aboutsummaryrefslogtreecommitdiff
path: root/Makefile.in
AgeCommit message (Collapse)AuthorFilesLines
2021-05-18sim: depend on gnulibMike Frysinger1-0/+1
We're going to start using gnulib in the sim, so make sure it exists. ChangeLog: * Makefile.def: Add configure-sim dependency on all-gnulib. * Makefile.in: Regenerated.
2021-03-18Add install dependencies for ld -> bfd and libctf -> bfdNick Alcock1-1/+6
This stops problems parallel-installing if a relink of libctf is needed. Also adds corresponding install-strip dependencies. ChangeLog 2021-03-18 Nick Alcock <nick.alcock@oracle.com> PR libctf/27482 * Makefile.def: Add install-bfd dependencies for install-libctf and install-ld, and install-strip-bfd dependencies for install-strip-libctf and install-strip-ld; move the install-ld dependency on install-libctf to join it. * Makefile.in: Regenerated.
2021-03-12sim: drop dep on configure-gdbMike Frysinger1-1/+0
I'm not entirely sure why this is here since the sim doesn't use anything from the gdb/ dir directly, and the commit that added it included a bunch more changes and doesn't seem to call out this dep specifically.
2021-01-27ld: depend on libctfNick Alcock1-0/+1
Since ld may depend on libctf (if present), and libctf may be relinked by the installation process, libctf must be installed before ld is, or the relink may fail if it calls on symbols or symbol versions that do not exist in any libctf already present on the system. (If none is present, the copy in the build tree will be automatically used, but if one *is* present, it may take precedence and break things.) (This is a maybe- dependency, so it will work even if libctf is disabled.) ChangeLog 2021-01-26 Nick Alcock <nick.alcock@oracle.com> PR 27250 * Makefile.def: Add install-libctf dependency to install-ld. * Makefile.in: Regenerated.
2021-01-09Support the PGO build for binutils+gdbH.J. Lu1-2/+61
Add the --enable-pgo-build[=lto] configure option. When binutils+gdb is not built together with GCC, --enable-pgo-build enables the PGO build: 1. First build with -fprofile-generate. 2. Use "make maybe-check-*" to generate profiling data and pass -i to make to ignore errors when generating profiling data. 3. Use "make clean" to remove the previous build. 4. Rebuild with -fprofile-use. With --enable-pgo-build=lto, -flto=jobserver -ffat-lto-objects are used together with -fprofile-generate and -fprofile-use. Add '+' to the command line for recursive make to support -flto=jobserver -ffat-lto-objects. NB: --enable-pgo-build=lto enables the PGO build with LTO while --enable-lto enables LTO support in toolchain. PR binutils/26766 * Makefile.tpl (BUILD_CFLAGS): New. (CFLAGS): Append $(BUILD_CFLAGS). (CXXFLAGS): Likewise. (PGO_BUILD_GEN_FLAGS_TO_PASS): New. (PGO_BUILD_TRAINING_CFLAGS): Likewise. (PGO_BUILD_TRAINING_CXXFLAGS): Likewise. (PGO_BUILD_TRAINING_FLAGS_TO_PASS): Likewise. (PGO_BUILD_TRAINING_MFLAGS): Likewise. (PGO_BUILD_USE_FLAGS_TO_PASS): Likewise. (PGO-TRAINING-TARGETS): Likewise. (PGO_BUILD_TRAINING): Likewise. (all): Add '+' to the command line for recursive make. Support the PGO build. * configure.ac: Add --enable-pgo-build[=lto]. AC_SUBST PGO_BUILD_GEN_CFLAGS, PGO_BUILD_USE_CFLAGS and PGO_BUILD_LTO_CFLAGS. Enable the PGO build in Makefile. * Makefile.in: Regenerated. * configure: Likewise.
2021-01-09GCC: Pass --plugin to AR and RANLIBH.J. Lu1-2/+3
Detect GCC LTO plugin. Pass --plugin to AR and RANLIB to support LTO build. * Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. * configure.ac: Include config/gcc-plugin.m4. AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and RANLIB if possible. * Makefile.in: Regenerated. * configure: Likewise. config/ * gcc-plugin.m4 (GCC_PLUGIN_OPTION): New. libiberty/ * Makefile.in (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. (configure_deps): Depend on ../config/gcc-plugin.m4. * aclocal.m4: Include ../config/gcc-plugin.m4. * configure.ac: AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * configure: Regenerated. zlib/ * configure: Regenerated.
2021-01-05libctf: new testsuiteNick Alcock1-0/+13
This introduces a new lookup testsuite under libctf, which operates by compiling (with libtool) a "lookup" .c file that uses libctf to analyze some other program, then compiling some number of test object files with CTF and optionally linking them together and running the lookup program on the test object files (or linked test binary), before diffing the result much as run_dump_test does. This lets us test the portions of libctf that are not previously testable, notably the portions that do lookup on linked output and that create dynamic dictionaries and then do lookup on them before writing them out, something that is not tested by the ld-ctf testsuite because the linker never does this. A couple of simple tests are added: one testing the functionality of enum lookups, and one testing that the recently-added commit adding extra paranoia to incomplete type handling doesn't break linking and that the result of the link is an (otherwise-impossible) array of forward type in the shared CTF dict. ChangeLog 2021-01-05 Nick Alcock <nick.alcock@oracle.com> * Makefile.def (libctf): No longer no_check. Checking depends on all-ld. * Makefile.in: Regenerated. libctf/ChangeLog 2021-01-05 Nick Alcock <nick.alcock@oracle.com> * Makefile.am (EXPECT): New. (RUNTEST): Likewise. (RUNTESTFLAGS): Likewise. (CC_FOR_TARGET): Likewise. (check-DEJAGNU): Likewise. (AUTOMAKE_OPTIONS): Add dejagnu. * Makefile.in: Regenerated. * testsuite/config/default.exp: New. * testsuite/lib/ctf-lib.exp: Likewise. * testsuite/libctf-lookup/enum.lk: New test. * testsuite/libctf-lookup/enum-ctf.c: New CTF input. * testsuite/libctf-lookup/enum.c: New lookup test. * testsuite/libctf-lookup/ambiguous-struct*.c: New test. * testsuite/libctf-lookup/lookup.exp: New.
2020-10-14gdb/gdbserver: add dependencies for distclean-gnulibAndrew Burgess1-0/+2
After commit: commit 361cb219351d8b7e39e1962fe77f40aa80657b27 Date: Tue Oct 6 10:09:06 2020 +0100 gnulib: Ensure all libraries are used when building gdb/gdbserver We now get an error when, at the top level of the build tree, we do 'make distclean'. The reason for this is that the gnulib directory is cleaned before the gdb directory, cleaning gnulib deletes Makefile.gnulib.inc from the gnulib build directory, which is currently pulled in by the gdb Makefile.in using 'include'. This commit adds a dependency between distclean-gnulib and both distclean-gdb and distclean-gdbserver. This means that gdb and gdbserver will be cleaned before gnulib, as a result the Makefile.gnulib.inc file should exist when needed. ChangeLog: * Makefile.in: Rebuild. * Makefile.def: Make distclean-gnulib depend on distclean-gdb and distclean-gdbserver.
2020-03-12Change gdbserver to use existing gdbsupportTom Tromey1-0/+1
This changes the gdbserver build to use the gdbsupport that was built for gdb. gdbserver and gdbreplay now must use WIN32APILIBS (aka -lws2_32). Before this change, gdbserver did not define USE_WIN32API when building gdbsupport, but now this is always done. ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * Makefile.in: Rebuild. * Makefile.def (gdbserver): Depend on gdbsupport. gdbserver/ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac (GDBSERVER_DEPFILES): Remove srv_selftest_objs. (WIN32APILIBS): New subst. * Makefile.in (SFILES, OBS, TAGS, GDBREPLAY_OBS): Remove gdbsupport files. (gdbsupport/%.o): Remove target. (GDBSUPPORT_BUILDDIR, GDBSUPPORT): New variables. (gdbserver$(EXEEXT), gdbreplay$(EXEEXT)): Add GDBSUPPORT. (WIN32APILIBS): New variable. (gdbserver$(EXEEXT)): Add WIN32APILIBS. (gdbreplay$(EXEEXT)): Likewise.
2020-03-12Change gdbsupport not to rely on BFDTom Tromey1-2/+0
This changes gdbsupport so that it no longer relies on BFD. This is a precursor to making gdbserver use the already-built gdbsupport, because building gdbserver should not require BFD to be built. The most notable change here is that CORE_ADDR is always a 64-bit type. This makes it so that gdb acts as if it were always built in 64-bit mode. ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * Makefile.in: Rebuild. * Makefile.def (gdbsupport): Don't depend on bfd. gdbsupport/ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * common-types.h: Remove GDBSERVER code. (gdb_byte, CORE_ADDR, LONGEST, ULONGEST): Redefine. * common-defs.h: Remove GDBSERVER code.
2020-03-12Fix gdbserver build when intl already builtTom Tromey1-0/+2
gdbserver uses gdb's alloc.c, and this in turn can include headers from intl via gdbsupport/gdb_locale.h. This can cause build failures in some situations, for example if you build gdb and gdbserver on mingw. This patch restores the gdbsupport dependency on intl, and changes gdbserver to use ZW_GNU_GETTEXT_SISTER_DIR. This fixes this build problem. ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * Makefile.in: Rebuild. * Makefile.def (gdbsupport): Depend on intl. gdbserver/ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * config.in, configure: Rebuild. * configure.ac: Call ZW_GNU_GETTEXT_SISTER_DIR. * acinclude.m4: Include gettext-sister.m4. * Makefile.in (top_builddir, INTL, INTL_DEPS, INTL_CFLAGS): New variables. (INCLUDE_CFLAGS): Add INTL_CFLAGS. (gdbserver$(EXEEXT), gdbreplay$(EXEEXT)): Use INTL_DEPS, INTL.
2020-02-14Change gdbserver to use existing gnulib and libibertyTom Tromey1-0/+4
This changes gdbserver so that it no longer builds its own gnulib and libiberty. Instead, it now relies on the ones that were already built at the top level. gdbsupport is still built specially for gdbserver. This is more complicated and will be tackled in a subsequent patch. ChangeLog 2020-02-14 Tom Tromey <tom@tromey.com> * Makefile.in: Rebuild. * Makefile.def: Make gdbserver require gnulib and libiberty. gdbserver/ChangeLog 2020-02-14 Tom Tromey <tom@tromey.com> * acinclude.m4: Don't include acx_configure_dir.m4. * Makefile.in (LIBIBERTY_BUILDDIR, GNULIB_BUILDDIR): Update. (SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): Remove. (all, install-only, uninstall, clean-info, clean) (maintainer-clean): Don't recurse. (subdir_do, all-lib): Remove. ($(LIBGNU) $(LIBIBERTY) $(GNULIB_H)): Remove rule. (GNULIB_H): Remove. (generated_files): Update. ($(GNULIB_BUILDDIR)/Makefile): Remove rule. * configure: Rebuild. * configure.ac: Don't configure gnulib or libiberty. (GNULIB): Update. gdbsupport/ChangeLog 2020-02-14 Tom Tromey <tom@tromey.com> * common-defs.h: Change path to gnulib/config.h. Change-Id: I469cbbf5db2ab37109c058e9e3a1e4f4dabdfc98
2020-02-07Move gdbserver to top levelTom Tromey1-0/+460
This patch moves gdbserver to the top level. This patch is as close to a pure move as possible -- gdbserver still builds its own variant of gnulib and gdbsupport. Changing this will be done in a separate patch. [v2] Note that, per Simon's review comment, this patch changes the tree so that gdbserver is not built for or1k or score. This makes sense, because there is apparently not actually a gdbserver port here. [v3] This version of the patch also splits out some configury into a new file, gdbserver/configure.host, so that the top-level configure script can simply rely on it in order to decide whether gdbserver should be built. [v4] This version adds documentation and removes some unnecessary top-level dependencies. [v5] Update docs to mention "make all-gdbserver" and change how top-level configure decides whether to build gdbserver, switching to a single, shared script. Tested by the buildbot. ChangeLog 2020-02-07 Tom Tromey <tom@tromey.com> Pedro Alves <palves@redhat.com> * src-release.sh (GDB_SUPPORT_DIRS): Add gdbserver. * gdbserver: New directory, moved from gdb/gdbserver. * configure.ac (host_tools): Add gdbserver. Only build gdbserver on certain systems. * Makefile.in, configure: Rebuild. * Makefile.def (host_modules, dependencies): Add gdbserver. * MAINTAINERS: Add gdbserver. gdb/ChangeLog 2020-02-07 Tom Tromey <tom@tromey.com> * README: Update gdbserver documentation. * gdbserver: Move to top level. * configure.tgt (build_gdbserver): Remove. * configure.ac: Remove --enable-gdbserver. * configure: Rebuild. * Makefile.in (distclean): Don't mention gdbserver. Change-Id: I826b7565b54604711dc7a11edea0499cd51ff39e
2020-01-17Make all-gdbsupport depend on all-bfdSimon Marchi1-0/+1
Trying to run "make all-gdbsupport" at the top-level in a build from scratch results in: make[2]: Entering directory '/home/smarchi/build/binutils-gdb/gdbsupport' CC agent.o In file included from /home/smarchi/src/binutils-gdb/gdbsupport/common-defs.h:133, from /home/smarchi/src/binutils-gdb/gdbsupport/agent.c:20: /home/smarchi/src/binutils-gdb/gdbsupport/common-types.h:35:10: fatal error: bfd.h: No such file or directory 35 | #include "bfd.h" | ^~~~~~~ Before building all-gdbsupport, we need all-bfd to run, so that bfd.h is generated. (Once this patch is merged in the binutils-gdb repo, I'll send it to gcc to keep the files in sync.) ChangeLog: * Makefile.def: Add dependencies of all-gdbsupport on all-bfd. * Makefile.in: Re-generate.
2020-01-14Move gdbsupport to the top levelTom Tromey1-0/+466
This patch moves the gdbsupport directory to the top level. This is the next step in the ongoing project to move gdbserver to the top level. The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport". This patch then adds a build system to gdbsupport and wires it into the top level. Then it changes gdb to use the top-level build. gdbserver, on the other hand, is not yet changed. It still does its own build of gdbsupport. ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport. * MAINTAINERS: Add gdbsupport. * configure: Rebuild. * configure.ac (configdirs): Add gdbsupport. * gdbsupport: New directory, move from gdb/gdbsupport. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * nat/x86-linux-dregs.c: Include configh.h. * nat/linux-ptrace.c: Include configh.h. * nat/linux-btrace.c: Include configh.h. * defs.h: Include config.h, bfd.h. * configure.ac: Don't source common.host. (CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files. * configure: Rebuild. * acinclude.m4: Update path. * Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables. (CONFIG_SRC_SUBDIR): Remove gdbsupport. (INTERNAL_CFLAGS_BASE): Add INCSUPPORT. (CLIBS): Add LIBSUPPORT. (CDEPS): Likewise. (COMMON_SFILES): Remove gdbsupport files. (HFILES_NO_SRCDIR): Likewise. (stamp-version): Update path to create-version.sh. (ALLDEPFILES): Remove gdbsupport files. gdb/gdbserver/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * server.h: Include config.h. * gdbreplay.c: Include config.h. * configure: Rebuild. * configure.ac: Don't source common.host. * acinclude.m4: Update path. * Makefile.in (INCSUPPORT): New variable. (INCLUDE_CFLAGS): Add INCSUPPORT. (SFILES): Update paths. (version-generated.c): Update path to create-version.sh. (gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths. gdbsupport/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * common-defs.h: Add GDBSERVER case. Update includes. * acinclude.m4, aclocal.m4, config.in, configure, configure.ac, Makefile.am, Makefile.in, README: New files. * Moved from ../gdb/gdbsupport/ Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2019-10-07gdb: CTF supportWeimin Pan1-0/+1
This patch adds the CTF (Compact Ansi-C Type Format) support in gdb. Two submissions on which this gdb work depends were posted earlier in May: * On the binutils mailing list - adding libctf which creates, updates, reads, and manipulates the CTF data. * On the gcc mailing list - expanding gcc to directly emit the CFT data with a new command line option -gt. CTF is a reduced form of debugging information whose main purpose is to describe the type of C entities such as structures, unions, typedefs and function arguments at the global scope only. It does not contain debug information about source lines, location expressions, or local variables. For more information on CTF, see the documentation in the libdtrace-ctf source tree, available here: <https://raw.githubusercontent.com/oracle/libdtrace-ctf/master/doc/ctf-format>. This patch expands struct elfinfo by adding the .ctf section, which contains CTF debugging info, and modifies elf_symfile_read() to read it. If both DWARF and CTF exist in a program, only DWARF will be read. CTF data will be read only when there is no DWARF. The two-stage symbolic reading and setting strategy, partial and full, was used. File ctfread.c contains functions to transform CTF data into gdb's internal symbol table structures by iterately reading entries from CTF sections of "data objects", "function info", "variable info", and "data types" when setting up either partial or full symbol table. If the ELF symbol table is available, e.g. not stripped, the CTF reader will associate the found type information with these symbol entries. Due to the proximity between DWARF and CTF (CTF being a much simplified subset of DWARF), some DWARF implementation was reused to support CTF. Test cases ctf-constvars.exp, ctf-cvexpr.exp, ctf-ptype.exp, and ctf-whatis.exp have been added to verify the correctness of this support. This patch has missing features and limitations which we will add and address in the future patches. gdb/ChangeLog +2019-10-07 Weimin Pan <weimin.pan@oracle.com> + + * gdb/ctfread.c: New file. + * gdb/ctfread.h: New file. + * gdb/elfread.c: Include ctfread.h. + (struct elfinfo text_p): New member ctfsect. + (elf_locate_sections): Mark CTF section. + (elf_symfile_read): Call elfctf_build_psymtabs. + * gdb/Makefile.in (LIBCTF): Add. + (CLIBS): Use it. + (CDEPS): Likewise. + (DIST): Add ctfread.c. + * Makefile.def (dependencies): Add all-libctf to all-gdb + * Makefile.in: Add "all-gdb: maybe-all-libctf" + gdb/testsuite/ChangeLog +2019-10-07 Weimin Pan <weimin.pan@oracle.com> + + * gdb.base/ctf-whatis.exp: New file. + * gdb.base/ctf-whatis.c: New file. + * gdb.base/ctf-ptype.exp: New file. + * gdb.base/ctf-ptype.c: New file. + * gdb.base/ctf-constvars.exp: New file. + * gdb.base/ctf-constvars.c: New file. + * gdb.base/ctf-cvexpr.exp: New file. +
2019-10-03libctf: installable libctf as a shared libraryNick Alcock1-2/+14
This lets other programs read and write CTF-format data. Two versioned shared libraries are created: libctf.so and libctf-nobfd.so. They contain identical content except that libctf-nobfd.so contains no references to libbfd and does not implement ctf_open, ctf_fdopen, ctf_bfdopen or ctf_bfdopen_ctfsect, so it can be used by programs that cannot use BFD, like readelf. The soname major version is presently .0 until the linker API stabilizes, when it will flip to .1 and hopefully never change again. New in v3. v4: libtoolize and turn into a pair of shared libraries. Drop --enable-install-ctf: now controlled by --enable-shared and --enable-install-libbfd, like everything else. v5: Add ../bfd to ACLOCAL_AMFLAGS and AC_CONFIG_MACRO_DIR. Fix tabdamage. * Makefile.def (host_modules): libctf is no longer no_install. * Makefile.in: Regenerated. libctf/ * configure.ac (AC_DISABLE_SHARED): New, like opcodes/. (LT_INIT): Likewise. (AM_INSTALL_LIBBFD): Likewise. (dlopen): Note why this is necessary in a comment. (SHARED_LIBADD): Initialize for possibly-PIC libiberty: derived from opcodes/. (SHARED_LDFLAGS): Likewise. (BFD_LIBADD): Likewise, for libbfd. (BFD_DEPENDENCIES): Likewise. (VERSION_FLAGS): Initialize, using a version script if ld supports one, or libtool -export-symbols-regex otherwise. (AC_CONFIG_MACRO_DIR): Add ../BFD. * Makefile.am (ACLOCAL_AMFLAGS): Likewise. (INCDIR): New. (AM_CPPFLAGS): Use $(srcdir), not $(top_srcdir). (noinst_LIBRARIES): Replace with... [INSTALL_LIBBFD] (lib_LTLIBRARIES): This, or... [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): ... this, mentioning new libctf-nobfd.la as well. [INSTALL_LIBCTF] (include_HEADERS): Add the CTF headers. [!INSTALL_LIBCTF] (include_HEADERS): New, empty. (libctf_a_SOURCES): Rename to... (libctf_nobfd_la_SOURCES): ... this, all of libctf other than ctf-open-bfd.c. (libctf_la_SOURCES): Now derived from libctf_nobfd_la_SOURCES, with ctf-open-bfd.c added. (libctf_nobfd_la_LIBADD): New, using @SHARED_LIBADD@. (libctf_la_LIBADD): New, using @BFD_LIBADD@ as well. (libctf_la_DEPENDENCIES): New, using @BFD_DEPENDENCIES@. * Makefile.am [INSTALL_LIBCTF]: Use it. * aclocal.m4: Add ../bfd/acinclude.m4, ../config/acx.m4, and the libtool macros. * libctf.ver: New, everything is version LIBCTF_1.0 currently (even the unstable components). * Makefile.in: Regenerated. * config.h.in: Likewise. * configure: Likewise. binutils/ * Makefile.am (LIBCTF): Mention the .la file. (LIBCTF_NOBFD): New. (readelf_DEPENDENCIES): Use it. (readelf_LDADD): Likewise. * Makefile.in: Regenerated. ld/ * configure.ac (TESTCTFLIB): Set to the .so or .a, like TESTBFDLIB. * Makefile.am (TESTCTFLIB): Use it. (LIBCTF): Use the .la file. (check-DEJAGNU): Use it. * Makefile.in: Regenerated. * configure: Likewise. include/ * ctf-api.h: Note the instability of the ctf_link interfaces.
2019-10-03bfd, ld: add CTF section linkingNick Alcock1-0/+7
This is quite complicated because the CTF section's contents depend on the final contents of the symtab and strtab, because it has two sections whose contents are shuffled to be in 1:1 correspondence with the symtab, and an internal strtab that gets deduplicated against the ELF strtab (with offsets adjusted to point into the ELF strtab instead). It is also compressed if large enough, so its size depends on its contents! So we cannot construct it as early as most sections: we cannot even *begin* construction until after the symtab and strtab are finalized. Thankfully there is already one section treated similarly: compressed debugging sections: the only differences are that compressed debugging sections have extra handling to deal with their changing name if compressed (CTF sections are always called ".ctf" for now, though we have reserved ".ctf.*" against future use), and that compressed debugging sections have previously-uncompressed content which has to be stashed away for later compression, while CTF sections have no content at all until we generate it (very late). BFD also cannot do the link itself: libctf knows how to do it, and BFD cannot call libctf directly because libctf already depends on bfd for file I/O. So we have to use a pair of callbacks, one, examine_strtab, which allows a caller to examine the symtab and strtab after finalization (called from elf_link_swap_symbols_out(), right before the symtabs are written, and after the strtab has been finalized), and one which actually does the emission (called emit_ctf simply because it is grouped with a bunch of section-specific late-emission function calls at the bottom of bfd_elf_final_link, and a section-specific name seems best for that). emit_ctf is actually called *twice*: once from lang_process if the emulation suggests that this bfd target does not examine the symtab or strtab, and once via a bfd callback if it does. (This means that non-ELF targets still get CTF emitted, even though the late CTF emission stage is never called for them). v2: merged with non-ELF support patch: slight commit message adjustments. v3: do not spend time merging CTF, or crash, if the CTF section is explicitly discarded. Do not try to merge or compress CTF unless linking. v4: add CTF_COMPRESSION_THRESHOLD. Annul the freed input ctf_file_t's after writeout: set SEC_IN_MEMORY on the output contents so a future bfd enhancement knows it could free it. Add SEC_LINKER_CREATED | SEC_KEEP to avoid having to add .ctf to the linker script. Drop now-unnecessary ldlang.h-level elf-bfd.h include and hackery around it. Adapt to elf32.em->elf.em and elf-generic.em->ldelf*.c changes. v5: fix tabdamage. Drop #inclusions in .h files: include in .c files, .em files, and use struct forwards instead. Use bfd_section_is_ctf inline function rather than SECTION_IS_CTF macro. Move a few comments. * Makefile.def (dependencies): all-ld depends on all-libctf. * Makefile.in: Regenerated. include/ * bfdlink.h (elf_strtab_hash): New forward. (elf_sym_strtab): Likewise. (struct bfd_link_callbacks <examine_strtab>): New. (struct bfd_link_callbacks <emit_ctf>): Likewise. bfd/ * elf-bfd.h (bfd_section_is_ctf): New inline function. * elf.c (special_sections_c): Add ".ctf". (assign_file_positions_for_non_load_sections): Note that compressed debugging sections etc are not assigned here. Treat CTF sections like SEC_ELF_COMPRESS sections when is_linker_output: sh_offset -1. (assign_file_positions_except_relocs): Likewise. (find_section_in_list): Note that debugging and CTF sections, as well as reloc sections, are assigned later. (_bfd_elf_assign_file_positions_for_non_load): CTF sections get their size and contents updated. (_bfd_elf_set_section_contents): Skip CTF sections: unlike compressed sections, they have no uncompressed content to copy at this stage. * elflink.c (elf_link_swap_symbols_out): Call the examine_strtab callback right before the strtab is written out. (bfd_elf_final_link): Don't cache the section contents of CTF sections: they are not populated yet. Call the emit_ctf callback right at the end, after all the symbols and strings are flushed out. ld/ * ldlang.h: (struct lang_input_statement_struct): Add the_ctf. (struct elf_sym_strtab): Add forward. (struct elf_strtab_hash): Likewise. (ldlang_ctf_apply_strsym): Declare. (ldlang_write_ctf_late): Likewise. * ldemul.h (ldemul_emit_ctf_early): New. (ldemul_examine_strtab_for_ctf): Likewise. (ld_emulation_xfer_type) <emit_ctf_early>: Likewise. (ld_emulation_xfer_type) <examine_strtab_for_ctf>: Likewise. * ldemul.c (ldemul_emit_ctf_early): New. (ldemul_examine_strtab_for_ctf): Likewise. * ldlang.c: Include ctf-api.h. (CTF_COMPRESSION_THRESHOLD): New. (ctf_output): New. Initialized in... (ldlang_open_ctf): ... this new function. Open all the CTF sections in the input files: mark them non-loaded and empty so as not to copy their contents to the output, but linker-created so the section gets created in the target. (ldlang_merge_ctf): New, merge types via ctf_link_add_ctf and ctf_link. (ldlang_ctf_apply_strsym): New, an examine_strtab callback: wrap ldemul_examine_strtab_for_ctf. (lang_write_ctf): New, write out the CTF section. (ldlang_write_ctf_late): New, late call via bfd's emit_ctf hook. (lang_process): Call ldlang_open_ctf, ldlang_merge_ctf, and lang_write_ctf. * ldmain.c (link_callbacks): Add ldlang_ctf_apply_strsym, ldlang_write_ctf_late. * emultempl/aix.em: Add ctf-api.h. * emultempl/armcoff.em: Likewise. * emultempl/beos.em: Likewise. * emultempl/elf.em: Likewise. * emultempl/generic.em: Likewise. * emultempl/linux.em: Likewise. * emultempl/msp430.em: Likewise. * emultempl/pe.em: Likewise. * emultempl/pep.em: Likewise. * emultempl/ticoff.em: Likewise. * emultempl/vanilla.em: Likewise. * ldcref.c: Likewise. * ldctor.c: Likewise. * ldelf.c: Likewise. * ldelfgen.c: Likewise. * ldemul.c: Likewise. * ldexp.c: Likewise. * ldfile.c: Likewise. * ldgram.c: Likewise. * ldlex.l: Likewise. * ldmain.c: Likewise. * ldmisc.c: Likewise. * ldver.c: Likewise. * ldwrite.c: Likewise. * lexsup.c: Likewise. * mri.c: Likewise. * pe-dll.c: Likewise. * plugin.c: Likewise. * ldelfgen.c (ldelf_emit_ctf_early): New. (ldelf_examine_strtab_for_ctf): tell libctf about the symtab and strtab. (struct ctf_strsym_iter_cb_arg): New, state to do so. (ldelf_ctf_strtab_iter_cb): New: tell libctf about each string in the strtab in turn. (ldelf_ctf_symbols_iter_cb): New, tell libctf about each symbol in the symtab in turn. * ldelfgen.h (struct elf_sym_strtab): Add forward. (struct elf_strtab_hash): Likewise. (struct ctf_file): Likewise. (ldelf_emit_ctf_early): Declare. (ldelf_examine_strtab_for_ctf): Likewise. * emultempl/elf-generic.em (LDEMUL_EMIT_CTF_EARLY): Set it. (LDEMUL_EXAMINE_STRTAB_FOR_CTF): Likewise. * emultempl/aix.em (ld_${EMULATION_NAME}_emulation): Add emit_ctf_early and examine_strtab_for_ctf, NULL by default. * emultempl/armcoff.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/beos.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/elf.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/generic.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/linux.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/msp430.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/pe.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/pep.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/ticoff.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/vanilla.em (ld_vanilla_emulation): Likewise. * Makefile.am: Pull in libctf (and zlib, a transitive requirement for compressed CTF section emission). Pass it on to DejaGNU. * configure.ac: Add AM_ZLIB. * aclocal.m4: Added zlib.m4. * Makefile.in: Regenerated. * testsuite/ld-bootstrap/bootstrap.exp: Use it when relinking ld.
2019-06-14Move gnulib to top levelTom Tromey1-0/+462
This patch moves the gdb/gnulib subdirectory to the top level. It adjusts the top-level build system to build gnulib when necessary, and changes gdb to use this. However, gdbserver still builds its own copy of gnulib, just from the new source location. A small hack was needed to ensure that gnulib is only built when gdb is enabled. The Makefile only provides an ordering -- the directory must be mentioned in configdirs to actually be compiled at all. Most of the patch is just a "git mv" of gnulib, though a few minor path adjustments were needed in some files there. Tested by the buildbot. ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * MAINTAINERS: Add gnulib. * gnulib: New directory, move from gdb/gnulib. * configure.ac (host_libs): Add gnulib. * configure: Rebuild. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * gnulib: Move directory to top-level. * configure.ac: Don't configure gnulib. * configure: Rebuild. * common/common-defs.h: Use new path to gnulib. * Makefile.in (GNULIB_BUILDDIR): Now ../gnulib. (GNULIB_H): Remove. (INCGNU): Look in new gnulib location. (HFILES_NO_SRCDIR): Remove gnulib files. (SUBDIR, REQUIRED_SUBDIRS): Remove gnulib. (generated_files): Remove GNULIB_H. ($(LIBGNU), all-lib): Remove targets. (distclean): Don't mention GNULIB_BUILDDIR. ($(GNULIB_BUILDDIR)/Makefile): Remove target. gdb/gdbserver/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * configure.ac: Use new path to gnulib. * configure: Rebuild. * Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path to gnulib. gnulib/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * update-gnulib.sh: Adjust paths. * Makefile.in: Adjust paths. * configure.ac: Adjust paths. Use ACX_LARGEFILE. * configure: Rebuild.
2019-05-30Revert "Sync top level files with versions from gcc."Nick Clifton1-9480/+557
This reverts commit f948b2de97884bfb4e5fc11d40a6bea9e0b096ae.
2019-05-29Sync top level files with versions from gcc.Nick Clifton1-557/+9480
top * Makefile.def (target_modules): Add libphobos. (flags_to_pass): Add GDC, GDCFLAGS, GDC_FOR_TARGET and GDCFLAGS_FOR_TARGET. (dependencies): Make libphobos depend on libatomic, libbacktrace configure, and zlib configure. (language): Add language d. * Makefile.in: Rebuild. * Makefile.tpl (BUILD_EXPORTS): Add GDC and GDCFLAGS. (HOST_EXPORTS): Add GDC. (POSTSTAGE1_HOST_EXPORTS): Add GDC and GDC_FOR_BUILD. (BASE_TARGET_EXPORTS): Add GDC. (GDC_FOR_BUILD, GDC, GDCFLAGS): New variables. (GDC_FOR_TARGET, GDC_FLAGS_FOR_TARGET): New variables. (EXTRA_HOST_FLAGS): Add GDC. (STAGE1_FLAGS_TO_PASS): Add GDC. (EXTRA_TARGET_FLAGS): Add GDC and GDCFLAGS. * config-ml.in: Treat GDC and GDCFLAGS like other compiler/flag environment variables. * configure: Rebuild. * configure.ac: Add target-libphobos to target_libraries. Set and substitute GDC_FOR_BUILD and GDC_FOR_TARGET.
2019-05-29Fix libctf build on non-ELF targets.Nick Alcock1-0/+28
All machinery works as on ELF, except for automatic loading of ELF string and symbol tables in the BFD-style open machinery. * Makefile.def (dependencies): configure-libctf depends on all-bfd and all its deps. * Makefile.in: Regenerated. libctf/ * configure.in: Check for bfd_section_from_elf_index. * configure: Regenerate. * config.h.in [HAVE_BFD_ELF]: Likewise. * libctf/ctf_open_bfd (ctf_bfdopen_ctfsect): Use it. abfd is potentially unused now.
2019-05-28libctf: build systemNick Alcock1-5/+986
This ties libctf into the build system, and makes binutils depend on it (used by the next commits). * Makefile.def (host_modules): Add libctf. * Makefile.def (dependencies): Likewise. libctf depends on zlib, libiberty, and bfd. * Makefile.in: Regenerated. * configure.ac (host_libs): Add libctf. * configure: Regenerated. libctf/ * Makefile.am: New. * Makefile.in: Regenerated. * config.h.in: Likewise. * aclocal.m4: Likewise. * configure: Likewise.
2018-06-29Introduce @unless/@endunless and postbootstrap Makefile targetsAlexandre Oliva1-129/+52
This patch turns dependencies of non-bootstrap targets on bootstrap targets for bootstrap builds into dependencies on stage_last. This arrangement gets stage1-bubble to run from stage_last if we haven't started a bootstrap yet, and to use the current stage otherwise. This was already the case of target libs, just not of non-bootstrapped host modules. In order to retain preexisting dependencies in non-bootstrap builds, or in gcc-less builds, this introduces support for @unless/@endunless pairs in Makefile.in. There is a remaining possibility of problem if activating, in a tree configured for bootstrap, a parallel build of two or more modules, at least one bootstrapped and one not. In this case, make might decide to build stage_current and stage_last in parallel, the latter will start a submake to build stage1 while the initial make, having satisfied stage_current, proceeds to build the bootstrapped module in non-bootstrapped configurations. The two builds will overlap and will likely conflict. This situation does NOT arise in normal settings, however: a post-bootstrap build of all-host all-target will indeed activate such targets concurrently, but only after building all bootstrapped modules successfully, and it will have both stage_last and stage_current targets already satisfied, so the potential race between builds will not arise. Another remaining problem, that is slightly expanded with this patch, is that of an interrupted build in a tree configured for bootstrap, continued with a non-bootstrapped target. Target modules that were not bootstrapped would already fail to complete the current stage when activated explicitly in the command line for a retry; host modules, however, would attempt to build their bootstrapped dependencies, which is what led to the problem of concurrent builds addressed with this patch. An interrupted or failed build might still recover correctly, if the non-bootstrapped target is activated in both builds, because then make will remove stage_last when its build command is interrupted, so that it will attempt to recreate it with stage1-bubble in the second try. A bootstrap build, however, will not be attempting to build stage_last, so the file will remain and the retry won't go through stage1-bubble. We have lived with that for target modules, so we can probably live with that for host modules too. Another undesirable consequence of this change is that non-boostrapped host modules, in a tree configured for bootstrap, when activated as make all-<module>, will build all of stage1 instead of only the module's usual dependencies. This is intentional and necessary to fix the parallel-build problem. If it's not desirable, disabling the unnecessary bootstrap configuration will suffice to restore the original set of dependencies. for ChangeLog * configure.ac: Introduce support for @unless/@endunless. * Makefile.tpl (dep-kind): Rewrite with cond; return postbootstrap in some cases. (make-postboot-dep, postboot-targets): New. (dependencies): Do not output postbootstrap dependencies at first. Output non-target ones changed for configure to depend on stage_last @if gcc-bootstrap, and the original deps @unless gcc-bootstrap. * configure.in, Makefile.in: Rebuilt.
2018-06-19This was already applied on the GCC side.Eric Botcazou1-1/+5
* Makefile.def (fortran): Add check-target-libgomp-fortran. * Makefile.tpl (check-target-libgomp-fortran): New phony target. * Makefile.in: Regenerate. * configure: Regenerate.
2017-01-23Sync top-level make and configure files with FSF GCC mainline versions.Nick Clifton1-1191/+378
* configure.ac: Update year in copyright notice. Sync from FSF GCC mainline, bringing in the following patches. * Makefile.def: Likewise. * Makefile.tpl: Likewise. * configure: Regenerate. * Makefile.in: Regenerate. 2016-12-21 Jakub Jelinek <jakub@redhat.com> * configure.ac: Don't bootstrap libmpx unless --with-build-config includes bootstrap-mpx. 2016-12-01 Matthias Klose <doko@ubuntu.com> * configure.ac: Don't use pkg-config to check for bdw-gc. 2016-11-30 Matthias Klose <doko@ubuntu.com> * Makefile.def: Remove reference to boehm-gc target module. * configure.ac: Include pkg.m4, check for --with-target-bdw-gc options and for the bdw-gc pkg-config module. 2016-11-15 Matthias Klose <doko@ubuntu.com> * config-ml.in: Remove references to GCJ. * configure.ac: Likewise. 2016-09-30 Jakub Jelinek <jakub@redhat.com> * configure.ac: Add target-libffi to target_libraries. Readd libgcj target disablings, modified to only target-libffi. Readd target addition of go to unsupported languages. 2016-09-30 Andrew Haley <aph@redhat.com> * Makefile.def: Remove libjava. * Makefile.tpl: Likewise. * configure.ac: Likewise. 2016-09-26 Anton Kolesov <Anton.Kolesov@synopsys.com> * configure.ac: Disable "sim" directory for arc*-*-*. 2016-09-12 Maciej W. Rozycki <macro@imgtec.com> * configure.ac: Check for the minimum in-tree MPFR version handled.
2016-05-28Add dependencies to configure ruleAlan Modra1-1/+4
* Makefile.tpl (configure): Depend on m4 files included. * Makefile.in: Regenerate.
2016-04-19Sync Makefile.tpl with gcc.Nick Clifton1-2/+3
2016-04-13 Segher Boessenkool <segher@kernel.crashing.org> PR bootstrap/70173 * Makefile.tpl (local-distclean): Delete the libcc1, gnattools, and gotools directories. Delete the stage_final file. * Makefile.in: Regenerate.
2016-02-10Sync top level files with gcc.Nick Clifton1-2/+6
Import these patches from the GCC mainline: 2016-01-12 Andris Pavenis <andris.pavenis@iki.fi> * configure.ac: Enable LTO for DJGPP * configure: Regenerate 2016-01-24 Mikhail Maltsev <maltsevm@gmail.com> PR bootstrap/69329 * Makefile.tpl (BASE_FLAGS_TO_PASS): Add LSAN_OPTIONS. * Makefile.in: Regenerate. 2016-01-25 Aditya Kumar <aditya.k7@samsung.com> Sebastian Pop <s.pop@samsung.com> * Makefile.in: Regenerate. * Makefile.tpl: Export ISLVER. * configure: Regenerate. * config/isl.m4: Detect isl-0.15. 2016-01-29 Sebastian Pop <s.pop@samsung.com> * config/isl.m4: Add comments about isl-0.16. * configure: Regenerate.
2016-01-12Sync top-level Makefile.def with GCCH.J. Lu1-27/+27
2016-01-12 Bernd Edlinger <bernd.edlinger@hotmail.de> PR bootstrap/69134 * Makefile.def (mpfr): Disable assembler. * Makefile.in: Regenerate.
2016-01-11Import changes made to files shared with the FSF GCC project.Nick Clifton1-1/+12
Import the following changes from the GCC mainline: 2015-11-13 Tsvetkova Alexandra <aleksandra.tsvetkova@intel.com> * configure.ac: Enable libmpx by default. * configure: Regenerated. 2015-11-19 Martin Liska <mliska@suse.cz> * .gitignore: Add .clang-format to ignored files. * Makefile.tpl: Add clang-format. * Makefile.in: Regenerate. 2015-12-01 Andreas Tobler <andreast@gcc.gnu.org> PR libffi/65726 * Makefile.def (lang_env_dependencies): Make libffi depend on cxx. * Makefile.in: Regenerate. 2015-12-02 Ian Lance Taylor <iant@google.com> PR go/66147 * Makefile.tpl (HOST_EXPORTS): Add XGCC_FLAGS_FOR_TARGET. * Makefile.in: Regenerate. 2015-12-17 Nathan Sidwell <nathan@acm.org> * config/isl.m4 (ISL_CHECK_VERSION): Add gmp libs. * configure: Regenerate. 2015-12-17 Sebastian Pop <s.pop@samsung.com> * Makefile.in: Replace ISL with isl. * Makefile.tpl: Same. * config/isl.m4: Same. * configure.ac: Same. * contrib/download_prerequisites: Same. * configure: Regenerate. 2016-01-01 Ben Elliston <bje@gnu.org> * config.guess: Import version 2016-01-01. * config.sub: Likewise. include 2016-01-07 Mike Frysinger <vapier@gentoo.org> * longlong.h: Change !__SHMEDIA__ to (!defined (__SHMEDIA__) || !__SHMEDIA__). Change __SHMEDIA__ to defined (__SHMEDIA__) && __SHMEDIA__.
2015-09-30Resync files in the binutils repository that are maintained in the gcc ↵Nick Clifton1-0/+1
repository. . 2015-08-23 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR libfortran/54572 * Makefile.def: Make libgfortran depend on libbacktrace. * Makefile.in: Regenerate. 2015-08-12 Tom de Vries <tom@codesourcery.com> PR other/67092 PR other/67098 * configure.ac: Remove --with_host_libstdcxx support. * configure: Regenerate. 2015-08-10 Thomas Schwinge <thomas@codesourcery.com> Jakub Jelinek <jakub@redhat.com> * configure.ac (noconfigdirs): Don't add "target-libgomp" for target nvptx*-*-*. * configure: Regenerate. include 2015-08-14 Pierre-Marie de Rodat <derodat@adacore.com> * dwarf2.def (DW_AT_GNU_bias): New attribute. 2015-08-14 Pierre-Marie de Rodat <derodat@adacore.com> * dwarf2.def (DW_AT_GNU_numerator, DW_AT_GNU_denominator): New attributes. libiberty 2015-08-15 Ian Lance Taylor <iant@google.com> * cp-demangle.c (d_abi_tags): Preserve di->last_name across any ABI tags.
2015-08-06Yaakov Selkowitz: fixes for in-tree libiconvDJ Delorie1-65/+582
* Makefile.def (libiconv): Define bootstrap=true. Mark pdf/html/info as missing. (configure-gcc): Depend on all-libiconv. (all-gcc): Ditto. (configure-libcpp): Ditto. (all-libcpp): Ditto. (configure-intl): Ditto. (all-intl): Ditto. * Makefile.in: Regenerate. binutils/ * configure: Regenerate. gdb/ * Makefile.in (LIBICONV): Define. (CLIBS): Add LIBICONV. * acinclude.m4: Use config/iconv.m4 instead of custom AM_ICONV. * configure: Regenerate.
2015-07-14Sync Makefile.tpl with GCCH.J. Lu1-2460/+2460
* Makefile.in: Regenerated. Sync with GCC 2015-05-21 Jason Merrill <jason@redhat.com> * Makefile.tpl: Update comments. 2015-04-22 Bernhard Reutner-Fischer <aldot@gcc.gnu.org> * Makefile.tpl: Remove surplus whitespace throughout. 2015-03-25 Martin Liska <mliska@suse.cz> Yury Gribov <y.gribov@samsung.com> * Makefile.tpl: Fix ln source location for vimrc file.
2015-06-24Sync libiberty from GCC, replaying updates to configure scriptsIain Buclaw1-66/+74
2015-05-01Configure zlib with --enable-host-shared for shared bfdH.J. Lu1-7/+13
When bfd is configured as a shared library, we need to configure zlib with --enable-host-shared since zlib is used by bfd. PR ld/18355 * Makefile.def: Add extra_configure_flags to host zlib. * configure.ac (extra_host_zlib_configure_flags): New. Set to --enable-host-shared When bfd is to be built as shared library. AC_SUBST. * Makefile.in: Regenerated. * configure: Likewise.
2015-03-30Make all-bfd depend on all-zlibH.J. Lu1-0/+8
* Makefile.def (dependencies): Add all-zlib to all-bfd. * Makefile.in: Regenerated.
2015-03-16Update top-level files from GCC trunkH.J. Lu1-2058/+4691
* Makefile.def: Updated from GCC trunk. * Makefile.tpl: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerated. * configure: Likewise.
2015-01-03[GCC bug #63539]: libgo does not use the newly built objcopy when doing a ↵Andrew Pinski1-0/+5
combined build 2015-01-03 Andrew Pinski <apinski@cavium.com> * Makefile.def (flags_to_pass): Pass OBJCOPY_FOR_TARGET also. * Makefile.tpl (HOST_EXPORTS): Add OBJCOPY_FOR_TARGET. (BASE_TARGET_EXPORTS): Add OBJCOPY. (OBJCOPY_FOR_TARGET): New variable. (EXTRA_TARGET_FLAGS): Add OBJCOPY. * Makefile.in: Regenerate. * configure.ac: Check for already installed target objcopy. Also GCC_TARGET_TOOL on objcopy. * configure: Regenerate.
2014-05-08PR sanitizer/56781 * Makefile.def: Set bootstrap=true; for host fixincludes. ↵jakub1-14/+533
* configure.ac: Don't bootstrap host fixincludes unless --with-build-config=bootstrap-{a,ub}san. * Makefile.in: Regenerated. * configure: Regenerated. git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@208842 138bc75d-0d04-0410-961f-82ee72b054a4
2014-05-08PR bootstrap/58572 * Makefile.tpl (POSTSTAGE1_CXX_EXPORT): Use -isystem ↵jakub1-3/+3
instead of -I for libstdc++-v3 includes if $(LEAN). * Makefile.in: Regenerated. git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@208400 138bc75d-0d04-0410-961f-82ee72b054a4
2014-04-04This fixes PR bootstrap/60620:Eric Botcazou1-0/+1
* Makefile.def (dependencies): Make gnattools depend on libstdc++-v3. * Makefile.in: Regenerate.
2014-03-27This is a fix for PR ld/16761 - the linker now has a dependence upon the ↵Yaakov Selkowitz1-0/+8
binutils because it needs to windres tool (for some targets). * Makefile.def (dependencies): Make all-ld depend on all-binutils for WINDRES_FOR_TARGET in default-manifest.o rule. * Makefile.in: Regenerate.
2013-11-08* Makefile.in: Regenerate.tschwinge1-996/+485
Follow-up to r204173. git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@204536 138bc75d-0d04-0410-961f-82ee72b054a4
2013-11-08* Makefile.tpl: Fix typo. * Makefile.in: Regenerate.tschwinge1-1/+1
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@204520 138bc75d-0d04-0410-961f-82ee72b054a4
2013-11-08/ * Makefile.tpl (STAGE1_CONFIGURE_FLAGS): Pass ↵jason1-1/+3
--disable-build-format-warnings. gcc/ * configure.ac (loose_warn): Add -Wno-format if --disable-build-format-warnings. git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@204217 138bc75d-0d04-0410-961f-82ee72b054a4
2013-11-08Added Cilk runtime library (libcilkrts) into GCC.bviyer1-1/+999
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@204173 138bc75d-0d04-0410-961f-82ee72b054a4
2013-11-08* Makefile.def (target_modules): Remove libmudflap (languages): Remove ↵law1-493/+2
check-target-libmudflap). * Makefile.in: Rebuilt. * Makefile.tpl (check-target-libmudflap-c++): Remove. * configure.ac (target_libraries): Remove target-libmudflap. Remove checks which disabled libmudflap on some systems. * configure: Rebuilt. * libmudflap: Directory removed. * Makefile.in (C_COMMON_OBJS): Remove tree-mudflap. (OBJS): Remove tree-nomudflap.o (GTFILES): Remove tree-mudflap.c * builtins.c (expand_builtin_alloc): Remove mudflap support. * gcc.c (MFWRAP_SPEC, MFLIB_SPEC): Likewise. (mfwrap_spec, mflib_spec): Likewise. (cpp_unique_options, cc1_options, static_specs): Likewise. * gimplify (gimplify_vla_decl, build_va_arg_indirect_ref): Likewise. * passes.def: Likewise. * toplev.c (compile_file, process_options): Likewise. * tree-inline.c (copy_tree_r): Likewise. * tree-pass.,h (make_pass_mudflap_1, make_pass_mudflap_2): Likewise. * varasm.c (make_decl_rtl, make_decl_rtl_for_debug): Likewise. (build_constant_desc, output_constant_def_contents): Likewise. (categorize_decl_for_section): Likewise. * tree-mudflap.c: Removed. * tree-mudflap.h: Removed. * tree-nomudflap.c: Removed. * bfin/uclinux.h (MFWRAP_SPEC): Remove. * moxie/uclinux.h (MFWRAP_SPEC): Likewise. * rs6000/aix.h (MFWRAP_SPEC, MFLIB_SPEC): Likewise. * config/sol2.h (MFLIB_SPEC): Likewise. * doc/install.texi: Remove mudflap references. * doc/passes.texi: Similarly. * doc/sourcebuild.texi: Similarly. * doc/invoke.texi: Remove mudlfap related options. * c-family/c-common.c (c_define_builtins): Remove mudflap support. * c-family/c.opt: Ignore and warn for mudflap options. * g++.dg/torture/pr49309.C: Removed. * gcc.dg/dfp/pr35739.c: Removed. git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@204090 138bc75d-0d04-0410-961f-82ee72b054a4
2013-08-122013-08-12 Jan-Benedict Glaw <jbglaw@lug-owl.de>Jan-Benedict Glaw1-1/+1025
* configure.ac: Sync with GCC repo. * Makefile.def: Ditto. * configure: Regenerate. * Makefile.in: Ditto.
2013-04-222013-04-22 Jan-Benedict Glaw <jbglaw@lug-owl.de>Jan-Benedict Glaw1-14/+4
* Makefile.def: Sync with GCC. * Makefile.in: Regenerate.