| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This commit is the result of the following actions:
- Running gdb/copyright.py to update all of the copyright headers to
include 2024,
- Manually updating a few files the copyright.py script told me to
update, these files had copyright headers embedded within the
file,
- Regenerating gdbsupport/Makefile.in to refresh it's copyright
date,
- Using grep to find other files that still mentioned 2023. If
these files were updated last year from 2022 to 2023 then I've
updated them this year to 2024.
I'm sure I've probably missed some dates. Feel free to fix them up as
you spot them.
|
|
Remove this typedef. I think that hiding the real type (std::vector)
behind a typedef just hinders readability.
Change-Id: I80949da3392f60a2826c56c268e0ec6f503ad79f
Approved-By: Pedro Alves <pedro@palves.net>
Reviewed-By: Reviewed-By: Lancelot Six <lancelot.six@amd.com>
|
|
After the commit:
commit 6647f05df023b63bbe056e9167e9e234172fa2ca
Date: Tue Jan 24 18:13:38 2023 +0100
gdb: defer warnings when loading separate debug files
It was pointed out[1] that the warnings being deferred and then later
emitted lacked styling. The warnings lacked styling before the above
commit, but it was suggested that the filenames in these warnings
should be styled, and this commit does this.
There were a couple of previous attempts[2][3][4] to solve this
problem, but these all tried to extend the mechanism introduced in the
above commit, the deferred warnings were placed directly into a
std::vector, but now we tried to, when appropriate, style these
warnings. The review feedback that this approach looked too complex.
So instead, this revision adds a new helper class 'deferred_warnings'
which can be used to collect a set of deferred warnings, and then emit
these deferred warnings later, if needed. This helper class hides the
complexity, so at the point the deferred warning is created no extra
logic is required.
The deferred_warnings class will style the deferred warnings only if
gdb_stderr supports styling. GDB's warnings are sent to gdb_stderr,
so this should ensure we only style when expected.
There was also review feedback[5] that all of the warnings should be
bundled into a single string_file, this has not been done. I feel
pretty strongly that separate warnings should be emitted using
separate "warning" calls. If we do end up with multiple warnings in
this case they aren't really related, one will be about looking up
debug via .gnu_debuglink, while the other will be about build-id based
lookup. So I'd really rather keep the warnings separate.
[1] https://inbox.sourceware.org/gdb-patches/87edr9pcku.fsf@tromey.com/
[2] https://inbox.sourceware.org/gdb-patches/20230216195604.2685177-1-ahajkova@redhat.com/
[3] https://inbox.sourceware.org/gdb-patches/20230217123547.2737612-1-ahajkova@redhat.com/
[4] https://inbox.sourceware.org/gdb-patches/20230320145638.1202335-1-ahajkova@redhat.com/
[5] https://inbox.sourceware.org/gdb-patches/87o7nh1g8h.fsf@tromey.com/
Co-Authored-By: Alexandra Hájková <ahajkova@redhat.com>
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
PR gdb/29257 points out a possible double free when debuginfod is in
use. Aside from some ugly warts in the symbol code (an ongoing
issue), the underlying issue in this particular case is that elfread.c
seems to assume that symfile_bfd_open will return NULL on error,
whereas in reality it throws an exception. As this code isn't
prepared for an exception, bad things result.
This patch fixes the problem by introducing a non-throwing variant of
symfile_bfd_open and using it in the affected places.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29257
|
|
Currently, when GDB loads debug information from a separate debug
file, there are a couple of warnings that could be produced if things
go wrong.
In find_separate_debug_file_by_buildid (build-id.c) GDB can give a
warning if the separate debug file doesn't include any actual debug
information, and in separate_debug_file_exists (symfile.c) we can warn
if the CRC checksum in the separate debug file doesn't match the
checksum in the original executable.
The problem here is that, when looking up debug information, GDB will
try several different approaches, lookup by build-id, lookup by
debug-link, and then a lookup from debuginfod. GDB can potentially
give a warning from an earlier attempt, and then succeed with a later
attempt. In the cases I have run into this is primarily a warning
about some out of date debug information on my machine, but then GDB
finds the correct information using debuginfod. This can be confusing
to a user, they will see warnings from GDB when really everything is
working just fine.
For example:
warning: the debug information found in "/usr/lib/debug//lib64/ld-2.32.so.debug" \
does not match "/lib64/ld-linux-x86-64.so.2" (CRC mismatch).
This diagnostic was printed on Fedora 33 even when the correct
debuginfo was downloaded.
In this patch I propose that we defer any warnings related to looking
up debug information from a separate debug file. If any of the
approaches are successful then GDB will not print any of the warnings.
As far as the user is concerned, everything "just worked". Only if
GDB completely fails to find any suitable debug information will the
warnings be printed.
The crc_mismatch test compiles two executables: crc_mismatch and
crc_mismatch-2 and then strips them of debuginfo creating separate
debug files. The test then replaces crc_mismatch-2.debug with
crc_mismatch.debug to trigger "CRC mismatch" warning. A local
debuginfod server is setup to supply the correct debug file, now when
GDB looks up the debug info no warning is given.
The build-id-no-debug-warning.exp is similar to the previous test. It
triggers the "separate debug info file has no debug info" warning by
replacing the build-id based .debug file with the stripped binary and
then loading it to GDB. It then also sets up local debuginfod server
with the correct debug file to download to make sure no warnings are
emitted.
|
|
I noticed that pc_in_unmapped_range had a weird return type -- it was
returning a CORE_ADDR but intending to return a bool. This patch
changes all the pc_in_* functions to return bool instead.
|
|
This commit is the result of running the gdb/copyright.py script,
which automated the update of the copyright year range for all
source files managed by the GDB project to be updated to include
year 2023.
|
|
This changes GDB to use frame_info_ptr instead of frame_info *
The substitution was done with multiple sequential `sed` commands:
sed 's/^struct frame_info;/class frame_info_ptr;/'
sed 's/struct frame_info \*/frame_info_ptr /g' - which left some
issues in a few files, that were manually fixed.
sed 's/\<frame_info \*/frame_info_ptr /g'
sed 's/frame_info_ptr $/frame_info_ptr/g' - used to remove whitespace
problems.
The changed files were then manually checked and some 'sed' changes
undone, some constructors and some gets were added, according to what
made sense, and what Tromey originally did
Co-Authored-By: Bruno Larsen <blarsen@redhat.com>
Approved-by: Tom Tomey <tom@tromey.com>
|
|
This changes struct objfile to use a gdb_bfd_ref_ptr. In addition to
removing some manual memory management, this fixes a use-after-free
that was introduced by the registry rewrite series. The issue there
was that, in some cases, registry shutdown could refer to memory that
had already been freed. This help fix the bug by delaying the
destruction of the BFD reference (and thus the per-bfd object) until
after the registry has been shut down.
|
|
Printing macros defined in the main source file doesn't work reliably
using various toolchains, especially when DWARF 5 is used. For example,
using the binaries produced by either of these commands:
$ gcc --version
gcc (GCC) 11.2.0
$ ld --version
GNU ld (GNU Binutils) 2.38
$ gcc test.c -g3 -gdwarf-5
$ clang --version
clang version 13.0.1
$ clang test.c -gdwarf-5 -fdebug-macro
I get:
$ ./gdb -nx -q --data-directory=data-directory a.out
(gdb) start
Temporary breakpoint 1 at 0x111d: file test.c, line 6.
Starting program: /home/simark/build/binutils-gdb-one-target/gdb/a.out
Temporary breakpoint 1, main () at test.c:6
6 return ZERO;
(gdb) p ZERO
No symbol "ZERO" in current context.
When starting to investigate this (taking the gcc-compiled binary as an
example), we see that GDB fails to look up the appropriate macro scope
when evaluating the expression. While stopped in
macro_lookup_inclusion:
(top-gdb) p name
$1 = 0x62100011a980 "test.c"
(top-gdb) p source.filename
$2 = 0x62100011a9a0 "/home/simark/build/binutils-gdb-one-target/gdb/test.c"
`source` is the macro_source_file that we would expect GDB to find.
`name` comes from the symtab::filename field of the symtab we are
stopped in. GDB doesn't find the appropriate macro_source_file because
the name of the macro_source_file doesn't match exactly the name of the
symtab.
The name of the main symtab comes from the compilation unit's
DW_AT_name, passed to the buildsym_compunit's constructor:
https://gitlab.com/gnutools/binutils-gdb/-/blob/4815d6125ec580cc02a1094d61b8c9d1cc83c0a1/gdb/dwarf2/read.c#L10627-10630
The contents of DW_AT_name, in this case, is "test.c". It is typically
(what I witnessed all compilers do) the same string that was passed to
the compiler on the command-line.
The name of the macro_source_file comes from the line number program
header's file table, from the call to the line_header::file_file_name
method:
https://gitlab.com/gnutools/binutils-gdb/-/blob/4815d6125ec580cc02a1094d61b8c9d1cc83c0a1/gdb/dwarf2/macro.c#L54-65
line_header::file_file_name prepends the directory path that the file
entry refers to, in the file table (if the file name is not already
absolute). In this case, the file name is "test.c", appended to the
directory "/home/simark/build/binutils-gdb-one-target/gdb".
Because the symtab's name is not created the same way as the
macro_source_file's name is created, we get this mismatch. GDB fails to
find the appropriate macro scope for the symtab, and we can't print
macros when stopped in that symtab.
To make this work, we must ensure that paths produced in these two ways
end up identical. This can be tricky because of the different ways a
path can be passed to the compiler by the user.
Another thing to consider is that while the main symtab's name (or
subfile, before it becomes a symtab) is created using DW_AT_name, the
main symtab is also referred to using its entry in the line table
header's file table, when processing the line table. We must therefore
ensure that the same name is produced in both cases, so that a call to
"start_subfile" for the main subfile will correctly find the
already-created subfile, created by buildsym_compunit's constructor. If
we fail to do that, things still often work, because of a fallback: the
watch_main_source_file_lossage method. This method determines that if
the main subfile has no symbols but there exists another subfile with
the same basename (e.g. "test.c") that does have symbols, it's probably
because there was some filename mismatch. So it replaces the main
subfile with that other subfile. I think that heuristic is useful as a
last effort to work around any bug or bad debug info, but I don't think
we should design things such as to rely on it. It's a heuristic, it can
get things wrong. So in my search for a fix, it is important that given
some good debug info, we don't end up relying on that for things to
work.
A first attempt at fixing this was to try to prepend the compilation
directory here or not prepend it there. In practice, because of all the
possible combinations of debug info the compilers produce, it was not
possible to get something that would produce reliable, consistent paths.
Another attempt at fixing this was to make both macro_source_file
objects and symtab objects use the most complete form of path possible.
That means to prepend directories at least until we get an absolute
path. In theory, we should end up with the same path in all cases.
This generally worked, but because it changed the symtab names, it
resulted in user-visible changes (for example, paths to source files in
Breakpoint hit messages becoming always absolute). I didn't find this
very good, first because there is a "set filename-display" setting that
lets the user control how they want the paths to be displayed, and that
would suddenly make this setting completely ineffective (although even
today, it is a bit dependent on the debug info). Second, it would
require a good amount of testsuite tweaks to make tests accept these
suddenly absolute paths.
This new patch is a slight variation of that: it adds a new field called
"filename_for_id" in struct symtab and struct subfile, next to the
existing filename field. The goal is to separate the internal ids used
for finding objects from the names used for presentation. This field is
used for identifying subfiles, symtabs and macro_source_files
internally. For DWARF symtabs, this new field is meant to contain the
"most complete possible" path, as discussed above. So for a given file,
it must always be in the same form, everywhere. The existing
symtab::filename field remains the one used for printing to the user, so
there shouldn't be any change in how paths are printed.
Changes in the core symtab files are:
- Add "name_for_id" and "filename_for_id" fields to "struct subfile"
and "struct symtab", next to existing "name" and "filename" fields.
- Make buildsym_compunit::buildsym_compunit and
buildsym_compunit::start_subfile accept a "name_for_id" parameter
next to the existing "name" ones.
- Make buildsym_compunit::start_subfile use "name_for_id" for looking
up existing subfiles. This is the key thing for making calls
to start_subfile for the main source file look up the existing
subfile successfully, and avoid relying on
watch_main_source_file_lossage.
- Make sal_macro_scope pass "filename_for_id", rather than "filename",
to macro_lookup_inclusion. This is the key thing to making the
lookup work and macro printing work.
Changes in the DWARF files are:
- Make line_header::file_file_name return the "most complete possible"
name. The only pre-existing user of this method is the macro code,
to give the macro_source_file objects their name. And we now want
them to have this "most complete possible" name, which will match the
corresponding symtab's "filename_for_id".
- Make dwarf2_cu::start_compunit_symtab pass the "most complete
possible" name for the main symtab's "filename_for_id". In this
context, where the info comes from the compilation unit's DW_AT_name
/ DW_AT_comp_dir, it means prepending DW_AT_comp_dir to DW_AT_name if
DW_AT_name is not already absolute.
- Change dwarf2_start_subfile to build a name_for_id for the subfile
being started. The simplest way is to re-use
line_header::file_file_name, since the callers always have a
file_entry handy. This ensures that it will get the exact same path
representation as the macro code does, for the same file (since it
also uses line_header::file_file_name).
- Update calls to allocate_symtab to pass the "name_for_id" from the
subfile.
Tests exercising all this are added by the following patch.
Of all the cases I tried, the only one I found that ends up relying on
watch_main_source_file_lossage is the following one:
$ clang --version
clang version 13.0.1
Target: x86_64-pc-linux-gnu
Thread model: posix
InstalledDir: /usr/bin
$ clang ./test.c -g3 -O0 -gdwarf-4
$ ./gdb -nx --data-directory=data-directory -q -readnow -iex "set debug symtab-create 1" a.out
...
[symtab-create] start_subfile: name = test.c, name_for_id = /home/simark/build/binutils-gdb-one-target/gdb/test.c
[symtab-create] start_subfile: name = ./test.c, name_for_id = /home/simark/build/binutils-gdb-one-target/gdb/./test.c
[symtab-create] start_subfile: name = ./test.c, name_for_id = /home/simark/build/binutils-gdb-one-target/gdb/./test.c
[symtab-create] start_subfile: found existing symtab with name_for_id /home/simark/build/binutils-gdb-one-target/gdb/./test.c (/home/simark/build/binutils-gdb-one-target/gdb/./test.c)
[symtab-create] watch_main_source_file_lossage: using subfile ./test.c as the main subfile
As we can see, there are two forms used for "test.c", one with a "." and
one without. This comes from the fact that the compilation unit DIE
contains:
DW_AT_name ("test.c")
DW_AT_comp_dir ("/home/simark/build/binutils-gdb-one-target/gdb")
without a ".", and the line table for that file contains:
include_directories[ 1] = "."
file_names[ 1]:
name: "test.c"
dir_index: 1
When assembling the filename from that entry, we get a ".".
It is a bit unexpected that the main filename resulting from the line
table header does not match exactly the name in the compilation unit.
For instance, gcc uses "./test.c" for the DW_AT_name, which gives
identical paths in the compilation unit and in the line table header.
Similarly, with DWARF 5:
$ clang ./test.c -g3 -O0 -gdwarf-5
clang create two entries that refer to the same file but are of in a different
form.
include_directories[ 0] = "/home/simark/build/binutils-gdb-one-target/gdb"
include_directories[ 1] = "."
file_names[ 0]:
name: "test.c"
dir_index: 0
file_names[ 1]:
name: "test.c"
dir_index: 1
The first file name produces a path without a "." while the second does.
This is not caught by watch_main_source_file_lossage, because of
dwarf_decode_lines that creates a symtab for each file entry in the line
table. It therefore appears as "non-empty" to
watch_main_source_file_lossage. This results in two symtabs:
(gdb) maintenance info symtabs
{ objfile /home/simark/build/binutils-gdb-one-target/gdb/a.out ((struct objfile *) 0x613000005d00)
{ ((struct compunit_symtab *) 0x62100011aca0)
debugformat DWARF 5
producer clang version 13.0.1
name test.c
dirname /home/simark/build/binutils-gdb-one-target/gdb
blockvector ((struct blockvector *) 0x621000129ec0)
user ((struct compunit_symtab *) (null))
{ symtab test.c ((struct symtab *) 0x62100011ad20)
fullname (null)
linetable ((struct linetable *) 0x0)
}
{ symtab ./test.c ((struct symtab *) 0x62100011ad60)
fullname (null)
linetable ((struct linetable *) 0x621000129ef0)
}
}
}
I am not sure what is the consequence of this, but this is also what
happens before my patch, so I think its acceptable to leave it as-is.
To handle these two cases nicely, I think we will need a function that
removes the unnecessary "." from path names, something that can be done
later.
Finally, I made a change in find_file_and_directory is necessary to
avoid breaking test
gdb.dwarf2/dw2-compdir-oldgcc.exp: info source gcc42
Without that change, we would get:
(gdb) info source
Current source file is /dir/d/dw2-compdir-oldgcc42.S
Compilation directory is /dir/d
whereas the expected result is:
(gdb) info source
Current source file is dw2-compdir-oldgcc42.S
Compilation directory is /dir/d
This test was added here:
https://sourceware.org/pipermail/gdb-patches/2012-November/098144.html
Long story short, GCC <= 4.2 apparently had a bug where it would
generate a DW_AT_name with a full path ("/dir/d/dw2-compdir-oldgcc42.S")
and no DW_AT_comp_dir. The line table has one entry with filename
"dw2-compdir-oldgcc42.S", which refers to directory 0. Directory 0
normally refers to the compilation unit's comp dir, but it is
non-existent in this case.
This caused some symtab lookup problems, and to work around them, some
workaround was added, which today reads as:
if (res.get_comp_dir () == nullptr
&& producer_is_gcc_lt_4_3 (cu)
&& res.get_name () != nullptr
&& IS_ABSOLUTE_PATH (res.get_name ()))
res.set_comp_dir (ldirname (res.get_name ()));
Source: https://gitlab.com/gnutools/binutils-gdb/-/blob/6577f365ebdee7dda71cb996efa29d3714cbccd0/gdb/dwarf2/read.c#L9428-9432
It extracts an artificial DW_AT_comp_dir from DW_AT_name, if there is no
DW_AT_comp_dir and DW_AT_name is absolute.
Prior to my patch, a subfile would get created with filename
"/dir/d/dw2-compdir-oldgcc42.S", from DW_AT_name, and another would get
created with filename "dw2-compdir-oldgcc42.S" from the line table's
file table. Then watch_main_source_file_lossage would kick in and merge
them, keeping only the "dw2-compdir-oldgcc42.S" one:
[symtab-create] start_subfile: name = /dir/d/dw2-compdir-oldgcc42.S
[symtab-create] start_subfile: name = dw2-compdir-oldgcc42.S
[symtab-create] start_subfile: name = dw2-compdir-oldgcc42.S
[symtab-create] start_subfile: found existing symtab with name dw2-compdir-oldgcc42.S (dw2-compdir-oldgcc42.S)
[symtab-create] watch_main_source_file_lossage: using subfile dw2-compdir-oldgcc42.S as the main subfile
And so "info source" would show "dw2-compdir-oldgcc42.S" as the
filename.
With my patch applied, but without the change in
find_file_and_directory, both DW_AT_name and the line table would try to
start a subfile with the same filename_for_id, and there was no need for
watch_main_source_file_lossage - which is what we want:
[symtab-create] start_subfile: name = /dir/d/dw2-compdir-oldgcc42.S, name_for_id = /dir/d/dw2-compdir-oldgcc42.S
[symtab-create] start_subfile: name = dw2-compdir-oldgcc42.S, name_for_id = /dir/d/dw2-compdir-oldgcc42.S
[symtab-create] start_subfile: found existing symtab with name_for_id /dir/d/dw2-compdir-oldgcc42.S (/dir/d/dw2-compdir-oldgcc42.S)
[symtab-create] start_subfile: name = dw2-compdir-oldgcc42.S, name_for_id = /dir/d/dw2-compdir-oldgcc42.S
[symtab-create] start_subfile: found existing symtab with name_for_id /dir/d/dw2-compdir-oldgcc42.S (/dir/d/dw2-compdir-oldgcc42.S)
But since the one with name == "/dir/d/dw2-compdir-oldgcc42.S", coming
from DW_AT_name, gets created first, it wins, and the symtab ends up
with "/dir/d/dw2-compdir-oldgcc42.S" as the name, "info source" shows
"/dir/d/dw2-compdir-oldgcc42.S" and the test breaks.
This is not wrong per-se, after all DW_AT_name is
"/dir/d/dw2-compdir-oldgcc42.S", so it wouldn't be wrong to report the
current source file as "/dir/d/dw2-compdir-oldgcc42.S". If you compile
a file passing "/an/absolute/path.c", DW_AT_name typically contains (at
least with GCC) "/an/absolute/path.c" and GDB tells you that the source
file is "/an/absolute/path.c". But we can also keep the existing
behavior fairly easily with a little change in find_file_and_directory.
When extracting an artificial DW_AT_comp_dir from DW_AT_name, we now
modify the name to just keep the file part. The result is coherent with
what compilers do when you compile a file by just passing its filename
("gcc path.c -g"):
DW_AT_name ("path.c")
DW_AT_comp_dir ("/home/simark/build/binutils-gdb-one-target/gdb")
With this change, filename_for_id is still the full name,
"/dir/d/dw2-compdir-oldgcc42.S", but the filename of the subfile /
symtab (what ends up shown by "info source") is just
"dw2-compdir-oldgcc42.S", and that makes the test happy.
Change-Id: I8b5cc4bb3052afdb172ee815c051187290566307
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
This adds a block search flags parameter to expand_symtabs_matching.
All callers are updated to search both the static and global blocks,
as that was the implied behavior before this patch.
This is a step toward replacing lookup_symbol with
expand_symtabs_matching.
gdb/ChangeLog
2021-04-17 Tom Tromey <tom@tromey.com>
* symtab.c (global_symbol_searcher::expand_symtabs)
(default_collect_symbol_completion_matches_break_on): Update.
* symmisc.c (maintenance_expand_symtabs): Update.
* symfile.h (expand_symtabs_matching): Add search_flags
parameter.
* symfile.c (expand_symtabs_matching): Add search_flags
parameter.
* symfile-debug.c (objfile::expand_symtabs_matching): Add
search_flags parameter.
* quick-symbol.h (struct quick_symbol_functions)
<expand_symtabs_matching>: Add search_flags parameter.
* python/py-symbol.c (gdbpy_lookup_static_symbols): Update.
* psymtab.c (recursively_search_psymtabs)
(psymbol_functions::expand_symtabs_matching): Add search_flags
parameter.
* psympriv.h (struct psymbol_functions) <expand_symtabs_matching>:
Add search_flags parameter.
* objfiles.h (struct objfile) <expand_symtabs_matching>: Add
search_flags parameter.
* linespec.c (iterate_over_all_matching_symtabs): Update.
* dwarf2/read.c (struct dwarf2_gdb_index)
<expand_symtabs_matching>: Add search_flags parameter.
(struct dwarf2_debug_names_index) <expand_symtabs_matching>: Add
search_flags parameter.
(dw2_map_matching_symbols): Update.
(dw2_expand_marked_cus, dw2_expand_symtabs_matching)
(dwarf2_gdb_index::expand_symtabs_matching): Add search_flags
parameter.
(dw2_debug_names_iterator): Change block_index to search flags.
<m_block_index>: Likewise.
(dw2_debug_names_iterator::next)
(dwarf2_debug_names_index::lookup_symbol)
(dwarf2_debug_names_index::expand_symtabs_for_function)
(dwarf2_debug_names_index::map_matching_symbols)
(dwarf2_debug_names_index::map_matching_symbols): Update.
(dwarf2_debug_names_index::expand_symtabs_matching): Add
search_flags parameter.
* ada-lang.c (ada_add_global_exceptions)
(collect_symbol_completion_matches): Update.
|
|
This changes expand_symtabs_exp_notify_ftype to return bool, and
updates all the uses. Now, if the notification function returns
false, the call is short-circuited and stops examining symtabs. This
is a step toward replacing map_symtabs_matching_filename with
expand_symtabs_matching.
gdb/ChangeLog
2021-04-17 Tom Tromey <tom@tromey.com>
* symtab.c (default_collect_symbol_completion_matches_break_on):
Update.
* symfile.h (expand_symtabs_matching): Return bool.
* symfile.c (expand_symtabs_matching): Return bool.
* symfile-debug.c (objfile::expand_symtabs_matching): Return
bool.
* quick-symbol.h (expand_symtabs_exp_notify_ftype): Return bool.
(struct quick_symbol_functions) <expand_symtabs_matching>: Return
bool.
* psymtab.c (psymbol_functions::expand_symtabs_matching): Return
bool.
* psympriv.h (struct psymbol_functions)
<expand_symtabs_matching>: Return bool.
* objfiles.h (struct objfile) <expand_symtabs_matching>: Return
bool.
* dwarf2/read.c (struct dwarf2_gdb_index)
<expand_symtabs_matching>: Return bool.
(struct dwarf2_debug_names_index) <expand_symtabs_matching>:
Return bool.
(dw2_expand_symtabs_matching_symbol): Return bool.
(dw2_expand_symtabs_matching_one, dw2_expand_marked_cus)
(dw2_expand_symtabs_matching)
(dwarf2_gdb_index::expand_symtabs_matching)
(dwarf2_debug_names_index::expand_symtabs_matching)
(dwarf2_debug_names_index::expand_symtabs_matching): Return bool.
|
|
This changes quick_symbol_functions::map_symbol_filenames to use a
function_view, and updates all the uses. It also changes the final
parameter to 'bool'. A couple of spots are further updated to use
operator() rather than a lambda.
gdb/ChangeLog
2021-03-26 Tom Tromey <tom@tromey.com>
* symtab.c (struct output_source_filename_data): Add 'output'
method and operator().
(output_source_filename_data::output): Rename from
output_source_filename.
(output_partial_symbol_filename): Remove.
(info_sources_command): Update.
(struct add_partial_filename_data): Add operator().
(add_partial_filename_data::operator()): Rename from
maybe_add_partial_symtab_filename.
(make_source_files_completion_list): Update.
* symfile.c (quick_symbol_functions): Update.
* symfile-debug.c (objfile::map_symbol_filenames): Update.
* quick-symbol.h (symbol_filename_ftype): Change type of 'fun' and
'need_fullname'. Remove 'data' parameter.
(struct quick_symbol_functions) <map_symbol_filenames>: Likewise.
* psymtab.c (psymbol_functions::map_symbol_filenames): Update.
* psympriv.h (struct psymbol_functions) <map_symbol_filenames>:
Change type of 'fun' and 'need_fullname'. Remove 'data'
parameter.
* objfiles.h (struct objfile) <map_symbol_filenames>: Change type
of 'fun' and 'need_fullname'. Remove 'data' parameter.
* mi/mi-cmd-file.c (print_partial_file_name): Remove 'ignore'
parameter.
(mi_cmd_file_list_exec_source_files): Update.
* dwarf2/read.c
(dwarf2_base_index_functions::map_symbol_filenames): Update.
|
|
Partial symbols are read via the sym_fns::sym_read_psymbols function
pointer. In order to separate the partial symbols from the objfile,
this must instead be done via a virtual method on
quick_symbol_functions. This patch implements this change.
gdb/ChangeLog
2021-03-20 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_sym_fns): Update.
* symfile.h (struct sym_fns) <sym_read_psymbols>: Remove.
* symfile-debug.c (objfile::has_partial_symbols): Use
can_lazily_read_symbols.
(debug_sym_read_psymbols): Remove.
(debug_sym_fns, install_symfile_debug_logging): Update.
* quick-symbol.h (struct quick_symbol_functions)
<can_lazily_read_symbols, read_partial_symbols>: New methods.
* psymtab.c (require_partial_symbols): Use new 'qf' methods.
* mipsread.c (ecoff_sym_fns): Update.
* machoread.c (macho_sym_fns): Update.
* elfread.c (struct lazy_dwarf_reader): New.
(elf_symfile_read): Update.
(read_psyms): Now a method of lazy_dwarf_reader.
(elf_sym_fns): Update.
(elf_sym_fns_lazy_psyms): Remove.
* dbxread.c (aout_sym_fns): Update.
* coffread.c (coff_sym_fns): Update.
|
|
Currently the "partial" symbol reader is attached to the objfile's
symbol functions. However, in order to allow multiple separate
partial symbol readers, this association must be changed. This patch
moves the "qf" member out of sym_fns as a step toward that goal.
gdb/ChangeLog
2021-03-20 Tom Tromey <tom@tromey.com>
* psymtab.c (require_partial_symbols): Check that 'sf' is not
null.
* xcoffread.c (xcoff_sym_fns): Update.
* symfile.h (struct sym_fns) <qf>: Remove.
* symfile.c (syms_from_objfile_1, reread_symbols): Update.
* symfile-debug.c (objfile::has_partial_symbols)
(objfile::find_last_source_symtab)
(objfile::forget_cached_source_info)
(objfile::map_symtabs_matching_filename, objfile::lookup_symbol)
(objfile::print_stats, objfile::dump)
(objfile::expand_symtabs_for_function)
(objfile::expand_all_symtabs)
(objfile::expand_symtabs_with_fullname)
(objfile::map_matching_symbols)
(objfile::expand_symtabs_matching)
(objfile::find_pc_sect_compunit_symtab)
(objfile::map_symbol_filenames)
(objfile::find_compunit_symtab_by_address)
(objfile::lookup_global_symbol_language, debug_sym_fns)
(install_symfile_debug_logging): Update.
* objfiles.h (struct objfile) <qf>: New member.
* mipsread.c (ecoff_sym_fns): Update.
* machoread.c (macho_sym_fns): Update.
* elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_debug_names):
Don't declare.
(elf_symfile_read, elf_sym_fns, elf_sym_fns_lazy_psyms): Update.
* dbxread.c (aout_sym_fns): Update.
* coffread.c (coff_sym_fns): Update.
|
|
This introduces a new header, quick-symbol.h, and moves
quick_symbol_functions and related typedefs into it.
gdb/ChangeLog
2021-03-20 Tom Tromey <tom@tromey.com>
* symfile.h (symbol_compare_ftype, symbol_filename_ftype)
(expand_symtabs_file_matcher_ftype)
(expand_symtabs_symbol_matcher_ftype)
(expand_symtabs_exp_notify_ftype, struct quick_symbol_functions):
Move to quick-symbol.h.
* quick-symbol.h: New file.
|
|
This changes objfile::has_partial_symbols and
quick_symbol_functions::has_symbols to return bool.
gdb/ChangeLog
2021-03-20 Tom Tromey <tom@tromey.com>
* objfiles.h (struct objfile) <has_partial_symbols>: Return bool.
* symfile.h (struct quick_symbol_functions) <has_symbols>: Return
bool.
* symfile-debug.c (debug_qf_has_symbols): Return bool.
* psymtab.c (psym_has_symbols): Return bool.
* objfiles.c (objfile::has_partial_symbols): Return bool.
* dwarf2/read.c (dw2_has_symbols): Return bool.
|
|
This moves some more DWARF code out of symfile.h and into a new
header, dwarf2/public.h. This header is intended to describe the
public API of the DWARF reader.
gdb/ChangeLog
2021-03-20 Tom Tromey <tom@tromey.com>
* coffread.c: Include dwarf2/public.h.
* dwarf2/frame.c: Include dwarf2/public.h.
* dwarf2/index-write.h: Include dwarf2/public.h, not symfile.h.
* dwarf2/public.h: New file.
* dwarf2/read.c: Include dwarf2/public.h.
* elfread.c: Include dwarf2/public.h.
* machoread.c: Include dwarf2/public.h.
* symfile.h (dwarf2_has_info, enum dw_index_kind)
(dwarf2_initialize_objfile, dwarf2_build_psymtabs)
(dwarf2_build_frame_info): Move to dwarf2/public.h.
* xcoffread.c: Include dwarf2/public.h.
|
|
This moves a bit of the DWARF-specific code out of symfile.h and into
dwarf2/read.h.
gdb/ChangeLog
2021-03-20 Tom Tromey <tom@tromey.com>
* symfile.h (enum dwarf2_section_enum)
(dwarf2_get_section_info): Move to dwarf2/read.h.
* dwarf2/read.h (enum dwarf2_section_enum)
(dwarf2_get_section_info): Move from symfile.h.
|
|
This creates a new file, dwarf2/sect-names.h, and moves some
DWARF-specific type definitions from symfile.h into it.
gdb/ChangeLog
2021-03-06 Tom Tromey <tom@tromey.com>
* xcoffread.c: Include sect-names.h.
* symfile.h (struct dwarf2_section_names, struct
dwarf2_debug_sections): Move to dwarf2/sect-names.h.
* dwarf2/sect-names.h: New file, from symfile.h.
* dwarf2/read.c: Include sect-names.h.
|
|
... since they are defined in symfile.c.
gdb/ChangeLog:
* top.h (readnow_symbol_files, readnever_symbol_files): Move
declarations to ...
* symfile.h: ... here.
* symfile.c: Update doc.
Change-Id: Ie35a80d236bea70947bc496f66f62c8c621670b4
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
Many spots incorrectly use only spaces for indentation (for example,
there are a lot of spots in ada-lang.c). I've always found it awkward
when I needed to edit one of these spots: do I keep the original wrong
indentation, or do I fix it? What if the lines around it are also
wrong, do I fix them too? I probably don't want to fix them in the same
patch, to avoid adding noise to my patch.
So I propose to fix as much as possible once and for all (hopefully).
One typical counter argument for this is that it makes code archeology
more difficult, because git-blame will show this commit as the last
change for these lines. My counter counter argument is: when
git-blaming, you often need to do "blame the file at the parent commit"
anyway, to go past some other refactor that touched the line you are
interested in, but is not the change you are looking for. So you
already need a somewhat efficient way to do this.
Using some interactive tool, rather than plain git-blame, makes this
trivial. For example, I use "tig blame <file>", where going back past
the commit that changed the currently selected line is one keystroke.
It looks like Magit in Emacs does it too (though I've never used it).
Web viewers of Github and Gitlab do it too. My point is that it won't
really make archeology more difficult.
The other typical counter argument is that it will cause conflicts with
existing patches. That's true... but it's a one time cost, and those
are not conflicts that are difficult to resolve. I have also tried "git
rebase --ignore-whitespace", it seems to work well. Although that will
re-introduce the faulty indentation, so one needs to take care of fixing
the indentation in the patch after that (which is easy).
gdb/ChangeLog:
* aarch64-linux-tdep.c: Fix indentation.
* aarch64-ravenscar-thread.c: Fix indentation.
* aarch64-tdep.c: Fix indentation.
* aarch64-tdep.h: Fix indentation.
* ada-lang.c: Fix indentation.
* ada-lang.h: Fix indentation.
* ada-tasks.c: Fix indentation.
* ada-typeprint.c: Fix indentation.
* ada-valprint.c: Fix indentation.
* ada-varobj.c: Fix indentation.
* addrmap.c: Fix indentation.
* addrmap.h: Fix indentation.
* agent.c: Fix indentation.
* aix-thread.c: Fix indentation.
* alpha-bsd-nat.c: Fix indentation.
* alpha-linux-tdep.c: Fix indentation.
* alpha-mdebug-tdep.c: Fix indentation.
* alpha-nbsd-tdep.c: Fix indentation.
* alpha-obsd-tdep.c: Fix indentation.
* alpha-tdep.c: Fix indentation.
* amd64-bsd-nat.c: Fix indentation.
* amd64-darwin-tdep.c: Fix indentation.
* amd64-linux-nat.c: Fix indentation.
* amd64-linux-tdep.c: Fix indentation.
* amd64-nat.c: Fix indentation.
* amd64-obsd-tdep.c: Fix indentation.
* amd64-tdep.c: Fix indentation.
* amd64-windows-tdep.c: Fix indentation.
* annotate.c: Fix indentation.
* arc-tdep.c: Fix indentation.
* arch-utils.c: Fix indentation.
* arch/arm-get-next-pcs.c: Fix indentation.
* arch/arm.c: Fix indentation.
* arm-linux-nat.c: Fix indentation.
* arm-linux-tdep.c: Fix indentation.
* arm-nbsd-tdep.c: Fix indentation.
* arm-pikeos-tdep.c: Fix indentation.
* arm-tdep.c: Fix indentation.
* arm-tdep.h: Fix indentation.
* arm-wince-tdep.c: Fix indentation.
* auto-load.c: Fix indentation.
* auxv.c: Fix indentation.
* avr-tdep.c: Fix indentation.
* ax-gdb.c: Fix indentation.
* ax-general.c: Fix indentation.
* bfin-linux-tdep.c: Fix indentation.
* block.c: Fix indentation.
* block.h: Fix indentation.
* blockframe.c: Fix indentation.
* bpf-tdep.c: Fix indentation.
* break-catch-sig.c: Fix indentation.
* break-catch-syscall.c: Fix indentation.
* break-catch-throw.c: Fix indentation.
* breakpoint.c: Fix indentation.
* breakpoint.h: Fix indentation.
* bsd-uthread.c: Fix indentation.
* btrace.c: Fix indentation.
* build-id.c: Fix indentation.
* buildsym-legacy.h: Fix indentation.
* buildsym.c: Fix indentation.
* c-typeprint.c: Fix indentation.
* c-valprint.c: Fix indentation.
* c-varobj.c: Fix indentation.
* charset.c: Fix indentation.
* cli/cli-cmds.c: Fix indentation.
* cli/cli-decode.c: Fix indentation.
* cli/cli-decode.h: Fix indentation.
* cli/cli-script.c: Fix indentation.
* cli/cli-setshow.c: Fix indentation.
* coff-pe-read.c: Fix indentation.
* coffread.c: Fix indentation.
* compile/compile-cplus-types.c: Fix indentation.
* compile/compile-object-load.c: Fix indentation.
* compile/compile-object-run.c: Fix indentation.
* completer.c: Fix indentation.
* corefile.c: Fix indentation.
* corelow.c: Fix indentation.
* cp-abi.h: Fix indentation.
* cp-namespace.c: Fix indentation.
* cp-support.c: Fix indentation.
* cp-valprint.c: Fix indentation.
* cris-linux-tdep.c: Fix indentation.
* cris-tdep.c: Fix indentation.
* darwin-nat-info.c: Fix indentation.
* darwin-nat.c: Fix indentation.
* darwin-nat.h: Fix indentation.
* dbxread.c: Fix indentation.
* dcache.c: Fix indentation.
* disasm.c: Fix indentation.
* dtrace-probe.c: Fix indentation.
* dwarf2/abbrev.c: Fix indentation.
* dwarf2/attribute.c: Fix indentation.
* dwarf2/expr.c: Fix indentation.
* dwarf2/frame.c: Fix indentation.
* dwarf2/index-cache.c: Fix indentation.
* dwarf2/index-write.c: Fix indentation.
* dwarf2/line-header.c: Fix indentation.
* dwarf2/loc.c: Fix indentation.
* dwarf2/macro.c: Fix indentation.
* dwarf2/read.c: Fix indentation.
* dwarf2/read.h: Fix indentation.
* elfread.c: Fix indentation.
* eval.c: Fix indentation.
* event-top.c: Fix indentation.
* exec.c: Fix indentation.
* exec.h: Fix indentation.
* expprint.c: Fix indentation.
* f-lang.c: Fix indentation.
* f-typeprint.c: Fix indentation.
* f-valprint.c: Fix indentation.
* fbsd-nat.c: Fix indentation.
* fbsd-tdep.c: Fix indentation.
* findvar.c: Fix indentation.
* fork-child.c: Fix indentation.
* frame-unwind.c: Fix indentation.
* frame-unwind.h: Fix indentation.
* frame.c: Fix indentation.
* frv-linux-tdep.c: Fix indentation.
* frv-tdep.c: Fix indentation.
* frv-tdep.h: Fix indentation.
* ft32-tdep.c: Fix indentation.
* gcore.c: Fix indentation.
* gdb_bfd.c: Fix indentation.
* gdbarch.sh: Fix indentation.
* gdbarch.c: Re-generate
* gdbarch.h: Re-generate.
* gdbcore.h: Fix indentation.
* gdbthread.h: Fix indentation.
* gdbtypes.c: Fix indentation.
* gdbtypes.h: Fix indentation.
* glibc-tdep.c: Fix indentation.
* gnu-nat.c: Fix indentation.
* gnu-nat.h: Fix indentation.
* gnu-v2-abi.c: Fix indentation.
* gnu-v3-abi.c: Fix indentation.
* go32-nat.c: Fix indentation.
* guile/guile-internal.h: Fix indentation.
* guile/scm-cmd.c: Fix indentation.
* guile/scm-frame.c: Fix indentation.
* guile/scm-iterator.c: Fix indentation.
* guile/scm-math.c: Fix indentation.
* guile/scm-ports.c: Fix indentation.
* guile/scm-pretty-print.c: Fix indentation.
* guile/scm-value.c: Fix indentation.
* h8300-tdep.c: Fix indentation.
* hppa-linux-nat.c: Fix indentation.
* hppa-linux-tdep.c: Fix indentation.
* hppa-nbsd-nat.c: Fix indentation.
* hppa-nbsd-tdep.c: Fix indentation.
* hppa-obsd-nat.c: Fix indentation.
* hppa-tdep.c: Fix indentation.
* hppa-tdep.h: Fix indentation.
* i386-bsd-nat.c: Fix indentation.
* i386-darwin-nat.c: Fix indentation.
* i386-darwin-tdep.c: Fix indentation.
* i386-dicos-tdep.c: Fix indentation.
* i386-gnu-nat.c: Fix indentation.
* i386-linux-nat.c: Fix indentation.
* i386-linux-tdep.c: Fix indentation.
* i386-nto-tdep.c: Fix indentation.
* i386-obsd-tdep.c: Fix indentation.
* i386-sol2-nat.c: Fix indentation.
* i386-tdep.c: Fix indentation.
* i386-tdep.h: Fix indentation.
* i386-windows-tdep.c: Fix indentation.
* i387-tdep.c: Fix indentation.
* i387-tdep.h: Fix indentation.
* ia64-libunwind-tdep.c: Fix indentation.
* ia64-libunwind-tdep.h: Fix indentation.
* ia64-linux-nat.c: Fix indentation.
* ia64-linux-tdep.c: Fix indentation.
* ia64-tdep.c: Fix indentation.
* ia64-tdep.h: Fix indentation.
* ia64-vms-tdep.c: Fix indentation.
* infcall.c: Fix indentation.
* infcmd.c: Fix indentation.
* inferior.c: Fix indentation.
* infrun.c: Fix indentation.
* iq2000-tdep.c: Fix indentation.
* language.c: Fix indentation.
* linespec.c: Fix indentation.
* linux-fork.c: Fix indentation.
* linux-nat.c: Fix indentation.
* linux-tdep.c: Fix indentation.
* linux-thread-db.c: Fix indentation.
* lm32-tdep.c: Fix indentation.
* m2-lang.c: Fix indentation.
* m2-typeprint.c: Fix indentation.
* m2-valprint.c: Fix indentation.
* m32c-tdep.c: Fix indentation.
* m32r-linux-tdep.c: Fix indentation.
* m32r-tdep.c: Fix indentation.
* m68hc11-tdep.c: Fix indentation.
* m68k-bsd-nat.c: Fix indentation.
* m68k-linux-nat.c: Fix indentation.
* m68k-linux-tdep.c: Fix indentation.
* m68k-tdep.c: Fix indentation.
* machoread.c: Fix indentation.
* macrocmd.c: Fix indentation.
* macroexp.c: Fix indentation.
* macroscope.c: Fix indentation.
* macrotab.c: Fix indentation.
* macrotab.h: Fix indentation.
* main.c: Fix indentation.
* mdebugread.c: Fix indentation.
* mep-tdep.c: Fix indentation.
* mi/mi-cmd-catch.c: Fix indentation.
* mi/mi-cmd-disas.c: Fix indentation.
* mi/mi-cmd-env.c: Fix indentation.
* mi/mi-cmd-stack.c: Fix indentation.
* mi/mi-cmd-var.c: Fix indentation.
* mi/mi-cmds.c: Fix indentation.
* mi/mi-main.c: Fix indentation.
* mi/mi-parse.c: Fix indentation.
* microblaze-tdep.c: Fix indentation.
* minidebug.c: Fix indentation.
* minsyms.c: Fix indentation.
* mips-linux-nat.c: Fix indentation.
* mips-linux-tdep.c: Fix indentation.
* mips-nbsd-tdep.c: Fix indentation.
* mips-tdep.c: Fix indentation.
* mn10300-linux-tdep.c: Fix indentation.
* mn10300-tdep.c: Fix indentation.
* moxie-tdep.c: Fix indentation.
* msp430-tdep.c: Fix indentation.
* namespace.h: Fix indentation.
* nat/fork-inferior.c: Fix indentation.
* nat/gdb_ptrace.h: Fix indentation.
* nat/linux-namespaces.c: Fix indentation.
* nat/linux-osdata.c: Fix indentation.
* nat/netbsd-nat.c: Fix indentation.
* nat/x86-dregs.c: Fix indentation.
* nbsd-nat.c: Fix indentation.
* nbsd-tdep.c: Fix indentation.
* nios2-linux-tdep.c: Fix indentation.
* nios2-tdep.c: Fix indentation.
* nto-procfs.c: Fix indentation.
* nto-tdep.c: Fix indentation.
* objfiles.c: Fix indentation.
* objfiles.h: Fix indentation.
* opencl-lang.c: Fix indentation.
* or1k-tdep.c: Fix indentation.
* osabi.c: Fix indentation.
* osabi.h: Fix indentation.
* osdata.c: Fix indentation.
* p-lang.c: Fix indentation.
* p-typeprint.c: Fix indentation.
* p-valprint.c: Fix indentation.
* parse.c: Fix indentation.
* ppc-linux-nat.c: Fix indentation.
* ppc-linux-tdep.c: Fix indentation.
* ppc-nbsd-nat.c: Fix indentation.
* ppc-nbsd-tdep.c: Fix indentation.
* ppc-obsd-nat.c: Fix indentation.
* ppc-ravenscar-thread.c: Fix indentation.
* ppc-sysv-tdep.c: Fix indentation.
* ppc64-tdep.c: Fix indentation.
* printcmd.c: Fix indentation.
* proc-api.c: Fix indentation.
* producer.c: Fix indentation.
* producer.h: Fix indentation.
* prologue-value.c: Fix indentation.
* prologue-value.h: Fix indentation.
* psymtab.c: Fix indentation.
* python/py-arch.c: Fix indentation.
* python/py-bpevent.c: Fix indentation.
* python/py-event.c: Fix indentation.
* python/py-event.h: Fix indentation.
* python/py-finishbreakpoint.c: Fix indentation.
* python/py-frame.c: Fix indentation.
* python/py-framefilter.c: Fix indentation.
* python/py-inferior.c: Fix indentation.
* python/py-infthread.c: Fix indentation.
* python/py-objfile.c: Fix indentation.
* python/py-prettyprint.c: Fix indentation.
* python/py-registers.c: Fix indentation.
* python/py-signalevent.c: Fix indentation.
* python/py-stopevent.c: Fix indentation.
* python/py-stopevent.h: Fix indentation.
* python/py-threadevent.c: Fix indentation.
* python/py-tui.c: Fix indentation.
* python/py-unwind.c: Fix indentation.
* python/py-value.c: Fix indentation.
* python/py-xmethods.c: Fix indentation.
* python/python-internal.h: Fix indentation.
* python/python.c: Fix indentation.
* ravenscar-thread.c: Fix indentation.
* record-btrace.c: Fix indentation.
* record-full.c: Fix indentation.
* record.c: Fix indentation.
* reggroups.c: Fix indentation.
* regset.h: Fix indentation.
* remote-fileio.c: Fix indentation.
* remote.c: Fix indentation.
* reverse.c: Fix indentation.
* riscv-linux-tdep.c: Fix indentation.
* riscv-ravenscar-thread.c: Fix indentation.
* riscv-tdep.c: Fix indentation.
* rl78-tdep.c: Fix indentation.
* rs6000-aix-tdep.c: Fix indentation.
* rs6000-lynx178-tdep.c: Fix indentation.
* rs6000-nat.c: Fix indentation.
* rs6000-tdep.c: Fix indentation.
* rust-lang.c: Fix indentation.
* rx-tdep.c: Fix indentation.
* s12z-tdep.c: Fix indentation.
* s390-linux-tdep.c: Fix indentation.
* score-tdep.c: Fix indentation.
* ser-base.c: Fix indentation.
* ser-mingw.c: Fix indentation.
* ser-uds.c: Fix indentation.
* ser-unix.c: Fix indentation.
* serial.c: Fix indentation.
* sh-linux-tdep.c: Fix indentation.
* sh-nbsd-tdep.c: Fix indentation.
* sh-tdep.c: Fix indentation.
* skip.c: Fix indentation.
* sol-thread.c: Fix indentation.
* solib-aix.c: Fix indentation.
* solib-darwin.c: Fix indentation.
* solib-frv.c: Fix indentation.
* solib-svr4.c: Fix indentation.
* solib.c: Fix indentation.
* source.c: Fix indentation.
* sparc-linux-tdep.c: Fix indentation.
* sparc-nbsd-tdep.c: Fix indentation.
* sparc-obsd-tdep.c: Fix indentation.
* sparc-ravenscar-thread.c: Fix indentation.
* sparc-tdep.c: Fix indentation.
* sparc64-linux-tdep.c: Fix indentation.
* sparc64-nbsd-tdep.c: Fix indentation.
* sparc64-obsd-tdep.c: Fix indentation.
* sparc64-tdep.c: Fix indentation.
* stabsread.c: Fix indentation.
* stack.c: Fix indentation.
* stap-probe.c: Fix indentation.
* stubs/ia64vms-stub.c: Fix indentation.
* stubs/m32r-stub.c: Fix indentation.
* stubs/m68k-stub.c: Fix indentation.
* stubs/sh-stub.c: Fix indentation.
* stubs/sparc-stub.c: Fix indentation.
* symfile-mem.c: Fix indentation.
* symfile.c: Fix indentation.
* symfile.h: Fix indentation.
* symmisc.c: Fix indentation.
* symtab.c: Fix indentation.
* symtab.h: Fix indentation.
* target-float.c: Fix indentation.
* target.c: Fix indentation.
* target.h: Fix indentation.
* tic6x-tdep.c: Fix indentation.
* tilegx-linux-tdep.c: Fix indentation.
* tilegx-tdep.c: Fix indentation.
* top.c: Fix indentation.
* tracefile-tfile.c: Fix indentation.
* tracepoint.c: Fix indentation.
* tui/tui-disasm.c: Fix indentation.
* tui/tui-io.c: Fix indentation.
* tui/tui-regs.c: Fix indentation.
* tui/tui-stack.c: Fix indentation.
* tui/tui-win.c: Fix indentation.
* tui/tui-winsource.c: Fix indentation.
* tui/tui.c: Fix indentation.
* typeprint.c: Fix indentation.
* ui-out.h: Fix indentation.
* unittests/copy_bitwise-selftests.c: Fix indentation.
* unittests/memory-map-selftests.c: Fix indentation.
* utils.c: Fix indentation.
* v850-tdep.c: Fix indentation.
* valarith.c: Fix indentation.
* valops.c: Fix indentation.
* valprint.c: Fix indentation.
* valprint.h: Fix indentation.
* value.c: Fix indentation.
* value.h: Fix indentation.
* varobj.c: Fix indentation.
* vax-tdep.c: Fix indentation.
* windows-nat.c: Fix indentation.
* windows-tdep.c: Fix indentation.
* xcoffread.c: Fix indentation.
* xml-syscall.c: Fix indentation.
* xml-tdesc.c: Fix indentation.
* xstormy16-tdep.c: Fix indentation.
* xtensa-config.c: Fix indentation.
* xtensa-linux-nat.c: Fix indentation.
* xtensa-linux-tdep.c: Fix indentation.
* xtensa-tdep.c: Fix indentation.
gdbserver/ChangeLog:
* ax.cc: Fix indentation.
* dll.cc: Fix indentation.
* inferiors.h: Fix indentation.
* linux-low.cc: Fix indentation.
* linux-nios2-low.cc: Fix indentation.
* linux-ppc-ipa.cc: Fix indentation.
* linux-ppc-low.cc: Fix indentation.
* linux-x86-low.cc: Fix indentation.
* linux-xtensa-low.cc: Fix indentation.
* regcache.cc: Fix indentation.
* server.cc: Fix indentation.
* tracepoint.cc: Fix indentation.
gdbsupport/ChangeLog:
* common-exceptions.h: Fix indentation.
* event-loop.cc: Fix indentation.
* fileio.cc: Fix indentation.
* filestuff.cc: Fix indentation.
* gdb-dlfcn.cc: Fix indentation.
* gdb_string_view.h: Fix indentation.
* job-control.cc: Fix indentation.
* signals.cc: Fix indentation.
Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
|
|
This changes target_section_table to wrap a std::vector. This
simplifies some code, and also enables the simplifications coming in
the subsequent patches.
Note that for solib, I chose to have it use a pointer to a
target_section_table. This is more convoluted than would be ideal,
but I didn't want to convert solib to new/delete as a prerequisite for
this series.
gdb/ChangeLog
2020-10-12 Tom Tromey <tom@tromey.com>
* target.c (target_section_by_addr, memory_xfer_partial_1):
Update.
* target-section.h (struct target_section_table): Use
std::vector.
* symfile.h (build_section_addr_info_from_section_table): Take a
target_section_table.
* symfile.c (build_section_addr_info_from_section_table): Take a
target_section_table.
* solist.h (struct so_list) <sections>: Change type.
<sections_end>: Remove.
* solib.c (solib_map_sections, clear_so, solib_read_symbols)
(solib_contains_address_p): Update.
* solib-svr4.c (scan_dyntag): Update.
* solib-dsbt.c (scan_dyntag): Update.
* remote.c (remote_target::remote_xfer_live_readonly_partial):
Update.
* record-full.c (record_full_core_start, record_full_core_end):
Remove.
(record_full_core_sections): New global.
(record_full_core_open_1, record_full_core_target::xfer_partial):
Update.
* exec.h (build_section_table, section_table_xfer_memory_partial)
(add_target_sections): Take a target_section_table.
* exec.c (exec_file_attach, clear_section_table): Update.
(resize_section_table): Remove.
(build_section_table, add_target_sections): Take a
target_section_table.
(add_target_sections_of_objfile, remove_target_sections)
(exec_on_vfork): Update.
(section_table_available_memory): Take a target_section_table.
(section_table_read_available_memory): Update.
(section_table_xfer_memory_partial): Take a target_section_table.
(print_section_info, set_section_command)
(exec_set_section_address, exec_target::has_memory): Update.
* corelow.c (class core_target) <m_core_section_table,
m_core_file_mappings>: Remove braces.
<~core_target>: Remove.
(core_target::core_target): Update.
(core_target::~core_target): Remove.
(core_target::build_file_mappings)
(core_target::xfer_memory_via_mappings)
(core_target::xfer_partial, core_target::info_proc_mappings):
Update.
* bfd-target.c (target_bfd::xfer_partial): Update.
(target_bfd::target_bfd): Update.
(target_bfd::~target_bfd): Remove.
|
|
This changes some functions in symfile.c to avoid
bfd_map_over_sections, in favor of iteration. Some helper types can
also be removed due to this change.
gdb/ChangeLog
2020-09-19 Tom Tromey <tom@tromey.com>
* symfile.h: (find_lowest_section): Don't declare.
* symfile.c (find_lowest_section): Now static. Change
parameters.
(struct place_section_arg): Remove.
(place_section): Change parameters.
(addr_info_make_relative): Use foreach.
(symfile_dummy_outputs): Remove.
(default_symfile_relocate): Use foreach.
|
|
dwarf2_free_objfile no longer exists, so this patch removes its
declaration from symfile.h.
gdb/ChangeLog
2020-09-06 Tom Tromey <tom@tromey.com>
* symfile.h (dwarf2_free_objfile): Don't declare.
|
|
Change the symfile_segment_data::segment_info array to be an
std::vector. No functional changes are expected.
gdb/ChangeLog:
* symfile.h (struct symfile_segment_data)
<~symfile_segment_data>: Remove.
<segment_info>: Change to std::vector.
* symfile.c (default_symfile_segments): Update.
* elfread.c (elf_symfile_segments): Update.
|
|
Instead of maintaining two vectors, I added a small `segment` class
which holds both the base address and size of one segment and replaced
the two `segment_bases` and `segment_sizes` arrays with a single vector.
The rest of the changes are straightforward, no behavior changes are
expected.
gdb/ChangeLog:
* symfile.h (struct symfile_segment_data) <struct segment>: New.
<segments>: New.
<segment_bases, segment_sizes>: Remove.
* symfile.c (default_symfile_segments): Update.
* elfread.c (elf_symfile_segments): Update.
* remote.c (remote_target::get_offsets): Update.
* solib-target.c (solib_target_relocate_section_addresses):
Update.
|
|
- Allocate this structure with new instead of XNEW, use a unique pointer
to manage its lifetime.
- Change a few functions to return a unique pointer instead of a
plain pointer.
- Change free_symfile_segment_data to be symfile_segment_data's
destructor.
gdb/ChangeLog:
* symfile.h (struct symfile_segment_data): Initialize fields.
<~symfile_segment_data>: Add.
(symfile_segment_data_up): New.
(struct sym_fns) <sym_segments>: Return a
symfile_segment_data_up.
(default_symfile_segments): Return a symfile_segment_data_up.
(free_symfile_segment_data): Remove.
(get_symfile_segment_data): Return a symfile_segment_data_up.
* symfile.c (default_symfile_segments): Likewise.
(get_symfile_segment_data): Likewise.
(free_symfile_segment_data): Remove.
(symfile_find_segment_sections): Update.
* elfread.c (elf_symfile_segments): Return a
symfile_segment_data_up.
* remote.c (remote_target::get_offsets): Update.
* solib-target.c (solib_target_relocate_section_addresses):
Update.
* symfile-debug.c (debug_sym_segments): Return a
symfile_segment_data_up.
|
|
Consider this test-case, consisting of header file hello.h:
...
inline static const char*
foo (void)
{
return "foo";
}
...
and source file hello.c:
...
int
main (void)
{
printf ("hello: %s\n", foo ());
return 0;
}
...
compiled with -g:
...
$ gcc hello.c -g
...
When trying to expand the partial symtab for hello.h:
...
$ gdb -batch \
-iex "set language c" \
a.out \
-ex "maint expand-symtabs hello.h" \
-ex "maint info psymtabs"
...
we in fact find that the partial symtab for hello.h (and corresponding
includer partial symtab hello.c) have not been expanded:
...
{ psymtab hello.h ((struct partial_symtab *) 0x27cf070)
readin no
...
{ psymtab hello.c ((struct partial_symtab *) 0x2cf09e0)
readin no
...
This is due to the recursively_search_psymtabs call in
psym_expand_symtabs_matching:
...
if (recursively_search_psymtabs (ps, objfile, domain,
lookup_name, symbol_matcher))
...
which always returns false for symbolless partial symtabs.
The same problem occurs with CUs where the dwarf is generated by gas
--gdwarf-2 for a foo.S: if we read such a test-case with -readnow, we'll have
a symbolless symtab for foo.S. But if we read the test-case with partial
symtabs, and expand those using "maint expand-symtabs", the foo.S psymtab
remains unexpanded.
Fix this by passing a NULL symbol_matcher and lookup_name to
expand_symtabs_matching in maintenance_expand_symtabs, and skipping the call
to recursively_search_psymtabs if symbol_matcher == NULL and
lookup_name == NULL.
Build and tested on x86_64-linux, with native.
In addition, tested test-case with target boards cc-with-gdb-index.exp,
cc-with-debug-names.exp and readnow.exp.
gdb/ChangeLog:
2020-04-14 Tom de Vries <tdevries@suse.de>
PR symtab/25720
* symmisc.c (maintenance_expand_symtabs): Call expand_symtabs_matching
with NULL symbol_matcher and lookup_name.
* psymtab.c (psym_expand_symtabs_matching): Handle NULL symbol_matcher
and lookup_name.
* dwarf2/read.c (dw2_expand_symtabs_matching)
(dw2_debug_names_expand_symtabs_matching): Same.
* symfile.h (struct quick_symbol_functions::expand_symtabs_matching):
Make lookup_name a pointer. Update comment.
* symtab.c (global_symbol_searcher::expand_symtabs): Handle
lookup_name being a pointer.
* symfile.c (expand_symtabs_matching): Same.
* symfile-debug.c (debug_qf_expand_symtabs_matching): Same.
* linespec.c (iterate_over_all_matching_symtabs): Same.
gdb/testsuite/ChangeLog:
2020-04-14 Tom de Vries <tdevries@suse.de>
PR symtab/25720
* gdb.base/maint-expand-symbols-header-file.c: New test.
* gdb.base/maint-expand-symbols-header-file.exp: New file.
* gdb.base/maint-expand-symbols-header-file.h: New test.
|
|
When language is set to auto, part of loading an executable is to update the
language accordingly. This is implemented by set_initial_language.
The implementation of set_initial_language works as follows:
- check if any objfile in the progspace has name_of_main/language_of_main
set, and if so, use the first one found. [ This is what you get f.i. when
using dwarf with DW_AT_main_subprogram. ]
- otherwise, check for known names in the minimal symbols, and either:
- use the associated language if any (f.i. for ada), or
- lookup the symbol in the symtab for the name and use the symbol language
(f.i. for c/c++).
The symbol lookup can be slow though.
In the case of the cc1 binary from PR23710 comment 1, getting to the initial
prompt takes ~8s:
...
$ time.sh gdb cc1 -batch -ex "show language"
The current source language is "auto; currently c++".
maxmem: 1272260
real: 8.05
user: 7.73
system: 0.38
...
but if we skip guessing the initial language by setting it instead, it takes
only ~4s:
...
$ time.sh gdb -iex "set language c++" cc1 -batch -ex "show language"
The current source language is "c++".
maxmem: 498272
real: 3.99
user: 3.90
system: 0.15
...
In both cases, we load the partial symbols for the executable, but in the
first case only we also do a lookup of main, which causes the corresponding
partial symtab to be expanded into a full symtab.
Ideally, we'd like to get the language of the symbol without triggering
expansion into a full symtab, and get the speedup without having to set the
language manually.
There's a related fixme in the header comment of set_initial_language:
...
/* Set the initial language.
FIXME: A better solution would be to record the language in the
psymtab when reading partial symbols, and then use it (if known) to
set the language. This would be a win for formats that encode the
language in an easily discoverable place, such as DWARF. For
stabs, we can jump through hoops looking for specially named
symbols or try to intuit the language from the specific type of
stabs we find, but we can't do that until later when we read in
full symbols. */
void
set_initial_language (void)
...
Since we're already tracking the language of partial symbols, use this to set
the language for the main symbol.
Note that this search in partial symbol tables is not guaranteed to yield the
same result as the lookup_symbol_in_language call currently done in
set_initial_language.
Build and reg-tested on x86_64-linux.
gdb/ChangeLog:
2020-04-02 Tom de Vries <tdevries@suse.de>
* dwarf2/read.c (dwarf2_gdb_index_functions,
dwarf2_debug_names_functions): Init lookup_global_symbol_language with
NULL.
* psymtab.c (psym_lookup_global_symbol_language): New function.
(psym_functions): Init psym_lookup_global_symbol_language with
psym_lookup_global_symbol_language.
* symfile-debug.c (debug_sym_quick_functions): Init
lookup_global_symbol_language with NULL.
* symfile.c (set_initial_language): Remove fixme comment.
* symfile.h (struct quick_symbol_functions): Add
lookup_global_symbol_language.
* symtab.c (find_quick_global_symbol_language): New function.
(find_main_name): Use find_quick_global_symbol_language.
gdb/testsuite/ChangeLog:
2020-04-02 Tom de Vries <tdevries@suse.de>
* gdb.base/main-psymtab.exp: New file.
|
|
* Process debug_str_offsets section. Handle DW_AT_str_offsets_base attribute and
keep the value in dwarf2_cu.
* Make addr_base field in dwarf2_cu optional to disambiguate 0 value
(absent or present and 0).
* During parsing, there is no guarantee that DW_AT_str_offsets_base and
DW_AT_rnglists_base fields will be processed before the attributes that need
those values for correct computation. So make two passes, on the first one mark
the attributes that depend on *_base attributes and process only the others.
On the second pass, only process the attributes that are marked on the first
pass.
* For string attributes, differentiate between addresses that directly point to
a string and those that point to an offset in debug_str_offsets section.
* There are now two attributes, DW_AT_addr_base and DW_AT_GNU_addr_base to read
address offset base. Likewise, there are two attributes, DW_AT_rnglists_base
and DW_AT_GNU_ranges_base to read ranges base. Since there is no guarantee which
ones the compiler will generate, create helper functions to handle all cases.
Tested with CC=/usr/bin/gcc (version 8.3.0) against master branch (also with
-gsplit-dwarf and -gdwarf-4 flags) and there was no increase in the set of
tests that fails. (gdb still cannot debug a 'hello world' program with DWARF 5,
so for the time being, this is all we care about).
This is part of an effort to support DWARF-5 in gdb.
|
|
This changes section_offsets to be specialization of a std::vector and
updates all the users. It also removes the ANOFFSET and
SIZEOF_N_SECTION_OFFSETS macros.
Most of this is just a generic sort of cleanup, that reduces the
number of lines of code. However, a couple spots were doing weird
things.
objfile_relocate did:
- std::vector<struct section_offsets>
- new_debug_offsets (SIZEOF_N_SECTION_OFFSETS (debug_objfile->num_sections));
... which seems to greatly over-estimate the number of elements
needed.
This appeared in set_objfile_default_section_offset:
- std::vector<struct section_offsets> offsets (objf->num_sections,
- { { offset } });
... which makes sense due to type safety, but is also actively
confusing given that section_offsets was previously also a kind of
vector type.
Tested on x86-64 Fedora 30.
gdb/ChangeLog
2020-01-08 Tom Tromey <tromey@adacore.com>
* xcoffread.c (enter_line_range, read_xcoff_symtab)
(process_xcoff_symbol, xcoff_symfile_offsets): Update.
* symtab.h (MSYMBOL_VALUE_ADDRESS): Update.
(struct section_offsets, ANOFFSET, SIZEOF_N_SECTION_OFFSETS):
Remove.
(section_offsets): New typedef.
* symtab.c (fixup_section, get_msymbol_address): Update.
* symmisc.c (dump_msymbols): Update.
* symfile.h (relative_addr_info_to_section_offsets)
(symfile_map_offsets_to_segments): Update.
* symfile.c (build_section_addr_info_from_objfile)
(init_objfile_sect_indices): Update.
(struct place_section_arg): Change type of "offsets".
(place_section): Update.
(relative_addr_info_to_section_offsets): Change type of
"section_offsets". Remove "num_sections" parameter.
(default_symfile_offsets, syms_from_objfile_1)
(set_objfile_default_section_offset): Update.
(reread_symbols): No need to preserve section offsets by hand.
(symfile_map_offsets_to_segments): Change type of "offsets".
* stap-probe.c (relocate_address): Update.
* stabsread.h (process_one_symbol): Update.
* solib-target.c (struct lm_info_target) <offsets>: Change type.
(solib_target_relocate_section_addresses): Update.
* solib-svr4.c (enable_break, svr4_relocate_main_executable):
Update.
* solib-frv.c (frv_relocate_main_executable): Update.
* solib-dsbt.c (dsbt_relocate_main_executable): Update.
* solib-aix.c (solib_aix_get_section_offsets): Change return
type.
(solib_aix_solib_create_inferior_hook): Update.
* remote.c (remote_target::get_offsets): Update.
* psymtab.c (find_pc_sect_psymtab): Update.
* psympriv.h (struct partial_symbol) <address, text_low,
text_high>: Update.
* objfiles.h (obj_section_offset): Update.
(struct objfile) <section_offsets>: Change type.
<num_sections>: Remove.
(objfile_relocate): Update.
* objfiles.c (entry_point_address_query): Update
(relocate_one_symbol): Change type of "section_offsets".
(objfile_relocate1, objfile_relocate1): Change type of
"new_offsets".
(objfile_rebase1): Update.
* mipsread.c (mipscoff_symfile_read): Update.
(read_alphacoff_dynamic_symtab): Remove "section_offsets"
parameter.
* mdebugread.c (parse_symbol): Change type of "section_offsets".
(parse_external, psymtab_to_symtab_1): Update.
* machoread.c (macho_symfile_offsets): Update.
* ia64-tdep.c (ia64_find_unwind_table): Update.
* hppa-tdep.c (read_unwind_info): Update.
* hppa-bsd-tdep.c (hppabsd_find_global_pointer): Update.
* dwarf2read.c (create_addrmap_from_index)
(create_addrmap_from_aranges, dw2_find_pc_sect_compunit_symtab)
(process_psymtab_comp_unit_reader, add_partial_symbol)
(add_partial_subprogram, process_full_comp_unit)
(read_file_scope, read_func_scope, read_lexical_block_scope)
(read_call_site_scope, dwarf2_rnglists_process)
(dwarf2_ranges_process, dwarf2_ranges_read)
(dwarf_decode_lines_1, var_decode_location, new_symbol)
(dwarf2_fetch_die_loc_sect_off, dwarf2_per_cu_text_offset):
Update.
* dwarf2-frame.c (execute_cfa_program, dwarf2_frame_find_fde):
Update.
* dtrace-probe.c (dtrace_probe::get_relocated_address): Update.
* dbxread.c (read_dbx_symtab, read_ofile_symtab): Update.
(process_one_symbol): Change type of "section_offsets".
* ctfread.c (get_objfile_text_range): Update.
* coffread.c (coff_symtab_read, enter_linenos)
(process_coff_symbol): Update.
* coff-pe-read.c (add_pe_forwarded_sym): Update.
* amd64-windows-tdep.c (amd64_windows_find_unwind_info): Update.
Change-Id: I147eb967e9b44d82f4048039de7bb44b80cd72fb
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
In ELF, if a data symbol is defined in a shared library and used by
the main program, it will be subject to a "copy relocation". In this
scenario, the main program has a copy of the symbol in question, and a
relocation that tells ld.so to copy the data from the shared library.
Then the symbol in the main program is used to satisfy all references.
This patch changes gdb to handle this scenario. Data symbols coming
from ELF shared libraries get a special flag that indicates that the
symbol's address may be subject to copy relocation.
I looked briefly into handling copy relocations by looking at the
actual relocations in the main program, but this seemed difficult to
do with BFD.
Note that no caching is done here. Perhaps this could be changed if
need be; I wanted to avoid possible problems with either objfile
lifetimes and changes, or conflicts with the long-term (vapor-ware)
objfile splitting project.
gdb/ChangeLog
2019-10-02 Tom Tromey <tromey@adacore.com>
* symmisc.c (dump_msymbols): Don't use MSYMBOL_VALUE_ADDRESS.
* ada-lang.c (lesseq_defined_than): Handle
LOC_STATIC.
* dwarf2read.c (dwarf2_per_objfile): Add can_copy
parameter.
(dwarf2_has_info): Likewise.
(new_symbol): Set maybe_copied on symbol when
appropriate.
* dwarf2read.h (dwarf2_per_objfile): Add can_copy
parameter.
<can_copy>: New member.
* elfread.c (record_minimal_symbol): Set maybe_copied
on symbol when appropriate.
(elf_symfile_read): Update call to dwarf2_has_info.
* minsyms.c (lookup_minimal_symbol_linkage): New
function.
* minsyms.h (lookup_minimal_symbol_linkage): Declare.
* symtab.c (get_symbol_address, get_msymbol_address):
New functions.
* symtab.h (get_symbol_address, get_msymbol_address):
Declare.
(SYMBOL_VALUE_ADDRESS, MSYMBOL_VALUE_ADDRESS): Handle
maybe_copied.
(struct symbol, struct minimal_symbol) <maybe_copied>:
New member.
|
|
This is for add_setshow_boolean_cmd as well as the gdb::option interface.
gdb/ChangeLog:
2019-09-17 Christian Biesinger <cbiesinger@google.com>
* ada-lang.c (ada_ignore_descriptive_types_p): Change to bool.
(print_signatures): Likewise.
(trust_pad_over_xvs): Likewise.
* arch/aarch64-insn.c (aarch64_debug): Likewise.
* arch/aarch64-insn.h (aarch64_debug): Likewise.
* arm-linux-nat.c (arm_apcs_32): Likewise.
* arm-linux-tdep.c (arm_apcs_32): Likewise.
* arm-nbsd-nat.c (arm_apcs_32): Likewise.
* arm-tdep.c (arm_debug): Likewise.
(arm_apcs_32): Likewise.
* auto-load.c (debug_auto_load): Likewise.
(auto_load_gdb_scripts): Likewise.
(global_auto_load): Likewise.
(auto_load_local_gdbinit): Likewise.
(auto_load_local_gdbinit_loaded): Likewise.
* auto-load.h (global_auto_load): Likewise.
(auto_load_local_gdbinit): Likewise.
(auto_load_local_gdbinit_loaded): Likewise.
* breakpoint.c (disconnected_dprintf): Likewise.
(breakpoint_proceeded): Likewise.
(automatic_hardware_breakpoints): Likewise.
(always_inserted_mode): Likewise.
(target_exact_watchpoints): Likewise.
(_initialize_breakpoint): Update.
* breakpoint.h (target_exact_watchpoints): Change to bool.
* btrace.c (maint_btrace_pt_skip_pad): Likewise.
* cli/cli-cmds.c (trace_commands): Likewise.
* cli/cli-cmds.h (trace_commands): Likewise.
* cli/cli-decode.c (add_setshow_boolean_cmd): Change int* argument
to bool*.
* cli/cli-logging.c (logging_overwrite): Change to bool.
(logging_redirect): Likewise.
(debug_redirect): Likewise.
* cli/cli-option.h (option_def) <boolean>: Change return type to bool*.
(struct boolean_option_def) <get_var_address_cb_>: Change return type
to bool.
<boolean_option_def>: Update.
(struct flag_option_def): Change default type of Context to bool
from int.
<flag_option_def>: Change return type of var_address_cb_ to bool*.
* cli/cli-setshow.c (do_set_command): Cast to bool* instead of int*.
(get_setshow_command_value_string): Likewise.
* cli/cli-style.c (cli_styling): Change to bool.
(source_styling): Likewise.
* cli/cli-style.h (source_styling): Likewise.
(cli_styling): Likewise.
* cli/cli-utils.h (struct qcs_flags) <quiet, cont, silent>: Change
to bool.
* command.h (var_types): Update comment.
(add_setshow_boolean_cmd): Change int* var argument to bool*.
* compile/compile-cplus-types.c (debug_compile_cplus_types): Change to
bool.
(debug_compile_cplus_scopes): Likewise.
* compile/compile-internal.h (compile_debug): Likewise.
* compile/compile.c (compile_debug): Likewise.
(struct compile_options) <raw>: Likewise.
* cp-support.c (catch_demangler_crashes): Likewise.
* cris-tdep.c (usr_cmd_cris_version_valid): Likewise.
(usr_cmd_cris_dwarf2_cfi): Likewise.
* csky-tdep.c (csky_debug): Likewise.
* darwin-nat.c (enable_mach_exceptions): Likewise.
* dcache.c (dcache_enabled_p): Likewise.
* defs.h (info_verbose): Likewise.
* demangle.c (demangle): Likewise.
(asm_demangle): Likewise.
* dwarf-index-cache.c (debug_index_cache): Likewise.
* dwarf2-frame.c (dwarf2_frame_unwinders_enabled_p): Likewise.
* dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Likewise.
* dwarf2read.c (check_physname): Likewise.
(use_deprecated_index_sections): Likewise.
(dwarf_always_disassemble): Likewise.
* eval.c (overload_resolution): Likewise.
* event-top.c (set_editing_cmd_var): Likewise.
(exec_done_display_p): Likewise.
* event-top.h (set_editing_cmd_var): Likewise.
(exec_done_display_p): Likewise.
* exec.c (write_files): Likewise.
* fbsd-nat.c (debug_fbsd_lwp): Likewise
(debug_fbsd_nat): Likewise.
* frame.h (struct frame_print_options) <print_raw_frame_arguments>:
Likewise.
(struct set_backtrace_options) <backtrace_past_main>: Likewise.
<backtrace_past_entry> Likewise.
* gdb-demangle.h (demangle): Likewise.
(asm_demangle): Likewise.
* gdb_bfd.c (bfd_sharing): Likewise.
* gdbcore.h (write_files): Likewise.
* gdbsupport/common-debug.c (show_debug_regs): Likewise.
* gdbsupport/common-debug.h (show_debug_regs): Likewise.
* gdbthread.h (print_thread_events): Likewise.
* gdbtypes.c (opaque_type_resolution): Likewise.
(strict_type_checking): Likewise.
* gnu-nat.c (gnu_debug_flag): Likewise.
* guile/scm-auto-load.c (auto_load_guile_scripts): Likewise.
* guile/scm-param.c (pascm_variable): Add boolval.
(add_setshow_generic): Update.
(pascm_param_value): Update.
(pascm_set_param_value_x): Update.
* hppa-tdep.c (hppa_debug): Change to bool..
* infcall.c (may_call_functions_p): Likewise.
(coerce_float_to_double_p): Likewise.
(unwind_on_signal_p): Likewise.
(unwind_on_terminating_exception_p): Likewise.
* infcmd.c (startup_with_shell): Likewise.
* inferior.c (print_inferior_events): Likewise.
* inferior.h (startup_with_shell): Likewise.
(print_inferior_events): Likewise.
* infrun.c (step_stop_if_no_debug): Likewise.
(detach_fork): Likewise.
(debug_displaced): Likewise.
(disable_randomization): Likewise.
(non_stop): Likewise.
(non_stop_1): Likewise.
(observer_mode): Likewise.
(observer_mode_1): Likewise.
(set_observer_mode): Update.
(sched_multi): Change to bool.
* infrun.h (debug_displaced): Likewise.
(sched_multi): Likewise.
(step_stop_if_no_debug): Likewise.
(non_stop): Likewise.
(disable_randomization): Likewise.
* linux-tdep.c (use_coredump_filter): Likewise.
(dump_excluded_mappings): Likewise.
* linux-thread-db.c (auto_load_thread_db): Likewise.
(check_thread_db_on_load): Likewise.
* main.c (captured_main_1): Update.
* maint-test-options.c (struct test_options_opts) <flag_opt, xx1_opt,
xx2_opt, boolean_opt>: Change to bool.
* maint-test-settings.c (maintenance_test_settings_boolean): Likewise.
* maint.c (maintenance_profile_p): Likewise.
(per_command_time): Likewise.
(per_command_space): Likewise.
(per_command_symtab): Likewise.
* memattr.c (inaccessible_by_default): Likewise.
* mi/mi-main.c (mi_async): Likewise.
(mi_async_1): Likewise.
* mips-tdep.c (mips64_transfers_32bit_regs_p): Likewise.
* nat/fork-inferior.h (startup_with_shell): Likewise.
* nat/linux-namespaces.c (debug_linux_namespaces): Likewise.
* nat/linux-namespaces.h (debug_linux_namespaces): Likewise.
* nios2-tdep.c (nios2_debug): Likewise.
* or1k-tdep.c (or1k_debug): Likewise.
* parse.c (parser_debug): Likewise.
* parser-defs.h (parser_debug): Likewise.
* printcmd.c (print_symbol_filename): Likewise.
* proc-api.c (procfs_trace): Likewise.
* python/py-auto-load.c (auto_load_python_scripts): Likewise.
* python/py-param.c (union parmpy_variable): Add "bool boolval" field.
(set_parameter_value): Update.
(add_setshow_generic): Update.
* python/py-value.c (copy_py_bool_obj): Change argument from int*
to bool*.
* python/python.c (gdbpy_parameter_value): Cast to bool* instead of
int*.
* ravenscar-thread.c (ravenscar_task_support): Change to bool.
* record-btrace.c (record_btrace_target::store_registers): Update.
* record-full.c (record_full_memory_query): Change to bool.
(record_full_stop_at_limit): Likewise.
* record-full.h (record_full_memory_query): Likewise.
* remote-notif.c (notif_debug): Likewise.
* remote-notif.h (notif_debug): Likewise.
* remote.c (use_range_stepping): Likewise.
(interrupt_on_connect): Likewise.
(remote_break): Likewise.
* ser-tcp.c (tcp_auto_retry): Likewise.
* ser-unix.c (serial_hwflow): Likewise.
* skip.c (debug_skip): Likewise.
* solib-aix.c (solib_aix_debug): Likewise.
* spu-tdep.c (spu_stop_on_load_p): Likewise.
(spu_auto_flush_cache_p): Likewise.
* stack.c (struct backtrace_cmd_options) <full, no_filters, hide>:
Likewise.
(struct info_print_options) <quiet>: Likewise.
* symfile-debug.c (debug_symfile): Likewise.
* symfile.c (auto_solib_add): Likewise.
(separate_debug_file_debug): Likewise.
* symfile.h (auto_solib_add): Likewise.
(separate_debug_file_debug): Likewise.
* symtab.c (basenames_may_differ): Likewise.
(struct filename_partial_match_opts) <dirname, basename>: Likewise.
(struct info_print_options) <quiet, exclude_minsyms>: Likewise.
(struct info_types_options) <quiet>: Likewise.
* symtab.h (demangle): Likewise.
(basenames_may_differ): Likewise.
* target-dcache.c (stack_cache_enabled_1): Likewise.
(code_cache_enabled_1): Likewise.
* target.c (trust_readonly): Likewise.
(may_write_registers): Likewise.
(may_write_memory): Likewise.
(may_insert_breakpoints): Likewise.
(may_insert_tracepoints): Likewise.
(may_insert_fast_tracepoints): Likewise.
(may_stop): Likewise.
(auto_connect_native_target): Likewise.
(target_stop_and_wait): Update.
(target_async_permitted): Change to bool.
(target_async_permitted_1): Likewise.
(may_write_registers_1): Likewise.
(may_write_memory_1): Likewise.
(may_insert_breakpoints_1): Likewise.
(may_insert_tracepoints_1): Likewise.
(may_insert_fast_tracepoints_1): Likewise.
(may_stop_1): Likewise.
* target.h (target_async_permitted): Likewise.
(may_write_registers): Likewise.
(may_write_memory): Likewise.
(may_insert_breakpoints): Likewise.
(may_insert_tracepoints): Likewise.
(may_insert_fast_tracepoints): Likewise.
(may_stop): Likewise.
* thread.c (struct info_threads_opts) <show_global_ids>: Likewise.
(make_thread_apply_all_options_def_group): Change argument from int*
to bool*.
(thread_apply_all_command): Update.
(print_thread_events): Change to bool.
* top.c (confirm): Likewise.
(command_editing_p): Likewise.
(history_expansion_p): Likewise.
(write_history_p): Likewise.
(info_verbose): Likewise.
* top.h (confirm): Likewise.
(history_expansion_p): Likewise.
* tracepoint.c (disconnected_tracing): Likewise.
(circular_trace_buffer): Likewise.
* typeprint.c (print_methods): Likewise.
(print_typedefs): Likewise.
* utils.c (debug_timestamp): Likewise.
(sevenbit_strings): Likewise.
(pagination_enabled): Likewise.
* utils.h (sevenbit_strings): Likewise.
(pagination_enabled): Likewise.
* valops.c (overload_resolution): Likewise.
* valprint.h (struct value_print_options) <prettyformat_arrays,
prettyformat_structs, vtblprint, unionprint, addressprint, objectprint,
stop_print_at_null, print_array_indexes, deref_ref, static_field_print,
pascal_static_field_print, raw, summary, symbol_print, finish_print>:
Likewise.
* windows-nat.c (new_console): Likewise.
(cygwin_exceptions): Likewise.
(new_group): Likewise.
(debug_exec): Likewise.
(debug_events): Likewise.
(debug_memory): Likewise.
(debug_exceptions): Likewise.
(useshell): Likewise.
* windows-tdep.c (maint_display_all_tib): Likewise.
* xml-support.c (debug_xml): Likewise.
|
|
This patch further simplifies the map_matching_symbols callback, by
having it take a lookup_name_info rather than a plain string.
gdb/ChangeLog
2019-09-10 Tom Tromey <tromey@adacore.com>
* ada-lang.c (add_nonlocal_symbols): Combine calls to
map_matching_symbols. Update.
* dwarf2read.c (dw2_map_matching_symbols): Update.
* psymtab.c (match_partial_symbol): Change type; update.
(psym_map_matching_symbols): Likewise.
* symfile-debug.c (debug_qf_map_matching_symbols): Change
type; update.
* symfile.h (struct quick_symbol_functions)
<map_matching_symbols>: Change "name" to be a lookup_name_info.
Remove "match".
|
|
This changes map_matching_symbols to take a
symbol_found_callback_ftype, rather than separate callback and data
parameters. This enables a future patch to clean up some existing
code so that it can more readily be shared.
gdb/ChangeLog
2019-09-10 Tom Tromey <tromey@adacore.com>
* ada-lang.c (aux_add_nonlocal_symbols): Change type.
(add_nonlocal_symbols): Update.
* dwarf2read.c (dw2_map_matching_symbols): Change type.
* psymtab.c (map_block, psym_map_matching_symbols): Change type.
* symfile-debug.c (debug_qf_map_matching_symbols): Change type.
* symfile.h (struct quick_symbol_functions) <map_matching_symbols>:
Change type of "callback". Remove "data".
|
|
The only two values valid to pass to the block_index parameter of
quick_symbol_functions::lookup_symbol are GLOBAL_BLOCK and STATIC_BLOCK,
part of enum block_enum. Change the type of that parameter to
block_enum.
Change also the block_index field of dw2_symtab_iterator in the same
way.. This makes it consistent with dw2_debug_names_iterator, which
already uses block_enum for its block_index field.
This is a follow-up to this thread:
https://sourceware.org/ml/gdb-patches/2019-08/msg00097.html
gdb/ChangeLog:
* dwarf2read.c (struct dw2_symtab_iterator) <block_index>:
Change type to gdb::optional<block_enum>.
(dw2_symtab_iter_init): Change block_index parameter type
to gdb::optional<block_enum>.
(dw2_lookup_symbol): Change block_index parameter
type to block_enum.c
(dw2_debug_names_lookup_symbol): Likewise.
* psymtab.c (psym_lookup_symbol): Likewise.
* symfile-debug.c (debug_qf_lookup_symbol): Likewise.
* symfile.h (struct quick_symbol_functions) <lookup_symbol>:
Likewise.
|
|
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
|
|
... since the implementation is in symfile.c.
At the same time, add some documentation and make sure the first
parameter's name in the declaration matches the definition.
gdb/ChangeLog:
* defs.h (generic_load): Move from here...
* symfile.h (generic_load): ... to here. Rename name parameter
to args.
* symfile.c (generic_load): Add comment.
|
|
This changes the probes code in elfread.c to use the type-safe
registry API. While doing this, I saw that the caller of get_probes
owns the probes, so I went through the code and changed the vectors to
store unique_ptrs, making the ownership relationship more clear.
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* symfile.h (struct sym_probe_fns) <sym_get_probes>: Change type.
* symfile-debug.c (debug_sym_get_probes): Change type.
* stap-probe.c (handle_stap_probe):
(stap_static_probe_ops::get_probes): Change type.
* probe.h (class static_probe_ops) <get_probes>: Change type.
* probe.c (class any_static_probe_ops) <get_probes>: Change type.
(parse_probes_in_pspace): Update.
(find_probes_in_objfile, find_probe_by_pc, collect_probes):
Update.
(any_static_probe_ops::get_probes): Change type.
* elfread.c (elfread_data): New typedef.
(probe_key): Change type.
(elf_get_probes): Likewise. Update.
(probe_key_free): Remove.
(_initialize_elfread): Update.
* dtrace-probe.c (class dtrace_static_probe_ops) <get_probes>:
Change type.
(dtrace_process_dof_probe, dtrace_process_dof)
(dtrace_static_probe_ops::get_probe): Change type.
|
|
I noticed that there are still many places referring to non-const
blocks. This constifies all the remaining ones that I found that
could be constified.
In a few spots, this search found unused variables or fields. I
removed these. I've also removed some unnecessary casts to
"struct block *".
gdb/ChangeLog
2019-03-24 Tom Tromey <tom@tromey.com>
* c-exp.y (typebase): Remove casts.
* gdbtypes.c (lookup_unsigned_typename, )
(lookup_signed_typename): Remove cast.
* eval.c (parse_to_comma_and_eval): Remove cast.
* parse.c (write_dollar_variable): Remove cast.
* block.h (struct block) <superblock>: Now const.
* symfile-debug.c (debug_qf_map_matching_symbols): Update.
* psymtab.c (psym_map_matching_symbols): Make "block" const.
(map_block): Make "block" const.
* symfile.h (struct quick_symbol_functions)
<map_matching_symbols>: Constify block argument to "callback".
* symtab.c (basic_lookup_transparent_type_quick): Make "block"
const.
(find_pc_sect_compunit_symtab): Make "b" const.
(find_symbol_at_address): Likewise.
(search_symbols): Likewise.
* dwarf2read.c (dw2_lookup_symbol): Make "block" const.
(dw2_debug_names_lookup_symbol): Likewise.
(dw2_map_matching_symbols): Update.
* p-valprint.c (pascal_val_print): Remove "block".
* ada-lang.c (ada_add_global_exceptions): Make "b" const.
(aux_add_nonlocal_symbols): Make "block" const.
(resolve_subexp): Remove cast.
* linespec.c (iterate_over_all_matching_symtabs): Make "block"
const.
(iterate_over_file_blocks): Likewise.
* f-exp.y (%union) <bval>: Remove.
* coffread.c (patch_opaque_types): Make "b" const.
* spu-tdep.c (spu_catch_start): Make "block" const.
* c-valprint.c (print_unpacked_pointer): Remove "block".
* symmisc.c (dump_symtab_1): Make "b" const.
(block_depth): Make "block" const.
* d-exp.y (%union) <bval>: Remove.
* cp-support.h (cp_lookup_rtti_type): Update.
* cp-support.c (cp_lookup_rtti_type): Make "block" const.
* psymtab.c (psym_lookup_symbol): Make "block" const.
(maintenance_check_psymtabs): Make "b" const.
* python/py-framefilter.c (extract_sym): Make "sym_block" const.
(enumerate_locals, enumerate_args): Update.
* python/py-symtab.c (stpy_global_block): Make "block" const.
(stpy_static_block): Likewise.
* inline-frame.c (block_starting_point_at): Make "new_block"
const.
* block.c (find_block_in_blockvector): Make return type const.
(blockvector_for_pc_sect): Make "b" const.
(find_block_in_blockvector): Make "b" const.
|
|
This moves a couple of mdebugread-related declarations from symfile.h
to mdebugread.h, which seemed more appropriate.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* symfile.h (mdebug_build_psymtabs, elfmdebug_build_psymtabs):
Don't declare.
* mipsread.c: Include mdebugread.h.
* mdebugread.h (mdebug_build_psymtabs, elfmdebug_build_psymtabs):
Declare.
* elfread.c: Include mdebugread.h.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This patch finally makes partial symbols and partial symtabs
independent of the program space.
Specifically:
It changes add_psymbol_to_list to accept a section index, and changes
the psymbol readers to pass this. At the same time it removes the
code to add the objfile's section offset to the psymbol.
It adds an objfile argument to the psymtab textlow and texthigh
accessors and changes some code to use the raw variants instead.
It removes the "relocate" method from struct quick_symbol_functions,
as it is no longer needed any more.
It changes partial_symbol::address so that the relevant offset is now
applied at the point of use.
gdb/ChangeLog
2018-07-26 Tom Tromey <tom@tromey.com>
* dwarf-index-write.c (add_address_entry): Don't add objfile
offsets.
* dbxread.c (find_stab_function): Rename from
find_stab_function_addr. Return a bound_minimal_symbol.
(read_dbx_symtab): Use raw_text_low, raw_text_high.
Don't add objfile offsets.
(end_psymtab): Use raw_text_low, raw_text_high,
MSYMBOL_VALUE_RAW_ADDRESS.
(read_ofile_symtab): Update.
(process_one_symbol): Update.
* dwarf2read.c (create_addrmap_from_index): Don't add objfile
offsets.
(dw2_relocate): Remove.
(dw2_find_pc_sect_symtab): Bias PC by the text offset before
searching addrmap.
(dwarf2_gdb_index_functions, dwarf2_debug_names_functions):
Update.
(process_psymtab_comp_unit_reader, add_partial_symbol)
(add_partial_subprogram, dwarf2_ranges_read): Update.
(load_partial_dies): Update.
(add_address_entry): Don't add objfile offsets.
(dwarf2_build_include_psymtabs): Update.
(create_addrmap_from_aranges): Don't add objfile offsets.
(dw2_find_pc_sect_compunit_symtab): Update.
* mdebugread.c (parse_symbol): Don't add objfile offsets.
(parse_lines): Remove 'pst' parameter, replace with 'textlow'.
Update.
(parse_partial_symbols): Don't add objfile offsets. Use
raw_text_low, raw_text_high. Update.
(handle_psymbol_enumerators, psymtab_to_symtab_1): Update.
* objfiles.c (objfile_relocate1): Don't relocate psymtabs_addrmap
or call 'relocate' quick function. Clear psymbol_map.
* psympriv.h (struct partial_symbol) <address>: Add section
offset.
<set_unrelocated_address>: Rename from set_address.
<raw_text_low, raw_text_high>: New methods.
<text_low, text_high>: Add objfile parameter.
(add_psymbol_to_bcache): Add 'section' parameter. Call
set_unrelocated_address.
* psymtab.c (find_pc_sect_psymtab_closer, find_pc_sect_psymtab)
(find_pc_psymbol): Update.
(fixup_psymbol_section, relocate_psymtabs): Remove.
(dump_psymtab, psym_functions): Update.
(add_psymbol_to_bcache, add_psymbol_to_list): Add 'section'
parameter.
(maintenance_info_psymtabs, maintenance_check_psymtabs): Update.
(start_psymtab_common): Update.
* symfile-debug.c (debug_qf_relocate): Remove.
(debug_sym_quick_functions): Update.
* symfile.h (struct quick_symbol_functions) <relocate>: Remove.
* xcoffread.c (scan_xcoff_symtab): Don't add objfile offsets.
Update.
|
|
I noticed that dwarf2_free_objfile can be made static, by changing it
to be a registry cleanup function. This simplifies the code, as well,
because now symbol readers don't have to explicitly call it.
Tested by the buildbot.
gdb/ChangeLog
2018-06-28 Tom Tromey <tom@tromey.com>
* coffread.c (coff_symfile_finish): Update.
* xcoffread.c (xcoff_symfile_finish): Update.
* elfread.c (elf_symfile_finish): Update.
* symfile.h (dwarf2_free_objfile): Don't declare.
* dwarf2read.c (_initialize_dwarf2_read): Use
register_objfile_data_with_cleanup.
(dwarf2_free_objfile): Now static. Change signature.
|
|
Symbol files may contain multiple sections with the same name.
Section addresses specified by add-symbol-file are assigned to the
corresponding BFD sections in addr_info_make_relative using sorted
indexes of both vectors. Since the sort algorithm is not inherently
stable, the comparison function uses sectindex to maintain the
original order. However, add_symbol_file_command uses zero for all
sections, so if the user specifies multiple sections with the same
name, they will be assigned randomly to symbol file sections with
the same name.
gdb/ChangeLog:
2018-06-28 Petr Tesarik <ptesarik@suse.cz>
* symfile.c (add_symbol_file_command): Make sure that sections
|
|
This removes make_cleanup_free_section_addr_info. Instead -- per
Simon's suggestion -- this changes section_addr_info to be a
std::vector.
Regression tested by the buildbot.
gdb/ChangeLog
2018-03-16 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_symfile_offsets): Change type of "addrs".
* utils.h (make_cleanup_free_section_addr_info): Don't declare.
* utils.c (do_free_section_addr_info)
(make_cleanup_free_section_addr_info): Remove.
* symfile.h (struct other_sections): Add constructor.
(struct section_addr_info): Remove.
(section_addr_info): New typedef.
(struct sym_fns) <sym_offsets>: Change type of parameter.
(build_section_addr_info_from_objfile)
(relative_addr_info_to_section_offsets, addr_info_make_relative)
(default_symfile_offsets, symbol_file_add)
(symbol_file_add_from_bfd)
(build_section_addr_info_from_section_table): Update.
(alloc_section_addr_info, free_section_addr_info): Don't declare.
* symfile.c (alloc_section_addr_info): Remove.
(build_section_addr_info_from_section_table): Change return type.
Update.
(build_section_addr_info_from_bfd)
(build_section_addr_info_from_objfile): Likewise.
(free_section_addr_info): Remove.
(relative_addr_info_to_section_offsets): Change type of "addrs".
(addrs_section_compar): Now a std::sort comparator.
(addrs_section_sort): Change return type.
(addr_info_make_relative): Change type of "addrs". Update.
(default_symfile_offsets, syms_from_objfile_1)
(syms_from_objfile, symbol_file_add_with_addrs): Likewise.
(symbol_file_add_separate): Update.
(symbol_file_add): Change type of "addrs". Update.
(add_symbol_file_command): Update. Remove cleanups.
* symfile-mem.c (symbol_file_add_from_memory): Update. Remove
cleanups.
* symfile-debug.c (debug_sym_offsets): Change type of "info".
* solib.c (solib_read_symbols): Update.
* objfiles.c (objfile_relocate): Update. Remove cleanups.
* machoread.c (macho_symfile_offsets): Update.
* jit.c (jit_bfd_try_read_symtab): Update.
|
