| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
PR rust/31082 points out that casting a 128-bit integer to a pointer
will fail. This happens because a case in value_cast was not
converted to use GMP.
This patch fixes the problem. I am not really sure that testing
against the negative value here makes sense, but I opted to just
preserve the existing behavior rather than change it.
Regression tested on x86-64 Fedora 38.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31082
|
|
Simon pointed out that the recent changes to gdb_mpz caused a build
failure on amd64 macOS. It turns out to be somewhat difficult to
overload a method in a way that will work "naturally" for all integer
types; especially in a case like gdb_mpz::operator==, where it's
desirable to special case all integer types that are no wider than
'long'.
After a false start, I came up with this patch, which seems to work.
It applies the desirable GMP special cases directly in the body,
rather than via overloads.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
In preparation for adding more 128-bit support to gdb, a few additions
to gdb_mpz are needed.
First, this adds a new 'as_integer_truncate' method. This method
works like 'as_integer' but does not require the value to fit in the
target type -- it just truncates.
Second, gdb_mpz::export_bits is changed to handle the somewhat unusual
situation of zero-length types. This can happen for a Rust '()' type;
but I think other languages have zero-bit integer types as well.
Finally, this adds some operator== overloads.
|
|
This renames gdb_mpz::safe_export to export_bits, and adds a new flag
to export a truncated value. This is needed by value arithmetic.
|
|
This adds many operator overloads and other useful methods to gdb_mpz.
This is preparation for using this class for scalar arithmetic in gdb
expression evaluation.
|
|
This renames the data member of gdb_mpf and makes it private. It also
adds a single new method to aid in this change. Unlike the earlier
changes here, I did this one all together because gdb_mpf has very few
uses.
|
|
This changes gdb_mpq to hide its data, and renames the data member
from 'val' to 'm_val', following gdb convention.
|
|
This adds some operators and methods to gdb_mpq, in preparation for
making its implementation private.
This only adds the operators currently needed by gdb. More could be
added as necessary.
|
|
This changes gdb_mpz to hide its data, and renames the data member
from 'val' to 'm_val', following gdb convention.
|
|
This adds various methods and operators to gdb_mpz, as a step toward
hiding the implementation.
This only adds the operators that were needed. Many more could be
added as required.
|
|
gmp-utils.h includes "defs.h", but normally the rule in gdb is that
the .c files include this first. This patch changes this code to
match the rest of gdb.
|
|
Replace spaces with tabs in a bunch of places.
Change-Id: If0f87180f1d13028dc178e5a8af7882a067868b0
|
|
This commit is the result of running the gdb/copyright.py script,
which automated the update of the copyright year range for all
source files managed by the GDB project to be updated to include
year 2023.
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
The gdb_mpz class currently provides a couple of methods which
essentially export an mpz_t value into either a buffer, or an integral
type. The export is based on using the mpz_export function which
we discovered can be a bit treacherous if used without caution.
In particular, the initial motivation for this patch was to catch
situations where the mpz_t value was so large that it would not fit
in the destination area. mpz_export does not know the size of
the buffer, and therefore can happily write past the end of our buffer.
While designing a solution to the above problem, I also discovered
that we also needed to be careful when exporting signed numbers.
In particular, numbers which are larger than the maximum value
for a given signed type size, but no so large as to fit in the
*unsigned* version with the same size, would end up being exported
incorrectly. This is related to the fact that mpz_export ignores
the sign of the value being exportd, and assumes an unsigned export.
Thus, for such large values, the appears as if mpz_export is able
to fit our value into our buffer, but in fact, it does not.
Also, I noticed that gdb_mpz::write wasn't taking its unsigned_p
parameter, which was a hole.
For all these reasons, a new low-level private method called
"safe_export" has been added to class gdb_mpz, whose goal is
to perform all necessary checks and manipulations for a safe
and correct export. As a bonus, this method allows us to factorize
the handling of negative value exports.
The gdb_mpz::as_integer and gdb_mpz::write methods are then simplified
to take advantage of this new safe_export method.
gdb/ChangeLog:
* gmp-utils.h (gdb_mpz::safe_export): New private method.
(gdb_mpz::as_integer): Reimplement using gdb_mpz::safe_export.
* gmp-utils.c (gdb_mpz::write): Rewrite using gdb_mpz::safe_export.
(gdb_mpz::safe_export): New method.
* unittests/gmp-utils-selftests .c (gdb_mpz_as_integer):
Update function description.
(check_as_integer_raises_out_of_range_error): New function.
(gdb_mpz_as_integer_out_of_range): New function.
(_initialize_gmp_utils_selftests): Register
gdb_mpz_as_integer_out_of_range as a selftest.
|
|
This commit changes the interfaces of some of the methods declared
in gmp-utils to take a gdb::array_view of gdb_byte instead of a
(gdb_byte *, size) couple.
This makes these methods' API probably more C++-idiomatic.
* gmp-utils.h (gdb_mpz::read): Change buf and len parameters
into one single gdb::array_view parameter.
(gdb_mpz::write): Likewise.
(gdb_mpq::read_fixed_point, gdb_mpq::write_fixed_point): Likewise.
* gmp-utils.c (gdb_mpz::read): Change buf and len parameters
into one single gdb::array_view parameter.
Adjust implementation accordingly.
(gdb_mpz::write): Likewise.
(gdb_mpq::read_fixed_point, gdb_mpq::write_fixed_point): Likewise.
* unittests/gmp-utils-selftests.c: Adapt following changes above.
* valarith.c, valops.c, valprint.c, value.c: Likewise.
|
|
This was suggested by Simon during a code review of this package upstream.
The upside is that this makes the function's API more natural and C++.
The downside is an extra malloc, which might be the reason why we went
for using a unique_xmalloc_ptr in the first place. Since this function
is not expected to be called frequently, the API improvement might be
worth the performance impact.
gdb/ChangeLog:
* gmp-utils.h (gmp_string_printf): Rename from gmp_string_asprintf.
Change return type to std::string. Update all callers.
* gmp-utils.c (gmp_string_printf): Likewise.
|
|
This API was motivated by a number of reasons:
- GMP's API does not handle "long long" and "unsigned long long",
so using LONGEST and ULONGEST is not straightforward;
- Automate the need to initialize GMP objects before use, and
clear them when no longer used.
However, this API grew also to help with similar matter such
as formatting to a string, and also reading/writing fixed-point
values from byte buffers.
Dedicated unit testing is also added.
gdb/ChangeLog:
* gmp-utils.h, gmp-utils.h: New file.
* unittests/gmp-utils-selftests.c: New file.
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/gmp-utils-selftests.c.
(COMMON_SFILES) Add gmp-utils.c.
(HFILES_NO_SRCDIR): Add gmp-utils.h.
|
