| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
I posit that this makes them easier to find.
The other day while working on the wchar_t patch, I had a bit of
trouble finding the DJGPP/go32 tdep bits. My initial reaction was
looking for a go32-specific tdep file, but there's none.
Confirmed that a --host=i586-pc-msdosdjgpp GDB still builds
successfully and includes the i386-go32-tdep.o object.
Confirmed that an --enable-targets=all build of GDB on x86-64
GNU/Linux includes the DJGPP/go32 bits too.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_TARGET_OBS): Add i386-go32-tdep.o.
* configure.tgt: Handle i[34567]86-*-go32* and
i[34567]86-*-msdosdjgpp*.
* i386-tdep.c (i386_svr4_reg_to_regnum):
Make extern.
(i386_go32_init_abi, i386_coff_osabi_sniffer): Moved to
i386-go32-tdep.c.
(_initialize_i386_tdep): DJGPP bits moved to i386-go32-tdep.c.
* i386-go32-tdep.c: New file.
* i386-tdep.h (tdesc_i386_mmx, i386_svr4_reg_to_regnum): New
declarations.
|
|
i386_gdbarch_init already does this unconditionally for all x86 ports.
Tested on x86-64 Fedora 23.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
* i386-tdep.c (i386_elf_init_abi, i386_go32_init_abi): Remove
calls to set_gdbarch_gnu_triplet_regexp.
|
|
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
|
|
The memory disassemble_info::disassembler_options points to is always
owned by the client. I.e., that field is an non-owning, observing
pointer. Thus const makes sense.
Are the include/ and opcodes/ bits OK?
Tested on x86_64 Fedora 23, built with --enable-targets=all.
include/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* dis-asm.h (disassemble_info) <disassembler_options>: Now a
"const char *".
(next_disassembler_option): Constify.
opcodes/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arc-dis.c (parse_option, parse_disassembler_options): Constify.
* arm-dis.c (parse_arm_disassembler_options): Constify.
* ppc-dis.c (powerpc_init_dialect): Constify local.
* vax-dis.c (parse_disassembler_options): Constify.
gdb/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arm-tdep.c (show_disassembly_style_sfunc): Constify local.
* disasm.c (set_disassembler_options): Constify local.
* i386-tdep.c (i386_print_insn): Remove cast and FIXME comment.
|
|
This patch initializes the BND registers before executing the inferior
call. BND registers can be in arbitrary values at the moment of the
inferior call. In case the function being called uses as part of the
parameters BND register, e.g. when passing a pointer as parameter, the
current value of the register will be used. This can cause boundary
violations that are not due to a real bug or even desired by the user.
In this sense the best to be done is set the BND registers to allow
access to the whole memory, i.e. initialized state, before pushing the
inferior call.
2017-03-07 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* i387-tdep.h (i387_reset_bnd_regs): Add function definition.
* i387-tdep.c (i387_reset_bnd_regs): Add function implementation.
* i386-tdep.c (i386_push_dummy_call): Call i387_reset_bnd_regs.
* amd64-tdep (amd64_push_dummy_call): Call i387_reset_bnd_regs.
gdb/testsuite/ChangeLog:
* i386-mpx-call.c: New file.
* i386-mpx-call.exp: New file.
gdb/doc/ChangeLog:
* Memory Protection Extensions: Add information about inferior
calls.
|
|
gdb/
* i386-tdep.c (i386_pseudo_register_read_into_value): Use
I386_MAX_REGISTER_SIZE.
(i386_pseudo_register_write): Likewise.
(i386_process_record): Likewise.
* i387-tdep.c (i387_supply_xsave): Likewise.
* m68k-linux-nat.c (fetch_register): Use M68K_MAX_REGISTER_SIZE.
(store_register): Likewise.
|
|
This patch adds support for the registers added by the
Memory Protection Keys for Userspace (PKU aka PKEYs) feature.
Native and remote debugging are covered by this patch.
The XSAVE area is extended with a new state containing
the 32-bit wide PKRU register. The new register is added to
amd64-avx-mpx_avx512-* tdesc, thus it is renamed accordingly. Also,
respective xstate mask X86_XSTATE_AVX_MPX_AVX512_MASK is renamed to
X86_XSTATE_AVX_MPX_AVX512_PKU_MASK to reflect the new feature set
it supports.
For more information, please refer to the
Intel(R) 64 and IA-32 Architectures Software Developer's
Manual - Septemper 2015
http://www.intel.com/content/dam/www/public/us/en/documents/
manuals/64-ia-32-architectures-software-developer-manual-325462.pdf
gdb/Changelog:
2015-12-08 Michael Sturm <michael.sturm@intel.com>
* NEWS: Mention addition of PKU feature.
* amd64-linux-nat.c (amd64_linux_gregset32_reg_offset): Add PKRU register.
* amd64-linux-tdep.c (features/i386/amd64-avx-mpx-avx512-linux.c): Rename
to...
(features/i386/amd64-avx-mpx-avx512-pku-linux.c): ...this.
(amd64_linux_gregset_reg_offset): Add PKRU register.
(amd64_linux_core_read_description): Rename
X86_XSTATE_AVX_MPX_AVX512_MASK,
rename tdesc_amd64_avx_mpx_avx512_pku_linux.
(_initialize_amd64_linux_tdep): Rename
initialize_tdesc_amd64_avx_mpx_avx512_linux.
* amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Adjust regnum
calculation.
(tdesc_amd64_avx_mpx_avx512_linux): Rename to...
(tdesc_amd64_avx_mpx_avx512_pku_linux): ...this.
* amd64-tdep.c (features/i386/amd64-avx-mpx-avx512-pku.c): Rename to...
(features/i386/amd64-avx-mpx-avx512-pku.c): ...this.
(amd64_pkeys_names): New register name for raw register PKRU.
(amd64_init_abi): Add code to initialize PKRU tdep variables if feature
is present.
(amd64_target_description): Rename X86_XSTATE_AVX_MPX_AVX512_MASK,
rename tdesc_amd64_avx_mpx_avx512.
(_initialize_amd64_tdep): Rename initialize_tdesc_amd64_avx_mpx_avx512.
* amd64-tdep.h (enum amd64_regnum): Add PKRU register.
(AMD64_NUM_REGS): Adjust regnum calculation.
* i386-linux.nat.c (GETXSTATEREGS_SUPPLIES): Extend range of
registers supplied via XSTATE by PKRU register.
* common/x86-xstate.h (X86_XSTATE_PKRU): New macro.
(X86_XSTATE_AVX_MPX_AVX512_MASK): Add PKRU and renamed mask.
(X86_XSTATE_ALL_MASK): Rename X86_XSTATE_AVX_MPX_AVX512_MASK.
(X86_XSTATE_PKRU_SIZE): New macro.
(X86_XSTATE_MAX_SIZE): Adjust size.
(HAS_PKRU(XCR0)): New macro.
(X86_XSTATE_SIZE): Add checkfor PKRU.
* features/Makefile (WHICH): Rename i386/i386-avx-mpx-avx512,
i386/i386-avx-mpx-avx512-linux, i386/amd64-avx-mpx-avx512,
i386/amd64-avx-mpx-avx512-linux.
(i386/i386-avx-mpx-avx512-expedite): Rename expedite.
(i386/i386-avx-mpx-avx512-linux-expedite): Likewise.
(i386/amd64-avx-mpx-avx512-expedite): Likewise.
(i386/amd64-avx-mpx-avx512-linux-expedite): Likewise.
(XMLTOC): Rename i386/amd64-avx-mpx-avx512-linux.xml,
i386/amd64-avx-mpx-avx512.xml, i386/i386-avx-mpx-avx512-linux.xml,
i386/i386-avx-mpx-avx512.xml.
((outdir)/i386/i386-avx-mpx-avx512.dat): Rename rule, add
i386/32bit-pkeys.xml.
((outdir)/i386/i386-avx-mpx-avx512-pku-linux.dat): Likewise.
((outdir)/i386/amd64-avx-mpx-avx512.dat): Rename rule, add
i386/64bit-pkeys.xml.
((outdir)/i386/amd64-avx-mpx-avx512-linux.dat): Likewise.
* features/i386/32bit-pkeys.xml: New file.
* features/i386/64bit-pkeys.xml: Likewise.
* features/i386/amd64-avx-mpx-avx512-linux-pku.c: Regenerate from
renamed XML file.
* features/i386/amd64-avx-mpx-avx512-linux.xml: Rename to
amd64-avx-mpx-avx512-pku-linux.xml, add 64bit-pkeys.xml
* features/i386/amd64-avx-mpx-avx512.c: Regenerate from
renamed XML file.
* features/i386/amd64-avx-mpx-avx512.xml: Rename to
amd64-avx-mpx-avx512-pku.xml, add 64bit-pkeys.xml.
* features/i386/i386-avx-mpx-avx512-linux.c: Regenerate from
renamed XML file.
* features/i386/i386-avx-mpx-avx512-linux.xml: Rename to
i386-avx-mpx-avx512-pku-linux.xml, add 32bit-pkeys.xml.
* features/i386/i386-avx-mpx-avx512.c: Regenerate from
renamed XML file.
* features/i386/i386-avx-mpx-avx512.xml: Rename to
i386-avx-mpx-avx512-pku.xml, add 32bit-pkeys.xml.
* i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Change to use
I386_PKEYS_NUM_REGS.
* i386-linux-tdep.c (features/i386/i386-avx-mpx-avx512-linux.c): Rename
include.
(i386_linux_gregset_reg_offset): Add PKRU register.
(i386_linux_core_read_description): Rename xstate mask and returned
tdesc for X86_XSTATE_AVX_MPX_AVX512_PKU_MASK.
(_initialize_i386_linux_tdep): Rename
initialize_tdesc_i386_avx_mpx_avx512_linux.
* i386-linux-tdep.h (I386_LINUX_ORIG_EAX_REGNUM): Adjuste regnum
calculation.
(tdesc_i386_avx_mpx_avx512_linux): Rename prototype.
(/* Format of XSAVE...): Add pkru register.
* i386-tdep.c (i386-avx-mpx-avx512.c): Rename include.
(i386_pkeys_names): New register name for raw register PKRU.
(i386_pkru_regnum_p): Add function to look up register number of
PKRU raw register.
(i386_register_reggroup_p): Add code to exclude PKRU from general
register group.
(i386_validate_tdesc_p): Add code to handle PKRU feature, add PKRU
registers if feature is present in xcr0.
(i386_gdbarch_init): Adjust number of registers in architecture. Add code
to initialize PKRU feature variables in tdep structure.
(i386_target_description): Rename xstate mask and returned
tdesc for X86_XSTATE_AVX_MPX_AVX512_PKU_MASK.
(_initialize_i386_tdep): Rename initialize_tdesc_i386_avx_mpx_avx512.
* i386-tdep.h (struct gdbarch_tdep): Add feature variables to tdep
structure.
(enum i386_regnum): Add PKRU register.
(I386_PKEYS_NUM_REGS): New define for number of registers in PKRU feature.
(i386_pkru_regnum_p): New prototype.
* i387-tdep.c (xsave_pkeys_offset): New table for PKRU offsets in
XSAVE buffer.
(XSAVE_PKEYS_ADDR): New macro.
(i387_supply_xsave): Add code to handle PKRU register.
(i387_collect_xsave): Likewise.
* i387-tdep.h (I387_NUM_PKEYS_REGS): New define for number of registers
in PKRU feature.
(I387_PKRU_REGNUM): New macro.
(I387_PKEYSEND_REGNUM): Likewise.
* regformats/i386/amd64_avx_mpx_avx512_pku_linux.dat: Regenerate from
renamed XML file.
* regformats/i386/amd64_avx_mpx_avx512_pku.dat: Likewise.
* regformats/i386/i386/amd64-avx-mpx-avx512-pku.dat: Likewise.
* regformats/i386/i386_avx_mpx_avx512_pku_linux.dat: Likewise.
testsuite/Changelog:
2016-04-18 Michael Sturm <michael.sturm@intel.com>
* gdb.arch/i386-pkru.c: New file.
* gdb.arch/i386-pkru.exp: Likewise.
gdbserver/Changelog:
2016-04-18 Michael Sturm <michael.sturm@intel.com>
* Makefile.in (clean): Rename i386-avx-mpx-avx512.c,
i386-avx-mpx-avx512-linux.c, amd64-avx-mpx-avx512.c,
amd64-avx-mpx-avx512-linux.c.
(i386-avx-mpx-avx512-linux-ipa.o:): Rename rule and source file.
(amd64-avx-mpx-avx512-linux-ipa.o:): Likewise.
(i386-avx-mpx-avx512.c :): Rename rule, source files and dat files.
(i386-avx-mpx-avx512-linux.c :): Likewise.
(amd64-avx-mpx-avx512.c :): Likewise.
(amd64-avx-mpx-avx512-linux.c :): Likewise.
* configure.srv (srv_i386_regobj): Rename i386-avx-mpx-avx512.o.
(srv_i386_linux_regobj): Rename i386-avx-mpx-avx512-linux.o.
(srv_amd64_regobj): Rename amd64-avx-mpx-avx512.o.
(srv_amd64_linux_regobj): Rename amd64-avx-mpx-avx512-linux.o.
(ipa_i386_linux_regobj): Rename i386-avx-mpx-avx512-linux-ipa.o.
(ipa_amd64_linux_regobj): Rename amd64-avx-mpx-avx512-pku-linux-ipa.o.
(srv_i386_32bit_xmlfiles): Add 32bit-pkeys.xml.
(srv_i386_64bit_xmlfiles): Add 64bit-pkeys.xml.
(srv_i386_xmlfiles): Rename i386/i386-avx-mpx-avx512.xml.
(srv_amd64_xmlfiles): Rename i386/amd64-avx-mpx-avx512.xml.
(srv_i386_linux_xmlfiles): Rename i386/i386-avx-mpx-avx512-linux.xml.
(srv_amd64_linux_xmlfiles): Rename di386/amd64-avx-mpx-avx512-linux.xml.
* i387-fp.c (num_pkeys_registers): New variable.
(struct i387_xsave): Add space for pkru values.
(i387_cache_to_fsave): Add code to handle PKRU register.
(i387_xsave_to_cache): Likewise.
* linux-amd64-ipa.c (get_ipa_tdesc): Rename
tdesc_amd64_avx_mpx_avx512_linux.
(initialize_low_tracepoint): Rename
init_registers_amd64_avx_mpx_avx512_linux.
* linux-i386-ipa.c (get_ipa_desc): Rename
tdesc_i386_avx_mpx_avx512_linux.
(initialize_low_tracepoint): Rename
init_registers_i386_avx_mpx_avx512_linux.
* linux-x86-low.c (x86_64_regmap[]): Add PKRU register.
(x86_linux_read_description): Rename X86_XSTATE_AVX_MPX_AVX512_MASK,
rename tdesc_amd64_avx_mpx_avx512_linux, rename
tdesc_i386_avx_mpx_avx512_linux.
(x86_get_ipa_tdesc_idx): Rename tdesc_amd64_avx_mpx_avx512_linux,
rename tdesc_i386_avx_mpx_avx512_linux.
(initialize_low_arch): Rename init_registers_amd64_avx_mpx_avx512_linux,
rename init_registers_i386_avx_mpx_avx512_linux.
* linux-x86-tdesc.h (init_registers_amd64_avx_mpx_avx512_linux): Renamed
prototype.
(tdesc_amd64_avx_mpx_avx512_linux): Likewise.
(init_registers_i386_avx_mpx_avx512_linux): Likewise.
(tdesc_i386_avx_mpx_avx512_linux): Likewise.
doc/Changelog:
2016-04-18 Michael Sturm <michael.sturm@intel.com>
* gdb.texinfo (i386 Features): Add description of PKRU register.
Change-Id: If75ce5aba7dfd33fdbe3d8b47f04ef3f550c52be
Signed-off-by: Michael Sturm <michael.sturm@intel.com>
|
|
Add a dedicated target description for the feature combination
avx-avx512 as implemented by certain IA CPU models.
The corresponding X86_XSTATE_AVX_AVX512_MASK already exists, but shared
the tdesc with X86_XSTATE_AVX_MPX_AVX512_MASK. This caused MPX registers
displayed as undefined on CPUs that only implemented
X86_XSTATE_AVX_AVX512_MASK, which is undesired. This patch solves this issue.
This patch also corrects the wrong usage of x32-avx-mpx-avx512, which is
replaced by x32-avx-avx512. The MPX feature is not implemented in x32 mode.
gdb/Changelog:
2016-04-18 Michael Sturm <michael.sturm@intel.com>
* amd64-linux-tdep.c (features/i386/amd64-avx-avx512-linux.c):
New include.
(features/i386/x32-avx-mpx-avx512-linux.c): Rename to...
(features/i386/x32-avx-avx512-linux.c): ...this.
(amd64_linux_core_read_description): Add dedicated cases for
X86_XSTATE_AVX_AVX512_MASK and return appropriate tdesc.
(_initialize_amd64_linux_tdep): Add calls to
initialize_tdesc_amd64_avx_avx512_linux and
initialize_tdesc_x32_avx_avx512_linux.
* amd64-linux.tdep.h (tdesc_amd64_avx_avx512_linux): New prototype.
(tdesc_x32_avx_mpx_avx512_linux): Rename to...
(tdesc_x32_avx_avx512_linu): ...this.
* amd64-tdep.c (features/i386/amd64-avx-avx512.c): New include.
(features/i386/x32-avx-mpx-avx512.c): Rename to...
(features/i386/x32-avx-avx512.c): ...this.
(amd64_target_description): Add dedicated case for
X86_XSTATE_AVX_AVX512_MASK and return appropriate tdesc.
(_initialize_amd64_tdep): Add call to
initialize_tdesc_amd64_avx_avx512.
(initialize_tdesc_x32_avx_mpx_avx512): Rename to...
(initialize_tdesc_x32_avx_avx512): ...this.
* features/Makefile (WHICH): New tdescs i386/i386-avx-avx512,
i386/i386-avx-avx512-linux, i386/amd64-avx-avx512,
i386/amd64-avx-avx512-linux.
(i386/x32-avx-mpx-avx512): Rename to...
(i386/x32-avx-avx512): ...this.
(i386/x32-avx-mpx-avx512-linux): Rename to...
(i386/x32-avx-avx512-linux): ...this.
(i386/i386-avx-avx512-expedite, i386/i386-avx-avx512-linux-expedite,
i386/amd64-avx-avx512-expedite, i386/amd64-avx-avx512-linux-expedite):
New expedites.
(i386/x32-avx-mpx-avx512-expedite): Rename to...
(i386/x32-avx-avx512-expedite): ...this.
(i386/x32-avx-mpx-avx512-linux-expedite): Rename to...
(i386/x32-avx-avx512-linux-expedite): ...this.
(XMLTOC): New XML files i386/amd64-avx-avx512-linux.xml,
i386/amd64-avx-avx512.xml, i386/i386-avx-avx512-linux.xml,
i386/i386-avx-avx512.xml.
(i386/x32-avx-mpx-avx512-linux.xml): Rename to...
(i386/x32-avx-avx512-linux.xml): ...this.
(i386/x32-avx-mpx-avx512.xml): Rename to...
(i386/x32-avx-avx512.xml): ...this.
($(outdir)/i386/i386-avx-avx512.dat): New rule.
($(outdir)/i386/i386-avx-avx512-linux.dat): Likewise.
($(outdir)/i386/amd64-avx-avx512.dat): Likewise.
($(outdir)/i386/amd64-avx-avx512-linux.dat): Likewise.
($(outdir)/i386/x32-avx-mpx-avx512.dat): Rename to...
($(outdir)/i386/x32-avx-avx512.dat): ...this.
($(outdir)/i386/x32-avx-mpx-avx512-linux.dat): Rename to...
($(outdir)/i386/x32-avx-avx512-linux.dat): ...this.
* features/i386/amd64-avx-avx512-linux.c: New file.
* features/i386/amd64-avx-avx512-linux.xml: Likewise.
* features/i386/amd64-avx-avx512.c: Likewise.
* features/i386/amd64-avx-avx512.xml: Likewise.
* features/i386/i386-avx-avx512-linux.c: Likewise.
* features/i386/i386-avx-avx512-linux.xml: Likewise.
* features/i386/i386-avx-avx512.c: Likewise.
* features/i386/i386-avx-avx512.xml: Likewise.
* features/i386/x32-avx-mpx-avx512-linux.c: Deleted.
* features/i386/x32-avx-avx512-linux.c: New file.
* features/i386/x32-avx-mpx-avx512-linux.xml: Deleted.
* features/i386/x32-avx-avx512-linux.xml: New file.
* features/i386/x32-avx-mpx-avx512.c: Deleted.
* features/i386/x32-avx-avx512.c: New file.
* features/i386/x32-avx-mpx-avx512.xml: Deleted.
* features/i386/x32-avx-avx512.xml: New file.
* i386-linux-tdep.c (features/i386/i386-avx-avx512-linux.c): New include.
(i386_linux_core_read_description): Add dedicated case for
X86_XSTATE_AVX_AVX512_MASK and return appropriate tdesc.
(_initialize_i386_linux_tdep): Add call to
initialize_tdesc_i386_avx_avx512_linux.
* i386-linux-tdep.h (tdesc_i386_avx_avx512_linux): New prototype.
* i386-tdep.c (features/i386/i386-avx-avx512.c): New include.
(i386_validate_tdesc_p): Correct XSTATE mask used for feature_avx512.
(i386_target_description): Add dedicated case for
X86_XSTATE_AVX_AVX512_MASK and return appropriate tdesc.
(_initialize_i386_tdep): Add call to initialize_tdesc_i386_avx_avx512.
* regformats/i386/amd64-avx-avx512-linux.dat: New file
* regformats/i386/amd64-avx-avx512.dat: Likewise.
* regformats/i386/i386-avx-avx512-linux.dat: Likewise.
* regformats/i386/i386-avx-avx512.dat: Likewise.
* regformats/i386/x32-avx-mpx-avx512-linux.dat: Deleted.
* regformats/i386/x32-avx-avx512-linux.dat: New file.
* regformats/i386/x32-avx-mpx-avx512.dat: Deleted.
* regformats/i386/x32-avx-avx512.dat: New file.
* x86-linux-nat.c (x86_linux_read_description): Add dedidated case for
X86_XSTATE_AVX_AVX512_MASK and return appropriate description.
gdbserver/Changelog:
2016-04-18 Michael Sturm <michael.sturm@intel.com>
* Makefile.in (clean): Add handling of new source files
i386-avx-avx512.c, i386-avx-avx512-linux.c, amd64-avx-avx512.c,
amd64-avx-avx512-linux.c.
(x32-avx-mpx-avx512.c): Rename to...
(x32-avx-avx512.c): ...this.
(x32-avx-mpx-avx512-linux.c): Rename to...
(x32-avx-avx512-linux.c): ...this.
(i386-avx-avx512-linux-ipa.o): New rule.
(amd64-avx-avx512-linux-ipa.o): Likewise.
(i386-avx-avx512.c): Likewise.
(i386-avx-avx512-linux.c): Likewise.
(amd64-avx-avx512.c): Likewise.
(amd64-avx-avx512-linux.c): Likewise.
(x32-avx-avx512.c): Rename rule, source files, dat files from
x32-avx-mpx-avx512.*) to this.
(x32-avx-avx512-linux.c): Rename rule, source files, dat files from
x32-avx-mpx-avx512-linux.*) to this.
* configure.srv (srv_i386_regobj): Add i386-avx-avx512.o.
(srv_i386_linux_regobj): Add i386-avx-avx512-linux.o.
(srv_amd64_regobj): Add amd64-avx-avx512.o, rename
x32-avx-mpx-avx512.o to x32-avx-avx512.o.
(srv_amd64_linux_regobj): Add amd64-avx-avx512-linux.o, rename
x32-avx-mpx-avx512-linux.o to x32-avx-avx512-linux.o.
(ipa_i386_linux_regobj): Add i386-avx-avx512-linux-ipa.o.
(ipa_amd64_linux_regobj): Add amd64-avx-avx512-linux-ipa.o.
(srv_i386_xmlfiles): Add i386/i386-avx-avx512.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx-avx512.xml, rename
x32-avx-mpx-avx512.xml to x32-avx-avx512.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx-avx512-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx-avx512-linux.xml,
rename x32-avx-mpx-avx512-linux.xml to x32-avx-avx512-linux.xml.
* linux-amd64-ipa.c (get_ipa_tdesc): Add dedicated case for
X86_TDESC_AVX_AVX512 and return appropriate tdesc.
(initialize_low_tracepoint): Add init_registers_amd64_avx_avx512_linux.
* linux-i386-ipa.c (get_ipa_tdesc): Add dedicated case for
X86_TDESC_AVX_AVX512 and return appropriate tdesc.
(initialize_low_tracepoint): Add init_registers_i386_avx_avx512_linux.
* linux-x86-low.c (x86_linux_read_description): Add dedicated cases for
X86_XSTATE_AVX_AVX512_MASK and return appropriate tdesc.
(x86_get_ipa_tdesc_idx): Rename tdesc_x32_avx_mpx_avx512_linux to
tdesc_x32_avx_avx512_linux, add dedicated if-clause for
tdesc_amd64_avx_avx512_linux and return appropriate mask.
Add dedicated clause for tdesc_i386_avx_avx512_linux
and return appropriate mask.
(initialize_low_arch): Add init_registers_amd64_avx_avx512_linux,
rename init_registers_x32_avx_mpx_avx512_linux, add
init_registers_i386_avx_avx512_linux.
* linux-x86-tdesc.h (enum x86_linux_tdesc): Add new value for
X86_TDESC_AVX_AVX512.
(init_registers_amd64_avx_avx512_linux): New prototype.
(tdesc_amd64_avx_avx512_linux): Likewise.
(init_registers_x32_avx_mpx_avx512_linux): Rename to...
(init_registers_x32_avx_avx512_linux): ...this.
(tdesc_x32_avx_mpx_avx512_linux): Rename to...
(tdesc_x32_avx_avx512_linux): ...this.
(init_registers_i386_avx_avx512_linux): New prototype.
(tdesc_i386_avx_avx512_linux): Likewise.
Change-Id: I01359fab56c961a39568df50af39714ec7b31706
Signed-off-by: Michael Sturm <michael.sturm@intel.com>
|
|
To better reflect the actual feature set covered by the IA target
descriptions, the existing descriptions are renamed. Each feature of
the extended state is added to the name of a description or xstate mask
starting from AVX.
For example, amd64-mpx-avx512-linux becomes amd64-avx-mpx-avx512-linux,
while amd64-avx-linux remains unchanged.
Likewise, the corresponding xstate masks are changed, e.g. from
X86_XSTATE_MPX_AVX512_MASK to X86_XSTATE_AVX_MPX_AVX512_MASK.
gdb/Changelog:
2016-04-18 Michael Sturm <michael.sturm@intel.com>
* amd64-linux-tdep.c (features/i386/amd64-avx512-linux.c): Rename
include to...
(features/i386/amd64-avx-mpx-avx512-linux.c): ...this.
(features/i386/x32-avx512-linux.c): Rename include to...
(features/i386/x32-avx-mpx-avx512-linux.c): ...this.
(amd64_linux_core_read_description): Rename X86_XSTATE_MPX_AVX512_MASK,
X86_XSTATE_AVX512_MASK, desc_x32_avx512_linux, tdesc_amd64_avx512_linux.
(_initialize_amd64_linux_tdep): Rename
initialize_tdesc_amd64_avx512_linux, initialize_tdesc_x32_avx512_linux.
* amd64-linux-tdep.h (tdesc_amd64_avx512_linux): Rename to...
(tdesc_amd64_avx_mpx_avx512_linux): ...this.
(tdesc_x32_avx512_linux): Rename to...
(tdesc_x32_avx_mpx_avx512_linux): ...this.
* amd64-tdep.c (features/i386/amd64-avx512.c): Rename include to...
(features/i386/amd64-avx-mpx-avx512.c): ...this.
(features/i386/x32-avx512.c): Rename include to...
(features/i386/x32-avx-mpx-avx512.c): ...this.
(amd64_target_description): Rename X86_XSTATE_MPX_AVX512_MASK,
X86_XSTATE_AVX512_MASK, tdesc_amd64_avx512.
(_initialize_amd64_tdep): Rename initialize_tdesc_amd64_avx512. Rename
initialize_tdesc_x32_avx512.
* common/x86-xstate.h (X86_XSTATE_AVX512_MASK): Rename to...
(X86_XSTATE_AVX_AVX512_MASK): ...this.
(86_XSTATE_MPX_AVX512_MASK): Rename to...
(X86_XSTATE_AVX_MPX_AVX512_MASK): ...this.
(X86_XSTATE_ALL_MASK): Rename X86_XSTATE_MPX_AVX512_MASK to
X86_XSTATE_AVX_MPX_AVX512_MASK.
* features/Makefile (WHICH): Rename i386/i386-avx512,
i386/i386-avx512-linux, i386/amd64-avx512, i386/amd64-avx512-linux,
i386/x32-avx512, i386/x32-avx512-linux.
(i386/i386-avx512-expedite, i386/i386-avx512-linux-expedite,
i386/amd64-avx512-expedite, i386/amd64-avx512-linux-expedite,
i386/x32-avx512-expedite, i386/x32-avx512-linux-expedite): Rename
expedites.
(XMLTOC): Rename i386/amd64-avx512-linux.xml, i386/amd64-avx512.xml,
i386/i386-avx512-linux.xml, i386/i386-avx512.xml,
i386/x32-avx512-linux.xml, i386/x32-avx512.xml.
($(outdir)/i386/i386-avx512.dat): Rename dat file in rule.
($(outdir)/i386/i386-avx512-linux.dat): Likewise.
($(outdir)/i386/amd64-avx512.dat): Likewise.
($(outdir)/i386/amd64-avx512-linux.dat): Likewise.
($(outdir)/i386/x32-avx512.dat): Likewise.
($(outdir)/i386/x32-avx512-linux.dat): Likewise.
* features/i386/amd64-avx512-linux.c: Regenerate from renamed XML file.
* features/i386/amd64-avx512-linux.xml: Rename XML file.
* features/i386/amd64-avx512.c: Regenerate from renamed XML file.
* features/i386/amd64-avx512.xml: Rename XML file.
* features/i386/i386-avx512-linux.c: Regenerate from renamed XML file.
* features/i386/i386-avx512-linux.xml: Rename XML file.
* features/i386/i386-avx512.c: Regenerate from renamed XML file.
* features/i386/i386-avx512.xml: Rename XML file.
* features/i386/x32-avx512-linux.c: Regenerate from renamed XML file.
* features/i386/x32-avx512-linux.xml: Rename XML file.
* features/i386/x32-avx512.c: Regenerate from renamed XML file.
* features/i386/x32-avx512.xml: Rename XML file.
* i386-linux-tdep.c (features/i386/i386-avx512-linux.c): Rename to...
(features/i386/i386-avx-mpx-avx512-linux.c): ...this.
(i386_linux_core_read_description): Rename X86_XSTATE_MPX_AVX512_MASK,
X86_XSTATE_AVX512_MASK, tdesc_i386_avx512_linux.
(_initialize_i386_linux_tdep): Rename initialize_tdesc_i386_avx512_linux.
* i386-linux-tdep.h (tdesc_i386_avx512_linux): Rename to...
(tdesc_i386_avx_mpx_avx512_linux): ...this.
* i386-tdep.c (features/i386/i386-avx512.c): Rename to...
(features/i386/i386-avx-mpx-avx512.c): ...this.
(i386_register_reggroup_p): Rename X86_XSTATE_AVX512_MASK.
(i386_validate_tdesc_p): Likewise.
(i386_target_description): Rename X86_XSTATE_MPX_AVX512_MASK,
tdesc_i386_avx512.
(_initialize_i386_tdep): Rename initialize_tdesc_i386_avx512.
* regformats/i386/amd64-avx512-linux.dat: Regenerate from renamed XML
file.
* regformats/i386/amd64-avx512.dat: Likewise.
* regformats/i386/i386-avx512-linux.dat: Likewise.
* regformats/i386/i386-avx512.dat: Likewise.
* regformats/i386/x32-avx512-linux.dat: Likewise.
* regformats/i386/x32-avx512.dat: Likewise.
* x86-Linux-nat.c (x86_linux_read_description): Rename
X86_XSTATE_MPX_AVX512_MASK, X86_XSTATE_AVX512_MASK,
tdesc_x32_avx512_linux, tdesc_amd64_avx512_linux, tdesc_i386_avx512_linux.
gdbserver/Changelog:
2016-04-18 Michael Sturm <michael.sturm@intel.com>
* Makefile.in (clean): Rename i386-avx512.c, i386-avx512-linux.c,
amd64-avx512.c, amd64-avx512-linux.c, x32-avx512.c, x32-avx512-linux.c.
(i386-avx512-linux-ipa.o): Rename rule and source files.
(amd64-avx512-linux-ipa.o): Likewise.
(i386-avx512.c): Rename rule, source fils and dat files.
(i386-avx512-linux.c): Likewise.
(amd64-avx512.c): Likewise.
(amd64-avx512-linux.c): Likewise.
(x32-avx512.c): Likewise.
(x32-avx512-linux.c): Likewise.
* configfure.srv (srv_i386_regobj): Rename i386-avx512.o.
(i386_linux_regobj): Rename i386-avx512-linux.o.
(srv_amd64_regobj): Rename amd64-avx512.o, x32-avx512.o.
(srv_amd64_linux_regobj): Rename amd64-avx512-linux.o,
x32-avx512-linux.o.
(ipa_i386_linux_regobj): Rename i386-avx512-linux-ipa.o.
(ipa_amd64_linux_regobj): Rename amd64-avx512-linux-ipa.o.
(srv_i386_xmlfiles): Rename i386/i386-avx512.xml.
(srv_amd64_xmlfiles): Rename i386/amd64-avx512.xml, i386/x32-avx512.xml.
(srv_i386_linux_xmlfiles): Rename i386/i386-avx512-linux.xml.
(srv_amd64_linux_xmlfiles): Rename i386/amd64-avx512-linux.xml,
i386/x32-avx512-linux.xml).
* linux-amd64-ipa.c (get_ipa_tdesc): Rename X86_TDESC_AVX512 and returned
tdesc for that case.
(initialize_low_tracepoint): Rename init_registers_amd64_avx512_linux.
* linux-i386-ipa.c (get_ipa_tdesc): Rename X86_TDESC_AVX512 and tdesc
returned for that case.
(initialize_low_tracepoint): Rename init_registers_i386_avx512_linux.
* linux-x86-low.c (x86_linux_read_description): Rename
X86_XSTATE_AVX512_MASK and tdesc returned for that case.
(x86_get_ipa_tdesc_idx): Rename tdesc_amd64_avx512_linux,
tdesc_x32_avx512_linux and mask returned for these descriptions.
Rename tdesc_i386_avx512_linux and mask returned for that description.
(initialize_low_arch): Rename init_registers_amd64_avx512_linux,
init_registers_x32_avx512_linux, init_registers_i386_avx512_linux.
* linux-x86-tdesc.h (enum x86_linux_tdesc): Rename X86_TDESC_AVX512.
(init_registers_amd64_avx512_linux): Rename to...
(init_registers_amd64_avx_mpx_avx512_linux): ...this.
(tdesc_amd64_avx512_linux): Rename to...
(tdesc_amd64_avx_mpx_avx512_linux): ...this.
(init_registers_x32_avx512_linux): Rename to...
(init_registers_x32_avx_mpx_avx512_linux): ...this.
(tdesc_x32_avx512_linux): Rename to...
(tdesc_x32_avx_mpx_avx512_linux): ...this.
(init_registers_i386_avx512_linux): Rename to...
(init_registers_i386_avx_mpx_avx512_linux): ...this.
(tdesc_i386_avx512_linux): Rename to...
(tdesc_i386_avx_mpx_avx512_linux): ...this.
Change-Id: Idb83be3b3b72d5487542d4b568193df2777a3d9d
Signed-off-by: Michael Sturm <michael.sturm@intel.com>
|
|
This patch addresses BZ 21005, which is gdb failing to recognize an rdrand
instruction.
It enables support for both rdrand and rdseed and handles extended register
addressing (R8~R15) for 16-bit, 32-bit and 64-bit.
gdb/ChangeLog
2017-02-06 Luis Machado <lgustavo@codesourcery.com>
* NEWS: Mention support for record/replay of Intel 64 rdrand and
rdseed instructions.
i386-tdep.c (i386_process_record): Handle Intel 64 rdrand and rseed.
gdb/testsuite/ChangeLog:
2017-02-06 Luis Machado <lgustavo@codesourcery.com>
* gdb.reverse/insn-reverse.c: Include insn-reverse-x86.c.
* gdb.reverse/insn-reverse-x86.c: New file.
|
|
gdb/ChangeLog:
2017-02-01 Pedro Alves <palves@redhat.com>
* i386-tdep.c (i386_fast_tracepoint_valid_at): Use gdb_insn_length.
|
|
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This patch finalizes the C++ conversion of the ui-out subsystem, by
turning the ui_out and ui_out_impl structures into a single class
hierarchy. ui_out functions are turned into virtual methods of that new
class, so as a result there are a lot of call sites to update.
In the previous version of the patchset, there were separate ui_out and
ui_out_impl classes, but it wasn't really useful and added boilerplate.
In this version there is simply an ui_out base class that is
extended for CLI, TUI and MI.
It's a bit hard to maintain a ChangeLog for such a big patch, I did my
best but I'm sure there are some missing or outdated info in there...
gdb/ChangeLog:
* ui-out.h (ui_out_begin, ui_out_end, ui_out_table_header,
ui_out_table_body, ui_out_field_int, ui_out_field_fmt_int,
ui_out_field_core_addr, ui_out_field_string, ui_out_field_stream,
ui_out_field_fmt, ui_out_field_skip, ui_out_spaces, ui_out_text,
ui_out_message, ui_out_wrap_hint, ui_out_flush, ui_out_test_flags,
ui_out_query_field, ui_out_is_mi_like_p, ui_out_redirect):
Remove, replace with a method in class ui_out.
(table_begin_ftype): Remove, replace with pure virtual method in
class ui_out.
(table_body_ftype): Likewise.
(table_end_ftype): Likewise.
(table_header_ftype): Likewise.
(ui_out_begin_ftype): Likewise.
(ui_out_end_ftype): Likewise.
(field_int_ftype): Likewise.
(field_skip_ftype): Likewise.
(field_string_ftype): Likewise.
(field_fmt_ftype): Likewise.
(spaces_ftype): Likewise.
(text_ftype): Likewise.
(message_ftype): Likewise.
(wrap_hint_ftype): Likewise.
(flush_ftype): Likewise.
(redirect_ftype): Likewise.
(data_destroy_ftype): Likewise.
(struct ui_out_impl): Remove, replace with class ui_out.
(ui_out_new): Remove.
(class ui_out): New class.
* ui-out.c (struct ui_out): Remove, replaced with class ui_out.
(current_level): Remove, replace with ui_out method.
(push_level): Likewise.
(pop_level): Likewise.
(uo_table_begin, uo_table_body, uo_table_end, uo_table_header,
uo_begin, uo_end, uo_field_int, uo_field_skip, uo_field_fmt,
uo_spaces, uo_text, uo_message, uo_wrap_hint, uo_flush,
uo_redirect, uo_field_string): Remove.
(ui_out_table_begin): Replace with ...
(ui_out::table_begin): ... this.
(ui_out_table_body): Replace with ...
(ui_out::table_body): ... this.
(ui_out_table_end): Replace with ...
(ui_out::table_end): ... this.
(ui_out_table_header): Replace with ...
(ui_out::table_header): ... this.
(ui_out_begin): Replace with ...
(ui_out::begin): ... this.
(ui_out_end): Replace with ...
(ui_out::end): ... this.
(ui_out_field_int): Replace with ...
(ui_out::field_int): ... this.
(ui_out_field_fmt_int): Replace with ...
(ui_out::field_fmt_int): ... this.
(ui_out_field_core_addr): Replace with ...
(ui_out::field_core_addr): ... this.
(ui_out_field_stream): Replace with ...
(ui_out::field_stream): ... this.
(ui_out_field_skip): Replace with ...
(ui_out::field_skip): ... this.
(ui_out_field_string): Replace with ...
(ui_out::field_string): ... this.
(ui_out_field_fmt): Replace with ...
(ui_out::field_fmt): ... this.
(ui_out_spaces): Replace with ...
(ui_out::spaces): ... this.
(ui_out_text): Replace with ...
(ui_out::text): ... this.
(ui_out_message): Replace with ...
(ui_out::message): ... this.
(ui_out_wrap_hint): Replace with ...
(ui_out::wrap_hint): ... this.
(ui_out_flush): Replace with ...
(ui_out::flush): ... this.
(ui_out_redirect): Replace with ...
(ui_out::redirect): ... this.
(ui_out_test_flags): Replace with ...
(ui_out::test_flags): ... this.
(ui_out_is_mi_like_p): Replace with ...
(ui_out::is_mi_like_p): ... this.
(verify_field): Replace with ...
(ui_out::verify_field): ... this.
(ui_out_query_field): Replace with ...
(ui_out::query_table_field): ... this.
(ui_out_data): Remove.
(ui_out_new): Remove, replace with ...
(ui_out::ui_out): ... this constructor.
(do_cleanup_table_end, make_cleanup_ui_out_tuple_begin_end,
do_cleanup_end, make_cleanup_ui_out_tuple_begin_end,
make_cleanup_ui_out_list_begin_end): Update fallouts of struct
ui_out -> class ui_out change.
* cli-out.c (cli_out_data): Remove.
(cli_uiout_dtor): Remove.
(cli_table_begin): Replace with ...
(cli_ui_out::do_table_begin): ... this new method.
(cli_table_body): Replace with ...
(cli_ui_out::do_table_body): ... this new method.
(cli_table_end): Replace with ...
(cli_ui_out::do_table_end): ... this new method.
(cli_table_header): Replace with ...
(cli_ui_out::do_table_header): ... this new method.
(cli_begin): Replace with ...
(cli_ui_out::do_begin): ... this new method.
(cli_end): Replace with ...
(cli_ui_out::do_end): ... this new method.
(cli_field_int): Replace with ...
(cli_ui_out::do_field_int): ... this new method.
(cli_field_skip): Replace with ...
(cli_ui_out::do_field_skip): ... this new method.
(cli_field_string): Replace with ...
(cli_ui_out::do_field_string): ... this new method.
(cli_field_fmt): Replace with ...
(cli_ui_out::do_field_fmt): ... this new method.
(cli_spaces): Replace with ...
(cli_ui_out::do_spaces): ... this new method.
(cli_text): Replace with ...
(cli_ui_out::do_text): ... this new method.
(cli_message): Replace with ...
(cli_ui_out::do_message): ... this new method.
(cli_wrap_hint): Replace with ...
(cli_ui_out::do_wrap_hint): ... this new method.
(cli_flush): Replace with ...
(cli_ui_out::do_flush): ... this new method.
(cli_redirect): Replace with ...
(cli_ui_out::do_redirect): ... this new method.
(out_field_fmt): Replace with ...
(cli_ui_out::out_field_fmt): ... this new method.
(field_separator): Replace with ...
(cli_ui_out::field_separator): ... this new method.
(cli_out_set_stream): Replace with ...
(cli_ui_out::set_stream): ... this new method.
(cli_ui_out_impl): Remove.
(cli_out_data_ctor): Remove.
(cli_ui_out_impl::cli_ui_out_impl): New constructor.
(cli_ui_out_impl::~cli_ui_out_impl): New destructor.
(cli_out_new): Change return type to cli_ui_out *, instantiate a
cli_ui_out.
* cli-out.h (cli_ui_out_data): Remove, replace with class
cli_ui_out.
(class cli_ui_out): New class.
(cli_ui_out_impl): Remove.
(cli_out_data_ctor): Remove.
(cli_out_new): Change return type to cli_ui_out*.
(cli_out_set_stream): Remove.
* cli/cli-interp.c (struct cli_interp) <cli_uiout>: Change type
to cli_ui_out*.
(cli_interpreter_resume): Adapt.
(cli_interpreter_exec): Adapt.
* mi/mi-out.c (mi_ui_out_data, mi_out_data): Remove.
(mi_ui_out_impl): Remove.
(mi_table_begin): Replace with ...
(mi_ui_out::do_table_begin): ... this.
(mi_table_body): Replace with ...
(mi_ui_out::do_table_body): ... this.
(mi_table_end): Replace with ...
(mi_ui_out::do_table_end): ... this.
(mi_table_header): Replace with ...
(mi_ui_out::do_table_header): ... this.
(mi_begin): Replace with ...
(mi_ui_out::do_begin): ... this.
(mi_end): Replace with ...
(mi_ui_out::do_end): ... this.
(mi_field_int): Replace with ...
(mi_ui_out::do_field_int): ... this.
(mi_field_skip): Replace with ...
(mi_ui_out::do_field_skip): ... this.
(mi_field_string): Replace with ...
(mi_ui_out::do_field_string): ... this.
(mi_field_fmt): Replace with ...
(mi_ui_out::do_field_fmt): ... this.
(mi_spaces): Replace with ...
(mi_ui_out::do_spaces): ... this.
(mi_text): Replace with ...
(mi_ui_out::do_text): ... this.
(mi_message): Replace with ...
(mi_ui_out::do_message): ... this.
(mi_wrap_hint): Replace with ...
(mi_ui_out::do_wrap_hint): ... this.
(mi_flush): Replace with ...
(mi_ui_out::do_flush): ... this.
(mi_redirect): Replace with ...
(mi_ui_out::do_redirect):
(field_separator): Replace with ...
(mi_ui_out::field_separator):
(mi_open): Replace with ...
(mi_ui_out::open): ... this.
(mi_close): Replace with ...
(mi_ui_out::close): ... this.
(mi_out_rewind): Replace with ...
(mi_ui_out::rewind): ... this.
(mi_out_put): Replace with ...
(mi_ui_out::put): ... this.
(mi_version): Replace with ...
(mi_ui_out::version): ... this.
(mi_out_data_ctor): Replace with ...
(mi_ui_out::mi_ui_out): ... this.
(mi_out_data_dtor): Replace with ...
(mi_ui_out::~mi_ui_out): ... this.
(mi_out_new): Change return type to mi_ui_out*, instantiate
an mi_ui_out object.
(as_mi_ui_out): New function.
(mi_version): Update fallouts of struct ui_out to class ui_out
transition.
(mi_out_put): Likewise.
(mi_out_rewind): Likewise.
* mi/mi-out.h (mi_out_new): Change return type to mi_ui_out*.
* tui/tui-out.c (tui_ui_out_data, tui_out_data, tui_ui_out_impl):
Remove.
(tui_field_int): Replace with ...
(tui_ui_out::do_field_int): ... this.
(tui_field_string): Replace with ...
(tui_ui_out::do_field_string): ... this.
(tui_field_fmt): Replace with ...
(tui_ui_out::do_field_fmt): ... this.
(tui_text): Replace with ...
(tui_ui_out::do_text): ... this.
(tui_out_new): Change return type to tui_ui_out*, instantiate
tui_ui_out object.
(tui_ui_out::tui_ui_out): New.
* tui/tui-out.h: New file.
* tui/tui.h (tui_out_new): Move declaration to tui/tui-out.h.
* tui/tui-io.c: Include tui/tui-out.h.
(tui_old_uiout): Change type to cli_ui_out*.
(tui_setup_io): Use dynamic_cast.
* tui/tui-io.h (tui_old_uiout): Change type to cli_ui_out*.
* tui/tui-interp.c (tui_resume): Adapt.
* ada-lang.c (print_it_exception): Update fallouts of struct
ui_out to class ui_out transition.
(print_one_exception): Likewise.
(print_mention_exception): Likewise.
* ada-tasks.c (print_ada_task_info): Likewise.
(info_task): Likewise.
(task_command): Likewise.
* auto-load.c (print_script): Likewise.
(auto_load_info_scripts): Likewise.
(info_auto_load_cmd): Likewise.
* break-catch-sig.c (signal_catchpoint_print_one): Likewise.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
(print_one_catch_syscall): Likewise.
* break-catch-throw.c (print_it_exception_catchpoint): Likewise.
(print_one_exception_catchpoint): Likewise.
(print_one_detail_exception_catchpoint): Likewise.
(print_mention_exception_catchpoint): Likewise.
* breakpoint.c (maybe_print_thread_hit_breakpoint): Likewise.
(print_solib_event): Likewise.
(watchpoint_check): Likewise.
(wrap_indent_at_field): Likewise.
(print_breakpoint_location): Likewise.
(output_thread_groups): Likewise.
(print_one_breakpoint_location): Likewise.
(breakpoint_1): Likewise.
(default_collect_info): Likewise.
(watchpoints_info): Likewise.
(print_it_catch_fork): Likewise.
(print_one_catch_fork): Likewise.
(print_it_catch_vfork): Likewise.
(print_one_catch_vfork): Likewise.
(print_it_catch_solib): Likewise.
(print_one_catch_solib): Likewise.
(print_it_catch_exec): Likewise.
(print_one_catch_exec): Likewise.
(mention): Likewise.
(print_it_ranged_breakpoint): Likewise.
(print_one_ranged_breakpoint): Likewise.
(print_one_detail_ranged_breakpoint): Likewise.
(print_mention_ranged_breakpoint): Likewise.
(print_it_watchpoint): Likewise.
(print_mention_watchpoint): Likewise.
(print_it_masked_watchpoint): Likewise.
(print_one_detail_masked_watchpoint): Likewise.
(print_mention_masked_watchpoint): Likewise.
(bkpt_print_it): Likewise.
(tracepoint_print_one_detail): Likewise.
(tracepoint_print_mention): Likewise.
(update_static_tracepoint): Likewise.
(tracepoints_info): Likewise.
(save_breakpoints): Likewise.
* cli/cli-cmds.c (complete_command): Likewise.
* cli/cli-logging.c (set_logging_redirect): Likewise.
(pop_output_files): Likewise.
(handle_redirections): Likewise.
* cli/cli-script.c (print_command_lines): Likewise.
* cli/cli-setshow.c (do_show_command): Likewise.
(cmd_show_list): Likewise.
* cp-abi.c (list_cp_abis): Likewise.
(show_cp_abi_cmd): Likewise.
* darwin-nat-info.c (darwin_debug_regions_recurse): Likewise.
* disasm.c (gdb_pretty_print_insn): Likewise.
(do_mixed_source_and_assembly_deprecated): Likewise.
(do_mixed_source_and_assembly): Likewise.
* gdb_bfd.c (print_one_bfd): Likewise.
(maintenance_info_bfds): Likewise.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise.
* guile/scm-ports.c (ioscm_with_output_to_port_worker): Likewise.
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault): Likewise.
* i386-tdep.c (i386_mpx_print_bounds): Likewise.
* infcmd.c (run_command_1): Likewise.
(print_return_value_1): Likewise.
* inferior.c (print_selected_inferior): Likewise.
(print_inferior): Likewise.
* infrun.c (print_end_stepping_range_reason): Likewise.
(print_signal_exited_reason): Likewise.
(print_exited_reason): Likewise.
(print_signal_received_reason): Likewise.
(print_no_history_reason): Likewise.
* interps.c (interp_set): Likewise.
* linespec.c (decode_line_full): Likewise.
* linux-thread-db.c (info_auto_load_libthread_db): Likewise.
* mi/mi-cmd-env.c (mi_cmd_env_pwd): Likewise.
(mi_cmd_env_path): Likewise.
(mi_cmd_env_dir): Likewise.
(mi_cmd_inferior_tty_show): Likewise.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Likewise.
(print_partial_file_name): Likewise.
(mi_cmd_file_list_exec_source_files): Likewise.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions): Likewise.
(mi_cmd_info_gdb_mi_command): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_info_depth): Likewise.
(mi_cmd_stack_list_args): Likewise.
(list_arg_or_local): Likewise.
* mi/mi-cmd-var.c (print_varobj): Likewise.
(mi_cmd_var_create): Likewise.
(mi_cmd_var_delete): Likewise.
(mi_cmd_var_set_format): Likewise.
(mi_cmd_var_show_format): Likewise.
(mi_cmd_var_info_num_children): Likewise.
(mi_cmd_var_list_children): Likewise.
(mi_cmd_var_info_type): Likewise.
(mi_cmd_var_info_path_expression): Likewise.
(mi_cmd_var_info_expression): Likewise.
(mi_cmd_var_show_attributes): Likewise.
(mi_cmd_var_evaluate_expression): Likewise.
(mi_cmd_var_assign): Likewise.
(varobj_update_one): Likewise.
* mi/mi-interp.c (as_mi_interp): Likewise.
(mi_on_normal_stop_1): Likewise.
(mi_tsv_modified): Likewise.
(mi_breakpoint_created): Likewise.
(mi_breakpoint_modified): Likewise.
(mi_solib_loaded): Likewise.
(mi_solib_unloaded): Likewise.
(mi_command_param_changed): Likewise.
(mi_memory_changed): Likewise.
(mi_user_selected_context_changed): Likewise.
* mi/mi-main.c (print_one_inferior): Likewise.
(output_cores): Likewise.
(list_available_thread_groups): Likewise.
(mi_cmd_data_list_register_names): Likewise.
(mi_cmd_data_list_changed_registers): Likewise.
(output_register): Likewise.
(mi_cmd_data_evaluate_expression): Likewise.
(mi_cmd_data_read_memory): Likewise.
(mi_cmd_data_read_memory_bytes): Likewise.
(mi_cmd_list_features): Likewise.
(mi_cmd_list_target_features): Likewise.
(mi_cmd_add_inferior): Likewise.
(mi_execute_command): Likewise.
(mi_load_progress): Likewise.
(print_variable_or_computed): Likewise.
(mi_cmd_trace_frame_collected): Likewise.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Likewise.
* osdata.c (info_osdata_command): Likewise.
* probe.c (gen_ui_out_table_header_info): Likewise.
(print_ui_out_not_applicables): Likewise.
(print_ui_out_info): Likewise.
(info_probes_for_ops): Likewise.
(enable_probes_command): Likewise.
(disable_probes_command): Likewise.
* progspace.c (print_program_space): Likewise.
* python/py-breakpoint.c (bppy_get_commands): Likewise.
* python/py-framefilter.c (py_print_type): Likewise.
(py_print_value): Likewise.
(py_print_single_arg): Likewise.
(enumerate_args): Likewise.
(enumerate_locals): Likewise.
(py_print_args): Likewise.
(py_print_frame): Likewise.
* record-btrace.c (btrace_ui_out_decode_error): Likewise.
(btrace_call_history_insn_range): Likewise.
(btrace_call_history_src_line): Likewise.
(btrace_call_history): Likewise.
* remote.c (show_remote_cmd): Likewise.
* skip.c (skip_info): Likewise.
* solib.c (info_sharedlibrary_command): Likewise.
* source.c (print_source_lines_base): Likewise.
* spu-tdep.c (info_spu_event_command): Likewise.
(info_spu_signal_command): Likewise.
(info_spu_mailbox_list): Likewise.
(info_spu_dma_cmdlist): Likewise.
(info_spu_dma_command): Likewise.
(info_spu_proxydma_command): Likewise.
* stack.c (print_stack_frame): Likewise.
(print_frame_arg): Likewise.
(read_frame_arg): Likewise.
(print_frame_args): Likewise.
(print_frame_info): Likewise.
(print_frame): Likewise.
* symfile.c (load_progress): Likewise.
(generic_load): Likewise.
(print_transfer_performance): Likewise.
* thread.c (do_captured_list_thread_ids): Likewise.
(print_thread_info_1): Likewise.
(restore_selected_frame): Likewise.
(do_captured_thread_select): Likewise.
(print_selected_thread_frame): Likewise.
* top.c (execute_command_to_string): Likewise.
* tracepoint.c (tvariables_info_1): Likewise.
(trace_status_mi): Likewise.
(tfind_1): Likewise.
(print_one_static_tracepoint_marker): Likewise.
(info_static_tracepoint_markers_command): Likewise.
* utils.c (do_ui_out_redirect_pop): Likewise.
(fputs_maybe_filtered): Likewise.
|
|
gdb/ChangeLog:
* i386-tdep.c (i386_gdbarch_init): Add comments.
|
|
Both of them are used in conversion. We can remove them since the
conversion is done.
There are many architectures only have one breakpoint instruction,
so their gdbarch methods breakpoint_kind_from_pc and
sw_breakpoint_from_kind look very similar. Instead of macro, we
use template "template <size_t, const gdb_byte *> struct bp_manipulation"
for these architectures. In order to use template, I also change
breakpoint instruction of type "static const gdb_byte[]" to
"constexpr gdb_byte[]", and rename them to ARCH_break_insn.
gdb:
2016-11-03 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change it to
constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(aarch64_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* alpha-tdep.c (break_insn): Rename to alpha_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(alpha_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* arc-tdep.c (arc_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Remove.
(struct bp_manipulation): New.
(SET_GDBARCH_BREAKPOINT_MANIPULATION): Remove.
(struct bp_manipulation_endian): New.
(BP_MANIPULATION): New.
(BP_MANIPULATION_ENDIAN): New.
* arm-tdep.c (arm_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* avr-tdep.c (avr_break_insn): Change it constexpr.
(avr_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* bfin-tdep.c (bfin_gdbarch_init): Likewise.
* cris-tdep.c (cris_gdbarch_init): Likewise.
* frv-tdep.c (breakpoint): Rename it to frv_break_insn, and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(frv_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* ft32-tdep.c (breakpoint): Rename it to ft32_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(ft32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* h8300-tdep.c (breakpoint): Rename it to h8300_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(h8300_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* hppa-tdep.c (breakpoint): Rename it to h8300_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(hppa_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* i386-tdep.c (break_insn): Rename it to i386_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(i386_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* iq2000-tdep.c (iq2000_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* lm32-tdep.c (breakpoint): Rename it to lm32_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(lm32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m32c-tdep.c (break_insn): Rename it to m32c_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m32c_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* m68hc11-tdep.c (breakpoint): Rename it to m68hc11_break_insn and
change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m68hc11_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m68k-tdep.c (break_insn): Rename it to m68k_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m68k_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m88k-tdep.c (break_insn): Rename it to m88k_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m88k_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mep-tdep.c (breakpoint): Rename it to mep_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(mep_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* microblaze-tdep.c (break_insn): Rename it to
microblaze_break_insn and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(microblaze_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* mn10300-tdep.c (breakpoint): Rename it to mn10300_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(mn10300_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* moxie-tdep.c (breakpoint): Rename it to moxie_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(moxie_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* msp430-tdep.c (breakpoint): Rename it to msp430_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(msp430_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* nds32-tdep.c (break_insn): Rename it to nds32_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(nds32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* nios2-tdep.c (nios2_gdbarch_init): Likewise.
* rl78-tdep.c (breakpoint): Rename it to rl78_break_ins
and change its type to rl78_break_insn. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(rl78_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* rs6000-tdep.c (big_breakpoint): Change its type to
constexpr.
(little_breakpoint): Likewise.
Don't use GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN.
(rs6000_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* rx-tdep.c (breakpoint): Rename it to rx_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(rx_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* s390-linux-tdep.c (breakpoint): Rename it to s390_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION
(s390_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* score-tdep.c (score_gdbarch_init): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sh64-tdep.c (sh64_gdbarch_init): Likewise.
* sparc-tdep.c (break_insn): Rename it to sparc_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(sparc32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* spu-tdep.c (breakpoint): Rename it to spu_break_insn and change
its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(spu_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
* tilegx-tdep.c (breakpoint): Rename it to tilegx_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(tilegx_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* v850-tdep.c (v850_gdbarch_init): Likewise.
* vax-tdep.c (break_insn): Rename it to vax_break_insn and
change its type to constexpr.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(vax_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* xstormy16-tdep.c (breakpoint): Rename it to
xstormy16_break_insn and change its type to constexpr.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(xstormy16_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* xtensa-tdep.c (xtensa_gdbarch_init): Likewise.
|
|
Many archs have only one kind of breakpoint, so their breakpoint_from_pc
implementations are quite similar. This patch uses macro
GDBARCH_BREAKPOINT_MANIPULATION and SET_GDBARCH_BREAKPOINT_MANIPULATION
for breakpoint_from_pc, so that we can easily switch from
breakpoint_from_pc to breakpoint_kind_from_pc and sw_breakpoint_from_kind
later.
gdb:
2016-11-03 Yao Qi <yao.qi@linaro.org>
* arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): New macro.
(SET_GDBARCH_BREAKPOINT_MANIPULATION): New macro.
aarch64-tdep.c (aarch64_breakpoint_from_pc): Remove. Use
GDBARCH_BREAKPOINT_MANIPULATION.
(aarch64_gdbarch_init): Replace set_gdbarch_breakpoint_from_pc
with SET_GDBARCH_BREAKPOINT_MANIPULATION.
* alpha-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* frv-tdep.c: Likewise.
* ft32-tdep.c: Likewise.
* h8300-tdep.c: Likewise.
* hppa-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* lm32-tdep.c: Likewise.
* m32c-tdep.c: Likewise.
* m68hc11-tdep.c: Likewise.
* m68k-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* mep-tdep.c: Likewise.
* microblaze-tdep.c: Likewise.
* mn10300-tdep.c: Likewise.
* moxie-tdep.c: Likewise.
* msp430-tdep.c: Likewise.
* rl78-tdep.c: Likewise.
* rx-tdep.c: Likewise.
* s390-linux-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* spu-tdep.c: Likewise.
* tilegx-tdep.c: Likewise.
* vax-tdep.c: Likewise.
* xstormy16-tdep.c: Likewise.
|
|
Make sure the architecture is `bfd_arch_i386' before handling the `set
mpx' and `show mpx' commands, avoiding the issue with `i386_mpx_enabled'
interpreting `gdbarch->tdep' according to the `struct gdbarch_tdep'
definition in i386-tdep.h while indeed in a multi-target configuration
it may have a different layout and cause GDB to crash or at least
misbehave.
gdb/
* i386-tdep.c (i386_mpx_info_bounds): Make sure the architecture
is `bfd_arch_i386' before proceeding.
(i386_mpx_set_bounds): Likewise.
|
|
Otherwise including <string> or some other C++ header is broken.
E.g.:
In file included from /opt/gcc/include/c++/7.0.0/bits/char_traits.h:39:0,
from /opt/gcc/include/c++/7.0.0/string:40,
from /home/pedro/gdb/mygit/cxx-convertion/src/gdb/infrun.c:68:
/opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:243:56: error: macro "min" passed 3 arguments, but takes just 2
min(const _Tp& __a, const _Tp& __b, _Compare __comp)
^
/opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:265:56: error: macro "max" passed 3 arguments, but takes just 2
max(const _Tp& __a, const _Tp& __b, _Compare __comp)
^
In file included from .../src/gdb/infrun.c:21:0:
To the best of my grepping abilities, I believe I adjusted all min/max
calls.
gdb/ChangeLog:
2016-09-16 Pedro Alves <palves@redhat.com>
* defs.h (min, max): Delete.
* aarch64-tdep.c: Include <algorithm> and use std::min and
std::max throughout.
* aarch64-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* amd64-tdep.c: Likewise.
* amd64-windows-tdep.c: Likewise.
* arm-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* breakpoint.c: Likewise.
* btrace.c: Likewise.
* ctf.c: Likewise.
* disasm.c: Likewise.
* doublest.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* environ.c: Likewise.
* exec.c: Likewise.
* f-exp.y: Likewise.
* findcmd.c: Likewise.
* ft32-tdep.c: Likewise.
* gcore.c: Likewise.
* hppa-tdep.c: Likewise.
* i386-darwin-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* linux-thread-db.c: Likewise.
* lm32-tdep.c: Likewise.
* m32r-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* memrange.c: Likewise.
* minidebug.c: Likewise.
* mips-tdep.c: Likewise.
* moxie-tdep.c: Likewise.
* nds32-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* nto-procfs.c: Likewise.
* parse.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* probe.c: Likewise.
* record-btrace.c: Likewise.
* remote.c: Likewise.
* rs6000-tdep.c: Likewise.
* rx-tdep.c: Likewise.
* s390-linux-nat.c: Likewise.
* s390-linux-tdep.c: Likewise.
* ser-tcp.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* source.c: Likewise.
* sparc-tdep.c: Likewise.
* symfile.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* tic6x-tdep.c: Likewise.
* tilegx-tdep.c: Likewise.
* tracefile-tfile.c: Likewise.
* tracepoint.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* xtensa-tdep.c: Likewise.
* cli/cli-cmds.c: Likewise.
* compile/compile-object-load.c: Likewise.
|
|
Now that all the prerequisites are in place, this commit finally adds support
for handling the __float128 type on Intel and Power, by providing appropriate
platform-specific versions of the floatformat_for_type callback.
Since at this point we do not yet have any indication in the debug info to
distinguish different floating-point formats of the same length, we simply
use the type name as hint. Types named "__float128" get the IEEE format.
In addition to handling "__float128" itself, we also recognize "_Float128"
and (on Power) "_Float64x", as well as the complex versions of those.
(As pointed out by Joseph Myers, starting with GCC 7, __float128 is just
a typedef for _Float128 -- but it's good to handle this anyway.)
A new test case does some simple verification that the format is decoded
correctly, using both __float128 and "long double" to make sure using both
in the same file still works. Another new test verifies handling of the
_FloatN and _FloatNx types supported by GCC 7, as well as the complex
versions of those types.
Note that this still only supports basic format decoding and encoding.
We do not yet support the GNU extension 'g' suffix for __float128 constants.
In addition, since all *arithmetic* on floating-point values is still
performed in native host "long double" arithmetic, if that format is not
able to encode all target __float128 values, we may get incorrect results.
(To fix this would require implementing fully synthetic target floating-
point arithmetic along the lines of GCC's real.c, presumably using MPFR.)
gdb/ChangeLog:
* i386-tdep.c (i386_floatformat_for_type): New function.
(i386_gdbarch_init): Install it.
* ppc-linux-tdep.c (ppc_floatformat_for_type): New function.
(ppc_linux_init_abi): Install it.
gdb/testsuite/ChangeLog:
* gdb.base/float128.c: New file.
* gdb.base/float128.exp: Likewise.
* gdb.base/floatn.c: Likewise.
* gdb.base/floatn.exp: Likewise.
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
|
|
gdb/ChangeLog:
2016-05-07 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* aarch64-linux-tdep.c (aarch64_linux_sigframe_init): Remove unused
variables.
* aarch64-tdep.c (aarch64_skip_prologue): Likewise.
(aarch64_scan_prologue): Likewise.
(aarch64_prologue_prev_register): Likewise.
(aarch64_dwarf2_prev_register): Likewise.
(pass_in_v): Likewise.
(aarch64_push_dummy_call): Likewise.
(aarch64_breakpoint_from_pc): Likewise.
(aarch64_return_in_memory): Likewise.
(aarch64_return_value): Likewise.
(aarch64_displaced_step_b_cond): Likewise.
(aarch64_displaced_step_cb): Likewise.
(aarch64_displaced_step_tb): Likewise.
(aarch64_gdbarch_init): Likewise.
(aarch64_process_record): Likewise.
* alpha-mdebug-tdep.c (alpha_mdebug_init_abi): Likewise.
* alpha-tdep.c (_initialize_alpha_tdep): Likewise.
* amd64-dicos-tdep.c (amd64_dicos_init_abi): Likewise.
* amd64-linux-tdep.c (amd64_dtrace_parse_probe_argument): Likewise.
* amd64-tdep.c (fixup_riprel): Likewise.
* amd64-windows-tdep.c (amd64_windows_frame_decode_epilogue): Likewise.
(amd64_windows_frame_decode_insns): Likewise.
(amd64_windows_frame_cache): Likewise.
(amd64_windows_frame_prev_register): Likewise.
(amd64_windows_frame_this_id): Likewise.
(amd64_windows_init_abi): Likewise.
* arm-linux-tdep.c (arm_linux_get_syscall_number): Likewise.
(arm_linux_get_next_pcs_syscall_next_pc): Likewise.
* arm-symbian-tdep.c (arm_symbian_init_abi): Likewise.
* arm-tdep.c (arm_make_epilogue_frame_cache): Likewise.
(arm_epilogue_frame_prev_register): Likewise.
(arm_record_vdata_transfer_insn): Likewise.
(arm_record_exreg_ld_st_insn): Likewise.
* auto-load.c (execute_script_contents): Likewise.
(print_scripts): Likewise.
* avr-tdep.c (avr_frame_prev_register): Likewise.
(avr_push_dummy_call): Likewise.
* bfin-linux-tdep.c (bfin_linux_sigframe_init): Likewise.
* bfin-tdep.c (bfin_gdbarch_init): Likewise.
* blockframe.c (find_pc_partial_function_gnu_ifunc): Likewise.
* break-catch-throw.c (fetch_probe_arguments): Likewise.
* breakpoint.c (breakpoint_xfer_memory): Likewise.
(breakpoint_init_inferior): Likewise.
(breakpoint_inserted_here_p): Likewise.
(software_breakpoint_inserted_here_p): Likewise.
(hardware_breakpoint_inserted_here_p): Likewise.
(bpstat_what): Likewise.
(break_range_command): Likewise.
(save_breakpoints): Likewise.
* coffread.c (coff_symfile_read): Likewise.
* cris-tdep.c (cris_push_dummy_call): Likewise.
(cris_scan_prologue): Likewise.
(cris_register_size): Likewise.
(_initialize_cris_tdep): Likewise.
* d-exp.y: Likewise.
* dbxread.c (dbx_read_symtab): Likewise.
(process_one_symbol): Likewise.
(coffstab_build_psymtabs): Likewise.
(elfstab_build_psymtabs): Likewise.
* dicos-tdep.c (dicos_init_abi): Likewise.
* disasm.c (do_mixed_source_and_assembly): Likewise.
(gdb_disassembly): Likewise.
* dtrace-probe.c (dtrace_process_dof): Likewise.
* dwarf2read.c (error_check_comp_unit_head): Likewise.
(build_type_psymtabs_1): Likewise.
(skip_one_die): Likewise.
(process_imported_unit_die): Likewise.
(dwarf2_physname): Likewise.
(read_file_scope): Likewise.
(setup_type_unit_groups): Likewise.
(create_dwo_cu_reader): Likewise.
(create_dwo_cu): Likewise.
(create_dwo_unit_in_dwp_v1): Likewise.
(create_dwo_unit_in_dwp_v2): Likewise.
(lookup_dwo_unit_in_dwp): Likewise.
(free_dwo_file): Likewise.
(check_producer): Likewise.
(dwarf2_add_typedef): Likewise.
(dwarf2_add_member_fn): Likewise.
(read_unsigned_leb128): Likewise.
(read_signed_leb128): Likewise.
(dwarf2_const_value): Likewise.
(follow_die_sig_1): Likewise.
(dwarf_decode_macro_bytes): Likewise.
* extension.c (restore_active_ext_lang): Likewise.
* frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise.
* ft32-tdep.c (ft32_analyze_prologue): Likewise.
* gdbtypes.c (lookup_typename): Likewise.
(resolve_dynamic_range): Likewise.
(check_typedef): Likewise.
* h8300-tdep.c (h8300_is_argument_spill): Likewise.
(h8300_gdbarch_init): Likewise.
* hppa-tdep.c (hppa32_push_dummy_call): Likewise.
(hppa_frame_this_id): Likewise.
(_initialize_hppa_tdep): Likewise.
* hppanbsd-tdep.c (hppanbsd_sigtramp_cache_init): Likewise.
* hppaobsd-tdep.c (hppaobsd_supply_fpregset): Likewise.
* i386-dicos-tdep.c (i386_dicos_init_abi): Likewise.
* i386-tdep.c (i386_bnd_type): Likewise.
(i386_gdbarch_init): Likewise.
(i386_mpx_bd_base): Likewise.
* i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Likewise.
* i386obsd-tdep.c (i386obsd_elf_init_abi): Likewise.
* ia64-tdep.c (examine_prologue): Likewise.
(ia64_frame_cache): Likewise.
(ia64_push_dummy_call): Likewise.
* infcmd.c (finish_command_fsm_async_reply_reason): Likewise.
(default_print_one_register_info): Likewise.
* infrun.c (infrun_thread_ptid_changed): Likewise.
(thread_still_needs_step_over): Likewise.
(stop_all_threads): Likewise.
(restart_threads): Likewise.
(keep_going_stepped_thread): Likewise.
* iq2000-tdep.c (iq2000_scan_prologue): Likewise.
* language.c (language_init_primitive_type_symbols): Likewise.
* linespec.c (add_sal_to_sals): Likewise.
* linux-nat.c (status_callback): Likewise.
(kill_unfollowed_fork_children): Likewise.
(linux_nat_kill): Likewise.
* linux-tdep.c (linux_fill_prpsinfo): Likewise.
* linux-thread-db.c (thread_db_notice_clone): Likewise.
(record_thread): Likewise.
* location.c (string_to_event_location_basic): Likewise.
* m32c-tdep.c (m32c_prev_register): Likewise.
* m32r-linux-tdep.c (m32r_linux_init_abi): Likewise.
* m32r-tdep.c (decode_prologue): Likewise.
* m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
* machoread.c (macho_symtab_read): Likewise.
(macho_symfile_read): Likewise.
(macho_symfile_offsets): Likewise.
* maint.c (set_per_command_cmd): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
(mi_cmd_stack_list_variables): Likewise.
* mi/mi-main.c (mi_cmd_exec_run): Likewise.
(output_register): Likewise.
(mi_cmd_execute): Likewise.
(mi_cmd_trace_define_variable): Likewise.
(print_variable_or_computed): Likewise.
* minsyms.c (prim_record_minimal_symbol_full): Likewise.
* mn10300-tdep.c (mn10300_frame_prev_register): Likewise.
* msp430-tdep.c (msp430_pseudo_register_write): Likewise.
* mt-tdep.c (mt_registers_info): Likewise.
* nios2-tdep.c (nios2_analyze_prologue): Likewise.
(nios2_push_dummy_call): Likewise.
(nios2_frame_unwind_cache): Likewise.
(nios2_stub_frame_cache): Likewise.
(nios2_stub_frame_sniffer): Likewise.
(nios2_gdbarch_init): Likewise.
* ppc-ravenscar-thread.c: Likewise.
* ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise.
* python/py-evts.c (add_new_registry): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
(bpfinishpy_detect_out_scope_cb): Likewise.
* python/py-framefilter.c (py_print_value): Likewise.
* python/py-inferior.c (infpy_write_memory): Likewise.
* python/py-infevents.c (create_inferior_call_event_object): Likewise.
* python/py-infthread.c (thpy_get_ptid): Likewise.
* python/py-linetable.c (ltpy_get_pcs_for_line): Likewise.
(ltpy_get_all_source_lines): Likewise.
(ltpy_is_valid): Likewise.
(ltpy_iternext): Likewise.
* python/py-symtab.c (symtab_and_line_to_sal_object): Likewise.
* python/py-unwind.c (pyuw_object_attribute_to_pointer): Likewise.
(unwind_infopy_str): Likewise.
* python/py-varobj.c (py_varobj_get_iterator): Likewise.
* ravenscar-thread.c (ravenscar_inferior_created): Likewise.
* rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise.
* rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise.
* s390-linux-tdep.c (s390_supply_tdb_regset): Likewise.
(s390_frame_prev_register): Likewise.
(s390_dwarf2_frame_init_reg): Likewise.
(s390_record_vr): Likewise.
(s390_process_record): Likewise.
* score-tdep.c (score_push_dummy_call): Likewise.
(score3_analyze_prologue): Likewise.
* sh-tdep.c (sh_extract_return_value_nofpu): Likewise.
* sh64-tdep.c (sh64_analyze_prologue): Likewise.
(sh64_push_dummy_call): Likewise.
(sh64_extract_return_value): Likewise.
(sh64_do_fp_register): Likewise.
* solib-aix.c (solib_aix_get_section_offsets): Likewise.
* solib-darwin.c (darwin_read_exec_load_addr_from_dyld): Likewise.
(darwin_solib_read_all_image_info_addr): Likewise.
* solib-dsbt.c (enable_break): Likewise.
* solib-frv.c (enable_break2): Likewise.
(frv_fdpic_find_canonical_descriptor): Likewise.
* solib-svr4.c (svr4_handle_solib_event): Likewise.
* sparc-tdep.c (sparc_skip_stack_check): Likewise.
* sparc64-linux-tdep.c (sparc64_linux_get_longjmp_target): Likewise.
* sparcobsd-tdep.c (sparc32obsd_init_abi): Likewise.
* spu-tdep.c (info_spu_dma_cmdlist): Likewise.
* stack.c (read_frame_local): Likewise.
* symfile.c (symbol_file_add_separate): Likewise.
(remove_symbol_file_command): Likewise.
* symmisc.c (maintenance_print_one_line_table): Likewise.
* symtab.c (symbol_cache_flush): Likewise.
(basic_lookup_transparent_type): Likewise.
(sort_search_symbols_remove_dups): Likewise.
* target.c (target_memory_map): Likewise.
(target_detach): Likewise.
(target_resume): Likewise.
(acquire_fileio_fd): Likewise.
(target_store_registers): Likewise.
* thread.c (print_thread_info_1): Likewise.
* tic6x-tdep.c (tic6x_analyze_prologue): Likewise.
* tilegx-linux-tdep.c (tilegx_linux_sigframe_init): Likewise.
* tilegx-tdep.c (tilegx_push_dummy_call): Likewise.
(tilegx_analyze_prologue): Likewise.
(tilegx_stack_frame_destroyed_p): Likewise.
(tilegx_frame_cache): Likewise.
* tracefile.c (trace_save): Likewise.
* tracepoint.c (encode_actions_and_make_cleanup): Likewise.
(start_tracing): Likewise.
(print_one_static_tracepoint_marker): Likewise.
* tui/tui.c (tui_enable): Likewise.
* valops.c (value_struct_elt_bitpos): Likewise.
(find_overload_match): Likewise.
(find_oload_champ): Likewise.
* value.c (value_contents_copy_raw): Likewise.
* windows-tdep.c (windows_get_tlb_type): Likewise.
* x86-linux-nat.c (x86_linux_enable_btrace): Likewise.
* xcoffread.c (record_minimal_symbol): Likewise.
(scan_xcoff_symtab): Likewise.
* xtensa-tdep.c (execute_code): Likewise.
(xtensa_gdbarch_init): Likewise.
(_initialize_xtensa_tdep): Likewise.
|
|
The current MPX target descriptions assume that MPX is always combined
with AVX, however that's not correct. We can have machines with MPX
and without AVX; or machines with AVX and without MPX.
This patch adds new target descriptions for machines that support
both MPX and AVX, as duplicates of the existing MPX descriptions.
The following commit will remove AVX from the MPX-only descriptions.
2016-04-16 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* amd64-linux-tdep.c (features/i386/amd64-avx-mpx-linux.c):
New include.
(amd64_linux_core_read_description): Add case for
X86_XSTATE_AVX_MPX_MASK.
(_initialize_amd64_linux_tdep): Call initialize_tdesc_amd64_avx_mpx_linux.
* amd64-linux-tdep.h (tdesc_amd64_avx_mpx_linux): New definition.
* amd64-tdep.c (features/i386/amd64-avx-mpx.c): New include.
(amd64_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
(_initialize_amd64_tdep): Call initialize_tdesc_amd64_avx_mpx.
* common/x86-xstate.h (X86_XSTATE_MPX_MASK): Remove AVX bits.
(X86_XSTATE_AVX_MPX_MASK): New case.
* features/Makefile (i386/i386-avx-mpx, i386/i386-avx-mpx-linux)
(i386/amd64-avx-mpx, i386/amd64-avx-mpx-linux): New rules.
(i386/i386-avx-mpx-expedite, i386/i386-avx-mpx-linux-expedite)
(i386/amd64-avx-mpx-expedite, i386/amd64-avx-mpx-linux-expedite):
New expedites.
* i386-linux-tdep.c (features/i386/i386-avx-mpx-linux.c): New
include.
(i386_linux_core_read_description): Add case
X86_XSTATE_AVX_MPX_MASK.
(_initialize_i386_linux_tdep): Call
initialize_tdesc_i386_avx_mpx_linux.
* i386-linux-tdep.h (tdesc_i386_avx_mpx_linux): New include.
* i386-tdep.c (features/i386/i386-avx-mpx.c): New include.
(i386_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
* x86-linux-nat.c (x86_linux_read_description): Add case for
X86_XSTATE_AVX_MPX_MASK.
* features/i386/amd64-avx-mpx-linux.xml: New file.
* features/i386/i386-avx-mpx-linux.xml: New file.
* features/i386/i386-avx-mpx.xml: New file.
* features/i386/amd64-avx-mpx.xml: New file.
* features/i386/amd64-avx-mpx-linux.c: Generated.
* features/i386/amd64-avx-mpx.c: Generated.
* features/i386/i386-avx-mpx-linux.c: Generated.
* features/i386/i386-avx-mpx.c: Generated.
* regformats/i386/amd64-avx-mpx-linux.dat: Generated.
* regformats/i386/amd64-avx-mpx.dat: Generated.
* regformats/i386/i386-avx-mpx-linux.dat: Generated.
* regformats/i386/i386-avx-mpx.dat: Generated.
gdb/gdbserver/ChangeLog:
* Makefile.in (clean): Add removal for i386-avx-mpx.c,
i386-avx-mpx-linux.c, amd64-avx-mpx.c and amd64-avx-mpx-linux.c.
(i386-avx-mpx.c, i386-avx-mpx-linux.c, amd64-avx-mpx.c)
(amd64-avx-mpx-linux.c): New rules.
(amd64-avx-mpx-linux-ipa.o, i386-avx-mpx-linux-ipa.o): New rule.
* configure.srv (srv_i386_regobj): Add i386-avx-mpx.o.
(srv_i386_linux_regobj): Add i386-avx-mpx-linux.o.
(srv_amd64_regobj): Add amd64-avx-mpx.o.
(srv_amd64_linux_regobj): Add amd64-avx-mpx-linux.o.
(srv_i386_xmlfiles): Add i386/i386-avx-mpx.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx-mpx.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx-mpx-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx-mpx-linux.xml.
(ipa_i386_linux_regobj): Add i386-avx-mpx-linux-ipa.o.
(ipa_amd64_linux_regobj): Add amd64-avx-mpx-linux-ipa.o.
* linux-x86-low.c (x86_linux_read_description): Add case for
X86_XSTATE_AVX_MPX_MASK.
(x86_get_ipa_tdesc_idx): Add cases for avx_mpx.
(initialize_low_arch): Call init_registers_amd64_avx_mpx_linux and
init_registers_i386_avx_mpx_linux.
* linux-i386-ipa.c (get_ipa_tdesc): Add case for avx_mpx.
(initialize_low_tracepoint): Call
init_registers_i386_avx_mpx_linux.
* linux-amd64-ipa.c (get_ipa_tdesc): Add case for avx_mpx.
(initialize_low_tracepoint): Call
init_registers_amd64_avx_mpx_linux.
* linux-x86-tdesc.h (X86_TDESC_AVX_MPX): New enum value.
(init_registers_amd64_avx_mpx_linux, tdesc_amd64_avx_mpx_linux)
(init_registers_i386_avx_mpx_linux, tdesc_i386_avx_mpx_linux): New
declarations.
|
|
Any time a caller calls query & friends / prompt_for_continue without
ensuring that gdb owns the terminal for input is a bug. So do that in
defaulted_query / prompt_for_continue directly instead.
An example of a case where we currently miss calling
target_terminal_ours is internal_error. Ever since defaulted_query
was made to use gdb_readline_callback, there's no way to answer the
internal error query if the internal error happens while the target is
has the terminal:
(gdb) c
Continuing.
.../src/gdb/linux-nat.c:1676: internal-error: linux_nat_resume: Assertion `dummy_counter < 10' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) _
Entering 'y' or 'n' does not work, GDB does not respond.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
PR gdb/19828
* gnu-nat.c (inf_validate_task_sc): Don't call
target_terminal_ours / target_terminal_inferior around query.
* i386-tdep.c (i386_record_lea_modrm, i386_process_record): Don't
call target_terminal_ours / target_terminal_inferior around
yquery.
* linux-record.c (record_linux_system_call): Don't call
target_terminal_ours / target_terminal_inferior around yquery.
* nto-procfs.c (interrupt_query): Don't call target_terminal_ours
/ target_terminal_inferior around query.
* record-full.c (record_full_check_insn_num): Remove
'set_terminal' parameter. Don't call target_terminal_ours /
target_terminal_inferior around query.
(record_full_message, record_full_registers_change)
(record_full_xfer_partial): Adjust.
* remote.c (interrupt_query): Don't call target_terminal_ours /
target_terminal_inferior around query.
* utils.c (defaulted_query): Install cleanup to restore target
terminal. Put target_terminal_ours_for_output in effect while
defaulted producing, and target_terminal_ours in in effect while
handling input.
(prompt_for_continue): Install cleanup to restore target terminal.
Put target_terminal_ours in in effect while handling input.
|
|
With Intel Memory Protection Extensions it was introduced the concept of
boundary violation. A boundary violations is presented to the inferior as
a segmentation fault having SIGCODE 3. This patch adds a
handler for a boundary violation extending the information displayed
when a bound violation is presented to the inferior. In the stop mode
case the debugger will also display the kind of violation: "upper" or
"lower", bounds and the address accessed.
On no stop mode the information will still remain unchanged. Additional
information about bound violations are not meaningful in that case user
does not know the line in which violation occurred as well.
When the segmentation fault handler is stop mode the out puts will be
changed as exemplified below.
The usual output of a segfault is:
Program received signal SIGSEGV, Segmentation fault
0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050,
c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68
68 value = *(p + len);
In case it is a bound violation it will be presented as:
Program received signal SIGSEGV, Segmentation fault
Upper bound violation while accessing address 0x7fffffffc3b3
Bounds: [lower = 0x7fffffffc390, upper = 0x7fffffffc3a3]
0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050,
c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68
68 value = *(p + len);
In mi mode the output of a segfault is:
*stopped,reason="signal-received",signal-name="SIGSEGV",
signal-meaning="Segmentation fault", frame={addr="0x0000000000400d7c",
func="upper",args=[{name="p", value="0x603010"},{name="a",value="0x603030"}
,{name="b",value="0x603050"}, {name="c",value="0x603070"},
{name="d",value="0x603090"},{name="len",value="7"}],
file="i386-mpx-sigsegv.c",fullname="i386-mpx-sigsegv.c",line="68"},
thread-id="1",stopped-threads="all",core="6"
in the case of a bound violation:
*stopped,reason="signal-received",signal-name="SIGSEGV",
signal-meaning="Segmentation fault",
sigcode-meaning="Upper bound violation",
lower-bound="0x603010",upper-bound="0x603023",bound-access="0x60302f",
frame={addr="0x0000000000400d7c",func="upper",args=[{name="p",
value="0x603010"},{name="a",value="0x603030"},{name="b",value="0x603050"},
{name="c",value="0x603070"},{name="d",value="0x603090"},
{name="len",value="7"}],file="i386-mpx-sigsegv.c",
fullname="i386-mpx-sigsegv.c",line="68"},thread-id="1",
stopped-threads="all",core="6"
2016-02-18 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* NEWS: Add entry for bound violation.
* amd64-linux-tdep.c (amd64_linux_init_abi_common):
Add handler for segmentation fault.
* gdbarch.sh (handle_segmentation_fault): New.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New.
(SIG_CODE_BONDARY_FAULT): New define.
(i386_linux_init_abi): Use i386_mpx_bound_violation_handler.
* i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New.
* i386-tdep.c (i386_mpx_enabled): Add as external.
* i386-tdep.c (i386_mpx_enabled): Add as external.
* infrun.c (handle_segmentation_fault): New function.
(print_signal_received_reason): Use handle_segmentation_fault.
gdb/testsuite/ChangeLog:
* gdb.arch/i386-mpx-sigsegv.c: New file.
* gdb.arch/i386-mpx-sigsegv.exp: New file.
* gdb.arch/i386-mpx-simple_segv.c: New file.
* gdb.arch/i386-mpx-simple_segv.exp: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Signals): Add bound violation display hints for
a SIGSEGV.
|
|
Makes "collect $ymm15" action work.
gdb/ChangeLog:
* amd64-tdep.c (amd64_ax_pseudo_register_collect): New function.
(amd64_init_abi): Fill ax_pseudo_register_collect hook.
* gdb/i386-tdep.c (i386_pseudo_register_read_into_value): Remove
misleading comment.
(i386_pseudo_register_write): Ditto.
(i386_ax_pseudo_register_collect): New function.
(i386_gdbarch_init): Fill ax_pseudo_register_collect hook.
* i386-tdep.h: Add i386_ax_pseudo_register_collect prototype.
|
|
The GNU Coding Standards say:
"Please do not include any trademark acknowledgements in GNU
software packages or documentation."
gdb/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
gdb/gdbserver/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
gdb/doc/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
Fixes a couple of places where we access the length field of the type
structure directly, rather than using the TYPE_LENGTH macro.
gdb/ChangeLog:
* i386-tdep.c (i386_mpx_info_bounds): Use TYPE_LENGTH.
(i386_mpx_set_bounds): Likewise.
* solib-darwin.c (darwin_load_image_infos): Likewise.
(darwin_solib_read_all_image_info_addr): Likewise.
|
|
Error was introduced to fix a build issue caused by a mismatching variable
size. The error message is changed to explicitly report what goes wrong
and how user might still investigate the issue.
2015-06-18 Walfred Tedeschi <walfred.tedeschi@intel.com>
* i386-tdep.c (i386_mpx_get_bt_entry) Improves error message.
Change-Id: I6e9c7475eba663f49bd8e720b84ad0265bcb0e92
Signed-off-by: Walfred Tedeschi <walfred.tedeschi@intel.com>
|
|
gdb/ChangeLog:
* dwarf2-frame.c (dwarf2_restore_rule): Call dwarf_reg_to_regnum
instead of gdbarch_dwarf2_reg_to_regnum.
(dwarf2_frame_cache): Ditto.
(read_addr_from_reg): Call dwarf_reg_to_regnum_or_error instead of
gdbarch_dwarf2_reg_to_regnum.
(get_reg_value): Ditto.
(dwarf2_fetch_cfa_info): Ditto.
(dwarf2_frame_prev_register): Ditto.
* dwarf2loc.c: #include "complaints.h".
(dwarf_expr_read_addr_from_reg): Call dwarf_reg_to_regnum_or_error
instead of gdbarch_dwarf2_reg_to_regnum.
(dwarf_expr_get_reg_value): Ditto.
(read_pieced_value): Ditto.
(write_pieced_value): Ditto.
(dwarf2_evaluate_loc_desc_full): Ditto.
(dwarf_reg_to_regnum): New function.
(throw_bad_regnum_error): New function.
(dwarf_reg_to_regnum_or_error): Renamed from
dwarf2_reg_to_regnum_or_errorChange to take a ULONGEST regnum.
All callers updated. Call throw_bad_regnum_error.
(locexpr_regname): Improve text of bad register number.
* dwarf2loc.h (dwarf_reg_to_regnum): Declare.
(dwarf_reg_to_regnum_or_error): Update prototype.
* dwarf2expr.c: #include "dwarf2loc.h".
(dwarf_block_to_sp_offset): Call dwarf_reg_to_regnum instead of
gdbarch_dwarf2_reg_to_regnum.
* gdbarch.sh (dwarf2_reg_to_regnum): Add comment.
* gdbarch.h: Regenerate.
* amd64-tdep.c (amd64_dwarf_reg_to_regnum): Remove warning for bad
register.
* avr-tdep.c (avr_dwarf_reg_to_regnum): Ditto.
* cris-tdep.c (cris_dwarf2_reg_to_regnum): Ditto.
* bfin-tdep.c (bfin_reg_to_regnum): Fix error checking.
* hppa-linux-tdep.c (hppa_dwarf_reg_to_regnum): Improve error checking.
Remove warning for bad register.
* hppa-tdep.c (hppa64_dwarf_reg_to_regnum): Ditto.
* i386-tdep.c (i386_svr4_dwarf_reg_to_regnum): Renamed from
i386_svr4_reg_to_regnum. Return -1 for bad registers.
(i386_svr4_reg_to_regnum): New function.
(i386_gdbarch_init): Update call to set_gdbarch_dwarf2_reg_to_regnum.
* microblaze-tdep.c (microblaze_dwarf2_reg_to_regnum): Don't assert
on bad registers, return -1.
* msp430-tdep.c (msp430_dwarf2_reg_to_regnum): Improve error checking.
Remove warning for bad register.
* nios2-tdep.c: Add static assert for NIOS2_NUM_REGS.
(nios2_dwarf_reg_to_regnum): Fix off-by-one error.
Remove warning for bad register. Return -1 for bad register.
* rl78-tdep.c (rl78_dwarf_reg_to_regnum): Don't flag an internal error
for bad register, return -1.
* rx-tdep.c (rx_dwarf_reg_to_regnum): Ditto.
* m68k-tdep.c (m68k_dwarf_reg_to_regnum): Fix error result.
* mep-tdep.c (mep_debug_reg_to_regnum): Ditto.
* mips-tdep.c (mips_stab_reg_to_regnum): Ditto.
(mips_dwarf_dwarf2_ecoff_reg_to_regnum): Ditto.
* mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Remove warning
for bad regs.
* xtensa-tdep.c (xtensa_reg_to_regnum): Remove internal error for
bad regs. Fix error result.
* stabsread.c (stab_reg_to_regnum): Watch for negative regno.
(reg_value_complaint): Update complaint text.
* mdebugread.c (reg_value_complaint): New function.
(mdebug_reg_to_regnum): Rewrite to watch for bad reg numbers.
gdb/testsuite/ChangeLog:
* lib/dwarf.exp (_location): Add support for DW_OP_regx.
* gdb.dwarf2/bad-regnum.c: New file.
* gdb.dwarf2/bad-regnum.exp: New file.
|
|
As reported by Ulrich here:
https://sourceware.org/ml/gdb-patches/2015-09/msg00604.html
The system compiler (gcc 4.1) in Centos 5 doesn't like that we cast to a
pointer to a type that doesn't exist. I see no real value in using this
kind iof construct over just using void *. So this patch changes the
tdep_info field to void * and removes the casts. Even in C++, we
should not need an explicit cast when assigning to a void *.
gdb/ChangeLog:
* gdbarch.sh (struct gdbarch_info): Change tdep_info's type to void *.
* gdbarch.h: Regenerate.
* i386-tdep.c (i386_gdbarch_init): Remove cast to
struct gdbarch_tdep_info *.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* ppc-linux-tdep (ppu2spu_sniffer): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Likewise.
* spu-multiarch.c (spu_gdbarch): Likewise.
|
|
Note: I needed to split this patch in two, otherwise it's too big for
the mailing list.
This patch adds explicit casts to situations where a void pointer is
assigned to a pointer to the "real" type. Building in C++ mode requires
those assignments to use an explicit cast. This includes, for example:
- callback arguments (cleanups, comparison functions, ...)
- data attached to some object (objfile, program space, etc) in the form
of a void pointer
- "user data" passed to some function
This patch comes from the commit "(mostly) auto-generated patch to insert
casts needed for C++", taken from Pedro's C++ branch.
Only files built on x86 with --enable-targets=all are modified, so the
native files for other arches will need to be dealt with separately.
I built-tested this with --enable-targets=all and reg-tested. To my
surprise, a test case (selftest.exp) had to be adjusted.
Here's the ChangeLog entry. Again, this was relatively quick to make
despite the length, thanks to David Malcom's script, although I don't
believe it's very useful information in that particular case...
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_make_prologue_cache): Add cast(s).
(aarch64_make_stub_cache): Likewise.
(value_of_aarch64_user_reg): Likewise.
* ada-lang.c (ada_inferior_data_cleanup): Likewise.
(get_ada_inferior_data): Likewise.
(get_ada_pspace_data): Likewise.
(ada_pspace_data_cleanup): Likewise.
(ada_complete_symbol_matcher): Likewise.
(ada_exc_search_name_matches): Likewise.
* ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
(get_ada_tasks_inferior_data): Likewise.
* addrmap.c (addrmap_mutable_foreach_worker): Likewise.
(splay_obstack_alloc): Likewise.
(splay_obstack_free): Likewise.
* alpha-linux-tdep.c (alpha_linux_supply_gregset): Likewise.
(alpha_linux_collect_gregset): Likewise.
(alpha_linux_supply_fpregset): Likewise.
(alpha_linux_collect_fpregset): Likewise.
* alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise.
* alpha-tdep.c (alpha_lds): Likewise.
(alpha_sts): Likewise.
(alpha_sigtramp_frame_unwind_cache): Likewise.
(alpha_heuristic_frame_unwind_cache): Likewise.
(alpha_supply_int_regs): Likewise.
(alpha_fill_int_regs): Likewise.
(alpha_supply_fp_regs): Likewise.
(alpha_fill_fp_regs): Likewise.
* alphanbsd-tdep.c (alphanbsd_supply_fpregset): Likewise.
(alphanbsd_aout_supply_gregset): Likewise.
(alphanbsd_supply_gregset): Likewise.
* amd64-linux-tdep.c (amd64_linux_init_abi): Likewise.
(amd64_x32_linux_init_abi): Likewise.
* amd64-nat.c (amd64_supply_native_gregset): Likewise.
(amd64_collect_native_gregset): Likewise.
* amd64-tdep.c (amd64_frame_cache): Likewise.
(amd64_sigtramp_frame_cache): Likewise.
(amd64_epilogue_frame_cache): Likewise.
(amd64_supply_fxsave): Likewise.
(amd64_supply_xsave): Likewise.
(amd64_collect_fxsave): Likewise.
(amd64_collect_xsave): Likewise.
* amd64-windows-tdep.c (amd64_windows_frame_cache): Likewise.
* amd64obsd-tdep.c (amd64obsd_trapframe_cache): Likewise.
* arm-linux-tdep.c (arm_linux_supply_gregset): Likewise.
(arm_linux_collect_gregset): Likewise.
(arm_linux_supply_nwfpe): Likewise.
(arm_linux_collect_nwfpe): Likewise.
(arm_linux_supply_vfp): Likewise.
(arm_linux_collect_vfp): Likewise.
* arm-tdep.c (arm_find_mapping_symbol): Likewise.
(arm_prologue_unwind_stop_reason): Likewise.
(arm_prologue_this_id): Likewise.
(arm_prologue_prev_register): Likewise.
(arm_exidx_data_free): Likewise.
(arm_find_exidx_entry): Likewise.
(arm_stub_this_id): Likewise.
(arm_m_exception_this_id): Likewise.
(arm_m_exception_prev_register): Likewise.
(arm_normal_frame_base): Likewise.
(gdb_print_insn_arm): Likewise.
(arm_objfile_data_free): Likewise.
(arm_record_special_symbol): Likewise.
(value_of_arm_user_reg): Likewise.
* armbsd-tdep.c (armbsd_supply_fpregset): Likewise.
(armbsd_supply_gregset): Likewise.
* auto-load.c (auto_load_pspace_data_cleanup): Likewise.
(get_auto_load_pspace_data): Likewise.
(hash_loaded_script_entry): Likewise.
(eq_loaded_script_entry): Likewise.
(clear_section_scripts): Likewise.
(collect_matching_scripts): Likewise.
* auxv.c (auxv_inferior_data_cleanup): Likewise.
(get_auxv_inferior_data): Likewise.
* avr-tdep.c (avr_frame_unwind_cache): Likewise.
* ax-general.c (do_free_agent_expr_cleanup): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
(target_bfd_xclose): Likewise.
(target_bfd_get_section_table): Likewise.
* bfin-tdep.c (bfin_frame_cache): Likewise.
* block.c (find_block_in_blockvector): Likewise.
(call_site_for_pc): Likewise.
(block_find_non_opaque_type_preferred): Likewise.
* break-catch-sig.c (signal_catchpoint_insert_location): Likewise.
(signal_catchpoint_remove_location): Likewise.
(signal_catchpoint_breakpoint_hit): Likewise.
(signal_catchpoint_print_one): Likewise.
(signal_catchpoint_print_mention): Likewise.
(signal_catchpoint_print_recreate): Likewise.
* break-catch-syscall.c (get_catch_syscall_inferior_data): Likewise.
* breakpoint.c (do_cleanup_counted_command_line): Likewise.
(bp_location_compare_addrs): Likewise.
(get_first_locp_gte_addr): Likewise.
(check_tracepoint_command): Likewise.
(do_map_commands_command): Likewise.
(get_breakpoint_objfile_data): Likewise.
(free_breakpoint_probes): Likewise.
(do_captured_breakpoint_query): Likewise.
(compare_breakpoints): Likewise.
(bp_location_compare): Likewise.
(bpstat_remove_breakpoint_callback): Likewise.
(do_delete_breakpoint_cleanup): Likewise.
* bsd-uthread.c (bsd_uthread_set_supply_uthread): Likewise.
(bsd_uthread_set_collect_uthread): Likewise.
(bsd_uthread_activate): Likewise.
(bsd_uthread_fetch_registers): Likewise.
(bsd_uthread_store_registers): Likewise.
* btrace.c (check_xml_btrace_version): Likewise.
(parse_xml_btrace_block): Likewise.
(parse_xml_btrace_pt_config_cpu): Likewise.
(parse_xml_btrace_pt_raw): Likewise.
(parse_xml_btrace_pt): Likewise.
(parse_xml_btrace_conf_bts): Likewise.
(parse_xml_btrace_conf_pt): Likewise.
(do_btrace_data_cleanup): Likewise.
* c-typeprint.c (find_typedef_for_canonicalize): Likewise.
* charset.c (cleanup_iconv): Likewise.
(do_cleanup_iterator): Likewise.
* cli-out.c (cli_uiout_dtor): Likewise.
(cli_table_begin): Likewise.
(cli_table_body): Likewise.
(cli_table_end): Likewise.
(cli_table_header): Likewise.
(cli_begin): Likewise.
(cli_end): Likewise.
(cli_field_int): Likewise.
(cli_field_skip): Likewise.
(cli_field_string): Likewise.
(cli_field_fmt): Likewise.
(cli_spaces): Likewise.
(cli_text): Likewise.
(cli_message): Likewise.
(cli_wrap_hint): Likewise.
(cli_flush): Likewise.
(cli_redirect): Likewise.
(out_field_fmt): Likewise.
(field_separator): Likewise.
(cli_out_set_stream): Likewise.
* cli/cli-cmds.c (compare_symtabs): Likewise.
* cli/cli-dump.c (call_dump_func): Likewise.
(restore_section_callback): Likewise.
* cli/cli-script.c (clear_hook_in_cleanup): Likewise.
(do_restore_user_call_depth): Likewise.
(do_free_command_lines_cleanup): Likewise.
* coff-pe-read.c (get_section_vmas): Likewise.
(pe_as16): Likewise.
(pe_as32): Likewise.
* coffread.c (coff_symfile_read): Likewise.
* common/agent.c (agent_look_up_symbols): Likewise.
* common/filestuff.c (do_close_cleanup): Likewise.
* common/format.c (free_format_pieces_cleanup): Likewise.
* common/vec.c (vec_o_reserve): Likewise.
* compile/compile-c-support.c (print_one_macro): Likewise.
* compile/compile-c-symbols.c (hash_symbol_error): Likewise.
(eq_symbol_error): Likewise.
(del_symbol_error): Likewise.
(error_symbol_once): Likewise.
(gcc_convert_symbol): Likewise.
(gcc_symbol_address): Likewise.
(hash_symname): Likewise.
(eq_symname): Likewise.
* compile/compile-c-types.c (hash_type_map_instance): Likewise.
(eq_type_map_instance): Likewise.
(insert_type): Likewise.
(convert_type): Likewise.
* compile/compile-object-load.c (munmap_listp_free_cleanup): Likewise.
(setup_sections): Likewise.
(link_hash_table_free): Likewise.
(copy_sections): Likewise.
* compile/compile-object-run.c (do_module_cleanup): Likewise.
* compile/compile.c (compile_print_value): Likewise.
(do_rmdir): Likewise.
(cleanup_compile_instance): Likewise.
(cleanup_unlink_file): Likewise.
* completer.c (free_completion_tracker): Likewise.
* corelow.c (add_to_spuid_list): Likewise.
* cp-namespace.c (reset_directive_searched): Likewise.
* cp-support.c (reset_directive_searched): Likewise.
* cris-tdep.c (cris_sigtramp_frame_unwind_cache): Likewise.
(cris_frame_unwind_cache): Likewise.
* d-lang.c (builtin_d_type): Likewise.
* d-namespace.c (reset_directive_searched): Likewise.
* dbxread.c (dbx_free_symfile_info): Likewise.
(do_free_bincl_list_cleanup): Likewise.
* disasm.c (hash_dis_line_entry): Likewise.
(eq_dis_line_entry): Likewise.
(dis_asm_print_address): Likewise.
(fprintf_disasm): Likewise.
(do_ui_file_delete): Likewise.
* doublest.c (convert_floatformat_to_doublest): Likewise.
* dummy-frame.c (pop_dummy_frame_bpt): Likewise.
(dummy_frame_prev_register): Likewise.
(dummy_frame_this_id): Likewise.
* dwarf2-frame-tailcall.c (cache_hash): Likewise.
(cache_eq): Likewise.
(cache_find): Likewise.
(tailcall_frame_this_id): Likewise.
(dwarf2_tailcall_prev_register_first): Likewise.
(tailcall_frame_prev_register): Likewise.
(tailcall_frame_dealloc_cache): Likewise.
(tailcall_frame_prev_arch): Likewise.
* dwarf2-frame.c (dwarf2_frame_state_free): Likewise.
(dwarf2_frame_set_init_reg): Likewise.
(dwarf2_frame_init_reg): Likewise.
(dwarf2_frame_set_signal_frame_p): Likewise.
(dwarf2_frame_signal_frame_p): Likewise.
(dwarf2_frame_set_adjust_regnum): Likewise.
(dwarf2_frame_adjust_regnum): Likewise.
(clear_pointer_cleanup): Likewise.
(dwarf2_frame_cache): Likewise.
(find_cie): Likewise.
(dwarf2_frame_find_fde): Likewise.
* dwarf2expr.c (dwarf_expr_address_type): Likewise.
(free_dwarf_expr_context_cleanup): Likewise.
* dwarf2loc.c (locexpr_find_frame_base_location): Likewise.
(locexpr_get_frame_base): Likewise.
(loclist_find_frame_base_location): Likewise.
(loclist_get_frame_base): Likewise.
(dwarf_expr_dwarf_call): Likewise.
(dwarf_expr_get_base_type): Likewise.
(dwarf_expr_push_dwarf_reg_entry_value): Likewise.
(dwarf_expr_get_obj_addr): Likewise.
(entry_data_value_coerce_ref): Likewise.
(entry_data_value_copy_closure): Likewise.
(entry_data_value_free_closure): Likewise.
(get_frame_address_in_block_wrapper): Likewise.
(dwarf2_evaluate_property): Likewise.
(dwarf2_compile_property_to_c): Likewise.
(needs_frame_read_addr_from_reg): Likewise.
(needs_frame_get_reg_value): Likewise.
(needs_frame_frame_base): Likewise.
(needs_frame_frame_cfa): Likewise.
(needs_frame_tls_address): Likewise.
(needs_frame_dwarf_call): Likewise.
(needs_dwarf_reg_entry_value): Likewise.
(get_ax_pc): Likewise.
(locexpr_read_variable): Likewise.
(locexpr_read_variable_at_entry): Likewise.
(locexpr_read_needs_frame): Likewise.
(locexpr_describe_location): Likewise.
(locexpr_tracepoint_var_ref): Likewise.
(locexpr_generate_c_location): Likewise.
(loclist_read_variable): Likewise.
(loclist_read_variable_at_entry): Likewise.
(loclist_describe_location): Likewise.
(loclist_tracepoint_var_ref): Likewise.
(loclist_generate_c_location): Likewise.
* dwarf2read.c (line_header_hash_voidp): Likewise.
(line_header_eq_voidp): Likewise.
(dwarf2_has_info): Likewise.
(dwarf2_get_section_info): Likewise.
(locate_dwz_sections): Likewise.
(hash_file_name_entry): Likewise.
(eq_file_name_entry): Likewise.
(delete_file_name_entry): Likewise.
(dw2_setup): Likewise.
(dw2_get_file_names_reader): Likewise.
(dw2_find_pc_sect_compunit_symtab): Likewise.
(hash_signatured_type): Likewise.
(eq_signatured_type): Likewise.
(add_signatured_type_cu_to_table): Likewise.
(create_debug_types_hash_table): Likewise.
(lookup_dwo_signatured_type): Likewise.
(lookup_dwp_signatured_type): Likewise.
(lookup_signatured_type): Likewise.
(hash_type_unit_group): Likewise.
(eq_type_unit_group): Likewise.
(get_type_unit_group): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(sort_tu_by_abbrev_offset): Likewise.
(process_skeletonless_type_unit): Likewise.
(psymtabs_addrmap_cleanup): Likewise.
(dwarf2_read_symtab): Likewise.
(psymtab_to_symtab_1): Likewise.
(die_hash): Likewise.
(die_eq): Likewise.
(load_full_comp_unit_reader): Likewise.
(reset_die_in_process): Likewise.
(free_cu_line_header): Likewise.
(handle_DW_AT_stmt_list): Likewise.
(hash_dwo_file): Likewise.
(eq_dwo_file): Likewise.
(hash_dwo_unit): Likewise.
(eq_dwo_unit): Likewise.
(create_dwo_cu_reader): Likewise.
(create_dwo_unit_in_dwp_v1): Likewise.
(create_dwo_unit_in_dwp_v2): Likewise.
(lookup_dwo_unit_in_dwp): Likewise.
(dwarf2_locate_dwo_sections): Likewise.
(dwarf2_locate_common_dwp_sections): Likewise.
(dwarf2_locate_v2_dwp_sections): Likewise.
(hash_dwp_loaded_cutus): Likewise.
(eq_dwp_loaded_cutus): Likewise.
(lookup_dwo_cutu): Likewise.
(abbrev_table_free_cleanup): Likewise.
(dwarf2_free_abbrev_table): Likewise.
(find_partial_die_in_comp_unit): Likewise.
(free_line_header_voidp): Likewise.
(follow_die_offset): Likewise.
(follow_die_sig_1): Likewise.
(free_heap_comp_unit): Likewise.
(free_stack_comp_unit): Likewise.
(dwarf2_free_objfile): Likewise.
(per_cu_offset_and_type_hash): Likewise.
(per_cu_offset_and_type_eq): Likewise.
(get_die_type_at_offset): Likewise.
(partial_die_hash): Likewise.
(partial_die_eq): Likewise.
(dwarf2_per_objfile_free): Likewise.
(hash_strtab_entry): Likewise.
(eq_strtab_entry): Likewise.
(add_string): Likewise.
(hash_symtab_entry): Likewise.
(eq_symtab_entry): Likewise.
(delete_symtab_entry): Likewise.
(cleanup_mapped_symtab): Likewise.
(add_indices_to_cpool): Likewise.
(hash_psymtab_cu_index): Likewise.
(eq_psymtab_cu_index): Likewise.
(add_address_entry_worker): Likewise.
(unlink_if_set): Likewise.
(write_one_signatured_type): Likewise.
(save_gdb_index_command): Likewise.
* elfread.c (elf_symtab_read): Likewise.
(elf_gnu_ifunc_cache_hash): Likewise.
(elf_gnu_ifunc_cache_eq): Likewise.
(elf_gnu_ifunc_record_cache): Likewise.
(elf_gnu_ifunc_resolve_by_cache): Likewise.
(elf_get_probes): Likewise.
(probe_key_free): Likewise.
* f-lang.c (builtin_f_type): Likewise.
* frame-base.c (frame_base_append_sniffer): Likewise.
(frame_base_set_default): Likewise.
(frame_base_find_by_frame): Likewise.
* frame-unwind.c (frame_unwind_prepend_unwinder): Likewise.
(frame_unwind_append_unwinder): Likewise.
(frame_unwind_find_by_frame): Likewise.
* frame.c (frame_addr_hash): Likewise.
(frame_addr_hash_eq): Likewise.
(frame_stash_find): Likewise.
(do_frame_register_read): Likewise.
(unwind_to_current_frame): Likewise.
(frame_cleanup_after_sniffer): Likewise.
* frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise.
* frv-tdep.c (frv_frame_unwind_cache): Likewise.
* ft32-tdep.c (ft32_frame_cache): Likewise.
* gcore.c (do_bfd_delete_cleanup): Likewise.
(gcore_create_callback): Likewise.
* gdb_bfd.c (hash_bfd): Likewise.
(eq_bfd): Likewise.
(gdb_bfd_open): Likewise.
(free_one_bfd_section): Likewise.
(gdb_bfd_ref): Likewise.
(gdb_bfd_unref): Likewise.
(get_section_descriptor): Likewise.
(gdb_bfd_map_section): Likewise.
(gdb_bfd_crc): Likewise.
(gdb_bfd_mark_parent): Likewise.
(gdb_bfd_record_inclusion): Likewise.
(gdb_bfd_requires_relocations): Likewise.
(print_one_bfd): Likewise.
* gdbtypes.c (type_pair_hash): Likewise.
(type_pair_eq): Likewise.
(builtin_type): Likewise.
(objfile_type): Likewise.
* gnu-v3-abi.c (vtable_ptrdiff_type): Likewise.
(vtable_address_point_offset): Likewise.
(gnuv3_get_vtable): Likewise.
(hash_value_and_voffset): Likewise.
(eq_value_and_voffset): Likewise.
(compare_value_and_voffset): Likewise.
(compute_vtable_size): Likewise.
(gnuv3_get_typeid_type): Likewise.
* go-lang.c (builtin_go_type): Likewise.
* guile/scm-block.c (bkscm_hash_block_smob): Likewise.
(bkscm_eq_block_smob): Likewise.
(bkscm_objfile_block_map): Likewise.
(bkscm_del_objfile_blocks): Likewise.
* guile/scm-breakpoint.c (bpscm_build_bp_list): Likewise.
* guile/scm-disasm.c (gdbscm_disasm_read_memory_worker): Likewise.
(gdbscm_disasm_print_address): Likewise.
* guile/scm-frame.c (frscm_hash_frame_smob): Likewise.
(frscm_eq_frame_smob): Likewise.
(frscm_inferior_frame_map): Likewise.
(frscm_del_inferior_frames): Likewise.
* guile/scm-gsmob.c (gdbscm_add_objfile_ref): Likewise.
* guile/scm-objfile.c (ofscm_handle_objfile_deleted): Likewise.
(ofscm_objfile_smob_from_objfile): Likewise.
* guile/scm-ports.c (ioscm_write): Likewise.
(ioscm_file_port_delete): Likewise.
(ioscm_file_port_rewind): Likewise.
(ioscm_file_port_put): Likewise.
(ioscm_file_port_write): Likewise.
* guile/scm-progspace.c (psscm_handle_pspace_deleted): Likewise.
(psscm_pspace_smob_from_pspace): Likewise.
* guile/scm-safe-call.c (scscm_recording_pre_unwind_handler): Likewise.
(scscm_recording_unwind_handler): Likewise.
(gdbscm_with_catch): Likewise.
(scscm_call_0_body): Likewise.
(scscm_call_1_body): Likewise.
(scscm_call_2_body): Likewise.
(scscm_call_3_body): Likewise.
(scscm_call_4_body): Likewise.
(scscm_apply_1_body): Likewise.
(scscm_eval_scheme_string): Likewise.
(gdbscm_safe_eval_string): Likewise.
(scscm_source_scheme_script): Likewise.
(gdbscm_safe_source_script): Likewise.
* guile/scm-string.c (gdbscm_call_scm_to_stringn): Likewise.
(gdbscm_call_scm_from_stringn): Likewise.
* guile/scm-symbol.c (syscm_hash_symbol_smob): Likewise.
(syscm_eq_symbol_smob): Likewise.
(syscm_get_symbol_map): Likewise.
(syscm_del_objfile_symbols): Likewise.
* guile/scm-symtab.c (stscm_hash_symtab_smob): Likewise.
(stscm_eq_symtab_smob): Likewise.
(stscm_objfile_symtab_map): Likewise.
(stscm_del_objfile_symtabs): Likewise.
* guile/scm-type.c (tyscm_hash_type_smob): Likewise.
(tyscm_eq_type_smob): Likewise.
(tyscm_type_map): Likewise.
(tyscm_copy_type_recursive): Likewise.
(save_objfile_types): Likewise.
* guile/scm-utils.c (extract_arg): Likewise.
* h8300-tdep.c (h8300_frame_cache): Likewise.
* hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind_cache): Likewise.
* hppa-tdep.c (compare_unwind_entries): Likewise.
(find_unwind_entry): Likewise.
(hppa_frame_cache): Likewise.
(hppa_stub_frame_unwind_cache): Likewise.
* hppanbsd-tdep.c (hppanbsd_supply_gregset): Likewise.
* hppaobsd-tdep.c (hppaobsd_supply_gregset): Likewise.
(hppaobsd_supply_fpregset): Likewise.
* i386-cygwin-tdep.c (core_process_module_section): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* i386-tdep.c (i386_frame_cache): Likewise.
(i386_epilogue_frame_cache): Likewise.
(i386_sigtramp_frame_cache): Likewise.
(i386_supply_gregset): Likewise.
(i386_collect_gregset): Likewise.
(i386_gdbarch_init): Likewise.
* i386obsd-tdep.c (i386obsd_aout_supply_regset): Likewise.
(i386obsd_trapframe_cache): Likewise.
* i387-tdep.c (i387_supply_fsave): Likewise.
(i387_collect_fsave): Likewise.
(i387_supply_fxsave): Likewise.
(i387_collect_fxsave): Likewise.
(i387_supply_xsave): Likewise.
(i387_collect_xsave): Likewise.
* ia64-tdep.c (ia64_frame_cache): Likewise.
(ia64_sigtramp_frame_cache): Likewise.
* infcmd.c (attach_command_continuation): Likewise.
(attach_command_continuation_free_args): Likewise.
* inferior.c (restore_inferior): Likewise.
(delete_thread_of_inferior): Likewise.
* inflow.c (inflow_inferior_data_cleanup): Likewise.
(get_inflow_inferior_data): Likewise.
(inflow_inferior_exit): Likewise.
* infrun.c (displaced_step_clear_cleanup): Likewise.
(restore_current_uiout_cleanup): Likewise.
(release_stop_context_cleanup): Likewise.
(do_restore_infcall_suspend_state_cleanup): Likewise.
(do_restore_infcall_control_state_cleanup): Likewise.
(restore_inferior_ptid): Likewise.
* inline-frame.c (block_starting_point_at): Likewise.
* iq2000-tdep.c (iq2000_frame_cache): Likewise.
* jit.c (get_jit_objfile_data): Likewise.
(get_jit_program_space_data): Likewise.
(jit_object_close_impl): Likewise.
(jit_find_objf_with_entry_addr): Likewise.
(jit_breakpoint_deleted): Likewise.
(jit_unwind_reg_set_impl): Likewise.
(jit_unwind_reg_get_impl): Likewise.
(jit_dealloc_cache): Likewise.
(jit_frame_sniffer): Likewise.
(jit_frame_prev_register): Likewise.
(jit_prepend_unwinder): Likewise.
(jit_inferior_exit_hook): Likewise.
(free_objfile_data): Likewise.
* jv-lang.c (jv_per_objfile_free): Likewise.
(get_dynamics_objfile): Likewise.
(get_java_class_symtab): Likewise.
(builtin_java_type): Likewise.
* language.c (language_string_char_type): Likewise.
(language_bool_type): Likewise.
(language_lookup_primitive_type): Likewise.
(language_lookup_primitive_type_as_symbol): Likewise.
* linespec.c (hash_address_entry): Likewise.
(eq_address_entry): Likewise.
(iterate_inline_only): Likewise.
(iterate_name_matcher): Likewise.
(decode_line_2_compare_items): Likewise.
(collect_one_symbol): Likewise.
(compare_symbols): Likewise.
(compare_msymbols): Likewise.
(add_symtabs_to_list): Likewise.
(collect_symbols): Likewise.
(compare_msyms): Likewise.
(add_minsym): Likewise.
(cleanup_linespec_result): Likewise.
* linux-fork.c (inferior_call_waitpid_cleanup): Likewise.
* linux-nat.c (delete_lwp_cleanup): Likewise.
(count_events_callback): Likewise.
(select_event_lwp_callback): Likewise.
(resume_stopped_resumed_lwps): Likewise.
* linux-tdep.c (get_linux_gdbarch_data): Likewise.
(invalidate_linux_cache_inf): Likewise.
(get_linux_inferior_data): Likewise.
(linux_find_memory_regions_thunk): Likewise.
(linux_make_mappings_callback): Likewise.
(linux_corefile_thread_callback): Likewise.
(find_mapping_size): Likewise.
* linux-thread-db.c (find_new_threads_callback): Likewise.
* lm32-tdep.c (lm32_frame_cache): Likewise.
* m2-lang.c (builtin_m2_type): Likewise.
* m32c-tdep.c (m32c_analyze_frame_prologue): Likewise.
* m32r-linux-tdep.c (m32r_linux_sigtramp_frame_cache): Likewise.
(m32r_linux_supply_gregset): Likewise.
(m32r_linux_collect_gregset): Likewise.
* m32r-tdep.c (m32r_frame_unwind_cache): Likewise.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
* m68k-tdep.c (m68k_frame_cache): Likewise.
* m68kbsd-tdep.c (m68kbsd_supply_fpregset): Likewise.
(m68kbsd_supply_gregset): Likewise.
* m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
* m88k-tdep.c (m88k_frame_cache): Likewise.
(m88k_supply_gregset): Likewise.
gdb/gdbserver/ChangeLog:
* dll.c (match_dll): Add cast(s).
(unloaded_dll): Likewise.
* linux-low.c (second_thread_of_pid_p): Likewise.
(delete_lwp_callback): Likewise.
(count_events_callback): Likewise.
(select_event_lwp_callback): Likewise.
(linux_set_resume_request): Likewise.
* server.c (accumulate_file_name_length): Likewise.
(emit_dll_description): Likewise.
(handle_qxfer_threads_worker): Likewise.
(visit_actioned_threads): Likewise.
* thread-db.c (any_thread_of): Likewise.
* tracepoint.c (same_process_p): Likewise.
(match_blocktype): Likewise.
(build_traceframe_info_xml): Likewise.
gdb/testsuite/ChangeLog:
* gdb.gdb/selftest.exp (do_steps_and_nexts): Adjust expected
source line.
|
|
Most allocation functions (if not all) return a void* pointing to the
allocated memory. In C++, we need to add an explicit cast when
assigning the result to a pointer to another type (which is the case
more often than not).
The content of this patch is taken from Pedro's branch, from commit
"(mostly) auto-generated patch to insert casts needed for C++". I
validated that the changes make sense and manually reflowed the code to
make it respect the coding style. I also found multiple places where I
could use XNEW/XNEWVEC/XRESIZEVEC/etc.
Thanks a lot to whoever did that automated script to insert casts, doing
it completely by hand would have taken a ridiculous amount of time.
Only files built on x86 with --enable-targets=all are modified. This
means that all other -nat.c files are untouched and will have to be
dealt with later by using appropiate compilers. Or maybe we can try to
build them with a regular g++ just to know where to add casts, I don't
know.
I built-tested this with --enable-targets=all and reg-tested.
Here's the changelog entry, which was not too bad to make despite the
size, thanks to David Malcom's script. I fixed some bits by hand, but
there might be some wrong parts left (hopefully not).
gdb/ChangeLog:
* aarch64-linux-tdep.c (aarch64_stap_parse_special_token): Add cast
to allocation result assignment.
* ada-exp.y (write_object_renaming): Likewise.
(write_ambiguous_var): Likewise.
(ada_nget_field_index): Likewise.
(write_var_or_type): Likewise.
* ada-lang.c (ada_decode_symbol): Likewise.
(ada_value_assign): Likewise.
(value_pointer): Likewise.
(cache_symbol): Likewise.
(add_nonlocal_symbols): Likewise.
(ada_name_for_lookup): Likewise.
(symbol_completion_add): Likewise.
(ada_to_fixed_type_1): Likewise.
(ada_get_next_arg): Likewise.
(defns_collected): Likewise.
* ada-lex.l (processId): Likewise.
(processString): Likewise.
* ada-tasks.c (read_known_tasks_array): Likewise.
(read_known_tasks_list): Likewise.
* ada-typeprint.c (decoded_type_name): Likewise.
* addrmap.c (addrmap_mutable_create_fixed): Likewise.
* amd64-tdep.c (amd64_push_arguments): Likewise.
(amd64_displaced_step_copy_insn): Likewise.
(amd64_classify_insn_at): Likewise.
(amd64_relocate_instruction): Likewise.
* amd64obsd-tdep.c (amd64obsd_sigtramp_p): Likewise.
* arch-utils.c (simple_displaced_step_copy_insn): Likewise.
(initialize_current_architecture): Likewise.
* arm-linux-tdep.c (arm_stap_parse_special_token): Likewise.
* arm-symbian-tdep.c (arm_symbian_osabi_sniffer): Likewise.
* arm-tdep.c (arm_exidx_new_objfile): Likewise.
(arm_push_dummy_call): Likewise.
(extend_buffer_earlier): Likewise.
(arm_adjust_breakpoint_address): Likewise.
(arm_skip_stub): Likewise.
* auto-load.c (filename_is_in_pattern): Likewise.
(maybe_add_script_file): Likewise.
(maybe_add_script_text): Likewise.
(auto_load_objfile_script_1): Likewise.
* auxv.c (ld_so_xfer_auxv): Likewise.
* ax-general.c (new_agent_expr): Likewise.
(grow_expr): Likewise.
(ax_reg_mask): Likewise.
* bcache.c (bcache_full): Likewise.
* breakpoint.c (program_breakpoint_here_p): Likewise.
* btrace.c (parse_xml_raw): Likewise.
* build-id.c (build_id_to_debug_bfd): Likewise.
* buildsym.c (end_symtab_with_blockvector): Likewise.
* c-exp.y (string_exp): Likewise.
(qualified_name): Likewise.
(write_destructor_name): Likewise.
(operator_stoken): Likewise.
(parse_number): Likewise.
(scan_macro_expansion): Likewise.
(yylex): Likewise.
(c_print_token): Likewise.
* c-lang.c (c_get_string): Likewise.
(emit_numeric_character): Likewise.
* charset.c (wchar_iterate): Likewise.
* cli/cli-cmds.c (complete_command): Likewise.
(make_command): Likewise.
* cli/cli-dump.c (restore_section_callback): Likewise.
(restore_binary_file): Likewise.
* cli/cli-interp.c (cli_interpreter_exec): Likewise.
* cli/cli-script.c (execute_control_command): Likewise.
* cli/cli-setshow.c (do_set_command): Likewise.
* coff-pe-read.c (add_pe_forwarded_sym): Likewise.
(read_pe_exported_syms): Likewise.
* coffread.c (coff_read_struct_type): Likewise.
(coff_read_enum_type): Likewise.
* common/btrace-common.c (btrace_data_append): Likewise.
* common/buffer.c (buffer_grow): Likewise.
* common/filestuff.c (gdb_fopen_cloexec): Likewise.
* common/format.c (parse_format_string): Likewise.
* common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): Likewise.
* common/xml-utils.c (xml_escape_text): Likewise.
* compile/compile-object-load.c (copy_sections): Likewise.
(compile_object_load): Likewise.
* compile/compile-object-run.c (compile_object_run): Likewise.
* completer.c (filename_completer): Likewise.
* corefile.c (read_memory_typed_address): Likewise.
(write_memory_unsigned_integer): Likewise.
(write_memory_signed_integer): Likewise.
(complete_set_gnutarget): Likewise.
* corelow.c (get_core_register_section): Likewise.
* cp-name-parser.y (d_grab): Likewise.
(allocate_info): Likewise.
(cp_new_demangle_parse_info): Likewise.
* cp-namespace.c (cp_scan_for_anonymous_namespaces): Likewise.
(cp_lookup_symbol_in_namespace): Likewise.
(lookup_namespace_scope): Likewise.
(find_symbol_in_baseclass): Likewise.
(cp_lookup_nested_symbol): Likewise.
(cp_lookup_transparent_type_loop): Likewise.
* cp-support.c (copy_string_to_obstack): Likewise.
(make_symbol_overload_list): Likewise.
(make_symbol_overload_list_namespace): Likewise.
(make_symbol_overload_list_adl_namespace): Likewise.
(first_component_command): Likewise.
* cp-valprint.c (cp_print_value): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* d-exp.y (StringExp): Likewise.
* d-namespace.c (d_lookup_symbol_in_module): Likewise.
(lookup_module_scope): Likewise.
(find_symbol_in_baseclass): Likewise.
(d_lookup_nested_symbol): Likewise.
* dbxread.c (find_stab_function_addr): Likewise.
(read_dbx_symtab): Likewise.
(dbx_end_psymtab): Likewise.
(cp_set_block_scope): Likewise.
* dcache.c (dcache_alloc): Likewise.
* demangle.c (_initialize_demangler): Likewise.
* dicos-tdep.c (dicos_load_module_p): Likewise.
* dictionary.c (dict_create_hashed_expandable): Likewise.
(dict_create_linear_expandable): Likewise.
(expand_hashtable): Likewise.
(add_symbol_linear_expandable): Likewise.
* dwarf2-frame.c (add_cie): Likewise.
(add_fde): Likewise.
(dwarf2_build_frame_info): Likewise.
* dwarf2expr.c (dwarf_expr_grow_stack): Likewise.
(dwarf_expr_fetch_address): Likewise.
(add_piece): Likewise.
(execute_stack_op): Likewise.
* dwarf2loc.c (chain_candidate): Likewise.
(dwarf_entry_parameter_to_value): Likewise.
(read_pieced_value): Likewise.
(write_pieced_value): Likewise.
* dwarf2read.c (dwarf2_read_section): Likewise.
(add_type_unit): Likewise.
(read_comp_units_from_section): Likewise.
(fixup_go_packaging): Likewise.
(dwarf2_compute_name): Likewise.
(dwarf2_physname): Likewise.
(create_dwo_unit_in_dwp_v1): Likewise.
(create_dwo_unit_in_dwp_v2): Likewise.
(read_func_scope): Likewise.
(read_call_site_scope): Likewise.
(dwarf2_attach_fields_to_type): Likewise.
(process_structure_scope): Likewise.
(mark_common_block_symbol_computed): Likewise.
(read_common_block): Likewise.
(abbrev_table_read_table): Likewise.
(guess_partial_die_structure_name): Likewise.
(fixup_partial_die): Likewise.
(add_file_name): Likewise.
(dwarf2_const_value_data): Likewise.
(dwarf2_const_value_attr): Likewise.
(build_error_marker_type): Likewise.
(guess_full_die_structure_name): Likewise.
(anonymous_struct_prefix): Likewise.
(typename_concat): Likewise.
(dwarf2_canonicalize_name): Likewise.
(dwarf2_name): Likewise.
(write_constant_as_bytes): Likewise.
(dwarf2_fetch_constant_bytes): Likewise.
(copy_string): Likewise.
(parse_macro_definition): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_rel_plt_read): Likewise.
(elf_gnu_ifunc_resolve_by_cache): Likewise.
(elf_gnu_ifunc_resolve_by_got): Likewise.
(elf_read_minimal_symbols): Likewise.
(elf_gnu_ifunc_record_cache): Likewise.
* event-top.c (top_level_prompt): Likewise.
(command_line_handler): Likewise.
* exec.c (resize_section_table): Likewise.
* expprint.c (print_subexp_standard): Likewise.
* fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise.
* findcmd.c (parse_find_args): Likewise.
* findvar.c (address_from_register): Likewise.
* frame.c (get_prev_frame_always): Likewise.
* gdb_bfd.c (gdb_bfd_ref): Likewise.
(get_section_descriptor): Likewise.
* gdb_obstack.c (obconcat): Likewise.
(obstack_strdup): Likewise.
* gdbtypes.c (lookup_function_type_with_arguments): Likewise.
(create_set_type): Likewise.
(lookup_unsigned_typename): Likewise.
(lookup_signed_typename): Likewise.
(resolve_dynamic_union): Likewise.
(resolve_dynamic_struct): Likewise.
(add_dyn_prop): Likewise.
(copy_dynamic_prop_list): Likewise.
(arch_flags_type): Likewise.
(append_composite_type_field_raw): Likewise.
* gdbtypes.h (INIT_FUNC_SPECIFIC): Likewise.
* gnu-v3-abi.c (gnuv3_rtti_type): Likewise.
* go-exp.y (string_exp): Likewise.
* go-lang.c (go_demangle): Likewise.
* guile/guile.c (compute_scheme_string): Likewise.
* guile/scm-cmd.c (gdbscm_parse_command_name): Likewise.
(gdbscm_canonicalize_command_name): Likewise.
* guile/scm-ports.c (ioscm_init_stdio_buffers): Likewise.
(ioscm_init_memory_port): Likewise.
(ioscm_reinit_memory_port): Likewise.
* guile/scm-utils.c (gdbscm_gc_xstrdup): Likewise.
(gdbscm_gc_dup_argv): Likewise.
* h8300-tdep.c (h8300_push_dummy_call): Likewise.
* hppa-tdep.c (internalize_unwinds): Likewise.
(read_unwind_info): Likewise.
* i386-cygwin-tdep.c (core_process_module_section): Likewise.
(windows_core_xfer_shared_libraries): Likewise.
* i386-tdep.c (i386_displaced_step_copy_insn): Likewise.
(i386_stap_parse_special_token_triplet): Likewise.
(i386_stap_parse_special_token_three_arg_disp): Likewise.
* i386obsd-tdep.c (i386obsd_sigtramp_p): Likewise.
* inf-child.c (inf_child_fileio_readlink): Likewise.
* inf-ptrace.c (inf_ptrace_fetch_register): Likewise.
(inf_ptrace_store_register): Likewise.
* infrun.c (follow_exec): Likewise.
(displaced_step_prepare_throw): Likewise.
(save_stop_context): Likewise.
(save_infcall_suspend_state): Likewise.
* jit.c (jit_read_descriptor): Likewise.
(jit_read_code_entry): Likewise.
(jit_symtab_line_mapping_add_impl): Likewise.
(finalize_symtab): Likewise.
(jit_unwind_reg_get_impl): Likewise.
* jv-exp.y (QualifiedName): Likewise.
* jv-lang.c (get_java_utf8_name): Likewise.
(type_from_class): Likewise.
(java_demangle_type_signature): Likewise.
(java_class_name_from_physname): Likewise.
* jv-typeprint.c (java_type_print_base): Likewise.
* jv-valprint.c (java_value_print): Likewise.
* language.c (add_language): Likewise.
* linespec.c (add_sal_to_sals_basic): Likewise.
(add_sal_to_sals): Likewise.
(decode_objc): Likewise.
(find_linespec_symbols): Likewise.
* linux-fork.c (fork_save_infrun_state): Likewise.
* linux-nat.c (linux_nat_detach): Likewise.
(linux_nat_fileio_readlink): Likewise.
* linux-record.c (record_linux_sockaddr): Likewise.
(record_linux_msghdr): Likewise.
(Do): Likewise.
* linux-tdep.c (linux_core_info_proc_mappings): Likewise.
(linux_collect_regset_section_cb): Likewise.
(linux_get_siginfo_data): Likewise.
* linux-thread-db.c (try_thread_db_load_from_pdir_1): Likewise.
(try_thread_db_load_from_dir): Likewise.
(thread_db_load_search): Likewise.
(info_auto_load_libthread_db): Likewise.
* m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise.
(m32c_m16c_pointer_to_address): Likewise.
* m68hc11-tdep.c (m68hc11_pseudo_register_write): Likewise.
* m68k-tdep.c (m68k_get_longjmp_target): Likewise.
* machoread.c (macho_check_dsym): Likewise.
* macroexp.c (resize_buffer): Likewise.
(gather_arguments): Likewise.
(maybe_expand): Likewise.
* macrotab.c (new_macro_key): Likewise.
(new_source_file): Likewise.
(new_macro_definition): Likewise.
* mdebugread.c (parse_symbol): Likewise.
(parse_type): Likewise.
(parse_partial_symbols): Likewise.
(psymtab_to_symtab_1): Likewise.
* mem-break.c (default_memory_insert_breakpoint): Likewise.
* mi/mi-cmd-break.c (mi_argv_to_format): Likewise.
* mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
(mi_cmd_data_read_memory_bytes): Likewise.
(mi_cmd_data_write_memory_bytes): Likewise.
(mi_cmd_trace_frame_collected): Likewise.
* mi/mi-parse.c (mi_parse_argv): Likewise.
(mi_parse): Likewise.
* minidebug.c (lzma_open): Likewise.
(lzma_pread): Likewise.
* mips-tdep.c (mips_read_fp_register_single): Likewise.
(mips_print_fp_register): Likewise.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Likewise.
* mipsread.c (read_alphacoff_dynamic_symtab): Likewise.
* mt-tdep.c (mt_register_name): Likewise.
(mt_registers_info): Likewise.
(mt_push_dummy_call): Likewise.
* namespace.c (add_using_directive): Likewise.
* nat/linux-btrace.c (perf_event_read): Likewise.
(linux_enable_bts): Likewise.
* nat/linux-osdata.c (linux_common_core_of_thread): Likewise.
* nat/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Likewise.
* nto-tdep.c (nto_find_and_open_solib): Likewise.
(nto_parse_redirection): Likewise.
* objc-lang.c (objc_demangle): Likewise.
(find_methods): Likewise.
* objfiles.c (get_objfile_bfd_data): Likewise.
(set_objfile_main_name): Likewise.
(allocate_objfile): Likewise.
(objfile_relocate): Likewise.
(update_section_map): Likewise.
* osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Likewise.
* p-exp.y (exp): Likewise.
(yylex): Likewise.
* p-valprint.c (pascal_object_print_value): Likewise.
* parse.c (initialize_expout): Likewise.
(mark_completion_tag): Likewise.
(copy_name): Likewise.
(parse_float): Likewise.
(type_stack_reserve): Likewise.
* ppc-linux-tdep.c (ppc_stap_parse_special_token): Likewise.
(ppu2spu_prev_register): Likewise.
* ppc-ravenscar-thread.c (supply_register_at_address): Likewise.
* printcmd.c (printf_wide_c_string): Likewise.
(printf_pointer): Likewise.
* probe.c (parse_probes): Likewise.
* python/py-cmd.c (gdbpy_parse_command_name): Likewise.
(cmdpy_init): Likewise.
* python/py-gdb-readline.c (gdbpy_readline_wrapper): Likewise.
* python/py-symtab.c (set_sal): Likewise.
* python/py-unwind.c (pyuw_sniffer): Likewise.
* python/python.c (python_interactive_command): Likewise.
(compute_python_string): Likewise.
* ravenscar-thread.c (get_running_thread_id): Likewise.
* record-full.c (record_full_exec_insn): Likewise.
(record_full_core_open_1): Likewise.
* regcache.c (regcache_raw_read_signed): Likewise.
(regcache_raw_read_unsigned): Likewise.
(regcache_cooked_read_signed): Likewise.
(regcache_cooked_read_unsigned): Likewise.
* remote-fileio.c (remote_fileio_func_open): Likewise.
(remote_fileio_func_rename): Likewise.
(remote_fileio_func_unlink): Likewise.
(remote_fileio_func_stat): Likewise.
(remote_fileio_func_system): Likewise.
* remote-mips.c (mips_xfer_memory): Likewise.
(mips_load_srec): Likewise.
(pmon_end_download): Likewise.
* remote.c (new_remote_state): Likewise.
(map_regcache_remote_table): Likewise.
(remote_register_number_and_offset): Likewise.
(init_remote_state): Likewise.
(get_memory_packet_size): Likewise.
(remote_pass_signals): Likewise.
(remote_program_signals): Likewise.
(remote_start_remote): Likewise.
(remote_check_symbols): Likewise.
(remote_query_supported): Likewise.
(extended_remote_attach): Likewise.
(process_g_packet): Likewise.
(store_registers_using_G): Likewise.
(putpkt_binary): Likewise.
(read_frame): Likewise.
(compare_sections_command): Likewise.
(remote_hostio_pread): Likewise.
(remote_hostio_readlink): Likewise.
(remote_file_put): Likewise.
(remote_file_get): Likewise.
(remote_pid_to_exec_file): Likewise.
(_initialize_remote): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
(rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
* rs6000-tdep.c (ppc_displaced_step_copy_insn): Likewise.
(bfd_uses_spe_extensions): Likewise.
* s390-linux-tdep.c (s390_displaced_step_copy_insn): Likewise.
* score-tdep.c (score7_malloc_and_get_memblock): Likewise.
* solib-dsbt.c (decode_loadmap): Likewise.
(fetch_loadmap): Likewise.
(scan_dyntag): Likewise.
(enable_break): Likewise.
(dsbt_relocate_main_executable): Likewise.
* solib-frv.c (fetch_loadmap): Likewise.
(enable_break2): Likewise.
(frv_relocate_main_executable): Likewise.
* solib-spu.c (spu_relocate_main_executable): Likewise.
(spu_bfd_open): Likewise.
* solib-svr4.c (lm_info_read): Likewise.
(read_program_header): Likewise.
(find_program_interpreter): Likewise.
(scan_dyntag): Likewise.
(elf_locate_base): Likewise.
(open_symbol_file_object): Likewise.
(read_program_headers_from_bfd): Likewise.
(svr4_relocate_main_executable): Likewise.
* solib-target.c (solib_target_relocate_section_addresses): Likewise.
* solib.c (solib_find_1): Likewise.
(exec_file_find): Likewise.
(solib_find): Likewise.
* source.c (openp): Likewise.
(print_source_lines_base): Likewise.
(forward_search_command): Likewise.
* sparc-ravenscar-thread.c (supply_register_at_address): Likewise.
* spu-tdep.c (spu2ppu_prev_register): Likewise.
(spu_get_overlay_table): Likewise.
* stabsread.c (patch_block_stabs): Likewise.
(define_symbol): Likewise.
(again:): Likewise.
(read_member_functions): Likewise.
(read_one_struct_field): Likewise.
(read_enum_type): Likewise.
(common_block_start): Likewise.
* stack.c (read_frame_arg): Likewise.
(backtrace_command): Likewise.
* stap-probe.c (stap_parse_register_operand): Likewise.
* symfile.c (syms_from_objfile_1): Likewise.
(find_separate_debug_file): Likewise.
(load_command): Likewise.
(load_progress): Likewise.
(load_section_callback): Likewise.
(reread_symbols): Likewise.
(add_filename_language): Likewise.
(allocate_compunit_symtab): Likewise.
(read_target_long_array): Likewise.
(simple_read_overlay_table): Likewise.
* symtab.c (symbol_set_names): Likewise.
(resize_symbol_cache): Likewise.
(rbreak_command): Likewise.
(completion_list_add_name): Likewise.
(completion_list_objc_symbol): Likewise.
(add_filename_to_list): Likewise.
* target-descriptions.c (maint_print_c_tdesc_cmd): Likewise.
* target-memory.c (target_write_memory_blocks): Likewise.
* target.c (target_read_string): Likewise.
(read_whatever_is_readable): Likewise.
(target_read_alloc_1): Likewise.
(simple_search_memory): Likewise.
(target_fileio_read_alloc_1): Likewise.
* tilegx-tdep.c (tilegx_push_dummy_call): Likewise.
* top.c (command_line_input): Likewise.
* tracefile-tfile.c (tfile_fetch_registers): Likewise.
* tracefile.c (tracefile_fetch_registers): Likewise.
* tracepoint.c (add_memrange): Likewise.
(init_collection_list): Likewise.
(add_aexpr): Likewise.
(trace_dump_actions): Likewise.
(parse_trace_status): Likewise.
(parse_tracepoint_definition): Likewise.
(parse_tsv_definition): Likewise.
(parse_static_tracepoint_marker_definition): Likewise.
* tui/tui-file.c (tui_sfileopen): Likewise.
(tui_file_adjust_strbuf): Likewise.
* tui/tui-io.c (tui_expand_tabs): Likewise.
* tui/tui-source.c (tui_set_source_content): Likewise.
* typeprint.c (find_global_typedef): Likewise.
* ui-file.c (do_ui_file_xstrdup): Likewise.
(ui_file_obsavestring): Likewise.
(mem_file_write): Likewise.
* utils.c (make_hex_string): Likewise.
(get_regcomp_error): Likewise.
(puts_filtered_tabular): Likewise.
(gdb_realpath_keepfile): Likewise.
(ldirname): Likewise.
(gdb_bfd_errmsg): Likewise.
(substitute_path_component): Likewise.
* valops.c (search_struct_method): Likewise.
(find_oload_champ_namespace_loop): Likewise.
* valprint.c (print_decimal_chars): Likewise.
(read_string): Likewise.
(generic_emit_char): Likewise.
* varobj.c (varobj_delete): Likewise.
(varobj_value_get_print_value): Likewise.
* vaxobsd-tdep.c (vaxobsd_sigtramp_sniffer): Likewise.
* windows-tdep.c (display_one_tib): Likewise.
* xcoffread.c (read_xcoff_symtab): Likewise.
(process_xcoff_symbol): Likewise.
(swap_sym): Likewise.
(scan_xcoff_symtab): Likewise.
(xcoff_initial_scan): Likewise.
* xml-support.c (gdb_xml_end_element): Likewise.
(xml_process_xincludes): Likewise.
(xml_fetch_content_from_file): Likewise.
* xml-syscall.c (xml_list_of_syscalls): Likewise.
* xstormy16-tdep.c (xstormy16_push_dummy_call): Likewise.
gdb/gdbserver/ChangeLog:
* ax.c (gdb_parse_agent_expr): Add cast to allocation result
assignment.
(gdb_unparse_agent_expr): Likewise.
* hostio.c (require_data): Likewise.
(handle_pread): Likewise.
* linux-low.c (disable_regset): Likewise.
(fetch_register): Likewise.
(store_register): Likewise.
(get_dynamic): Likewise.
(linux_qxfer_libraries_svr4): Likewise.
* mem-break.c (delete_fast_tracepoint_jump): Likewise.
(set_fast_tracepoint_jump): Likewise.
(uninsert_fast_tracepoint_jumps_at): Likewise.
(reinsert_fast_tracepoint_jumps_at): Likewise.
(validate_inserted_breakpoint): Likewise.
(clone_agent_expr): Likewise.
* regcache.c (init_register_cache): Likewise.
* remote-utils.c (putpkt_binary_1): Likewise.
(decode_M_packet): Likewise.
(decode_X_packet): Likewise.
(look_up_one_symbol): Likewise.
(relocate_instruction): Likewise.
(monitor_output): Likewise.
* server.c (handle_search_memory): Likewise.
(handle_qxfer_exec_file): Likewise.
(handle_qxfer_libraries): Likewise.
(handle_qxfer): Likewise.
(handle_query): Likewise.
(handle_v_cont): Likewise.
(handle_v_run): Likewise.
(captured_main): Likewise.
* target.c (write_inferior_memory): Likewise.
* thread-db.c (try_thread_db_load_from_dir): Likewise.
* tracepoint.c (init_trace_buffer): Likewise.
(add_tracepoint_action): Likewise.
(add_traceframe): Likewise.
(add_traceframe_block): Likewise.
(cmd_qtdpsrc): Likewise.
(cmd_qtdv): Likewise.
(cmd_qtstatus): Likewise.
(response_source): Likewise.
(response_tsv): Likewise.
(cmd_qtnotes): Likewise.
(gdb_collect): Likewise.
(initialize_tracepoint): Likewise.
|
|
This patch removes the isize output argument from the
fast_tracepoint_valid_at gdbarch hook. It was used to return the size
of the instruction that needs to be replaced when installing a fast
tracepoint. Instead of getting this value from the
fast_tracepoint_valid_at hook, we can call the gdb_insn_length function.
If we do not do this, then architectures which do not have a restriction
on where to install the fast tracepoint will send uninitialized memory
off to GDBserver. See remote_download_tracepoint:
~~~
int isize;
if (gdbarch_fast_tracepoint_valid_at (target_gdbarch (),
tpaddr, &isize, NULL))
xsnprintf (buf + strlen (buf), BUF_SIZE - strlen (buf), ":F%x",
isize);
~~~
The default implementation of fast_tracepoint_valid_at will not set
isize resulting in uninitialized memory being sent. Later on, GDBserver
could use this information to compute a jump offset.
gdb/ChangeLog:
* arch-utils.c (default_fast_tracepoint_valid_at): Remove unused
isize argument.
* arch-utils.h (default_fast_tracepoint_valid_at): Likewise.
* breakpoint.c (check_fast_tracepoint_sals): Adjust call to
gdbarch_fast_tracepoint_valid_at.
* gdbarch.sh (fast_tracepoint_valid_at): Remove isize argument.
* gdbarch.h: Regenerate.
* gdbarch.c: Regenerate.
* i386-tdep.c (i386_fast_tracepoint_valid_at): Remove isize
argument. Do not set it.
* remote.c (remote_download_tracepoint): Adjust call to
gdbarch_fast_tracepoint_valid_at. Call gdb_insn_length to get
the instruction length.
|
|
"show" functions should not throw an exception in part because it causes
the output of the commands "info set" and "show" to get truncated.
This fixes the following fails:
FAIL: gdb.base/default.exp: info set
FAIL: gdb.base/default.exp: show
gdb/ChangeLog:
* i386-tdep.c (i386_mpx_info_bounds): Don't call error, instead
use printf_unfiltered.
(set_mpx_cmd): Add missing trailing space to command string
literal.
(_initialize_i386_tdep): Give the "mpx" prefix command its
correct name.
|
|
stdint.h was added to common-defs.h some months ago and should
no longer be included directly by any file.
gdb_assert.h was added to common-defs.h nearly a year ago, but
three includes have crept in since then.
This commit removes all such redundant include directives.
gdb/ChangeLog:
* common/buffer.c (stdint.h): Do not include.
* common/print-utils.c (stdint.h): Likewise.
* compile/compile-c-symbols.c (gdb_assert.h): Likewise.
* compile/compile-c-types.c (gdb_assert.h): Likewise.
* ft32-tdep.c (gdb_assert.h): Likewise.
* guile/scm-utils.c (stdint.h): Likewise.
* i386-linux-tdep.c (stdint.h): Likewise.
* i386-tdep.c (stdint.h): Likewise.
* nat/linux-btrace.c (stdint.h): Likewise.
* nat/linux-btrace.h (stdint.h): Likewise.
* nat/linux-ptrace.c (stdint.h): Likewise.
* nat/mips-linux-watch.h (stdint.h): Likewise.
* ppc-linux-nat.c (stdint.h): Likewise.
* python/python-internal.h (stdint.h): Likewise.
* stub-termcap.c (stdlib.h): Likewise.
* target/target.h (stdint.h): Likewise.
* xtensa-linux-nat.c (stdint.h): Likewise.
gdb/gdbserver/ChangeLog:
* linux-i386-ipa.c (stdint.h): Do not include.
* lynx-i386-low.c (stdint.h): Likewise.
* lynx-ppc-low.c (stdint.h): Likewise.
* mem-break.c (stdint.h): Likewise.
* thread-db.c (stdint.h): Likewise.
* tracepoint.c (stdint.h): Likewise.
* win32-low.c (stdint.h): Likewise.
|
|
Types used for some variables could not be used for 32 bits, causing a
compilation failure.
This patch adds a cast to force a quite compilation, but at the same
time it bails out in the case that the cast performed is not safe, i.e.
in the case where the debuggee is 64bit and debugger is 32bit.
Documentation was also affected, once a different version of texinfo the
docs could not be build.
2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
* i386-tdep.c (i386_mpx_get_bt_entry): Add a cast for mpx_bd_mask
and bt_mask to CORE_ADDR.
doc:
* gdb.textinfo (i386): Fix "@end table" end and "@table" placement.
|
|
1. gdb/i386-tdep.c:8720: Do not use 'long long', instead use LONGEST
gdb/i386-tdep.c:8720: long long int size;
2. gdb/i386-tdep.c:8755: Do not use printf(%ll), instead use printf(%s,phex()) to dump a 'long long' value
gdb/i386-tdep.c:8755: ui_out_field_fmt (uiout, "size", "%lld", size);
2015-06-11 Walfred Tedeschi <walfred.tedeschi@intel.com>
* i386-tdep.c (i386_mpx_print_bounds): use of LONGEST instead of
long long int and plongest instead of %ll.
Signed-off-by: Walfred Tedeschi <walfred.tedeschi@intel.com>
|
|
Intel(R) Memory protection bound information are located in register
to be tested using the MPX new instructions. Since the number of
bound registers are limited a table is used to provide storage for
bounds during run-time.
In order to investigate the contents of the MPX bound table two new
commands are added to GDB. "show mpx bound" and "set mpx bound" are
used to display and set values on the MPX bound table.
2015-04-20 Walfred Tedeschi <walfred.tedeschi@intel.com>
Mircea Gherzan <mircea.gherzan@intel.com>
* i386-tdep.c (MPX_BASE_MASK, MPX_BD_MASK, MPX_BT_MASK, MPX_BD_MASK_32,
MPX_BT_MASK_32): New macros.
(i386_mpx_set_bounds): New function that implements
the command "set-mpx-bound".
(i386_mpx_enabled) Helper function to test MPX availability.
(i386_mpx_bd_base) Helper function to calculate the base directory
address. (i386_mpx_get_bt_entry) Helper function to access a bound
table entry. (i386_mpx_print_bounds) Effectively display bound
information. (_initialize_i386_tdep): Qdd new commands
to commands "set mpx" and "show mpx". (_initialize_i386_tdep):
Add "bound" to the commands "show mpx" and "set mpx" commands.
(mpx_set_cmdlist and mpx_show_cmdlist):
list for the new prefixed "set mpx" and "show mpx" commands.
* NEWS: List new commands for MPX support.
testsuite:
* gdb.arch/i386-mpx-map.c: New file.
* gdb.arch/i386-mpx-map.exp: New File.
doc:
* gdb.texinfo (i386): Add documentation about "show mpx bound"
and "set mpx bound".
|
|
We concluded that gdbarch_in_function_epilogue_p is misnamed, since it
returns true if the given PC is one instruction after the one that
destroyed the stack (which isn't necessarily inside an epilogue),
therefore it should be renamed to stack_frame_destroyed_p.
I also took the liberty of renaming the arch-specific implementations to
*_stack_frame_destroyed_p as well for consistency.
gdb:
2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
* amd64-tdep.c: Replace in_function_epilogue_p with
stack_frame_destroyed_p throughout.
* arch-utils.c: Ditto.
* arch-utils.h: Ditto.
* arm-tdep.c: Ditto.
* breakpoint.c: Ditto.
* gdbarch.sh: Ditto.
* hppa-tdep.c: Ditto.
* i386-tdep.c: Ditto.
* mips-tdep.c: Ditto.
* nios2-tdep.c: Ditto.
* rs6000-tdep.c: Ditto.
* s390-linux-tdep.c: Ditto.
* score-tdep.c: Ditto.
* sh-tdep.c: Ditto.
* sparc-tdep.c: Ditto.
* sparc-tdep.h: Ditto.
* sparc64-tdep.c: Ditto.
* spu-tdep.c: Ditto.
* tic6x-tdep.c: Ditto.
* tilegx-tdep.c: Ditto.
* xstormy16-tdep.c: Ditto.
* gdbarch.c, gdbarch.h: Re-generated.
|
|
Recognize NT_X86_XSTATE notes in FreeBSD process cores. Recent
FreeBSD versions include a note containing the XSAVE state for each
thread in the process when XSAVE is in use. The note stores a copy of
the current XSAVE mask in a reserved section of the machine-defined
XSAVE state at the same offset as Linux's NT_X86_XSTATE note.
For native processes, use the PT_GETXSTATE_INFO ptrace request to
determine if XSAVE is enabled, and if so the active XSAVE state mask
(that is, the value of %xcr0 for the target process) as well as the
size of XSAVE state area. Use the PT_GETXSTATE and PT_SETXSTATE requests
to fetch and store the XSAVE state, respectively, in the BSD x86
native targets.
In addition, the FreeBSD amd64 and i386 native targets now include
"read_description" target methods to determine the correct x86 target
description for the current XSAVE mask. On FreeBSD amd64 this also
properly returns an i386 target description for 32-bit binaries which
allows the 64-bit GDB to run 32-bit binaries.
Note that the ptrace changes are in the BSD native targets, not the
FreeBSD-specific native targets since that is where the other ptrace
register accesses occur. Of the other BSDs, NetBSD and DragonFly use
XSAVE in the kernel but do not currently export the extended state via
ptrace(2). OpenBSD does not currently support XSAVE.
bfd/ChangeLog:
* elf.c (elfcore_grok_note): Recognize NT_X86_XSTATE on
FreeBSD.
(elfcore_write_xstatereg): Use correct note name on FreeBSD.
gdb/ChangeLog:
* amd64-tdep.c (amd64_target_description): New function.
* amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
* amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
(amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
x86 extended save area.
(amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
* amd64bsd-nat.h: Export amd64bsd_xsave_len.
* amd64fbsd-nat.c (amd64fbsd_read_description): New function.
(_initialize_amd64fbsd_nat): Set "to_read_description" to
"amd64fbsd_read_description".
* amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
(amd64fbsd_supply_xstateregset): New function.
(amd64fbsd_collect_xstateregset): New function.
Add "amd64fbsd_xstateregset".
(amd64fbsd_iterate_over_regset_sections): New function.
(amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
"I386_FBSD_XSAVE_XCR0_OFFSET".
Add "iterate_over_regset_sections" gdbarch method.
Add "core_read_description" gdbarch method.
* i386-tdep.c (i386_target_description): New function.
* i386-tdep.h: Export i386_target_description and tdesc_i386.
* i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
(i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
x86 extended save area.
(i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
* i386bsd-nat.h: Export i386bsd_xsave_len.
* i386fbsd-nat.c (i386fbsd_read_description): New function.
(_initialize_i386fbsd_nat): Set "to_read_description" to
"i386fbsd_read_description".
* i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
(i386fbsd_core_read_description): New function.
(i386fbsd_supply_xstateregset): New function.
(i386fbsd_collect_xstateregset): New function.
Add "i386fbsd_xstateregset".
(i386fbsd_iterate_over_regset_sections): New function.
(i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
"I386_FBSD_XSAVE_XCR0_OFFSET".
Add "iterate_over_regset_sections" gdbarch method.
Add "core_read_description" gdbarch method.
* i386fbsd-tdep.h: New file.
|
|
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
|
|
This normalizes some exception catch blocks that check for ex.reason
to look like this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ALL)
{
...
}
if (ex.reason < 0)
{
...
}
~~~
This is a preparation step for running a script that converts all
TRY_CATCH uses to look like this instead:
~~~
TRY
{
...
}
CATCH (ex, RETURN_MASK_ALL)
{
...
}
END_CATCH
~~~
The motivation for that change is being able to reimplent TRY/CATCH in
terms of C++ try/catch.
This commit makes it so that:
- no condition other than ex.reason < 0 is checked in the if
predicate
- there's no "else" block to check whether no exception was caught
- there's no code between the TRY_CATCH (TRY) block and the
'if (ex.reason < 0)' block (CATCH).
- the exception object is no longer referred to outside the if/catch
block. Note the local volatile exception objects that are
currently defined inside functions that use TRY_CATCH will
disappear. In cases it's more convenient to still refer to the
exception outside the catch block, a new non-volatile local is
added and copy to that object is made within the catch block.
The following patches should make this all clearer.
gdb/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
(amd64_epilogue_frame_cache): Normal exception handling code.
* break-catch-throw.c (check_status_exception_catchpoint)
(re_set_exception_catchpoint): Ditto.
* cli/cli-interp.c (safe_execute_command):
* cli/cli-script.c (script_from_file): Ditto.
* compile/compile-c-symbols.c (generate_c_for_for_one_variable):
Ditto.
* compile/compile-object-run.c (compile_object_run): Ditto.
* cp-abi.c (baseclass_offset): Ditto.
* cp-valprint.c (cp_print_value): Ditto.
* exceptions.c (catch_exceptions_with_msg):
* frame-unwind.c (frame_unwind_try_unwinder): Ditto.
* frame.c (get_frame_address_in_block_if_available): Ditto.
* i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
(i386_sigtramp_frame_cache): Ditto.
* infcmd.c (post_create_inferior): Ditto.
* linespec.c (parse_linespec, find_linespec_symbols):
* p-valprint.c (pascal_object_print_value): Ditto.
* parse.c (parse_expression_for_completion): Ditto.
* python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
* remote.c (remote_get_noisy_reply): Ditto.
* s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
* solib-svr4.c (solib_svr4_r_map): Ditto.
|
|
This commit introduces a new inline common function "startswith"
which takes two string arguments and returns nonzero if the first
string starts with the second. It also updates the 295 places
where this logic was written out longhand to use the new function.
gdb/ChangeLog:
* common/common-utils.h (startswith): New inline function.
All places where this logic was used updated to use the above.
|
|
In C++, we can't do arithmetic on enums. This patch fixes build errors like:
src/gdb/i386-tdep.c: In function ‘int i386_stap_parse_special_token(gdbarch*, stap_parse_info*)’:
src/gdb/i386-tdep.c:4309:7: error: no match for ‘operator++’ (operand type is ‘i386_stap_parse_special_token(gdbarch*, stap_parse_info*)::<anonymous enum>’)
++current_state;
^
...
src/gdb/rs6000-tdep.c:4265:18: error: no match for ‘operator++’ (operand type is ‘powerpc_vector_abi’)
src/gdb/arm-tdep.c:9428:71: error: no match for ‘operator++’ (operand type is ‘arm_float_model’)
src/gdb/arm-tdep.c:9465:64: error: no match for ‘operator++’ (operand type is ‘arm_abi_kind’)
...
gdb/ChangeLog:
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
* arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
local used to iterate over enums.
* completer.c (signal_completer): Likewise.
* i386-tdep.c (i386_stap_parse_special_token): Likewise.
* rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
* tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
* tui/tui-layout.c (next_layout, prev_layout): Likewise.
* tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
(tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
* tui-wingeneral.c (tui_refresh_all): Likewise.
|
|
As reported in PR 17808, a test case with a forged (invalid) core file
can crash GDB with an assertion failure. In that particular case the
prstatus of an i386 core file looks like that from an AMD64 core file.
Consequently the respective regset supply function i386_supply_gregset
is invoked with a larger buffer than usual. But i386_supply_gregset
asserts a specific buffer size, and this assertion fails.
The patch relaxes all buffer size assertions in regset supply
functions such that they merely check for a sufficiently large buffer.
For consistency the regset collect functions are adjusted as well.
gdb/ChangeLog:
PR corefiles/17808:
* gdbarch.sh (iterate_over_regset_sections_cb): Document this
function type, particularly its SIZE parameter.
* gdbarch.h: Regenerate.
* amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
actual against required size using ">=" instead of "==".
(amd64_collect_fpregset): Likewise.
* i386-tdep.c (i386_supply_gregset): Likewise.
(i386_collect_gregset): Likewise.
(i386_supply_fpregset): Likewise.
(i386_collect_fpregset): Likewise.
* mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
(mips_fill_gregset_wrapper): Likewise.
(mips_supply_fpregset_wrapper): Likewise.
(mips_fill_fpregset_wrapper): Likewise.
(mips64_supply_gregset_wrapper): Likewise.
(mips64_fill_gregset_wrapper): Likewise.
(mips64_supply_fpregset_wrapper): Likewise.
(mips64_fill_fpregset_wrapper): Likewise.
* mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
(am33_supply_fpregset_method): Likewise.
(am33_collect_gregset_method): Likewise.
(am33_collect_fpregset_method): Likewise.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
gdb has to inform libcc1.so of the target being used, so that the
correct compiler can be invoked. The compiler is invoked using the
GNU configury triplet prefix, e.g., "x86_64-unknown-linux-gnu-gcc".
In order for this to work we need to map the gdbarch to the GNU
configury triplet arch. In most cases these are identical; however,
the x86 family poses some problems, as the BFD arch names are quite
different from the GNU triplet names. So, we introduce a new gdbarch
method for this. A regular expression is used because there are
various valid values for the arch prefix in the triplet.
This patch also updates the osabi code to associate a regular
expression with the OS ABI. I have only added a concrete value for
Linux. Note that the "-gnu" part is optional, at least on Fedora it
is omitted from the installed GCC executable's name.
gdb/ChangeLog
2014-12-12 Tom Tromey <tromey@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* osabi.h (osabi_triplet_regexp): Declare.
* osabi.c (struct osabi_names): New.
(gdb_osabi_names): Change type to struct osabi_names. Update
values.
(gdbarch_osabi_name): Update.
(osabi_triplet_regexp): New function.
(osabi_from_tdesc_string, _initialize_gdb_osabi): Update.
* i386-tdep.c (i386_gnu_triplet_regexp): New method.
(i386_elf_init_abi, i386_go32_init_abi, i386_gdbarch_init): Call
set_gdbarch_gnu_triplet_regexp.
* gdbarch.sh (gnu_triplet_regexp): New method.
* gdbarch.c, gdbarch.h: Rebuild.
* arch-utils.h (default_gnu_triplet_regexp): Declare.
* arch-utils.c (default_gnu_triplet_regexp): New function.
|
|
Currently "symtabs" in gdb are stored as a single linked list of
struct symtab that contains both symbol symtabs (the blockvectors)
and file symtabs (the linetables).
This has led to confusion, bugs, and performance issues.
This patch is conceptually very simple: split struct symtab into
two pieces: one part containing things common across the entire
compilation unit, and one part containing things specific to each
source file.
Example.
For the case of a program built out of these files:
foo.c
foo1.h
foo2.h
bar.c
foo1.h
bar.h
Today we have a single list of struct symtabs:
objfile -> foo.c -> foo1.h -> foo2.h -> bar.c -> foo1.h -> bar.h -> NULL
where "->" means the "next" pointer in struct symtab.
With this patch, that turns into:
objfile -> foo.c(cu) -> bar.c(cu) -> NULL
| |
v v
foo.c bar.c
| |
v v
foo1.h foo1.h
| |
v v
foo2.h bar.h
| |
v v
NULL NULL
where "foo.c(cu)" and "bar.c(cu)" are struct compunit_symtab objects,
and the files foo.c, etc. are struct symtab objects.
So now, for example, when we want to iterate over all blockvectors
we can now just iterate over the compunit_symtab list.
Plus a lot of the data that was either unused or replicated for each
symtab in a compilation unit now lives in struct compunit_symtab.
E.g., the objfile pointer, the producer string, etc.
I thought of moving "language" out of struct symtab but there is
logic to try to compute the language based on previously seen files,
and I think that's best left as is for now.
With my standard monster benchmark with -readnow (which I can't actually
do, but based on my calculations), whereas today the list requires
77MB to store all the struct symtabs, it now only requires 37MB.
A modest space savings given the gigabytes needed for all the debug info,
etc. Still, it's nice. Plus, whereas today we create a copy of dirname
for each source file symtab in a compilation unit, we now only create one
for the compunit.
So this patch is basically just a data structure reorg,
I don't expect significant performance improvements from it.
Notes:
1) A followup patch can do a similar split for struct partial_symtab.
I have left that until after I get the changes I want in to
better utilize .gdb_index (it may affect how we do partial syms).
2) Another followup patch *could* rename struct symtab.
The term "symtab" is ambiguous and has been a source of confusion.
In this patch I'm leaving it alone, calling it the "historical" name
of "filetabs", which is what they are now: just the file-name + line-table.
gdb/ChangeLog:
Split struct symtab into two: struct symtab and compunit_symtab.
* amd64-tdep.c (amd64_skip_xmm_prologue): Fetch producer from compunit.
* block.c (blockvector_for_pc_sect): Change "struct symtab *" argument
to "struct compunit_symtab *". All callers updated.
(set_block_compunit_symtab): Renamed from set_block_symtab. Change
"struct symtab *" argument to "struct compunit_symtab *".
All callers updated.
(get_block_compunit_symtab): Renamed from get_block_symtab. Change
result to "struct compunit_symtab *". All callers updated.
(find_iterator_compunit_symtab): Renamed from find_iterator_symtab.
Change result to "struct compunit_symtab *". All callers updated.
* block.h (struct global_block) <compunit_symtab>: Renamed from symtab.
hange type to "struct compunit_symtab *". All uses updated.
(struct block_iterator) <d.compunit_symtab>: Renamed from "d.symtab".
Change type to "struct compunit_symtab *". All uses updated.
* buildsym.c (struct buildsym_compunit): New struct.
(subfiles, buildsym_compdir, buildsym_objfile, main_subfile): Delete.
(buildsym_compunit): New static global.
(finish_block_internal): Update to fetch objfile from
buildsym_compunit.
(make_blockvector): Delete objfile argument.
(start_subfile): Rewrite to use buildsym_compunit. Don't initialize
debugformat, producer.
(start_buildsym_compunit): New function.
(free_buildsym_compunit): Renamed from free_subfiles_list.
All callers updated.
(patch_subfile_names): Rewrite to use buildsym_compunit.
(get_compunit_symtab): New function.
(get_macro_table): Delete argument comp_dir. All callers updated.
(start_symtab): Change result to "struct compunit_symtab *".
All callers updated. Create the subfile of the main source file.
(watch_main_source_file_lossage): Rewrite to use buildsym_compunit.
(reset_symtab_globals): Update.
(end_symtab_get_static_block): Update to use buildsym_compunit.
(end_symtab_without_blockvector): Rewrite.
(end_symtab_with_blockvector): Change result to
"struct compunit_symtab *". All callers updated.
Update to use buildsym_compunit. Don't set symtab->dirname,
instead set it in the compunit.
Explicitly make sure main symtab is first in its list.
Set debugformat, producer, blockvector, block_line_section, and
macrotable in the compunit.
(end_symtab_from_static_block): Change result to
"struct compunit_symtab *". All callers updated.
(end_symtab, end_expandable_symtab): Ditto.
(set_missing_symtab): Change symtab argument to
"struct compunit_symtab *". All callers updated.
(augment_type_symtab): Ditto.
(record_debugformat): Update to use buildsym_compunit.
(record_producer): Update to use buildsym_compunit.
* buildsym.h (struct subfile) <dirname>: Delete.
<producer, debugformat>: Delete.
<buildsym_compunit>: New member.
(get_compunit_symtab): Declare.
* dwarf2read.c (struct type_unit_group) <compunit_symtab>: Renamed
from primary_symtab. Change type to "struct compunit_symtab *".
All uses updated.
(dwarf2_start_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dwarf_decode_macros): Delete comp_dir argument. All callers updated.
(struct dwarf2_per_cu_quick_data) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
(dw2_instantiate_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dw2_find_last_source_symtab): Ditto.
(dw2_lookup_symbol): Ditto.
(recursively_find_pc_sect_compunit_symtab): Renamed from
recursively_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(dw2_find_pc_sect_compunit_symtab): Renamed from
dw2_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(get_compunit_symtab): Renamed from get_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(recursively_compute_inclusions): Change type of immediate_parent
argument to "struct compunit_symtab *". All callers updated.
(compute_compunit_symtab_includes): Renamed from
compute_symtab_includes. All callers updated. Rewrite to compute
includes of compunit_symtabs and not symtabs.
(process_full_comp_unit): Update to work with struct compunit_symtab.
(process_full_type_unit): Ditto.
(dwarf_decode_lines_1): Delete argument comp_dir. All callers updated.
(dwarf_decode_lines): Remove special case handling of main subfile.
(macro_start_file): Delete argument comp_dir. All callers updated.
(dwarf_decode_macro_bytes): Ditto.
* guile/scm-block.c (bkscm_print_block_syms_progress_smob): Update to
use struct compunit_symtab.
* i386-tdep.c (i386_skip_prologue): Fetch producer from compunit.
* jit.c (finalize_symtab): Build compunit_symtab.
* jv-lang.c (get_java_class_symtab): Change result to
"struct compunit_symtab *". All callers updated.
* macroscope.c (sal_macro_scope): Fetch macro table from compunit.
* macrotab.c (struct macro_table) <compunit_symtab>: Renamed from
comp_dir. Change type to "struct compunit_symtab *".
All uses updated.
(new_macro_table): Change comp_dir argument to cust,
"struct compunit_symtab *". All callers updated.
* maint.c (struct cmd_stats) <nr_compunit_symtabs>: Renamed from
nr_primary_symtabs. All uses updated.
(count_symtabs_and_blocks): Update to handle compunits.
(report_command_stats): Update output, "primary symtabs" renamed to
"compunits".
* mdebugread.c (new_symtab): Change result to
"struct compunit_symtab *". All callers updated.
(parse_procedure): Change type of search_symtab argument to
"struct compunit_symtab *". All callers updated.
* objfiles.c (objfile_relocate1): Loop over blockvectors in a
separate loop.
* objfiles.h (struct objfile) <compunit_symtabs>: Renamed from
symtabs. Change type to "struct compunit_symtab *". All uses updated.
(ALL_OBJFILE_FILETABS): Renamed from ALL_OBJFILE_SYMTABS.
All uses updated.
(ALL_OBJFILE_COMPUNITS): Renamed from ALL_OBJFILE_PRIMARY_SYMTABS.
All uses updated.
(ALL_FILETABS): Renamed from ALL_SYMTABS. All uses updated.
(ALL_COMPUNITS): Renamed from ALL_PRIMARY_SYMTABS. All uses updated.
* psympriv.h (struct partial_symtab) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
* psymtab.c (psymtab_to_symtab): Change result type to
"struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab_from_partial): Renamed from
find_pc_sect_symtab_from_partial. Change result type to
"struct compunit_symtab *". All callers updated.
(lookup_symbol_aux_psymtabs): Change result type to
"struct compunit_symtab *". All callers updated.
(find_last_source_symtab_from_partial): Ditto.
* python/py-symtab.c (stpy_get_producer): Fetch producer from compunit.
* source.c (forget_cached_source_info_for_objfile): Fetch debugformat
and macro_table from compunit.
* symfile-debug.c (debug_qf_find_last_source_symtab): Change result
type to "struct compunit_symtab *". All callers updated.
(debug_qf_lookup_symbol): Ditto.
(debug_qf_find_pc_sect_compunit_symtab): Renamed from
debug_qf_find_pc_sect_symtab, change result type to
"struct compunit_symtab *". All callers updated.
* symfile.c (allocate_symtab): Delete objfile argument.
New argument cust.
(allocate_compunit_symtab): New function.
(add_compunit_symtab_to_objfile): New function.
* symfile.h (struct quick_symbol_functions) <lookup_symbol>:
Change result type to "struct compunit_symtab *". All uses updated.
<find_pc_sect_compunit_symtab>: Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All uses updated.
* symmisc.c (print_objfile_statistics): Compute blockvector count in
separate loop.
(dump_symtab_1): Update test for primary source symtab.
(maintenance_info_symtabs): Update to handle compunit symtabs.
(maintenance_check_symtabs): Ditto.
* symtab.c (set_primary_symtab): Delete.
(compunit_primary_filetab): New function.
(compunit_language): New function.
(iterate_over_some_symtabs): Change type of arguments "first",
"after_last" to "struct compunit_symtab *". All callers updated.
Update to loop over symtabs in each compunit.
(error_in_psymtab_expansion): Rename symtab argument to cust,
and change type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab): Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_compunit_symtab): Renamed from find_pc_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_line): Only loop over symtabs within selected compunit
instead of all symtabs in the objfile.
* symtab.h (struct symtab) <blockvector>: Moved to compunit_symtab.
<compunit_symtab> New member.
<block_line_section>: Moved to compunit_symtab.
<locations_valid>: Ditto.
<epilogue_unwind_valid>: Ditto.
<macro_table>: Ditto.
<dirname>: Ditto.
<debugformat>: Ditto.
<producer>: Ditto.
<objfile>: Ditto.
<call_site_htab>: Ditto.
<includes>: Ditto.
<user>: Ditto.
<primary>: Delete
(SYMTAB_COMPUNIT): New macro.
(SYMTAB_BLOCKVECTOR): Update definition.
(SYMTAB_OBJFILE): Update definition.
(SYMTAB_DIRNAME): Update definition.
(struct compunit_symtab): New type. Common members among all source
symtabs within a compilation unit moved here. All uses updated.
(COMPUNIT_OBJFILE): New macro.
(COMPUNIT_FILETABS): New macro.
(COMPUNIT_DEBUGFORMAT): New macro.
(COMPUNIT_PRODUCER): New macro.
(COMPUNIT_DIRNAME): New macro.
(COMPUNIT_BLOCKVECTOR): New macro.
(COMPUNIT_BLOCK_LINE_SECTION): New macro.
(COMPUNIT_LOCATIONS_VALID): New macro.
(COMPUNIT_EPILOGUE_UNWIND_VALID): New macro.
(COMPUNIT_CALL_SITE_HTAB): New macro.
(COMPUNIT_MACRO_TABLE): New macro.
(ALL_COMPUNIT_FILETABS): New macro.
(compunit_symtab_ptr): New typedef.
(DEF_VEC_P (compunit_symtab_ptr)): New vector type.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Update expected output.
|
|
breakpoint.c uses gdbarch_breakpoint_from_pc to determine whether a
breakpoint location points at a permanent breakpoint:
static int
bp_loc_is_permanent (struct bp_location *loc)
{
...
addr = loc->address;
bpoint = gdbarch_breakpoint_from_pc (loc->gdbarch, &addr, &len);
...
if (target_read_memory (loc->address, target_mem, len) == 0
&& memcmp (target_mem, bpoint, len) == 0)
retval = 1;
...
So I think we should default the gdbarch_skip_permanent_breakpoint
hook to advancing the PC by the length of the breakpoint instruction,
as determined by gdbarch_breakpoint_from_pc. I believe that simple
implementation does the right thing for most architectures. If
there's an oddball architecture where that doesn't work, then it
should override the hook, just like it should be overriding the hook
if there was no default anyway.
The only two implementation of skip_permanent_breakpoint are
i386_skip_permanent_breakpoint, for x86, and
hppa_skip_permanent_breakpoint, for PA-RISC/HP-UX
The x86 implementation is trivial, and can clearly be replaced by the
new default.
I don't know about the HP-UX one though, I know almost nothing about
PA. It may well be advancing the PC ends up being equivalent.
Otherwise, it must be that "jump $pc_after_bp" doesn't work either...
Tested on x86_64 Fedora 20 native and gdbserver.
gdb/
2014-11-12 Pedro Alves <palves@redhat.com>
* arch-utils.c (default_skip_permanent_breakpoint): New function.
* arch-utils.h (default_skip_permanent_breakpoint): New
declaration.
* gdbarch.sh (skip_permanent_breakpoint): Now an 'f' function.
Install default_skip_permanent_breakpoint as default method.
* i386-tdep.c (i386_skip_permanent_breakpoint): Delete function.
(i386_gdbarch_init): Don't install it.
* infrun.c (resume): Assume there's always a
gdbarch_skip_permanent_breakpoint implementation.
* gdbarch.h, gdbarch.c: Regenerate.
|
|
defs.h includes utils.h, and utils.h includes exceptions.h. All GDB
.c files include defs.h as their first line, so no file other than
utils.h needs to include exceptions.h. This commit removes all such
inclusions.
gdb/ChangeLog:
* ada-lang.c: Do not include exceptions.h.
* ada-valprint.c: Likewise.
* amd64-tdep.c: Likewise.
* auto-load.c: Likewise.
* block.c: Likewise.
* break-catch-throw.c: Likewise.
* breakpoint.c: Likewise.
* btrace.c: Likewise.
* c-lang.c: Likewise.
* cli/cli-cmds.c: Likewise.
* cli/cli-interp.c: Likewise.
* cli/cli-script.c: Likewise.
* completer.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-support.c: Likewise.
* cp-valprint.c: Likewise.
* darwin-nat.c: Likewise.
* dwarf2-frame-tailcall.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* event-top.c: Likewise.
* f-valprint.c: Likewise.
* frame-unwind.c: Likewise.
* frame.c: Likewise.
* gdbtypes.c: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* guile/scm-auto-load.c: Likewise.
* guile/scm-breakpoint.c: Likewise.
* guile/scm-cmd.c: Likewise.
* guile/scm-frame.c: Likewise.
* guile/scm-lazy-string.c: Likewise.
* guile/scm-param.c: Likewise.
* guile/scm-symbol.c: Likewise.
* guile/scm-type.c: Likewise.
* hppa-hpux-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* inf-loop.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* infrun.c: Likewise.
* interps.c: Likewise.
* interps.h: Likewise.
* jit.c: Likewise.
* linespec.c: Likewise.
* linux-nat.c: Likewise.
* linux-thread-db.c: Likewise.
* m32r-rom.c: Likewise.
* main.c: Likewise.
* memory-map.c: Likewise.
* mi/mi-cmd-break.c: Likewise.
* mi/mi-cmd-stack.c: Likewise.
* mi/mi-interp.c: Likewise.
* mi/mi-main.c: Likewise.
* monitor.c: Likewise.
* nto-procfs.c: Likewise.
* objc-lang.c: Likewise.
* p-valprint.c: Likewise.
* parse.c: Likewise.
* ppc-linux-tdep.c: Likewise.
* printcmd.c: Likewise.
* probe.c: Likewise.
* python/py-auto-load.c: Likewise.
* python/py-breakpoint.c: Likewise.
* python/py-cmd.c: Likewise.
* python/py-finishbreakpoint.c: Likewise.
* python/py-frame.c: Likewise.
* python/py-framefilter.c: Likewise.
* python/py-function.c: Likewise.
* python/py-gdb-readline.c: Likewise.
* python/py-inferior.c: Likewise.
* python/py-infthread.c: Likewise.
* python/py-lazy-string.c: Likewise.
* python/py-linetable.c: Likewise.
* python/py-param.c: Likewise.
* python/py-prettyprint.c: Likewise.
* python/py-symbol.c: Likewise.
* python/py-type.c: Likewise.
* python/py-value.c: Likewise.
* python/python-internal.h: Likewise.
* python/python.c: Likewise.
* record-btrace.c: Likewise.
* record-full.c: Likewise.
* regcache.c: Likewise.
* remote-fileio.c: Likewise.
* remote-mips.c: Likewise.
* remote.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* rs6000-nat.c: Likewise.
* skip.c: Likewise.
* solib-darwin.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-frv.c: Likewise.
* solib-ia64-hpux.c: Likewise.
* solib-spu.c: Likewise.
* solib-svr4.c: Likewise.
* solib.c: Likewise.
* spu-tdep.c: Likewise.
* stack.c: Likewise.
* stap-probe.c: Likewise.
* symfile-mem.c: Likewise.
* symmisc.c: Likewise.
* target.c: Likewise.
* thread.c: Likewise.
* top.c: Likewise.
* tracepoint.c: Likewise.
* tui/tui-interp.c: Likewise.
* typeprint.c: Likewise.
* utils.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* windows-nat.c: Likewise.
* xml-support.c: Likewise.
|
