| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
(make_exec_error_cleanup): Remove declarations.
* utils.c (exec_error_cleanup_chain): Remove.
(do_exec_error_cleanups, discard_exec_error_cleanups)
(make_exec_error_cleanup): Remove.
* event-loop.c (start_event_loop): Adjust call to
async_enable_stdin.
* event-top.c (async_enable_stdin): Remove the paramater dummy.
(async_disable_stdin): Don't register async_enable_stdin via
cleanup.
* inf-loop.c (inferior_event_handler): Don't
call do_exec_error_cleanups. Call async_enable_stdin instead.
* event-loop.c (start_event_loop): Adjust call to
async_enable_stdin.
* tui/tui-interp.c (tui_command_loop): Adjust call to
async_enable_stdin.
|
|
* Makefile.in (infcmd.o, inf-loop.o): Update dependencies.
* breakpoint.c (bpstat_do_actions): In async mode,
don't jump to top expecting stop_bpstat to be already
updated.
* event-loop.c (start_event_loop): Call async_enable_stdin
on exception.
* event-top.c (async_enable_stdin): Do nothing if sync_execution
is not set.
(command_handler): Do not setup continuation here.
(command_line_handler_continuation): Move to...
* top.c (command_line_handler_continuation): ... here.
(execute_command): In async mode, register continuation.
Don't check frame's language in running in async mode.
* exceptions.c (throw_exception): Don't do exec_error_cleanups.
* inf-loop.c (complete_execution): Inline into...
(inferior_event_handler): ... here. Clear target_executing before
doing any cleanups. Don't try to show prompt if the target was
resumed.
* infcmd.c (signal_command): Add support for async mode.
(finish_command): Only add continuation if the target was
successfully resumed.
* remote.c (init_async_opts): Register to_get_thread_local_address
handler.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Don't mess
with sync_execution.
* tui/tui-interp.c (tui_command_loop): Call async_enable_stdin
on exception.
|
|
* doc/observer.texi (new_thread): Document.
* observer.sh: Forward declare struct thread_info.
* thread.c (add_thread): Notify observer.
* interps.h (interp_init_ftype): New parameter
top_level.
(interp_set): Likewise.
(top_level_interpreter_data): Declare.
* interps.c (interp_set): New parameter top_level.
Pass it to interpreter's init function. Remember
top level interpreter.
(interpreter_exec_cmd): Adjust.
(top_level_interpreter_data): New.
* main.c (captured_main): Pass 1 for top_level
parameter of interp_set.
* cli/cli-interp.c (cli_interpreter_init): New
parameter top_level.
* tui/tui-interp.c (tui_init): New parameter top_level.
* mi/mi-interp.c (mi_new_thread): New.
(mi_interpreter_init): If top level, register
observer for new threads.
* Makefile.in (mi-interp.o, thread.o): Update dependencies.
|
|
|
|
value or to PATH_MAX when possible.
|
|
|
|
* tui/tui-interp.c (tui_init): Initialize tui's SIGWINCH
signal handler.
* tui/tui-win.c (tui_initialize_win): New function for
initializing tui's SIGWINCH signal handler.
* tui/tui-win.h (tui_initialize_win): Declare.
|
|
* breakpoint.h (struct breakpoint): Move the cond
field to...
(struct bp_location): Here.
* breakpoint.c (condition_command, bpstat_stop_status)
(print_one_breakpoint, allocate_bp_location)
(solib_load_unload_1, create_fork_vfork_event_catchpoint)
(create_exec_event_catchpoint, create_breakpoints)
(break_command_1, watch_command_1, handle_gnu_v3_exceptions)
(create_ada_exception_breakpoint, set_breakpoint_sal)
(delete_breakpoint, breakpoint_re_set_one): Adjust.
* tui/tui-winsource.c (tui_update_breakpoint_info): Adjust.
|
|
Switch the license of all .h files to GPLv3.
Switch the license of all .cc files to GPLv3.
|
|
* tui-command.c, tui-data.c, tui-disasm.c, tui-file.c, tui-io.c,
tui-layout.c, tui-regs.c, tui-source.c, tui-win.c, tui-windata.c,
tui-wingeneral.c, tui-winsource.c: Coding standard, && and ||
go at beginning of new line.
|
|
* tui-data.c, tui-data.h, tui-disasm.c, tui-disasm.h, tui-hooks.c,
tui-io.c, tui-layout.c, tui-layout.h, tui-out.c, tui-regs.c,
tui-source.c, tui-source.h, tui-stack.c, tui-win.c, tui-win.h,
tui-windata.c, tui-windata.h, tui-wingeneral.c, tui-winsource.c,
tui-winsource.h, tui.c, tui.h: Function declarations and
definitions, wrap long lines.
|
|
* tui-command.c, tui-data.c, tui-disasm.c, tui-layout.c,
tui-regs.c, tui-win.c, tui-windata.c, tui-winsource.c, tui.c:
Reformat block comments to GNU standard.
|
|
* tui-command.c, tui-data.c, tui-data.h, tui-disasm.c, tui-file.c,
tui-hooks.c, tui-interp.c, tui-io.c, tui-layout.c, tui-out.c,
tui-regs.c, tui-regs.h, tui-source.c, tui-stack.c, tui-win.c,
tui-windata.c, tui-wingeneral.c, tui-winsource.c, tui-winsource.h,
tui.c, tui.h: Comment reformatting to coding standard (capitals,
spaces after periods, etc).
|
|
* tui-data.c, tui-data.h, tui-disasm.c, tui-hooks.c, tui-layout.c,
tui-regs.c, tui-source.c, tui-stack.c, tui-win.c, tui-windata.c,
tui-wingeneral.c, tui-wingeneral.h, tui-winsource.c, tui.c,
tui-winsource.h: Whitespace changes, fix pointer declarations
to be consistant.
|
|
* tui/tui-winsource.c (tui_alloc_source_buffer): Clean up allocation.
|
|
* tui/tui-layout.c (tui_set_layout): Dead code, dead variable.
|
|
* tui/tui-data.c (tui_alloc_content): Move assign out of if,
clean up long lines.
(tui_alloc_generic_win_info): Tidy by using XMALLOC macro.
(tui_alloc_win_info): Ditto.
(tui_add_content_elements): Ditto.
* tui/tui-file.c (tui_file_magic): Ditto.
|
|
* tui/tui-data.c (tui_alloc_generic_win_info): Wrong arg for sizeof.
|
|
* event-top.c (cli_command_loop): Prompt string can (and should)
be freed after call to readline (Coverity). Also move local var
declarations into block where they are used.
* tui/tui-interp.c (tui_command_loop): Prompt string can (and
should) be freed after call to readline (Coverity). Also move
local var declarations into block where they are used.
|
|
* disasm.c (gdb_print_insn): Return the number of branch delay
slot instructions too.
* disasm.h (gdb_print_insn): Update prototype.
* printcmd.c (branch_delay_insns): New variable to record the
number of delay slot instructions after disassembling a branch.
(print_formatted): Record the number of branch delay slot
instructions.
(do_examine): When disassembling, if the last instruction
disassembled has any branch delay slots, then bump the count so
that they get disassembled too.
* tui/tui-disasm.c (tui_disassemble): Update the call to
gdb_print_insn().
* NEWS: Document the new behaviour.
gdb/doc/:
* gdb.texinfo (Examining Memory): Document the new behaviour.
gdb/gdbtk/:
* generic/gdbtk-cmds.c (gdbtk_load_asm): Update the call to
gdb_print_insn().
|
|
* gdbarch.sh (NUM_REGS): Replace by gdbarch_num_regs.
* i386-tdep.c (i386_dbx_reg_to_regnum)
(i386_svr4_reg_to_regnum): Likewise.
* inf-ptrace.c (inf_ptrace_fetch_registers)
(inf_ptrace_store_registers): Likewise.
* corelow.c (get_core_registers): Likewise.
* i386-linux-nat.c (supply_gregset, fill_gregset)
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers): Likewise.
* remote.c (init_remote_state,packet_reg_from_regnum)
(packet_reg_from_pnum,process_g_packet,remote_fetch_registers)
(remote_prepare_to_store,store_registers_using_G)
(remote_store_registers,remote_arch_state): Likewise.
* tracepoint.c (encode_actions): Likewise.
* mi/mi-main.c (mi_cmd_data_list_register_names)
(mi_cmd_data_list_changed_registers,mi_cmd_data_list_register_values)
(mi_cmd_data_write_register_values): Likewise.
* tui/tui-regs.c (tui_show_register_group)
(tui_show_register_group): Likewise.
* xtensa-tdep.h (FP_ALIAS): Likewise.
* xtensa-tdep.c (xtensa_register_name,xtensa_register_type)
(xtensa_reg_to_regnum,xtensa_pseudo_register_read)
(xtensa_pseudo_register_write,xtensa_register_reggroup_p): Likewise.
* win32-nat.c (do_win32_fetch_inferior_registers)
(do_win32_store_inferior_registers,fetch_elf_core_registers
* user-regs.h: Likewise (comment).
* user-regs.c (user_reg, user_reg_map_name_to_regnum): Likewise.
* trad-frame.c (trad_frame_alloc_saved_regs): Likewise.
* target-descriptions.h: Likewise (comment).
* target-descriptions.c (tdesc_use_registers): Likewise (comment).
* target.c (debug_print_register): Likewise.
* stack.c (frame_info): Likewise.
* stabsread.c (define_symbol): Likewise.
* sh64-tdep.c (sh64_do_pseudo_register,sh64_print_register)
(sh64_media_print_registers_info)
(sh64_compact_print_registers_info): Likewise.
* rs6000-tdep.c (rs6000_register_sim_regno): Likewise.
* rs6000-nat.c (fetch_register,store_register): Likewise.
* remote-sim.c (one2one_register_sim_regno,gdbsim_fetch_register)
(gdbsim_fetch_register,gdbsim_store_register): Likewise.
* remote-mips.c (mips_fetch_registers,mips_store_registers): Likewise.
* remote-m32r-sdi.c (m32r_fetch_registers)
(m32r_store_registers): Likewise.
* reggroups.c (default_register_reggroup_p): Likewise.
* regcache.c (init_regcache_descr,register_size,regcache,regcache_save)
(regcache_restore,regcache_dump): Likewise.
* monitor.c (monitor_fetch_registers,monitor_store_registers): Likewise.
* mips-tdep.c (mips_xfer_register,mips_register_name)
(mips_register_reggroup_p,mips_pseudo_register_read)
(mips_pseudo_register_write,mips_convert_register_p,mips_register_type)
(mips_unwind_pc,mips_unwind_sp,mips_unwind_dummy_id,set_reg_offset)
(mips16_scan_prologue,mips_insn16_frame_cache,reset_saved_regs)
(mips32_scan_prologue,mips_insn32_frame_cache,read_next_frame_reg)
(mips_n32n64_return_value,mips_o32_return_value,mips_o64_return_value)
(print_gp_register_row,mips_print_registers_info)
(mips_stab_reg_to_regnum,mips_dwarf_dwarf2_ecoff_reg_to_regnum)
(mips_register_sim_regno): Likewise.
* mips-linux-tdep.c (mips_linux_o32_sigframe_init)
(mips_linux_n32n64_sigframe_init): Likewise.
* mips-linux-nat.c (mips_linux_register_addr)
(mips64_linux_register_addr): Likewise.
* findvar.c (value_of_register): Likewise.
* infcmd.c (default_print_registers_info,registers_info)
(print_vector_info,print_float_info): Likewise.
* mips64obsd-tdep.c (mips64obsd_sigframe_init): Likewise.
* inf-child.c (inf_child_fetch_inferior_registers): Likewise.
* m68k-tdep.c (m68k_dwarf_reg_to_regnum): Likewise.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache(: Likewise.
* m32r-tdep.c (m32r_frame_unwind_cache): Likewise.
* ia64-linux-nat.c (ia64_register_addr,ia64_cannot_fetch_register)
(ia64_cannot_store_register,ia64_linux_fetch_registers)
(ia64_linux_store_registers): Likewise.
* hpux-thread.c (hpux_thread_fetch_registers)
(hpux_thread_store_registers): Likewise.
* h8300-tdep.c (E_PSEUDO_CCR_REGNUM,E_PSEUDO_EXR_REGNUM)
(h8300_init_frame_cache,h8300_frame_cache,h8300_frame_prev_register)
(h8300_register_type): Likewise.
* dwarf2-frame.c (dwarf2_frame_cache)
(dwarf2_frame_state_alloc_regs): Likewise.
* cris-tdep.c (cris_register_size,cris_cannot_fetch_register)
(cris_cannot_store_register,crisv32_cannot_fetch_register)
(crisv32_cannot_store_register,cris_register_name): Likewise.
* avr-tdep.c (avr_frame_unwind_cache): Likewise.
* arch-utils.c (legacy_register_sim_regno)
(legacy_virtual_frame_pointer): Likewise.
* arm-tdep.c (arm_make_prologue_cache,arm_register_sim_regno):Likewise.
* arm-tdep.h: Likewise (comment).
* frv-tdep.c (frv_register_sim_regno): Likewise.
* m68klinux-nat.c (old_fetch_inferior_registers)
(old_store_inferior_registers): Likewise.
* m32c-tdep.c (m32c_virtual_frame_pointer): Likewise.
* irix5-nat.c (fetch_core_registers): Likewise.
* hppa-tdep.c (hppa_frame_cache): Likewise.
* hppa-linux-nat.c (hppa_linux_register_addr)
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Likewise.
* hppa-hpux-nat.c (hppa_hpux_fetch_inferior_registers)
(hppa_hpux_store_inferior_registers): Likewise.
* amd64-nat.c (amd64_native_gregset_reg_offset)
(amd64_supply_native_gregset,amd64_collect_native_gregset): Likewise.
* dbug-rom.c (dbug_regname): Likewise.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache)
(HARD_PAGE_REGNUM (comment)): Likewise.
* gdbarch.sh (NUM_PSEUDO_REGS): Replace by gdbarch_num_pseudo_regs.
* i386-tdep.c (i386_dbx_reg_to_regnum)
(i386_svr4_reg_to_regnum): Likewise.
* mi/mi-main.c (mi_cmd_data_list_register_names)
(mi_cmd_data_list_changed_registers,mi_cmd_data_list_register_values)
(mi_cmd_data_write_register_values): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.
* tui/tui-regs.c (tui_show_register_group): Likewise.
* xtensa-tdep.h (FP_ALIAS): Likewise.
* user-regs.h: Likewise (comment).
* user-regs.c (user_reg, user_reg_map_name_to_regnum): Likewise.
* trad-frame.c (trad_frame_alloc_saved_regs): Likewise.
* target-descriptions.h: Likewise (comment).
* target.c (debug_print_register): Likewise.
* stack.c (frame_info): Likewise.
* stabsread.c (define_symbol): Likewise.
* sh64-tdep.c (sh64_print_register,sh64_media_print_registers_info)
(sh64_compact_print_registers_info): Likewise.
* rs6000-tdep.c (rs6000_register_sim_regno): Likewise.
* regcache.c (init_regcache_descr,register_size,regcache,regcache_save
(regcache_restore,regcache_dump): Likewise.
* mips-tdep.c (print_gp_register_row,mips_print_registers_info)
(mips_dwarf_dwarf2_ecoff_reg_to_regnum)
(mips_stab_reg_to_regnum): Likewise.
* findvar.c (value_of_register): Likewise.
* infcmd.c (default_print_registers_info,registers_info)
(print_vector_info,print_float_info): Likewise.
* m68k-tdep.c (m68k_dwarf_reg_to_regnum): Likewise.
* h8300-tdep.c (h8300_register_type): Likewise.
* dwarf2-frame.c (dwarf2_frame_cache): Likewise.
* frame.h (SIZEOF_FRAME_SAVED_REGS): Likewise.
* xtensa-tdep.c (xtensa_register_type,xtensa_reg_to_regnum)
(xtensa_pseudo_register_read,xtensa_pseudo_register_write): Likewise.
* parse.c: Remove comment.
* gdbarch.c, gdbarch.h: Regenerate
|
|
* observer.texi (GDB Observers): New observer "new_objfile".
ChangeLog:
* observer.sh: Add "struct objfile" forward declaration.
* target.h (deprecated_target_new_objfile_hook): Remove.
* symfile.c (deprecated_target_new_objfile_hook): Remove.
(clear_symtab_users): Call observer_notify_new_objfile.
(symbol_file_add_with_addrs_or_offsets): Likewise.
* rs6000-nat.c: Include "observer.h".
(vmap_ldinfo): Call observer_notify_new_objfile.
(xcoff_relocate_core): Likewise.
* remote.c (remote_new_objfile_chain): Remove.
(remote_new_objfile): Do not call remote_new_objfile_chain.
(_initialize_remote): Use observer_attach_new_objfile.
* tui/tui-hooks.c (tui_target_new_objfile_chain): Remove.
(tui_new_objfile_hook): Do not call tui_target_new_objfile_chain.
(_initialize_tui_hooks): Use observer_attach_new_objfile.
* aix-thread.c: Include "observer.h".
(target_new_objfile_chain): Remove.
(new_objfile): Do not call target_new_objfile_chain.
(_initialize_aix_thread): Use observer_attach_new_objfile.
* hpux-thread.c: Include "observer.h"
(target_new_objfile_chain): Remove.
(hpux_thread_new_objfile): Make static. Do not call
target_new_objfile_chain.
(_initialize_hpux_thread): Use observer_attach_new_objfile.
* linux-thread-db.c: Include "observer.h".
(target_new_objfile_chain): Remove.
(thread_db_new_objfile): Do not call target_new_objfile_chain.
(_initialize_thread_db): Use observer_attach_new_objfile.
* sol-thread.c: Include "observer.h".
(target_new_objfile_chain): Remove.
(sol_thread_new_objfile): Make static. Do not call
target_new_objfile_chain.
(_initialize_sol_thread): Use observer_attach_new_objfile.
* Makefile.in (aix-thread.o, hpux-thread.o, linux-thread-db.o,
rs6000-nat.o, sol-thread.o, tui-hooks.o): Add dependency on
$(observer_h).
|
|
(register_cached): Remove.
(set_register_cached): Remove.
(deprecated_registers_fetched): Remove.
(registers_changed): Use regcache_invalidate instead
of set_register_cached.
(regcache_raw_read): Update comment.
* regcache.h (regcache_invalidate): Add prototype.
(register_cached): Remove.
(set_register_cached): Remove.
(deprecated_registers_fetched): Remove.
* findvar.c (value_of_register): Do not call register_cached.
* frame.c (frame_register): Likewise.
* tui/tui-regs.c (tui_get_register): Likewise.
* remote.c (fetch_register_using_p): Do not call set_register_cached.
(process_g_packet): Likewise.
(remote_fetch_registers): Likewise.
* remote-sim.c (gdbsim_fetch_register): Likewise.
* mt-tdep.c (mt_select_coprocessor): Replace set_register_cached call
by regcache_invalidate.
(mt_pseudo_register_write): Likewise.
* sh-tdep.c (sh_pseudo_register_write): Likewise.
* corelow.c (get_core_registers): Replace deprecated_registers_fetched
call by loop over regcache_raw_supply (..., NULL).
|
|
* interps.c (clear_interpreter_hooks): Do not clear
deprecated_registers_changed_hook.
* regcache.c (registers_changed): Do not call it.
* top.c (deprecated_registers_changed_hook): Do not define it.
* mi/mi-interp.c (mi_command_loop): Do not clear it.
* tui/tui-hooks.c (tui_install_hooks): Do not install it.
(tui_remove_hooks): Do not remove it.
(tui_selected_frame_level_changed_hook): Check for negative level.
Use get_selected_frame.
(tui_registers_changed_hook): Deleted.
|
|
get_selected_frame by deprecated_safe_get_selected_frame.
|
|
(selected_frame): ...this. Make static.
(get_selected_frame, select_frame): Update.
* frame.h (deprected_select_frame): Delete.
(deprecated_safe_get_selected_frame): Update comments.
* breakpoint.c, cli/cli-cmds.c, f-valprint.c, infcmd.c, inflow.c,
infrun.c, stack.c, tui/tui-disasm.c, tui/tui-source.c,
tui/tui-winsource.c, valops.c, varobj.c, findvar.c, macroscope.c,
parse.c, regcache.h, sh64-tdep.c, tui/tui-hooks.c, tui/tui-win.c,
tui/tui.c: Replace references to deprecated_selected_frame.
|
|
* gdbarch.h: Regenerated.
* arch-utils.c (generic_register_size): Call register_type.
* ia64-tdep.c (ia64_extract_return_value): Likewise.
* m32c-tdep.c (check_for_saved): Likewise.
* mips-tdep.c (mips_print_register, print_gp_register_row)
(mips_print_registers_info): Likewise.
* sh-tdep.c (sh_pseudo_register_read, sh_pseudo_register_write):
Likewise.
* sh64-tdep.c (sh64_pseudo_register_read, sh64_pseudo_register_write)
(sh64_do_register, sh64_print_register)
(sh64_media_print_registers_info): Likewise.
* tui/tui-regs.c (tui_register_format): Likewise.
|
|
|
|
* ada-lang.c (find_struct_field): Initialize *byte_offset_p.
* breakpoint.c (do_enable_breakpoint): Ignore both mem_cnt and i.
* c-typeprint.c (c_type_print_varspec_suffix): Don't test length
greater than or equal to zero.
* m2-typeprint.c (m2_array): Likewise.
* p-typeprint.c (pascal_type_print_varspec_prefix): Likewise.
* gdbtypes.c (copy_type_recursive): Correct == typo.
* i386-tdep.c (i386_skip_prologue): Remove stray semicolon.
* linux-nat.c (linux_nat_info_proc_cmd): Don't compare a pointer
greater than zero.
* macroscope.c (sal_macro_scope): Don't name a local variable "main".
(default_macro_scope): Remove unused variable.
* prologue-value.h (pv_area_find_reg): Don't name an argument
"register".
* remote-fileio.c (remote_fio_func_map): Add missing braces.
* remote.c (sigint_remote_twice_token, sigint_remote_token): Change
type.
(cleanup_sigint_signal_handler): Remove casts.
* valprint.c (val_print): Use a volatile local for the modified
argument.
* varobj.c (languages): Remove extra array dimension.
(varobj_create): Correct access to languages array.
* mi/mi-cmd-break.c (mi_cmd_break_insert, mi_cmd_break_watch): Add
missing braces.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Likewise.
* mi/mi-cmd-env.c (mi_cmd_env_path, mi_cmd_env_dir): Likewise.
* mi/mi-getopt.c (mi_valid_noargs): Likewise.
* mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
(mi_cmd_data_write_memory): Likewise.
* signals/signals.c (target_signal_to_string): Cast to int before
comparing.
* tui/tui-layout.c (init_and_make_win): Take and return a void *.
Update all callers.
|
|
* tui/tui-source.c (tui_set_source_content): handle source
files that contain non unix end-of-line.
|
|
mismatch.
* tui/tui-stack.c (tui_show_frame_info): Likewise.
|
|
* top.c (in_user_command): New.
(command_line_input): Use input_from_terminal_p.
(input_from_terminal_p): Don't check caution. Handle
stdin == NULL for Insight.
* top.h (in_user_command, caution): New declarations.
* utils.c: Include "top.h".
(query, defaulted_query): Check caution here. Move the call
to input_from_terminal_p higher.
* cli/cli-script.c (do_restore_user_call_depth): Only decrement
the depth. Update in_user_command if necessary.
(execute_user_command): Don't clobber old_chain. Set
in_user_command. Let do_restore_user_call_depth handle
user_call_depth.
(read_command_lines): Check whether to prompt before calling
Insight hooks.
* tui/tui-hooks.c (tui_query_hook): Remove newly unnecessary
input_from_terminal_p check.
|
|
|
|
it in. Undefine HAVE_LONG_DOUBLE otherwise.
(DOUBLEST_FORMAT): New.
* c-exp.y (parse_number): Use it.
* jv-exp.y (parse_number): Likewise.
* objc-exp.y (parse_number): Likewise.
* p-exp.y (parse_number): Likewise.
* varobj.c (free_variable): Silence type-punning warnings.
* tui/tui-data.h (struct tui_list): Change type of list member.
* tui/tui-data.c: Remove no-longer-needed type casts.
(source_windows): Silence type-punning warnings.
* tui/tui-stack.c, tui/tui-win.c, tui/tui-winsource.c: Likewise.
|
|
* tui/tui-disasm.c:
* tui/tui-data.h:
* tui/tui-data.c:
* tui/tui-command.h:
* tui/tui-command.c:
* tui/tui-win.h:
* tui/tui-win.h:
* tui/tui-win.c:
* tui/tui-stack.h:
* tui/tui-stack.c:
* tui/tui-source.h:
* tui/tui-source.c:
* tui/tui-regs.h:
* tui/tui-regs.c:
* tui/tui-out.c:
* tui/tui-main.c:
* tui/tui-layout.h:
* tui/tui-layout.c:
* tui/tui-io.h:
* tui/tui-io.c:
* tui/tui-interp.c:
* tui/tui-hooks.h:
* tui/tui-hooks.c:
* tui/tui-file.h:
* tui/tui.h:
* tui/tui.c:
* tui/tui-winsource.h:
* tui/tui-winsource.c:
* tui/tui-wingeneral.h:
* tui/tui-wingeneral.c:
* tui/tui-windata.h:
* tui/tui-windata.c: Add (C) after Copyright. Update the FSF
address.
|
|
* tui/tui-command.c (tui_dispatch_ctrl_char): Handle CTRL-L even if the
focus is on the command window.
|
|
tui_term_height() to restore the terminal size when leaving the
TUI mode.
|
|
* main.c (main): Use INTERP_TUI instead of "tui".
Set interpreter to INTERP_INSIGHT when '-w' given.
* interps.h (INTERP_INSIGHT): New define.
* tui/tui-interp.c (_initialize_tui_interp): Use INTERP_TUI instead
of "tui".
|
|
* tui/tui-data.h (tui_line_or_address): Encapsulate the union in a
struct with a tag.
(tui_source_element, tui_source_info): Update.
* tui/tui-disasm.c, tui/tui-source.c: Update to use the tagged union.
* tui/tui-source.h, tui/tui-stack.c, tui/tui-win.c: Likewise.
* tui/tui-winsource.c, tui/tui-data.c, tui/tui-layout.c: Likewise.
* tui/tui-winsource.h: Likewise.
|
|
* tui/tui-command.c (tui_dispatch_ctrl_char): Test output of
getenv() before using it.
|
|
gdb/
* cli-out.c (cli_field_fmt, cli_message, out_field_fmt): Add
ATTR_FORMAT or ATTRIBUTE_FPTR_PRINTF.
* complaints.c (vcomplaint): Likewise.
* defs.h (xvasprintf, xstrvprintf, verror, vfatal)
(internal_verror, internal_vwarning, vwarning)
(deprecated_query_hook, deprecated_warning_hook)
(deprecated_readline_begin_hook): Likewise.
* disasm.c (fprintf_disasm): Likewise.
* exceptions.c (throw_it): Likewise.
* exceptions.h (throw_verror, throw_vfatal): Likewise.
* mi/mi-interp.c (mi_interp_query_hook): Likewise.
* mi/mi-out.c (mi_field_fmt, mi_message): Likewise.
* tui/tui-hooks.c (tui_query_hook): Likewise.
* tui/tui-out.c (tui_field_fmt, tui_message, out_field_fmt):
Likewise.
* ui-out.c (default_field_fmt, default_message, uo_field_fmt)
(uo_message): Likewise.
* ui-out.h (ui_out_field_fmt, ui_out_message, field_fmt_ftype)
(message_ftype): Likewise.
* utils.c (vfprintf_maybe_filtered, internal_vproblem)
(defaulted_query, printchar): Likewise.
gdb/gdbserver/
* server.h (error, fatal, warning): Add ATTR_FORMAT.
|
|
scroll commands.
|
|
* jv-lang.c (get_java_utf8_name): Add cast.
(evaluate_subexp_java): Use gdb_byte for buffers.
* jv-valprint.c (java_value_print, java_value_print): Use gdb_byte
for buffers.
* scm-lang.c (scm_get_field, scm_unpack)
(scm_evaluate_string): Use gdb_byte for buffers.
(scm_lookup_name): Add cast.
* scm-valprint.c (scm_scmval_print, scm_scmval_print): Use
gdb_byte for buffers.
* tui/tui.h (tui_get_command_dimension): Make parameters unsigned.
* tui/tui.c (tui_get_command_dimension): Make parameters unsigned.
* value.h (check_field): Change "name" to a string.
* valops.c (check_field): Change "name" to a string.
* scm-lang.h (scm_parse): Use gdb_byte for buffers.
* source.c (get_current_source_symtab_and_line)
(set_current_source_symtab_and_line): Initialize all fields of sal
structures.
* cli/cli-cmds.c (list_command): Use gdb_byte for buffers.
|
|
* frame.h (frame_register_unwind, frame_unwind_register)
(get_frame_register, frame_register, put_frame_register)
(get_frame_memory, safe_frame_unwind_memory)
(frame_register_read): Use gdb_byte for byte buffer parameters.
* trad-frame.h (trad_frame_get_register)
(frame_get_prev_register): Ditto.
* frame-unwind.h (frame_prev_register_ftype): Ditto.
* frame.c (frame_pop, frame_register, frame_unwind_register)
(get_frame_register, frame_unwind_register_signed)
(frame_unwind_register_unsigned, frame_unwind_unsigned_register)
(frame_register_read, get_frame_memory): Update.
* trad-frame.c (trad_frame_get_prev_register): Update.
(trad_frame_get_register): Update.
* gdbcore.h (deprecated_read_memory_nobpt, read_memory): Ditto.
* breakpoint.c (deprecated_read_memory_nobpt): Update.
* corefile.c (read_memory): Update.
* tramp-frame.c (tramp_frame_prev_register): Update.
* valops.c (value_assign): Update.
* sentinel-frame.c (sentinel_frame_prev_register): Update.
* std-regs.c (value_of_builtin_frame_fp_reg)
(value_of_builtin_frame_pc_reg): Update.
* infcmd.c (default_print_registers_info): Update
* dummy-frame.c (dummy_frame_prev_register): Update.
* findvar.c (value_of_register, value_from_register): Update.
* tui/tui-regs.c (tui_register_format, tui_get_register): Update.
* mi/mi-main.c (register_changed_p, get_register): Update.
|
|
Rename 'struct exception' to 'struct gdb_exception'.
* wrapper.c: Update.
* varobj.c: Update.
* tui/tui-interp.c: Update.
* remote.c: Update.
* mi/mi-main.c: Update.
* mi/mi-interp.c: Update.
* linux-thread-db.c: Update.
* interps.h: Update.
* interps.c: Update.
* exceptions.h: Update.
* exceptions.c: Update.
* dwarf2loc.c: Update.
* cli/cli-interp.c: Update.
* cli/cli-script.c: Update.
* breakpoint.c: Update.
|
|
Add show_VARIABLE functions, update add_setshow call.
* varobj.c (_initialize_varobj, show_varobjdebug): Add and update.
* valprint.c (_initialize_valprint, show_print_max)
(show_stop_print_at_null, show_repeat_count_threshold)
(show_prettyprint_structs, show_unionprint)
(show_prettyprint_arrays, show_addressprint, show_input_radix)
(show_output_radix): Ditto.
* valops.c (_initialize_valops, show_overload_resolution): Ditto.
* utils.c (initialize_utils, show_chars_per_line)
(show_lines_per_page, show_demangle, show_pagination_enabled)
(show_sevenbit_strings, show_asm_demangle): Ditto
* tui/tui-win.c (_initialize_tui_win, show_tui_border_kind)
(show_tui_border_mode, show_tui_active_border_mode): Ditto.
* top.c (init_main, show_new_async_prompt)
(show_async_command_editing_p, show_write_history_p)
(show_history_size, show_history_filename, show_caution)
(show_annotation_level, init_main): Ditto.
* target.c (initialize_targets, show_targetdebug)
(show_trust_readonly): Ditto.
* symfile.c (_initialize_symfile, show_symbol_reloading)
(show_ext_args, show_download_write_size)
(show_debug_file_directory): Ditto.
* source.c (_initialize_source, show_lines_to_list): Ditto.
* solib.c (_initialize_solib, show_auto_solib_add)
(show_solib_search_path): Ditto.
* p-valprint.c (_initialize_pascal_valprint)
(show_pascal_static_field_print): Ditto.
* printcmd.c (_initialize_printcmd, show_max_symbolic_offset)
(show_print_symbol_filename): Add and update.
* parse.c (_initialize_parse, show_expressiondebug): Dito.
* observer.c (_initialize_observer, show_observer_debug): Dito.
* maint.c (_initialize_maint_cmds, show_watchdog)
(show_maintenance_profile_p): Dito.
* linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito.
* infrun.c (_initialize_infrun, show_debug_infrun)
(show_stop_on_solib_events, show_follow_fork_mode_string)
(show_scheduler_mode, show_step_stop_if_no_debug): Ditto.
* infcall.c (_initialize_infcall, show_coerce_float_to_double_p)
(show_unwind_on_signal_p): Ditto.
* gdbtypes.c (build_gdbtypes, show_opaque_type_resolution)
(_initialize_gdbtypes, show_overload_debug): Ditto.
* gdb-events.c, gdb-events.sh (_initialize_gdb_events)
(show_gdb_events_debug): Ditto.
* gdbarch.c, gdbarch.sh (show_gdbarch_debug)
(_initialize_gdbarch): Ditto.
* frame.c (_initialize_frame, show_backtrace_past_main)
(show_backtrace_past_entry, show_backtrace_limit)
(show_frame_debug): Ditto.
* exec.c (_initialize_exec, show_write_files): Ditto.
* dwarf2read.c (_initialize_dwarf2_read)
(show_dwarf2_max_cache_age): Ditto.
* demangle.c (_initialize_demangler)
(show_demangling_style_names): Ditto.
* dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto.
* cp-valprint.c (show_static_field_print)
(_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto.
* corefile.c (_initialize_core, show_gnutarget_string): Ditto.
* cli/cli-logging.c (_initialize_cli_logging)
(show_logging_overwrite, show_logging_redirect)
(show_logging_filename): Ditto.
* cli/cli-cmds.c (show_info_verbose, show_history_expansion_p)
(init_cli_cmds, show_baud_rate, show_remote_debug)
(show_remote_timeout, show_max_user_call_depth): Ditto.
* charset.c (show_host_charset_name, show_target_charset_name)
(initialize_charset): Ditto.
* breakpoint.c (show_can_use_hw_watchpoints)
(show_pending_break_support, _initialize_breakpoint): Ditto.
|
|
Use add_setshow_enum_cmd through out.
* arch-utils.c, charset.c, demangle.c, i386-tdep.c: Update.
* infrun.c, mips-tdep.c, osabi.c, serial.c, tui/tui-win.c: Update.
|
|
Mark up add_com, add_info and add_prefix_cmd.
* breakpoint.c, cp-support.c, dcache.c, dwarf2read.c: Update.
* exec.c, f-valprint.c, frame.c, gcore.c, gnu-nat.c: Update.
* go32-nat.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update.
* kod.c, language.c, linux-nat.c, m32r-rom.c, macrocmd.c: Update.
* maint.c, memattr.c, mips-tdep.c, nto-procfs.c, objc-lang.c: Update.
* ocd.c, pa64solib.c, printcmd.c, procfs.c, regcache.c: Update.
* remote-e7000.c, remote-m32r-sdi.c, remote-mips.c: Update.
* remote-sds.c, remote-sim.c, remote-st.c, remote-utils.c: Update.
* remote.c, rs6000-tdep.c, ser-go32.c, serial.c: Update.
* sh-tdep.c, solib.c, somsolib.c, source.c, stack.c: Update.
* symfile.c, symtab.c, target.c, thread.c, top.c: Update.
* tracepoint.c, typeprint.c, utils.c, valprint.c: Update.
* win32-nat.c, xcoffsolib.c, cli/cli-cmds.c, cli/cli-dump.c: Update.
* cli/cli-logging.c, tui/tui-layout.c, tui/tui-regs.c: Update.
* tui/tui-stack.c, tui/tui-win.c: Update.
|
|
Mark up add_cmd.
* arch-utils.c, avr-tdep.c, breakpoint.c, corefile.c: Update.
* cp-abi.c, cp-namespace.c, cp-support.c, dummy-frame.c: Update.
* exec.c, gnu-nat.c, go32-nat.c, hppa-tdep.c, infcmd.c: Update.
* infrun.c, interps.c, macrocmd.c, maint.c, memattr.c: Update.
* mips-tdep.c, ocd.c, osabi.c, printcmd.c, regcache.c: Update.
* reggroups.c, remote-fileio.c, remote-rdi.c, remote.c: Update.
* sol-thread.c, source.c, stack.c, symfile-mem.c: Update.
* symfile.c, thread.c, tracepoint.c, valprint.c, value.c: Update.
* win32-nat.c, cli/cli-cmds.c, cli/cli-dump.c: Update.
* cli/cli-logging.c, tui/tui-regs.c: Update.
|
|
* utils.c (paddress): New function.
* defs.h (paddress): Declare.
* printcmd.c (deprecated_print_address_numeric): Rename
print_address_numeric, call paddress.
* valprint.c, ui-out.c, tui/tui-stack.c, tracepoint.c: Update.
* symmisc.c, symfile.c stack.c, p-valprint.c, printcmd.c: Update.
* maint.c, m32r-rom.c, infcmd.c, f-valprint.c, exec.c: Update.
* dwarf2read.c, dve3900-rom.c, defs.h, c-valprint.c: Update.
* corefile.c, cli/cli-cmds.c, breakpoint.c, annotate.c: Update.
* ada-valprint.c: Update.
|
