aboutsummaryrefslogtreecommitdiff
path: root/gdb/serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'gdb/serial.c')
-rw-r--r--gdb/serial.c98
1 files changed, 47 insertions, 51 deletions
diff --git a/gdb/serial.c b/gdb/serial.c
index 8a8bab4..83a71b0 100644
--- a/gdb/serial.c
+++ b/gdb/serial.c
@@ -42,15 +42,14 @@ static std::string serial_logfile;
static struct ui_file *serial_logfp = NULL;
static const struct serial_ops *serial_interface_lookup (const char *);
-static void serial_logchar (struct ui_file *stream,
- int ch_type, int ch, int timeout);
+static void serial_logchar (struct ui_file *stream, int ch_type, int ch,
+ int timeout);
static const char logbase_hex[] = "hex";
static const char logbase_octal[] = "octal";
static const char logbase_ascii[] = "ascii";
-static const char *const logbase_enums[] =
-{logbase_hex, logbase_octal, logbase_ascii, NULL};
+static const char *const logbase_enums[]
+ = { logbase_hex, logbase_octal, logbase_ascii, NULL };
static const char *serial_logbase = logbase_ascii;
-
static int serial_current_type = 0;
@@ -116,8 +115,7 @@ serial_logchar (struct ui_file *stream, int ch_type, int ch, int timeout)
gdb_puts ("\\v", stream);
break;
default:
- gdb_printf (stream,
- isprint (ch) ? "%c" : "\\x%02x", ch & 0xFF);
+ gdb_printf (stream, isprint (ch) ? "%c" : "\\x%02x", ch & 0xFF);
break;
}
}
@@ -139,7 +137,6 @@ serial_log_command (struct target_ops *self, const char *cmd)
gdb_flush (serial_logfp);
}
-
static const struct serial_ops *
serial_interface_lookup (const char *name)
{
@@ -387,7 +384,7 @@ serial_readchar (struct serial *scb, int timeout)
/* FIXME: cagney/1999-10-11: Don't enable this check until the ASYNC
code is finished. */
if (0 && serial_is_async_p (scb) && timeout < 0)
- internal_error (_("serial_readchar: blocking read in async mode"));
+ internal_error (_ ("serial_readchar: blocking read in async mode"));
ch = scb->ops->readchar (scb, timeout);
if (serial_logfp != NULL)
@@ -505,8 +502,7 @@ serial_set_tty_state (struct serial *scb, serial_ttystate ttystate)
}
void
-serial_print_tty_state (struct serial *scb,
- serial_ttystate ttystate,
+serial_print_tty_state (struct serial *scb, serial_ttystate ttystate,
struct ui_file *stream)
{
scb->ops->print_tty_state (scb, ttystate, stream);
@@ -545,9 +541,7 @@ serial_is_async_p (struct serial *scb)
}
void
-serial_async (struct serial *scb,
- serial_event_ftype *handler,
- void *context)
+serial_async (struct serial *scb, serial_event_ftype *handler, void *context)
{
int changed = ((scb->async_handler == NULL) != (handler == NULL));
@@ -625,8 +619,7 @@ static void
serial_baud_show_cmd (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- gdb_printf (file, _("Baud rate for remote serial I/O is %s.\n"),
- value);
+ gdb_printf (file, _ ("Baud rate for remote serial I/O is %s.\n"), value);
}
/* See serial.h. */
@@ -636,8 +629,8 @@ int serial_parity = GDBPARITY_NONE;
static const char parity_none[] = "none";
static const char parity_odd[] = "odd";
static const char parity_even[] = "even";
-static const char *const parity_enums[] =
- {parity_none, parity_odd, parity_even, NULL};
+static const char *const parity_enums[]
+ = { parity_none, parity_odd, parity_even, NULL };
static const char *parity = parity_none;
/* Set serial_parity value. */
@@ -654,6 +647,7 @@ set_parity (const char *ignore_args, int from_tty, struct cmd_list_element *c)
}
void _initialize_serial ();
+
void
_initialize_serial ()
{
@@ -663,54 +657,56 @@ Connect the terminal directly up to the command monitor.\n\
Use <CR>~. or <CR>~^D to break out."));
#endif /* 0 */
- add_setshow_prefix_cmd ("serial", class_maintenance,
- _("Set default serial/parallel port configuration."),
- _("Show default serial/parallel port configuration."),
- &serial_set_cmdlist, &serial_show_cmdlist,
- &setlist, &showlist);
+ add_setshow_prefix_cmd (
+ "serial", class_maintenance,
+ _ ("Set default serial/parallel port configuration."),
+ _ ("Show default serial/parallel port configuration."),
+ &serial_set_cmdlist, &serial_show_cmdlist, &setlist, &showlist);
/* If target is open when baud changes, it doesn't take effect until
the next open (I think, not sure). */
- add_setshow_zinteger_cmd ("baud", no_class, &baud_rate, _("\
-Set baud rate for remote serial I/O."), _("\
-Show baud rate for remote serial I/O."), _("\
+ add_setshow_zinteger_cmd ("baud", no_class, &baud_rate, _ ("\
+Set baud rate for remote serial I/O."),
+ _ ("\
+Show baud rate for remote serial I/O."),
+ _ ("\
This value is used to set the speed of the serial port when debugging\n\
using remote targets."),
- NULL,
- serial_baud_show_cmd,
- &serial_set_cmdlist, &serial_show_cmdlist);
-
- add_setshow_enum_cmd ("parity", no_class, parity_enums,
- &parity, _("\
-Set parity for remote serial I/O."), _("\
-Show parity for remote serial I/O."), NULL,
- set_parity,
- NULL, /* FIXME: i18n: */
+ NULL, serial_baud_show_cmd, &serial_set_cmdlist,
+ &serial_show_cmdlist);
+
+ add_setshow_enum_cmd ("parity", no_class, parity_enums, &parity, _ ("\
+Set parity for remote serial I/O."),
+ _ ("\
+Show parity for remote serial I/O."),
+ NULL, set_parity, NULL, /* FIXME: i18n: */
&serial_set_cmdlist, &serial_show_cmdlist);
- add_setshow_filename_cmd ("remotelogfile", no_class, &serial_logfile, _("\
-Set filename for remote session recording."), _("\
-Show filename for remote session recording."), _("\
+ add_setshow_filename_cmd ("remotelogfile", no_class, &serial_logfile, _ ("\
+Set filename for remote session recording."),
+ _ ("\
+Show filename for remote session recording."),
+ _ ("\
This file is used to record the remote session for future playback\n\
by gdbserver."),
- NULL,
- NULL, /* FIXME: i18n: */
+ NULL, NULL, /* FIXME: i18n: */
&setlist, &showlist);
add_setshow_enum_cmd ("remotelogbase", no_class, logbase_enums,
- &serial_logbase, _("\
-Set numerical base for remote session logging."), _("\
-Show numerical base for remote session logging."), NULL,
- NULL,
- NULL, /* FIXME: i18n: */
+ &serial_logbase, _ ("\
+Set numerical base for remote session logging."),
+ _ ("\
+Show numerical base for remote session logging."),
+ NULL, NULL, NULL, /* FIXME: i18n: */
&setlist, &showlist);
add_setshow_zuinteger_cmd ("serial", class_maintenance,
- &global_serial_debug_p, _("\
-Set serial debugging."), _("\
-Show serial debugging."), _("\
+ &global_serial_debug_p, _ ("\
+Set serial debugging."),
+ _ ("\
+Show serial debugging."),
+ _ ("\
When non-zero, serial port debugging is enabled."),
- NULL,
- NULL, /* FIXME: i18n: */
+ NULL, NULL, /* FIXME: i18n: */
&setdebuglist, &showdebuglist);
}
generated by cgit v1.1 at 2024-10-13 02:55:29 +0000