aboutsummaryrefslogtreecommitdiff
path: root/binutils/objdump.c
AgeCommit message (Collapse)AuthorFilesLines
2017-10-01PR22232, NULL pointer dereference in load_specific_debug_sectionAlan Modra1-2/+3
PR 22232 PR 22230 * objdump.c (load_specific_debug_section): Introduce a temp to stop bfd_get_full_section_contents NULLing out section->start.
2017-10-01PR22230, buffer overflow in display_debug_macroAlan Modra1-4/+5
PR 22230 * objdump.c (load_specific_debug_section): Allocate an extra byte for a terminating NUL.
2017-09-30PR21978, objdump does not display line numbers in certain casesAlan Modra1-12/+18
Same line but different file ought to display file and line. PR 21978 * objdump.c: Formatting. (show_line): Reset prev_line when function name changes.
2017-07-02Use bfd_malloc_and_get_sectionAlan Modra1-37/+7
It's nicer than xmalloc followed by bfd_get_section_contents, since xmalloc exits on failure and needs a check that its size_t arg doesn't lose high bits when converted from bfd_size_type. PR binutils/21665 * objdump.c (strtab): Make var a bfd_byte*. (disassemble_section): Don't limit malloc size. Instead, use bfd_malloc_and_get_section. (read_section_stabs): Use bfd_malloc_and_get_section. Return bfd_byte*. (find_stabs_section): Remove now unnecessary cast. * objcopy.c (copy_object): Use bfd_malloc_and_get_section. Free contents on error return. * nlmconv.c (copy_sections): Use bfd_malloc_and_get_section.
2017-06-30Fix failures in MMIX linker tests introduced by fix for PR 21665.Nick Clifton1-1/+24
PR binutils/21665 * objdump.c (disassemble_section): Move check for an overlarge section to just before the allocation of memory. Do not check section size against file size, but instead use an arbitrary 2Gb limit. Issue a warning message if the section is too big.
2017-06-28Change bfd_get_size/bfd_get_file_size to ufile_ptrH.J. Lu1-1/+1
bfd_get_size and bfd_get_file_size should return the unsigned file size. Otherwise they return negative values for file >= 2GB with 32-bit ufile_ptr. bfd/ * bfd-in2.h: Regenerated. * bfdio.c (bfd_get_size): Change return type to ufile_ptr. (bfd_get_file_size): Likewise. binutils/ * objdump.c (dump_relocs_in_section): Cast to ufile_ptr when comparing against bfd_get_file_size return.
2017-06-26Fix address violations when atempting to parse fuzzed binaries.Nick Clifton1-2/+2
PR binutils/21665 bfd * opncls.c (get_build_id): Check that the section is beig enough to contain the whole note. * compress.c (bfd_get_full_section_contents): Check for and reject a section whoes size is greater than the size of the entire file. * elf32-v850.c (v850_elf_copy_notes): Allow for the ouput to not contain a notes section. binutils* objdump.c (disassemble_section): Skip any section that is bigger than the entire file.
2017-06-19Fix address violation when attempting to display disassembled data.Nick Clifton1-12/+15
PR binutils/21619 * objdump.c (disassemble_bytes): Check that there is sufficient data available before attempting to display it.
2017-06-14Fix address violation when disassembling a corrupt binary.Nick Clifton1-12/+15
PR binutils/21580 binutils * objdump.c (disassemble_bytes): Check for buffer overrun when printing out rae insns. ld * testsuite/ld-nds32/diff.d: Adjust expected output.
2017-05-30Add bfd_get_file_size to get archive element sizeH.J. Lu1-1/+1
We can't use stat() to get archive element size. Add bfd_get_file_size to get size for both normal files and archive elements. bfd/ PR binutils/21519 * bfdio.c (bfd_get_file_size): New function. * bfd-in2.h: Regenerated. binutils/ PR binutils/21519 * objdump.c (dump_relocs_in_section): Replace get_file_size with bfd_get_file_size to get archive element size. * testsuite/binutils-all/objdump.exp (test_objdump_f): New proc. (test_objdump_h): Likewise. (test_objdump_t): Likewise. (test_objdump_r): Likewise. (test_objdump_s): Likewise. Add objdump tests on archive.
2017-05-24Refactor disassembler selectionYao Qi1-1/+3
Nowadays, opcodes/disassemble.c:disassembler selects the proper disassembler according to ABFD only. However, it actually selects disassemblers according to arch, mach, endianess, and abfd. This patch adds them to the parameters of disassembler, so that its caller can still select disassemblers in case that abfd is NULL (a typical case in GDB). There isn't any functionality change. binutils: 2017-05-24 Yao Qi <yao.qi@linaro.org> * objdump.c (disassemble_data): Caller update. include: 2017-05-24 Yao Qi <yao.qi@linaro.org> * dis-asm.h (disassembler): Update declaration. opcodes: 2017-05-24 Yao Qi <yao.qi@linaro.org> * disassemble.c (disassembler): Add arguments a, big and mach. Use them. sim/common: 2017-05-24 Yao Qi <yao.qi@linaro.org> * sim-trace.c (trace_disasm): Caller update.
2017-05-02Prevent memory exhaustion from a corrupt PE binary with an overlarge number ↵Nick Clifton1-0/+8
of relocs. PR 21440 * objdump.c (dump_relocs_in_section): Check for an excessive number of relocs before attempting to dump them.
2017-04-23PR 21415, objdump fails to check bfd_get_section_contents statusAlan Modra1-1/+6
PR 21415 * objdump.c (disassemble_section): Check bfd_get_section_contents status.
2017-03-21Add --inlines option to objdump to include scope backtrace of inlined ↵Andi Kleen1-1/+19
functions when generating source line number information. * objdump.c (unwind_inlines): Add. (option_values): Add OPTION_INLINES. (show_line): Unwind inlines if requested. (main): Parse OPTION_INLINES. (usage): Document --inlines. * doc/binutils.texi: Document --inlines. * NEWS: Likewise.
2017-03-13objdump -dS: warn if source is more recent than objectAlan Modra1-25/+35
If the source file is more recent than the object file, line number information in the object may no longer match the source. So print a warning message. * objdump.c (update_source_path): Add abfd param. Add struct stat vars. Pass to try_print_file_open. Warn if source is more recent than object. (try_print_file_open, slurp_file): Add struct stat param to return fstat. (show_line): Call update_source_path with bfd.
2017-03-10Make objdump's --wide command line option affect its output of DWARF debug ↵Chia-Hao Lo1-1/+1
information. PR binutils/21235 * objdump.c (main): Set do_wide with --wide.
2017-02-28GDB: Add support for the new set/show disassembler-options commands.Peter Bergner1-6/+10
This commit adds support to GDB so that it can modify the disassembler-options value that is passed to the disassembler, similar to objdump's -M option. Currently, the only supported targets are ARM, PowerPC and S/390, but adding support for a new target(s) is not difficult. include/ * dis-asm.h (disasm_options_t): New typedef. (parse_arm_disassembler_option): Remove prototype. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (get_arm_regname_num_options): Likewise. (disassemble_init_s390): New prototype. (disassembler_options_powerpc): Likewise. (disassembler_options_arm): Likewise. (disassembler_options_s390): Likewise. (remove_whitespace_and_extra_commas): Likewise. (disassembler_options_cmp): Likewise. (next_disassembler_option): New inline function. (FOR_EACH_DISASSEMBLER_OPTION): New macro. opcodes/ * disassemble.c Include "safe-ctype.h". (disassemble_init_for_target): Handle s390 init. (remove_whitespace_and_extra_commas): New function. (disassembler_options_cmp): Likewise. * arm-dis.c: Include "libiberty.h". (NUM_ELEM): Delete. (regnames): Use long disassembler style names. Add force-thumb and no-force-thumb options. (NUM_ARM_REGNAMES): Rename from this... (NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE. (get_arm_regname_num_options): Delete. (set_arm_regname_option): Likewise. (get_arm_regnames): Likewise. (parse_disassembler_options): Likewise. (parse_arm_disassembler_option): Rename from this... (parse_arm_disassembler_options): ...to this. Make static. Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options. (print_insn): Use parse_arm_disassembler_options. (disassembler_options_arm): New function. (print_arm_disassembler_options): Handle updated regnames. * ppc-dis.c: Include "libiberty.h". (ppc_opts): Add "32" and "64" entries. (ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp. (powerpc_init_dialect): Add break to switch statement. Use new FOR_EACH_DISASSEMBLER_OPTION macro. (disassembler_options_powerpc): New function. (print_ppc_disassembler_options): Use ARRAY_SIZE. Remove printing of "32" and "64". * s390-dis.c: Include "libiberty.h". (init_flag): Remove unneeded variable. (struct s390_options_t): New structure type. (options): New structure. (init_disasm): Rename from this... (disassemble_init_s390): ...to this. Add initializations for current_arch_mask and option_use_insn_len_bits_p. Remove init_flag. (print_insn_s390): Delete call to init_disasm. (disassembler_options_s390): New function. (print_s390_disassembler_options): Print using information from struct 'options'. * po/opcodes.pot: Regenerate. binutils/ * objdump.c (main): Use remove_whitespace_and_extra_commas. gdb/ * NEWS: Mention new set/show disassembler-options commands. * doc/gdb.texinfo: Document new set/show disassembler-options commands. * disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h". (prospective_options): New static variable. (gdb_disassembler::gdb_disassembler): Initialize m_di.disassembler_options. (gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options. (get_disassembler_options): New function. (set_disassembler_options): Likewise. (set_disassembler_options_sfunc): Likewise. (show_disassembler_options_sfunc): Likewise. (disassembler_options_completer): Likewise. (_initialize_disasm): Likewise. * disasm.h (get_disassembler_options): New prototype. (set_disassembler_options): Likewise. * gdbarch.sh (gdbarch_disassembler_options): New variable. (gdbarch_verify_disassembler_options): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * arm-tdep.c (num_disassembly_options): Delete. (set_disassembly_style): Likewise. (arm_disassembler_options): New static variable. (set_disassembly_style_sfunc): Convert short style name into long option name. Call set_disassembler_options. (show_disassembly_style_sfunc): New function. (arm_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. (_initialize_arm_tdep): Delete regnames variable and update callers. (arm_disassembler_options): Initialize. (disasm_options): New variable. (num_disassembly_options): Rename from this... (num_disassembly_styles): ...to this. Compute by scanning through disasm_options. (valid_disassembly_styles): Initialize using disasm_options. Remove calls to parse_arm_disassembler_option, get_arm_regnames and set_arm_regname_option. Pass show_disassembly_style_sfunc to the "disassembler" setshow command. * rs6000-tdep.c (powerpc_disassembler_options): New static variable. (rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. * s390-tdep.c (s390_disassembler_options): New static variable. (s390_gdbarch_init):all set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. gdb/testsuite/ * gdb.arch/powerpc-power.exp: Delete test. * gdb.arch/powerpc-power.s: Likewise. * gdb.disasm/disassembler-options.exp: New test. * gdb.arch/powerpc-altivec.exp: Likewise. * gdb.arch/powerpc-altivec.s: Likewise. * gdb.arch/powerpc-altivec2.exp: Likewise. * gdb.arch/powerpc-altivec2.s: Likewise. * gdb.arch/powerpc-altivec3.exp: Likewise. * gdb.arch/powerpc-altivec3.s: Likewise. * gdb.arch/powerpc-power7.exp: Likewise. * gdb.arch/powerpc-power7.s: Likewise. * gdb.arch/powerpc-power8.exp: Likewise. * gdb.arch/powerpc-power8.s: Likewise. * gdb.arch/powerpc-power9.exp: Likewise. * gdb.arch/powerpc-power9.s: Likewise. * gdb.arch/powerpc-vsx.exp: Likewise. * gdb.arch/powerpc-vsx.s: Likewise. * gdb.arch/powerpc-vsx2.exp: Likewise. * gdb.arch/powerpc-vsx2.s: Likewise. * gdb.arch/powerpc-vsx3.exp: Likewise. * gdb.arch/powerpc-vsx3.s: Likewise. * gdb.arch/arm-disassembler-options.exp: Likewise. * gdb.arch/powerpc-disassembler-options.exp: Likewise. * gdb.arch/s390-disassembler-options.exp: Likewise.
2017-01-20objdump: Better objdump section headers in wide modeAndrew Burgess1-8/+46
When displaying the section headers table using objdump (-h), the column containing the section header name is currently fixed at 13 characters. A section name that is longer than 13 characters will overflow the column causing the table to become miss-aligned. In this commit I change the behaviour so that _in wide mode_ (-w -h) the section name column is dynamically resized to fit the longest section name we plan to display. In wide mode the column still retains a minimum width of 13 characters. In non-wide more the behaviour is completely unchanged. While I was changing the dump_headers function I have unified the two printf lines that handled the different address widths into a single printf, the address width is now passed into printf using the '*' field width format character. binutils/ChangeLog: * objdump.c (dump_section_header): Extract max section name length from data parameter, use this when formatting output. (find_longest_section_name): New function. (dump_headers): Calculate longest section name when in wide mode, reformat to unify printing of header line. ld/ChangeLog: * testsuite/ld-elf/eh-frame-hdr.d: Update expected results.
2017-01-09Speed up objdump when displaying disassembly mixed with line number and ↵Nick Clifton1-4/+18
source code information. bfd * dwarf2.c (lookup_address_in_function_table): Return early if there are no functions in the given comp unit, or if the high address of the last function in the comp unit is less than the desired address. binutils * objdump.c (display_file): Add new parameter 'last_file'. If last_file is true, do not call bfd_close at the end of the function. (main): Set the value of the last_file parameter when calling display_file.
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-10-11Enhance objdump so that it will use .got, .plt and .plt.got section symbols ↵Nick Clifton1-9/+72
when disassembling, and it will use dynamic relocs to interpret entries in the PLT and GOT. binutils * objdump.c (is_significant_symbol_name): New function. (remove_useless_symbols): Do not remove significanr symbols. (find_symbol_for_address): If an exact match for the specified address has not been found, try scanning the dynamic relocs to see if one of these matches the address. If so, use the symbol associated with the reloc. (objdump_print_addr_with_symbol): Do not print offsets to symbols with no value. (disassemble_section): Only use dynamic relocs if the user requested this. (disassemble_data): Always load dynamic relocs if they are available. ld * ld-aarch64/emit-relocs-515-be.d: Adjust output to match change in objdump. * ld-aarch64/emit-relocs-515.d: Likewise. * ld-aarch64/emit-relocs-516-be.d: Likewise. * ld-aarch64/emit-relocs-516.d: Likewise. * ld-aarch64/farcall-b-plt.d: Likewise. * ld-aarch64/farcall-bl-plt.d: Likewise. * ld-aarch64/gc-plt-relocs.d: Likewise. * ld-aarch64/tls-desc-ie.d: Likewise. * ld-aarch64/tls-tiny-desc.d: Likewise. * ld-aarch64/tls-tiny-gd.d: Likewise. * ld-aarch64/tls-tiny-ie.d: Likewise. * ld-arm/arm-app-abs32.d: Likewise. * ld-arm/arm-app.d: Likewise. * ld-arm/arm-lib-plt32.d: Likewise. * ld-arm/arm-lib.d: Likewise. * ld-arm/armthumb-lib.d: Likewise. * ld-arm/cortex-a8-fix-b-plt.d: Likewise. * ld-arm/cortex-a8-fix-bcc-plt.d: Likewise. * ld-arm/cortex-a8-fix-bl-plt.d: Likewise. * ld-arm/cortex-a8-fix-bl-rel-plt.d: Likewise. * ld-arm/cortex-a8-fix-blx-plt.d: Likewise. * ld-arm/farcall-mixed-app-v5.d: Likewise. * ld-arm/farcall-mixed-app.d: Likewise. * ld-arm/farcall-mixed-app2.d: Likewise. * ld-arm/farcall-mixed-lib-v4t.d: Likewise. * ld-arm/farcall-mixed-lib.d: Likewise. * ld-arm/ifunc-10.dd: Likewise. * ld-arm/ifunc-14.dd: Likewise. * ld-arm/ifunc-15.dd: Likewise. * ld-arm/ifunc-3.dd: Likewise. * ld-arm/ifunc-4.dd: Likewise. * ld-arm/ifunc-9.dd: Likewise. * ld-arm/long-plt-format.d: Likewise. * ld-arm/mixed-app-v5.d: Likewise. * ld-arm/mixed-app.d: Likewise. * ld-arm/mixed-lib.d: Likewise. * ld-arm/tls-lib-loc.d: Likewise. * ld-cris/dso-pltdis1.d: Likewise. * ld-cris/dso-pltdis2.d: Likewise. * ld-cris/dso12-pltdis.d: Likewise. * ld-elf/symbolic-func.r: Likewise. * ld-frv/fdpic-pie-1.d: Likewise. * ld-frv/fdpic-pie-2.d: Likewise. * ld-frv/fdpic-pie-6.d: Likewise. * ld-frv/fdpic-pie-7.d: Likewise. * ld-frv/fdpic-pie-8.d: Likewise. * ld-frv/fdpic-shared-1.d: Likewise. * ld-frv/fdpic-shared-2.d: Likewise. * ld-frv/fdpic-shared-3.d: Likewise. * ld-frv/fdpic-shared-4.d: Likewise. * ld-frv/fdpic-shared-5.d: Likewise. * ld-frv/fdpic-shared-6.d: Likewise. * ld-frv/fdpic-shared-7.d: Likewise. * ld-frv/fdpic-shared-8.d: Likewise. * ld-frv/fdpic-shared-local-2.d: Likewise. * ld-frv/fdpic-shared-local-8.d: Likewise. * ld-frv/fdpic-static-1.d: Likewise. * ld-frv/fdpic-static-2.d: Likewise. * ld-frv/fdpic-static-6.d: Likewise. * ld-frv/fdpic-static-7.d: Likewise. * ld-frv/fdpic-static-8.d: Likewise. * ld-frv/tls-dynamic-2.d: Likewise. * ld-frv/tls-initial-shared-2.d: Likewise. * ld-frv/tls-relax-shared-2.d: Likewise. * ld-frv/tls-shared-2.d: Likewise. * ld-i386/plt-nacl.pd: Likewise. * ld-i386/plt-pic-nacl.pd: Likewise. * ld-i386/plt-pic.pd: Likewise. * ld-i386/plt.pd: Likewise. * ld-i386/pr19636-1d-nacl.d: Likewise. * ld-i386/pr19636-1d.d: Likewise. * ld-i386/pr19636-2c-nacl.d: Likewise. * ld-i386/pr19636-2c.d: Likewise. * ld-ifunc/ifunc-21-x86-64.d: Likewise. * ld-ifunc/ifunc-22-x86-64.d: Likewise. * ld-ifunc/pr17154-i386.d: Likewise. * ld-ifunc/pr17154-x86-64.d: Likewise. * ld-m68k/plt1-68020.d: Likewise. * ld-m68k/plt1-cpu32.d: Likewise. * ld-m68k/plt1-isab.d: Likewise. * ld-m68k/plt1-isac.d: Likewise. * ld-metag/shared.d: Likewise. * ld-metag/stub_pic_app.d: Likewise. * ld-metag/stub_pic_shared.d: Likewise. * ld-metag/stub_shared.d: Likewise. * ld-s390/tlsbin_64.dd: Likewise. * ld-s390/tlspic_64.dd: Likewise. * ld-tic6x/shlib-1.dd: Likewise. * ld-tic6x/shlib-1b.dd: Likewise. * ld-tic6x/shlib-1rb.dd: Likewise. * ld-tic6x/shlib-app-1.dd: Likewise. * ld-tic6x/shlib-app-1b.dd: Likewise. * ld-tic6x/shlib-app-1r.dd: Likewise. * ld-tic6x/shlib-app-1rb.dd: Likewise. * ld-tic6x/shlib-noindex.dd: Likewise. * ld-vax-elf/export-class-data.dd: Likewise. * ld-vax-elf/plt-local-lib.dd: Likewise. * ld-vax-elf/plt-local.dd: Likewise. * ld-x86-64/bnd-ifunc-2.d: Likewise. * ld-x86-64/bnd-plt-1.d: Likewise. * ld-x86-64/gotpcrel1.dd: Likewise. * ld-x86-64/libno-plt-1b.dd: Likewise. * ld-x86-64/load1c-nacl.d: Likewise. * ld-x86-64/load1c.d: Likewise. * ld-x86-64/load1d-nacl.d: Likewise. * ld-x86-64/load1d.d: Likewise. * ld-x86-64/mov1a.d: Likewise. * ld-x86-64/mov1b.d: Likewise. * ld-x86-64/mov1c.d: Likewise. * ld-x86-64/mov1d.d: Likewise. * ld-x86-64/mov2a.d: Likewise. * ld-x86-64/mov2b.d: Likewise. * ld-x86-64/mov2c.d: Likewise. * ld-x86-64/mov2d.d: Likewise. * ld-x86-64/mpx3.dd: Likewise. * ld-x86-64/mpx4.dd: Likewise. * ld-x86-64/no-plt-1a.dd: Likewise. * ld-x86-64/no-plt-1b.dd: Likewise. * ld-x86-64/no-plt-1c.dd: Likewise. * ld-x86-64/no-plt-1e.dd: Likewise. * ld-x86-64/no-plt-1f.dd: Likewise. * ld-x86-64/no-plt-1g.dd: Likewise. * ld-x86-64/plt-main-bnd.dd: Likewise. * ld-x86-64/plt-nacl.pd: Likewise. * ld-x86-64/plt.pd: Likewise. * ld-x86-64/pr18591.d: Likewise. * ld-x86-64/pr19609-1c.d: Likewise. * ld-x86-64/pr19609-1e.d: Likewise. * ld-x86-64/pr19609-1j.d: Likewise. * ld-x86-64/pr19609-1l.d: Likewise. * ld-x86-64/pr19609-1m.d: Likewise. * ld-x86-64/pr19609-5b.d: Likewise. * ld-x86-64/pr19609-5c.d: Likewise. * ld-x86-64/pr19609-5e.d: Likewise. * ld-x86-64/pr19609-6b.d: Likewise. * ld-x86-64/pr19609-7b.d: Likewise. * ld-x86-64/pr19609-7d.d: Likewise. * ld-x86-64/pr19636-2d.d: Likewise. * ld-x86-64/pr20093-1.d: Likewise. * ld-x86-64/pr20093-2.d: Likewise. * ld-x86-64/pr20253-1b.d: Likewise. * ld-x86-64/pr20253-1d.d: Likewise. * ld-x86-64/pr20253-1f.d: Likewise. * ld-x86-64/pr20253-1h.d: Likewise. * ld-x86-64/pr20253-1j.d: Likewise. * ld-x86-64/pr20253-1l.d: Likewise. * ld-x86-64/protected3.d: Likewise. * ld-x86-64/tlsbin.dd: Likewise. * ld-x86-64/tlsbin2.dd: Likewise. * ld-x86-64/tlsbindesc.dd: Likewise. * ld-x86-64/tlsdesc-nacl.pd: Likewise. * ld-x86-64/tlsdesc.dd: Likewise. * ld-x86-64/tlsdesc.pd: Likewise. * ld-x86-64/tlsgd10.dd: Likewise. * ld-x86-64/tlsgd5.dd: Likewise. * ld-x86-64/tlsgd6.dd: Likewise. * ld-x86-64/tlsgd8.dd: Likewise. * ld-x86-64/tlsgdesc.dd: Likewise. * ld-x86-64/tlspic.dd: Likewise. * ld-x86-64/tlspic2.dd: Likewise. 2016-10-11 Nick Clifton <nickc@redhat.com> PR ld/20535 * emultempl/elf32.em (_search_needed): Add support for pseudo environment variables supported by ld.so. Namely $ORIGIN, $LIB and $PLATFORM. * configure.ac: Add getauxval to list AC_CHECK_FUNCS list. * config.in: Regenerate. * configure: Regenerate. 2016-10-11 Alan Modra <amodra@gmail.com> * ldlang.c (lang_do_assignments_1): Descend into output section statements that do not yet have bfd sections. Set symbol section temporarily for symbols defined in such statements to the undefined section. Don't error on data or reloc statements until final phase. * ldexp.c (exp_fold_tree_1 <etree_assign>): Handle bfd_und_section in expld.section. * testsuite/ld-mmix/bpo-10.d: Adjust. * testsuite/ld-mmix/bpo-11.d: Adjust. 2016-10-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * emulparams/elf64_s390.sh: Move binary start to 16M. * testsuite/ld-s390/tlsbin_64.dd: Adjust testcases accordingly. * testsuite/ld-s390/tlsbin_64.rd: Likewise. 2016-10-07 Alan Modra <amodra@gmail.com> * ldexp.c (MAX): Define. (exp_unop, exp_binop, exp_trinop): Alloc at least enough for etree_type.value. 2016-10-07 Alan Modra <amodra@gmail.com> * testsuite/lib/ld-lib.exp (is_generic_elf): New, extracted from.. * testsuite/ld-elf/elf.exp: ..here. 2016-10-06 Ludovic Court?s <ludo@gnu.org> * emulparams/elf32bmipn32-defs.sh: Shift quote of "x$EMULATION_NAME" to the left to work around <http://ftp.gnu.org/gnu/bash/bash-4.2-patches/bash42-007>. 2016-10-06 Alan Modra <amodra@gmail.com> * lexsup.c: Spell fall through comments consistently and add missing fall through comments. 2016-10-06 Alan Modra <amodra@gmail.com> * plugin.c (asymbol_from_plugin_symbol): Avoid compiler warning by adding return. 2016-10-04 Alan Modra <amodra@gmail.com> * ld.texinfo (Expression Section): Update result of arithmetic expressions. * ldexp.c (arith_result_section): New function. (fold_binary): Use it. 2016-10-04 Alan Modra <amodra@gmail.com> * ldexp.c (exp_value_fold): New function. (exp_unop, exp_binop, exp_trinop): Use it. 2016-09-30 Alan Modra <amodra@gmail.com> * scripttempl/v850.sc: Don't reference __ctbp, __ep, __gp when not relocating. * scripttempl/v850_rh850.sc: Likewise. 2016-09-30 Alan Modra <amodra@gmail.com> PR ld/20528 * testsuite/ld-elf/pr20528a.d: xfail generic elf targets. Allow multiple .text sections for hppa-linux. * testsuite/ld-elf/pr20528b.d: Likewise. 2016-09-30 Alan Modra <amodra@gmail.com> * ldmain.c (default_bfd_error_handler): New function pointer. (ld_bfd_error_handler): New function. (main): Arrange to call it on bfd errors/warnings. (ld_bfd_assert_handler): Enable tail call. 2016-09-30 Alan Modra <amodra@gmail.com> * ldlang.c (ignore_bfd_errors): Update params. 2016-09-29 H.J. Lu <hongjiu.lu@intel.com> PR ld/20528 * emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Don't merge 2 sections with different SHF_EXCLUDE. * testsuite/ld-elf/pr20528a.d: New file. * testsuite/ld-elf/pr20528a.s: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr20528b.s: Likewise. 2016-09-28 Christophe Lyon <christophe.lyon@linaro.org> PR ld/20608 * testsuite/ld-arm/arm-elf.exp: Handle new testcase. * testsuite/ld-arm/farcall-mixed-app2.d: New file. * testsuite/ld-arm/farcall-mixed-app2.r: Likewise. * testsuite/ld-arm/farcall-mixed-app2.s: Likewise. * testsuite/ld-arm/farcall-mixed-app2.sym: Likewise. 2016-09-26 Vlad Zakharov <vzakhar@synopsys.com> * Makefile.in: Regenerate. * configure: Likewise. 2016-09-26 Alan Modra <amodra@gmail.com> * testsuite/ld-powerpc/attr-gnu-4-4.s: Delete. * testsuite/ld-powerpc/attr-gnu-4-14.d: Delete. * testsuite/ld-powerpc/attr-gnu-4-24.d: Delete. * testsuite/ld-powerpc/attr-gnu-4-34.d: Delete. * testsuite/ld-powerpc/attr-gnu-4-41.d: Delete. * testsuite/ld-powerpc/attr-gnu-4-32.d: Adjust expected warning. * testsuite/ld-powerpc/attr-gnu-8-23.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-01.d: Adjust expected output. * testsuite/ld-powerpc/attr-gnu-4-02.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-03.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-10.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-11.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-20.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-22.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-33.d: Likewise. * testsuite/ld-powerpc/attr-gnu-8-11.d: Likewise. * testsuite/ld-powerpc/powerpc.exp: Don't run deleted tests. 2016-09-23 Akihiko Odaki <akihiko.odaki.4i@stu.hosei.ac.jp> PR ld/20595 * testsuite/ld-arm/unwind-4.d: Add -q option to linker command line and -r option to objdump command line. Match emitted relocs to make sure that superflous relocs are not generated. 2016-09-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * emulparams/elf64_s390.sh: Change TEXT_START_ADDR to 256MB. * testsuite/ld-s390/tlsbin_64.dd: Adjust testcase accordingly. * testsuite/ld-s390/tlsbin_64.rd: Likewise. 2016-09-22 Nick Clifton <nickc@redhat.com> * emultempl/elf32.em (_try_needed): In verbose mode, report failed attempts to find a needed library. 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> * testsuite/ld-aarch64/emit-relocs-28.d: Expect spaces after "," in addresses. * testsuite/ld-aarch64/emit-relocs-301-be.d: Likewise. * testsuite/ld-aarch64/emit-relocs-301.d: Likewise. * testsuite/ld-aarch64/emit-relocs-302-be.d: Likewise. * testsuite/ld-aarch64/emit-relocs-302.d: Likewise. * testsuite/ld-aarch64/emit-relocs-310-be.d: Likewise. * testsuite/ld-aarch64/emit-relocs-310.d: Likewise. * testsuite/ld-aarch64/emit-relocs-313.d: Likewise. * testsuite/ld-aarch64/emit-relocs-515-be.d: Likewise. * testsuite/ld-aarch64/emit-relocs-515.d: Likewise. * testsuite/ld-aarch64/emit-relocs-516-be.d: Likewise. * testsuite/ld-aarch64/emit-relocs-516.d: Likewise. * testsuite/ld-aarch64/emit-relocs-531.d: Likewise. * testsuite/ld-aarch64/emit-relocs-532.d: Likewise. * testsuite/ld-aarch64/emit-relocs-533.d: Likewise. * testsuite/ld-aarch64/emit-relocs-534.d: Likewise. * testsuite/ld-aarch64/emit-relocs-535.d: Likewise. * testsuite/ld-aarch64/emit-relocs-536.d: Likewise. * testsuite/ld-aarch64/emit-relocs-537.d: Likewise. * testsuite/ld-aarch64/emit-relocs-538.d: Likewise. * testsuite/ld-aarch64/erratum835769.d: Likewise. * testsuite/ld-aarch64/erratum843419.d: Likewise. * testsuite/ld-aarch64/farcall-b-plt.d: Likewise. * testsuite/ld-aarch64/farcall-bl-plt.d: Likewise. * testsuite/ld-aarch64/gc-plt-relocs.d: Likewise. * testsuite/ld-aarch64/ifunc-21.d: Likewise. * testsuite/ld-aarch64/ifunc-7c.d: Likewise. * testsuite/ld-aarch64/tls-desc-ie.d: Likewise. * testsuite/ld-aarch64/tls-large-desc-be.d: Likewise. * testsuite/ld-aarch64/tls-large-desc.d: Likewise. * testsuite/ld-aarch64/tls-large-ie-be.d: Likewise. * testsuite/ld-aarch64/tls-large-ie.d: Likewise. * testsuite/ld-aarch64/tls-relax-all.d: Likewise. * testsuite/ld-aarch64/tls-relax-gd-ie.d: Likewise. * testsuite/ld-aarch64/tls-relax-gdesc-ie-2.d: Likewise. * testsuite/ld-aarch64/tls-relax-gdesc-ie.d: Likewise. * testsuite/ld-aarch64/tls-relax-large-desc-ie-be.d: Likewise. * testsuite/ld-aarch64/tls-relax-large-desc-ie.d: Likewise. * testsuite/ld-aarch64/tls-tiny-desc.d: Likewise. * testsuite/ld-aarch64/tls-tiny-gd.d: Likewise. gas * gas/arm/tls.d: Adjust output to match change in objdump.
2016-07-09PR20337, Objdump makes poor choice of symbolsAlan Modra1-0/+15
binutils/ PR binutils/20337 * objdump.c (compare_symbols): For ELF, sort same value/type symbols according to size. ld/ * testsuite/ld-powerpc/elfv2exe.d: Update.
2016-07-05[ARM] Change noread to purecode.Andre Vieria1-6/+1
bfd/ChangeLog 2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com> * bfd-in2.h (SEC_ELF_NOREAD): Rename to ... (SEC_ELF_PURECODE): ... this. * elf32-arm.c (elf32_arm_post_process_headers): Rename SEC_ELF_NOREAD to SEC_ELF_NOREAD. (elf32_arm_fake_sections): Likewise. (elf_32_arm_section_flags): Likewise. (elf_32_arm_lookup_section_flags): Likewise. * section.c (SEC_ELF_NOREAD): Rename to ... (SEC_ELF_PURECODE): ... this. binutils/ChangeLog 2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com> * objdump.c (dump_section_header): Rename SEC_ELF_NOREAD to SEC_ELF_NOREAD. * readelf.c (get_elf_section_flags): Rename ARM_NOREAD to ARM_PURECODE and SHF_ARM_NOREAD to SHF_ARM_PURECODE. (process_section_headers): Rename noread to purecode. * section.c (SEC_ELF_NOREAD): Rename to ... (SEC_ELF_PURECODE): ... this. include/ChangeLog 2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com> * elf/arm.h (SHF_ARM_NOREAD): Rename to ... (SHF_ARM_PURECODE): ... this. ld/ChangeLog 2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com> * testsuite/ld-arm/arm_noread.ld: Renamed to ... testsuite/ld-arm/arm_purecode.ld: ... this, and replaced all noread's by purecode.
2016-06-28Invalid read in _bfd_elf_get_symbol_version_stringAlan Modra1-1/+2
PR 20304 * objdump.c (objdump_print_symname): Don't attempt to retrieve version info from synthetic symbols.
2016-06-24Limit objdump -S context linesAlan Modra1-2/+11
Showing context lines is confusing in many cases, an obvious example being loops. * objdump.c (struct print_file_list): Add "max_printed". (try_print_file_open): Init new field. (show_line): Don't show 5 context lines when redisplaying source.
2016-04-13Add init_dwarf_regnames_s390Andreas Arnez1-0/+4
Define and use DWARF register names for s390. binutils/ChangeLog: * dwarf.h (init_dwarf_regnames_s390): Declare. * dwarf.c (dwarf_regnames_s390): New. (init_dwarf_regnames_s390): New. (init_dwarf_regnames): Call it. * objdump.c (dump_dwarf): Likewise.
2016-03-21Remove use of alloca.Nick Clifton1-4/+9
bfd * warning.m4 (GCC_WARN_CFLAGS): Add -Wstack-usage=262144 * configure: Regenerate. * elf32-m68hc1x.c (elf32_m68hc11_relocate_section): Replace use of alloca with call to xmalloc. * elf32-nds32.c: Likewise. * elf64-hppa.c: Likewise. * elfxx-mips.c: Likewise. * pef.c: Likewise. * pei-x86_64.c: Likewise. * som.c: Likewise. * xsym.c: Likewise. binutils * dlltool.c: Replace use of alloca with call to xmalloc. * dllwrap.c: Likewise. * nlmconv.c: Likewise. * objdump.c: Likewise. * resrc.c: Likewise. * winduni.c: Likewise. * configure: Regenerate. gas * atof-generic.c: Replace use of alloca with call to xmalloc. * cgen.c: Likewise. * dwarf2dbg.c: Likewise. * macro.c: Likewise. * remap.c: Likewise. * stabs.c: Likewise. * symbols.c: Likewise. * config/obj-elf.c: Likewise. * config/tc-aarch64.c: Likewise. * config/tc-arc.c: Likewise. * config/tc-arm.c: Likewise. * config/tc-avr.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-mips.c: Likewise. * config/tc-msp430.c: Likewise. * config/tc-nds32.c: Likewise. * config/tc-ppc.c: Likewise. * config/tc-sh.c: Likewise. * config/tc-tic30.c: Likewise. * config/tc-tic54x.c: Likewise. * config/tc-xstormy16.c: Likewise. * config/te-vms.c: Likewise. * configure: Regenerate. ld * emultempl/msp430.em: Replace use of alloca with call to xmalloc. * plugin.c: Likewise. * pe-dll.c: Likewise.
2016-01-20Add support for an ARM specific 'y' section attribute flag to mark the ↵Mickael Guene1-1/+15
section as NOREAD. bfd/ChangeLog: * elf32-arm.c ((elf32_arm_special_sections): Remove catch of noread section using '.text.noread' pattern. gas/ChangeLog: * config/obj-elf.c (obj_elf_change_section) : Allow arm section with SHF_ARM_NOREAD section flag. * config/tc-arm.h (md_elf_section_letter) : Implement this hook to handle letter 'y'. (arm_elf_section_letter) : Declare it. * config/tc-arm.c (arm_elf_section_letter): Handle letter 'y' to set SHF_ARM_NOREAD section flag. * doc/c-arm.texi (ARM section attribute 'y'): Document it. gas/testsuite/ChangeLog: * gas/arm/section-execute-only.s: New test case. * gas/arm/section-execute-only.d: Expected output. ld/testsuite/ChangeLog: * ld-arm/thumb1-noread-not-present-mixing-two-section.s: Add 'y' attribute usage. * ld-arm/thumb1-noread-present-one-section.s: Likewise. * ld-arm/thumb1-noread-present-two-section.s: Likewise. * ld-arm/thumb1-input-section-flag-match.s: Likewise. binutils/ChangeLog: * readelf.c (get_elf_section_flags): Display y letter for section with SHF_ARM_NOREAD section flag in readelf section output. (process_section_headers): Add y letter in readelf section output key mapping for ARM architecture.
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-08-12Remove trailing spaces in binutilsH.J. Lu1-50/+50
2015-06-22Stop "objdump -d" from disassembling past a symbolic address.Nick Clifton1-7/+18
include * dis-asm.h (struct disassemble_info): Add stop_vma field. binuti * objdump.c (disassemble_bytes): Set the stop_vma field in the disassemble_info structure when disassembling code sections with -d. * doc/binutils.texi (objdump): Document the discrepancy between -d and -D. opcodes * dis-buf.c (buffer_read_memory): Fail is stop_vma is set and the requested region lies beyond it. * bfin-dis.c (print_insn_bfin): Ignore sysop instructions when looking for 32-bit insns. * mcore-dis.c (print_insn_mcore): Disable stop_vma when reading data. * sh-dis.c (print_insn_sh): Likewise. * tic6x-dis.c (print_insn_tic6x): Disable stop_vma when reading blocks of instructions. * vax-dis.c (print_insn_vax): Check that the requested address does not clash with the stop_vma. tests * gas/arm/backslash-at.s: Add extra .byte directives so that the foo symbol does not appear to point half way through an instruction. * gas/arm/backslash-at.d: Update expected disassembly. * gas/i386/ilp32/x86-64-opcode-inval-intel.d: Likewise. * gas/i386/ilp32/x86-64-opcode-inval.d: Likewise. * gas/i386/x86-64-opcode-inval-intel.d: Likewise. * gas/i386/x86-64-opcode-inval.d: Likewise.
2015-05-15Fix PR18374 by making readelf and objdump ignore end-of-list markers in the ↵Nick Clifton1-1/+41
.debug_loc section if there are relocations against them. PR binutils/18374 bin * dwarf.h (struct dwarf_section): Add reloc_info and num_relocs fields. (struct dwarf_section_display): Change bitfield to boolean. (reloc_at): Add prototype. * dwarf.c (display_loc_list): Ignore list terminators if there are relocs against them. (display_debug_loc): Issue a warning if there are relocs against the .debug_loc section. (display_displays): Initialise reloc_info and num_relocs fields. * objdump.c (load_specific_debug_section): Initialise reloc_info and num_relocs fields. (reloc_at): New function. * readelf.c (is_32bit_abs_reloc): Add IA64's R_IA64_DIS32LSB reloc. (reloc_at): New function. (apply_relocations): Add relocs_return and num_relocs_return parameters. Fill them in with the loaded relocs if non-NULL. (dump_section_as_bytes): Update call to apply_relocations. (load_specific_debug_section): Initialise reloc_info and num_relocs fields. tests * binutils-all/pr18374.s: New test file. * binutils-all/readelf.exp: Assemble and run the new test. * binutils-all/readelf.pr18374: Expected output from readelf.
2015-05-11Add init_dwarf_regnames_iamcuH.J. Lu1-0/+4
* dwarf.c (dwarf_regnames_iamcu): New. (init_dwarf_regnames_iamcu): Likewise. (init_dwarf_regnames): Call init_dwarf_regnames_iamcu for EM_IAMCU. * dwarf.h (init_dwarf_regnames_iamcu): New. * objdump.c (dump_dwarf): Call init_dwarf_regnames_iamcu for bfd_arch_iamcu.
2015-02-24Improves the warning message produyced by objdump when it cannot load a section.Nick Clifton1-1/+2
* objdump.c (dump_section): Extend the warning message displayed when a section cannot be loaded.
2015-02-03More fixes for illegal memory accesses triggered by running objdump on ↵Nick Clifton1-1/+1
fuzzed binaries. PR binutils/17512 * objdump.c (display_any_bfd): Fail if archives nest too deeply. * ecoff.c: Use bfd_alloc2 to allocate space for structure arrays. (_bfd_ecoff_slurp_symbol_table): Check for a negative symbol index or an out of range fdr index. * elf-m10300.c (mn10300_info_to_howto): Fix typo in error message. * elf32-arc.c (arc_info_to_howto_rel): Likewise. * elf32-avr.c (avr_info_to_howto_rela): Likewise. * elf32-cr16.c (elf_cr16_info_to_howto): Likewise. * elf32-cr16c.c (elf_cr16c_info_to_howto_rel): Likewise. * elf32-cris.c (cris_info_to_howto_rela): Likewise. * elf32-crx.c (elf_crx_info_to_howto): Likewise. * elf32-d10v.c (d10v_info_to_howto_rel): Likewise. * elf32-d30v.c (d30v_info_to_howto_rel): Likewise. * elf32-epiphany.c (epiphany_info_to_howto_rela): Likewise. * elf32-fr30.c (fr30_info_to_howto_rela): Likewise. * elf32-frv.c (frv_info_to_howto_rela): Likewise. * elf32-i370.c (i370_elf_info_to_howto): Likewise. * elf32-i960.c (elf32_i960_info_to_howto_rel): Likewise. * elf32-ip2k.c (ip2k_info_to_howto_rela): Likewise. * elf32-iq2000.c (iq2000_info_to_howto_rela): Likewise. * elf32-lm32.c (lm32_info_to_howto_rela): Likewise. * elf32-m32c.c (m32c_info_to_howto_rela): Likewise. * elf32-m32r.c (m32r_info_to_howto_rel): Likewise. * elf32-m68hc11.c (m68hc11_info_to_howto_rel): Likewise. * elf32-m68hc12.c (m68hc11_info_to_howto_rel): Likewise. * elf32-mcore.c (mcore_elf_info_to_howto): Likewise. * elf32-mep.c (mep_info_to_howto_rela): Likewise. * elf32-metag.c (metag_info_to_howto_rela): Likewise. * elf32-microblaze.c (microblaze_elf_info_to_howto): Likewise. * elf32-moxie.c (moxie_info_to_howto_rela): Likewise. * elf32-msp430.c (msp430_info_to_howto_rela): Likewise. * elf32-mt.c (mt_info_to_howto_rela): Likewise. * elf32-nds32.c (nds32_info_to_howto_rel): Likewise. * elf32-or1k.c (or1k_info_to_howto_rela): Likewise. * elf32-pj.c (pj_elf_info_to_howto): Likewise. * elf32-ppc.c (ppc_elf_info_to_howto): Likewise. * elf32-rl78.c (rl78_info_to_howto_rela): Likewise. * elf32-rx.c (rx_info_to_howto_rela): Likewise. * elf32-sh.c (sh_elf_info_to_howto): Likewise. * elf32-spu.c (spu_elf_info_to_howto): Likewise. * elf32-v850.c (v850_elf_perform_relocation): Likewise. * elf32-vax.c (rtype_to_howto): Likewise. * elf32-visium.c (visium_info_to_howto_rela): Likewise. * elf32-xgate.c (xgate_info_to_howto_rel): Likewise. * elf32-xtensa.c (elf_xtensa_info_to_howto_rela): Likewise. * elf64-alpha.c (elf64_alpha_info_to_howto): Likewise. * elf64-mmix.c (mmix_info_to_howto_rela): Likewise. * mach-o.c: Use bfd_alloc2 to allocate space for structure arrays. (bfd_mach_o_canonicalize_one_reloc): Fix check on out of range symbol indicies. (bfd_mach_o_canonicalize_relocs): Check for out of range alloc. (bfd_mach_o_canonicalize_dynamic_reloc): Likewise. (bfd_mach_o_build_dysymtab): Likewise. (bfd_mach_o_write_symtab_content): Set the string table size to zero upon error. (bfd_mach_o_read_symtab_symbols): Reset the nsyms value if the read fails. * peXXigen.c (pe_print_edata): Check for numeric overflow in edt fields. * tekhex.c (first_phase): Check for src pointer reaching end of buffer.
2015-01-21Fix memory access violations triggered by running strip on fuzzed binaries.Nick Clifton1-0/+1
PR binutils/17512 * coffcode.h (coff_set_arch_mach_hook): Check return value from bfd_malloc. (coff_slurp_line_table): Return FALSE if the line number information was corrupt. (coff_slurp_symbol_table): Return FALSE if the symbol information was corrupt. * mach-o.c (bfd_mach_o_bfd_copy_private_header_data): Always initialise the fields of the dyld_info structure. (bfd_mach_o_build_exec_seg_command): Replace assertion with an error message and a return value. (bfd_mach_o_layout_commands): Change the function to boolean. Return FALSE if the function fails. (bfd_mach_o_build_commands): Fail if bfd_mach_o_layout_commands fails. (bfd_mach_o_read_command): Fail if an unrecognised command is encountered. * peXXigen.c (_bfd_XXi_swap_aouthdr_in): Set bfd_error if the read fails. (slurp_symtab): Check the return from bfd_malloc. (_bfd_XX_bfd_copy_private_bfd_data_common): Fail if the copy encountered an error. (_bfd_XXi_final_link_postscript): Fail if a section could not be copied. * peicode.h (pe_bfd_object_p): Fail if the header could not be swapped in. * tekhex.c (first_phase): Fail if the section is too big. * versados.c (struct esdid): Add content_size field. (process_otr): Use and check the new field. (versados_get_section_contents): Check that the section exists and that the requested data is available. PR binutils/17512 * addr2line.c (main): Call bfd_set_error_program_name. * ar.c (main): Likewise. * coffdump.c (main): Likewise. * cxxfilt.c (main): Likewise. * dlltool.c (main): Likewise. * nlmconv.c (main): Likewise. * nm.c (main): Likewise. * objdump.c (main): Likewise. * size.c (main): Likewise. * srconv.c (main): Likewise. * strings.c (main): Likewise. * sysdump.c (main): Likewise. * windmc.c (main): Likewise. * windres.c (main): Likewise. * objcopy.c (main): Likewise. (copy_relocations_in_section): Check for relocs without associated symbol pointers.
2015-01-07Fix memory access violations exposed by running the srconv tool on fuzzed ↵Nick Clifton1-1/+8
binaries. PR binutils/17512 * objdump.c (display_any_bfd): Add a depth limit to nested archive display in order to avoid infinite loops. * srconv.c: Replace calls to abort with calls to fatal with an error message.
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+1
2014-12-10Don't always build coffgen.oAlan Modra1-0/+1
Removes a bunch of unused functions from libbfd when building ELF or AOUT. Split off the bits we need externally when not building a COFF target into coff-bfd.c and coff-bfd.h. bfd/ * Makefile.am (BFD32_LIBS, BFD32_LIBS_CFILES): Remove dwarf2 and coffgen. Add coff-bfd. Sort. (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Add coffgen and dwarf2. * bfd-in.h (bfd_coff_get_syment, bfd_coff_get_auxent): Delete. (struct coff_comdat_info, bfd_coff_get_comdat_section): Delete. * coffgen.c (coff_symbol_from): Move to coff-bfd.h as macro, without unused param. Update uses. (bfd_coff_get_comdat_section): Move to coff-bfd.h as macro. (bfd_coff_get_syment, bfd_coff_get_auxent): Move to coff-bfd.c. * libcoff-in.h: #include "coff-bfd.h". (struct coff_section_tdata, coff_section_data): Move to coff-bfd.h. (coff_symbol_from): Delete. * coff-bfd.c: New file. * coff-bfd.h: New file. * coff-i386.c: Update coff_symbol_from occurrences. * coff-i960.c: Likewise. * coff-m68k.c: Likewise. * coff-sh.c: Likewise. * coff-x86_64.c: Likewise. * coffcode.h: Likewise. * pe-mips.c: Likewise. * configure.ac (elf): Add dwarf2.lo. (coffgen, coff, ecoff, xcoff): Define. Use when mapping bfd target vectors to .o files. Add dwarf2 for mach-o targets. Fix the sh target FIXME. * po/SRC-POTFILES.in: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. * bfd-in2.h: Regenerate. * libcoff.h: Regenerate. binutils/ * objdump.c: #include "coff-bfd.h". ld/ * ldmisc.c: #include "coff-bfd.h"
2014-12-09More fixes for memory access violations triggered by fuzzed binaries.Nick Clifton1-1/+9
PR binutils/17512 * objdump.c (display_any_bfd): Avoid infinite loop closing and opening the same archive again and again. * archive64.c (bfd_elf64_archive_slurp_armap): Add range checks. * libbfd.c (safe_read_leb128): New function. * libbfd-in.h (safe_read_leb128): Add prototype. * libbfd.h: Regenerate. * elf-attrs.c (_bfd_elf_parse_attributes): Use safe_read_leb128. Check for an over-long subsection length. * elf.c (elf_parse_notes): Check that the namedata is long enough for the string comparison that is about to be performed. (elf_read_notes): Zero-terminate the note buffer.
2014-12-03Fix memory access problems exposed by fuzzed binaries.Nick Clifton1-0/+1
PR binutils/17512 * objdump.c (free_debug_section): Reset the compress_status as well. * compress.c (bfd_get_full_section_contents): Fail if there are no section contents available when the compress_status is COMPRESS_SECTION_DONE. * libbfd.c (bfd_malloc): Refuse to allocate a negative size. (bfd_malloc2): Use bfd_malloc. (bfd_realloc): Refuse to reallocate a negative size. (bfd_realloc2): Use bfd_realloc. (bfd_realloc_or_free): Use bfd_realloc. (bfd_zmalloc): Use bfd_malloc. (bfd_zmalloc): Use bfd_malloc2. * opncls.c (bfd_alloc): Refuse to allocate a negative size.
2014-12-01More fixes for memory access violations exposed by fuzzed binaries.Nick Clifton1-0/+17
PR binutils/17512 * dwarf.h (struct dwarf_section): Add user_data field. * dwarf.c (frame_need_space): Check for an over large register number. (display_debug_frames): Check the return value from frame_need_space. Check for a CFA expression that is so long the start address wraps around. (debug_displays): Initialise the user_data field. * objdump.c (load_specific_debug_section): Save the BFD section pointer in the user_data field of the dwarf_section structure. (free_debug_section): Update BFD section data when freeing section contents. * readelf.c (load_specific_debug_section): Initialise the user_data field. * archive.c (do_slurp_coff_armap): Add range checks to prevent running off the end of the string table. * compress.c (bfd_get_full_section_contents): Return a NULL pointer for zero sized sections. Do not attempt to copy a buffer onto itself. * elf-attrs.c (_bfd_elf_parse_attributes): Check for an empty header. Add range checks to avoid running off the end of the section. * elf.c (bfd_elf_get_str_section): Seek before allocating so that if the seek fails, no memory is allocated. (bfd_elf_string_from_elf_section): Do not allocate a string from a non string section. It only leads to trouble later on. (_bfd_elf_print_private_bfd_data): Check for there being too little external dynamic data. (bfd_section_from_shdr): Replace assertion with a failure mode. (bfd_section_from_shdr): When walking a loaded group section use the internal structure size, not the external size. Check for the group section being empty. * elf32-i386.c (elf_i386_rtype_to_howto): Replace assertion with a failure mode. * elfcode.h (elf_slurp_reloc_table): Likewise. * reloc.c (bfd_perform_relocation): Avoid seg-fault if the howto parameter is NULL.
2014-11-25Use get_symbol_version_string in BFD_JUMP_TABLE_SYMBOLSH.J. Lu1-3/+1
This patch adds get_symbol_version_string to BFD_JUMP_TABLE_SYMBOLS so that we can use bfd_get_symbol_version_string in objdump for non-ELF targets. bfd/ * targets.c (BFD_JUMP_TABLE_SYMBOLS): Use NAME##_get_symbol_version_string. (bfd_get_symbol_version_string): New. * aout-adobe.c (aout_32_get_symbol_version_string): Define using _bfd_nosymbols define. * aout-target.h (MY_get_symbol_version_string): Likewise. * aout-tic30.c (MY_get_symbol_version_string): Likewise. * binary.c (binary_get_symbol_version_string): Likewise. * bout.c (aout_32_get_symbol_version_string): Likewise. * coff-rs6000.c (_bfd_xcoff_get_symbol_version_string): Likewise. * i386msdos.c (msdos_get_symbol_version_string): Likewise. * i386os9k.c (aout_32_get_symbol_version_string): Likewise. * ieee.c (ieee_get_symbol_version_string): Likewise. * ihex.c (ihex_get_symbol_version_string): Likewise. * libecoff.h (_bfd_ecoff_get_symbol_version_string): Likewise. * mach-o-target.c (bfd_mach_o_get_symbol_version_string): Likewise. * mmo.c (mmo_get_symbol_version_string): Likewise. * nlm-target.h (nlm_get_symbol_version_string): Likewise. * oasys.c (oasys_get_symbol_version_string): Likewise. * pef.c (bfd_pef_get_symbol_version_string): Likewise. * plugin.c (bfd_plugin_get_symbol_version_string): Likewise. * ppcboot.c (ppcboot_get_symbol_version_string): Likewise. * som.c (som_get_symbol_version_string): Likewise. * srec.c (srec_get_symbol_version_string): Likewise. * tekhex.c (tekhex_get_symbol_version_string): Likewise. * versados.c (versados_get_symbol_version_string): Likewise. * vms-alpha.c (alpha_vms_get_symbol_version_string): Likewise. * xsym.c (bfd_sym_get_symbol_version_string): Likewise. * coff64-rs6000.c (rs6000_xcoff64_vec): Use coff_get_symbol_version_string. (rs6000_xcoff64_aix_vec): Likewise. * elf-bfd.h (bfd_elf_get_symbol_version_string): Renamed to ... (_bfd_elf_get_symbol_version_string): This. * elf.c: Likewise. (bfd_elf_print_symbol): Updated. * elfxx-target.h (bfd_elfNN_get_symbol_version_string): Define. * libbfd-in.h (_bfd_nosymbols_get_symbol_version_string): Define. * libcoff-in.h (coff_get_symbol_version_string): Likewise. * bfd-in2.h: Regenerated. * libbfd.h: Likewise. * libcoff.h: Likewise. binutils/ * objdump.c (objdump_print_symname): Replace bfd_elf_get_symbol_version_string with bfd_get_symbol_version_string.
2014-11-25Display symbol version when dumping dynrelocsH.J. Lu1-3/+20
Both readelf/objdump know how to get symbol version string for dynamic symbols. This patch extracts this functionality into a separate function and uses it to add symbol version string to versioned symbol names when dumping dynamic relocations. bfd/ PR binutils/16496 * elf-bfd.h (bfd_elf_get_symbol_version_string): New. * elf.c (bfd_elf_get_symbol_version_string): New. Extracted from bfd_elf_print_symbol. (bfd_elf_print_symbol): Use it. binutils/ PR binutils/16496 * objdump.c (objdump_print_symname): Call bfd_elf_get_symbol_version_string to get ELF symbol version string. Append version string if needed. * readelf.c (versioned_symbol_info): New enum. (get_symbol_version_string): New. Extracted from process_symbol_table. (dump_relocations): Add a new argument to indicate if dynamic symbol table is used. Use get_symbol_version_string to get symbol version string for dynamic symbol. Append version string if needed. (process_relocs): Updated dump_relocations call. (process_symbol_table): Use get_symbol_version_string. ld/testsuite/ PR binutils/16496 * ld-cris/weakref3.d: Add symbol version string to versioned symbol names in dynamic relocation. * ld-cris/weakref4.d: Likewise. * ld-elfvers/vers24.rd: Likewise. * ld-elf/pr16496a.c: New file. * ld-elf/pr16496a.map: Likewise. * ld-elf/pr16496b.c: Likewise. * ld-elf/pr16496b.od: Likewise. * ld-elf/shared.exp (build_tests): Add libpr16496a.so and libpr16496b.so tests.
2014-11-12Fix more memory faults uncovered by fuzzing various executables.Nick Clifton1-4/+12
PR binutils/17512 * dwarf.c (read_and_display_attr_value): Check that we do not read past end. (display_debug_pubnames_worker): Add range checks. (process_debug_info): Check for invalid pointer sizes. (display_loc_list): Likewise. (display_loc_list_dwo): Likewise. (display_debug_ranges): Likewise. (display_debug_aranges): Check for invalid address size. (read_cie): Add range checks. Replace call strchr with while loop. * objdump.c (dump_dwarf): Replace abort with a warning message. (print_section_stabs): Improve range checks. * rdcoff.c (coff_get_slot): Use long for indx parameter type. Add check for an excesively large index. * rddbg.c (read_section_stabs_debugging_info): Zero terminate the string table. Avoid walking off the end of the stabs data. * stabs.c (parse_stab_string): Add check for a NULL name. PR binutils/17512 * coffcode.h (coff_slurp_line_table): Set the line number of corrupt entries to -1. (coff_slurp_symbol_table): Alway initialise the value of the symbol. * coffgen.c (coff_print_symbol): Check that the combined pointer is valid. (coff_print_symbol): Do not print negative line numbers. * peXXigen.c (pe_print_idata): Add range checking displaying member names.
2014-11-03More fixes for buffer overruns instigated by corrupt binaries.Nick Clifton1-2/+9
PR binutils/17512 * objdump.c (slurp_symtab): Fail gracefully if the table could not be read. (dump_relocs_in_section): Likewise. * aoutx.h (slurp_symbol_table): Check that computed table size is not bigger than the file from which is it being read. (slurp_reloc_table): Likewise. * coffcode.h (coff_slurp_line_table): Remove unneeded local 'warned'. Do not try to print the details of a symbol with an invalid index. * coffgen.c (make_a_sectiobn_from_file): Check computed string index against length of string table. (bfd_coff_internal_syment_name): Check read in string offset against length of string table. (build_debug_section): Return a pointer to the section used. (_bfd_coff_read_string_table): Store the length of the string table in the coff_tdata structure. (bfd_coff_free_symbols): Set the length of the string table to zero when it is freed. (coff_get_normalized_symtab): Check offsets against string table or data table lengths as appropriate. * cofflink.c (_bfd_coff_link_input_bfd): Check offset against length of string table. * compress.c (bfd_get_full_section_contents): Check computed size against the size of the file. * libcoff-in.h (obj_coff_strings_len): Define. (struct coff_tdata): Add strings_len field. * libcoff.h: Regenerate. * peXXigen.c (pe_print_debugdata): Do not attempt to print the data if the debug section is too small. * xcofflink.c (xcoff_link_input_bfd): Check offset against length of string table.
2014-08-22aarch64: Decode dwarf2 register numbersRichard Henderson1-0/+4
* dwarf.h (init_dwarf_regnames_aarch64): Declare. * dwarf.c (dwarf_regnames_aarch64): New. (init_dwarf_regnames_aarch64): New. (init_dwarf_regnames): Call it. * objdump.c (dump_dwarf): Likewise.
2014-07-01Reorganise struct bfdAlan Modra1-1/+0
for better packing. Removes a field and a flag that are never set. bfd/ * bfd.c (struct bfd): Reorganise for better packing. Delete "ifd" field. Make "format", "direction" and "flags" bitfields. (HAS_LOAD_PAGE): Delete, renumber following flags. * bfd-in2.h: Regenerate. * coff-tic4x.c: Remove HAS_LOAD_PAGE from extra flags in target vecs. binutils/ * objdump.c (dump_bfd_header): Don't print HAS_LOAD_PAGE.
2014-03-27objdump: set address of debug sections.Tristan Gingold1-1/+1
This patche fixes the values of FDE pc in output of objdump -Wf. They now match readelf ones. binutils/ * objdump.c (load_specific_debug_section): Set address of section.
2014-03-05Update copyright yearsAlan Modra1-1/+1
generated by cgit v1.1 at 2024-10-17 17:42:30 +0000