aboutsummaryrefslogtreecommitdiff
path: root/gas/as.h
AgeCommit message (Collapse)AuthorFilesLines
2022-12-13gas: re-work line number tracking for macros and their expansionsJan Beulich1-0/+11
The PR gas/16908 workaround aimed at uniformly reporting line numbers to reference macro invocation sites. As mentioned in a comment this may be desirable for small macros, but often isn't for larger ones. As a first step improve diagnostics to report both locations, while aiming at leaving generated debug info unaltered. Note that macro invocation context is lost for any diagnostics issued only after all input was processed (or more generally for any use of as_*_where(), as the functions can't know whether the passed in location is related to [part of] the present stack of locations). To maintain the intended workaround behavior for PR gas/16908, a new as_where() is introduced to "look through" macro invocations, while the existing as_where() is renamed (and used in only very few places for now). Down the road as_where() will likely want to return a list of (file,line) pairs.
2022-11-23gas: Add --gcodeview optionMark Harmstone1-1/+2
2022-11-15gas: generate .sframe from CFI directivesIndu Bhagat1-1/+9
Currently supported for x86_64 and aarch64 only. [PS: Currently, the compiler has not been adapted to generate ".cfi_sections" with ".sframe" in it. The newly added command line option of --gsframe provides an easy way to try out .sframe support in the toolchain.] gas interprets the CFI directives to generate DWARF-based .eh_frame info. These internal DWARF structures are now consumed by gen-sframe.[ch] sub-system to, in turn, create the SFrame unwind information. These internal DWARF structures are read-only for the purpose of SFrame unwind info generation. SFrame unwind info generation does not impact .eh_frame unwind info generation. Both .eh_frame and .sframe can co-exist in an ELF file, if so desired by the user. Recall that SFrame unwind information only contains the minimal necessary information to generate backtraces and does not provide information to recover all callee-saved registers. The reason being that callee-saved registers other than FP are not needed for stack unwinding, and hence are not included in the .sframe section. Consequently, gen-sframe.[ch] only needs to interpret a subset of DWARF opcodes in gas. More details follow. [Set 1, Interpreted] The following opcodes are interpreted: - DW_CFA_advance_loc - DW_CFA_def_cfa - DW_CFA_def_cfa_register - DW_CFA_def_cfa_offset - DW_CFA_offset - DW_CFA_remember_state - DW_CFA_restore_state - DW_CFA_restore [Set 2, Bypassed] The following opcodes are acknowledged but are not necessary for generating SFrame unwind info: - DW_CFA_undefined - DW_CFA_same_value Anything else apart from the two above-mentioned sets is skipped altogether. This means that any function containing a CFI directive not in Set 1 or Set 2 above, will not have any SFrame unwind information generated for them. Holes in instructions covered by FREs of a single FDE are not representable in the SFrame unwind format. As few examples, following opcodes are not processed for .sframe generation, and are skipped: - .cfi_personality* - .cfi_*lsda - .cfi_escape - .cfi_negate_ra_state - ... Not processing .cfi_escape, .cfi_negate_ra_state will cause SFrame unwind information to be absent for SFrame FDEs that contain these CFI directives, hence affecting the asynchronicity. x86-64 and aarch64 backends need to have a few new definitions and functions for .sframe generation. These provide gas with architecture specific information like the SP/FP/RA register numbers and an SFrame-specific ABI marker. Lastly, the patch also implements an optimization for size, where specific fragments containing SFrame FRE start address and SFrame FDE function are fixed up. This is similar to other similar optimizations in gas, where fragments are sized and fixed up when the associated symbols can be resolved. This optimization is controlled by a #define SFRAME_FRE_TYPE_SELECTION_OPT and should be easy to turn off if needed. The optimization is on by default for both x86_64 and aarch64. ChangeLog: * gas/Makefile.am: Include gen-sframe.c and sframe-opt.c. * gas/Makefile.in: Regenerated. * gas/as.h (enum _relax_state): Add new state rs_sframe. (sframe_estimate_size_before_relax): New function. (sframe_relax_frag): Likewise. (sframe_convert_frag): Likewise. * gas/config/tc-aarch64.c (aarch64_support_sframe_p): New definition. (aarch64_sframe_ra_tracking_p): Likewise. (aarch64_sframe_cfa_ra_offset): Likewise. (aarch64_sframe_get_abi_arch): Likewise. (md_begin): Set values of sp/fp/ra registers. * gas/config/tc-aarch64.h (aarch64_support_sframe_p): New declaration. (support_sframe_p): Likewise. (SFRAME_CFA_SP_REG): Likewise. (SFRAME_CFA_FP_REG): Likewise. (SFRAME_CFA_RA_REG): Likewise. (aarch64_sframe_ra_tracking_p): Likewise. (sframe_ra_tracking_p): Likewise. (aarch64_sframe_cfa_ra_offset): Likewise. (sframe_cfa_ra_offset): Likewise. (aarch64_sframe_get_abi_arch): Likewise. (sframe_get_abi_arch): Likewise. * gas/config/tc-i386.c (x86_support_sframe_p): New definition. (x86_sframe_ra_tracking_p): Likewise. (x86_sframe_cfa_ra_offset): Likewise. (x86_sframe_get_abi_arch): Likewise. * gas/config/tc-i386.h (x86_support_sframe_p): New declaration. (support_sframe_p): Likewise. (SFRAME_CFA_SP_REG): Likewise. (SFRAME_CFA_FP_REG): Likewise. (x86_sframe_ra_tracking_p): Likewise. (sframe_ra_tracking_p): Likewise. (x86_sframe_cfa_ra_offset): Likewise. (sframe_cfa_ra_offset): Likewise. (x86_sframe_get_abi_arch): Likewise. (sframe_get_abi_arch): Likewise. * gas/config/tc-xtensa.c (unrelaxed_frag_max_size): Add case for rs_sframe. * gas/doc/as.texi: Add .sframe to the documentation for .cfi_sections. * gas/dw2gencfi.c (cfi_finish): Create a .sframe section. * gas/dw2gencfi.h (CFI_EMIT_sframe): New definition. * gas/write.c (cvt_frag_to_fill): Handle rs_sframe. (relax_segment): Likewise. * gas/gen-sframe.c: New file. * gas/gen-sframe.h: New file. * gas/sframe-opt.c: New file.
2022-11-15gas: add new command line option --gsframeIndu Bhagat1-0/+3
When --gsframe is specified, the assembler will generate a .sframe section from the CFI directives in the assembly. ChangeLog: * gas/as.c (parse_args): Parse args and set flag_gen_sframe. * gas/as.h: Introduce skeleton for --gsframe. * gas/doc/as.texi: document --gsframe.
2022-08-11PR29466, APP/NO_APP with .linefileAlan Modra1-0/+1
Commit 53f2b36a54b9 exposed a bug in sb_scrub_and_add_sb that could result in losing input. If scrubbing results in expansion past the holding capacity of do_scrub_chars output buffer, then do_scrub_chars stashes the extra input for the next call. That call never came because sb_scrub_and_add_sb wrongly decided it was done. Fix that by allowing sb_scrub_and_add_sb to see whether there is pending input. Also allow a little extra space so that in most cases we won't need to resize the output buffer. sb_scrub_and_add_sb also limited output to the size of the input, rather than the actual output buffer size. Fixing that resulted in a fail of gas/testsuite/macros/dot with an extra warning: "end of file not at end of a line; newline inserted". OK, so the macro in dot.s really does finish without end-of-line. Apparently the macro expansion code relied on do_scrub_chars returning early. So fix that too by adding a newline if needed in macro_expand_body. PR 29466 * app.c (do_scrub_pending): New function. * as.h: Declare it. * input-scrub.c (input_scrub_include_sb): Add extra space for two .linefile directives. * sb.c (sb_scrub_and_add_sb): Take into account pending input. Allow output to max. * macro.c (macro_expand_body): Add terminating newline. * testsuite/config/default.exp (SIZE, SIZEFLAGS): Define. * testsuite/gas/macros/app5.d, * testsuite/gas/macros/app5.s: New test. * testsuite/gas/macros/macros.exp: Run it.
2022-07-09gas: use notes_calloc in string hashAlan Modra1-2/+2
Using notes_calloc means all of the string hash table memory should now be freed before gas exits, even though htab_delete isn't called. This also means that the hash table free_f and del_f must be NULL, because freeing notes obstack memory results in all more recently allocated notes memory being freed too. So hash table resizing won't free any memory, and will be a little faster. Also, htab_delete won't do anything (and be quick about it). Since htab_traverse can also resize hash tables (to make another traversal faster if the table is largely empty), stop that happening when only one traversal is done. * as.h: Reorder hash.h after symbols.h for notes_calloc decl. * hash.h (str_htab_create): Use notes_calloc. Do not free. * symbols.c (resolve_local_symbol_values): Don't resize during hash table traversal. * config/obj-elf.c (elf_frob_file_after_relocs): Likewise. * config/tc-ia64.c (ia64_adjust_symtab, ia64_frob_file): Likewise. * config/tc-nds32.c (nds32_elf_analysis_relax_hint): Likewise.
2022-07-09gas: output_file_closeAlan Modra1-0/+3
This is mostly a tidy with the aim of being able to free out_file_name, but it does fix a possible attempt to unlink the output file twice (not that that matters). * as.h (keep_it): New global. * as.c (keep_it): Delete. (close_output_file): Delete, merged into.. * output-file.c (output_file_close): ..here. Delete parameter. * output-file.h (output_file_close): Update prototype.
2022-07-09gas: utility notes memory alloc functionsAlan Modra1-0/+8
Makes it a little easier to use the notes obstack for persistent storage. * as.h (gas_mul_overflow): Define. * symbols.h (notes_alloc, notes_calloc, notes_memdup), (notes_strdup, notes_concat, notes_free): Declare. * symbols.c (notes_alloc, notes_calloc, notes_memdup), (notes_strdup, notes_concat, notes_free): New functions. (save_symbol_name): Use notes_strdup. (symbol_create, local_symbol_make, local_symbol_convert), (symbol_clone, decode_local_label_name): Use notes_alloc.
2022-07-07PR29320, 'struct obstack' declared inside parameter listAlan Modra1-0/+2
PR 29320 * frags.h: Move declaration of struct obstack.. * as.h: ..to here.
2022-07-04alloc gas seginfo on notes obstackAlan Modra1-0/+1
Lots of memory used in gas should go on this obstack. The patch also frees all the gas obstacks on exit, which isn't a completely trivial task. * subsegs.c (alloc_seginfo): New function. (subseg_change, subseg_get): Use it. (subsegs_end): New function. * as.h (subsegs_end): Declare. * output-file.c: Include subsegs.h (stash_frchain_obs): New function. (output_file_close): Save obstacks attached to output bfd before closing. Call subsegs_end with the array of obstacks.
2022-06-14gas dwarf2dbg.c tidyAlan Modra1-1/+1
Make it a little more obvious that remap_debug_filename returns an allocated string (that should be freed) by returning a char * rather than const char *. Free a few missed cases in dwarf2dbg.c, and free other memory allocated in dwarf2dbg.c. Also remove static initialisation of variables and initialise in dwarf2_init instead, in order to ensure gas state is saner for oss-fuzz. * remap.c (remap_debug_filename): Remove const from return. * as.h (remap_debug_filename): Update prototype. * config/obj-elf.c (obj_elf_ident): Simplify free of remap_debug_filename output. * stabs.c (stabs_generate_asm_file): Likewise. * dwarf2dbg.c (dirs, dirs_in_use, dirs_allocated, current): Don't initialise statically.. (dwarf2_init): ..do so here, along with most other static vars. (assign_file_to_slot): Don't set files_allocated until we succeed in allocating memory. (purge_generated_debug): Add bool param, free more stuff if true. (dwarf2_directive_filename): Adjust purge_generated_debug call. (process_entries): Don't free line_entry here.. (dwarf2_cleanup): ..do so here instead, new function. (dwarf2_finish): Call dwarf2_cleanup. When chaining together subseg line entries, unhook entries from old subseg list. (dwarf2_directive_loc): Free remap_debug_filename string. (out_dir_and_file_list): Likewise. (out_debug_str): Likewise.
2022-04-12gas: new_logical_line{,_flags}() can return "void"Jan Beulich1-2/+2
With the sole user of the return value gone, convert the return type to void. This in turn allows simplifying another construct, by moving it slightly later in the function.
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2021-11-18Add multibyte character warning option to the assembler.Nick Clifton1-0/+9
* as.c (parse_args): Add support for --multibyte-handling. * as.h (multibyte_handling): Declare. * app.c (scan_for_multibyte_characters): New function. (do_scrub_chars): Call the new function if multibyte warning is enabled. * input-scrub,c (input_scrub_next_buffer): Call the multibyte scanning function if multibyte warnings are enabled. * symbols.c (struct symbol_flags): Add multibyte_warned bit. (symbol_init): Call the multibyte scanning function if multibyte symbol warnings are enabled. (S_SET_SEGMENT): Likewise. * NEWS: Mention the new feature. * doc/as.texi: Document the new feature. * testsuite/gas/all/multibyte.s: New test source file. * testsuite/gas/all/multibyte1.d: New test driver file. * testsuite/gas/all/multibyte1.l: New test expected output. * testsuite/gas/all/multibyte2.d: New test driver file. * testsuite/gas/all/multibyte2.l: New test expected output. * testsuite/gas/all/gas.exp: Run the new tests.
2021-11-03asan: dlltool buffer overflow: embedded NUL in stringAlan Modra1-3/+1
yyleng gives the pattern length, xstrdup just copies up to the NUL. So it is quite possible writing at an index of yyleng-2 overflows the xstrdup allocated string buffer. xmemdup quite handily avoids this problem, even writing the terminating NUL over the trailing quote. Use it in ldlex.l too where we'd already had a report of this problem and fixed it by hand, and to implement xmemdup0 in gas. binutils/ * deflex.l (single and double quote strings): Use xmemdup. gas/ * as.h (xmemdup0): Use xmemdup. ld/ PR 20906 * ldlex.l (double quote string): Use xmemdup.
2021-04-19gas: drop sprint_value()Jan Beulich1-1/+0
Its (documented) behavior is unhelpful in particular in 64-bit build environments: While printing large 32-bit numbers in decimal already isn't very meaningful to most people, this even more so goes for yet larger 64-bit numbers. bfd_sprintf_vma() still tries to limit the number of digits printed (without depending on a build system property), but uniformly produces hex output.
2021-04-05C99 gas configuryAlan Modra1-46/+2
Also remove alloca stuff since we don't use alloca in gas nowadays. * configure.ac: Don't check for string.h, strings.h, stdlib.h, errno.h, limits.h, locale.h or time.h. Don't check for unlink, remove, sbrk (unused) or setlocale. Adjust gas_test_headers. Don't check for errno, free, malloc, realoc, sbrk, strstr, getenv strstr, or vsnprintf declarations. (AC_ISC_POSIX, AC_FUNC_ALLOCA, AC_C_INLINE): Don't invoke. * as.h: Don't include alloca-conf.h, include config.h instead. Include string.h, stdlib.h, errno.h unconditionally. Remove various fallback declarations. * asintl.h: Don't test HAVE_LOCALE_H. * as.c: Don't test HAVE_SETLOCALE. * dwarf2dbg.c: Include limits.h unconditionally. * expr.c: Likewise. * sb.c: Likewise. * symbols.c: Likewise. * config/tc-cr16.c: Likewise. * config/tc-d30v.c: Likewise. * config/tc-i386.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-tic54x.c (tic54x_mlib): Call remove rather than unlink. * config.in: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate.
2021-03-31Use bool in gasAlan Modra1-3/+5
* as.h (POISON_BFD_BOOLEAN): Define. * as.c, * as.h, * atof-generic.c, * config/atof-ieee.c, * config/bfin-aux.h, * config/obj-coff.c, * config/obj-ecoff.c, * config/obj-elf.c, * config/obj-elf.h, * config/obj-som.c, * config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c, * config/tc-arc.h, * config/tc-arm.c, * config/tc-arm.h, * config/tc-avr.c, * config/tc-avr.h, * config/tc-bfin.c, * config/tc-bfin.h, * config/tc-bpf.c, * config/tc-cris.c, * config/tc-csky.c, * config/tc-csky.h, * config/tc-d10v.c, * config/tc-d10v.h, * config/tc-d30v.c, * config/tc-d30v.h, * config/tc-dlx.c, * config/tc-dlx.h, * config/tc-epiphany.c, * config/tc-epiphany.h, * config/tc-fr30.c, * config/tc-fr30.h, * config/tc-frv.c, * config/tc-frv.h, * config/tc-ft32.c, * config/tc-ft32.h, * config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386-intel.c, * config/tc-i386.c, * config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c, * config/tc-iq2000.h, * config/tc-lm32.c, * config/tc-lm32.h, * config/tc-m32c.c, * config/tc-m32c.h, * config/tc-m32r.c, * config/tc-m32r.h, * config/tc-m68hc11.c, * config/tc-m68k.c, * config/tc-mcore.c, * config/tc-mcore.h, * config/tc-mep.c, * config/tc-mep.h, * config/tc-metag.c, * config/tc-metag.h, * config/tc-microblaze.c, * config/tc-mips.c, * config/tc-mips.h, * config/tc-mmix.c, * config/tc-mn10200.c, * config/tc-mn10300.c, * config/tc-mn10300.h, * config/tc-moxie.c, * config/tc-msp430.c, * config/tc-msp430.h, * config/tc-mt.c, * config/tc-mt.h, * config/tc-nds32.c, * config/tc-nds32.h, * config/tc-nios2.c, * config/tc-ns32k.c, * config/tc-or1k.c, * config/tc-or1k.h, * config/tc-pdp11.c, * config/tc-ppc.c, * config/tc-pru.c, * config/tc-pru.h, * config/tc-riscv.c, * config/tc-riscv.h, * config/tc-rx.c, * config/tc-rx.h, * config/tc-s12z.c, * config/tc-s12z.h, * config/tc-s390.c, * config/tc-score.c, * config/tc-score.h, * config/tc-score7.c, * config/tc-sh.c, * config/tc-sh.h, * config/tc-spu.c, * config/tc-tic54x.c, * config/tc-tic6x.c, * config/tc-tic6x.h, * config/tc-tilegx.c, * config/tc-tilepro.c, * config/tc-v850.c, * config/tc-v850.h, * config/tc-visium.c, * config/tc-visium.h, * config/tc-wasm32.c, * config/tc-wasm32.h, * config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c, * config/tc-xstormy16.h, * config/tc-xtensa.c, * config/tc-xtensa.h, * config/tc-z80.c, * config/tc-z8k.c, * config/xtensa-istack.h, * config/xtensa-relax.c, * config/xtensa-relax.h, * dw2gencfi.c, * dwarf2dbg.c, * dwarf2dbg.h, * expr.c, * expr.h, * frags.c, * frags.h, * listing.c, * macro.c, * output-file.c, * read.c, * read.h, * stabs.c, * symbols.c, * write.c: Replace bfd_boolean with bool, FALSE with false, and TRUE with true.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-08-20gas/hash.c: add new functionsMartin Liska1-0/+1
The first of a patch series deleting the gas/hash.c hash table implementation and instead using libiberty/hashtab.c hash tables in gas. * as.h: Include hashtab.h. * hash.c (htab_insert): New. (htab_print_statistics): Likewise. * hash.h (htab_insert): Likewise. (htab_print_statistics): Likewise.
2020-03-06Add support for --dwarf-[3|4|5] to assembler command line.Nick Clifton1-0/+1
PR 25612 * as.c (dwarf_level): Define. (show_usage): Add --gdwarf-3, --gdwarf-4 and --gdwarf-5. (parse_args): Add support for the new options. as.h (dwarf_level): Prototype. * dwarf2dbg.c (DWARF2_VERSION): Use dwarf_level as default version value. * config/tc-ia64.h (DWARF2_VERISION): Update definition. (DWARF2_LINE_VERSION): Remove definition. * doc/as.texi: Document the new options.
2020-01-03Allow individual targets to decide if string escapes should be allowed. ↵Sergey Belyashov1-0/+4
Disable for PPC and Z80. PR 25311 * as.h (TC_STRING_ESCAPES): Provide a default definition. * app.c (do_scrub_chars): Use TC_STRING_ESCAPES instead of NO_STRING_ESCAPES. * read.c (next_char_of_string): Likewise. * config/tc-ppc.h (TC_STRING_ESCAPES): Define. * config/tc-z80.h (TC_STRING_ESCAPES): Define.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-11-25Introduce new section flag: SEC_ELF_OCTETSChristian Eggers1-0/+7
All symbols, sizes and relocations in this section are octets instead of bytes. Required for DWARF debug sections as DWARF information is organized in octets, not bytes. bfd/ * section.c (struct bfd_section): New flag SEC_ELF_OCTETS. * archures.c (bfd_octets_per_byte): New parameter sec. If section is not NULL and SEC_ELF_OCTETS is set, one octet es returned [ELF targets only]. * bfd.c (bfd_get_section_limit): Provide section parameter to bfd_octets_per_byte. * bfd-in2.h: regenerate. * binary.c (binary_set_section_contents): Move call to bfd_octets_per_byte into section loop. Provide section parameter to bfd_octets_per_byte. * coff-arm.c (coff_arm_reloc): Provide section parameter to bfd_octets_per_byte. * coff-i386.c (coff_i386_reloc): likewise. * coff-mips.c (mips_reflo_reloc): likewise. * coff-x86_64.c (coff_amd64_reloc): likewise. * cofflink.c (_bfd_coff_link_input_bfd): likewise. (_bfd_coff_reloc_link_order): likewise. * elf.c (_bfd_elf_section_offset): likewise. (_bfd_elf_make_section_from_shdr): likewise. Set SEC_ELF_OCTETS for sections with names .gnu.build.attributes, .debug*, .zdebug* and .note.gnu*. * elf32-msp430.c (rl78_sym_diff_handler): Provide section parameter to bfd_octets_per_byte. * elf32-nds.c (nds32_elf_get_relocated_section_contents): likewise. * elf32-ppc.c (ppc_elf_addr16_ha_reloc): likewise. * elf32-pru.c (pru_elf32_do_ldi32_relocate): likewise. * elf32-s12z.c (opru18_reloc): likewise. * elf32-sh.c (sh_elf_reloc): likewise. * elf32-spu.c (spu_elf_rel9): likewise. * elf32-xtensa.c (bfd_elf_xtensa_reloc): likewise * elf64-ppc.c (ppc64_elf_brtaken_reloc): likewise. (ppc64_elf_addr16_ha_reloc): likewise. (ppc64_elf_toc64_reloc): likewise. * elflink.c (bfd_elf_final_link): likewise. (bfd_elf_perform_complex_relocation): likewise. (elf_fixup_link_order): likewise. (elf_link_input_bfd): likewise. (elf_link_sort_relocs): likewise. (elf_reloc_link_order): likewise. (resolve_section): likewise. * linker.c (_bfd_generic_reloc_link_order): likewise. (bfd_generic_define_common_symbol): likewise. (default_data_link_order): likewise. (default_indirect_link_order): likewise. * srec.c (srec_set_section_contents): likewise. (srec_write_section): likewise. * syms.c (_bfd_stab_section_find_nearest_line): likewise. * reloc.c (_bfd_final_link_relocate): likewise. (bfd_generic_get_relocated_section_contents): likewise. (bfd_install_relocation): likewise. For section which have SEC_ELF_OCTETS set, multiply output_base and output_offset with bfd_octets_per_byte. (bfd_perform_relocation): likewise. include/ * coff/ti.h (GET_SCNHDR_SIZE, PUT_SCNHDR_SIZE, GET_SCN_SCNLEN), (PUT_SCN_SCNLEN): Adjust bfd_octets_per_byte calls. binutils/ * objdump.c (disassemble_data): Provide section parameter to bfd_octets_per_byte. (dump_section): likewise (dump_section_header): likewise. Show SEC_ELF_OCTETS flag if set. gas/ * as.h: Define SEC_OCTETS as SEC_ELF_OCTETS if OBJ_ELF. * dwarf2dbg.c: (dwarf2_finish): Set section flag SEC_OCTETS for .debug_line, .debug_info, .debug_abbrev, .debug_aranges, .debug_str and .debug_ranges sections. * write.c (maybe_generate_build_notes): Set section flag SEC_OCTETS for .gnu.build.attributes section. * frags.c (frag_now_fix): Don't divide by OCTETS_PER_BYTE if SEC_OCTETS is set. * symbols.c (resolve_symbol_value): Likewise. ld/ * ldexp.c (fold_name): Provide section parameter to bfd_octets_per_byte. * ldlang (init_opb): New argument s. Set opb_shift to 0 if SEC_ELF_OCTETS for the current section is set. (print_input_section): Pass current section to init_opb. (print_data_statement,print_reloc_statement, print_padding_statement): Likewise. (lang_check_section_addresses): Call init_opb for each section. (lang_size_sections_1,lang_size_sections_1, lang_do_assignments_1): Likewise. (lang_process): Pass NULL to init_opb.
2019-11-18gas: Add --gdwarf-cie-version command line flagAndrew Burgess1-0/+1
Add a flag to control the version of CIE that is generated. By default gas produces CIE version 1, and this continues to be the default after this patch. However, a user can now provide --gdwarf-cie-version=NUMBER to switch to either version 3 or version 4 of CIE, version 2 was never released, and so causes an error as does any number less than 1 or greater than 4. Producing version 4 CIE requires two new fields to be added to the CIE, an address size field, and an segment selector field. For a flat address space the DWARF specification indicates that the segment selector should be 0, and the address size fields just contains the address size in bytes. For now we support 4 or 8 byte addresses, and the segment selector is always produced as 0. At some future time we might need to allow targets to override this. gas/ChangeLog: * as.c (parse_args): Parse --gdwarf-cie-version option. (flag_dwarf_cie_version): New variable. * as.h (flag_dwarf_cie_version): Declare. * dw2gencfi.c (output_cie): Switch from DW_CIE_VERSION to flag_dwarf_cie_version. * doc/as.texi (Overview): Document --gdwarf-cie-version. * NEWS: Likewise. * testsuite/gas/cfi/cfi.exp: Add new tests. * testsuite/gas/cfi/cie-version-0.d: New file. * testsuite/gas/cfi/cie-version-1.d: New file. * testsuite/gas/cfi/cie-version-2.d: New file. * testsuite/gas/cfi/cie-version-3.d: New file. * testsuite/gas/cfi/cie-version-4.d: New file. * testsuite/gas/cfi/cie-version.s: New file. include/ChangeLog: * dwarf2.h (DW_CIE_VERSION): Delete. Change-Id: I9de19461aeb8332b5a57bbfe802953d0725a7ae8
2019-11-07[Patch][binutils] Generic support for parsing numbers in bfloat16 format [5/X]Matthew Malcomson1-0/+1
Hi, This patch is part of a series that adds support for Armv8.6-A (Matrix Multiply and BFloat16 extensions). This patch contains some general refactoring of the atof_ieee function, exposing a function that allows a higher level of control over the format of IEEE-like floating point numbers. This has been done in order to be able to add a directive for assembling floating point literals in the bfloat16 format in the following patches. Committed on behalf of Mihail Ionescu. Tested on arm-none-eabi, arm-none-linux-gnueabihf, aarch64-none-elf and aarch64-none-linux-gnuwith no issues. gas/ChangeLog: 2019-10-21 Mihail Ionescu <mihail.ionescu@arm.com> 2019-10-21 Barnaby Wilks <barnaby.wilks@arm.com> * as.h (atof_ieee_detail): Add prototype for atof_ieee_detail function. (atof_ieee): Move some code into the atof_ieee_detail function. (atof_ieee_detail): Add function that provides a higher level of control over generating IEEE-like numbers. Is it ok for trunk? Regards, Mihail
2019-09-19bfd_section_* macrosAlan Modra1-1/+1
This large patch removes the unnecessary bfd parameter from various bfd section macros and functions. The bfd is hardly ever used and if needed for the bfd_set_section_* or bfd_rename_section functions can be found via section->owner except for the com, und, abs, and ind std_section special sections. Those sections shouldn't be modified anyway. The patch also removes various bfd_get_section_<field> macros, replacing their use with bfd_section_<field>, and adds bfd_set_section_lma. I've also fixed a minor bug in gas where compressed section renaming was done directly rather than calling bfd_rename_section. This would have broken bfd_get_section_by_name and similar functions, but that hardly mattered at such a late stage in gas processing. bfd/ * bfd-in.h (bfd_get_section_name, bfd_get_section_vma), (bfd_get_section_lma, bfd_get_section_alignment), (bfd_get_section_size, bfd_get_section_flags), (bfd_get_section_userdata): Delete. (bfd_section_name, bfd_section_size, bfd_section_vma), (bfd_section_lma, bfd_section_alignment): Lose bfd parameter. (bfd_section_flags, bfd_section_userdata): New. (bfd_is_com_section): Rename parameter. * section.c (bfd_set_section_userdata, bfd_set_section_vma), (bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section), (bfd_set_section_size): Delete bfd parameter, rename section parameter. (bfd_set_section_lma): New. * bfd-in2.h: Regenerate. * mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param, update callers. * aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h, * elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c, * elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c, * elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c, * elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c, * mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c, * peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c, * xcofflink.c: Update throughout for bfd section macro and function changes. binutils/ * addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c, * objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c, * od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c, * resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update throughout for bfd section macro and function changes. gas/ * as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c, * read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c, * config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c, * config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c, * config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c, * config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c, * config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c, * config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c, * config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c, * config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c, * config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c, * config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c, * config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c, * config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c, * config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c, * config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c, * config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c, * config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c, * config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c, * config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c, * config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c, * config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c, * config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for bfd section macro and function changes. * write.c (compress_debug): Use bfd_rename_section. gdb/ * aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c, * coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c, * dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c, * exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h, * hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c, * i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c, * maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c, * mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c, * objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c, * ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c, * rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c, * s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c, * solib-spu.c, * solib-svr4.c, * solib-target.c, * spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c, * symmisc.c, * symtab.c, * target.c, * windows-nat.c, * xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c, * mi/mi-interp.c: Update throughout for bfd section macro and function changes. * gcore (gcore_create_callback): Use bfd_set_section_lma. * spu-tdep.c (spu_overlay_new_objfile): Likewise. gprof/ * corefile.c, * symtab.c: Update throughout for bfd section macro and function changes. ld/ * ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c, * emultempl/aarch64elf.em, * emultempl/aix.em, * emultempl/armcoff.em, * emultempl/armelf.em, * emultempl/cr16elf.em, * emultempl/cskyelf.em, * emultempl/m68hc1xelf.em, * emultempl/m68kelf.em, * emultempl/mipself.em, * emultempl/mmix-elfnmmo.em, * emultempl/mmo.em, * emultempl/msp430.em, * emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em, * emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update throughout for bfd section macro and function changes. libctf/ * ctf-open-bfd.c: Update throughout for bfd section macro changes. opcodes/ * arc-ext.c: Update throughout for bfd section macro changes. sim/ * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c, * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c, * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c, * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c, * rx/trace.c: Update throughout for bfd section macro changes.
2019-05-14A series of fixes to addres problems detected by compiling the assembler ↵Nick Clifton1-0/+4
with address sanitization enabled. PR 24538 gas * macro.c (get_any_string): Increase size of buffer used to hold decimal value of expression result. * dw2gencfi.c (get_debugseg_name): Handle an empty name. * dwarf2dbg.c (get_filenum): Catch integer wraparound when extending allocate file array. (dwarf2_directive_filename): Add extra checks of the computed file number. * config/tc-arm.c (arm_tc_equal_in_insn): Insert copy of name into warning hash table. (s_arm_eabi_attribute): Check for obj_elf_vendor_attribute returning -1. * config/tc-i386.c (i386_output_nops): Catch an attempt to generate nops of negative lengths. * as.h (MAX_LITTLENUMS): Move definition to here from... * config/atof-ieee.c: ...here. * config/tc-aarch64.c: ...here. * config/tc-arc.c: ...here. * config/tc-arm.c: ...here. * config/tc-epiphany.c: ...here. * config/tc-i386.c: ...here. * config/tc-ia64.c: ...here. (And correct the value). * config/tc-m32c.c: ...here. * config/tc-m32r.c: ...here. * config/tc-metag.c: ...here. * config/tc-microblaze.c: ...here. * config/tc-nds32.c: ...here. * config/tc-or1k.c: ...here. * config/tc-score.c: ...here. * config/tc-score7.c: ...here. * config/tc-tic4x.c: ...here. * config/tc-tilegx.c: ...here. * config/tc-tilepro.c: ...here. * config/tc-visium.c: ...here. * config/tc-sh.c (md_assemble): Add check for an instruction with no opcodes. * config/tc-mips.c (mips_lookup_insn): Add check for very short instruction name. * config/tc-tic54x.c: Use unsigned chars to access is_end_of_line array. (tic54x_start_line_hook): Check for an empty line. (next_line_shows_parallel): Do not walk off the end of the string. (tic54x_macro_start): Check for too much macro nesting. (tic54x_start_label): Add label_start parameter. Use this parameter to check the first character of the label. * config/tc-tic54x.h (TC_START_LABEL_WITHOUT_COLON): Pass line_start variable to tic54x_start_label. PR 24538 opcodes * ia64-opc.c (ia64_find_matching_opcode): Check for reaching the end of the table prematurely.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-04-26Extend the assembler so that it can automatically generate GNU Build ↵Nick Clifton1-0/+4
attribute notes if none are present in the input files. gas * as.c (flag_generate_build_notes): New variable. (show_usage): Add entry for --generate-missing-build-notes. (parse_args): Parse --generate-missing-build-notes. * as.h: Export flag_generate_build_notes. * symbols.c (save_symbol_name): Ensure that the name parameter is not NULL. * write.c (create_obj_attrs_section): Reformat. (create_note_reloc): New function - creates a relocation for a field in a GNU Build attribute note. (maybe_generate_build_notes): New function - created GNU Build attribute notes if none are present in the output file. (write_object_file): Call maybe_generate_build_notes. * configure.ac (--enable-generate-build-notes): New option. * NEWS: Announce the new feature. * doc/as.textinfo: Document the new option. * config.in: Regenerate. * configure: Regenerate. binutils* readelf.c (is_32bit_abs_reloc): Support R_PARISC_DIR32 as a 32-bit absolute reloc for the HPPA target. * testsuite/binutils-all/note-5.d: New test. * testsuite/binutils-all/note-5.s: Source file for new test. * testsuite/binutils-all/objcopy.exp: Run new test.
2018-02-17Add .nop assembler directiveH.J. Lu1-0/+10
Implement the '.nop SIZE[, CONTROL]' assembler directive, which emits SIZE bytes filled with no-op instructions. SIZE is absolute expression. The optional CONTROL byte controls how no-op instructions should be generated. If the comma and @var{control} are omitted, CONTROL is assumed to be zero. For Intel 80386 and AMD x86-64 targets, CONTROL byte specifies the size limit of a single no-op instruction. The valid values of CONTROL byte are between 0 and 8 for 16-bit mode, between 0 and 10 for 32-bit mode, between 0 and 11 for 64-bit mode. When 0 is used, the no-op size limit is set to the maximum supported size. 2 new relax states, rs_space_nop and rs_fill_nop, are added to enum _relax_state, which are similar to rs_space and rs_fill, respectively, but they fill with no-op instructions, instead of a single byte. A target backend must override the default md_generate_nops to generate proper no-op instructions. Otherwise, an error of unimplemented .nop directive will be issued whenever .nop directive is used. * NEWS: Mention .nop directive. * as.h (_relax_state): Add rs_space_nop and rs_fill_nop. * read.c (potable): Add .nop. (s_nop): New function. * read.h (s_nop): New prototype. * write.c (cvt_frag_to_fill): Handle rs_space_nop and rs_fill_nop. (md_generate_nops): New function. (relax_segment): Likewise. (write_contents): Use md_generate_nops for rs_fill_nop. * config/tc-i386.c (alt64_11): New. (alt64_patt): Likewise. (md_convert_frag): Handle rs_space_nop. (i386_output_nops): New function. (i386_generate_nops): Likewise. (i386_align_code): Call i386_output_nops. * config/tc-i386.h (i386_generate_nops): New. (md_generate_nops): Likewise. * doc/as.texinfo: Document .nop directive. * testsuite/gas/i386/i386.exp: Run .nop directive tests. * testsuite/gas/i386/nop-1.d: New file. * testsuite/gas/i386/nop-1.s: Likewise. * testsuite/gas/i386/nop-2.d: Likewise. * testsuite/gas/i386/nop-2.s: Likewise. * testsuite/gas/i386/nop-3.d: Likewise. * testsuite/gas/i386/nop-3.s: Likewise. * testsuite/gas/i386/nop-4.d: Likewise. * testsuite/gas/i386/nop-4.s: Likewise. * testsuite/gas/i386/nop-5.d: Likewise. * testsuite/gas/i386/nop-5.s: Likewise. * testsuite/gas/i386/nop-6.d: Likewise. * testsuite/gas/i386/nop-6.s: Likewise. * testsuite/gas/i386/nop-bad-1.l: Likewise. * testsuite/gas/i386/nop-bad-1.s: Likewise. * testsuite/gas/i386/x86-64-nop-1.d: Likewise. * testsuite/gas/i386/x86-64-nop-2.d: Likewise. * testsuite/gas/i386/x86-64-nop-3.d: Likewise. * testsuite/gas/i386/x86-64-nop-4.d: Likewise. * testsuite/gas/i386/x86-64-nop-5.d: Likewise. * testsuite/gas/i386/x86-64-nop-6.d: Likewise.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-10-11Disable the inclusion of logical input files in the assembler listing output ↵Nick Clifton1-0/+1
unless high level source listing has been enabled. PR 21977 * listing.c (listing_newline): Use the name of the current physical input file, rather than the current logical input file, unless including high level source in the listing. * input-scrub.c (as_where_physical): New function. Returns the name of the current physical input file. * as.h: Add prototype for as_where_physical.
2017-01-18Catch gas exit-via-signalNathan Sidwell1-3/+2
gas/ * as.h (gas_assert): Use abort. (as_assert): Remove. (signal_init): Declare. * as.c (main): Call signal_init. * messages.c: #include <signal.h> (as_assert): Delete. (as_abort): Allow NULL FILE. (signal_crash): New. (signal_init): Register fatal signal handlers. * configure.ac: Check for strsignal. * config.in: Rebuilt. * configure: Rebuilt.
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-11-27Fix spelling in comments in C source files (gas)Ambrogino Modigliani1-1/+1
* as.h: Fix spelling in comments. * config/obj-ecoff.c: Fix spelling in comments. * config/obj-macho.c: Fix spelling in comments. * config/tc-aarch64.c: Fix spelling in comments. * config/tc-arc.c: Fix spelling in comments. * config/tc-arm.c: Fix spelling in comments. * config/tc-avr.c: Fix spelling in comments. * config/tc-cr16.c: Fix spelling in comments. * config/tc-epiphany.c: Fix spelling in comments. * config/tc-frv.c: Fix spelling in comments. * config/tc-hppa.c: Fix spelling in comments. * config/tc-hppa.h: Fix spelling in comments. * config/tc-i370.c: Fix spelling in comments. * config/tc-m68hc11.c: Fix spelling in comments. * config/tc-m68k.c: Fix spelling in comments. * config/tc-mcore.c: Fix spelling in comments. * config/tc-mep.c: Fix spelling in comments. * config/tc-metag.c: Fix spelling in comments. * config/tc-mips.c: Fix spelling in comments. * config/tc-mn10200.c: Fix spelling in comments. * config/tc-mn10300.c: Fix spelling in comments. * config/tc-nds32.c: Fix spelling in comments. * config/tc-nios2.c: Fix spelling in comments. * config/tc-ns32k.c: Fix spelling in comments. * config/tc-pdp11.c: Fix spelling in comments. * config/tc-ppc.c: Fix spelling in comments. * config/tc-riscv.c: Fix spelling in comments. * config/tc-rx.c: Fix spelling in comments. * config/tc-score.c: Fix spelling in comments. * config/tc-score7.c: Fix spelling in comments. * config/tc-sparc.c: Fix spelling in comments. * config/tc-tic54x.c: Fix spelling in comments. * config/tc-vax.c: Fix spelling in comments. * config/tc-xgate.h: Fix spelling in comments. * config/tc-xtensa.c: Fix spelling in comments. * config/tc-z80.c: Fix spelling in comments. * dwarf2dbg.c: Fix spelling in comments. * input-file.h: Fix spelling in comments. * itbl-ops.c: Fix spelling in comments. * read.c: Fix spelling in comments. * stabs.c: Fix spelling in comments. * symbols.c: Fix spelling in comments. * write.c: Fix spelling in comments. * testsuite/gas/all/itbl-test.c: Fix spelling in comments. * testsuite/gas/tic4x/opclasses.h: Fix spelling in comments.
2016-10-06-Wimplicit-fallthrough noreturn fixesAlan Modra1-1/+1
binutils/ * cxxfilt.c (usage): Add ATTRIBUTE_NORETURN. * elfedit.c (usage): Likewise. * nm.c (usage): Likewise. * objcopy.c (copy_usage, strip_usage): Likewise. * srconv.c (show_usage): Likewise. * strings.c (usage): Likewise. * sysdump.c (show_usage): Likewise. * srconv.c: Remove unneeded forward function declarations. * strings.c: Likewise. * sysdump.c: Likewise. gas/ * as.h (as_assert): Add ATTRIBUTE_NORETURN.
2016-06-27Add command line option to stop the assembler from padding the end of ↵Nick Clifton1-2/+4
sections to their alignment boundary. PR gas/20247 * as.h (do_not_pad_sections_to_alignment): New global variable. * as.c (show_usage): Add --no-pad-sections. (parse_args): Likewise. * write.c (size_seg): Skip padding the end of the section if requested from the command line. (SUB_SEGMENT_ALIGN): Likewise. * doc/as.texinfo: Document the new option. * NEWS: Mention the new feature. * testsuite/gas/elf/section11.s: New test. * testsuite/gas/elf/section11.d: New test driver. * testsuite/gas/elf/elf.exp: Run the new test.
2016-05-13use xstrdup, xmemdup0 and concat moreTrevor Saunders1-3/+3
gas/ChangeLog: 2016-05-13 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * config/obj-coff.c (obj_coff_def): Simplify string copying. (weak_name2altname): Likewise. (weak_uniquify): Likewise. (obj_coff_section): Likewise. (obj_coff_init_stab_section): Likewise. * config/obj-elf.c (obj_elf_section_name): Likewise. (obj_elf_init_stab_section): Likewise. * config/obj-evax.c (evax_shorten_name): Likewise. * config/obj-macho.c (obj_mach_o_make_or_get_sect): Likewise. * config/tc-aarch64.c (create_register_alias): Likewise. * config/tc-alpha.c (load_expression): Likewise. (s_alpha_file): Likewise. (s_alpha_section_name): Likewise. (tc_gen_reloc): Likewise. * config/tc-arc.c (md_assemble): Likewise. * config/tc-arm.c (create_neon_reg_alias): Likewise. (start_unwind_section): Likewise. * config/tc-hppa.c (pa_build_unwind_subspace): Likewise. (hppa_elf_mark_end_of_function): Likewise. * config/tc-nios2.c (nios2_modify_arg): Likewise. (nios2_negate_arg): Likewise. * config/tc-rx.c (rx_section): Likewise. * config/tc-sh64.c (sh64_consume_datalabel): Likewise. * config/tc-tic30.c (tic30_find_parallel_insn): Likewise. * config/tc-tic54x.c (tic54x_include): Likewise. (tic54x_macro_info): Likewise. (subsym_get_arg): Likewise. (subsym_substitute): Likewise. (tic54x_start_line_hook): Likewise. * config/tc-xtensa.c (xtensa_literal_prefix): Likewise. (xg_reverse_shift_count): Likewise. * config/xtensa-relax.c (enter_opname_n): Likewise. (split_string): Likewise. * dwarf2dbg.c (get_filenum): Likewise. (process_entries): Likewise. * expr.c (operand): Likewise. * itbl-ops.c (alloc_entry): Likewise. * listing.c (listing_message): Likewise. (listing_title): Likewise. * macro.c (check_macro): Likewise. * stabs.c (s_xstab): Likewise. * symbols.c (symbol_relc_make_expr): Likewise. * write.c (compress_debug): Likewise.
2016-04-27Provide xmemdup0Alan Modra1-15/+8
and some tidies in as.h * as.h (inline, __PTR_TO_INT, __INT_TO_PTR): Don't define. (xmemdup0): New inline function.
2016-04-01Constify moreAlan Modra1-4/+4
* cgen.c (weak_operand_overflow_check): Return const char*. * messages.c (as_internal_value_out_of_range): Formatting. (as_warn_value_out_of_range): Consify prefix param. (as_bad_value_out_of_range): Likewise. * read.c (s_errwarn): Constify msg.. (s_float_space, float_cons): ..and err. * as.h (as_warn_value_out_of_range, as_bad_value_out_of_range, ieee_md_atof, vax_md_atof): Update prototypes. * tc.h (md_atof): Update prototype. * config/atof-ieee.c (ieee_md_atof): Return const char*. * config/atof-vax.c (vax_md_atof): Likewise. * config/obj-elf.c (obj_elf_parse_section_letters): Constify bad_msg. * config/tc-aarch64.c (md_atof): Return const char*. * config/tc-alpha.c (s_alpha_section_name): Likewise. (s_alpha_comm): Constify sec_name. (section_name): Constify. (s_alpha_section): Consify name.. (alpha_elf_section_letter): ..and ptr_msg param.. (md_atof): ..and return. * config/tc-alpha.h (alpha_elf_section_letter): Update prototype. * config/tc-arc.c (md_atof): Return const char*. * config/tc-arm.c (md_atof): Likewise. * config/tc-avr.c (md_atof): Likewise. * config/tc-bfin.c (md_atof): Likewise. * config/tc-cr16.c (md_atof): Likewise. * config/tc-cris.c (md_atof): Likewise. * config/tc-crx.c (md_atof): Likewise. * config/tc-d10v.c (md_atof): Likewise. * config/tc-d30v.c (md_atof): Likewise. * config/tc-dlx.c (md_atof): Likewise. * config/tc-epiphany.c (md_atof): Likewise. * config/tc-fr30.c (md_atof): Likewise. * config/tc-frv.c (md_atof): Likewise. * config/tc-ft32.c (md_atof): Likewise. * config/tc-h8300.c (md_atof): Likewise. * config/tc-hppa.c (struct default_subspace_dict): Constify name. (struct default_space_dict): Likewise. (create_new_space): Constify name param. (create_new_subspace): Likewise. (is_defined_space, is_defined_subspace): Likewise. (pa_parse_space_stmt): Constify space_name param. (md_atof): Return const char*. (pa_spaces_begin): Constify name. * config/tc-i370.c (md_atof): Return const char*. * config/tc-i386.c (md_atof): Likewise. (x86_64_section_letter): Constify ptr_msg param. * config/tc-i386.h (x86_64_section_letter): Update prototype. * config/tc-i860.c (struct i860_it): Constify error. (md_atof): Return const char*. * config/tc-i960.c (md_atof): Likewise. * config/tc-ia64.c (md_atof): Likewise. (ia64_elf_section_letter): Constify ptr_msg param. * config/tc-ia64.h (ia64_elf_section_letter): Update prototype. * config/tc-ip2k.c (md_atof): Return const char*. * config/tc-iq2000.c (md_atof): Likewise. * config/tc-lm32.c (md_atof): Likewise. * config/tc-m32c.c (md_atof): Likewise. * config/tc-m32r.c (md_atof): Likewise. * config/tc-m68hc11.c (md_atof): Likewise. * config/tc-m68k.c (md_atof): Likewise. * config/tc-mcore.c (md_atof): Likewise. * config/tc-mep.c (md_atof): Likewise. (mep_elf_section_letter): Constify ptr_msg param. * config/tc-mep.h (mep_elf_section_letter): Update prototype. * config/tc-metag.c (md_atof): Return const char*. * config/tc-microblaze.c (md_atof): Likewise. * config/tc-microblaze.h (md_atof): Delete prototype. * config/tc-mips.c (mips_parse_argument_token): Constify err. (md_atof): Return const char*. * config/tc-mmix.c (md_atof): Likewise. * config/tc-mn10200.c (md_atof): Likewise. * config/tc-mn10300.c (md_atof): Likewise. * config/tc-moxie.c (md_atof): Likewise. * config/tc-msp430.c (md_atof): Likewise. * config/tc-mt.c (md_atof): Likewise. * config/tc-nds32.c (md_atof): Likewise. * config/tc-nios2.c (md_atof): Likewise. (nios2_elf_section_letter): Constify ptr_msg param. * config/tc-nios2.h (nios2_elf_section_letter): Update prototype. * config/tc-ns32k.c (md_atof): Return const char*. * config/tc-or1k.c (md_atof): Likewise. * config/tc-pdp11.c (struct pdp11_code): Constify error. (md_atof): Return const char*. * config/tc-pj.c (md_atof): Likewise. * config/tc-ppc.c (md_atof): Likewise. * config/tc-rl78.c (md_atof): Likewise. * config/tc-rx.c (md_atof): Likewise. * config/tc-s390.c (md_atof): Likewise. * config/tc-score.c (s3_atof, md_atof): Likewise. * config/tc-sh.c (md_atof): Likewise. * config/tc-sparc.c (struct sparc_it): Constify error. (md_atof): Return const char*. * config/tc-spu.c (md_atof): Likewise. * config/tc-tic30.c (md_atof): Likewise. * config/tc-tic4x.c (md_atof): Likewise. * config/tc-tic54x.c (md_atof): Likewise. * config/tc-tic6x.c (md_atof): Likewise. * config/tc-tilegx.c (md_atof): Likewise. * config/tc-tilepro.c (md_atof): Likewise. * config/tc-v850.c (parse_register_list, md_atof): Likewise. * config/tc-vax.c (md_atof): Likewise. * config/tc-visium.c (md_atof): Likewise. * config/tc-xc16x.c (md_atof): Likewise. * config/tc-xgate.c (md_atof): Likewise. * config/tc-xstormy16.c (md_atof): Likewise. * config/tc-xtensa.c (md_atof): Likewise. * config/tc-z80.c (md_atof): Likewise. * config/tc-z8k.c (md_atof): Likewise.
2016-03-25rename flag_size_check to flag_allow_nonconst_size and make it a boolTrevor Saunders1-6/+1
This name describes what the variable means slightly better, and the enum with two values that is only used for this one variable is kind of silly. gas/ChangeLog: 2016-03-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * as.c (parse_args): Adjust. * as.h (flag_size_check): Rename to flag_allow_nonconst_size. * config/obj-elf.c (elf_frob_symbol): Adjust.
2016-02-26Properly implement STT_COMMONH.J. Lu1-0/+3
The BFD configure option, --enable-elf-stt-common, can't be to used to verify STT_COMMON implementation with the normal binutils build. Instead, this patch removes it from BFD. It adds --elf-stt-common=[no|yes] to ELF assembler/objcopy and adds -z common/-z nocommon to ld. A configure option, --enable-elf-stt-common, is added to gas to specify whether ELF assembler should generate common symbols with the STT_COMMON type by default. Since BSF_KEEP_G is never used, it is renamed to BSF_ELF_COMMON for ELF common symbols. bfd/ PR ld/19645 * bfd.c (bfd): Change flags to 20 bits. (BFD_CONVERT_ELF_COMMON): New. (BFD_USE_ELF_STT_COMMON): Likewise. (BFD_FLAGS_SAVED): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise. * configure.ac: Remove --enable-elf-stt-common. * elf.c (swap_out_syms): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. * elfcode.h (elf_slurp_symbol_table): Set BSF_ELF_COMMON for STT_COMMON. * elflink.c (bfd_elf_link_mark_dynamic_symbol): Also check STT_COMMON. (elf_link_convert_common_type): New function. (elf_link_output_extsym): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. Set sym.st_info after sym.st_shndx. * elfxx-target.h (TARGET_BIG_SYM): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON to object_flags. (TARGET_LITTLE_SYM): Likewise. * syms.c (BSF_KEEP_G): Renamed to ... (BSF_ELF_COMMON): This. * bfd-in2.h: Regenerated. * config.in: Likewise. * configure: Likewise. binutils/ PR ld/19645 * NEWS: Mention --elf-stt-common= for objcopy. * doc/binutils.texi: Document --elf-stt-common= for objcopy. * objcopy.c (do_elf_stt_common): New. (command_line_switch): Add OPTION_ELF_STT_COMMON. (copy_options): Add --elf-stt-common=. (copy_usage): Add --elf-stt-common=. (copy_object): Also check do_elf_stt_common for ELF targets. (copy_file): Handle do_elf_stt_common. (copy_main): Handle OPTION_ELF_STT_COMMON. * readelf.c (apply_relocations): Support STT_COMMON. * testsuite/binutils-all/common-1.s: New file. * testsuite/binutils-all/common-1a.d: Likewise. * testsuite/binutils-all/common-1b.d: Likewise. * testsuite/binutils-all/common-1c.d: Likewise. * testsuite/binutils-all/common-1d.d: Likewise. * testsuite/binutils-all/common-1e.d: Likewise. * testsuite/binutils-all/common-1f.d: Likewise. * testsuite/binutils-all/common-2.s: Likewise. * testsuite/binutils-all/common-2a.d: Likewise. * testsuite/binutils-all/common-2b.d: Likewise. * testsuite/binutils-all/common-2c.d: Likewise. * testsuite/binutils-all/common-2d.d: Likewise. * testsuite/binutils-all/common-2e.d: Likewise. * testsuite/binutils-all/common-2f.d: Likewise. * testsuite/binutils-all/objcopy.exp (objcopy_test_elf_common_symbols): New proc. Run objcopy_test_elf_common_symbols for ELF targets gas/ PR ld/19645 * NEWS: Mention --enable-elf-stt-common and --elf-stt-common= for ELF assemblers. * as.c (flag_use_elf_stt_common): New. (show_usage): Add --elf-stt-common=. (option_values): Add OPTION_ELF_STT_COMMON. (std_longopts): Add --elf-stt-common=. (parse_args): Handle --elf-stt-common=. * as.h (flag_use_elf_stt_common): New. * config.in: Regenerated. * configure: Likewise. * configure.ac: Add --enable-elf-stt-common and define DEFAULT_GENERATE_ELF_STT_COMMON. * gas/write.c (write_object_file): Set BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON if flag_use_elf_stt_common is set. * doc/as.texinfo: Document --elf-stt-common=. * testsuite/gas/elf/common3.s: New file. * testsuite/gas/elf/common3a.d: Likewise. * testsuite/gas/elf/common3b.d: Likewise. * testsuite/gas/elf/common4.s: Likewise. * testsuite/gas/elf/common4a.d: Likewise. * testsuite/gas/elf/common4b.d: Likewise. * testsuite/gas/i386/dw2-compress-3b.d: Likewise. * testsuite/gas/i386/dw2-compressed-3b.d: Likewise. * testsuite/gas/elf/elf.exp: Run common3a, common3b, common4a and common4b. * testsuite/gas/i386/dw2-compress-3.d: Renamed to ... * testsuite/gas/i386/dw2-compress-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/dw2-compressed-3.d: Renamed to ... * testsuite/gas/i386/dw2-compressed-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/i386.exp: Run dw2-compress-3a, dw2-compress-3b, dw2-compressed-3a and dw2-compressed-3b instead of dw2-compress-3 and dw2-compressed-3. include/ PR ld/19645 * bfdlink.h (bfd_link_elf_stt_common): New enum. (bfd_link_info): Add elf_stt_common. ld/ PR ld/19645 * NEWS: Mention -z common/-z nocommon for ELF targets. * emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Handle -z common and -z nocommon. * ld.texinfo: Document -z common/-z nocommon. * lexsup.c (elf_shlib_list_options): Add -z common/-z nocommon. * testsuite/ld-elf/tls_common.exp: Test --elf-stt-common=no and --elf-stt-common=yes with assembler. * testsuite/ld-elfcomm/common-1.s: New file. * testsuite/ld-elfcomm/common-1a.d: Likewise. * testsuite/ld-elfcomm/common-1b.d: Likewise. * testsuite/ld-elfcomm/common-1c.d: Likewise. * testsuite/ld-elfcomm/common-1d.d: Likewise. * testsuite/ld-elfcomm/common-1e.d: Likewise. * testsuite/ld-elfcomm/common-1f.d: Likewise. * testsuite/ld-elfcomm/common-2.s: Likewise. * testsuite/ld-elfcomm/common-2a.d: Likewise. * testsuite/ld-elfcomm/common-2b.d: Likewise. * testsuite/ld-elfcomm/common-2c.d: Likewise. * testsuite/ld-elfcomm/common-2d.d: Likewise. * testsuite/ld-elfcomm/common-2e.d: Likewise. * testsuite/ld-elfcomm/common-2f.d: Likewise. * testsuite/ld-elfcomm/common-3a.rd: Likewise. * testsuite/ld-elfcomm/common-3b.rd: Likewise. * testsuite/ld-i386/pr19645.d: Likewise. * testsuite/ld-i386/pr19645.s: Likewise. * testsuite/ld-x86-64/largecomm-1.s: Likewise. * testsuite/ld-x86-64/largecomm-1a.d: Likewise. * testsuite/ld-x86-64/largecomm-1b.d: Likewise. * testsuite/ld-x86-64/largecomm-1c.d: Likewise. * testsuite/ld-x86-64/largecomm-1d.d: Likewise. * testsuite/ld-x86-64/largecomm-1e.d: Likewise. * testsuite/ld-x86-64/largecomm-1f.d: Likewise. * testsuite/ld-x86-64/pr19645.d: Likewise. * testsuite/ld-x86-64/pr19645.s: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Test --elf-stt-common=yes with assembler. (assembler_generates_commons): Removed. Run -z common/-z nocommon tests. Run *.d tests. * testsuite/ld-i386/i386.exp: Run pr19645. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/dwarfreloc.exp: Test --elf-stt-common with assembler. Test STT_COMMON with readelf.
2016-02-25Convert more variables to a constant form.Trevor Saunders1-1/+1
* as.c (select_emulation_mode): Add const qualifiers. * as.h: Likewise. * config/bfin-defs.h: Likewise. * config/bfin-parse.y: Likewise. * config/rx-parse.y: Likewise. * config/tc-aarch64.c (struct aarch64_option_table): Likewise. (struct aarch64_cpu_option_table): Likewise. (struct aarch64_arch_option_table): Likewise. (struct aarch64_option_cpu_value_table): Likewise. (struct aarch64_long_option_table): Likewise. (struct aarch64_option_abi_value_table): Likewise. * config/tc-arm.c (struct reloc_entry): Likewise. (tc_gen_reloc): Likewise. (struct arm_option_table): Likewise. (struct arm_legacy_option_table): Likewise. (struct arm_cpu_option_table): Likewise. (struct arm_arch_option_table): Likewise. (struct arm_option_extension_value_table): Likewise. (struct arm_option_fpu_value_table): Likewise. (struct arm_option_value_table): Likewise. (struct arm_long_option_table): Likewise. * config/tc-avr.c (struct avr_opcodes_s): Likewise. (struct mcu_type_s): Likewise. (struct exp_mod_s): Likewise. (avr_operand): Likewise. (avr_operands): Likewise. * config/tc-d10v.c (md_begin): Likewise. * config/tc-dlx.c: Likewise. * config/tc-fr30.c (fr30_is_colon_insn): Likewise. * config/tc-ft32.c (parse_condition): Likewise. * config/tc-h8300.c (do_a_fix_imm): Likewise. * config/tc-hppa.c (pa_ip): Likewise. (hppa_regname_to_dw2regnum): Likewise. * config/tc-i370.c (i370_elf_suffix): Likewise. * config/tc-i960.c (struct tabentry): Likewise. * config/tc-m32r.c: Likewise. * config/tc-m68k.c: Likewise. * config/tc-m68k.h: Likewise. * config/tc-mcore.c (parse_psrmod): Likewise. * config/tc-metag.c (struct metag_core_option): Likewise. (struct metag_long_option): Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mips.c (macro): Likewise. * config/tc-mn10200.c: Likewise. * config/tc-mn10300.c: Likewise. * config/tc-msp430.c (struct rcodes_s): Likewise. (struct hcodes_s): Likewise. (md_parse_option): Likewise. * config/tc-ns32k.c (struct ns32k_option): Likewise. (optlist): Likewise. * config/tc-ppc.c (ppc_elf_suffix): Likewise. (tc_ppc_regname_to_dw2regnum): Likewise. * config/tc-ppc.h: Likewise. * config/tc-rl78.c: Likewise. * config/tc-rx.c (struct cpu_type): Likewise. * config/tc-sh.c (sh_regname_to_dw2regnum): Likewise. * config/tc-sparc.c (struct priv_reg_entry): Likewise. (sparc_ip): Likewise. * config/tc-spu.c (insn_fmt_string): Likewise. * config/tc-tic54x.c (tic54x_set_default_include): Likewise. * config/tc-v850.c: Likewise. * config/tc-visium.c (struct visium_arch_option_table): Likewise. (struct visium_long_option_table): Likewise. * config/tc-xgate.c: Likewise. * config/tc-z8k.c: Likewise. * read.c (add_include_dir): Likewise. * read.h: Likewise.
2016-02-22Add more const type qualifiers to GAS sources.Trevor Saunders1-11/+13
* output-file.c (output_file_create): Make file name argument const. (output_file_close): Likewise. * output-file.h (output_file_create): Adjust. (output_file_close): Likewise. * depend.c (quote_string_for_make): Make src argument const char *. (register_dependency): Likewise. (wrap_output): Likewise. * as.h (register_dependency): Adjust. * config/tc-xtensa.c (finish_vinsn): Remove unnecessary calls to as_where (); * symbols.c (S_SET_EXTERNAL): Likewise. * input-scrub.c (as_where): Return the file name. * as.h (as_where): Adjust prototype. * app.c (do_scrub_chars): Adjust. * cond.c (s_elseif): Likewise. (s_else): Likewise. (initialize_cframe): Likewise. * config/obj-coff.c (obj_coff_init_stab_section): Likewise. * config/obj-elf.c (obj_elf_init_stab_section): Likewise. * config/obj-som.c (obj_som_init_stab_section): Likewise. * config/tc-aarch64.c (output_info): Likewise. * config/tc-ia64.c (md_assemble): Likewise. (dot_alias): Likewise. * config/tc-m68k.c (m68k_frob_label): Likewise. * config/tc-mmix.c (s_bspec): Likewise. (mmix_handle_mmixal): Likewise. * config/tc-rx.c (rx_include): Likewise. * config/tc-tic54x.c (tic54x_set_default_include): Likewise. (tic54x_adjust_symtab): Likewise. * config/tc-xtensa.c (directive_push): Likewise. (xtensa_sanity_check): Likewise. (xtensa_relax_frag): Likewise. (md_convert_frag): Likewise. (tinsn_to_slotbuf): Likewise. * dwarf2dbg.c (dwarf2_where): Likewise. * ecoff.c (add_file): Likewise. (ecoff_generate_asm_lineno): Likewise. * expr.c (make_expr_symbol): Likewise. * frags.c (frag_new): Likewise. (frag_var_init): Likewise. * listing.c (listing_newline): Likewise. * messages.c (identify): Likewise. (as_show_where): Likewise. (as_warn_internal): Likewise. (as_bad_internal): Likewise. * read.c (s_irp): Likewise. (s_macro): Likewise. (s_reloc): Likewise. * stabs.c (stabs_generate_asm_file): Likewise. (stabs_generate_asm_lineno): Likewise. (stabs_generate_asm_func): Likewise. * write.c (fix_new_internal): Likewise. * as.h (PRINTF_WHERE_LIKE): Make file name argument const. (as_warn_value_out_of_range): Adjust prototype. (as_bad_value_out_of_range): Adjust prototype. * messages.c (identify): Make file name argument const char *. (as_warn_internal): Likewise. (as_warn_where): Likewise. (as_bad_internal): Likewise. (as_bad_where): Likewise. (as_internal_value_out_of_range): Likewise. (as_warn_value_out_of_range): Likewise. (as_bad_value_out_of_range): Likewise. * as.h (found_comment_file): Change type to const char *. * cond.c (file_line::file): Likewise. * config/obj-coff.c (obj_coff_init_stab_section): Make variable const. * config/obj-elf.c (obj_elf_init_stab_section): Likewise. * config/obj-som.c (obj_som_init_stab_section): Likewise. * config/tc-aarch64.c (output_info): Likewise. * config/tc-alpha.c (insert_operand): Likewise. * config/tc-arc.c (insert_operand): Likewise. * config/tc-d30v.c (check_size): Likewise. * config/tc-ia64.c (struct alias): Likewise. * config/tc-m68k.c (struct label_line): Likewise. * config/tc-mcore.c (md_apply_fix): Likewise. * config/tc-microblaze.c (md_estimate_size_before_relax): Likewise. * config/tc-mips.c (mips16_immed): Likewise. * config/tc-mmix.c (mmix_handle_mmixal): Likewise. * config/tc-ppc.c (ppc_insert_operand): Likewise. * config/tc-rx.c (rx_include): Likewise. * config/tc-s390.c (s390_insert_operand): Likewise. * config/tc-tic54x.c (tic54x_set_default_include): Likewise. (tic54x_adjust_symtab): Likewise. * config/tc-tilegx.c (insert_operand): Likewise. (apply_special_operator): Likewise. * config/tc-tilepro.c (insert_operand): Likewise. * config/tc-xtensa.c (directive_push): Likewise. * ecoff.c (add_file): Likewise. (ecoff_generate_asm_lineno): Likewise. * listing.c (listing_newline): Likewise. * read.c (s_irp): Likewise. * write.c (install_reloc): Likewise. * write.h (struct fix): Likewise. * input-file.c (file_name): Change type to const char *. (saved_file::file_name): Likewise. (input_file_open): Change type of argument to const char *. * input-file.h (input_file_open): Adjust. * input-scrub.c (logical_input_file): change type to const char *. (physical_input_file): Likewise. (struct input_save): Adjust. (input_scrub_push): Adjust. (input_scrub_begin): Adjust. (as_where): Adjust. * input-scrub.c (input_scrub_new_file): Make file name argument const. (input_scrub_include_file): Likewise. (new_logical_line_flags): Likewise. (new_logical_line): Likewise. * as.h: Adjust. * frags.h (struct frag): Change type of fr_file to const char *. * expr.c (expr_symbol_where): Change type of file argument to const char **. * expr.h (expr_symbol_where): Likewise. * config/tc-i370.c (md_apply_fix): adjust. * config/tc-mmix.c (mmix_md_end): Likewise. * config/tc-ppc.c (md_apply_fix): Likewise. * config/tc-s390.c (md_apply_fix): Likewise. * symbols.c (report_op_error): Likewise. (resolve_symbol_value): Likewise. * config/tc-ia64.c (slot::src_file): Change type to const char *. (rsrc::file): Likewise. * config/tc-xtensa.c (xtensa_sanity_check): Change type of variable to const char *. (xtensa_relax_frag): Likewise. (md_convert_frag): Likewise. (tinsn_to_slotbuf): Likewise. * expr.c (expr_symbol_line): Likewise. * macro.c (define_macro): Likewise. * macro.h (macro_struct): Likewise. * messages.c (as_show_where): Likewise. * read.c (s_macro): Likewise. * stabs.c (stabs_generate_asm_file): Likewise. (generate_asm_file): Likewise. (stabs_generate_asm_lineno): Likewise. * write.h (struct reloc_list): Likewise. * input-scrub.c (as_where): Change return type to const char *. * as.h (as_wheree): Adjust.
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-06-17gas: section name substitution sequenceNicolas Pitre1-0/+3
This patch adds the ability to automatically construct a section name based on the prior section. When gas is invoked with --sectname-subst, the occurrence of %S in a section name will be substituted by the name of the current section. For example: .macro exception_code .pushsection %S.exception [exception code here] .popsection .endm .text [code] exception_code [...] .section .init [init code] exception_code [...] The first and second exception_code invocations create the .text.exception and the .init.exception sections respectively. This is useful e.g. to discriminate between anciliary sections that are tied to .init code and can be discarded at run time when initialization is over vs anciliary sections tied to .text sections that need to stay resident. * as.c (show_usage): Document --sectname-subst. (parse_args): Add --sectname-subst. * as.h (flag_sectname_subst): New. * config/obj-elf.c (obj_elf_section_name): Add %S substitution. * doc/as.texinfo: Document it.
2015-04-14Add --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi]H.J. Lu1-10/+0
This patch adds --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi] to ld for ELF targets to support generating compressed DWARF debug sections. We always generate .zdebug_* section since section names have been finalized and they can't be changed easily when compression is being performed. bfd/ * bfd-in.h (compressed_debug_section_type): New. * compress.c (bfd_compress_section_contents): Add an argument for linker write compression and always generate .zdebug_* section when linking. (bfd_init_section_compress_status): Pass FALSE to bfd_compress_section_contents. (bfd_compress_section): New function. * elf.c (elf_fake_sections): For linking, set SEC_ELF_COMPRESS on DWARF debug sections if COMPRESS_DEBUG is set and rename section if COMPRESS_DEBUG_GABI_ZLIB isn't set. (assign_file_positions_for_non_load_sections): Set sh_offset to -1 if SEC_ELF_COMPRESS is set. (assign_file_positions_except_relocs): Likwise. (_bfd_elf_assign_file_positions_for_relocs): Renamed to ... (_bfd_elf_assign_file_positions_for_non_load): This. Change return time to bfd_boolean. Compress the section if SEC_ELF_COMPRESS is set. (_bfd_elf_write_object_contents): Updated. (_bfd_elf_set_section_contents): Write section contents to the buffer if SEC_ELF_COMPRESS is set. * merge.c: Include "elf-bfd.h". (sec_merge_emit): Add arguments for contents and offset. Write to contents with offset if contents isn't NULL. (_bfd_write_merged_section): Write section contents to the buffer if SEC_ELF_COMPRESS is set. Pass contents and output_offset to sec_merge_emit. * elflink.c (bfd_elf_final_link): Allocate the buffer for output section contents if SEC_ELF_COMPRESS is set. * section.c (SEC_ELF_COMPRESS): New. * bfd-in2.h: Regenerated. gas/ * as.h (compressed_debug_section_type): Removed. include/ * bfdlink.h (bfd_link_info): Add compress_debug. ld/ * ld.texinfo: Document --compress-debug-sections=. * ldmain.c (main): Set BFD_COMPRESS on output_bfd if COMPRESS_DEBUG is set. Set BFD_COMPRESS_GABI on output_bfd for COMPRESS_DEBUG_GABI_ZLIB. * lexsup.c (elf_static_list_options): Add --compress-debug-sections=. * emultempl/elf32.em (OPTION_COMPRESS_DEBUG): New. (xtra_long): Add "compress-debug-sections". (gld${EMULATION_NAME}_handle_option): Handle OPTION_COMPRESS_DEBUG. ld/testsuite/ * ld-elf/compress.exp (build_tests): Add tests for --compress-debug-sections=. (run_tests): Likewise. Add additonal tests for --compress-debug-sections=. * ld-elf/gabiend.rt: New file. * ld-elf/gabinormal.rt: Likewise. * ld-elf/gnubegin.rS: Likewise. * ld-elf/gnunormal.rS: Likewise. * ld-elf/zlibbegin.rS: Likewise. * ld-elf/zlibnormal.rS: Likewise.
2015-04-08Add SHF_COMPRESSED support to gas and objcopyH.J. Lu1-2/+12
This patch adds --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi} options to gas and objcopy for ELF files. They control how DWARF debug sections are compressed. --compress-debug-sections=none is equivalent to --nocompress-debug-sections. --compress-debug-sections=zlib and --compress-debug-sections=zlib-gnu are equivalent to --compress-debug-sections. --compress-debug-sections=zlib-gabi compresses DWARF debug sections with SHF_COMPRESSED from the ELF ABI. No linker changes are required to support SHF_COMPRESSED. bfd/ * archive.c (_bfd_get_elt_at_filepos): Also copy BFD_COMPRESS_GABI bit. * bfd.c (bfd::flags): Increase size to 18 bits. (BFD_COMPRESS_GABI): New. (BFD_FLAGS_SAVED): Add BFD_COMPRESS_GABI. (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise. (bfd_update_compression_header): New fuction. (bfd_check_compression_header): Likewise. (bfd_get_compression_header_size): Likewise. (bfd_is_section_compressed_with_header): Likewise. * compress.c (MAX_COMPRESSION_HEADER_SIZE): New. (bfd_compress_section_contents): Return the uncompressed size if the full section contents is compressed successfully. Support converting from/to .zdebug* sections. (bfd_get_full_section_contents): Call bfd_get_compression_header_size to get compression header size. (bfd_is_section_compressed): Renamed to ... (bfd_is_section_compressed_with_header): This. Add a pointer argument to return compression header size. (bfd_is_section_compressed): Use it. (bfd_init_section_decompress_status): Call bfd_get_compression_header_size to get compression header size. Return FALSE if uncompressed section size is 0. * elf.c (_bfd_elf_make_section_from_shdr): Support converting from/to .zdebug* sections. * bfd-in2.h: Regenerated. binutils/ * objcopy.c (do_debug_sections): Add compress_zlib, compress_gnu_zlib and compress_gabi_zlib. (copy_options): Use optional_argument on compress-debug-sections. (copy_usage): Update --compress-debug-sections. (copy_file): Handle compress_zlib, compress_gnu_zlib and compress_gabi_zlib. (copy_main): Handle --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * doc/binutils.texi: Document --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. binutils/testsuite/ * compress.exp: Add tests for --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * binutils-all/dw2-3.rS: New file. * binutils-all/dw2-3.rt: Likewise. * binutils-all/libdw2-compressedgabi.out: Likewise. gas/ * as.c (show_usage): Update --compress-debug-sections. (std_longopts): Use optional_argument on compress-debug-sections. (parse_args): Handle --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * as.h (compressed_debug_section_type): New. (flag_compress_debug): Change type to compressed_debug_section_type. --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * write.c (compress_debug): Set BFD_COMPRESS_GABI for --compress-debug-sections=zlib-gabi. Call bfd_get_compression_header_size to get compression header size. Don't rename section name for --compress-debug-sections=zlib-gabi. * config/tc-i386.c (compressed_debug_section_type): Set to COMPRESS_DEBUG_ZLIB. * doc/as.texinfo: Document --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. gas/testsuite/ * gas/i386/dw2-compressed-1.d: New file. * gas/i386/dw2-compressed-2.d: Likewise. * gas/i386/dw2-compressed-3.d: Likewise. * gas/i386/x86-64-dw2-compressed-2.d: Likewise. * gas/i386/i386.exp: Run dw2-compressed-2, dw2-compressed-1, dw2-compressed-3 and x86-64-dw2-compressed-2. ld/testsuite/ * ld-elf/compress.exp: Add a test for --compress-debug-sections=zlib-gabi. (build_tests): Add 2 tests for --compress-debug-sections=zlib-gabi. (run_tests): Likewise. Verify linker output with zlib-gabi compressed debug input. * ld-elf/compressed1a.d: New file. * ld-elf/compressed1b.d: Likewise. * ld-elf/compressed1c.d: Likewise.
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+1
generated by cgit v1.1 at 2024-07-17 20:25:45 +0000