| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This commit adds a new function to the target description API within
GDB. This new function is not used in this commit, but will be used
in the next commit, I'm splitting it out into a separate patch for
easier review.
What I want to do in the next commit is check to see if a target
description supplied a particular register, however, the register in
question could appear in one of two possible features.
The new function allows me to ask the tdesc_arch_data whether a
register was found and assigned a particular GDB register number once
all of the features have been checked. I think this is a much simpler
solution than adding code such that, while checking each feature, I
spot if the register I'm processing is the one I care about.
No tests here as the new code is not used, but this code will be
exercised in the next commit.
|
|
On RISC-V the FCSR (float control/status register) is split into two
parts, FFLAGS (the flags) and FRM (the rounding mode). Both of these
two fields are part of the FCSR register, but can also be accessed as
separate registers in their own right. And so, we have three separate
registers, $fflags, $frm, and $fcsr, with the last of these being the
combination of the first two.
Here's how the bits of FCSR are split between FRM and FFLAGS:
,--------- FFLAGS
|---|
76543210 <----- FCSR
|-|
'--------------FRM
Here's how GDB currently displays these registers:
(gdb) info registers $fflags $frm $fcsr
fflags 0x0 RD:0 NV:0 DZ:0 OF:0 UF:0 NX:0
frm 0x0 FRM:0 [RNE (round to nearest; ties to even)]
fcsr 0x0 RD:0 NV:0 DZ:0 OF:0 UF:0 NX:0 FRM:0 [RNE (round to nearest; ties to even)]
Notice the 'RD' field which is present in both $fflags and $fcsr.
This field contains the value of the FRM field, which makes sense when
displaying the $fcsr, but makes no sense when displaying $fflags, as
the $fflags doesn't include the FRM field.
Additionally, the $fcsr already includes an FRM field, so the
information in 'RD' is duplicated. Consider this:
(gdb) set $frm = 0x3
(gdb) info registers $fflags $frm $fcsr │
fflags 0x0 RD:0 NV:0 DZ:0 OF:0 UF:0 NX:0
frm 0x3 FRM:3 [RUP (Round up towards +INF)]
fcsr 0x60 RD:3 NV:0 DZ:0 OF:0 UF:0 NX:0 FRM:3 [RUP (Round up towards +INF)]
See how the 'RD' field in $fflags still displays 0, while the 'RD' and
'FRM' fields in $fcsr show the same information.
The first change I propose in this commit is to remove the 'RD'
field. After this change the output now looks like this:
(gdb) info registers $fflags $frm $fcsr
fflags 0x0 NV:0 DZ:0 OF:0 UF:0 NX:0
frm 0x0 FRM:0 [RNE (round to nearest; ties to even)]
fcsr 0x0 NV:0 DZ:0 OF:0 UF:0 NX:0 FRM:0 [RNE (round to nearest; ties to even)]
Next, I spotted that the text that goes along with the 'FRM' field was
not wrapped in the i18n markers for internationalisation, so I added
those.
Next, I spotted that:
(gdb) set $frm=0x7
(gdb) info registers $fflags $frm $fcsr
fflags 0x0 RD:0 NV:0 DZ:0 OF:0 UF:0 NX:0
frm 0x7 FRM:3 [RUP (Round up towards +INF)]
fcsr 0xe0 RD:7 NV:0 DZ:0 OF:0 UF:0 NX:0 FRM:3 [RUP (Round up towards +INF)]
Notice that despite being a 3-bit field, FRM masks to 2-bits.
Checking the manual I can see that the FRM field is 3-bits, and is
defined for all 8 values. That GDB masks to 2-bits is just a bug I
think, so I've fixed this.
Finally, the 'FRM' text for value 0x7 is wrong. Currently we use the
text 'dynamic rounding mode' for value 0x7. However, this is not
really correct.
A RISC-V instruction can either encode the rounding mode within the
instruction, or a RISC-V instruction can choose to use a global,
dynamic rounding mode.
So, for the rounding-mode field of an _instruction_ the value 0x7
indicates "dynamic round mode", the instruction should defer to the
rounding mode held in the FRM field of the $fcsr.
But it makes no sense for the FRM of $fcsr to itself be set to
0x7 (dynamic rounding mode), and indeed, section 11.2, "Floating-Point
Control and Status Register" of the RISC-V manual, says that a value
of 0x7 in the $fcsr FRM field is invalid, and if an instruction has
_its_ round-mode set to dynamic, and the FRM field is also set to 0x7,
then an illegal instruction exception is raised.
And so, I propose changing the text for value 0x7 of the FRM field to
be "INVALID[7] (Dynamic rounding mode)". We already use the text
"INVALID[5]" and "INVALID[6]" for the two other invalid fields,
however, I think adding the extra "Dynamic round mode" hint might be
helpful.
I've added a new test that uses 'info registers' to check what GDB
prints for the three registers related to this patch. There is one
slight oddity with this test - for the fflags and frm registers, the
test accepts both the "normal" output (as described above), but also
allows these registers to be reported as '<unavailable>'.
The reason why I accept <unavailable> is that currently, the RISC-V,
native Linux target advertises these registers in its target
description, but then doesn't support reading or writing of these
registers, this results in the registers being reported as
unavailable.
A later patch in this series will address this issue, and will remove
this check for <unavailable>.
|
|
* configure.tgt (aarch64*-*-openbsd*): Add target.
|
|
The following GDB behavior was also reported as a GDB bug in
https://sourceware.org/bugzilla/show_bug.cgi?id=28396
I will reiterate the problem a bit and give some more information here.
This patch closes the above mentioned bug.
The DWARF 5 standard 2.23 'Template Parameters' reads:
A template type parameter is represented by a debugging information
entry with the tag DW_TAG_template_type_parameter. A template value
parameter is represented by a debugging information entry with the tag
DW_TAG_template_value_parameter. The actual template parameter entries
appear in the same order as the corresponding template formal
parameter declarations in the source progam.
A type or value parameter entry may have a DW_AT_name attribute, whose
value is a null-terminated string containing the name of the
corresponding formal parameter.
So the DW_AT_name attribute for DW_TAG_template_type_parameter and
DW_TAG_template_value_parameter is optional.
Within GDB, creating a new symbol from some read DIE usually requires the
presence of a DW_AT_name for the DIE (an exception here is the case of
unnamed namespaces or the existence of a linkage name).
This patch makes the presence of the DW_AT_name for template value/type
tags optional, similar to the unnamed namespaces.
For unnamed namespaces dwarf2_name simply returns the constant string
CP_ANONYMOUS_NAMESPACE_STR '(anonymous namespace)'. For template tags a
case was added to the switch statement calling the
unnamed_template_tag_name helper. Within the scope of parent which
the template parameter is a child of, the helper counts the position
of the template tag within the unnamed template tags and returns
'<unnamedNUMBER>' where NUMBER is its position. This way we end up with
unique names within the respective scope of the function/class/struct
(these are the only currenltly supported template kinds within GDB and
usually the compilers) where we discovered the template tags in.
While I do not know of a way to bring GCC to emit template tags without
names there is one for clang/icpx. Consider the following example
template<typename A, typename B, typename C>
class Foo {};
template<typename, typename B, typename>
class Foo;
int main () {
Foo<double, int, float> f;
return 0;
}
The forward declaration for 'Foo' with the missing template type names
'A' and 'C' makes clang emit a bunch of template tags without names:
...
<2><43>: Abbrev Number: 3 (DW_TAG_variable)
<44> DW_AT_location : 2 byte block: 91 78 (DW_OP_fbreg: -8)
<47> DW_AT_name : (indirect string, offset: 0x63): f
<4b> DW_AT_decl_file : 1
<4c> DW_AT_decl_line : 8
<4d> DW_AT_type : <0x59>
...
<1><59>: Abbrev Number: 5 (DW_TAG_class_type)
<5a> DW_AT_calling_convention: 5 (pass by value)
<5b> DW_AT_name : (indirect string, offset: 0x74): Foo<double, int, float>
<5f> DW_AT_byte_size : 1
<60> DW_AT_decl_file : 1
<61> DW_AT_decl_line : 2
<2><62>: Abbrev Number: 6 (DW_TAG_template_type_param)
<63> DW_AT_type : <0x76>
<2><67>: Abbrev Number: 7 (DW_TAG_template_type_param)
<68> DW_AT_type : <0x52>
<6c> DW_AT_name : (indirect string, offset: 0x6c): B
<2><70>: Abbrev Number: 6 (DW_TAG_template_type_param)
<71> DW_AT_type : <0x7d>
...
Befor this patch, GDB would not create any symbols for the read template
tag DIEs and thus lose knowledge about them. Breaking at the return
statement and printing f's type would read
(gdb) ptype f
type = class Foo<double, int, float> [with B = int] {
<no data fields>
}
After this patch GDB does generate symbols from the DWARF (with their
artificial names:
(gdb) ptype f
type = class Foo<double, int, float> [with <unnamed0> = double, B = int,
<unnamed1> = float] {
<no data fields>
}
The same principle theoretically applies to template functions. Also
here, GDB would not record unnamed template TAGs but I know of no visual
way to trigger and test this changed behavior. Template functions do
not emit a '[with...]' list and their name generation also does not
suffer from template tags without names. GDB does not check whether or
not a template tag has a name in 'dwarf2_compute_name' and thus, the
names of the template functions are created independently of whether or
not the template TAGs have a DW_TAT_name attribute. A testcase has
been added in the gdb.dwarf2 for template classes and structs.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28396
|
|
When writing a dwarf testcase for some C++ code I wanted to use the
MACRO_AT_range which in turn uses the function_range proc in dwarf.exp
to extract the bounds of 'main'.
However, the macro failed as GDB prints the C++ 'main' with its
arguments as 'main(int, char**)' or 'main()'.
The reason for this is that in read.c::dwarf2_compute_name we call
c_type_print_args on C++ functions and append their arguments to the
function name. This happens to all C++ functions, but is only visible
when the function doesn't have a linkage name.
An example might make this more clear. Given the following code
>> cat c.cpp
int foo (int a, float b)
{
return 0;
}
int main (int argc, char **argv)
{
return 0;
}
which is legal in both languages, C and C++, and compiling it with
e.g. clang or gcc will make the disassemble command look like:
>> clang --version
clang version 10.0.0-4ubuntu1
...
>> clang -O0 -g ./c.cpp
>> gdb -q ./a.out -ex "start"
...
(gdb) disassemble main
Dump of assembler code for function main(int, char**):
0x0000000000401120 <+0>: push %rbp
0x0000000000401121 <+1>: mov %rsp,%rbp
...
0x0000000000401135 <+21>: ret
End of assembler dump.
(gdb) disassemble foo
Dump of assembler code for function _Z3fooif:
0x0000000000401110 <+0>: push %rbp
0x0000000000401111 <+1>: mov %rsp,%rbp
...
0x000000000040111f <+15>: ret
End of assembler dump.
Note, that main is emitted with its arguments while for foo the linkage
name is being printed, as also visible in its DWARF:
>> objdump ./a.out --dwarf=info | grep "foo" -A3 -B3
<2b> DW_AT_low_pc : 0x401110
<33> DW_AT_high_pc : 0x10
<37> DW_AT_frame_base : 1 byte block: 56 (DW_OP_reg6 (rbp))
<39> DW_AT_linkage_name: (indirect string, offset: 0x39): _Z3fooif
<3d> DW_AT_name : (indirect string, offset: 0x42): foo
<41> DW_AT_decl_file : 1
<42> DW_AT_decl_line : 1
<43> DW_AT_type : <0x9a>
Now, let's rename the C++ file and compile it as C:
>> mv c.cpp c.c
>> clang -O0 -g ./c.c
>> gdb -q ./a.out -ex "start'
...
(gdb) disassemble main
Dump of assembler code for function main:
0x0000000000401120 <+0>: push %rbp
0x0000000000401121 <+1>: mov %rsp,%rbp
...
0x0000000000401135 <+21>: ret
End of assembler dump.
(gdb) disassemble foo
Dump of assembler code for function foo:
0x0000000000401110 <+0>: push %rbp
0x0000000000401111 <+1>: mov %rsp,%rbp
...
0x000000000040111f <+15>: ret
End of assembler dump.
Note, for foo we did not get a linkage name emitted in DWARF, so
it is printed by its name:
>> objdump --dwarf=info ./a.out | grep foo -A3 -B3
<2b> DW_AT_low_pc : 0x401110
<33> DW_AT_high_pc : 0x10
<37> DW_AT_frame_base : 1 byte block: 56 (DW_OP_reg6 (rbp))
<39> DW_AT_name : (indirect string, offset: 0x37): foo
<3d> DW_AT_decl_file : 1
<3e> DW_AT_decl_line : 1
<3f> DW_AT_prototyped : 1
To make the macro and proc work with C++ as well, an optional argument
list was added to the regex matching the function name in the
disassemble command in function_range. This does not change any used
behavior as currently, there exists no C++ test using the proc
function_range.
Signed-off-by: Nils-Christian Kempke <nils-christian.kempke@intel.com>
|
|
The call to debuginfod_debuginfo_query in elf_symfile_read is given
objfile->original_name as the filename to print when downloading the
objfile's debuginfo.
In some cases original_name is prefixed with gdb's working directory
even though the objfile is not located in the working directory. This
causes debuginfod to display the wrong path of the objfile during a download.
Fix this by using the objfile's bfd filename instead.
|
|
|
|
Initially, since c6c37250e98f113755e0d787f7070e2ac80ce77e (in 1999),
in order to fix linking against Microsoft import libraries, ld did
internally rename members of such libraries. At that point, the
criteria for being considered a Microsoft import library was that
every archive member had the same name (no regard for exactly what
that name was).
This was later amended in 44dbf3639f127af46d569ad96b6242dfbc4c0a89
(in 2003) to allow for Microsoft import libraries with intermixed
static object files. At this point, the criteria were extended, so
that all members following the first member named *.dll either had
the exact same member name, or be named *.obj. (Curiously, this would
allow members with any name if it precedes the first one named *.dll.)
In practice, Microsoft style import libraries can contain
members for linking against more than one DLL (built by merging
multiple regular import libraries into one).
Instead of trying to do validation of the whole archive before
considering it a Microsoft style import library, relax the criteria
for doing the member renaming: If an archive member is named *.dll
and it contains .idata sections, assume that that member is a
Microsoft import file, and apply the renaming scheme.
This works for imports for any number of DLLs in the same library,
intermixed with other static object files (regardless of their
names), and vastly simplifies the code.
LLVM generates Microsoft style import libraries, and Rust builds
seem to bundle up multiple import libraries together with some
Rust specific static objects. This fixes linking directly against
them with ld.bfd.
|
|
When building with Clang 14 (using gcc 12 libstdc++ headers), I get:
CXX dwarf2/read.o
In file included from /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:94:
/home/simark/src/binutils-gdb/gdb/../gdbsupport/parallel-for.h:142:21: error: 'result_of<(lambda at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7124:5) (__gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter> *, std::__cxx1998::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>>, std::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>, std::random_access_iterator_tag>, __gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter> *, std::__cxx1998::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>>, std::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>, std::random_access_iterator_tag>)>' is deprecated: use 'std::invoke_result' instead [-Werror,-Wdeprecated-declarations]
= typename std::result_of<RangeFunction (RandomIt, RandomIt)>::type;
^
/home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7122:14: note: in instantiation of function template specialization 'gdb::parallel_for_each<__gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter> *, std::__cxx1998::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>>, std::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>, std::random_access_iterator_tag>, (lambda at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7124:5)>' requested here
= gdb::parallel_for_each (1, per_bfd->all_comp_units.begin (),
^
/usr/bin/../lib64/gcc/x86_64-pc-linux-gnu/12.1.1/../../../../include/c++/12.1.1/type_traits:2597:9: note: 'result_of<(lambda at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7124:5) (__gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter> *, std::__cxx1998::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>>, std::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>, std::random_access_iterator_tag>, __gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter> *, std::__cxx1998::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>>, std::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>, std::random_access_iterator_tag>)>' has been explicitly marked deprecated here
{ } _GLIBCXX17_DEPRECATED_SUGGEST("std::invoke_result");
^
/usr/bin/../lib64/gcc/x86_64-pc-linux-gnu/12.1.1/../../../../include/c++/12.1.1/x86_64-pc-linux-gnu/bits/c++config.h:120:45: note: expanded from macro '_GLIBCXX17_DEPRECATED_SUGGEST'
# define _GLIBCXX17_DEPRECATED_SUGGEST(ALT) _GLIBCXX_DEPRECATED_SUGGEST(ALT)
^
/usr/bin/../lib64/gcc/x86_64-pc-linux-gnu/12.1.1/../../../../include/c++/12.1.1/x86_64-pc-linux-gnu/bits/c++config.h:96:19: note: expanded from macro '_GLIBCXX_DEPRECATED_SUGGEST'
__attribute__ ((__deprecated__ ("use '" ALT "' instead")))
^
It complains about the use of std::result_of, which is deprecated in
C++17 and removed in C++20:
https://en.cppreference.com/w/cpp/types/result_of
Given we'll have to transition to std::invoke_result eventually, make a
GDB wrapper to mimimc std::invoke_result, which uses std::invoke_result
for C++ >= 17 and std::result_of otherwise. This way, it will be easy
to remove the wrapper in the future, just replace gdb:: with std::.
Tested by building with gcc 12 in -std=c++11 and -std=c++17 mode, and
clang in -std=c++17 mode (I did not test fully with clang in -std=c++11
mode because there are other unrelated issues).
Change-Id: I50debde0a3307a7bc67fcf8fceefda51860efc1d
|
|
GDB overwrites Python's sys.stdout and sys.stderr, but does not
properly implement the 'flush' method -- it only ever will flush
stdout. This patch fixes the bug. I couldn't find a straightforward
way to write a test for this.
|
|
The gdb.flush documentation does not mention the 'stream' argument in
the function signature, only in the description. This patch fixes the
oversight.
|
|
PR 29529
* dwarf2.c (struct line_info_table): Add new field:
use_dir_and_file_0.
(concat_filename): Use new field to help select the correct table
slot.
(read_formatted_entries): Do not skip entry 0.
(decode_line_info): Set new field depending upon the version of
DWARF being parsed. Initialise filename based upon the setting of
the new field.
|
|
The print_one_detail_ranged_breakpoint has been renamed to
ranged_breakpoint::print_one_detail in this commit:
commit ec45bb676c9c69c30783bcf35ffdac8280f3b8bc
Date: Sat Jan 15 16:34:51 2022 -0700
Convert ranged breakpoints to vtable ops
So their comments should be updated as well.
|
|
PR 29494
* testsuite/gas/arm/pr29494.s: New test source file.
* testsuite/gas/arm/pr29494.d: New test driver.
|
|
Running configure and make in binutils-gdb.
$ ./configure
$ make
In file included from ./as.h:37,
from ./config/loongarch-lex.l:21,
from config/loongarch-lex-wrapper.c:20:
./config.h:206: error: “PACKAGE” redefined [-Werror]
#define PACKAGE "gas"
...
gas/config
* loongarch-lex-wrapper.c
|
|
Three-part patch set from Tsukasa OI to support zmmul in assembler.
The 'Zmmul' is a RISC-V extension consisting of only multiply instructions
(a subset of 'M' which has multiply and divide instructions).
bfd/
* elfxx-riscv.c (riscv_implicit_subsets): Add 'Zmmul' implied by 'M'.
(riscv_supported_std_z_ext): Add 'Zmmul' extension.
(riscv_multi_subset_supports): Add handling for new instruction class.
gas/
* testsuite/gas/riscv/attribute-09.d: Updated implicit 'Zmmul' by 'M'.
* testsuite/gas/riscv/option-arch-02.d: Likewise.
* testsuite/gas/riscv/m-ext.s: New test.
* testsuite/gas/riscv/m-ext-32.d: New test (RV32).
* testsuite/gas/riscv/m-ext-64.d: New test (RV64).
* testsuite/gas/riscv/zmmul-32.d: New expected output.
* testsuite/gas/riscv/zmmul-64.d: Likewise.
* testsuite/gas/riscv/m-ext-fail-xlen-32.d: New test (failure
by using RV64-only instructions in RV32).
* testsuite/gas/riscv/m-ext-fail-xlen-32.l: Likewise.
* testsuite/gas/riscv/m-ext-fail-zmmul-32.d: New failure test
(RV32 + Zmmul but with no M).
* testsuite/gas/riscv/m-ext-fail-zmmul-32.l: Likewise.
* testsuite/gas/riscv/m-ext-fail-zmmul-64.d: New failure test
(RV64 + Zmmul but with no M).
* testsuite/gas/riscv/m-ext-fail-zmmul-64.l: Likewise.
* testsuite/gas/riscv/m-ext-fail-noarch-64.d: New failure test
(no Zmmul or M).
* testsuite/gas/riscv/m-ext-fail-noarch-64.l: Likewise.
include/
* opcode/riscv.h (enum riscv_insn_class): Added INSN_CLASS_ZMMUL.
ld/
* testsuite/ld-riscv-elf/attr-merge-arch-01.d: We don't care zmmul in
these testcases, so just replaced m by a.
* testsuite/ld-riscv-elf/attr-merge-arch-01a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-01b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-02a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-user-ext-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-user-ext-rv32i2p1_a2p0.s: Renamed.
* testsuite/ld-riscv-elf/attr-merge-user-ext-rv32i2p1_a2p1.s: Renamed.
opcodes/
* riscv-opc.c (riscv_opcodes): Updated multiply instructions to zmmul.
|
|
When running the included test-case, we run into:
...
(gdb) break _start^M
read.h:309: internal-error: set_length: \
Assertion `m_length == length' failed.^M
...
The problem is that while there are two CUs:
...
$ readelf -wi debug-names-missing-cu | grep @
Compilation Unit @ offset 0x0:
Compilation Unit @ offset 0x2d:
...
the CU table in the .debug_names section only contains the first one:
...
CU table:
[ 0] 0x0
...
The incomplete CU table makes create_cus_from_debug_names_list set the size of
the CU at 0x0 to the actual size of both CUs combined.
This eventually leads to the assert, when we read the actual size from the CU
header.
While having an incomplete CU table in a .debug_names section is incorrect,
we need a better failure mode than asserting.
The easiest way to fix this is to set the length to 0 (meaning: unkown) in
create_cus_from_debug_names_list.
This makes the failure mode to accept the incomplete CU table, but to ignore
the missing CU.
It would be nice to instead reject the .debug_names index, and build a
complete CU list, but the point where we find this out is well after
dwarf2_initialize_objfile, so it looks rather intrusive to restart at that
point.
Tested on x86_64-linux.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29453
|
|
I tried out the script gdb/gdb_mbuild.sh, and ran into:
...
score-elf ...
... configure --target=score-elf
... make score-elf
... run score-elf
score-elf: gdb dumped core
Terminated
...
Gdb runs into this internal error in initialize_current_architecture:
...
if (! gdbarch_update_p (info))
internal_error (__FILE__, __LINE__,
_("initialize_current_architecture: Selection of "
"initial architecture failed"));
...
The call to gdbarch_update_p fails because commit 575b4c298a6 ("gdb: Remove
support for S+core") removed support for the architecture.
Fix this by adding score-*-* to the list of obsolete targets in
gdb/configure.tgt, such that we're no longer able to build the configuration:
...
*** Configuration score-unknown-elf is obsolete.
*** Support has been REMOVED.
make: *** [Makefile:12806: configure-gdb] Error 1
...
Also remove the related line from the "Target Instruction Set Architectures"
list in gdb/MAINTAINERS, such that gdb/gdb_mbuild.sh no longer tries to build
it.
|
|
|
|
|
|
out_inc_line_addr and relax_inc_line_addr are passed INT_MAX as
line_delta to flag end of section. This filters its way down to
size_inc_line_addr and emit_inc_line_addr. Pass line_delta on to
scale_addr_delta where it can be used to omit an unaligned opcode
error.
PR 29494
* dwarf2dbg.c (scale_addr_delta): Delete unnecessary forward decl.
Add line_delta param. Don't print error at end of section, just
round the address down.
(size_inc_line_addr, emit_inc_line_addr): Adjust calls.
|
|
|
|
read_indexed_address function is using offset_size instead of
addr_size while reading addrx forms.
|
|
|
|
Similar to 911438f9f4 ("gdbsupport: fix array-view compilation with
c++11 && _GLIBCXX_DEBUG"), but for gdb::optional.
I get this error when building with Clang 14 and -std=c++11:
CXX agent.o
In file included from /home/simark/src/binutils-gdb/gdbsupport/agent.cc:20:
In file included from /home/simark/src/binutils-gdb/gdbsupport/common-defs.h:210:
In file included from /home/simark/src/binutils-gdb/gdbsupport/common-debug.h:23:
/home/simark/src/binutils-gdb/gdbsupport/../gdbsupport/gdb_optional.h:213:5: error: use of this statement in a constexpr function is a C++14 extension [-Werror,-Wc++14-extensions]
gdb_assert (this->has_value ());
^
/home/simark/src/binutils-gdb/gdbsupport/gdb_assert.h:35:3: note: expanded from macro 'gdb_assert'
((void) ((expr) ? 0 : \
^
Change-Id: If0cf55607fc9dbd1925ccb97cd9abbf8993ff264
|
|
Change from int to target_waitkind, which is really what is is. While
at it, remove some outdated doc. The return value is described by a
relatively self-describing enum, not a numerical value like the doc
says.
Change-Id: Id899c853a857c7891c45e5b1639024067d5b59cd
|
|
Factor out the code that checks that a value is yes/no or yes/no/auto.
Add two macros to gdbsupport/common.m4 and use them in gdb/configure.ac
I inspected the changes to configure. Other than whitespace changes, we
have some benign changes to the error messages (one of them had an error
actually). There are changes to the --enable-source-highlight and
--enable-libbacktrace handling, but setting enable_source_highlight /
enable_libbacktrace was not really useful anyway, they already had the
right value.
Change-Id: I92587aec36874309e1605e2d60244649f09a757a
|
|
The fail was due to -Werror and headers included by dlfcn.h and
elf-bfd.h disagreeing about AT_DCACHEBSIZE and other AT_*. Not a
serious problem obviously, since release versions of binutils don't
enable -Werror and the defines are not used. Anyway, reduce the
number of files that might hit this problem by only including dlfcn.h
where it is needed.
PR 12265
* sysdep.h: Don't include dlfcn.h here.
* plugin.c: Include it here.
|
|
|
|
Compared to the previous version, this version fixes the comments reported by
Tom Tromey and ensures that the 'help some-user-documented-alias'
shows the alias definition to ensure the user understands this is an
alias even if specifically documented.
When using 'help ALIASNAME', GDB shows the help of the aliased command.
This is a good default behaviour.
However, GDB alias command allows to define aliases with arguments
possibly changing or tuning significantly the behaviour of
the aliased command. In such a case, showing the help of the aliased
command might not be ideal.
This is particularly true when defining an alias as a set of
nested 'with' followed by a last command to launch, such as:
(gdb) alias pp10 = with print pretty -- with print elements 10 -- print
Asking 'help pp10' shows the help of the 'with' command, which is
not particularly useful:
(gdb) help pp10
with, pp10, w
alias pp10 = with print pretty -- with print elements 10 -- print
Temporarily set SETTING to VALUE, run COMMAND, and restore SETTING.
Usage: with SETTING [VALUE] [-- COMMAND]
....
Such an alias can now be documented by the user:
(gdb) document pp10
>Pretty printing an expressiong, printing 10 elements.
>Usage: pp10 [PRINT-COMMAND-OPTIONS] EXP
>See 'help print' for more information.
>end
(gdb) help pp10
alias pp10 = with print pretty -- with print elements 10 -- print
Pretty printing an expressiong, printing 10 elements.
Usage: pp10 [PRINT-COMMAND-OPTIONS] EXP
See 'help print' for more information.
(gdb)
When a user-defined alias is documented specifically, help and apropos
use the provided alias documentation instead of the documentation of
the aliased command.
Such a documented alias is also not shown anymore in the help of the
aliased command, and the alias is not listed anymore in the help
of the aliased command. In particular for cases such as pp10 example above,
indicating that pp10 is an alias of the 'with' command is confusing.
|
|
Noticed while doing mass builds with a very recent GCC:
/usr/lib/gcc-snapshot/bin/gcc -DHAVE_CONFIG_H -DWITH_HW=1 -DHAVE_DV_SOCKSER -DDEFAULT_INLINE=0 -Wall -Wdeclaration-after-statement -Wpointer-arith -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wunused-but-set-parameter -Wno-error=maybe-uninitialized -Wmissing-declarations -Wmissing-prototypes -Wdeclaration-after-statement -Wmissing-parameter-type -Wpointer-sign -Wold-style-declaration -Werror -I. -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64 -I../common -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64/../common -I../../include -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64/../../include -I../../bfd -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64/../../bfd -I../../opcodes -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64/../../opcodes -I../.. -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64/../../gnulib/import -I../../gnulib/import -g -O2 -c -o cpustate.o -MT cpustate.o -MMD -MP -MF .deps/cpustate.Tpo cpustate.c
cpustate.c:270:1: error: conflicting types for 'aarch64_get_CPSR_bits' due to enum/integer mismatch; have 'uint32_t(sim_cpu *, FlagMask)' {aka 'unsigned int(struct _sim_cpu *, FlagMask)'} [-Werror=enum-int-mismatch]
270 | aarch64_get_CPSR_bits (sim_cpu *cpu, FlagMask mask)
| ^~~~~~~~~~~~~~~~~~~~~
In file included from sim-main.h:30,
from cpustate.c:28:
cpustate.h:310:20: note: previous declaration of 'aarch64_get_CPSR_bits' with type 'uint32_t(sim_cpu *, uint32_t)' {aka 'unsigned int(struct _sim_cpu *, unsigned int)'}
310 | extern uint32_t aarch64_get_CPSR_bits (sim_cpu *, uint32_t);
| ^~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
|
|
On x86, the PLT entry in executable may be used as function address for
functions in shared libraries. If functions are protected, the function
address used in executable can be different from the function address
used in shared library. This will lead to incorrect run-time behavior
if function pointer equality is needed. By default, x86 linker issues
an error in this case.
On Solaris, linker issued an error for
struct tm *tb = (kind == CPP_time_kind::FIXED ? gmtime : localtime) (&tt);
where gmtime is a protected function in libc.so. Use gmtime's PLT entry
in executable as function address is safe since function pointer equality
isn't needed. Ignore protected visibility in shared libraries on Solaris
to disable linker error. If function pointer equality is needed, linker
will silently generate executable with incorrect run-time behavior on
Solaris.
PR ld/29512
* elf32-i386.c (elf_i386_scan_relocs): Ignore protected
visibility in shared libraries on Solaris.
* elf64-x86-64.c (elf_x86_64_scan_relocs): Likewise.
|
|
PR 29517
* dwarf2dbg.c (GAS_ABBREV_COMP_UNIT): New defined constant.
(GAS_ABBREV_SUBPROG): New defined constant.
(GAS_ABBREV_NO_TYPE): New defined constant.
(out_debug_abbrev): Use the new defined constants when emitting
abbreviation numbers. Generate an abbreviation for an unspecified
type.
(out_debug_info): Use the new defined constants when referring to
abbreviations. Generate a use of the no_type abbreviation.
Reference the use when generating DIEs for functions.
* testsuite/gas/elf/dwarf-3-func.d: Update to allow for newly
extended output from the assembler.
* testsuite/gas/elf/dwarf-5-func-global.d: Likewise.
* testsuite/gas/elf/dwarf-5-func-local.d: Likewise.
* testsuite/gas/elf/dwarf-5-func.d: Likewise.
|
|
PR 29519
* config/tc-aarch64.c (s_unreq): Use find_end_of_line().
(s_aarch64_cpu): Likewise.
(s_aarch64_arch): Likewise.
(s_aarch64_arch_extension): Likewise.
* testsuite/gas/aarch64/pr29519.d: New test driver file.
* testsuite/gas/aarch64/pr29519.s: New test source file.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Don't overload bfd_reloc_outofrange with what is really a domain error
(target at odd address), or an overflow.
PR 11290
* reloc.c (bfd_reloc_other): Correct comment.
* elf32-avr.c (avr_final_link_relocate): Return bfd_reloc_other
for unaligned reloc target values. Return bfd_reloc_overflow
when stubs are too far away and when R_AVR_LDS_STS_16,
R_AVR_PORT6, or R_AVR_PORT5 overflow.
(elf32_avr_relocate_section): Report more descriptive relocation
errors.
* bfd-in2.h: Regenerate.
|
|
This fixes the coding style of an old, preexisting function.
|
|
PR 10372
* testsuite/ld-sh/start.s: Add _start sym. Use trapa 34. Create
an alloc .stack section.
|
|
Fixes loongarch32-elf +FAIL: medium jirl plt
* testsuite/ld-loongarch-elf/cmodel.exp: Don't run test when
no shared library support.
|
|
|
|
cross compiling too
On Windows, filename_cmp is case insensitive, but when cross compiling
with libraries that may contain members with uppercase file names, we
should keep those comparisons case insensitive when running the build
tools on other OSes too.
Also make the check for .def consistent with the other ones, fixing
out of bounds reads if file names are shorter than 4 characters.
|
|
There's been a long-standing bug in the arm backend where
target-specific directives did not correctly handle lines with
multiple statements. This patch fixes the issue for all the cases
I've been able to find.
It does result in a slight change in behaviour when errors are
encountered: where, previously,
.cpu arm6 bar
would result in the error "junk at end of line, first unrecognized
character is `b'", we now get "unknown cpu `arm6 bar'", which I think
is slightly more helpful anyway. Similar errors are generated for
other directives.
|
|
When debugging a certain class of GDB bug, I often end up wanting to
know what GDB thinks the frame-id is in a particular frame. It's
not too hard to pull this from some debug output, but I thought it
might be nice if there was a maintenance command that could tell us.
This commit adds 'maint print frame-id' which prints the frame-id of
the currently selected frame. You can also pass a frame level number
to find the frame-id for a specific frame.
There's a new test too.
|
|
Fix the bug that can not generate func@plt
when linking a undefined function with cmodel=medium.
Add testcase.
bfd/
* elfnn-loongarch.c
ld/testsuite/ld-loongarch-elf/
* cmodel-libjirl.dd
* cmodel.exp
* libjirl.s
|
|
|
