Age | Commit message (Collapse) | Author | Files | Lines |
|
Commit b69c9d41e8 edited bfd/Makefile.in rather than using automake,
which meant a typo in Makefile.am was not discovered and other
differences in Makefile.in are seen with a proper regeneration. One
difference was lack of an empty line between the pe-aarch64igen.c rule
and the following $(BFD32_LIBS) etc. dependency rule, in the
regenerated file. Not that it matters for proper "make" behaviour,
but it's nicer with a line between those rules. Moving the rule
earlier seems to cure the missing empty line.
* Makefile.am (BFD64_BACKENDS): Correct typo.
(BFD_H_DEPS, LOCAL_H_DEPS): Move earlier. Move rule using these
deps earlier too.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
|
|
https://sourceware.org/bugzilla/ everywhere
bfd/
* configure.ac (ACX_BUGURL): Set to https://sourceware.org/bugzilla/
* po/Make-in (msgid-bugs-address): Likewise.
* README: Report bugs to the above.
* configure: Regenerate.
binutils/
* po/Make-in (msgid-bugs-address): Update.
gas/
* README: Update bug address. Delete mention of gcc.
* po/Make-in: Update bug address.
gold/
* po/Make-in: Update bug address.
gprof/
* po/Make-in: Update bug address.
ld/
* po/Make-in: Update bug address.
opcodes/
* po/Make-in: Update bug address.
|
|
2021-10-22 Chenghua Xu <xuchenghua@loongson.cn>
Zhensong Liu <liuzhensong@loongson.cn>
Weinan Liu <liuweinan@loongson.cn>
bfd/
* Makefile.am: Add LoongArch.
* archures.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* cpu-loongarch.c: New.
* elf-bfd.h: Add LoongArch.
* elf.c: Add LoongArch elfcore_grok_xxx.
* elfnn-loongarch.c: New.
* elfxx-loongarch.c: New.
* elfxx-loongarch.h: New.
* reloc.c: Add LoongArch BFD RELOC ENUM.
* targets.c: Add LoongArch target.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
include/
* elf/common.h: Add NT_LARCH_{CPUCFG,CSR,LSX,LASX}.
* elf/loongarch.h: New.
|
|
As discussed previously, a.out support is now quite deprecated, and in
some cases removed, in both Binutils itself and NetBSD, so this legacy
default makes little sense. `netbsdelf*` and `netbsdaout*` still work
allowing the user to be explicit about there choice. Additionally, the
configure script warns about the change as Nick Clifton requested.
One possible concern was the status of NetBSD on NS32K, where only a.out
was supported. But per [1] NetBSD has removed support, and if it were to
come back, it would be with ELF. The binutils implementation is
therefore marked obsolete, per the instructions in the last message.
With that patch and this one applied, I have confirmed the following:
--target=i686-unknown-netbsd
--target=i686-unknown-netbsdelf
builds completely
--target=i686-unknown-netbsdaout
properly fails because target is deprecated.
--target=vax-unknown-netbsdaout builds completely except for gas, where
the target is deprecated.
[1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html
---
bfd/config.bfd | 43 +++++++++++++--------
bfd/configure.ac | 5 +--
binutils/testsuite/binutils-all/nm.exp | 2 +-
binutils/testsuite/lib/binutils-common.exp | 7 +---
config/picflag.m4 | 4 +-
gas/configure.tgt | 9 +++--
gas/testsuite/gas/arm/blx-bl-convert.d | 2 +-
gas/testsuite/gas/arm/blx-local-thumb.d | 2 +-
gas/testsuite/gas/sh/basic.exp | 2 +-
gdb/configure.host | 34 +++++++----------
gdb/configure.tgt | 2 +-
gdb/testsuite/gdb.asm/asm-source.exp | 6 +--
intl/configure | 2 +-
ld/configure.tgt | 44 +++++++++++-----------
ld/testsuite/ld-arm/arm-elf.exp | 4 +-
ld/testsuite/ld-elf/elf.exp | 2 +-
ld/testsuite/ld-elf/shared.exp | 4 +-
libiberty/configure | 4 +-
|
|
|
|
|
|
|
|
of a string.
PR 28051
gas * config/tc-i386.c (offset_in_range): Reformat error messages in
order to fix problems when translating.
(md_assemble): Likewise.
* messages.c (as_internal_value_out_of_range): Likewise.
* read.c (emit_expr_with_reloc): Likewise.
* testsuite/gas/all/overflow.l Change expected output format.
* po/gas.pot: Regenerate.
bfd * coff-rs6000.c (xcoff_reloc_type_tls): Reformat error messages in
order to fix problems when translating.
* cofflink.c (_bfd_coff_write_global_sym): Likewise.
* elfnn-aarch64.c (_bfd_aarch64_erratum_843419_branch_to_stub):
Likewise.
* po/bfd.pot: Regenerate.
|
|
2.37 branch.
|
|
|
|
If we require C99 for binutils then stdint.h is available.
bfd/
* .gitignore: Delete bfd_stdint.h entry.
* Makefile.am (bfdinclude_HEADERS): Delete bfd_stdint.h.
(BUILD_HFILES, LOCAL_H_DEPS): Likewise.
* bfd-in.h: Include stdint.h in place of bfd_stdint.h.
* configure.ac: Don't invoke GCC_HEADER_STDINT.
* configure.com: Don't create bfd_stdint.h.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* bfd-in2.h: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
binutils/
* coffdump.c: Include stdint.h in place of bfd_stdint.h.
* dwarf.c: Likewise.
gas/
* config/tc-aarch64.c: Include stdint.h in place of bfd_stdint.h.
* config/tc-crx.c: Likewise.
* config/tc-nds32.h: Likewise.
include/
* cgen/basic-modes.h: Include stdint.h in place of bfd_stdint.h.
* elf/nfp.h: Likewise.
* opcode/aarch64.h: Likewise.
* opcode/cgen.h: Likewise.
* opcode/nfp.h: Likewise.
* opcode/ppc.h: Likewise.
ld/
* elf-hints-local.h: Include stdint.h in place of bfd_stdint.h.
* emultempl/nds32elf.em: Likewise.
* testsuite/ld-elf/mbind2b.c: Likewise.
* testsuite/ld-elf/pr18718.c: Likewise.
* testsuite/ld-elf/pr18720a.c: Likewise.
* testsuite/ld-elf/pr25749-1.c: Likewise.
* testsuite/ld-elf/pr25749-1a.c: Likewise.
* testsuite/ld-elf/pr25749-1b.c: Likewise.
* testsuite/ld-elf/pr25749-1c.c: Likewise.
* testsuite/ld-elf/pr25749-1d.c: Likewise.
* testsuite/ld-elf/pr25749-2.c: Likewise.
* testsuite/ld-elf/pr25754-1a.c: Likewise.
* testsuite/ld-elf/pr25754-2a.c: Likewise.
* testsuite/ld-elf/pr25754-3a.c: Likewise.
* testsuite/ld-elf/pr25754-4a.c: Likewise.
* testsuite/ld-elf/pr25754-5a.c: Likewise.
* testsuite/ld-elf/pr25754-6a.c: Likewise.
opcodes/
* aarch64-dis.c: Include stdint.h in place of bfd_stdint.h.
* aarch64-dis.h: Likewise.
* aarch64-opc.c: Likewise.
* avr-dis.c: Likewise.
* csky-dis.c: Likewise.
* nds32-asm.c: Likewise.
* nds32-dis.c: Likewise.
* nfp-dis.c: Likewise.
* riscv-dis.c: Likewise.
* s12z-dis.c: Likewise.
* wasm32-dis.c: Likewise.
|
|
Make the opcode/riscv-opc.c and include/opcode/riscv.h tidy, move the
spec versions stuff to bfd/cpu-riscv.h. Also move the csr stuff and
ext_version_table to gas/config/tc-riscv.c for internal use. To avoid
too many repeated code, define general RISCV_GET_SPEC_NAME/SPEC_CLASS
macros. Therefore, assembler/dis-assembler/linker/gdb can get all spec
versions related stuff from cpu-riscv.h and cpu-riscv.c, since the stuff
are defined there uniformly.
bfd/
* Makefile.am: Added cpu-riscv.h.
* Makefile.in: Regenerated.
* po/SRC-POTFILES.in: Regenerated.
* cpu-riscv.h: Added to support spec versions controlling.
Also added extern arrays and functions for cpu-riscv.c.
(enum riscv_spec_class): Define all spec classes here uniformly.
(struct riscv_spec): Added for all specs.
(RISCV_GET_SPEC_CLASS): Added to reduce repeated code.
(RISCV_GET_SPEC_NAME): Likewise.
(RISCV_GET_ISA_SPEC_CLASS): Added to get ISA spec class.
(RISCV_GET_PRIV_SPEC_CLASS): Added to get privileged spec class.
(RISCV_GET_PRIV_SPEC_NAME): Added to get privileged spec name.
* cpu-riscv.c (struct priv_spec_t): Replaced with struct riscv_spec.
(riscv_get_priv_spec_class): Replaced with RISCV_GET_PRIV_SPEC_CLASS.
(riscv_get_priv_spec_name): Replaced with RISCV_GET_PRIV_SPEC_NAME.
(riscv_priv_specs): Moved below.
(riscv_get_priv_spec_class_from_numbers): Likewise, updated.
(riscv_isa_specs): Moved from include/opcode/riscv.h.
* elfnn-riscv.c: Included cpu-riscv.h.
(riscv_merge_attributes): Initialize in_priv_spec and out_priv_spec.
* elfxx-riscv.c: Included cpu-riscv.h and opcode/riscv.h.
(RISCV_UNKNOWN_VERSION): Moved from include/opcode/riscv.h.
* elfxx-riscv.h: Removed extern functions to cpu-riscv.h.
gas/
* config/tc-riscv.c: Included cpu-riscv.h.
(enum riscv_csr_clas): Moved from include/opcode/riscv.h.
(struct riscv_csr_extra): Likewise.
(struct riscv_ext_version): Likewise.
(ext_version_table): Moved from opcodes/riscv-opc.c.
(default_isa_spec): Updated type to riscv_spec_class.
(default_priv_spec): Likewise.
(riscv_set_default_isa_spec): Updated.
(init_ext_version_hash): Likewise.
(riscv_init_csr_hash): Likewise, also fixed indent.
include/
* opcode/riscv.h: Moved stuff and make the file tidy.
opcodes/
* riscv-dis.c: Included cpu-riscv.h, and removed elfxx-riscv.h.
(default_priv_spec): Updated type to riscv_spec_class.
(parse_riscv_dis_option): Updated.
* riscv-opc.c: Moved stuff and make the file tidy.
|
|
|
|
|
|
|
|
number.
bfd * po/es.po: Fix printf format
binutils * windmc.c: Fix printf format
gas * config/tc-arc.c: Fix printf format
opcodes * po/es.po: Fix printf format
sim * arm/armos.c: Fix printf format
* ppc/emul_netbsd.c: Fix printf format
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
|
|
|
|
Plus some leftover powerpc lynxos support.
bfd/
* coff-ppc.c: Delete.
* pe-ppc.c: Delete.
* pei-ppc.c: Delete.
* Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Remove PE PPC.
* coffcode.h (coff_set_arch_mach_hook, coff_set_flags): Remove
PPCMAGIC code.
(coff_write_object_contents): Remove PPC_PE code.
* config.bfd: Move powerpcle-pe to removed targets.
* configure.ac: Remove powerpc PE entries.
* libcoff-in.h (ppc_allocate_toc_section): Delete.
(ppc_process_before_allocation): Delete.
* peXXigen.c: Remove POWERPC_LE_PE code and comments.
* targets.c: Remove powerpc PE vectors.
* po/SRC-POTFILES.in: Regenerate.
* libcoff.h: Regenerate.
* Makefile.in: Regenerate.
* configure: Regenerate.
binutils/
* dlltool.c: Remove powerpc PE support and comments.
* configure.ac: Remove powerpc PE dlltool config.
* configure: Regenerate.
gas/
* config/obj-coff.h: Remove TE_PE support.
* config/tc-ppc.c: Likewise.
* config/tc-ppc.h: Likewise.
* configure.tgt: Remove powerpc PE and powerpc lynxos.
* testsuite/gas/cfi/cfi.exp (cfi-common-6): Remove powerpc PE
condition.
* testsuite/gas/macros/macros.exp: Don't xfail powerpc PE.
include/
* coff/powerpc.h: Delete.
ld/
* emulparams/ppcpe.sh: Delete.
* scripttempl/ppcpe.sc: Delete.
* emulparams/ppclynx.sh: Delete.
* Makefile.am (ALL_EMULATION_SOURCES): Remove ppc PE and lynxos.
* configure.tgt: Likewise.
* emultempl/beos.em: Remove powerpc PE support.
* emultempl/pe.em: Likewise.
* po/BLD-POTFILES.in: Regenerate.
* Makefile.in: Regenerate.
|
|
|
|
|
|
|
|
bfd/
* aout-tic30.c: Delete file.
* Makefile.am (BFD32_BACKENDS): Remove aout-tic30.lo.
(BFD32_BACKENDS_CFILES): Remove aout-tic30.c.
* config.bfd (c30-*-*aout*, tic30-*-*aout*): Remove entry.
(xc16x-*-elf): Sort properly.
* configure.ac: Remove tic30_aout_vec.
* targets.c: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
gas/
* config/tc-tic30.h: Remove OBJ_AOUT support.
* configure.tgt: Delete tic30-*-*aout* entry.
ld/
* emulparams/tic30aout.sh: Delete file.
* scripttempl/tic30aout.sc: Delete file.
* Makefile.am: Remove etic30aout.c from ALL_EMULATION_SOURCES and
delete dependency.
* configure.tgt: Delete tic30-*-*aout* entry.
* testsuite/ld-scripts/sane1.d: Delete tic30-*-aout mention.
* testsuite/ld-scripts/segment-start.d: Likewise.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
|
|
extensions and CSR
1. Remove the -mriscv-isa-version and --with-riscv-isa-version options.
We can still use -march to choose the version for each extensions, so there is
no need to add these.
2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...].
Unlike the architecture string has specified by spec, ther is no need to do
the same thing for options.
3. Spilt the patches to reduce the burdens of review.
[PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions
to
[PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions
[PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default.
[PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version.
to
[PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version.
[PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version.
4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c.
The behavior is same as comparing the choosen privilege spec.
include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean.
(enum riscv_isa_spec_class): New enum class. All supported ISA spec
belong to one of the class
(struct riscv_ext_version): New structure holds version information
for the specific ISA.
* opcode/riscv-opc.h (DECLARE_CSR): There are two version information,
define_version and abort_version. The define_version means which
privilege spec is started to define the CSR, and the abort_version
means which privilege spec is started to abort the CSR. If the CSR is
valid for the newest spec, then the abort_version should be
PRIV_SPEC_CLASS_DRAFT.
(DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR.
* opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define
the current supported privilege spec versions.
(struct riscv_csr_extra): Add new fields to store more information
about the CSR. We use these information to find the suitable CSR
address when user choosing a specific privilege spec.
binutils * dwarf.c: Updated since DECLARE_CSR is changed.
opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store
all information about the supported spec and the corresponding ISA
versions. Currently, only Zicsr is supported to verify the
correctness of Z sub extension settings. Others will be supported
in the future patches.
(struct isa_spec_t, isa_specs): List for all supported ISA spec
classes and the corresponding strings.
(riscv_get_isa_spec_class): New function. Get the corresponding ISA
spec class by giving a ISA spec string.
* riscv-opc.c (struct priv_spec_t): New structure.
(struct priv_spec_t priv_specs): List for all supported privilege spec
classes and the corresponding strings.
(riscv_get_priv_spec_class): New function. Get the corresponding
privilege spec class by giving a spec string.
(riscv_get_priv_spec_name): New function. Get the corresponding
privilege spec string by giving a CSR version class.
* riscv-dis.c: Updated since DECLARE_CSR is changed.
* riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR
according to the chosen version. Build a hash table riscv_csr_hash to
store the valid CSR for the chosen pirv verison. Dump the direct
CSR address rather than it's name if it is invalid.
(parse_riscv_dis_option_without_args): New function. Parse the options
without arguments.
(parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to
parse the options without arguments first, and then handle the options
with arguments. Add the new option -Mpriv-spec, which has argument.
* riscv-dis.c (print_riscv_disassembler_options): Add description
about the new OBJDUMP option.
ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated
priv attributes according to the -mpriv-spec option.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise.
bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function
get_default_version. It is used to find the default version for
the specific extension.
* elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters
default_major_version and default_minor_version. Add new bfd_boolean
parameter *use_default_version. Set it to TRUE if we need to call
the callback rps->get_default_version to find the default version.
(riscv_parse_std_ext): Call rps->get_default_version if we fail to find
the default version in riscv_parsing_subset_version, and then call
riscv_add_subset to add the subset into subset list.
(riscv_parse_prefixed_ext): Likewise.
(riscv_std_z_ext_strtab): Support Zicsr extensions.
* elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the
strings rather than characters.
riscv_merge_arch_attr_info): The callback function get_default_version
is only needed for assembler, so set it to NULL int the linker.
* elfxx-riscv.c (riscv_estimate_digit): Remove the static.
* elfxx-riscv.h: Updated.
gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated.
* config/tc-riscv.c (default_arch_with_ext, default_isa_spec):
Static variables which are used to set the ISA extensions. You can
use -march (or ELF build attributes) and -misa-spec to set them,
respectively.
(ext_version_hash): The hash table used to handle the extensions
with versions.
(init_ext_version_hash): Initialize the ext_version_hash according
to riscv_ext_version_table.
(riscv_get_default_ext_version): The callback function of
riscv_parse_subset_t. According to the choosed ISA spec,
get the default version for the specific extension.
(riscv_set_arch): Set the callback function.
(enum options, struct option md_longopts): Add new option -misa-spec.
(md_parse_option): Do not call riscv_set_arch for -march. We will
call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class
to set default_isa_spec class.
(riscv_after_parse_args): Call init_ext_version_hash to initialize the
ext_version_hash, and then call riscv_set_arch to set the architecture
with versions according to default_arch_with_ext.
* testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for
x extensions.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we
already set it's version to 2p1 by march, so no need to use the default
2p2 version. For m-ext, we do not set the version by -march and ELF arch
attribute, so set the default 2p0 to it. For zicsr, it is not defined in
ISA spec 2p2, so set 0p0 to it.
* testsuite/gas/riscv/attribute-10.d: New testcase. The version of
zicsr is 2p0 according to ISA spec 20191213.
* config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT)
(DEFAULT_RISCV_ISA_SPEC): Default configure option settings.
You can set them by configure options --with-arch and
--with-isa-spec, respectively.
(riscv_set_default_isa_spec): New function used to set the
default ISA spec.
(md_parse_option): Call riscv_set_default_isa_spec rather than
call riscv_get_isa_spec_class directly.
(riscv_after_parse_args): If the -isa-spec is not set, then we
set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by
calling riscv_set_default_isa_spec.
* testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since
the --with-isa-spec may be set to different ISA spec.
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* configure.ac: Add configure options, --with-arch and
--with-isa-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (default_priv_spec): Static variable which is
used to check if the CSR is valid for the chosen privilege spec. You
can use -mpriv-spec to set it.
(enum reg_class): We now get the CSR address from csr_extra_hash rather
than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX.
(riscv_init_csr_hashes): Only need to initialize one hash table
csr_extra_hash.
(riscv_csr_class_check): Change the return type to void. Don't check
the ISA dependency if -mcsr-check isn't set.
(riscv_csr_version_check): New function. Check and find the CSR address
from csr_extra_hash, according to default_priv_spec. Report warning
for the invalid CSR if -mcsr-check is set.
(reg_csr_lookup_internal): Updated.
(reg_lookup_internal): Likewise.
(md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed.
(enum options, struct option md_longopts): Add new GAS option -mpriv-spec.
(md_parse_option): Call riscv_set_default_priv_version to set
default_priv_spec.
(riscv_after_parse_args): If -mpriv-spec isn't set, then set the default
privilege spec to the newest one.
(enum riscv_csr_class, struct riscv_csr_extra): Move them to
include/opcode/riscv.h.
* testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want
to check the ISA dependency for CSR, so fix the spec version by adding
-mpriv-spec=1.11.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some
version warnings for the test case.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case.
Check whether the CSR is valid when privilege version 1.9 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case.
Check whether the CSR is valid when privilege version 1.9.1 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case.
Check whether the CSR is valid when privilege version 1.10 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case.
Check whether the CSR is valid when privilege version 1.11 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option
setting. You can set it by configure option --with-priv-spec.
(riscv_set_default_priv_spec): New function used to set the default
privilege spec.
(md_parse_option): Call riscv_set_default_priv_spec rather than
call riscv_get_priv_spec_class directly.
(riscv_after_parse_args): If -mpriv-spec isn't set, then we set the
default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by
calling riscv_set_default_priv_spec.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since
the --with-priv-spec may be set to different privilege spec.
* testsuite/gas/riscv/priv-reg.d: Likewise.
* configure.ac: Add configure option --with-priv-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to
explicit_attr. Set it to TRUE if any ELF attribute is found.
(riscv_set_default_priv_spec): Try to set the default_priv_spec if
the priv attributes are set.
(md_assemble): Set the default_priv_spec according to the priv
attributes when we start to assemble instruction.
(riscv_write_out_attrs): Rename riscv_write_out_arch_attr to
riscv_write_out_attrs. Update the arch and priv attributes. If we
don't set the corresponding ELF attributes, then try to output the
default ones.
(riscv_set_public_attributes): If any ELF attribute or -march-attr
options is set (explicit_attr is TRUE), then call riscv_write_out_attrs
to update the arch and priv attributes.
(s_riscv_attribute): Make sure all arch and priv attributes are set
before any instruction.
* testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any
ELF attribute or -march-attr is set. If the priv attributes are not
set, then try to update them by the default setting (-mpriv-spec or
--with-priv-spec).
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: Likewise.
* testsuite/gas/riscv/attribute-10.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec
set by priv attributes must be supported.
* testsuite/gas/riscv/attribute-05.s: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated
priv attributes according to the -mpriv-spec option.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg.d: Removed.
* testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the
CSR according to the priv spec 1.9.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the
CSR according to the priv spec 1.9.1.
* testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the
CSR according to the priv spec 1.10.
* testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the
CSR according to the priv spec 1.11.
* config/tc-riscv.c (md_show_usage): Add descriptions about
the new GAS options.
* doc/c-riscv.texi: Likewise.
|
|
|
|
After commit 999d6dff80f cpu-plugin.c is no longer begin used.
* Makefile.am (ALL_MACHINES): Remove cpu-plugin.lo.
(ALL_MACHINES_CFILES): Remove cpu-plugin.c.
* Makefile.in: Regenerate.
* cpu-plugin.c: Remove.
* archures.c (enum bfd_architecture): Remove bfd_arch_plugin.
(bfd_plugin_arch): Remove declaration.
* bfd-in2.h: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
|
|
|
|
|
|
|
|
Add an ELF based target for these as well.
PR 25224
bfd * Makefile.am: Add z80-elf target support.
* configure.ac: Likewise.
* targets.c: Likewise.
* config.bfd: Add z80-elf target support and new arches: ez80 and z180.
* elf32-z80.c: New file.
* archures.c: Add new z80 architectures: eZ80 and Z180.
* coffcode.h: Likewise.
* cpu-z80.c: Likewise.
* bfd-in2.h: Likewise plus additional Z80 relocations.
* coff-z80.c: Add new relocations for Z80 target and local label check.
gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support
for assembler code generated by SDCC. Add new relocation types. Add
z80-elf target support.
* config/tc-z80.h: Add z80-elf target support. Enable dollar local
labels. Local labels starts from ".L".
* testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict.
* testsuite/gas/all/fwdexp.s: Likewise.
* testsuite/gas/z80/suffix.d: Fix failure on ELF target.
* testsuite/gas/z80/z80.exp: Add new tests
* testsuite/gas/z80/dollar.d: New file.
* testsuite/gas/z80/dollar.s: New file.
* testsuite/gas/z80/ez80_adl_all.d: New file.
* testsuite/gas/z80/ez80_adl_all.s: New file.
* testsuite/gas/z80/ez80_adl_suf.d: New file.
* testsuite/gas/z80/ez80_isuf.s: New file.
* testsuite/gas/z80/ez80_z80_all.d: New file.
* testsuite/gas/z80/ez80_z80_all.s: New file.
* testsuite/gas/z80/ez80_z80_suf.d: New file.
* testsuite/gas/z80/r800_extra.d: New file.
* testsuite/gas/z80/r800_extra.s: New file.
* testsuite/gas/z80/r800_ii8.d: New file.
* testsuite/gas/z80/r800_z80_doc.d: New file.
* testsuite/gas/z80/z180.d: New file.
* testsuite/gas/z80/z180.s: New file.
* testsuite/gas/z80/z180_z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.s: New file.
* testsuite/gas/z80/z80_ii8.d: New file.
* testsuite/gas/z80/z80_ii8.s: New file.
* testsuite/gas/z80/z80_in_f_c.d: New file.
* testsuite/gas/z80/z80_in_f_c.s: New file.
* testsuite/gas/z80/z80_op_ii_ld.d: New file.
* testsuite/gas/z80/z80_op_ii_ld.s: New file.
* testsuite/gas/z80/z80_out_c_0.d: New file.
* testsuite/gas/z80/z80_out_c_0.s: New file.
* testsuite/gas/z80/z80_reloc.d: New file.
* testsuite/gas/z80/z80_reloc.s: New file.
* testsuite/gas/z80/z80_sli.d: New file.
* testsuite/gas/z80/z80_sli.s: New file.
ld * Makefile.am: Add new target z80-elf
* configure.tgt: Likewise.
* emultempl/z80.em: Add support for eZ80 and Z180 architectures.
* emulparams/elf32z80.sh: New file.
* emultempl/z80elf.em: Likewise.
* testsuite/ld-z80/arch_ez80_adl.d: Likewise.
* testsuite/ld-z80/arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/arch_r800.d: Likewise.
* testsuite/ld-z80/arch_z180.d: Likewise.
* testsuite/ld-z80/arch_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_z180.d: Likewise.
* testsuite/ld-z80/labels.s: Likewise.
* testsuite/ld-z80/relocs.s: Likewise.
* testsuite/ld-z80/relocs_b_ez80.d: Likewise.
* testsuite/ld-z80/relocs_b_z80.d: Likewise.
* testsuite/ld-z80/relocs_f_z80.d: Likewise.
* testsuite/ld-z80/z80.exp: Likewise.
opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
|
|
|
|
This is one way of fixing ubsan bug reports, just delete the code.
The assembler support was removed back in 2005 along with other
non-BFD assemblers, but somehow the remainder of the port stayed in.
bfd/
* coff-tic80.c: Delete file.
* cpu-tic80.c: Delete file.
* archures.c: Remove tic80 support.
* coffcode.h: Likewise.
* coffswap.h: Likewise.
* targets.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* Makefile.am: Likewise.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* testsuite/binutils-all/objcopy.exp: Remove tic80 support.
* testsuite/binutils-all/objdump.exp: Likewise.
gas/
* doc/as.texi: Remove mention of tic80.
include/
* coff/tic80.h: Delete file.
* opcode/tic80.h: Delete file.
ld/
* emulparams/tic80coff.sh: Delete file.
* scripttempl/tic80coff.sc: Delete file.
* configure.tgt: Remove tic80 support.
* Makefile.am: Likewise.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
opcodes/
* tic80-dis.c: Delete file.
* tic80-opc.c: Delete file.
* disassemble.c: Remove tic80 support.
* disassemble.h: Likewise.
* Makefile.am: Likewise.
* configure.ac: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
|
|
I think it is past time to remove CR16C support. CR16C was added in
2004, and only for ld. gas and binutils support is lacking, and there
have been no commits to bfd/elf32-cr16c.c other than warning fixes or
global maintainers making changes to all targets. I see no maintainer
listed for CR16C, and no commits from anyone at NSC supporting the
target. Furthermore, at the time the CR16 support was added in 2007,
config.sub was changed upstream to no longer recognise cr16c as a
valid cpu. That means the CR16C ld support is only available as a
secondary target by configuring with, for example,
--enable-targets=all or --enable-targets=cr16c-unknown-elf. No
testing of the CR16C target is possible.
include/
* elf/cr16c.h: Delete.
bfd/
* cpu-cr16c.c: Delete.
* elf32-cr16c.c: Delete.
* Makefile.am,
* archures.c,
* config.bfd,
* configure.ac,
* reloc.c,
* targets.c: Remove cr16c support.
* Makefile.in,
* bfd-in2.h,
* configure,
* libbfd.h,
* po/SRC-POTFILES.in: Regenerate.
ld/
* emulparams/elf32cr16c.sh: Delete.
* scripttempl/elf32cr16c.sc: Delete.
* Makefile.am,
* configure.tgt: Remove cr16c support.
* NEWS: Mention removal of cr16c.
* Makefile.in,
* po/BLD-POTFILES.in: Regenerate.
|
|
* Makefile.am (SOURCE_HFILES): Add many missing .h files.
* Makefile.in: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
|
|
bfd/
* po/SRC-POTFILES.in: Regenerate.
gas/
* po/POTFILES.in: Regenerate.
ld/
* po/BLD-POTFILES.in: Regenerate.
opcodes/
* po/POTFILES.in: Regenerate.
|
|
bfd * po/fr.po: Updated French translation.
binutils* po/ca.po: Updated Catalan translation.
gprof * po/de.po: Updated German translation.
opcodes * po/fr.po: Updated French translation.
|
|
sub-directories
|
|
|
|
|
|
|
|
|
|
gas * po/fr.po: Updated French translation.
bfd * po/fr.po: Updated French translation.
* po/pt.po: Updated Portuguese translation.
binutils* po/pt.po: Updated Portuguese translation.
|
|
|
|
bfd/
* po/SRC-POTFILES.in: Regenerate.
gas/
* po/POTFILES.in: Regenerate.
ld/
* po/BLD-POTFILES.in: Regenerate.
opcodes/
* po/POTFILES.in: Regenerate.
|
|
various components of the binutuls.
ld * po/bg.po: Updated Bulgarian translation.
* po/pt_BR.po: Updated Brazilian Portuguese translation.
binutils* po/bg.po: Updated Bulgarian translation.
bfd,gas * po/ru.po: Updated Russian translation.
|
|
gas * po/uk.po: Updated Ukranian translation.
bfd * po/uk.po: Updated Ukranian translation.
ld * po/uk.po: Updated Ukranian translation.
gold * po/uk.po: Updated Ukranian translation.
opcodes * po/uk.po: Updated Ukranian translation.
* po/de.po: Updated German translation.
* po/pt_BR.po: Updated Brazilian Portuguese translation.
binutils* po/sv.po: Updated Swedish translation.
* po/uk.po: Updated Ukranian translation.
|
|
|
|
This patch regenerates a number of files that either were edited by
hand or not regenerated when s12z support was added to binutils.
bfd/
* Makefile.in: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
gas/
* po/POTFILES.in: Regenerate.
ld/
* po/BLD-POTFILES.in: Regenerate.
opcodes/
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
|
|
* po/pt.po: New Portuguese translation.
* configure.ac (ALL_LINGUAS): Add pt.
* configure: Regenerate.
|
|
Processor) ELF files (.nffw) as well as some basic readelf support.
bfd * Makefile.am: Added NFP files to build.
* archures.c: Added bfd_arch_nfp
* config.bfd: Added NFP support.
* configure.ac: Added NFP support.
* cpu-nfp.c: New, for NFP support.
* elf-bfd.h: Added elf_section_info()
* elf64-nfp.c: New, for NFP support.
* po/SRC-POTFILES.in: Added NFP source files.
* targets.c: Added nfp_elf64_vec
* bfd-in2.h: Regenerate.
* Makefile.in: Regenerate.
* configure: Regenerate.
binutils* readelf.c: Very basic support for EM_NFP and its section types.
* testsuite/binutils-all/nfp: New directory.
* testsuite/binutils-all/nfp/objdump.exp: New file. Run new
tests.
* testsuite/binutils-all/nfp/test2_ctx8.d: New file.
* testsuite/binutils-all/nfp/test2_no-pc_ctx4.d: New file.
* testsuite/binutils-all/nfp/test1.d: New file.
* testsuite/binutils-all/nfp/nfp6000.nffw: New file.
* testsuite/binutils-all/nfp/test2_nfp6000.nffw: New file.
* NEWS: Mention the new support.
include * dis-asm.h: Added print_nfp_disassembler_options prototype.
* elf/common.h: Added EM_NFP, officially assigned. See Google Group
Generic System V Application Binary Interface.
* elf/nfp.h: New, for NFP support.
* opcode/nfp.h: New, for NFP support.
opcodes Makefile.am: Added nfp-dis.c.
configure.ac: Added bfd_nfp_arch.
disassemble.h: Added print_insn_nfp prototype.
disassemble.c: Added ARCH_nfp and call to print_insn_nfp
nfp-dis.c: New, for NFP support.
po/POTFILES.in: Added nfp-dis.c to the list.
Makefile.in: Regenerate.
configure: Regenerate.
|
|
This also removes arm-netbsd (not arm-netbsdelf!), arm-openbsd, and
arm-riscix. Those targets weren't on the obsolete list but they are
all aout, and it doesn't make all that much sense to remove arm-aout
without removing them too.
bfd/
* Makefile.am: Remove arm-aout and arm-coff support.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* aout-arm.c: Delete.
* armnetbsd.c: Delete.
* riscix.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* testsuite/binutils-all/arm/objdump.exp: Remove arm-aout and
arm-coff support.
* testsuite/binutils-all/objcopy.exp: Likewise.
* testsuite/lib/binutils-common.exp: Likewise.
gas/
* Makefile.am: Remove arm-aout and arm-coff support.
* config/tc-arm.c: Likewise.
* config/tc-arm.h: Likewise.
* configure.tgt: Likewise.
* testsuite/gas/aarch64/codealign.d: Likewise.
* testsuite/gas/aarch64/mapping.d: Likewise.
* testsuite/gas/aarch64/mapping2.d: Likewise.
* testsuite/gas/arm/adds-thumb1-reloc-local-armv7-m.d: Likewise.
* testsuite/gas/arm/adds-thumb1-reloc-local.d: Likewise.
* testsuite/gas/arm/addsw-bad.d: Likewise.
* testsuite/gas/arm/align.d: Likewise.
* testsuite/gas/arm/align64.d: Likewise.
* testsuite/gas/arm/arch7.d: Likewise.
* testsuite/gas/arm/arch7a-mp.d: Likewise.
* testsuite/gas/arm/arch7em.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-5.d: Likewise.
* testsuite/gas/arm/arm-it-auto-2.d: Likewise.
* testsuite/gas/arm/arm-it-auto-3.d: Likewise.
* testsuite/gas/arm/arm-it-auto.d: Likewise.
* testsuite/gas/arm/arm-it-bad-2.d: Likewise.
* testsuite/gas/arm/arm-it.d: Likewise.
* testsuite/gas/arm/armv7e-m+fpv5-d16.d: Likewise.
* testsuite/gas/arm/armv7e-m+fpv5-sp-d16.d: Likewise.
* testsuite/gas/arm/armv8-2-fp16-scalar-thumb.d: Likewise.
* testsuite/gas/arm/armv8-2-fp16-scalar.d: Likewise.
* testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise.
* testsuite/gas/arm/armv8-2-fp16-simd.d: Likewise.
* testsuite/gas/arm/armv8-a+crypto.d: Likewise.
* testsuite/gas/arm/armv8-a+fp.d: Likewise.
* testsuite/gas/arm/armv8-a+ras.d: Likewise.
* testsuite/gas/arm/armv8-a+rdma-warning.d: Likewise.
* testsuite/gas/arm/armv8-a+rdma.d: Likewise.
* testsuite/gas/arm/armv8-a+simd.d: Likewise.
* testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise.
* testsuite/gas/arm/armv8-r+fp.d: Likewise.
* testsuite/gas/arm/armv8-r+simd.d: Likewise.
* testsuite/gas/arm/armv8-r-barrier-thumb.d: Likewise.
* testsuite/gas/arm/armv8_1-a+simd.d: Likewise.
* testsuite/gas/arm/armv8_2+rdma.d: Likewise.
* testsuite/gas/arm/armv8_2-a.d: Likewise.
* testsuite/gas/arm/armv8_3-a-fp.d: Likewise.
* testsuite/gas/arm/armv8_3-a-simd.d: Likewise.
* testsuite/gas/arm/armv8a-automatic-hlt.d: Likewise.
* testsuite/gas/arm/armv8a-automatic-lda.d: Likewise.
* testsuite/gas/arm/attr-syntax.d: Likewise.
* testsuite/gas/arm/automatic-bw.d: Likewise.
* testsuite/gas/arm/automatic-cbz.d: Likewise.
* testsuite/gas/arm/automatic-clrex.d: Likewise.
* testsuite/gas/arm/automatic-lda.d: Likewise.
* testsuite/gas/arm/automatic-ldaex.d: Likewise.
* testsuite/gas/arm/automatic-ldaexb.d: Likewise.
* testsuite/gas/arm/automatic-ldrex.d: Likewise.
* testsuite/gas/arm/automatic-ldrexd.d: Likewise.
* testsuite/gas/arm/automatic-movw.d: Likewise.
* testsuite/gas/arm/automatic-sdiv.d: Likewise.
* testsuite/gas/arm/automatic-strexb.d: Likewise.
* testsuite/gas/arm/barrier-bad-thumb.d: Likewise.
* testsuite/gas/arm/barrier-bad.d: Likewise.
* testsuite/gas/arm/barrier-thumb.d: Likewise.
* testsuite/gas/arm/barrier.d: Likewise.
* testsuite/gas/arm/bignum1.d: Likewise.
* testsuite/gas/arm/blx-bad.d: Likewise.
* testsuite/gas/arm/blx-bl-convert.d: Likewise.
* testsuite/gas/arm/blx-local.s: Likewise.
* testsuite/gas/arm/crc32-armv8-a-bad.d: Likewise.
* testsuite/gas/arm/crc32-armv8-a.d: Likewise.
* testsuite/gas/arm/crc32-armv8-r-bad.d: Likewise.
* testsuite/gas/arm/crc32-armv8-r.d: Likewise.
* testsuite/gas/arm/dis-data.d: Likewise.
* testsuite/gas/arm/dis-data2.d: Likewise.
* testsuite/gas/arm/dis-data3.d: Likewise.
* testsuite/gas/arm/eabi_attr_1.d: Likewise.
* testsuite/gas/arm/fp-save.d: Likewise.
* testsuite/gas/arm/group-reloc-alu-encoding-bad.d: Likewise.
* testsuite/gas/arm/group-reloc-alu-parsing-bad.d: Likewise.
* testsuite/gas/arm/group-reloc-alu.d: Likewise.
* testsuite/gas/arm/group-reloc-ldc-encoding-bad.d: Likewise.
* testsuite/gas/arm/group-reloc-ldc-parsing-bad.d: Likewise.
* testsuite/gas/arm/group-reloc-ldc.d: Likewise.
* testsuite/gas/arm/group-reloc-ldr-encoding-bad.d: Likewise.
* testsuite/gas/arm/group-reloc-ldr-parsing-bad.d: Likewise.
* testsuite/gas/arm/group-reloc-ldr.d: Likewise.
* testsuite/gas/arm/group-reloc-ldrs-encoding-bad.d: Likewise.
* testsuite/gas/arm/group-reloc-ldrs-parsing-bad.d: Likewise.
* testsuite/gas/arm/group-reloc-ldrs.d: Likewise.
* testsuite/gas/arm/insn-error-a.d: Likewise.
* testsuite/gas/arm/insn-error-t.d: Likewise.
* testsuite/gas/arm/inst-po-2.d: Likewise.
* testsuite/gas/arm/inst-po-3.d: Likewise.
* testsuite/gas/arm/inst-po-be.d: Likewise.
* testsuite/gas/arm/inst-po.d: Likewise.
* testsuite/gas/arm/ldconst.d: Likewise.
* testsuite/gas/arm/ldgesb-bad.d: Likewise.
* testsuite/gas/arm/ldgesh-bad.d: Likewise.
* testsuite/gas/arm/ldst-offset0.d: Likewise.
* testsuite/gas/arm/local_function.d: Likewise.
* testsuite/gas/arm/local_label_coff.d: Likewise.
* testsuite/gas/arm/local_label_elf.d: Likewise.
* testsuite/gas/arm/mapping.d: Likewise.
* testsuite/gas/arm/mapping2.d: Likewise.
* testsuite/gas/arm/mapping3.d: Likewise.
* testsuite/gas/arm/mapping4.d: Likewise.
* testsuite/gas/arm/mapshort-elf.d: Likewise.
* testsuite/gas/arm/mask_1-armv8-a.d: Likewise.
* testsuite/gas/arm/mask_1-armv8-r.d: Likewise.
* testsuite/gas/arm/movs-thumb1-reloc-local-armv7-m.d: Likewise.
* testsuite/gas/arm/movs-thumb1-reloc-local.d: Likewise.
* testsuite/gas/arm/movw-local.d: Likewise.
* testsuite/gas/arm/mrs-msr-thumb-v6t2.d: Likewise.
* testsuite/gas/arm/mrs-msr-thumb-v7-m.d: Likewise.
* testsuite/gas/arm/mrs-msr-thumb-v7e-m.d: Likewise.
* testsuite/gas/arm/msr-imm-bad.d: Likewise.
* testsuite/gas/arm/msr-reg-bad.d: Likewise.
* testsuite/gas/arm/msr-reg-thumb.d: Likewise.
* testsuite/gas/arm/nomapping.d: Likewise.
* testsuite/gas/arm/nops.d: Likewise.
* testsuite/gas/arm/pic.d: Likewise.
* testsuite/gas/arm/pinsn.d: Likewise.
* testsuite/gas/arm/plt-1.d: Likewise.
* testsuite/gas/arm/pr21458.d: Likewise.
* testsuite/gas/arm/pr9722.d: Likewise.
* testsuite/gas/arm/strex-t.d: Likewise.
* testsuite/gas/arm/t2-branch-global.d: Likewise.
* testsuite/gas/arm/target-reloc-1.d: Likewise.
* testsuite/gas/arm/thumb-b-bad.d: Likewise.
* testsuite/gas/arm/thumb-w-bad.d: Likewise.
* testsuite/gas/arm/thumb-w-good.d: Likewise.
* testsuite/gas/arm/thumb.d: Likewise.
* testsuite/gas/arm/thumb2_it.d: Likewise.
* testsuite/gas/arm/thumb2_it_auto.d: Likewise.
* testsuite/gas/arm/thumb2_it_search.d: Likewise.
* testsuite/gas/arm/thumb2_ldmstm.d: Likewise.
* testsuite/gas/arm/thumb2_ldr_immediate_armv6.d: Likewise.
* testsuite/gas/arm/thumb2_ldr_immediate_armv6t2.d: Likewise.
* testsuite/gas/arm/thumb2_ldr_immediate_highregs_armv6t2.d: Likewise.
* testsuite/gas/arm/thumb2_pool.d: Likewise.
* testsuite/gas/arm/thumb2_vpool.d: Likewise.
* testsuite/gas/arm/thumb2_vpool_be.d: Likewise.
* testsuite/gas/arm/thumb32.d: Likewise.
* testsuite/gas/arm/thumbver.d: Likewise.
* testsuite/gas/arm/tls.d: Likewise.
* testsuite/gas/arm/tls_vxworks.d: Likewise.
* testsuite/gas/arm/undefined.d: Likewise.
* testsuite/gas/arm/undefined_coff.d: Likewise.
* testsuite/gas/arm/unwind.d: Likewise.
* testsuite/gas/arm/v4bx.d: Likewise.
* testsuite/gas/arm/vcmp-noprefix-imm.d: Likewise.
* testsuite/gas/arm/vcvt-bad.d: Likewise.
* testsuite/gas/arm/vfma1.d: Likewise.
* testsuite/gas/arm/vldconst.d: Likewise.
* testsuite/gas/arm/vldconst_be.d: Likewise.
* testsuite/gas/arm/vldm-arm.d: Likewise.
* testsuite/gas/arm/vldr.d: Likewise.
* testsuite/gas/arm/weakdef-1.d: Likewise.
* testsuite/gas/arm/weakdef-2.d: Likewise.
* config/te-riscix.h: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove arm-aout and arm-coff support.
* configure.tgt: Likewise.
* testsuite/ld-arm/attr-merge-div-00.d: Likewise.
* testsuite/ld-arm/attr-merge-div-01-m3.d: Likewise.
* testsuite/ld-arm/attr-merge-div-01.d: Likewise.
* testsuite/ld-arm/attr-merge-div-02.d: Likewise.
* testsuite/ld-arm/attr-merge-div-10-m3.d: Likewise.
* testsuite/ld-arm/attr-merge-div-10.d: Likewise.
* testsuite/ld-arm/attr-merge-div-11.d: Likewise.
* testsuite/ld-arm/attr-merge-div-12.d: Likewise.
* testsuite/ld-arm/attr-merge-div-120.d: Likewise.
* testsuite/ld-arm/attr-merge-div-20.d: Likewise.
* testsuite/ld-arm/attr-merge-div-21.d: Likewise.
* testsuite/ld-arm/attr-merge-div-22.d: Likewise.
* testsuite/ld-arm/attr-merge-hardfp-use-1.d: Likewise.
* testsuite/ld-arm/attr-merge-hardfp-use-2.d: Likewise.
* testsuite/ld-arm/attr-merge-nosection-1.d: Likewise.
* testsuite/ld-arm/attr-merge-unknown-2.d: Likewise.
* testsuite/ld-arm/attr-merge-unknown-2r.d: Likewise.
* testsuite/ld-arm/attr-merge-unknown-3.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-1.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-10.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-10r.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-11.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-11r.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-12.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-12r.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-13.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-13r.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-14.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-14r.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-1r.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-2.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-2r.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-3.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-3r.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-4.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-4r.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-5.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-5r.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-6.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-6r.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-7.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-7r.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-8.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-8r.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-9.d: Likewise.
* testsuite/ld-arm/attr-merge-vfp-9r.d: Likewise.
* testsuite/ld-arm/attr-merge-wchar-00-nowarn.d: Likewise.
* testsuite/ld-arm/attr-merge-wchar-00.d: Likewise.
* testsuite/ld-arm/attr-merge-wchar-02-nowarn.d: Likewise.
* testsuite/ld-arm/attr-merge-wchar-02.d: Likewise.
* testsuite/ld-arm/attr-merge-wchar-04-nowarn.d: Likewise.
* testsuite/ld-arm/attr-merge-wchar-04.d: Likewise.
* testsuite/ld-arm/attr-merge-wchar-20-nowarn.d: Likewise.
* testsuite/ld-arm/attr-merge-wchar-20.d: Likewise.
* testsuite/ld-arm/attr-merge-wchar-22-nowarn.d: Likewise.
* testsuite/ld-arm/attr-merge-wchar-22.d: Likewise.
* testsuite/ld-arm/attr-merge-wchar-24-nowarn.d: Likewise.
* testsuite/ld-arm/attr-merge-wchar-40-nowarn.d: Likewise.
* testsuite/ld-arm/attr-merge-wchar-40.d: Likewise.
* testsuite/ld-arm/attr-merge-wchar-42-nowarn.d: Likewise.
* testsuite/ld-arm/attr-merge-wchar-44-nowarn.d: Likewise.
* testsuite/ld-arm/attr-merge-wchar-44.d: Likewise.
* testsuite/ld-arm/eabi-hard-float.d: Likewise.
* testsuite/ld-arm/eabi-soft-float-ABI4.d: Likewise.
* testsuite/ld-arm/eabi-soft-float-r.d: Likewise.
* testsuite/ld-arm/eabi-soft-float.d: Likewise.
* testsuite/ld-arm/gc-hidden-1.d: Likewise.
* emulparams/armaoutb.sh: Delete.
* emulparams/armaoutl.sh: Delete.
* emulparams/armcoff.sh: Delete.
* emulparams/armnbsd.sh: Delete.
* emulparams/riscix.sh: Delete.
* scripttempl/armaout.sc: Delete.
* scripttempl/armcoff.sc: Delete.
* scripttempl/riscix.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
|