aboutsummaryrefslogtreecommitdiff
path: root/binutils/configure
AgeCommit message (Collapse)AuthorFilesLines
2022-07-22PR17122, OSX 10.9 build failureAlan Modra1-11/+1
sbrk hasn't been used in binutils/ or ld/ for quite some time (so the PR was fixed a while ago). Tidy up configury. PR 17122 binutils/ * configure.ac: Don't check for sbrk. * sysdep.h (sbrk): Don't supply fallback declaration. * config.in: Regenerate. * configure: Regenerate. ld/ * configure.ac: Don't check for sbrk. * config.in: Regenerate. * configure: Regenerate.
2022-07-09Regenerate with automake-1.15.1Alan Modra1-118/+103
Until we update the recommended versions of autoconf/automake, files should be regenerated with automake-1.15.1 and autoconf-2.69. That's not because we think those versions are golden, and newer versions are bad. It's simply because maintainers want to be able to update configury files without trouble, and if someone regenerates files with automake-1.16.5 then --enable-maintainer-mode builds will hit errors: checking that generated files are newer than configure... configure.ac:26: error: version mismatch. This is Automake 1.15.1, configure.ac:26: but the definition used by this AM_INIT_AUTOMAKE configure.ac:26: comes from Automake 1.16.5. You should recreate configure.ac:26: aclocal.m4 with aclocal and run automake again. WARNING: 'automake-1.15' is probably too old. Correcting this requires regenerating the files by hand.
2022-07-08Update version to 2.39.50 and regenerate filesNick Clifton1-113/+128
2022-03-25libtool.m4: fix the NM="/nm/over/here -B/option/with/path" caseNick Alcock1-7/+13
My previous nm patch handled all cases but one -- if the user set NM in the environment to a path which contained an option, libtool's nm detection tries to run nm against a copy of nm with the options in it: e.g. if NM was set to "nm --blargle", and nm was found in /usr/bin, the test would try to run "/usr/bin/nm --blargle /usr/bin/nm --blargle". This is unlikely to be desirable: in this case we should run "/usr/bin/nm --blargle /usr/bin/nm". Furthermore, as part of this nm has to detect when the passed-in $NM contains a path, and in that case avoid doing a path search itself. This too was thrown off if an option contained something that looked like a path, e.g. NM="nm -B../prev-gcc"; libtool then tries to run "nm -B../prev-gcc nm" which rarely works well (and indeed it looks to see whether that nm exists, finds it doesn't, and wrongly concludes that nm -p or whatever does not work). Fix all of these by clipping all options (defined as everything including and after the first " -") before deciding whether nm contains a path (but not using the clipped value for anything else), and then removing all options from the path-modified nm before looking to see whether that nm existed. NM=my-nm now does a path search and runs e.g. /usr/bin/my-nm -B /usr/bin/my-nm NM=/usr/bin/my-nm now avoids a path search and runs e.g. /usr/bin/my-nm -B /usr/bin/my-nm NM="my-nm -p../wombat" now does a path search and runs e.g. /usr/bin/my-nm -p../wombat -B /usr/bin/my-nm NM="../prev-binutils/new-nm -B../prev-gcc" now avoids a path search: ../prev-binutils/my-nm -B../prev-gcc -B ../prev-binutils/my-nm This seems to be all combinations, including those used by GCC bootstrap (which, before this commit, fails to bootstrap when configured --with-build-config=bootstrap-lto, because the lto plugin is now using --export-symbols-regex, which requires libtool to find a working nm, while also using -B../prev-gcc to point at the lto plugin associated with the GCC just built.) Regenerate all affected configure scripts. * libtool.m4 (LT_PATH_NM): Handle user-specified NM with options, including options containing paths.
2022-03-16binutils/readelf: build against msgpack, dump NT_AMDGPU_METADATA note contentsSimon Marchi1-3/+134
The AMDGPU HSA OS ABI (code object v3 and above) defines the NT_AMDGPU_METADATA ELF note [1]. The content is a msgpack object describing, among other things, the kernels present in the code object and how to call them. I think it would be useful for readelf to be able to display the content of those notes. msgpack is a structured format, a bit like JSON, except not text-based. It is therefore possible to dump the contents in human-readable form without knowledge of the specific layout of the note. Add configury to binutils to optionally check for the msgpack C library [2]. Add There is a new --with{,out}-msgpack configure flag, and the actual library lookup is done using pkg-config. If msgpack support is enabled, dumping a NT_AMDGPU_METADATA note looks like: $ readelf --notes amdgpu-code-object Displaying notes found in: .note Owner Data size Description AMDGPU 0x0000040d NT_AMDGPU_METADATA (code object metadata) { "amdhsa.kernels": [ { ".args": [ { ".address_space": "global", ".name": "out.coerce", ".offset": 0, ".size": 8, ".value_kind": "global_buffer", }, <snip> If msgpack support is disabled, dump the contents as hex, as is done with notes that are not handled in a special way. This allows one to decode the contents manually (maybe using a command-line msgpack decoder) if really needed. [1] https://llvm.org/docs/AMDGPUUsage.html#code-object-metadata [2] https://github.com/msgpack/msgpack-c/tree/c_master binutils/ChangeLog: * Makefile.am (readelf_CFLAGS): New. (readelf_LDADD): Add MSGPACK_LIBS. * Makefile.in: Re-generate. * config.in: Re-generate. * configure: Re-generate. * configure.ac: Add --with-msgpack flag and check for msgpack using pkg-config. * readelf.c: Include msgpack.h if HAVE_MSGPACK. (print_note_contents_hex): New. (print_indents): New. (dump_msgpack_obj): New. (dump_msgpack): New. (print_amdgpu_note): New. (process_note): Handle NT_AMDGPU_METADATA note contents. Use print_note_contents_hex. Change-Id: Ia60a654e620bc32dfdb1bccd845594e2af328b84
2022-01-23Regenerate configure files with autoconf 2.69H.J. Lu1-15/+3
Regenerate configure files with the unmodified autoconf 2.69 to remove --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] bfd/ * configure: Regenerate. binutils/ * configure: Regenerate. gas/ * configure: Regenerate. gold/ * configure: Regenerate. gprof/ * configure: Regenerate. ld/ * configure: Regenerate. opcodes/ * configure: Regenerate.
2022-01-22Change version number to 2.38.50 and regenerate filesNick Clifton1-13/+25
2021-11-29binutils: merge doc subdir up a levelMike Frysinger1-2/+1
This avoids a recursive make into the doc subdir and speeds up the build slightly. It also allows for more parallelism.
2021-11-29binutils: enable silent build rulesMike Frysinger1-2/+41
Also add $(AM_V_xxx) to various manual rules in here.
2021-09-27configure: regenerate in all projects that use libtool.m4Nick Alcock1-45/+46
(including sim/, which has no changelog.) bfd/ChangeLog 2021-09-27 Nick Alcock <nick.alcock@oracle.com> * configure: Regenerate. binutils/ChangeLog 2021-09-27 Nick Alcock <nick.alcock@oracle.com> * configure: Regenerate. gas/ChangeLog 2021-09-27 Nick Alcock <nick.alcock@oracle.com> * configure: Regenerate. gprof/ChangeLog 2021-09-27 Nick Alcock <nick.alcock@oracle.com> * configure: Regenerate. ld/ChangeLog 2021-09-27 Nick Alcock <nick.alcock@oracle.com> * configure: Regenerate. libctf/ChangeLog 2021-09-27 Nick Alcock <nick.alcock@oracle.com> * configure: Regenerate. * Makefile.in: Regenerate. opcodes/ChangeLog 2021-09-27 Nick Alcock <nick.alcock@oracle.com> * configure: Regenerate. zlib/ChangeLog 2021-09-27 Nick Alcock <nick.alcock@oracle.com> * configure: Regenerate.
2021-09-02Add support for the haiku operating system. These are the os support ↵Alexander von Gluck IV1-1/+1
patches we have been grooming and maintaining for quite a few years over on git.haiku-os.org. All of these architectures are working and most have been stable for quite some time.
2021-07-21Remove `netbsdpe` supportJohn Ericson1-1/+1
netbsdpe was deprecated in c2ce831330e10dab4703094491f80b6b9a5c2289. Since then, a release has passed (2.37), and it was marked obselete in 5c9cbf07f3f972ecffe13d858010b3179df17b32. Unless I am mistaken, that means we can now remove support altogether. All branches in the "active" code are remove, and the target is additionally marked as obsolete next to the other removed ones for libbfd and gdb. Per [1] from the NetBSD toolchain list, PE/COFF support was removed a decade ago. Furthermore, the sole mention of this target in the binutils commit history was in 2002. Together, I'm led to believe this target hasn't seen much attention in quite a while. [1]: https://mail-index.netbsd.org/tech-toolchain/2021/06/16/msg003996.html bfd/ * config.bfd: Remove netbsdpe entry. binutils/ * configure.ac: Remove netbsdpe entry. * testsuite/lib/binutils-common.exp (is_pecoff_format): Likewise. * configure: Regenerate. gas/ * configure.tgt: Remove netbsdpe entry. gdb/ * configure.tgt: Add netbsdpe to removed targets. ld/ * configure.tgt: Remove netbsdpe entry. * testsuite/ld-bootstrap/bootstrap.exp: Likewise.
2021-07-07Check for strnlen declaration to fix Solaris 10 buildRainer Orth1-0/+10
binutils currently fails to compile on Solaris 10: /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c: In function 'bfd_get_debug_link_info_1': /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c:1231:16: error: implicit declaration of function 'strnlen' [-Werror=implicit-function-declaration] 1231 | crc_offset = strnlen (name, size) + 1; | ^~~~~~~ /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c:1231:16: error: incompatible implicit declaration of built-in function 'strnlen' [-Werror] /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c: In function 'bfd_get_alt_debug_link_info': /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c:1319:20: error: incompatible implicit declaration of built-in function 'strnlen' [-Werror] 1319 | buildid_offset = strnlen (name, size) + 1; | ^~~~~~~ and in a couple of other places. The platform lacks strnlen, and while libiberty.h can provide a fallback declaration, the necessary configure test isn't run. Fixed with the following patch. Tested on i386-pc-solaris2.10. 2021-07-06 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE> bfd: * configure.ac: Check for strnlen declaration. * configure, config.in: Regenerate. binutils: * configure.ac: Check for strnlen declaration. * configure, config.in: Regenerate.
2021-07-03Update version number and regenerate filesNick Clifton1-10/+10
2021-04-15PR27725, better objcopy -p timesAlan Modra1-22/+160
Nanosecond rather than second resolution. PR 27725 * configure.ac: Check for sys/time.h and utimensat. Use standard checks for mkstemp and mkdtemp. Whitespace. Check for nanosecond members of struct stat. * rename.c: Prefer sys/time.h for utimes over utime.h for utime. (STAT_TIMESPEC, STAT_TIMESPEC_NS): Define (get_stat_atime_ns, get_stat_mtime_ns): New inline functions. (get_stat_atime, get_stat_mtime): Likewise. (set_times): Choose first available of utimensat, utimes, utime. Use above inline functions to set timespec and timeval values. * configure: Regenerate. * config.in: Regenerate. * testsuite/binutils-all/objcopy.exp (objcopy_test): Add test of file timestamp when --preserve-dates is used.
2021-04-14PR27716, build failure for msdosdjgpp: PATH_MAX undeclaredAlan Modra1-1/+1
We shouldn't be using arbitrary limits like PATH_MAX in GNU programs. This patch also fixes some memory leaks in readelf when processing separate debug info. PR 27716 binutils/ * objdump.c (show_line): Don't limit paths to PATH_MAX. * readelf.c (struct filedata): Change program_interpreter from a char array to a char pointer. (process_program_headers): Sanity check PT_INTERP p_filesz. Malloc program_interpreter using p_filesz and read directly from file. (process_dynamic_section): Check program_interpreter is non-NULL. (free_filedata): New function, split out from.. (process_object): ..here. (close_debug_file): Call free_filedata. * sysdep.h: Don't include sys/param.h. (PATH_MAX): Don't define. * configure.ac: Don't check for sys/param.h. * configure: Regenerate. gprof/ * gprof.h (PATH_MAX): Don't define. * corefile.c (core_create_line_syms): Don't use PATH_MAX for initial file name size. * source.c (annotate_source): Malloc file name buffer. Always trim off "-ann" when dos 8.3 annotate file matches original. * utils.c (print_name_only): Malloc file name buffer.
2021-04-13ENABLE_CHECKING in bfd, opcodes, binutils, ldAlan Modra1-2/+20
gas already has this. Here it enables checking hash table type passed to elf_link_hash_lookup and elf_link_hash_traverse. bfd/ * elf-bfd.h (ENABLE_CHECKING): Define. (elf_link_hash_lookup): Abort if wrong type of hash table. (elf_link_hash_traverse): Likewise. * configure.ac (--enable-checking): Add support. * config.in: Regenerate. * configure: Regenerate. binutils/ * configure.ac (--enable-checking): Add support. * config.in: Regenerate. * configure: Regenerate. ld/ * configure.ac (--enable-checking): Add support. * config.in: Regenerate. * configure: Regenerate. opcodes/ * configure.ac (--enable-checking): Add support. * config.in: Regenerate. * configure: Regenerate.
2021-04-05C99 binutils configuryAlan Modra1-1588/+523
* configure.ac: Assume long long is available. Don't test for strings.h, stdlib.h, limits.h, locale.h, or wchar.h. Check inttypes.h, stdint.h, sys/stat.h and sys/types.h. Don't check for strcoll, setlocale, setmode or location of time_t. Don't check for fprintf, getenv, snprintf, strnlen, strstr or vsnprintf decls. (AC_ISC_POSIX, AXC_HEADER_STRING, AC_FUNC_ALLOCA): Don't invoke. * sysdep.h: Don't include alloca-conf.h, include config.h instead. Test HAVE_SYS_TYPES_H and reorder includes. Include limits.h, locale.h, string.h and stdlib.h unconditionally. Remove various fallback declarations. Assume long long is available. * addr2line.c: Don't test HAVE_SETLOCALE. * ar.c: Likewise. * coffdump.c: Likewise. * dlltool.c: Likewise. * dllwrap.c: Likewise. * elfedit.c: Likewise. * nm.c: Likewise. * objcopy.c: Likewise. * objdump.c: Likewise. * readelf.c: Likewise. * size.c: Likewise. * srconv.c: Likewise. * strings.c: Likewise. * sysdump.c: Likewise. * windmc.c: Likewise. * windres.c: Likewise. * bucomm.c: Don't test HAVE_TIME_T_IN_TIME_H or HAVE_TIME_T_IN_TYPES_H. * dwarf.c: Include limits.h unconditionally. Assume long long is available. * nm.c: Don't test HAVE_STRCOLL. * readelf.c: Don't test HAVE_WCHAR_H. * strings.c: Assume long long is available. * syslex.l: Include string.h unconditionally. * aclocal.m4: Regenerate. * config.in: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate.
2021-02-12Change the readelf and objdump programs so that they will automatically ↵Nick Clifton1-2/+27
follow links to separate debug info files. * configure.ac (follow-debug-links): Add option to enable or disable the following of debug links by default. Set the default for the option to be 'follow'. * dwarf.c (do_follow_links): Initialise with DEFAULT_FOR_FOLLOW_LINKS. (dwarf_select_sections_by_names): Add no-follow-links option. (dwarf_select_sections_by_letter): Add 'N' option. * objdump.c (usage): Add conditional text describing the follow links option. (slurp_symtab): Ensure that there is a NULL entry at the end of the symbol table. (slurp_dynamic_symtab): Likewise. (dump_bfd): When extending the symbol table, ensure that there is still a NULL entry at the end. * readelf.c (usage): Add conditional text describing the follow links option. * doc/binutils.texi: Update documentation for objcopy and readelf. * doc/debug.options.texi: Update documentation of the follow-links option. * config.in: Regenerate. * configure: Regenerate. * testsuite/binutils-all/compress.exp: Add the -WN option to objdump command lines that are not expecting to follow links. * testsuite/binutils-all/readelf.exp: Add the --debug-dump=no-follow-links option to tests that are not expecting to follow debug links. gas * testsuite/gas/mach-o/sections-1.d: Stop automatic debug link following. * testsuite/gas/xgate/insns-dwarf2.d: Likewise. ld * testsuite/ld-elf/sec64k.exp: Stop readelf from automatically following debug links.
2021-01-12Implement a workaround for GNU mak jobserverH.J. Lu1-0/+18
Compiling binutils using -flto=jobserver with GCC 11 leads to libtool: link: gcc -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Wstack-usage=262144 -Wwrite-strings -I../../gas/../zlib -g -O2 -fprofile-generate -flto=jobserver -o as-new app.o as.o atof-generic.o compress-debug.o cond.o depend.o dwarf2dbg.o dw2gencfi.o ecoff.o ehopt.o expr.o flonum-copy.o flonum-konst.o flonum-mult.o frags.o hash.o input-file.o input-scrub.o listing.o literal.o macro.o messages.o output-file.o read.o remap.o sb.o stabs.o subsegs.o symbols.o write.o config/tc-i386.o config/obj-elf.o config/atof-ieee.o ../opcodes/.libs/libopcodes.a ../bfd/.libs/libbfd.a -L/tmp/binutils-gdb/objdir/zlib -lz ../libiberty/libiberty.a -ldl lto-wrapper: warning: jobserver is not available: '--jobserver-auth=' is not present in 'MAKEFLAGS' since the '+' is missing on the recipe line in Makefiles generated by automake. Add the '+' to the recipe line by hand. bfd/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. binutils/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. config/ PR binutils/26792 * jobserver.m4: New file. gas/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. gprof/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. ld/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. libctf/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. opcodes/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise.
2021-01-11Binutils: Check if AR works with --plugin and rcH.J. Lu1-3/+11
Check if AR works with --plugin and rc before passing --plugin to AR and RANLIB. bfd/ PR ld/27173 binutils/ PR ld/27173 * configure: Regenerated. gas/ PR ld/27173 * configure: Regenerated. gprof/ PR ld/27173 * configure: Regenerated. ld/ PR ld/27173 * configure: Regenerated. libctf/ PR ld/27173 * configure: Regenerated. opcodes/ PR ld/27173 * configure: Regenerated.
2021-01-09Binutils: Pass --plugin to AR and RANLIBH.J. Lu1-2/+25
Detect GCC LTO plugin. Pass --plugin to AR and RANLIB to support LTO build. bfd/ * configure: Regenerated. binutils/ * configure: Regenerated. gas/ * configure: Regenerated. gprof/ * configure: Regenerated. ld/ * configure: Regenerated. libctf/ * configure: Regenerated. opcodes/ * configure: Regenerated.
2021-01-09Change version number to 2.36.50 and regenerate filesNick Clifton1-10/+10
2021-01-09configure regenAlan Modra1-2/+2
commit f478212851 did the regen by hand, missed a change in ld/configure and didn't update line numbers. Fix that, and an old regen of ld/Makefile.in with the wrong automake. bfd/ * configure: Regenerate. binutils/ * configure: Regenerate. gas/ * configure: Regenerate. gprof/ * configure: Regenerate. ld/ * Makefile.in: Regenerate. * configure: Regenerate. libctf/ * configure: Regenerate. opcodes/ * configure: Regenerate. zlib/ * configure: Regenerate.
2021-01-07libtool.m4: update GNU/Hurd test from upstream. In upstream libtool, ↵Samuel Thibault1-11/+1
47a889a4ca20 ("Improve GNU/Hurd support.") fixed detection of shlibpath_overrides_runpath, thus avoiding unnecessary relink. This backports it. . * libtool.m4: Match gnu* along other GNU systems. */ChangeLog: * configure: Re-generate.
2020-11-20Add option to nm to change the characters displayed for ifunc symbols. Add ↵Nick Clifton1-8/+34
a configure time option to change the default characters. PR 22967 * nm.c (ifunc_type_chars): New variable. (long_options): Add --ifunc-chars. (print_symbol): Use ifunc_type_chars for ifunc symbols. (main): Handle the new option. * doc/binutils.texi: Document the new option. * configure.ac: Add --enable-f-for-ifunc-symbols option which changes the default symbol displayed by nm. * NEWS: Mention the new feature. * testsuite/binutils-all/nm.exp: Test the new feature. * config.in: Regenerate. * configure: Regenerate.
2020-07-30Unify Solaris procfs and largefile handlingRainer Orth1-11/+53
GDB currently doesn't build on 32-bit Solaris: * On Solaris 11.4/x86: In file included from /usr/include/sys/procfs.h:26, from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24: /usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment" #error "Cannot use procfs in the large file compilation environment" ^~~~~ * On Solaris 11.3/x86 there are several more instances of this. The interaction between procfs and large-file support historically has been a royal mess on Solaris: * There are two versions of the procfs interface: ** The old ioctl-based /proc, deprecated and not used any longer in either gdb or binutils. ** The `new' (introduced in Solaris 2.6, 1997) structured /proc. * There are two headers one can possibly include: ** <procfs.h> which only provides the structured /proc, definining _STRUCTURED_PROC=1 and then including ... ** <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based /proc, but provides structured /proc if _STRUCTURED_PROC == 1. * procfs and the large-file environment didn't go well together: ** Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit compilations when the large-file environment was active (_FILE_OFFSET_BITS == 64). ** In both Solaris 11.4 and Illumos, this restriction was lifted for structured /proc. So one has to be careful always to define _STRUCTURED_PROC=1 when testing for or using <sys/procfs.h> on Solaris. As the errors above show, this isn't always the case in binutils-gdb right now. Also one may need to disable large-file support for 32-bit compilations on Solaris. config/largefile.m4 meant to do this by wrapping the AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because it neglects the _STRUCTURED_PROC part. To make things even worse, since GCC 9 g++ predefines _FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to enable large-file support, this has no effect, breaking the gdb build. This patch addresses all this as follows: * All tests for the <sys/procfs.h> header are made with _STRUCTURED_PROC=1, the definition going into the various config.h files instead of having to make them (and sometimes failing) in the affected sources. * To cope with the g++ predefine of _FILE_OFFSET_BITS=64, -U_FILE_OFFSET_BITS is added to various *_CPPFLAGS variables. It had been far easier to have just #undef _FILE_OFFSET_BITS in config.h, but unfortunately such a construct in config.in is commented by config.status irrespective of indentation and whitespace if large-file support is disabled. I found no way around this and putting the #undef in several global headers for bfd, binutils, ld, and gdb seemed way more invasive. * Last, the applicability check in largefile.m4 was modified only to disable largefile support if really needed. To do so, it checks if <sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it doesn't, the disabling only happens if gdb exists in-tree and isn't disabled, otherwise (building binutils from a tarball), there's no conflict. What initially confused me was the check for $plugins here, which originally caused the disabling not to take place. Since AC_PLUGINGS does enable plugin support if <dlfcn.h> exists (which it does on Solaris), the disabling never happened. I could find no explanation why the linker plugin needs large-file support but thought it would be enough if gld and GCC's lto-plugin agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not enough: lto-plugin uses the simple-object interface from libiberty, which includes off_t arguments. So to fully disable large-file support would mean also disabling it in libiberty and its users: gcc and libstdc++-v3. This seems highly undesirable, so I decided to disable the linker plugin instead if large-file support won't work. The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to predefined _FILE_OFFSET_BITS=64). Also regtested on amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4), x86_64-pc-linux-gnu and i686-pc-linux-gnu. config: * largefile.m4 (ACX_LARGEFILE) <sparc-*-solaris*|i?86-*-solaris*>: Check for <sys/procfs.h> incompatilibity with large-file support on Solaris. Only disable large-file support and perhaps plugins if needed. Set, substitute LARGEFILE_CPPFLAGS if so. bfd: * bfd.m4 (BFD_SYS_PROCFS_H): New macro. (BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H. Don't define _STRUCTURED_PROC. (BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise. * elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define. * configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>. * configure, config.in: Regenerate. * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. binutils: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. * configure: Regenerate. gas: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. * configure: Regenerate. gdb: * proc-api.c (_STRUCTURED_PROC): Don't define. * proc-events.c: Likewise. * proc-flags.c: Likewise. * proc-why.c: Likewise. * procfs.c: Likewise. * Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * configure, config.in: Regenerate. gdbserver: * configure, config.in: Regenerate. gdbsupport: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>. * Makefile.in: Regenerate. * configure, config.in: Regenerate. gnulib: * configure.ac: Run ACX_LARGEFILE before gl_EARLY. * configure: Regenerate. gprof: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in: Regenerate. * configure: Regenerate. ld: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in: Regenerate. * configure: Regenerate.
2020-07-28PKG_CHECK_MODULES: Properly check if $pkg_cv_[]$1[]_LIBS worksH.J. Lu1-6/+8
There is no need to check $pkg_cv_[]$1[]_LIBS works if package check failed. config/ PR binutils/26301 * pkg.m4 (PKG_CHECK_MODULES): Use AC_TRY_LINK only if $pkg_failed = no. binutils/ PR binutils/26301 * configure: Regenerated. gdb/ PR binutils/26301 * configure: Regenerated.
2020-07-28PKG_CHECK_MODULES: Check if $pkg_cv_[]$1[]_LIBS worksH.J. Lu1-0/+22
It is quite normal to have headers without library on multilib OSes. Add AC_TRY_LINK to PKG_CHECK_MODULES to check if $pkg_cv_[]$1[]_LIBS works. config/ PR binutils/26301 * pkg.m4 (PKG_CHECK_MODULES): Add AC_TRY_LINK to check if $pkg_cv_[]$1[]_LIBS works. binutils/ PR binutils/26301 * configure: Regenerated. gdb/ PR binutils/26301 * configure: Regenerated.
2020-07-24config/debuginfod.m4: Use PKG_CHECK_MODULESAaron Merey1-105/+264
Use PKG_CHECK_MODULES to set debuginfod autoconf vars. Also add pkg.m4 to config/. ChangeLog: * config/debuginfod.m4: use PKG_CHECK_MODULES. * config/pkg.m4: New file. * configure: Rebuild. * configure.ac: Remove AC_DEBUGINFOD. ChangeLog/binutils: * Makefile.am: Replace LIBDEBUGINFOD with DEBUGINFOD_LIBS. * Makefile.in: Rebuild. * configure: Rebuild. * doc/Makefile.in: Rebuild. ChangeLog/gdb: * Makefile.in: Replace LIBDEBUGINFOD with DEBUGINFOD_LIBS. * configure: Rebuild.
2020-07-09Remove powerpc PE supportAlan Modra1-9/+0
Plus some leftover powerpc lynxos support. bfd/ * coff-ppc.c: Delete. * pe-ppc.c: Delete. * pei-ppc.c: Delete. * Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Remove PE PPC. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags): Remove PPCMAGIC code. (coff_write_object_contents): Remove PPC_PE code. * config.bfd: Move powerpcle-pe to removed targets. * configure.ac: Remove powerpc PE entries. * libcoff-in.h (ppc_allocate_toc_section): Delete. (ppc_process_before_allocation): Delete. * peXXigen.c: Remove POWERPC_LE_PE code and comments. * targets.c: Remove powerpc PE vectors. * po/SRC-POTFILES.in: Regenerate. * libcoff.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. binutils/ * dlltool.c: Remove powerpc PE support and comments. * configure.ac: Remove powerpc PE dlltool config. * configure: Regenerate. gas/ * config/obj-coff.h: Remove TE_PE support. * config/tc-ppc.c: Likewise. * config/tc-ppc.h: Likewise. * configure.tgt: Remove powerpc PE and powerpc lynxos. * testsuite/gas/cfi/cfi.exp (cfi-common-6): Remove powerpc PE condition. * testsuite/gas/macros/macros.exp: Don't xfail powerpc PE. include/ * coff/powerpc.h: Delete. ld/ * emulparams/ppcpe.sh: Delete. * scripttempl/ppcpe.sc: Delete. * emulparams/ppclynx.sh: Delete. * Makefile.am (ALL_EMULATION_SOURCES): Remove ppc PE and lynxos. * configure.tgt: Likewise. * emultempl/beos.em: Remove powerpc PE support. * emultempl/pe.em: Likewise. * po/BLD-POTFILES.in: Regenerate. * Makefile.in: Regenerate.
2020-07-04Update version to 2.35.50 and regenerate filesNick Clifton1-10/+10
2020-06-26binutils, ld: work with --disable-libctfNick Alcock1-2/+37
This unfortunately means conditionalizing out all the libctf code, but the result is not too unbearably ugly, if a bit repetitive. I have stubbed out code in the !ENABLE_LIBCTF path to avoid extra redundant ifdefs where it seems that might be helpful. (The stubs are not too disruptive, but I've tried to keep them on one line where possible to avoid filling up the screen with stubs that nobody would care about. If this is too much of a coding style violation I can change it.) Changes since v2: use GCC_ENABLE rather than repeating all the AC_ARG_ENABLE stuff over and over again. ld/ * configure.ac [--enable-libctf]: New, default yes. Set ENABLE_LIBCTF accordingly. * Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF. * configure: Regenerate. * config.in: Regenerate. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * ldlang.c (ctf_output): Conditionalize on ENABLE_LIBCTF. (ldlang_open_ctf): Likewise. (lang_merge_ctf): Likewise. (ldlang_ctf_apply_strsym): Likewise. (lang_write_ctf): Likewise. (ldlang_write_ctf_late): Likewise. (ldlang_open_ctf) [!ENABLE_LIBCTF]: Warn about the presence of CTF sections. (lang_merge_ctf) [!ENABLE_LIBCTF]: New stub. (ldlang_ctf_apply_strsym) [!ENABLE_LIBCTF]: Likewise. (lang_write_ctf) [!ENABLE_LIBCTF]: Likewise. (ldlang_write_ctf_late) [!ENABLE_LIBCTF]: Likewise. * ldelfgen.c (ldelf_emit_ctf_early): Conditionalize on ENABLE_LIBCTF. (struct ctf_strsym_iter_cb_arg): Likewise. (ldelf_ctf_strtab_iter_cb): Likewise. (ldelf_ctf_symbols_iter_cb): Likewise. (ldelf_examine_strtab_for_ctf): Likewise. (ldelf_emit_ctf_early) [!ENABLE_LIBCTF]: New stub. (ldelf_examine_strtab_for_ctf) [!ENABLE_LIBCTF]: New stub. binutils/ * configure.ac [--enable-libctf]: New, default yes. Set ENABLE_LIBCTF accordingly. * Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF and LIBCTF_NOBFD. * configure: Regenerate. * config.in: Regenerate. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * objdump.c (usage): Conditionalize portions on ENABLE_LIBCTF. (option_values): Likewise. (long_options): Likewise. (main): Likewise. (dump_ctf_indent_lines): Conditionalize out when !ENABLE_LIBCTF. (make_ctfsect): Likewise. (dump_ctf_archive_member): Likewise. (dump_ctf) [ENABLE_LIBCTF]: Likewise. (dump_ctf) [!ENABLE_LIBCTF]: New empty stub. * readelf.c (options): Conditionalize portions on ENABLE_LIBCTF. (usage): Likewise. (process_section_contents): Likewise. (shdr_to_ctf_sect): Conditionalize out when !ENABLE_LIBCTF. (dump_ctf_indent_lines): Likewise. (dump_section_as_ctf) [ENABLE_LIBCTF]: Likewise.
2020-02-19Merge changes from GCC for the config/ directoryAndrew Burgess1-8/+25
GCC's config/ChangeLog since the last time this merge was done (in the binutils-gdb commit 0b4d000cc4e8e77c823) is included at the end of this commit message. It is worth noting that the binutils-gdb commit 301a9420d947da1458 added the file config/debuginfod.m4 which is not present in GCC's config/ directory. This file is preserved, unmodified, after this commit. In order to regenerate all of the configure files, I configured with --enable-maintainer-mode, and built the 'all' target. I then did the same thing on a source tree without this patch, and only committed those files that changed when this patch was added. GCC's config/ChangeLog entries: 2020-02-12 Sandra Loosemore <sandra@codesourcery.com> PR libstdc++/79193 PR libstdc++/88999 * no-executables.m4: Use a non-empty program to test for linker support. 2020-02-01 Andrew Burgess <andrew.burgess@embecosm.com> * lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Update shell syntax. 2020-01-27 Andrew Burgess <andrew.burgess@embecosm.com> * lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Add new --with-libXXX-type=... option. Use this to guide the selection of either a shared library or a static library. 2020-01-24 Maciej W. Rozycki <macro@wdc.com> * toolexeclibdir.m4: New file. 2019-09-10 Christophe Lyon <christophe.lyon@st.com> * futex.m4: Handle *-uclinux*. * tls.m4 (GCC_CHECK_TLS): Likewise. 2019-09-06 Florian Weimer <fweimer@redhat.com> * futex.m4 (GCC_LINUX_FUTEX): Include <unistd.h> for the syscall function. 2019-07-08 Richard Sandiford <richard.sandiford@arm.com> * bootstrap-Og.mk: New file. 2019-06-25 Kwok Cheung Yeung <kcy@codesourcery.com> Andrew Stubbs <ams@codesourcery.com> * gthr.m4 (GCC_AC_THREAD_HEADER): Add case for gcn. 2019-05-30 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE> * ax_count_cpus.m4: New file. 2019-05-02 Richard Biener <rguenther@suse.de> PR bootstrap/85574 * bootstrap-lto.mk (extra-compare): Set to gcc/lto1$(exeext). 2019-04-16 Martin Liska <mliska@suse.cz> * bootstrap-lto-lean.mk: Filter out -flto in STAGEtrain_CFLAGS. 2019-04-09 Martin Liska <mliska@suse.cz> * bootstrap-lto-lean.mk: New file. 2019-03-02 Johannes Pfau <johannespfau@gmail.com> * mh-mingw: Also set __USE_MINGW_ACCESS flag for C++ code. 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * math.m4, tls.m4: Use AC_LANG_SOURCE. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. config/ChangeLog: * ax_count_cpus.m4: New file, backported from GCC. * bootstrap-Og.mk: New file, backported from GCC. * bootstrap-lto-lean.mk: New file, backported from GCC. * bootstrap-lto.mk: Changes backported from GCC. * futex.m4: Changes backported from GCC. * gthr.m4: Changes backported from GCC. * lib-link.m4: Changes backported from GCC. * mh-mingw: Changes backported from GCC. * no-executables.m4: Changes backported from GCC. * tls.m4: Changes backported from GCC. * toolexeclibdir.m4: New file, backported from GCC. binutils/ChangeLog: * configure: Regenerate. gdb/ChangeLog: * configure: Regenerate. gdbserver/ChangeLog: * configure: Regenerate. gdbsupport/ChangeLog: * configure: Regenerate. intl/ChangeLog: * configure: Regenerate. libiberty/ChangeLog: * configure: Regenerate. zlib/ChangeLog.bin-gdb: * configure: Regenerate.
2020-01-18Update version to 2.34.50. Regenerate configure and .pot files.Nick Clifton1-10/+10
2020-01-09Add support for debuginfod to the binutils (disable by default, enabled via ↵Aaron Merey1-48/+136
a configure time option). debuginfod is a lightweight web service that indexes ELF/DWARF debugging resources by build-id and serves them over HTTP. This patch enables objdump and readelf to query debuginfod servers when they are otherwise not able to find separate debug files. Binutils can be built with debuginfod using the --with-debuginfod configure option. This requires that libdebuginfod be installed and found at configure time. debuginfod is packaged with elfutils, starting with version 0.178. For more information see https://sourceware.org/elfutils/. toplevel* config/debuginfod.m4: New file. Add macro AC_DEBUGINFOD. Adds new configure option --with-debuginfod. * configure: Regenerate. * configure.ac: Call AC_DEBUGINFOD. binutils* Makefile.am (readelf_LDADD, objdump_LDADD): Add libdebuginfod. * Makefile.in: Regenerate. * NEWS: Update. * config.in: Regenerate. * configure: Regenerate. * configure.ac: Call AC_DEBUGINFOD. * doc/Makefile.in: Regenerate. * doc/binutils.texi: Add section on using binutils with debuginfod. * dwarf.c (debuginfod_fetch_separate_debug_info): New function. Query debuginfod servers for the target debug file. (load_separate_debug_info): Call debuginfod_fetch_separate_debug_info if configured with debuginfod. (load_separate_debug_files): Add file argument to load_separate_debug_info calls. * dwarf.h (get_build_id): Add declaration. * objdump.c (get_build_id): New function. Get build-id of file. * readelf.c (get_build_id): Likewise. * testsuite/binutils-all/debuginfod.exp: New tests. * testsuite/binutils-all/linkdebug.s: Add .note.gnu.build-id section.
2019-09-18Re-generate many configure and Makefile.in filesSimon Marchi1-22/+8
I get some spurious changes when running autoconf/automake for various projects in the tree. This is likely because they were generated using distro-patched tools last time. I ran `autoreconf -f` in the various automake projects of the binutils-gdb tree, and this is the result. The tools I am using have been compiled from source, from the upstream release. bfd/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gas/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gold/ChangeLog: * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. ld/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate. opcodes/ChangeLog: * Makefile.in: Re-generate. * configure: Re-generate.
2019-09-16Update version to 2.33.50 and regenerate configure scripts.Phil Blundell1-18/+32
2019-06-03Revert patch that disables building libctf for non-ELF based targets.Nick Clifton1-62/+2
Revert: binutls 2019-05-29 Nick Clifton <nickc@redhat.com> * configure.ac (LIBCTF): Export. Set to empty for non-ELF based targets. (HAVE_LIBCTF): Define if libctf support is available. * Makefile.am (LIBCTF): Set value to @LIBCTF@. * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being defined. * readelf.c: Likewise. * configure: Regenerate. * Makefile.in: Regenerate. * config.in: Regenerate. top 2019-05-29 Nick Clifton <nickc@redhat.com> * configure.ac (noconfigdirs): Add libctf if the target does not use the ELF file format. * configure: Regenerate.
2019-05-29Do not build libctf for targets that do not use the ELF file format.Nick Clifton1-2/+62
top * configure.ac (noconfigdirs): Add libctf if the target does not use the ELF file format. * configure: Regenerate. binutils* configure.ac (LIBCTF): Export. Set to empty for non-ELF based targets. (HAVE_LIBCTF): Define if libctf support is available. * Makefile.am (LIBCTF): Set value to @LIBCTF@. * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being defined. * readelf.c: Likewise. * configure: Regenerate. * Makefile.in: Regenerate. * config.in: Regenerate.
2019-01-19Change version to 2.32.51 and regenerate configure and pot files.Nick Clifton1-10/+10
2019-01-09Adjust bfd/warning.m4 egrep patternsAndrew Paprocki1-5/+5
Adjust the `bfd/warning.m4` `egrep` patterns to handle preprocessors that do not define `__GNUC__`, leaving the string in the output. bfd/ * warning.m4: Adjust egrep pattern for non-GNU compilers. * configure: Regenerate. binutils/ * configure: Regenerate. gas/ * configure: Regenerate. gold/ * configure: Regenerate. gprof/ * configure: Regenerate. ld/ * configure: Regenerate. opcodes/ * configure: Regenerate.
2018-11-09Fix a typo in iconv.m4.Hafiz Abid Qadeer1-1/+1
config/ 2018-11-09 Hafiz Abid Qadeer <abidh@codesourcery.com> * iconv.m4 (AM_ICONV_LINK): Don't overwrite CPPFLAGS. Append $INCICONV to it. gdb/ 2018-11-09 Hafiz Abid Qadeer <abidh@codesourcery.com> * configure: Regenerate. binutils/ 2018-11-09 Hafiz Abid Qadeer <abidh@codesourcery.com> * configure: Regenerate. intl/ 2018-11-09 Hafiz Abid Qadeer <abidh@codesourcery.com> * configure: Regenerate.
2018-11-02binutils: Add AC_FUNC_MMAP to configure.acH.J. Lu1-2/+207
Add AC_FUNC_MMAP to configure.ac so that HAVE_MMAP will be checked in objdump.c and mmap is used if available. * configure.ac (AC_FUNC_MMAP): New. * config.in: Regenerated. * configure: Likewise.
2018-06-24Regenerate configure and pot files with updated binutils version number.Nick Clifton1-10/+10
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi1-641/+971
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
2018-06-01Bump version number to 2.30.52H.J. Lu1-10/+10
Bump version number to 2.30.52 since _bfd_link_hide_symbol has been added to bfd_target. bfd/ * version.m4: Bump version to 2.30.52 * configure: Regenerated. binutils/ * configure: Regenerated. gas/ * configure: Regenerated. gprof/ * configure: Regenerated. ld/ * configure: Regenerated. opcodes/ * configure: Regenerated.
2018-04-16Remove arm-epoc-pe supportAlan Modra1-9/+0
bfd/ * Makefile.am: Remove arm-epoc-pe support. * coff-arm.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * epoc-pe-arm.c: Delete. * epoc-pei-arm.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * configure.ac: Remove arm-epoc-pe support. * dlltool.c: Likewise. * configure: Regenerate. gas/ * Makefile.am: Remove arm-epoc-pe support. * config/tc-arm.h: Likewise. * configure.tgt: Likewise. * testsuite/gas/all/gas.exp: Likewise. * testsuite/gas/arm/local_label_coff.d: Likewise. * testsuite/gas/arm/undefined.d: Likewise. * testsuite/gas/arm/undefined_coff.d: Likewise. * config/te-epoc-pe.h: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove arm-epoc-pe support. * configure.tgt: Likewise. * emultempl/pe.em: Likewise. * pe-dll.c: Likewise. * testsuite/ld-scripts/fill.d: Likewise. * testsuite/ld-scripts/fill16.d: Likewise. * emulparams/arm_epoc_pe.sh: Delete. * scripttempl/epocpe.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove netware supportAlan Modra1-29/+2
include/ * nlm/ChangeLog-9315: Delete. * nlm/alpha-ext.h: Delete. * nlm/common.h: Delete. * nlm/external.h: Delete. * nlm/i386-ext.h: Delete. * nlm/internal.h: Delete. * nlm/ppc-ext.h: Delete. * nlm/sparc32-ext.h: Delete. bfd/ * Makefile.am: Remove netware support. * bfd-in.h: Likewise. * bfd.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * doc/bfdint.texi: Likewise. * ecoff.c: Likewise. * targets.c: Likewise. * libnlm.h: Delete. * nlm-target.h: Delete. * nlm.c: Delete. * nlm32-alpha.c: Delete. * nlm32-i386.c: Delete. * nlm32-ppc.c: Delete. * nlm32-sparc.c: Delete. * nlm32.c: Delete. * nlm64.c: Delete. * nlmcode.h: Delete. * nlmswap.h: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * .gitignore: Remove netware support. * Makefile.am: Likewise. * configure.ac: Likewise. * doc/Makefile.am: Likewise. * doc/binutils.texi: Likewise. * testsuite/binutils-all/nm.exp: Likewise. * nlmconv.c: Delete. * nlmconv.h: Delete. * nlmheader.y: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/ * Makefile.am: Remove netware support. * config/tc-i386.c: Likewise. * configure.tgt: Likewise. * config/te-netware.h: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gprof/ * corefile.c: Remove netware support. ld/ * Makefile.am: Remove netware support. * configure.tgt: Likewise. * testsuite/ld-powerpc/powerpc.exp: Likewise. * emulparams/i386nw.sh: Delete. * emulparams/ppcnw.sh: Delete. * scripttempl/nw.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-05Use dlsym to check if libdl is needed for pluginH.J. Lu1-12/+12
config/plugins.m4 has if test "$plugins" = "yes"; then AC_SEARCH_LIBS([dlopen], [dl]) fi Plugin uses dlsym, but libasan.so only intercepts dlopen, not dlsym: [hjl@gnu-tools-1 binutils-text]$ nm -D /lib64/libasan.so.4| grep " dl" 0000000000038580 W dlclose U dl_iterate_phdr 000000000004dc50 W dlopen U dlsym U dlvsym [hjl@gnu-tools-1 binutils-text]$ Testing dlopen for libdl leads to false negative when -fsanitize=address is used. It results in link failure: ../bfd/.libs/libbfd.a(plugin.o): undefined reference to symbol 'dlsym@@GLIBC_2.16' dlsym should be used to check if libdl is needed for plugin. bfd/ PR gas/22318 * configure: Regenerated. binutils/ PR gas/22318 * configure: Regenerated. gas/ PR gas/22318 * configure: Regenerated. gprof/ PR gas/22318 * configure: Regenerated. ld/ PR gas/22318 * configure: Regenerated.
generated by cgit v1.1 at 2025-01-05 19:58:37 +0000