diff options
Diffstat (limited to 'gdb/Makefile.in')
| -rw-r--r-- | gdb/Makefile.in | 506 |
1 files changed, 506 insertions, 0 deletions
diff --git a/gdb/Makefile.in b/gdb/Makefile.in new file mode 100644 index 0000000..7b4e3ce --- /dev/null +++ b/gdb/Makefile.in @@ -0,0 +1,506 @@ +##Copyright (C) 1989-1991 Free Software Foundation, Inc. + +# This file is part of GDB. + +# GDB is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 1, or (at your option) +# any later version. + +# GDB is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with GDB; see the file COPYING. If not, write to +# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + +# Place to install binaries. +bindir=/usr/local/bin + +# System V: If you compile gdb with a compiler which uses the coff +# encapsulation feature (this is a function of the compiler used, NOT +# of the m-?.h file selected by config.gdb), you must make sure that +# the GNU nm is the one that is used by munch. + +# If you are compiling with GCC, make sure that either 1) You use the +# -traditional flag, or 2) You have the fixed include files where GCC +# can reach them. Otherwise the ioctl calls in inflow.c and readline.c +# will be incorrectly compiled. The "fixincludes" script in the gcc +# distribution will fix your include files up. +#CC=cc +#CC=gcc -traditional +GCC=gcc + +VPATH=$(srcdir) + +# It is also possible that you will need to add -I/usr/include/sys to the +# CFLAGS section if your system doesn't have fcntl.h in /usr/include (which +# is where it should be according to Posix). + +YACC=bison -y +# YACC=yacc +SHELL=/bin/sh +MAKE=make + +# Set this up with gcc if you have gnu ld and the loader will print out +# line numbers for undefinded refs. +#CC-LD=gcc -static +CC-LD=${CC} + +# define this to be "gmalloc.o" if you want to use the gnu malloc routine +# (useful for debugging memory allocation problems in gdb). To use your +# system malloc, uncomment the following two lines. +#GNU_MALLOC = +#MALLOC_CFLAGS = -DNO_MALLOC_CHECK +GNU_MALLOC = gmalloc.o mcheck.o +MALLOC_CFLAGS = + +# Where is the "include" directory? Traditionally ../include or ./include +INCLUDE_DIR = ${srcdir}/../include +INCLUDE_DEP = $$(INCLUDE_DIR) + +# Where is the BFD library? Traditionally ../bfd or ./bfd +BFD_DIR = ${srcdir}/../bfd +BFD_DEP = $$(BFD_DIR) + +# All the includes used for CFLAGS and for lint. +# -I. for config files. +# -I${srcdir} for <obstack.h>, possibly regex.h also. +INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) -I${srcdir}/vx-share + +# {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS. +# CFLAGS for both GDB and readline. +GLOBAL_CFLAGS = -g ${TM_CFLAGS} ${XM_CFLAGS} +#PROFILE_CFLAGS = -pg + +CFLAGS = ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS} +# None of the things in CFLAGS will do any harm, and on some systems +# (e.g. SunOS4) it is important to use the M_CFLAGS. +LDFLAGS = $(CFLAGS) + +# define this to be "obstack.o" if you don't have the obstack library installed +# so that the dependencies work right. +OBSTACK = obstack.o + +# Requires GNU getopt_long features. +GETOPT = getopt.o getopt1.o +# Where is the getopt directory? Traditionally ../getopt or ./getopt +GETOPT_DIR = ${srcdir}/../getopt +GETOPT_DEP = $$(GETOPT_DIR) + +# Flags that describe where you can find the termcap library. +# You may need to make other arrangements for USG. +TERMCAP = -ltermcap + +# You must define REGEX and REGEX1 on USG machines. +# If your sysyem is missing alloca(), or, more likely, it's there but +# it doesn't work, define ALLOCA & ALLOCA1 + +# {X,T}M_CLIBS, if defined, has system-dependent libs +# For example, -lPW for System V to get alloca(). +# FIXME STOPGAP FOR BFD LIBRARY: BFD stuff +CLIBS = ${TERMCAP} $(XM_CLIBS) ${TM_CLIBS} ${BFD_DIR}/libbfd.a +CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_DIR}/libbfd.a + +ADD_FILES = ${OBSTACK} ${REGEX} ${ALLOCA} ${GNU_MALLOC} ${GETOPT} +ADD_DEPS = ${OBSTACK} ${REGEX1} ${ALLOCA1} ${GNU_MALLOC} ${GETOPT} + +VERSION = 3.94.2 +DIST=gdb-$(VERSION) + +LINT=/usr/5bin/lint +LINTFLAGS= + +# Source files in the main directory. +# Files which are included via a tconfig/* or xconfig/* file +# should *not* be specified here; they're in "ALLDEPFILES". +SFILES_MAINDIR = \ + blockframe.c breakpoint.c command.c core.c \ + environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \ + main.c printcmd.c \ + remote.c source.c stack.c symmisc.c symtab.c symfile.c \ + utils.c valarith.c valops.c valprint.c values.c expread.y \ + signame.c cplus-dem.c mem-break.c target.c inftarg.c \ + dbxread.c coffread.c \ + ieee-float.c + +# Source files in subdirectories (which will be handled separately by +# 'make gdb.tar.Z'). +# Files which are included via a tconfig/* or xconfig/* file +# should *not* be specified here; they're in "ALLDEPFILES". +SFILES_SUBDIR = \ + ${srcdir}/vx-share/dbgRpcLib.h \ + ${srcdir}/vx-share/ptrace.h \ + ${srcdir}/vx-share/reg.h \ + ${srcdir}/vx-share/vxTypes.h \ + ${srcdir}/vx-share/vxWorks.h \ + ${srcdir}/vx-share/wait.h \ + ${srcdir}/vx-share/xdr_ld.h \ + ${srcdir}/vx-share/xdr_ptrace.h \ + ${srcdir}/vx-share/xdr_rdb.h \ + ${srcdir}/vx-share/xdr_regs.h \ + ${srcdir}/nindy-share/Makefile \ + ${srcdir}/nindy-share/VERSION \ + ${srcdir}/nindy-share/b.out.h \ + ${srcdir}/nindy-share/block_io.h \ + ${srcdir}/nindy-share/coff.h \ + ${srcdir}/nindy-share/demux.h \ + ${srcdir}/nindy-share/env.h \ + ${srcdir}/nindy-share/stop.h \ + ${srcdir}/nindy-share/ttycntl.h + +# All source files that go into linking GDB, except config-specified files. +SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR) + +# All source files that lint should look at +LINTFILES = $(SFILES) expread.tab.c init.c + +# Any additional files specified on these lines should also be added to +# the OTHERS = definition below, so they go in the tar files. +SFILES_STAND = $(SFILES) standalone.c +SFILES_KGDB = $(SFILES) stuff.c kdb-start.c + +# Header files that are not named in tconfig/* or xconfig/* go here. +HFILES= breakpoint.h command.h defs.h environ.h \ + expression.h frame.h gdbcmd.h gdbcore.h \ + getpagesize.h ieee-float.h inferior.h param-no-tm.h param.h \ + signals.h signame.h symfile.h symtab.h \ + target.h tdesc.h terminal.h tm-68k.h tm-i960.h tm-sunos.h \ + value.h + +OPCODES = pn-opcode.h np1-opcode.h sparc-opcode.h vax-opcode.h m68k-opcode.h \ + ns32k-opcode.h convex-opcode.h pyr-opcode.h mips-opcode.h \ + am29k-opcode.h + +REMOTE_EXAMPLES = remote-sa.m68k.shar remote-multi.shar + +MALLOCSRC = gmalloc.c mcheck.c ansidecl.h stdlib.h gmalloc.h stddef.h +GETOPTSRC = $(GETOPT_DIR)/getopt.c $(GETOPT_DIR)/getopt1.c + +POSSLIBS_MAINDIR = obstack.h obstack.c regex.c regex.h alloca.c \ + $(MALLOCSRC) +POSSLIBS = $(POSSLIBS_MAINDIR) $(GETOPTSRC) + +TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c + +# tdesc-lib cannot be named simply tdesc, because if if it were GNU make +# would try to make it from tdesc.c. +# tdesc-lib removed from the list due to Motorola copyrights...gnu@cygnus.com +OTHERS = Makefile.dist depend alldeps.mak Makefile.srcdir \ + createtags munch config.gdb config.status \ + ChangeLog ChangeLog-3.x \ + README TODO TAGS WHATS.NEW \ + gdb.texinfo gdb-int.texinfo gdbrc.tex threecol.tex \ + .gdbinit COPYING expread.tab.c stab.def \ + copying.c Projects Convex.notes copying.awk \ + saber.suppress standalone.c stuff.c kdb-start.c \ + hp-include # tests + +DEPFILES= ${TDEPFILES} ${XDEPFILES} + +SOURCES=$(SFILES) $(ALLDEPFILES) +TAGFILES = $(SOURCES) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS} +TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \ + ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR} +TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES} + +OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \ + values.o eval.o valops.o valarith.o valprint.o printcmd.o \ + symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \ + command.o utils.o expread.o expprint.o environ.o version.o \ + copying.o $(DEPFILES) signame.o cplus-dem.o mem-break.o target.o \ + inftarg.o ieee-float.o \ + dbxread.o coffread.o # mipsread.o + +RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES) + +TSOBS = core.o inflow.o + +NTSOBS = standalone.o + +TSSTART = /lib/crt0.o + +NTSSTART = kdb-start.o + +RL_LIB = readline/libreadline.a +RL_LIB_DEP = $(RL_LIB) + +# Prevent Sun make from putting in the machine type. Setting +# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1. +.c.o: + ${CC} -c ${CFLAGS} $< + +all: gdb + +install: gdb + cp gdb $(bindir)/gdb.new + mv $(bindir)/gdb.new $(bindir)/gdb + $(M_INSTALL) + +init.c: $(srcdir)/munch $(MUNCH_DEFINE) $(OBS) $(TSOBS) + $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c + +gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${RL_LIB_DEP} ${CDEPS} init.o + ${CC-LD} $(LDFLAGS) -o gdb init.o $(OBS) $(TSOBS) $(ADD_FILES) \ + ${RL_LIB} $(CLIBS) + +saber_gdb: $(SFILES) $(GETOPTSRC) $(DEPFILES) copying.c obstack.c version.c + #setopt load_flags $(CFLAGS) -I$(BFD_DIR) + #load ./init.c $(SFILES) + #unload ${srcdir}/expread.y + #load ${srcdir}/expread.tab.c readline/libreadline.a + #load copying.c version.c + #load obstack.c $(GETOPTSRC) + #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'` + #load ${BFD_DIR}/libbfd.a -ltermcap + ##void mcheck(a) void (*a)(); { } + + + +# This is useful when debugging GDB, because some Unix's don't let you run GDB +# on itself without copying the executable. So "make gdb1" will make +# gdb and put a copy in gdb1, and you can run it with "gdb gdb1". +# Removing gdb1 before the copy is the right thing if gdb1 is open +# in another process. +gdb1: gdb + rm -f gdb1 + cp gdb gdb1 + +# This is a remote stub which runs under unix and starts up an +# inferior process. This is at least useful for debugging GDB's +# remote support. +rapp: $(RAPP_OBS) + rm -f rapp_init.c + ${srcdir}/munch ${RAPP_OBS} > rapp_init.c + ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS) + +Makefiles= Makefile.srcdir $(M_MAKEFILE) \ + ${srcdir}/alldeps.mak ${srcdir}/Makefile.dist + +MAKE_MAKEFILE= echo "M_MAKEFILE=$(M_MAKEFILE)" | \ + cat - ${Makefiles} ${srcdir}/depend >Makefile + +Makefile: $(Makefiles) + $(MAKE_MAKEFILE) + +alldeps.mak: ${srcdir}/tconfig ${srcdir}/xconfig + rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp + for i in `ls -d ${srcdir}/tconfig/*[0-9A-Za-z] \ + ${srcdir}/xconfig/*[0-9A-Za-z] | grep -v RCS` ; do \ + echo $$i >>allconfig.tmp; \ + awk <$$i ' \ + $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \ + for (i = 2; i <= NF; i++) \ + print $$i >> "alldeps.tmp" ; \ + } \ + $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \ + print $$2 >> "allparam.tmp" }' ; \ + done + sort <alldeps.tmp | uniq | \ + sed -e 's/arm-convert.o/arm-convert.s/' \ + -e 's!^Onindy.o!nindy-share/Onindy.c!' \ + -e 's!^nindy.o!nindy-share/nindy.c!' \ + -e 's!ttybreak.o!nindy-share/ttybreak.c!' \ + -e 's!ttyflush.o!nindy-share/ttyflush.c!' \ + -e 's!xdr_ld.o!vx-share/xdr_ld.c!' \ + -e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \ + -e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \ + -e 's!xdr_regs.o!vx-share/xdr_regs.c!' \ + -e 's/\.o/.c/' \ + >alldeps2.tmp + echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \ + >>alldeps.mak; + grep -v / alldeps2.tmp | \ + awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \ + NR == 0 {printf $$0;} \ + NR != 0 {printf "\\\n" $$0} \ + END {printf "\n\n"}' >>alldeps.mak; + grep / alldeps2.tmp | \ + awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \ + NR == 0 {printf $$0;} \ + NR != 0 {printf "\\\n" $$0} \ + END {printf "\n\n"}' >>alldeps.mak; + sort <allparam.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \ + NR == 0 {printf $$0;} \ + NR != 0 {printf "\\\n" $$0} \ + END {printf "\n\n"}' >>alldeps.mak; + sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \ + NR == 0 {printf $$0;} \ + NR != 0 {printf "\\\n" $$0} \ + END {printf "\n\n"}' >>alldeps.mak; + rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp + +# The sed script makes everything which depends on {x,t}m.h depend on +# config.status as well, in case someone reconfigures gdb out from +# under an already compiled gdb. +depend: $(SOURCES) Makefile.dist + @echo Ignore errors about non-existent system-supplied include files + @echo for systems other than the one you are using. + @echo "If xm.h and tm.h don't exist, the error messages saying so" + @echo can safely be ignored. + @echo Also ignore parse errors in valops.c, and any errors in + @echo arm-convert.s. + -$(GCC) -MM $(CFLAGS) -I$(BFD_DIR) \ + `ls $(SOURCES) | sort -u` >depend.tmp + <depend.tmp sed -e 's/ [xt]m.h/& config.status/g' \ + -e 's; vx-share/; $${srcdir}/vx-share/;g' \ + -e 's; nindy-share/; $${srcdir}/nindy-share/;g' \ + -e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \ + -e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \ + -e 's; [a-z0-9./]*getopt/; $(GETOPT_DEP)/;g' \ + -e 's; \./; $${srcdir}/;g' \ + >depend + $(MAKE_MAKEFILE) + rm depend.tmp + +config.status: + @echo "You must configure gdb. Look at the README file for details." + @false + +# These are not generated by "make depend" because they only are there +# for some machines. +tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h : tm-68k.h +tm-hp300hpux.h tm-sun2.h tm-3b1.h : tm-68k.h +xm-news1000.h : xm-news.h +xm-i386-sv32.h : xm-i386.h +tm-i386gas.h: tm-i386.h +xm-sun4os4.h : xm-sparc.h +tm-sun4os4.h : tm-sparc.h + +kdb : $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${RL_LIB_DEP} + rm -f init.c + $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c + $(CC) $(LDFLAGS) -c init.c $(CLIBS) + ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \ + ${RL_LIB} -lc $(CLIBS) + +# Put the proper machine-specific files first. +# createtags will edit the .o in DEPFILES into .c +TAGS: ${TAGFILES} + $(srcdir)/createtags $(TM_FILE) ${XM_FILE} $(DEPFILES) ${TAGFILES} +tags: TAGS + +# FIXME: Get alldeps.mak up to date, config.gdb none, THEN make gdb.tar.Z! +gdb.tar.Z: ${TARFILES} + rm -f gdb.tar; rm -rf $(DIST) + cd readline ; make readline.tar + mkdir $(DIST) + cd $(DIST) ; for i in ${TARFILES} ; do ln -s ../$$i . ; done + mkdir $(DIST)/readline + cd $(DIST)/readline ; tar xf ../../readline/readline.tar + mkdir $(DIST)/xconfig ${DIST}/tconfig + cd $(DIST)/tconfig ; \ + for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done + mkdir $(DIST)/vx-share $(DIST)/nindy-share + cd $(DIST)/tconfig ; \ + for i in $(SFILES_SUBDIR) $(ALLDEPFILES_SUBDIR); \ + do ln -s ../../$$i ../$$i ; done + tar chf - $(DIST) | compress >gdb.tar.Z + rm -rf $(DIST) + +clean: + rm -f ${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} + rm -f init.c init.o version.c + rm -f gdb core gdb.tar gdb.tar.Z make.log + rm -f gdb[0-9] + cd readline ; make clean + +distclean: clean expread.tab.c TAGS + rm -f tm.h xm.h config.status + rm -f y.output yacc.acts yacc.tmp + rm -f ${TESTS} Makefile + +realclean: clean + rm -f expread.tab.c TAGS + rm -f tm.h xm.h config.status + rm -f Makefile + +gdb.dvi : gdb.texinfo + tex gdb.texinfo + texindex gdb.?? + tex gdb.texinfo + +# Make copying.c from COPYING +copying.c : COPYING copying.awk + awk -f copying.awk < COPYING > copying.c + +version.c : Makefile.dist + echo 'char *version = "$(VERSION)";' >version.c + +${srcdir}/expread.tab.c : $(srcdir)/expread.y + @echo 'Expect 4 shift/reduce conflict.' + ${YACC} $(srcdir)/expread.y + mv y.tab.c ${srcdir}/expread.tab.c + +expread.o : ${srcdir}/expread.tab.c defs.h param.h symtab.h \ + frame.h expression.h + $(CC) -c ${CFLAGS} `echo ${srcdir}/expread.tab.c | sed 's,^\./,,'` + mv expread.tab.o expread.o + +# dbxread, coffread, mipsread have dependencies on BFD header files. +dbxread.o: ${srcdir}/dbxread.c + ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c + +coffread.o: ${srcdir}/coffread.c + ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c + +mipsread.o: ${srcdir}/mipsread.c + ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c + +# Drag in the files that are in another directory. + +getopt1.o: $(GETOPT_DIR)/getopt1.c + ${CC} -c ${CFLAGS} $(GETOPT_DIR)/getopt1.c + +getopt.o: $(GETOPT_DIR)/getopt.c + ${CC} -c ${CFLAGS} $(GETOPT_DIR)/getopt.c + +xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c + ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ld.c + +xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c + ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c + +xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c + ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_rdb.c + +xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c + ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_regs.c + +nindy.o: ${srcdir}/nindy-share/nindy.c + ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/nindy.c + +Onindy.o: ${srcdir}/nindy-share/Onindy.c + ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/Onindy.c + +ttybreak.o: ${srcdir}/nindy-share/ttybreak.c + ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttybreak.c + +ttyflush.o: ${srcdir}/nindy-share/ttyflush.c + ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttyflush.c + +tdesc-lib/libdc.o : force_update + cd tdesc-lib ; ${MAKE} "SYSV_DEFINE=${SYSV_DEFINE}" + +# In LOCAL_INCLUDES, -I${srcdir} is right if srcdir is an absolute path, +# and -I../${srcdir} is right if it is relative (e.g. ".."), so search both. +readline/libreadline.a : force_update + cd readline ; ${MAKE} "SYSV=${SYSV_DEFINE}"\ + "VPATH=${srcdir}/readline:../${srcdir}/readline"\ + "LOCAL_INCLUDES=-I../ -I${srcdir}/ -I../${srcdir}/"\ + "DEBUG_FLAGS=${GLOBAL_CFLAGS}" "CC=${CC}" libreadline.a + +lint: $(LINTFILES) + $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) + +gdb.cxref: $(SFILES) + cxref -I. $(SFILES) >gdb.cxref + +force_update : + +# When used with GDB, the demangler should never look for leading underscores +# because GDB strips them off during symbol read-in. Thus -Dnounderscore. +cplus-dem.o : cplus-dem.c + ${CC} -c -Dnounderscore `echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'` |