Age | Commit message (Collapse) | Author | Files | Lines |
|
If you take a release tarball (which has pregenerated syslex and sysinfo files
in it), apply some patches which touch syslex.l, and then build the result out
of tree, it will fail. This is because syslex.l uses sysinfo.h, but the
sysinfo.y file wasn't updated and so it wasn't regenerated (the files are found
in the $srcdir), and the build rule for syslex.c does not use -I$(srcdir) when
it finds a local file. Simple fix below.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
rx-parse.c: In function ‘rx_parse’:
rx-parse.c:3774:9: error: passing argument 1 of ‘rx_error’ discards ‘const’
qualifier from pointer target type [-Werror]
../../../gas/config/rx-defs.h:40:12: note:
expected ‘char *’ but argument is of type ‘const char *’
cc1: all warnings being treated as errors
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
fetch_lazy method.
|
|
* gdb.texinfo (Values From Inferior): Add is_lazy attribute,
fetch_lazy method.
|
|
* python/py-value.c (value_to_value_object): Remove fetching of
the value if it was lazy.
(valpy_get_is_lazy): New function.
(valpy_fetch_lazy): New function.
|
|
|
|
|
|
* Makefile.am (ALL_MACHINES): Add cpu-epiphany.lo .
(ALL_MACHINES_CFILES): Add cpu-epiphany.c .
(BFD32_BACKENDS): Add elf32-epiphany.lo .
(BFD32_BACKENDS_CFILES): Add elf32-epiphany.c .
* Makefile.in, bfd-in2.h, configure, libbfd.h: Regenerate.
* archures.c (bfd_arch_epiphany): Add.
(bfd_mach_epiphany16, bfd_mach_epiphany32): Define.
(bfd_epiphany_arch): Declare.
(bfd_archures_list): Add &bfd_epiphany_arch.
* config.bfd (epiphany-*-elf): New target case.
* configure.in (bfd_elf32_epiphany_vec): New target vector case.
* reloc.c (BFD_RELOC_EPIPHANY_SIMM8): New relocation.
(BFD_RELOC_EPIPHANY_SIMM24, BFD_RELOC_EPIPHANY_HIGH): Likewise.
(BFD_RELOC_EPIPHANY_LOW, BFD_RELOC_EPIPHANY_SIMM11): Likewise.
(BFD_RELOC_EPIPHANY_IMM11, BFD_RELOC_EPIPHANY_IMM8): Likewise.
* targets.c (bfd_elf32_epiphany_vec): Declare.
(_bfd_target_vector): Add bfd_elf32_epiphany_vec.
* po/SRC-POTFILES.in, po/bfd.pot: Regenerate.
* cpu-epiphany.c, elf32-epiphany.c: New files.
binutils:
* readelf.c (include "elf/epiphany.h")
(guess_is_rela, dump_relocation): Handle EM_ADAPTEVA_EPIPHANY.
(get_machine_name, is_32bit_abs_reloc, is_32bit_pcrel_reloc): Likewise.
(is_16bit_abs_reloc, is_none_reloc): Likewise.
* po/binutils.pot: Regenerate.
cpu:
* cpu/epiphany.cpu, cpu/epiphany.opc: New files.
gas:
* NEWS: Mention addition of Adapteva Epiphany support.
* config/tc-epiphany.c, config/tc-epiphany.h: New files.
* Makefile.am (TARGET_CPU_CFILES): Add config/tc-epiphany.c .
(TARGET_CPU_HFILES): Add config/tc-epiphany.h .
* Makefile.in, configure, doc/Makefile.in, po/POTFILES.in: Regenerate.
* configure.in: Also set using_cgen for epiphany.
* configure.tgt: Handle epiphany.
* doc/Makefile.am (CPU_DOCS): Add c-epiphany.texi .
* doc/all.texi: Set EPIPHANY.
* doc/as.texinfo: Add EPIPHANY-specific text.
* doc/c-epiphany.texi: New file.
* po/gas.pot: Regenerate.
gas/testsuite:
* gas/epiphany: New directory.
include:
* dis-asm.h (print_insn_epiphany): Declare.
* elf/epiphany.h: New file.
* elf/common.h (EM_ADAPTEVA_EPIPHANY): Define.
ld:
* NEWS: Mention addition of Adapteva Epiphany support.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32epiphany.c .
(eelf32epiphany.c): New rule.
* Makefile.in: Regenerate.
* configure.tgt: Handle epiphany-*-elf.
* po/ld.pot: Regenerate.
* testsuite/ld-srec/srec.exp: xfail epiphany.
* emulparams/elf32epiphany.sh: New file.
opcodes:
* Makefile.am (HFILES): Add epiphany-desc.h and epiphany-opc.h .
(TARGET_LIBOPCODES_CFILES): Add epiphany-asm.c, epiphany-desc.c,
epiphany-dis.c, epiphany-ibld.c and epiphany-opc.c .
(CLEANFILES): Add stamp-epiphany.
(EPIPHANY_DEPS): Set. Make CGEN-generated Epiphany files depend on it.
(stamp-epiphany): New rule.
* Makefile.in, configure, po/POTFILES.in, po/opcodes.pot: Regenerate.
* configure.in: Handle bfd_epiphany_arch.
* disassemble.c (ARCH_epiphany): Define.
(disassembler): Handle bfd_arch_epiphany.
* epiphany-asm.c, epiphany-desc.c, epiphany-desc.h: New files.
* epiphany-dis.c, epiphany-ibld.c, epiphany-opc.c: Likewise.
* epiphany-opc.h: Likewise.
|
|
* hist.c (hist_assign_samples_1): Make sure that inner loop
iterator remains valid.
|
|
* winduni.h (unicode_from_ascii_len): New prototype.
* winduni.c (unicode_from_ascii_len): New function.
* windres.h (define_stringtable): Add additional length argument.
* windres.c (define_stringtable): Add length argument for string.
* rcparse.y (res_unicode_sizedstring): New rule.
(res_unicode_sizedstring_concat): Likewise.
(string_data): Adjust rule.
2011-10-25 Kai Tietz <ktietz@redhat.com>
* binutils-all/windres/strtab4.rc: New test.
* binutils-all/windres/strtab4.rsd: Likewise.
|
|
|
|
|
|
Our testsuite noticed a crash when trying to call a function which
requires GDB to allocate memory in the inferior. Typically, this
happens when one of the parameters is a string. For instance, our
testcase tries:
(gdb) call debug.trace (me, "You")
[1] 32737 segmentation fault /path/to/gdb
What happens is that GDB sees the string, and thus tries to allocate
memory for it in the inferior:
> /* Allocate NBYTES of space in the inferior using the inferior's
> malloc and return a value that is a pointer to the allocated
> space. */
>
> struct value *
> value_allocate_space_in_inferior (int len)
> {
> struct objfile *objf;
> struct value *val = find_function_in_inferior ("malloc", &objf);
And find_function_in_inferior first searches the symtab in case
we have debug info. But, in our case (bareboard powerpc), we don't,
so it gets "malloc"'s address from the minimal symbols, and builds
a value whose type is a TYPE_CODE_PTR, not a TYPE_CODE_FUNC.
As a result, when we later try to make the call to malloc, we end up
inside the powerpc tdep code that has:
> do_ppc_sysv_return_value (struct gdbarch *gdbarch, struct type *func_type,
[...]
> if (func_type
> && TYPE_CALLING_CONVENTION (func_type) == DW_CC_GDB_IBM_OpenCL)
The problem is that func_type is not a TYPE_CODE_FUNC, and thus
the type-specific kind is not TYPE_SPECIFIC_FUNC, and so we do
TYPE_CALLING_CONVENTION is an invalid access.
Interestingly, the other call to TYPE_CALLING_CONVENTION is correctly
preceded by a check of the type's TYPE_CODE (making sure that it is
TYPE_CODE_FUNC).
gdb/ChangeLog:
* ppc-sysv-tdep.c (do_ppc_sysv_return_value): Do not check
FUNC_TYPE's calling convention if FUNC_TYPE is not a function.
|
|
* m68k-opc.c (m68k_opcodes): Fix entries for ColdFire moveml.
gas/testsuite/
* gas/m68k/all.exp (movem-offset): Add test.
* gas/m68k/movem-offset.s: New test.
* gas/m68k/movem-offset.d: New.
|
|
* dwarf.c (read_and_display_attr_value) <DW_AT_import>: Add CU_OFFSET
also for DW_FORM_ref_udata.
|
|
gdb/
* linux-nat.c (linux_handle_extended_wait): When handling a clone
event, in non-stop, if not stopping, make sure the new lwp has
last_resume_kind set to resume_continue. Assert that when we're
resuming the new lwp, its last_resume_kind is resume_continue.
|
|
|
|
|
|
(start_noreorder): Likewise.
|
|
gdb/
* infrun.c (handle_inferior_event): Don't assume inferior_ptid is
already set when marking the event thread as not executing in
non-stop mode.
|
|
(mips_elf_final_processing): Likewise.
|
|
|
|
gdb/
* infrun.c (handle_inferior_event): Add debug output for
TARGET_WAITKIND_NO_HISTORY.
|
|
assertions.
|
|
* lib/gdb.exp (can_single_step_to_signal_handler): Return 0 when
target is tic6x-*-*.
|
|
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Do not warn about
identical TAG_PCS_config attributes.
|
|
|
|
* NEWS: Move set/show extended-prompt to "New Options". Expand
description. Fix typos.
|
|
PR python/13310
* python/py-param.c (call_doc_function): Correctly deference on
function exit.
|
|
* bfd-in.h: Include <sys/stat.h> rather than forward defining
struct stat.
* bfd-in2.h: Regenerate.
|
|
|
|
|
|
|
|
|
|
|
|
* ansidecl.h (ENUM_BITFIELD): Always use enum in C++
|
|
|
|
|
|
bfd/
2011-10-21 H.J. Lu <hongjiu.lu@intel.com>
PR ld/13302
* elf32-i386.c (elf_i386_relocate_section): Replace
R_386_IRELATIVE with R_386_RELATIVE.
* elf64-x86-64.c (elf_x86_64_relocate_section): Replace
R_X86_64_IRELATIVE with R_X86_64_RELATIVE.
ld/testsuite/
2011-10-21 H.J. Lu <hongjiu.lu@intel.com>
PR ld/13302
* ld-i386/i386.exp: Run pr13302.
* ld-i386/pr13302.d: New.
* ld-i386/pr13302.s: Likewise.
* ld-x86-64/pr13082-5b.d: Updated.
* ld-x86-64/pr13082-6a.d: Likewise.
* ld-x86-64/pr13082-6b.d: Likewise.
|
|
When using the new -ada-task-info command with an argument,
the output would say that there are N entries in the returned
table, (where N is the total number of tasks present in the inferior).
But, in fact, the table would only contain at most 1 entry.
This patch fixes this by properly computing the number of
tasks being displayed before giving it to the uiout.
gdb/ChangeLog:
* ada-tasks.c (print_ada_task_info): Fix computation of
number of tasks displayed in command output.
gdb/testsuite/ChangeLog:
* gdb.ada/mi_task_info/task_switch.adb: New file.
* gdb.ada/mi_task_info.exp: New file.
|
|
* gdb.cp/expand-psymtabs-cxx.exp: New file.
* gdb.cp/expand-psymtabs-cxx.cc: New file.
|
|
2011-10-21 H.J. Lu <hongjiu.lu@intel.com>.
* elf32-i386.c (elf_i386_relocate_section): Fix a typo in
comments.
* elf64-x86-64.c (elf_x86_64_relocate_section): Likewise.
|
|
bfd/
2011-10-21 H.J. Lu <hongjiu.lu@intel.com>
PR ld/13302
* elf32-i386.c (elf_i386_link_hash_table): Add next_jump_slot_index
and next_irelative_index.
(elf_i386_link_hash_table_create): Initialize next_jump_slot_index
and next_irelative_index.
(elf_i386_allocate_dynrelocs): Increment reloc_count instead of
next_tls_desc_index.
(elf_i386_size_dynamic_sections): Set next_tls_desc_index and
next_irelative_index from reloc_count.
(elf_i386_finish_dynamic_symbol): Put R_386_IRELATIVE after
R_386_JUMP_SLOT.
* elf64-x86-64.c (elf_x86_64_link_hash_table): Add
next_jump_slot_index and next_irelative_index.
(elf_x86_64_link_hash_table_create): Initialize
next_jump_slot_index and next_irelative_index.
(elf_x86_64_size_dynamic_sections): Set next_irelative_index
from reloc_count.
(elf_x86_64_finish_dynamic_symbol): Put R_X86_64_IRELATIVE after
R_X86_64_JUMP_SLOT.
ld/testsuite/
2011-10-21 H.J. Lu <hongjiu.lu@intel.com>
PR ld/13302
* ld-ifunc/ifunc-16-i386.d: New.
* ld-ifunc/ifunc-16-x86-64.d: Likewise.
* ld-ifunc/ifunc-16-x86.s: Likewise.
|
|
* config/tc-alpha.c (load_expression): Use symbol_mark_used accessor.
(s_alpha_comm): Use symbol_set_frag accessor.
|
|
* s390-opc.txt: Add CPUMF instructions.
2011-10-21 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gas/s390/zarch-z10.d: Add CPUMF instructions.
* gas/s390/zarch-z10.s: Likewise.
|
|
|
|
* dwarf2-frame-tailcall.c: Include dwarf2-frame.h.
(dwarf2_tailcall_prev_register_first): Use dwarf2_frame_cfa.
(dwarf2_tailcall_sniffer_first): Remove variable pc_regnum. Replace
gdbarch_pc_regnum and frame_unwind_register_unsigned by
gdbarch_unwind_pc.
|
|
section to...
(partial_read_comp_unit_head): ...here. Add is_debug_type_section
flag. Adjust all callers.
(process_psymtab_comp_unit): Remove adjustment for type section.
|
|
|
|
arguments by adding OBJFILE. Instead of getting objfile from
symbol's symtab, use new argument OBJFILE.
* cp-support.h (cp_scan_for_anonymous_namespaces): Changed function
arguments by adding OBJFILE.
* gdb/dwarf2read.c (new_symbol_full): Change call to
cp_scan_for_anonymous_namespaces to match new signature.
* gdb/stabsread.c (define_symbol): Change call to
cp_scan_for_anonymous_namespaces to match new signature.
|