aboutsummaryrefslogtreecommitdiff
path: root/gdb/testsuite/gdb.base/annota1.exp
AgeCommit message (Collapse)AuthorFilesLines
2018-01-02Update copyright year range in all GDB filesJoel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files
2017-10-13Skip a few tests on targets that can't use the "run" commmand.Pedro Alves1-5/+3
These tests want to use raw "run", so skip them on targets that can't do that. Also adds a small utility procedure that clearly conveys intent instead of explicitly checking use_gdb_stub in the testcases. This makes sure these testcases continue to be skipped with --target_board=native-gdbserver once that board stops setting is_remote. gdb/testsuite/ChangeLog: 2017-10-13 Pedro Alves <palves@redhat.com> * lib/gdb.exp (target_can_use_run_cmd): New procedure. * gdb.base/annota1.exp: Use it instead of is_remote. * gdb.base/annota3.exp: Use it instead of is_remote. * gdb.cp/annota2.exp: Use it instead of is_remote. * gdb.cp/annota3.exp: Use it instead of is_remote. * gdb.multi/bkpt-multi-exec.exp: Use it instead of is_remote.
2017-01-01update copyright year range in GDB filesJoel Brobecker1-1/+1
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2016-12-01Fixup testcases outputting own name as a test name and standardize failed ↵Luis Machado1-1/+1
compilation messages Changes in v3: - Adjusted some testcases where the message "failed to compile" was not unique. Changes in v2: - Addressed comments from reviewers. - Fixed spurious whitespaces. - Changed compilation failure messages that included source/binary paths to ones that are short and deterministic. --- Another bit of cleanup to the testsuite. We have a number of tests that are not honoring the rule of not outputting their own name as a test name. I fixed up all the offenders i could find with the following regular expression: "(xfail|kfail|kpass|fail|pass|unsupported|untested) ([A-Za-z0-9]+|\\\$(.)*testfile(.)*)\.exp$" gdb/testsuite/ChangeLog: 2016-12-01 Luis Machado <lgustavo@codesourcery.com> Fix test names and standardize compilation error messages throughout the following files: * gdb.ada/start.exp * gdb.arch/alpha-step.exp * gdb.arch/e500-prologue.exp * gdb.arch/ftrace-insn-reloc.exp * gdb.arch/gdb1291.exp * gdb.arch/gdb1431.exp * gdb.arch/gdb1558.exp * gdb.arch/i386-dr3-watch.exp * gdb.arch/i386-sse-stack-align.exp * gdb.arch/ia64-breakpoint-shadow.exp * gdb.arch/pa-nullify.exp * gdb.arch/powerpc-aix-prologue.exp * gdb.arch/thumb-bx-pc.exp * gdb.base/annota1.exp * gdb.base/annota3.exp * gdb.base/arrayidx.exp * gdb.base/assign.exp * gdb.base/attach.exp * gdb.base/auxv.exp * gdb.base/bang.exp * gdb.base/bfp-test.exp * gdb.base/bigcore.exp * gdb.base/bitfields2.exp * gdb.base/break-fun-addr.exp * gdb.base/break-probes.exp * gdb.base/call-rt-st.exp * gdb.base/callexit.exp * gdb.base/catch-fork-kill.exp * gdb.base/charset.exp * gdb.base/checkpoint.exp * gdb.base/comprdebug.exp * gdb.base/constvars.exp * gdb.base/coredump-filter.exp * gdb.base/cursal.exp * gdb.base/cvexpr.exp * gdb.base/detach.exp * gdb.base/display.exp * gdb.base/dmsym.exp * gdb.base/dprintf-pending.exp * gdb.base/dso2dso.exp * gdb.base/dtrace-probe.exp * gdb.base/dump.exp * gdb.base/enum_cond.exp * gdb.base/exe-lock.exp * gdb.base/exec-invalid-sysroot.exp * gdb.base/execl-update-breakpoints.exp * gdb.base/exprs.exp * gdb.base/fileio.exp * gdb.base/find.exp * gdb.base/finish.exp * gdb.base/fixsection.exp * gdb.base/foll-vfork.exp * gdb.base/frame-args.exp * gdb.base/gcore.exp * gdb.base/gdb1250.exp * gdb.base/global-var-nested-by-dso.exp * gdb.base/gnu-ifunc.exp * gdb.base/hashline1.exp * gdb.base/hashline2.exp * gdb.base/hashline3.exp * gdb.base/hbreak-in-shr-unsupported.exp * gdb.base/huge.exp * gdb.base/infcall-input.exp * gdb.base/info-fun.exp * gdb.base/info-shared.exp * gdb.base/jit-simple.exp * gdb.base/jit-so.exp * gdb.base/jit.exp * gdb.base/jump.exp * gdb.base/label.exp * gdb.base/lineinc.exp * gdb.base/logical.exp * gdb.base/longjmp.exp * gdb.base/macscp.exp * gdb.base/miscexprs.exp * gdb.base/new-ui-echo.exp * gdb.base/new-ui-pending-input.exp * gdb.base/new-ui.exp * gdb.base/nodebug.exp * gdb.base/nofield.exp * gdb.base/offsets.exp * gdb.base/overlays.exp * gdb.base/pending.exp * gdb.base/pointers.exp * gdb.base/pr11022.exp * gdb.base/printcmds.exp * gdb.base/prologue.exp * gdb.base/ptr-typedef.exp * gdb.base/realname-expand.exp * gdb.base/relativedebug.exp * gdb.base/relocate.exp * gdb.base/remote.exp * gdb.base/reread.exp * gdb.base/return2.exp * gdb.base/savedregs.exp * gdb.base/sep.exp * gdb.base/sepdebug.exp * gdb.base/sepsymtab.exp * gdb.base/set-inferior-tty.exp * gdb.base/setshow.exp * gdb.base/shlib-call.exp * gdb.base/sigaltstack.exp * gdb.base/siginfo-addr.exp * gdb.base/signals.exp * gdb.base/signull.exp * gdb.base/sigrepeat.exp * gdb.base/so-impl-ld.exp * gdb.base/solib-display.exp * gdb.base/solib-overlap.exp * gdb.base/solib-search.exp * gdb.base/solib-symbol.exp * gdb.base/structs.exp * gdb.base/structs2.exp * gdb.base/symtab-search-order.exp * gdb.base/twice.exp * gdb.base/unload.exp * gdb.base/varargs.exp * gdb.base/watchpoint-solib.exp * gdb.base/watchpoint.exp * gdb.base/whatis.exp * gdb.base/wrong_frame_bt_full.exp * gdb.btrace/dlopen.exp * gdb.cell/ea-standalone.exp * gdb.cell/ea-test.exp * gdb.cp/dispcxx.exp * gdb.cp/gdb2384.exp * gdb.cp/method2.exp * gdb.cp/nextoverthrow.exp * gdb.cp/pr10728.exp * gdb.disasm/am33.exp * gdb.disasm/h8300s.exp * gdb.disasm/mn10300.exp * gdb.disasm/sh3.exp * gdb.dwarf2/dw2-dir-file-name.exp * gdb.fortran/complex.exp * gdb.fortran/library-module.exp * gdb.guile/scm-pretty-print.exp * gdb.guile/scm-symbol.exp * gdb.guile/scm-type.exp * gdb.guile/scm-value.exp * gdb.linespec/linespec.exp * gdb.mi/gdb701.exp * gdb.mi/gdb792.exp * gdb.mi/mi-breakpoint-changed.exp * gdb.mi/mi-dprintf-pending.exp * gdb.mi/mi-dprintf.exp * gdb.mi/mi-exit-code.exp * gdb.mi/mi-pending.exp * gdb.mi/mi-solib.exp * gdb.mi/new-ui-mi-sync.exp * gdb.mi/pr11022.exp * gdb.mi/user-selected-context-sync.exp * gdb.opt/solib-intra-step.exp * gdb.python/py-events.exp * gdb.python/py-finish-breakpoint.exp * gdb.python/py-mi.exp * gdb.python/py-prettyprint.exp * gdb.python/py-shared.exp * gdb.python/py-symbol.exp * gdb.python/py-template.exp * gdb.python/py-type.exp * gdb.python/py-value.exp * gdb.reverse/solib-precsave.exp * gdb.reverse/solib-reverse.exp * gdb.server/solib-list.exp * gdb.stabs/weird.exp * gdb.threads/reconnect-signal.exp * gdb.threads/stepi-random-signal.exp * gdb.trace/actions.exp * gdb.trace/ax.exp * gdb.trace/backtrace.exp * gdb.trace/change-loc.exp * gdb.trace/deltrace.exp * gdb.trace/ftrace-lock.exp * gdb.trace/ftrace.exp * gdb.trace/infotrace.exp * gdb.trace/mi-tracepoint-changed.exp * gdb.trace/packetlen.exp * gdb.trace/passcount.exp * gdb.trace/pending.exp * gdb.trace/range-stepping.exp * gdb.trace/report.exp * gdb.trace/stap-trace.exp * gdb.trace/tfind.exp * gdb.trace/trace-break.exp * gdb.trace/trace-condition.exp * gdb.trace/trace-enable-disable.exp * gdb.trace/trace-mt.exp * gdb.trace/tracecmd.exp * gdb.trace/tspeed.exp * gdb.trace/tsv.exp * lib/perftest.exp
2016-04-22Fix fail in gdb.base/annota1.exp and gdb.base/annota3.expYao Qi1-6/+7
Hi, I am seeing the fail below on aarch64-linux with gcc 4.9.2, break main Breakpoint 1 at 0x4006e8: file binutils-gdb/gdb/testsuite/gdb.base/annota1.c, line 14.^M (gdb) FAIL: gdb.base/annota1.exp: breakpoint main the test expects the breakpoint is set on line 15. Let us look at the main function, 12 int 13 main (void) 14 { 15 int my_array[3] = { 1, 2, 3 }; /* break main */ 16 17 value = 7; 18 19 #ifdef SIGUSR1 20 signal (SIGUSR1, handle_USR1); 21 #endif (gdb) disassemble main Dump of assembler code for function main: 0x00000000004006e0 <+0>: stp x29, x30, [sp,#-48]! 0x00000000004006e4 <+4>: mov x29, sp 0x00000000004006e8 <+8>: adrp x0, 0x411000 <signal@got.plt> 0x00000000004006ec <+12>: add x0, x0, #0x40 the breakpoint is set on the right address after skipping prologue, but 0x00000000004006e8 is mapped to the line 14, as shown below, (gdb) maintenance info line-table objfile: /home/yao.qi/source/build-aarch64/gdb/testsuite/outputs/gdb.base/annota1/annota1 ((struct objfile *) 0x2b0e1850) compunit_symtab: ((struct compunit_symtab *) 0x2b0ded50) symtab: /home/yao.qi/source/binutils-gdb/gdb/testsuite/gdb.base/annota1.c ((struct symtab *) 0x2b0dedd0) linetable: ((struct linetable *) 0x2b12c8b0): INDEX LINE ADDRESS 0 7 0x00000000004006d0 1 8 0x00000000004006d8 2 14 0x00000000004006e0 3 14 0x00000000004006e8 4 15 0x00000000004006fc so GDB does nothing wrong. Program hits breakpoint on either line 14 or line 15 is right to me. With anther gcc (4.9.3), the line-table looks correct, and no test fail. Instead of setting breakpoint on main and assuming the line is what we get from the source, we can set breakpoint on that line. On the other hand, the test prints the values of the array and check, so we need to set breakpoint on the line setting the values of array and "next", rather than setting the breakpoint on main. gdb/testsuite: 2016-04-22 Yao Qi <yao.qi@linaro.org> * gdb.base/annota1.exp: Set breakpoint on line $main_line. * gdb.base/annota3.exp: Likewise.
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-12-21Remove HP-UX references fom testsuiteSimon Marchi1-10/+0
This patch removes all special cases for HP-UX, for which support has been removed earlier, that I found in the testsuite. Note that the hppa architecture != HP-UX, since other OSes can run on hppa, so I tried to leave everything that is not HP-UX specific. Two complete tests were completely HP-UX specific, so I removed them. I ran the testsuite on Linux x86-64, native and native-gdbserver, and noticed no regressions. gdb/testsuite/ChangeLog: * gdb.asm/asm-source.exp: Remove HP-UX references. * gdb.base/annota1.exp: Likewise. * gdb.base/annota3.exp: Likewise. * gdb.base/attach.exp: Likewise. * gdb.base/bigcore.exp: Likewise. * gdb.base/break.exp: Likewise. * gdb.base/call-ar-st.exp: Likewise. * gdb.base/callfuncs.exp: Likewise. * gdb.base/catch-fork-static.exp: Likewise. * gdb.base/display.exp: Likewise. * gdb.base/foll-exec-mode.exp: Likewise. * gdb.base/foll-exec.exp: Likewise. * gdb.base/foll-fork.exp: Likewise. * gdb.base/foll-vfork.exp: Likewise. * gdb.base/funcargs.exp: Likewise. * gdb.base/hbreak2.exp: Likewise. * gdb.base/inferior-died.exp: Likewise. * gdb.base/interrupt.exp: Likewise. * gdb.base/multi-forks.exp: Likewise. * gdb.base/nodebug.exp: Likewise. * gdb.base/sepdebug.exp: Likewise. * gdb.base/solib1.c: Likewise. * gdb.base/step-test.exp: Likewise. * gdb.mi/non-stop.c: Likewise. * gdb.mi/pthreads.c: Likewise. * gdb.multi/bkpt-multi-exec.ex: Likewise. * gdb.threads/pthreads.c: Likewise. * gdb.threads/staticthreads.exp: Likewise. * lib/future.exp: Likewise. * lib/gdb.exp: Likewise. * gdb.base/so-indr-cl.c: Remove. * gdb.base/so-indr-cl.exp: Likewise. * gdb.base/solib.c: Likewise. * gdb.base/solib.exp: Likewise. * gdb.base/solib2.c: Likewise.
2015-01-09watch_thread_num.exp and targets with fairer event reportingPedro Alves1-3/+6
This patch fixes the watch_thread_num.exp test to work when the target is better at making event handling be fair among threads. I wrote patches that make GDB native and GDBserver event handling fairer between threads. That is, if threads A and B both simultaneously trigger some debug event, GDB will pick either A or B at random, rather than always handling the event of A first. There's code for that in the Linux backends (gdb and gdbserver) already, but it can be improved, and only works in all-stop mode. With those fixes in place, I found that the watch_thread_num.exp would often time out. The problem is that the test only works _because_ event handling isn't as fair as intended. With the fairness fixes, the test falls victim of PR10116 (gdb drops watchpoints on multi-threaded apps) quite often. To expand on the PR10116 reference, consider that stop events are serialized to GDB core, through target_wait. Say a thread-specific watchpoint as set on thread A. When the "right" thread and some other "wrong" thread both trigger a watchpoint simultaneously, the target may report the "wrong" thread's hit to GDB first (thread B). When handling that event, GDB notices the watchpoint is for another thread, and so shouldn't cause a user-visible stop. On resume, GDB saves the now current value of the watched expression. Afterwards, the "right" thread (thread A) reports its watchpoint trigger. But the watched value hasn't changed since GDB last saved it, and so GDB doesn't report the watchpoint hit to the user. The way the test is written, the watchpoint is associated with the first thread that happens to report an event. It happens that GDB is processing events much more often for one of the threads, which usually will be that same first thread. Hacking the test with "set debug infrun 1", we see exactly that: $ grep "infrun.*\[Thread.*," testsuite/gdb.log | sort | uniq -c | sort -nr 70 infrun: 8798 [Thread 8798], 37 infrun: 8798 [Thread 8802], 36 infrun: 8798 [Thread 8804], 36 infrun: 8798 [Thread 8803], 35 infrun: 8798 [Thread 8805], 34 infrun: 8798 [Thread 8806], The first column shows the number of times the target reported an event for that thread, from: infrun: target_wait (-1, status) = infrun: 8798 [Thread 8798], infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP This masks out the PR10116 issue. However, if the target is better at giving equal priority to all threads, the PR10116 issue happens often, so it may take quite a while for the right thread to be the first to report its watchpoint event just after the memory being watched really changed, resulting in test time outs. Here's the number of events handled for each thread on a gdbserver run with the event fairness patches: $ grep "infrun.*\[Thread.*," gdb.log | sort | uniq -c 2961 infrun: 13591 [Thread 13591], 2956 infrun: 13591 [Thread 13595], 2941 infrun: 13591 [Thread 13596], 2932 infrun: 13591 [Thread 13597], 2905 infrun: 13591 [Thread 13598], 2891 infrun: 13591 [Thread 13599], Note how the number of events is much higher. The test routinely takes over 10 seconds to finish on my machine rather than under a second as with unpatched gdbserver, when it succeeds, but often it'll fail with timeouts too. So to make the test robust, this patch switches the tests to using "awatch" instead of "watch", as access watchpoints don't care about the watchpoint's "old value". With this, the test always finishes quickly, and we can even bump the number of threads concurrently writting to the shared variable, to have better assurance we're really testing the case of the "wrong" thread triggering a watchpoint. Here's the number of events I see for each thread on a run on my machine, with a gdbserver patched with the event fairness series: $ grep "infrun.*\[Thread.*," testsuite/gdb.log | sort | uniq -c 5 infrun: 5298 [Thread 5302], 4 infrun: 5298 [Thread 5303], 4 infrun: 5298 [Thread 5304], 4 infrun: 5298 [Thread 5305], 4 infrun: 5298 [Thread 5306], 4 infrun: 5298 [Thread 5307], 4 infrun: 5298 [Thread 5308], 4 infrun: 5298 [Thread 5309], 4 infrun: 5298 [Thread 5310], 4 infrun: 5298 [Thread 5311], 4 infrun: 5298 [Thread 5312], 4 infrun: 5298 [Thread 5313], 4 infrun: 5298 [Thread 5314], 4 infrun: 5298 [Thread 5315], 4 infrun: 5298 [Thread 5316], gdb/testsuite/ 2015-01-09 Pedro Alves <palves@redhat.com> * gdb.base/annota1.exp (thread_test): Use srcfile and binfile from the global scope. Set a breakpoint after all threads are started rather than stepping over two source lines. Expect the prompt. * gdb.base/watch_thread_num.c (threads_started_barrier): New global. (NUM): Now 15. (main): Use threads_started_barrier to wait for all threads to start. Main thread no longer calls thread_function. Exit after 180 seconds. (loop): New function. (thread_function): Wait on threads_started_barrier barrier. Call 'loop' at each iteration. * gdb.base/watch_thread_num.exp: Continue to breakpoint after all threads have started, instead of hardcoding number of "next" steps. Use an access watchpoint instead of a write watchpoint.
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker1-1/+1
2013-06-27test suite update - gdb.base/[ab]Tom Tromey1-9/+4
Convert files gdb.base/[ab]*.exp to use standard_output_file et al. * a2-run.exp, all-bin.exp, annota1.exp, annota3.exp, anon.exp, args.exp, arithmet.exp, arrayidx.exp, assign.exp, async-shell.exp, async.exp, attach-pie-misread.exp, attach-pie-noexec.exp, attach-twice.exp, attach.exp, auxv.exp, bang.exp, bfp-test.exp, bigcore.exp, bitfields.exp, bitfields2.exp, break-entry.exp, break-interp.exp, break-on-linker-gcd-function.exp, breakpoint-shadow.exp: Use standard_testfile, standard_output_file, prepare_for_testing, clean_restart.
2013-01-22If a breakpoint is not user visible, then there's no point inPedro Alves1-1/+1
bothering the frontend about it... This is the exact same check MI does. I also smoke tested Emacs 23 in gud-gdb mode, both annotations=2 and annotations=3. I didn't notice anything break. gdb/ 2013-01-22 Pedro Alves <palves@redhat.com> * annotate.c (breakpoint_changed): Skip if breakpoint is not user-visible. gdb/testsuite/ 2013-01-22 Pedro Alves <palves@redhat.com> * gdb.base/annota1.exp (signal sent): No longer expect breakpoints-invalid. * gdb.cp/annota2.exp (continue until exit) (watch triggered on a.x): Ditto.
2013-01-22All annotate_breakpoints_changed calls are along-sidePedro Alves1-9/+10
observer_notify_breakpoints_changed calls. All, except the init_raw_breakpoint one. But that one is actually wrong. The breakpoint is being constructed at that point, and hasn't been placed on the breakpoint chain yet. It would be better placed in install_breakpoint, and I actually started out that way. But once the annotate_breakpoints_changed are parallel to the observer calls, we can fully move annotations to observers too. One issue is that this changes the order of annotations a bit. Before, we'd emit the annotation, and after call "mention()" on the breakpoint (which prints the breakpoint number, etc.). But, we call the observers _after_ mention is called, so the annotation output will change a little: void install_breakpoint (int internal, struct breakpoint *b, int update_gll) { add_to_breakpoint_chain (b); set_breakpoint_number (internal, b); if (is_tracepoint (b)) set_tracepoint_count (breakpoint_count); if (!internal) mention (b); observer_notify_breakpoint_created (b); if (update_gll) update_global_location_list (1); } I believe this order doesn't really matter (the frontend needs to wait for the prompt anyway), so I just adjust the expected output in the tests. Emacs in annotations mode doesn't seem to complain. Couple that with the previous patch that suppressed duplicated annotations, and, the fact that some annotations calls were actually missing (were we do have observer calls), more changes to the tests are needed anyway. Tested on x86_64 Fedora 17. gdb/ 2013-01-22 Pedro Alves <palves@redhat.com> * annotate.c (annotate_breakpoints_changed): Rename to ... (annotate_breakpoints_invalid): ... this. Make static. (breakpoint_changed): Adjust. (_initialize_annotate): Always install the observers. Install a "breakpoint_created" observer. * annotate.h (annotate_breakpoints_changed): Delete declaration. * breakpoint.c (set_breakpoint_condition) (breakpoint_set_commands, do_map_commands_command) (init_raw_breakpoint, clear_command, set_ignore_count) (enable_breakpoint_disp): No longer call annotate_breakpoints_changed. gdb/testsuite/ 2013-01-22 Pedro Alves <palves@redhat.com> * gdb.base/annota1.exp (breakpoints_invalid): New variable. Adjust tests to breakpoints-invalid changes. * gdb.cp/annota2.exp (breakpoints_invalid, frames_invalid): New variables. Adjust tests to breakpoints-invalid changes.
2013-01-22There's code in annotate.c and breakpoint.c that is supposed toPedro Alves1-1/+4
suppress multiple breakpoints-invalid annotations when the ignore count of a breakpoint changes, up until the target actually stops. But, the code is bogus: void annotate_breakpoints_changed (void) { if (annotation_level == 2) { target_terminal_ours (); printf_unfiltered (("\n\032\032breakpoints-invalid\n")); if (ignore_count_changed) ignore_count_changed = 0; /* Avoid multiple break annotations. */ } } The "ignore_count_changed" flag isn't actually guarding the output of the annotation at all. It would have been better written something like: void annotate_breakpoints_changed (void) { if (annotation_level == 2 && !ignore_count_changed) { target_terminal_ours (); printf_unfiltered (("\n\032\032breakpoints-invalid\n")); ignore_count_changed = 0; /* Avoid multiple break annotations. */ } } but, it wasn't. AFAICS, that goes all the way back to the original patch'es submission and check in, at <http://sourceware.org/ml/gdb-patches/1999-q4/msg00106.html>. I looked a tar of HP's wdb from 1999, and even though that contains local changes in the annotate code, this suppression seems borked there too to me. The original patch added a test to supposedly exercise this suppression, but, it actually doesn't. It merely tests that "breakpoints-invalid" is output after "stopped", but doesn't check whether the duplicates supression actually works (IOW, check that only _one_ annotation is seen). I was going to simply delete the tests too, but a following patch will eliminate the duplicates in a different way (which I needed for a different reason), so instead, I'm making the tests actually fail if a duplicate annotation is seen. Worry not, the test doesn't actually fail! The reason is that breakpoint.c does: else if (b->ignore_count > 0) { b->ignore_count--; annotate_ignore_count_change (); bs->stop = 0; /* Increase the hit count even though we don't stop. */ ++(b->hit_count); observer_notify_breakpoint_modified (b); } where the annotate_ignore_count_change call is meant to inform the "breakpoint_modified" annotation observer to ignore the notification. All sounds good. But, the trouble is that nowadays annotate.c only installs the observers if GDB is started with annotations enabled with a command line option (gdb --annotate=2): void _initialize_annotate (void) { if (annotation_level == 2) { observer_attach_breakpoint_deleted (breakpoint_changed); observer_attach_breakpoint_modified (breakpoint_changed); } } and annota1.exp, to enable annotations, starts GDB normally, and afterwards does "set annotate 2", so the observers aren't installed when annota1.exp is run, and therefore changing the ignore count isn't triggering any annotation at all... gdb/ 2013-01-22 Pedro Alves <palves@redhat.com> * annotate.c (ignore_count_changed): Delete. (annotate_breakpoints_changed): Don't clear ignore_count_changed. (annotate_ignore_count_change): Delete. (annotate_stopped): Don't emit a delayed breakpoints-changed annotation. * annotate.h (annotate_ignore_count_change): Delete. * breakpoint.c (bpstat_check_breakpoint_conditions): Don't call annotate_ignore_count_change. gdb/testsuite/ 2013-01-22 Pedro Alves <palves@redhat.com> * gdb.base/annota1.exp (annotate ignore count change): Add expected output for failure case.
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker1-1/+1
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-08-02 * gdb.base/annota1.exp: Accept no frames-invalid notificationUlrich Weigand1-1/+1
when starting up the program. * gdb.python/py-value.exp (test_value_numeric_ops): Pointers may show a symbolic value as well. * gdb.server/server-exec-info.exp: Skip test when skipping gdbserver test and/or when skipping shared library tests. * gdb.threads/linux-dp.exp: Unset "seen" when done with it to avoid name conflicts with other tests.
2012-07-27gdb/testsuite/Jan Kratochvil1-1/+1
Fix testsuite regression after --use-deprecated-index-sections removal. * gdb.base/annota1.exp (run until main breakpoint): Update the expect string. * gdb.base/async-shell.exp (gdbindex_warning_re): Likewise.
2012-06-21 * lib/gdb.exp (skip_altivec_tests, skip_vsx_tests)Tom Tromey1-1/+1
(build_executable): Update. (get_compiler_info): Remove 'binfile' argument. * gdb.ada/arrayidx.exp: Update. * gdb.ada/null_array.exp: Update. * gdb.arch/altivec-abi.exp: Update. * gdb.arch/altivec-regs.exp: Update. * gdb.arch/amd64-byte.exp: Update. * gdb.arch/amd64-dword.exp: Update. * gdb.arch/amd64-word.exp: Update. * gdb.arch/i386-avx.exp: Update. * gdb.arch/i386-byte.exp: Update. * gdb.arch/i386-sse.exp: Update. * gdb.arch/i386-word.exp: Update. * gdb.arch/ppc-dfp.exp: Update. * gdb.arch/ppc-fp.exp: Update. * gdb.arch/vsx-regs.exp: Update. * gdb.base/all-bin.exp: Update. * gdb.base/annota1.exp: Update. * gdb.base/async.exp: Update. * gdb.base/attach.exp: Update. * gdb.base/break-interp.exp: Update. * gdb.base/call-ar-st.exp: Update. * gdb.base/call-rt-st.exp: Update. * gdb.base/call-sc.exp: Update. * gdb.base/callfuncs.exp: Update. * gdb.base/catch-load.exp: Update. * gdb.base/completion.exp: Update. * gdb.base/complex.exp: Update. * gdb.base/condbreak.exp: Update. * gdb.base/consecutive.exp: Update. * gdb.base/constvars.exp: Update. * gdb.base/corefile.exp: Update. * gdb.base/eval-skip.exp: Update. * gdb.base/expand-psymtabs.exp: Update. * gdb.base/exprs.exp: Update. * gdb.base/fileio.exp: Update. * gdb.base/fixsection.exp: Update. * gdb.base/funcargs.exp: Update. * gdb.base/gdb11530.exp: Update. * gdb.base/gdb1555.exp: Update. * gdb.base/gnu-ifunc.exp: Update. * gdb.base/gnu_vector.exp: Update. * gdb.base/info-macros.exp: Update. * gdb.base/jit-simple.exp: Update. * gdb.base/jit-so.exp: Update. * gdb.base/jit.exp: Update. * gdb.base/langs.exp: Update. * gdb.base/list.exp: Update. * gdb.base/logical.exp: Update. * gdb.base/long_long.exp: Update. * gdb.base/longjmp.exp: Update. * gdb.base/macscp.exp: Update. * gdb.base/mips_pro.exp: Update. * gdb.base/miscexprs.exp: Update. * gdb.base/morestack.exp: Update. * gdb.base/nodebug.exp: Update. * gdb.base/opaque.exp: Update. * gdb.base/pc-fp.exp: Update. * gdb.base/pending.exp: Update. * gdb.base/permissions.exp: Update. * gdb.base/pointers.exp: Update. * gdb.base/prelink.exp: Update. * gdb.base/printcmds.exp: Update. * gdb.base/psymtab.exp: Update. * gdb.base/ptype.exp: Update. * gdb.base/relational.exp: Update. * gdb.base/scope.exp: Update. * gdb.base/setvar.exp: Update. * gdb.base/shlib-call.exp: Update. * gdb.base/shreloc.exp: Update. * gdb.base/signals.exp: Update. * gdb.base/sizeof.exp: Update. * gdb.base/so-impl-ld.exp: Update. * gdb.base/so-indr-cl.exp: Update. * gdb.base/solib-disc.exp: Update. * gdb.base/solib-display.exp: Update. * gdb.base/solib-nodir.exp: Update. * gdb.base/solib-overlap.exp: Update. * gdb.base/solib-symbol.exp: Update. * gdb.base/solib-weak.exp: Update. * gdb.base/solib.exp: Update. * gdb.base/store.exp: Update. * gdb.base/structs.exp: Update. * gdb.base/structs2.exp: Update. * gdb.base/type-opaque.exp: Update. * gdb.base/unload.exp: Update. * gdb.base/varargs.exp: Update. * gdb.base/volatile.exp: Update. * gdb.base/watch_thread_num.exp: Update. * gdb.base/watchpoint-solib.exp: Update. * gdb.base/watchpoint.exp: Update. * gdb.base/watchpoints.exp: Update. * gdb.base/whatis.exp: Update. * gdb.cell/arch.exp: Update. * gdb.cell/break.exp: Update. * gdb.cell/bt.exp: Update. * gdb.cell/core.exp: Update. * gdb.cell/data.exp: Update. * gdb.cell/ea-cache.exp: Update. * gdb.cell/f-regs.exp: Update. * gdb.cell/fork.exp: Update. * gdb.cell/gcore.exp: Update. * gdb.cell/mem-access.exp: Update. * gdb.cell/ptype.exp: Update. * gdb.cell/registers.exp: Update. * gdb.cell/sizeof.exp: Update. * gdb.cell/solib-symbol.exp: Update. * gdb.cell/solib.exp: Update. * gdb.cp/ambiguous.exp: Update. * gdb.cp/breakpoint.exp: Update. * gdb.cp/bs15503.exp: Update. * gdb.cp/casts.exp: Update. * gdb.cp/class2.exp: Update. * gdb.cp/cpexprs.exp: Update. * gdb.cp/cplusfuncs.exp: Update. * gdb.cp/ctti.exp: Update. * gdb.cp/dispcxx.exp: Update. * gdb.cp/gdb1355.exp: Update. * gdb.cp/gdb2384.exp: Update. * gdb.cp/gdb2495.exp: Update. * gdb.cp/infcall-dlopen.exp: Update. * gdb.cp/local.exp: Update. * gdb.cp/m-data.exp: Update. * gdb.cp/m-static.exp: Update. * gdb.cp/mb-ctor.exp: Update. * gdb.cp/mb-inline.exp: Update. * gdb.cp/mb-templates.exp: Update. * gdb.cp/member-ptr.exp: Update. * gdb.cp/method.exp: Update. * gdb.cp/namespace.exp: Update. * gdb.cp/nextoverthrow.exp: Update. * gdb.cp/nsdecl.exp: Update. * gdb.cp/nsrecurs.exp: Update. * gdb.cp/nsstress.exp: Update. * gdb.cp/nsusing.exp: Update. * gdb.cp/pr-1023.exp: Update. * gdb.cp/pr-1210.exp: Update. * gdb.cp/pr-574.exp: Update. * gdb.cp/pr9631.exp: Update. * gdb.cp/printmethod.exp: Update. * gdb.cp/psmang.exp: Update. * gdb.cp/re-set-overloaded.exp: Update. * gdb.cp/rtti.exp: Update. * gdb.cp/shadow.exp: Update. * gdb.cp/templates.exp: Update. * gdb.cp/try_catch.exp: Update. * gdb.dwarf2/dw2-ranges.exp: Update. * gdb.dwarf2/pr10770.exp: Update. * gdb.fortran/library-module.exp: Update. * gdb.hp/gdb.aCC/optimize.exp: Update. * gdb.hp/gdb.aCC/watch-cmd.exp: Update. * gdb.hp/gdb.base-hp/callfwmall.exp: Update. * gdb.hp/gdb.base-hp/hwwatchbus.exp: Update. * gdb.hp/gdb.base-hp/pxdb.exp: Update. * gdb.hp/gdb.base-hp/sized-enum.exp: Update. * gdb.hp/gdb.base-hp/so-thresh.exp: Update. * gdb.hp/gdb.compat/xdb1.exp: Update. * gdb.hp/gdb.compat/xdb2.exp: Update. * gdb.hp/gdb.compat/xdb3.exp: Update. * gdb.hp/gdb.defects/bs14602.exp: Update. * gdb.hp/gdb.defects/solib-d.exp: Update. * gdb.hp/gdb.objdbg/objdbg01.exp: Update. * gdb.hp/gdb.objdbg/objdbg02.exp: Update. * gdb.hp/gdb.objdbg/objdbg03.exp: Update. * gdb.hp/gdb.objdbg/objdbg04.exp: Update. * gdb.mi/gdb792.exp: Update. * gdb.mi/mi-pending.exp: Update. * gdb.mi/mi-solib.exp: Update. * gdb.mi/mi-var-cp.exp: Update. * gdb.opt/clobbered-registers-O2.exp: Update. * gdb.opt/inline-bt.exp: Update. * gdb.opt/inline-cmds.exp: Update. * gdb.opt/inline-locals.exp: Update. * gdb.python/py-events.exp: Update. * gdb.python/py-finish-breakpoint.exp: Update. * gdb.python/py-type.exp: Update. * gdb.reverse/solib-precsave.exp: Update. * gdb.reverse/solib-reverse.exp: Update. * gdb.server/solib-list.exp: Update. * gdb.stabs/weird.exp: Update. * gdb.threads/attach-into-signal.exp: Update. * gdb.threads/attach-stopped.exp: Update. * gdb.threads/tls-shared.exp: Update. * gdb.trace/change-loc.exp: Update. * gdb.trace/strace.exp: Update.
2012-03-16gdb:Gary Benson1-1/+1
PR breakpoints/10738 * dwarf2read.c (use_deprecated_index_sections): New global. (struct partial_die_info): New member may_be_inlined. (read_partial_die): Set may_be_inlined where appropriate. (add_partial_subprogram): Add partial symbols for partial DIEs that may be inlined. (new_symbol_full): Add inlined subroutines to the current scope. (write_psymtabs_to_index): Bump version number. (dwarf2_read_index): Read only version 6 indices unless use_deprecated_index_sections is set. * linespec.c (symbol_and_data_callback): New structure. (iterate_inline_only): New function. (iterate_over_all_matching_symtabs): New argument "include_inline". If nonzero, also call the callback for symbols representing inlined subroutines. (lookup_prefix_sym): Pass extra argument to the above. (find_function_symbols): Likewise. (add_matching_symbols_to_info): Likewise. * NEWS: Mention that GDB can now set breakpoints on inlined functions. gdb/doc: PR breakpoints/10738 * gdb.texinfo (Inline Functions): Remove the now-unnecessary @item stating that GDB cannot set breakpoints on inlined functions. (Mode Options): Document --use-deprecated-index-sections. (Index Section Format): Document new index section version format. gdb/testsuite: PR breakpoints/10738 * gdb.opt/inline-break.exp: New file. * gdb.opt/inline-break.c: Likewise. * gdb.dwarf2/inline-break.exp: Likewise. * gdb.dwarf2/inline-break.S: Likewise. * gdb.base/annota1.exp: Cope with old .gdb_index warnings. * gdb.base/async-shell.exp: Likewise. * lib/mi-support.exp (library_loaded_re): Likewise.
2012-02-28gdb/testsuite/Thomas Schwinge1-14/+17
* gdb.base/annota1.exp: Use gdb_get_line_number for retrieving line numbers instead of hardcoding them. * gdb.base/annota1.c: Provide suitable markers. * gdb.base/annota3.exp: Use gdb_get_line_number for retrieving line numbers instead of hardcoding them. * gdb.base/annota3.c: Provide suitable markers.
2012-01-162012-01-16 Pedro Alves <palves@redhat.com>Pedro Alves1-4/+0
Remove all calls to strace.
2012-01-04Copyright year update in most files of the GDB Project.Joel Brobecker1-2/+1
gdb/ChangeLog: Copyright year update in most files of the GDB Project.
2011-12-13gdb/doc/Pedro Alves1-4/+0
2011-12-13 Pedro Alves <pedro@codesourcery.com> * gdb.texinfo (Implementing a Remote Stub): Explain that you should transfer control to the stub in the startup code instead of in main. Mention the need to get past the initial breakpoint. gdb/testsuite/ 2011-12-13 Pedro Alves <pedro@codesourcery.com> Doug Evans <dje@google.com> * lib/gdb.exp (gdb_run_cmd, runto_main, gdb_compile) (clean_restart): Remove references to the gdb_stub target board variable. (gdb_step_for_stub): Delete. * gdb.base/annota1.exp: Remove all references to [target_info exists gdb_stub], gdb_step_for_stub and usestubs. * gdb.base/annota3.exp: Ditto. * gdb.base/async.exp: Ditto. * gdb.base/break.exp: Ditto. * gdb.base/code-expr.exp: Ditto. * gdb.base/commands.exp: Ditto. * gdb.base/completion.exp: Ditto. * gdb.base/condbreak.exp: Ditto. * gdb.base/consecutive.exp: Ditto. * gdb.base/cvexpr.exp: Ditto. * gdb.base/define.exp: Ditto. * gdb.base/display.exp: Ditto. * gdb.base/ena-dis-br.exp: Ditto. * gdb.base/environ.exp: Ditto. * gdb.base/gnu-ifunc.exp: Ditto. * gdb.base/maint.exp: Ditto. * gdb.base/pending.exp: Ditto. * gdb.base/sect-cmd.exp: Ditto. * gdb.base/sepdebug.exp: Ditto. * gdb.base/unload.exp: Ditto. * gdb.base/watchpoint-solib.exp: Ditto. * gdb.cp/annota2.exp: Ditto. * gdb.cp/annota3.exp: Ditto. * gdb.dwarf2/dw2-inline-param.exp: Ditto. * gdb.hp/gdb.compat/xdb1.exp: Ditto. * gdb.mi/mi-pending.exp: Ditto. * gdb.trace/circ.exp: Ditto. * gdb.cp/ovldbreak.exp: Ditto. Adjust expected line numbers. * gdb.base/list.exp: Ditto. * gdb.base/all-types.c: Remove all calls to set_debug_traps and breakpoint function and all references to the usestubs macro. * gdb.base/exprs.c: Ditto. * gdb.base/freebpcmd.c: Ditto. * gdb.base/bitfields.c: Ditto. * gdb.base/bitfields2.c: Ditto. * gdb.base/break.c: Ditto. * gdb.base/call-sc.c: Ditto. * gdb.base/call-signals.c: Ditto. * gdb.base/callfuncs.c: Ditto. * gdb.base/charset.c: Ditto. * gdb.base/consecutive.c: Ditto. * gdb.base/constvars.c: Ditto. * gdb.base/funcargs.c: Ditto. * gdb.base/int-type.c: Ditto. * gdb.base/interrupt.c: Ditto. * gdb.base/langs0.c: Ditto. * gdb.base/list0.c: Ditto. * gdb.base/mips_pro.c: Ditto. * gdb.base/miscexprs.c: Ditto. * gdb.base/nodebug.c: Ditto. * gdb.base/opaque0.c: Ditto. * gdb.base/pointers.c: Ditto. * gdb.base/printcmds.c: Ditto. * gdb.base/ptype.c: Ditto. * gdb.base/recurse.c: Ditto. * gdb.base/reread1.c: Ditto. * gdb.base/reread2.c: Ditto. * gdb.base/restore.c: Ditto. * gdb.base/return.c: Ditto. * gdb.base/run.c: Ditto. * gdb.base/scope0.c: Ditto. * gdb.base/sepdebug.c: Ditto. * gdb.base/setshow.c: Ditto. * gdb.base/setvar.c: Ditto. * gdb.base/sigall.c: Ditto. * gdb.base/signals.c: Ditto. * gdb.base/structs.c: Ditto. * gdb.base/structs2.c: Ditto. * gdb.base/testenv.c: Ditto. * gdb.base/twice.c: Ditto. * gdb.base/unwindonsignal.c: Ditto. * gdb.base/watchpoint.c: Ditto. * gdb.base/watchpoints.c: Ditto. * gdb.base/whatis.c: Ditto. * gdb.cp/classes.cc: Ditto. * gdb.cp/cplusfuncs.cc: Ditto. * gdb.cp/derivation.cc: Ditto. * gdb.cp/formatted-ref.cc: Ditto. * gdb.cp/misc.cc: Ditto. * gdb.cp/overload.cc: Ditto. * gdb.cp/ovldbreak.cc: Ditto. * gdb.cp/ref-params.cc: Ditto. * gdb.cp/ref-types.cc: Ditto. * gdb.cp/templates.cc: Ditto. * gdb.cp/virtfunc.cc: Ditto. * gdb.hp/gdb.aCC/run.c: Ditto. * gdb.hp/gdb.base-hp/callfwmall.c: Ditto. * gdb.hp/gdb.compat/xdb0.c: Ditto. * gdb.reverse/consecutive-reverse.c: Ditto. * gdb.reverse/sigall-reverse.c: Ditto. * gdb.reverse/until-reverse.c: Ditto. * gdb.reverse/watch-reverse.c: Ditto. * gdb.trace/actions.c: Ditto. * gdb.trace/circ.c: Ditto. * gdb.trace/collection.c: Ditto.
2011-09-082011-09-08 Pedro Alves <pedro@codesourcery.com>Pedro Alves1-11/+18
* gdb.base/annota1.exp, gdb.base/annota3.exp: Extract the inferior's pid and look for a core dump named core.$pid. Use `remote_file' commands on the host instead of hand coding shell commands on the build. * gdb.base/valgrind-db-attach.exp: Kill the program before finishing the test.
2011-04-27ChangeLog:Ulrich Weigand1-2/+2
* infrun.c (proceed): Do not single-step into signal delivery when stepping off a breakpoint location. (insert_step_resume_breakpoint_at_frame): Move prototype earlier. (insert_step_resume_breakpoint_at_caller): Likewise. (insert_step_resume_breakpoint_at_sal): Likewise. (insert_longjmp_resume_breakpoint): Likewise. testsuite/ChangeLog: * gdb.base/annota1.exp: Accept breakpoints-invalid annotation while delivering signal.
2011-01-01run copyright.sh for 2011.Joel Brobecker1-1/+1
2010-05-262010-05-25 Michael Snyder <msnyder@vmware.com>Michael Snyder1-143/+96
* gdb.ada/formatted_ref.exp: Replace send_gdb with gdb_test. * gdb.asm/asm-source.exp: Replace send_gdb with gdb_test. * gdb.base/a2-run.exp: Replace send_gdb with gdb_test. * gdb.base/all-bin.exp: Replace send_gdb with gdb_test. * gdb.base/annota1.exp: Replace send_gdb with gdb_test. * gdb.base/annota3.exp: Replace send_gdb with gdb_test. * gdb.base/assign.exp: Replace send_gdb with gdb_test. * gdb.base/attach.exp: Replace send_gdb with gdb_test. * gdb.base/bitfields.exp: Replace send_gdb with gdb_test. * gdb.base/bitfields2.exp: Replace send_gdb with gdb_test. * gdb.base/bitops.exp: Replace send_gdb with gdb_test.
2010-05-05Do not set prms_id/bug_id anymore.Joel Brobecker1-2/+0
2010-05-05 Joel Brobecker <brobecker@adacore.com> Remove the use of prms_id and bug_id throughout the testsuite.
2010-03-30 * gdb.base/annota1.exp (break handle_USR1): Make fail and pass textDoug Evans1-5/+5
match. (break printf): Ditto.
2010-01-01Update copyright year in most headers.Joel Brobecker1-2/+2
Automatic update by copyright.sh.
2009-10-06 * gdb.base/annota1.exp: Remove obsolete match_max increase.Pierre Muller1-6/+0
* gdb.base/annota3.exp: Idem. * gdb.base/maint.exp: Idem.
2009-07-13gdb/testsuite/Jan Kratochvil1-4/+3
Fix racy clashing of output files for gdb.base{1,2}/ parallel run. * gdb.base/annota1.exp (thread_test): Import global $testfile. Change the compilation target to match the testcase name. * gdb.base/sect-cmd.exp: Change the compilation target to match the testcase name. * a2-run.exp: Use for setup prepare_for_testing. Change the compilation target to match the testcase name. * gdb.base/commands.exp: Likewise. * gdb.base/finish.exp: Likewise. * gdb.base/float.exp: Likewise. * gdb.base/info-target.exp: Likewise. * gdb.base/relational.exp: Likewise. * gdb.base/term.exp: Likewise. * gdb.base/until.exp: Likewise. * gdb.base/volatile.exp: Likewise. * gdb.base/whatis-exp.exp: Likewise.
2009-06-17ChangeLog:Ulrich Weigand1-4/+4
* infrun.c (handle_inferior_event): Use current frame architecture or thread architecture instead of current_gdbarch. Pass to handle_step_into_function and handle_step_into_function_backward. (handle_step_into_function): Add GDBARCH parameter. Use it instead of current_gdbarch. (handle_step_into_function_backward): Likewise. (insert_step_resume_breakpoint_at_frame): Use frame architecture instead of current_gdbarch. (insert_step_resume_breakpoint_at_caller): Likewise. testsuite/ChangeLog: * gdb.base/annota1.exp: Allow multiple occurrences of the frames-invalid annotation. * gdb.cp/annota2.exp: Likewise.
2009-01-03 Updated copyright notices for most files.Joel Brobecker1-1/+1
2008-06-06(thread_switch): Test for thread-changed annotation.Nick Roberts1-0/+11
2008-05-20Test for new annotation.Nick Roberts1-0/+39
2008-05-16 * gdb.base/annota1.exp: Accept printf@... in place of printf.Ulrich Weigand1-2/+2
* gdb.base/annota3.exp: Likewise.
2008-02-28 * frame.c (reinit_frame_cache): Only annotate if frames wereDaniel Jacobowitz1-2/+2
previously valid. * gdb.base/annota1.exp, gdb.cp/annota2.exp: Update for fewer frames-invalid annotations.
2008-02-26 * breakpoint.c (print_one_breakpoint_location): Revert Enb fieldVladimir Prus1-2/+2
to old format. Discard breakpoint address if shared library is unloaded. (breakpoint_1): Adjust formatting of table header accordingly.
2008-01-01 Updated copyright notices for most files.Daniel Jacobowitz1-1/+1
2007-09-23 * breakpoint.h (enum enable_state): Remove theVladimir Prus1-2/+2
bp_shlib_disabled enumerator. (struct bp_location): New members shlib_disabled, global_next, enabled and function_name. Rename pending to condition_not_parsed. * breakpoint.c (ALL_BP_LOCATIONS): Iterate over global_next. (ALL_BP_LOCATIONS_SAFE): Likewise. (breakpoint_enabled): Don't check for pending. (condition_command): Free and update all locations of a breakpoint. (insert_bp_location): Adjust. (software_breakpoint_inserted_here_p): Don't care if breakpoint is enabled, as soon as it's inserted. (print_it_typical): Print bpstat's location, not bpstat's breakpoint's location. (bpstat_stop_status): Iterate over all locations, not all breakpoints. (print_breakpoint_location): New. (print_one_breakpoint): Renamed to (print_one_breakpoint_location): ...this. Take parameters to describe which location is being printed. Modify code to properly print header for several locations and individual locations. (print_one_breakpoint): Print all locations. (breakpoint_has_pc): New. (describe_other_breakpoints): Use the above. (check_duplicates): Renamed to... (check_duplicates_for): .. this. (check_duplicates): Use check_duplicates_for. (allocate_bp_location): Adjust. (set_raw_breakpoint_without_location): New, extracted from set_raw_breakpoint. (set_breakpoint_location_function): New. (set_raw_breakpoint): Use set_raw_breakpoint_without_location. (make_breakpoint_permanent): Mark all locations as inserted. (disable_breakpoints_in_shlibs): Iterate over locations. (disable_breakpoints_in_unloaded_shlib): Likewise. (re_enable_breakpoints_in_shlibs): Likewise. (mention): Say "pending" when breakpoint has zero locations. If breakpoint has more than one location, say so. (add_location_to_breakpoint): New. (create_breakpoint): Accept symtabs_and_lines, not symtab_and_line. Pass extra sals to add_location_to_breakpoint. (create_breakpoints): Pass symtabs_and_lines to create_breakpoints. (break_command_1): Make pending breakpoints have zero locations. (do_captured_breakpoint): Remove wrong allocation. (clear_command): Iterate over all locations. (unlink_locations_from_global_list): Renamed from unlink_location_from_global_list. Remove all locations. (delete_breakpoint): Remove all locations. Iterate over all locations when deciding which other location to re-enable. (all_locations_are_pending): New. (update_breakpoint_locations): Renamed from update_breakpoint_location. Try to match old and new locations using names of containing functions. (breakpoint_re_set_one): Adjust. (find_location_by_number): New. (disable_command): Allow disabling individual location. (enable_command): Allow enabling individual location. * breakpoint.c: Adjust all uses of breakpoint's enable state to for bp_shlib_disabled change.
2007-08-23 Switch the license of all .exp files to GPLv3.Joel Brobecker1-5/+4
Switch the license of all .f and .f90 files to GPLv3. Switch the license of all .s and .S files to GPLv3.
2007-01-10 * gdb.base/annota1.exp: Remove extra send_gdb.Daniel Jacobowitz1-1/+0
2007-01-09Copyright updates for 2007.Daniel Jacobowitz1-1/+1
2006-12-31 * gdb.base/annota1.exp: Allow .*printf in backtraces.Daniel Jacobowitz1-14/+17
* gdb.base/annota3.exp: Likewise. * gdb.base/sigstep.exp (advancei): Fail if we hit the breakpoint again (instead of timing out). * gdb.gdb/selftest.exp (do_steps_and_nexts): Add an XFAIL for GCC bug 26475. * gdb.java/jmisc.exp: Adjust to work with method signatures including return types. Add kfails for GDB bugs 2214 and 2215. Move exit test from jmisc1.exp. * gdb.java/jmisc1.exp: Delete. * gdb.java/jprint.exp: Adjust to work with method signatures including return types. * gdb.objc/basicclass.exp: Update for gobjc 4.1 debug info. * gdb.threads/linux-dp.exp: Don't be confused by program output. * lib/java.exp (compile_java_from_source): Pass the correct type to target_compile.
2006-10-12 * gdb.base/annota1.exp, gdb.base/maint.exp: Use string_to_regexp.Daniel Jacobowitz1-1/+2
2006-08-10 * gdb.arch/altivec-abi.exp: Replace gdb_suppress_entire_file withJoel Brobecker1-1/+2
untested followed by return combination. * gdb.arch/altivec-regs.exp: Likewise. * gdb.arch/e500-abi.exp: Likewise. * gdb.arch/e500-regs.exp: Likewise. * gdb.arch/gdb1291.exp: Likewise. * gdb.arch/gdb1431.exp: Likewise. * gdb.arch/gdb1558.exp: Likewise. * gdb.arch/i386-prologue.exp: Likewise. * gdb.arch/i386-unwind.exp: Likewise. * gdb.asm/asm-source.exp: Likewise. * gdb.base/a2-run.exp: Likewise. * gdb.base/advance.exp: Likewise. * gdb.base/all-bin.exp: Likewise. * gdb.base/annota1.exp: Likewise. * gdb.base/annota3.exp: Likewise. * gdb.base/args.exp: Likewise. * gdb.base/arithmet.exp: Likewise. * gdb.base/assign.exp: Likewise. * gdb.base/async.exp: Likewise. * gdb.base/attach.exp: Likewise. * gdb.base/bang.exp: Likewise. * gdb.base/bigcore.exp: Likewise. * gdb.base/bitfields.exp: Likewise. * gdb.base/bitfields2.exp: Likewise. * gdb.base/break.exp: Likewise. * gdb.base/call-sc.exp: Likewise. * gdb.base/call-strs.exp: Likewise. * gdb.base/callfuncs.exp: Likewise. * gdb.base/checkpoint.exp: Likewise. * gdb.base/chng-syms.exp: Likewise. * gdb.base/code-expr.exp: Likewise. * gdb.base/commands.exp: Likewise. * gdb.base/completion.exp: Likewise. * gdb.base/cond-expr.exp: Likewise. * gdb.base/condbreak.exp: Likewise. * gdb.base/consecutive.exp: Likewise. * gdb.base/constvars.exp: Likewise. * gdb.base/corefile.exp: Likewise. * gdb.base/cvexpr.exp: Likewise. * gdb.base/dbx.exp: Likewise. * gdb.base/define.exp: Likewise. * gdb.base/detach.exp: Likewise. * gdb.base/display.exp: Likewise. * gdb.base/dump.exp: Likewise. * gdb.base/ena-dis-br.exp: Likewise. * gdb.base/ending-run.exp: Likewise. * gdb.base/environ.exp: Likewise. * gdb.base/eval-skip.exp: Likewise. * gdb.base/exprs.exp: Likewise. * gdb.base/fileio.exp: Likewise. * gdb.base/finish.exp: Likewise. * gdb.base/float.exp: Likewise. * gdb.base/foll-exec.exp: Likewise. * gdb.base/foll-fork.exp: Likewise. * gdb.base/foll-vfork.exp: Likewise. * gdb.base/freebpcmd.exp: Likewise. * gdb.base/funcargs.exp: Likewise. * gdb.base/gcore.exp: Likewise. * gdb.base/gdb1090.exp: Likewise. * gdb.base/gdb1250.exp: Likewise. * gdb.base/huge.exp: Likewise. * gdb.base/info-proc.exp: Likewise. * gdb.base/interrupt.exp: Likewise. * gdb.base/jump.exp: Likewise. * gdb.base/langs.exp: Likewise. * gdb.base/lineinc.exp: Likewise. * gdb.base/list.exp: Likewise. * gdb.base/logical.exp: Likewise. * gdb.base/long_long.exp: Likewise. * gdb.base/macscp.exp: Likewise. * gdb.base/maint.exp: Likewise. * gdb.base/mips_pro.exp: Likewise. * gdb.base/miscexprs.exp: Likewise. * gdb.base/multi-forks.exp: Likewise. * gdb.base/opaque.exp: Likewise. * gdb.base/overlays.exp: Likewise. * gdb.base/pc-fp.exp: Likewise. * gdb.base/pointers.exp: Likewise. * gdb.base/printcmds.exp: Likewise. * gdb.base/psymtab.exp: Likewise. * gdb.base/ptype.exp: Likewise. * gdb.base/recurse.exp: Likewise. * gdb.base/relational.exp: Likewise. * gdb.base/relocate.exp: Likewise. * gdb.base/remote.exp: Likewise. * gdb.base/reread.exp: Likewise. * gdb.base/restore.exp: Likewise. * gdb.base/return.exp: Likewise. * gdb.base/return2.exp: Likewise. * gdb.base/scope.exp: Likewise. * gdb.base/sect-cmd.exp: Likewise. * gdb.base/sep.exp: Likewise. * gdb.base/sepdebug.exp: Likewise. * gdb.base/setshow.exp: Likewise. * gdb.base/setvar.exp: Likewise. * gdb.base/sigall.exp: Likewise. * gdb.base/sigbpt.exp: Likewise. * gdb.base/signals.exp: Likewise. * gdb.base/signull.exp: Likewise. * gdb.base/sizeof.exp: Likewise. * gdb.base/solib.exp: Likewise. * gdb.base/step-line.exp: Likewise. * gdb.base/step-test.exp: Likewise. * gdb.base/structs.exp: Likewise. * gdb.base/structs2.exp: Likewise. * gdb.base/term.exp: Likewise. * gdb.base/twice.exp: Likewise. * gdb.base/until.exp: Likewise. * gdb.base/varargs.exp: Likewise. * gdb.base/volatile.exp: Likewise. * gdb.base/watchpoint.exp: Likewise. * gdb.base/whatis-exp.exp: Likewise. * gdb.base/whatis.exp: Likewise. * gdb.cp/ambiguous.exp: Likewise. * gdb.cp/annota2.exp: Likewise. * gdb.cp/annota3.exp: Likewise. * gdb.cp/bool.exp: Likewise. * gdb.cp/breakpoint.exp: Likewise. * gdb.cp/casts.exp: Likewise. * gdb.cp/class2.exp: Likewise. * gdb.cp/classes.exp: Likewise. * gdb.cp/cplusfuncs.exp: Likewise. * gdb.cp/ctti.exp: Likewise. * gdb.cp/derivation.exp: Likewise. * gdb.cp/exception.exp: Likewise. * gdb.cp/gdb1355.exp: Likewise. * gdb.cp/hang.exp: Likewise. * gdb.cp/inherit.exp: Likewise. * gdb.cp/local.exp: Likewise. * gdb.cp/m-data.exp: Likewise. * gdb.cp/m-static.exp: Likewise. * gdb.cp/member-ptr.exp: Likewise. * gdb.cp/method.exp: Likewise. * gdb.cp/misc.exp: Likewise. * gdb.cp/namespace.exp: Likewise. * gdb.cp/overload.exp: Likewise. * gdb.cp/ovldbreak.exp: Likewise. * gdb.cp/pr-1023.exp: Likewise. * gdb.cp/pr-1210.exp: Likewise. * gdb.cp/pr-574.exp: Likewise. * gdb.cp/printmethod.exp: Likewise. * gdb.cp/psmang.exp: Likewise. * gdb.cp/ref-params.exp: Likewise. * gdb.cp/ref-types.exp: Likewise. * gdb.cp/rtti.exp: Likewise. * gdb.cp/templates.exp: Likewise. * gdb.cp/try_catch.exp: Likewise. * gdb.cp/userdef.exp: Likewise. * gdb.cp/virtfunc.exp: Likewise. * gdb.disasm/am33.exp: Likewise. * gdb.disasm/h8300s.exp: Likewise. * gdb.disasm/mn10300.exp: Likewise. * gdb.disasm/sh3.exp: Likewise. * gdb.disasm/t01_mov.exp: Likewise. * gdb.disasm/t02_mova.exp: Likewise. * gdb.disasm/t03_add.exp: Likewise. * gdb.disasm/t04_sub.exp: Likewise. * gdb.disasm/t05_cmp.exp: Likewise. * gdb.disasm/t06_ari2.exp: Likewise. * gdb.disasm/t07_ari3.exp: Likewise. * gdb.disasm/t08_or.exp: Likewise. * gdb.disasm/t09_xor.exp: Likewise. * gdb.disasm/t10_and.exp: Likewise. * gdb.disasm/t11_logs.exp: Likewise. * gdb.disasm/t12_bit.exp: Likewise. * gdb.disasm/t13_otr.exp: Likewise. * gdb.hp/gdb.aCC/optimize.exp: Likewise. * gdb.hp/gdb.aCC/watch-cmd.exp: Likewise. * gdb.hp/gdb.base-hp/callfwmall.exp: Likewise. * gdb.hp/gdb.base-hp/dollar.exp: Likewise. * gdb.hp/gdb.base-hp/hwwatchbus.exp: Likewise. * gdb.hp/gdb.base-hp/pxdb.exp: Likewise. * gdb.hp/gdb.base-hp/reg-pa64.exp: Likewise. * gdb.hp/gdb.base-hp/reg.exp: Likewise. * gdb.hp/gdb.base-hp/sized-enum.exp: Likewise. * gdb.hp/gdb.compat/xdb1.exp: Likewise. * gdb.hp/gdb.compat/xdb3.exp: Likewise. * gdb.hp/gdb.objdbg/objdbg01.exp: Likewise. * gdb.hp/gdb.objdbg/objdbg02.exp: Likewise. * gdb.hp/gdb.objdbg/objdbg03.exp: Likewise. * gdb.hp/gdb.objdbg/objdbg04.exp: Likewise. * gdb.mi/gdb701.exp: Likewise. * gdb.mi/gdb792.exp: Likewise. * gdb.mi/mi-basics.exp: Likewise. * gdb.mi/mi-break.exp: Likewise. * gdb.mi/mi-cli.exp: Likewise. * gdb.mi/mi-console.exp: Likewise. * gdb.mi/mi-disassemble.exp: Likewise. * gdb.mi/mi-eval.exp: Likewise. * gdb.mi/mi-file.exp: Likewise. * gdb.mi/mi-read-memory.exp: Likewise. * gdb.mi/mi-regs.exp: Likewise. * gdb.mi/mi-return.exp: Likewise. * gdb.mi/mi-simplerun.exp: Likewise. * gdb.mi/mi-stack.exp: Likewise. * gdb.mi/mi-stepi.exp: Likewise. * gdb.mi/mi-syn-frame.exp: Likewise. * gdb.mi/mi-until.exp: Likewise. * gdb.mi/mi-var-block.exp: Likewise. * gdb.mi/mi-var-child.exp: Likewise. * gdb.mi/mi-var-cmd.exp: Likewise. * gdb.mi/mi-var-display.exp: Likewise. * gdb.mi/mi-watch.exp: Likewise. * gdb.mi/mi2-basics.exp: Likewise. * gdb.mi/mi2-break.exp: Likewise. * gdb.mi/mi2-cli.exp: Likewise. * gdb.mi/mi2-console.exp: Likewise. * gdb.mi/mi2-disassemble.exp: Likewise. * gdb.mi/mi2-eval.exp: Likewise. * gdb.mi/mi2-file.exp: Likewise. * gdb.mi/mi2-read-memory.exp: Likewise. * gdb.mi/mi2-regs.exp: Likewise. * gdb.mi/mi2-return.exp: Likewise. * gdb.mi/mi2-simplerun.exp: Likewise. * gdb.mi/mi2-stack.exp: Likewise. * gdb.mi/mi2-stepi.exp: Likewise. * gdb.mi/mi2-syn-frame.exp: Likewise. * gdb.mi/mi2-until.exp: Likewise. * gdb.mi/mi2-var-block.exp: Likewise. * gdb.mi/mi2-var-child.exp: Likewise. * gdb.mi/mi2-var-cmd.exp: Likewise. * gdb.mi/mi2-var-display.exp: Likewise. * gdb.mi/mi2-watch.exp: Likewise. * gdb.stabs/exclfwd.exp: Likewise. * gdb.stabs/weird.exp: Likewise. * gdb.threads/gcore-thread.exp: Likewise. * gdb.trace/actions.exp: Likewise. * gdb.trace/backtrace.exp: Likewise. * gdb.trace/circ.exp: Likewise. * gdb.trace/collection.exp: Likewise. * gdb.trace/deltrace.exp: Likewise. * gdb.trace/infotrace.exp: Likewise. * gdb.trace/limits.exp: Likewise. * gdb.trace/packetlen.exp: Likewise. * gdb.trace/passc-dyn.exp: Likewise. * gdb.trace/passcount.exp: Likewise. * gdb.trace/report.exp: Likewise. * gdb.trace/save-trace.exp: Likewise. * gdb.trace/tfind.exp: Likewise. * gdb.trace/tracecmd.exp: Likewise. * gdb.trace/while-dyn.exp: Likewise. * gdb.trace/while-stepping.exp: Likewise.
2006-03-072006-03-07 Paul Brook <paul@codesourcery.com>Paul Brook1-1/+1
* gdb.arch/altivec-abi.exp: Use nowarnings instead of additional_flags=-w. * gdb.arch/altivec-regs.exp: Ditto. * gdb.arch/e500-abi.exp: Ditto. * gdb.arch/e500-regs.exp: Ditto. * gdb.base/all-bin.exp: Ditto. * gdb.base/annota1.exp: Ditto. * gdb.base/annota3.exp: Ditto. * gdb.base/args.exp: Ditto. * gdb.base/arithmet.exp: Ditto. * gdb.base/assign.exp: Ditto. * gdb.base/async.exp: Ditto. * gdb.base/bang.exp: Ditto. * gdb.base/break.exp: Ditto. * gdb.base/call-rt-st.exp: Ditto. * gdb.base/completion.exp: Ditto. * gdb.base/cond-expr.exp: Ditto. * gdb.base/condbreak.exp: Ditto. * gdb.base/consecutive.exp: Ditto. * gdb.base/define.exp: Ditto. * gdb.base/display.exp: Ditto. * gdb.base/ena-dis-br.exp: Ditto. * gdb.base/environ.exp: Ditto. * gdb.base/eval-skip.exp: Ditto. * gdb.base/info-proc.exp: Ditto. * gdb.base/jump.exp: Ditto. * gdb.base/logical.exp: Ditto. * gdb.base/long_long.exp: Ditto. * gdb.base/maint.exp: Ditto. * gdb.base/miscexprs.exp: Ditto. * gdb.base/pc-fp.exp: Ditto. * gdb.base/pointers.exp: Ditto. * gdb.base/relational.exp: Ditto. * gdb.base/reread.exp: Ditto. * gdb.base/sect-cmd.exp: Ditto. * gdb.base/sep.exp: Ditto. * gdb.base/sepdebug.exp: Ditto. * gdb.base/until.exp: Ditto. * gdb.base/whatis-exp.exp: Ditto. * gdb.cp/annota2.exp: Ditto. * gdb.cp/annota3.exp: Ditto. * gdb.trace/actions.exp: Ditto. * gdb.trace/backtrace.exp: Ditto. * gdb.trace/circ.exp: Ditto. * gdb.trace/collection.exp: Ditto. * gdb.trace/deltrace.exp: Ditto. * gdb.trace/infotrace.exp: Ditto. * gdb.trace/limits.exp: Ditto. * gdb.trace/packetlen.exp: Ditto. * gdb.trace/passc-dyn.exp: Ditto. * gdb.trace/passcount.exp: Ditto. * gdb.trace/report.exp: Ditto. * gdb.trace/save-trace.exp: Ditto. * gdb.trace/tfind.exp: Ditto. * gdb.trace/tracecmd.exp: Ditto. * gdb.trace/while-dyn.exp: Ditto. * gdb.trace/while-stepping.exp: Ditto. * lib/gdb.exp: Ditto. (gdb_compile): Handle nowarning option.
2005-04-272005-04-27 Paul Gilliam <pgilliam@us.ibm.com>Paul Gilliam1-1/+6
* gdb.base/annota1.exp : Deal with messages caused by breakpoints in shared objects being adjusted and update copyright.
2004-07-202004-07-19 Michael Chastain <mec.gnu@mindspring.com>Michael Chastain1-33/+43
Fix PR cli/740. * gdb.base/annota1.exp: Honor gdb,nosignals. * gdb.base/annota3.exp: Likewise.
generated by cgit v1.1 at 2025-02-03 11:06:55 +0000