Age | Commit message (Collapse) | Author | Files | Lines |
|
This commit is the result of the following actions:
- Running gdb/copyright.py to update all of the copyright headers to
include 2024,
- Manually updating a few files the copyright.py script told me to
update, these files had copyright headers embedded within the
file,
- Regenerating gdbsupport/Makefile.in to refresh it's copyright
date,
- Using grep to find other files that still mentioned 2023. If
these files were updated last year from 2022 to 2023 then I've
updated them this year to 2024.
I'm sure I've probably missed some dates. Feel free to fix them up as
you spot them.
|
|
This commit is the result of running the gdb/copyright.py script,
which automated the update of the copyright year range for all
source files managed by the GDB project to be updated to include
year 2023.
|
|
This changes GDB to use frame_info_ptr instead of frame_info *
The substitution was done with multiple sequential `sed` commands:
sed 's/^struct frame_info;/class frame_info_ptr;/'
sed 's/struct frame_info \*/frame_info_ptr /g' - which left some
issues in a few files, that were manually fixed.
sed 's/\<frame_info \*/frame_info_ptr /g'
sed 's/frame_info_ptr $/frame_info_ptr/g' - used to remove whitespace
problems.
The changed files were then manually checked and some 'sed' changes
undone, some constructors and some gets were added, according to what
made sense, and what Tromey originally did
Co-Authored-By: Bruno Larsen <blarsen@redhat.com>
Approved-by: Tom Tomey <tom@tromey.com>
|
|
After the commit:
commit 08106042d9f5fdff60c129bf33190639f1a98b2a
Date: Thu May 19 13:20:17 2022 +0100
gdb: move the type cast into gdbarch_tdep
GDB would no longer build using g++ 4.8. The issue appears to be some
confusion caused by GDB having 'struct gdbarch_tdep', but also a
templated function called 'gdbarch_tdep'. Prior to the above commit
the gdbarch_tdep function was not templated, and this compiled just
fine. Note that the above commit compiles just fine with later
versions of g++, so this issue was clearly fixed at some point, though
I've not tried to track down exactly when.
In this commit I propose to fix the g++ 4.8 build problem by renaming
'struct gdbarch_tdep' to 'struct gdbarch_tdep_base'. This rename
better represents that the struct is only ever used as a base class,
and removes the overloading of the name, which allows GDB to build
with g++ 4.8.
I've also updated the comment on 'struct gdbarch_tdep_base' to fix a
typo, and the comment on the 'gdbarch_tdep' function, to mention that
in maintainer mode a run-time type check is performed.
|
|
Replace with equivalent getter/setter macros.
Change-Id: I1042564dd47347337374762bd64ec31b5c573ee2
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
Commit 345bd07cce33 ("gdb: fix gdbarch_tdep ODR violation") made a bunch
of files define a *_gdbarch_tdep class that inherits from a gdbarch_tdep
base. But some of these files don't include gdbarch.h, where
gdbarch_tdep is defined. This may cause build errors if gdbarch.h isn't
already included by chance by some other header file. Avoid this by
making them include gdbarch.h.
Change-Id: If433d302007e274daa4f656cfc94f769cf1aa68a
|
|
I would like to be able to use non-trivial types in gdbarch_tdep types.
This is not possible at the moment (in theory), because of the one
definition rule.
To allow it, rename all gdbarch_tdep types to <arch>_gdbarch_tdep, and
make them inherit from a gdbarch_tdep base class. The inheritance is
necessary to be able to pass pointers to all these <arch>_gdbarch_tdep
objects to gdbarch_alloc, which takes a pointer to gdbarch_tdep.
These objects are never deleted through a base class pointer, so I
didn't include a virtual destructor. In the future, if gdbarch objects
deletable, I could imagine that the gdbarch_tdep objects could become
owned by the gdbarch objects, and then it would become useful to have a
virtual destructor (so that the gdbarch object can delete the owned
gdbarch_tdep object). But that's not necessary right now.
It turns out that RISC-V already has a gdbarch_tdep that is
non-default-constructible, so that provides a good motivation for this
change.
Most changes are fairly straightforward, mostly needing to add some
casts all over the place. There is however the xtensa architecture,
doing its own little weird thing to define its gdbarch_tdep. I did my
best to adapt it, but I can't test those changes.
Change-Id: Ic001903f91ddd106bd6ca09a79dabe8df2d69f3b
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
Many global arrays in gdb could be marked "const" but are not. This
patch changes some of them. (There may be other arrays that could
benefit from this treatment. I only examined arrays of strings.)
This lets the linker move some symbols to the readonly data section.
For example, previously:
0000000000000000 d _ZL18can_use_agent_enum
is now:
0000000000000030 r _ZL18can_use_agent_enum
2020-09-14 Tom Tromey <tromey@adacore.com>
* x86-tdep.h (x86_in_indirect_branch_thunk): Update.
* x86-tdep.c (x86_is_thunk_register_name)
(x86_in_indirect_branch_thunk): Update.
* sparc64-tdep.c (sparc64_fpu_register_names)
(sparc64_cp0_register_names, sparc64_register_names)
(sparc64_pseudo_register_names): Now const.
* sparc-tdep.h (struct gdbarch_tdep) <fpu_register_names,
cp0_registers_num>: Now const.
* sparc-tdep.c (sparc_core_register_names)
(sparc32_fpu_register_names, sparc32_cp0_register_names)
(sparc32_pseudo_register_names): Now const.
(validate_tdesc_registers): Update.
* rust-lang.c (rust_extensions): Now const.
* p-lang.c (p_extensions): Now const.
* objc-lang.c (objc_extensions): Now const.
* nto-tdep.c (nto_thread_state_str): Now const.
* moxie-tdep.c (moxie_register_names): Now const.
* mips-tdep.h (struct gdbarch_tdep) <mips_processor_reg_names>:
Now const.
* mips-tdep.c (mips_generic_reg_names, mips_tx39_reg_names)
(mips_linux_reg_names): Now const.
(mips_gdbarch_init): Update.
* microblaze-tdep.c (microblaze_register_names): Now const.
* m68k-tdep.c (m68k_register_names): Now const.
* m32r-tdep.c (m32r_register_names): Now const.
* ia64-tdep.c (ia64_register_names): Now const.
* i386-tdep.h (struct gdbarch_tdep) <register_names,
ymmh_register_names, ymm16h_regnum, mpx_register_names,
k_register_names, zmmh_register_names, xmm_avx512_register_names,
ymm_avx512_register_names, pkeys_register_names>: Now const.
* i386-tdep.c (i386_register_names, i386_zmm_names)
(i386_zmmh_names, i386_k_names, i386_ymm_names, i386_ymmh_names)
(i386_mpx_names, i386_pkeys_names, i386_bnd_names)
(i386_mmx_names, i386_byte_names, i386_word_names): Now const.
* f-lang.c (f_extensions): Now const.
* d-lang.c (d_extensions): Now const.
* csky-tdep.c (csky_register_names): Now const.
* charset.c (default_charset_names, charset_enum): Now const.
(_initialize_charset): Update.
* c-lang.c (c_extensions, cplus_extensions, asm_extensions): Now
const.
* bsd-uthread.c (bsd_uthread_solib_names): Now const.
(bsd_uthread_solib_loaded): Update.
(bsd_uthread_state): Now const.
* amd64-tdep.c (amd64_register_names, amd64_ymm_names)
(amd64_ymm_avx512_names, amd64_ymmh_names)
(amd64_ymmh_avx512_names, amd64_mpx_names, amd64_k_names)
(amd64_zmmh_names, amd64_zmm_names, amd64_xmm_avx512_names)
(amd64_pkeys_names, amd64_byte_names, amd64_word_names)
(amd64_dword_names): Now const.
* agent.c (can_use_agent_enum): Now const.
* ada-tasks.c (task_states, long_task_states): Now const.
* ada-lang.c (known_runtime_file_name_patterns)
(known_auxiliary_function_name_patterns, attribute_names)
(standard_exc, ada_extensions): Now const.
gdbserver/ChangeLog
2020-09-14 Tom Tromey <tromey@adacore.com>
* tracepoint.cc (eval_result_names): Now const.
* ax.cc (gdb_agent_op_names): Now const.
|
|
My earlier patch to fix a declaration mismatch in mips-tdep.h missed a
couple of spots. Basically, I sent it too soon.
This patch fixes a couple more mismatches between a declaration (using
bfd_vma) and the definition (using CORE_ADDR).
gdb/ChangeLog
2020-02-21 Tom Tromey <tromey@adacore.com>
* mips-tdep.h (mips_pc_is_mips16, mips_pc_is_micromips): Parameter
type is CORE_ADDR.
|
|
A build where CORE_ADDR is not the same as bfd_vma pointed out that
mips_pc_is_mips is declared using bfd_vma as the parameter type, but
defined using CORE_ADDR. This patch fixes the declaration.
gdb/ChangeLog
2020-02-19 Tom Tromey <tromey@adacore.com>
* mips-tdep.h (mips_pc_is_mips): Parameter type is CORE_ADDR.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
This is a relatively straightforward patch that changes
gdbarch_software_single_step so it returns an std::vector<CORE_ADDR>
instead of a VEC (CORE_ADDR).
gdb/ChangeLog:
* gdbarch.sh (software_single_step): Change return type to
std::vector<CORE_ADDR>.
* gdbarch.c, gdbarch.h: Re-generate.
* arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw):
Adjust.
(arm_deal_with_atomic_sequence_raw): Adjust.
(thumb_get_next_pcs_raw): Adjust.
(arm_get_next_pcs_raw): Adjust.
(arm_get_next_pcs): Adjust.
* arch/arm-get-next-pcs.h (arm_get_next_pcs): Adjust.
* aarch64-tdep.c (aarch64_software_single_step): Adjust.
* alpha-tdep.c (alpha_deal_with_atomic_sequence): Adjust.
(alpha_software_single_step): Adjust.
* alpha-tdep.h (alpha_software_single_step): Adjust.
* arm-linux-tdep.c (arm_linux_software_single_step): Adjust.
* arm-tdep.c (arm_software_single_step): Adjust.
(arm_breakpoint_kind_from_current_state): Adjust.
* arm-tdep.h (arm_software_single_step): Adjust.
* breakpoint.c (insert_single_step_breakpoint): Adjust.
* cris-tdep.c (cris_software_single_step): Adjust.
* mips-tdep.c (mips_deal_with_atomic_sequence): Adjust.
(micromips_deal_with_atomic_sequence): Adjust.
(deal_with_atomic_sequence): Adjust.
(mips_software_single_step): Adjust.
* mips-tdep.h (mips_software_single_step): Adjust.
* moxie-tdep.c (moxie_software_single_step): Adjust.
* nios2-tdep.c (nios2_software_single_step): Adjust.
* ppc-tdep.h (ppc_deal_with_atomic_sequence): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* s390-linux-tdep.c (s390_software_single_step): Adjust.
* sparc-tdep.c (sparc_software_single_step): Adjust.
* spu-tdep.c (spu_software_single_step): Adjust.
* tic6x-tdep.c (tic6x_software_single_step): Adjust.
gdb/gdbserver/ChangeLog:
* linux-arm-low.c (arm_gdbserver_get_next_pcs): Adjust to
software_single_step change of return type to
std::vector<CORE_ADDR>.
* linux-low.c (install_software_single_step_breakpoints):
Likewise.
* linux-low.h (install_software_single_step_breakpoints):
Likewise.
|
|
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This patch changes gdbarch method software_single_step's parameter from
"struct frame_info *" to "struct regcache *, IOW, software_single_step
starts to use current regcache rather than current frame for software
single.
gdb:
2016-11-22 Yao Qi <yao.qi@linaro.org>
* gdbarch.sh (software_single_step): Change parameter from frame_info
to regcache.
* gdbarch.c, gdbarch.h: Regenerated.
* aarch64-tdep.c (aarch64_software_single_step): Change parameter
from frame_info to regcache. Don't call get_current_regcache.
* alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise.
(alpha_software_single_step): Likewise.
* alpha-tdep.h (alpha_software_single_step): Update declaration.
* arm-linux-tdep.c (arm_linux_software_single_step): Likewise.
* arm-tdep.c (arm_software_single_step): Likewise.
* arm-tdep.h (arm_software_single_step): Likewise.
* breakpoint.c (insert_single_step_breakpoint): Pass regcache to
gdbarch_software_single_step.
* cris-tdep.c (cris_software_single_step): Change parameter from
frame_info to regcache. Don't call get_current_regcache.
* mips-tdep.c (mips_software_single_step): Likewise.
* mips-tdep.h (mips_software_single_step): Update declaration.
* moxie-tdep.c (moxie_software_single_step): Likewise.
* nios2-tdep.c (nios2_software_single_step): Likewise.
* ppc-tdep.h (ppc_deal_with_atomic_sequence): Update declaration.
* rs6000-aix-tdep.c (rs6000_software_single_step): Likewise.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise.
* s390-linux-tdep.c (s390_software_single_step): Likewise.
* sparc-tdep.c (sparc_software_single_step): Likewise.
* spu-tdep.c (spu_software_single_step): Likewise.
* tic6x-tdep.c (tic6x_software_single_step): Likewise.
|
|
This patch changes gdbarch method software_single_step to return a
vector of addresses on which GDB should insert breakpoints, and don't
insert breakpoints. Instead, the caller of
gdbarch_software_single_step inserts breakpoints if the returned
vector is not NULL.
gdb:
2016-11-08 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_software_single_step): Return
VEC (CORE_ADDR) *. Return NULL instead of 0. Don't call
insert_single_step_breakpoint.
* alpha-tdep.c (alpha_deal_with_atomic_sequence): Likewise.
(alpha_software_single_step): Likewise.
* alpha-tdep.h (alpha_software_single_step): Update declaration.
* arm-linux-tdep.c (arm_linux_software_single_step): Return
VEC (CORE_ADDR) *. Return NULL instead of 0.
* arm-tdep.c (arm_software_single_step): Return NULL instead of 0.
* arm-tdep.h (arm_software_single_step): Update declaration.
* breakpoint.c (insert_single_step_breakpoints): New function.
* breakpoint.h (insert_single_step_breakpoints): Declare.
* cris-tdep.c (cris_software_single_step): Return
VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint.
* gdbarch.sh (software_single_step): Change it to return
VEC (CORE_ADDR) *.
* gdbarch.c, gdbarch.h: Regenerated.
* infrun.c (maybe_software_singlestep): Adjust.
* mips-tdep.c (mips_deal_with_atomic_sequence): Return
VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint.
(micromips_deal_with_atomic_sequence): Likewise.
(deal_with_atomic_sequence): Likewise.
(mips_software_single_step): Likewise.
* mips-tdep.h (mips_software_single_step): Update declaration.
* moxie-tdep.c (moxie_software_single_step): Likewise.
* nios2-tdep.c (nios2_software_single_step): Likewise.
* ppc-tdep.h (ppc_deal_with_atomic_sequence): Update
declaration.
* record-full.c (record_full_resume): Adjust.
(record_full_wait_1): Likewise.
* rs6000-aix-tdep.c (rs6000_software_single_step): Return
VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Return
VEC (CORE_ADDR) *. Don't call insert_single_step_breakpoint.
* s390-linux-tdep.c (s390_software_single_step): Likewise.
* sparc-tdep.c (sparc_software_single_step): Likewise.
* spu-tdep.c (spu_software_single_step): Likewise.
* tic6x-tdep.c (tic6x_software_single_step): Likewise.
|
|
This removes support for:
| target | source |
|-------------------+-----------------------|
| target m32rsdi | gdb/remote-m32r-sdi.c |
| target mips | gdb/remote-mips.c |
| target pmon | gdb/remote-mips.c |
| target ddb | gdb/remote-mips.c |
| target rockhopper | gdb/remote-mips.c |
| target lsi | gdb/remote-mips.c |
That is:
- Remote M32R debugging over SDI.
- Debugging boards using the MIPS remote debugging protocol
over a serial line, PMON, and a few variants.
These are the last non-"target remote" remote targets in the tree, if
you don't count "target sim".
Refs:
https://sourceware.org/ml/gdb/2016-03/msg00004.html
https://sourceware.org/ml/gdb-patches/2016-03/msg00580.html
gdb/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
* NEWS: Mention that support for "target m32rsdi", "target mips",
"target pmon", "target ddb", "target rockhopper", and "target lsi"
was removed.
* Makefile.in (ALL_TARGET_OBS): Remove remote-m32r-sdi.o and
remote-mips.o.
(ALLDEPFILES): Remove remote-m32r-sdi.c and remote-mips.c.
* configure.tgt: Remove all references to remote-m32r-sdi.o and
remote-mips.o.
* mips-tdep.c (deprecated_mips_set_processor_regs_hack): Delete
function.
* mips-tdep.h (deprecated_mips_set_processor_regs_hack): Delete
declaration.
* remote-m32r-sdi.c, remote-mips.c: Delete files.
* symfile.c (generic_load, generic_load): Remove comments.
gdb/doc/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
* gdb.texinfo (M32R/SDI): Delete node.
(MIPS Embedded): Remove references to the MIPS remote debugging
protocol, PMON and variants, and the associated commands.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
* mips-tdep.h (MSYMBOL_TARGET_FLAG_MIPS16): New macro.
(MSYMBOL_TARGET_FLAG_MICROMIPS): Likewise.
* mips-tdep.c (mips_elf_make_msymbol_special): Use the new
macros.
(msymbol_is_mips, msymbol_is_mips16, msymbol_is_micromips):
Likewise.
|
|
1. Background information
The MIPS architecture, as originally designed and implemented in
mid-1980s has a uniform instruction word size that is 4 bytes, naturally
aligned. As such all MIPS instructions are located at addresses that
have their bits #1 and #0 set to zeroes, and any attempt to execute an
instruction from an address that has any of the two bits set to one
causes an address error exception. This may for example happen when a
jump-register instruction is executed whose register value used as the
jump target has any of these bits set.
Then in mid 1990s LSI sought a way to improve code density for their
TinyRISC family of MIPS cores and invented an alternatively encoded
instruction set in a joint effort with MIPS Technologies (then a
subsidiary of SGI). The new instruction set has been named the MIPS16
ASE (Application-Specific Extension) and uses a variable instruction
word size, which is 2 bytes (as the name of the ASE suggests) for most,
but there are a couple of exceptions that take 4 bytes, and then most of
the 2-byte instructions can be treated with a 2-byte extension prefix to
expand the range of the immediate operands used.
As a result instructions are no longer 4-byte aligned, instead they are
aligned to a multiple of 2. That left the bit #0 still unused for code
references, be it for the standard MIPS (i.e. as originally invented) or
for the MIPS16 instruction set, and based on that observation a clever
trick was invented that on one hand allowed the processor to be
seamlessly switched between the two instruction sets at any time at the
run time while on the other avoided the introduction of any special
control register to do that.
So it is the bit #0 of the instruction address that was chosen as the
selector and named the ISA bit. Any instruction executed at an even
address is interpreted as a standard MIPS instruction (the address still
has to have its bit #1 clear), any instruction executed at an odd
address is interpreted as a MIPS16 instruction.
To switch between modes ordinary jump instructions are used, such as
used for function calls and returns, specifically the bit #0 of the
source register used in jump-register instructions selects the execution
(ISA) mode for the following piece of code to be interpreted in.
Additionally new jump-immediate instructions were added that flipped the
ISA bit to select the opposite mode upon execution. They were
considered necessary to avoid the need to make register jumps in all
cases as the original jump-immediate instructions provided no way to
change the bit #0 at all.
This was all important for cases where standard MIPS and MIPS16 code had
to be mixed, either for compatibility with the existing binary code base
or to access resources not reachable from MIPS16 code (the MIPS16
instruction set only provides access to general-purpose registers, and
not for example floating-point unit registers or privileged coprocessor
0 registers) -- pieces of code in the opposite mode can be executed as
ordinary subroutine calls.
A similar approach has been more recently adopted for the MIPS16
replacement instruction set defined as the so called microMIPS ASE.
This is another instruction set encoding introduced to the MIPS
architecture. Just like the MIPS16 ASE, the microMIPS instruction set
uses a variable-length encoding, where each instruction takes a multiple
of 2 bytes. The ISA bit has been reused and for microMIPS-capable
processors selects between the standard MIPS and the microMIPS mode
instead.
2. Statement of the problem
To put it shortly, MIPS16 and microMIPS code pointers used by GDB are
different to these observed at the run time. This results in the same
expressions being evaluated producing different results in GDB and in
the program being debugged. Obviously it's the results obtained at the
run time that are correct (they define how the program behaves) and
therefore by definition the results obtained in GDB are incorrect.
A bit longer description will record that obviously at the run time the
ISA bit has to be set correctly (refer to background information above
if unsure why so) or the program will not run as expected. This is
recorded in all the executable file structures used at the run time: the
dynamic symbol table (but not always the static one!), the GOT, and
obviously in all the addresses embedded in code or data of the program
itself, calculated by applying the appropriate relocations at the static
link time.
While a program is being processed by GDB, the ISA bit is stripped off
from any code addresses, presumably to make them the same as the
respective raw memory byte address used by the processor to access the
instruction in the instruction fetch access cycle. This stripping is
actually performed outside GDB proper, in BFD, specifically
_bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at
the very bottom of that function, starting with an: "If this is an
odd-valued function symbol, assume it's a MIPS16 or microMIPS one."
comment).
This function is also responsible for symbol table dumps made by
`objdump' too, so you'll never see the ISA bit reported there by that
tool, you need to use `readelf'.
This is however unlike what is ever done at the run time, the ISA bit
once present is never stripped off, for example a cast like this:
(short *) main
will not strip the ISA bit off and if the resulting pointer is intended
to be used to access instructions as data, for example for software
instruction decoding (like for fault recovery or emulation in a signal
handler) or for self-modifying code then the bit still has to be
stripped off by an explicit AND operation.
This is probably best illustrated with a simple real program example.
Let's consider the following simple program:
$ cat foobar.c
int __attribute__ ((mips16)) foo (void)
{
return 1;
}
int __attribute__ ((mips16)) bar (void)
{
return 2;
}
int __attribute__ ((nomips16)) foo32 (void)
{
return 3;
}
int (*foo32p) (void) = foo32;
int (*foop) (void) = foo;
int fooi = (int) foo;
int
main (void)
{
return foop ();
}
$
This is plain C with no odd tricks, except from the instruction mode
attributes. They are not necessary to trigger this problem, I just put
them here so that the program can be contained in a single source file
and to make it obvious which function is MIPS16 code and which is not.
Let's try it with Linux, so that everyone can repeat this experiment:
$ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c
$
Let's have a look at some interesting symbols:
$ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar'
Symbol table '.dynsym' contains 7 entries:
Symbol table '.symtab' contains 95 entries:
55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c
66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar
68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p
70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop
78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32
80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo
88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi
$
Hmm, no sight of the ISA bit, but notice how foo and bar (but not
foo32!) have been marked as MIPS16 functions (ELF symbol structure's
`st_other' field is used for that).
So let's try to run and poke at this program with GDB. I'll be using a
native system for simplicity (I'll be using ellipses here and there to
remove unrelated clutter):
$ ./foobar
$ echo $?
1
$
So far, so good.
$ gdb ./foobar
[...]
(gdb) break main
Breakpoint 1 at 0x400490: file foobar.c, line 23.
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb)
Yay, it worked! OK, so let's poke at it:
(gdb) print main
$1 = {int (void)} 0x400490 <main>
(gdb) print foo32
$2 = {int (void)} 0x400684 <foo32>
(gdb) print foo32p
$3 = (int (*)(void)) 0x400684 <foo32>
(gdb) print bar
$4 = {int (void)} 0x40068c <bar>
(gdb) print foo
$5 = {int (void)} 0x400680 <foo>
(gdb) print foop
$6 = (int (*)(void)) 0x400681 <foo>
(gdb)
A-ha! Here's the difference and finally the ISA bit!
(gdb) print /x fooi
$7 = 0x400681
(gdb) p/x $pc
p/x $pc
$8 = 0x400491
(gdb)
And here as well...
(gdb) advance foo
foo () at foobar.c:4
4 }
(gdb) disassemble
Dump of assembler code for function foo:
0x00400680 <+0>: jr ra
0x00400682 <+2>: li v0,1
End of assembler dump.
(gdb) finish
Run till exit from #0 foo () at foobar.c:4
main () at foobar.c:24
24 }
Value returned is $9 = 1
(gdb) continue
Continuing.
[Inferior 1 (process 14103) exited with code 01]
(gdb)
So let's be a bit inquisitive...
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb)
Actually we do not like to run foo here at all. Let's run bar instead!
(gdb) set foop = bar
(gdb) print foop
$10 = (int (*)(void)) 0x40068c <bar>
(gdb)
Hmm, no ISA bit. Is it going to work?
(gdb) advance bar
bar () at foobar.c:9
9 }
(gdb) p/x $pc
$11 = 0x40068c
(gdb) disassemble
Dump of assembler code for function bar:
=> 0x0040068c <+0>: jr ra
0x0040068e <+2>: li v0,2
End of assembler dump.
(gdb) finish
Run till exit from #0 bar () at foobar.c:9
Program received signal SIGILL, Illegal instruction.
bar () at foobar.c:9
9 }
(gdb)
Oops!
(gdb) p/x $pc
$12 = 0x40068c
(gdb)
We're still there!
(gdb) continue
Continuing.
Program terminated with signal SIGILL, Illegal instruction.
The program no longer exists.
(gdb)
So let's try something else:
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb) set foop = foo
(gdb) advance foo
foo () at foobar.c:4
4 }
(gdb) disassemble
Dump of assembler code for function foo:
=> 0x00400680 <+0>: jr ra
0x00400682 <+2>: li v0,1
End of assembler dump.
(gdb) finish
Run till exit from #0 foo () at foobar.c:4
Program received signal SIGILL, Illegal instruction.
foo () at foobar.c:4
4 }
(gdb) continue
Continuing.
Program terminated with signal SIGILL, Illegal instruction.
The program no longer exists.
(gdb)
The same problem!
(gdb) run
Starting program:
/net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb) set foop = foo32
(gdb) advance foo32
foo32 () at foobar.c:14
14 }
(gdb) disassemble
Dump of assembler code for function foo32:
=> 0x00400684 <+0>: jr ra
0x00400688 <+4>: li v0,3
End of assembler dump.
(gdb) finish
Run till exit from #0 foo32 () at foobar.c:14
main () at foobar.c:24
24 }
Value returned is $14 = 3
(gdb) continue
Continuing.
[Inferior 1 (process 14113) exited with code 03]
(gdb)
That did work though, so it's the ISA bit only!
(gdb) quit
Enough!
That's the tip of the iceberg only though. So let's rebuild the
executable with some dynamic symbols:
$ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c
$ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar'
Symbol table '.dynsym' contains 32 entries:
6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar
8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p
9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop
15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32
17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo
25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi
Symbol table '.symtab' contains 95 entries:
55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c
69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar
71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p
72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop
79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32
81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo
89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi
$
OK, now the ISA bit is there for a change, but the MIPS16 `st_other'
attribute gone, hmm... What does `objdump' do then:
$ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar'
foobar-dyn: file format elf32-tradbigmips
SYMBOL TABLE:
00000000 l df *ABS* 00000000 foobar.c
004009cc g F .text 00000004 0xf0 bar
00410b88 g O .data 00000004 foo32p
00410b84 g O .data 00000004 foop
004009c4 g F .text 00000008 foo32
004009c0 g F .text 00000004 0xf0 foo
00410b80 g O .data 00000004 fooi
DYNAMIC SYMBOL TABLE:
004009cc g DF .text 00000004 Base 0xf0 bar
00410b88 g DO .data 00000004 Base foo32p
00410b84 g DO .data 00000004 Base foop
004009c4 g DF .text 00000008 Base foo32
004009c0 g DF .text 00000004 Base 0xf0 foo
00410b80 g DO .data 00000004 Base fooi
$
Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone
again.
Let's have a look at some DWARF-2 records GDB uses (I'll be stripping
off a lot here for brevity) -- debug info:
$ mips-linux-gnu-readelf -wi foobar
Contents of the .debug_info section:
[...]
Compilation Unit @ offset 0x88:
Length: 0xbb (32-bit)
Version: 4
Abbrev Offset: 62
Pointer Size: 4
<0><93>: Abbrev Number: 1 (DW_TAG_compile_unit)
<94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2
<98> DW_AT_language : 1 (ANSI C)
<99> DW_AT_name : (indirect string, offset: 0x190): foobar.c
<9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...]
<a1> DW_AT_ranges : 0x0
<a5> DW_AT_low_pc : 0x0
<a9> DW_AT_stmt_list : 0x27
<1><ad>: Abbrev Number: 2 (DW_TAG_subprogram)
<ae> DW_AT_external : 1
<ae> DW_AT_name : foo
<b2> DW_AT_decl_file : 1
<b3> DW_AT_decl_line : 1
<b4> DW_AT_prototyped : 1
<b4> DW_AT_type : <0xc2>
<b8> DW_AT_low_pc : 0x400680
<bc> DW_AT_high_pc : 0x400684
<c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<c2> DW_AT_GNU_all_call_sites: 1
<1><c2>: Abbrev Number: 3 (DW_TAG_base_type)
<c3> DW_AT_byte_size : 4
<c4> DW_AT_encoding : 5 (signed)
<c5> DW_AT_name : int
<1><c9>: Abbrev Number: 4 (DW_TAG_subprogram)
<ca> DW_AT_external : 1
<ca> DW_AT_name : (indirect string, offset: 0x18a): foo32
<ce> DW_AT_decl_file : 1
<cf> DW_AT_decl_line : 11
<d0> DW_AT_prototyped : 1
<d0> DW_AT_type : <0xc2>
<d4> DW_AT_low_pc : 0x400684
<d8> DW_AT_high_pc : 0x40068c
<dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<de> DW_AT_GNU_all_call_sites: 1
<1><de>: Abbrev Number: 2 (DW_TAG_subprogram)
<df> DW_AT_external : 1
<df> DW_AT_name : bar
<e3> DW_AT_decl_file : 1
<e4> DW_AT_decl_line : 6
<e5> DW_AT_prototyped : 1
<e5> DW_AT_type : <0xc2>
<e9> DW_AT_low_pc : 0x40068c
<ed> DW_AT_high_pc : 0x400690
<f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<f3> DW_AT_GNU_all_call_sites: 1
<1><f3>: Abbrev Number: 5 (DW_TAG_subprogram)
<f4> DW_AT_external : 1
<f4> DW_AT_name : (indirect string, offset: 0x199): main
<f8> DW_AT_decl_file : 1
<f9> DW_AT_decl_line : 21
<fa> DW_AT_prototyped : 1
<fa> DW_AT_type : <0xc2>
<fe> DW_AT_low_pc : 0x400490
<102> DW_AT_high_pc : 0x4004a4
<106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<108> DW_AT_GNU_all_tail_call_sites: 1
[...]
$
-- no sign of the ISA bit anywhere -- frame info:
$ mips-linux-gnu-readelf -wf foobar
[...]
Contents of the .debug_frame section:
00000000 0000000c ffffffff CIE
Version: 1
Augmentation: ""
Code alignment factor: 1
Data alignment factor: -4
Return address column: 31
DW_CFA_def_cfa_register: r29
DW_CFA_nop
00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684
00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c
00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690
00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4
DW_CFA_advance_loc: 6 to 00400496
DW_CFA_def_cfa_offset: 32
DW_CFA_offset: r31 at cfa-4
DW_CFA_advance_loc: 6 to 0040049c
DW_CFA_restore: r31
DW_CFA_def_cfa_offset: 0
DW_CFA_nop
DW_CFA_nop
DW_CFA_nop
[...]
$
-- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange):
$ mips-linux-gnu-readelf -wR foobar
Contents of the .debug_ranges section:
Offset Begin End
00000000 00400680 00400690
00000000 00400490 004004a4
00000000 <End of list>
$
-- no sign of the ISA bit anywhere -- line info:
$ mips-linux-gnu-readelf -wl foobar
Raw dump of debug contents of section .debug_line:
[...]
Offset: 0x27
Length: 78
DWARF Version: 2
Prologue Length: 31
Minimum Instruction Length: 1
Initial value of 'is_stmt': 1
Line Base: -5
Line Range: 14
Opcode Base: 13
Opcodes:
Opcode 1 has 0 args
Opcode 2 has 1 args
Opcode 3 has 1 args
Opcode 4 has 1 args
Opcode 5 has 1 args
Opcode 6 has 0 args
Opcode 7 has 0 args
Opcode 8 has 0 args
Opcode 9 has 1 args
Opcode 10 has 0 args
Opcode 11 has 0 args
Opcode 12 has 1 args
The Directory Table is empty.
The File Name Table:
Entry Dir Time Size Name
1 0 0 0 foobar.c
Line Number Statements:
Extended opcode 2: set Address to 0x400681
Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2
Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4
Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12
Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14
Advance Line by -7 to 7
Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7
Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9
Advance PC by 3 to 0x400690
Extended opcode 1: End of Sequence
Extended opcode 2: set Address to 0x400491
Advance Line by 21 to 22
Copy
Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23
Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22
Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23
Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24
Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23
Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24
Advance PC by 7 to 0x4004a4
Extended opcode 1: End of Sequence
[...]
-- a-ha, the ISA bit is there! However it's not always right for some
reason, I don't have a small test case to show it, but here's an excerpt
from MIPS16 libc, a prologue of a function:
00019630 <__libc_init_first>:
19630: e8a0 jrc ra
19632: 6500 nop
00019634 <_init>:
19634: f000 6a11 li v0,17
19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54>
1963c: f400 3240 sll v0,16
19640: e269 addu v0,v1
19642: 659a move gp,v0
19644: 64f6 save 48,ra,s0-s1
19646: 671c move s0,gp
19648: d204 sw v0,16(sp)
1964a: f352 984c lw v0,-27828(s0)
1964e: 6724 move s1,a0
and the corresponding DWARF-2 line info:
Line Number Statements:
Extended opcode 2: set Address to 0x19631
Advance Line by 44 to 45
Copy
Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48
Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53
Advance PC by constant 17 to 0x19646
Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59
Advance Line by -6 to 53
Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53
Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59
Advance Line by -6 to 53
Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53
-- see that "Advance PC by constant 17" there? It clears the ISA bit,
however code at 0x19646 is not standard MIPS code at all. For some
reason the constant is always 17, I've never seen DW_LNS_const_add_pc
used with any other value -- is that a binutils bug or what?
3. Solution:
I think we should retain the value of the ISA bit in code references,
that is effectively treat them as cookies as they indeed are (although
trivially calculated) rather than raw memory byte addresses.
In a perfect world both the static symbol table and the respective
DWARF-2 records should be fixed to include the ISA bit in all the cases.
I think however that this is infeasible.
All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be
tracked down. This function is used by `elf_slurp_symbol_table' that in
turn is used by `bfd_canonicalize_symtab' and
`bfd_canonicalize_dynamic_symtab', which are public interfaces.
Similarly DWARF-2 records are used outside GDB, one notable if a bit
questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have
identified at least bits in `execute_cfa_program' and
`uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame',
that would need an update as they effectively flip the ISA bit freely;
see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h.
But there may be more places. Any change in how DWARF-2 records are
produced would require an update there and would cause compatibility
problems with libgcc.a binaries already distributed; given that this is
a static library a complex change involving function renames would
likely be required.
I propose therefore to accept the existing inconsistencies and deal with
them entirely within GDB. I have figured out that the ISA bit lost in
various places can still be recovered as long as we have symbol
information -- that'll have the `st_other' attribute correctly set to
one of standard MIPS/MIPS16/microMIPS encoding.
Here's the resulting change. It adds a couple of new `gdbarch' hooks,
one to update symbol information with the ISA bit lost in
`_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2
records as they're processed. The ISA bit is set in each address
handled according to information retrieved from the symbol table for the
symbol spanning the address if any; limits are adjusted based on the
address they point to related to the respective base address.
Additionally minimal symbol information has to be adjusted accordingly
in its gdbarch hook.
With these changes in place some complications with ISA bit juggling in
the PC that never fully worked can be removed from the MIPS backend.
Conversely, the generic dynamic linker event special breakpoint symbol
handler has to be updated to call the minimal symbol gdbarch hook to
record that the symbol is a MIPS16 or microMIPS address if applicable or
the breakpoint will be set at the wrong address and either fail to work
or cause SIGTRAPs (this is because the symbol is handled early on and
bypasses regular symbol processing).
4. Results obtained
The change fixes the example above -- to repeat only the crucial steps:
(gdb) break main
Breakpoint 1 at 0x400491: file foobar.c, line 23.
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb) print foo
$1 = {int (void)} 0x400681 <foo>
(gdb) set foop = bar
(gdb) advance bar
bar () at foobar.c:9
9 }
(gdb) disassemble
Dump of assembler code for function bar:
=> 0x0040068d <+0>: jr ra
0x0040068f <+2>: li v0,2
End of assembler dump.
(gdb) finish
Run till exit from #0 bar () at foobar.c:9
main () at foobar.c:24
24 }
Value returned is $2 = 2
(gdb) continue
Continuing.
[Inferior 1 (process 14128) exited with code 02]
(gdb)
-- excellent!
The change removes about 90 failures per MIPS16 multilib in mips-sde-elf
testing too, results for MIPS16 are now similar to that for standard
MIPS; microMIPS results are a bit worse because of host-I/O problems in
QEMU used instead of MIPSsim for microMIPS testing only:
=== gdb Summary ===
# of expected passes 14299
# of unexpected failures 187
# of expected failures 56
# of known failures 58
# of unresolved testcases 11
# of untested testcases 52
# of unsupported tests 174
MIPS16:
=== gdb Summary ===
# of expected passes 14298
# of unexpected failures 187
# of unexpected successes 2
# of expected failures 54
# of known failures 58
# of unresolved testcases 12
# of untested testcases 52
# of unsupported tests 174
microMIPS:
=== gdb Summary ===
# of expected passes 14149
# of unexpected failures 201
# of unexpected successes 2
# of expected failures 54
# of known failures 58
# of unresolved testcases 7
# of untested testcases 53
# of unsupported tests 175
2014-12-12 Maciej W. Rozycki <macro@codesourcery.com>
Maciej W. Rozycki <macro@mips.com>
Pedro Alves <pedro@codesourcery.com>
gdb/
* gdbarch.sh (elf_make_msymbol_special): Change type to `F',
remove `predefault' and `invalid_p' initializers.
(make_symbol_special): New architecture method.
(adjust_dwarf2_addr, adjust_dwarf2_line): Likewise.
(objfile, symbol): New declarations.
* arch-utils.h (default_elf_make_msymbol_special): Remove
prototype.
(default_make_symbol_special): New prototype.
(default_adjust_dwarf2_addr): Likewise.
(default_adjust_dwarf2_line): Likewise.
* mips-tdep.h (mips_unmake_compact_addr): New prototype.
* arch-utils.c (default_elf_make_msymbol_special): Remove
function.
(default_make_symbol_special): New function.
(default_adjust_dwarf2_addr): Likewise.
(default_adjust_dwarf2_line): Likewise.
* dwarf2-frame.c (decode_frame_entry_1): Call
`gdbarch_adjust_dwarf2_addr'.
* dwarf2loc.c (dwarf2_find_location_expression): Likewise.
* dwarf2read.c (create_addrmap_from_index): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(add_partial_symbol): Likewise.
(add_partial_subprogram): Likewise.
(process_full_comp_unit): Likewise.
(read_file_scope): Likewise.
(read_func_scope): Likewise. Call `gdbarch_make_symbol_special'.
(read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'.
(read_call_site_scope): Likewise.
(dwarf2_ranges_read): Likewise.
(dwarf2_record_block_ranges): Likewise.
(read_attribute_value): Likewise.
(dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'.
(new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'.
* elfread.c (elf_symtab_read): Don't call
`gdbarch_elf_make_msymbol_special' if unset.
* mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip
the ISA bit from the PC.
* mips-tdep.c (mips_unmake_compact_addr): New function.
(mips_elf_make_msymbol_special): Set the ISA bit in the symbol's
address appropriately.
(mips_make_symbol_special): New function.
(mips_pc_is_mips): Set the ISA bit before symbol lookup.
(mips_pc_is_mips16): Likewise.
(mips_pc_is_micromips): Likewise.
(mips_pc_isa): Likewise.
(mips_adjust_dwarf2_addr): New function.
(mips_adjust_dwarf2_line): Likewise.
(mips_read_pc, mips_unwind_pc): Keep the ISA bit.
(mips_addr_bits_remove): Likewise.
(mips_skip_trampoline_code): Likewise.
(mips_write_pc): Don't set the ISA bit.
(mips_eabi_push_dummy_call): Likewise.
(mips_o64_push_dummy_call): Likewise.
(mips_gdbarch_init): Install `mips_make_symbol_special',
`mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch
handlers.
* solib.c (gdb_bfd_lookup_symbol_from_symtab): Get
target-specific symbol address adjustments.
* gdbarch.h: Regenerate.
* gdbarch.c: Regenerate.
2014-12-12 Maciej W. Rozycki <macro@codesourcery.com>
gdb/testsuite/
* gdb.base/func-ptrs.c: New file.
* gdb.base/func-ptrs.exp: New file.
|
|
After removal of the regset_alloc invocations, the appropriate tdep
fields become obsolete and are thus removed.
|
|
|
|
(in_plt_section): Remove name argument, replace prototype with
static inline function.
* mips-tdep.h: Include "objfiles.h".
(in_mips_stubs_section): New function.
* hppa-tdep.h (gdbarch_tdep): Remove name argument of
in_solib_call_trampoline member.
(hppa_in_solib_call_trampoline): Remove name argument.
* objfiles.c (pc_in_section): New function.
(in_plt_section): Remove function.
* mips-linux-tdep.c: Include "objfiles.h".
(mips_linux_in_dynsym_stub): Call in_mips_stubs_section. Remove
name argument. Return 1 rather than the low 16-bit halfword of
any instruction examined.
(mips_linux_in_dynsym_resolve_code): Update
mips_linux_in_dynsym_stub call accordingly.
* mips-tdep.c (mips_stub_frame_sniffer): Use in_mips_stubs_section
rather than an equivalent hand-coded sequence.
* hppa-hpux-tdep.c (in_opd_section): Remove function.
(hppa32_hpux_in_solib_call_trampoline): Remove name argument.
(hppa64_hpux_in_solib_call_trampoline): Likewise.
(hppa64_hpux_find_global_pointer): Use pc_in_section rather than
in_opd_section.
* hppa-tdep.c (hppa_stub_unwind_sniffer): Remove name argument
on call to tdep->in_solib_call_trampoline.
(hppa_in_solib_call_trampoline): Remove name argument, update
according to in_plt_section change.
(hppa_skip_trampoline_code): Update according to in_plt_section
change.
* aarch64-tdep.c (aarch64_stub_unwind_sniffer): Likewise.
* arm-symbian-tdep.c (arm_symbian_skip_trampoline_code):
Likewise.
* arm-tdep.c (arm_stub_unwind_sniffer): Likewise.
* hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise.
* hppabsd-tdep.c (hppabsd_find_global_pointer): Likewise.
* nios2-tdep.c (nios2_stub_frame_sniffer): Likewise.
* nto-tdep.c (nto_relocate_section_addresses): Likewise.
* s390-tdep.c (s390_stub_frame_sniffer): Likewise.
* sh-tdep.c (sh_stub_unwind_sniffer): Likewise.
* solib-dsbt.c (dsbt_in_dynsym_resolve_code): Likewise.
* solib-frv.c (frv_in_dynsym_resolve_code): Likewise.
* solib-svr4.c (svr4_in_dynsym_resolve_code): Likewise.
* solib-target.c (solib_target_in_dynsym_resolve_code): Likewise.
* sparc-tdep.c (sparc_analyze_prologue): Likewise.
* tic6x-tdep.c (tic6x_stub_unwind_sniffer): Likewise.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
* NEWS: Add microMIPS support and "set mips compression",
"show mips compression" commands.
* mips-tdep.h (mips_isa): New enum.
(gdbarch_tdep): Add mips_isa.
(mips_pc_is_mips16): Update prototype.
(mips_pc_is_mips, mips_pc_is_micromips): New prototypes.
* mips-tdep.c (mips_compression_mips16): New variable.
(mips_compression_micromips): Likewise.
(mips_compression_strings): Likewise.
(mips_compression_string): Likewise.
(is_mips16_isa, is_micromips_isa): New functions.
(is_mips16_addr): Rename to...
(is_compact_addr): ... this.
(unmake_mips16_addr): Likewise to...
(unmake_compact_addr): ... this.
(make_mips16_addr): Likewise to...
(make_compact_addr): ... this.
(is_mips_addr, is_mips16_addr, is_micromips_addr): New
functions.
(mips_elf_make_msymbol_special): Handle microMIPS code.
(msymbol_is_special): Rename to...
(msymbol_is_mips16): ... this.
(mips_make_symbol_special, mips_pc_is_mips16): Update
accordingly.
(msymbol_is_mips, msymbol_is_micromips): New functions.
(mips16_to_32_reg): Rename to...
(mips_reg3_to_reg): ... this.
(mips_pc_is_mips, mips_pc_is_micromips): New functions.
(mips_pc_isa): Likewise.
(mips_read_pc, mips_unwind_pc, mips_write_pc): Handle microMIPS
code.
(mips_fetch_instruction): Pass return status instead of printing
an error message if requested. Handle microMIPS code. Bail out
on an invalid ISA.
(micromips_op): New macro.
(b0s4_imm, b0s5_imm, b0s5_reg, b0s7_imm, b0s10_imm): Likewise.
(b1s9_imm, b2s3_cc, b4s2_regl, b5s5_op, b5s5_reg): Likewise.
(b6s4_op, b7s3_reg): Likewise.
(b0s6_op, b0s11_op, b0s12_imm, b0s16_imm, b0s26_imm): Likewise.
(b6s10_ext, b11s5_reg, b12s4_op): Likewise.
(mips_insn_size): New function.
(mips32_next_pc): Update mips_fetch_instruction call.
(micromips_relative_offset7): New function.
(micromips_relative_offset10): Likewise.
(micromips_relative_offset16): Likewise.
(micromips_pc_insn_size): Likewise.
(micromips_bc1_pc): Likewise.
(micromips_next_pc): Likewise.
(unpack_mips16): Update mips_fetch_instruction call.
(extended_mips16_next_pc): Update according to change to
mips16_to_32_reg.
(mips_next_pc): Update mips_pc_is_mips16 call. Handle microMIPS
code.
(mips16_scan_prologue): Update mips_fetch_instruction call.
Update according to change to mips16_to_32_reg.
(mips_insn16_frame_sniffer): Update mips_pc_is_mips16 call.
(mips_insn16_frame_base_sniffer): Likewise.
(micromips_decode_imm9): New function.
(micromips_scan_prologue): Likewise.
(mips_micro_frame_cache): Likewise.
(mips_micro_frame_this_id): Likewise.
(mips_micro_frame_prev_register): Likewise.
(mips_micro_frame_sniffer): Likewise.
(mips_micro_frame_unwind): New variable.
(mips_micro_frame_base_address): New function.
(mips_micro_frame_base): New variable.
(mips_micro_frame_base_sniffer): New function.
(mips32_scan_prologue): Update mips_fetch_instruction call.
(mips_insn32_frame_sniffer): Check for the standard MIPS ISA
rather than for MIPS16.
(mips_insn32_frame_base_sniffer): Likewise.
(mips_addr_bits_remove): Handle microMIPS code.
(deal_with_atomic_sequence): Rename to...
(mips_deal_with_atomic_sequence): ... this. Update the type
of the variable used to hold an instruction. Remove the ISA bit
check. Update mips_fetch_instruction call.
(micromips_deal_with_atomic_sequence): New function.
(deal_with_atomic_sequence): Likewise.
(mips_about_to_return): Handle microMIPS code. Update
mips_fetch_instruction call.
(heuristic_proc_start): Check for the standard MIPS ISA rather
than for MIPS16. Update mips_pc_is_mips16 and
mips_fetch_instruction calls. Handle microMIPS code.
(mips_push_dummy_code): Handle microMIPS code.
(mips_eabi_push_dummy_call): Likewise.
(mips_o32_return_value): Update mips_pc_is_mips16 call.
(mips_o64_push_dummy_call): Handle microMIPS code.
(mips_o64_return_value): Update mips_pc_is_mips16 call.
(is_delayed): Remove function.
(mips_single_step_through_delay): Replace the call to is_delayed
with mips32_instruction_has_delay_slot. Correct MIPS16 handling.
Handle microMIPS code.
(mips_skip_prologue): Update mips_pc_is_mips16 call. Handle
microMIPS code.
(mips32_in_function_epilogue_p): Update mips_fetch_instruction
call.
(micromips_in_function_epilogue_p): New function.
(mips16_in_function_epilogue_p): Update mips_fetch_instruction
call.
(mips_in_function_epilogue_p): Update mips_pc_is_mips16 call.
Handle microMIPS.
(gdb_print_insn_mips): Likewise.
(mips_breakpoint_from_pc): Likewise.
(mips_remote_breakpoint_from_pc): New function.
(mips32_instruction_has_delay_slot): Simplify making use of the
updated mips_fetch_instruction interface.
(micromips_instruction_has_delay_slot): New function.
(mips16_instruction_has_delay_slot): Simplify making use of the
updated mips_fetch_instruction interface.
(mips_adjust_breakpoint_address): Check for the standard MIPS
ISA rather than for MIPS16 ISA. Update for unmake_compact_addr
calls. Handle microMIPS code.
(mips_get_mips16_fn_stub_pc): Update mips_fetch_instruction call.
(mips_skip_trampoline_code): Handle microMIPS code.
(global_mips_compression): New function.
(mips_gdbarch_init): Handle the compressed ISA setting from ELF
file flags. Register the microMIPS remote breakpoint handler
and heuristic frame unwinder.
(show_mips_compression): New function.
(_initialize_mips_tdep): Add the "set mips compression" and
"show mips compression" commands.
gdb/doc/
* gdb.texinfo (MIPS): Document "set mips compression" and "show
mips compression".
(MIPS Breakpoint Kinds): New subsubsection.
|
|
* mips-tdep.c (mips_write_pc): Make external, add description.
* mips-linux-tdep.c (mips_linux_write_pc): Use mips_write_pc,
add description.
|
|
* infrun.c (handle_inferior_event): Move the check for return
trampolines ahead of the check for function trampolines.
* mips-tdep.h (MIPS_S2_REGNUM, MIPS_GP_REGNUM): New macros.
* mips-tdep.c (mips_str_mips16_call_stub): New variable.
(mips_str_mips16_ret_stub): Likewise.
(mips_str_call_fp_stub): Likewise.
(mips_str_call_stub): Likewise.
(mips_str_fn_stub): Likewise.
(mips_str_pic): Likewise.
(mips_in_frame_stub): New function.
(mips_unwind_pc): Return the return address rather than the PC
if the PC of an intermediate frame is inside a call thunk.
(mips_is_stub_suffix): New function.
(mips_is_stub_mode): Likewise.
(mips_get_mips16_fn_stub_pc): Likewise.
(mips_skip_mips16_trampoline_code): Update to handle all the
currently generated stub types. Don't recurse into __fn_stub
thunks. Remove heuristics to handle stubs beyond etext/_etext.
Use cooked register accesses.
(mips_in_return_stub): Reintroduce function.
(mips_skip_trampoline_code): Traverse trampolines recursively.
(mips_gdbarch_init): Handle MIPS16 return trampolines.
gdb/testsuite/
* gdb.arch/mips16-thunks-inmain.c: New file.
* gdb.arch/mips16-thunks-main.c: New file.
* gdb.arch/mips16-thunks-sin.c: New file.
* gdb.arch/mips16-thunks-sinfrob.c: New file.
* gdb.arch/mips16-thunks-sinfrob16.c: New file.
* gdb.arch/mips16-thunks-sinmain.c: New file.
* gdb.arch/mips16-thunks-sinmips16.c: New file.
* gdb.arch/mips16-thunks.exp: New file.
|
|
* features/mips-dsp.xml: New file.
* features/mips64-dsp.xml: New file.
* features/mips-dsp-linux.xml: New file.
* features/mips64-dsp-linux.xml: New file.
* features/Makefile (WHICH): Add mips-dsp-linux and
mips64-dsp-linux.
(mips-dsp-expedite, mips64-dsp-expedite): New variables.
* features/mips-dsp-linux.c: New file.
* features/mips64-dsp-linux.c: New file.
* regformats/mips-dsp-linux.dat: New file.
* regformats/mips64-dsp-linux.dat: New file.
* mips-linux-nat.c (mips_linux_register_addr): Handle DSP
registers.
(mips64_linux_register_addr): Likewise.
(mips64_linux_regsets_fetch_registers): Likewise.
(mips64_linux_regsets_store_registers): Likewise.
(mips64_linux_fetch_registers): Update call to
mips64_linux_regsets_fetch_registers.
(mips64_linux_store_registers): Update call to
mips64_linux_regsets_store_registers.
(mips_linux_read_description): Probe for DSP registers.
(_initialize_mips_linux_nat): Call initialize_tdesc_mips_dsp_linux
and initialize_tdesc_mips64_dsp_linux.
* mips-linux-tdep.c (supply_gregset, mips64_supply_gregset):
Remove padding of no longer used embedded register slots.
* mips-linux-tdep.h (DSP_BASE, DSP_CONTROL): New macros.
(MIPS_RESTART_REGNUM): Redefine enum value.
* mips-tdep.c (mips_generic_reg_names): Remove trailing null
strings.
(mips_tx39_reg_names): Likewise.
(mips_linux_reg_names): New array of register names for Linux
targets.
(mips_register_name): Check for a null pointer in
mips_processor_reg_names and return an empty string.
(mips_register_type): Exclude embedded registers for the IRIX
and Linux ABIs.
(mips_pseudo_register_type): Likewise. Use dynamic numbers to
refer to FP registers, LO, HI, BadVAddr, Cause and PC. Handle
DSP registers.
(mips_stab_reg_to_regnum): Handle DSP accumulators.
(mips_dwarf_dwarf2_ecoff_reg_to_regnum): Likewise.
(mips_gdbarch_init): Likewise. Initialize internal register
indices for the Linux ABI. Use dynamic numbers to refer to
registers, as applicable, while parsing the target description.
* mips-tdep.h (struct mips_regnum): Add dspacc/dspctl offsets.
gdb/doc/
* gdb.texinfo (MIPS Features): Add org.gnu.gdb.mips.dsp.
gdb/gdbserver/
* linux-low.h (linux_target_ops): Add regset_bitmap member.
* linux-low.c (use_linux_regsets): New macro.
[!HAVE_LINUX_REGSETS] (regsets_fetch_inferior_registers): Likewise.
[!HAVE_LINUX_REGSETS] (regsets_store_inferior_registers): Likewise.
(linux_register_in_regsets): New function.
(usr_fetch_inferior_registers): Skip registers covered by
regsets.
(usr_store_inferior_registers): Likewise.
(usr_fetch_inferior_registers): New macro.
(usr_store_inferior_registers): Likewise.
(linux_fetch_registers): Handle mixed regset/non-regset targets.
(linux_store_registers): Likewise.
* linux-mips-low.c (init_registers_mips_dsp_linux): New
prototype.
(init_registers_mips64_dsp_linux): Likewise.
(init_registers_mips_linux): New macro.
(init_registers_mips_dsp_linux): Likewise.
(mips_dsp_num_regs): Likewise.
(DSP_BASE, DSP_CONTROL): New fallback macros.
(mips_base_regs): New macro.
(mips_regmap): Use it. Fix the size.
(mips_dsp_regmap): New variable.
(mips_dsp_regset_bitmap): Likewise.
(mips_arch_setup): New function.
(mips_cannot_fetch_register): Use the_low_target.regmap rather
than mips_regmap.
(mips_cannot_store_register): Likewise.
(the_low_target): Update .arch_setup, .num_regs and .regmap
initializers. Add .regset_bitmap initializer.
* linux-arm-low.c (the_low_target): Add .regset_bitmap
initializer.
* linux-bfin-low.c (the_low_target): Likewise.
* linux-cris-low.c (the_low_target): Likewise.
* linux-crisv32-low.c (the_low_target): Likewise.
* linux-ia64-low.c (the_low_target): Likewise.
* linux-m32r-low.c (the_low_target): Likewise.
* linux-m68k-low.c (the_low_target): Likewise.
* linux-ppc-low.c (the_low_target): Likewise.
* linux-s390-low.c (the_low_target): Likewise.
* linux-sh-low.c (the_low_target): Likewise.
* linux-sparc-low.c (the_low_target): Likewise.
* linux-tic6x-low.c (the_low_target): Likewise.
* linux-x86-low.c (the_low_target): Likewise.
* linux-xtensa-low.c (the_low_target): Likewise.
* configure.srv <mips*-*-linux*>: Add mips-dsp-linux.o and
mips64-dsp-linux.o to srv_regobj. Add mips-dsp-linux.xml,
mips64-dsp-linux.xml, mips-dsp.xml and mips64-dsp.xml to
srv_xmlfiles.
* Makefile.in (mips-dsp-linux.o, mips-dsp-linux.c): New targets.
(mips64-dsp-linux.o, mips64-dsp-linux.c): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Add "mips-dsp.xml" to the list of MIPS
core registers.
|
|
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
|
* m2-exp.y: Comment cleanup, mostly periods and spaces.
* m2-lang.c: Ditto.
* m2-typeprint.c: Ditto.
* m2-valprint.c: Ditto.
* m32c-tdep.c: Ditto.
* m32r-linux-nat.c: Ditto.
* m32r-rom.c: Ditto.
* m32r-tdep.c: Ditto.
* m32r-tdep.h: Ditto.
* m68hc11-tdep.c: Ditto.
* m58klinux-nat.c: Ditto.
* m68k-tdep.c: Ditto.
* m88k-tdep.c: Ditto.
* m88k-tdep.h: Ditto.
* machoread.c: Ditto.
* macrocmd.c: Ditto.
* macroexp.c: Ditto.
* macrotab.c: Ditto.
* main.c: Ditto.
* maint.c: Ditto.
* mdebugread.c: Ditto.
* mdebugread.h: Ditto.
* memattr.c: Ditto.
* memattr.h: Ditto.
* memory-map.h: Ditto.
* mep-tdep.c: Ditto.
* microblaze-rom.c: Ditto.
* microblaze-tdep.c: Ditto.
* minsyms.c: Ditto.
* mips-irix-tdep.c: Ditto.
* mips-linux-nat.c: Ditto.
* mips-linux-tdep.c: Ditto.
* mips-linux-tdep.h: Ditto.
* mipsnbsd-nat.c: Ditto.
* mipsnbsd-tdep.c: Ditto.
* mipsread.c: Ditto.
* mips-tdep.c: Ditto.
* mips-tdep.h: Ditto.
* mn10300-linux-tdep.c: Ditto.
* mn10300-tdep.c: Ditto.
* mn10300-tdep.h: Ditto.
* monitor.c: Ditto.
* monitor.h: Ditto.
* moxie-tdep.c: Ditto.
* moxie-tdep.h: Ditto.
* mt-tdep.c: Ditto.
|
|
|
|
* mips-linux-tdep.c(regset.h): New include.
(mips_supply_gregset_wrapper, mips_fill_gregset_wrapper,
mips_supply_fpregset_wrapper, mips_fill_fpregset_wrapper,
mips64_supply_gregset_wrapper, mips64_fill_gregset_wrapper,
mips64_supply_fpregset_wrapper, mips64_fill_fpregset_wrapper,
mips_linux_regset_from_core_section): New functions.
(fetch_core_registers, regset_core_fns): Deleted.
(mips_linux_init_abi): Add mips_linux_regset_from_core_section.
Deleted regset_core_fns.
* mips-tdep.c(mips_gdbarch_init): Initialize tdep->gregset,
tdep->gregset64, tdep->fpregset and tdep->fpregset64.
* mips-tdep.h(gdbarch_tdep): Add gregset, gregset64, fpregset
and fpregset64.
|
|
Automatic update by copyright.sh.
|
|
|
|
(mips_linux_init_abi): Set tdep->syscall_next_pc.
* mips-tdep.c (enum mips_fpu_type, struct gdbarch_tdep): Move to
mips-tdep.h.
(mips32_next_pc): Handle the syscall instruction.
* mips-tdep.h (enum mips_fpu_type, struct gdbarch_tdep): New,
from mips-tdep.c. Add syscall_next_pc to gdbarch_tdep.
|
|
|
|
* corelow.c (core_read_description): New.
(init_core_ops): Set to_read_description.
* gdbarch.sh: Add gdbarch_core_read_description.
* mips-linux-tdep.c (mips_linux_core_read_description): New.
(mips_linux_init_abi): Call set_gdbarch_core_read_description.
* mips-tdep.c (mips_tdesc_gp32, mips_tdesc_gp64): New.
(mips_register_g_packet_guesses): Use them.
(_initialize_mips_tdep): Initialize them.
* mips-tdep.h (mips_tdesc_gp32, mips_tdesc_gp64): Declare.
* gdbarch.h, gdbarch.c: Regenerated.
|
|
Switch the license of all .h files to GPLv3.
Switch the license of all .cc files to GPLv3.
|
|
FRAME argument.
* gdbarch.c, gdbarch.h: Regenerate.
* infrun.c (resume): Pass current frame to SOFTWARE_SINGLE_STEP.
* alpha-tdep.c (alpha_next_pc): Add FRAME argument. Retrieve
registers from FRAME instead of using read_register.
(alpha_software_single_step): Replace REGCACHE by FRAME. Pass FRAME
to alpha_next_pc. Use get_frame_pc instead of read_pc.
* alpha-tdep.h (alpha_software_single_step): Replace REGCACHE
argument by FRAME.
* arm-tdep.c (shifted_reg_val): Add FRAME argument. Read registers
from FRAME instead of using read_register.
(thumb_get_next_pc): Likewise.
(arm_get_next_pc): Likewise.
(arm_software_single_step): Replace REGCACHE by FRAME. Pass FRAME
to arm_get_next_pc. Use get_frame_pc instead of read_register.
* arm-tdep.h (arm_software_single_step): Replace REGCACHE
argument by FRAME.
* cris-tdep.c (find_step_target): Add FRAME argument. Read registers
from FRAME instead of using read_register.
(cris_software_single_step): Replace REGCACHE by FRAME. Pass FRAME
to find_step_target.
* mips-tdep.c (mips32_next_pc): Add FRAME argument. Read registers
from FRAME instead of using read_register / read_signed_register.
(extended_mips16_next_pc): Likewise.
(mips16_next_pc): Likewise.
(mips_next_pc): Likewise.
(mips_software_single_step): Replace REGCACHE by FRAME. Pass FRAME
to mips_next_pc. Use get_frame_pc instead of read_pc.
* mips-tdep.h (mips_software_single_step): Replace REGCACHE
argument by FRAME.
* rs6000-tdep.c (branch_dest): Add FRAME argument. Use it instead
of current frame. Read registers from FRAME.
(deal_with_atomic_sequence): Add FRAME argument. Pass it to
branch_dest. Use get_frame_pc instead of read_pc.
(rs6000_software_single_step): Likewise.
(bl_to_blrl_insn_p): Do not call branch_dest.
* rs6000-tdep.h (rs6000_software_single_step): Replace REGCACHE
argument by FRAME.
* sparc64-linux-tdep.c (sparc64_linux_step_trap): Add FRAME argument.
Read registers from FRAME instead of current regcache.
* sparc-linux-tdep.c (sparc32_linux_step_trap): Likewise.
* sparcnbsd-tdep.c (sparcnbsd_step_trap): Likewise.
* sparc-tdep.c (sparc_address_from_register): Remove.
(sparc_analyze_control_transfer): Pass FRAME argument instead of
GDBARCH. Pass FRAME to step_trap callback.
(sparc_step_trap): Add FRAME argument.
(space_software_single_step): Replace REGCACHE by FRAME. Pass FRAME
to sparc_analyze_control_transfer. Read registers from FRAME instead
of calling sparc_address_from_register.
* sparc-tdep.h (struct gdbarch_tdep): Add FRAME argument to
step_trap callback.
(sparc_address_from_register): Remove prototype.
(sparc_software_single_step): Replace REGCACHE argument by FRAME.
(sparcnbsd_step_trap): Add FRAME argument.
* spu-tdep.c (spu_software_single_step): Replace REGCACHE argument
by FRAME. Read registers from FRAME instead of REGCACHE.
|
|
* alpha-nat.c (fetch_osf_core_registers): Update comment.
* arm-tdep.h (enum gdb_regnum): Remove obsolete part of comment.
* hppa-tdep.h (enum hppa_regnum): Likewise.
* mips-tdep.h: Likewise.
* m68hc11-tdep.c: Likewise.
|
|
"sig" arguments, add "regcache" argument.
* gdbarch.c, gdbarch.h: Regenerate.
* infrun.c (resume): Update SOFTWARE_SINGLE_STEP call arguments.
(handle_inferior_event): Call remove_single_step_breakpoints directly
instead of calling SOFTWARE_SINGLE_STEP to remove breakpoints.
* alpha-tdep.c (alpha_software_single_step): Update argument list.
Remove handling of !insert_breakpoints_p case.
* arm-tdep.c (arm_software_single_step): Likewise.
* cris-tdep.c (cris_software_single_step): Likewise.
* mips-tdep.c (mips_software_single_step): Likewise.
* rs6000-tdep.c (rs6000_software_single_step): Likewise.
* sparc-tdep.c (sparc_software_single_step): Likewise.
* spu-tdep.c (spu_software_single_step): Likewise.
* alpha-tdep.h (alpha_software_single_step): Update prototype.
* mips-tdep.h (mips_software_single_step): Likewise.
* rs6000-tdep.h (rs6000_software_single_step): Likewise.
* sparc-tdep.h (sparc_software_single_step): Likewise.
|
|
* gdbarch.sh (software_single_step): Change the return type
from void to int and reformatted some comments to <= 80
columns.
* gdbarch.c, gdbarch.h: Regenerated.
* alpha-tdep.c (alpha_software_single_step): Likewise.
* alpha-tdep.h (alpha_software_single_step): Likewise.
* arm-tdep.c (arm_software_single_step): Likewise.
* cris-tdep.c (cris_software_single_step): Likewise.
* mips-tdep.c (mips_software_single_step): Likewise.
* mips-tdep.h (mips_software_single_step): Likewise.
* rs6000-tdep.c (rs6000_software_single_step): Likewise.
* rs6000-tdep.h (rs6000_software_single_step): Likewise.
* sparc-tdep.c (sparc_software_single_step): Likewise.
* sparc-tdep.h (sparc_software_single_step): Likewise.
* spu-tdep.c (spu_software_single_step): Likewise.
* infrun.c (resume): Check the return value from SOFTWARE_SINGLE_STEP
and act accordingly.
|
|
* configure.tgt: Move mips*-*-pe and sh*-*-pe to
the obsoletion stanza.
* NEWS: Mention deleted targets.
* config/sh/tm-wince.h: Remove.
* config/sh/wince.mt: Remove.
* config/mips/tm-wince.h: Remove.
* config/mips/wince.mt: Remove.
* wince.c: Remove.
* wince-stub.c: Remove.
* wince-stub.h: Remove.
* Makefile.in (wince.o): Remove rule.
(wince-stub.o): Likewise.
* mips-tdep.c (mips_next_pc): Make static.
* mips-tdep.h (mips_next_pc): Remove declaration.
* arm-tdep.c (arm_pc_is_thumb): Make static.
(thumb_get_next_pc): Likewise.
(arm_get_next_pc): Likewise.
* arm-tdep.h (arm_pc_is_thumb_dummy): Remove declaration.
(arm_pc_is_thumb): Likewise.
(thumb_get_next_pc): Likewise.
(arm_get_next_pc): Likewise.
gdb/doc/
* gdb.texinfo (WinCE): Delete obsolete subsection.
|
|
|
|
* arm-tdep.c:
* ia64-tdep.c:
* i386-tdep.c:
* hpread.c:
* hppa-tdep.c:
* hppa-hpux-tdep.c:
* gnu-nat.c:
* gdbtypes.c:
* gdbarch.h:
* gdbarch.c:
* eval.c:
* dwarf2read.c:
* dbxread.c:
* copying:
* symfile.c:
* stabsread.c:
* sh64-tdep.c:
* sh-tdep.c:
* s390-tdep.c:
* rs6000-tdep.c:
* remote.c:
* remote-mips.c:
* mips-tdep.c:
* mdebugread.c:
* linux-nat.c:
* infrun.c:
* xcoffread.c:
* win32-nat.c:
* valops.c:
* utils.c:
* tracepoint.c:
* target.c:
* symtab.c:
* c-exp.y:
* ada-valprint.c:
* ada-typeprint.c:
* ada-lex.l:
* ada-lang.h:
* ada-lang.c:
* ada-exp.y:
* alphafbsd-tdep.c:
* alphabsd-tdep.h:
* alphabsd-tdep.c:
* alphabsd-nat.c:
* alpha-tdep.h:
* alpha-tdep.c:
* alpha-osf1-tdep.c:
* alpha-nat.c:
* alpha-mdebug-tdep.c:
* alpha-linux-tdep.c:
* alpha-linux-nat.c:
* aix-thread.c:
* abug-rom.c:
* arch-utils.c:
* annotate.h:
* annotate.c:
* amd64obsd-tdep.c:
* amd64obsd-nat.c:
* amd64nbsd-tdep.c:
* amd64nbsd-nat.c:
* amd64fbsd-tdep.c:
* amd64fbsd-nat.c:
* amd64bsd-nat.c:
* amd64-tdep.h:
* amd64-tdep.c:
* amd64-sol2-tdep.c:
* amd64-nat.h:
* amd64-nat.c:
* amd64-linux-tdep.c:
* amd64-linux-nat.c:
* alphanbsd-tdep.c:
* block.h:
* block.c:
* bfd-target.h:
* bfd-target.c:
* bcache.h:
* bcache.c:
* ax.h:
* ax-general.c:
* ax-gdb.h:
* ax-gdb.c:
* avr-tdep.c:
* auxv.h:
* auxv.c:
* armnbsd-tdep.c:
* armnbsd-nat.c:
* arm-tdep.h:
* arm-linux-nat.c:
* arch-utils.h:
* charset.c:
* call-cmds.h:
* c-valprint.c:
* c-typeprint.c:
* c-lang.h:
* c-lang.c:
* buildsym.h:
* buildsym.c:
* bsd-uthread.h:
* bsd-uthread.c:
* bsd-kvm.h:
* bsd-kvm.c:
* breakpoint.h:
* core-regset.c:
* core-aout.c:
* completer.h:
* completer.c:
* complaints.h:
* complaints.c:
* command.h:
* coffread.c:
* coff-solib.h:
* coff-solib.c:
* coff-pe-read.h:
* coff-pe-read.c:
* cli-out.h:
* cli-out.c:
* charset.h:
* dink32-rom.c:
* dictionary.h:
* dictionary.c:
* demangle.c:
* defs.h:
* dcache.h:
* dcache.c:
* d10v-tdep.c:
* cpu32bug-rom.c:
* cp-valprint.c:
* cp-support.h:
* cp-support.c:
* cp-namespace.c:
* cp-abi.h:
* cp-abi.c:
* corelow.c:
* corefile.c:
* environ.c:
* elfread.c:
* dwarfread.c:
* dwarf2loc.c:
* dwarf2expr.h:
* dwarf2expr.c:
* dwarf2-frame.h:
* dwarf2-frame.c:
* dve3900-rom.c:
* dummy-frame.h:
* dummy-frame.c:
* dsrec.c:
* doublest.h:
* doublest.c:
* disasm.h:
* disasm.c:
* fork-child.c:
* findvar.c:
* fbsd-nat.h:
* fbsd-nat.c:
* f-valprint.c:
* f-typeprint.c:
* f-lang.h:
* f-lang.c:
* expression.h:
* expprint.c:
* exec.h:
* exec.c:
* exceptions.h:
* exceptions.c:
* event-top.h:
* event-top.c:
* event-loop.h:
* event-loop.c:
* gdb.c:
* gdb-stabs.h:
* gdb-events.h:
* gdb-events.c:
* gcore.c:
* frv-tdep.h:
* frv-tdep.c:
* frv-linux-tdep.c:
* frame.h:
* frame.c:
* frame-unwind.h:
* frame-unwind.c:
* frame-base.h:
* frame-base.c:
* gdb_vfork.h:
* gdb_thread_db.h:
* gdb_string.h:
* gdb_stat.h:
* gdb_regex.h:
* gdb_ptrace.h:
* gdb_proc_service.h:
* gdb_obstack.h:
* gdb_locale.h:
* gdb_dirent.h:
* gdb_curses.h:
* gdb_assert.h:
* gdbarch.sh:
* gdb.h:
* hpux-thread.c:
* hppabsd-nat.c:
* hppa-tdep.h:
* hpacc-abi.c:
* h8300-tdep.c:
* gregset.h:
* go32-nat.c:
* gnu-v3-abi.c:
* gnu-v2-abi.h:
* gnu-v2-abi.c:
* gnu-nat.h:
* glibc-tdep.c:
* gdbtypes.h:
* gdbcore.h:
* gdbcmd.h:
* i386nbsd-tdep.c:
* i386nbsd-nat.c:
* i386gnu-tdep.c:
* i386gnu-nat.c:
* i386fbsd-tdep.c:
* i386fbsd-nat.c:
* i386bsd-tdep.c:
* i386bsd-nat.h:
* i386bsd-nat.c:
* i386-tdep.h:
* i386-sol2-nat.c:
* i386-nto-tdep.c:
* i386-nat.c:
* i386-linux-tdep.h:
* i386-linux-tdep.c:
* i386-linux-nat.c:
* i386-cygwin-tdep.c:
* inf-ttrace.c:
* inf-ptrace.h:
* inf-ptrace.c:
* inf-loop.h:
* inf-loop.c:
* inf-child.h:
* inf-child.c:
* ia64-tdep.h:
* ia64-linux-nat.c:
* i387-tdep.h:
* i387-tdep.c:
* i386v4-nat.c:
* i386v-nat.c:
* i386obsd-tdep.c:
* i386obsd-nat.c:
* kod.c:
* jv-valprint.c:
* jv-typeprint.c:
* jv-lang.h:
* jv-lang.c:
* irix5-nat.c:
* iq2000-tdep.c:
* interps.h:
* interps.c:
* inftarg.c:
* inflow.h:
* inflow.c:
* inferior.h:
* infcmd.c:
* infcall.h:
* infcall.c:
* inf-ttrace.h:
* m32r-tdep.h:
* m32r-tdep.c:
* m32r-rom.c:
* m32r-linux-tdep.c:
* m32r-linux-nat.c:
* m2-valprint.c:
* m2-typeprint.c:
* m2-lang.h:
* m2-lang.c:
* lynx-nat.c:
* linux-thread-db.c:
* linux-nat.h:
* linespec.c:
* libunwind-frame.h:
* libunwind-frame.c:
* language.h:
* language.c:
* macroexp.c:
* macrocmd.c:
* m88kbsd-nat.c:
* m88k-tdep.h:
* m88k-tdep.c:
* m68klinux-tdep.c:
* m68klinux-nat.c:
* m68kbsd-tdep.c:
* m68kbsd-nat.c:
* m68k-tdep.h:
* m68k-tdep.c:
* mips-linux-nat.c:
* mips-irix-tdep.c:
* minsyms.c:
* memattr.h:
* memattr.c:
* mem-break.c:
* mdebugread.h:
* main.h:
* main.c:
* macrotab.h:
* macrotab.c:
* macroscope.h:
* macroscope.c:
* macroexp.h:
* nbsd-tdep.c:
* mt-tdep.c:
* monitor.h:
* monitor.c:
* mn10300-tdep.h:
* mn10300-tdep.c:
* mn10300-linux-tdep.c:
* mipsv4-nat.c:
* mipsread.c:
* mipsnbsd-tdep.h:
* mipsnbsd-tdep.c:
* mipsnbsd-nat.c:
* mips64obsd-tdep.c:
* mips64obsd-nat.c:
* mips-tdep.h:
* mips-mdebug-tdep.c:
* mips-linux-tdep.c:
* osabi.h:
* osabi.c:
* ocd.h:
* ocd.c:
* observer.c:
* objfiles.h:
* objfiles.c:
* objc-lang.h:
* objc-lang.c:
* objc-exp.y:
* nto-tdep.h:
* nto-tdep.c:
* nto-procfs.c:
* nlmread.c:
* nbsd-tdep.h:
* ppcobsd-tdep.c:
* ppcobsd-nat.c:
* ppcnbsd-tdep.h:
* ppcnbsd-tdep.c:
* ppcnbsd-nat.c:
* ppcbug-rom.c:
* ppc-tdep.h:
* ppc-sysv-tdep.c:
* ppc-linux-tdep.c:
* ppc-linux-nat.c:
* ppc-bdm.c:
* parser-defs.h:
* parse.c:
* p-valprint.c:
* p-typeprint.c:
* p-lang.h:
* p-lang.c:
* remote-fileio.h:
* remote-fileio.c:
* remote-est.c:
* remote-e7000.c:
* regset.h:
* regset.c:
* reggroups.h:
* reggroups.c:
* regcache.h:
* regcache.c:
* proc-why.c:
* proc-service.c:
* proc-events.c:
* printcmd.c:
* ppcobsd-tdep.h:
* sentinel-frame.h:
* sentinel-frame.c:
* scm-valprint.c:
* scm-tags.h:
* scm-lang.h:
* scm-lang.c:
* scm-exp.c:
* s390-tdep.h:
* rom68k-rom.c:
* remote.h:
* remote-utils.c:
* remote-st.c:
* remote-sim.c:
* remote-sds.c:
* remote-rdp.c:
* remote-rdi.c:
* remote-hms.c:
* sim-regno.h:
* shnbsd-tdep.h:
* shnbsd-tdep.c:
* shnbsd-nat.c:
* sh-tdep.h:
* serial.h:
* serial.c:
* ser-unix.h:
* ser-unix.c:
* ser-tcp.c:
* ser-pipe.c:
* ser-go32.c:
* ser-e7kpc.c:
* ser-base.h:
* ser-base.c:
* solib.c:
* solib-svr4.h:
* solib-svr4.c:
* solib-sunos.c:
* solib-som.h:
* solib-som.c:
* solib-pa64.h:
* solib-pa64.c:
* solib-osf.c:
* solib-null.c:
* solib-legacy.c:
* solib-irix.c:
* solib-frv.c:
* solib-aix5.c:
* sol-thread.c:
* sparc64-linux-tdep.c:
* sparc64-linux-nat.c:
* sparc-tdep.h:
* sparc-tdep.c:
* sparc-sol2-tdep.c:
* sparc-sol2-nat.c:
* sparc-nat.h:
* sparc-nat.c:
* sparc-linux-tdep.c:
* sparc-linux-nat.c:
* source.h:
* source.c:
* somread.c:
* solist.h:
* solib.h:
* std-regs.c:
* stack.h:
* stack.c:
* stabsread.h:
* sparcobsd-tdep.c:
* sparcnbsd-tdep.c:
* sparcnbsd-nat.c:
* sparc64obsd-tdep.c:
* sparc64nbsd-tdep.c:
* sparc64nbsd-nat.c:
* sparc64fbsd-tdep.c:
* sparc64fbsd-nat.c:
* sparc64-tdep.h:
* sparc64-tdep.c:
* sparc64-sol2-tdep.c:
* sparc64-nat.c:
* ui-file.c:
* typeprint.h:
* typeprint.c:
* tramp-frame.h:
* tramp-frame.c:
* trad-frame.h:
* trad-frame.c:
* tracepoint.h:
* top.c:
* tobs.inc:
* thread.c:
* terminal.h:
* target.h:
* symfile.h:
* stop-gdb.c:
* vaxbsd-nat.c:
* vax-tdep.h:
* vax-tdep.c:
* vax-nat.c:
* varobj.h:
* varobj.c:
* value.h:
* value.c:
* valprint.h:
* valprint.c:
* v850-tdep.c:
* uw-thread.c:
* user-regs.c:
* ui-out.h:
* ui-out.c:
* ui-file.h:
* xcoffsolib.h:
* xcoffsolib.c:
* wrapper.c:
* wince.c:
* wince-stub.h:
* wince-stub.c:
* vaxobsd-tdep.c:
* vaxnbsd-tdep.c:
* gdb_gcore.sh:
* copying.c:
* configure.ac:
* aclocal.m4:
* acinclude.m4:
* reply_mig_hack.awk:
* observer.sh:
* gdb_mbuild.sh:
* arm-linux-tdep.c:
* blockframe.c:
* dbug-rom.c:
* environ.h:
* dwarf2loc.h:
* gdb-events.sh:
* glibc-tdep.h:
* gdb_wait.h:
* gdbthread.h:
* i386-sol2-tdep.c:
* hppabsd-tdep.c:
* hppa-linux-nat.c:
* hppa-hpux-nat.c:
* ia64-linux-tdep.c:
* infptrace.c:
* linespec.h:
* maint.c:
* mips-mdebug-tdep.h:
* remote-m32r-sdi.c:
* s390-nat.c:
* rs6000-nat.c:
* remote-utils.h:
* sh3-rom.c:
* sh-linux-tdep.c:
* top.h:
* symtab.h:
* symmisc.c:
* symfile-mem.c:
* srec.h:
* user-regs.h:
* version.h:
* valarith.c:
* xstormy16-tdep.c:
* wrapper.h:
* Makefile.in:
* f-exp.y:
* cris-tdep.c:
* cp-name-parser.y:
* procfs.c:
* proc-utils.h:
* proc-flags.c:
* proc-api.c:
* p-exp.y:
* m68hc11-tdep.c:
* m2-exp.y:
* kod.h:
* kod-cisco.c:
* jv-exp.y:
* hppa-linux-tdep.c: Add (c) after Copyright. Update the FSF
address.
|
|
* mips-tdep.h (MIPS_PRID_REGNUM): Add.
* config/mips/tm-mips.h (PRID_REGNUM): Delete.
* mips-tdep.c: Update.
|