, c-format msgid "failed to open temporary head file: %s" msgstr "" -#: dlltool.c:2678 +#: dlltool.c:2685 #, c-format msgid "failed to open temporary tail file: %s" msgstr "" -#: dlltool.c:2746 +#: dlltool.c:2753 #, c-format msgid "Can't open .lib file: %s" msgstr "" -#: dlltool.c:2749 +#: dlltool.c:2756 #, c-format msgid "Creating library file: %s" msgstr "" -#: dlltool.c:2808 +#: dlltool.c:2815 #, c-format msgid "cannot delete %s: %s" msgstr "" -#: dlltool.c:2812 +#: dlltool.c:2819 msgid "Created lib file" msgstr "" -#: dlltool.c:2917 +#: dlltool.c:2924 #, c-format msgid "Warning, ignoring duplicate EXPORT %s %d,%d" msgstr "" -#: dlltool.c:2923 +#: dlltool.c:2930 #, c-format msgid "Error, duplicate EXPORT with oridinals: %s" msgstr "" -#: dlltool.c:3050 +#: dlltool.c:3057 msgid "Processing definitions" msgstr "" -#: dlltool.c:3088 +#: dlltool.c:3095 msgid "Processed definitions" msgstr "" #. xgetext:c-format -#: dlltool.c:3099 dllwrap.c:520 +#: dlltool.c:3106 dllwrap.c:520 #, c-format msgid "Usage %s \n" msgstr "" #. xgetext:c-format -#: dlltool.c:3101 +#: dlltool.c:3108 #, c-format msgid "" " -m --machine Create as DLL for . [default: %s]\n" msgstr "" -#: dlltool.c:3102 +#: dlltool.c:3109 msgid "" " possible : arm[_interwork], i386, mcore[-elf]{-le|-be}, " "ppc, thumb\n" msgstr "" -#: dlltool.c:3103 +#: dlltool.c:3110 msgid " -e --output-exp Generate an export file.\n" msgstr "" -#: dlltool.c:3104 +#: dlltool.c:3111 msgid " -l --output-lib Generate an interface library.\n" msgstr "" -#: dlltool.c:3105 +#: dlltool.c:3112 msgid " -a --add-indirect Add dll indirects to export file.\n" msgstr "" -#: dlltool.c:3106 +#: dlltool.c:3113 msgid "" " -D --dllname Name of input dll to put into interface lib.\n" msgstr "" -#: dlltool.c:3107 +#: dlltool.c:3114 msgid " -d --input-def Name of .def file to be read in.\n" msgstr "" -#: dlltool.c:3108 +#: dlltool.c:3115 msgid " -z --output-def Name of .def file to be created.\n" msgstr "" -#: dlltool.c:3109 +#: dlltool.c:3116 msgid " --export-all-symbols Export all symbols to .def\n" msgstr "" -#: dlltool.c:3110 +#: dlltool.c:3117 msgid " --no-export-all-symbols Only export listed symbols\n" msgstr "" -#: dlltool.c:3111 +#: dlltool.c:3118 msgid " --exclude-symbols Don't export \n" msgstr "" -#: dlltool.c:3112 +#: dlltool.c:3119 msgid " --no-default-excludes Clear default exclude symbols\n" msgstr "" -#: dlltool.c:3113 +#: dlltool.c:3120 msgid " -b --base-file Read linker generated base file.\n" msgstr "" -#: dlltool.c:3114 +#: dlltool.c:3121 msgid " -x --no-idata4 Don't generate idata$4 section.\n" msgstr "" -#: dlltool.c:3115 +#: dlltool.c:3122 msgid " -c --no-idata5 Don't generate idata$5 section.\n" msgstr "" -#: dlltool.c:3116 +#: dlltool.c:3123 msgid "" " -U --add-underscore Add underscores to symbols in interface " "library.\n" msgstr "" -#: dlltool.c:3117 +#: dlltool.c:3124 msgid " -k --kill-at Kill @ from exported names.\n" msgstr "" -#: dlltool.c:3118 +#: dlltool.c:3125 msgid " -A --add-stdcall-alias Add aliases without @.\n" msgstr "" -#: dlltool.c:3119 +#: dlltool.c:3126 msgid " -S --as Use for assembler.\n" msgstr "" -#: dlltool.c:3120 +#: dlltool.c:3127 msgid " -f --as-flags Pass to the assembler.\n" msgstr "" -#: dlltool.c:3121 +#: dlltool.c:3128 msgid "" " -C --compat-implib Create backward compatible import library.\n" msgstr "" -#: dlltool.c:3122 +#: dlltool.c:3129 msgid "" " -n --no-delete Keep temp files (repeat for extra " "preservation).\n" msgstr "" -#: dlltool.c:3123 +#: dlltool.c:3130 msgid " -v --verbose Be verbose.\n" msgstr "" -#: dlltool.c:3124 +#: dlltool.c:3131 msgid " -V --version Display the program version.\n" msgstr "" -#: dlltool.c:3125 +#: dlltool.c:3132 msgid " -h --help Display this information.\n" msgstr "" -#: dlltool.c:3127 +#: dlltool.c:3134 msgid "" " -M --mcore-elf Process mcore-elf object files into .\n" msgstr "" -#: dlltool.c:3128 +#: dlltool.c:3135 msgid " -L --linker Use as the linker.\n" msgstr "" -#: dlltool.c:3129 +#: dlltool.c:3136 msgid " -F --linker-flags Pass to the linker.\n" msgstr "" -#: dlltool.c:3273 +#: dlltool.c:3280 #, c-format msgid "Unable to open base-file: %s" msgstr "" -#: dlltool.c:3302 +#: dlltool.c:3309 #, c-format msgid "Machine '%s' not supported" msgstr "" -#: dlltool.c:3405 dllwrap.c:241 +#: dlltool.c:3412 dllwrap.c:241 #, c-format msgid "Tried file: %s" msgstr "" -#: dlltool.c:3412 dllwrap.c:248 +#: dlltool.c:3419 dllwrap.c:248 #, c-format msgid "Using file: %s" msgstr "" -- cgit v1.1