aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-11-11Add assembler, disassembler and linker support for power9.Peter Bergner39-164/+2273
include/opcode/ * ppc.h (PPC_OPCODE_POWER9): New define. (PPC_OPCODE_VSX3): Likewise. opcodes/ * ppc-dis.c (ppc_opts): Add "power9" and "pwr9" entries. Add PPC_OPCODE_VSX3 to the vsx entry. (powerpc_init_dialect): Set default dialect to power9. * ppc-opc.c (insert_dcmxs, extract_dcmxs, insert_dxd, extract_dxd, insert_dxdn, extract_dxdn, insert_l0, extract_l0, insert_l1, extract_l1 insert_xtq6, extract_xtq6): New static functions. (insert_esync): Test for illegal L operand value. (DCMX, DCMXS, DXD, NDXD, L0, L1, RC, FC, UIM6, X_R, RIC, PRS, XSQ6, XTQ6, LRAND, IMM8, DQX, DQX_MASK, DX, DX_MASK, VXVAPS_MASK, VXVA,XVA, XX2VA, XVARC, XBF_MASK, XX2UIM4_MASK, XX2BFD_MASK, XX2DCMXS_MASK, XVA_MASK, XRLA_MASK, XBFRARB_MASK, XLRAND_MASK, POWER9, PPCVEC3, PPCVSX3): New defines. (powerpc_opcodes) <ps_cmpu0, ps_cmpo0, ps_cmpu1, ps_cmpo1, fcmpu, fcmpo, ftdiv, ftsqrt>: Use XBF_MASK. <mcrxr>: Use XBFRARB_MASK. <addpcis, bcdcfn., bcdcfsq., bcdcfz., bcdcpsgn., bcdctn., bcdctsq., bcdctz., bcds., bcdsetsgn., bcdsr., bcdtrunc., bcdus., bcdutrunc., cmpeqb, cmprb, cnttzd, cnttzd., cnttzw, cnttzw., copy, copy_first, cp_abort, darn, dtstsfi, dtstsfiq, extswsli, extswsli., ldat, ldmx, lwat, lxsd, lxsibzx, lxsihzx, lxssp, lxv, lxvb16x, lxvh8x, lxvl, lxvll, lxvwsx, lxvx, maddhd, maddhdu, maddld, mcrxrx, mfvsrld, modsd, modsw, modud, moduw, msgsync, mtvsrdd, mtvsrws, paste, paste., paste_last, rmieg, setb, slbieg, slbsync, stdat, stop, stwat, stxsd, stxsibx, stxsihx, stxssp, stxv, stxvb16x, stxvh8x, stxvl, stxvll, stxvx, subpcis, urfid, vbpermd, vclzlsbb, vcmpneb, vcmpneb., vcmpneh, vcmpneh., vcmpnew, vcmpnew., vcmpnezb, vcmpnezb., vcmpnezh, vcmpnezh., vcmpnezw, vcmpnezw., vctzb, vctzd, vctzh, vctzlsbb, vctzw, vextractd, vextractub, vextractuh, vextractuw, vextsb2d, vextsb2w, vextsh2d, vextsh2w, vextsw2d, vextublx, vextubrx, vextuhlx, vextuhrx, vextuwlx, vextuwrx, vinsertb, vinsertd, vinserth, vinsertw, vmul10cuq, vmul10ecuq, vmul10euq, vmul10uq, vnegd, vnegw, vpermr, vprtybd, vprtybq, vprtybw, vrldmi, vrldnm, vrlwmi, vrlwnm, vslv, vsrv, wait, xsabsqp, xsaddqp, xsaddqpo, xscmpeqdp, xscmpexpdp, xscmpexpqp, xscmpgedp, xscmpgtdp, xscmpnedp, xscmpoqp, xscmpuqp, xscpsgnqp, xscvdphp, xscvdpqp, xscvhpdp, xscvqpdp, xscvqpdpo, xscvqpsdz, xscvqpswz, xscvqpudz, xscvqpuwz, xscvsdqp, xscvudqp, xsdivqp, xsdivqpo, xsiexpdp, xsiexpqp, xsmaddqp, xsmaddqpo, xsmaxcdp, xsmaxjdp, xsmincdp, xsminjdp, xsmsubqp, xsmsubqpo, xsmulqp, xsmulqpo, xsnabsqp, xsnegqp, xsnmaddqp, xsnmaddqpo, xsnmsubqp, xsnmsubqpo, xsrqpi, xsrqpix, xsrqpxp, xssqrtqp, xssqrtqpo, xssubqp, xssubqpo, xststdcdp, xststdcqp, xststdcsp, xsxexpdp, xsxexpqp, xsxsigdp, xsxsigqp, xvcmpnedp, xvcmpnedp., xvcmpnesp, xvcmpnesp., xvcvhpsp, xvcvsphp, xviexpdp, xviexpsp, xvtstdcdp, xvtstdcsp, xvxexpdp, xvxexpsp, xvxsigdp, xvxsigsp, xxbrd, xxbrh, xxbrq, xxbrw, xxextractuw, xxinsertw, xxperm, xxpermr, xxspltib>: New instructions. <doze, nap, sleep, rvwinkle, waitasec, lxvx, stxvx>: Disable on POWER9. <tlbiel, tlbie, sync, slbmfev, slbmfee>: Add additional operands. include/elf/ * ppc.h (R_PPC_REL16DX_HA): New reloction. * ppc64.h (R_PPC64_REL16DX_HA): Likewise. bfd/ * elf32-ppc.c (ppc_elf_howto_raw): Add R_PPC_REL16DX_HA. (ppc_elf_reloc_type_lookup): Handle R_PPC_REL16DX_HA. (ppc_elf_addr16_ha_reloc): Likewise. (ppc_elf_check_relocs): Likewise. (ppc_elf_relocate_section): Likewise. (is_insn_dq_form): Handle lxv and stxv instructions. * elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_REL16DX_HA. (ppc64_elf_reloc_type_lookup): Handle R_PPC64_REL16DX_HA. (ppc64_elf_ha_reloc): Likewise. (ppc64_elf_check_relocs): Likewise. (ppc64_elf_relocate_section): Likewise. * bfd-in2.h: Regenerate. * libbfd.h: Likewise. * reloc.c (BFD_RELOC_PPC_REL16DX_HA): New. elfcpp/ * powerpc.h (R_POWERPC_REL16DX_HA): Define. gas/ * doc/as.texinfo (Target PowerPC): Document -mpower9 and -mpwr9. * doc/c-ppc.texi (PowerPC-Opts): Likewise. * config/tc-ppc.c (md_show_usage): Likewise. (md_assemble): Handle BFD_RELOC_PPC_REL16DX_HA. (md_apply_fix): Likewise. (ppc_handle_align): Handle power9's group ending nop. gas/testsuite/ * gas/ppc/altivec3.s: New test. * gas/ppc/altivec3.d: Likewise. * gas/ppc/vsx3.s: Likewise. * gas/ppc/vsx3.d: Likewise. * gas/ppc/power9.s: Likewise. * gas/ppc/power9.d: Likewise. * gas/ppc/ppc.exp: Run them. * gas/ppc/power8.s <lxvx, lxvd2x, stxvx, stxvd2x>: Add new tests. * gas/ppc/power8.d: Likewise. * gas/ppc/vsx.s: <lxvx, stxvx>: Rename invalid mnemonics ... <lxvd2x, stxvd2x>: ...to this. * gas/ppc/vsx.d: Likewise. gold/ * gold/powerpc.cc (Powerpc_relocate_functions::addr16_dq): New function. (Powerpc_relocate_functions::addr16dx_ha): Likewise. (Target_powerpc::Scan::local): Handle R_POWERPC_REL16DX_HA. (Target_powerpc::Scan::global): Likewise. (Target_powerpc::Relocate::relocate): Likewise. ld/testsuite/ * ld-powerpc/addpcis.d: New test. * ld-powerpc/addpcis.s: New test. * ld-powerpc/powerpc.exp: Run it.
2015-11-12Automatic date update in version.inGDB Administrator1-1/+1
2015-11-11gdb/testsuite/gdb.trace: Deduplicate set_point assembly.Marcin Kościelnicki10-181/+104
The assembly code for emitting the proper tracepointable instruction was duplicated in many places. Keep it in one place, to reduce work needed for new targets. gdb/testsuite/ChangeLog: * gdb.trace/change-loc.h: include "trace-common.h", remove SYMBOL macro. (func5): Removed. (func4): Use FAST_TRACEPOINT_LABEL. * gdb.trace/ftrace-lock.c: include "trace-common.h", remove SYMBOL macro. (func): Removed. (thread_function): Use FAST_TRACEPOINT_LABEL. * gdb.trace/ftrace.c: include "trace-common.h", remove SYMBOL macro. (func): Remove. (marker): Use FAST_TRACEPOINT_LABEL. * gdb.trace/pendshr1.c: include "trace-common.h", remove SYMBOL macro. (pendfunc1): Remove. (pendfunc): Use FAST_TRACEPOINT_LABEL. * gdb.trace/pendshr2.c: include "trace-common.h", remove SYMBOL macro. (foo): Remove. (pendfunc2): Use FAST_TRACEPOINT_LABEL. * gdb.trace/trace-break.c: include "trace-common.h", remove SYMBOL macro. (func): Remove. (marker): Use FAST_TRACEPOINT_LABEL. * gdb.trace/trace-common.h: New header. * gdb.trace/trace-condition.c: include "trace-common.h", remove SYMBOL macro. (func): Remove. (marker): Use FAST_TRACEPOINT_LABEL. * gdb.trace/trace-mt.c: include "trace-common.h", remove SYMBOL macro. (func): Remove. (thread_function): Use FAST_TRACEPOINT_LABEL.
2015-11-11Replace long int * cast with PTRACE_TYPE_RET *Simon Marchi2-2/+8
These casts uses the typedef target type (long int *) instead of the typedef name. This was a little mistake in one of the big C++ cast patches. gdb/ChangeLog: * inf-ptrace.c (inf_ptrace_fetch_register): Change long int * cast to PTRACE_TYPE_RET *. (inf_ptrace_store_register): Likewise.
2015-11-11gdb: Make use of 'add_info' to create info sub-commands.Andrew Burgess4-27/+25
Switch to using 'add_info' function for creating basic info sub-commands. gdb/ChangeLog: * avr-tdep.c (_initialize_avr_tdep): Switch to 'add_info' for creating info sub-commands. * gnu-nat.c (add_task_commands): Likewise. * macrocmd.c (_initialize_macrocmd): Likewise.
2015-11-11gdb: Use class_info when creating info commands.Andrew Burgess2-1/+5
The 'add_info' function is used for creating info commands, these commands should be created as 'class_info' rather than 'no_class'. gdb/ChangeLog: * cli/cli-decode.c (add_info): Switch to class_info.
2015-11-11Automatic date update in version.inGDB Administrator1-1/+1
2015-11-10gdb/testsuite/gdb.trace: Deduplicate pcreg/spreg/fpreg.Marcin Kościelnicki13-145/+47
These variables were used in many gdb.trace tests. Keep them in one place, to reduce work needed for new targets. gdb/testsuite/ChangeLog: * gdb.trace/backtrace.exp: Use global fpreg/spreg definition, add $ in front. * gdb.trace/change-loc.exp: Use global pcreg definition. * gdb.trace/collection.exp: Use global pcreg/fpreg/spreg definition. * gdb.trace/entry-values.exp: Use global spreg definition, add $ in front. * gdb.trace/mi-trace-frame-collected.exp: Use global pcreg definition. * gdb.trace/pending.exp: Likewise. * gdb.trace/report.exp: Use global pcreg/fpreg/spreg definition. * gdb.trace/trace-break.exp: Likewise. * gdb.trace/trace-condition.exp: Use global pcreg definition, add $ in front. * gdb.trace/unavailable.exp: Use global pcreg/fpreg/spreg definition. * gdb.trace/while-dyn.exp: Use global fpreg definition, add $ in front. * lib/trace-support.exp: Define fpreg, spreg, pcreg variables.
2015-11-10Add Qualcomm qdf24xx support.Jim Wilson5-0/+15
gas/ * config/tc-aarch64.c (aarch64_cpus): Add qdf24xx. * config/tc-arm.c (arm_cpus): Likewise. * doc/c-arm.texi, doc/c-aarch64.texi: Likewise.
2015-11-10Update the RX simulator to handle the latest opcode types.Nick Clifton2-1/+24
* rx.c (id_names): Add nop4, nop5, nop6 and nop7. (decode_opcode): Likewise. (get_op): Handle RX_Operand_Zero_Indirect. Handle RX_Bad_Size and RX_MAX_SIZE. (put_op): Likewise. (N_MAP): Increase to 90.
2015-11-10Handle x86 VTINHERIT/VTENTRY relocs when deleting relocationsH.J. Lu3-2/+16
* elf32-i386.c (elf_i386_relocate_section): Handle VTINHERIT and VTENTRY relocations when deleting relocations. * elf64-x86-64.c (elf_x86_64_relocate_section): Likewise.
2015-11-10Properly move kept relocations when deleting relocationsH.J. Lu3-2/+16
* elf32-i386.c (elf_i386_relocate_section): Properly move kept relocations when deleting relocations. * elf64-x86-64.c (elf_x86_64_relocate_section): Likewise.
2015-11-10Fix performance regression on x86 with ld -rH.J. Lu3-8/+98
Similar fix to "commit c316a17c40e44e8798b34ff84130904f2e7a53de". * elf32-i386.c (elf_i386_relocate_section): Use read and write pointers to reloc array, rather than memmove when deleting a reloc. Don't use RELOC_AGAINST_DISCARDED_SECTION. Adjust reloc counts at end of loop. * elf64-x86-64.c (elf_x86_64_relocate_section): Likewise.
2015-11-10sim: cr16/d10v: localize translation funcsMike Frysinger7-52/+27
These functions are only used in the interp module, so there's no point in exporting them and declaring them in the external sim interface.
2015-11-10Fix performance regression due to ld -r memmoveAlan Modra3-69/+157
The idea here is that instead of using memmove to shuffle the relocs array every time one is deleted, to add a "wrel" pointer and copy from rel[0] to wrel[0] as we go. * elf64-ppc.c (ppc64_elf_relocate_section): Use read and write pointers to reloc array, rather than memmove when deleting a reloc. Don't use RELOC_AGAINST_DISCARDED_SECTION. Adjust reloc counts at end of loop. * elf32-ppc.c (ppc_elf_relocate_section): Likewise.
2015-11-10sim: m32c: move test code to testsuiteMike Frysinger8-26/+17
Various target code belongs in the testsuite/ subdir, so move the m32c code to match all the other targets.
2015-11-10sim: m32c: drop redundant dependency infoMike Frysinger2-13/+4
2015-11-10sim: h8300: drop unused littleendian variableMike Frysinger2-13/+5
2015-11-10Automatic date update in version.inGDB Administrator1-1/+1
2015-11-09Recognize .pdr debug sections.Vladimir Radosavljevic2-1/+7
gold/ * layout.h (Layout::is_debug_info_section): Recognize .pdr debug sections.
2015-11-09Remove unnecessary target dependencies on relocation format.Cary Coutant12-23/+78
2015-11-09 Cary Coutant <ccoutant@gmail.com> Vladimir Radosavljevic <Vladimir.Radosavljevic@imgtec.com> gold/ * copy-relocs.h (Copy_relocs::copy_reloc): Replace reloc parameter with type, offset, addend. (Copy_relocs::save): Likewise. * copy-relocs.cc (Copy_relocs::copy_reloc): Likewise. (Copy_relocs::save): Likewise. * aarch64.cc (Target_aarch64::copy_reloc): Pass r_type, r_offset, and r_addend to Copy_relocs::copy_reloc. * arm.cc (Target_arm::copy_reloc): Likewise. * i386.cc (Target_i386::copy_reloc): Likewise. * mips.cc (Target_mips::copy_reloc): Likewise. * powerpc.cc (Target_powerpc::copy_reloc): Likewise. * s390.cc (Target_s390::copy_reloc): Likewise. * sparc.cc (Target_sparc::copy_reloc): Likewise. * tilegx.cc (Target_tilegx::copy_reloc): Likewise. * x86_64.cc (Target_x86_64::copy_reloc): Likewise.
2015-11-09[Ada] GDB crash during "finish" of function with out parametersJoel Brobecker7-0/+129
Consider a function with the following signature... function F (R : out Rec_Type) return Enum_Type; ... where Rec_Type is a simple record: type Rec_Type is record Cur : Integer; end record; Trying to "finish" from that function causes GDB to SEGV: (gdb) fin Run till exit from #0 bar.f (r=...) at bar.adb:5 0x00000000004022fe in foo () at foo.adb:5 5 I : Enum_Type := F (R); [1] 18949 segmentation fault (core dumped) /[..]/gdb This is related to the fact that funtion F has a parameter (R) which is an "out" parameter being passed by copy. For those, GNAT transforms the return value to be a record with multiple fields: The first one is called "RETVAL" and contains the return value shown in the source, and the remaining fields have the same name as the "out" or "in out" parameters which are passed by copy. So, in the example above, function F returns a struct that has one field who name is "r". Because "RETVAL" starts with "R", GDB thinks it's a wrapper field, because it looks like the encoding used for variant records: -- member_name ::= {choice} | others_choice -- choice ::= simple_choice | range_choice -- simple_choice ::= S number -- range_choice ::= R number T number <<<<<----- here -- number ::= {decimal_digit} [m] -- others_choice ::= O (upper case letter O) See ada_is_wrapper_field: return (name != NULL && (startswith (name, "PARENT") || strcmp (name, "REP") == 0 || startswith (name, "_parent") || name[0] == 'S' || name[0] == 'R' || name[0] == 'O')); As a result of this, when trying to print the RETURN value, we think that RETVAL is a wrapper, and thus recurse into print_field_values... if (ada_is_wrapper_field (type, i)) { comma_needed = print_field_values (TYPE_FIELD_TYPE (type, i), valaddr, (offset + TYPE_FIELD_BITPOS (type, i) / HOST_CHAR_BIT), stream, recurse, val, options, comma_needed, type, offset, language); ... which is a problem since print_field_values assumes that the type it is given ("TYPE_FIELD_TYPE (type, i)" here), is also a record type. However, that's not the case, since RETVAL is an enum. That eventually leads GDB to a NULL type when trying to extract fields out of the enum, which then leads to a SEGV when trying to dereference it. Ideally, we'd want to be a little more careful in identifying wrapper fields, by enhancing ada_is_wrapper_field to be a little more complete in its analysis of the field name before declaring it a variant record wrapper. However, it's not super easy to do so, considering that the choices can be combined together when complex choices are used. Eg: -- [...] the choice 1 .. 4 | 7 | -10 would be represented by -- R1T4S7S10m Given that we are working towards getting rid of GNAT encodings, which means that the above will eventually disappear, we took the more pragmatic approach is just treating RETVAL as a special case. gdb/ChangeLog: * ada-lang.c (ada_is_wrapper_field): Add special handling for fields called "RETVAL". gdb/testsuite/ChangeLog: * gdb.ada/fin_fun_out: New testcase.
2015-11-09gas: Fix left shift of negative value.Dominik Vogt48-65/+118
This patch fixes all occurences of left-shifting negative constants in C cod which is undefined by the C standard. gas/ChangeLog: * read.c (parse_bitfield_cons): Fix left shift of negative value. * config/tc-xstormy16.c (md_section_align): Likewise. * config/tc-xgate.c (md_section_align): Likewise. * config/tc-visium.c (md_section_align): Likewise. * config/tc-v850.c (md_section_align): Likewise. * config/tc-tic6x.c (md_section_align): Likewise. * config/tc-sh.c (SH64PCREL32_M, SH64PCREL48_M, SH64PCREL32_M) (MOVI_32_M, MOVI_48_M, MOVI_32_M, md_section_align): Likewise. * config/tc-sh64.c (shmedia_md_estimate_size_before_relax): Likewise. * config/tc-score.c (s3_section_align): Likewise. * config/tc-score7.c (s7_section_align): Likewise. * config/tc-s390.c (md_section_align): Likewise. * config/tc-rx.c (md_section_align): Likewise. * config/tc-rl78.c (md_section_align): Likewise. * config/tc-ppc.c (md_section_align): Likewise. * config/tc-or1k.c (md_section_align): Likewise. * config/tc-nds32.c (md_section_align): Likewise. * config/tc-mt.c (md_section_align): Likewise. * config/tc-msp430.c (md_section_align): Likewise. * config/tc-mn10300.c (md_section_align): Likewise. * config/tc-mn10200.c (md_section_align): Likewise. * config/tc-mips.c (md_section_align): Likewise. * config/tc-microblaze.c (parse_imm): Likewise. * config/tc-mep.c (md_section_align): Likewise. * config/tc-m68k.c (md_section_align): Likewise. * config/tc-m68hc11.c (md_section_align): Likewise. * config/tc-m32r.c (md_section_align): Likewise. * config/tc-m32c.c (md_section_align): Likewise. * config/tc-lm32.c (md_section_align): Likewise. * config/tc-iq2000.c (md_section_align): Likewise. * config/tc-ip2k.c (md_section_align): Likewise. * config/tc-ia64.c (dot_save, dot_vframe): Likewise. * config/tc-i960.c (md_number_to_field, md_section_align): Likewise. * config/tc-i386.c (md_section_align): Likewise. * config/tc-i370.c (md_section_align): Likewise. * config/tc-frv.c (md_section_align): Likewise. * config/tc-fr30.c (md_section_align): Likewise. * config/tc-epiphany.c (md_section_align): Likewise. * config/tc-d30v.c (md_section_align): Likewise. * config/tc-d10v.c (md_section_align): Likewise. * config/tc-cr16.c (l_cons): Likewise. * config/tc-bfin.c (md_section_align): Likewise. * config/tc-arm.c (md_section_align): Likewise. * config/tc-arc.c (md_section_align): Likewise. * config/bfin-parse.y (expr_1): Likewise. gas/testsuite/ChangeLog: * gas/all/test-gen.c (random_order_16s, random_order_24s) (random_order_32s): Fix left shift of negative value.
2015-11-09binutils: Fix left shift of negative value.Dominik Vogt2-1/+5
This patch fixes all occurences of left-shifting negative constants in C code which is undefined by the C standard. binutils/ChangeLog: * dwarf.c (read_leb128): Fix left shift of negative value.
2015-11-09bfd: Fix left shift of negative value.Dominik Vogt6-7/+16
This patch fixes all occurences of left-shifting negative constants in C code which is undefined by the C standard. bfd/ChangeLog: * elf64-ppc.c (ppc64_elf_size_stubs, ppc64_elf_build_stubs): Fix left shift of negative value. * libbfd.c (safe_read_leb128): Likewise. * dwarf2.c (place_sections): Likewise. * bfd-in.h (align_power): Likewise. * bfd-in2.h (align_power): Likewise.
2015-11-09Use ELF_STRING_ARM_unwind in arm-tdep.cYao Qi2-1/+6
We've already has the definition like this, #define ELF_STRING_ARM_unwind ".ARM.exidx" so it is better to use the macro rather than the string. gdb: 2015-11-09 Yao Qi <yao.qi@linaro.org> * arm-tdep.c (arm_exidx_new_objfile): Use ELF_STRING_ARM_unwind.
2015-11-09New function displaced_step_in_progress_threadYao Qi2-3/+24
This patch adds a new function displaced_step_in_progress_thread, which returns whether the thread is in progress of displaced stepping. gdb: 2015-11-09 Yao Qi <yao.qi@linaro.org> * infrun.c (displaced_step_in_progress_thread): New function. (handle_inferior_event_1): Call it.
2015-11-09Move copy_u.w to MSA64 ASE, remove copy_u.d.Robert Suchanek8-46/+37
opcodes/ChangeLog: * mips-opc.c (mips_builtin_opcodes): Change "copy_u.w" to MSA64 ASE, remove "copy_u.d". gas/testsuite/ChangeLog: * gas/mips/micromips@msa.d: Remove "copy_u.w". * gas/mips/msa.d: Likewise. * gas/mips/msa.s: Likweise. * gas/mips/mipsr6@msa.d: Likewise. Replace addresses with regex. * gas/mips/msa64.d: Add "copy_u.w". Remove "copy_u.d". * gas/mips/msa64.s: Likewise. * gas/mips/micromips@msa64.d: Likewise.
2015-11-09Configury changes for obstack optimizationAlan Modra4-0/+44
Provides defines used to determine whether glibc obstacks are compatible. Generally speaking, 32-bit targets won't need to use obstack.o from libiberty if glibc is used, while 64-bit targets will, until glibc gets the new obstack code. libiberty/ * configure.ac: Get size of size_t. * config.in: Regenerate. * configure: Regenerate.
2015-11-09Silence obstack.c -Wc++compat warningAlan Modra2-2/+9
Fixes warning: request for implicit conversion from ‘void *’ to ‘struct _obstack_chunk *’ not permitted in C++ [-Wc++-compat] I moved the assignment to h->chunk to fix an overlong line, then decided it would be better after the alloc failure check just to do things the same way as in _obstack_newchunk. * obstack.c (_obstack_newchunk): Silence -Wc++compat warning. (_obstack_begin_worker): Likewise. Move assignment to h->chunk after alloc failure check.
2015-11-09Modify obstack.[hc] to avoid having to include other gnulib filesAlan Modra5-14/+55
Using the standard gnulib obstack source requires importing quite a lot of other files from gnulib, and requires build changes. include/ PR gdb/17133 * obstack.h (__attribute_pure__): Expand _GL_ATTRIBUTE_PURE. libiberty/ PR gdb/17133 * obstack.c (__alignof__): Expand alignof_type from alignof.h. (obstack_exit_failure): Don't use exitfail.h. (_): Include libintl.h when HAVE_LIBINTL_H and nls enabled. Provide default. Don't include gettext.h. (_Noreturn): Define. * obstacks.texi: Adjust node references to external libc info files.
2015-11-09Copy gnulib obstack filesAlan Modra5-939/+794
This copies obstack.[ch] from gnulib, and updates the docs. The next patch should be applied if someone repeats the import at a later date. include/ PR gdb/17133 * obstack.h: Import current gnulib file. libiberty/ PR gdb/17133 * obstack.c: Import current gnulib file. * obstacks.texi: Updated doc, from glibc's manual/memory.texi.
2015-11-09Automatic date update in version.inGDB Administrator1-1/+1
2015-11-08Automatic date update in version.inGDB Administrator1-1/+1
2015-11-07gdb.dwarf2: Don't hardcode certain constants in Dwarf::assemble constructsKevin Buettner3-6/+16
Two tests in gdb.dwarf2, data-loc.exp and dynarr-ptr.exp assume that sizeof(int) is 4. This patch looks up the integer size and uses this constant for DW_AT_byte_size, DW_AT_lower_bound, and DW_AT_upper_bound. I discovered this problem while looking at test results for this msp430 multilib: msp430-sim/-msim/-mcpu=msp430x/-mlarge/-mdata-region=either/-mcode-region=either It fixes the following set of failures: FAIL: gdb.dwarf2/dynarr-ptr.exp: print foo.three_ptr.all'first FAIL: gdb.dwarf2/dynarr-ptr.exp: print foo.three_ptr'first FAIL: gdb.dwarf2/dynarr-ptr.exp: print foo.three_ptr_tdef.all'first FAIL: gdb.dwarf2/dynarr-ptr.exp: print foo.three_ptr_tdef'first FAIL: gdb.dwarf2/dynarr-ptr.exp: print foo.five_ptr.all'first FAIL: gdb.dwarf2/dynarr-ptr.exp: print foo.five_ptr'first FAIL: gdb.dwarf2/dynarr-ptr.exp: print foo.five_ptr_tdef.all'first FAIL: gdb.dwarf2/dynarr-ptr.exp: print foo.five_ptr_tdef'first FAIL: gdb.dwarf2/data-loc.exp: print foo.three FAIL: gdb.dwarf2/data-loc.exp: print foo.three(1) FAIL: gdb.dwarf2/data-loc.exp: print foo.three(2) FAIL: gdb.dwarf2/data-loc.exp: print foo.three(3) FAIL: gdb.dwarf2/data-loc.exp: print foo.three_tdef FAIL: gdb.dwarf2/data-loc.exp: print foo.three_tdef(1) FAIL: gdb.dwarf2/data-loc.exp: print foo.three_tdef(2) FAIL: gdb.dwarf2/data-loc.exp: print foo.three_tdef(3) FAIL: gdb.dwarf2/data-loc.exp: print foo.five FAIL: gdb.dwarf2/data-loc.exp: print foo.five(2) FAIL: gdb.dwarf2/data-loc.exp: print foo.five(3) FAIL: gdb.dwarf2/data-loc.exp: print foo.five(4) FAIL: gdb.dwarf2/data-loc.exp: print foo.five(5) FAIL: gdb.dwarf2/data-loc.exp: print foo.five(6) FAIL: gdb.dwarf2/data-loc.exp: print foo.five_tdef FAIL: gdb.dwarf2/data-loc.exp: print foo.five_tdef(2) FAIL: gdb.dwarf2/data-loc.exp: print foo.five_tdef(3) FAIL: gdb.dwarf2/data-loc.exp: print foo.five_tdef(4) FAIL: gdb.dwarf2/data-loc.exp: print foo.five_tdef(5) FAIL: gdb.dwarf2/data-loc.exp: print foo.five_tdef(6) FAIL: gdb.dwarf2/data-loc.exp: print foo__three FAIL: gdb.dwarf2/data-loc.exp: print foo__three_tdef FAIL: gdb.dwarf2/data-loc.exp: print foo__five FAIL: gdb.dwarf2/data-loc.exp: print foo__five_tdef As I recall, there are still (other) problems with msp430 multilibs which don't use -mlarge. gdb/testsuite/ChangeLog: * gdb.dwarf2/data-loc.exp (Dwarf::assemble): Don't hardcode value associated with DW_AT_byte_size. * gdb.dwarf2/dynarr-ptr.exp (Dwarf::assemble): Don't hardcode constants for DW_AT_byte_size, DW_AT_lower_bound, and DW_AT_upper_bound.
2015-11-07testsuite: Define and use gdb_target_symbol_prefix_flags_asm.Kevin Buettner18-49/+194
Some of the source code for the test cases in the GDB testsuite reside in .S files containing assembly code. These files typically define a symbol - such as main - which may, depending on the target, require a prefix such as underscore. For example, gdb.dwarf2/dw-compdir-oldgcc.S defines the symbol main: main: .globl main Some targets, such as rx-elf, require main to have an underscore prefix. (If it doesn't, a linker error results due to not being able to find _main required by crt0.o.) So, instead, the above should look like this for rx-elf and other targets with this same requirement: _main: .globl _main This patch defines a new tcl proc in lib/gdb named gdb_target_symbol_prefix_flags_asm. This proc returns a string which will - assuming everything else is wired up correctly - cause -DSYMBOL_PREFIX=_ to be passed on the command line to the compiler. The test cases are augmented with a macro definition for SYMBOL as follows: #define CONCAT1(a, b) CONCAT2(a, b) #define CONCAT2(a, b) a ## b #ifdef SYMBOL_PREFIX # define SYMBOL(str) CONCAT1(SYMBOL_PREFIX, str) #else # define SYMBOL(str) str #endif Symbols, such as main shown in the example earlier are then wrapped with SYMBOL like this: SYMBOL(main): .globl SYMBOL(main) The net effect will be to add a prefix for those targets which need it and add no prefix for those targets which do not. It should be noted that there was already a proc in lib/gdb.exp called gdb_target_symbol_prefix_flags. It still exists, but has been significantly rewritten. (There is only one small difference between the two versions.) That proc used to explicitly list targets which were known to require an underscore prefix. This is no longer done; the recently added proc, gdb_target_symbol_prefix, is now invoked to dynamically discover whether or not a prefix is required for that particular target. The difference between gdb_target_symbol_prefix_flags_asm and gdb_target_symbol_prefix_flags is that the former returns a bare prefix while the latter returns the prefix enclosed in double quotes. I.e. assuming that the discovered prefix is underscore, gdb_target_symbol_prefix_flags_asm returns: additional_flags=-DSYMBOL_PREFIX=_ while gdb_target_symbol_prefix_flags returns: additional_flags=-DSYMBOL_PREFIX="_" The double-quoted version is not suitable for using with .S files containing assembly code; there is no way to strip the double quotes using C preprocessor constructs. It would be possible to use the bare (non double quoted) version in C source code. However, the supporting macros become more complicated and therefore more difficult to maintain. gdb/testsuite/ChangeLog: * lib/gdb (gdb_target_symbol_prefix_flags_asm): New proc. (gdb_target_symbol_prefix_flags): Define in terms of _asm version. * gdb.arch/i386-float.exp, gdb.arch/i386-permbkpt.exp, gdb.dwarf2/dw2-canonicalize-type.exp, gdb.dwarf2/dw2-compdir-oldgcc.exp, gdb.dwarf2/dw2-minsym-in-cu.exp, gdb.dwarf2/dw2-op-stack-value.exp, gdb.dwarf2/dw2-unresolved.exp, gdb.dwarf2/fission-reread.exp, gdb.dwarf2/pr13961.exp: Use flags provided by gdb_target_symbol_prefix_flags_asm. * gdb.dwarf2/dw2-canonicalize-type.S, gdb.dwarf2/dw2-compdir-oldgcc.S, testsuite/gdb.dwarf2/dw2-minsym-in-cu.S, testsuite/gdb.dwarf2/dw2-unresolved-main.c, testsuite/gdb.dwarf2/dw2-unresolved.S, gdb.dwarf2/fission-reread.S, gdb.dwarf2/pr13961.S: Define and use SYMBOL macro (and supporting macros where needed). Use this macro for symbols which require the prefix provided by SYMBOL_PREFIX.
2015-11-07Automatic date update in version.inGDB Administrator1-1/+1
2015-11-06Do not use libiberty's getpagesize on AndroidJoel Brobecker3-0/+18
Building libiberty on Android currently fails with the error message shown below. This was discovered by trying to build GDBserver for Android, which stopped building after libiberty became a GDBserver dependency. Here is the error message: [...]/getpagesize.c:64:1: error: redefinition of 'getpagesize' In file included from /[...]/getpagesize.c:34:0: /[...]/usr/include/unistd.h:171:23: note: previous definition of 'getpagesize' was here And looking at the definition, one can see that it defined as a static inline function... static __inline__ int getpagesize(void) { extern unsigned int __page_size; return __page_size; } ... which explains why the AC_CHECK_FUNCS test failed to detect the function, since there is no associated symbol to be linked in. This patch prevents getpagesize.c to be compiled in by hard-coding the fact that getpagesize is available on android hosts. libiberty/ChangeLog: * configure.ac: Set AC_CV_FUNC_GETPAGESIZE to "yes" on Android hosts. * configure: Regenerate.
2015-11-06Automatic date update in version.inGDB Administrator1-1/+1
2015-11-05gdb.dwarf2: Define and use gdb_target_symbol for symbol prefixesKevin Buettner9-18/+96
Some of the tests in gdb.dwarf2 which use Dwarf::assemble refer to (minimal/linker) symbols created in the course of building a small test program. Some targets use a prefix such as underscore ("_") on these symbols. Many of the tests in gdb.dwarf2 do not take this into account. As a consequence, these tests fail to build, resulting either in failures or untested testcases. Here is an example from gdb.dwarf2/dw2-regno-invalid.exp: Dwarf::assemble $asm_file { cu {} { compile_unit { {low_pc main DW_FORM_addr} {high_pc main+0x10000 DW_FORM_addr} } { ... } For targets which require an underscore prefix on linker symbols, the two occurrences of "main" would have to have a prepended underscore, i.e. _main instead of main. For the above case, a call to the new proc gdb_target_symbol is used prepend the correct prefix to the symbol. I.e. the above code is rewritten (as shown in the patch) as follows: Dwarf::assemble $asm_file { cu {} { compile_unit { {low_pc [gdb_target_symbol main] DW_FORM_addr} {high_pc [gdb_target_symbol main]+0x10000 DW_FORM_addr} } { ... } I also found it necessary to make an adjustment to lib/dwarf.exp so that expressions of more than just one list element can be used in DW_TAG_... constructs. Both atomic-type.exp and dw2-bad-mips-linkage-name.exp require this new functionality. gdb/testsuite/ChangeLog: * lib/gdb.exp (gdb_target_symbol_prefix, gdb_target_symbol): New procs. * lib/dwarf.exp (_handle_DW_TAG): Handle attribute values, representing expressions, of more than one list element. * gdb.dwarf2/atomic-type.exp (Dwarf::assemble): Use gdb_target_symbol to prepend linker symbol prefix to f. * gdb.dwarf2/data-loc.exp (Dwarf::assemble): Likewise, for table_1 and table_2. * gdb.dwarf2/dw2-bad-mips-linkage-name.exp (Dwarf::assemble): Likewise, for f and g. * gdb.dwarf2/dw2-ifort-parameter.exp (Dwarf::assemble): Likewise, for ptr. * gdb.dwarf2/dw2-regno-invalid.exp (Dwarf::assemble): Likewise, for main. * gdb.dwarf2/dynarr-ptr.exp (Dwarf::assemble): Likewise, for table_1_ptr and table_2_ptr.
2015-11-05Revert patch for PR 19119, which led to PR 19172 and 19197.Cary Coutant3-11/+12
Gold does not support all the emulations that Gnu ld does, and supports only one spelling per target. The -m option is used only in the rare case where there are no ELF input files, and we produce an empty output file. In those cases, users are expected to supply a -m option naming one of the supported emulations. In the many cases where a build script provides an unnecessary -m option naming an emulation that gold does not support, we will simply ignore the option, as we did before the reverted patch. gold/ PR gold/19119 PR gold/19172 PR gold/19197 Revert commit 6457197210144f50a696097c0d308d81d46d5510: 2015-10-16 H.J. Lu <hongjiu.lu@intel.com> * options.h (General_options): Remove "obsolete" from -m. * parameters.cc (set_parameters_target): Check if input target is compatible with output emulation set by "-m emulation".
2015-11-05Add aarch64-specific --no-apply-dynamic-relocs option.Cary Coutant3-0/+37
With --no-apply-dynamic-relocs on aarch64 targets, gold will not apply link-time values for absolute relocations that become dynamic relocations. This provides a workaround for broken Android dynamic linkers that use the link-time value as an extra addend to the relocation. gold/ PR gold/19163 * aarch64.cc (Target_aarch64::Relocate::relocate): Don't apply certain relocations if --no-apply-dynamic-relocs is set. * options.h (--apply-dynamic-relocs): New aarch64-specific option.
2015-11-05Use aarch64_decode_insn in aarch64_displaced_step_copy_insnYao Qi2-1/+10
gdb: 2015-11-05 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_displaced_step_copy_insn): Call aarch64_decode_insn and decode instruction by aarch64_inst.
2015-11-05Use aarch64_decode_insn in aarch64_analyze_prologueYao Qi2-343/+98
This patch convert aarch64_analyze_prologue to using aarch64_decode_insn to decode instructions. After this change, aarch64_analyze_prologue looks much simple, and some aarch64_decode_* functions are removed accordingly. gdb: 2015-11-05 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (extract_signed_bitfield): Remove. (decode_masked_match): Remove. (aarch64_decode_add_sub_imm): Remove. (aarch64_decode_br): Remove. (aarch64_decode_eret): Remove. (aarch64_decode_movz): Remove. (aarch64_decode_orr_shifted_register_x): Remove. (aarch64_decode_ret): Remove. (aarch64_decode_stp_offset): Remove. (aarch64_decode_stur): Remove. (aarch64_analyze_prologue): Call aarch64_decode_insn and use aarch64_inst to decode instructions.
2015-11-05Combine aarch64_decode_stp_offset_wb and aarch64_decode_stp_offsetYao Qi2-59/+22
This patch combines both aarch64_decode_stp_offset_wb and aarch64_decode_stp_offset together. gdb: 2015-11-05 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_decode_stp_offset): New argument wback. (aarch64_decode_stp_offset_wb): Removed. (aarch64_analyze_prologue): Don't use aarch64_decode_stp_offset_wb.
2015-11-05Regenerate ld/Makefile.inAlan Modra2-0/+6
* Makefile.in: Regenerate.
2015-11-05Automatic date update in version.inGDB Administrator1-1/+1
2015-11-04Fortran: allocate()d memory is uninitializedJan Kratochvil2-1/+6
allocate (vla1 (5)) ! vla1-not-allocated l = allocated(vla1) ! vla1-allocated <------------------ Expecting: ^(510-data-evaluate-expression vla1[^M ]+)?(510\^done,value="\(0, 0, 0, 0, 0\)"[^M ]+[(]gdb[)] ^M [ ]*) 510-data-evaluate-expression vla1^M 510^done,value="(1.82987403e-09, 7.8472714e-44, 1.82987403e-09, 7.8472714e-44, 2.67929926e+20)"^M (gdb) ^M FAIL: gdb.mi/mi-vla-fortran.exp: evaluate allocated vla gcc-4.9.2-6.fc21.x86_64 I think some older gfortran did initialize allocated memory but that is an unspecified behavior. I haven't found any initialization mentioned in Fortran 90 standard (draft) and it is also clearly stated here: https://software.intel.com/en-us/forums/intel-fortran-compiler-for-linux-and-mac-os-x/topic/268786 Initialization to 0 of allocated arrays (of integers) is an implementation issue. i.e. do not rely on it. Joel Brobecker wrote: I am wondering if it might be better to just relax instead the regexp to allow any number rather than just remove the test altogether. The test allows us to verify that, as soon as we're past the "allocate" call, we no longer say "not allocated". gdb/testsuite/ChangeLog 2015-11-03 Jan Kratochvil <jan.kratochvil@redhat.com> Joel Brobecker <brobecker@adacore.com> * gdb.mi/mi-vla-fortran.exp (evaluate allocated vla): Permit any data.
2015-11-04gdb/s390-linux: Step over MVCLE+JO (and similiar) as a unit.Marcin Kościelnicki2-0/+123
This is needed to avoid O(n**2) complexity when recording MVCLE and other partial execution instructions. gdb/ChangeLog: PR/18376 * gdb/s390-linux-tdep.c (s390_is_partial_instruction): New function. (s390_software_single_step): New function. (s390_displaced_step_hw_singlestep): New function. (s390_gdbarch_init): Fill gdbarch slots with the above.
2015-11-04gdb: Add process record and replay support for s390.Marcin Kościelnicki7-3/+4552
gdb/ChangeLog: PR/18376 * gdb/configure.tgt: Add linux-record.o to s390*-linux. * gdb/s390-linux-tdep.c: #include "linux-record.h", "record-full.h" (s390_linux_record_tdep): New static global variable. (s390x_linux_record_tdep): New static global variable. (s390_all_but_pc_registers_record): New function. (s390_canonicalize_syscall): New function. (s390_linux_syscall_record): New function. (s390_linux_record_signal): New function. (s390_record_calc_disp_common): New function. (s390_record_calc_disp): New function. (s390_record_calc_disp_vsce): New function. (s390_record_calc_rl): New function. (s390_record_gpr_g): New function. (s390_record_gpr_h): New function. (s390_record_vr): New function. (s390_process_record): New function. (s390_init_linux_record_tdep): New function. (s390_gdbarch_init): Fill record function slots. gdb/testsuite/ChangeLog: * gdb.reverse/s390-mvcle.c: New test. * gdb.reverse/s390-mvcle.exp: New file. * lib/gdb.exp: Enable reverse tests on s390*-linux.
generated by cgit v1.1 at 2024-09-16 22:18:57 +0000