diff options
Diffstat (limited to 'gdb')
-rw-r--r-- | gdb/ChangeLog | 52 | ||||
-rw-r--r-- | gdb/Makefile.in | 10 | ||||
-rw-r--r-- | gdb/common/gdb_termios.h | 78 | ||||
-rw-r--r-- | gdb/common/job-control.c | 23 | ||||
-rwxr-xr-x | gdb/configure | 3 | ||||
-rw-r--r-- | gdb/configure.ac | 3 | ||||
-rwxr-xr-x | gdb/gdbserver/configure | 2 | ||||
-rw-r--r-- | gdb/gdbserver/configure.ac | 2 | ||||
-rw-r--r-- | gdb/gdbserver/remote-utils.c | 33 | ||||
-rw-r--r-- | gdb/inflow.c | 88 | ||||
-rw-r--r-- | gdb/inflow.h | 12 | ||||
-rw-r--r-- | gdb/ser-base.c | 8 | ||||
-rw-r--r-- | gdb/ser-base.h | 3 | ||||
-rw-r--r-- | gdb/ser-event.c | 1 | ||||
-rw-r--r-- | gdb/ser-go32.c | 12 | ||||
-rw-r--r-- | gdb/ser-mingw.c | 4 | ||||
-rw-r--r-- | gdb/ser-pipe.c | 1 | ||||
-rw-r--r-- | gdb/ser-tcp.c | 1 | ||||
-rw-r--r-- | gdb/ser-unix.c | 264 | ||||
-rw-r--r-- | gdb/serial.c | 8 | ||||
-rw-r--r-- | gdb/serial.h | 12 | ||||
-rw-r--r-- | gdb/testsuite/ChangeLog | 8 |
22 files changed, 104 insertions, 524 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 58cb4eb..ba45ff4 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,55 @@ +2017-11-06 Pedro Alves <palves@redhat.com> + + * Makefile.in (SER_HARDWIRE): Update comment. + (HFILES_NO_SRCDIR): Remove gdb_termios.h. + * common/gdb_termios.h: Delete file. + * common/job-control.c: Include termios.h and unistd.h instead of + gdb_termios.h. + (gdb_setpgid): Remove HAVE_TERMIOS || TIOCGPGRP preprocessor + check. + (have_job_control): Check HAVE_TERMIOS_H instead of HAVE_TERMIOS. + Remove sgtty code. + * configure.ac: No longer check for termio.h and sgtty.h. + * configure: Regenerate. + * inflow.c: Include termios.h instead of gdb_termios.h. Replace + PROCESS_GROUP_TYPE checks with HAVE_TERMIOS_H checks throughout. + Replace PROCESS_GROUP_TYPE references with pid_t references + throughout. + (gdb_getpgrp): Delete. + (set_initial_gdb_ttystate): Use tcgetpgrp instead of gdb_getpgrp. + (child_terminal_inferior): Remove comment. Remove sgtty code. + (child_terminal_ours_1): Use tcgetpgrp directly instead of + gdb_getpgrp. Use serial_set_tty_state instead aof + serial_noflush_set_tty_state. Remove sgtty code. + * inflow.h: Include unistd.h instead of gdb_termios.h. Replace + PROCESS_GROUP_TYPE check with HAVE_TERMIOS_H check. + (inferior_process_group): Now returns pid_t. + * ser-base.c (ser_base_noflush_set_tty_state): Delete. + * ser-base.h (ser_base_noflush_set_tty_state): Delete. + * ser-event.c (serial_event_ops): Update. + * ser-go32.c (dos_noflush_set_tty_state): Delete. + (dos_ops): Update. + * ser-mingw.c (hardwire_ops, tty_ops, pipe_ops, tcp_ops): Update. + * ser-pipe.c (pipe_ops): Update. + * ser-tcp.c (tcp_ops): Update. + * ser-unix.c: Include termios.h instead of gdb_termios.h. Remove + HAVE_TERMIOS checks. + [HAVE_TERMIO] (struct hardwire_ttystate): Delete. + [HAVE_SGTTY] (struct hardwire_ttystate): Delete. + (get_tty_state, set_tty_state): Drop termio and sgtty code, and + assume termios. + (hardwire_noflush_set_tty_state): Delete. + (hardwire_print_tty_state, hardwire_drain_output) + (hardwire_flush_output, hardwire_flush_input) + (hardwire_send_break, hardwire_raw, hardwire_setbaudrate) + (hardwire_setstopbits, hardwire_setparity): Drop termio and sgtty + code, and assume termios. + (hardwire_ops): Update. + (_initialize_ser_hardwire): Remove HAVE_TERMIOS check. + * serial.c (serial_noflush_set_tty_state): Delete. + * serial.h (serial_noflush_set_tty_state): Delete. + (serial_ops::noflush_set_tty_state): Delete. + 2017-11-06 Ulrich Weigand <uweigand@de.ibm.com> * Makefile.in (SFILES): Remove doublest.c and dfp.c. diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 84d3493..6fe9b38 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -729,12 +729,9 @@ XMLFILES = \ $(srcdir)/features/traceframe-info.dtd \ $(srcdir)/features/xinclude.dtd -# This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX -# interface to the serial port. Hopefully if get ported to OS/2, VMS, -# etc., then there will be (as part of the C library or perhaps as -# part of libiberty) a POSIX interface. But at least for now the -# host-dependent makefile fragment might need to use something else -# besides ser-unix.o +# Build the ser-*.o files the host supports. This includes ser-unix.o +# for any system that supports a POSIX interface to the serial port. +# See configure.ac. SER_HARDWIRE = @SER_HARDWIRE@ # The `remote' debugging target is supported for most architectures, @@ -1539,7 +1536,6 @@ HFILES_NO_SRCDIR = \ common/gdb_setjmp.h \ common/gdb_signals.h \ common/gdb_sys_time.h \ - common/gdb_termios.h \ common/gdb_vecs.h \ common/gdb_wait.h \ common/common-inferior.h \ diff --git a/gdb/common/gdb_termios.h b/gdb/common/gdb_termios.h deleted file mode 100644 index 1d0544d..0000000 --- a/gdb/common/gdb_termios.h +++ /dev/null @@ -1,78 +0,0 @@ -/* Common terminal interface definitions for GDB and gdbserver. - Copyright (C) 1986-2017 Free Software Foundation, Inc. - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. */ - -#ifndef GDB_TERMIOS_H -#define GDB_TERMIOS_H - -/* If we're using autoconf, it will define HAVE_TERMIOS_H, - HAVE_TERMIO_H and HAVE_SGTTY_H for us. One day we can rewrite - ser-unix.c and inflow.c to inspect those names instead of - HAVE_TERMIOS, HAVE_TERMIO and the implicit HAVE_SGTTY (when neither - HAVE_TERMIOS or HAVE_TERMIO is set). Until then, make sure that - nothing has already defined the one of the names, and do the right - thing. */ - -#if !defined (HAVE_TERMIOS) && !defined(HAVE_TERMIO) && !defined(HAVE_SGTTY) -#if defined(HAVE_TERMIOS_H) -#define HAVE_TERMIOS -#else /* ! defined (HAVE_TERMIOS_H) */ -#if defined(HAVE_TERMIO_H) -#define HAVE_TERMIO -#else /* ! defined (HAVE_TERMIO_H) */ -#if defined(HAVE_SGTTY_H) -#define HAVE_SGTTY -#endif /* ! defined (HAVE_SGTTY_H) */ -#endif /* ! defined (HAVE_TERMIO_H) */ -#endif /* ! defined (HAVE_TERMIOS_H) */ -#endif /* !defined (HAVE_TERMIOS) && !defined (HAVE_TERMIO) && - !defined (HAVE_SGTTY) */ - -#if defined(HAVE_TERMIOS) -#include <termios.h> -#endif - -#if !defined(_WIN32) && !defined (HAVE_TERMIOS) - -/* Define a common set of macros -- BSD based -- and redefine whatever - the system offers to make it look like that. FIXME: serial.h and - ser-*.c deal with this in a much cleaner fashion; as soon as stuff - is converted to use them, can get rid of this crap. */ - -#ifdef HAVE_TERMIO - -#include <termio.h> - -#undef TIOCGETP -#define TIOCGETP TCGETA -#undef TIOCSETN -#define TIOCSETN TCSETA -#undef TIOCSETP -#define TIOCSETP TCSETAF -#define TERMINAL struct termio - -#else /* sgtty */ - -#include <fcntl.h> -#include <sgtty.h> -#include <sys/ioctl.h> -#define TERMINAL struct sgttyb - -#endif /* sgtty */ -#endif - -#endif /* ! GDB_TERMIOS_H */ diff --git a/gdb/common/job-control.c b/gdb/common/job-control.c index d76bc57..78fc672 100644 --- a/gdb/common/job-control.c +++ b/gdb/common/job-control.c @@ -20,7 +20,10 @@ #include "common-defs.h" #include "job-control.h" -#include "gdb_termios.h" +#ifdef HAVE_TERMIOS_H +#include <termios.h> +#endif +#include <unistd.h> /* Nonzero if we have job control. */ int job_control; @@ -41,7 +44,6 @@ gdb_setpgid () if (job_control) { -#if defined (HAVE_TERMIOS) || defined (TIOCGPGRP) #ifdef HAVE_SETPGID /* The call setpgid (0, 0) is supposed to work and mean the same thing as this, but on Ultrix 4.2A it fails with EPERM (and @@ -56,7 +58,6 @@ gdb_setpgid () #endif #endif /* HAVE_SETPGRP */ #endif /* HAVE_SETPGID */ -#endif /* defined (HAVE_TERMIOS) || defined (TIOCGPGRP) */ } return retval; @@ -67,9 +68,9 @@ gdb_setpgid () void have_job_control () { - /* OK, figure out whether we have job control. If neither termios nor - sgtty (i.e. termio or go32), leave job_control 0. */ -#if defined (HAVE_TERMIOS) + /* OK, figure out whether we have job control. If termios is not + available, leave job_control 0. */ +#if defined (HAVE_TERMIOS_H) /* Do all systems with termios have the POSIX way of identifying job control? I hope so. */ #ifdef _POSIX_JOB_CONTROL @@ -81,13 +82,5 @@ have_job_control () job_control = 0; /* Have to assume the worst. */ #endif /* _SC_JOB_CONTROL */ #endif /* _POSIX_JOB_CONTROL */ -#endif /* HAVE_TERMIOS */ - -#ifdef HAVE_SGTTY -#ifdef TIOCGPGRP - job_control = 1; -#else - job_control = 0; -#endif /* TIOCGPGRP */ -#endif /* sgtty */ +#endif /* HAVE_TERMIOS_H */ } diff --git a/gdb/configure b/gdb/configure index 6b445e4..c638652 100755 --- a/gdb/configure +++ b/gdb/configure @@ -11554,8 +11554,7 @@ for ac_header in nlist.h machine/reg.h poll.h sys/poll.h proc_service.h \ sys/file.h sys/filio.h sys/ioctl.h sys/param.h \ sys/resource.h sys/procfs.h sys/ptrace.h ptrace.h \ sys/reg.h sys/debugreg.h sys/select.h sys/syscall.h \ - termios.h termio.h \ - sgtty.h elf_hp.h \ + termios.h elf_hp.h \ dlfcn.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` diff --git a/gdb/configure.ac b/gdb/configure.ac index 4e64c80..b909217 100644 --- a/gdb/configure.ac +++ b/gdb/configure.ac @@ -1298,8 +1298,7 @@ AC_CHECK_HEADERS([nlist.h machine/reg.h poll.h sys/poll.h proc_service.h \ sys/file.h sys/filio.h sys/ioctl.h sys/param.h \ sys/resource.h sys/procfs.h sys/ptrace.h ptrace.h \ sys/reg.h sys/debugreg.h sys/select.h sys/syscall.h \ - termios.h termio.h \ - sgtty.h elf_hp.h \ + termios.h elf_hp.h \ dlfcn.h]) AC_CHECK_HEADERS(sys/proc.h, [], [], [#if HAVE_SYS_PARAM_H diff --git a/gdb/gdbserver/configure b/gdb/gdbserver/configure index abab163..d5c62fb 100755 --- a/gdb/gdbserver/configure +++ b/gdb/gdbserver/configure @@ -6177,7 +6177,7 @@ $as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cach cd "$ac_popdir" -for ac_header in sgtty.h termio.h termios.h sys/reg.h string.h proc_service.h sys/procfs.h linux/elf.h fcntl.h signal.h sys/file.h sys/ioctl.h netinet/in.h sys/socket.h netdb.h netinet/tcp.h arpa/inet.h +for ac_header in termios.h sys/reg.h string.h proc_service.h sys/procfs.h linux/elf.h fcntl.h signal.h sys/file.h sys/ioctl.h netinet/in.h sys/socket.h netdb.h netinet/tcp.h arpa/inet.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" diff --git a/gdb/gdbserver/configure.ac b/gdb/gdbserver/configure.ac index 60e235d..456d3b3 100644 --- a/gdb/gdbserver/configure.ac +++ b/gdb/gdbserver/configure.ac @@ -96,7 +96,7 @@ ACX_CONFIGURE_DIR(["../gnulib"], ["build-gnulib-gdbserver"], ACX_CONFIGURE_DIR(["../../libiberty"], ["build-libiberty-gdbserver"]) -AC_CHECK_HEADERS(sgtty.h termio.h termios.h sys/reg.h string.h dnl +AC_CHECK_HEADERS(termios.h sys/reg.h string.h dnl proc_service.h sys/procfs.h linux/elf.h dnl fcntl.h signal.h sys/file.h dnl sys/ioctl.h netinet/in.h sys/socket.h netdb.h dnl diff --git a/gdb/gdbserver/remote-utils.c b/gdb/gdbserver/remote-utils.c index 66e0652..54f27f4 100644 --- a/gdb/gdbserver/remote-utils.c +++ b/gdb/gdbserver/remote-utils.c @@ -17,7 +17,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "server.h" -#include "gdb_termios.h" +#if HAVE_TERMIOS_H +#include <termios.h> +#endif #include "target.h" #include "gdbthread.h" #include "tdesc.h" @@ -325,7 +327,7 @@ remote_open (const char *name) if (remote_desc < 0) perror_with_name ("Could not open remote device"); -#ifdef HAVE_TERMIOS +#if HAVE_TERMIOS_H { struct termios termios; tcgetattr (remote_desc, &termios); @@ -342,33 +344,6 @@ remote_open (const char *name) } #endif -#ifdef HAVE_TERMIO - { - struct termio termio; - ioctl (remote_desc, TCGETA, &termio); - - termio.c_iflag = 0; - termio.c_oflag = 0; - termio.c_lflag = 0; - termio.c_cflag &= ~(CSIZE | PARENB); - termio.c_cflag |= CLOCAL | CS8; - termio.c_cc[VMIN] = 1; - termio.c_cc[VTIME] = 0; - - ioctl (remote_desc, TCSETA, &termio); - } -#endif - -#ifdef HAVE_SGTTY - { - struct sgttyb sg; - - ioctl (remote_desc, TIOCGETP, &sg); - sg.sg_flags = RAW; - ioctl (remote_desc, TIOCSETP, &sg); - } -#endif - fprintf (stderr, "Remote debugging using %s\n", name); enable_async_notification (remote_desc); diff --git a/gdb/inflow.c b/gdb/inflow.c index d54b8f8..a96d4fc 100644 --- a/gdb/inflow.c +++ b/gdb/inflow.c @@ -31,7 +31,9 @@ #include "inflow.h" #include "gdbcmd.h" -#include "gdb_termios.h" +#ifdef HAVE_TERMIOS_H +#include <termios.h> +#endif #include "job-control.h" #ifdef HAVE_SYS_IOCTL_H @@ -64,9 +66,9 @@ struct terminal_info it when it resumes. */ serial_ttystate ttystate; -#ifdef PROCESS_GROUP_TYPE +#ifdef HAVE_TERMIOS_H /* Process group. Saved and restored just like ttystate. */ - PROCESS_GROUP_TYPE process_group; + pid_t process_group; #endif /* fcntl flags. Saved and restored just like ttystate. */ @@ -89,11 +91,11 @@ static serial_ttystate initial_gdb_ttystate; static struct terminal_info *get_inflow_inferior_data (struct inferior *); -#ifdef PROCESS_GROUP_TYPE +#ifdef HAVE_TERMIOS_H /* Return the process group of the current inferior. */ -PROCESS_GROUP_TYPE +pid_t inferior_process_group (void) { return get_inflow_inferior_data (current_inferior ())->process_group; @@ -121,25 +123,6 @@ static const char *inferior_thisrun_terminal; int terminal_is_ours; -#ifdef PROCESS_GROUP_TYPE -static PROCESS_GROUP_TYPE -gdb_getpgrp (void) -{ - int process_group = -1; - -#ifdef HAVE_TERMIOS - process_group = tcgetpgrp (0); -#endif -#ifdef HAVE_TERMIO - process_group = getpgrp (); -#endif -#ifdef HAVE_SGTTY - ioctl (0, TIOCGPGRP, &process_group); -#endif - return process_group; -} -#endif - /* See terminal.h. */ void @@ -157,8 +140,8 @@ set_initial_gdb_ttystate (void) #ifdef F_GETFL our_terminal_info.tflags = fcntl (0, F_GETFL, 0); #endif -#ifdef PROCESS_GROUP_TYPE - our_terminal_info.process_group = gdb_getpgrp (); +#ifdef HAVE_TERMIOS_H + our_terminal_info.process_group = tcgetpgrp (0); #endif } } @@ -187,7 +170,7 @@ child_terminal_init_with_pgrp (int pgrp) struct inferior *inf = current_inferior (); struct terminal_info *tinfo = get_inflow_inferior_data (inf); -#ifdef PROCESS_GROUP_TYPE +#ifdef HAVE_TERMIOS_H /* Store the process group even without a terminal as it is used not only to reset the tty foreground process group, but also to interrupt the inferior. */ @@ -224,7 +207,7 @@ gdb_save_tty_state (void) void child_terminal_init (struct target_ops *self) { -#ifdef PROCESS_GROUP_TYPE +#ifdef HAVE_TERMIOS_H /* This is for Lynx, and should be cleaned up by having Lynx be a separate debugging target with a version of target_terminal::init which passes in the process group to a generic routine which does @@ -232,7 +215,7 @@ child_terminal_init (struct target_ops *self) pass in inferior_ptid to the same routine). */ /* We assume INFERIOR_PID is also the child's process group. */ child_terminal_init_with_pgrp (ptid_get_pid (inferior_ptid)); -#endif /* PROCESS_GROUP_TYPE */ +#endif /* HAVE_TERMIOS_H */ } /* Put the inferior's terminal settings into effect. @@ -269,11 +252,7 @@ child_terminal_inferior (struct target_ops *self) OOPSY ("fcntl F_SETFL"); #endif - /* Because we were careful to not change in or out of raw mode in - terminal_ours, we will not change in our out of raw mode with - this call, so we don't flush any input. */ - result = serial_set_tty_state (stdin_serial, - tinfo->ttystate); + result = serial_set_tty_state (stdin_serial, tinfo->ttystate); OOPSY ("setting tty state"); if (!job_control) @@ -298,19 +277,12 @@ child_terminal_inferior (struct target_ops *self) if (job_control) { -#ifdef HAVE_TERMIOS +#ifdef HAVE_TERMIOS_H result = tcsetpgrp (0, tinfo->process_group); if (!inf->attach_flag) OOPSY ("tcsetpgrp"); #endif - -#ifdef HAVE_SGTTY - result = ioctl (0, TIOCSPGRP, &tinfo->process_group); - if (!inf->attach_flag) - OOPSY ("TIOCSPGRP"); -#endif } - } terminal_is_ours = 0; } @@ -388,34 +360,20 @@ child_terminal_ours_1 (int output_only) xfree (tinfo->ttystate); tinfo->ttystate = serial_get_tty_state (stdin_serial); -#ifdef PROCESS_GROUP_TYPE +#ifdef HAVE_TERMIOS_H if (!inf->attach_flag) - /* If setpgrp failed in terminal_inferior, this would give us + /* If tcsetpgrp failed in terminal_inferior, this would give us our process group instead of the inferior's. See terminal_inferior for details. */ - tinfo->process_group = gdb_getpgrp (); + tinfo->process_group = tcgetpgrp (0); #endif - /* Here we used to set ICANON in our ttystate, but I believe this - was an artifact from before when we used readline. Readline sets - the tty state when it needs to. - FIXME-maybe: However, query() expects non-raw mode and doesn't - use readline. Maybe query should use readline (on the other hand, - this only matters for HAVE_SGTTY, not termio or termios, I think). */ - - /* Set tty state to our_ttystate. We don't change in our out of raw - mode, to avoid flushing input. We need to do the same thing - regardless of output_only, because we don't have separate - terminal_is_ours and terminal_is_ours_for_output flags. It's OK, - though, since readline will deal with raw mode when/if it needs - to. */ - - serial_noflush_set_tty_state (stdin_serial, our_terminal_info.ttystate, - tinfo->ttystate); + /* Set tty state to our_ttystate. */ + serial_set_tty_state (stdin_serial, our_terminal_info.ttystate); if (job_control) { -#ifdef HAVE_TERMIOS +#ifdef HAVE_TERMIOS_H result = tcsetpgrp (0, our_terminal_info.process_group); #if 0 /* This fails on Ultrix with EINVAL if you run the testsuite @@ -428,10 +386,6 @@ child_terminal_ours_1 (int output_only) safe_strerror (errno)); #endif #endif /* termios */ - -#ifdef HAVE_SGTTY - result = ioctl (0, TIOCSPGRP, &our_terminal_info.process_group); -#endif } #ifdef SIGTTOU @@ -616,7 +570,7 @@ child_terminal_info (struct target_ops *self, const char *args, int from_tty) printf_filtered ("\n"); } -#ifdef PROCESS_GROUP_TYPE +#ifdef HAVE_TERMIOS_H printf_filtered ("Process group = %d\n", (int) tinfo->process_group); #endif diff --git a/gdb/inflow.h b/gdb/inflow.h index 428aed4..0b00c61 100644 --- a/gdb/inflow.h +++ b/gdb/inflow.h @@ -20,17 +20,11 @@ #ifndef INFLOW_H #define INFLOW_H -#include "gdb_termios.h" +#include <unistd.h> -#ifdef HAVE_TERMIOS -# define PROCESS_GROUP_TYPE pid_t -#elif defined (HAVE_TERMIO) || defined (HAVE_SGTTY) -# define PROCESS_GROUP_TYPE int -#endif - -#ifdef PROCESS_GROUP_TYPE /* Process group of the current inferior. */ -extern PROCESS_GROUP_TYPE inferior_process_group (void); +#ifdef HAVE_TERMIOS_H +extern pid_t inferior_process_group (void); #endif #endif /* inflow.h */ diff --git a/gdb/ser-base.c b/gdb/ser-base.c index 2bfe82b..3262dcc 100644 --- a/gdb/ser-base.c +++ b/gdb/ser-base.c @@ -551,14 +551,6 @@ ser_base_set_tty_state (struct serial *scb, serial_ttystate ttystate) return 0; } -int -ser_base_noflush_set_tty_state (struct serial *scb, - serial_ttystate new_ttystate, - serial_ttystate old_ttystate) -{ - return 0; -} - void ser_base_print_tty_state (struct serial *scb, serial_ttystate ttystate, diff --git a/gdb/ser-base.h b/gdb/ser-base.h index 964d640..ceeb7de 100644 --- a/gdb/ser-base.h +++ b/gdb/ser-base.h @@ -40,9 +40,6 @@ extern int ser_base_set_tty_state (struct serial *scb, extern void ser_base_print_tty_state (struct serial *scb, serial_ttystate ttystate, struct ui_file *stream); -extern int ser_base_noflush_set_tty_state (struct serial *scb, - serial_ttystate new_ttystate, - serial_ttystate old_ttystate); extern int ser_base_setbaudrate (struct serial *scb, int rate); extern int ser_base_setstopbits (struct serial *scb, int num); extern int ser_base_setparity (struct serial *scb, int parity); diff --git a/gdb/ser-event.c b/gdb/ser-event.c index 08b56a3..8b88ca0 100644 --- a/gdb/ser-event.c +++ b/gdb/ser-event.c @@ -144,7 +144,6 @@ static const struct serial_ops serial_event_ops = NULL, /* copy_tty_state */ NULL, /* set_tty_state */ NULL, /* print_tty_state */ - NULL, /* noflush_set_tty_state */ NULL, /* setbaudrate */ NULL, /* setstopbits */ NULL, /* setparity */ diff --git a/gdb/ser-go32.c b/gdb/ser-go32.c index e352895..6965f19 100644 --- a/gdb/ser-go32.c +++ b/gdb/ser-go32.c @@ -689,17 +689,6 @@ dos_set_tty_state (struct serial *scb, serial_ttystate ttystate) } static int -dos_noflush_set_tty_state (struct serial *scb, serial_ttystate new_ttystate, - serial_ttystate old_ttystate) -{ - struct dos_ttystate *state; - - state = (struct dos_ttystate *) new_ttystate; - dos_setbaudrate (scb, state->baudrate); - return 0; -} - -static int dos_flush_input (struct serial *scb) { struct dos_ttystate *port = &ports[scb->fd]; @@ -882,7 +871,6 @@ static const struct serial_ops dos_ops = dos_copy_tty_state, dos_set_tty_state, dos_print_tty_state, - dos_noflush_set_tty_state, dos_setbaudrate, dos_setstopbits, dos_setparity, diff --git a/gdb/ser-mingw.c b/gdb/ser-mingw.c index 33e4df3..2359a49 100644 --- a/gdb/ser-mingw.c +++ b/gdb/ser-mingw.c @@ -1248,7 +1248,6 @@ static const struct serial_ops hardwire_ops = ser_base_copy_tty_state, ser_base_set_tty_state, ser_base_print_tty_state, - ser_base_noflush_set_tty_state, ser_windows_setbaudrate, ser_windows_setstopbits, ser_windows_setparity, @@ -1279,7 +1278,6 @@ static const struct serial_ops tty_ops = ser_base_copy_tty_state, ser_base_set_tty_state, ser_base_print_tty_state, - ser_base_noflush_set_tty_state, NULL, NULL, NULL, @@ -1310,7 +1308,6 @@ static const struct serial_ops pipe_ops = ser_base_copy_tty_state, ser_base_set_tty_state, ser_base_print_tty_state, - ser_base_noflush_set_tty_state, ser_base_setbaudrate, ser_base_setstopbits, ser_base_setparity, @@ -1341,7 +1338,6 @@ static const struct serial_ops tcp_ops = ser_base_copy_tty_state, ser_base_set_tty_state, ser_base_print_tty_state, - ser_base_noflush_set_tty_state, ser_base_setbaudrate, ser_base_setstopbits, ser_base_setparity, diff --git a/gdb/ser-pipe.c b/gdb/ser-pipe.c index cb94242..56a91fc 100644 --- a/gdb/ser-pipe.c +++ b/gdb/ser-pipe.c @@ -219,7 +219,6 @@ static const struct serial_ops pipe_ops = ser_base_copy_tty_state, ser_base_set_tty_state, ser_base_print_tty_state, - ser_base_noflush_set_tty_state, ser_base_setbaudrate, ser_base_setstopbits, ser_base_setparity, diff --git a/gdb/ser-tcp.c b/gdb/ser-tcp.c index 7ff588b..cc6de30 100644 --- a/gdb/ser-tcp.c +++ b/gdb/ser-tcp.c @@ -399,7 +399,6 @@ static const struct serial_ops tcp_ops = ser_base_copy_tty_state, ser_base_set_tty_state, ser_base_print_tty_state, - ser_base_noflush_set_tty_state, ser_base_setbaudrate, ser_base_setstopbits, ser_base_setparity, diff --git a/gdb/ser-unix.c b/gdb/ser-unix.c index 53c33e6..3cbb77f 100644 --- a/gdb/ser-unix.c +++ b/gdb/ser-unix.c @@ -31,9 +31,7 @@ #include "gdb_select.h" #include "gdbcmd.h" #include "filestuff.h" -#include "gdb_termios.h" - -#ifdef HAVE_TERMIOS +#include <termios.h> struct hardwire_ttystate { @@ -51,32 +49,6 @@ show_serial_hwflow (struct ui_file *file, int from_tty, } #endif -#endif /* termios */ - -#ifdef HAVE_TERMIO - -/* It is believed that all systems which have added job control to SVR3 - (e.g. sco) have also added termios. Even if not, trying to figure out - all the variations (TIOCGPGRP vs. TCGETPGRP, etc.) would be pretty - bewildering. So we don't attempt it. */ - -struct hardwire_ttystate - { - struct termio termio; - }; -#endif /* termio */ - -#ifdef HAVE_SGTTY -struct hardwire_ttystate - { - struct sgttyb sgttyb; - struct tchars tc; - struct ltchars ltc; - /* Line discipline flags. */ - int lmode; - }; -#endif /* sgtty */ - static int hardwire_open (struct serial *scb, const char *name); static void hardwire_raw (struct serial *scb); static int rate_to_code (int rate); @@ -89,8 +61,6 @@ static int set_tty_state (struct serial *scb, struct hardwire_ttystate * state); static serial_ttystate hardwire_get_tty_state (struct serial *scb); static int hardwire_set_tty_state (struct serial *scb, serial_ttystate state); -static int hardwire_noflush_set_tty_state (struct serial *, serial_ttystate, - serial_ttystate); static void hardwire_print_tty_state (struct serial *, serial_ttystate, struct ui_file *); static int hardwire_drain_output (struct serial *); @@ -114,61 +84,19 @@ hardwire_open (struct serial *scb, const char *name) static int get_tty_state (struct serial *scb, struct hardwire_ttystate *state) { -#ifdef HAVE_TERMIOS if (tcgetattr (scb->fd, &state->termios) < 0) return -1; return 0; -#endif - -#ifdef HAVE_TERMIO - if (ioctl (scb->fd, TCGETA, &state->termio) < 0) - return -1; - return 0; -#endif - -#ifdef HAVE_SGTTY - if (ioctl (scb->fd, TIOCGETP, &state->sgttyb) < 0) - return -1; - if (ioctl (scb->fd, TIOCGETC, &state->tc) < 0) - return -1; - if (ioctl (scb->fd, TIOCGLTC, &state->ltc) < 0) - return -1; - if (ioctl (scb->fd, TIOCLGET, &state->lmode) < 0) - return -1; - - return 0; -#endif } static int set_tty_state (struct serial *scb, struct hardwire_ttystate *state) { -#ifdef HAVE_TERMIOS if (tcsetattr (scb->fd, TCSANOW, &state->termios) < 0) return -1; return 0; -#endif - -#ifdef HAVE_TERMIO - if (ioctl (scb->fd, TCSETA, &state->termio) < 0) - return -1; - return 0; -#endif - -#ifdef HAVE_SGTTY - if (ioctl (scb->fd, TIOCSETN, &state->sgttyb) < 0) - return -1; - if (ioctl (scb->fd, TIOCSETC, &state->tc) < 0) - return -1; - if (ioctl (scb->fd, TIOCSLTC, &state->ltc) < 0) - return -1; - if (ioctl (scb->fd, TIOCLSET, &state->lmode) < 0) - return -1; - - return 0; -#endif } static serial_ttystate @@ -205,39 +133,6 @@ hardwire_set_tty_state (struct serial *scb, serial_ttystate ttystate) return set_tty_state (scb, state); } -static int -hardwire_noflush_set_tty_state (struct serial *scb, - serial_ttystate new_ttystate, - serial_ttystate old_ttystate) -{ - struct hardwire_ttystate new_state; -#ifdef HAVE_SGTTY - struct hardwire_ttystate *state = (struct hardwire_ttystate *) old_ttystate; -#endif - - new_state = *(struct hardwire_ttystate *) new_ttystate; - - /* Don't change in or out of raw mode; we don't want to flush input. - termio and termios have no such restriction; for them flushing input - is separate from setting the attributes. */ - -#ifdef HAVE_SGTTY - if (state->sgttyb.sg_flags & RAW) - new_state.sgttyb.sg_flags |= RAW; - else - new_state.sgttyb.sg_flags &= ~RAW; - - /* I'm not sure whether this is necessary; the manpage just mentions - RAW not CBREAK. */ - if (state->sgttyb.sg_flags & CBREAK) - new_state.sgttyb.sg_flags |= CBREAK; - else - new_state.sgttyb.sg_flags &= ~CBREAK; -#endif - - return set_tty_state (scb, &new_state); -} - static void hardwire_print_tty_state (struct serial *scb, serial_ttystate ttystate, @@ -246,7 +141,6 @@ hardwire_print_tty_state (struct serial *scb, struct hardwire_ttystate *state = (struct hardwire_ttystate *) ttystate; int i; -#ifdef HAVE_TERMIOS fprintf_filtered (stream, "c_iflag = 0x%x, c_oflag = 0x%x,\n", (int) state->termios.c_iflag, (int) state->termios.c_oflag); @@ -262,36 +156,6 @@ hardwire_print_tty_state (struct serial *scb, for (i = 0; i < NCCS; i += 1) fprintf_filtered (stream, "0x%x ", state->termios.c_cc[i]); fprintf_filtered (stream, "\n"); -#endif - -#ifdef HAVE_TERMIO - fprintf_filtered (stream, "c_iflag = 0x%x, c_oflag = 0x%x,\n", - state->termio.c_iflag, state->termio.c_oflag); - fprintf_filtered (stream, "c_cflag = 0x%x, c_lflag = 0x%x, c_line = 0x%x.\n", - state->termio.c_cflag, state->termio.c_lflag, - state->termio.c_line); - fprintf_filtered (stream, "c_cc: "); - for (i = 0; i < NCC; i += 1) - fprintf_filtered (stream, "0x%x ", state->termio.c_cc[i]); - fprintf_filtered (stream, "\n"); -#endif - -#ifdef HAVE_SGTTY - fprintf_filtered (stream, "sgttyb.sg_flags = 0x%x.\n", - state->sgttyb.sg_flags); - - fprintf_filtered (stream, "tchars: "); - for (i = 0; i < (int) sizeof (struct tchars); i++) - fprintf_filtered (stream, "0x%x ", ((unsigned char *) &state->tc)[i]); - fprintf_filtered (stream, "\n"); - - fprintf_filtered (stream, "ltchars: "); - for (i = 0; i < (int) sizeof (struct ltchars); i++) - fprintf_filtered (stream, "0x%x ", ((unsigned char *) &state->ltc)[i]); - fprintf_filtered (stream, "\n"); - - fprintf_filtered (stream, "lmode: 0x%x\n", state->lmode); -#endif } /* Wait for the output to drain away, as opposed to flushing @@ -300,48 +164,13 @@ hardwire_print_tty_state (struct serial *scb, static int hardwire_drain_output (struct serial *scb) { -#ifdef HAVE_TERMIOS return tcdrain (scb->fd); -#endif - -#ifdef HAVE_TERMIO - return ioctl (scb->fd, TCSBRK, 1); -#endif - -#ifdef HAVE_SGTTY - /* Get the current state and then restore it using TIOCSETP, - which should cause the output to drain and pending input - to be discarded. */ - { - struct hardwire_ttystate state; - - if (get_tty_state (scb, &state)) - { - return (-1); - } - else - { - return (ioctl (scb->fd, TIOCSETP, &state.sgttyb)); - } - } -#endif } static int hardwire_flush_output (struct serial *scb) { -#ifdef HAVE_TERMIOS return tcflush (scb->fd, TCOFLUSH); -#endif - -#ifdef HAVE_TERMIO - return ioctl (scb->fd, TCFLSH, 1); -#endif - -#ifdef HAVE_SGTTY - /* This flushes both input and output, but we can't do better. */ - return ioctl (scb->fd, TIOCFLUSH, 0); -#endif } static int @@ -349,45 +178,13 @@ hardwire_flush_input (struct serial *scb) { ser_base_flush_input (scb); -#ifdef HAVE_TERMIOS return tcflush (scb->fd, TCIFLUSH); -#endif - -#ifdef HAVE_TERMIO - return ioctl (scb->fd, TCFLSH, 0); -#endif - -#ifdef HAVE_SGTTY - /* This flushes both input and output, but we can't do better. */ - return ioctl (scb->fd, TIOCFLUSH, 0); -#endif } static int hardwire_send_break (struct serial *scb) { -#ifdef HAVE_TERMIOS return tcsendbreak (scb->fd, 0); -#endif - -#ifdef HAVE_TERMIO - return ioctl (scb->fd, TCSBRK, 0); -#endif - -#ifdef HAVE_SGTTY - { - int status; - - status = ioctl (scb->fd, TIOCSBRK, 0); - - /* Can't use usleep; it doesn't exist in BSD 4.2. */ - /* Note that if this gdb_select() is interrupted by a signal it will not - wait the full length of time. I think that is OK. */ - gdb_usleep (250000); - status = ioctl (scb->fd, TIOCCBRK, 0); - return status; - } -#endif } static void @@ -399,7 +196,6 @@ hardwire_raw (struct serial *scb) fprintf_unfiltered (gdb_stderr, "get_tty_state failed: %s\n", safe_strerror (errno)); -#ifdef HAVE_TERMIOS state.termios.c_iflag = 0; state.termios.c_oflag = 0; state.termios.c_lflag = 0; @@ -420,22 +216,6 @@ hardwire_raw (struct serial *scb) #endif state.termios.c_cc[VMIN] = 0; state.termios.c_cc[VTIME] = 0; -#endif - -#ifdef HAVE_TERMIO - state.termio.c_iflag = 0; - state.termio.c_oflag = 0; - state.termio.c_lflag = 0; - state.termio.c_cflag &= ~CSIZE; - state.termio.c_cflag |= CLOCAL | CS8; - state.termio.c_cc[VMIN] = 0; - state.termio.c_cc[VTIME] = 0; -#endif - -#ifdef HAVE_SGTTY - state.sgttyb.sg_flags |= RAW | ANYP; - state.sgttyb.sg_flags &= ~(CBREAK | ECHO); -#endif if (set_tty_state (scb, &state)) fprintf_unfiltered (gdb_stderr, "set_tty_state failed: %s\n", @@ -604,24 +384,8 @@ hardwire_setbaudrate (struct serial *scb, int rate) if (get_tty_state (scb, &state)) return -1; -#ifdef HAVE_TERMIOS cfsetospeed (&state.termios, baud_code); cfsetispeed (&state.termios, baud_code); -#endif - -#ifdef HAVE_TERMIO -#ifndef CIBAUD -#define CIBAUD CBAUD -#endif - - state.termio.c_cflag &= ~(CBAUD | CIBAUD); - state.termio.c_cflag |= baud_code; -#endif - -#ifdef HAVE_SGTTY - state.sgttyb.sg_ispeed = baud_code; - state.sgttyb.sg_ospeed = baud_code; -#endif return set_tty_state (scb, &state); } @@ -648,23 +412,10 @@ hardwire_setstopbits (struct serial *scb, int num) return 1; } -#ifdef HAVE_TERMIOS if (!newbit) state.termios.c_cflag &= ~CSTOPB; else state.termios.c_cflag |= CSTOPB; /* two bits */ -#endif - -#ifdef HAVE_TERMIO - if (!newbit) - state.termio.c_cflag &= ~CSTOPB; - else - state.termio.c_cflag |= CSTOPB; /* two bits */ -#endif - -#ifdef HAVE_SGTTY - return 0; /* sgtty doesn't support this */ -#endif return set_tty_state (scb, &state); } @@ -697,19 +448,9 @@ hardwire_setparity (struct serial *scb, int parity) return -1; } -#ifdef HAVE_TERMIOS state.termios.c_cflag &= ~(PARENB | PARODD); state.termios.c_cflag |= newparity; -#endif -#ifdef HAVE_TERMIO - state.termio.c_cflag &= ~(PARENB | PARODD); - state.termio.c_cflag |= newparity; -#endif - -#ifdef HAVE_SGTTY - return 0; /* sgtty doesn't support this */ -#endif return set_tty_state (scb, &state); } @@ -744,7 +485,6 @@ static const struct serial_ops hardwire_ops = hardwire_copy_tty_state, hardwire_set_tty_state, hardwire_print_tty_state, - hardwire_noflush_set_tty_state, hardwire_setbaudrate, hardwire_setstopbits, hardwire_setparity, @@ -759,7 +499,6 @@ _initialize_ser_hardwire (void) { serial_add_interface (&hardwire_ops); -#ifdef HAVE_TERMIOS #ifdef CRTSCTS add_setshow_boolean_cmd ("remoteflow", no_class, &serial_hwflow, _("\ @@ -771,7 +510,6 @@ when debugging using remote targets."), show_serial_hwflow, &setlist, &showlist); #endif -#endif } int diff --git a/gdb/serial.c b/gdb/serial.c index 6866549..32d4f5a 100644 --- a/gdb/serial.c +++ b/gdb/serial.c @@ -514,14 +514,6 @@ serial_print_tty_state (struct serial *scb, } int -serial_noflush_set_tty_state (struct serial *scb, - serial_ttystate new_ttystate, - serial_ttystate old_ttystate) -{ - return scb->ops->noflush_set_tty_state (scb, new_ttystate, old_ttystate); -} - -int serial_setbaudrate (struct serial *scb, int rate) { return scb->ops->setbaudrate (scb, rate); diff --git a/gdb/serial.h b/gdb/serial.h index c76ddbe..647eab3 100644 --- a/gdb/serial.h +++ b/gdb/serial.h @@ -169,16 +169,6 @@ extern void serial_print_tty_state (struct serial *scb, serial_ttystate ttystate, struct ui_file *); -/* Set the tty state to NEW_TTYSTATE, where OLD_TTYSTATE is the - current state (generally obtained from a recent call to - serial_get_tty_state()), but be careful not to discard any input. - This means that we never switch in or out of raw mode, even if - NEW_TTYSTATE specifies a switch. */ - -extern int serial_noflush_set_tty_state (struct serial *scb, - serial_ttystate new_ttystate, - serial_ttystate old_ttystate); - /* Set the baudrate to the decimal value supplied. Returns 0 for success, -1 for failure. */ @@ -276,8 +266,6 @@ struct serial_ops int (*set_tty_state) (struct serial *, serial_ttystate); void (*print_tty_state) (struct serial *, serial_ttystate, struct ui_file *); - int (*noflush_set_tty_state) (struct serial *, serial_ttystate, - serial_ttystate); int (*setbaudrate) (struct serial *, int rate); int (*setstopbits) (struct serial *, int num); /* Set the value PARITY as parity setting for serial object. diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 158fea4..fce9deb 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,11 @@ +2017-11-06 Pedro Alves <palves@redhat.com> + + * configure.ac: No longer check for termio.h and sgtty.h. + * configure: Regenerate. + * remote-utils.c: Include termios.h instead of gdb_termios.h. + (remote_open): Check HAVE_TERMIOS_H instead of HAVE_TERMIOS. + Remove termio and sgtty code. + 2017-11-03 Yao Qi <yao.qi@linaro.org> * gdb.mi/list-thread-groups-available.exp: Skip it if XML parsing |