| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
gdb.base/watchpoint.exp has a test below which expects to see "Cannot
access memory at address 0x0" when a null pointer is dereferenced.
gdb_test "watch -location nullptr->p->x" \
"Cannot access memory at address 0x0"
This assumption is not true when the target is no-mmu, so we get
watch -location nullptr->p->x
Hardware watchpoint 28: -location nullptr->p->x
(gdb) FAIL: gdb.base/watchpoint.exp: watch -location nullptr->p->x
This patch is to check whether null pointer can be dereferenced first
and then do the test.
gdb/testsuite:
2014-06-01 Yao Qi <yao@codesourcery.com>
* gdb.base/watchpoint.exp (test_watch_location): Check null
pointer can be dereferenced. If not, do the test, otherwise
skip it.
|
|
Say the program is stopped at a breakpoint, and the user sets a
watchpoint. When the program is next resumed, GDB will first step
over the breakpoint, as explained in the manual:
@value {GDBN} normally ignores breakpoints when it resumes
execution, until at least one instruction has been executed. If it
it did not do this, you would be unable to proceed past a breakpoint
without first disabling the breakpoint. This rule applies whether
or not the breakpoint already existed when your program stopped.
However, GDB currently also removes watchpoints, catchpoints, etc.,
and that means that the first instruction off the breakpoint does not
trigger the watchpoint, catchpoint, etc.
testsuite/gdb.base/watchpoint.exp has a kfail for this.
The PR proposes installing watchpoints only when stepping over a
breakpoint, but that misses catchpoints, etc.
A better fix would instead work from the opposite direction -- remove
only real breakpoints, leaving all other kinds of breakpoints
inserted.
But, going further, it's really a waste to constantly remove/insert
all breakpoints when stepping over a single breakpoint (generating a
pair of RSP z/Z packets for each breakpoint), so the fix goes a step
further and makes GDB remove _only_ the breakpoint being stepped over,
leaving all others installed. This then has the added benefit of
reducing breakpoint-related RSP traffic substancialy when there are
many breakpoints set.
gdb/
2014-03-20 Pedro Alves <palves@redhat.com>
PR breakpoints/7143
* breakpoint.c (should_be_inserted): Don't insert breakpoints that
are being stepped over.
(breakpoint_address_match): Make extern.
* breakpoint.h (breakpoint_address_match): New declaration.
* inferior.h (stepping_past_instruction_at): New declaration.
* infrun.c (struct step_over_info): New type.
(step_over_info): New global.
(set_step_over_info, clear_step_over_info)
(stepping_past_instruction_at): New functions.
(handle_inferior_event): Clear the step-over info when
trap_expected is cleared.
(resume): Remove now stale comment.
(clear_proceed_status): Clear step-over info.
(proceed): Adjust step-over handling to set or clear the step-over
info instead of removing all breakpoints.
(handle_signal_stop): When setting up a thread-hop, don't remove
breakpoints here.
(stop_stepping): Clear step-over info.
(keep_going): Adjust step-over handling to set or clear step-over
info and then always inserting breakpoints, instead of removing
all breakpoints when stepping over one.
gdb/testsuite/
2014-03-20 Pedro Alves <palves@redhat.com>
PR breakpoints/7143
* gdb.base/watchpoint.exp: Mention bugzilla bug number instead of
old gnats gdb/38. Remove kfail. Adjust to use gdb_test instead
of gdb_test_multiple.
* gdb.cp/annota2.exp: Remove kfail for gdb/38.
* gdb.cp/annota3.exp: Remove kfail for gdb/38.
|
|
|
|
https://sourceware.org/ml/gdb-patches/2013-10/msg00551.html
gdb/ChangeLog
* breakpoint.c (update_watchpoint): Update error message and add
an additional error message.
gdb/testsuite/ChangeLog
* gdb.base/watchpoint.exp (test_no_hw_watchpoints): Add additional
tests and update expected error message.
(test_watch_register_location): New tests.
(do_tests): Call test_watch_register_location.
* gdb.base/watchpoints.exp: Update expected error message.
|
|
This patch fixes PR symtab/15719.
The bug is that "watch -location" crashes on a certain expression.
The problem is that fetch_subexp_value is catching an exception.
For ordinary watchpoints this is ok; but for location watchpoints,
it is better for the exception to propagate.
Built and regtested on x86-64 Fedora 18.
New test case included.
PR symtab/15719:
* breakpoint.c (update_watchpoint, watchpoint_check)
(watch_command_1): Update.
* eval.c (fetch_subexp_value): Add "preserve_errors"
parameter.
* ppc-linux-nat.c (check_condition): Update.
* value.h (fetch_subexp_value): Update.
* gdb.base/watchpoint.c (struct foo5): New.
(nullptr): New global.
* gdb.base/watchpoint.exp (test_watch_location): Add test.
|
|
Convert files gdb.base/[t-z]*.exp to use standard_output_file et al.
* gdb.base/testenv.exp, gdb.base/tui-layout.exp,
gdb.base/twice.exp, gdb.base/type-opaque.exp, gdb.base/unload.exp,
gdb.base/unwindonsignal.exp, gdb.base/valgrind-db-attach.exp,
gdb.base/valgrind-infcall.exp, gdb.base/value-double-free.exp,
gdb.base/varargs.exp, gdb.base/watch-cond-infcall.exp,
gdb.base/watch-cond.exp, gdb.base/watch-non-mem.exp,
gdb.base/watch-read.exp, gdb.base/watch-vfork.exp,
gdb.base/watch_thread_num.exp, gdb.base/watchpoint-cond-gone.exp,
gdb.base/watchpoint-delete.exp, gdb.base/watchpoint-hw.exp,
gdb.base/watchpoint-solib.exp, gdb.base/watchpoint.exp,
gdb.base/watchpoints.exp, gdb.base/wchar.exp, gdb.base/whatis.exp:
Use standard_testfile, standard_output_file, prepare_for_testing,
clean_restart.
|
|
A few months ago semicolons after "return" were removed throughout the
testsuite. However, as I pointed out in review, they're unnecessary
not just after "return", but pretty much after any tcl command. ';'
is the command separator, and you only need it if there's another
command on the same line afterwards.
This patch was written by running:
$ find . -name "*.exp" | xargs grep -l ";\s*$" | xargs sed -i 's/\([^#][^\s*;]*\)\s*;\s*$/\1/'
and then undoing changes to comments, and lib/future.exp.
Tested on x86_64 Fedora 17.
gdb/testsuite/
2013-06-07 Pedro Alves <palves@redhat.com>
* boards/native-extended-gdbserver.exp: Remove semicolon.
* config/arm-ice.exp: Likewise.
* config/bfin.exp: Likewise.
* config/cygmon.exp: Likewise.
* config/h8300.exp: Likewise.
* config/monitor.exp: Likewise.
* config/sid.exp: Likewise.
* config/sim.exp: Likewise.
* config/slite.exp: Likewise.
* config/vx.exp: Likewise.
* gdb.arch/i386-bp_permanent.exp: Likewise.
* gdb.asm/asm-source.exp: Likewise.
* gdb.base/args.exp: Likewise.
* gdb.base/attach-pie-misread.exp: Likewise.
* gdb.base/auxv.exp: Likewise.
* gdb.base/bigcore.exp: Likewise.
* gdb.base/bitfields2.exp: Likewise.
* gdb.base/bitfields.exp: Likewise.
* gdb.base/break.exp: Likewise.
* gdb.base/break-interp.exp: Likewise.
* gdb.base/callfuncs.exp: Likewise.
* gdb.base/call-sc.exp: Likewise.
* gdb.base/commands.exp: Likewise.
* gdb.base/corefile.exp: Likewise.
* gdb.base/dbx.exp: Likewise.
* gdb.base/ending-run.exp: Likewise.
* gdb.base/exprs.exp: Likewise.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/huge.exp: Likewise.
* gdb.base/list.exp: Likewise.
* gdb.base/memattr.exp: Likewise.
* gdb.base/overlays.exp: Likewise.
* gdb.base/printcmds.exp: Likewise.
* gdb.base/recurse.exp: Likewise.
* gdb.base/remotetimeout.exp: Likewise.
* gdb.base/reread.exp: Likewise.
* gdb.base/savedregs.exp: Likewise.
* gdb.base/scope.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/setshow.exp: Likewise.
* gdb.base/setvar.exp: Likewise.
* gdb.base/sigaltstack.exp: Likewise.
* gdb.base/siginfo-addr.exp: Likewise.
* gdb.base/siginfo.exp: Likewise.
* gdb.base/siginfo-obj.exp: Likewise.
* gdb.base/sigrepeat.exp: Likewise.
* gdb.base/sigstep.exp: Likewise.
* gdb.base/structs.exp: Likewise.
* gdb.base/testenv.exp: Likewise.
* gdb.base/twice.exp: Likewise.
* gdb.base/valgrind-db-attach.exp: Likewise.
* gdb.base/valgrind-infcall.exp: Likewise.
* gdb.base/varargs.exp: Likewise.
* gdb.base/watchpoint.exp: Likewise.
* gdb.cp/gdb1355.exp: Likewise.
* gdb.cp/misc.exp: Likewise.
* gdb.disasm/hppa.exp: Likewise.
* gdb.disasm/t01_mov.exp: Likewise.
* gdb.disasm/t02_mova.exp: Likewise.
* gdb.disasm/t03_add.exp: Likewise.
* gdb.disasm/t04_sub.exp: Likewise.
* gdb.disasm/t05_cmp.exp: Likewise.
* gdb.disasm/t06_ari2.exp: Likewise.
* gdb.disasm/t07_ari3.exp: Likewise.
* gdb.disasm/t08_or.exp: Likewise.
* gdb.disasm/t09_xor.exp: Likewise.
* gdb.disasm/t10_and.exp: Likewise.
* gdb.disasm/t11_logs.exp: Likewise.
* gdb.disasm/t12_bit.exp: Likewise.
* gdb.disasm/t13_otr.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.mi/mi-reverse.exp: Likewise.
* gdb.pascal/floats.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.threads/attach-into-signal.exp: Likewise.
* gdb.threads/pthreads.exp: Likewise.
* gdb.threads/thread_events.exp: Likewise.
* gdb.threads/watchthreads.exp: Likewise.
* gdb.trace/actions-changed.exp: Likewise.
* gdb.trace/actions.exp: Likewise.
* gdb.trace/ax.exp: Likewise.
* gdb.trace/backtrace.exp: Likewise.
* gdb.trace/change-loc.exp: Likewise.
* gdb.trace/deltrace.exp: Likewise.
* gdb.trace/disconnected-tracing.exp: Likewise.
* gdb.trace/ftrace.exp: Likewise.
* gdb.trace/infotrace.exp: Likewise.
* gdb.trace/passc-dyn.exp: Likewise.
* gdb.trace/passcount.exp: Likewise.
* gdb.trace/pending.exp: Likewise.
* gdb.trace/qtro.exp: Likewise.
* gdb.trace/range-stepping.exp: Likewise.
* gdb.trace/report.exp: Likewise.
* gdb.trace/save-trace.exp: Likewise.
* gdb.trace/status-stop.exp: Likewise.
* gdb.trace/strace.exp: Likewise.
* gdb.trace/tfile.exp: Likewise.
* gdb.trace/tfind.exp: Likewise.
* gdb.trace/trace-break.exp: Likewise.
* gdb.trace/tracecmd.exp: Likewise.
* gdb.trace/trace-mt.exp: Likewise.
* gdb.trace/tspeed.exp: Likewise.
* gdb.trace/tsv.exp: Likewise.
* gdb.trace/while-stepping.exp: Likewise.
* lib/gdb.exp: Likewise.
* lib/gdbserver-support.exp: Likewise.
* lib/java.exp: Likewise.
* lib/mi-support.exp: Likewise.
* lib/pascal.exp: Likewise.
* lib/prompt.exp: Likewise.
* lib/trace-support.exp: Likewise.
|
|
* config/monitor.exp (gdb_target_cmd): Remove semicolon after
'return'.
(gdb_target_monitor, gdb_load): Likewise.
* config/sid.exp (gdb_load): Likewise.
* config/slite.exp (gdb_load): Likewise.
* config/vx.exp (gdb_start, spawn_vxgdb): Likewise.
* gdb.ada/arrayidx.exp, gdb.ada/null_array.exp: Likewise.
* gdb.arch/mips-octeon-bbit.exp (single_step): Likewise.
(single_step_until): Likewise.
* gdb.arch/powerpc-d128-regs.exp: Likewise.
* gdb.arch/system-gcore.exp: Likewise.
* gdb.base/bigcore.exp (extract_heap): Likewise.
* gdb.base/break-on-linker-gcd-function.exp: Likewise.
* gdb.base/call-ar-st.exp: Likewise.
* gdb.base/call-rt-st.exp: Likewise.
* gdb.base/call-sc.exp, gdb.base/call-strs.exp: Likewise.
* gdb.base/callfuncs.exp, gdb.base/completion.exp: Likewise.
* gdb.base/condbreak.exp, gdb.base/constvars.exp: Likewise.
* gdb.base/corefile.exp: Likewise.
* gdb.base/dbx.exp (gdb_file_cmd): Likewise.
* gdb.base/exprs.exp, gdb.base/fileio.exp: Likewise.
* gdb.base/fixsection.exp: Likewise.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/gcore-buffer-overflow.exp: Likewise.
* gdb.base/gcore-relro.exp: Likewise.
* gdb.base/gcore.exp, gdb.base/gdb11530.exp: Likewise.
* gdb.base/gdb11531.exp, gdb.base/gnu-ifunc.exp: Likewise.
* gdb.base/info-os.exp, gdb.base/info-proc.exp: Likewise.
* gdb.base/interp.exp, gdb.base/langs.exp:: Likewise.
* gdb.base/list.exp: Likewise.
(set_listsize): Likewise.
* gdb.base/logical.exp, gdb.base/mips_pro.exp: Likewise.
* gdb.base/miscexprs.exp, gdb.base/nodebug.exp: Likewise.
* gdb.base/opaque.exp, gdb.base/pointers.exp: Likewise.
* gdb.base/psymtab.exp, gdb.base/ptype.exp: Likewise.
* gdb.base/relational.exp, gdb.base/scope.exp: Likewise.
* gdb.base/setvar.exp: Likewise.
(test_set): Likewise.
* gdb.base/signals.exp, gdb.base/sizeof.exp: Likewise.
* gdb.base/solib-overlap.exp: Likewise.
* gdb.base/store.exp, gdb.base/structs.exp: Likewise.
* gdb.base/structs2.exp, gdb.base/volatile.exp: Likewise.
* gdb.base/watchpoint.exp (initialize): Likewise.
(test_simple_watchpoint): Likewise.
(test_disabling_watchpoints): Likewise.
(test_watchpoint_triggered_in_syscall): Likewise.
* gdb.base/whatis.exp, gdb.cp/ambiguous.exp: Likewise.
* gdb.cp/casts.exp, gdb.cp/ctti.exp: Likewise.
* gdb.cp/namespace.exp, gdb.cp/nsdecl.exp: Likewise.
* gdb.cp/psmang.exp, gdb.dwarf2/dw2-ranges.exp: Likewise.
* gdb.hp/gdb.aCC/optimize.exp: Likewise.
* gdb.hp/gdb.aCC/watch-cmd.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.hp/gdb.base-hp/pxdb.exp: Likewise.
* gdb.hp/gdb.compat/xdb1.exp: Likewise.
* gdb.hp/gdb.compat/xdb2.exp: Likewise.
* gdb.hp/gdb.compat/xdb3.exp: Likewise.
* gdb.hp/gdb.defects/bs14602.exp: Likewise.
* gdb.hp/gdb.defects/solib-d.exp: Likewise.
* gdb.mi/gdb792.exp: Likewise.
* gdb.mi/mi-inheritance-syntax-error.exp: Likewise.
* gdb.mi/mi-logging.exp, gdb.mi/mi-var-cp.exp : Likewise.
* gdb.mi/mi-var-rtti.exp, gdb.python/py-type.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
(load_core): Likewise.
* gdb.threads/pthreads.exp (all_threads_running): Likewise.
(test_startup, check_control_c): Likewise.
* gdb.threads/sigstep-threads.exp: Likewise.
* gdb.threads/thread_check.exp: Likewise.
* gdb.trace/backtrace.exp, gdb.trace/change-loc.exp: Likewise.
* gdb.trace/circ.exp (run_trace_experiment): Likewise.
(set_a_tracepoint, trace_buffer_normal): Likewise.
(gdb_trace_circular_tests): Likewise.
* gdb.trace/collection.exp: Likewise.
* gdb.trace/disconnected-tracing.exp: Likewise.
* gdb.trace/infotrace.exp: Likewise.
* gdb.trace/mi-traceframe-changed.exp: Likewise.
* gdb.trace/mi-tracepoint-changed.exp: Likewise.
* gdb.trace/mi-tsv-changed.exp (test_create_delete_modify_tsv): Likewise.
* gdb.trace/packetlen.exp, gdb.trace/passc-dyn.exp: Likewise.
* gdb.trace/pending.exp, gdb.trace/report.exp: Likewise.
* gdb.trace/stap-trace.exp: Likewise.
* gdb.trace/status-stop.exp,gdb.trace/strace.exp: Likewise.
* gdb.trace/tfind.exp, gdb.trace/trace-break.exp: Likewise.
* gdb.trace/trace-buffer-size.exp: Likewise.
* gdb.trace/tspeed.exp, gdb.trace/tsv.exp: Likewise.
* gdb.trace/unavailable.exp: Likewise.
* gdb.trace/while-dyn.exp: Likewise.
* lib/fortran.exp (set_lang_fortran): Likewise.
* lib/gdb.exp (default_gdb_version, gdb_start_cmd): Likewise.
(gdb_breakpoint, gdb_reinitialize_dir): Likewise.
(default_gdb_start, get_compiler_info): Likewise.
(gdb_compile, gdb_compile_objc, gdb_reload, gdb_init): Likewise.
(get_debug_format, setup_xfail_format): Likewise.
(rerun_to_main, gdb_skip_float_test): Likewise.
(build_id_debug_filename_get, get_remotetimeout): Likewise.
* lib/java.exp (set_lang_java): Likewise.
* lib/mi-support.exp (default_mi_gdb_start): Likewise.
(mi_gdb_reinitialize_dir, mi_gdb_target_cmd): Likewise.
(mi_gdb_file_cmd, mi_gdb_test): Likewise.
(mi_run_cmd_full, mi_expect_interrupt): Likewise.
* lib/objc.exp (set_lang_objc): Likewise.
* lib/pascal.exp (set_lang_pascal): Likewise.
* lib/prompt.exp (default_prompt_gdb_start): Likewise.
* lib/trace-support.exp (gdb_trace_setactions, gdb_tfind_test): Likewise.
(gdb_readexpr, gdb_gettpnum, gdb_find_recursion_test_baseline): Likewise.
|
|
both condition and thread. Then delete the watchpoint.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
Do not false FAIL with old GCCs.
* gdb.base/watchpoint.exp (self-delete local watch) <$no_hw>: XFAIL for
GCC < 4.5 in $no_hw mode.
|
|
marker comment at the beginning (after intialization).
* gdb.base/watchpoint.exp (test_complex_watchpoint): Set func2
breakpoint on marker comment instead of function begin.
(test_wide_location_1): Do not expect HW watchpoints on 32-bit
PowerPC.
(test_wide_location_2): Do not expect HW watchpoints on 32-bit
or 64-bit PowerPC.
(do_tests): Consistently set can-use-hw-watchpoints to 0 if
gdb,no_hardware_watchpoints flag is set.
(initialize): Remove now redundant can-use-hw-watchpoints change.
|
|
* linux-arm-low.c (arm_linux_hw_point_initialize): Distinguish
between unsupported TYPE and unimplementable ADDR/LEN combination.
(arm_insert_point): Act on new return value.
testsuite/ChangeLog:
* gdb.base/watchpoint.exp (test_wide_location_1): Expect software
watchpoints on ARM. When expecting software watchpoints, tolerate
(remote) targets that report unsupported hardware watchpoint only
at continue time.
(test_wide_location_2): Likewise.
|
|
(build_executable): Update.
(get_compiler_info): Remove 'binfile' argument.
* gdb.ada/arrayidx.exp: Update.
* gdb.ada/null_array.exp: Update.
* gdb.arch/altivec-abi.exp: Update.
* gdb.arch/altivec-regs.exp: Update.
* gdb.arch/amd64-byte.exp: Update.
* gdb.arch/amd64-dword.exp: Update.
* gdb.arch/amd64-word.exp: Update.
* gdb.arch/i386-avx.exp: Update.
* gdb.arch/i386-byte.exp: Update.
* gdb.arch/i386-sse.exp: Update.
* gdb.arch/i386-word.exp: Update.
* gdb.arch/ppc-dfp.exp: Update.
* gdb.arch/ppc-fp.exp: Update.
* gdb.arch/vsx-regs.exp: Update.
* gdb.base/all-bin.exp: Update.
* gdb.base/annota1.exp: Update.
* gdb.base/async.exp: Update.
* gdb.base/attach.exp: Update.
* gdb.base/break-interp.exp: Update.
* gdb.base/call-ar-st.exp: Update.
* gdb.base/call-rt-st.exp: Update.
* gdb.base/call-sc.exp: Update.
* gdb.base/callfuncs.exp: Update.
* gdb.base/catch-load.exp: Update.
* gdb.base/completion.exp: Update.
* gdb.base/complex.exp: Update.
* gdb.base/condbreak.exp: Update.
* gdb.base/consecutive.exp: Update.
* gdb.base/constvars.exp: Update.
* gdb.base/corefile.exp: Update.
* gdb.base/eval-skip.exp: Update.
* gdb.base/expand-psymtabs.exp: Update.
* gdb.base/exprs.exp: Update.
* gdb.base/fileio.exp: Update.
* gdb.base/fixsection.exp: Update.
* gdb.base/funcargs.exp: Update.
* gdb.base/gdb11530.exp: Update.
* gdb.base/gdb1555.exp: Update.
* gdb.base/gnu-ifunc.exp: Update.
* gdb.base/gnu_vector.exp: Update.
* gdb.base/info-macros.exp: Update.
* gdb.base/jit-simple.exp: Update.
* gdb.base/jit-so.exp: Update.
* gdb.base/jit.exp: Update.
* gdb.base/langs.exp: Update.
* gdb.base/list.exp: Update.
* gdb.base/logical.exp: Update.
* gdb.base/long_long.exp: Update.
* gdb.base/longjmp.exp: Update.
* gdb.base/macscp.exp: Update.
* gdb.base/mips_pro.exp: Update.
* gdb.base/miscexprs.exp: Update.
* gdb.base/morestack.exp: Update.
* gdb.base/nodebug.exp: Update.
* gdb.base/opaque.exp: Update.
* gdb.base/pc-fp.exp: Update.
* gdb.base/pending.exp: Update.
* gdb.base/permissions.exp: Update.
* gdb.base/pointers.exp: Update.
* gdb.base/prelink.exp: Update.
* gdb.base/printcmds.exp: Update.
* gdb.base/psymtab.exp: Update.
* gdb.base/ptype.exp: Update.
* gdb.base/relational.exp: Update.
* gdb.base/scope.exp: Update.
* gdb.base/setvar.exp: Update.
* gdb.base/shlib-call.exp: Update.
* gdb.base/shreloc.exp: Update.
* gdb.base/signals.exp: Update.
* gdb.base/sizeof.exp: Update.
* gdb.base/so-impl-ld.exp: Update.
* gdb.base/so-indr-cl.exp: Update.
* gdb.base/solib-disc.exp: Update.
* gdb.base/solib-display.exp: Update.
* gdb.base/solib-nodir.exp: Update.
* gdb.base/solib-overlap.exp: Update.
* gdb.base/solib-symbol.exp: Update.
* gdb.base/solib-weak.exp: Update.
* gdb.base/solib.exp: Update.
* gdb.base/store.exp: Update.
* gdb.base/structs.exp: Update.
* gdb.base/structs2.exp: Update.
* gdb.base/type-opaque.exp: Update.
* gdb.base/unload.exp: Update.
* gdb.base/varargs.exp: Update.
* gdb.base/volatile.exp: Update.
* gdb.base/watch_thread_num.exp: Update.
* gdb.base/watchpoint-solib.exp: Update.
* gdb.base/watchpoint.exp: Update.
* gdb.base/watchpoints.exp: Update.
* gdb.base/whatis.exp: Update.
* gdb.cell/arch.exp: Update.
* gdb.cell/break.exp: Update.
* gdb.cell/bt.exp: Update.
* gdb.cell/core.exp: Update.
* gdb.cell/data.exp: Update.
* gdb.cell/ea-cache.exp: Update.
* gdb.cell/f-regs.exp: Update.
* gdb.cell/fork.exp: Update.
* gdb.cell/gcore.exp: Update.
* gdb.cell/mem-access.exp: Update.
* gdb.cell/ptype.exp: Update.
* gdb.cell/registers.exp: Update.
* gdb.cell/sizeof.exp: Update.
* gdb.cell/solib-symbol.exp: Update.
* gdb.cell/solib.exp: Update.
* gdb.cp/ambiguous.exp: Update.
* gdb.cp/breakpoint.exp: Update.
* gdb.cp/bs15503.exp: Update.
* gdb.cp/casts.exp: Update.
* gdb.cp/class2.exp: Update.
* gdb.cp/cpexprs.exp: Update.
* gdb.cp/cplusfuncs.exp: Update.
* gdb.cp/ctti.exp: Update.
* gdb.cp/dispcxx.exp: Update.
* gdb.cp/gdb1355.exp: Update.
* gdb.cp/gdb2384.exp: Update.
* gdb.cp/gdb2495.exp: Update.
* gdb.cp/infcall-dlopen.exp: Update.
* gdb.cp/local.exp: Update.
* gdb.cp/m-data.exp: Update.
* gdb.cp/m-static.exp: Update.
* gdb.cp/mb-ctor.exp: Update.
* gdb.cp/mb-inline.exp: Update.
* gdb.cp/mb-templates.exp: Update.
* gdb.cp/member-ptr.exp: Update.
* gdb.cp/method.exp: Update.
* gdb.cp/namespace.exp: Update.
* gdb.cp/nextoverthrow.exp: Update.
* gdb.cp/nsdecl.exp: Update.
* gdb.cp/nsrecurs.exp: Update.
* gdb.cp/nsstress.exp: Update.
* gdb.cp/nsusing.exp: Update.
* gdb.cp/pr-1023.exp: Update.
* gdb.cp/pr-1210.exp: Update.
* gdb.cp/pr-574.exp: Update.
* gdb.cp/pr9631.exp: Update.
* gdb.cp/printmethod.exp: Update.
* gdb.cp/psmang.exp: Update.
* gdb.cp/re-set-overloaded.exp: Update.
* gdb.cp/rtti.exp: Update.
* gdb.cp/shadow.exp: Update.
* gdb.cp/templates.exp: Update.
* gdb.cp/try_catch.exp: Update.
* gdb.dwarf2/dw2-ranges.exp: Update.
* gdb.dwarf2/pr10770.exp: Update.
* gdb.fortran/library-module.exp: Update.
* gdb.hp/gdb.aCC/optimize.exp: Update.
* gdb.hp/gdb.aCC/watch-cmd.exp: Update.
* gdb.hp/gdb.base-hp/callfwmall.exp: Update.
* gdb.hp/gdb.base-hp/hwwatchbus.exp: Update.
* gdb.hp/gdb.base-hp/pxdb.exp: Update.
* gdb.hp/gdb.base-hp/sized-enum.exp: Update.
* gdb.hp/gdb.base-hp/so-thresh.exp: Update.
* gdb.hp/gdb.compat/xdb1.exp: Update.
* gdb.hp/gdb.compat/xdb2.exp: Update.
* gdb.hp/gdb.compat/xdb3.exp: Update.
* gdb.hp/gdb.defects/bs14602.exp: Update.
* gdb.hp/gdb.defects/solib-d.exp: Update.
* gdb.hp/gdb.objdbg/objdbg01.exp: Update.
* gdb.hp/gdb.objdbg/objdbg02.exp: Update.
* gdb.hp/gdb.objdbg/objdbg03.exp: Update.
* gdb.hp/gdb.objdbg/objdbg04.exp: Update.
* gdb.mi/gdb792.exp: Update.
* gdb.mi/mi-pending.exp: Update.
* gdb.mi/mi-solib.exp: Update.
* gdb.mi/mi-var-cp.exp: Update.
* gdb.opt/clobbered-registers-O2.exp: Update.
* gdb.opt/inline-bt.exp: Update.
* gdb.opt/inline-cmds.exp: Update.
* gdb.opt/inline-locals.exp: Update.
* gdb.python/py-events.exp: Update.
* gdb.python/py-finish-breakpoint.exp: Update.
* gdb.python/py-type.exp: Update.
* gdb.reverse/solib-precsave.exp: Update.
* gdb.reverse/solib-reverse.exp: Update.
* gdb.server/solib-list.exp: Update.
* gdb.stabs/weird.exp: Update.
* gdb.threads/attach-into-signal.exp: Update.
* gdb.threads/attach-stopped.exp: Update.
* gdb.threads/tls-shared.exp: Update.
* gdb.trace/change-loc.exp: Update.
* gdb.trace/strace.exp: Update.
|
|
2012-02-22 Sterling Augustine <saugustine@google.com>
PR 13689:
* breakpoint.c (watchpoint_exp_is_constant): Add UNOP_CAST to switch.
testsuite/ChangeLog
2012-02-22 Sterling Augustine <saugustine@google.com>
* gdb.base/watchpoint.exp (test_constant_watchpoint): Add test for
constant with cast.
|
|
* gdb.arch/altivec-abi.exp (altivec_abi_tests): Don't do
with_test_prefix here.
(top level): Do it here instead. Remove `:' from the
with_test_prefix string.
* gdb.base/attach-pie-misread.exp: Remove the leading space the
the suffix `:' from the with_test_prefix prefix string.
* gdb.base/break-interp.exp: Ditto.
* gdb.base/catch-load.exp: Ditto.
* gdb.base/disp-step-syscall.exp: Ditto.
* gdb.base/jit-so.exp: Ditto.
* gdb.base/jit.exp: Ditto.
* gdb.base/sepdebug.exp: Ditto.
* gdb.base/solib-display.exp: Ditto.
* gdb.base/solib-overlap.exp: Ditto.
* gdb.base/watch-cond-infcall.exp: Ditto.
* gdb.base/watchpoint.exp: Ditto.
* gdb.dwarf2/dw2-noloc.exp: Ditto.
* gdb.mi/mi-watch.exp: Ditto.
* gdb.mi/mi2-watch.exp: Ditto.
* gdb.threads/non-ldr-exc-1.exp: Ditto.
* gdb.threads/non-ldr-exc-2.exp: Ditto.
* gdb.threads/non-ldr-exc-3.exp: Ditto.
* gdb.threads/non-ldr-exc-4.exp: Ditto.
* gdb.threads/watchpoint-fork.exp: Ditto.
* gdb.threads/watchthreads-reorder.exp: Ditto.
* gdb.trace/change-loc.exp: Ditto.
* gdb.trace/pending.exp: Ditto.
* gdb.trace/status-stop.exp: Ditto.
* gdb.trace/strace.exp: Ditto.
* gdb.trace/trace-break.exp: Ditto.
* gdb.trace/unavailable.exp: Ditto.
* lib/gdb.exp (with_test_prefix): Always prefix with space and
suffix with colon. Adjust leading comments.
|
|
Tom Tromey <tromey@redhat.com>
* lib/gdb.exp: Add description of test prefixes.
(with_test_prefix): New procedure.
* gdb.arch/altivec-abi.exp: Use with_test_prefix.
* gdb.base/attach-pie-misread.exp: Use with_test_prefix.
* gdb.base/break-interp.exp: Use with_test_prefix. Use append
instead of lappend to append to pf_prefix.
* gdb.base/catch-load.exp: Use with_test_prefix.
* gdb.base/disp-step-syscall.exp: Use with_test_prefix.
* gdb.base/jit-so.exp: Use with_test_prefix.
* gdb.base/jit.exp: Use with_test_prefix.
* gdb.base/return-nodebug.exp (do_test): Use append instead of
lappend to append to pf_prefix.
* gdb.base/sepdebug.exp: Use with_test_prefix.
* gdb.base/solib-display.exp: Use with_test_prefix.
* gdb.base/solib-overlap.exp: Use with_test_prefix.
* gdb.base/watch-cond-infcall.exp: Use with_test_prefix.
* gdb.base/watchpoint.exp: Use with_test_prefix.
* gdb.dwarf2/dw2-noloc.exp: Use with_test_prefix.
* gdb.mi/mi-watch.exp: Use with_test_prefix.
* gdb.mi/mi2-watch.exp: Use with_test_prefix.
* gdb.threads/non-ldr-exc-1.exp: Use with_test_prefix.
* gdb.threads/non-ldr-exc-2.exp: Use with_test_prefix.
* gdb.threads/non-ldr-exc-3.exp: Use with_test_prefix.
* gdb.threads/non-ldr-exc-4.exp: Use with_test_prefix.
* gdb.threads/watchpoint-fork.exp: Use with_test_prefix. Use
append instead of lappend to append to pf_prefix.
* gdb.threads/watchthreads-reorder.exp: Use with_test_prefix.
* gdb.trace/change-loc.exp: Use with_test_prefix.
* gdb.trace/pending.exp: Use with_test_prefix.
* gdb.trace/status-stop.exp: Use with_test_prefix.
* gdb.trace/strace.exp: Use with_test_prefix.
* gdb.trace/trace-break.exp: Use with_test_prefix.
* gdb.trace/unavailable.exp: Use with_test_prefix. Use append
instead of lappend to append to pf_prefix.
|
|
2012-02-13 Pedro Alves <palves@redhat.com>
* gdb.texinfo (MIPS boards): Refer to mips-elf instead of
mips-idt-ecoff.
gdb/testsuite/
2012-02-13 Pedro Alves <palves@redhat.com>
* config/mips-idt.exp: Delete.
* gdb.base/a2-run.exp: Remove mips-idt xfails.
* gdb.base/bitfields.exp: Remove mips-idt restarts.
* gdb.base/break.exp: Remove mips-idt references.
* gdb.base/chng-syms.exp: Ditto.
* gdb.base/default.exp: Ditto.
* gdb.base/funcargs.exp (funcargs_reload): Delete.
(top level): Don't call it.
* gdb.base/opaque.exp: Remove mips-idt restarts.
* gdb.base/ptype.exp: Remove mips-idt xfails.
* gdb.base/scope.exp: Remove mips-idt restarts.
* gdb.base/sepdebug.exp: Remove mips-idt references.
* gdb.base/watchpoint.exp (maybe_clean_restart)
(maybe_reinitialize): Delete.
(test_disabling_watchpoints, test_disabling_watchpoints)
(test_watchpoint_triggered_in_syscall)
(test_watchpoint_and_breakpoint, test_inaccessible_watchpoint):
Don't call them.
|
|
* gdb.base/watchpoint.exp (no_hw): New global.
(maybe_clean_restart, maybe_reinitialize): If no_hw is set,
disable hw watchpoints.
(test_wide_location_1, test_wide_location_2): If no_hw is set,
don't expect hw watchpoints.
(no_hw_watchpoints): Always clean restart.
(do_tests): New procedure, factored out from the top level.
(top level): Run tests twice. Once with hw watchpoints enabled,
another time with hw watchpoints disabled.
|
|
* gdb.base/watchpoint.exp (test_no_hw_watchpoints): New, factored
out from the top level.
(top level): Call it instead.
|
|
* gdb.base/watchpoint.exp (top level): Re-enable hardware
watchpoints sooner.
|
|
* gdb.base/watchpoint.exp (top level): Delete watch ival3.
|
|
* gdb.base/watchpoint.exp (test_watchpoint_in_big_blob): Expect
"You may have requested too many hardware
breakpoints/watchpoints".
|
|
* gdb.base/watchpoint.exp (maybe_clean_restart)
(maybe_reinitialize): New.
(test_disabling_watchpoints): Call maybe_reinitialize. Don't
expect "hit N times".
(test_disabling_watchpoints, test_complex_watchpoint)
(test_watchpoint_and_breakpoint, test_inaccessible_watchpoint):
Call maybe_clean_restart.
(top level): Use clean_restart. Remove "mips-idt-*"
reinitialization.
|
|
* gdb.base/watchpoint.exp: Always run test_complex_watchpoint.
|
|
* gdb.base/watchpoint.exp: Clean restart after tests that don't
require `initialize' anymore. Remove unnecessary `initialize'
calls.
|
|
* gdb.base/watchpoint.exp (wp_set): Delete.
(initialize, test_simple_watchpoint, top level): Remove dead code.
|
|
* gdb.base/watchpoint.exp (test_inaccessible_watchpoint): Fix
typo.
|
|
* gdb.base/watchpoint.exp: Replace send_gdb/gdb_expect by gdb_test
and gdb_test_multiple.
|
|
Remove all calls to strace.
|
|
First, fix a technical problem with the function recurser. The test sets a
watch on local_x at a point where its value is technically undefined. The
test is written assuming that the value is not initially 2, but nothing in the
C standard guarantees that.
Second, augment the existing test for variables in recursive calls to check an
equivalent expression that explicitly sets the scope of the local variable
being tracked.
2012-01-11 Paul Hilfinger <hilfingr@adacore.com>
* gdb.base/watchpoint.c (recurser): Initialize local_x.
(main): Repeat recurser call.
* gdb.base/watchpoint.exp: Check that 'watch recurser::local_x' is
equivalent to 'local_x'.
|
|
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
|
* gdb.base/watchpoint.c (struct foo2, foo2, struct foo4, foo4)
(func6, func7): New.
(main): Call func6 and func7.
* gdb.base/watchpoint.exp (test_wide_location_1)
(test_wide_location_2): New.
(top level): Re-enable hardware watchpoints if necessary. Call
test_wide_location_1 and test_wide_location_2.
|
|
gdb/
* breakpoint.c (works_in_software_mode_watchpoint): Also return
true for software watchpoints.
gdb/testsuite/
* gdb.base/watchpoint.exp
(test_disable_enable_software_watchpoint): New procedure.
(top level): Run it.
|
|
* breakpoint.c (watch_command_1): Remove colon from exp_string.
gdb/testsuite/
* gdb.base/watchpoint.exp (test_inaccessible_watchpoint): Don't
expect a colon in watch -location output.
|
|
(skip_hw_watchpoint_tests): Likewise.
(skip_hw_watchpoint_multi_tests): Likewise.
(skip_hw_watchpoint_access_tests): Likewise.
* gdb.base/hbreak.exp: Use appropriate skip_hw_..._tests checks.
* gdb.base/pr11022.exp: Likewise.
* gdb.base/watch-read.exp: Likewise.
* gdb.base/watch_thread_num.exp: Likewise.
* gdb.base/watchpoint-hw-hit-once.exp: Likewise.
* gdb.base/watchpoint-hw.exp: Likewise.
* gdb.base/watchpoint.exp: Likewise.
* gdb.threads/local-watch-wrong-thread.exp: Likewise.
* gdb.threads/watchthreads-reorder.exp: Likewise.
* gdb.threads/watchthreads.exp: Likewise.
* gdb.threads/watchthreads2.exp: Likewise.
|
|
|
|
* breakpoint.c (watch_command_1): Get a pointer of the lazy
version of the expression's value, even if reading the value from
memory fails. When creating a -location watchpoint, get the
value's address from the lazy value pointer.
gdb/testsuite/
* gdb.base/watchpoint.exp: Test "watch -location" with an
innacessible location.
|
|
* gdb.base/maint.exp: Expect "." prefix.
* gdb.base/nodebug.exp: Expect "." Likewise.
* gdb.base/sepsymtab.exp: Expect "." Likewise.
* gdb.base/watchpoint-cond-gone.exp: Likewise.
* gdb.base/watchpoint.exp: Expect a software watch to be created for
POWER server processors.
|
|
value specially.
testsuite/
* gdb.base/watchpoint.exp: Call test_inaccessible_watchpoint
before disabling hardware watchpoints.
(test_inaccessible_watchpoint): Check that hardware watchpoints
are used. Test for watchpoints on a constant address.
|
|
* value.c (release_value): Clear 'next' pointer.
* breakpoint.c (watch_command_1): Add 'just_location' argument.
(watch_command_wrapper): Update.
(watch_maybe_just_location): New function.
(watch_command): Update.
(rwatch_command_wrapper): Update.
(rwatch_command): Update.
(awatch_command_wrapper): Update.
(awatch_command): Update.
(check_for_argument): New function.
(_initialize_breakpoint): Update help text.
gdb/testsuite
* gdb.base/help.exp: Update.
* gdb.base/watchpoint.exp (test_watchpoint_and_breakpoint): Delete
watchpoint.
(test_watch_location): New proc.
(test_watchpoint_in_big_blob): Delete watchpoint.
* gdb.base/watchpoint.c (func5): New function.
(main): Call it.
gdb/doc
* gdb.texinfo (Set Watchpoints): Document -location option.
|
|
2010-06-16 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* breakpoint.c: Include parser-defs.h.
(watchpoint_exp_is_const): New function.
(watch_command_1): Call watchpoint_exp_is_const to check
if the expression is constant.
gdb/doc/ChangeLog:
2010-06-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo: Include information about the correct use
of addresses in the `watch' command.
gdb/testsuite/ChangeLog:
2010-06-16 Jan Kratochvil <jan.kratochvil@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/watch-notconst.c: New file.
* gdb.base/watch-notconst.S: New file.
* gdb.base/watch-notconst2.c: New file.
* gdb.base/watch-notconst2.S: New file.
* gdb.base/watch-notconst.exp: New file.
* gdb.base/watchpoint.c (global_ptr_ptr): New variable.
(func4): Add operations on `global_ptr_ptr'.
* gdb.base/watchpoint.exp (test_constant_watchpoint): New
routine to test watchpoints created with a constant expression.
(test_inaccessible_watchpoint): Include tests for watchpoints
created with a constant expression.
|
|
* gdb.base/commands.exp: Replace gdb_test with gdb_test_no_output.
* gdb.base/display.exp: Ditto.
* gdb.base/find.exp: Ditto.
* gdb.base/ifelse.exp: Ditto.
* gdb.base/multi-forks.exp: Ditto.
* gdb.base/recurse.exp: Ditto.
* gdb.base/setshow.exp: Ditto.
* gdb.base/value-double-free.exp: Ditto.
* gdb.base/watch-vfork.exp: Ditto.
* gdb.base/watch_thread_num.exp: Ditto.
* gdb.base/watchpoint-solib.exp: Ditto.
* gdb.base/watchpoint.exp: Ditto.
* gdb.base/watchpoints.exp: Ditto.
* gdb.cp/classes.exp: Replace gdb_test with gdb_test_no_output.
* gdb.cp/overload.exp: Ditto.
* gdb.cp/virtfunc.exp: Ditto.
* gdb.python/py-value.exp: Replace gdb_test with gdb_test_no_output.
* gdb.reverse/watch-precsave.exp:
Replace gdb_test with gdb_test_no_output.
* gdb.threads/attach-into-signal.exp:
Replace gdb_test with gdb_test_no_output.
* gdb.threads/local-watch-wrong-thread.exp: Ditto.
* gdb.threads/watchthreads.exp: Ditto.
* gdb.threads/watchthreads2.exp: Ditto.
* gdb.trace/deltrace.exp: Replace gdb_test with gdb_test_no_output.
* gdb.trace/tfind.exp: Ditto.
|
|
* gdb.base/arithmet.exp: Use gdb_test_no_output.
* gdb.base/arrayidx.exp: Ditto.
* gdb.base/attach.exp: Ditto.
* gdb.base/auxv.exp: Ditto.
* gdb.base/bigcre.exp: Ditto.
* gdb.base/break-always.exp: Ditto.
* gdb.base/break-interp.exp: Ditto.
* gdb.base/break.exp: Ditto.
* gdb.base/breakpoint-shadow.exp: Ditto.
* gdb.base/call-ar-st.exp: Ditto.
* gdb.base/call-sc.exp: Ditto.
* gdb.base/call-signal-resume.exp: Ditto.
* gdb.base/callfuncs.exp: Ditto.
* gdb.base/catch-syscall.exp: Ditto.
* gdb.base/charset.exp: Ditto.
* gdb.base/code-expr.exp: Ditto.
* gdb.base/commands.exp: Ditto.
* gdb.base/cond-expr.exp: Ditto.
* gdb.base/condbreak.exp: Ditto.
* gdb.base/cursal.exp: Ditto.
* gdb.base/cvexpr.exp: Ditto.
* gdb.base/default.exp: Ditto.
* gdb.base/del.exp: Ditto.
* gdb.base/detach.exp: Ditto.
* gdb.base/display.exp: Ditto.
* gdb.base/ena-dis-br.exp: Ditto.
* gdb.base/eval-skip.exp: Ditto.
* gdb.base/foll-fork.exp: Ditto.
* gdb.base/foll-vfork.exp: Ditto.
* gdb.base/frame-args.exp: Ditto.
* gdb.base/funcargs.exp: Ditto.
* gdb.base/gcore-buffer-overflow.exp: Ditto.
* gdb.base/gdbvars.exp: Ditto.
* gdb.base/help.exp: Ditto.
* gdb.base/ifelse.exp: Ditto.
* gdb.base/included.exp: Ditto.
* gdb.base/list.exp: Ditto.
* gdb.base/macscp.exp: Ditto.
* gdb.base/maint.exp: Ditto.
* gdb.base/multi-fork.exp: Ditto.
* gdb.base/overlays.exp: Ditto.
* gdb.base/page.exp: Ditto.
* gdb.base/pending.exp: Ditto.
* gdb.base/pointers.exp: Ditto.
* gdb.base/pr11022.exp: Ditto.
* gdb.base/prelink.exp: Ditto.
* gdb.base/printcmds.exp: Ditto.
* gdb.base/psymtab.exp: Ditto.
* gdb.base/randomize.exp: Ditto.
* gdb.base/relational.exp: Ditto.
* gdb.base/relocate.exp: Ditto.
* gdb.base/remote.exp: Ditto.
* gdb.base/sepdebug.exp: Ditto.
* gdb.base/set-lang-auto.exp: Ditto.
* gdb.base/setshow.exp: Ditto.
* gdb.base/setvar.exp: Ditto.
* gdb.base/signals.exp: Ditto.
* gdb.base/signull.exp: Ditto.
* gdb.base/sigstep.exp: Ditto.
* gdb.base/sizeof.exp: Ditto.
* gdb.base/solib-disc.exp: Ditto.
* gdb.base/store.exp: Ditto.
* gdb.base/structs.exp: Ditto.
* gdb.base/structs2.exp: Ditto.
* gdb.base/subst.exp: Ditto.
* gdb.base/term.exp: Ditto.
* gdb.base/trace-commands.exp: Ditto.
* gdb.base/unwindonsignal.exp: Ditto.
* gdb.base/valgrind-db-attach.exp: Ditto.
* gdb.base/varargs.exp: Ditto.
* gdb.base/watch-cond.exp: Ditto.
* gdb.base/watch_thread_num.exp: Ditto.
* gdb.base/watchpoint-cond-gone.exp: Ditto.
* gdb.base/watchpoint.exp: Ditto.
* gdb.base/whatis-exp.exp: Ditto.
|
|
* gdb.base/relational.exp: Replace uses of send_gdb / gdb_expect.
* gdb.base/relocate.exp: Replace uses of send_gdb / gdb_expect.
* gdb.base/restore.exp: Replace uses of send_gdb / gdb_expect.
* gdb.base/return.exp: Replace uses of send_gdb / gdb_expect.
* gdb.base/return2.exp: Replace uses of send_gdb / gdb_expect.
* gdb.base/sepdebug.exp: Replace uses of send_gdb / gdb_expect.
* gdb.base/setshow.exp: Replace uses of send_gdb / gdb_expect.
* gdb.base/setvar.exp: Replace uses of send_gdb / gdb_expect.
* gdb.base/shlib-call.exp: Replace uses of send_gdb / gdb_expect.
* gdb.base/shreloc.exp: Replace uses of send_gdb / gdb_expect.
* gdb.base/sigall.exp: Replace uses of send_gdb / gdb_expect.
* gdb.base/sigbpt.exp: Replace uses of send_gdb / gdb_expect.
* gdb.base/signull.exp: Replace uses of send_gdb / gdb_expect.
* gdb.base/so-impl-ld.exp: Replace uses of send_gdb / gdb_expect.
* gdb.base/varargs.exp: Replace uses of send_gdb / gdb_expect.
* gdb.base/volatile.exp: Replace uses of send_gdb / gdb_expect.
* gdb.base/watch_thread_num.exp: Replace uses of send_gdb / gdb_expect.
* gdb.base/watchpoint.exp: Replace uses of send_gdb / gdb_expect.
|
|
2010-05-05 Joel Brobecker <brobecker@adacore.com>
Remove the use of prms_id and bug_id throughout the testsuite.
|
|
Nathan Sidwell <nathan@codesourcery.com>
* breakpoint.c (breakpoint_1): Add filter argument, return number of
breakpoints printed.
(is_hardware_watchpoint): Make argument const.
(is_watchpoint): Ditto.
(is_tracepoint): Merge of tracepoint_type and breakpoint_is_tracepoint,
use it everywhere.
(breakpoints_info): Pass NULL to breakpoint_1.
(maintenance_info_breakpoints): Ditto.
(watchpoints_info): New function.
(tracepoints_info): Use breakpoint_1 filter.
(set_ignore_count): Warn that tracepoint ignore count will be ignored.
(_initialize_breakpoint): Make "info watchpoints" its own command.
* breakpoint.h (is_tracepoint): Rename from breakpoint_is_tracepoint.
* mi/mi-cmd-break.c (mi_cmd_break_commands): Use is_tracepoint.
* gdb.texinfo (Setting Breakpoints): "info watch" no longer a synonym.
(Setting Watchpoints): Update description of "info watch".
(Disabling Breakpoints): Only "info break" lists all.
* gdb.base/completion.exp: Update for new "info watchpoints".
* gdb.base/default.exp: Ditto.
* gdb.base/help.exp: Ditto.
* gdb.base/watchpoint.exp: Ditto.
* gdb.trace/infotrace.exp: Update "info tracpoints" output.
|
|
Automatic update by copyright.sh.
|
|
* valarith.c (value_equal_contents): New function.
* value.h (value_equal_contents): Declare.
* breakpoint.c (watchpoint_check): Use value_equal_contents
instead of value_equal.
gdb/testsuite/
* gdb.base/watchpoint.exp (test_watchpoint_in_big_blob): New function.
(top level): Call test_watchpoint_in_big_blob.
* gdb.base/watchpoint.c (buf): Change size to value too big for hardware
watchpoints.
(func3): Write to buf.
|
