Age | Commit message (Collapse) | Author | Files | Lines |
|
Every port using this sets the 1st arg to yes and the 2nd arg to "".
These are the defaults we probably want anyways in order to unify the
codebase, so move them to the macro and only allow ports to declare
extra hardware models.
|
|
This updates the sim so that it unconditionally uses sys/time.h. This
is in agreement with existing code, and a recent change to BFD.
I also think that sys/times.h is never needed by the sim, so this
patch removes the check and the one spot that was conditionally
including it.
sim/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* m4/sim_ac_common.m4 (SIM_AC_COMMON): Don't check for sys/time.h
or sys/times.h.
sim/aarch64/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/arm/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/avr/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/bfin/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/bpf/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/common/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* sim-utils.c: Update includes.
sim/cr16/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* simops.c: Update includes.
* configure, config.in: Rebuild.
sim/cris/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* rvdummy.c: Update includes.
* dv-rv.c: Update includes.
* configure, config.in: Rebuild.
sim/d10v/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/erc32/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/example-synacor/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/frv/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/ft32/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/h8300/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/iq2000/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/lm32/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/m32c/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/m32r/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/m68hc11/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/mcore/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/microblaze/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/mips/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/mn10300/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/moxie/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/msp430/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/or1k/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/ppc/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* mon.c: Update includes.
* emul_unix.c: Update includes.
(do_unix_gettimeofday): Update condition.
sim/pru/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/riscv/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/rl78/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/rx/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
sim/sh/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* interp.c: Update includes.
* configure, config.in: Rebuild.
sim/v850/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
|
|
Some spots in the sim build used manual dependencies, and some spots
did a compilation by hand but did not use the automatic dependency
tracking code. This patch fixes these spots.
I didn't touch ppc, because it doesn't use the common Makefile code.
I also didn't touch objects that are for the build machine, because
automatic dependencies don't work for those.
sim/arm/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (armemu26.o, armemu32.o): Use COMPILE and
POSTCOMPILE.
sim/bpf/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (arch.o, cpu.o, sim-if.o, traps.o): Remove.
(mloop-le.o, mloop-be.o, decode-le.o, decode-be.o, sim-le.o)
(sim-be.o): Use COMPILE and POSTCOMPILE.
(SIM_EXTRA_DEPS): Add eng-le.h, eng-be.h.
sim/cr16/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (SIM_EXTRA_DEPS): New variable.
(simops.o): Remove.
sim/cris/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (sim-if.o, dv-cris.o, dv-rv.o, arch.o, traps.o)
(devices.o, crisv10f.o, mloopv10f.o, cpuv10.o, decodev10.o)
(modelv10.o, crisv32f.o, mloopv32f.o, cpuv32.o, decodev32.o)
(modelv32.o): Remove.
(SIM_EXTRA_DEPS): Add engv10.h.
sim/d10v/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (SIM_EXTRA_DEPS): New variable.
(simops.o): Remove.
sim/frv/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (arch.o, devices.o, frv.o, traps.o, pipeline.o)
(interrupts.o, memory.o, cache.o, options.o, reset.o)
(registers.o, profile.o, profile-fr400.o, profile-fr450.o)
(profile-fr500.o, profile-fr550.o, sim-if.o, mloop.o, cpu.o)
(decode.o, sem.o, model.o): Remove.
(SIM_EXTRA_DEPS): Add eng.h.
sim/iq2000/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (sim-if.o): Remove.
(arch.o): Use COMPILE and POSTCOMPILE.
(devices.o, iq2000.o, mloop.o, cpu.o, decode.o, sem.o, model.o):
Remove.
(SIM_EXTRA_DEPS): Add eng.h.
sim/lm32/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (arch.o, traps.o, sim-if.o, lm32.o, mloop.o)
(cpu.o, decode.o, sem.o, model.o): Remove.
(SIM_EXTRA_DEPS): Add eng.h.
sim/m32r/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (sim-if.o, arch.o, traps.o, traps-linux.o)
(devices.o, m32r.o, mloop.o, cpu.o, decode.o, sem.o, model.o)
(m32rx.o, mloopx.o, cpux.o, decodex.o, semx.o, modelx.o)
(m32r2.o, mloop2.o, cpu2.o, decode2.o, sem2.o, model2.o): Remove.
(SIM_EXTRA_DEPS): Add eng.h, engx.h, eng2.h.
sim/m68hc11/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (interp.o): Remove.
sim/mips/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (interp.o, m16run.o, micromipsrun.o, multi-run.o):
Remove.
(SIM_EXTRA_DEPS): New variable.
sim/mn10300/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (interp.o): Remove.
(idecode.o op_utils.o semantics.o): Remove.
sim/or1k/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (mloop.o, arch.o, cpu.o, decode.o, sem.o)
(sem-switch.o, model.o): Remove.
sim/rl78/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (err.o, fpu.o, gdb-if.o, load.o, main.o, mem.o)
(reg.o, rl78.o): Remove.
sim/rx/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (err.o, fpu.o, gdb-if.o, load.o, main.o, mem.o)
(misc.o, reg.o, rx.o, syscalls.o, trace.o): Remove.
sim/sh/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (SIM_EXTRA_DEPS): New variable.
(interp.o): Remove.
sim/v850/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (interp.o, simops.o, semantics.o): Remove.
|
|
GDB has required GNU make for quite some time, and this patch applies
this approach to the sim as well. Requiring GNU make means that
automatic dependency tracking can be simple and reliable, and it also
makes other refactorings simpler.
sim/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* m4/sim_ac_common.m4 (SIM_AC_COMMON): Don't check for make.
sim/aarch64/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/arm/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/avr/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/bfin/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/common/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* Make-common.in: Require GNU make.
sim/cr16/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/cris/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/d10v/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/erc32/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/example-synacor/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/frv/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/ft32/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/h8300/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/iq2000/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/lm32/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/m32c/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/m32r/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/m68hc11/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/mcore/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/microblaze/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/mips/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/mn10300/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/moxie/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/msp430/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/or1k/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/pru/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/riscv/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/rl78/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/rx/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/sh/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim/v850/ChangeLog
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
|
|
My scripts weren't updated to use new -I../m4 as the first arg.
|
|
When building with clang, we get:
error: unknown warning option '-Wmissing-parameter-type' [-Werror,-Wunknown-warning-option]
This is because clang only warns by default when encountering an unknown
warning option, and the probe for supported warning flags is done
without -Werror. All flags are therefore accepted by configure, but
then it breaks when actually compiling a source file with -Werror.
This is equivalent to this commit in gdb:
3e019bdc20eb81b91ab5bc774386201b874c0bac
gdb: Use -Werror when checking for (un)supported warning flags
We then see some other compilation errors when building with clang and
-Werror, they can be dealt with later.
|
|
This avoids duplicate tests for functions between common m4, arches,
and any other sources that would trigger func tests.
Also manually delete known duplicate function tests between the m4,
bfin, and v850 ports.
|
|
Explicitly use a known-good shell found by autoconf for executing
additional scripts in genmloop.sh rather than the building user's
shell.
sim/lm32/ChangeLog:
* Makefile.in: Pass -shell to genmloop.sh.
|
|
Every arch handles this the same way, so move it to the common code.
This will also make unifying the sim_cpu structure easier.
|
|
This changes all the non-generated (hand-written) code in sim to use
"new" (post-K&R) style function definitions.
2021-04-08 Tom Tromey <tom@tromey.com>
* bpf.c (bpf_def_model_init): Use new-style declaration.
sim/common/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* cgen-utils.c (RORQI, ROLQI, RORHI, ROLHI, RORSI, ROLSI): Use
new-style declaration.
sim/erc32/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* sis.c (run_sim, main): Use new-style declaration.
* interf.c (run_sim, sim_open, sim_close, sim_load)
(sim_create_inferior, sim_store_register, sim_fetch_register)
(sim_info, sim_stop_reason, flush_windows, sim_do_command): Use
new-style declaration.
* help.c (usage, gen_help): Use new-style declaration.
* func.c (batch, set_regi, set_rega, disp_reg, limcalc)
(reset_stat, show_stat, init_bpt, int_handler, init_signals)
(disp_fpu, disp_regs, disp_ctrl, disp_mem, dis_mem, event)
(init_event, set_int, advance_time, now, wait_for_irq, check_bpt)
(reset_all, sys_reset, sys_halt): Use new-style declaration.
* float.c (get_accex, clear_accex, set_fsr): Use new-style
declaration.
* exec.c (sub_cc, add_cc, log_cc, dispatch_instruction, fpexec)
(chk_asi, execute_trap, check_interrupts, init_regs): Use
new-style declaration.
* erc32.c (init_sim, reset, decode_ersr, mecparerror)
(error_mode, decode_memcfg, decode_wcr, decode_mcr, sim_halt)
(close_port, exit_sim, mec_reset, mec_intack, chk_irq, mec_irq)
(set_sfsr, mec_read, mec_write, init_stdio, restore_stdio)
(port_init, read_uart, write_uart, flush_uart, uarta_tx)
(uartb_tx, uart_rx, uart_intr, uart_irq_start, wdog_intr)
(wdog_start, rtc_intr, rtc_start, rtc_counter_read)
(rtc_scaler_set, rtc_reload_set, gpt_intr, gpt_start)
(gpt_counter_read, gpt_scaler_set, gpt_reload_set, timer_ctrl)
(memory_read, memory_write, get_mem_ptr, sis_memory_write)
(sis_memory_read): Use new-style declaration.
sim/frv/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* sim-if.c (sim_open, frv_sim_close, sim_create_inferior): Use
new-style declaration.
sim/h8300/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* compile.c (cmdline_location): Use new-style declaration.
sim/iq2000/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* sim-if.c (sim_open, sim_create_inferior): Use new-style
declaration.
* iq2000.c (fetch_str): Use new-style declaration.
sim/lm32/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* sim-if.c (sim_open, sim_create_inferior): Use new-style
declaration.
sim/m32r/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* sim-if.c (sim_open, sim_create_inferior): Use new-style
declaration.
|
|
The toplevel, common, and igen dirs all have their own code for
setting up toolchain settings. Unify all of that in a new macro.
|
|
All the scripts were using this implicitly already, so there's no real
change for them, but we want to call it explicitly as the CPP tool is
used to generate nltvals.def.
|
|
This file is quite large and is getting unmanageable. Split it apart
to follow aclocal best practices by putting one-macro-per-file. There
shouldn't be any real functional changes here as can be seen in the
configure script regens.
|
|
Rather than hand maintain m4 includes in various autotool files,
use AC_CONFIG_MACRO_DIRS to declare the relevant search paths.
This simplifies the code, makes it more robust, and cleans out
unused logic from configure.
|
|
These settings might have made sense in darker compiler times, but I
think they're largely obsolete now. Looking through the values that
get used in HDEFINES, it's quite limited, and configure itself should
handle them. If we still need something, we can leverage standard
autoconf macros instead, after we get a clear user report.
TDEFINES was never set anywhere and was always empty, so prune that.
|
|
We want all ports to opt into extra warnings as the default compiler
settings lets a lot slide. Opt all the ports that haven't already in
to the warning system. None of them build with -Werror, so disable
that by default. Hopefully someone finds these important enough to
start fixing at some point.
|
|
Since we require C11 now, we can assume many headers exist, and
clean up all of the conditional includes. It's not like any of
this code actually accounted for the headers not existing, just
whether we could include them.
The strings.h cleanup is a little nuanced: it isn't in C11, but
every use of it in the codebase will include strings.h only if
string.h doesn't exist. Since we now assume the C11 string.h
exists, we'll never include strings.h, so we can delete it.
|
|
This was purged from the tree when we upgraded to autoconf-2.69,
but a few references in the sim tree were missed.
|
|
With GDB requiring a C++11 compiler now, this hopefully shouldn't
be a big deal. It's been 10 years since C11 came out, so should
be plenty of time to upgrade.
This will allow us to start cleaning up random header logic and
many of our non-standard custom types.
|
|
|
|
This matches the equivalent bits in bfd/acinclude.m4
sim/ChangeLog:
* configure.ac: Honor existing CC_FOR_BUILD in environment.
* configure: Regenerate.
sim/aarch64/ChangeLog:
* configure: Regenerate.
sim/arm/ChangeLog:
* configure: Regenerate.
sim/avr/ChangeLog:
* configure: Regenerate.
sim/bfin/ChangeLog:
* configure: Regenerate.
sim/common/ChangeLog:
* acinclude.m4 (SIM_AC_COMMON) Honor existing CC_FOR_BUILD in
environment.
sim/cr16/ChangeLog:
* configure: Regenerate.
sim/cris/ChangeLog:
* configure: Regenerate.
sim/d10v/ChangeLog:
* configure: Regenerate.
sim/erc32/ChangeLog:
* configure: Regenerate.
sim/frv/ChangeLog:
* configure: Regenerate.
sim/ft32/ChangeLog:
* configure: Regenerate.
sim/h8300/ChangeLog:
* configure: Regenerate.
sim/iq2000/ChangeLog:
* configure: Regenerate.
sim/lm32/ChangeLog:
* configure: Regenerate.
sim/m32c/ChangeLog:
* configure: Regenerate.
sim/m32r/ChangeLog:
* configure: Regenerate.
sim/m68hc11/ChangeLog:
* configure: Regenerate.
sim/mcore/ChangeLog:
* configure: Regenerate.
sim/microblaze/ChangeLog:
* configure: Regenerate.
sim/mips/ChangeLog:
* configure: Regenerate.
sim/mn10300/ChangeLog:
* configure: Regenerate.
sim/moxie/ChangeLog:
* configure: Regenerate.
sim/msp430/ChangeLog:
* configure: Regenerate.
sim/rl78/ChangeLog:
* configure: Regenerate.
sim/rx/ChangeLog:
* configure: Regenerate.
sim/sh/ChangeLog:
* configure: Regenerate.
sim/sh64/ChangeLog:
* configure: Regenerate.
sim/v850/ChangeLog:
* configure: Regenerate.
|
|
|
|
The common sim tracing code already handles loading and tracking of
symbols from the target program so that it can show symbol info in
trace/disassembly calls. Once we touch up the trace code and add a
few API callbacks, ports don't need to do loading and searching of
symbol tables themselves anymore.
|
|
Rather than stuffing the command line with a bunch of -D flags, start
moving things to config.h which is managed by autoheader. This makes
the makefile a bit simpler and the build output tighter, and it makes
the migration to automake easier as there are fewer vars to juggle.
We'll want to move the other options out too, but it'll take more work.
|
|
This was imported from the ppc sim, but that was only used to control
a single file, and that is already governed by the hw models. There's
no need to have a sep configure option here, especially since none of
the other sims are using it. Even when the code is enabled, there's
no runtime overhead.
|
|
Currently ports have to call SIM_AC_OPTION_ENVIRONMENT explicitly in
order to make the configure flag available. There's no real reason
to not allow this flag for all ports, so move it to the common sim
macro. This way we get standard behavior across all ports too.
|
|
Currently ports have to call SIM_AC_OPTION_ASSERT explicitly in order
to make the configure flag available, which none of them do. There's
no real reason to not allow this flag for all ports, so move it to the
common sim macro. This way we get standard behavior across all ports.
|
|
We don't have alternative nltvals.def files, so always symlinking
the targ-vals.def file to it doesn't gain us anything. It does
make the build more complicated though and a pain to convert to
something newer (like automake). Drop the symlinking entirely.
In the future, we'll want to explode this file anyways into the
respective arch dirs so things can be selected dynamically at
runtime, so it's not like we'll be bringing this back.
|
|
Currently ports have to call SIM_AC_OPTION_INLINE explicitly in order
to make the configure flag available. There's no real reason to not
allow this flag for all ports, so move it to the common sim macro.
This way we get standard behavior across all ports too.
|
|
These options were never exposed for most sims (just the ppc one),
and they are really only useful on 32-bit x86 systems. Considering
modern systems tend to be 64-bit x86_64 and how well modern compilers
are at optimizing code, these have outlived their usefulness.
|
|
No other sub directory provides such a configuration option, so
drop it from the sim dir as well. This cleans up a good bit of
code in the process.
If people want to use custom flags for just the sim, they can
still run configure+make by hand in the sim subdir and use the
normal CFLAGS settings.
|
|
The common subdir sets up a cconfig.h file to hold checks for the common
code. In practice, most files still end up using config.h instead which
just leads to confusion.
Merge all the configure checks that went into cconfig.h into SIM_AC_COMMON
so we can drop the cconfig.h file altogether. Now there is only a single
config.h file like normal.
|
|
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* sim-options.c (sim_parse_args): Mark argv array const.
* sim-options.h (sim_parse_args): Likewise.
|
|
The compiler/C library should produce reasonable code for htonl/ntohl,
and at least glibc tries pretty hard to always produce good code for
them. This logic only had support for 32-bit x86 systems anymore, and
it's unlikely people were even opting into this, so drop it all.
|
|
Fix a long standing todo where we let getopt write directly to stderr
when an invalid option is passed. Use the sim io funcs instead as they
go through the filtered callbacks that gdb wants.
|
|
The --enable-sim-hostendian flag was purely so people had an escape route
for when cross-compiling. This is because historically, AC_C_BIGENDIAN
did not work in those cases. That was fixed a while ago though, so we can
require that macro everywhere now and simplify a good bit of code.
|
|
Rather than re-invent endian defines, as well as maintain our own list
of OS & arch-specific includes, punt all that logic in favor of the bfd
ones already set up and maintained elsewhere. We already rely on the
bfd library, so leveraging the endian aspect should be fine.
|
|
The iq2000/m32r/sh64 option parsing logic appears to have always been
dead. At least iq2000/sh64 are simply copy & paste rot from m32r.
The lm32 option parsing hack here hasn't been needed for a while -- this
was fixed back in commit 11409fac6b95d71a92848a4499b02d60a4f4c5bb in the
common code.
|
|
The global current_state handle to the current simulator state is a
design idea that was half implemented, but never really cleaned up.
The point was to have a global variable pointing to the state so that
funcs could more quickly & easily access the state anywhere. We've
instead moved in the direction of passing state around everywhere and
don't have any intention of moving back.
I also can't find any references to gdb using this variable, or to
cgen related "dump_regs" functions, both of which were used in the
comments related to this code.
|
|
Pretty much all targets are using this module already, so add it to the
common list of objects. The only oddball out here is cris and that's
because it supports loading via an offset for all the phdrs. We drop
support for that.
|
|
No arch is using this anymore, and we want all new ports using the
hardware framework instead. Punt WITH_DEVICES and the two callbacks
device_io_{read,write}_buffer.
We can also punt the tconfig.h file as no port is using it anymore.
This fixes in-tree builds that get confused by picking up the wrong
one (common/ vs <port>/) caused by commit ae7d0cac8ce971f7108d270c.
Any port that needs to set up a global define can use their own
sim-main.h file that they must provide regardless.
|
|
For targets that process argv in sim_create_inferior, improve the code:
- provide more details in the comment
- make the check for when to re-init more robust
- clean out legacy sim_copy_argv code
This will be cleaned up more in the future when we have a common inferior
creation function, but at least help new ports get it right until then.
|
|
Rather than include this for some targets, set it up so we can build it
all the time via the common code. This makes it easier for targets to
opt into it when they're ready, increases build coverage, and allows us
to centralize much of the logic.
We also get to delete tconfig.h from two more targets -- they were
setting WITH_DEVICES to 0 which has the same behavior as not defining
it at all.
While the SIM_HAVE_MODEL knob is gone, we now have WITH_MODEL_P, but it
is only used by the common sim-model code. We use it to declare dummy
model lists when the arch hasn't created its own.
|
|
The "MACH" and "MODEL" names are a bit generic and collide with symbols
used by other sections of code (like h8300's opcodes). Since these are
sim-specific types, they really should have a "SIM_" prefix.
|
|
This helps us break up tconfig.h more. Any file using this define should
be pulling in sim-main.h already, so things should continue working.
|
|
Most targets already default to loading code via their LMA, but for
a few, this means the default changes from loading VMA to LMA. It's
better to have the different targets be consistent, and allows some
code clean up.
|
|
Now that all arches (for the most part) have moved over, move sim-stop.o,
sim-reason.o, and sim-reg.o to the common object list and out of all the
arch ports.
|
|
Some of the target makefiles listed objects that were already pulled in
via SIM_NEW_COMMON_OBJS. Clean those up.
|
|
Other than the nice advantage of all sims having to declare one fewer
common function, this also fixes leakage in pretty much every sim.
Many were not freeing any resources, and a few were inconsistent as
to the ones they did. Now we have a single module that takes care of
all the logic for us.
Most of the non-cgen based ones could be deleted outright. The cgen
ones required adding a callback to the arch-specific cleanup func.
The few that still have close callbacks are to manage their internal
state.
We do not convert erc32, m32c, ppc, rl78, or rx as they do not use
the common sim core.
|
|
|