Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
Update vadd2, vadd4h, vmac2h, vmpy2h, vsub4h vector instructions
arguments to discriminate between double/single register operands.
opcodes/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* arc-opc.c (insert_rbd): New function.
(RBD): Define.
(RBDdup): Likewise.
* arc-tbl.h (vadd2, vadd4h, vmac2h, vmpy2h, vsub4h): Update
instructions.
Signed-off-by: Claudiu Zissulescu <claziss@gmail.com>
|
|
Code clean up and improvements when changing the cpu from command
line. Also, remove unused/old emulations.
gas/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* config/tc-arc.c (arc_select_cpu): Re-init the bfd if we change
the CPU.
* config/tc-arc.h: Add header if/defs.
* testsuite/gas/arc/pseudos.d: Improve matching pattern.
ls/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* Makefile.am: Remove earcelf_prof.c and earclinux_prof.c
emulations.
* Makefile.in: Regenerate.
* configure.tgt: Likewise.
* emulparams/arcelf_prof.sh: Remove file.
* emulparams/arclinux_prof.sh: Likewise.
opcodes/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* arc-opc.c (C_NE): Make it required.
|
|
|
|
Update ARC opcode table by cleaning up invalid instructions, and fixing wrong encodings.
opcodes/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* arc-ext-tbl.h (bspeek): Remove it, added to main table.
(bspop): Likewise.
(modapp): Likewise.
* arc-opc.c (RAD_CHK): Add.
* arc-tbl.h: Regenerate.
include/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* include/opcode/arc.h (FASTMATH): Add.
(SWITCH): Likewise.
|
|
|
|
gas/
Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/st.d: Fix test.
opcodes/
Claudiu Zissulescu <claziss@synopsys.com>
* arc-opc.c (extract_w6): Fix extending the sign.
|
|
|
|
For ARCv2, h-regs are only valid unitl r31.
gas/
2017-11-21 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/hregs-err.s: New test.
opcodes/
2017-11-21 Claudiu Zissulescu <claziss@synopsys.com>
* arc-opc.c (insert_rhv2): Check h-regs range.
|
|
opcodes/
2017-11-21 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (print_insn_arc): Pretty print pc-relative offsets.
* arc-opc.c (SIMM21_A16_5): Make it pc-relative.
gas/
2017-11-21 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/b.d : Update test.
* testsuite/gas/arc/bl.d: Likewise.
* testsuite/gas/arc/jli-1.d: Likewise.
* testsuite/gas/arc/lp.d: Likewise.
* testsuite/gas/arc/pcl-relocs.d: Likewise.
* testsuite/gas/arc/pcrel-relocs.d: Likewise.
* testsuite/gas/arc/pic-relocs.d: Likewise.
* testsuite/gas/arc/plt-relocs.d: Likewise.
* testsuite/gas/arc/pseudos.d: Likewise.
* testsuite/gas/arc/relax-avoid2.d: Likewise.
* testsuite/gas/arc/relax-avoid3.d: Likewise.
* testsuite/gas/arc/relax-b.d: Likewise.
* testsuite/gas/arc/tls-relocs.d: Likewise.
* testsuite/gas/arc/relax-add01.d: Likewise.
* testsuite/gas/arc/relax-add04.d: Likewise.
* testsuite/gas/arc/relax-ld01.d: Likewise.
* testsuite/gas/arc/relax-sub01.d: Likewise.
* testsuite/gas/arc/relax-sub02.d: Likewise.
* testsuite/gas/arc/relax-sub04.d: Likewise.
* testsuite/gas/arc/pcl-print.s: New file.
* testsuite/gas/arc/pcl-print.d: Likewise.
* testsuite/gas/arc/nps400-12.d: Likewise.
ld/
2017-11-21 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/ld-arc/jli-simple.d: Update test.
|
|
PR 21739
opcodes * arc-opc.c (insert_rhv2): Use lower case first letter in error
message.
(insert_r0): Likewise.
(insert_r1): Likewise.
(insert_r2): Likewise.
(insert_r3): Likewise.
(insert_sp): Likewise.
(insert_gp): Likewise.
(insert_pcl): Likewise.
(insert_blink): Likewise.
(insert_ilink1): Likewise.
(insert_ilink2): Likewise.
(insert_ras): Likewise.
(insert_rbs): Likewise.
(insert_rcs): Likewise.
(insert_simm3s): Likewise.
(insert_rrange): Likewise.
(insert_r13el): Likewise.
(insert_fpel): Likewise.
(insert_blinkel): Likewise.
(insert_pclel): Likewise.
(insert_nps_bitop_size_2b): Likewise.
(insert_nps_imm_offset): Likewise.
(insert_nps_imm_entry): Likewise.
(insert_nps_size_16bit): Likewise.
(insert_nps_##NAME##_pos): Likewise.
(insert_nps_##NAME): Likewise.
(insert_nps_bitop_ins_ext): Likewise.
(insert_nps_##NAME): Likewise.
(insert_nps_min_hofs): Likewise.
(insert_nps_##NAME): Likewise.
(insert_nps_rbdouble_64): Likewise.
(insert_nps_misc_imm_offset): Likewise.
* riscv-dis.c (print_riscv_disassembler_options): Fix typo in
option description.
gas * testsuite/gas/arc/add_s-err.s: Update expected error message.
|
|
include/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (SJLI): Add.
opcode/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
* arc-opc.c (extract_uimm12_20): New function.
(UIMM12_20): New operand.
(SIMM3_5_S): Adjust.
* arc-tbl.h (sjli): Add new instruction.
|
|
The following relocation types were added to GCC/binutils:
ARC_JLI_SECTOFF is a relocation type in Metaware that is now used by
GCC as well to adjust the index of function calls to functions with
attribute jli_call_always.
bfd/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c (JLI): Define.
* reloc.c: Add JLI relocations.
gas/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/jli-1.d: New file.
* testsuite/gas/arc/jli-1.s: Likewise.
* testsuite/gas/arc/taux.d: Update for jli_base.
include/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* elf/arc-reloc.def: Add JLI relocs howto.
* opcode/arc-func.h (replace_jli): New function.
ld/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* emulparams/arcelf.sh (JLI_START_TABLE): Define.
* scripttempl/elfarc.sc: Handle jlitab section.
* scripttempl/elfarcv2.sc: Likewise.
* testsuite/ld-arc/arc.exp: Add JLI test.
* testsuite/ld-arc/jli-script.ld: New file.
* testsuite/ld-arc/jli-simple.dd: Likewise.
* testsuite/ld-arc/jli-simple.rd: Likewise.
* testsuite/ld-arc/jli-simple.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.d: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.err: Likewise.
opcode/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* arc-opc.c (UIMM10_6_S_JLIOFF): Define.
(UIMM3_23): Adjust accordingly.
* arc-regs.h: Add/correct jli_base register.
* arc-tbl.h (jli_s): Likewise.
|
|
enter/leave mnemonics are enhanced to not only accept register ranges
but also single register (i.e., r13) or even no GPR register at all.
gas/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/leave_enter.d: Update test.
* testsuite/gas/arc/leave_enter.s: Likewise.
opcodes/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (print_insn_arc): Smartly print enter/leave mnemonics.
* arc-opc.c (insert_r13el): New function.
(R13_EL): Define.
* arc-tbl.h: Add new enter/leave variants.
|
|
opcodes * arc-nps400-tbl.h: Add Ultra Ip and Miscellaneous instructions format.
* arc-opc.c: Add defines. e.g. F_NJ, F_NM , F_NO_T, F_NPS_SR, F_NPS_M, F_NPS_CORE, F_NPS_ALL.
(insert_nps_misc_imm_offset): New function.
(extract_nps_misc imm_offset): New function.
(arc_num_flag_operands): Add F_NJ, F_NM, F_NO_T.
(arc_flag_special_cases): Add F_NJ, F_NM, F_NO_T.
include * opcode/arc.h (insn_class_t): Add ULTRAIP and MISC class.
gas * testsuite/gas/arc/nps400-12.s: New file.
* testsuite/gas/arc/nps400-12.d: New file.
|
|
Instructions for loading or storing 16/32B data from one address type to
another.
gas/ChangeLog
* testsuite/gas/arc/nps400-11.s: New file.
* testsuite/gas/arc/nps400-11.d: New file.
include/ChangeLog
* opcode/arc.h (insn_class_t): Add DMA class.
opcodes/ChangeLog
* arc-nps400-tbl.h: Add cp32/cp16 instructions format.
* arc-opc.c: Add F_NPS_NA, NPS_DMA_IMM_ENTRY, NPS_DMA_IMM_OFFSET.
(insert_nps_imm_offset): New function.
(extract_nps_imm_offset): New function.
(insert_nps_imm_entry): New function.
(extract_nps_imm_entry): New function.
|
|
Fix assembler relaxation step for add, ld, mov, mpy and sub
instructions. Add tests to it.
gas/
2017-02-15 Claudiu Zissulescu <claziss@synopsys.com>
* config/tc-arc.c (md_convert_frag): Remove @pcl relocation
information from input expression.
(assemble_insn): Make sure pcrel is correctly set.
(arc_pcrel_adjust): Compensate for PCL rounding.
* testsuite/gas/arc/relax-add01.d: New file.
* testsuite/gas/arc/relax-add01.s: Likewise.
* testsuite/gas/arc/relax-add02.d: Likewise.
* testsuite/gas/arc/relax-add02.s: Likewise.
* testsuite/gas/arc/relax-add03.d: Likewise.
* testsuite/gas/arc/relax-add03.s: Likewise.
* testsuite/gas/arc/relax-add04.d: Likewise.
* testsuite/gas/arc/relax-add04.s: Likewise.
* testsuite/gas/arc/relax-ld01.d: Likewise.
* testsuite/gas/arc/relax-ld01.s: Likewise.
* testsuite/gas/arc/relax-ld02.d: Likewise.
* testsuite/gas/arc/relax-ld02.s: Likewise.
* testsuite/gas/arc/relax-mov01.d: Likewise.
* testsuite/gas/arc/relax-mov01.s: Likewise.
* testsuite/gas/arc/relax-mov02.d: Likewise.
* testsuite/gas/arc/relax-mov02.s: Likewise.
* testsuite/gas/arc/relax-mpy01.d: Likewise.
* testsuite/gas/arc/relax-mpy01.s: Likewise.
* testsuite/gas/arc/relax-sub01.d: Likewise.
* testsuite/gas/arc/relax-sub01.s: Likewise.
* testsuite/gas/arc/relax-sub02.d: Likewise.
* testsuite/gas/arc/relax-sub02.s: Likewise.
* testsuite/gas/arc/relax-sub03.d: Likewise.
* testsuite/gas/arc/relax-sub03.s: Likewise.
* testsuite/gas/arc/relax-sub04.d: Likewise.
* testsuite/gas/arc/relax-sub04.s: Likewise.
opcodes/
2017-02-15 Claudiu Zissulescu <claziss@synopsys.com>
* arc-opc.c (UIMM6_20R): Define.
(SIMM12_20): Use above.
(SIMM12_20R): Define.
(SIMM3_5_S): Use above.
(UIMM7_A32_11R_S): Define.
(UIMM7_9_S): Use above.
(UIMM3_13R_S): Define.
(SIMM11_A32_7_S): Use above.
(SIMM9_8R): Define.
(UIMM10_A32_8_S): Use above.
(UIMM8_8R_S): Define.
(W6): Use above.
(arc_relax_opcodes): Use all above defines.
|
|
gas/
2017-02-06 Claudiu Zissulescu <claziss@synopsys.com>
* config/tc-arc.c (parse_opcode_flags): Ignore implicit flags.
include/
2017-02-06 Claudiu Zissulescu <claziss@synopsys.com>
Anton Kolesov <anton.kolesov@synopsys.com>
* opcode/arc.h (insn_class_t): Add ENTER, LEAVE, POP, PUSH, BBIT0,
BBIT1, BI, BIH, BRCC, EI, JLI, and SUB instruction classes.
(flag_class_t): Add F_CLASS_WB, F_CLASS_ZZ, and F_CLASS_IMPLICIT
flag classes.
opcode/
2017-02-06 Claudiu Zissulescu <claziss@synopsys.com>
Anton Kolesov <anton.kolesov@synopsys.com>
* arc-dis.c (arc_disassemble_info): New structure.
(init_arc_disasm_info): New function.
(find_format_from_table): Ignore implicit flags.
(find_format): Update dissassembler private data.
(print_flags): Likewise.
(print_insn_arc): Likewise.
(arc_opcode_to_insn_type): Consider the new added instruction
classes.
(arcAnalyzeInstr): Remove.
(arc_insn_decode): New function.
* arc-dis.h (arc_ldst_writeback_mode): New enum.
(arc_ldst_data_size): Likewise.
(arc_condition_code): Likewise.
(arc_operand_kind): Likewise.
(arc_insn_kind): New struct.
(arc_instruction): Likewise.
(arc_insn_decode): Declare function.
(ARC_Debugger_OperandType): Deleted.
(Flow): Likewise.
(NullifyMode): Likewise.
(allOperandsSize): Likewise.
(arcDisState): Likewise.
(arcAnalyzeInstr): Likewise.
* arc-dis.c (arc_opcode_to_insn_type): Handle newly introduced
insn_class_t enums.
* arc-opc.c (F_SIZED): New define.
(C_CC_EQ, C_CC_GE, C_CC_GT, C_CC_HI, C_CC_HS): Likewise.
(C_CC_LE, C_CC_LO, C_CC_LS, C_CC_LT, C_CC_NE): Likewise.
(C_CC_NE, C_AA_AB, C_AA_AW, C_ZZ_D, C_ZZ_H, C_ZZ_B): Likewise.
(arc_flag_classes): Add F_CLASS_COND/F_CLASS_IMPLICIT flags.
* opcodes/arc-tbl.h: Update instructions to include new
F_CLASS_IMPLICIT flags.
(bbit0, lp): Change class.
(bbit1, bi, bih, br*, ei_s, jli_s): Likewsie
|
|
|
|
gas/
2016-11-29 Claudiu Zissulescu <claziss@synopsys.com>
* config/tc-arc.c (find_opcode_match): New function argument
errmsg.
(assemble_tokens): Collect and report the eventual error message
found during opcode matching process.
* testsuite/gas/arc/lpcount-err.s: New file.
* testsuite/gas/arc/add_s-err.s: Update error message.
opcode/
2016-11-29 Claudiu Zissulescu <claziss@synopsys.com>
* arc-opc.c (insert_ra_chk): New function.
(insert_rb_chk): Likewise.
(insert_rad): Update text error message.
(insert_rcd): Likewise.
(insert_rhv2): Likewise.
(insert_r0): Likewise.
(insert_r1): Likewise.
(insert_r2): Likewise.
(insert_r3): Likewise.
(insert_sp): Likewise.
(insert_gp): Likewise.
(insert_pcl): Likewise.
(insert_blink): Likewise.
(insert_ilink1): Likewise.
(insert_ilink2): Likewise.
(insert_ras): Likewise.
(insert_rbs): Likewise.
(insert_rcs): Likewise.
(insert_simm3s): Likewise.
(insert_rrange): Likewise.
(insert_fpel): Likewise.
(insert_blinkel): Likewise.
(insert_pcel): Likewise.
(insert_nps_3bit_dst): Likewise.
(insert_nps_3bit_dst_short): Likewise.
(insert_nps_3bit_src2_short): Likewise.
(insert_nps_bitop_size_2b): Likewise.
(MAKE_SRC_POS_INSERT_EXTRACT_FUNCS): Likewise.
(RA_CHK): Define.
(RB): Adjust.
(RB_CHK): Define.
(RC): Adjust.
* arc-dis.c (print_insn_arc): Add LOAD and STORE class.
* arc-tbl.h (div, divu): All instructions are DIVREM class.
Change first insn argument to check for LP_COUNT usage.
(rem): Likewise.
(ld, ldd): All instructions are LOAD class. Change first insn
argument to check for LP_COUNT usage.
(st, std): All instructions are STORE class.
(mac, mpy, dmac, mul, dmpy): All instructions are MPY class.
Change first insn argument to check for LP_COUNT usage.
(mov): All instructions are MOVE class. Change first insn
argument to check for LP_COUNT usage.
include/
2016-11-29 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (insn_class_t): Add DIVREM, LOAD, MOVE, MPY, STORE
instruction classes.
|
|
When we match against an address type operand within an instruction it
is important that we match exactly the right address type operand early
on, during the opcode selection phase. If we wait until the operand
insertion phase to check that we have the correct address operand, then
it is too late to select an alternative opcode. This becomes important
only when we have multiple opcodes with the same mnemonic, and operand
lists that differ only in the type of the address operands.
This commit fixes this issue, and adds some example instructions that
require this issue to be fixed (the instructions are identical except
for the address type operand).
gas/ChangeLog:
* config/tc-arc.c (find_opcode_match): Use insert function to
validate matching address type operands.
* testsuite/gas/arc/nps400-10.d: New file.
* testsuite/gas/arc/nps400-10.s: New file.
opcodes/ChangeLog:
* arc-opc.c (arc_flag_operands): Add F_DI14.
(arc_flag_classes): Add C_DI14.
* arc-nps400-tbl.h: Add new exc instructions.
|
|
gas/ChangeLog:
* testsuite/gas/arc/nps-400-9.d: Added.
* testsuite/gas/arc/nps-400-9.s: Added.
include/ChangeLog:
* opcode/arc.h: Add PROTOCOL_DECODE to insn_class_t.
opcodes/ChangeLog:
* arc-dis.c (arc_insn_length): Return length 8 for instructions with
major opcode 0xa.
* arc-nps-400-tbl.h: Add dcmac instruction.
* arc-opc.c (arc_operands): Added operands for dcmac instruction.
(insert_nps_rbdouble_64): Added.
(extract_nps_rbdouble_64): Added.
(insert_nps_proto_size): Added.
(extract_nps_proto_size): Added.
|
|
The current handling for arc instructions longer than 32-bits is all
handled as a special case in both the assembler and disassembler.
The problem with this approach is that it leads to code duplication,
selecting a long instruction is exactly the same process as selecting a
short instruction, except over more bits, in both cases we select based
on bit comparison, and initial operand insertion and extraction.
This commit unifies both the long and short instruction worlds,
converting the core opcodes library from being largely 32-bit focused,
to being largely 64-bit focused.
The changes are, on the whole, not too much. There's obviously a lot of
type changes but otherwise the bulk of the code just works. Most of the
actual functional changes are to code that previously handled the longer
48 or 64 bit instructions. The insert/extract handlers for these have
now been brought into line with the short instruction insert/extract
handlers.
All of the special case handling code that was previously added has now
been removed again. Overall, this commit reduces the amount of code in
the arc assembler and disassembler.
gas/ChangeLog:
* config/tc-arc.c (struct arc_insn): Change type of insn field.
(md_number_to_chars_midend): Support 6- and 8-byte values.
(emit_insn0): Update debug output.
(find_opcode_match): Likewise.
(build_fake_opcode_hash_entry): Delete.
(find_special_case_long_opcode): Delete.
(find_special_case): Remove long format special case handling.
(insert_operand): Change instruction type and update debug print
format.
(assemble_insn): Change instruction type, update debug print
formats, and remove unneeded assert.
include/ChangeLog:
* opcode/arc.h (struct arc_opcode): Change type of opcode and mask
fields.
(struct arc_long_opcode): Delete.
(struct arc_operand): Change types for insert and extract
handlers.
opcodes/ChangeLog:
* arc-dis.c (struct arc_operand_iterator): Remove all fields
relating to long instruction processing, add new limm field.
(OPCODE): Rename to...
(OPCODE_32BIT_INSN): ...this.
(OPCODE_AC): Delete.
(skip_this_opcode): Handle different instruction lengths, update
macro name.
(special_flag_p): Update parameter type.
(find_format_from_table): Update for more instruction lengths.
(find_format_long_instructions): Delete.
(find_format): Update for more instruction lengths.
(arc_insn_length): Likewise.
(extract_operand_value): Update for more instruction lengths.
(operand_iterator_next): Remove code relating to long
instructions.
(arc_opcode_to_insn_type): New function.
(print_insn_arc):Update for more instructions lengths.
* arc-ext.c (extInstruction_t): Change argument type.
* arc-ext.h (extInstruction_t): Change argument type.
* arc-fxi.h: Change type unsigned to unsigned long long
extensively throughout.
* arc-nps400-tbl.h: Add long instructions taken from
arc_long_opcodes table in arc-opc.c.
* arc-opc.c: Update parameter types on insert/extract handlers.
(arc_long_opcodes): Delete.
(arc_num_long_opcodes): Delete.
(arc_opcode_len): Update for more instruction lengths.
|
|
In preparation for moving to a world where arc instructions can be 2, 4,
6, or 8 bytes in length, replace the ARC_SHORT macro (which is either
true of false) with an arc_opcode_len function that returns a length in
bytes.
There should be no functional change after this commit.
gas/ChangeLog:
* config/tc-arc.c (assemble_insn): Replace use of ARC_SHORT with
arc_opcode_len.
include/ChangeLog:
* opcode/arc.h (arc_opcode_len): Declare.
(ARC_SHORT): Delete.
opcodes/ChangeLog:
* arc-dis.c (find_format_from_table): Replace use of ARC_SHORT
with arc_opcode_len.
(find_format_long_instructions): Likewise.
* arc-opc.c (arc_opcode_len): New function.
|
|
include/
2016-09-26 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (insn_class_t): Add two new classes.
opcodes/
2016-09-26 Claudiu Zissulescu <claziss@synopsys.com>
* arc-ext-tbl.h (EXTINSN2OPF): Define.
(EXTINSN2OP): Use EXTINSN2OPF.
(bspeekm, bspop, modapp): New extension instructions.
* arc-opc.c (F_DNZ_ND): Define.
(F_DNZ_D): Likewise.
(F_SIZEB1): Changed.
(C_DNZ_D): Define.
(C_HARD): Changed.
* arc-tbl.h (dbnz): New instruction.
(prealloc): Allow it for ARC EM.
(xbfu): Likewise.
|
|
opcodes * arc-nps400-tbl.h: Change block comments to GNU format.
* arc-dis.c: Add new globals addrtypenames,
addrtypenames_max, and addtypeunknown.
(get_addrtype): New function.
(print_insn_arc): Print colons and address types when
required.
* arc-opc.c: Add MAKE_INSERT_NPS_ADDRTYPE macro and use to
define insert and extract functions for all address types.
(arc_operands): Add operands for colon and all address
types.
* arc-nps-400-tbl.h: Add NPS-400 BMU instructions to opcode table.
* arc-opc.c: Add NPS_BD_TYPE and NPS_BMU_NUM operands,
insert_nps_bd_num_buff and extract_nps_bd_num_buff functions.
* arc-nps-400-tbl.h: Add NPS-400 PMU instructions to opcode table.
* arc-opc.c: Add NPS_PMU_NXT_DST and NPS_PMU_NUM_JOB operands,
insert_nps_pmu_num_job and extract_nps_pmu_num_job functions.
include * opcode/arc.h: Add ARC_OPERAND_ADDRTYPE,
ARC_OPERAND_COLON. Add the arc_nps_address_type enum and
ARC_NUM_ADDRTYPES.
* opcode/arc.h: Add BMU to insn_class_t enum.
* opcode/arc.h: Add PMU to insn_class_t enum.
gas * config/tc-arc.c: Add new global arc_addrtype_hash.
Define O_colon and O_addrtype.
(debug_exp): Add O_colon and O_addrtype.
(tokenize_arguments): Handle colon and address type
tokens.
(declare_addrtype): New function.
(md_begin): Initialise arc_addrtype_hash.
(arc_parse_name): Add lookup of address types.
(assemble_insn): Handle colons and address types by
ignoring them.
* testsuite/gas/arc/nps400-8.s: New file.
* testsuite/gas/arc/nps400-8.d: New file.
* testsuite/gas/arc/nps400-8.s: Add PMU instruction tests.
* testsuite/gas/arc/nps400-8.d: Add expected PMU
instruction output.
|
|
The code supporting -mspfp, -mdpfp, and -mfpuda options are in
sections of code that are commented as being for backward
compatibility only, and having no effect. However, they do have an
effect, enabling the SPX, DPX, and DPA instruction subclasses
respectively. This commit moves the code supporting these options
away from the comments indicating that they are dummy options, and
also fixes a small issue where -mnps400 had the additional effect
of enabling SPX instructions.
A couple of other minor edits (that make no functional change) are
also included.
gas/ChangeLog:
* config/tc-arc.c (options, md_longopts, md_parse_option):
Move -mspfp, -mdpfp and -mfpuda out of the sections for
dummy options. Correct erroneous enabling of SPFP
instructions when using -mnps400.
include/ChangeLog:
* opcode/arc.h: Make insn_class_t alphabetical again.
opcodes/ChangeLog:
* arc-opc.c: Correct description of availability of NPS400
features.
|
|
gas * config/tc-arc.c (check_cpu_feature, md_parse_option):
Add nps400 option and feature. Add check for nps400
feature. Refactor existing checks to check subclass before
feature enablement.
(md_show_usage): Document flags for NPS-400 and add some other
undocumented flags.
(cpu_type): Remove nps400 CPU type entry
(check_zol): Remove bfd_mach_arc_nps400 case.
(md_show_usage): Add help on -mcpu=nps400.
(cpu_types): Add entry for nps400 as arc700 plus nps400 extension
set.
* doc/c-arc.texi: Document the -mnps400, -mspfp, -mdpfp, and
-fpuda flags. Document -mcpu=nps400.
* testsuite/gas/arc/nps-400-0.d: Use -mcpu=arc700 -mnps400. Change
expected flags to match ARC700 instead of NPS400.
* testsuite/gas/arc/nps-400-1.d: Use -mcpu=arc700 -mnps400.
* testsuite/gas/arc/nps-400-2.d: Likewise.
* testsuite/gas/arc/nps-400-3.d: Likewise.
* testsuite/gas/arc/nps-400-4.d: Likewise.
* testsuite/gas/arc/nps-400-5.d: Likewise.
* testsuite/gas/arc/nps-400-6.d: Likewise.
* testsuite/gas/arc/nps-400-7.d: Likewise.
* testsuite/gas/arc/textinsn2op01.s: Change opcode of myinsn to
avoid clash with cbba instruction.
* testsuite/gas/arc/textinsn2op01.d: Likewise.
* testsuite/gas/arc/textinsn3op.d: Likewise.
* testsuite/gas/arc/textinsn3op.s: Likewise.
* testsuite/gas/arc/nps-400-0.d: Test using NPS-400 using
-mcpu=nps400 as an alternative to -mcpu=arc700 -mnps400 flags.
binutils* readelf.c (decode_ARC_machine_flags): Remove E_ARC_MACH_NPS400
case.
ld * testsuite/ld-arc/nps-1a.d: Use -mcpu=arc700 -mnps400.
* testsuite/ld-arc/nps-1b.d: Likewise.
include * opcode/arc.h: Add nps400 extension and instruction
subclass.
Remove ARC_OPCODE_NPS400
* elf/arc.h: Remove E_ARC_MACH_NPS400
opcodes * arc-dis.c (arc_insn_length): Add comment on instruction length.
Use same method for determining instruction length on ARC700 and
NPS-400.
(arc_insn_length, print_insn_arc): Remove bfd_mach_arc_nps400.
* arc-nps400-tbl.h: Make all nps400 instructions ARC700 instructions
with the NPS400 subclass.
* arc-opc.c: Likewise.
bfd * archures.c: Remove bfd_mach_arc_nps400.
* bfd-in2.h: Likewise.
* cpu-arc.c (arch_info_struct): Likewise.
* elf32-arc.c (arc_elf_object_p, arc_elf_final_write_processing):
Likewise.
|
|
The extract function used for some arc_s instructions was not
implemented, and instead always returned 0. Fixed in this commit.
opcodes/ChangeLog:
* arc-opc.c (extract_rhv1): Extract value from insn.
gas/ChangeLog:
* testsuite/gas/arc/add_s.d: New file.
* testsuite/gas/arc/add_s.s: New file.
|
|
This commit adds the ldbit instruction for the NPS-400. The ldbit
instruction uses the same encoding as the ld instruction, but sets
the ZZ field to 11 (which is a reserved setting), and sets the AA
field to 1 or 2 for the x2 and x4 flags respectively.
|
|
With the exception of ldbit, this commit adds implementations of
all DPI instructions for the NPS-400. These instructions are:
- hash / hash.p[0-3]
- tr
- utf8
- e4by
- addf
|
|
This commit completes the implementation of arithmetic and logic
instructions for the NPS-400. These instructions are:
- calcbsd / calcbxd
- calckey / calcxkey
- mxb / imxb
- addl, subl, orl, andl, xorl
- andab / orab
- lbdsize
- bdlen
- csms, csma, cbba
- zncv
- hofs
|
|
gas * config/tc-arc.c (parse_opcode_flags): New function.
(find_opcode_match): Move flag parsing code out to new function.
Ignore operands marked IGNORE.
(build_fake_opcode_hash_entry): New function.
(find_special_case_long_opcode): New function.
(find_special_case): Lookup long opcodes.
* testsuite/gas/arc/nps400-7.d: New file.
* testsuite/gas/arc/nps400-7.s: New file.
include * opcode/arc.h (MAX_INSN_ARGS): Increase to 16.
(struct arc_long_opcode): New structure.
(arc_long_opcodes): Declare.
(arc_num_long_opcodes): Declare.
opcodes * arc-dis.c (struct arc_operand_iterator): New structure.
(find_format_from_table): All the old content from find_format,
with some minor adjustments, and parameter renaming.
(find_format_long_instructions): New function.
(find_format): Rewritten.
(arc_insn_length): Add LSB parameter.
(extract_operand_value): New function.
(operand_iterator_next): New function.
(print_insn_arc): Use new functions to find opcode, and iterator
over operands.
* arc-opc.c (insert_nps_3bit_dst_short): New function.
(extract_nps_3bit_dst_short): New function.
(insert_nps_3bit_src2_short): New function.
(extract_nps_3bit_src2_short): New function.
(insert_nps_bitop1_size): New function.
(extract_nps_bitop1_size): New function.
(insert_nps_bitop2_size): New function.
(extract_nps_bitop2_size): New function.
(insert_nps_bitop_mod4_msb): New function.
(extract_nps_bitop_mod4_msb): New function.
(insert_nps_bitop_mod4_lsb): New function.
(extract_nps_bitop_mod4_lsb): New function.
(insert_nps_bitop_dst_pos3_pos4): New function.
(extract_nps_bitop_dst_pos3_pos4): New function.
(insert_nps_bitop_ins_ext): New function.
(extract_nps_bitop_ins_ext): New function.
(arc_operands): Add new operands.
(arc_long_opcodes): New global array.
(arc_num_long_opcodes): New global.
* arc-nps400-tbl.h: Add comments referencing arc_long_opcodes.
|
|
This patch corrects the instructioninformation passed into the
disassebler_info structure.
include/
2016-05-23 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (insn_subclass_t): Add COND.
(flag_class_t): Add F_CLASS_EXTEND.
opcodes/
2016-05-23 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (print_flags): Set branch_delay_insns, and insn_type
information.
(print_insn_arc): Set insn_type information.
* arc-opc.c (C_CC): Add F_CLASS_COND.
* arc-tbl.h (bbit0, bbit1): Update subclass to COND.
(beq_s, bge_s, bgt_s, bhi_s, bhs_s): Likewise.
(ble_s, blo_s, bls_s, blt_s, bne_s): Likewise.
(breq, breq_s, brge, brhs, brlo, brlt): Likewise.
(brne, brne_s, jeq_s, jne_s): Likewise.
|
|
gas/
2016-05-03 Claudiu Zissulescu <claziss@synopsys.com>
* config/tc-arc.c (syntaxclass): Add SYNTAX_NOP and SYNTAX_1OP.
(arc_extinsn): Handle new introduced syntax.
* testsuite/gas/arc/textinsn1op.d: New file.
* testsuite/gas/arc/textinsn1op.s: Likewise.
* doc/c-arc.texi: Document SYNTAX_NOP and SYNTAX_1OP.
opcodes/
2016-05-03 Claudiu Zissulescu <claziss@synopsys.com>
* arc-ext.c (dump_ARC_extmap): Handle SYNATX_NOP and SYNTAX_1OP.
(arcExtMap_genOpcode): Likewise.
* arc-opc.c (arg_32bit_rc): Define new variable.
(arg_32bit_u6): Likewise.
(arg_32bit_limm): Likewise.
include/
2016-05-03 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (ARC_SYNTAX_1OP): Declare
(ARC_SYNTAX_NOP): Likewsie.
(ARC_OP1_MUST_BE_IMM): Update defined value.
(ARC_OP1_IMM_IMPLIED): Likewise.
(arg_32bit_rc, arg_32bit_u6, arg_32bit_limm): Declare.
|
|
Add some more arc/nps400 instructions and the associated operands.
There's also a test added into the assembler.
gas/ChangeLog:
* testsuite/gas/arc/nps400-6.d: New file.
* testsuite/gas/arc/nps400-6.s: New file.
include/ChangeLog:
* opcode/arc.h (MAX_INSN_ARGS): Increase 6 to 8.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add addb, subb, adcb, sbcb, andb, xorb, orb,
fxorb, wxorb, shlb, shrb, notb, cntbb, div, mod, divm, and qcmp
instructions.
* arc-opc.c (insert_nps_bitop_size): Delete.
(extract_nps_bitop_size): Delete.
(MAKE_SRC_POS_INSERT_EXTRACT_FUNCS): Define, and use.
(extract_nps_qcmp_m3): Define.
(extract_nps_qcmp_m2): Define.
(extract_nps_qcmp_m1): Define.
(arc_flag_operands): Add F_NPS_SX, F_NPS_AR, F_NPS_AL.
(arc_flag_classes): Add C_NPS_SX, C_NPS_AR_AL
(arc_operands): Add NPS_SRC2_POS, NPS_SRC1_POS, NPS_ADDB_SIZE,
NPS_ANDB_SIZE, NPS_FXORB_SIZ, NPS_WXORB_SIZ, NPS_R_XLDST,
NPS_DIV_UIMM4, NPS_QCMP_SIZE, NPS_QCMP_M1, NPS_QCMP_M2, and
NPS_QCMP_M3.
|
|
Add support for arc/nps400 cmem instructions, these load and store
instructions are hard-wired to access "0x57f00000 + 16-bit-offset".
Supporting this relocation required some additions to the arc relocation
handling in the bfd library, as well as the standard changes required to
add a new relocation type.
There's a test of the new instructions in the assembler, and a test of
the relocation in the linker.
bfd/ChangeLog:
* reloc.c: Add BFD_RELOC_ARC_NPS_CMEM16 entry.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c: Add 'opcode/arc.h' include.
(struct arc_relocation_data): Add symbol_name.
(arc_special_overflow_checks): New function.
(arc_do_relocation): Use arc_special_overflow_checks, reindent as
required, add an extra comment.
(elf_arc_relocate_section): Setup symbol_name in reloc_data.
gas/ChangeLog:
* testsuite/gas/arc/nps400-3.d: New file.
* testsuite/gas/arc/nps400-3.s: New file.
include/ChangeLog:
* elf/arc-reloc.def: Add ARC_NPS_CMEM16 reloc.
* opcode/arc.h (NPS_CMEM_HIGH_VALUE): Define.
ld/ChangeLog:
* testsuite/ld-arc/arc.exp: New file.
* testsuite/ld-arc/nps-1.s: New file.
* testsuite/ld-arc/nps-1a.d: New file.
* testsuite/ld-arc/nps-1b.d: New file.
* testsuite/ld-arc/nps-1b.err: New file.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add xldb, xldw, xld, xstb, xstw, and xst
instructions.
* arc-opc.c (insert_nps_cmem_uimm16): New function.
(extract_nps_cmem_uimm16): New function.
(arc_operands): Add NPS_XLDST_UIMM16 operand.
|
|
gas/
2016-04-05 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/textauxregister.d: New file.
* testsuite/gas/arc/textauxregister.s: Likewise.
* testsuite/gas/arc/textcondcode.d: Likewise.
* testsuite/gas/arc/textcondcode.s: Likewise.
* testsuite/gas/arc/textcoreregister.d: Likewise.
* testsuite/gas/arc/textcoreregister.s: Likewise.
* testsuite/gas/arc/textpseudoop.d: Likewise.
* testsuite/gas/arc/textpseudoop.s: Likewise.
* testsuite/gas/arc/ld2.d: Update test.
* testsuite/gas/arc/st.d: Likewise.
* testsuite/gas/arc/taux.d: Likewise.
* doc/c-arc.texi (ARC Directives): Add .extCondCode,
.extCoreRegister and .extAuxRegister documentation.
* config/tc-arc.c (arc_extcorereg): New function.
(md_pseudo_table): Add .extCondCode, .extCoreRegister and
.extAuxRegister pseudo-ops.
(extRegister_t): New type.
(ext_condcode, arc_aux_hash): New global variable.
(find_opcode_match): Check for extensions.
(preprocess_operands): Likewise.
(md_begin): Add aux registers in a hash.
(assemble_insn): Update use arc_flags member.
(tokenize_extregister): New function.
(create_extcore_section): Likewise.
* config/tc-arc.h (MAX_FLAG_NAME_LENGHT): Increase to 10.
(arc_flags): Delete code, add flgp.
include/
2016-04-05 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (flag_class_t): Update.
(ARC_OPCODE_NONE): Define.
(ARC_OPCODE_ARCALL): Likewise.
(ARC_OPCODE_ARCFPX): Likewise.
(ARC_REGISTER_READONLY): Likewise.
(ARC_REGISTER_WRITEONLY): Likewise.
(ARC_REGISTER_NOSHORT_CUT): Likewise.
(arc_aux_reg): Add cpu.
opcodes/
2016-04-05 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (find_format): Check for extension flags.
(print_flags): New function.
(print_insn_arc): Update for .extCondCode, .extCoreRegister and
.extAuxRegister.
* arc-ext.c (arcExtMap_coreRegName): Use
LAST_EXTENSION_CORE_REGISTER.
(arcExtMap_coreReadWrite): Likewise.
(dump_ARC_extmap): Update printing.
* arc-opc.c (arc_flag_classes): Add F_CLASS_EXTEND flag.
(arc_aux_regs): Add cpu field.
* arc-regs.h: Add cpu field, lower case name aux registers.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
|
|
gas/
2016-04-04 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/textinsn-errors.d: New File.
* testsuite/gas/arc/textinsn-errors.err: Likewise.
* testsuite/gas/arc/textinsn-errors.s: Likewise.
* testsuite/gas/arc/textinsn2op.d: Likewise.
* testsuite/gas/arc/textinsn2op.s: Likewise.
* testsuite/gas/arc/textinsn2op01.d: Likewise.
* testsuite/gas/arc/textinsn2op01.s: Likewise.
* testsuite/gas/arc/textinsn3op.d: Likewise.
* testsuite/gas/arc/textinsn3op.s: Likewise.
* doc/c-arc.texi (ARC Directives): Add .extInstruction
documentation.
* config/tc-arc.c (arcext_section): New variable.
(arc_extinsn): New function.
(md_pseudo_table): Add .extInstruction pseudo op.
(attributes_t): New type.
(suffixclass, syntaxclass, syntaxclassmod): New constant
structures.
(find_opcode_match): Remove arc_num_opcodes.
(md_begin): Likewise.
(tokenize_extinsn): New function.
(arc_set_ext_seg): Likewise.
(create_extinst_section): Likewise.
include/
2016-04-04 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (arc_num_opcodes): Remove.
(ARC_SYNTAX_3OP, ARC_SYNTAX_2OP, ARC_OP1_MUST_BE_IMM)
(ARC_OP1_IMM_IMPLIED, ARC_SUFFIX_NONE, ARC_SUFFIX_COND)
(ARC_SUFFIX_FLAG): Define.
(flags_none, flags_f, flags_cc, flags_ccf): Declare.
(arg_none, arg_32bit_rarbrc, arg_32bit_zarbrc, arg_32bit_rbrbrc)
(arg_32bit_rarbu6, arg_32bit_zarbu6, arg_32bit_rbrbu6)
(arg_32bit_rbrbs12, arg_32bit_ralimmrc, arg_32bit_rarblimm)
(arg_32bit_zalimmrc, arg_32bit_zarblimm, arg_32bit_rbrblimm)
(arg_32bit_ralimmu6, arg_32bit_zalimmu6, arg_32bit_zalimms12)
(arg_32bit_ralimmlimm, arg_32bit_zalimmlimm, arg_32bit_rbrc)
(arg_32bit_zarc, arg_32bit_rbu6, arg_32bit_zau6, arg_32bit_rblimm)
(arg_32bit_zalimm, arg_32bit_limmrc, arg_32bit_limmu6)
(arg_32bit_limms12, arg_32bit_limmlimm): Likewise.
opcodes/
2016-04-04 Claudiu Zissulescu <claziss@synopsys.com>
* arc-opc.c (flags_none, flags_f, flags_cc, flags_ccf):
Initialize.
(arg_none, arg_32bit_rarbrc, arg_32bit_zarbrc, arg_32bit_rbrbrc)
(arg_32bit_rarbu6, arg_32bit_zarbu6, arg_32bit_rbrbu6)
(arg_32bit_rbrbs12, arg_32bit_ralimmrc, arg_32bit_rarblimm)
(arg_32bit_zalimmrc, arg_32bit_zarblimm, arg_32bit_rbrblimm)
(arg_32bit_ralimmu6, arg_32bit_zalimmu6, arg_32bit_zalimms12)
(arg_32bit_ralimmlimm, arg_32bit_zalimmlimm, arg_32bit_rbrc)
(arg_32bit_zarc, arg_32bit_rbu6, arg_32bit_zau6, arg_32bit_rblimm)
(arg_32bit_zalimm, arg_32bit_limmrc, arg_32bit_limmu6)
(arg_32bit_limms12, arg_32bit_limmlimm): Likewise.
(arc_opcode arc_opcodes): Null terminate the array.
(arc_num_opcodes): Remove.
* arc-ext.h (INSERT_XOP): Define.
(extInstruction_t): Likewise.
(arcExtMap_instName): Delete.
(arcExtMap_insn): New function.
(arcExtMap_genOpcode): Likewise.
* arc-ext.c (ExtInstruction): Remove.
(create_map): Zero initialize instruction fields.
(arcExtMap_instName): Remove.
(arcExtMap_insn): New function.
(dump_ARC_extmap): More info while debuging.
(arcExtMap_genOpcode): New function.
* arc-dis.c (find_format): New function.
(print_insn_arc): Use find_format.
(arc_get_disassembler): Enable dump_ARC_extmap only when
debugging.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
|
|
Add some new control instructions to the opcodes library, and a new test
for these new instructions to the assembler. The new instructions use
an instruction flag longer than any seen before (on arc), and so the max
flag length is extended to accommodate this.
gas/ChangeLog:
* config/tc-arc.h (MAX_FLAG_NAME_LENGTH): Increase to 7.
* testsuite/gas/arc/nps400-2.d: New file.
* testsuite/gas/arc/nps400-2.s: New file.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add schd, sync, and hwschd instructions.
* arc-opc.c (arc_flag_operands): Add new flags.
(arc_flag_classes): Add new classes.
|
|
This commit completes support for having multiple instructions with the
same mnemonic in non-contiguous blocks within the arc_opcodes table.
The commit adds an iterator mechanism for the arc_opcode_hash_entry
structure, which is then used in find_opcode_match to consider all
arc_opcode entries with the same mnemonic, even when these instructions
are stored in non-contiguous blocks.
I extend the comment on the arc_opcodes table to discuss how entries
within the table are organised, and to mention how instructions can be
split into multiple groups if needed, but that the table is still
searched in table order.
There should be no user visible changes after this commit.
gas/ChangeLog:
* config/tc-arc.c (struct arc_opcode_hash_entry_iterator): New
structure.
(arc_opcode_hash_entry_iterator_init): New function.
(arc_opcode_hash_entry_iterator_next): New function.
(find_opcode_match): Iterate over all arc_opcode entries
referenced by the arc_opcode_hash_entry passed in as a parameter.
opcodes/ChangeLog:
* arc-opc.c (arc_opcodes): Extend comment to discus table layout.
|
|
Adds the movbi, decode1, fbset, fbclear, encode0, encode1, rflt, crc16,
and crc32 instructions for the nps400 arc machine type.
gas/ChangeLog:
* testsuite/gas/arc/nps400-1.d: Update expected results.
* testsuite/gas/arc/nps400-1.s: Additional test cases.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add movbi, decode1, fbset, fbclear, encode0,
encode1, rflt, crc16, and crc32 instructions.
* arc-opc.c (arc_flag_operands): Add F_NPS_R.
(arc_flag_classes): Add C_NPS_R.
(insert_nps_bitop_size_2b): New function.
(extract_nps_bitop_size_2b): Likewise.
(insert_nps_bitop_uimm8): Likewise.
(extract_nps_bitop_uimm8): Likewise.
(arc_operands): Add new operand entries.
|
|
opcodes/
2016-04-05 Claudiu Zissulescu <claziss@synopsys.com>
* arc-regs.h: Add a new subclass field. Add double assist
accumulator register values.
* arc-tbl.h: Use DPA subclass to mark the double assist
instructions. Use DPX/SPX subclas to mark the FPX instructions.
* arc-opc.c (RSP): Define instead of SP.
(arc_aux_regs): Add the subclass field.
include/
2016-04-05 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (DPA, DPX, SPX): New subclass enums.
(ARC_FPUDA): Define.
(arc_aux_reg): Add new field.
gas/
2016-04-05 Claudiu Zissulescu <claziss@synopsys.com>
* config/tc-arc.c (is_code_density_p): Compare directly the
subclass field.
(is_spfp_p, is_dpfp_p, is_spfp_p): Define.
(check_cpu_feature): New function.
(find_opcode_match): Use check_cpu_feature function.
(preprocess_operands): Likewise.
(md_parse_option): Use mfpuda, mdpfp, mspfp options.
* testsuite/gas/arc/tdpfp.d: New file.
* testsuite/gas/arc/tfpuda.d: Likewise.
* testsuite/gas/arc/tfpx.s: Likewise.
|
|
Some operands accidentally had the ARC_OPERAND_NCHK flag (due to copy &
paste mistake), meaning the operand value was skipping the overflow
check before being inserted. This commit removes the unwanted flags.
opcodes/ChangeLog:
* arc-opc.c (arc_operands): Fix operand flags for NPS_R_DST, and
NPS_R_SRC1.
|
|
gas/
2016-03-29 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/ext2op.d: New file.
* testsuite/gas/arc/ext2op.s: Likewise.
* testsuite/gas/arc/ext3op.d: Likewise.
* testsuite/gas/arc/ext3op.s: Likewise.
opcodes/
2016-03-29 Claudiu Zissulescu <claziss@synopsys.com>
* arc-tbl.h (invld07): Remove.
* arc-ext-tbl.h: New file.
* arc-dis.c (FIELDA, FIELDB, FIELDC): Remove.
* arc-opc.c (arc_opcodes): Add ext-tbl include.
include/
2016-03-29 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (insn_subclass_t): Add QUARKSE subclass.
(FIELDA, FIELDB, FIELDC, FIELDF, FIELDQ, INSN3OP, INSN2OP)
(INSN2OP, INSN3OP_ABC, INSN3OP_ALC, INSN3OP_ABL, INSN3OP_ALL)
(INSN3OP_0BC, INSN3OP_0LC, INSN3OP_0BL, INSN3OP_0LL, INSN3OP_ABU)
(INSN3OP_ALU, INSN3OP_0BU, INSN3OP_0LU, INSN3OP_BBS, INSN3OP_0LS)
(INSN3OP_CBBC, INSN3OP_CBBL, INSN3OP_C0LC, INSN3OP_C0LL)
(INSN3OP_CBBU, INSN3OP_C0LU, MINSN3OP_ABC, MINSN3OP_ALC)
(MINSN3OP_ABL, MINSN3OP_ALL, MINSN3OP_0BC, MINSN3OP_0LC)
(MINSN3OP_0BL, MINSN3OP_0LL, MINSN3OP_ABU, MINSN3OP_ALU)
(MINSN3OP_0BU, MINSN3OP_0LU, MINSN3OP_BBS, MINSN3OP_0LS)
(MINSN3OP_CBBC, MINSN3OP_CBBL, MINSN3OP_C0LC, MINSN3OP_C0LL)
(MINSN3OP_CBBU, MINSN3OP_C0LU, INSN2OP_BC, INSN2OP_BL, INSN2OP_0C)
(INSN2OP_0L INSN2OP_BU, INSN2OP_0U, MINSN2OP_BC, MINSN2OP_BL)
(MINSN2OP_0C, MINSN2OP_0L, MINSN2OP_BU, MINSN2OP_0U): Define.
|
|
Adds the first few nps400 instructions.
gas/ChangeLog:
* testsuite/gas/arc/nps400-0.d: New file.
* testsuite/gas/arc/nps400-0.s: New file.
* testsuite/gas/arc/nps400-1.d: New file.
* testsuite/gas/arc/nps400-1.s: New file.
include/ChangeLog:
* opcodes/arc.h (insn_class_t): Add BITOP type.
opcodes/ChangeLog:
* arc-nps400-tbl.h: New file.
* arc-opc.c: Add top level comment.
(insert_nps_3bit_dst): New function.
(extract_nps_3bit_dst): New function.
(insert_nps_3bit_src2): New function.
(extract_nps_3bit_src2): New function.
(insert_nps_bitop_size): New function.
(extract_nps_bitop_size): New function.
(arc_flag_operands): Add nps400 entries.
(arc_flag_classes): Add nps400 entries.
(arc_operands): Add nps400 entries.
(arc_opcodes): Add nps400 include.
|
|
When parsing the operand instruction flags we don't currently detect the
case where multiple flags are provided from the same class set, these
will be accepted and the bit values merged together, resulting in the
wrong instruction being assembled. For example:
adc.n.eq r0,r0,r2
Will assemble without error, yet, upon disassembly, the instruction will
actually be:
adc.c r0,r0,r2
In a later commit the concept of required flags will be introduced.
Required flags are just like normal instruction flags, except that they
must be present for the instruction to match. Adding this will allow
for simpler instructions in the instruction table, and allow for more
sharing of operand extraction and insertion functions.
To solve both of the above issues (multiple flags being invalid, and
required flags), this commit reworks the flag class mechanism.
Currently the flag class is never used. Each instruction can reference
multiple flag classes, each flag class has a class type and a set of
flags. However, at present, the class type is never used. The current
values identify the type of instruction that the flag will be used in,
but this is not required information.
Instead, this commit discards the old flag classes, and introduces 3 new
classes. The first F_CLASS_NONE, is just a NULL marker value, and is
only used in the NULL marker flag class. The other two flag classes are
F_FLAG_OPTIONAL, and F_FLAG_REQUIRED.
The class F_FLAG_OPTIONAL has the property that at most one of the flags
in the flag set for that class must be present in the instruction. The
"at most" one means that no flags being present is fine.
The class F_FLAG_REQUIRED is not currently used, but will be soon. With
this class, exactly one of the flags from this class must be present in
the instruction. If the flag class contains a single flag, then of
course that flag must be present. However, if the flag class contained
two or more, then one, and only one of them must be present.
gas/ChangeLog:
* config/tc-arc.c (find_opcode_match): Move lnflg, and i
declarations to start of block. Reset code on all flags before
attempting to match them. Handle multiple hits on the same flag.
Handle flag class.
* testsuite/gas/arc/asm-errors.d: New file.
* testsuite/gas/arc/asm-errors.err: New file.
* testsuite/gas/arc/asm-errors.s: New file.
include/ChangeLog:
* opcode/arc.h (flag_class_t): Remove all old flag classes, add 3
new classes instead.
opcodes/ChangeLog:
* arc-opc.c (arc_flag_classes): Convert all flag classes to use
the new class enum values.
|
|
This commit restructures the selection of the default cpu/mach so that
the choice is made from md_begin (if the user has not provided a command
line choice). This will reduce the amount of change needed in a later
patch.
At the request of Synopsys, the default architecture changes to ARC700
from this commit, previously the default was a non-existent
super-architecture that contained all instructions from all arc
variants. There's some clean up associated with removing the default
merged architecture, and a small test fix now that the default is
ARC700.
binutils/ChangeLog:
* testsuite/binutils-all/objdump.exp (cpus_expected): Add ARC700
to the architecture list.
gas/ChangeLog:
* config/tc-arc.c (arc_target): Delay initialisation until
arc_select_cpu.
(arc_target_name): Likewise.
(arc_features): Likewise.
(arc_mach_type): Likewise.
(cpu_types): Remove "all" entry.
(arc_select_cpu): New function, most of the content is from...
(md_parse_option): ... here. Call new arc_select_cpu.
(md_begin): Call arc_select_cpu if needed, default is now arc700.
include/ChangeLog:
* opcode/arc.h (ARC_OPCODE_BASE): Delete.
opcodes/ChangeLog:
* arc-opc.c (BASE): Delete.
|
|
gas/
2016-01-26 Claudiu Zissulescu <claziss@synopsys.com>
Janek van Oirschot <jvanoirs@synopsys.com>
* config/tc-arc.h (TC_FRAG_TYPE, TC_PCREL_ADJUST, MAX_INSN_ARGS)
(MAX_INSN_FLGS, MAX_FLAG_NAME_LENGHT, TC_GENERIC_RELAX_TABLE):
Define.
(arc_flags, arc_relax_type): New structure.
* config/tc-arc.c (FRAG_MAX_GROWTH, RELAX_TABLE_ENTRY)
(RELAX_TABLE_ENTRY_MAX): New define.
(relaxation_state, md_relax_table, arc_relaxable_insns)
(arc_num_relaxable_ins): New variable.
(rlx_operand_type, arc_rlx_types): New enums.
(arc_relaxable_ins): New structure.
(OPTION_RELAX): New option.
(arc_insn): New relax member.
(arc_flags): Remove.
(relax_insn_p): New function.
(apply_fixups): Likewise.
(relaxable_operand): Likewise.
(may_relax_expr): Likewise.
(relaxable_flag): Likewise.
(arc_pcrel_adjust): Likewise.
(md_estimate_size_before_relax): Implement.
(md_convert_frag): Likewise.
(md_parse_option): Handle new mrelax option.
(md_show_usage): Likewise.
(assemble_insn): Set relax member.
(emit_insn0): New function.
(emit_insn1): Likewise.
(emit_insn): Handle relaxation case.
* NEWS: Mention the new relaxation option.
* doc/c-arc.texi (ARC Options): Document new mrelax option.
gas/testsuite
2016-01-26 Claudiu Zissulescu <claziss@synopsys.com>
* gas/arc/relax-avoid1.d: New file.
* gas/arc/relax-avoid1.s: Likewise.
* gas/arc/relax-avoid2.d: Likewise.
* gas/arc/relax-avoid2.s: Likewise.
* gas/arc/relax-avoid3.d: Likewise.
* gas/arc/relax-avoid3.s: Likewise.
* gas/arc/relax-b.d: Likewise.
* gas/arc/relax-b.s: Likewise.
include/opcode/
2016-01-26 Claudiu Zissulescu <claziss@synopsys.com>
Janek van Oirschot <jvanoirs@synopsys.com>
* arc.h (arc_opcode arc_relax_opcodes, arc_num_relax_opcodes):
Declare.
opcodes/
2016-01-26 Claudiu Zissulescu <claziss@synopsys.com>
Janek van Oirschot <jvanoirs@synopsys.com>
* arc-opc.c (arc_relax_opcodes, arc_num_relax_opcodes): New
variable.
|
|
|