diff options
Diffstat (limited to 'sim')
65 files changed, 1750 insertions, 419 deletions
diff --git a/sim/ChangeLog b/sim/ChangeLog index 121f005..515e941 100644 --- a/sim/ChangeLog +++ b/sim/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * README-HACKING (C Language Assumptions): Require C11 compiler. + 2020-09-03 Jose E. Marchesi <jose.marchesi@oracle.com> * configure.ac: Do not configure sim/testsuite nor sim/igen if the diff --git a/sim/README-HACKING b/sim/README-HACKING index 26dbde2..78e60fa 100644 --- a/sim/README-HACKING +++ b/sim/README-HACKING @@ -161,33 +161,7 @@ To add the entries to an alternative ChangeLog file, use: C Language Assumptions ====================== -The programmer may assume that the simulator is being built using an -ANSI C compiler that supports a 64 bit data type. Consequently: - - o prototypes can be used - - o If sim-types.h is included, the two - types signed64 and unsigned64 are - available. - - o The type `unsigned' is valid. - -However, the user should be aware of the following: - - o GCC's `<number>LL' is NOT acceptable. - Microsoft-C doesn't reconize it. - - o MSC's `<number>i64' is NOT acceptable. - GCC doesn't reconize it. - - o GCC's `long long' MSC's `_int64' can - NOT be used to define 64 bit integer data - types. - - o An empty array (eg int a[0]) is not valid. - -When building with GCC it is effectivly a requirement that ---enable-build-warnings=,-Werror be specified during configuration. +An ISO C11 compiler is required, as is an ISO C standard library. "dump" commands under gdb ========================= diff --git a/sim/aarch64/ChangeLog b/sim/aarch64/ChangeLog index b45f8bb..97e3340 100644 --- a/sim/aarch64/ChangeLog +++ b/sim/aarch64/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/aarch64/configure b/sim/aarch64/configure index 664a9a9..a5ed5c9 100755 --- a/sim/aarch64/configure +++ b/sim/aarch64/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8648,6 +8649,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12064,16 +12114,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12190,7 +12230,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12879,7 +12919,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12882 "configure" +#line 12922 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12985,7 +13025,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12988 "configure" +#line 13028 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/arm/ChangeLog b/sim/arm/ChangeLog index 9b5b780..560632a 100644 --- a/sim/arm/ChangeLog +++ b/sim/arm/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * wrapper.c: Include stdlib.h. diff --git a/sim/arm/configure b/sim/arm/configure index e5a07c0..692cd90 100755 --- a/sim/arm/configure +++ b/sim/arm/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8648,6 +8649,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12064,16 +12114,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12190,7 +12230,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12879,7 +12919,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12882 "configure" +#line 12922 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12985,7 +13025,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12988 "configure" +#line 13028 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/avr/ChangeLog b/sim/avr/ChangeLog index d03bc95..810bd58 100644 --- a/sim/avr/ChangeLog +++ b/sim/avr/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/avr/configure b/sim/avr/configure index 99ef833..7cc3478 100755 --- a/sim/avr/configure +++ b/sim/avr/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8648,6 +8649,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12064,16 +12114,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12190,7 +12230,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12879,7 +12919,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12882 "configure" +#line 12922 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12985,7 +13025,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12988 "configure" +#line 13028 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/bfin/ChangeLog b/sim/bfin/ChangeLog index 3b9b13d..12127ec 100644 --- a/sim/bfin/ChangeLog +++ b/sim/bfin/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * machs.c: Include stdlib.h. diff --git a/sim/bfin/configure b/sim/bfin/configure index 1b071eb..0492d38 100755 --- a/sim/bfin/configure +++ b/sim/bfin/configure @@ -683,6 +683,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8691,6 +8692,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12107,16 +12157,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12233,7 +12273,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12922,7 +12962,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12925 "configure" +#line 12965 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13028,7 +13068,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 13031 "configure" +#line 13071 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/bpf/ChangeLog b/sim/bpf/ChangeLog index e5d820c..75e115f 100644 --- a/sim/bpf/ChangeLog +++ b/sim/bpf/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2020-11-01 Simon Marchi <simon.marchi@polymtl.ca> * configure: Re-generate. diff --git a/sim/bpf/configure b/sim/bpf/configure index 52f240d..b54002d 100755 --- a/sim/bpf/configure +++ b/sim/bpf/configure @@ -681,6 +681,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8653,6 +8654,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12069,16 +12119,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12195,7 +12235,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12884,7 +12924,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12887 "configure" +#line 12927 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12990,7 +13030,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12993 "configure" +#line 13033 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/common/ChangeLog b/sim/common/ChangeLog index 05948f2..df78108 100644 --- a/sim/common/ChangeLog +++ b/sim/common/ChangeLog @@ -1,3 +1,9 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * Make-common.in (C_DIALECT): Define. + (COMPILE.pre): Append $(C_DIALECT). + * acinclude.m4 (SIM_AC_COMMON): Probe C11 to define C_DIALECT. + 2021-01-07 Mike Frysinger <vapier@gentoo.org> * sim-core.c (sim_memory_map): Define. diff --git a/sim/common/Make-common.in b/sim/common/Make-common.in index 21e1d99..6e71930 100644 --- a/sim/common/Make-common.in +++ b/sim/common/Make-common.in @@ -70,6 +70,7 @@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ CC = @CC@ +C_DIALECT = @C_DIALECT@ CC_FOR_BUILD = @CC_FOR_BUILD@ CFLAGS = @CFLAGS@ CPPFLAGS = @CPPFLAGS@ @@ -107,7 +108,7 @@ depcomp = $(SHELL) $(srcroot)/depcomp # Note that these are overridden by GNU make-specific code below if # GNU make is used. The overrides implement dependency tracking. -COMPILE.pre = $(CC) +COMPILE.pre = $(CC) $(C_DIALECT) COMPILE.post = -c -o $@ COMPILE = $(COMPILE.pre) $(ALL_CFLAGS) $(COMPILE.post) POSTCOMPILE = @true diff --git a/sim/common/acinclude.m4 b/sim/common/acinclude.m4 index ff7e1ac..49d56b9 100644 --- a/sim/common/acinclude.m4 +++ b/sim/common/acinclude.m4 @@ -56,6 +56,32 @@ AR=${AR-ar} AC_SUBST(AR) AC_PROG_RANLIB +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +m4_version_prereq([2.70], [AC_MSG_ERROR([clean this up!])], [:]) +C_DIALECT= +AC_MSG_CHECKING([whether C11 is supported by default]) +AC_COMPILE_IFELSE([AC_LANG_SOURCE([ +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif +])], [AC_MSG_RESULT([yes])], [ + AC_MSG_RESULT([no]) + AC_MSG_CHECKING([for -std=c11 support]) + ac_save_CC="$CC" + CC="$CC -std=c11" + AC_COMPILE_IFELSE([AC_LANG_SOURCE([ +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif +])], [ + AC_MSG_RESULT([yes]) + CC="$ac_save_CC" + C_DIALECT="-std=c11" +], [AC_MSG_ERROR([C11 is required])])]) +AC_SUBST(C_DIALECT) + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. diff --git a/sim/cr16/ChangeLog b/sim/cr16/ChangeLog index 1df6c71..1de8e15 100644 --- a/sim/cr16/ChangeLog +++ b/sim/cr16/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/cr16/configure b/sim/cr16/configure index f294b22..ff93efd 100755 --- a/sim/cr16/configure +++ b/sim/cr16/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8648,6 +8649,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12064,16 +12114,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12190,7 +12230,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12879,7 +12919,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12882 "configure" +#line 12922 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12985,7 +13025,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12988 "configure" +#line 13028 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/cris/ChangeLog b/sim/cris/ChangeLog index 81f707d..1c4bda1 100644 --- a/sim/cris/ChangeLog +++ b/sim/cris/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/cris/configure b/sim/cris/configure index ee6a4c4..96f545d 100755 --- a/sim/cris/configure +++ b/sim/cris/configure @@ -681,6 +681,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8662,6 +8663,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12078,16 +12128,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12204,7 +12244,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12893,7 +12933,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12896 "configure" +#line 12936 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12999,7 +13039,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 13002 "configure" +#line 13042 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/d10v/ChangeLog b/sim/d10v/ChangeLog index 43d725f..a53becd 100644 --- a/sim/d10v/ChangeLog +++ b/sim/d10v/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/d10v/configure b/sim/d10v/configure index e5a07c0..692cd90 100755 --- a/sim/d10v/configure +++ b/sim/d10v/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8648,6 +8649,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12064,16 +12114,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12190,7 +12230,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12879,7 +12919,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12882 "configure" +#line 12922 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12985,7 +13025,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12988 "configure" +#line 13028 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/erc32/ChangeLog b/sim/erc32/ChangeLog index d44ed98..cab1717 100644 --- a/sim/erc32/ChangeLog +++ b/sim/erc32/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/erc32/configure b/sim/erc32/configure index 258c5e8..3e5eb6c 100755 --- a/sim/erc32/configure +++ b/sim/erc32/configure @@ -680,6 +680,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8635,6 +8636,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12051,16 +12101,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12177,7 +12217,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12866,7 +12906,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12869 "configure" +#line 12909 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12972,7 +13012,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12975 "configure" +#line 13015 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/frv/ChangeLog b/sim/frv/ChangeLog index 2d77cf3..4a9264b 100644 --- a/sim/frv/ChangeLog +++ b/sim/frv/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/frv/configure b/sim/frv/configure index 8d308b7..2ae6c7d 100755 --- a/sim/frv/configure +++ b/sim/frv/configure @@ -682,6 +682,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8657,6 +8658,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12073,16 +12123,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12199,7 +12239,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12888,7 +12928,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12891 "configure" +#line 12931 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12994,7 +13034,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12997 "configure" +#line 13037 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/ft32/ChangeLog b/sim/ft32/ChangeLog index bc768d5..48235fb 100644 --- a/sim/ft32/ChangeLog +++ b/sim/ft32/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/ft32/configure b/sim/ft32/configure index bb5f993..94c3a43 100755 --- a/sim/ft32/configure +++ b/sim/ft32/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8648,6 +8649,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12064,16 +12114,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12190,7 +12230,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12879,7 +12919,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12882 "configure" +#line 12922 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12985,7 +13025,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12988 "configure" +#line 13028 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/h8300/ChangeLog b/sim/h8300/ChangeLog index d45b75f..d01ab03 100644 --- a/sim/h8300/ChangeLog +++ b/sim/h8300/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-07 Mike Frysinger <vapier@gentoo.org> * compile.c (set_simcache_size, h8_get_cache_top, h8_set_cache_top, diff --git a/sim/h8300/configure b/sim/h8300/configure index 0faa045..a4ce368 100755 --- a/sim/h8300/configure +++ b/sim/h8300/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8640,6 +8641,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12056,16 +12106,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12182,7 +12222,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12871,7 +12911,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12874 "configure" +#line 12914 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12977,7 +13017,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12980 "configure" +#line 13020 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/iq2000/ChangeLog b/sim/iq2000/ChangeLog index 3bf077a..ba5bac6 100644 --- a/sim/iq2000/ChangeLog +++ b/sim/iq2000/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/iq2000/configure b/sim/iq2000/configure index 5bed84a..bb78dda 100755 --- a/sim/iq2000/configure +++ b/sim/iq2000/configure @@ -681,6 +681,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8654,6 +8655,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12070,16 +12120,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12196,7 +12236,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12885,7 +12925,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12888 "configure" +#line 12928 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12991,7 +13031,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12994 "configure" +#line 13034 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/lm32/ChangeLog b/sim/lm32/ChangeLog index 497d68f..3205235 100644 --- a/sim/lm32/ChangeLog +++ b/sim/lm32/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/lm32/configure b/sim/lm32/configure index a264e29..2f24adf 100755 --- a/sim/lm32/configure +++ b/sim/lm32/configure @@ -681,6 +681,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8654,6 +8655,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12070,16 +12120,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12196,7 +12236,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12885,7 +12925,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12888 "configure" +#line 12928 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12991,7 +13031,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12994 "configure" +#line 13034 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/m32c/ChangeLog b/sim/m32c/ChangeLog index 86cd750..1179044 100644 --- a/sim/m32c/ChangeLog +++ b/sim/m32c/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/m32c/configure b/sim/m32c/configure index d3aaa35..29df076 100755 --- a/sim/m32c/configure +++ b/sim/m32c/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8641,6 +8642,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12057,16 +12107,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12183,7 +12223,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12872,7 +12912,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12875 "configure" +#line 12915 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12978,7 +13018,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12981 "configure" +#line 13021 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/m32r/ChangeLog b/sim/m32r/ChangeLog index d22fb21..4529ec1 100644 --- a/sim/m32r/ChangeLog +++ b/sim/m32r/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/m32r/configure b/sim/m32r/configure index b6de36f..14c71bb 100755 --- a/sim/m32r/configure +++ b/sim/m32r/configure @@ -683,6 +683,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8656,6 +8657,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12072,16 +12122,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12198,7 +12238,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12887,7 +12927,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12890 "configure" +#line 12930 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12993,7 +13033,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12996 "configure" +#line 13036 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/m68hc11/ChangeLog b/sim/m68hc11/ChangeLog index f2e8fbc..5f57a70 100644 --- a/sim/m68hc11/ChangeLog +++ b/sim/m68hc11/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/m68hc11/configure b/sim/m68hc11/configure index 4ae8db5..2d8ff6b 100755 --- a/sim/m68hc11/configure +++ b/sim/m68hc11/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8651,6 +8652,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12067,16 +12117,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12193,7 +12233,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12882,7 +12922,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12885 "configure" +#line 12925 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12988,7 +13028,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12991 "configure" +#line 13031 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/mcore/ChangeLog b/sim/mcore/ChangeLog index 92d66f1..b0b0654 100644 --- a/sim/mcore/ChangeLog +++ b/sim/mcore/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/mcore/configure b/sim/mcore/configure index e5a07c0..692cd90 100755 --- a/sim/mcore/configure +++ b/sim/mcore/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8648,6 +8649,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12064,16 +12114,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12190,7 +12230,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12879,7 +12919,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12882 "configure" +#line 12922 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12985,7 +13025,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12988 "configure" +#line 13028 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/microblaze/ChangeLog b/sim/microblaze/ChangeLog index 19de0a3..793e46c 100644 --- a/sim/microblaze/ChangeLog +++ b/sim/microblaze/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/microblaze/configure b/sim/microblaze/configure index e5a07c0..692cd90 100755 --- a/sim/microblaze/configure +++ b/sim/microblaze/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8648,6 +8649,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12064,16 +12114,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12190,7 +12230,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12879,7 +12919,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12882 "configure" +#line 12922 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12985,7 +13025,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12988 "configure" +#line 13028 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/mips/ChangeLog b/sim/mips/ChangeLog index dc09a5d..17d5ab7 100644 --- a/sim/mips/ChangeLog +++ b/sim/mips/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/mips/configure b/sim/mips/configure index ec780b6..7180ced 100755 --- a/sim/mips/configure +++ b/sim/mips/configure @@ -691,6 +691,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8681,6 +8682,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12097,16 +12147,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12223,7 +12263,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12912,7 +12952,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12915 "configure" +#line 12955 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13018,7 +13058,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 13021 "configure" +#line 13061 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -14074,7 +14114,7 @@ if test ${sim_gen} = MULTI; then cat << __EOF__ > multi-run.c /* Main entry point for MULTI simulators. - Copyright (C) 2003-2020 Free Software Foundation, Inc. + Copyright (C) 2003-2021 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/sim/mn10300/ChangeLog b/sim/mn10300/ChangeLog index c7e1529..8f3c111 100644 --- a/sim/mn10300/ChangeLog +++ b/sim/mn10300/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/mn10300/configure b/sim/mn10300/configure index a218bbb..b8d3566 100755 --- a/sim/mn10300/configure +++ b/sim/mn10300/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8657,6 +8658,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12073,16 +12123,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12199,7 +12239,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12888,7 +12928,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12891 "configure" +#line 12931 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12994,7 +13034,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12997 "configure" +#line 13037 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/moxie/ChangeLog b/sim/moxie/ChangeLog index a12f351..8e1b1ab 100644 --- a/sim/moxie/ChangeLog +++ b/sim/moxie/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/moxie/configure b/sim/moxie/configure index 19dd287..598d654 100755 --- a/sim/moxie/configure +++ b/sim/moxie/configure @@ -679,6 +679,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8649,6 +8650,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12065,16 +12115,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12191,7 +12231,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12880,7 +12920,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12883 "configure" +#line 12923 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12986,7 +13026,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12989 "configure" +#line 13029 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/msp430/ChangeLog b/sim/msp430/ChangeLog index 711e661..bc5a1e8 100644 --- a/sim/msp430/ChangeLog +++ b/sim/msp430/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/msp430/configure b/sim/msp430/configure index 9b37264..e6f5128 100755 --- a/sim/msp430/configure +++ b/sim/msp430/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8648,6 +8649,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12064,16 +12114,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12190,7 +12230,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12879,7 +12919,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12882 "configure" +#line 12922 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12985,7 +13025,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12988 "configure" +#line 13028 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/or1k/ChangeLog b/sim/or1k/ChangeLog index c4b1032..7c62b64 100644 --- a/sim/or1k/ChangeLog +++ b/sim/or1k/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2019-06-13 Stafford Horne <shorne@gmail.com> * cpu.c: Regenerate. diff --git a/sim/or1k/configure b/sim/or1k/configure index 59b5ce6..7f0e1c7 100755 --- a/sim/or1k/configure +++ b/sim/or1k/configure @@ -681,6 +681,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8653,6 +8654,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12069,16 +12119,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12195,7 +12235,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12884,7 +12924,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12887 "configure" +#line 12927 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12990,7 +13030,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12993 "configure" +#line 13033 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/pru/ChangeLog b/sim/pru/ChangeLog index 62fbbd3..4bcb118 100644 --- a/sim/pru/ChangeLog +++ b/sim/pru/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/pru/configure b/sim/pru/configure index 99ef833..7cc3478 100755 --- a/sim/pru/configure +++ b/sim/pru/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8648,6 +8649,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12064,16 +12114,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12190,7 +12230,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12879,7 +12919,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12882 "configure" +#line 12922 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12985,7 +13025,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12988 "configure" +#line 13028 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/rl78/ChangeLog b/sim/rl78/ChangeLog index eca85ed..38ec393 100644 --- a/sim/rl78/ChangeLog +++ b/sim/rl78/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/rl78/configure b/sim/rl78/configure index 9926398..b351822 100755 --- a/sim/rl78/configure +++ b/sim/rl78/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8633,6 +8634,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12049,16 +12099,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12175,7 +12215,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12864,7 +12904,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12867 "configure" +#line 12907 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12970,7 +13010,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12973 "configure" +#line 13013 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/rx/ChangeLog b/sim/rx/ChangeLog index 250ed6c..9aa0a96 100644 --- a/sim/rx/ChangeLog +++ b/sim/rx/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/rx/configure b/sim/rx/configure index 82db088..2df9434 100755 --- a/sim/rx/configure +++ b/sim/rx/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8638,6 +8639,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12054,16 +12104,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12180,7 +12220,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12869,7 +12909,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12872 "configure" +#line 12912 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12975,7 +13015,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12978 "configure" +#line 13018 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/sh/ChangeLog b/sim/sh/ChangeLog index 41af60a..124a216 100644 --- a/sim/sh/ChangeLog +++ b/sim/sh/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/sh/configure b/sim/sh/configure index e5a07c0..692cd90 100755 --- a/sim/sh/configure +++ b/sim/sh/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8648,6 +8649,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12064,16 +12114,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12190,7 +12230,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12879,7 +12919,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12882 "configure" +#line 12922 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12985,7 +13025,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12988 "configure" +#line 13028 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/sh64/ChangeLog b/sim/sh64/ChangeLog index 67c7c82..d519292 100644 --- a/sim/sh64/ChangeLog +++ b/sim/sh64/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/sh64/configure b/sim/sh64/configure index 8c5ae41..9ce6dbd 100755 --- a/sim/sh64/configure +++ b/sim/sh64/configure @@ -681,6 +681,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8654,6 +8655,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12070,16 +12120,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12196,7 +12236,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12885,7 +12925,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12888 "configure" +#line 12928 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12991,7 +13031,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12994 "configure" +#line 13034 "configure" #include "confdefs.h" #if HAVE_DLFCN_H diff --git a/sim/v850/ChangeLog b/sim/v850/ChangeLog index 9f354b1..fe9bed9 100644 --- a/sim/v850/ChangeLog +++ b/sim/v850/ChangeLog @@ -1,3 +1,7 @@ +2021-01-08 Mike Frysinger <vapier@gentoo.org> + + * configure: Regenerate. + 2021-01-04 Mike Frysinger <vapier@gentoo.org> * configure: Regenerate. diff --git a/sim/v850/configure b/sim/v850/configure index 75e7831..1067b56 100755 --- a/sim/v850/configure +++ b/sim/v850/configure @@ -678,6 +678,7 @@ CCDEPMODE DEPDIR am__leading_dot PACKAGE +C_DIALECT RANLIB AR HDEFINES @@ -8654,6 +8655,55 @@ else fi +# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using +# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands +# is C99. So handle it ourselves. +: +C_DIALECT= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5 +$as_echo_n "checking whether C11 is supported by default... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5 +$as_echo_n "checking for -std=c11 support... " >&6; } + ac_save_CC="$CC" + CC="$CC -std=c11" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "C11 support not found" +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CC="$ac_save_CC" + C_DIALECT="-std=c11" + +else + as_fn_error $? "C11 is required" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Some of the common include files depend on bfd.h, and bfd.h checks # that config.h is included first by testing that the PACKAGE macro # is defined. @@ -12070,16 +12120,6 @@ freebsd* | dragonfly*) esac ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - haiku*) version_type=linux need_lib_prefix=no @@ -12196,7 +12236,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux need_lib_prefix=no need_version=no @@ -12885,7 +12925,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12888 "configure" +#line 12928 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12991,7 +13031,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12994 "configure" +#line 13034 "configure" #include "confdefs.h" #if HAVE_DLFCN_H |