aboutsummaryrefslogtreecommitdiff
path: root/opcodes
AgeCommit message (Collapse)AuthorFilesLines
2015-02-11Fixes a problem with the RL78 disassembler which would incorrectly ↵Nick Clifton3-93/+93
disassemble [HL+0] as [HL]. * rl78-decode.opc: Add 'a' attribute to instructions that support [HL+0] addressing. * rl78-decode.c: Regenerate. * rl78-dis.c (print_insn_rl78): Display the offset in [HL+0] addresses.
2015-02-10opcodes/microblaze: Rename 'or', 'and', 'xor' to avoid C++ conflictPedro Alves3-4/+13
Building GDB as a C++ program, we see: In file included from gdb/microblaze-tdep.c:37:0: gdb/../opcodes/../opcodes/microblaze-opcm.h: At global scope: gdb/../opcodes/../opcodes/microblaze-opcm.h:32:51: error: expected identifier before ‘or’ token ncget, ncput, muli, bslli, bsrai, bsrli, mului, or, and, xor, ^ gdb/../opcodes/../opcodes/microblaze-opcm.h:32:51: error: expected ‘}’ before ‘or’ token gdb/../opcodes/../opcodes/microblaze-opcm.h:32:51: error: expected unqualified-id before ‘or’ token gdb/../opcodes/../opcodes/microblaze-opcm.h:60:1: error: expected declaration before ‘}’ token }; ^ opcodes/ChangeLog: 2015-02-10 Pedro Alves <palves@redhat.com> Tom Tromey <tromey@redhat.com> * microblaze-opcm.h (or, and, xor): Rename to microblaze_or, microblaze_and, microblaze_xor. * microblaze-opc.h (opcodes): Adjust.
2015-01-29NDS32: Set branch instruction to relaxable.Kuan-Lin Chen1-1/+2
Relaxable fragments can be relaxed when there are alignment requirements. Besides, insert a dummy fragment in the final to make sure that all alignment is traversed. Finally, convert these fragments in md_convert_frag with relax_table.
2015-01-28FT32 initial supportAlan Modra9-0/+292
FT32 is a new 32-bit RISC core developed by FTDI for embedded applications. * configure.ac: Add FT32 support. * configure: Regenerate. bfd/ * Makefile.am: Add FT32 files. * archures.c (enum bfd_architecture): Add bfd_arch_ft32. (bfd_mach_ft32): Define. (bfd_ft32_arch): Declare. (bfd_archures_list): Add bfd_ft32_arch. * config.bfd: Handle FT32. * configure.ac: Likewise. * cpu-ft32.c: New file. * elf32-ft32.c: New file. * reloc.c (BFD_RELOC_FT32_10, BFD_RELOC_FT32_20, BFD_RELOC_FT32_17, BFD_RELOC_FT32_18): Define. * targets.c (_bfd_target_vector): Add ft32_elf32_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * readelf.c: Add FT32 support. gas/ * Makefile.am: Add FT32 files. * config/tc-ft32.c: New file. * config/tc-ft32.h: New file. * configure.tgt: Add FT32 support. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/testsuite/ * gas/ft32/ft32.exp: New file. * gas/ft32/insn.d: New file. * gas/ft32/insn.s: New file. include/ * dis-asm.h (print_insn_ft32): Declare. include/elf/ * common.h (EM_FT32): Define. * ft32.h: New file. include/opcode/ * ft32.h: New file. ld/ * Makefile.am: Add FT32 files. * configure.tgt: Handle FT32 target. * emulparams/elf32ft32.sh: New file. * scripttempl/ft32.sc: New file. * Makefile.in: Regenerate. opcodes/ * Makefile.am: Add FT32 files. * configure.ac: Handle FT32. * disassemble.c (disassembler): Call print_insn_ft32. * ft32-dis.c: New file. * ft32-opc.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2015-01-28NDS32/opcodes: Add new system registers.Kuan-Lin Chen2-2/+14
2015-01-16S/390: Add support for IBM z13.Andreas Krebbel5-530/+1203
- 32 128 bit vector registers (overlapping with the existing 16 64 bit floating point registers) - vector double instructions - vector integer instructions - scalar vector instructions (allowing to have more floating point registers for scalar operations) - vector string instructions gas/ChangeLog: * config/tc-s390.c (struct pd_reg): Remove. (pre_defined_registers): Remove. (REG_NAME_CNT): Remove. (reg_name_search): Calculate the register number instead of doing a lookup. (register_name, tc_s390_regname_to_dw2regnum): Adopt to the new reg_name_search signature. (s390_parse_cpu): Support the new arch string z13. (s390_insert_operand): Support for vector registers with the extra field for the fifth bit of each vector register operand. (md_gather_operand): Adjust to the new handling of optional parameters. * doc/as.texinfo: Document the z13 cpu string. gas/testsuite/ChangeLog: * gas/s390/esa-g5.d: Add a variant without the optional operand. * gas/s390/esa-g5.s: Likewise. * gas/s390/esa-z9-109.d: Likewise. * gas/s390/esa-z9-109.s: Likewise. * gas/s390/zarch-z9-109.d: Likewise. * gas/s390/zarch-z9-109.s: Likewise. * gas/s390/zarch-z10.d: For variants with a zero optional argument it is not dumped by objdump anymore. * gas/s390/zarch-zEC12.d: Likewise. * gas/s390/zarch-z13.d: New file. * gas/s390/zarch-z13.s: New file. * gas/s390/s390.exp: Run the test for the z13 files. include/opcode/ChangeLog: * s390.h (s390_opcode_cpu_val): Add S390_OPCODE_Z13. ld/testsuite/ChangeLog: * ld-s390/tlsbin.dd: The nopr register operand is optional and not printed if 0 anymore. opcodes/ChangeLog: * s390-dis.c (s390_extract_operand): Support vector register operands. (s390_print_insn_with_opcode): Support new operands types and add new handling of optional operands. * s390-mkopc.c (s390_opcode_mode_val, s390_opcode_cpu_val): Remove and include opcode/s390.h instead. (struct op_struct): New field `flags'. (insertOpcode, insertExpandedMnemonic): New parameter `flags'. (dumpTable): Dump flags. (main): Parse flags from the s390-opc.txt file. Add z13 as cpu string. * s390-opc.c: Add new operands types, instruction formats, and instruction masks. (s390_opformats): Add new formats for .insn. * s390-opc.txt: Add new instructions.
2015-01-02Regenerate Makeile.in file for copyright updateAlan Modra1-1/+1
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra265-1150/+1168
2014-12-27Limit moxie sto/ldo offsets to 16 bitsAnthony Green3-16/+22
2014-12-24Add mul.x and umul.x instructions to moxie portAnthony Green2-9/+14
2014-12-16Add in a JALRC alias and fix the NAL instruction.Matthew Fortune2-1/+7
opcodes/ * mips-opc.c (mips_builtin_opcodes): Add JALRC alias for JIALC. Remove the operand from NAL. gas/testsuite/ * gas/mips/r6.s: Test JALRC and NAL * gas/mips/r6-n32.d: Add expected output for JALRC and NAL. * gas/mips/r6-n64.d: Likewise. * gas/mips/r6.d: Likewise.
2014-12-12Add zex instructions for moxie portAnthony Green2-2/+6
2014-12-06Add Visium support to opcodesEric Botcazou9-0/+886
include/ * dis-asm.h (print_insn_visium): Declare. include/opcode/ * visium.h: New file. opcodes/ * configure.ac: Add Visium support. * configure: Regenerate. * Makefile.am (TARGET_LIBOPCODES_CFILES): Add visium-dis.c and visium-opc.c. * Makefile.in: Regenerate. * disassemble.c (ARCH_visium): Define if ARCH_all. (disassembler): Deal with bfd_arch_visium if ARCH_visium. * visium-dis.c: New file. * visium-opc.c: Likewise. * po/POTFILES.in: Regenerate.
2014-11-30Power4 should treat mftb as extended mfspr mnemonicAlan Modra2-6/+11
On further reading of ISA manual it appears gas should have been treating mftb and mftbu as extended mnemonics for mfspr, for ISA 2.03 and later. opcodes/ * ppc-opc.c (powerpc_opcodes): Make mftb* generate mfspr for power4 and later. gas/testsuite/ * gas/ppc/a2.d: Update for mftb change. * gas/ppc/476.d: Likewise.
2014-11-28Remove broken nios2 assembler dwim support.Sandra Loosemore2-4/+9
2014-11-28 Sandra Loosemore <sandra@codesourcery.com> include/opcode/ * nios2.h (NIOS2_INSN_ADDI, NIOS2_INSN_ANDI): Delete. (NIOS2_INSN_ORI, NIOS2_INSN_XORI): Delete. (NIOS2_INSN_OPTARG): Renumber. opcodes/ * nios2-opc.c (nios2_r1_opcodes): Remove deleted attributes from descriptors. gas/ * config/tc-nios2.c (can_evaluate_expr, get_expr_value): Delete. (output_addi, output_andi, output_ori, output_xori): Delete. (md_assemble): Remove calls to deleted functions. gas/testsuite/ * gas/nios2/nios2.exp: Make "movi" a list test. * gas/nios2/movi.s: Adjust comments, add another case. * gas/nios2/movi.l: New. * gas/nios2/movi.d: Delete.
2014-11-28Don't deprecate powerpc mftb insnAlan Modra2-7/+15
mftb is marked phased out in the architecture manual, but we can keep it as an extended mnemonic for mftbl. * ppc-opc.c (powerpc_opcodes <mftb>): Don't deprecate for power7. (TB): Delete. (insert_tbr, extract_tbr): Validate tbr number.
2014-11-24Update libtool.m4 from GCC trunkH.J. Lu2-2/+6
* libtool.m4: Updated from GCC trunk. bfd/ * configure: Regenerated. binutils/ * configure: Regenerated. gas/ * configure: Regenerated. gprof/ * configure: Regenerated. ld/ * configure: Regenerated. opcodes/ * configure: Regenerated.
2014-11-17Add AVX512VBMI instructionsIlya Tocar8-5445/+5730
gas/ * config/tc-i386.c (cpu_arch): Add .avx512vbmi. * doc/c-i386.texi: Document it. opcodes/ * i386-dis-evex.c (evex_table): Add vpermi2b, vpermt2b, vpermb, vpmultishiftqb. * i386-dis.c (PREFIX enum): Add PREFIX_EVEX_0F3883, EVEX_W_0F3883_P_2. * i386-gen.c (cpu_flag_init): Add CPU_AVX512VBMI_FLAGS. (cpu_flags): Add CpuAVX512VBMI. * i386-opc.h (enum): Add CpuAVX512VBMI. (i386_cpu_flags): Add cpuavx512vbmi. * i386-opc.tbl: Add vpmadd52luq, vpmultishiftqb, vpermb, vpermi2b, vpermt2b. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. /gas/testsuite/ * gas/i386/i386.exp: Run new tests. * gas/i386/avx512vbmi-intel.d: New file. * gas/i386/avx512vbmi.d: Likewise. * gas/i386/avx512vbmi.s: Likewise. * gas/i386/avx512vbmi_vl-intel.d: Likewise. * gas/i386/avx512vbmi_vl.d: Likewise. * gas/i386/avx512vbmi_vl.s: Likewise. * gas/i386/x86-64-avx512vbmi-intel.d: Likewise. * gas/i386/x86-64-avx512vbmi.d: Likewise. * gas/i386/x86-64-avx512vbmi.s: Likewise. * gas/i386/x86-64-avx512vbmi_vl-intel.d: Likewise. * gas/i386/x86-64-avx512vbmi_vl.d: Likewise. * gas/i386/x86-64-avx512vbmi_vl.s: Likewise.
2014-11-17Add AVX512IFMA instructionsIlya Tocar8-5512/+5677
gas/ * config/tc-i386.c (cpu_arch): Add .avx512ifma. * doc/c-i386.texi: Document it. opcodes/ * i386-dis-evex.c (evex_table): Add vpmadd52luq, vpmadd52huq. * i386-dis.c (PREFIX enum): Add PREFIX_EVEX_0F38B4, PREFIX_EVEX_0F38B5. * i386-gen.c (cpu_flag_init): Add CPU_AVX512IFMA_FLAGS. (cpu_flags): Add CpuAVX512IFMA. * i386-opc.h (enum): Add CpuAVX512IFMA. (i386_cpu_flags): Add cpuavx512ifma. * i386-opc.tbl: Add vpmadd52huq, vpmadd52luq. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. /gas/testsuite/ * gas/i386/i386.exp: Run new tests. * gas/i386/avx512ifma-intel.d: New file. * gas/i386/avx512ifma.d: Likewise. * gas/i386/avx512ifma.s: Likewise. * gas/i386/avx512ifma_vl-intel.d: Likewise. * gas/i386/avx512ifma_vl.d: Likewise. * gas/i386/avx512ifma_vl.s: Likewise. * gas/i386/x86-64-avx512ifma-intel.d: Likewise. * gas/i386/x86-64-avx512ifma.d: Likewise. * gas/i386/x86-64-avx512ifma.s: Likewise. * gas/i386/x86-64-avx512ifma_vl-intel.d: Likewise. * gas/i386/x86-64-avx512ifma_vl.d: Likewise. * gas/i386/x86-64-avx512ifma_vl.s: Likewise.
2014-11-17Add pcommit instructionIlya Tocar7-5262/+10575
gas/ * config/tc-i386.c (cpu_arch): Add .pcommit. * doc/c-i386.texi: Document it. /opcodes * i386-dis.c (PREFIX enum): Add PREFIX_RM_0_0FAE_REG_7. (prefix_table): Add pcommit. * i386-gen.c (cpu_flag_init): Add CPU_PCOMMIT_FLAGS. (cpu_flags): Add CpuPCOMMIT. * i386-opc.h (enum): Add CpuPCOMMIT. (i386_cpu_flags): Add cpupcommit. * i386-opc.tbl: Add pcommit. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. /gas/testsuite/ * gas/i386/i386.exp: Run new tests. * gas/i386/pcommit-intel.d: New file. * gas/i386/pcommit.d: Likewise. * gas/i386/pcommit.s: Likewise. * gas/i386/x86-64-pcommit-intel.d: Likewise. * gas/i386/x86-64-pcommit.d: Likewise. * gas/i386/x86-64-pcommit.s: Likewise.
2014-11-17Add clwb instructionIlya Tocar7-5260/+5310
gas/ * config/tc-i386.c (cpu_arch): Add .clwb. * doc/c-i386.texi: Document it. opcodes/ * i386-dis.c (PREFIX enum): Add PREFIX_0FAE_REG_6. (prefix_table): Add clwb. * i386-gen.c (cpu_flag_init): Add CPU_CLWB_FLAGS. (cpu_flags): Add CpuCLWB. * i386-opc.h (enum): Add CpuCLWB. (i386_cpu_flags): Add cpuclwb. * i386-opc.tbl: Add clwb. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. gas/testsuite/ * gas/i386/i386.exp: Run new tests. * gas/i386/clwb-intel.d: New file. * gas/i386/clwb.d: Likewise. * gas/i386/clwb.s: Likewise. * gas/i386/x86-64-clwb-intel.d: Likewise. * gas/i386/x86-64-clwb.d: Likewise. * gas/i386/x86-64-clwb.s: Likewise.
2014-11-06Add mach parameter to nios2_find_opcode_hash.Sandra Loosemore2-3/+9
2014-11-06 Sandra Loosemore <sandra@codesourcery.com> include/opcode/ * nios2.h (nios2_find_opcode_hash): Add mach parameter to declaration. Fix obsolete comment. opcodes/ * nios2-dis.c (nios2_find_opcode_hash): Add mach parameter. (nios2_disassemble): Adjust call to nios2_find_opcode_hash. gas/ * config/tc-nios2.c (nios2_diagnose_overflow): Adjust call to nios2_find_opcode_hash.
2014-11-03Import updated translations supplied by the Translation Project.Nick Clifton2-146/+372
bfd, binutils, gprof, opcodes: * po/fi.po: Updated Finnish translation. binutils: * po/sv.po: Updated Swedish translation. gprof: * po/hu.po: New Hungarian translation.
2014-10-31MIPS: Add Octeon 3 supportNaveen H.S3-3/+29
binutils: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * readelf.c (print_mips_isa_ext): Print the value of Octeon3. gas: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3. (mips_cpu_info_table): Octeon3 enables virt ase. * doc/c-mips.texi: Document octeon3 as an acceptable value for -march=. gas/testsuite: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * gas/mips/mips.exp: Add support for Octeon3 architecture. Also add in support for running Octeon3 tests. * gas/mips/octeon3.d: New test. * gas/mips/octeon3.s: New test source. opcodes: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * mips-dis.c (mips_arch_choices): Add octeon3. * mips-opc.c (IOCT): Include INSN_OCTEON3. (IOCT2): Likewise. (IOCT3): New define. (IVIRT): New define. (mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0, tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti IVIRT instructions. Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another operand for IOCT3. bfd: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * archures.c: Add octeon3 for mips target. * bfd-in2.h: Regenerate. * bfd/cpu-mips.c: Define I_mipsocteon3. nfo_struct): Add octeon3 support. * bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for octeon3. (mips_set_isa_flags): Add support for octeon3. (bfd_mips_isa_ext): Add bfd_mach_mips_octeon3. (mips_mach_extensions): Make bfd_mach_mips_octeon3 an extension of bfd_mach_mips_octeon2. (print_mips_isa_ext): Print the value of Octeon3.
2014-10-29Updated/new translations provided by the Translations Project.Nick Clifton2-270/+1059
2014-10-23Refactoring/cleanup of nios2 opcodes and assembler code.Sandra Loosemore3-451/+580
2014-10-23 Sandra Loosemore <sandra@codesourcery.com> include/opcode/ * nios2.h (enum iw_format_type): New. (struct nios2_opcode): Update comments. Add size and format fields. (NIOS2_INSN_OPTARG): New. (REG_NORMAL, REG_CONTROL, REG_COPROCESSOR): New. (struct nios2_reg): Add regtype field. (GET_INSN_FIELD, SET_INSN_FIELD): Delete. (IW_A_LSB, IW_A_MSB, IW_A_SZ, IW_A_MASK): Delete. (IW_B_LSB, IW_B_MSB, IW_B_SZ, IW_B_MASK): Delete. (IW_C_LSB, IW_C_MSB, IW_C_SZ, IW_C_MASK): Delete. (IW_IMM16_LSB, IW_IMM16_MSB, IW_IMM16_SZ, IW_IMM16_MASK): Delete. (IW_IMM26_LSB, IW_IMM26_MSB, IW_IMM26_SZ, IW_IMM26_MASK): Delete. (IW_OP_LSB, IW_OP_MSB, IW_OP_SZ, IW_OP_MASK): Delete. (IW_OPX_LSB, IW_OPX_MSB, IW_OPX_SZ, IW_OPX_MASK): Delete. (IW_SHIFT_IMM5_LSB, IW_SHIFT_IMM5_MSB): Delete. (IW_SHIFT_IMM5_SZ, IW_SHIFT_IMM5_MASK): Delete. (IW_CONTROL_REGNUM_LSB, IW_CONTROL_REGNUM_MSB): Delete. (IW_CONTROL_REGNUM_SZ, IW_CONTROL_REGNUM_MASK): Delete. (OP_MASK_OP, OP_SH_OP): Delete. (OP_MASK_IOP, OP_SH_IOP): Delete. (OP_MASK_IRD, OP_SH_IRD): Delete. (OP_MASK_IRT, OP_SH_IRT): Delete. (OP_MASK_IRS, OP_SH_IRS): Delete. (OP_MASK_ROP, OP_SH_ROP): Delete. (OP_MASK_RRD, OP_SH_RRD): Delete. (OP_MASK_RRT, OP_SH_RRT): Delete. (OP_MASK_RRS, OP_SH_RRS): Delete. (OP_MASK_JOP, OP_SH_JOP): Delete. (OP_MASK_IMM26, OP_SH_IMM26): Delete. (OP_MASK_RCTL, OP_SH_RCTL): Delete. (OP_MASK_IMM5, OP_SH_IMM5): Delete. (OP_MASK_CACHE_OPX, OP_SH_CACHE_OPX): Delete. (OP_MASK_CACHE_RRS, OP_SH_CACHE_RRS): Delete. (OP_MASK_CUSTOM_A, OP_SH_CUSTOM_A): Delete. (OP_MASK_CUSTOM_B, OP_SH_CUSTOM_B): Delete. (OP_MASK_CUSTOM_C, OP_SH_CUSTOM_C): Delete. (OP_MASK_CUSTOM_N, OP_SH_CUSTOM_N): Delete. (OP_<insn>, OPX_<insn>, OP_MATCH_<insn>, OPX_MATCH_<insn>): Delete. (OP_MASK_<insn>, OP_MASK): Delete. (GET_IW_A, GET_IW_B, GET_IW_C, GET_IW_CONTROL_REGNUM): Delete. (GET_IW_IMM16, GET_IW_IMM26, GET_IW_OP, GET_IW_OPX): Delete. Include nios2r1.h to define new instruction opcode constants and accessors. (nios2_builtin_opcodes): Rename to nios2_r1_opcodes. (bfd_nios2_num_builtin_opcodes): Rename to nios2_num_r1_opcodes. (bfd_nios2_num_opcodes): Rename to nios2_num_opcodes. (NUMOPCODES, NUMREGISTERS): Delete. * nios2r1.h: New file. opcodes/ * nios2-opc.c (nios2_builtin_regs): Add regtype field initializers. (nios2_builtin_opcodes): Rename to nios2_r1_opcodes. Use new MATCH_R1_<insn> and MASK_R1_<insn> macros in initializers. Add size and format initializers. Merge 'b' arguments into 'j'. (NIOS2_NUM_OPCODES): Adjust definition. (bfd_nios2_num_builtin_opcodes): Rename to nios2_num_r1_opcodes. (nios2_opcodes): Adjust. (bfd_nios2_num_opcodes): Rename to nios2_num_opcodes. * nios2-dis.c (INSNLEN): Update comment. (nios2_hash_init, nios2_hash): Delete. (OPCODE_HASH_SIZE): New. (nios2_r1_extract_opcode): New. (nios2_disassembler_state): New. (nios2_r1_disassembler_state): New. (nios2_init_opcode_hash): Add state parameter. Adjust to use it. (nios2_find_opcode_hash): Use state object. (bad_opcode): New. (nios2_print_insn_arg): Add op parameter. Use it to access format. Remove 'b' case. (nios2_disassemble): Remove special case for nop. Remove hard-coded instruction size. gas/ * config/tc-nios2.c (nios2_insn_infoS): Add constant_bits field. (nios2_arg_infoS, nios2_arg_hash, nios2_arg_lookup): Delete. (nios2_control_register_arg_p): Delete. (nios2_coproc_reg): Delete. (nios2_relax_frag): Remove hard-coded instruction size. (md_convert_frag): Use new insn accessor macros. (nios2_diagnose_overflow): Remove hard-coded instruction size. (md_apply_fix): Likewise. (bad_opcode): New. (nios2_parse_reg): New. (nios2_assemble_expression): Remove prev_reloc parameter. Adjust uses and callers. (nios2_assemble_arg_c): New. (nios2_assemble_arg_d): New. (nios2_assemble_arg_s): New. (nios2_assemble_arg_t): New. (nios2_assemble_arg_i): New. (nios2_assemble_arg_u): New. (nios2_assemble_arg_o): New. (nios2_assemble_arg_j): New. (nios2_assemble_arg_l): New. (nios2_assemble_arg_m): New. (nios2_assemble_args): New. (nios2_assemble_args_dst): Delete. (nios2_assemble_args_tsi): Delete. (nios2_assemble_args_tsu): Delete. (nios2_assemble_args_sto): Delete. (nios2_assemble_args_o): Delete. (nios2_assemble_args_is): Delete. (nios2_assemble_args_m): Delete. (nios2_assemble_args_s): Delete. (nios2_assemble_args_tis): Delete. (nios2_assemble_args_dc): Delete. (nios2_assemble_args_cs): Delete. (nios2_assemble_args_ds): Delete. (nios2_assemble_args_ldst): Delete. (nios2_assemble_args_none): Delete. (nios2_assemble_args_dsj): Delete. (nios2_assemble_args_d): Delete. (nios2_assemble_args_b): Delete. (nios2_arg_info_structs): Delete. (NIOS2_NUM_ARGS): Delete. (nios2_consume_arg): Remove insn parameter. Use new macros. Don't check register arguments here. Remove 'b' case. (nios2_consume_separator): Move check for missing separators to... (nios2_parse_args): ...here. Remove special case for optional arguments. (output_insn): Avoid using hard-coded insn size. (output_ubranch): Likewise. (output_cbranch): Likewise. (output_call): Use new macros. (output_addi): Likewise. (output_ori): Likewise. (output_xori): Likewise. (output_movia): Likewise. (md_begin): Remove nios2_arg_info_structs initialization. (md_assemble): Initialize constant_bits field. Use nios2_parse_args instead of looking up parse function in hash table. gdb/ * nios2-tdep.c (nios2_analyze_prologue): Use new instruction field accessors and constants from nios2 opcodes update. (nios2_get_next_pc): Likewise.
2014-10-21ppc: enable msgclr and msgsnd on Power8Jan Beulich2-2/+6
According to my reading of the spec it was an oversight for them to not having got enabled when Power8 support got added.
2014-10-17opcodes, elf: annotate instructions with HWCAP2_VIS3B.Jose E. Marchesi2-12/+13
This patch annotates the following SPARC instructions as VIS3B instructions: ldx *, %efsr, fpadd64, fpsub64, fpcmpule8, fpcmpune8, fpcmpugt8, fpcmpueq8. It also improves the documentation of the VIS3B capability in several headers. Tested in sparc64-unknown-linux-gnu and sparc-unknown-linux-gnu. No visible regressions. opcodes/ChangeLog: 2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-opc.c (sparc-opcodes): Annotate several instructions with the HWCAP2_VIS3B hwcap. include/opcodes/ChangeLog: 2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc.h (HWCAP2_VIS3B): Documentation improved. include/elf/ChangeLog: 2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc.h (ELF_SPARC_HWCAP2_VIS3B): Documentation improved.
2014-10-17opcodes: fix several misplaced hwcap entries.Jose E. Marchesi2-13/+18
This patch fixes the hwcap entries in `sparc-opcodes' (which were incorrectly located in the flags field) for the following instructions: wr r,r,%sys_tick wr r,i,%sys_tick wr r,r,%sys_tick_cmpr wr r,i,%sys_tick_cmpr edge8n edge8ln edge16n edge16ln edge32n edge32ln bmask bshuffle siam Tested in sparc-unknown-linux-gnu and sparc64-unknown-linux-gnu. No visible regressions. opcodes/ChangeLog: 2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-opc.c (sparc-opcodes): Fix several misplaced hwcap entries.
2014-10-15Bump bfd version.Tristan Gingold2-10/+14
bfd/ 2014-10-15 Tristan Gingold <gingold@adacore.com> * version.m4: Bump version to 2.25.51 * configure: Regenerate. binutils/ 2014-10-15 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. gas/ 2014-10-15 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. gprof/ 2014-10-15 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. ld/ 2014-10-15 Tristan Gingold <gingold@adacore.com> * configure: Regenerate. opcodes/ 2014-10-15 Tristan Gingold <gingold@adacore.com> * configure: Regenerate.
2014-10-09This is a series of patches that add support for the SPARC M7 cpu toJose E. Marchesi3-1441/+1507
binutils. They were discussed and approved here: https://sourceware.org/ml/binutils/2014-10/msg00038.html
2014-09-22Ignore MOD field for control/debug register moveH.J. Lu2-32/+19
This patch ignores the MOD field in control/debug register move instructions. gas/testsuite/ * gas/i386/cdr.d: New file. * gas/i386/cdr.s: Likewise. * gas/i386/x86-64-cdr.d: Likewise. * gas/i386/i386.exp: Run cdr and x86-64-cdr. opcodes/ * i386-dis.c (MOD_0F20): Removed. (MOD_0F21): Likewise. (MOD_0F22): Likewise. (MOD_0F23): Likewise. (dis386_twobyte): Replace MOD_0F20, MOD_0F21, MOD_0F22 and MOD_0F23 with "movZ". (mod_table): Remove MOD_0F20, MOD_0F21, MOD_0F22 and MOD_0F23. (OP_R): Check mod/rm byte and call OP_E_register.
2014-09-16NDS32/opcodes: Add audio ISA extension and modify the disassemble implemnt.Kuan-Lin Chen4-1842/+2327
First, add nds32 audio ISA extension including opcodes and registers. Second, redesign the disassemble implement. The original disassemble decode instruction opcode using switch-case. It is hard to synchronize when adding new instructions. Therefore, the new implement reuses nds32_opcodes to dump the instructions.
2014-09-15Add support for MIPS R6.Andrew Bennett4-362/+786
bfd/ * aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6. * archures.c (bfd_architecture): Likewise. * bfd-in2.h (bfd_architecture): Likewise. (bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. * cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6. * elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2 R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. * elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. * elfn32-mips.c: Likewise. * elfxx-mips.c (MIPSR6_P): New define. (mipsr6_exec_plt_entry): New array. (hi16_reloc_p): Add support for R_MIPS_PCHI16. (lo16_reloc_p): Add support for R_MIPS_PCLO16. (aligned_pcrel_reloc_p): New function. (mips_elf_relocation_needs_la25_stub): Add support for relocs: R_MIPS_PC21_S2 and R_MIPS_PC26_S2. (mips_elf_calculate_relocation): Add support for relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6. (mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16. (_bfd_mips_elf_check_relocs): Add support for relocs: R_MIPS_PC21_S2 and R_MIPS_PC26_S2. (_bfd_mips_elf_relocate_section): Add a check for unaligned pc relative relocs. (_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6 plt entry. (mips_set_isa_flags): Add support for mips32r6 and mips64r6. (_bfd_mips_elf_print_private_bfd_data): Likewise. (mips_32bit_flags_p): Add support for mips32r6. * libbfd.h (bfd_reloc_code_real_names): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. * reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. binutils/ * readelf.c (get_machine_flags): Add support for mips32r6 and mips64r6. elfcpp/ * mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants. gas/ * config/tc-mips.c (mips_nan2008): New static global. (mips_flag_nan2008): Removed. (LL_SC_FMT): New define. (COP12_FMT): Updated. (ISA_IS_R6): New define. (ISA_HAS_64BIT_REGS): Add mips64r6. (ISA_HAS_DROR): Likewise. (ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6. (ISA_HAS_ROR): Likewise. (ISA_HAS_ODD_SINGLE_FPR): Likewise. (ISA_HAS_MXHC1): Likewise. (hilo_interlocks): Likewise. (md_longopts): Likewise. (ISA_HAS_LEGACY_NAN): New define. (options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6. (mips_ase): Add field rem_rev. (mips_ases): Updated to add which ISA an ASE was removed in. (mips_isa_rev): Add support for mips32r6 and mips64r6. (mips_check_isa_supports_ase): Add support to check if an ASE has been removed in the specified MIPS ISA revision. (validate_mips_insn): Skip '-' character. (macro_build): Likewise. (mips_check_options): Prevent R6 working with fp32, mips16, micromips, or branch relaxation. (file_mips_check_options): Set R6 floating point registers to 64 bit. Also deal with the nan2008 option. (limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. (match_check_prev_operand): New static function. (match_same_rs_rt_operand): New static function. (match_non_zero_reg_operand): New static function. (match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. (insns_between): Added case to deal with forbidden slots. (append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2 and BFD_RELOC_MIPS_26_PCREL_S2. (match_insn): Add support for operands -A, -B, +' and +". Also skip '-' character. (mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo. (md_parse_option): Add support for mips32r6 and mips64r6. Also update the nan option handling. (md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2. (mips_force_relocation): Prevent forced relaxation for MIPS r6. (md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (s_mipsset): Add support for mips32r6 and mips64r6. (s_nan): Update to support the new nan2008 framework. (tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (mips_elf_final_processing): Updated to use the mips_nan2008. (mips_cpu_info_table): Add entries for mips32r6 and mips64r6. (macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref macros for R6. (mips_fix_adjustable): Make PC relative R6 relocations relative to the symbol and not the section. * configure.ac: Add support for mips32r6 and mips64r6. * configure: Regenerate. * doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line options. * doc/as.texinfo: Likewise. gas/testsuite/ * gas/mips/24k-triple-stores-1.s: If testing for r6 prevent non-supported instructions from being tested. * gas/mips/24k-triple-stores-2.s: Likewise. * gas/mips/24k-triple-stores-3.s: Likewise. * gas/mips/24k-triple-stores-6.s: Likewise. * gas/mips/beq.s: Likewise. * gas/mips/eva.s: Likewise. * gas/mips/ld-zero-3.s: Likewise. * gas/mips/mips32-cp2.s: Likewise. * gas/mips/mips32.s: Likewise. * gas/mips/mips4.s: Likewise. * gas/mips/add.s: Don't test the add instructions if r6, and add padding. * gas/mips/add.d: Check for a triple dot not a nop at the end of the disassembly output. * gas/mips/micromips@add.d: Likewise. * gas/mips/mipsr6@24k-branch-delay-1.d: New file. * gas/mips/mipsr6@24k-triple-stores-1.d: New file. * gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file. * gas/mips/mipsr6@24k-triple-stores-2.d: New file. * gas/mips/mipsr6@24k-triple-stores-3.d: New file. * gas/mips/mipsr6@24k-triple-stores-6.d: New file. * gas/mips/mipsr6@add.d: New file. * gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file. * gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file. * gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file. * gas/mips/mipsr6@beq.d: New file. * gas/mips/mipsr6@bge.d: New file. * gas/mips/mipsr6@bgeu.d: New file. * gas/mips/mipsr6@blt.d: New file. * gas/mips/mipsr6@bltu.d: New file. * gas/mips/mipsr6@branch-misc-1.d: New file. * gas/mips/mipsr6@branch-misc-2-64.d: New file. * gas/mips/mipsr6@branch-misc-2pic-64.d: New file. * gas/mips/mipsr6@branch-misc-4-64.d: New file. * gas/mips/mipsr6@cache.d: New file. * gas/mips/mipsr6@eva.d: New file. * gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file. * gas/mips/mipsr6@jal-svr4pic.d: New file. * gas/mips/mipsr6@ld-zero-2.d: New file. * gas/mips/mipsr6@ld-zero-3.d: New file. * gas/mips/mipsr6@loc-swap-dis.d: New file. * gas/mips/mipsr6@mips32-cp2.d: New file. * gas/mips/mipsr6@mips32-imm.d: New file. * gas/mips/mipsr6@mips32.d: New file. * gas/mips/mipsr6@mips32r2.d: New file. * gas/mips/mipsr6@mips4-fp.d: New file. * gas/mips/mipsr6@mips4-fp.l: New file. * gas/mips/mipsr6@mips4-fp.s: New file. * gas/mips/mipsr6@mips4.d: New file. * gas/mips/mipsr6@mips5-fp.d: New file. * gas/mips/mipsr6@mips5-fp.l: New file. * gas/mips/mipsr6@mips5-fp.s: New file. * gas/mips/mipsr6@mips64.d: New file. * gas/mips/mipsr6@msa-branch.d: New file. * gas/mips/mipsr6@msa.d: New file. * gas/mips/mipsr6@pref.d: New file. * gas/mips/mipsr6@relax-swap3.d: New file. * gas/mips/r6-64-n32.d: New file. * gas/mips/r6-64-n64.d: New file. * gas/mips/r6-64-removed.l: New file. * gas/mips/r6-64-removed.s: New file. * gas/mips/r6-64.s: New file. * gas/mips/r6-attr-none-double.d: New file. * gas/mips/r6-n32.d: New file. * gas/mips/r6-n64.d: New file. * gas/mips/r6-removed.l: New file. * gas/mips/r6-removed.s: New file. * gas/mips/r6.d: New file. * gas/mips/r6.s: New file. * gas/mips/mipsr6@mips32-dsp.d: New file. * gas/mips/mipsr6@mips32-dspr2.d: New file. * gas/mips/mipsr6@mips32r2-ill.l: New file. * gas/mips/mipsr6@mips32r2-ill.s: New file. * gas/mips/cache.s: Add r6 instruction varients. * gas/mips/mips.exp: Add support for the mips32r6 and mips64r6 architectures. Also prevent non r6 supported tests from running. Finally, add in support for running the new r6 tests. (run_dump_test_arch): Add support for mipsr6 tests. (run_list_test_arch): Add support for using files of the form arch@testname.l . include/elf/ * mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (E_MIPS_ARCH_32R6): New define. (E_MIPS_ARCH_64R6): New define. include/opcode/ * mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6 instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +; (mips_check_prev_operand): New struct. (INSN2_FORBIDDEN_SLOT): New define. (INSN_ISA32R6): New define. (INSN_ISA64R6): New define. (INSN_UPTO32R6): New define. (INSN_UPTO64R6): New define. (mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6. (ISA_MIPS32R6): New define. (ISA_MIPS64R6): New define. (CPU_MIPS32R6): New define. (CPU_MIPS64R6): New define. (cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6. ld/ * ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6. opcodes/ * mips-dis.c (mips_arch_choices): Add entries for mips32r6 and mips64r6. (parse_mips_dis_option): Allow MSA and virtualization support for mips64r6. (mips_print_arg_state): Add fields dest_regno and seen_dest. (mips_seen_register): New function. (print_insn_arg): Refactored code to use mips_seen_register function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out the register rather than aborting. (print_insn_args): Add length argument. Add code to correctly calculate the instruction address for pc relative instructions. (validate_insn_args): New static function. (print_insn_mips): Prevent jalx disassembling for r6. Use validate_insn_args. (print_insn_micromips): Use validate_insn_args. all the arguments are valid. * mips-formats.h (PREV_CHECK): New define. * mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +; (RD_pc): New define. (FS): New define. (I37): New define. (I69): New define. (mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded MIPS R6 instructions from MIPS R2 instructions.
2014-09-10Properly handle suffix for iret and sysretH.J. Lu2-21/+59
gas/testsuite/ * gas/i386/i386.exp: Run suffix-intel, x86-64-suffix and x86-64-suffix-intel. * gas/i386/suffix.s: Add tests for iret and sysret. * gas/i386/suffix.d: Updated. * gas/i386/suffix-intel.d: New file. * gas/i386/x86-64-suffix-intel.d: Likewise. * gas/i386/x86-64-suffix.d: Likewise. * gas/i386/x86-64-suffix.s: Likewise. opcodes/ * i386-dis.c (dis386): Replace "P" with "%LP" for iret and sysret. (putop): Handle "%LP".
2014-09-03[PATCH/AArch64] Generic support for all system registers using mrs and msrJiong Wang3-101/+28
2014-09-03 Jiong Wang <jiong.wang@arm.com> opcode/ * aarch64-tbl.h (aarch64_opcode_table): Update encoding for mrs/msr. * aarch64-dis-2.c: Update auto-generated file. gas/ * config/tc-aarch64.c (parse_sys_reg): Remove the restriction on op0 field. gas/testsuite/ * gas/aarch64/illegal.s: Update testcase. * gas/aarch64/illegal.d: Likewise. * gas/aarch64/sysreg-1.s: Likewise. * gas/aarch64/sysreg-1.d: Likewise.
2014-09-03[PATCH/AArch64] Implement LSE featureJiong Wang10-223/+2033
2014-09-03 Jiong Wang <jiong.wang@arm.com> gas/ * config/tc-aarch64.c (parse_operands): Recognize PAIRREG. (aarch64_features): Add entry for lse extension. include/opcode/ * aarch64.h (AARCH64_FEATURE_LSE): New feature added. (aarch64_opnd): Add AARCH64_OPND_PAIRREG. (aarch64_insn_class): Add lse_atomic. (F_LSE_SZ): New field added. (opcode_has_special_coder): Recognize F_LSE_SZ. opcode/ * aarch64-tbl.h (QL_R4NIL): New qualifiers. (aarch64_feature_lse): New feature added. (LSE): New Added. (aarch64_opcode_table): New LSE instructions added. Improve descriptions for ldarb/ldarh/ldar. (aarch64_opcode_table): Describe PAIRREG. * aarch64-opc.h (aarch64_field_kind): Add FLD_lse_sz. * aarch64-opc.c (fields): Add entry for F_LSE_SZ. (aarch64_print_operand): Recognize PAIRREG. (operand_general_constraint_met_p): Check reg pair constraints for CASP instructions. * aarch64-dis.c (aarch64_ext_regno_pair): New extractor for paired reg. (do_special_decoding): Recognize F_LSE_SZ. * aarch64-asm.c (do_special_encoding): Recognize F_LSE_SZ. gas/testsuite/ * gas/aarch64/lse-atomic.d: New. * gas/aarch64/lse-atomic.s: Likewise. * gas/aarch64/illegal-lse.d: Likewise. * gas/aarch64/illegal-lse.l: Likewise. * gas/aarch64/illegal-lse.s: Likewise. * gas/aarch64/diagnostic.s: Check processor feature detect for lse instruction. * gas/aarch64/diagnostic.l: Likewise.
2014-08-26MIPS: Make the CODE10 operand code consistent between ISAsMaciej W. Rozycki2-5/+11
This change moves the microMIPS 10-bit uninterpreted immediate code embedded at bits 25..16 in the SYSCALL, WAIT, SDBBP and HYPCALL instructions from `B' over to `+J' which is the operand code used in the standard MIPS instruction set for a similar code embedded at bits 20..11, currently used by HYPCALL only in that set. opcodes/ * micromips-opc.c (decode_micromips_operand): Rename `B' to `+J'. (micromips_opcodes): Use "+J" in place of "B" for "hypcall", "sdbbp", "syscall" and "wait". include/opcode/ * mips.h: Document the move of `MICROMIPSOP_*_CODE10' from `B' over to `+J'.
2014-08-22ARM/opcodes: Fix negative hexadecimal offset disassemblyMaciej W. Rozycki2-0/+8
2014-08-21 Nathan Sidwell <nathan@codesourcery.com> Maciej W. Rozycki <macro@codesourcery.com> opcodes/ * arm-dis.c (print_arm_address): Negate the GPR-relative offset returned if the U bit is set. 2014-08-21 Paul Brook <paul@codesourcery.com> gas/testsuite/ * gas/arm/arch7a-mp.d: Adjust according to `print_arm_address' offset fix. * gas/arm/arch7r-mp.d: Likewise.
2014-08-21MIPS/opcodes: Remove microMIPS 48-bit LI instructionMaciej W. Rozycki2-4/+5
The 48-bit LI instruction encoding has been removed from the microMIPS ISA and no implementation ever made that included it. * micromips-opc.c (micromips_opcodes): Remove #ifdef-ed out 48-bit "li" encoding.
2014-08-19This patch set mainly aims at improving the S/390 disassembler'sAndreas Arnez2-134/+184
readability and also fixes some minor issues. S/390: Split disassembler routine into smaller functions S/390: Fix disassembler's treatment of signed/unsigned operands S/390: Fix off-by-one error in disassembler initialization S/390: Simplify opcode search loop in disassembler S/390: Drop function pointer dereferences in disassembler S/390: Various minor simplifications in disassembler
2014-08-14opcodes: blackfin: convert ad-hoc ints to bfd_booleanMike Frysinger2-21/+31
These various int fields are being used as booleans, so change to the existing bfd_boolean style. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2014-08-14opcodes: blackfin: simplify decode_CC2stat_0 logicMike Frysinger2-41/+11
These multiple if statements can be condensed down into a single if statement and an array of strings. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2014-08-14opcodes: blackfin: avoid duplicate memory readsMike Frysinger2-6/+10
Rather than reading the same memory twice, pass the value back up. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2014-08-13opcodes: blackfin: push down global stateMike Frysinger2-43/+83
The variables used to track insn state should be pushed down into the private_data structure to avoid pollution across calls. This also happens to fix the output when hitting comments/invalid insns which needs to tweak a gas test. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2014-08-13opcodes: blackfin: do not force align the PCMike Frysinger2-1/+14
If the user gives us an unaligned PC, then dump an error as such. Otherwise if you try to disassemble at an odd address, the output will look weird (it'll read one byte earlier). This can be seen in one of the gas tests where data is in the middle of .text, so move the data to .data like it should be in the first place. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2014-08-13opcodes: blackfin: handle memory read errorsMike Frysinger2-19/+45
The current code ignores memory read errors which isn't a great idea. So add a helper function which takes care of error checking and update the code to use that. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2014-07-29[MIPS] Rename COPROC related macrosMatthew Fortune3-134/+142
gas/ * config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout. include/opcode/ * mips.h (INSN_LOAD_COPROC_DELAY): Rename to... (INSN_LOAD_COPROC): New define. (INSN_COPROC_MOVE_DELAY): Rename to... (INSN_COPROC_MOVE): New define. opcodes/ * micromips-opc.c (COD): Rename throughout to... (CM): New define, update to use INSN_COPROC_MOVE. (LCD): Rename throughout to... (LC): New define, update to use INSN_LOAD_COPROC. * mips-opc.c: Likewise.
2014-07-29[MIPS] Implement O32 FPXX, FP64 and FP64A ABI extensionsMatthew Fortune3-24/+34
Specification: https://dmz-portal.mips.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking include/ * elf/mips.h (PT_MIPS_ABIFLAGS, SHT_MIPS_ABIFLAGS): Define. (Val_GNU_MIPS_ABI_FP_OLD_64): Rename from Val_GNU_MIPS_ABI_FP_64. (Val_GNU_MIPS_ABI_FP_64): Redefine. (Val_GNU_MIPS_ABI_FP_XX): Define. (Elf_External_ABIFlags_v0, Elf_Internal_ABIFlags_v0): New structures. (AFL_REG_NONE, AFL_REG_32, AFL_REG_64, AFL_REG_128): Define. (AFL_ASE_DSP, AFL_ASE_DSPR2, AFL_ASE_EVA, AFL_ASE_MCU): Likewise. (AFL_ASE_MDMX, AFL_ASE_MIPS3D, AFL_ASE_MT, AFL_ASE_SMARTMIPS): Likewise. (AFL_ASE_VIRT, AFL_ASE_MSA, AFL_ASE_MIPS16): Likewise. (AFL_ASE_MICROMIPS, AFL_ASE_XPA): Likewise. (AFL_EXT_XLR, AFL_EXT_OCTEON2, AFL_EXT_OCTEONP): Likewise. (AFL_EXT_LOONGSON_3A, AFL_EXT_OCTEON, AFL_EXT_5900): Likewise. (AFL_EXT_4650, AFL_EXT_4010, AFL_EXT_4100, AFL_EXT_3900): Likewise. (AFL_EXT_10000, AFL_EXT_SB1, AFL_EXT_4111, AFL_EXT_4120): Likewise. (AFL_EXT_5400, AFL_EXT_5500, AFL_EXT_LOONGSON_2E): Likewise. (AFL_EXT_LOONGSON_2F): Likewise. (bfd_mips_elf_swap_abiflags_v0_in): Prototype. (bfd_mips_elf_swap_abiflags_v0_out): Likewise. (bfd_mips_isa_ext): Likewise. bfd/ * elfxx-mips.c (ABI_O32_P, MIPS_ELF_ABIFLAGS_SECTION_NAME_P): New macro. (mips_elf_obj_tdata): Add abiflags and abiflags_valid fields. (bfd_mips_elf_swap_abiflags_v0_in): New function. (bfd_mips_elf_swap_abiflags_v0_out): Likewise. (_bfd_mips_elf_section_from_shdr): Handle SHT_MIPS_ABIFLAGS. (_bfd_mips_elf_fake_sections): Likewise. (_bfd_mips_elf_always_size_sections): Handle .MIPS.abiflags. (_bfd_mips_elf_additional_program_headers): Account for new PT_MIPS_ABIFLAGS program header. (_bfd_mips_elf_modify_segment_map): Create PT_MIPS_ABIFLAGS segment and associate with .MIPS.abiflags. (_bfd_mips_elf_gc_mark_extra_sections): New function. (bfd_mips_isa_ext, update_mips_abiflags_isa): New static function. (infer_mips_abiflags): Likewise. (_bfd_mips_elf_final_link): Handle .MIPS.abiflags. (mips_32bit_flags_p): Moved higher. (mips_elf_merge_obj_attributes, _bfd_mips_fp_abi_string): Error checking for FP ABIs. (_bfd_mips_elf_merge_private_bfd_data): Restructure and add abiflags checks. Check EF_MIPS_FP64 flag consistency. (print_mips_ases, print_mips_isa_ext): New static function. (print_mips_fp_abi_value, get_mips_reg_size): Likewise. (_bfd_mips_elf_print_private_bfd_data): Display abiflags data. (_bfd_mips_post_process_headers): Set EI_ABIVERSION = 3 for Val_GNU_MIPS_ABI_FP_64 or Val_GNU_MIPS_ABI_FP_64A. * elfxx-mips.h (_bfd_mips_elf_gc_mark_extra_sections): New prototype. * elf32-mips.c (elf_backend_gc_mark_extra_sections): Implement. * elfn32-mips.c (elf_backend_gc_mark_extra_sections): Implement. * elf64-mips.c (elf_backend_gc_mark_extra_sections): Implement. binutils/ * readelf.c (get_mips_segment_type): Display name for PT_MIPS_ABIFLAGS. (get_mips_section_type_name): Display name for SHT_MIPS_ABIFLAGS. (display_mips_gnu_attribute): Abstracted fp abi printing to... (print_mips_fp_abi_value): New static function. Handle new FP ABIs. (print_mips_ases, print_mips_isa_ext): New static functions. (get_mips_reg_size): Likewise. (process_mips_specific): Display abiflags data. elfcpp/ * elfcpp.h (PT_MIPS_ABIFLAGS): New program header type. gas/ * config/tc-mips.c (mips_flags_frag): New static global. (struct mips_set_options): Add oddspreg field. (file_mips_opts, mips_opts): Initialize oddspreg. (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and Loongson-3a. (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg and -mno-odd-spreg options. (md_begin): Create .MIPS.abiflags section. (fpabi_incompatible_with, fpabi_requires): New static function. (check_fpabi): Likewise. (mips_check_options): Handle fp=xx and oddspreg restrictions. (file_mips_check_options): Set oddspreg by default for fp=xx. (mips_oddfpreg_ok): Re-write function. (check_regno): Check odd numbered registers regardless of FPR size. For fp != 32 use as_bad instead of as_warn. (match_float_constant): Rewrite check regarding FP register width. Add support for generating constants when MXHC1 is present. Handle fp=xx to comply with the ABI. (macro): Update M_LI_DD similarly to match_float_constant. Generate MTHC1 when available. Check that correct code can be generated for fp=xx and fp=64 ABIs. (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg options. (mips_convert_ase_flags): New static function. (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64 to determine when to add the EF_MIPS_FP64 flag. Populate the .MIPS.abiflags section. (md_mips_end): Update .gnu_attribute based on command line and .module as applicable. Use check_fpabi to ensure .gnu.attribute and command line/.module options are consistent. * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new -mfpxx, -modd-spreg and -mno-odd-spreg options. * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg, gnu_attribute values and FP ABIs. ld/ * emulparams/elf32bmip.sh: Add .MIPS.abiflags. * emulparams/elf32bmipn32-defs.sh: Likewise. * emulparams/elf64bmip-defs.sh: Likewise. opcodes/ * micromips-opc.c (COD, LCD) New macros. (cfc1, ctc1): Remove FP_S attribute. (dmfc1, mfc1, mfhc1): Add LCD attribute. (dmtc1, mtc1, mthc1): Add COD attribute. * mips-opc.c (cfc1, cftc1, ctc, cttc1): Remove FP_S attribute. binutils/testsuite/ * binutils-all/readelf.s: Account for .MIPS.abiflags and .gnu.attributes. * binutils-all/readelf.ss-tmips: Likewise. * binutils-all/strip-3.d: Likewise. gas/testsuite/ * gas/mips/attr-gnu-4-0.d: New. * gas/mips/attr-gnu-4-0.s: Likewise. * gas/mips/attr-gnu-4-1-mfp32.l: Likewise. * gas/mips/attr-gnu-4-1-mfp32.s: Likewise. * gas/mips/attr-gnu-4-1-mfp64.l: Likewise. * gas/mips/attr-gnu-4-1-mfp64.s: Likewise. * gas/mips/attr-gnu-4-1-mfpxx.s: Likewise. * gas/mips/attr-gnu-4-1-msingle-float.l: Likewise. * gas/mips/attr-gnu-4-1-msingle-float.s: Likewise. * gas/mips/attr-gnu-4-1-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-1-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-1.d: Likewise. * gas/mips/attr-gnu-4-1.s: Likewise. * gas/mips/attr-gnu-4-2-mdouble-float.l: Likewise. * gas/mips/attr-gnu-4-2-mdouble-float.s: Likewise. * gas/mips/attr-gnu-4-2-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-2-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-2.d: Likewise. * gas/mips/attr-gnu-4-2.s: Likewise. * gas/mips/attr-gnu-4-3-mhard-float.l: Likewise. * gas/mips/attr-gnu-4-3-mhard-float.s: Likewise. * gas/mips/attr-gnu-4-3.d: Likewise. * gas/mips/attr-gnu-4-3.s: Likewise. * gas/mips/attr-gnu-4-4.l: Likewise. * gas/mips/attr-gnu-4-4.s: Likewise. * gas/mips/attr-gnu-4-5-64.l: Likewise. * gas/mips/attr-gnu-4-5-64.s: Likewise. * gas/mips/attr-gnu-4-5.d: Likewise. * gas/mips/attr-gnu-4-5.l: Likewise. * gas/mips/attr-gnu-4-5.s: Likewise. * gas/mips/attr-gnu-4-6-64.l: Likewise. * gas/mips/attr-gnu-4-6-64.s: Likewise. * gas/mips/attr-gnu-4-6.d: Likewise. * gas/mips/attr-gnu-4-6.l: Likewise. * gas/mips/attr-gnu-4-6.s: Likewise. * gas/mips/attr-gnu-4-6-msingle-float.l: Likewise. * gas/mips/attr-gnu-4-6-msingle-float.s: Likewise. * gas/mips/attr-gnu-4-6-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-6-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-6-noodd.l: Likewise. * gas/mips/attr-gnu-4-6-noodd.s: Likewise. * gas/mips/attr-gnu-4-7-64.l: Likewise. * gas/mips/attr-gnu-4-7-64.s: Likewise. * gas/mips/attr-gnu-4-7-msingle-float.l: Likewise. * gas/mips/attr-gnu-4-7-msingle-float.s: Likewise. * gas/mips/attr-gnu-4-7-msoft-float.l: Likewise. * gas/mips/attr-gnu-4-7-msoft-float.s: Likewise. * gas/mips/attr-gnu-4-7-odd.l: Likewise. * gas/mips/attr-gnu-4-7-odd.s: Likewise. * gas/mips/attr-gnu-4-7.d: Likewise. * gas/mips/attr-gnu-4-7.l: Likewise. * gas/mips/attr-gnu-4-7.s: Likewise. * gas/mips/attr-none-double.d: Likewise. * gas/mips/attr-none-o32-fp64.d: Likewise. * gas/mips/attr-none-o32-fp64-nooddspreg.d * gas/mips/attr-none-o32-fpxx.d: Likewise. * gas/mips/attr-none-single-float.d: Likewise. * gas/mips/attr-none-soft-float.d: Likewise. * gas/mips/elf_arch_mips32r3.d: Likewise. * gas/mips/elf_arch_mips32r5.d: Likewise. * gas/mips/elf_arch_mips64r3.d: Likewise. * gas/mips/elf_arch_mips64r5.d: Likewise. * gas/mips/li-d.d: Likewise. * gas/mips/li-d.s: Likewise. * gas/mips/module-check-warn.l: Likewise. * gas/mips/module-check-warn.s: Likewise. * gas/mips/module-check.d: Likewise. * gas/mips/module-check.s: Likewise. * gas/mips/module-mfp32.d: Likewise. * gas/mips/module-mfp32.s: Likewise. * gas/mips/module-mfp64.d: Likewise. * gas/mips/module-mfp64.s: Likewise. * gas/mips/module-mfp64-noodd.d: Likewise. * gas/mips/module-mfp64-noodd.s: Likewise. * gas/mips/module-mfpxx.d: Likewise. * gas/mips/module-mfpxx.s: Likewise. * gas/mips/module-msingle-float.d: Likewise. * gas/mips/module-msingle-float.s: Likewise. * gas/mips/module-msoft-float.d: Likewise. * gas/mips/module-msoft-float.s: Likewise. * gas/mips/module-set-mfpxx.d: Likewise. * gas/mips/module-set-mfpxx.s: Likewise. * gas/mips/fpxx-oddfpreg.d: Likewise. * gas/mips/fpxx-oddfpreg.l: Likewise. * gas/mips/fpxx-oddfpreg.s: Likewise. * gas/mips/no-odd-spreg.d: Likewise. * gas/mips/odd-spreg.d: Likewise. * gas/elf/section2.e-mips: Adjust expected output. * gas/mips/attr-gnu-abi-fp-1.d: Likewise. * gas/mips/attr-gnu-abi-msa-1.d: Likewise. * gas/mips/call-nonpic-1.d: Likewise. * gas/mips/elf_arch_mips1.d: Likewise. * gas/mips/elf_arch_mips2.d: Likewise. * gas/mips/elf_arch_mips3.d: Likewise. * gas/mips/elf_arch_mips32.d: Likewise. * gas/mips/elf_arch_mips32r2.d: Likewise. * gas/mips/elf_arch_mips4.d: Likewise. * gas/mips/elf_arch_mips5.d: Likewise. * gas/mips/elf_arch_mips64.d: Likewise. * gas/mips/elf_arch_mips64r2.d: Likewise. * gas/mips/elf_ase_micromips-2.d: Likewise. * gas/mips/elf_ase_micromips.d: Likewise. * gas/mips/elf_ase_mips16-2.d: Likewise. * gas/mips/elf_ase_mips16.d: Likewise. * gas/mips/module-defer-warn1.d: Likewise. * gas/mips/module-override.d: Likewise. * gas/mips/n32-consec.d: Likewise. * gas/mips/nan-2008-1.d: Likewise. * gas/mips/nan-2008-2.d: Likewise. * gas/mips/nan-2008-3.d: Likewise. * gas/mips/nan-2008-4.d: Likewise. * gas/mips/nan-legacy-1.d: Likewise. * gas/mips/nan-legacy-2.d: Likewise. * gas/mips/nan-legacy-3.d: Likewise. * gas/mips/nan-legacy-4.d: Likewise. * gas/mips/nan-legacy-5.d: Likewise. * gas/mips/tmips16-e.d: Likewise. * gas/mips/tmips16-f.d: Likewise. * gas/mips/tmipsel16-e.d: Likewise. * gas/mips/tmipsel16-f.d: Likewise. * gas/testsuite/gas/mips/mips.exp: Add new tests. ld/testsuite/ * ld-mips-elf/abiflags-strip1-ph.d: New. * ld-mips-elf/abiflags-strip2-ph.d: Likewise. * ld-mips-elf/abiflags-strip3-ph.d: Likewise. * ld-mips-elf/abiflags-strip4-ph.d: Likewise. * ld-mips-elf/abiflags-strip5-ph.d: Likewise. * ld-mips-elf/abiflags-strip6-ph.d: Likewise. * ld-mips-elf/abiflags-strip7-ph.d: Likewise. * ld-mips-elf/abiflags-strip8-ph.d: Likewise. * ld-mips-elf/abiflags-strip9-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-0-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-0-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-0-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-06.d: Likewise. * ld-mips-elf/attr-gnu-4-07.d: Likewise. * ld-mips-elf/attr-gnu-4-08.d: Likewise. * ld-mips-elf/attr-gnu-4-1-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-1-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-1-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-16.d: Likewise. * ld-mips-elf/attr-gnu-4-17.d: Likewise. * ld-mips-elf/attr-gnu-4-18.d: Likewise. * ld-mips-elf/attr-gnu-4-2-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-2-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-2-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-26.d: Likewise. * ld-mips-elf/attr-gnu-4-27.d: Likewise. * ld-mips-elf/attr-gnu-4-28.d: Likewise. * ld-mips-elf/attr-gnu-4-3-n32-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-3-n64-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-3-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-36.d: Likewise. * ld-mips-elf/attr-gnu-4-37.d: Likewise. * ld-mips-elf/attr-gnu-4-38.d: Likewise. * ld-mips-elf/attr-gnu-4-4-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-46.d: Likewise. * ld-mips-elf/attr-gnu-4-47.d: Likewise. * ld-mips-elf/attr-gnu-4-48.d: Likewise. * ld-mips-elf/attr-gnu-4-5-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-50.d: Likewise. * ld-mips-elf/attr-gnu-4-52.d: Likewise. * ld-mips-elf/attr-gnu-4-53.d: Likewise. * ld-mips-elf/attr-gnu-4-54.d: Likewise. * ld-mips-elf/attr-gnu-4-55.d: Likewise. * ld-mips-elf/attr-gnu-4-56.d: Likewise. * ld-mips-elf/attr-gnu-4-57.d: Likewise. * ld-mips-elf/attr-gnu-4-58.d: Likewise. * ld-mips-elf/attr-gnu-4-6-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-6.s: Likewise. * ld-mips-elf/attr-gnu-4-60.d: Likewise. * ld-mips-elf/attr-gnu-4-61.d: Likewise. * ld-mips-elf/attr-gnu-4-62.d: Likewise. * ld-mips-elf/attr-gnu-4-63.d: Likewise. * ld-mips-elf/attr-gnu-4-64.d: Likewise. * ld-mips-elf/attr-gnu-4-65.d: Likewise. * ld-mips-elf/attr-gnu-4-66.d: Likewise. * ld-mips-elf/attr-gnu-4-67.d: Likewise. * ld-mips-elf/attr-gnu-4-68.d: Likewise. * ld-mips-elf/attr-gnu-4-7-ph.d: Likewise. * ld-mips-elf/attr-gnu-4-7.s: Likewise. * ld-mips-elf/attr-gnu-4-70.d: Likewise. * ld-mips-elf/attr-gnu-4-71.d: Likewise. * ld-mips-elf/attr-gnu-4-72.d: Likewise. * ld-mips-elf/attr-gnu-4-73.d: Likewise. * ld-mips-elf/attr-gnu-4-74.d: Likewise. * ld-mips-elf/attr-gnu-4-75.d: Likewise. * ld-mips-elf/attr-gnu-4-76.d: Likewise. * ld-mips-elf/attr-gnu-4-77.d: Likewise. * ld-mips-elf/attr-gnu-4-78.d: Likewise. * ld-mips-elf/attr-gnu-4-8.s: Likewise. * ld-mips-elf/attr-gnu-4-81.d: Likewise. * ld-mips-elf/empty.s: Likewise. * ld-mips-elf/attr-gnu-4-00.d: Adjust expected output. * ld-mips-elf/attr-gnu-4-01.d: Likewise. * ld-mips-elf/attr-gnu-4-02.d: Likewise. * ld-mips-elf/attr-gnu-4-03.d: Likewise. * ld-mips-elf/attr-gnu-4-04.d: Likewise. * ld-mips-elf/attr-gnu-4-05.d: Likewise. * ld-mips-elf/attr-gnu-4-10.d: Likewise. * ld-mips-elf/attr-gnu-4-11.d: Likewise. * ld-mips-elf/attr-gnu-4-14.d: Likewise. * ld-mips-elf/attr-gnu-4-15.d: Likewise. * ld-mips-elf/attr-gnu-4-2.s: Likewise. * ld-mips-elf/attr-gnu-4-20.d: Likewise. * ld-mips-elf/attr-gnu-4-22.d: Likewise. * ld-mips-elf/attr-gnu-4-24.d: Likewise. * ld-mips-elf/attr-gnu-4-25.d: Likewise. * ld-mips-elf/attr-gnu-4-3.s: Likewise. * ld-mips-elf/attr-gnu-4-30.d: Likewise. * ld-mips-elf/attr-gnu-4-33.d: Likewise. * ld-mips-elf/attr-gnu-4-34.d: Likewise. * ld-mips-elf/attr-gnu-4-35.d: Likewise. * ld-mips-elf/attr-gnu-4-40.d: Likewise. * ld-mips-elf/attr-gnu-4-41.d: Likewise. * ld-mips-elf/attr-gnu-4-42.d: Likewise. * ld-mips-elf/attr-gnu-4-43.d: Likewise. * ld-mips-elf/attr-gnu-4-44.d: Likewise. * ld-mips-elf/attr-gnu-4-45.d: Likewise. * ld-mips-elf/attr-gnu-4-5.s: Likewise. * ld-mips-elf/attr-gnu-4-51.d: Likewise. * ld-mips-elf/attr-gnu-8-00.d: Likewise. * ld-mips-elf/attr-gnu-8-01.d: Likewise. * ld-mips-elf/attr-gnu-8-02.d: Likewise. * ld-mips-elf/attr-gnu-8-10.d: Likewise. * ld-mips-elf/attr-gnu-8-11.d: Likewise. * ld-mips-elf/attr-gnu-8-20.d: Likewise. * ld-mips-elf/attr-gnu-8-22.d: Likewise. * ld-mips-elf/jalx-2.dd: Likewise. * ld-mips-elf/mips16-pic-1.gd: Likewise. * ld-mips-elf/mips16-pic-2.gd: Likewise. * ld-mips-elf/mips16-pic-3.gd: Likewise. * ld-mips-elf/mips16-pic-4a.gd: Likewise. * ld-mips-elf/multi-got-no-shared.d: Likewise. * ld-mips-elf/nan-2008.d: Likewise. * ld-mips-elf/nan-legacy.d: Rework test. * ld-mips-elf/pic-and-nonpic-3a.gd: Likewise. * ld-mips-elf/pic-and-nonpic-3b.gd: Likewise. * ld-mips-elf/pic-and-nonpic-5b.gd: Likewise. * ld-mips-elf/pic-and-nonpic-6.ld: Likewise. * ld-mips-elf/rel32-n32.d: Likewise. * ld-mips-elf/rel32-o32.d: Likewise. * ld-mips-elf/rel64.d: Likewise. * ld-mips-elf/tls-multi-got-1.r: Likewise. * ld-elf/group.ld: Discard .MIPS.abiflags and .gnu.attributes. * ld-elf/orphan-region.ld: Likewise. * ld-elf/orphan.ld: Likewise. * ld-mips-elf/compressed-plt-1.ld: Likewise. * ld-mips-elf/dyn-sec64.ld: Likewise. * ld-mips-elf/got-dump-1.ld: Likewise. * ld-mips-elf/got-dump-2.ld: Likewise. * ld-mips-elf/got-page-1.ld: Likewise. * ld-mips-elf/mips-dyn.ld: Likewise. * ld-mips-elf/mips-lib.ld: Likewise. * ld-mips-elf/pic-and-nonpic-3a.ld: Likewise. * ld-mips-elf/pic-and-nonpic-3b.ld: Likewise. * ld-mips-elf/pic-and-nonpic-4b.ld: Likewise. * ld-mips-elf/pic-and-nonpic-5b.ld: Likewise. * ld-mips-elf/region1.t: Likewise. * ld-mips-elf/stub-dynsym-1.ld: Likewise. * ld-mips-elf/tls-hidden3.ld: Likewise. * ld-mips-elf/vxworks1.ld: Likewise. * ld-scripts/overlay-size.t: Likewise. * ld-mips-elf/elf-rel-got-n32-embed.d: Remove .MIPS.abiflags from objects. * ld-mips-elf/elf-rel-got-n32.d: Likewise. * ld-mips-elf/elf-rel-got-n64-embed.d: Likewise. * ld-mips-elf/elf-rel-got-n64-linux.d: Likewise. * ld-mips-elf/elf-rel-got-n64.d: Likewise. * ld-mips-elf/elf-rel-xgot-n32.d: Likewise. * ld-mips-elf/elf-rel-xgot-n32-embed.d: Likewise. * ld-mips-elf/elf-rel-xgot-n64.d: Likewise. * ld-mips-elf/elf-rel-xgot-n64-linux.d: Likewise. * ld-mips-elf/elf-rel-xgot-n64-embed.d: Likewise. * ld-mips-elf/mips-elf.exp: Add new tests.
2014-07-22Add AVX512DQ instructions and their AVX512VL variants.Ilya Tocar8-5910/+9526
gas/ * config/tc-i386.c (cpu_arch): Add .avx512dq, CPU_AVX512DQ_FLAGS. * doc/c-i386.texi: Document avx512dq/.avx512dq. gas/testsuite/ * gas/i386/avx512dq-intel.d: New. * gas/i386/avx512dq.d: New. * gas/i386/avx512dq.s: New. * gas/i386/avx512dq_vl-intel.d: New. * gas/i386/avx512dq_vl.d: New. * gas/i386/avx512dq_vl.s: New. * gas/i386/i386.exp: Run new AVX-512 tests. * gas/i386/x86-64-avx512dq-intel.d: New. * gas/i386/x86-64-avx512dq.d: New. * gas/i386/x86-64-avx512dq.s: New. * gas/i386/x86-64-avx512dq_vl-intel.d: New. * gas/i386/x86-64-avx512dq_vl.d: New. * gas/i386/x86-64-avx512dq_vl.s: New. opcodes/ * i386-dis-evex.h: Updated. * i386-dis.c (PREFIX enum): Add PREFIX_EVEX_0F54, PREFIX_EVEX_0F55, PREFIX_EVEX_0F56, PREFIX_EVEX_0F57, PREFIX_EVEX_0F3A16, PREFIX_EVEX_0F3A22, PREFIX_EVEX_0F3A50, PREFIX_EVEX_0F3A51, PREFIX_EVEX_0F3A56, PREFIX_EVEX_0F3A57, PREFIX_EVEX_0F3A66, PREFIX_EVEX_0F3A67. (VEX_LEN enum): Add VEX_LEN_0F92_P_2, VEX_LEN_0F93_P_2, VEX_W_0F92_P_2_LEN_0, VEX_W_0F93_P_2_LEN_0. (VEX_W enum): Add EVEX_W_0F54_P_0, EVEX_W_0F54_P_2, EVEX_W_0F55_P_0, EVEX_W_0F55_P_2, EVEX_W_0F56_P_0, EVEX_W_0F56_P_2, EVEX_W_0F57_P_0, EVEX_W_0F57_P_2, EVEX_W_0F78_P_2, EVEX_W_0F79_P_2, EVEX_W_0F7A_P_2, EVEX_W_0F7B_P_2, EVEX_W_0F3838_P_1, EVEX_W_0F3839_P_1, EVEX_W_0F3A16_P_2, EVEX_W_0F3A22_P_2, EVEX_W_0F3A50_P_2, EVEX_W_0F3A51_P_2, EVEX_W_0F3A56_P_2, EVEX_W_0F3A57_P_2, EVEX_W_0F3A66_P_2, EVEX_W_0F3A67_P_2. (prefix_table): Add entries for new instructions. (vex_len_table): Ditto. (vex_w_table): Ditto. (OP_E_memory): Update xmmq_mode handling. * i386-gen.c (cpu_flag_init): Add CPU_AVX512DQ_FLAGS. (cpu_flags): Add CpuAVX512DQ. * i386-init.h: Regenerared. * i386-opc.h (CpuAVX512DQ): New. (i386_cpu_flags): Add cpuavx512dq. * i386-opc.tbl: Add AVX512DQ instructions. * i386-tbl.h: Regenerate.
generated by cgit v1.1 at 2024-12-26 17:30:15 +0000