aboutsummaryrefslogtreecommitdiff
path: root/gdbsupport
AgeCommit message (Collapse)AuthorFilesLines
2020-07-30Unify Solaris procfs and largefile handlingRainer Orth6-37/+101
GDB currently doesn't build on 32-bit Solaris: * On Solaris 11.4/x86: In file included from /usr/include/sys/procfs.h:26, from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24: /usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment" #error "Cannot use procfs in the large file compilation environment" ^~~~~ * On Solaris 11.3/x86 there are several more instances of this. The interaction between procfs and large-file support historically has been a royal mess on Solaris: * There are two versions of the procfs interface: ** The old ioctl-based /proc, deprecated and not used any longer in either gdb or binutils. ** The `new' (introduced in Solaris 2.6, 1997) structured /proc. * There are two headers one can possibly include: ** <procfs.h> which only provides the structured /proc, definining _STRUCTURED_PROC=1 and then including ... ** <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based /proc, but provides structured /proc if _STRUCTURED_PROC == 1. * procfs and the large-file environment didn't go well together: ** Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit compilations when the large-file environment was active (_FILE_OFFSET_BITS == 64). ** In both Solaris 11.4 and Illumos, this restriction was lifted for structured /proc. So one has to be careful always to define _STRUCTURED_PROC=1 when testing for or using <sys/procfs.h> on Solaris. As the errors above show, this isn't always the case in binutils-gdb right now. Also one may need to disable large-file support for 32-bit compilations on Solaris. config/largefile.m4 meant to do this by wrapping the AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because it neglects the _STRUCTURED_PROC part. To make things even worse, since GCC 9 g++ predefines _FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to enable large-file support, this has no effect, breaking the gdb build. This patch addresses all this as follows: * All tests for the <sys/procfs.h> header are made with _STRUCTURED_PROC=1, the definition going into the various config.h files instead of having to make them (and sometimes failing) in the affected sources. * To cope with the g++ predefine of _FILE_OFFSET_BITS=64, -U_FILE_OFFSET_BITS is added to various *_CPPFLAGS variables. It had been far easier to have just #undef _FILE_OFFSET_BITS in config.h, but unfortunately such a construct in config.in is commented by config.status irrespective of indentation and whitespace if large-file support is disabled. I found no way around this and putting the #undef in several global headers for bfd, binutils, ld, and gdb seemed way more invasive. * Last, the applicability check in largefile.m4 was modified only to disable largefile support if really needed. To do so, it checks if <sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it doesn't, the disabling only happens if gdb exists in-tree and isn't disabled, otherwise (building binutils from a tarball), there's no conflict. What initially confused me was the check for $plugins here, which originally caused the disabling not to take place. Since AC_PLUGINGS does enable plugin support if <dlfcn.h> exists (which it does on Solaris), the disabling never happened. I could find no explanation why the linker plugin needs large-file support but thought it would be enough if gld and GCC's lto-plugin agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not enough: lto-plugin uses the simple-object interface from libiberty, which includes off_t arguments. So to fully disable large-file support would mean also disabling it in libiberty and its users: gcc and libstdc++-v3. This seems highly undesirable, so I decided to disable the linker plugin instead if large-file support won't work. The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to predefined _FILE_OFFSET_BITS=64). Also regtested on amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4), x86_64-pc-linux-gnu and i686-pc-linux-gnu. config: * largefile.m4 (ACX_LARGEFILE) <sparc-*-solaris*|i?86-*-solaris*>: Check for <sys/procfs.h> incompatilibity with large-file support on Solaris. Only disable large-file support and perhaps plugins if needed. Set, substitute LARGEFILE_CPPFLAGS if so. bfd: * bfd.m4 (BFD_SYS_PROCFS_H): New macro. (BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H. Don't define _STRUCTURED_PROC. (BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise. * elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define. * configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>. * configure, config.in: Regenerate. * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. binutils: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. * configure: Regenerate. gas: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. * configure: Regenerate. gdb: * proc-api.c (_STRUCTURED_PROC): Don't define. * proc-events.c: Likewise. * proc-flags.c: Likewise. * proc-why.c: Likewise. * procfs.c: Likewise. * Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * configure, config.in: Regenerate. gdbserver: * configure, config.in: Regenerate. gdbsupport: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>. * Makefile.in: Regenerate. * configure, config.in: Regenerate. gnulib: * configure.ac: Run ACX_LARGEFILE before gl_EARLY. * configure: Regenerate. gprof: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in: Regenerate. * configure: Regenerate. ld: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in: Regenerate. * configure: Regenerate.
2020-07-28[gdb/build] Fix Wmaybe-uninitialized in gdb_optional.hTom de Vries2-0/+8
When building with CFLAGS/CXXFLAGS="-O2 -g -Wall", we run into: ... In file included from src/gdb/exceptions.h:23, from src/gdb/utils.h:24, from src/gdb/defs.h:630, from src/gdb/record-btrace.c:22: src/gdb/ui-out.h: In function 'void btrace_insn_history(ui_out*, \ const btrace_thread_info*, const btrace_insn_iterator*, \ const btrace_insn_iterator*, gdb_disassembly_flags)': src/gdb/ui-out.h:352:18: warning: \ 'asm_list.ui_out_emit_type<ui_out_type_list>::m_uiout' may be used \ uninitialized in this function [-Wmaybe-uninitialized] 352 | m_uiout->end (Type); | ~~~~~~~~~~~~~^~~~~~ src/gdb/record-btrace.c:795:35: note: \ 'asm_list.ui_out_emit_type<ui_out_type_list>::m_uiout' was declared here 795 | gdb::optional<ui_out_emit_list> asm_list; | ^~~~~~~~ ... This is reported as PR gcc/80635 - "[8/9/10/11 regression] std::optional and bogus -Wmaybe-uninitialized warning". Silence the warning by using the workaround suggested here ( https://gcc.gnu.org/bugzilla/show_bug.cgi?id=80635#c53 ): ... union { struct { } m_dummy; T m_item; + volatile char dont_use; // Silences -Wmaybe-uninitialized warning. }; ... Build on x86_64-linux. gdbsupport/ChangeLog: 2020-07-28 Tom de Vries <tdevries@suse.de> PR build/26281 * gdb_optional.h (class optional): Add volatile member to union contaning m_dummy and m_item.
2020-07-17gdb/riscv: delete target descriptions when gdb exitsAndrew Burgess2-0/+20
It was pointed out on IRC that the RISC-V target allocates target descriptions and stores them in a global map, and doesn't delete these target descriptions when GDB shuts down. This isn't a particular problem, the total number of target descriptions we can create is very limited so creating these on demand and holding them for the entire run on GDB seems reasonable. However, not deleting these objects on GDB exit means extra warnings are printed from tools like valgrind, and the address sanitiser, making it harder to spot real issues. As it's reasonably easy to have GDB correctly delete these objects on exit, lets just do that. I started by noticing that we already have a target_desc_up type, a wrapper around unique_ptr that calls a function that will correctly delete target descriptions, so I want to use that, but.... ...that type is declared in gdb/target-descriptions.h. If I try to include that file in gdb/arch/riscv.c I run into a problem, that file is compiled into both GDB and GDBServer. OK, I could guard the include with #ifdef, but surely we can do better. So then I decided to move the target_desc_up type into gdbsupport/tdesc.h, this is the interface file for generic code shared between GDB and GDBserver (relating to target descriptions). The actual implementation for the delete function still lives in gdb/target-description.c, but now gdb/arch/riscv.c can see the declaration. Problem solved.... ... but, though RISC-V doesn't use it I've now exposed the target_desc_up type to gdbserver, so in future someone _might_ start using it, which is fine, except right now there's no definition of the delete function - remember the delete I used is only defined in GDB code. No problem, I add an implementation of the delete operator into gdbserver/tdesc.cc, and all is good..... except.... I start getting this error from GCC: tdesc.cc:109:10: error: deleting object of polymorphic class type ‘target_desc’ which has non-virtual destructor might cause undefined behavior [-Werror=delete-non-virtual-dtor] Which is caused because gdbserver's target_desc type inherits from tdesc_element which has a virtual method, and so GCC worries that target_desc might be used as a base class. The solution is to declare gdbserver's target_desc class as final. This is fine so long as we never intent to inherit from target_desc (in gdbserver). But if we did then we'd want to make target_desc's destructor virtual anyway, so the error above would be resolved, and there wouldn't be an issue. gdb/ChangeLog: * arch/riscv.c (riscv_tdesc_cache): Change map type. (riscv_lookup_target_description): Return pointer out of unique_ptr. * target-descriptions.c (allocate_target_description): Add comment. (target_desc_deleter::operator()): Likewise. * target-descriptions.h (struct target_desc_deleter): Moved to gdbsupport/tdesc.h. (target_desc_up): Likewise. gdbserver/ChangeLog: * tdesc.cc (allocate_target_description): Add header comment. (target_desc_deleter::operator()): New function. * tdesc.h (struct target_desc): Declare as final. gdbsupport/ChangeLog: * tdesc.h (struct target_desc_deleter): Moved here from gdb/target-descriptions.h, extend comment. (target_desc_up): Likewise.
2020-06-30Do not define basic_string_view::to_stringTom Tromey2-7/+16
gdb's copy of basic_string_view includes a to_string method. However, according to cppreference, this is not a method on the real std::basic_string_view: https://en.cppreference.com/w/cpp/string/basic_string_view This difference matters because gdb_string_view.h will use the standard implementation when built with a C++17 or later. This caused PR build/26183. This patch fixes the problem by changing the method to be a standalone helper function, and then rewriting the uses. Tested by rebuilding with a version of GCC that defaults to C++17. (Note that the build still is not clean; and also I noticed that the libstdc++ string_view forbids the use of nullptr ... I wonder if gdb violates that.) gdb/ChangeLog 2020-06-30 Tom Tromey <tromey@adacore.com> PR build/26183: * ada-lang.c (ada_lookup_name_info::ada_lookup_name_info): Use gdb::to_string. gdbsupport/ChangeLog 2020-06-30 Tom Tromey <tromey@adacore.com> PR build/26183: * gdb_string_view.h (basic_string_view::to_string): Remove. (gdb::to_string): New function.
2020-06-27gdbsupport: add format attribute to print_xml_feature::add_lineSimon Marchi2-1/+6
Fixes this clang error: CXX tdesc.o /home/smarchi/src/binutils-gdb/gdbsupport/tdesc.cc:444:25: error: format string is not a string literal [-Werror,-Wformat-nonliteral] string_vappendf (tmp, fmt, ap); ^~~ There is already a but about GCC not emitting this warning: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82206 gdbsupport/ChangeLog: * tdesc.h (class print_xml_feature) <add_line>: Add ATTRIBUTE_PRINTF. Change-Id: I7014075e83717f6d7e19d044a3675ff9981ebe17
2020-06-23gdb: New maintenance command to print XML target descriptionAndrew Burgess3-33/+107
This commit adds a new maintenance command that dumps the current target description as an XML document. This is a maintenance command as I currently only see this being useful for GDB developers, or for people debugging a new remote target. By default the command will print whatever the current target description is, whether this was delivered by the remote, loaded by the user from a file, or if it is a built in target within GDB. The command can also take an optional filename argument. In this case GDB loads a target description from the file, and then reprints it. This could be useful for testing GDB's parsing of target descriptions, or to check that GDB can successfully parse a particular XML description. It is worth noting that the XML description printed will not be an exact copy of the document fed into GDB. For example this minimal input file: <target> <feature name="abc"> <reg name="r1" bitsize="32"/> </feature> </target> Will produce this output: (gdb) maint print xml-tdesc path/to/file.xml <?xml version="1.0"?> <!DOCTYPE target SYSTEM "gdb-target.dtd"> <target> <feature name="abc"> <reg name="r1" bitsize="32" type="int" regnum="0"/> </feature> </target> Notice that GDB filled in both the 'type' and 'regnum' fields of the <reg>. I think this is actually a positive as it means we get to really understand how GDB processed the document, if GDB made some assumptions that differ to those the user expected then hopefully this will bring those issues to the users attention. To implement this I have tweaked the output produced by the print_xml_feature which is defined within the gdbsupport/ directory. The changes I have made to this class are: 1. The <architecture>...</architecture> tags are now not produced if the architecture name is NULL. 2. The <osabi>...</osabi> tags get a newline at the end. 3. And, the whole XML document is indented using white space in a nested fashion (as in the example output above). I think that these changes should be fine, the print_xml_feature class is used: 1. In gdbserver to generate an XML document to send as the target description to GDB. 2. In GDB as part of a self-check function, a target_desc is converted to XML then parsed back into a target_desc. We then check the before and after target_desc objects are the same. 3. In the new 'maint print xml-tdesc' command. In all of these use cases adding the extra white space should be fine. gdbsupport/ChangeLog: * tdesc.cc (print_xml_feature::visit_pre): Use add_line to add output content, and call indent as needed in all overloaded variants. (print_xml_feature::visit_post): Likewise. (print_xml_feature::visit): Likewise. (print_xml_feature::add_line): Two new overloaded functions. * tdesc.h (print_xml_feature::indent): New member function. (print_xml_feature::add_line): Two new overloaded member functions. (print_xml_feature::m_depth): New member variable. gdb/ChangeLog: * target-descriptions.c (tdesc_architecture_name): Protect against NULL pointer dereference. (maint_print_xml_tdesc_cmd): New function. (_initialize_target_descriptions): Register new 'maint print xml-tdesc' command and give it the filename completer. * NEWS: Mention new 'maint print xml-tdesc' command. gdb/testsuite/ChangeLog: * gdb.xml/tdesc-reload.c: New file. * gdb.xml/tdesc-reload.exp: New file. * gdb.xml/maint-xml-dump-01.xml: New file. * gdb.xml/maint-xml-dump-02.xml: New file. * gdb.xml/maint-xml-dump.exp: New file. gdb/doc/ChangeLog: * gdb.texinfo (Maintenance Commands): Document new 'maint print xml-desc' command.
2020-06-23gdb: Print compatible information within print_xml_featureAndrew Burgess3-0/+36
The gdbsupport directory contains a helper class print_xml_feature that is shared between gdb and gdbserver. This class is used for printing an XML representation of a target_desc object. Currently this class doesn't have the ability to print the <compatible> entities that can appear within a target description, I guess no targets have needed that functionality yet. The print_xml_feature classes API is based around operating on the target_desc class, however, the sharing between gdb and gdbserver is purely textural, we rely on their being a class called target_desc in both gdb and gdbserver, but there is no shared implementation. We then have a set of functions declared that operate on an object of type target_desc, and again these functions have completely separate implementations. Currently then the gdb version of target_desc contains a vector of bfd_arch_info pointers which represents the compatible entries from a target description. The gdbserver version of target_desc has no such information. Further, the gdbserver code doesn't seem to include the bfd headers, and so doesn't know about the bfd types. I was reluctant to include the bfd headers into gdbserver just so I can reference the compatible information, which isn't (currently) even needed in gdbserver. So, the approach I take in this patch is to wrap the compatible information into a new helper class. This class is declared in the gdbsupport library, but implemented separately in both gdb and gdbserver. In gdbserver the class is empty. The compatible information within the gdbserver is an empty list, of empty classes. In gdb the class contains a pointer to the bfd_arch_info object. With this in place we can now add support to print_xml_feature for printing the compatible information if it is present. In the gdbserver code this will never happen, as the gdbserver never has any compatible information. But in gdb, this code will trigger when appropriate. gdb/ChangeLog: * target-descriptions.c (class tdesc_compatible_info): New class. (struct target_desc): Change type of compatible vector. (tdesc_compatible_p): Update for change in type of target_desc::compatible. (tdesc_compatible_info_list): New function. (tdesc_compatible_info_arch_name): New function. (tdesc_add_compatible): Update for change in type of target_desc::compatible. (print_c_tdesc::visit_pre): Likewise. gdbserver/ChangeLog: * tdesc.cc (struct tdesc_compatible_info): New struct. (tdesc_compatible_info_list): New function. (tdesc_compatible_info_arch_name): New function. gdbsupport/ChangeLog: * tdesc.cc (print_xml_feature::visit_pre): Print compatible information. * tdesc.h (struct tdesc_compatible_info): Declare new struct. (tdesc_compatible_info_up): New typedef. (tdesc_compatible_info_list): Declare new function. (tdesc_compatible_info_arch_name): Declare new function.
2020-05-25gdbsupport: Drop now unused function 'stringify_argv'Michael Weghorn3-27/+5
The function did not properly escape special characters and all uses have been replaced in previous commits, so drop the now unused function. gdbsupport/ChangeLog: * common-utils.cc, common-utils.h (stringify_argv): Drop now unused function stringify_argv Change-Id: Id5f861f44eae1f0fbde3476a5eac23a842ed04fc
2020-05-25gdbsupport: Let construct_inferior_arguments take gdb::array_view paramMichael Weghorn3-10/+17
Adapt the construct_inferior_arguments function to take a gdb::array_view<char * const> parameter instead of a char * array and an int indicating the length and adapt the only call site. This will allow calling it more simply in a follow-up patch introducing more uses of the function. gdbsupport/ChangeLog: * common-inferior.cc, common-inferior.h (construct_inferior_arguments): Adapt to take a gdb::array_view<char * const> parameter. Adapt call site. Change-Id: I1c6496c8c0b0eb3ef3fda96e9e3bd64c5e6cac3c
2020-05-25gdbsupport: Adapt construct_inferior_argumentsMichael Weghorn3-44/+29
Allow construct_inferior_arguments to handle zero args and have it return a std::string, similar to how stringify_argv in gdbsupport/common-utils does. Also, add a const qualifier for the second parameter, since it is only read, not written to. The intention is to replace existing uses of stringify_argv by construct_inferior_arguments in a subsequent step, since construct_inferior_arguments properly handles special characters, while stringify_argv doesn't. gdbsupport/ChangeLog: * common-inferior.cc, common-inferior.h (construct_inferior_arguments): Adapt to handle zero args and return a std::string. Adapt call site. Change-Id: I126c4390a1018c7527b0b8fd545252ab8a5a7adc
2020-05-25gdb: Move construct_inferior_arguments to gdbsupportMichael Weghorn3-0/+131
This moves the function construct_inferior_arguments from gdb/inferior.h and gdb/infcmd.c to gdbsupport/common-inferior.{h,cc}. While at it, also move the function's comment to the header file to align with current standards. The intention is to use it from gdbserver in a follow-up commit. gdb/ChangeLog: * infcmd.c, inferior.h: (construct_inferior_arguments): Moved function from here to gdbsupport/common-inferior.{h,cc} gdbsupport/ChangeLog: * common-inferior.h, common-inferior.cc: (construct_inferior_arguments): Move function here from gdb/infcmd.c, gdb/inferior.h Change-Id: Ib9290464ce8c0872f605d8829f88352d064c30d6
2020-05-23Use safe-ctype.h (ISSPACE etc.) in symbol parsing & comparisonPedro Alves1-0/+46
This patch avoids depending on the current locale when parsing & comparing symbol names, by using libiberty's safe-ctype.h uppercase TOLOWER, ISXDIGIT, etc. macros instead of the standard ctype.h tolower, isxdigit, etc. macros/functions. This commit: commit b1b60145aedb8adcb0b9dcf43a5ae735c2f03b51 Author: Pedro Alves <palves@redhat.com> AuthorDate: Tue May 22 17:35:38 2018 +0100 Support UTF-8 identifiers in C/C++ expressions (PR gdb/22973) did something similar, except in the expression parser. This can improve GDB's symbol loading performance significantly. Currently strcmp_iw_ordered can show up high on profiles (called from sort_pst_symbols -> std::sort) because of the isspace and tolower functions. Hannes mentions seeing it as high as in ~24% of the profiling samples on Windows (https://sourceware.org/pipermail/gdb-patches/2020-May/168858.html). I tested GDB's performance (built with "-g -O2") loading a "-g -O0" build of gdb. I ran GDB 10 times like: /bin/time -f %e \ ./gdb/gdb --data-directory ./gdb/data-directory -nx \ -batch /tmp/gdb-g-O0 Then I computed the mean time. The baseline mean time was gdb 2.515 This patch brings the number down to gdb 2.096 Which is an around 16% improvement. gdb/ChangeLog: 2020-05-23 Pedro Alves <palves@redhat.com> * utils.c: Include "gdbsupport/gdb-safe-ctype.h". (parse_escape): Use ISDIGIT instead of isdigit. (puts_debug): Use gdb_isprint instead of isprint. (fprintf_symbol_filtered): Use ISALNUM instead of isalnum. (cp_skip_operator_token, skip_ws, strncmp_iw_with_mode): Use ISSPACE instead of isspace. (strncmp_iw_with_mode): Use TOLOWER instead of tolower and ISSPACE instead of isspace. (strcmp_iw_ordered): Use ISSPACE instead of isspace. (string_to_core_addr): Use TOLOWER instead of tolower, ISXDIGIT instead of isxdigit and ISDIGIT instead of isdigit. gdbsupport/ChangeLog: 2020-05-23 Pedro Alves <palves@redhat.com> * gdb-safe-ctype.h: New.
2020-05-14Disable record btrace bts support for AMD processorsKevin Buettner2-1/+8
Some Intel processors implement a Branch Trace Store (BTS) which GDB uses for reverse execution support via the "record btrace bts" command. I have been unable to find a description of a similar feature in a recent (April 2020) AMD64 architecture reference: https://www.amd.com/system/files/TechDocs/40332.pdf While it is the case that AMD processors have an LBR (last branch record) bit in the DebugCtl MSR, it seems that it affects only four MSRs when enabled. The names of these MSRs are LastBranchToIP, LastBranchFromIP, LastIntToIP, and LastIntFromIP. I can find no mention of anything more extensive. While looking at an Intel architecture document, I noticed that Intel's P6 family from the mid-90s had registers of the same name. Therefore... This commit disables "record btrace bts" support in GDB for AMD processors. Using the test case from gdb.base/break.exp, the sessions below show the expected behavior (run on a machine with an Intel processor) versus that on a machine with an AMD processor. The AMD processor in question is reported as follows by "lscpu": AMD Ryzen Threadripper 2950X 16-Core Processor . Finally, I'll note that the AMD machine is actually a VM, but I see similar behavior on both the virtualization host and the VM. Intel machine - Desired behavior: [kevinb@mohave gdb]$ ./gdb -q testsuite/outputs/gdb.base/break/break Reading symbols from testsuite/outputs/gdb.base/break/break... (gdb) start Temporary breakpoint 1 at 0x401179: file /home/kevinb/sourceware-git/native-build/bld/../../binutils-gdb/gdb/testsuite/gdb.base/break.c, line 43. Starting program: /home/kevinb/sourceware-git/native-build/bld/gdb/testsuite/outputs/gdb.base/break/break Temporary breakpoint 1, main (argc=1, argv=0x7fffffffd748, envp=0x7fffffffd758) at /home/kevinb/sourceware-git/native-build/bld/../../binutils-gdb/gdb/testsuite/gdb.base/break.c:43 43 if (argc == 12345) { /* an unlikely value < 2^16, in case uninited */ /* set breakpoint 6 here */ (gdb) record btrace (gdb) b factorial Breakpoint 2 at 0x40121b: file /home/kevinb/sourceware-git/native-build/bld/../../binutils-gdb/gdb/testsuite/gdb.base/break.c, line 63. (gdb) c Continuing. Breakpoint 2, factorial (value=6) at /home/kevinb/sourceware-git/native-build/bld/../../binutils-gdb/gdb/testsuite/gdb.base/break.c:63 63 if (value > 1) { /* set breakpoint 7 here */ (gdb) info record Active record target: record-btrace Recording format: Branch Trace Store. Buffer size: 64kB. Recorded 768 instructions in 22 functions (0 gaps) for thread 1 (process 19215). (gdb) record function-call-history 13 do_lookup_x 14 _dl_lookup_symbol_x 15 _dl_fixup 16 _dl_runtime_resolve_xsavec 17 atoi 18 strtoq 19 ____strtoll_l_internal 20 atoi 21 main 22 factorial (gdb) record instruction-history 759 0x00007ffff7ce0917 <____strtoll_l_internal+647>: pop %r15 760 0x00007ffff7ce0919 <____strtoll_l_internal+649>: retq 761 0x00007ffff7cdd064 <atoi+20>: add $0x8,%rsp 762 0x00007ffff7cdd068 <atoi+24>: retq 763 0x00000000004011b1 <main+75>: mov %eax,%edi 764 0x00000000004011b3 <main+77>: callq 0x401210 <factorial> 765 0x0000000000401210 <factorial+0>: push %rbp 766 0x0000000000401211 <factorial+1>: mov %rsp,%rbp 767 0x0000000000401214 <factorial+4>: sub $0x10,%rsp 768 0x0000000000401218 <factorial+8>: mov %edi,-0x4(%rbp) AMD machine - Wrong behavior: [kev@f32-1 gdb]$ ./gdb -q testsuite/outputs/gdb.base/break/break Reading symbols from testsuite/outputs/gdb.base/break/break... (gdb) start Temporary breakpoint 1 at 0x401179: file /ironwood1/sourceware-git/f32-master/bld/../../worktree-master/gdb/testsuite/gdb.base/break.c, line 43. Starting program: /mesquite2/sourceware-git/f32-master/bld/gdb/testsuite/outputs/gdb.base/break/break Temporary breakpoint 1, main (argc=1, argv=0x7fffffffd5b8, envp=0x7fffffffd5c8) at /ironwood1/sourceware-git/f32-master/bld/../../worktree-master/gdb/testsuite/gdb.base/break.c:43 43 if (argc == 12345) { /* an unlikely value < 2^16, in case uninited */ /* set breakpoint 6 here */ (gdb) record btrace (gdb) b factorial Breakpoint 2 at 0x40121b: file /ironwood1/sourceware-git/f32-master/bld/../../worktree-master/gdb/testsuite/gdb.base/break.c, line 63. (gdb) c Continuing. Breakpoint 2, factorial (value=6) at /ironwood1/sourceware-git/f32-master/bld/../../worktree-master/gdb/testsuite/gdb.base/break.c:63 63 if (value > 1) { /* set breakpoint 7 here */ (gdb) info record Active record target: record-btrace Recording format: Branch Trace Store. Buffer size: 64kB. warning: Recorded trace may be incomplete at instruction 7737 (pc = 0x405000). warning: Recorded trace may be incomplete at instruction 7739 (pc = 0x0). Recorded 7740 instructions in 46 functions (2 gaps) for thread 1 (process 1402911). (gdb) record function-call-history 37 ?? 38 values 39 some_enum_global 40 ?? 41 some_union_global 42 some_variable 43 ?? 44 [decode error (2): unknown instruction] 45 ?? 46 [decode error (2): unknown instruction] (gdb) record instruction-history 7730 0x0000000000404ff3: add %al,(%rax) 7731 0x0000000000404ff5: add %al,(%rax) 7732 0x0000000000404ff7: add %al,(%rax) 7733 0x0000000000404ff9: add %al,(%rax) 7734 0x0000000000404ffb: add %al,(%rax) 7735 0x0000000000404ffd: add %al,(%rax) 7736 0x0000000000404fff: .byte 0x0 7737 0x0000000000405000: Cannot access memory at address 0x405000 Lastly, I'll note that I see a lot of gdb.btrace failures without this commit. Worse still, the results aren't always the same which causes a lot of noise when comparing test results. gdbsupport/ChangeLog: * btrace-common.h (btrace_cpu_vendor): Add CV_AMD. gdb/ChangeLog: * nat/linux-btrace.c (btrace_this_cpu): Add check for AMD processors. (cpu_supports_bts): Add CV_AMD case.
2020-05-14gdb: protect some 'regcache_read_pc' callsTankut Baris Aktemur2-0/+10
It possible that a thread whose PC we attempt to read is already dead. In this case, 'regcache_read_pc' errors out. This impacts the "proceed" execution flow, where GDB quits early before having a chance to check if there exists a pending event. To remedy, keep going with a 0 value for the PC if 'regcache_read_pc' fails. Because the value of PC before resuming a thread is mostly used for storing and checking the next time the thread stops, this tolerance is expected to be harmless for a dead thread/process. gdb/ChangeLog: 2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * regcache.c (regcache_read_pc_protected): New function implementation that returns 0 if the PC cannot read via 'regcache_read_pc'. * infrun.c (proceed): Call 'regcache_read_pc_protected' instead of 'regcache_read_pc'. (keep_going_pass_signal): Ditto. gdbsupport/ChangeLog: 2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * common-regcache.h (regcache_read_pc_protected): New function declaration.
2020-04-28Fix typo (thead -> thread)Tankut Baris Aktemur2-1/+5
gdb/stubs/ChangeLog: 2020-04-28 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * ia64vms-stub.c: Fix typo in comment (thead -> thread). gdb/testsuite/ChangeLog: 2020-04-28 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * gdb.threads/stop-with-handle.exp: Fix typo in comment (theads -> threads). gdbsupport/ChangeLog: 2020-04-28 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * gdb-sigmask.h: Fix typo (pthead_sigmask -> pthread_sigmask).
2020-04-27gdbsupport: include cstdlib in common-defs.hSimon Marchi2-0/+9
In PR 25731 [1], the following build failure was reported: ../../binutils-gdb/gdb/gdbtypes.c:1254:10: error: no member named 'abs' in namespace 'std'; did you mean simply 'abs'? = ((std::abs (stride) * element_count) + 7) / 8; ^~~~~~~~ abs /usr/include/stdlib.h:129:6: note: 'abs' declared here int abs(int) __pure2; ^ The original report was using: $ gcc -v Apple LLVM version 8.0.0 (clang-800.0.42.1) Target: x86_64-apple-darwin15.6.0 Note that I was _not_ able to reproduce using: $ g++ --version Configured with: --prefix=/Applications/Xcode.app/Contents/Developer/usr --with-gxx-include-dir=/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/c++/4.2.1 Apple clang version 11.0.0 (clang-1100.0.33.17) Target: x86_64-apple-darwin19.3.0 The proposed fix is to include <cstdlib> in addition to <stdlib.h>. Here's an excerpt of [2] relevant to this problem: These headers [speaking of the .h form] are allowed to also declare the same names in the std namespace, and the corresponding cxxx headers are allowed to also declare the same names in the global namespace: including <cstdlib> definitely provides std::malloc and may also provide ::malloc. Including <stdlib.h> definitely provides ::malloc and may also provide std::malloc Since we use std::abs, we should not assume that our include of stdlib.h declares an `abs` function in the `std` namespace. If we replace the include of stdlib.h with cstdlib, then we fall in the opposite situation. A standard C++ library may decide to only put the declarations in the std namespace, requiring us to prefix all standard functions with `std::`. I'm not against that, but for the moment I think the safest way forward is to just include both. Note that I don't know what effect this patch can have on any stdlib.h fix provided by gnulib. [1] https://sourceware.org/bugzilla/show_bug.cgi?id=25731 [2] https://en.cppreference.com/w/cpp/header#C_compatibility_headers gdbsupport/ChangeLog: * common-defs.h: Include cstdlib.h.
2020-04-20Mark move constructors as "noexcept"Tom Tromey4-8/+14
I recently learned that move constructors generally should be marked "noexcept". This ensures that standard containers will move objects when possible, rather than copy them. This patch fixes the cases I could find. Note that implicitly-defined or defaulted move constructors will automatically do what you'd expect; that is, they are noexcept if all the members have noexcept move constructors. While doing this, I noticed a couple of odd cases where the move constructor seemed to assume that the object being constructed could have state requiring destruction. I've fixed these as well. See completion_result and scoped_mmap. gdb/ChangeLog 2020-04-20 Tom Tromey <tromey@adacore.com> * python/python.c (struct gdbpy_event): Mark move constructor as noexcept. * python/py-tui.c (class gdbpy_tui_window_maker): Mark move constructor as noexcept. * completer.h (struct completion_result): Mark move constructor as noexcept. * completer.c (completion_result::completion_result): Use initialization style. Don't call reset_match_list. gdbsupport/ChangeLog 2020-04-20 Tom Tromey <tromey@adacore.com> * scoped_mmap.h (scoped_mmap): Mark move constructor as noexcept. Use initialization style. Don't call destroy. * scoped_fd.h (class scoped_fd): Mark move constructor as noexcept. * gdb_ref_ptr.h (class ref_ptr): Mark move constructor as noexcept.
2020-04-13Move gdb_notifier commentTom Tromey2-11/+12
This moves the gdb_notifier comment a bit lower in event-loop.c, to where it belongs; and removes an obsolete comment that Pedro pointed out. gdbsupport/ChangeLog 2020-04-13 Tom Tromey <tom@tromey.com> * event-loop.c: Move comment. Remove obsolete comment.
2020-04-13Move event-loop.[ch] to gdbsupport/Tom Tromey5-10/+1009
This moves event-loop.[ch] to gdbsupport/ and updates the uses in gdb. gdb/ChangeLog 2020-04-13 Tom Tromey <tom@tromey.com> * run-on-main-thread.c: Update include. * unittests/main-thread-selftests.c: Update include. * tui/tui-win.c: Update include. * tui/tui-io.c: Update include. * tui/tui-interp.c: Update include. * tui/tui-hooks.c: Update include. * top.h: Update include. * top.c: Update include. * ser-base.c: Update include. * remote.c: Update include. * remote-notif.c: Update include. * remote-fileio.c: Update include. * record-full.c: Update include. * record-btrace.c: Update include. * python/python.c: Update include. * posix-hdep.c: Update include. * mingw-hdep.c: Update include. * mi/mi-main.c: Update include. * mi/mi-interp.c: Update include. * main.c: Update include. * linux-nat.c: Update include. * interps.c: Update include. * infrun.c: Update include. * inf-loop.c: Update include. * event-top.c: Update include. * event-loop.c: Move to ../gdbsupport/. * event-loop.h: Move to ../gdbsupport/. * async-event.h: Update include. * Makefile.in (COMMON_SFILES, HFILES_NO_SRCDIR): Update. gdbsupport/ChangeLog 2020-04-13 Tom Tromey <tom@tromey.com> * event-loop.h: Move from ../gdb/. * event-loop.cc: Move from ../gdb/.
2020-04-13Introduce and use flush_streamsTom Tromey2-0/+8
Code in gdbsupport can't call gdb_flush, so this introduces a new "flush_streams" function that must be supplied by the client. Note that the similar gdb_flush_out_err exists, but it isn't defined in quite the same way, so it wasn't clear to me whether the two could be merged. gdb/ChangeLog 2020-04-13 Tom Tromey <tom@tromey.com> * utils.c (flush_streams): New function. * event-loop.c (gdb_wait_for_event): Call flush_streams. gdbsupport/ChangeLog 2020-04-13 Tom Tromey <tom@tromey.com> * errors.h (flush_streams): Declare.
2020-04-13Move gdb_select.h to gdbsupport/Tom Tromey2-0/+55
This moves gdb_select.h to gdbsupport/, so it can be used by other code there. gdb/ChangeLog 2020-04-13 Tom Tromey <tom@tromey.com> * gdb_select.h: Move to ../gdbsupport/. * event-loop.c: Update include path. * top.c: Update include path. * ser-base.c: Update include path. * ui-file.c: Update include path. * ser-tcp.c: Update include path. * guile/scm-ports.c: Update include path. * posix-hdep.c: Update include path. * ser-unix.c: Update include path. * gdb_usleep.c: Update include path. * mingw-hdep.c: Update include path. * inflow.c: Update include path. * infrun.c: Update include path. * event-top.c: Update include path. gdbsupport/ChangeLog 2020-04-13 Tom Tromey <tom@tromey.com> * gdb_select.h: Move from ../gdb/.
2020-04-13Move event-loop configury to common.m4Tom Tromey4-4/+23
gdb_select.h and the event loop require some configure checks, so this moves the needed checks to common.m4 and updates the configure scripts. gdb/ChangeLog 2020-04-13 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Remove checks that are now in GDB_AC_COMMON. gdbserver/ChangeLog 2020-04-13 Tom Tromey <tom@tromey.com> * configure: Rebuild. * config.in: Rebuild. gdbsupport/ChangeLog 2020-04-13 Tom Tromey <tom@tromey.com> * config.in, configure: Rebuild. * common.m4 (GDB_AC_COMMON): Check for poll.h, sys/poll.h, sys/select.h, and poll.
2020-03-31Don't pass NULL to memcpy in gdbTom Tromey2-1/+7
I compiled gdb with -fsanitize=undefined and ran the test suite. A couple of reports came from passing NULL to memcpy, e.g.: [...]btrace-common.cc:176:13: runtime error: null pointer passed as argument 2, which is declared to never be null While it would be better to fix this in the standard, in the meantime it seems easy to avoid this error. gdb/ChangeLog 2020-03-31 Tom Tromey <tromey@adacore.com> * dwarf2/abbrev.c (abbrev_table::read): Conditionally call memcpy. gdbsupport/ChangeLog 2020-03-31 Tom Tromey <tromey@adacore.com> * btrace-common.cc (btrace_data_append): Conditionally call memcpy.
2020-03-27gdbsupport: Resolve shellcheck issues in create-version.sh scriptAndrew Burgess2-8/+14
Run shellcheck (version 0.4.7) on the create-version.sh script, and resolve the issues it highlighter - they all seemed reasonable. gdbsupport/ChangeLog: * create-version.sh: Resolve issues highlighted by shellcheck.
2020-03-20gdb: remove HAVE_DECL_PTRACESimon Marchi3-24/+5
I stumbled on this snippet in nat/gdb_ptrace.h: /* Some systems, in particular DEC OSF/1, Digital Unix, Compaq Tru64 or whatever it's called these days, don't provide a prototype for ptrace. Provide one to silence compiler warnings. */ #ifndef HAVE_DECL_PTRACE extern PTRACE_TYPE_RET ptrace(); #endif I believe this is unnecessary today and should be removed. First, the comment only mentions OSes we don't support (and to be honest, I had never even heard of). But most importantly, in C++, a declaration with empty parenthesis declares a function that accepts no arguments, unlike in C. So if this declaration was really used, GDB wouldn't build, since all ptrace call sites pass some arguments. Since we haven't heard anything about this causing some build failures since we have transitioned to C++, I conclude that it's not used. This patch removes it as well as the corresponding configure check. gdb/ChangeLog: * ptrace.m4: Don't check for ptrace declaration. * config.in: Re-generate. * configure: Re-generate. * nat/gdb_ptrace.h: Don't declare ptrace if HAVE_DECL_PTRACE is not defined. gdbserver/ChangeLog: * config.in: Re-generate. * configure: Re-generate. gdbsupport/ChangeLog: * config.in: Re-generate. * configure: Re-generate.
2020-03-18Include <alloca.h> conditionallyKamil Rytarowski2-0/+6
Fixes build on NetBSD, where alloca() is defined in <stdlib.h>. gdbsupport: * common-defs.h: Include alloca.h if HAVE_ALLOCA_H is defined.
2020-03-12Change gdbsupport not to rely on BFDTom Tromey3-43/+11
This changes gdbsupport so that it no longer relies on BFD. This is a precursor to making gdbserver use the already-built gdbsupport, because building gdbserver should not require BFD to be built. The most notable change here is that CORE_ADDR is always a 64-bit type. This makes it so that gdb acts as if it were always built in 64-bit mode. ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * Makefile.in: Rebuild. * Makefile.def (gdbsupport): Don't depend on bfd. gdbsupport/ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * common-types.h: Remove GDBSERVER code. (gdb_byte, CORE_ADDR, LONGEST, ULONGEST): Redefine. * common-defs.h: Remove GDBSERVER code.
2020-03-12Move gdb/selftest.m4 to gdbsupport/selftest.m4Simon Marchi4-3/+57
The selftest.m4 file is used by gdb, gdbserver and gdbsupport, I think it belongs in gdbsupport. gdb/ChangeLog: * selftest.m4: Move to gdbsupport/. * acinclude.m4: Update path to selftest.m4. gdbserver/ChangeLog: * acinclude.m4: Update path to selftest.m4. gdbsupport/ChangeLog: * selftest.m4: Moved from gdb/. * acinclude.m4: Update path to selftest.m4.
2020-03-12Move sourcing of development.sh to GDB_AC_COMMONSimon Marchi4-7/+14
The same is done for gdb, gdbserver and gdbsupport. I therefore think it makes sense to move that to GDB_AC_COMMON. It is required to move the call to GDB_AC_COMMON so it is before GDB_AC_SELFTEST in gdbserver/configure.ac, otherwise the $development variable isn't set when the code behind GDB_AC_SELFTEST executes. gdb/ChangeLog: * configure.ac: Don't source bfd/development.sh. * selftest.m4: Modify comment. * configure: Re-generate. gdbserver/ChangeLog: * configure.ac: Don't source bfd/development.sh, move GDB_AC_COMMON higher. * configure: Re-generate. gdbsupport/ChangeLog: * configure.ac: Don't source bfd/development.sh. * common.m4: Source bfd/development.sh. * configure: Re-generate.
2020-03-12gdb/selftest.m4: ensure $development is setSimon Marchi2-0/+9
Before commit 3d1e5a43cbe ("gdbsupport/configure.ac: source development.sh"), the GDB build in non-development mode (turn development to false in bfd/development.sh if you want to try) was broken because the gdbsupport configure script didn't source bfd/development.sh to set the development variable. Since the GDB_AC_SELFTEST macro relies on the `development` variable, I propose to modify it such that it errors out if $development does not have an expected value of "true" or "false". This could prevent a future similar problem from happening while refactoring the configure scripts. It would have caught the problem fixed by the patch mentioned earlier. gdb/ChangeLog: * selftest.m4 (GDB_AC_SELFTEST): Error out if $development is not "true" or "false". * configure: Re-generate. gdbserver/ChangeLog: * configure: Re-generate. gdbsupport/ChangeLog: * configure: Re-generate.
2020-03-11gdb: enable -Wmissing-prototypes warningSimon Marchi3-0/+7
While compiling with clang, I noticed it didn't catch cases where my function declaration didn't match my function definition. This is normally caught by gcc with -Wmissing-declarations. On clang, this is caught by -Wmissing-prototypes instead. Note that on gcc, -Wmissing-prototypes also exists, but is only valid for C and Objective-C. It gets correctly rejected by the configure script since gcc rejects it with: cc1plus: error: command line option '-Wmissing-prototypes' is valid for C/ObjC but not for C++ -Werror So this warning flag ends up not used for gcc (which is what we want). gdb/ChangeLog: * configure: Re-generate. gdbserver/ChangeLog: * configure: Re-generate. gdbsupport/ChangeLog: * configure: Re-generate. * warning.m4: Enable -Wmissing-prototypes.
2020-03-08Fix two typos in gdb_binary_search.hTom Tromey2-2/+6
I noticed a couple of typos in gdb_binary_search.h. This fixes them. gdbsupport/ChangeLog 2020-03-08 Tom Tromey <tom@tromey.com> * gdb_binary_search.h: Fix two typos.
2020-03-06gdbserver/gdbsupport: Add .dir-locals.el fileAndrew Burgess2-0/+45
Copy the .dir-locls.el file from gdb/ to gdbserver/ and gdbsupport/ so that we get the GNU/GDB style when editing these files in Emacs. I initially wanted to remove the (c-mode . ((mode . c++))) that switches c-mode files into c++-mode as we store C++ code in *.cc files in the gdbserver/ directory, unlike gdb/ where we use *.c, however, I was forgetting about the header files - we still use *.h for our C++ header files, so for now I left the settings in place to open all C files in c++-mode. We now have three copies of this file, which are all identical. It would be nice if we could remove this duplication, however, for now we haven't found a good way to do this. Some options considered were: 1. Use symlinks to only have one copy of the file. This was rejected as not all targets support symlinks in the way. 2. Have two of the .dir-locals.el files contain some mechanism by which the third copy of the file is sourced. Though this would, in theory, be possible, it would involve some advanced Emacs scripting, would be fragile, and a maintenance burdon. 3. Move the .dir-locals up into top level src/ directory, then use Emacs dir-locals directory pattern matching to only apply the rules for the three directories we care about. The problem is that each directory has to be listed separately, so we still end up having to duplicate all the rules. In the end, it was decided that having three copies of the file, though not ideal, is probably easiest for now. This was all discussed in this mailing list thread: https://sourceware.org/ml/gdb-patches/2020-03/msg00024.html The copyright date in the new files is left as for gdb/.dir-locals.el, as the new files are a copy of the old, this is inline with this rule: https://sourceware.org/gdb/wiki/ContributionChecklist#Copyright_Header gdb/ChangeLog: * .dir-locals.el: Add a comment referencing the other copies of this file. gdbserver/ChangeLog: * .dir-locals.el: New file. gdbsupport/ChangeLog: * .dir-locals.el: New file.
2020-03-05gdbsupport/configure.ac: source development.shVyacheslav Petrishchev3-0/+11
[Commit message by Simon Marchi] The GDB build in non-development mode (turn development to false in bfd/development.sh if you want to try) is currently broken: CXXLD gdb /home/smarchi/src/binutils-gdb/gdb/disasm-selftests.c:218: error: undefined reference to 'selftests::register_test_foreach_arch(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, void (*)(gdbarch*))' /home/smarchi/src/binutils-gdb/gdb/disasm-selftests.c:220: error: undefined reference to 'selftests::register_test_foreach_arch(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, void (*)(gdbarch*))' /home/smarchi/src/binutils-gdb/gdb/dwarf2/frame.c:2310: error: undefined reference to 'selftests::register_test_foreach_arch(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, void (*)(gdbarch*))' /home/smarchi/src/binutils-gdb/gdb/gdbarch-selftests.c:168: error: undefined reference to 'selftests::register_test_foreach_arch(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, void (*)(gdbarch*))' /home/smarchi/src/binutils-gdb/gdbsupport/selftest.cc:96: error: undefined reference to 'selftests::reset()' This is because the gdbsupport configure script doesn't source bfd/development.sh to set the development variable. When $development is unset, GDB_AC_SELFTEST defaults to enabling selftests. I don't think the macro was written with this intention in mind, it just happens to be that way. So gdbsupport thinks selftests are enabled, while gdb thinks they are disabled. gdbsupport compiles in code that calls selftests:: functions, which are normally provided by gdb, but gdb doesn't provide them, hence the undefined references. Fix this by sourcing bfd/development.sh in gdbsupport/configure.ac, so that the development variable is set. gdbsupport/ChangeLog: * configure.ac: Added call development.sh. * configure: Regenerate.
2020-03-05gdb, gdbserver, gdbsupport: add .gitattributes filesTankut Baris Aktemur2-0/+10
Create .gitattributes files in gdb/, gdbserver/, and gdbsupport/. The files specify cpp-style diffs for .h and .c files. This is particularly helpful if a class in a header file is modified. For instance, if the `stop_requested` field of `thread_info` in gdb/gdbthread.h is modified, we get the following diff with 'git diff' (using git version 2.17.1): @@ -379,7 +379,7 @@ public: struct target_waitstatus pending_follow; /* True if this thread has been explicitly requested to stop. */ - int stop_requested = 0; + bool stop_requested = 0; /* The initiating frame of a nexting operation, used for deciding which exceptions to intercept. If it is null_frame_id no Note that the context of the change shows up as 'public:'; not so useful. With the .gitattributes file, we get: @@ -379,7 +379,7 @@ class thread_info : public refcounted_object struct target_waitstatus pending_follow; /* True if this thread has been explicitly requested to stop. */ - int stop_requested = 0; + bool stop_requested = 0; /* The initiating frame of a nexting operation, used for deciding which exceptions to intercept. If it is null_frame_id no The context is successfully shown as 'class thread_info'. This patch creates a .gitattributes file per each of gdb, gdbserver, and gdbsupport folders. An alternative would be to define the attributes in the root folder -- this would impact all the top-level folders, though. I opted for the more conservative approach. gdb/ChangeLog: 2020-03-05 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * .gitattributes: New file. gdbserver/ChangeLog: 2020-03-05 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * .gitattributes: New file. gdbsupport/ChangeLog: 2020-03-05 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> * .gitattributes: New file.
2020-03-03gdbsupport: re-generate Makefile.inSimon Marchi2-1/+7
It looks like after doing last minute changes to Makefile.am in commit 06b3c5bdb ("gdbsupport: rename source files to .cc"), I forgot to re-generate Makefile.in. This patch fixes it. gdbsupport/ChangeLog: * Makefile.in: Re-generate.
2020-02-28Fix comment for 'gdb_dlopen'Sergio Durigan Junior2-2/+6
The 'gdb_dlopen' function doesn't return NULL if the shlib load fails; it actually throws an error. This patch updates the comment to reflect this. gdbsupport/ChangeLog: 2020-02-28 Sergio Durigan Junior <sergiodj@redhat.com> * gdb-dlfcn.h (gdb_dlopen): Update comment.
2020-02-19Merge changes from GCC for the config/ directoryAndrew Burgess2-6/+27
GCC's config/ChangeLog since the last time this merge was done (in the binutils-gdb commit 0b4d000cc4e8e77c823) is included at the end of this commit message. It is worth noting that the binutils-gdb commit 301a9420d947da1458 added the file config/debuginfod.m4 which is not present in GCC's config/ directory. This file is preserved, unmodified, after this commit. In order to regenerate all of the configure files, I configured with --enable-maintainer-mode, and built the 'all' target. I then did the same thing on a source tree without this patch, and only committed those files that changed when this patch was added. GCC's config/ChangeLog entries: 2020-02-12 Sandra Loosemore <sandra@codesourcery.com> PR libstdc++/79193 PR libstdc++/88999 * no-executables.m4: Use a non-empty program to test for linker support. 2020-02-01 Andrew Burgess <andrew.burgess@embecosm.com> * lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Update shell syntax. 2020-01-27 Andrew Burgess <andrew.burgess@embecosm.com> * lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Add new --with-libXXX-type=... option. Use this to guide the selection of either a shared library or a static library. 2020-01-24 Maciej W. Rozycki <macro@wdc.com> * toolexeclibdir.m4: New file. 2019-09-10 Christophe Lyon <christophe.lyon@st.com> * futex.m4: Handle *-uclinux*. * tls.m4 (GCC_CHECK_TLS): Likewise. 2019-09-06 Florian Weimer <fweimer@redhat.com> * futex.m4 (GCC_LINUX_FUTEX): Include <unistd.h> for the syscall function. 2019-07-08 Richard Sandiford <richard.sandiford@arm.com> * bootstrap-Og.mk: New file. 2019-06-25 Kwok Cheung Yeung <kcy@codesourcery.com> Andrew Stubbs <ams@codesourcery.com> * gthr.m4 (GCC_AC_THREAD_HEADER): Add case for gcn. 2019-05-30 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE> * ax_count_cpus.m4: New file. 2019-05-02 Richard Biener <rguenther@suse.de> PR bootstrap/85574 * bootstrap-lto.mk (extra-compare): Set to gcc/lto1$(exeext). 2019-04-16 Martin Liska <mliska@suse.cz> * bootstrap-lto-lean.mk: Filter out -flto in STAGEtrain_CFLAGS. 2019-04-09 Martin Liska <mliska@suse.cz> * bootstrap-lto-lean.mk: New file. 2019-03-02 Johannes Pfau <johannespfau@gmail.com> * mh-mingw: Also set __USE_MINGW_ACCESS flag for C++ code. 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * math.m4, tls.m4: Use AC_LANG_SOURCE. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. config/ChangeLog: * ax_count_cpus.m4: New file, backported from GCC. * bootstrap-Og.mk: New file, backported from GCC. * bootstrap-lto-lean.mk: New file, backported from GCC. * bootstrap-lto.mk: Changes backported from GCC. * futex.m4: Changes backported from GCC. * gthr.m4: Changes backported from GCC. * lib-link.m4: Changes backported from GCC. * mh-mingw: Changes backported from GCC. * no-executables.m4: Changes backported from GCC. * tls.m4: Changes backported from GCC. * toolexeclibdir.m4: New file, backported from GCC. binutils/ChangeLog: * configure: Regenerate. gdb/ChangeLog: * configure: Regenerate. gdbserver/ChangeLog: * configure: Regenerate. gdbsupport/ChangeLog: * configure: Regenerate. intl/ChangeLog: * configure: Regenerate. libiberty/ChangeLog: * configure: Regenerate. zlib/ChangeLog.bin-gdb: * configure: Regenerate.
2020-02-14Change gdbserver to use existing gnulib and libibertyTom Tromey2-1/+5
This changes gdbserver so that it no longer builds its own gnulib and libiberty. Instead, it now relies on the ones that were already built at the top level. gdbsupport is still built specially for gdbserver. This is more complicated and will be tackled in a subsequent patch. ChangeLog 2020-02-14 Tom Tromey <tom@tromey.com> * Makefile.in: Rebuild. * Makefile.def: Make gdbserver require gnulib and libiberty. gdbserver/ChangeLog 2020-02-14 Tom Tromey <tom@tromey.com> * acinclude.m4: Don't include acx_configure_dir.m4. * Makefile.in (LIBIBERTY_BUILDDIR, GNULIB_BUILDDIR): Update. (SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): Remove. (all, install-only, uninstall, clean-info, clean) (maintainer-clean): Don't recurse. (subdir_do, all-lib): Remove. ($(LIBGNU) $(LIBIBERTY) $(GNULIB_H)): Remove rule. (GNULIB_H): Remove. (generated_files): Update. ($(GNULIB_BUILDDIR)/Makefile): Remove rule. * configure: Rebuild. * configure.ac: Don't configure gnulib or libiberty. (GNULIB): Update. gdbsupport/ChangeLog 2020-02-14 Tom Tromey <tom@tromey.com> * common-defs.h: Change path to gnulib/config.h. Change-Id: I469cbbf5db2ab37109c058e9e3a1e4f4dabdfc98
2020-02-13gdbsupport: rename source files to .ccSimon Marchi37-103/+105
This patch renames the .c source files in gdbsupport to .cc. In the gdb directory, there is an argument against renaming the source files, which is that it makes using some git commands more difficult to do archeology. Some commands have some kind of "follow" option that makes git try to follow renames, but it doesn't work in all situations. Given that we have just moved the gdbsupport directory, that argument doesn't hold for source files in that directory. I therefore suggest renaming them to .cc, so that they are automatically recognized as C++ by various tools and editors. The original motivation behind this is that when building gdbsupport with clang, I get: CC agent.o clang: error: treating 'c' input as 'c++' when in C++ mode, this behavior is deprecated [-Werror,-Wdeprecated] In the gdb/ directory, we make clang happy by passing "-x c++". We could do this in gdbsupport too, but I think that renaming the files is a better long-term solution. gdbserver still does its own build of gdbsupport, so a few changes in its Makefile are necessary. gdbsupport/ChangeLog: * Makefile.am: Rename source files from .c to .cc. (CC, CFLAGS): Don't override. (AM_CFLAGS): Rename to ... (AM_CXXFLAGS): ... this. * Makefile.in: Re-generate. * %.c: Rename to %.cc. gdbserver/ChangeLog: * Makefile.in: Rename gdbsupport source files from .c to .cc.
2020-02-11Re-generate gdb/gdbserver/gdbsupport configure scriptsSimon Marchi2-1/+6
In my previous commit, I did a last minute modification of warning.m4, but forgot to re-generate the configure scripts, this commit fixes that. gdb/ChangeLog: * configure: Re-generate. gdbserver/ChangeLog: * configure: Re-generate. gdbsupport/ChangeLog: * configure: Re-generate.
2020-02-11Add -Wstrict-null-sentinel to gdbsupport/warning.m4Simon Marchi3-2/+10
Commit 85f0dd3ce ("[gdb] Fix -Wstrict-null-sentinel warnings") fixed some violations of -Wstrict-null-sentinel. If we want to enforce this warning, I think we should enable it in our warning.m4 file. gdbsupport/ChangeLog: * warning.m4: Add -Wstrict-null-sentinel. * configure: Re-generate. gdbserver/ChangeLog: * configure: Re-generate. gdb/ChangeLog: * configure: Re-generate.
2020-02-11Move gdb/warning.m4 to gdbsupportSimon Marchi4-2/+167
This file is used by gdbsupport, gdbserver and gdb, so I think it belongs in gdbsupport. Move it there and update the references the various acinclude.m4 files. gdbsupport/ChangeLog: * warning.m4: Move here, from gdb/warning.m4. * acinclude.m4: Update warning.m4 path. * Makefile.in: Re-generate. gdbserver/ChangeLog: * acinclude.m4: Update warning.m4 path. gdb/ChangeLog: * acinclude: Update warning.m4 path. * warning.m4: Move to gdbsupport.
2020-02-11gdbsupport: use AM_GDB_WARNINGSSimon Marchi6-1/+215
Since gdbsupport has been given its own build system, it is no longer compiled with the warning flags specified in gdb/warning.m4. This patch makes it use AM_GDB_WARNINGS. gdbsupport/ChangeLog: * acinclude.m4: Include ../gdb/warning.m4. * configure.ac: Use AM_GDB_WARNINGS. * Makefile.am: Set AM_CFLAGS to WARN_CFLAGS and WERROR_CFLAGS. * Makefile.in: Re-generate. * configure: Re-generate.
2020-02-10[gdb] Fix -Wstrict-null-sentinel warningsTom de Vries2-1/+5
When passed in CXXFLAGS, -Wstrict-null-sentinel triggers twice in a gdb/gdbserver build. Fix the two occurrences. Build and reg-tested on x86_64-linux. gdb/ChangeLog: 2020-02-10 Tom de Vries <tdevries@suse.de> * dwarf2/read.c (process_psymtab_comp_unit_reader): Cast concat NULL sentinel to char *. gdbsupport/ChangeLog: 2020-02-10 Tom de Vries <tdevries@suse.de> * environ.c (gdb_environ::set): Cast concat NULL sentinel to char *.
2020-01-24Support the NetBSD version of pthread_setname_npChristian Biesinger2-2/+15
On NetBSD, pthread_setname_np takes a printf-style format string plus one argument: https://netbsd.gw.com/cgi-bin/man-cgi?pthread_setname_np++NetBSD-current This patch makes thread-pool.c handle that. gdbsupport/ChangeLog: 2020-01-24 Christian Biesinger <cbiesinger@google.com> * thread-pool.c (set_thread_name): Add an overload for the NetBSD version of pthread_setname_np. Change-Id: I61e664a813eaa7f52b6811b1a43e08ac3082d8ef
2020-01-17Fix gdbsupport build on compilers that don't default to C++11 or abovePedro Alves3-0/+9
gdbsupport fails to build with compilers that don't default to C++11 or above. gdbsupport's configure.ac is already using AX_CXX_COMPILE_STDCXX, which sets CXX_DIALECT to the -std=gnu++11 switch if necessary, but the problem is that nowhere are we using CXX_DIALECT. This fixes it. gdbsupport/ChangeLog: 2020-01-17 Pedro Alves <palves@redhat.com> * Makefile.am: Append CXX_DIALECT to CXX. * Makefile.in: Regenerate.
2020-01-17Fix gdbsupport buildPedro Alves5-54/+62
I'm seeing this on F27 (a clean build from scratch): ~~~~~~~~~~~~~~~~~~~~~~~~~~~ make[3]: Entering directory '/home/pedro/brno/pedro/gdb/binutils-gdb/build/gdbsupport' CC gdb_tilde_expand.o In file included from /home/pedro/gdb/binutils-gdb/src/gdbsupport/../gnulib/import/libc-config.h:33:0, from ../gnulib/import/glob.h:544, from /home/pedro/gdb/binutils-gdb/src/gdbsupport/gdb_tilde_expand.c:22: ../bfd/config.h:7:4: error: #error config.h must be #included before system headers # error config.h must be #included before system headers ^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~ libc-config.h, where it includes config.h, says: ~~~~~~~~~~~~~~~~~~~~~~~~~~~ /* This is intended to be a good-enough substitute for glibc system macros like those defined in <sys/cdefs.h>, so that Gnulib code shared with glibc can do this as the first #include: #ifndef _LIBC # include <libc-config.h> #endif When compiled as part of glibc this is a no-op; when compiled as part of Gnulib this includes Gnulib's <config.h> and defines macros that glibc library code would normally assume. */ #include <config.h> ~~~~~~~~~~~~~~~~~~~~~~~~~~~ The issue is that that '#include <config.h>' picks up bfd's config.h instead of gnulib's. This problem doesn't trigger in the gdb dir because there we generate config.h under that exact name so gnulib's libc-config.h ends up picking gdb's config.h instead of gnulib.c and that ends up harmless. In gdbsupport, the config.h file is really named support-config.h, so that '#include <config.h>' in libc-config.h doesn't pick it like it would if it had the conventional config.h name. This patch fixes it by simply renaming gdbserver's support-config.h to config.h. gdbsupport/ChangeLog: 2020-01-17 Pedro Alves <palves@redhat.com> * configure.ac: Generate config.h instead of support-config.h. * common-defs.h: Include <gdbsupport/config.h> instead of <gdbsupport/support-config.h>. * Makefile.in: Regenerate. * configure: Regenerate.
2020-01-16Ensure proc-service symbols have default visibility (PR build/24805)Pedro Alves1-0/+29
Compiling GDB with '-fvisibility=hidden' removes the symbols that should be exported. This patch explicitly marks them as visible. gdb/ChangeLog: 2020-01-16 Pedro Alves <palves@redhat.com> Norbert Lange <nolange79@gmail.com> PR build/24805 * gdbsupport/gdb_proc_service.h (PS_EXPORT): New. (ps_get_thread_area, ps_getpid, ps_lcontinue, ps_lgetfpregs) (ps_lgetregs, ps_lsetfpregs, ps_lsetregs, ps_lstop, ps_pcontinue) (ps_pdread, ps_pdwrite, ps_pglobal_lookup, ps_pstop, ps_ptread) (ps_ptwrite, ps_lgetxregs, ps_lgetxregsize, ps_lsetxregs) (ps_plog): Redeclare exported functions with default visibility.
2020-01-14Add gdbsupport check-defines scriptTom Tromey4-0/+91
This adds a new script that tries to check that none of the support code uses defines that are not defined by common.m4. This check is necessarily inexact, but this script caught all the issues fixed in the previous patches. gdbsupport/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * Makefile.in: Rebuild. * Makefile.am (check-defines): New target. * check-defines.el: New file. Change-Id: I59450e91394d5e6a7fa59e9ab53c95843c4bacd9
generated by cgit v1.1 at 2024-09-27 09:07:56 +0000