| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This commit is the result of the following actions:
- Running gdb/copyright.py to update all of the copyright headers to
include 2024,
- Manually updating a few files the copyright.py script told me to
update, these files had copyright headers embedded within the
file,
- Regenerating gdbsupport/Makefile.in to refresh it's copyright
date,
- Using grep to find other files that still mentioned 2023. If
these files were updated last year from 2022 to 2023 then I've
updated them this year to 2024.
I'm sure I've probably missed some dates. Feel free to fix them up as
you spot them.
|
|
Since GDB now requires C++17, we don't need the internally maintained
gdb::optional implementation. This patch does the following replacing:
- gdb::optional -> std::optional
- gdb::in_place -> std::in_place
- #include "gdbsupport/gdb_optional.h" -> #include <optional>
This change has mostly been done automatically. One exception is
gdbsupport/thread-pool.* which did not use the gdb:: prefix as it
already lives in the gdb namespace.
Change-Id: I19a92fa03e89637bab136c72e34fd351524f65e9
Approved-By: Tom Tromey <tom@tromey.com>
Approved-By: Pedro Alves <pedro@palves.net>
|
|
This patch teaches gdbserver about the SME2 and the ZT0 register.
Since most of the code used by gdbserver for SME2 is shared with gdb, this
is a rather small patch that reuses most of the code put in place for native
AArch64 Linux.
Validated under Fast Models.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
|
|
Enable SME support in gdbserver by adjusting the usual fields. There is
not much to this patch because the code is either in gdb or it is shared
between gdbserver and gdb. One exception is the bump to gdbserver's
PBUFSIZ from 18432 to 131104.
Since the ZA register can be quite big (256 * 256 bytes), the g/G remote
packet will also become quite big
From gdbserver/tdesc.cc:init_target_desc, I estimated the new size should
be at least (2 * 256 * 256 + 32), which yields 131104.
It is also unlikely we will find a process starting up with SVL set to 256.
Ideally we'd adjust the packet size dynamically based on what we need, but
for now this should do.
Please note we have the same limitation for SME that we have for SVE, and
that is the fact gdbserver cannot communicate vector length changes to gdb
via the remote protocol.
Thiago is working on this improvement, which hopefully will be able to be
adapted to SME in an easy way.
Co-Authored-By: Ezra Sitorus <ezra.sitorus@arm.com>
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
|
|
This is a patch in preparation to upcoming patches enabling SME support. It
attempts to simplify the gdb/gdbserver shared interface used to read/write
SVE registers.
Where the current code makes use of unique_ptr, allocating a new buffer by
hand and passing a buffer around, this patch makes that code use
gdb::byte_vector and passes a reference to this byte vector to the functions,
allowing the functions to have ready access to the size of the buffer.
It also shares a bit more code between gdb and gdbserver, in particular around
handling of ptrace get/set requests for SVE.
I think gdbserver could be refactored to handle register reads/writes more
like gdb's native layer as opposed to letting the generic linux-low layer do
the ptrace calls. This is not very flexible and assumes one size for the
responses. If you have something like NT_ARM_SVE, where you can have either
FPSIMD or SVE contents, it doesn't work that well.
I didn't want to change that interface right now as it is a bit too much work
and touches all the targets, some of which I can't easily test.
Hence the reason why the buffer the generic linux-now passes down to
linux-aarch64-low is unused or ignored.
No user-visible changes should happen as part of this refactor other than a
slightly reworded warning message.
While doing the refactor, I also noticed what seems to be a mistake in checking
if the register cache contains active (non-zero) SVE data.
For instance, the original code did something like this in
aarch64_sve_regs_copy_from_reg_buf:
has_sve_state |= reg_buf->raw_compare (AARCH64_SVE_Z0_REGNUM + i
reg, sizeof (__int128_t));
"reg" is a zeroed-out buffer that we compare the Z register contents
past the first 128 bits. The problem here is that raw_compare returns
1 if the contents compare the same, which means has_sve_state will be
true. But if we compared the Z register contents to 0, it means we
*do not* have SVE state, and therefore has_sve_state should be false.
The consequence of this mistake is that we convert the initial
FPSIMD-formatted data we get from ptrace for the NT_ARM_SVE register
set to a SVE-formatted one.
In the end, this doesn't cause user-visible differences because the
values of both the Z and V registers will still be the same. But the
logic is not correct.
I used the opportunity to fix this, and it gets tested later on by
the additional SME tests.
I do plan on submitting some SVE-specific tests to make sure we have
a bit more coverage in GDB's testsuite.
Regression-tested on aarch64-linux Ubuntu 22.04/20.04.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
|
|
In preparation to the SME support patches, rename the SVE-specific files to
something a bit more meaningful that can be shared with the SME code.
In this case, I've renamed the "sve" in the names to "scalable".
No functional changes.
Regression-tested on aarch64-linux Ubuntu 22.04/20.04.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
|
|
I noticed in emit_ops_insns in gdbserver/linux-aarch64-low.cc:
...
threads_debug_printf ("Adding %d instrucions at %s",
...
Fix the typo by using "instructions" instead.
Reviewed-By: Tom Tromey <tom@tromey.com>
|
|
This patch doesn't change gdbserver behaviour, but after later changes are
made it avoids a null pointer dereference when HWCAP needs to be obtained
for a specific process while current_thread is nullptr.
Fixing linux_read_auxv, linux_get_hwcap and linux_get_hwcap2 to take a PID
parameter seems more correct than setting current_thread in one particular
code path.
Changes are propagated to allow passing the new parameter through the call
chain.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
This commit is the result of running the gdb/copyright.py script,
which automated the update of the copyright year range for all
source files managed by the GDB project to be updated to include
year 2023.
|
|
PR gdb/28947
The address_significant gdbarch setting was introduced as a way to remove
non-address bits from pointers, and it is specified by a constant. This
constant represents the number of address bits in a pointer.
Right now AArch64 is the only architecture that uses it, and 56 was a
correct option so far.
But if we are using Pointer Authentication (PAuth), we might use up to 2 bytes
from the address space to store the required information. We could also have
cases where we're using both PAuth and MTE.
We could adjust the constant to 48 to cover those cases, but this doesn't
cover the case where GDB needs to sign-extend kernel addresses after removal
of the non-address bits.
This has worked so far because bit 55 is used to select between kernel-space
and user-space addresses. But trying to clear a range of bits crossing the
bit 55 boundary requires the hook to be smarter.
The following patch renames the gdbarch hook from significant_addr_bit to
remove_non_address_bits and passes a pointer as opposed to the number of
bits. The hook is now responsible for removing the required non-address bits
and sign-extending the address if needed.
While at it, make GDB and GDBServer share some more code for aarch64 and add a
new arch-specific testcase gdb.arch/aarch64-non-address-bits.exp.
Bug-url: https://sourceware.org/bugzilla/show_bug.cgi?id=28947
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
With the AArch64 Scalable Matrix Extension we have a new TPIDR2 register, and
it will be added to the existing NT_ARM_TLS register set. Kernel patches are
being reviewed here:
https://lore.kernel.org/linux-arm-kernel/20220818170111.351889-1-broonie@kernel.org/
From GDB's perspective, we handle it in a similar way to the existing TPIDR
register. But we need to consider cases of systems that only have TPIDR and
systems that have both TPIDR and TPIDR2.
With that in mind, the following patch adds the required code to support
TPIDR2 and turns the org.gnu.gdb.aarch64.tls feature into a
dynamically-generated target description as opposed to a static target
description containing only TPIDR.
That means we can remove the gdb/features/aarch64-tls.xml file and replace the
existing gdb/features/aarch64-tls.c auto-generated file with a new file that
dynamically generates the target description containing either TPIDR alone or
TPIDR and TPIDR2.
In the future, when *BSD's start to support this register, they can just
enable it as is being done for the AArch64 Linux target.
The core file read/write code has been updated to support TPIDR2 as well.
On GDBserver's side, there is a small change to the find_regno function to
expose a non-throwing version of it.
It always seemed strange to me how find_regno causes the whole operation to
abort if it doesn't find a particular register name. The patch moves code
from find_regno into find_regno_no_throw and makes find_regno call
find_regno_no_throw instead.
This allows us to do register name lookups to find a particular register
number without risking erroring out if nothing is found.
The patch also adjusts the feature detection code for aarch64-fbsd, since
the infrastructure is shared amongst all aarch64 targets. I haven't added
code to support TPIDR2 in aarch64-fbsd though, as I'm not sure when/if
that will happen.
|
|
Replace the sve bool member of aarch64_features with a vq member that
holds the vector quotient. It is zero if SVE is not present.
Add std::hash<> specialization and operator== so that aarch64_features
can be used as a key with std::unordered_map<>.
Change the various functions that create or lookup aarch64 target
descriptions to accept a const aarch64_features object rather than a
growing number of arguments.
Replace the multi-dimension tdesc_aarch64_list arrays used to cache
target descriptions with unordered_maps indexed by aarch64_feature.
|
|
We're missing an argument.
|
|
Luis noticed that the recent changes to gdbserver to make it track
process and threads independently regressed a few gdb.multi/*.exp
tests for aarch64-linux.
We started seeing the following internal error for
gdb.multi/multi-target-continue.exp for example:
Starting program: binutils-gdb/gdb/testsuite/outputs/gdb.multi/multi-target-continue/multi-target-continue ^M
Error in re-setting breakpoint 2: Remote connection closed^M
../../../repos/binutils-gdb/gdb/thread.c:85: internal-error: inferior_thread: Assertion `current_thread_ != nullptr' failed.^M
A problem internal to GDB has been detected,^M
further debugging may prove unreliable.
A backtrace looks like:
#0 thread_regcache_data (thread=thread@entry=0x0) at ../../../repos/binutils-gdb/gdbserver/inferiors.cc:120
#1 0x0000aaaaaaabf0e8 in get_thread_regcache (thread=0x0, fetch=fetch@entry=0) at ../../../repos/binutils-gdb/gdbserver/regcache.cc:31
#2 0x0000aaaaaaad785c in is_64bit_tdesc () at ../../../repos/binutils-gdb/gdbserver/linux-aarch64-low.cc:194
#3 0x0000aaaaaaad8a48 in aarch64_target::sw_breakpoint_from_kind (this=<optimized out>, kind=4, size=0xffffffffef04) at ../../../repos/binutils-gdb/gdbserver/linux-aarch64-low.cc:3226
#4 0x0000aaaaaaabe220 in bp_size (bp=0xaaaaaab6f3d0) at ../../../repos/binutils-gdb/gdbserver/mem-break.cc:226
#5 check_mem_read (mem_addr=187649984471104, buf=buf@entry=0xaaaaaab625d0 "\006", mem_len=mem_len@entry=56) at ../../../repos/binutils-gdb/gdbserver/mem-break.cc:1862
#6 0x0000aaaaaaacc660 in read_inferior_memory (memaddr=<optimized out>, myaddr=0xaaaaaab625d0 "\006", len=56) at ../../../repos/binutils-gdb/gdbserver/target.cc:93
#7 0x0000aaaaaaac3d9c in gdb_read_memory (len=56, myaddr=0xaaaaaab625d0 "\006", memaddr=187649984471104) at ../../../repos/binutils-gdb/gdbserver/server.cc:1071
#8 gdb_read_memory (memaddr=187649984471104, myaddr=0xaaaaaab625d0 "\006", len=56) at ../../../repos/binutils-gdb/gdbserver/server.cc:1048
#9 0x0000aaaaaaac82a4 in process_serial_event () at ../../../repos/binutils-gdb/gdbserver/server.cc:4307
#10 handle_serial_event (err=<optimized out>, client_data=<optimized out>) at ../../../repos/binutils-gdb/gdbserver/server.cc:4520
#11 0x0000aaaaaaafbcd0 in gdb_wait_for_event (block=block@entry=1) at ../../../repos/binutils-gdb/gdbsupport/event-loop.cc:700
#12 0x0000aaaaaaafc0b0 in gdb_wait_for_event (block=1) at ../../../repos/binutils-gdb/gdbsupport/event-loop.cc:596
#13 gdb_do_one_event () at ../../../repos/binutils-gdb/gdbsupport/event-loop.cc:237
#14 0x0000aaaaaaacacb0 in start_event_loop () at ../../../repos/binutils-gdb/gdbserver/server.cc:3518
#15 captured_main (argc=4, argv=<optimized out>) at ../../../repos/binutils-gdb/gdbserver/server.cc:3998
#16 0x0000aaaaaaab66dc in main (argc=<optimized out>, argv=<optimized out>) at ../../../repos/binutils-gdb/gdbserver/server.cc:4084
This sequence of functions is invoked due to a series of conditions:
1 - The probe-based breakpoint mechanism failed (for some reason) so ...
2 - ... gdbserver has to know what type of architecture it is dealing
with so it can pick the right breakpoint kind, so it wants to
check if we have a 64-bit target.
3 - To determine the size of a register, we currently fetch the
current thread's register cache, and the current thread pointer
is now nullptr.
In #3, the current thread is nullptr because gdb_read_memory clears it
on purpose, via set_desired_process, exactly to expose code relying on
the current thread when it shouldn't. It was always possible to end
up in this situation (when the current thread exits), but it was
harder to reproduce before.
This commit fixes it by tweaking is_64bit_tdesc to look at the current
process's tdesc instead of the current thread's tdesc.
Note that the thread's tdesc is itself filled from the process's
tdesc, so this should be equivalent:
struct regcache *
get_thread_regcache (struct thread_info *thread, int fetch)
{
struct regcache *regcache;
regcache = thread_regcache_data (thread);
...
if (regcache == NULL)
{
struct process_info *proc = get_thread_process (thread);
gdb_assert (proc->tdesc != NULL);
regcache = new_register_cache (proc->tdesc);
set_thread_regcache_data (thread, regcache);
}
...
Change-Id: Ibc809d7345e70a2f058b522bdc5cdbdca97e2cdc
|
|
|
|
Move non-Linux-specific support for hardware break/watchpoints from
nat/aarch64-linux-hw-point.c to nat/aarch64-hw-point.c. Changes
beyond a simple split of the code are:
- aarch64_linux_region_ok_for_watchpoint and
aarch64_linux_any_set_debug_regs_state renamed to drop linux_ as
they are not platform specific.
- Platforms must implement the aarch64_notify_debug_reg_change
function which is invoked from the platform-independent code when a
debug register changes for a given debug register state. This does
not use the indirection of a 'low' structure as is done for x86.
- The handling for kernel_supports_any_contiguous_range is not
pristine. For non-Linux it is simply defined to true. Some uses of
this could perhaps be implemented as new 'low' routines for the
various places that check it instead?
- Pass down ptid into aarch64_handle_breakpoint and
aarch64_handle_watchpoint rather than using current_lwp_ptid which
is only defined on Linux. In addition, pass the ptid on to
aarch64_notify_debug_reg_change instead of the unused state
argument.
|
|
Add the threads_debug_printf and THREADS_SCOPED_DEBUG_ENTER_EXIT, which
use the logging infrastructure from gdbsupport/common-debug.h. Replace
all debug_print uses that are predicated by debug_threads with
threads_dethreads_debug_printf. Replace uses of the debug_enter and
debug_exit macros with THREADS_SCOPED_DEBUG_ENTER_EXIT, which serves
essentially the same purpose, but allows showing what comes between the
enter and the exit in an indented form.
Note that "threads" debug is currently used for a bit of everything in
GDBserver, not only threads related stuff. It should ideally be cleaned
up and separated logically as is done in GDB, but that's out of the
scope of this patch.
Change-Id: I2d4546464462cb4c16f7f1168c5cec5a89f2289a
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
The current register set selection mechanism for AArch64 is static, based
on a pre-populated array of register sets.
This means that we might potentially probe register sets that are not
available. This is OK if the kernel errors out during ptrace, but probing the
tag_ctl register, for example, does not result in a ptrace error if the kernel
supports the tagged address ABI but not MTE (PR 28355).
Making the register set selection dynamic, based on feature checks, solves
this and simplifies the code a bit. It allows us to list all of the register
sets only once, and pick and choose based on HWCAP/HWCAP2 or other properties.
I plan to backport this fix to GDB 11 as well.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28355
|
|
Adds the AArch64-specific memory tagging support (MTE) by implementing the
required hooks and checks for GDBserver.
gdbserver/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* Makefile.in (SFILES): Add /../gdb/nat/aarch64-mte-linux-ptrace.c.
* configure.srv (aarch64*-*-linux*): Add arch/aarch64-mte-linux.o and
nat/aarch64-mte-linux-ptrace.o.
* linux-aarch64-low.cc: Include nat/aarch64-mte-linux-ptrace.h.
(class aarch64_target) <supports_memory_tagging>
<fetch_memtags, store_memtags>: New method overrides.
(aarch64_target::supports_memory_tagging)
(aarch64_target::fetch_memtags)
(aarch64_target::store_memtags): New methods.
|
|
AArch64 MTE support in the Linux kernel exposes a new register
through ptrace. This patch adds the required code to support it.
include/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* elf/common.h (NT_ARM_TAGGED_ADDR_CTRL): Define.
gdb/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* aarch64-linux-nat.c (fetch_mteregs_from_thread): New function.
(store_mteregs_to_thread): New function.
(aarch64_linux_nat_target::fetch_registers): Update to call
fetch_mteregs_from_thread.
(aarch64_linux_nat_target::store_registers): Update to call
store_mteregs_to_thread.
* aarch64-tdep.c (aarch64_mte_register_names): New struct.
(aarch64_cannot_store_register): Handle MTE registers.
(aarch64_gdbarch_init): Initialize and setup MTE registers.
* aarch64-tdep.h (gdbarch_tdep) <mte_reg_base>: New field.
<has_mte>: New method.
* arch/aarch64-linux.h (AARCH64_LINUX_SIZEOF_MTE): Define.
gdbserver/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* linux-aarch64-low.cc (aarch64_fill_mteregset): New function.
(aarch64_store_mteregset): New function.
(aarch64_regsets): Add MTE register set entry.
(aarch64_sve_regsets): Add MTE register set entry.
|
|
This patch adds a target description and feature "mte" for aarch64.
It includes one new register, tag_ctl, that can be used to configure the
tag generation rules and sync/async modes. It is 64-bit in size.
The patch also adjusts the code that creates the target descriptions at
runtime based on CPU feature checks.
gdb/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::read_description): Take MTE flag into
account.
Slight refactor to hwcap flag checking.
* aarch64-linux-tdep.c
(aarch64_linux_core_read_description): Likewise.
* aarch64-tdep.c (tdesc_aarch64_list): Add one more dimension for
MTE.
(aarch64_read_description): Add mte_p parameter and update to use it.
Update the documentation.
(aarch64_gdbarch_init): Update call to aarch64_read_description.
* aarch64-tdep.h (aarch64_read_description): Add mte_p parameter.
* arch/aarch64.c: Include ../features/aarch64-mte.c.
(aarch64_create_target_description): Add mte_p parameter and update
the code to use it.
* arch/aarch64.h (aarch64_create_target_description): Add mte_p
parameter.
* features/Makefile (FEATURE_XMLFILES): Add aarch64-mte.xml.
* features/aarch64-mte.c: New file, generated.
* features/aarch64-mte.xml: New file.
gdbserver/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* linux-aarch64-ipa.cc (get_ipa_tdesc): Update call to
aarch64_linux_read_description.
(initialize_low_tracepoint): Likewise.
* linux-aarch64-low.cc (aarch64_target::low_arch_setup): Take MTE flag
into account.
* linux-aarch64-tdesc.cc (tdesc_aarch64_list): Add one more dimension
for MTE.
(aarch64_linux_read_description): Add mte_p parameter and update to
use it.
* linux-aarch64-tdesc.h (aarch64_linux_read_description): Add mte_p
parameter.
|
|
This patch is a preparation for the next patches implementing MTE. It just adds
a HWCAP2 constant for MTE, creates a new generic arch/aarch64-mte-linux.h file
and includes that file in the source files that will use it.
gdb/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* Makefile.in (HFILES_NO_SRCDIR): Add arch/aarch64-mte-linux.h.
* aarch64-linux-nat.c: Include arch/aarch64-mte-linux.h.
* aarch64-linux-tdep.c: Likewise
* arch/aarch64-mte-linux.h: New file.
gdbserver/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* linux-aarch64-low.cc: Include arch/aarch64-mte-linux.h.
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
When inserting hw watchpoints, we take care of masking off the top byte
of the address (and sign-extending it if needed). This guarantees we won't
pass tagged addresses to the kernel via ptrace.
However, from the kernel documentation on tagged pointers...
"Non-zero tags are not preserved when delivering signals. This means that
signal handlers in applications making use of tags cannot rely on the tag
information for user virtual addresses being maintained for fields inside
siginfo_t.
One exception to this rule is for signals raised in response to watchpoint
debug exceptions, where the tag information will be preserved."
So the stopped data address after a hw watchpoint hit can be potentially
tagged, and we don't handle this in GDB at the moment. This results in
GDB missing a hw watchpoint hit and attempting to step over an unsteppable
hw watchpoint, causing it to spin endlessly.
The following patch fixes this by adjusting the stopped data address and adds
some tests to expose the problem.
gdb/ChangeLog:
2020-12-16 Luis Machado <luis.machado@linaro.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::stopped_data_address): Handle the TBI.
gdbserver/ChangeLog:
2020-12-16 Luis Machado <luis.machado@linaro.org>
* linux-aarch64-low.cc (address_significant): New function.
(aarch64_target::low_stopped_data_address): Handle the TBI.
gdb/testsuite/ChangeLog:
2020-12-16 Luis Machado <luis.machado@linaro.org>
* gdb.arch/aarch64-tagged-pointer.c (main): Add a few more
pointer-based memory accesses.
* gdb.arch/aarch64-tagged-pointer.exp: Exercise additional
hw watchpoint cases.
|
|
All the linux target ops have been moved into linux_process_target
as methods. The 'linux_target_ops' struct and its instantiations
are now obsolete. Delete them.
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* linux-low.h (struct linux_target_ops): Remove.
(the_low_target): Remove.
* linux-x86-low.cc (the_low_target): Remove.
* linux-aarch64-low.cc (the_low_target): Ditto.
* linux-arm-low.cc (the_low_target): Ditto.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-cris-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-ia64-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-mips-low.cc (the_low_target): Ditto.
* linux-nios2-low.cc (the_low_target): Ditto.
* linux-ppc-low.cc (the_low_target): Ditto.
* linux-riscv-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-sparc-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'get_syscall_trapinfo' linux target op into a method
of process_stratum_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <get_syscall_trapinfo>
<gdb_catch_this_syscall>
<low_supports_catch_syscall>
<low_get_syscall_trapinfo>: Declare.
* linux-low.cc (get_syscall_trapinfo): Turn into...
(linux_process_target::get_syscall_trapinfo): ...this.
(linux_process_target::low_get_syscall_trapinfo): Define.
(gdb_catch_this_syscall_p): Turn into...
(linux_process_target::gdb_catch_this_syscall): ...this.
(linux_process_target::low_supports_catch_syscall): Define.
Update the callers below.
(linux_process_target::wait_1)
(linux_process_target::supports_catch_syscall)
* linux-x86-low.cc (class x86_target) <low_supports_catch_syscall>
<low_get_syscall_trapinfo>: Declare.
(x86_target::low_supports_catch_syscall): Define.
(x86_get_syscall_trapinfo): Turn into...
(x86_target::low_get_syscall_trapinfo): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target)
<low_supports_catch_syscall>
<low_get_syscall_trapinfo>: Declare.
(aarch64_target::low_supports_catch_syscall): Define.
(aarch64_get_syscall_trapinfo): Turn into...
(aarch64_target::low_get_syscall_trapinfo): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (class arm_target) <low_supports_catch_syscall>
<low_get_syscall_trapinfo>: Declare.
(arm_target::low_supports_catch_syscall): Define.
(arm_get_syscall_trapinfo): Turn into...
(arm_target::low_get_syscall_trapinfo): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (the_low_target): Remove the op field.
* linux-s390-low.cc (the_low_target): Remove the op field.
|
|
All the linux low targets except arm define the
'supports_hardware_single_step' op to return true. Hence, we override
the method to return true in linux_process_target, and remove the
definitions in all the linux low targets but arm.
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'supports_hardware_single_step' linux target op and
override the process_stratum_target's op definition in
linux_process_target to return true.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <finish_step_over>
<maybe_hw_step>: Declare.
* linux-low.cc (can_hardware_single_step): Remove.
(maybe_hw_step): Turn into...
(linux_process_target::maybe_hw_step): ...this.
(finish_step_over): Turn into...
(linux_process_target::finish_step_over): ...this.
(linux_process_target::supports_hardware_single_step): Update
to return true.
Update the callers below.
(linux_process_target::single_step)
(linux_process_target::resume_one_lwp_throw)
* linux-arm-low.cc (class arm_target)
<supports_hardware_single_step>: Declare.
(arm_supports_hardware_single_step): Turn into...
(arm_target::supports_hardware_single_step): ...this.
(the_low_target): Remove the op field.
* linux-x86-low.cc (x86_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (aarch64_supports_hardware_single_step):
Remove.
(the_low_target): Remove the op field.
* linux-bfin-low.cc (bfin_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-crisv32-low.cc (cris_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-m32r-low.cc (m32r_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-m68k-low.cc (m68k_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (ppc_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-s390-low.cc (s390_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-sh-low.cc (sh_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-tic6x-low.cc (tic6x_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-tile-low.cc (tile_supports_hardware_single_step): Remove.
(the_low_target): Remove the op field.
* linux-xtensa-low.cc (xtensa_supports_hardware_single_step):
Remove.
(the_low_target): Remove the op field.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'supports_range_stepping' linux target op into a method
of linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <low_supports_range_stepping>: Declare.
* linux-low.cc (linux_process_target::low_supports_range_stepping):
Define.
(linux_process_target::supports_range_stepping): Update the call
site.
* linux-x86-low.cc (class x86_target)
<low_supports_range_stepping>: Declare.
(x86_supports_range_stepping): Turn into...
(x86_target::low_supports_range_stepping): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target)
<low_supports_range_stepping>: Declare.
(aarch64_supports_range_stepping): Turn into...
(aarch64_target::low_supports_range_stepping): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (the_low_target): Remove the op field.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-ppc-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'emit_ops' linux target ops and let the concrete
linux target define the op by overriding the declaration of
process_stratum_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <emit_ops>: Remove.
* linux-low.cc (linux_process_target::emit_ops): Remove.
* linux-x86-low.cc (class x86_target) <emit_ops>: Declare.
(x86_emit_ops): Turn into...
(x86_target::emit_ops): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target) <emit_ops>: Declare.
(aarch64_emit_ops): Turn into...
(aarch64_target::emit_ops): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target) <emit_ops>: Declare.
(ppc_emit_ops): Turn into...
(ppc_target::emit_ops): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target) <emit_ops>: Declare.
(s390_emit_ops): Turn into...
(s390_target::emit_ops): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (the_low_target): Remove the op field.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'install_fast_tracepoint_jump_pad' and
'get_min_fast_tracepoint_insn_len' linux target ops to let the
concrete linux target define the ops by overriding the declarations
of process_stratum_target.
* linux-low.h (struct linux_target_ops): Remove the ops.
(class linux_process_target) <supports_fast_tracepoints>
<install_fast_tracepoint_jump_pad>
<get_min_fast_tracepoint_insn_len>: Remove.
* linux-low.cc (linux_process_target::supports_fast_tracepoints)
(linux_process_target::install_fast_tracepoint_jump_pad)
(linux_process_target::get_min_fast_tracepoint_insn_len): Remove.
* linux-x86-low.cc (class x86_target) <supports_fast_tracepoints>
<install_fast_tracepoint_jump_pad>
<get_min_fast_tracepoint_insn_len>: Declare.
(x86_target::supports_fast_tracepoints): Define.
(x86_install_fast_tracepoint_jump_pad): Turn into...
(x86_target::install_fast_tracepoint_jump_pad): ...this.
(x86_get_min_fast_tracepoint_insn_len): Turn into...
(x86_target::get_min_fast_tracepoint_insn_len): ...this.
(the_low_target): Remove the op fields.
* linux-aarch64-low.cc (class aarch64_target)
<supports_fast_tracepoints>
<install_fast_tracepoint_jump_pad>
<get_min_fast_tracepoint_insn_len>: Declare.
(aarch64_target::supports_fast_tracepoints): Define.
(aarch64_install_fast_tracepoint_jump_pad): Turn into...
(aarch64_target::install_fast_tracepoint_jump_pad): ...this.
(aarch64_get_min_fast_tracepoint_insn_len): Turn into...
(aarch64_target::get_min_fast_tracepoint_insn_len): ...this.
(the_low_target): Remove the op fields.
* linux-ppc-low.cc (class ppc_target) <supports_fast_tracepoints>
<install_fast_tracepoint_jump_pad>
<get_min_fast_tracepoint_insn_len>: Declare.
(ppc_target::supports_fast_tracepoints): Define.
(ppc_install_fast_tracepoint_jump_pad): Turn into...
(ppc_target::install_fast_tracepoint_jump_pad): ...this.
(ppc_get_min_fast_tracepoint_insn_len): Turn into...
(ppc_target::get_min_fast_tracepoint_insn_len): ...this.
(the_low_target): Remove the op fields.
* linux-s390-low.cc (class s390_target) <supports_fast_tracepoints>
<install_fast_tracepoint_jump_pad>
<get_min_fast_tracepoint_insn_len>: Declare.
(s390_target::supports_fast_tracepoints): Define.
(s390_install_fast_tracepoint_jump_pad): Turn into...
(s390_target::install_fast_tracepoint_jump_pad): ...this.
(s390_get_min_fast_tracepoint_insn_len): Turn into...
(s390_target::get_min_fast_tracepoint_insn_len): ...this.
(the_low_target): Remove the op fields.
* linux-arm-low.cc (the_low_target): Remove the op fields.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'get_thread_area' linux target op into a method of
process_stratum_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <stuck_in_jump_pad>
<linux_fast_tracepoint_collecting>
<low_get_thread_area>: Declare.
* linux-low.cc (supports_fast_tracepoints): Remove.
(linux_fast_tracepoint_collecting): Turn into...
(linux_process_target::linux_fast_tracepoint_collecting): ...this.
(linux_process_target::low_get_thread_area): Define.
(stuck_in_jump_pad_callback): Turn into...
(linux_process_target::stuck_in_jump_pad): ...this.
Update the caller below.
(linux_process_target::stabilize_threads)
* linux-x86-low.cc (class x86_target) <low_get_thread_area>:
Declare.
(x86_get_thread_area): Turn into...
(x86_target::low_get_thread_area): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target) <low_get_thread_area>:
Declare.
(aarch64_get_thread_area): Turn into...
(aarch64_target::low_get_thread_area): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target) <low_get_thread_area>:
Declare.
(ppc_get_thread_area): Turn into...
(ppc_target::low_get_thread_area): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target) <low_get_thread_area>:
Declare.
(s390_get_thread_area): Turn into...
(s390_target::low_get_thread_area): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (the_low_target): Remove the op field.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remote the 'supports_tracepoints' linux target op and let the
concrete linux target define it by overriding the op declared in
process_stratum_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <supports_tracepoints>: Remove.
* linux-low.cc (linux_process_target::supports_tracepoints): Remove.
* linux-x86-low.cc (class x86_target) <supports_tracepoints>:
Declare.
(x86_supports_tracepoints): Turn into...
(x86_target::supports_tracepoints): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target)
<supports_tracepoints>: Declare.
(aarch64_supports_tracepoints): Turn into...
(aarch64_target::supports_tracepoints): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target) <supports_tracepoints>:
Declare.
(ppc_supports_tracepoints): Turn into...
(ppc_target::supports_tracepoints): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target) <supports_tracepoints>:
Declare.
(s390_supports_tracepoints): Turn into...
(s390_target::supports_tracepoints): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (the_low_target): Remove the op field.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'process_qsupported' linux target op and let a concrete
linux target define the op by overriding the op declaration in
process_stratum_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <process_qsupported>: Remove.
* linux-low.cc (linux_process_target::process_qsupported): Remove.
* linux-x86-low.cc (class x86_target) <process_qsupported>: Declare.
(x86_linux_process_qsupported): Turn into...
(x86_target::process_qsupported): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (the_low_target): Remove the op
field.
* linux-arm-low.cc (the_low_target): Ditto.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-ppc-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'prepare_to_resume' linux target op into a method of
linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <low_prepare_to_resume>: Declare.
* linux-low.cc (linux_process_target::low_prepare_to_resume):
Define.
Update the callers below:
(linux_process_target::resume_one_lwp_throw)
(linux_process_target::low_prepare_to_resume)
* linux-x86-low.cc (class x86_target) <low_prepare_to_resume>:
Declare.
(x86_target::low_prepare_to_resume): Define.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target)
<low_prepare_to_resume>: Declare.
(aarch64_target::low_prepare_to_resume): Define.
(the_low_target): Remove the op field.
* linux-arm-low.cc (class arm_target) <low_prepare_to_resume>:
Declare.
(arm_prepare_to_resume): Turn into...
(arm_target::low_prepare_to_resume): ...this.
(the_low_target): Remove the op field.
* linux-mips-low.cc (class mips_target) <low_prepare_to_resume>:
Declare.
(mips_linux_prepare_to_resume): Turn into...
(mips_target::low_prepare_to_resume): ...this.
(the_low_target): Remove the op field.
* linux-bfin-low.cc (the_low_target): Remove the op field.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-ppc-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'new_process', 'delete_process', 'new_thread',
'delete_thread', and 'new_fork' linux target ops into methods
of linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the ops.
(class linux_process_target) <add_linux_process>
<add_lwp>
<delete_lwp>
<attach_lwp>
<detach_one_lwp>
<check_zombie_leaders>
<filter_exit_event>
<low_new_process>
<low_delete_process>
<low_new_thread>
<low_delete_thread>
<low_new_fork>: Declare.
* linux-low.cc (delete_lwp): Turn into...
(linux_process_target::delete_lwp): ...this.
(linux_process_target::low_delete_thread): Define.
(linux_add_process): Turn into...
(linux_process_target::add_linux_process): ...this.
(linux_process_target::low_new_process): Define.
(linux_process_target::low_delete_process): Define.
(linux_process_target::low_new_fork): Define.
(add_lwp): Turn into...
(linux_process_target::add_lwp): ...this.
(linux_process_target::low_new_thread): Define.
(linux_attach_lwp): Turn into...
(linux_process_target::attach_lwp): ...this.
(linux_detach_one_lwp): Turn into...
(linux_process_target::detach_one_lwp): ...this.
(linux_detach_lwp_callback): Remove and inline...
(linux_process_target::detach): ...here.
(check_zombie_leaders): Turn into...
(linux_process_target::check_zombie_leaders): ...this.
(filter_exit_event): Turn into...
(linux_process_target::filter_exit_event): ...this.
Update the callers below.
(linux_process_target::handle_extended_wait)
(linux_process_target::create_inferior)
(attach_proc_task_lwp_callback)
(linux_process_target::attach)
(linux_process_target::detach)
(linux_process_target::mourn)
* thread-db.cc (attach_thread)
* linux-x86-low.cc (class x86_target) <low_new_process>
<low_delete_process>
<low_new_thread>
<low_delete_thread>
<low_new_fork>: Declare.
(x86_linux_new_process): Turn into...
(x86_target::low_new_process): ...this.
(x86_linux_delete_process): Turn into...
(x86_target::low_delete_process): ...this.
(x86_target::low_new_thread): Define.
(x86_target::low_delete_thread): Define.
(x86_linux_new_fork): Turn into...
(x86_target::low_new_fork): ...this.
(the_low_target): Remove the op fields.
* linux-aarch64-low.cc (class aarch64_target) <low_new_process>
<low_delete_process>
<low_new_thread>
<low_delete_thread>
<low_new_fork>: Declare.
(aarch64_linux_new_process): Turn into...
(aarch64_target::low_new_process): ...this.
(aarch64_linux_delete_process): Turn into...
(aarch64_target::low_delete_process): ...this.
(aarch64_target::low_new_thread): Define.
(aarch64_target::low_delete_thread): Define.
(aarch64_linux_new_fork): Turn into...
(aarch64_target::low_new_fork): ...this.
(the_low_target): Remove the op fields.
* linux-arm-low.cc (class arm_target) <low_new_process>
<low_delete_process>
<low_new_thread>
<low_delete_thread>
<low_new_fork>: Declare.
(arm_new_process): Turn into...
(arm_target::low_new_process): ...this.
(arm_delete_process): Turn into...
(arm_target::low_delete_process): ...this.
(arm_new_thread): Turn into...
(arm_target::low_new_thread): ...this.
(arm_delete_thread): Turn into...
(arm_target::low_delete_thread): ...this.
(arm_new_fork): Turn into...
(arm_target::low_new_fork): ...this.
(the_low_target): Remove the op fields.
* linux-mips-low.cc (class mips_target) <low_new_process>
<low_delete_process>
<low_new_thread>
<low_delete_thread>
<low_new_fork>: Declare.
(mips_linux_new_process): Turn into...
(mips_target::low_new_process): ...this.
(mips_linux_delete_process): Turn into...
(mips_target::low_delete_process): ...this.
(mips_linux_new_thread): Turn into...
(mips_target::low_new_thread): ...this.
(mips_linux_delete_thread): Turn into...
(mips_target::low_delete_thread): ...this.
(mips_linux_new_fork): Turn into...
(mips_target::low_new_fork): ...this.
(the_low_target): Remove the op fields.
* linux-bfin-low.cc (the_low_target): Remove the op fields.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-ppc-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'siginfo_fixup' linux target op into a method of
linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <siginfo_fixup>
<low_siginfo_fixup>: Declare.
* linux-low.cc (siginfo_fixup): Turn into...
(linux_process_target::siginfo_fixup): ...this.
(linux_process_target::low_siginfo_fixup): Define.
* linux-x86-low.cc (class x86_target) <low_siginfo_fixup>: Declare.
(x86_siginfo_fixup): Turn into...
(x86_target::low_siginfo_fixup): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target):
<low_siginfo_fixup>: Declare.
(aarch64_linux_siginfo_fixup): Turn into...
(aarch64_target::low_siginfo_fixup): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (the_low_target): Remove the op field.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-mips-low.cc (the_low_target): Ditto.
* linux-ppc-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'collect_ptrace_register' and 'supply_ptrace_register'
linux target ops into methods of linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the ops.
(class linux_process_target) <low_collect_ptrace_register>
<low_store_ptrace_register>: Declare.
* linux-low.cc (linux_process_target::low_collect_ptrace_register)
(linux_process_target::low_supply_ptrace_register): Define.
Update the callers below.
(linux_process_target::fetch_register)
(linux_process_target::store_register)
* linux-x86-low.cc (the_low_target): Remove the op fields.
* linux-aarch64-low.cc (the_low_target): Ditto.
* linux-arm-low.cc (the_low_target): Ditto.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-sparc-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
* linux-mips-low.cc (class mips_target)
<low_collect_ptrace_register>
<low_supply_ptrace_register>: Declare.
(mips_collect_ptrace_register): Turn into ...
(mips_target::low_collect_ptrace_register): ...this.
(mips_supply_ptrace_register): Turn into...
(mips_target::low_supply_ptrace_register): ...this.
(the_low_target): Remove the op fields.
* linux-ppc-low.cc (class ppc_target)
<low_collect_ptrace_register>
<low_supply_ptrace_register>: Declare.
(ppc_collect_ptrace_register): Turn into ...
(ppc_target::low_collect_ptrace_register): ...this.
(ppc_supply_ptrace_register): Turn into ...
(ppc_target::low_supply_ptrace_register): ...this.
(ppc_fill_gregset): Update for the calls to
low_collect_ptrace_register.
(the_low_target): Remove the op fields.
* linux-s390-low.cc (class s390_target)
<low_collect_ptrace_register>
<low_supply_ptrace_register>: Declare.
(s390_collect_ptrace_register): Turn into ...
(s390_target::low_collect_ptrace_register): ...this.
(s390_supply_ptrace_register): Turn into ...
(s390_target::low_supply_ptrace_register): ...this.
(s390_fill_gregset): Update for the calls to
low_collect_ptrace_register.
(the_low_target): Remove the op fields.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'stopped_by_watchpoint' and 'stopped_data_address' linux
target ops into methods of linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the ops.
(class linux_process_target) <check_stopped_by_watchpoint>
<low_stopped_by_watchpoint>
<low_stopped_data_address>: Declare.
* linux-low.cc (check_stopped_by_watchpoint): Turn into...
(linux_process_target::check_stopped_by_watchpoint): ...this.
(linux_process_target::low_stopped_by_watchpoint): Define.
(linux_process_target::low_stopped_data_address): Define.
* linux-x86-low.cc (class x86_target) <low_stopped_by_watchpoint>
<low_stopped_data_address>: Declare.
(x86_stopped_by_watchpoint): Turn into...
(x86_target::low_stopped_by_watchpoint): ...this.
(x86_stopped_data_address): Turn into...
(x86_target::low_stopped_data_address): ...this.
(the_low_target): Remove the op fields.
* linux-aarch64-low.cc (class aarch64_target)
<low_stopped_by_watchpoint>
<low_stopped_data_address>: Declare.
(aarch64_stopped_by_watchpoint): Turn into...
(aarch64_target::low_stopped_by_watchpoint): ...this.
(aarch64_stopped_data_address): Turn into...
(aarch64_target::low_stopped_data_address): ...this.
(the_low_target): Remove the op fields.
* linux-arm-low.cc (class arm_target) <low_stopped_by_watchpoint>
<low_stopped_data_address>: Declare.
(arm_stopped_by_watchpoint): Turn into...
(arm_target::low_stopped_by_watchpoint): ...this.
(arm_stopped_data_address): Turn into...
(arm_target::low_stopped_data_address): ...this.
(the_low_target): Remove the op fields.
* linux-crisv32-low.cc (class crisv32_target)
<low_stopped_by_watchpoint>
<low_stopped_data_address>: Declare.
(cris_stopped_by_watchpoint): Turn into...
(crisv32_target::low_stopped_by_watchpoint): ...this.
(cris_stopped_data_address): Turn into...
(crisv32_target::low_stopped_data_address): ...this.
(the_low_target): Remove the op fields.
* linux-mips-low.cc (class mips_target) <low_stopped_by_watchpoint>
<low_stopped_data_address>: Declare.
(mips_stopped_by_watchpoint): Turn into...
(mips_target::low_stopped_by_watchpoint): ...this.
(mips_stopped_data_address): Turn into...
(mips_target::low_stopped_data_address): ...this.
(the_low_target): Remove the op fields.
* linux-bfin-low.cc (the_low_target): Remove the op fields.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-ppc-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-sparc-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'insert_point' and 'remove_point' linux target ops into
methods of linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the ops.
(class linux_process_target) <low_insert_point>
<low_remove_point>: Declare.
* linux-low.cc (linux_process_target::low_insert_point)
(linux_process_target::low_remove_point): Define.
(linux_process_target::insert_point)
(linux_process_target::remove_point): Update for calls to
low_insert_point and low_remove_point.
* linux-x86-low.cc (class x86_target) <low_insert_point>
<low_remove_point>: Declare.
(x86_insert_point): Turn into...
(x86_target::low_insert_point): ...this.
(x86_remove_point): Turn into...
(x86_target::low_remove_point): ...this.
(the_low_target): Remove the op fields.
* linux-aarch64-low.cc (class aarch64_target) <low_insert_point>
<low_remove_point>: Declare.
(aarch64_insert_point): Turn into...
(aarch64_target::low_insert_point): ...this.
(aarch64_remove_point): Turn into...
(aarch64_target::low_remove_point): ...this.
(the_low_target): Remove the op fields.
* linux-arm-low.cc (class arm_target) <low_insert_point>
<low_remove_point>: Declare.
(arm_insert_point): Turn into...
(arm_target::low_insert_point): ...this.
(arm_remove_point): Turn into...
(arm_target::low_remove_point): ...this.
(the_low_target): Remove the op fields.
* linux-crisv32-low.cc (class crisv32_target) <low_insert_point>
<low_remove_point>: Declare.
(crisv32_insert_point): Turn into...
(crisv32_target::low_insert_point): ...this.
(crisv32_remove_point): Turn into...
(crisv32_target::low_remove_point): ...this.
(the_low_target): Remove the op fields.
* linux-mips-low.cc (class mips_target) <low_insert_point>
<low_remove_point>: Declare.
(mips_insert_point): Turn into...
(mips_target::low_insert_point): ...this.
(mips_remove_point): Turn into...
(mips_target::low_remove_point): ...this.
(the_low_target): Remove the op fields.
* linux-ppc-low.cc (class ppc_target) <low_insert_point>
<low_remove_point>: Declare.
(ppc_insert_point): Turn into...
(ppc_target::low_insert_point): ...this.
(ppc_remove_point): Turn into...
(ppc_target::low_remove_point): ...this.
(the_low_target): Remove the op fields.
* linux-bfin-low.cc (the_low_target): Remove the op fields.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-sparc-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'supports_z_point_type' linux target op and let the
concrete linux target define it by overriding the op declared in
process_stratum_target.
* linux-low.cc (linux_process_target::supports_z_point_type):
Remove.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <supports_z_point_type>: Remove.
* linux-x86-low.cc (class x86_target) <supports_z_point_type>:
Declare.
(x86_supports_z_point_type): Turn into...
(x86_target::supports_z_point_type): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target)
<supports_z_point_type>: Declare.
(aarch64_supports_z_point_type): Turn into...
(aarch64_target::supports_z_point_type): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (class arm_target) <supports_z_point_type>:
Declare.
(arm_supports_z_point_type): Turn into...
(arm_target::supports_z_point_type): ...this.
(the_low_target): Remove the op field.
* linux-crisv32-low.cc (class crisv32_target)
<supports_z_point_type>: Declare.
(cris_supports_z_point_type): Turn into...
(crisv32_target::supports_z_point_type): ...this.
(the_low_target): Remove the op field.
* linux-mips-low.cc (class mips_target) <supports_z_point_type>:
Declare.
(mips_supports_z_point_type): Turn into...
(mips_target::supports_z_point_type): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target) <supports_z_point_type>:
Declare.
(ppc_supports_z_point_type): Turn into...
(ppc_target::supports_z_point_type): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target) <supports_z_point_type>:
Declare.
(s390_supports_z_point_type): Turn into...
(s390_target::supports_z_point_type): ...this.
(the_low_target): Remove the op field.
* linux-bfin-low.cc (the_low_target): Remove the op field.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-sparc-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'breakpoint_at' linux target op into a method of
linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <low_breakpoint_at>: Declare.
Update the callers below:
* linux-low.cc (linux_process_target::save_stop_reason)
(linux_process_target::thread_still_has_status_pending)
(linux_process_target::wait_1)
* linux-x86-low.cc (class x86_target)
<low_breakpoint_at>: Declare.
(x86_breakpoint_at): Turn into...
(x86_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target)
<low_breakpoint_at>: Declare.
(aarch64_breakpoint_at): Turn into...
(aarch64_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (class arm_target)
<low_breakpoint_at>: Declare.
(arm_target::low_breakpoint_at): Define.
(the_low_target): Remove the op field.
* linux-bfin-low.cc (class bfin_target)
<low_breakpoint_at>: Declare.
(bfin_breakpoint_at): Turn into...
(bfin_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-cris-low.cc (class cris_target)
<low_breakpoint_at>: Declare.
(cris_breakpoint_at): Turn into...
(cris_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-crisv32-low.cc (class crisv32_target)
<low_breakpoint_at>: Declare.
(crisv32_breakpoint_at): Turn into...
(crisv32_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-ia64-low.cc (class ia64_target)
<low_breakpoint_at>: Declare.
(ia64_target::low_breakpoint_at): Define.
* linux-m32r-low.cc (class m32r_target)
<low_breakpoint_at>: Declare.
(m32r_breakpoint_at): Turn into...
(m32r_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-m68k-low.cc (class m68k_target)
<low_breakpoint_at>: Declare.
(m68k_breakpoint_at): Turn into...
(m68k_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-mips-low.cc (class mips_target)
<low_breakpoint_at>: Declare.
(mips_breakpoint_at): Turn into...
(mips_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-nios2-low.cc (class nios2_target)
<low_breakpoint_at>: Declare.
(nios2_breakpoint_at): Turn into...
(nios2_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target)
<low_breakpoint_at>: Declare.
(ppc_breakpoint_at): Turn into...
(ppc_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-riscv-low.cc (class riscv_target)
<low_breakpoint_at>: Declare.
(riscv_breakpoint_at): Turn into...
(riscv_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target)
<low_breakpoint_at>: Declare.
(s390_breakpoint_at): Turn into...
(s390_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-sh-low.cc (class sh_target)
<low_breakpoint_at>: Declare.
(sh_breakpoint_at): Turn into...
(sh_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-sparc-low.cc (class sparc_target)
<low_breakpoint_at>: Declare.
(sparc_breakpoint_at): Turn into...
(sparc_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-tic6x-low.cc (class tic6x_target)
<low_breakpoint_at>: Declare.
(tic6x_breakpoint_at): Turn into...
(tic6x_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-tile-low.cc (class tile_target)
<low_breakpoint_at>: Declare.
(tile_breakpoint_at): Turn into...
(tile_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
* linux-xtensa-low.cc (class xtensa_target)
<low_breakpoint_at>: Declare.
(xtensa_breakpoint_at): Turn into...
(xtensa_target::low_breakpoint_at): ...this.
(the_low_target): Remove the op field.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'decr_pc_after_break' linux_target_ops field into
a method of linux_process_target.
* linux-low.h (struct linux_target_ops)
<decr_pc_after_break>: Remove.
(class linux_process_target) <low_decr_pc_after_break>: New method
declaration.
* linux-low.cc (linux_process_target::low_decr_pc_after_break):
New method implementation.
Update the users below.
(linux_process_target::save_stop_reason)
(linux_process_target::wait_1)
* linux-x86-low.cc (class x86_target) <low_decr_pc_after_break>:
New declaration.
(x86_target::low_decr_pc_after_break): New method implementation.
(the_low_target): Remove the field.
* linux-bfin-low.cc (class bfin_target) <low_decr_pc_after_break>:
New declaration.
(bfin_target::low_decr_pc_after_break): New method implementation.
(the_low_target): Remove the field.
* linux-m68k-low.cc (class m68k_target) <low_decr_pc_after_break>:
New declaration.
(m68k_target::low_decr_pc_after_break): New method implementation.
(the_low_target): Remove the field.
* linux-s390-low.cc (class s390_target) <low_decr_pc_after_break>:
New declaration.
(s390_target::low_decr_pc_after_break): New method implementation.
(the_low_target): Remove the field.
* linux-aarch64-low.cc (the_low_target): Remove the field.
* linux-arm-low.cc (the_low_target): Remove the field.
* linux-cris-low.cc (the_low_target): Remove the field.
* linux-crisv32-low.cc (the_low_target): Remove the field.
* linux-m32r-low.cc (the_low_target): Remove the field.
* linux-mips-low.cc (the_low_target): Remove the field.
* linux-nios2-low.cc (the_low_target): Remove the field.
* linux-ppc-low.cc (the_low_target): Remove the field.
* linux-riscv-low.cc (the_low_target): Remove the field.
* linux-sh-low.cc (the_low_target): Remove the field.
* linux-sparc-low.cc (the_low_target): Remove the field.
* linux-tic6x-low.cc (the_low_target): Remove the field.
* linux-tile-low.cc (the_low_target): Remove the field.
* linux-xtensa-low.cc (the_low_target): Remove the field.
|
|
into methods
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'supports_software_single_step' linux target op and let
the concrete linux target define it by overriding the op in
process_stratum_target.
Turn the 'get_next_pcs' linux target op into a method of
linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the ops.
(class linux_process_target) <supports_software_single_step>:
Remove.
<low_get_next_pcs>: Declare.
* linux-low.cc (can_software_single_step): Remove.
(linux_process_target::low_get_next_pcs): Define.
(linux_process_target::supports_software_single_step): Remove.
Update the callers below.
(linux_process_target::handle_extended_wait)
(linux_process_target::wait_1)
(linux_process_target::install_software_single_step_breakpoints)
(linux_process_target::single_step)
(linux_process_target::thread_needs_step_over)
(linux_process_target::proceed_one_lwp)
(linux_process_target::supports_range_stepping)
* linux-x86-low.cc (the_low_target): Remove the op field.
* linux-aarch64-low.cc (the_low_target): Ditto.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-cris-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-mips-low.cc (the_low_target): Ditto.
* linux-nios2-low.cc (the_low_target): Ditto.
* linux-ppc-low.cc (the_low_target): Ditto.
* linux-riscv-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-sparc-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
* linux-arm-low.cc (class arm_target) <low_get_next_pcs>
<supports_software_single_step>: Declare.
(arm_target::supports_software_single_step): Define.
(arm_gdbserver_get_next_pcs): Turn into...
(arm_target::low_get_next_pcs): ...this.
(the_low_target): Remove the op field.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'sw_breakpoint_from_kind' linux target op, and let
the concrete linux target define it by overriding the op
in process_stratum_target.
* linux-low.cc (linux_process_target::sw_breakpoint_from_kind):
Remove.
* linux-low.h (struct linux_target_ops): Remove the op.
(class linux_process_target) <sw_breakpoint_from_kind>: Remove.
* linux-x86-low.cc (class x86_target) <sw_breakpoint_from_kind>:
Declare.
(x86_sw_breakpoint_from_kind): Turn into...
(x86_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target)
<sw_breakpoint_from_kind>: Declare.
(aarch64_sw_breakpoint_from_kind): Turn into...
(aarch64_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (class arm_target) <sw_breakpoint_from_kind>:
Declare.
(arm_target::sw_breakpoint_from_kind): Define.
(the_low_target): Remove the op field.
* linux-bfin-low.cc (class bfin_target) <sw_breakpoint_from_kind>:
Declare.
(bfin_sw_breakpoint_from_kind): Turn into...
(bfin_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-cris-low.cc (class cris_target) <sw_breakpoint_from_kind>:
Declare.
(cris_sw_breakpoint_from_kind): Turn into...
(cris_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-crisv32-low.cc (class crisv32_target)
<sw_breakpoint_from_kind>: Declare.
(cris_sw_breakpoint_from_kind): Turn into...
(crisv32_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-ia64-low.cc (class ia64_target) <sw_breakpoint_from_kind>:
Declare.
(ia64_target::sw_breakpoint_from_kind): Define.
* linux-m32r-low.cc (class m32r_target) <sw_breakpoint_from_kind>:
Declare.
(m32r_sw_breakpoint_from_kind): Turn into...
(m32r_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-m68k-low.cc (class m68k_target) <sw_breakpoint_from_kind>:
Declare.
(m68k_sw_breakpoint_from_kind): Turn into...
(m68k_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-mips-low.cc (class mips_target) <sw_breakpoint_from_kind>:
Declare.
(mips_sw_breakpoint_from_kind): Turn into...
(mips_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-nios2-low.cc (class nios2_target) <sw_breakpoint_from_kind>:
Declare.
(nios2_sw_breakpoint_from_kind): Turn into...
(nios2_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target) <sw_breakpoint_from_kind>:
Declare.
(ppc_sw_breakpoint_from_kind): Turn into...
(ppc_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-riscv-low.cc (class riscv_target) <sw_breakpoint_from_kind>:
Declare.
(riscv_sw_breakpoint_from_kind): Turn into...
(riscv_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target) <sw_breakpoint_from_kind>:
Declare.
(s390_sw_breakpoint_from_kind): Turn into...
(s390_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-sh-low.cc (class sh_target) <sw_breakpoint_from_kind>:
Declare.
(sh_sw_breakpoint_from_kind): Turn into...
(sh_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-sparc-low.cc (class sparc_target) <sw_breakpoint_from_kind>:
Declare.
(sparc_sw_breakpoint_from_kind): Turn into...
(sparc_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-tic6x-low.cc (class tic6x_target) <sw_breakpoint_from_kind>:
Declare.
(tic6x_sw_breakpoint_from_kind): Turn into...
(tic6x_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-tile-low.cc (class tile_target) <sw_breakpoint_from_kind>:
Declare.
(tile_sw_breakpoint_from_kind): Turn into...
(tile_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
* linux-xtensa-low.cc (class xtensa_target)
<sw_breakpoint_from_kind>: Declare.
(xtensa_sw_breakpoint_from_kind): Turn into...
(xtensa_target::sw_breakpoint_from_kind): ...this.
(the_low_target): Remove the op field.
|
|
methods
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Remove the 'breakpoint_kind_from_pc' and
'breakpoint_kind_from_current_state' linux target ops, and let the
concrete linux target define them by overriding the ops of
process_stratum_target.
* linux-low.cc (linux_process_target::breakpoint_kind_from_pc):
Remove.
(linux_process_target::breakpoint_kind_from_current_state): Remove.
* linux-low.h (struct linux_target_ops): Remove ops.
(class linux_process_target) <breakpoint_kind_from_pc>: Remove.
<breakpoint_kind_from_current_state>: Remove.
* linux-x86-low.cc (the_low_target): Remove the op fields.
* linux-bfin-low.cc (the_low_target): Ditto.
* linux-cris-low.cc (the_low_target): Ditto.
* linux-crisv32-low.cc (the_low_target): Ditto.
* linux-m32r-low.cc (the_low_target): Ditto.
* linux-m68k-low.cc (the_low_target): Ditto.
* linux-mips-low.cc (the_low_target): Ditto.
* linux-nios2-low.cc (the_low_target): Ditto.
* linux-ppc-low.cc (the_low_target): Ditto.
* linux-s390-low.cc (the_low_target): Ditto.
* linux-sh-low.cc (the_low_target): Ditto.
* linux-sparc-low.cc (the_low_target): Ditto.
* linux-tic6x-low.cc (the_low_target): Ditto.
* linux-tile-low.cc (the_low_target): Ditto.
* linux-xtensa-low.cc (the_low_target): Ditto.
* linux-aarch64-low.cc (class aarch64_target)
<breakpoint_kind_from_pc>
<breakpoint_kind_from_current_state>: Declare.
(aarch64_breakpoint_kind_from_pc): Turn into...
(aarch64_target::breakpoint_kind_from_pc): ...this.
(aarch64_breakpoint_kind_from_current_state): Turn into...
(aarch64_target::breakpoint_kind_from_current_state): ...this.
(the_low_target): Remove the op fields.
* linux-arm-low.cc (class arm_target):
<breakpoint_kind_from_pc>
<breakpoint_kind_from_current_state>: Declare.
(arm_target::breakpoint_kind_from_pc): Define.
(arm_target::breakpoint_kind_from_current_state): Define.
(the_low_target): Remove the op fields.
* linux-riscv-low.cc (class riscv_target):
<breakpoint_kind_from_pc>: Declare.
(riscv_breakpoint_kind_from_pc): Turn into...
(riscv_target::breakpoint_kind_from_pc): ...this.
(the_low_target): Remove the op fields.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'get_pc' and 'set_pc' linux target ops into methods
of linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the ops.
(class linux_process_target) <low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
* linux-low.cc (supports_breakpoints): Turn into...
(linux_process_target::low_supports_breakpoints): ...this.
(linux_process_target::low_get_pc): Define.
(linux_process_target::low_set_pc): Define.
Update the callers below.
(linux_process_target::get_pc)
(linux_process_target::save_stop_reason)
(linux_process_target::maybe_move_out_of_jump_pad)
(linux_process_target::wait_1)
(linux_process_target::resume_one_lwp_throw)
(linux_process_target::resume)
(linux_process_target::proceed_all_lwps)
(linux_process_target::read_pc)
(linux_process_target::write_pc)
* linux-x86-low.cc (class linux_process_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(x86_target::low_supports_breakpoints): Define.
(x86_get_pc): Turn into...
(x86_target::low_get_pc): ...this.
(x86_set_pc): Turn into...
(x86_target::low_set_pc): ...this.
(the_low_target): Remove the op fields.
* linux-arm-low.cc (class arm_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(arm_target::low_supports_breakpoints)
(arm_target::low_get_pc)
(arm_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-bfin-low.cc (class bfin_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(bfin_target::low_supports_breakpoints)
(bfin_target::low_get_pc)
(bfin_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-cris-low.cc (class cris_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(cris_target::low_supports_breakpoints)
(cris_target::low_get_pc)
(cris_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-crisv32-low.cc (class crisv32_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(crisv32_target::low_supports_breakpoints)
(crisv32_target::low_get_pc)
(crisv32_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-m32r-low.cc (class m32r_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(m32r_target::low_supports_breakpoints)
(m32r_target::low_get_pc)
(m32r_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-m68k-low.cc (class m68k_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(m68k_target::low_supports_breakpoints)
(m68k_target::low_get_pc)
(m68k_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-nios2-low.cc (class nios2_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(nios2_target::low_supports_breakpoints)
(nios2_target::low_get_pc)
(nios2_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-sh-low.cc (class sh_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(sh_target::low_supports_breakpoints)
(sh_target::low_get_pc)
(sh_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-xtensa-low.cc (class xtensa_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(xtensa_target::low_supports_breakpoints)
(xtensa_target::low_get_pc)
(xtensa_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-sparc-low.cc (class sparc_target)
<low_supports_breakpoints>
<low_get_pc>: Declare.
(sparc_target::low_supports_breakpoints)
(sparc_target::low_get_pc): Define.
(the_low_target): Remove the op fields.
* linux-tile-low.cc (class tile_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(tile_target::low_supports_breakpoints)
(tile_target::low_get_pc)
(tile_target::low_set_pc): Define.
(the_low_target): Remove the op fields.
* linux-aarch64-low.cc (class aarch64_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(aarch64_target::low_supports_breakpoints): Define.
(aarch64_get_pc): Turn into...
(aarch64_target::low_get_pc): ...this.
(aarch64_set_pc): Turn into...
(aarch64_target::low_set_pc): ...this.
(the_low_target): Remove the op fields.
* linux-mips-low.cc (class mips_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(mips_target::low_supports_breakpoints): Define.
(mips_get_pc): Turn into...
(mips_target::low_get_pc): ...this.
(mips_set_pc): Turn into...
(mips_target::low_set_pc): ...this.
(the_low_target): Remove the op fields.
* linux-ppc-low.cc (class ppc_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(ppc_target::low_supports_breakpoints): Define.
(ppc_get_pc): Turn into...
(ppc_target::low_get_pc): ...this.
(ppc_set_pc): Turn into...
(ppc_target::low_set_pc): ...this.
(the_low_target): Remove the op fields.
* linux-riscv-low.cc (class riscv_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(riscv_target::low_supports_breakpoints): Define.
(riscv_get_pc): Turn into...
(riscv_target::low_get_pc): ...this.
(riscv_set_pc): Turn into...
(riscv_target::low_set_pc): ...this.
(the_low_target): Remove the op fields.
* linux-s390-low.cc (class s390_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(s390_target::low_supports_breakpoints): Define.
(s390_get_pc): Turn into...
(s390_target::low_get_pc): ...this.
(s390_set_pc): Turn into...
(s390_target::low_set_pc): ...this.
(the_low_target): Remove the op fields.
* linux-tic6x-low.cc (class tic6x_target)
<low_supports_breakpoints>
<low_get_pc>
<low_set_pc>: Declare.
(tic6x_target::low_supports_breakpoints): Define.
(tic6x_get_pc): Turn into...
(tic6x_target::low_get_pc): ...this.
(tic6x_set_pc): Turn into...
(tic6x_target::low_set_pc): ...this.
(the_low_target): Remove the op fields.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'fetch_register' linux target op into a method of
linux_process_target.
* linux-low.h (struct linux_target_ops) <fetch_register>: Remove.
(class linux_process_target) <low_fetch_register>: Declare.
* linux-x86-low.cc (the_low_target)
* linux-aarch64-low.cc (the_low_target)
* linux-arm-low.cc (the_low_target)
* linux-bfin-low.cc (the_low_target)
* linux-cris-low.cc (the_low_target)
* linux-crisv32-low.cc (the_low_target)
* linux-m32r-low.cc (the_low_target)
* linux-m68k-low.cc (the_low_target)
* linux-nios2-low.cc (the_low_target)
* linux-ppc-low.cc (the_low_target)
* linux-s390-low.cc (the_low_target)
* linux-sh-low.cc (the_low_target)
* linux-sparc-low.cc (the_low_target)
* linux-tic6x-low.cc (the_low_target)
* linux-tile-low.cc (the_low_target)
* linux-xtensa-low.cc (the_low_target): Remove the op field.
* linux-ia64-low.cc (class ia64_target) <low_fetch_register>:
Declare.
(ia64_fetch_register): Turn into...
(ia64_target::low_fetch_register): ...this.
(the_low_target): Remove the op field.
* linux-mips-low.cc (class mips_target) <low_fetch_register>:
Declare.
(mips_fetch_register): Turn into...
(mips_target::low_fetch_register): ...this.
(the_low_target): Remove the op field.
* linux-riscv-low.cc (class riscv_target) <low_fetch_register>:
Declare.
(riscv_fetch_register): Turn into...
(riscv_target::low_fetch_register): ...this.
(the_low_target): Remove the op field.
Update the callers below.
* linux-low.cc (linux_process_target::fetch_registers)
(linux_process_target::low_fetch_register)
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'cannot_fetch_register' and 'cannot_store_register'
linux target ops into methods of linux_process_target.
* linux-low.h (struct linux_target_ops): Remove the low target ops.
(class linux_process_target) <fetch_register>
<store_register>
<usr_fetch_inferior_registers>
<usr_store_inferior_registers>
<low_cannot_fetch_register>
<low_cannot_fetch_register> Declare.
* linux-low.cc (fetch_register): Turn into...
(linux_process_target::fetch_register): ...this.
(store_register): Turn into ...
(linux_process_target::store_register): ...this.
(usr_fetch_inferior_registers): Turn into...
(linux_process_target::usr_fetch_inferior_registers): ...this.
(usr_store_inferior_registers): Turn into...
(linux_process_target::usr_store_inferior_registers): ...this.
* linux-x86-low.cc (class x86_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(x86_cannot_store_register): Turn into...
(x86_target::low_cannot_store_register): ...this.
(x86_cannot_fetch_register): Turn into...
(x86_target::low_cannot_fetch_register): ...this.
(the_low_target): Remove the target op fields.
* linux-aarch64-low.cc (class aarch64_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(aarch64_target::low_cannot_fetch_register)
(aarch64_target::low_cannot_store_register): Define.
(the_low_target): Remove the op fields.
* linux-arm-low.cc (class arm_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(arm_cannot_fetch_register): Turn into...
(arm_target::low_cannot_fetch_register): ...this.
(arm_cannot_store_register): Turn into...
(arm_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-bfin-low.cc (class bfin_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(bfin_cannot_fetch_register): Turn into...
(bfin_target::low_cannot_fetch_register): ...this.
(bfin_cannot_store_register): Turn into...
(bfin_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-cris-low.cc (class cris_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(cris_cannot_fetch_register): Turn into...
(cris_target::low_cannot_fetch_register): ...this.
(cris_cannot_store_register): Turn into...
(cris_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-crisv32-low.cc (class crisv32_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(crisv32_target::low_cannot_fetch_register)
(crisv32_target::low_cannot_store_register): Define.
(the_low_target): Remove the op fields.
* linux-ia64-low.cc (class ia64_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(ia64_cannot_fetch_register): Turn into...
(ia64_target::low_cannot_fetch_register): ...this.
(ia64_cannot_store_register): Turn into...
(ia64_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-m32r-low.cc (class m32r_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(m32r_cannot_fetch_register): Turn into...
(m32r_target::low_cannot_fetch_register): ...this.
(m32r_cannot_store_register): Turn into...
(m32r_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-m68k-low.cc (class m68k_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(m68k_cannot_fetch_register): Turn into...
(m68k_target::low_cannot_fetch_register): ...this.
(m68k_cannot_store_register): Turn into...
(m68k_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-mips-low.cc (class mips_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(mips_cannot_fetch_register): Turn into...
(mips_target::low_cannot_fetch_register): ...this.
(mips_cannot_store_register): Turn into...
(mips_target::low_cannot_store_register): ...this.
(get_usrregs_info): Inline at the call sites in
low_cannot_fetch_register and low_cannot_store_register,
and remove.
(the_low_target): Remove the op fields.
* linux-nios2-low.cc (class nios2_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(nios2_cannot_fetch_register): Turn into...
(nios2_target::low_cannot_fetch_register): ...this.
(nios2_cannot_store_register): Turn into...
(nios2_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-ppc-low.cc (class ppc_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(ppc_cannot_fetch_register): Turn into...
(ppc_target::low_cannot_fetch_register): ...this.
(ppc_cannot_store_register): Turn into...
(ppc_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-riscv-low.cc (class riscv_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(riscv_target::low_cannot_fetch_register)
(riscv_target::low_cannot_store_register): Define.
(the_low_target): Remove the op fields.
* linux-s390-low.cc (class s390_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(s390_cannot_fetch_register): Turn into...
(s390_target::low_cannot_fetch_register): ...this.
(s390_cannot_store_register): Turn into...
(s390_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-sh-low.cc (class sh_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(sh_cannot_fetch_register): Turn into...
(sh_target::low_cannot_fetch_register): ...this.
(sh_cannot_store_register): Turn into...
(sh_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-sparc-low.cc (class sparc_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(sparc_cannot_fetch_register): Turn into...
(sparc_target::low_cannot_fetch_register): ...this.
(sparc_cannot_store_register): Turn into...
(sparc_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-tic6x-low.cc (class tic6x_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(tic6x_cannot_fetch_register): Turn into...
(tic6x_target::low_cannot_fetch_register): ...this.
(tic6x_cannot_store_register): Turn into...
(tic6x_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-tile-low.cc (class tile_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(tile_cannot_fetch_register): Turn into...
(tile_target::low_cannot_fetch_register): ...this.
(tile_cannot_store_register): Turn into...
(tile_target::low_cannot_store_register): ...this.
(the_low_target): Remove the op fields.
* linux-xtensa-low.cc (class xtensa_target)
<low_cannot_fetch_register>
<low_cannot_store_register>: Declare.
(xtensa_target::low_cannot_fetch_register)
(xtensa_target::low_cannot_store_register): Define.
(the_low_target): Remove the op fields.
|
|
gdbserver/ChangeLog:
2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Turn the 'regs_info' linux target op into a method of
linux_process_target.
* linux-low.h (struct linux_target_ops) <regs_info>: Remove.
(class linux_process_target) <get_regs_info>: Define.
Update the callers below.
* linux-low.cc (linux_process_target::fetch_registers)
(linux_process_target::store_registers)
* proc-service.cc (gregset_info)
* linux-x86-low.cc (class x86_target) <get_regs_info>: Declare.
(x86_linux_regs_info): Turn into ...
(x86_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-aarch64-low.cc (class aarch64_target) <get_regs_info>:
Declare.
(aarch64_regs_info): Turn into ...
(aarch64_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-arm-low.cc (class arm_target) <get_regs_info>: Declare.
(arm_regs_info): Turn into ...
(arm_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-bfin-low.cc (class bfin_target) <get_regs_info>: Declare.
(bfin_regs_info): Turn into ...
(bfin_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-cris-low.cc (class cris_target) <get_regs_info>: Declare.
(cris_regs_info): Turn into ...
(cris_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-crisv32-low.cc (class crisv32_target) <get_regs_info>:
Declare.
(crisv32_regs_info): Turn into ...
(crisv32_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-ia64-low.cc (class ia64_target) <get_regs_info>: Declare.
(ia64_regs_info): Turn into ...
(ia64_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-m32r-low.cc (class m32r_target) <get_regs_info>: Declare.
(m32r_regs_info): Turn into ...
(m32r_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-m68k-low.cc (class m68k_target) <get_regs_info>: Declare.
(m68k_regs_info): Turn into ...
(m68k_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-mips-low.cc (class mips_target) <get_regs_info>: Declare.
(mips_regs_info): Turn into ...
(mips_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
(get_usrregs_info): Update the call to the op.
* linux-nios2-low.cc (class nios2_target) <get_regs_info>: Declare.
(nios2_regs_info): Turn into ...
(nios2_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-ppc-low.cc (class ppc_target) <get_regs_info>: Declare.
(ppc_regs_info): Turn into ...
(ppc_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-riscv-low.cc (class riscv_target) <get_regs_info>: Declare.
(riscv_regs_info): Turn into ...
(riscv_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-s390-low.cc (class s390_target) <get_regs_info>: Declare.
(s390_regs_info): Turn into ...
(s390_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
(s390_collect_ptrace_register)
(s390_supply_ptrace_register)
(s390_fill_gregset): Update the call to the op.
* linux-sh-low.cc (class sh_target) <get_regs_info>: Declare.
(sh_regs_info): Turn into ...
(sh_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-sparc-low.cc (class sparc_target) <get_regs_info>: Declare.
(sparc_regs_info): Turn into ...
(sparc_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-tic6x-low.cc (class tic6x_target) <get_regs_info>: Declare.
(tic6x_regs_info): Turn into ...
(tic6x_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-tile-low.cc (class tile_target) <get_regs_info>: Declare.
(tile_regs_info): Turn into ...
(tile_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
* linux-xtensa-low.cc (class xtensa_target) <get_regs_info>:
Declare.
(xtensa_regs_info): Turn into ...
(xtensa_target::get_regs_info): ...this.
(the_low_target): Remove the op field.
|
