aboutsummaryrefslogtreecommitdiff
path: root/opcodes/rl78-decode.c
AgeCommit message (Collapse)AuthorFilesLines
2017-06-15Fix address violation when disassembling a corrupt RL78 binary.Nick Clifton1-409/+411
PR binutils/21588 * rl78-decode.opc (OP_BUF_LEN): Define. (GETBYTE): Check for the index exceeding OP_BUF_LEN. (rl78_decode_opcode): Use OP_BUF_LEN as the length of the op_buf array. * rl78-decode.c: Regenerate.
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-03-02Regenerate rl78 opcodes fileAlan Modra1-2/+2
For newer comments. * rl78-decode.c: Regenerate.
2016-01-14Fix display of RL78 MOVW instructions that use the stack pointer.Nick Clifton1-1/+1
* rl78-decode.opc (rl78_decode_opcode): Add 's' operand to movw instructions that can support stack pointer operations. * rl78-decode.c: Regenerate. * rl78-dis.c: Fix display of stack pointer in MOVW based instructions. * testsuite/gas/rl78/sp-relative-movw.s: New test. * testsuite/gas/rl78/sp-relative-movw.d: Expected disassembly. * testsuite/gas/rl78/rl78.exp: Run the new test.
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-12-08rl78: Enable MULU for all ISAs.DJ Delorie1-160/+159
Unlike other mul/div opcodes, MULU is available on all variants of the RL78. * rl78-decode.opc: Enable MULU for all ISAs. * rl78-decode.c: Regenerate.
2015-10-27Fix RL78 disassembly of DE+offset addressing to always show the offset, even ↵Vinay Kumar1-18/+18
when zero. PR binutils/19159 opcodes * rl78-decode.opc (MOV): Added offset to DE register in index addressing mode. * rl78-decode.c: Regenerate. test * gas/rl78/pr19159.s: New test source file. * gas/rl78/pr19159.d: New test case. * gas/rl78/rl78.exp: Run the new test.
2015-10-27Display system registers by their names when disassembling RL78 instructions.Vinay Kumar1-9/+9
PR binutils/19158 opcodes * rl78-decode.opc: Add 's' print operator to instructions that access system registers. * rl78-decode.c: Regenerate. * rl78-dis.c (print_insn_rl78_common): Decode all system registers. tests * gas/rl78/pr19158.s: New test source file. * gas/rl78/pr19158.d: New test case. * gas/rl78/rl78.exp: Run the new test.
2015-10-27Fix RL78 disassembly so that SP+OFFSET addressing always shows the offset, ↵Vinay Kumar1-15/+15
even when zero. PR binutils/19157 opcodes * rl78-decode.opc: Add 'a' print operator to mov instructions using stack pointer plus index addressing. * rl78-decode.c: Regenerate. tests * gas/rl78: New directory. * gas/rl78/rl78.exp: New test driver. * gas/rl78/pr19157.s: New test source file. * gas/rl78/pr19157.d: New test case.
2015-08-12Remove trailing spaces in opcodesH.J. Lu1-376/+376
2015-04-30Make RL78 disassembler and simulator respect ISA for mul/divDJ Delorie1-440/+442
[gas] * config/rl78-defs.h (rl78_isa_g10): New. (rl78_isa_g13): New. (rl78_isa_g14): New. * config/rl78-parse.y (ISA_G10): New. (ISA_G13): New. (ISA_G14): New. (MULHU, MULH, MULU, DIVHU, DIVWU, MACHU, MACH): Use them. * config/tc-rl78.c (rl78_isa_g10): New. (rl78_isa_g13): New. (rl78_isa_g14): New. [gdb] * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to rl78_decode_opcode [include] * dis-asm.h (print_insn_rl78_g10): New. (print_insn_rl78_g13): New. (print_insn_rl78_g14): New. (rl78_get_disassembler): New. * opcode/rl78.h (RL78_Dis_Isa): New. (rl78_decode_opcode): Add ISA parameter. [opcodes] * disassemble.c (disassembler): Choose suitable disassembler based on E_ABI. * rl78-decode.opc (rl78_decode_opcode): Take ISA parameter. Use it to decode mul/div insns. * rl78-decode.c: Regenerate. * rl78-dis.c (print_insn_rl78): Rename to... (print_insn_rl78_common): ...this, take ISA parameter. (print_insn_rl78): New. (print_insn_rl78_g10): New. (print_insn_rl78_g13): New. (print_insn_rl78_g14): New. (rl78_get_disassembler): New. [sim] * rl78/cpu.c (g14_multiply): New. * rl78/cpu.h (g14_multiply): New. * rl78/load.c (rl78_load): Decode ISA completely. * rl78/main.c (main): Expand -M to include other ISAs. * rl78/rl78.c (decode_opcode): Decode based on ISA. * rl78/trace.c (rl78_disasm_fn): New. (sim_disasm_init): Reset it. (sim_disasm_one): Get correct disassembler for ISA.
2015-02-23Adds a space between the operands of the RL78's MOV instruction for ↵Vinay1-6/+6
consistency with the disassembling of other instructions. * rl78-decode.opc (MOV): Added space between two operands for 'mov' instruction in index addressing mode. * rl78-decode.c: Regenerate.
2015-02-11Fixes a problem with the RL78 disassembler which would incorrectly ↵Nick Clifton1-69/+69
disassemble [HL+0] as [HL]. * rl78-decode.opc: Add 'a' attribute to instructions that support [HL+0] addressing. * rl78-decode.c: Regenerate. * rl78-dis.c (print_insn_rl78): Display the offset in [HL+0] addresses.
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+1
2014-03-05Update copyright yearsAlan Modra1-1/+1
2013-02-27 * rl78-decode.opc (rl78_decode_opcode): Fix typo.Alan Modra1-201/+202
* rl78-decode.c: Regenerate.
2013-02-25 * rl78-decode.opc: Fix encoding of DIVWU insn.Nick Clifton1-4/+6
* rl78-decode.c: Regenerate. * config/rl78-parse.y: Fix encoding of DIVWU insn.
2013-02-04 * po/POTFILES.in: Regenerate.Alan Modra1-407/+407
* rl78-decode.c: Regenerate. * rx-decode.c: Regenerate.
2012-12-17Add copyright noticesNick Clifton1-0/+21
2012-09-10missed from 2012-08-15 changeAlan Modra1-387/+387
2012-08-01 * h8300-dis.c: Fix printf arg warnings.Alan Modra1-407/+407
* i960-dis.c: Likewise. * mips-dis.c: Likewise. * pdp11-dis.c: Likewise. * sh-dis.c: Likewise. * v850-dis.c: Likewise. * configure.in: Formatting. * configure: Regenerate. * rl78-decode.c: Regenerate. * po/POTFILES.in: Regenerate.
2012-05-17 PR 14072Nick Clifton1-2/+1
* configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * sysdep.h: Generate an error if included before config.h. * alpha-opc.c: Include sysdep.h before any other header file. * alpha-dis.c: Likewise. * avr-dis.c: Likewise. * cgen-opc.c: Likewise. * cr16-dis.c: Likewise. * cris-dis.c: Likewise. * crx-dis.c: Likewise. * d10v-dis.c: Likewise. * d10v-opc.c: Likewise. * d30v-dis.c: Likewise. * d30v-opc.c: Likewise. * h8500-dis.c: Likewise. * i370-dis.c: Likewise. * i370-opc.c: Likewise. * m10200-dis.c: Likewise. * m10300-dis.c: Likewise. * micromips-opc.c: Likewise. * mips-opc.c: Likewise. * mips61-opc.c: Likewise. * moxie-dis.c: Likewise. * or32-opc.c: Likewise. * pj-dis.c: Likewise. * ppc-dis.c: Likewise. * ppc-opc.c: Likewise. * s390-dis.c: Likewise. * sh-dis.c: Likewise. * sh64-dis.c: Likewise. * sparc-dis.c: Likewise. * sparc-opc.c: Likewise. * spu-dis.c: Likewise. * tic30-dis.c: Likewise. * tic54x-dis.c: Likewise. * tic80-dis.c: Likewise. * tic80-opc.c: Likewise. * tilegx-dis.c: Likewise. * tilepro-dis.c: Likewise. * v850-dis.c: Likewise. * v850-opc.c: Likewise. * vax-dis.c: Likewise. * w65-dis.c: Likewise. * xgate-dis.c: Likewise. * xtensa-dis.c: Likewise. * rl78-decode.opc: Likewise. * rl78-decode.c: Regenerate. * rx-decode.opc: Likewise. * rx-decode.c: Regenerate. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * sysdep.h: Generate an error if included before config.h. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * aclocal.m4: Regenerate. * bfd-in.h: Generate an error if included before config.h. * sysdep.h: Likewise. * bfd-in2.h: Regenerate. * compress.c: Remove #include "config.h". * plugin.c: Likewise. * elf32-m68hc1x.c: Include sysdep.h before alloca-conf.h. * elf64-hppa.c: Likewise. * som.c: Likewise. * xsymc.c: Likewise. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * aclocal.m4: Regenerate. * Makefile.am: Use wrappers around C files generated by flex. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * itbl-lex-wrapper.c: New file. * config/bfin-lex-wrapper.c: New file. * cgen.c: Include as.h before setjmp.h. * config/tc-dlx.c: Include as.h before any other header. * config/tc-h8300.c: Likewise. * config/tc-lm32.c: Likewise. * config/tc-mep.c: Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mmix.c: Likewise. * config/tc-msp430.c: Likewise. * config/tc-or32.c: Likewise. * config/tc-tic4x.c: Likewise. * config/tc-tic54x.c: Likewise. * config/tc-xtensa.c: Likewise. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * unwind-ia64.h: Include config.h.
2012-01-31* rl78-decode.opc (rl78_decode_opcode): Add NOT1.DJ Delorie1-145/+162
* rl78-decode.c: Regenerate. * config/rl78-parse.y (NOT1): Add.
2011-11-02[.]DJ Delorie1-0/+5731
* configure.ac (rl78-*-*) New case. * configure: Regenerate. [bfd] * Makefile.am (ALL_MACHINES): Add cpu-rl78.lo. (ALL_MACHINES_CFILES): Add cpu-rl78.c. (BFD32_BACKENDS): Add elf32-rl78.lo. (BFD32_BACKENDS_CFILES): Add elf32-rl78.c. (Makefile.in): Regenerate. * archures.c (bfd_architecture): Define bfd_arch_rl78. (bfd_archures_list): Add bfd_rl78_arch. * config.bfd: Add rl78-*-elf. * configure.in: Add bfd_elf32_rl78_vec. * reloc.c (bfd_reloc_code_type): Add BFD_RELOC_RL78_* relocations. * targets.c (bfd_target_vector): Add bfd_elf32_rl78_vec. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * cpu-rl78.c: New file. * elf32-rl78.c: New file. [binutils] * readelf.c: Include elf/rl78.h (guess_is_rela): Handle EM_RL78. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. * NEWS: Mention addition of RL78 support. * MAINTAINERS: Add myself as RL78 port maintainer. [gas] * Makefile.am (TARGET_CPU_CFILES): Add tc-rl78.c. (TARGET_CPU_HFILES): Add rc-rl78.h. (EXTRA_DIST): Add rl78-parse.c and rl78-parse.y. (rl78-parse.c, rl78-parse.h, rl78-parse.o, rl78-defs.h): New rules. * Makefile.in: Regenerate. * configure.in: Add rl78 case. * configure: Regenerate. * configure.tgt: Add rl78 case. * config/rl78-defs.h: New file. * config/rl78-parse.y: New file. * config/tc-rl78.c: New file. * config/tc-rl78.h: New file. * NEWS: Add Renesas RL78. * doc/Makefile.am (c-rl78.texi): New. * doc/Makefile.in: Likewise. * doc/all.texi: Enable it. * doc/as.texi: Add it. [include] * dis-asm.h (print_insn_rl78): Declare. [include/elf] * common.h (EM_RL78, EM_78K0R): New. * rl78.h: New. [include/opcode] * rl78.h: New file. [ld] * Makefile.am (ALL_EMULATION_SOURCES): Add eelf32rl78.c. (+eelf32rl78.c): New rule. * Makefile.in: Regenerate. * configure.tgt: Add rl78-*-* case. * emulparams/elf32rl78.sh: New file. * NEWS: Mention addition of Renesas RL78 support. [opcodes] * Makefile.am (TARGET_LIBOPCODES_CFILES): Add rl78-decode.c and rl78-dis.c. (MAINTAINERCLEANFILES): Add rl78-decode.c. (rl78-decode.c): New rule, built from rl78-decode.opc and opc2c. * Makefile.in: Regenerate. * configure.in: Add bfd_rl78_arch case. * configure: Regenerate. * disassemble.c: Define ARCH_rl78. (disassembler): Add ARCH_rl78 case. * rl78-decode.c: New file. * rl78-decode.opc: New file. * rl78-dis.c: New file.
generated by cgit v1.1 at 2024-09-11 07:37:45 +0000