| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For
add %reg1, name@gottpoff(%rip), %reg2
and
add name@gottpoff(%rip), %reg1, %reg2
add
#define R_X86_64_CODE_6_GOTTPOFF 50
if the instruction starts at 6 bytes before the relocation offset.
They are similar to R_X86_64_GOTTPOFF. Linker can covert GOTTPOFF to
add $name@tpoff, %reg1, %reg2
Rewrite fx_tcbit, fx_tcbit2 and fx_tcbit3 usage to generate
R_X86_64_GOTPCRELX, R_X86_64_REX_GOTPCRELX, R_X86_64_CODE_4_GOTPCRELX,
R_X86_64_CODE_4_GOTTPOFF, R_X86_64_CODE_4_GOTPC32_TLSDESC and
R_X86_64_CODE_6_GOTTPOFF.
NB: There is no need to check BFD_RELOC_X86_64_CODE_4_GOTTPOFF in
md_assemble since there is only BFD_RELOC_X86_64_GOTTPOFF at this
stage, which will be converted to BFD_RELOC_X86_64_CODE_4_GOTTPOFF
or BFD_RELOC_X86_64_CODE_6_GOTTPOFF in i386_validate_fix.
5 relocations:
#define R_X86_64_CODE_5_GOTPCRELX 46
#define R_X86_64_CODE_5_GOTTPOFF 47
#define R_X86_64_CODE_5_GOTPC32_TLSDESC 48
#define R_X86_64_CODE_6_GOTPCRELX 49
#define R_X86_64_CODE_6_GOTPC32_TLSDESC 51
are added for completeness and they are unused.
bfd/
* elf64-x86-64.c (x86_64_elf_howto_table): Add
R_X86_64_CODE_5_GOTPCRELX, R_X86_64_CODE_5_GOTTPOFF,
R_X86_64_CODE_5_GOTPC32_TLSDESC, R_X86_64_CODE_6_GOTPCRELX,
R_X86_64_CODE_6_GOTTPOFF and R_X86_64_CODE_6_GOTPC32_TLSDESC.
(R_X86_64_standard): Updated.
(x86_64_reloc_map): Add R_X86_64_CODE_5_GOTPCRELX,
R_X86_64_CODE_5_GOTTPOFF, R_X86_64_CODE_5_GOTPC32_TLSDESC,
R_X86_64_CODE_6_GOTPCRELX, R_X86_64_CODE_6_GOTTPOFF and
R_X86_64_CODE_6_GOTPC32_TLSDESC.
(elf_x86_64_check_tls_transition): Handle
R_X86_64_CODE_6_GOTTPOFF.
(elf_x86_64_tls_transition): Likewise.
(elf_x86_64_scan_relocs): Handle R_X86_64_CODE_6_GOTTPOFF.
Issue an error for R_X86_64_CODE_5_GOTPCRELX,
R_X86_64_CODE_5_GOTTPOFF, R_X86_64_CODE_5_GOTPC32_TLSDESC,
R_X86_64_CODE_6_GOTPCRELX and R_X86_64_CODE_6_GOTPC32_TLSDESC.
(elf_x86_64_relocate_section): Handle R_X86_64_CODE_6_GOTTPOFF.
* reloc.c (bfd_reloc_code_real): Add
BFD_RELOC_X86_64_CODE_5_GOTPCRELX,
BFD_RELOC_X86_64_CODE_5_GOTTPOFF,
BFD_RELOC_X86_64_CODE_5_GOTPC32_TLSDESC,
BFD_RELOC_X86_64_CODE_6_GOTPCRELX,
BFD_RELOC_X86_64_CODE_6_GOTTPOFF and
BFD_RELOC_X86_64_CODE_6_GOTPC32_TLSDESC.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
elfcpp/
* x86_64.h (R_X86_64_CODE_5_GOTPCRELX): New.
(R_X86_64_CODE_5_GOTTPOFF): Likewise.
(R_X86_64_CODE_5_GOTPC32_TLSDESC): Likewise.
(R_X86_64_CODE_6_GOTPCRELX): Likewise.
(R_X86_64_CODE_6_GOTTPOFF): Likewise.
(R_X86_64_CODE_6_GOTPC32_TLSDESC): Likewise.
gas/
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_X86_64_CODE_6_GOTTPOFF.
(md_assemble): Don't check BFD_RELOC_X86_64_CODE_4_GOTTPOFF.
Allow "add %reg1, foo@gottpoff(%rip), %reg2".
(output_disp): Handle BFD_RELOC_X86_64_CODE_6_GOTTPOFF. Rewrite
setting fx_tcbitX bits for BFD_RELOC_X86_64_GOTTPOFF,
BFD_RELOC_X86_64_GOTPC32_TLSDESC and BFD_RELOC_32_PCREL.
(md_apply_fix): Handle BFD_RELOC_X86_64_CODE_6_GOTTPOFF.
(i386_validate_fix): Rewrite fx_tcbitX bit checking for
BFD_RELOC_X86_64_GOTTPOFF, BFD_RELOC_X86_64_GOTPC32_TLSDESC and
BFD_RELOC_32_PCREL.
(tc_gen_reloc): Handle BFD_RELOC_X86_64_CODE_6_GOTTPOFF.
* testsuite/gas/i386/x86-64-gottpoff.d: Updated.
* testsuite/gas/i386/x86-64-gottpoff.s: Add tests for
"add %reg1, foo@gottpoff(%rip), %reg2" and
"add foo@gottpoff(%rip), %reg, %reg2".
gold/
* x86_64.cc (Target_x86_64::optimize_tls_reloc): Handle
R_X86_64_CODE_6_GOTTPOFF.
(Target_x86_64::Scan::get_reference_flags): Likewise.
(Target_x86_64::Scan::local): Likewise.
(Target_x86_64::Scan::global): Likewise.
(Target_x86_64::Relocate::relocate): Likewise.
(Target_x86_64::Relocate::relocate_tls): Likewise.
(Target_x86_64::Relocate::tls_ie_to_le): Handle.
R_X86_64_CODE_6_GOTTPOFF.
* testsuite/x86_64_ie_to_le.s: Add tests for
"add %reg1, foo@gottpoff(%rip), %reg2" and
"add foo@gottpoff(%rip), %reg, %reg2".
* testsuite/x86_64_ie_to_le.sh: Updated.
include/
* elf/x86-64.h (elf_x86_64_reloc_type): Add
R_X86_64_CODE_5_GOTPCRELX, R_X86_64_CODE_5_GOTTPOFF,
R_X86_64_CODE_5_GOTPC32_TLSDESC, R_X86_64_CODE_6_GOTPCRELX,
R_X86_64_CODE_6_GOTTPOFF and R_X86_64_CODE_6_GOTPC32_TLSDESC.
ld/
* testsuite/ld-x86-64/tlsbindesc.s: Add R_X86_64_CODE_6_GOTTPOFF
tests.
* testsuite/ld-x86-64/tlsbindesc.d: Updated.
* testsuite/ld-x86-64/tlsbindesc.rd: Likewise.
(cherry picked from commit 5bc71c2a6b8efb27089baa1fecded82be4f550a7)
|
|
Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
|
|
Add tls le relax support and related relocs in bfd.
New relocation related explanation can refer to the following url:
https://github.com/loongson/la-abi-specs/blob/release/laelf.adoc
This support does two main things:
1. Implement support for three new relocation items in bfd.
The three new relocation items are shown below:
R_LARCH_TLS_LE_ADD_R
R_LARCH_TLS_LE_HI20_R
R_LARCH_TLS_LE_LO12_R
2. ADD a new macro RELOCATE_TLS_TP32_HI20
Handle problems caused by symbol extensions in TLS LE, The processing
is similar to the macro RELOCATE_CALC_PC32_HI20 method.
3. Implement the tls le relax function.
bfd/ChangeLog:
* bfd-in2.h: Add relocs related to tls le relax.
* elfnn-loongarch.c:
(loongarch_relax_tls_le): New function.
(RELOCATE_TLS_TP32_HI20): New macro.
(loongarch_elf_check_relocs): Add new reloc support.
(perform_relocation): Likewise.
(loongarch_elf_relocate_section): Handle new relocs related to relax.
(loongarch_elf_relax_section): Likewise.
* elfxx-loongarch.c:
(LOONGARCH_HOWTO (R_LARCH_TLS_LE_ADD_R)): New reloc how to type.
(LOONGARCH_HOWTO (R_LARCH_TLS_LE_HI20_R)): Likewise.
(LOONGARCH_HOWTO (R_LARCH_TLS_LE_LO12_R)): Likewise.
* libbfd.h: Add relocs related to tls le relax.
* reloc.c: Likewise.
|
|
For
add name@gottpoff(%rip), %reg
mov name@gottpoff(%rip), %reg
add
# define R_X86_64_CODE_4_GOTTPOFF 44
and for
lea name@tlsdesc(%rip), %reg
add
# define R_X86_64_CODE_4_GOTPC32_TLSDESC 45
if the instruction starts at 4 bytes before the relocation offset.
They are similar to R_X86_64_GOTTPOFF and R_X86_64_GOTPC32_TLSDESC,
respectively. Linker can covert GOTTPOFF to
add $name@tpoff, %reg
mov $name@tpoff, %reg
and GOTPC32_TLSDESC to
mov $name@tpoff, %reg
mov name@gottpoff(%rip), %reg
if the instruction is encoded with the REX2 prefix when possible.
bfd/
* elf64-x86-64.c (x86_64_elf_howto_table): Add
R_X86_64_CODE_4_GOTTPOFF and R_X86_64_CODE_4_GOTPC32_TLSDESC.
(R_X86_64_standard): Updated.
(x86_64_reloc_map): Add BFD_RELOC_X86_64_CODE_4_GOTTPOFF
and BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
(elf_x86_64_check_tls_transition): Handle R_X86_64_CODE_4_GOTTPOFF
and R_X86_64_CODE_4_GOTPC32_TLSDESC.
(elf_x86_64_tls_transition): Likewise.
(elf_x86_64_scan_relocs): Likewise.
(elf_x86_64_relocate_section): Likewise.
* reloc.c (bfd_reloc_code_real): Add
BFD_RELOC_X86_64_CODE_4_GOTTPOFF and
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
gas/
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_X86_64_CODE_4_GOTTPOFF and
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
(md_assemble): Handle BFD_RELOC_X86_64_CODE_4_GOTTPOFF.
(output_insn): Don't add empty REX prefix with REX2 prefix.
(output_disp): Handle BFD_RELOC_X86_64_CODE_4_GOTTPOFF and
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
(md_apply_fix): Likewise.
(i386_validate_fix): Generate BFD_RELOC_X86_64_CODE_4_GOTTPOFF or
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC if ixp->fx_tcbit3 is set.
(tc_gen_reloc): Handle BFD_RELOC_X86_64_CODE_4_GOTTPOFF and
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
* testsuite/gas/i386/x86-64-gottpoff.d: New file.
* testsuite/gas/i386/x86-64-gottpoff.s: Likewise.
* testsuite/gas/i386/x86-64-tlsdesc.d: Likewise.
* testsuite/gas/i386/x86-64-tlsdesc.s: Likewise.
include/
* elf/x86-64.h (elf_x86_64_reloc_type): Add
R_X86_64_CODE_4_GOTTPOFF and R_X86_64_CODE_4_GOTPC32_TLSDESC
ld/
* testsuite/ld-x86-64/tlsbindesc.d: Updated.
* testsuite/ld-x86-64/tlsbindesc.rd: Likewise.
* testsuite/ld-x86-64/tlsbindesc.s: Add R_X86_64_CODE_4_GOTTPOFF
and R_X86_64_CODE_4_GOTPC32_TLSDESC tests.
|
|
For
mov name@GOTPCREL(%rip), %reg
test %reg, name@GOTPCREL(%rip)
binop name@GOTPCREL(%rip), %reg
where binop is one of adc, add, add, cmp, or, sbb, sub, xor instructions,
add
# define R_X86_64_CODE_4_GOTPCRELX 43
if the instruction starts at 4 bytes before the relocation offset. It
similar to R_X86_64_GOTPCRELX. Linker can treat R_X86_64_CODE_4_GOTPCRELX
as R_X86_64_GOTPCREL or convert the above instructions to
lea name(%rip), %reg
mov $name, %reg
test $name, %reg
binop $name, %reg
if the instruction is encoded with the REX2 prefix when possible.
bfd/
* elf64-x86-64.c (x86_64_elf_howto_table): Add
R_X86_64_CODE_4_GOTPCRELX.
(R_X86_64_standard): Updated.
(x86_64_reloc_map): Add BFD_RELOC_X86_64_CODE_4_GOTPCRELX.
(elf_x86_64_convert_load_reloc): Handle R_X86_64_CODE_4_GOTPCRELX.
(elf_x86_64_scan_relocs): Likewise.
(elf_x86_64_relocate_section): Likewise.
* reloc.c (bfd_reloc_code_real): Add
BFD_RELOC_X86_64_CODE_4_GOTPCRELX.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
gas/
* write.h (fix): Add fx_tcbit3. Change fx_unused to 1 bit.
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_X86_64_CODE_4_GOTPCRELX.
(tc_gen_reloc): Likewise.
(output_disp): Set fixP->fx_tcbit3 for REX2 prefix.
(i386_validate_fix): Generate BFD_RELOC_X86_64_CODE_4_GOTPCRELX
if fixp->fx_tcbit3 is set.
* config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Add
BFD_RELOC_X86_64_CODE_4_GOTPCRELX.
(TC_FORCE_RELOCATION_ABS): Likewise.
* testsuite/gas/i386/x86-64-gotpcrel.s: Add tests for
R_X86_64_CODE_4_GOTPCRELX.
* testsuite/gas/i386/x86-64-localpic.s: Likewise.
* testsuite/gas/i386/x86-64-gotpcrel.d: Updated.
* testsuite/gas/i386/x86-64-localpic.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-localpic.d: Likewise.
include/
* elf/x86-64.h (elf_x86_64_reloc_type): Add
R_X86_64_CODE_4_GOTPCRELX.
ld/
* testsuite/ld-x86-64/apx-load1.s: New file.
* testsuite/ld-x86-64/apx-load1a.d: Likewise.
* testsuite/ld-x86-64/apx-load1b.d: Likewise.
* testsuite/ld-x86-64/apx-load1c.d: Likewise.
* testsuite/ld-x86-64/apx-load1d.d: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run apx-load1a, apx-load1b,
apx-load1c and apx-load1d.
|
|
The pcalau12i + addi.d of TLS LD/GD/DESC relax to pcaddi.
Relaxation is only performed when the TLS model transition is not possible.
|
|
The normal DESC instruction sequence is:
pcalau12i $a0,%desc_pc_hi20(var) #R_LARCH_TLS_DESC_PC_HI20
addi.d $a0,$a0,%desc_pc_lo12(var) #R_LARCH_TLS_DESC_PC_LO12
ld.d $ra,$a0,%desc_ld(var) #R_LARCH_TLS_DESC_LD
jirl $ra,$ra,%desc_call(var) #R_LARCH_TLS_DESC_CALL
add.d $a0,$a0,$tp
|
|
R_LARCH_CALL36 is used for medium code model function call pcaddu18i+jirl, and
these two instructions must adjacent.
The LoongArch ABI v2.20 at here: https://github.com/loongson/la-abi-specs.
|
|
This patch provides some minimal thread-safety to BFD.
The BFD client can request thread-safety by providing a lock and
unlock function. The globals used during BFD creation (e.g.,
bfd_id_counter) are then locked, and the file descriptor cache is also
locked. A function to clean up any thread-local data is now provided
for BFD clients.
* bfd-in2.h: Regenerate.
* bfd.c (lock_fn, unlock_fn): New globals.
(bfd_thread_init, bfd_thread_cleanup, bfd_lock, bfd_unlock): New
functions.
* cache.c (bfd_cache_lookup_worker): Use _bfd_open_file_unlocked.
(cache_btell, cache_bseek, cache_bread, cache_bwrite): Lock
and unlock.
(cache_bclose): Add comment.
(cache_bflush, cache_bstat, cache_bmmap): Lock and unlock.
(_bfd_cache_init_unlocked): New function.
(bfd_cache_init): Use it. Lock and unlock.
(_bfd_cache_close_unlocked): New function.
(bfd_cache_close, bfd_cache_close_all): Use it. Lock and unlock.
(_bfd_open_file_unlocked): New function.
(bfd_open_file): Use it. Lock and unlock.
* doc/bfd.texi (BFD front end): Add Threading menu item.
* libbfd.h: Regenerate.
* opncls.c (_bfd_new_bfd): Lock and unlock.
* po/bfd.pot: Regenerate.
|
|
This makes _bfd_error_buf static and adds a way to clear it. I felt
that this made the subsequent patches a little cleaner.
* bfd.c (_bfd_error_buf): Now static.
(bfd_set_input_error): Use _bfd_clear_error_data.
(_bfd_clear_error_data): New function.
(bfd_init): Use _bfd_clear_error_data.
* libbfd.h: Regenerate.
* opncls.c (bfd_close_all_done): Use _bfd_clear_error_data.
* po/bfd.pot: Regenerate.
|
|
Just the lightest modifications about this, without any further checks and
considering --emit-relocs. We will need to improve it in the future, but
first do this to avoid conflicts between linker internal relocations and the
new definition of psabi. For example, TLSDESC relocs.
Passed riscv-gnu-toolchain regressions, so should be safe enough to commit.
Co-authored-by: Tsukasa OI <research_trasio@irq.a4lg.com>
bfd/
* reloc.c: Removed linker internal relocations.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
* elfnn-riscv.c: Defined R_RISCV_DELETE in include/elf/riscv.h.
* elfxx-riscv.c (howto_table, howto_table_internal): Moved linker
internal relocations from howto_table into howto_table_internal.
(riscv_reloc_map): Removed linker internal relocations mapping.
(riscv_elf_rtype_to_howto): Return howto of linker internal
relocations from howto_table_internal.
include/
* elf/riscv.h: Defined linker internal relocations after R_RISCV_max.
|
|
I noticed the regenerated BFD_RELOC_MICROBLAZE_32_NONE comment didn't
match that committed to bfd-in2.h, and was just going to regen
bfd-in2.h but then decided to do something about the silly formatting
of these comments in bfd-in2.h. eg. the BFD_RELOC_MICROBLAZE_32_NONE
comment:
-/* This is a 32 bit reloc that stores the 32 bit pc relative
-value in two words (with an imm instruction).No relocation is
-done here - only used for relaxing */
+ /* This is a 32 bit reloc that stores the 32 bit pc relative value in
+ two words (with an imm instruction). No relocation is done here -
+ only used for relaxing. */
BFD_RELOC_MICROBLAZE_32_NONE,
You'll notice how the second and third line of the original comment
aren't indented properly relative to the first line, and the whole
comment needs to be indented to match the code.
I've also edited reloc.c ENUMDOC paragraphs. Some of these had excess
indentation, presumably in an attempt to properly indent bfd-in2.h
comments but that fails due to chew.c removing leading whitespace
early by skip_white_and_stars. COMMENT was used in reloc.c to add
extra blank lines in bfd-in2.h. I've removed them too as I don't
think they add anything to readability of that file. (Perhaps more
usefully, they also add blank lines to libbfd.h separating relocs for
one target from others, but this isn't done consistently.)
* doc/chew.c (drop, idrop): Move earlier.
(strip_trailing_newlines): Check index before accessing array,
not after.
(wrap_comment): New function.
(main): Add "wrap_comment" intrinsic.
* doc/proto.str (ENUMDOC): Use wrap_comment.
(make_enum_header, ENDSENUM): Put start and end braces on
separate lines.
* reloc.c: Remove uses of COMMENT and edit ENUMDOC paragraphs.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
|
|
This patch adds the R_MICROBLAZE_32_NONE relocation type.
This is a 32-bit reloc that stores the 32-bit pc relative
value in two words (with an imm instruction).
Add test case to gas test suite.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michael J. Eager <eager@eagercon.com>
|
|
This reverts commit 6bbf249557ba17cfebe01c67370df4da9e6a56f9.
Maciej W. Rozycki <macro@orcam.me.uk>:
Yet it has caused numerous regressions:
microblaze-elf +FAIL: unordered .debug_info references to .debug_ranges
microblaze-elf +FAIL: binutils-all/pr26548
microblaze-elf +FAIL: readelf -Wwi pr26548e (reason: unexpected output)
microblaze-elf +FAIL: readelf --debug-dump=loc locview-1 (reason: unexpected output) Yet it has caused numerous regressions:
microblaze-elf +FAIL: unordered .debug_info references to .debug_ranges
microblaze-elf +FAIL: binutils-all/pr26548
microblaze-elf +FAIL: readelf -Wwi pr26548e (reason: unexpected output)
...
|
|
This patches adds new bsefi and bsifi instructions.
BSEFI- The instruction shall extract a bit field from a
register and place it right-adjusted in the destination register.
The other bits in the destination register shall be set to zero.
BSIFI- The instruction shall insert a right-adjusted bit field
from a register at another position in the destination register.
The rest of the bits in the destination register shall be unchanged.
Further documentation of these instructions can be found here:
https://docs.xilinx.com/v/u/en-US/ug984-vivado-microblaze-ref
This patch has been tested for years of AMD Xilinx Yocto
releases as part of the following patch set:
https://github.com/Xilinx/meta-xilinx/tree/master/meta-microblaze/recipes-devtools/binutils/binutils
Signed-off-by: nagaraju <nagaraju.mekala@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michael J. Eager <eager@eagercon.com>
|
|
This reverts commit 06e8d9861d16c5b7e6920ad0e89889ccf45c575a.
|
|
The new Synopsys's ARCv3 ISA is capable to run either 64-bit or
32-bit ISA. The new 32-bit ISA is not compatible with the old
Synopsys ARCv1/ARCv2 ISA, however, it retains a lot of common
concepts. Thus, this patch is reusing the old ARC BFD backend and
adds the necessary bits for the new architecture in a similar way as
it is done for RISCV backend.
bfd/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
Cupertino Miranda <cupertinomiranda@gmail.com>
* bfd/Makefile.am: Add ARC64 files.
* bfd/Makefile.in: Regerate.
* bfd/arc-got.h (TCB_SIZE): Depends on the target architecture.
(GOT_ENTRY_SIZE): New define.
(write_in_got): Likewise.
(read_from_got): Likewise.
(align_power): Likewise.
(arc_got_entry_type_for_reloc): Use RELA_SIZE and GOT_ENTRY_SIZE.
(arc_fill_got_info_for_reloc): Update formating.
(relocate_fix_got_relocs_for_got_info): Likewise.
(arc_static_sym_data): Deleted structure.
(get_static_sym_data): Deleted function.
(relocate_fix_got_relocs_for_got_info): Use symbol static data.
(create_got_dynrelocs_for_single_entry): Update formating.
(create_got_dynrelocs_for_got_info): Likewise.
* bfd/arc-plt.c: New file.
* bfd/arc-plt.def: Add ARC64 PLT entry.
* bfd/arc-plt.h: Clean it up, move functionality to arc-plt.c file.
* bfd/archures.c: Add ARC64 target.
* bfd/config.bfd: Likewise.
* bfd/configure.ac: Likewise.
* bfd/bfd-in2.h: Regenerate.
* bfd/configure: Likewise.
* bfd/libbfd.h: Likewise.
* bfd/cpu-arc.c: Clean it up.
* bfd/cpu-arc64.c: New file.
* bfd/elf32-arc.c: Renamed to elfnn-arc.c.
* bfd/elfnn-arc.c: New file.
* bfd/reloc.c: Add new ARC64 relocs.
* bfd/targets.c: Add ARC64 target.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
|
|
There isn't any reason to think that a particular buffer size is
ideal in bfd, so let's just not define it.
* libbfd-in.h (DEFAULT_BUFFERSIZE): Don't define.
* libbfd.h: Regenerate.
* archive.c (AR_WRITE_BUFFERSIZE): Substitute value.
* vms-lib.c (_bfd_vms_lib_write_archive_contents): Likewise.
* coff-rs6000.c (do_copy): Likewise, and use sizeof.
|
|
|
|
These were renamed from bfd_read and bfd_write back in 2001 when they
lost an unnecessary parameter. Rename them back, and get rid of a few
casts that are only needed without prototyped functions (K&R C).
|
|
This reverts commit 675b9d612cc59446e84e2c6d89b45500cb603a8d.
See https://sourceware.org/pipermail/binutils/2023-August/128761.html.
|
|
|
|
This patch adds support for the V4 BPF instruction jal/gotol, which is
like ja/goto but it supports a signed 32-bit PC-relative (in number of
64-bit words minus one) target operand instead of the 16-bit signed
operand of the other instruction. This greatly increases the jump
range in BPF programs.
Tested in bpf-unkown-none.
bfd/ChangeLog:
2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* reloc.c: New reloc BFD_RELOC_BPF_DISPCALL32.
* elf64-bpf.c (bpf_reloc_type_lookup): Handle the new reloc.
* libbfd.h (bfd_reloc_code_real_names): Regenerate.
gas/ChangeLog:
2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (struct bpf_insn): New field `id'.
(md_assemble): Save the ids of successfully parsed instructions
and use the new BFD_RELOC_BPF_DISPCALL32 whenever appropriate.
(md_apply_fix): Adapt to the new BFD reloc.
* testsuite/gas/bpf/jump.s: Test JAL.
* testsuite/gas/bpf/jump.d: Likewise.
* testsuite/gas/bpf/jump-pseudoc.d: Likewise.
* testsuite/gas/bpf/jump-be.d: Likewise.
* testsuite/gas/bpf/jump-be-pseudoc.d: Likewise.
* doc/c-bpf.texi (BPF Instructions): Document new instruction
jal/gotol.
Document new operand type disp32.
include/ChangeLog:
2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/bpf.h (enum bpf_insn_id): Add entry BPF_INSN_JAL.
(enum bpf_insn_id): Remove spurious entry BPF_INSN_CALLI.
opcodes/ChangeLog:
2023-07-23 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-opc.c (bpf_opcodes): Add entry for jal.
|
|
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
|
|
Gas defaults to emit R_LARCH_ADD64/R_LARCH_SUB64 unless explcitly declared
to emit R_LARCH_64_PCREL.
The LoongArch ABI at here:
https://github.com/loongson/la-abi-specs/blob/release/la-abi.adoc
bfd/ChangeLog:
* bfd-in2.h (not): Add R_LARCH_64_PCREL
* elfnn-loongarch.c (perform_relocation): Likewise.
* elfxx-loongarch.c: Likewise.
* libbfd.h: Likewise.
* reloc.c: Likewise.
gas/ChangeLog:
* config/tc-loongarch.c (loongarch_args_parser_can_match_arg_helper):
(md_apply_fix): Add R_LARCH_64_PCREL.
* testsuite/gas/loongarch/64_pcrel.d: New test.
* testsuite/gas/loongarch/64_pcrel.s: New test.
include/ChangeLog:
* elf/loongarch.h (RELOC_NUMBER): Add R_LARCH_64_PCREL.
ld/ChangeLog:
* testsuite/ld-loongarch-elf/ld-loongarch-elf.exp: Add test.
* testsuite/ld-loongarch-elf/64_pcrel.d: New test.
* testsuite/ld-loongarch-elf/64_pcrel.s: New test.
|
|
A number of backends want to return bfd_reloc_dangerous messaqes from
relocation special_function, and construct the message using asprintf.
Such messages are not freed anywhere, leading to small memory leaks
inside libbfd. To limit the leaks, I'd implemented a static buffer in
the ppc backends that was freed before use in asprintf output. This
patch extends that scheme to other backends using a shared static
buffer and goes further in freeing the buffer on any bfd_close.
The patch also fixes a few other cases where asprintf output was not
freed after use.
bfd/
* bfd.c (_input_error_msg): Make global and rename to..
(_bfd_error_buf): ..this.
(bfd_asprintf): New function.
(bfd_errmsg): Use bfd_asprintf.
* opncls.c (bfd_close_all_done): Free _buf_error_buf.
* elf32-arm.c (find_thumb_glue, find_arm_glue): Use bfd_asprintf.
* elf32-nios2.c (nios2_elf32_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_unhandled_reloc): Likewise.
* elf64-ppc.c (ppc64_elf_unhandled_reloc): Likewise.
* elfnn-riscv.c (riscv_resolve_pcrel_lo_relocs): Likewise.
(riscv_elf_relocate_section): Likewise.
* libbfd.h: Regenerate.
gas/
* read.c (read_end): Free current_name and current_label.
(do_s_func): Likewise on error path. strdup label.
ld/
* pe-dll.c (make_head, make_tail, make_one),
(make_singleton_name_thunk, make_import_fixup_entry),
(make_runtime_pseudo_reloc),
(pe_create_runtime_relocator_reference: Free oname after use.
|
|
Freeing ecoff_debug_info "pointers to the unswapped symbolic info"
isn't a simple matter, due to differing allocation strategies. In
_bfd_ecoff_slurp_symbolic_info the pointers are to objalloc memory.
In the ecoff linker they are to separately malloc'd memory. In gas we
have most (obj-elf) or all (obj-ecoff) into a single malloc'd buffer.
This patch fixes the leaks for binutils and ld, leaving the gas leaks
for another day. The mips elf backend already had this covered, and
the ecoff backend had a pointer, raw_syments used as a flag, so most
of the patch is moving these around a little so they are accessible
for both ecoff and elf.
include/
* coff/ecoff.h (struct ecoff_debug_info): Add alloc_syments.
bfd/
* libecoff.h (struct ecoff_tdata): Delete raw_syments.
* elfxx-mips.c (free_ecoff_debug): Delete. Replace uses with
_bfd_ecoff_free_ecoff_debug_info.
(_bfd_mips_elf_final_link): Init debug.alloc_syments.
* ecofflink.c (_bfd_ecoff_free_ecoff_debug_info): New function.
* ecoff.c (_bfd_ecoff_bfd_free_cached_info): Call
_bfd_ecoff_free_ecoff_debug_info.
(_bfd_ecoff_slurp_symbolic_info): Replace uses of raw_syments
with alloc_syments.
(ecoff_final_link_debug_accumulate): Likewise. Use
_bfd_ecoff_free_ecoff_debug_info.
(_bfd_ecoff_bfd_copy_private_bfd_data): Set alloc_syments for
copied output.
* elf64-alpha.c (elf64_alpha_read_ecoff_info): Use
_bfd_ecoff_free_ecoff_debug_info.
* libbfd-in.h (_bfd_ecoff_free_ecoff_debug_info): Declare.
* libbfd.h: Regenerate.
gas/
* config/obj-ecoff.c (ecoff_frob_file): Set alloc_syments.
* config/obj-elf.c (elf_frob_file_after_relocs): Likewise.
|
|
doc/bfdint.texi and comments in the aout and som code about this
function are just wrong, and its name is not very apt. Better would
be _bfd_mostly_destroy, and we certainly should not be saying anything
about the possibility of later recreating anything lost by this
function. What's more, if _bfd_free_cached_info is called when
creating an archive map to reduce memory usage by throwing away
symbols, the target _close_and_cleanup function won't have access to
tdata or section bfd_user_data to tidy memory. This means most of the
target _close_and_cleanup function won't do anything, and therefore
sometimes will result in memory leaks.
This patch fixes the documentation problems and moves most of the
target _close_and_cleanup code to target _bfd_free_cached_info.
Another notable change is that bfd_generic_bfd_free_cached_info is now
defined as _bfd_free_cached_info rather than _bfd_bool_bfd_true,
ie. the default now frees objalloc memory.
|
|
Add relax support and related relocs in bfd.
bfd/ChangeLog:
* bfd-in2.h: Add relocs related to relax.
* elfnn-loongarch.c (struct loongarch_elf_link_hash_table): New integer
pointer (data_segment_phase) to monitor the data segment phase.
(loongarch_elf_check_relocs): Swap B21/B26 reloc sequence.
(loongarch_elf_adjust_dynamic_symbol): Fix code format.
(loongarch_reloc_rewrite_imm_insn): Fix function call.
(perform_relocation): Handle new relocs related to relax.
(RELOCATE_CALC_PC32_HI20): Fix code format.
(RELOCATE_CALC_PC64_HI32): Likewise.
(loongarch_elf_relocate_section): Handle new relocs related to relax.
(loongarch_relax_delete_bytes): New function.
(loongarch_relax_pcala_addi): Likewise.
(loongarch_relax_pcala_ld): Likewise.
(bfd_elfNN_loongarch_set_data_segment_info): Likewise.
(loongarch_relax_align): Likewise.
(loongarch_elf_relax_section): Likewise.
(bfd_elfNN_bfd_relax_section): New macro define.
* elfxx-loongarch.c (reloc_bits): New bfd point parameter.
(reloc_bits_b16): Likewise.
(reloc_bits_b21): Likewise.
(reloc_bits_b26): Likewise.
(loongarch_adjust_reloc_bitsfield): Likewise.
(reloc_bits_pcrel20_s2): New function.
(loongarch_elf_add_sub_reloc): Likewise.
(loongarch_elf_add_sub_reloc_uleb128): Likewise.
(loongarch_write_unsigned_leb128): New function.
* elfxx-loongarch.h (loongarch_adjust_reloc_bitsfield): New bfd point
parameter.
(bfd_elf32_loongarch_set_data_segment_info): New declare.
(bfd_elf64_loongarch_set_data_segment_info): Likewise.
(loongarch_write_unsigned_leb128): Likewise.
* libbfd.h: Add relocs related to relax.
* reloc.c: Add relocs related to relax.
|
|
https://github.com/riscv-non-isa/riscv-elf-psabi-doc/commit/96d6e190e9fc04a8517f9ff7fb9aed3e9876cbd6
There are some known limitations for now,
* Do not shrink the length of the uleb128 value, even if the value is reduced
after relaxations. Also reports error if the length grows up.
* The R_RISCV_SET_ULEB128 needs to be paired with and be placed before the
R_RISCV_SUB_ULEB128.
bfd/
* bfd-in2.h: Regenerated.
* elfnn-riscv.c (perform_relocation): Perform R_RISCV_SUB_ULEB128 and
R_RISCV_SET_ULEB128 relocations. Do not shrink the length of the
uleb128 value, and report error if the length grows up. Called the
generic functions, _bfd_read_unsigned_leb128 and _bfd_write_unsigned_leb128,
to encode the uleb128 into the section contents.
(riscv_elf_relocate_section): Make sure that the R_RISCV_SET_ULEB128
must be paired with and be placed before the R_RISCV_SUB_ULEB128.
* elfxx-riscv.c (howto_table): Added R_RISCV_SUB_ULEB128 and
R_RISCV_SET_ULEB128.
(riscv_reloc_map): Likewise.
(riscv_elf_ignore_reloc): New function.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_RISCV_SET_ULEB128, BFD_RELOC_RISCV_SUB_ULEB128):
New relocations to support .uleb128 subtraction.
gas/
* config/tc-riscv.c (md_apply_fix): Added BFD_RELOC_RISCV_SET_ULEB128
and BFD_RELOC_RISCV_SUB_ULEB128.
(s_riscv_leb128): Updated to allow uleb128 subtraction.
(riscv_insert_uleb128_fixes): New function, scan uleb128 subtraction
expressions and insert fixups for them.
(riscv_md_finish): Called riscv_insert_uleb128_fixes for all sections.
include/
* elf/riscv.h ((R_RISCV_SET_ULEB128, (R_RISCV_SUB_ULEB128): Defined.
ld/
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
* testsuite/ld-riscv-elf/uleb128*: New testcase for uleb128 subtraction.
binutils/
* testsuite/binutils-all/nm.exp: Updated since RISCV supports .uleb128.
|
|
The ptr and size args are unused. Make the function look the same as
bfd_make_empty_symbol.
|
|
bfd/doc/chew.c extracts documentation from source code comments
annotated with keywords, and generates much of bfd.h and libbfd.h from
those same comments. The docs have suffered from people (me too)
adding things like CODE_FRAGMENT to the source to put code into bfd.h
without realising that CODE_FRAGMENT also puts @example around said
code into the docs. So we have random senseless things in the docs.
This patch fixes that problem (well, the senseless things from
CODE_FRAGMENT), moves most of the code out of bfd-in.h, and improves a
few chew.c features. libbfd.h now automatically gets ATTRIBUTE_HIDDEN
prototypes, and indentation in bfd.h and libbfd.h is better.
|
|
These functions don't belong in opncls.c.
* libbfd-in.h (bfd_release): Delete prototype.
* opncls.c (bfd_alloc, bfd_zalloc, bfd_release): Move to..
* libbfd.c: ..here. Include objalloc.c and provide bfd_release
with a FUNCTION comment.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
|
|
Commit de7b90610e9e left a hole in the element checking, explained by
the comment added to _bfd_xcoff_openr_next_archived_file. While
fixing this, tidy some types used to hold unsigned values so that
casts are not needed to avoid signed/unsigned comparison warnings.
Also tidy a few things in xcoff.h.
bfd/
* coff-rs6000.c (_bfd_xcoff_openr_next_archived_file): Check
that we aren't pointing back at the last element. Make
filestart a ufile_ptr. Update for xcoff_artdata change.
(_bfd_strntol, _bfd_strntoll): Return unsigned values.
(_bfd_xcoff_slurp_armap): Make off a ufile_ptr.
(add_ranges): Update for xcoff_artdata change.
* libbfd-in.h (struct artdata): Make first_file_filepos a
ufile_ptr.
* libbfd.h: Regenerate.
include/
* coff/xcoff.h (struct xcoff_artdata): Replace min_elt with
ar_hdr_size.
(xcoff_big_format_p): In the !SMALL_ARCHIVE case return true
for anything but a small archive.
|
|
This element is unused. Ideally we'd be moving archive_head and
other archive specific fields from struct bfd to here, but that's a
much larger change than this little bit of cleanup.
* libbfd-in.h (struct artdata): Delete archive_head.
* libbfd.h: Regenerate.
* archive.c,
* coff-rs6000.c,
* coff64-rs6000.c: Delete comments mentioning artdata archive_head.
|
|
A case of a string section ending with an unterminated string. Fix it
by allocating one more byte and making it zero. Also make functions
reading the data return void* so that casts are not needed.
* ecoff.c (READ): Delete type param. Allocate one extra byte
to terminate string sections with a NUL. Adjust invocation.
* elfxx-mips.c (READ): Likewise.
* libbfd-in.h (_bfd_alloc_and_read): Return a void*.
(_bfd_malloc_and_read): Likewise.
* libbfd.h: Regenerate.
|
|
* dwarf1.c (_bfd_dwarf1_cleanup_debug_info): New function.
* libbfd-in.h (_bfd_dwarf1_cleanup_debug_info): Declare.
* elf.c (_bfd_elf_close_and_cleanup): Call it.
* elf-bfd.h (struct elf_obj_tdata): Make dwarf1_find_line_info
a void*.
* libbfd.h: Regenerate.
|
|
- Removed not needed relocations.
- Renamed relocations to match llvm and linux kernel.
Relocation changes:
R_BPF_INSN_64 => R_BPF_64_64
R_BPF_INSN_DISP32 => R_BPF_64_32
R_BPF_DATA_32 => R_BPF_64_ABS32
R_BPF_DATA_64 => R_BPF_64_ABS64
ChangeLog:
* bfd/bpf-reloc.def: Created file with BPF_HOWTO macro entries.
* bfd/reloc.c: Removed non needed relocations.
* bfd/bfd-in2.h: regenerated.
* bfd/libbfd.h: regenerated.
* bfd/elf64-bpf.c: Changed relocations.
* include/elf/bpf.h: Adapted relocation values/names.
* gas/config/tc-bpf.c: Changed relocation mapping.
|
|
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
|
|
Commit 5aa0f10c424e added a per_xvec_warn array to provide support for
warnings from elf_object_p (and a later patch for warnings from
pe_bfd_object_p) to be cached and then only printed if the target
matches. It was quite limited in the style of message supported, only
one message could be printed, and didn't really meet the stated aim of
only warning when a target matches: There are many other errors and
warnings that can be emitted by functions called from elf_object_p.
So this patch extends the error handler functions to support printing
to a string buffer, extends per_xvec_warn to support multiple errors/
warnings, and hooks this all into bfd_check_format_matches. If
bfd_check_format_matches succeeds then any errors/warnings are printed
for the matching target. If bfd_check_format_matches fails either due
to no match or to multiple matches and only one target vector produced
errors, then those errors are printed.
* bfd.c (MAX_ARGS): Define, use throughout.
(print_func): New typedef.
(_bfd_doprnt): Add new print param. Replace calls to fprintf
with print.
(PRINT_TYPE): Similarly.
(error_handler_fprintf): Renamed from error_handler_internal.
Use _bfd_get_error_program_name. Add fprintf arg. Move code
setting up args..
(_bfd_doprnt_scan): ..to here. Add ap param.
(struct buf_stream): New.
(err_sprintf): New function.
(error_handler_bfd): New static variable.
(error_handler_sprintf): New function.
(_bfd_set_error_handler_caching): New function.
(_bfd_get_error_program_name): New function.
* elfcode.h (elf_swap_shdr_in): Use _bfd_error_handler in
warning messages.
(elf_object_p): Likewise.
* format.c (print_warnmsg): New function.
(clear_warnmsg): Rewrite.
(null_error_handler): New function.
(bfd_check_format_matches): Ignore warnings from recursive calls
checking first element of an archive. Use caching error handler
otherwise. Print warnings on successful match, or when only one
target has emitted warnings/errors.
* peicode.h (pe_bfd_object_p): Use _bfd_error_handler in
warning messages.
* targets.c (per_xvec_warn): Change type of array elements.
(struct per_xvec_message): New.
(_bfd_per_xvec_warn): Rewrite.
* Makefile.am (LIBBFD_H_FILES): Add bfd.c.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
|
|
This patch provides a new function to sanity check section sizes.
It's mostly extracted from what we had in bfd_get_full_section_contents
but also handles compressed debug sections.
Improvements are:
- section file offset is taken into account,
- added checks that a compressed section can be read from file.
The function is then used when handling multiple .debug_* sections
that need to be read into a single buffer, to sanity check sizes
before allocating the buffer.
PR 26946, PR 28834
* Makefile.am (LIBBFD_H_FILES): Add section.c.
* compress.c (bfd_get_full_section_contents): Move section size
sanity checks..
* section.c (_bfd_section_size_insane): ..to here. New function.
* dwarf2.c (read_section): Use _bfd_section_size_insane.
(_bfd_dwarf2_slurp_debug_info): Likewise.
* Makefile.in: Regenerate.
* libbfd.h: Regenerate.
|
|
bfd_malloc_and_get_section performs some sanity checks on the section
size before allocating memory. This patch avails the stab
nearest_line code of that sanity checking, and tidies up memory
afterward.
* coffgen.c (_bfd_coff_close_and_cleanup): Call _bfd_stab_cleanup.
* elf.c (_bfd_elf_close_and_cleanup): Likewise.
* syms.c (_bfd_stab_section_find_nearest_line): Set *pinfo earlier.
Use bfd_malloc_and_get_section. Free malloc'd buffers on failure.
Malloc indextable.
(_bfd_stab_cleanup): New function.
* libbfd-in.h (_bfd_stab_cleanup): Declare.
* libbfd.h: Regnerate.
|
|
elfcode.h can emit three warnings in elf_object_p for various things,
"section extending past end of file", "corrupt string table index",
and "program header with invalid alignment". The problem with doing
this is that the warning can be emitted for multiple possible targets
as each one is tried. I was looking at a fuzzer testcase that had an
object file with 6144 program headers, 5316 of which had invalid
alignment. It would be bad enough to get 5316 messages all the same,
but this object was contained in an archive and resulted in 4975776
repeats.
Some trimming can be done by not warning if the bfd is already marked
read_only, as is done for the "section extending past end of file"
warning, but that still results in an unacceptable number of
warnings for object files in archives. Besides that, it is just wrong
to warn about a problem detected by a target elf_object_p other than
the one that actually matches. At some point we might have more
target specific warnings.
So what to do? One obvious solution is to remove the warnings.
Another is to poke any warning strings into the target xvec, emitting
them if that xvec is the final one chosen. This also has the benefit
of solving the archive problem. A warning when recursing into
_bfd_check_format for the first element of the archive (to find the
correct target for the archive) will still be on the xvec at the point
that target is chosen for the archive. However, target xvecs are
read-only. Thus the need for per_xvec_warn to logically extend
bfd_target with a writable field. I've made per_xvec_warn one larger
than bfd_target_vector to provide one place for user code that makes
private copies of target xvecs.
* elfcode.h (elf_swap_shdr_in, elf_object_p): Stash potential
warnings in _bfd_per_xvec_warn location.
* format.c (clear_warnmsg): New function.
(bfd_check_format_matches): Call clear_warnmsg before trying
a new xvec. Print warnings for the successful non-archive
match.
* targets.c: Include libiberty.h.
(_bfd_target_vector_entries): Use ARRAY_SIZE.
(per_xvec_warn): New.
(_bfd_per_xvec_warn): New function.
* Makefile.am (LIBBFD_H_FILES): Add targets.c.
* Makefile.in: Regenerate.
* libbfd.h: Regenerate.
|
|
bfd_find_nearest_line_with_alt functions like bfd_find_nearest_line with
the addition of a parameter for specifying the filename of a supplementary
debug file such as one referenced by .gnu_debugaltlink or .debug_sup.
This patch focuses on implementing bfd_find_nearest_line_with_alt
support for ELF/DWARF2 .gnu_debugaltlink. For other targets this
function simply sets the invalid_operation bfd_error.
|
|
Some R_LARCH_64 in section .eh_frame will to generate
R_LARCH_NONE, we change relocation to R_LARCH_32_PCREL
from R_LARCH_64 in setction .eh_frame and not generate
dynamic relocation for R_LARCH_32_PCREL.
Add New relocate type R_LARCH_32_PCREL for .eh_frame.
include/elf/
loongarch.h
bfd/
bfd/bfd-in2.h
libbfd.h
reloc.c
elfxx-loongarch.c
elfnn-loongarch.c
gas/config/
tc-loongarch.c
binutils/
readelf.c
ld/testsuite/ld-elf/
eh5.d
|
|
Define new reloc types according to linker needs.
include/elf/
loongarch.h
bfd/
bfd-in2.h
libbfd.h
reloc.c
elfnn-loongarch.c
elfxx-loongarch.c
elfxx-loongarch.h
|
|
Commit 04f096fb9e25 ("Move the xc16x target to the obsolete list") moved
the architecture from the "obsolete but still available" to the
"obsolete / support removed" list in config.bfd, making the architecture
impossible to enable (except maybe via "enable everything" options").
Note that I didn't touch */po/*.po{,t} on the assumption that these
would be updated by some (half)automatic means.
|
|
MIPS should not be using BFD_RELOC_16 for its R_MIPS_16 relocation,
since R_MIPS_16 specifies a 16-bit field in a 32-bit word.
BFD_RELOC_16, emitted by generic code to handle fixups on 16-bit data
directives, expects fixups to operate on the whole of a 16-bit word.
This patch corrects the problem by using BFD_RELOC_MIPS_16, a new bfd
reloc that is used to generate R_MIPS_16. BFD_RELOC_16 is handled in
md_apply_fix for cases where the fixup can be applied at assembly
time. Like BFD_RELOC_8, BFD_RELOC_16 now has no corresponding object
file relocation, and thus .half, .hword, .short and .dc.w must be
resolved at assembly time. BFD_RELOC_MIPS_REL16 is removed by this
patch since it isn't used.
PR 3243
PR 26542
* reloc.c (BFD_RELOC_MIPS_16): Rename from BFD_RELOC_MIPS_REL16.
* elf32-mips.c (mips_reloc_map): Map BFD_RELOC_MIPS_16 to R_MIPS_16.
* elf64-mips.c (mips_reloc_map): Likewise, delete BFD_RELOC_MIPS_REL16.
* elfn32-mips.c (mips_reloc_map): Likewise.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-mips.c (append_insn): Handle BFD_RELOC_MIPS_16.
(macro_build): Likewise.
(mips_percent_op <%half>): Generate BFD_RELOC_MIPS_16.
(md_apply_fix): Handle BFD_RELOC_16 and BFD_RELOC_MIPS_16 when fx_done.
ld/
* testsuite/ld-mips-elf/reloc-local-overflow.d,
* testsuite/ld-mips-elf/reloc-local-overflow.s: Rewrite.
|
|
bfd * coff-i386.c (in_reloc_p): Add R_SECTION.
(howto_table): Add R_SECTION.
(coff_pe_i386_relocation_section): Add support for R_SECTION.
(coff_i386_reloc_type_lookup): Add support for
BFD_RELOC_16_SECCIDX.
* coff-x86_64.c (in_reloc_p): Add R_SECTION.
(howto_table): Add R_SECTION.
(coff_pe_amd64_relocation_section): Add support for R_SECTION.
(coff_amd64_reloc_type_lookup): Add support for
BFD_RELOC_16_SECCIDX.
* reloc.c: Add BFD_RELOC_16_SECIDX.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas * config/tc-i386.c (pe_directive_secidx): New function.
(md_pseudo_table): Add support for secidx.
(x86_cons_fix_new): Likewise.
(tc_gen_reloc): Likewise.
* expr.c (op_rank): Add O_secidx.
* expr.h (operatorT): Likewise.
* symbols.c (resolve_symbol_value): Add support for O_secidx.
* testsuite/gas/i386/secidx.s: New test source file.
* testsuite/gas/i386/secidx.d: New test driver file.
* testsuite/gas/i386/i386.exp: Run new test.
include * coff/i386.h: Define R_SECTION.
* coff/x86_64.h: Likewise.
ld * testsuite/ld-pe/secidx1.s: New test source file.
* testsuite/ld-pe/secidx2.s: New test source file.
* testsuite/ld-pe/secidx.d: New test driver file.
* testsuite/ld-pe/secidx_64.d: New test driver file.
* testsuite/ld-pe/pe.exp: Add new tests.
|
|
Improve thin archive member error message with:
ld: libbar.a(bar.o): error opening thin archive member: No such file or directory
instead of
ld: libbar.a: error adding symbols: No such file or directory
PR ld/28722
* archive.c (_bfd_get_elt_at_filepos): Add a pointer argument
for struct bfd_link_info. Call linker callback when failing to
open thin archive member.
(_bfd_generic_get_elt_at_index): Pass NULL to
_bfd_get_elt_at_filepos.
(bfd_generic_openr_next_archived_file): Likewise.
* coff-alpha.c (alpha_ecoff_get_elt_at_filepos): Add a pointer
argument for struct bfd_link_info and pass it to
_bfd_get_elt_at_filepos.
(alpha_ecoff_openr_next_archived_file): Pass NULL to
_bfd_get_elt_at_filepos.
(alpha_ecoff_get_elt_at_index): Likewise.
* coff-rs6000.c (_bfd_xcoff_openr_next_archived_file): Likewise.
* ecoff.c (ecoff_link_add_archive_symbols): Pass info to
backend->get_elt_at_filepos.
* elflink.c (elf_link_is_defined_archive_symbol): info to
_bfd_get_elt_at_filepos.
* libbfd-in.h (_bfd_get_elt_at_filepos): Add a pointer argument
for struct bfd_link_info.
* libbfd.h: Regenerate.
* libecoff.h (ecoff_backend_data): Add a pointer argument for
struct bfd_link_info to get_elt_at_filepos.
* linker.c (_bfd_generic_link_add_archive_symbols): Pass info to
_bfd_get_elt_at_filepos.
|
