aboutsummaryrefslogtreecommitdiff
path: root/sim/frv/configure
AgeCommit message (Collapse)AuthorFilesLines
2014-08-23Fix frv-elf sim, default hardware to off.Hans-Peter Nilsson1-7/+4
At 2974be626, frv-elf fails at the dv_sockser_install declaration in sim/frv/tconfig.in. But, with the trivial #include's added (see other sims tconfig.in, like cris or mn10300), it *still* fails building sim/frv/devices.c because of a missing UART_INCHAR_ADDR. I have no insight into what'd be a valid value, except that there's a definition in m32r, which was probably used as a template with frv not finished. Simulated hardware should not have been be enabled, and was indeed not enabled by default before 94c63d78f (2013-03-23), where it seems to have been enabled for no simulator-specific reason. Except dv-sockser.o wasn't enabled even then: sim/frv/config.in wasn't regenerated, so HAVE_DV_SOCKSER was never defined. Maybe people were fooled by this in sim/frv/Makefile.in at that time (these two lines were later deleted, in 73e76d20): CONFIG_DEVICES = dv-sockser.o CONFIG_DEVICES = (As it seems people have missed it before: the second line overrides the first...) I'm guessing these lines were part of the never-completed hardware-support. Commit 73e76d20 attempted to move the imagined dv-sockser.o from $(CONFIG_DEVICES) to $(frv_extra_objs) but missed that AC_SUBST would only affect @frv_extra_objs@ (not $(frv_extra_objs) per se) so nothing happened regarding sockser: dv-sockser.o was not compiled and HAVE_DV_SOCKSER was not defined. I'm removing the $(frv_extra_objs) too, to avoid confusion. The best action seems to be disabling all hardware support by default again until a specific sim maintainer finishes the work. Make check-sim for frv-elf shows no failures after this. sim/frv: * configure.ac: Default simulator hardware to off again. Remove dead frv_extra_objs substitution. * configure: Regenerate. * Makefile.in: Remove unused frv_extra_objs.
2014-08-19Fix --diable-shared --enable-plugins build breakageAlan Modra1-2/+60
Directories that don't use libtool need to add -ldl (on most *nix hosts) to provide dlopen for libbfd. config/ * plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to LIBS via AC_SEARCH_LIBS. gdb/ * acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl. * config.in: Regenerate. sim/ppc/ * configure.ac: Invoke AC_PLUGINS. * config.in: Regenerate. and regen lots of configure files.
2014-08-15Regenerate sim configury.Roland McGrath1-9/+40
2013-09-23Regenerate sim configure files to pick up support for powerpc64le inAlan Modra1-5/+11
libtool.m4.
2013-06-05sim: use AM_MAINTAINER_MODEMike Frysinger1-13/+28
I noticed the sim code is using an old implementation of the maintainer logic. I cut it over to the new macro (like gdb has been doing). In practice, it makes no difference currently as nothing in the sim tree uses it, but I have a follow up commit for the Blackfin tree that needs it.
2013-03-31sim: frv/m32r: back out hard failure when dv-sockser is not availableMike Frysinger1-7/+4
These sims have optional support for the dv-sockser model, so do not make them hard failures. The Makefile made it seem like they didn't actually support things dynamically, but a further code dive into the source and the Makefile shows that things work out.
2013-03-26sim: rewrite SIM_AC_OPTION_HARDWARE a bit to simplify thingsMike Frysinger1-31/+26
There's no need to put the majority of the logic into the 3rd arg of the AC_ARG_ENABLE. Coupled with the lack of indentation, it makes it hard to follow, error prone to update, and duplicates code (with the 4th arg). So pull the logic out of the 3rd arg and outside of the AC_ARG_ENABLE macro. This allows us to gut the 4th arg entirely, merge with the code that followed the macro, and fix bugs related to the new dv-sockser in the process. Hopefully building the various sims with the default sim-hardware settings, as well as with explicit --{dis,en}able-sim-hardware flags, should all just work now.
2013-03-232013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>Joel Sherrill1-2/+133
* configure.ac: Fail if dv-sockser.o not available. Error when --disable-sim-hardware is specified. * configure: Regenerated.
2012-11-20Fix sim build when configured with --enable-pluginsH.J. Lu1-1/+8960
* common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS condition. * common/acinclude.m4: Define lt_cv_dlopen_libs. * arm/configure: Regenerate. * avr/configure: Regenerate. * bfin/configure: Regenerate. * common/configure: Regenerate. * cr16/configure: Regenerate. * cris/configure: Regenerate. * d10v/configure: Regenerate. * erc32/configure: Regenerate. * frv/configure: Regenerate. * h8300/configure: Regenerate. * igen/configure: Regenerate. * iq2000/configure: Regenerate. * lm32/configure: Regenerate. * m32c/configure: Regenerate. * m32r/configure: Regenerate. * m68hc11/configure: Regenerate. * mcore/configure: Regenerate. * microblaze/configure: Regenerate. * mips/configure: Regenerate. * mn10300/configure: Regenerate. * moxie/configure: Regenerate. * ppc/configure: Regenerate. * rl78/configure: Regenerate. * rx/configure: Regenerate. * sh/configure: Regenerate. * sh64/configure: Regenerate. * testsuite/configure: Regenerate. * v850/configure: Regenerate.
2012-06-15Define PACKAGE macro in all sims' config.h.Joel Brobecker1-0/+12
Some of the common includes in include/gdb such as callback.h include bfd.h. But there was a recent change in bfd-in.h to require that config.h be included before bfd.h can be included: /* PR 14072: Ensure that config.h is included first. */ #if !defined PACKAGE && !defined PACKAGE_VERSION #error config.h must be included before this header #endif PACKAGE_VERSION is always defined by default by the AC_INIT autoconf macro, but PACKAGE isn't. This patch updates the SIM_AC_COMMON macro to define it, and then regenerates all configure scripts and config.in files. sim/common/changeLog: * acinclude.m4 (SIM_AC_COMMON): Define PACKAGE. * config.in, configure: Regenerate. sim/ChangeLog: * configure: Regenerate. sim/arm/ChangeLog: * config.in, configure: Regenerate. sim/avr/ChangeLog: * config.in, configure: Regenerate. sim/bfin/ChangeLog: * config.in, configure: Regenerate. sim/cr16/ChangeLog: * config.in, configure: Regenerate. sim/cris/ChangeLog: * config.in, configure: Regenerate. sim/d10v/ChangeLog: * config.in, configure: Regenerate. sim/erc32/ChangeLog: * config.in, configure: Regenerate. sim/frv/ChangeLog: * config.in, configure: Regenerate. sim/h8300/ChangeLog: * config.in, configure: Regenerate. sim/iq2000/ChangeLog: * config.in, configure: Regenerate. sim/lm32/ChangeLog: * config.in, configure: Regenerate. sim/m32c/ChangeLog: * config.in, configure: Regenerate. sim/m32r/ChangeLog: * config.in, configure: Regenerate. sim/m68hc11/ChangeLog: * config.in, configure: Regenerate. sim/mcore/ChangeLog: * config.in, configure: Regenerate. sim/microblaze/ChangeLog: * config.in, configure: Regenerate. sim/mips/ChangeLog: * config.in, configure: Regenerate. sim/mn10300/ChangeLog: * config.in, configure: Regenerate. sim/moxie/ChangeLog: * config.in, configure: Regenerate. sim/ppc/ChangeLog: * configure: Regenerate. sim/rl78/ChangeLog: * config.in, configure: Regenerate. sim/rx/ChangeLog: * config.in, configure: Regenerate. sim/sh/ChangeLog: * config.in, configure: Regenerate. sim/sh64/ChangeLog: * config.in, configure: Regenerate. sim/v850/ChangeLog: * config.in, configure: Regenerate. sim/testsuite/ChangeLog: * configure: Regenerate.
2012-03-24[PATCH] sim: make sure to include strsignal prototypeMike Frysinger1-121/+183
Before POSIX standardized strsignal(), old systems would hide the prototype unless the normal extension defines were enabled. So use the AC_USE_SYSTEM_EXTENSIONS helper for that. Then make sure we include string.h ourselves in nrun.c rather than relying on implicit includes via other sim headers. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-12-03sim: generate build dependencies on the flyMike Frysinger1-0/+225
Lift the code that GDB is using to generate dependencies on the fly and port it over to the sim. Now people shouldn't have to manually maintain these in their Makefile's. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-18sim: move from common.m4 to SIM_AC_COMMONMike Frysinger1-361/+352
Now that the sourceware tree generally requires autoconf-2.64, update the sim tree to require that too. This allows us to drop the long standing SIM_AC_COMMON/common.m4 workaround as autoconf 2.64+ seems to work for me. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-09Sync Libtool from GCC.Ralf Wildenhues1-1/+1
/: * libtool.m4: Sync from git Libtool. * ltmain.sh: Likewise. * ltoptions.m4: Likewise. * ltversion.m4: Likewise. * lt~obsolete.m4: Likewise. sim/iq2000/: * configure: Regenerate. sim/d10v/: * configure: Regenerate. sim/m32r/: * configure: Regenerate. sim/frv/: * configure: Regenerate. sim/: * avr/configure: Regenerate. * cris/configure: Regenerate. * microblaze/configure: Regenerate. sim/h8300/: * configure: Regenerate. sim/mn10300/: * configure: Regenerate. sim/erc32/: * configure: Regenerate. sim/arm/: * configure: Regenerate. sim/m68hc11/: * configure: Regenerate. sim/lm32/: * configure: Regenerate. sim/sh64/: * configure: Regenerate. sim/v850/: * configure: Regenerate. sim/cr16/: * configure: Regenerate. sim/moxie/: * configure: Regenerate. sim/m32c/: * configure: Regenerate. sim/mips/: * configure: Regenerate. sim/mcore/: * configure: Regenerate. sim/sh/: * configure: Regenerate. gprof/: * Makefile.in: Regenerate. * configure: Regenerate. opcodes/: * Makefile.in: Regenerate. * configure: Regenerate. gas/: * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. ld/: * configure: Regenerate. gdb/testsuite/: * gdb.cell/configure: Regenerate. binutils/: * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. bfd/: * Makefile.in: Regenerate. * configure: Regenerate. bfd/doc/: * Makefile.in: Regenerate.
2009-11-24 * common/aclocal.m4: Add include of ../../config/zlib.m4.Joel Brobecker1-2/+24
* common/common.m4: Use AM_ZLIB to check for zlib support. * ppc/configure.ac: Likewise. * arm/configure, avr/configure, common/configure, cr16/configure, cris/configure, d10v/configure, erc32/configure, frv/configure, h8300/configure, iq2000/configure, lm32/configure, m32c/configure, m32r/configure, m68hc11/configure, mcore/configure, microblaze/configure, mips/configure, mn10300/configure, moxie/configure, ppc/configure, sh/configure, sh64/configure, v850/configure: Regenerate.
2009-08-22Regenerate tree using Autoconf 2.64 and Automake 1.11.Ralf Wildenhues1-3977/+3460
config/: * override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64. /: * configure: Regenerate. etc/: * configure: Regenerate. sim/common/: * config.in: Regenerate. * configure: Likewise. sim/iq2000/: * config.in: Regenerate. * configure: Likewise. sim/d10v/: * config.in: Regenerate. * configure: Likewise. sim/igen/: * config.in: Regenerate. * configure: Likewise. sim/m32r/: * config.in: Regenerate. * configure: Likewise. sim/frv/: * config.in: Regenerate. * configure: Likewise. sim/: * avr/config.in: Regenerate. * avr/configure: Likewise. * configure: Likewise. * cris/config.in: Likewise. * cris/configure: Likewise. sim/h8300/: * config.in: Regenerate. * configure: Likewise. sim/mn10300/: * config.in: Regenerate. * configure: Likewise. sim/ppc/: * config.in: Regenerate. * configure: Likewise. sim/erc32/: * config.in: Regenerate. * configure: Likewise. sim/arm/: * config.in: Regenerate. * configure: Likewise. sim/m68hc11/: * config.in: Regenerate. * configure: Likewise. sim/lm32/: * config.in: Regenerate. * configure: Likewise. sim/sh64/: * config.in: Regenerate. * configure: Likewise. sim/v850/: * config.in: Regenerate. * configure: Likewise. sim/cr16/: * config.in: Regenerate. * configure: Likewise. sim/moxie/: * config.in: Regenerate. * configure: Likewise. sim/m32c/: * config.in: Regenerate. * configure: Likewise. sim/mips/: * config.in: Regenerate. * configure: Likewise. sim/mcore/: * config.in: Regenerate. * configure: Likewise. sim/testsuite/d10v-elf/: * configure: Regenerate. sim/testsuite/: * configure: Regenerate. sim/testsuite/frv-elf/: * configure: Regenerate. sim/testsuite/m32r-elf/: * configure: Regenerate. sim/testsuite/mips64el-elf/: * configure: Regenerate. sim/sh/: * config.in: Regenerate. * configure: Likewise. gold/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * testsuite/Makefile.in: Likewise. gprof/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * configure: Likewise. * gconfig.in: Likewise. opcodes/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gas/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. ld/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gdb/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. * gnulib/Makefile.in: Likewise. gdb/doc/: * configure: Regenerate. gdb/gdbserver/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. gdb/testsuite/: * configure: Regenerate. * gdb.hp/configure: Likewise. * gdb.hp/gdb.aCC/configure: Likewise. * gdb.hp/gdb.base-hp/configure: Likewise. * gdb.hp/gdb.compat/configure: Likewise. * gdb.hp/gdb.defects/configure: Likewise. * gdb.hp/gdb.objdbg/configure: Likewise. * gdb.stabs/configure: Likewise. binutils/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. bfd/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. bfd/doc/: * Makefile.in: Regenerate. readline/: * configure: Regenerate. readline/examples/rlfe/: * configure: Regenerate.
2009-08-22Fixup readline and sim including of override.m4Ralf Wildenhues1-10/+85
readline/examples/rlfe/: * configure.in: m4_include toplevel config/override.m4. * configure: Regenerate. readline/ChangeLog.gdb: * configure.in: m4_include toplevel config/override.m4. * configure: Regenerate. sim/: * configure.ac: m4_include toplevel config/override.m4. * configure: Regenerate. * avr/configure: Regenerate. * cris/configure: Regenerate. sim/common/: * aclocal.m4: m4_include toplevel config/override.m4. * configure: Regenerate. sim/iq2000/: * configure: Regenerate. sim/d10v/: * configure: Regenerate. sim/igen/: * configure: Regenerate. sim/m32r/: * configure: Regenerate. sim/frv/: * configure: Regenerate. sim/h8300/: * configure: Regenerate. sim/mn10300/: * configure: Regenerate. sim/ppc/: * configure: Regenerate. sim/erc32/: * configure: Regenerate. sim/arm/: * configure: Regenerate. sim/m68hc11/: * configure: Regenerate. sim/lm32/: * configure: Regenerate. sim/sh64/: * configure: Regenerate. sim/v850/: * configure: Regenerate. sim/cr16/: * configure: Regenerate. sim/moxie/: * configure: Regenerate. sim/m32c/: * configure: Regenerate. sim/mips/: * configure: Regenerate. sim/mcore/: * configure: Regenerate. sim/sh/: * configure: Regenerate.
2008-07-11 * configure: Regenerate to track ../common/common.m4 changes.Hans-Peter Nilsson1-0/+278
* config.in: Ditto.
2008-06-07sim:Joseph Myers1-1/+173
2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * cris/configure: Regenerate. sim/common: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * aclocal.m4: Include ../../config/acx.m4. * common.m4: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerate. * Make-common.in (LIB_OBJS): Add version.o. (version.c, version.o): New rules. * run.c: Include version.h. (usage): Add help parameter. Print output either to stdout or stderr depending on that parameter. (print_version): New. (main): Check for --help and --version. * run-sim.h (sim_target_display_usage): Add help parameter. * version.h: New. sim/arm: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. * wrapper.c (sim_target_display_usage): Add help parameter. sim/cr16: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/d10v: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/erc32: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/frv: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/h8300: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/iq2000: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/m32c: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/m32r: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/m68hc11: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/mcore: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/mips: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/mn10300: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/ppc: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerated. * Makefile.in (LIB_OBJ): Add version.o. (version.c, version.o): New rules. * psim.c (psim_usage): Add help parameter. Print the bug URL. Exit with code 0 for help. (psim_options): Update calls to psim_usage. Handle --help and --version. * psim.h (psim_usage): Update prototype. * main.c (main): Update psim_usage call. sim/sh: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/sh64: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate. sim/v850: 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> Daniel Jacobowitz <dan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure: Regenerate.
2006-06-13 * common/aclocal.m4: Pass ../../intl to ZW_GNU_GETTEXT_SISTER_DIR.Richard Earnshaw1-2/+3
* common/common.m4: Likewise. * */configure: Regenerate.
2006-06-05common/Daniel Jacobowitz1-2/+84
* aclocal.m4: Use ZW_GNU_GETTEXT_SISTER_DIR. most subdirs/ * configure: Regenerated.
2006-05-31Configury changes: update src repository (binutils, gdb, and rda) to useDaniel Jacobowitz1-2797/+13
config/gettext-sister.m4 instead of the old gettext.m4. Regenerate all affected autotools files. Include intl in gdb releases again.
2005-03-23From common/ChangeLog:Mark Kettenis1-11/+19
* aclocal.m4 Include ../../gettext.m4. (CY_WITH_NLS, CY_GNU_GETTEXT, AM_PATH_PROG_WITH_TEST) (AM_LC_MESSAGES): Remove. * configure: Regenerate. Regenerate all other configures.
2005-01-14Index: arm/ChangeLogAndrew Cagney1-177/+2929
2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: common/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Replace SIM_AC_COMMON with sinclude of common.m4. Add explicit call to AC_CONFIG_HEADER. * common.m4: Delete call to AC_CONFIG_HEADER, update usage. * configure: Re-generate. Index: d10v/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: erc32/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: frv/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: h8300/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: m32r/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: m68hc11/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: mcore/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: mips/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: mn10300/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: sh/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate. Index: v850/ChangeLog 2005-01-14 Andrew Cagney <cagney@gnu.org> * configure.ac: Sinclude aclocal.m4 before common.m4. Add explicit call to AC_CONFIG_HEADER. * configure: Regenerate.
2005-01-12Index: sh/ChangeLogAndrew Cagney1-2999/+413
2005-01-12 Andrew Cagney <cagney@gnu.org> * configure.ac: Update to use ../common/common.m4. * configure: Re-generate. Index: mn10300/ChangeLog 2005-01-12 Andrew Cagney <cagney@gnu.org> * configure.ac: Update to use ../common/common.m4. * configure: Re-generate. Index: d10v/ChangeLog 2005-01-12 Andrew Cagney <cagney@gnu.org> * configure.ac: Update to use ../common/common.m4. * configure: Re-generate. Index: erc32/ChangeLog 2005-01-12 Andrew Cagney <cagney@gnu.org> * configure.ac: Update to use ../common/common.m4. * configure: Re-generate. Index: frv/ChangeLog 2005-01-12 Andrew Cagney <cagney@gnu.org> * configure.ac: Update to use ../common/common.m4. * configure: Re-generate. Index: h8300/ChangeLog 2005-01-12 Andrew Cagney <cagney@gnu.org> * configure.ac: Update to use ../common/common.m4. * configure: Re-generate. Index: m32r/ChangeLog 2005-01-12 Andrew Cagney <cagney@gnu.org> * configure.ac: Update to use ../common/common.m4. * configure: Re-generate. Index: mcore/ChangeLog 2005-01-12 Andrew Cagney <cagney@gnu.org> * configure.ac: Update to use ../common/common.m4. * configure: Re-generate. Index: mips/ChangeLog 2005-01-12 Andrew Cagney <cagney@gnu.org> * configure.ac: Update to use ../common/common.m4. * configure: Re-generate. Index: v850/ChangeLog 2005-01-12 Andrew Cagney <cagney@gnu.org> * configure.ac: Update to use ../common/common.m4. * configure: Re-generate. Index: common/ChangeLog 2005-01-12 Andrew Cagney <cagney@gnu.org> * common.m4: New file, based on of aclocal.m4. Index: arm/ChangeLog 2005-01-12 Andrew Cagney <cagney@gnu.org> * configure.ac: Update to use ../common/common.m4. * configure: Re-generate.
2005-01-12Index: m32r/ChangeLogAndrew Cagney1-40/+45
2005-01-11 Andrew Cagney <cagney@localhost.localdomain> * configure: Regenerated to track ../common/aclocal.m4 changes. Index: m68hc11/ChangeLog 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> * configure: Regenerated to track ../common/aclocal.m4 changes. Index: mcore/ChangeLog 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> * configure: Regenerated to track ../common/aclocal.m4 changes. Index: mips/ChangeLog 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> * configure: Regenerated to track ../common/aclocal.m4 changes. Index: mn10300/ChangeLog 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> * configure: Regenerated to track ../common/aclocal.m4 changes. Index: ppc/ChangeLog 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> * configure.ac: Delete AC_CONFIG_AUX_DIR. * configure: Re-generate. Index: sh/ChangeLog 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> * configure: Regenerated to track ../common/aclocal.m4 changes. Index: testsuite/ChangeLog 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> * configure: Regenerated to track ../common/aclocal.m4 changes. Index: v850/ChangeLog 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> * configure: Regenerated to track ../common/aclocal.m4 changes. Index: erc32/ChangeLog 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> * configure: Regenerated to track ../common/aclocal.m4 changes. Index: frv/ChangeLog 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> * configure: Regenerated to track ../common/aclocal.m4 changes. Index: h8300/ChangeLog 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> * configure: Regenerated to track ../common/aclocal.m4 changes. Index: igen/ChangeLog 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> * configure.ac: Delete AC_CONFIG_AUX_DIR. * configure: Re-generate. Index: d10v/ChangeLog 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> * configure: Regenerated to track ../common/aclocal.m4 changes. Index: ChangeLog 2005-01-11 Andrew Cagney <cagney@gnu.org> * Makefile.in (autoconf-common autoheader-common): Add --force to autoconf and autoheader. (autoconf-common autoheader-common) (autoconf-install autoheader-install): Check for configure.ac, not configure.in. * configure.ac: Delete AC_CONFIG_AUX_DIR. * configure: Re-generate. Index: arm/ChangeLog 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> * configure: Regenerated to track ../common/aclocal.m4 changes. Index: common/ChangeLog 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> * aclocal.m4 (SIM_AC_OUTPUT): Rewrite to use 2.59 macros. * configure: Regenerated to track ../common/aclocal.m4 changes.
2005-01-10Index: arm/ChangeLogAndrew Cagney1-2516/+7009
2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Replace configure.in. Requires autoconf 2.59 and correctly calls AC_CONFIG_SUBDIRS. * configure: Re-generate. Index: common/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * aclocal.m4 (SIM_AC_COMMON): Delete call to AC_CONFIG_AUX_DIR. * configure: Re-generate. Index: d10v/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: erc32/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: frv/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: h8300/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: igen/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: m32r/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: m68hc11/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: mcore/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: mips/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: mn10300/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: ppc/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: sh/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: testsuite/d10v-elf/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: testsuite/frv-elf/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: testsuite/m32r-elf/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: testsuite/mips64el-elf/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: testsuite/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: v850/ChangeLog 2005-01-07 Andrew Cagney <cagney@gnu.org> * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate.
2004-12-07 * configure: Regenerate for ../common/aclocal.m4 update.Hans-Peter Nilsson1-2/+9
2003-08-29New simulator for Fujitsu frv contributed by Red Hat.Dave Brolley1-0/+4315
generated by cgit v1.1 at 2024-07-30 23:46:25 +0000