Age | Commit message (Collapse) | Author | Files | Lines |
|
Nowadays, memory error in rl78 disassembly is not handled, so if I
start a fresh GDB, and disassemble,
(gdb) set architecture rl78
The target architecture is assumed to be rl78
(gdb) disassemble 0x0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000: nop
0x00000001: nop
0x00000002: nop
0x00000003: nop
the output is wrong. This patch adds code to call dis->memory_error_func
on memory error, and longjmp to print_insn_rl78_common. With this
patch applied,
(gdb) set architecture rl78
The target architecture is assumed to be rl78
(gdb) disassemble 0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000: Cannot access memory at address 0x0
opcodes:
2016-12-12 Yao Qi <yao.qi@linaro.org>
* rl78-dis.c: Include <setjmp.h>.
(struct private): New.
(rl78_get_byte): Check return value of read_memory_func, and
call memory_error_func and OPCODES_SIGLONGJMP on error.
(print_insn_rl78_common): Call OPCODES_SIGJMP.
|
|
PR target/19747
* rl78-dis.c (print_insn_rl78_common): Fix typo.
|
|
* rl78-decode.opc (rl78_decode_opcode): Add 's' operand to movw
instructions that can support stack pointer operations.
* rl78-decode.c: Regenerate.
* rl78-dis.c: Fix display of stack pointer in MOVW based
instructions.
* testsuite/gas/rl78/sp-relative-movw.s: New test.
* testsuite/gas/rl78/sp-relative-movw.d: Expected disassembly.
* testsuite/gas/rl78/rl78.exp: Run the new test.
|
|
|
|
PR binutils/19158
opcodes * rl78-decode.opc: Add 's' print operator to instructions that
access system registers.
* rl78-decode.c: Regenerate.
* rl78-dis.c (print_insn_rl78_common): Decode all system
registers.
tests * gas/rl78/pr19158.s: New test source file.
* gas/rl78/pr19158.d: New test case.
* gas/rl78/rl78.exp: Run the new test.
|
|
|
|
[gas]
* config/rl78-defs.h (rl78_isa_g10): New.
(rl78_isa_g13): New.
(rl78_isa_g14): New.
* config/rl78-parse.y (ISA_G10): New.
(ISA_G13): New.
(ISA_G14): New.
(MULHU, MULH, MULU, DIVHU, DIVWU, MACHU, MACH): Use them.
* config/tc-rl78.c (rl78_isa_g10): New.
(rl78_isa_g13): New.
(rl78_isa_g14): New.
[gdb]
* rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
rl78_decode_opcode
[include]
* dis-asm.h (print_insn_rl78_g10): New.
(print_insn_rl78_g13): New.
(print_insn_rl78_g14): New.
(rl78_get_disassembler): New.
* opcode/rl78.h (RL78_Dis_Isa): New.
(rl78_decode_opcode): Add ISA parameter.
[opcodes]
* disassemble.c (disassembler): Choose suitable disassembler based
on E_ABI.
* rl78-decode.opc (rl78_decode_opcode): Take ISA parameter. Use
it to decode mul/div insns.
* rl78-decode.c: Regenerate.
* rl78-dis.c (print_insn_rl78): Rename to...
(print_insn_rl78_common): ...this, take ISA parameter.
(print_insn_rl78): New.
(print_insn_rl78_g10): New.
(print_insn_rl78_g13): New.
(print_insn_rl78_g14): New.
(rl78_get_disassembler): New.
[sim]
* rl78/cpu.c (g14_multiply): New.
* rl78/cpu.h (g14_multiply): New.
* rl78/load.c (rl78_load): Decode ISA completely.
* rl78/main.c (main): Expand -M to include other ISAs.
* rl78/rl78.c (decode_opcode): Decode based on ISA.
* rl78/trace.c (rl78_disasm_fn): New.
(sim_disasm_init): Reset it.
(sim_disasm_one): Get correct disassembler for ISA.
|
|
disassemble [HL+0] as [HL].
* rl78-decode.opc: Add 'a' attribute to instructions that support
[HL+0] addressing.
* rl78-decode.c: Regenerate.
* rl78-dis.c (print_insn_rl78): Display the offset in [HL+0]
addresses.
|
|
|
|
|
|
* rl78-dis.c (print_insn_rl78): Use alternative form as a GCC false
warning workaround.
|
|
operands, so that data addresses can be corrected when not
ES-overridden.
* rl78-decode.c: Regenerate.
* rl78-dis.c (print_insn_rl78): Make order of modifiers
irrelevent. When the 'e' specifier is used on an operand and no
ES prefix is provided, adjust address to make it absolute.
|
|
* bfin-dis.c: Likewise.
* i860-dis.c: Likewise.
* ia64-dis.c: Likewise.
* ia64-gen.c: Likewise.
* m68hc11-dis.c: Likewise.
* mmix-dis.c: Likewise.
* msp430-dis.c: Likewise.
* or32-dis.c: Likewise.
* rl78-dis.c: Likewise.
* rx-dis.c: Likewise.
* tic4x-dis.c: Likewise.
* tilegx-opc.c: Likewise.
* tilepro-opc.c: Likewise.
* rx-decode.c: Regenerate.
|
|
* configure.ac (rl78-*-*) New case.
* configure: Regenerate.
[bfd]
* Makefile.am (ALL_MACHINES): Add cpu-rl78.lo.
(ALL_MACHINES_CFILES): Add cpu-rl78.c.
(BFD32_BACKENDS): Add elf32-rl78.lo.
(BFD32_BACKENDS_CFILES): Add elf32-rl78.c.
(Makefile.in): Regenerate.
* archures.c (bfd_architecture): Define bfd_arch_rl78.
(bfd_archures_list): Add bfd_rl78_arch.
* config.bfd: Add rl78-*-elf.
* configure.in: Add bfd_elf32_rl78_vec.
* reloc.c (bfd_reloc_code_type): Add BFD_RELOC_RL78_* relocations.
* targets.c (bfd_target_vector): Add bfd_elf32_rl78_vec.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* cpu-rl78.c: New file.
* elf32-rl78.c: New file.
[binutils]
* readelf.c: Include elf/rl78.h
(guess_is_rela): Handle EM_RL78.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
(is_32bit_abs_reloc): Likewise.
* NEWS: Mention addition of RL78 support.
* MAINTAINERS: Add myself as RL78 port maintainer.
[gas]
* Makefile.am (TARGET_CPU_CFILES): Add tc-rl78.c.
(TARGET_CPU_HFILES): Add rc-rl78.h.
(EXTRA_DIST): Add rl78-parse.c and rl78-parse.y.
(rl78-parse.c, rl78-parse.h, rl78-parse.o, rl78-defs.h): New rules.
* Makefile.in: Regenerate.
* configure.in: Add rl78 case.
* configure: Regenerate.
* configure.tgt: Add rl78 case.
* config/rl78-defs.h: New file.
* config/rl78-parse.y: New file.
* config/tc-rl78.c: New file.
* config/tc-rl78.h: New file.
* NEWS: Add Renesas RL78.
* doc/Makefile.am (c-rl78.texi): New.
* doc/Makefile.in: Likewise.
* doc/all.texi: Enable it.
* doc/as.texi: Add it.
[include]
* dis-asm.h (print_insn_rl78): Declare.
[include/elf]
* common.h (EM_RL78, EM_78K0R): New.
* rl78.h: New.
[include/opcode]
* rl78.h: New file.
[ld]
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32rl78.c.
(+eelf32rl78.c): New rule.
* Makefile.in: Regenerate.
* configure.tgt: Add rl78-*-* case.
* emulparams/elf32rl78.sh: New file.
* NEWS: Mention addition of Renesas RL78 support.
[opcodes]
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add rl78-decode.c and
rl78-dis.c.
(MAINTAINERCLEANFILES): Add rl78-decode.c.
(rl78-decode.c): New rule, built from rl78-decode.opc and opc2c.
* Makefile.in: Regenerate.
* configure.in: Add bfd_rl78_arch case.
* configure: Regenerate.
* disassemble.c: Define ARCH_rl78.
(disassembler): Add ARCH_rl78 case.
* rl78-decode.c: New file.
* rl78-decode.opc: New file.
* rl78-dis.c: New file.
|