diff options
Diffstat (limited to 'gdb/ChangeLog-98')
| -rw-r--r-- | gdb/ChangeLog-98 | 7435 |
1 files changed, 0 insertions, 7435 deletions
diff --git a/gdb/ChangeLog-98 b/gdb/ChangeLog-98 deleted file mode 100644 index f2ade7e..0000000 --- a/gdb/ChangeLog-98 +++ /dev/null @@ -1,7435 +0,0 @@ -Thu Dec 31 15:26:13 1998 Stan Shebs <shebs@andros.cygnus.com> - - * corelow.c (core_ops): Don't initialize statically. - (init_core_ops): New function, fills in core_ops. - (_initialize_corelow): Use it. - -Thu Dec 31 16:54:30 1998 David Taylor <taylor@texas.cygnus.com> - - The following changes were made by - Elena Zannoni <ezannoni@kwikemart.cygnus.com> - Edith Epstein <eepstein@sophia.cygnus.com> - David Taylor <taylor@texas.cygnus.com> - - * config/pa/tm-hppa.h (INSTRUCTION_NULLIFIED): Change to read - nullify instruction bit from IPSW only when we are not in a system - call. - (STRCAT_REGISTER, pa_do_strcat_registers_info): Additional - parameter -- precision. - - * Makefile.in (BUILD_TUI): To build the tui, only when configured - with --enable-tui. - (YLWRAP): Use ylwrap to avoid problems on systems w/o bison. - (gdb$(EXEEXT)): Make it dependent on BUILD_TUI. - (all-tui): Remove dependency from phony target. - (c-exp.tab.c): Use ylwrap instead of bison. - (jv-exp.tab.c): Ditto. - (f-exp.tab.c): Ditto. - (m2-exp.tab.c): Ditto. - - * configure.in (ENABLE_CFLAGS): Define and export BUILD_TUI. - - * configure: Regenerated. - - * c-typeprint.c (c_type_print_base): Get to the method name by - skipping over all the namespaces, classes and '::'. - - * infcmd.c (run_command): Only call SOLIB_RESTART if it's - defined. - (detach_command): Ditto. - - * infptrace.c (call_ptrace): Add some debugging code. - - * infrun.c (follow_inferior_fork): Only define on HP. - (wait_for_inferior): Only call SOLIB_IN_DYNAMIC_LINKER if we have - shared libraries; restore test of IN_SOLIB_DYNSYM_RESOLVE_CODE - removed by HP. - - * Makefile.in (ALLDEPFILES): Add somread.c, hp-psymtab-read.c, - hp-symtab-read.c. - (SFILES): Remove the above files - (COMMON_OBS): Remove somread.o - (SFILES): Add the tui files to this, so they get - included in etags tables. - (all-tui): New rule, which does a recursive make in the tui - subdir. - (gdb$(EXEEXT)): Add tui-all to the list of - dependencies, and add tui/libtui.a to the link list. - (tui/libtui.a): When recursing, pass down - ${FLAGS_TO_PASS}. And don't echo the make command. This is - closer to what the other recursions do. - (HFILES_NO_SRCDIR) add hpread.h. - (COMMON_OBS): Add hp-psymtab-read.o, hp-symtab-read.o - Allow the TUI code to be conditionally enabled. - (TUI_TARGET, TUI_LIBRARY): New variables, whose values are set by - the configuration script. They're set to the empty string when - the TUI isn't enabled. - (gdb$(GDBEXT)): Use those, instead of referring to tui-all and - tui/libtui.a directly. - - * Makefile.in: Avoid spurious relinking. - (gdb$(EXEEXT)): Depend on the actual tui library, not on a - fictitious target. Since the fictitious target never existed, make - would always relink. - (tui/libtui.a): Renamed from all-tui. Always recurse to make sure - the library is up to date. - (TUI_TARGET): Variable removed; there's no need for it any more. - - * Makefile.in: Look for tui include files in the tui source dir. - - * Use automake's `aclocal' program to generate aclocal.m4, to allow - us to use automake macros in configure.in with impunity. - - * acconfig.h: Add an entry for the `TUI' symbol. - - * acinclude.m4: New file, containing the code from the old - aclocal.m4. Incorporate (by reference) ../bfd/acinclude.m4, not - ../bfd/aclocal.m4, since we only want bfd's local macros. - - * aclocal.m4: Now automagically generated. Just run aclocal! - - * annotate.c (annotate_catchpoint): New function. - - * annotate.h: Taking the new includes (symtab.h and gdbtypes.h). - not taking the ansic C build fix. - (annotate_catchpoint): Declare. - - * blockframe.c (blockvector_for_pc_sect): Check that the end of - the block is >= to the pc, not just >. - - * breakpoint.c (create_temp_exception_breakpoint): #If it out -- - nothing calls it. - (bpstat_stop_status): Don't call SOLIB_HAVE_LOAD_EVENT if it's not - defined; don't call SOLIB_HAVE_UNLOAD_EVENT if it's not defined. - (bpstat_get_triggered_catchpoints): If we don't have shared - library support, then don't call SOLIB_LOADED_LIBRARY_PATHNAME nor - SOLIB_UNLOADED_LIBRARY_PATHNAME. - (watch_command_1): Don't require a run before a watch command - unless we're on HP [it's an HP OS bug, not a generic limitation] - (catch_load_command_1): Don't define if no shared libraries. - (catch_command_1): Don't claim to support fork catchpoints unless - CHILD_INSERT_FORK_CATCHPOINT is defined, don't claim to support - vfork catchpoints unless CHILD_INSERT_VFORK_CATCHPOINT is defined, - don't clain to support shared library load catchpoints if shared - libraries aren't supported, and don't claim to support exec - catchpoints unless CHILD_INSERT_EXEC_CATCHPOINT is defined - - (bpstat_do_actions): If we just set cmd to NULL, don't then try to - set it to cmd->next as we'll SEGV. - (bpstat_do_actions): Simplify significantly. It's - now almost as simple as before the merge and it no longer has the - HP bug that breakpoint commands are executed repeatedly. - - (break_at_finish_command_1): Rewrite and make sure - selected_frame points to a frame before using it. Fix string - termination error. - (break_at_finish_at_depth_command_1): Ditto. - - (can_use_hw_watchpoints): New static variable. - (read_memory_nobpt): Test for breakpoint type bp_none. - (insert_breakpoints): Test for breakpoint type bp_catch_exec; - insure have a current frame before getting the frame address. - (remove_breakpoints): Check for breakpoints of types bp_none, - bp_catch_fork, bp_catch_vfork, and bp_catch_exec. - (bpstat_stop_status): Fix updates of b->hit_count. - (bpstat_have_active_hw_watchpoints): New function. - (create_exec_event_watchpoint): New function. - (watch_command_1): Use can_use_hw_watchpoints. - (catch_fork_command_1): Change name of function to call from - target_create_catch_(v)fork_hook to create_(v)fork_even_catchpoint. - (delete_breakpoint): Test for already deleted breakpoints; add - support for bp_catch_fork, bp_catch_vfork, and bp_catch_exec - breakpoints. - (_initialize_breakpoint): Add can-use-hw-watchpoints to list of - user settable debugger variables. - - (clear_command): When there is no argument - to the clear command, delete all breakpoints that are hit at - default line. This will include a breakpoint whose line number - does not correspond to the default line, but has been set at - the default address. - - (delete_breakpoint): Don't call bpstat_clear_actions, instead - clear things explicitly; if clearing breakpoint_at, then also - clear any associated actions so that bpstat_do_actions won't try - to execute them. - (_initialize_breakpoint): Fix function name for bx command. - - (tbreak_command): Remove static from declaration. - (maintenance_info_breakpoints): Ditto. - - (reattach_breakpoints): New funct definition, used with with - hardware watchpoints - (breakpoint_1): Change format and add entries to bptypes[] - (maintenance_info_breakpoints): Function is no longer static - - (_initialize_breakpoint): Removed a comment. - (exception_catchpoints_are_fragile, - exception_support_initialized): Define. - (breakpoint_here_p): Fixed syntax error in conditional - (disable_watchpoints_before_interactive_call_start): Fixed call to - check_duplicates. Need a section parameter. - (enable_watchpoints_after_interactive_call_stop): Fixed call to - check_duplicates. Need a section parameter. - (breakpoint_re_set_one): Fixed call to check_duplicates. Need a - section parameter. - (delete_command): Fixed syntax error in conditional - (breakpoint_re_set): Fixed some typos. - - (args_for_catchpoint_enable): New type for handling exceptions. - (current_exception_event): New variable for handling exceptions. - (insert_breakpoints): Check for additional breakpoint types -- - bp_catch_throw, bp_catch_catch, call_disabled. Also, do some - additional work to handle an exception catchpoint. - (remove_breakpoint): There are additional breakpoint types to - check for: Bp_catch_throw, bp_catch_catch, call_disabled. Also do - some additional work to remove the exception catchpoints - (breakpoint_init_inferior): New input parameter. If there are - exception catchpoints delete them. - (breakpoint_here_p): There are additional breakpoint enable - settings to check for: Shlib_disabled, call_disabled - (breakpoint_thread_match): There are additional breakpoint enable - settings to check for: Call_disabled - (ep_is_catchpoint): There are additional breakpoint types to check - for: Bp_catch_throw, bp_catch_catch - (ep_is_exception_catchpoint): New function - (bpstat_find_step_resume_breakpoint): New function - (bpstat_do_actions): Introduce a local copy of the bpstat - structure. - (print_it_normal): There are additional breakpoint types to check - for: Bp_catch_throw, bp_catch_catch Changeing the control - structure a bit (adding else ifs) Add code to print out info about - exceptions. - (bpstat_stop_status): There are additional breakpoint enable - settings to check for: Call_disabled. there are additional - breakpoint types to chack for: Bp_catch_catch and bp_catch_throw. - Check to see if stopped due to an exception. Minor fixes to the - catch_errors calls. Make sure to count all encountered - breakpoints. There was something funky going on previously with - the counting. - (bpstat_what): Add cases for new breakpoint types: - bp_catch_catch, bp_catch_throw. - (bpstat_get_triggered_catchpoints): Check for new breakpoint types - : Bp_catch_catch, bp _catch_throw. - (breakpoint_1): Account for new breakpoint types. - (describe_other_breakpoints): Account for new breakpoint enable - setting (call_disabled) - (check_duplicates): Account for new breakpoint enable setting - (call_disabled) - (disable_breakpoints_in_shlibs): New function - (disable_watchpoints_before_interactive_call_start): New function - (mention): Account for new breakpoint types. - (break_command_1): Some additional checking for a valid PC. - (watch_command_1): Some dditional checking to prevent a watch - before a run command. - (ep_parse_optional_filename): Simplified for loop. - (create_exception_catchpoint): New function - (cover_target_enable_exception_callback): New function - (handle_gnu_4_16_catch_command): This used to be thcatch_command_1 - function.e - (create_temp_exception_breakpoint): New function - (catch_command_1): Differs from gdb 4.16 and gdb 4.17. Is now - calling catch_exception_command_1 using the EX_EVENT_CATCH and - EX_EVENT_THROW values as parameters. - (clear_command): Additional comments - (delete_breakpoint): Handle exceptions. Check for additional - breakpoint enable settings: Shlib_disabled, call_disabled. - (delete_command): Hp folks are claiming that we should not delete - shlib_event breakpoints - (breakpoint_re_set_one): Moved call to check_duplicates. Add new - breakpoint types to switch statement. - (breakpoint_re_set_thread): New function - (enable_command): Account for new breakpoint types. - - (insertion_state_t): New enumerated type. - (remove_breakpoint): New param in funct prototype. - (insert_breakpoints): Check for bp_catch_fork and bp_catch_vfork. - (remove_breakpoints): Changed call to remove_breakpoint. - (detach_breakpoints): New function. - (remove_breakpoint): New parameter, is. Also changed the - way b->inserted is set. - (ep_is_catchpoint): New function. - (ep_is_shlib_catchpoint): New function. - (print_it_normal): Check for bp_catch_load, bp_catch_unload, - bp_catch_fork, bp_catch_vfork, bp_catch_exec. Also new code - to print out catchpoints properly. - (bpstat_stop_status): Check for bp_catch_fork, bp_catch_vfork, - and bp_catch_exec. Also, some code to check for catching a - shared library load/unload. - (bpstat_what): Added catch_shlib_event to class enumeration. - Defined new macro, shlr. Expanded the bpstat_what_main_action - table. Add cases for bp_catch_load, bp_catch_unload, - bp_catch_fork, bp_catch_vfork, and bp_catch_exec. - (bpstat_get_triggered_catchpoints): New function. - (breakpoint_1): Changes to bptypes definition. Also check for - bp_catch_load, bp_catch_unload, bp_catch_fork, bp_catch_vfork, - bp_catch_exec. Similar changes to the switch statement. - (set_raw_breakpoint): Initialize new breakpoint structure fields. - dll_pathname, triggered_dll_pathname, forked_inferior_pid, - exec_pathname. - (create_solib_load_unload_event_breakpoint): New function. - (create_solib_load_event_breakpoint): New function. - (create_solib_unload_event_breakpoint): New function. - (create_fork_vfork_event_catchpoint): New function. - (create_fork_event_catchpoint): New function. - (create_vfork_event_catchpoint): New function. - (mention): New cases for bp_catch_load, bp_catch_unload, - bp_catch_fork, bp_catch_vfork, bp_catch_exec. - (ep_skip_leading_whitespace): New function. - (ep_find_event_name_end): New function. - (ep_parse_optional_if_clause): New function. - (ep_parse_optional_filename): New function. - (catch_fork_kind): New enumerated type. - (catch_fork_command_1): New function. - (catch_exec_command_1): New function. - (catch_load_command_1): New function. - (catch_unload_command_1): New function. - (catch_throw_command_1): New function. - (catch_command_1): Now calls catch_throw_command_1. - (tcatch_command): New function. - (delete_breakpoint): Changed call to remove_breakpoint. - Also free the new fields in the breakpoint structure. - (breakpoint_re_set_one): Handle bp_catch_load, bp_catch_unload, - bp_catch_fork, bp_catch_vfork, bp_catch_exec. - (disable_command): Handle bp_catch_load, bp_catch_unload, - bp_catch_fork, bp_catch_vfork, bp_catch_exec. - (enable_command): Handle bp_catch_load, bp_catch_unload, - bp_catch_fork, bp_catch_vfork, bp_catch_exec. - (_initialize_breakpoint): Alter add_com call for catchpoints, - add add_com call for watchpoints. - - * breakpoint.h (enum bptype): New entries bp_catch_catch, - bp_catch_throw, and bp_none, bp_catch_load, bp_catch_unload, - bp_catch_fork, bp_catch_vfork,bp_catch_exec. Add declarations for - new functions bpstat_have_active_hw_watchpoints and - create_exec_event_catchpoint. - (tbreak_command): Add prototype. - (update_breakpoints_after_exec): Add prototype; update comments. - (reattach_breakpoints): New funct prototype declaration. - (enable): New enumerated value call_disabled. - (bpstat_find_step_resume_breakpoint): New funct decl. - (inf_context): New enumerated type. - (breakpoint_re_set_thread): New funct decl. - (breakpoint_init_inferior): New parameter. - (disable_watchpoints_before_interactive_call_start): New funct decl. - (enable_watchpoints_after_interactive_call_stop): New funct decl. - (disable_breakpoints_in_shlibs): New funct decl. - (struct breakpoint): New fields, dll_pathname,triggered_dll_pathname, - forked_inferior_pid,exec_pathname BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK. - (bpstat_get_triggered_catchpoints): New function. - (detach_breakpoints): New function. - (create_solib_load_event_breakpoint): New function. - (create_solib_unload_event_breakpoint) New function. - (create_fork_event_catchpoint): New function. - (create_vfork_event_catchpoint): New function. - (ep_is_catchpoint): New function. - (ep_is_shlib_catchpoint) New function. - (enum bpstat_what_main_action): New entry. - - * buildsym.c (finish_block): Get rid of processing_hp_compilation; - handle LOC_INDIRECT case. Set the BLOCK_GCC_COMPILED to the right - compiler. - (push_context): Add symbols for parameters to the context_stack. - (merge_symbol_lists): New function. Merges two symbol lists. - (struct context_stack): Add new field param. - - (processing_hp_compilation): New external var. - - * c-exp.y: Use external flag hp_som_som_object_present to decide - whether code was compiled by HP's compilers. Add two new C++ - tokens for true and false. - (yylex): Check for template name is done differently for the - HP/aCC compiler case; change some of the template processing code - for handling HP aCC templates. - - * c-lang.c (c_create_fundamental_type): Added case to handle - template args. Handle FT_BOOLEAN type. Set no sign flag for - FT_CHAR. - (cplus_builtin_types): New structure for c++ builtin types. - (cplus_language_defn): Use cplus_builtin_types instead of - c_builtin_types. - - * c-typeprint.c (c_type_print_base): Don't print 'privete' label - for a class if all members are private, similarly don't print - 'public' for a struct. Add support for sized enums (HP/aCC). get - rid of the 'static' keyword printed by the demangler for member - function, when printing the type of a class. 'static' will be - added by this function. If the demangled name is null, and the - method is not stubbed, get the signature by looking at the - information stored in the symbol structure. Remove printing of - 'const' and 'volatile' keywords for methods. This is now taken - care as part of the demangled member names. - (cp_type_print_method_args): New function. To print a C++ method - arguments and name to the output stream. - - (c_type_print_cv_qualifier): New function. Print out "const" and - "volatile" attributes. - (c_type_print_varspec_prefix): Print const or volatile qualifiers. - (c_type_print_args): Print 'void' for c++. - (c_type_print_varspec_suffix): Print 'void' for a no argument - function. - (c_type_print_base): Print const or volatile qualifiers. Do not - print 'unnamed union' if HP aCC compiler used. Distinguish - between struct and class based on the DECLARED_TYPE. Handle - HP/aCC compiler case for not printing vtable. Add Template - support. - - (cp_type_print_derivation_info): Print out 'protected' when - appropriate. This applies only to HP's compilers, not gcc. - - (c_val_print): Added parameter embedded_offset. Add - embedded_offset to valaddr in function calls; fix calls to - val_print and cp_print_value_fields. process TYPE_CODE_METHOD as - well. moved call to check_typedef out of conditional. added - embedded offset param to val_print call. - - (c_value_print): Add new parameter to call to val_print. - handle pointer to class case. Attempt to - determine the real type of the object to be printed. - ensure that const char *, const unsigned char * - come out without the type but the volatile variants - and the signed variants don't. - - * coff-solib.c (coff_solib_add): Add parameters to call - to symbol_file_add. - - * coff-solib.h: (Solib_REMOVE_INFERIOR_HOOK): New macro. defined - to 0. functionality not implemented for coff. - (SOLIB_CREATE_CATCH_LOAD_HOOK): New macro, generate error message - for coff. - (SOLIB_CREATE_CATCH_UNLOAD_HOOK): Ditto. - (SOLIB_HAVE_LOAD_EVENT): Ditto. - (SOLIB_LOADED_LIBRARY_PATHNAME): Ditto. - (SOLIB_HAVE_UNLOAD_EVENT): Ditto. - (SOLIB_UNLOADED_LIBRARY_PATHNAME): Ditto. - (SOLIB_IN_DYNAMIC_LINKER): Ditto. - (SOLIB_RESTART): Ditto. - - * command.c (find_cmd): New function. (lookup_cmd_1): Call it, - change parsing if tui_version or xdb_commands is set. - (_initialize_command): Install new alias if xdb_commands is set. - - * complaints.h: Add ifdef...endif pair at beginning and end of file. - - * config.in, configure: Regenerated. - - * config/pa/hppabsd.mh (NATDEPFILES): Added new files - hp-psymtab-read.o and hp-symtab-read.o. - * config/pa/hppahpux.mh (NATDEPFILES): Ditto. - - * config/pa/hppahpux.mh (TERMCAP): Use -lHcurses. - * config/pa/hppaosf.mh (NATDEPFILES): Ditto. - - * config/pa/hpux1020.mh (TERMCAP): Use -lHcurses. - (MH_CFLAGS): New flag, -D__HP_CURSES, this define - is used by HP's linker to find the correct curses library. - - * config/pa/hpux1020.mh: New file. - - * config/pa/hpux1020.mt: New file. - - * config/pa/hpux1100.mh (TERMCAP): Link against -lcurses, not - -lHcurses. The latter does not contain mvwaddstr, wscrl, or - wstbwlmkfzz. - - * config/pa/hpux1100.mh (TERMCAP): Use -lHcurses. - (MH_CFLAGS): New flag, -D__HP_CURSES, this define - is used by HP's linker to find the correct curses library. - - * config/pa/hpux1100.mh (TERMCAP): When hosting on hpux 11.00, use - -lHcurses rather than -lcurses. - - * config/pa/hpux1100.mh: New file. - - * config/pa/hpux1100.mt: New file. - - * config/pa/nm-hppah.h (CHILD_HAS_SYSCALL_EVENT): New macro - (CHILD_THREAD_ALIVE): New macro - (STOPPED_BY_WATCHPOINT): Add a condition to the macro, - ! stepped_after_stopped_by_watchpoint - (TARGET_ENABLE_HW_WATCHPOINTS): New macro - (hppa_enable_hw_watchpoints): New funct decl - (TARGET_DISABLE_HW_WATCHPOINTS): New macro - ( hppa_disable_hw_watchpoints): New funct decl - these are for HP's implementation of fast - watchpoints (via page protection). - (target_pid_to_str): New macro, calls hppa_pid_to_str - (target_tid_to_str): New macro, calls hppa_tid_to_str - - * config/pa/nm-hppah.h (CHILD_POST_WAIT): Delete; - (CHILD_CREATE_CATCH_FORK_HOOK): Replace with - CHILD_INSERT_FORK_CATCHPOINT and CHILD_REMOVE_FORK_CATCHPOINT. - (CHILD_CREATE_CATCH_VFORK_HOOK): Replace with - CHILD_INSERT_VFORK_CATCHPOINT and CHILD_REMOVE_VFORK_CATCHPOINT. - (CHILD_CAN_FOLLOW_VFORK_PRIOR_TO_EXEC, - CHILD_INSERT_EXEC_CATCHPOINT, CHILD_REMOVE_EXEC_CATCHPOINT, - CHILD_HAS_EXECD, CHILD_REPORTED_EXEC_EVENTS_PER_EXEC_CALL, - CHILD_POST_ATTACH, TARGET_HAS_HARDWARE_WATCHPOINTS, - TARGET_CAN_USE_HARDWARE_WATCHPOINT, - TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, - TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT, - HAVE_NONSTEPPABLE_WATCHPOINT, target_insert_watchpoint, - target_remote_watchpoint): New macros. - - * config/pa/nm-hppah.h (CHILD_XFER_MEMORY): Reinsert accidentally - deleted define. - - * config/pa/nm-hppah.h: - (PREPARE_TO_PROCEED): Defined macro to use - hppa_prepare_to_proceed. - (hppa_pid_to_str): Extern decl. - (hppa_tid_to_str): Extern decl. - (target_pid_or_tid_to_str): New macro definition. - (hppa_pid_or_tid_to_str): Extern decl. - (ENSURE_VFORKING_PARENT_REMAINS_STOPPED): New macro - for - handling events caused by a call to vfork. - (hppa_ensure_vforking_parent_remains_stopped): Extern decl. - (RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK): New macro - - for handling events caused by a call to vfork. - (hppa_resume_execd_vforking_child_to_get_parent_vfork): Extern decl. - - * config/pa/nm-hppah.h: Fix PREPARE_TO_PROCEED macro. - - * config/pa/nm-hppah.h: Fix for gcc compile on HPUX, change - PT_RDUAREA to PT_RUAREA. - - * config/pa/nm-hppah.h: Introduced an HPUXHPPA define. - A bit of a hack so that I can ifdef some code that - only works for the HP wildebeest debugger. - - * config/pa/nm-hppah.h: Lots of new CHILD_ defines; - process_event_kind enum. - - * config/pa/tm-hppa.h (BREAKPOINT32): New define. - (CALL_DUMMY_HAS_COMPLETED): New define. - - * config/pa/tm-hppa.h (STACK_ALIGN): New macro. - (NO_EXTRA_ALIGNMENT_NEEDED): New macro. - (PC_REQUIRES_RUN_BEFORE_USE): New macro. - (REGISTER_NAMES): Formatting in file changed. - (CR27_REGNUM): Base register for thread local storage. - (USE_STRUCT_CONVENTION): New macro used to decide whether - a function returning a value of type type will - put it on the stack or into registers (based on the - PA risc calling conventions). - (EXTRACT_RETURN_VALUE): Fixed calculation for extracting return value. - (VALUE_RETURNED_FROM_STACK): New macro. - (TARGET_READ_PC): Declared the function used in the definition. - (SKIP_TRAMPOLINE_CODE): Declared the function used in the definition. - (TARGET_WRITE_PC): Declared the function used in the definition. - (TARGET_READ_FP): Declared the function used in the definition. - - * config/pa/tm-hppa.h (STRCAT_REGISTER): Define macro for - future use. - (pa_do_strcat_registers_info): Moved function decl from - defs.h to this HPUX specific .h file. - - * config/pa/tm-hppa.h (USE_STRUCT_CONVENTION): Type_LENGTH returns - bytes, not bits; fix off by 8 error. - - * config/pa/tm-hppa.h: - New comment for obj_unwind_info definition - New typedef, obj_private_struct - - * config/pa/tm-hppa.h: Delete most target_ macros -- use default - versions instead; remove extraneous comma from proc_wait macro. - - * config/pa/tm-hppa.h: Get rid of macro HP_COMPILED_TARGET. - - * config/pa/tm-hppa.h: Removed redefinitions of - USE_STRUCT_CONVENTION and STACK_ALIGN macros. - - * config/pa/tm-hppa.h: Some new definitions - New macros: Arg0_REGNUM, ARG1_REGNUM, ARG2_REGNUM, ARG3_REGNUM. - target_pid_to_exec_file, target_acknowledge_forked_child, - target_create_catch_fork_hook, target_create_catch_vfork_hook, - target_has_forked, target_has_vforked, require_attach, - require_detach, proc_wait - New funct decls: Hppa_pid_to_exec_file, - hppa_acknowledge_forked_child, hppa_create_catch_fork_hook, - hppa_create_catch_vfork_hook, hppa_target_has_forked, - hppa_target_has_vforked, hppa_require_attach, - hppa_require_detach, process_wait - (unwind_table_entry): Added comments to describe struct fields. - - * config/pa/tm-hppah.h (somsolib.h): Include it. - - * config/pa/tm-hppah.h: - (CHILD_ENABLE_EXCEPTION_CALLBACK): New define - (CHILD_GET_CURRENT_EXCEPTION_EVENT): New define - - * configure.host (hppa-*-hpux10.20, hppa-*-hpux11.0*): New configs. - - * configure.in (AC_CHECK_HEADERS): Add check for term.h. - - * configure.in: Add an --enable-tui argument. - - * configure.in: Construct tui/Makefile from tui/Makefile.in. - - * configure.in: Use AM_PROG_CC_STDC. If we have the GUI, then we - need this to process libgui.h. - - * convex-tdep.c (decout): Change FILE to GDB_FILE. - - * corefile.c: Include objfiles.h, symfile.h. - (core_file_command): Attempt to determine the name of the symbol - file from the core file. - (read_memory_string): New function. - - * corefile.c (core_file_command): Temporary hack to make non-hpux - work. For, non-hpux, t->to_core_file_to_sym_file does not have a - reasonable value. No target_ops vector on the stack gives it a - non-zero value. fix later. - - * corelow.c (core_file_to_sym_file): Added new local variable, - failing command, and do some explicit type castings. - (core_ops): Add three new fields: to_has_syscall_event, - to_enable_exception_callback, to_get_current_exception_event. - Necessary since we still have oldstyle initialization in - this file - - * corelow.c: Include unistd.h - (core_file_to_sym_file): New function - (core_file_thread_alive): New function - (core_ops): Added new target ops vector fields. see below. And - yes we definitiely need to initialize them here, as long as - we're using static initialization. - - * cxux-nat.c (add_shared_symbol_files): Additonal params for calls - to symbol_file_add. - - * defs.h (gdb_file_isatty): New function decl. - - * defs.h (GDB_FILE): If TUI is defined, define a structure rather - than making this an alias for FILE. - (gdb_stdout, gdb_stderr): If TUI is defined, then define these - as pointers to variables of type GDB_FILE rather than making them - be aliases for stdout and stderr. - - * defs.h (TUIDO): Add definition conditionalized on definition - (or lack thereof) of TUI. - - * defs.h (command_class): Add two additional values. - (precision_type): New enum. - - * defs.h (gdb_fclose): Add declaration. - - * defs.h (store_address): Change prototype to match function. - - * defs.h (tui_version, xdb_commands, dbx_commands): Add decl's. - - * defs.h (gdb_file_deallocate): New function declaration - - * defs.h: - (streamtype): New enumerated type to distinguish between - output to a FILE and output to a buffer. - (tui_stream): New struct type, named GDB_FILE. Contains, - streamtype, FILE, buffer, and bufferlength fields. - (gdb_stdout): Of type GDB_FILE, will pass this around gdb - rather than stdout. - (gdb_stderr): Of type GDB_FILE, will pass this around gdb - rather than stderr. - (fputs_unfiltered_hook): Change stream parameter from FILE to - GDB_FILE - (flush_hook): Change stream parameter from FILE to GDB_FILE - (gdb_fclose): Fix declaration for gdb_fclose; parameter is now of - type GDB_FILE ** - (gdb_file_adjust_strbuf): New function declaration. function lives in - utils.c. - (gdb_file_init_astring): New function declaration. function lives - in utils.c - (gdb_file_get_strbuf): New function declaration. function lives - in utils.c - - * defs.h: Additional include files included when TUI is defined. - - * defs.h: Funct decl source_full_path_of. - - * demangle.c: Add HP_DEMANGLING_STYLE_STRING. - - * demangle.c: Added new demangling style, EDG_DEMANGLING_STYLE_STRING, - to the demanglers structure. This is for support of - Kuck & Assoc.'s changes for demangling. - - * eval.c (evaluate_subexp_standard): C++ member function changes. - - * eval.c (evaluate_subexp_standard): Verify TYPE_TARGET_TYPE is - non NULL before dereferencing it. - - * eval.c (evaluate_subexp_standard): With HP/aCC compiler it is not possible - to perform inferior calls via function pointers. - Resolve calls to overloaded functions using find_overload_match. - We cannot handle HP/aCC pointers to member functions. - Deal with HP/aCC pointers to members in various kind of expressions. - - * f-lang.c (f_printchar): Change FILE to GDB_FILE. - (f_printstr): Ditto. - (emit_char): Ditto. - - * f-lang.c (f_printstr): Change stdout to gdb_stdout. - - * f-typeprint.c (f_print_type): Change FILE to GDB_FILE. - (f_type_print_varspec_prefix): Ditto. - (f_type_print_args): Ditto. - (f_type_print_varspec_suffix): Ditto. - (print_equivalent_f77_float_type): Ditto. - (f_type_print_base): Ditto. - - * findvar.c (): Hp snapshot 3 changes. (extract_address): Coerce - return value from extract_unsigned_integer to CORE_ADDR. - (store_address): Change val from CORE_ADDR to LONGEST; changes to - support machines where CORE_ADDR and LONGEST are different sizes. - (get_saved_register): Coerce arg to store_address to LONGEST. - (read_relative_register_raw_bytes): Cast last arg to - store_address to LONGEST. (read_register): Cast return from - extract_address to a CORE_ADDR. (write_register_pid): Change val - from LONGEST to CORE_ADDR. (read_pc_pid): Save and restore - inferior_pid if necessary. (write_pc_pid): Ditto. - (read_var_value): Cast arg to store_address. - - * findvar.c (read_relative_register_raw_bytes_for_frame): New - function. - (read_relative_register_raw_bytes): Call it. - - * findvar.c (symbol_read_needs_frame): Handle LOC_THREAD_LOCAL_STATIC and - LOC_INDIRECT. - - * fork-child.c (fork_inferior): Chenge fifth parameter to be a - function returning void. - - * fork-child.c (fork_inferior): Delete unused variable f. - - * fork-child.c: - (Startup_WITH_SHELL): New macro -- interim fix for a bug - (breakup_args): New function -- breaks up an argument string into - an argument suitable for passing into execvp(). - (fork_inferior): Handling problems with starting up gdb with a shell. - -- again, this appears to be an interim fix. - - * fork-child.c: - (fork_inferior): Added a comment - (clone_and_follow_inferior): New function. - (startup_inferior): Minor formatting changes. - - * fork-child.c: - (fork_inferior): Hp change is problematic. The -f option has - different meanings for different shells. It is particularly - inappropriate for bourne shells. - - * fork-child.c: - (fork_inferior): Added new parameter, pre_trace_fun. - pre_trace_fun is a function pointer. For some targets, - like HPUX, this function gets called to prepare for forking - a child. - - * fork-child.c: - (fork_inferior): Fixed call to init_trace_fun - - * fork-child.c: - Moved definition of STARTUP_WITH_SHELL to inferior.h - Added a DEBUGGING macro. Currently set to 0. May remove - later. - breakup_args: Add DEBUGGING ifdefs. more sophisticated - parsing to break up args. - (fork_inferior): Rename kshell variable to shell. new local - variable, tryname. Make use of STARTUP_WITH_SHELL macro. - More error processing if starting up with a shell. - (startup_inferior): Distinguish between starting up with a shell - and not doing so. - - * gdbthread.h: - Declarations for load_infrun_state and save_infrun_state take - an additional parameter. - - * gdbthread.h: Note that sometime between gdb 4.16 and 4.17, - thread.h was renamed gdbthread.h - (load_infrun_state): Additional parameters - (store_infrun_state): Additional parameters - - * gdbthread.h: Include breakpoint.h - - * hp-psymtab-read.c (QUICK_LOOK_UP): Redefine to be 0. - (hpread_build_psymtabs): Deal with enums. - (hpread_start_psymtab): Include section offset. - (hpread_end_psymtab): Take care of offset. - - * hp-psymtab-read.c (TRUE): Define. - (FALSE): Define. - (file_exists): New function. Checks for existance of file. - (hpread_pxdb_needed): Rewrite. - (hpread_quick_traverse): Use correct demangling style. - Handle F77 case. - (hpread_get_header): Rewrite. - (hpread_get_textlow): Add support for DOC_FUNCTION. - (hpread_build_psymtabs): Make sure we do the right thing - for pxdb and F77. - - * hp-psymtab-read.c (hpread_pxdb_check): Change parenthesis positions. - - * hp-psymtab-read.c (hpread_quick_traverse): Compare CORE_ADDR - variable end_addr to 0 instaed of NULL to get rif of gcc warning. - - * hp-psymtab-read.c: - (Hpread_get_textlow): Added param to function - Defined convennience macros and some datatypes and variables for - processing the quick lookup-tables. Looks like the code existed - before, but has been munged. - (hpread_pxdb_needed): Major rearrangements of code. Additional local - variables. Also, more extensive checking for various scenarios: - debug info for optimized code vs. unoptimized code, pxdb has been - run vs. pxdb has not been run. - (VALID_FILE): New macro - (VALID_MODULE): New macro - (VALID_PROC): New macro - (VALID_CLASS): New macro - (FILE_START): New macro - (MODULE_START): New macro - (PROC_START): New macro - (FILE_END): New macro - (MODULE_END): New macro - (PROC_END): New macro - (FILE_ISYM): New macro - (MODULE_ISYM): New macro - (PROC_ISYM): New macro - (VALID_CURR_FILE): New macro - (VALID_CURR_MODULE): New macro - (VALID_CURR_PROC): New macro - (VALID_CURR_CLASS): New macro - (CURR_FILE_START): New macro - (CURR_MODULE_START): New macro - (CURR_PROC_END): New macro - (CURR_FILE_ISYM): New macro - (CURR_MODULE_ISYM): New macro - (CURR_PROC_ISYM): New macro - (TELL_OBJFILE): New macro - (pst_syms_struct): New typedef to keep track of the start/end symbol - table (LNTT) indices of psymtabs created so far. - (pst_syms_count): New variable - (pst_syms_size): New variable - (told_objfile): New variable - (init_pst_syms): New function. sets up psymtab symbol index stuff. - (clear_pst_syms): New function. clean up psymtab symbol index stuff. - (record_pst_syms): New function. add info about newest psymtab to symbol - index table. - (find_next_pst_start): New function. Find a suitable symbol table index. - (find_next_file_isym): New function - (find_next_proc_isym): New function - (find_next_module_isym): New function - (scan_procs): New function. Scan and record partial symbols for all - functions starting from specified index and in a specified code range. - (hpread_quick_traverse: Major rearrangement of code. The function - now uses all the nifty macros. There are some new local variables. - Check for EDG_DEMANGLING style. ifdef out some code for handling F77. - Previously, the function looped over all the modules in the table. - Now, the function loops over all the files, modules, and procedures. - With HP aCC and CTTI, it is possible for a compiled object to have a - file and no module. - (hpread_build_psymtabs): Added a section of code ifdefed by - QUICK_LOOK_UP. It check to see whether or not there are any globals - in the executable. Fix number of params to hpread_start_psymtab call. - Some changes to the way DNTT_TYPE_MODULE is handled. - (hpread_get_textlow): Change in signature, minor code changes. The - function finds the low address associated with a specified symbol. - In looking for the address for the symbol avoid going of the end of - the LNTT file. - - * hp-psymtab-read.c: Change TRUE to 1 and FALSE to 0. Do some - reformatting. - - * hp-psymtab-read.c: Include demangle.h - (trans_lang): New function to let gdb know the correct language. - (hpread_quick_traverse): Use ARM style demangling. - Demangle procedures names. - Use gdb language names instead of hp language names. - Add symbol to list using its demangled name. - - * hp-psymtab-read.c: New file. - (hpread_call_pxdb): New function. Call PXDB to process our file. - (hpread_pxdb_check): New function. Return TRUE if the file needs - pre-processing by PXDB and we have thus called PXDB to do this - processing and the file needs to be re-loaded. - (hpread_quick_traverse): New function. Traverse the quick look-up - tables, building a set of psymtabs. - (hpread_get_header): New function. Get appropriate header from obj - file, based on pxdb type - (hpread_symfile_init): No change from hpread.c - (hpread_build_psymtabs): If there are quick lookup tables, read those, - then scan the global section LNTT. Otherwise, just scan the whole LNTT. - Changed: Add a global function entry to the global partial symbol list. - Handle end of symbols, for QLT case. - In case of TAGDEF, if it is a class or a template, add the name to the - var_namespace, so that it is known as a type by gdb. - In case of CONSTANT, and it is global, add it to the globals. - (hpread_symfile_finish): No change from hpread.c - (hpread_get_lntt): Make it not static - (hpread_get_gntt): No change from hpread.c - (hpread_get_slt): Make it not static - (hpread_get_textlow): No change from hpread.c - (hpread_start_psymtab): No change from hpread.c - (hpread_end_psymtab): No change from hpread.c - - * hp-symtab-read.c (hpread_get_scope_start): Renamed. It was - hpread_get_depth. - (hpread_type_translate): Distinguish between signed and unsigned char - types. - (hpread_psymtab_to_symtab): Set flag for hp compilation. - (hpread_read_function_type): Append symbols for parameters to local - list as well as to the global list. Get the parameters types from the - local list instead of the global list. - (hpread_read_struct_type): Add new field num_fn_fields to next_fn_field - structure. Rewrite handling of templates - (hpread_type_lookup): Change handling of dntt_type_modifier. - (hpread_process_one_debug_symbol): Call hpread_get_scope_start instea - of hpread_get_depth. Handle enum as well. - (hpread_get_scope_depth): New function. Get nesting depth for a - DNTT entry. - - * hp-symtab-read.c (hpread_psymtab_to_symtab): Set - processing_gcc_compilation to 0. - - * hp-symtab-read.c (hpread_psymtab_to_symtab_1): Change stdout to - gdb_stdout; change fflush to gdb_flush. - (hpread_psymtab_to_symtab): Change fflush to gdb_flush. - - * hp-symtab-read.c (hpread_read_enum_type): Declare variable. - (hpread_read_struct_type): Eliminate references - to 'args' member of fn_field. - - * hp-symtab-read.c (hpread_read_struct_type): A static member - is now indicated by the bitsize field, not the bitpos. - Initialize physname to empty. - (fix_static_member_physnames): Use new macros to deal with - physnames. - - * hp-symtab-read.c (hpread_read_struct_type): Change references - to bitpos member of struct field to use the FIELD_BITPOS macro. - - * hp-symtab-read.c (hpread_read_struct_type): Comment out reference to - obsolete field fn_field.args. - Add struct complaint definitions for complaints. - (hpread_read_struct_type): Change call to complain. - (hpread_read_array_type): Change call to complain. - (hpread_type_lookup): Change call to complain. - (hpread_process_one_debug_symbol): Change calls to complain. - (hpread_type_translate): Change calls to complain. - - * hp-symtab-read.c (hpread_read_struct_type): Make sure bitvector - has been allocated before calling has_vtable. - - * hp-symtab-read.c (hpread_read_struct_type): Revert change, - just check for vtable without checking for bitvectors too. - - * hp-symtab-read.c: - (Hpread_expand_symtab): Change name of local variable from - at_end_of_module to at_module_boundary. - Also, if demangling style is already EDG, do not reset it - to the HP demangling style. - Change at_end_of_module param to hpread_process_one_debug_symbol - call to at_module_boundary. - No longer break out of loop when reach end of module. With CTTI, - the compiler can generate function symbols which are not in - any module. Typically they show up after the end of one - module and before the start of the next module. - (hpread_read_struct_type): Check that the debug info for - a TEMPLATE_ARG is correct. - (hpread_process_one_debug_symbol): Change name of at_end_of_module_p - param to at_module_boundary_p. - Also set *at_module_boundary_p = -1 if missing a module end and set - it to 1 when finished expanding the debug info. - Handle TLS variable. - - * hp-symtab-read.c: Include defs.h, symtab.h, gdbtypes.h, complaints.h. - (fixup_class): New static variable. - (fixup_method): New static variable. - (hpread_get_location): Rewrite. - (hpread_has_name): Add cases for DNTT_TYPE_DOC_FUNCTION and - DNTT_TYPE_DOC_MEMFUNC - (hpread_expand_symtab): Use HP demangling style. - Set hp_som_som_object_present to 1. - (hpread_type_translate): Error out if not immediate. Issue warning - if there is an unhandled type code. - (error_in_hpread_type_translate_complaint): Remove this structure. - (hpread_read_enum_type): Don't assume size of enum is always 4 bytes. - (hpread_read_function_type): Add new parameter to indicate a new block. - Do not add the parameters to the symbol list. - If the type was read in earlier, do not modify the type structure. - If we are creating a new block, set the local symbol list to be the - param list. - Need to mark this type as preprocessed. - (hpread_read_doc_function_type): New function. Read and internalize - a native DOC function debug symbol. - (hpread_read_struct_type): A method can be of type doc_function and - doc_memfunc too. - Handle case in which a method is read before its class. Deal with - incomplete method types. - Handle cases in which HP/aCC compiler creates operator names w/o - the 'operator' keyword. Rewrite the loop over the fileds. - (fix_static_member_physnames): New function. Adjust the physnames for - each static member. - (fixup_class_method_type): New function. Fix-up the type structure for a - class. - (hpread_read_array_type): Change complaint to warning. - (hpread_type_lookup): Add case for DNTT_TYPE_DOC_FUNCTION. - For structures/classes set static member to point to strings with full - names. - Change calls to hpread_read_function_type to pass extra parameter. - (hpread_record_lines): Handle case for SLT_NORMAL_OFFSET. - (class_of): New function. Given a function "f" which is a member of a class, - find the classname that it is a member of. - (hpread_process_one_debug_symbol): Deal with possible alias field from the - som record for the Function or Entry type. - Do the demangling ourselves if the gdb demangler failed. - Add support for DOC functions. - For function types, add parameters to local list. - (hpread_get_scope_depth): Make this function a no-op. - (hpread_adjust_bitoffsets): New function. Adjust the bitoffsets for all - fields of an anonymous union. - (hpread_get_next_skip_over_anon_unions): New function. Skip over anonymous - unions. - - * hp-symtab-read.c: Include demangle.h - (hpread_expand_symtab): Ensure we are using ARM-style demangling. - (hpread_process_one_debug_symbol): Set the mangled and demangled - names for functions. - Record the class name to generate the demangled names of member - functions. - - * hp-symtab-read.c: New file. - (hpread_get_depth): No change from hpread.c - (hpread_get_line): No change from hpread.c - (hpread_get_location): No change from hpread.c - (hpread_has_name): Make it not static. Return 1 for DNTT_TYPE_BLOCKDATA - and DNTT_TYPE_MEMFUNC. Return 0 for CLASS_SCOPE, REFERENCE,PTRMEM, - PTRMEMFUNC, CLASS, GENFIELD, VFUNC, MEMACCESS, INHERITANCE, - FRIEND_CLASS, FRIEND_FUNC, MODIFIER, OBJECT_ID, TEMPLATE, TEMPLATE_ARG, - FUNC_TEMPLATE, LINK. - (hpread_psymtab_to_symtab_1): No changes from hpread.c - (hpread_psymtab_to_symtab): Make it a static function - (hpread_expand_symtab): Modified - (hpread_type_translate): If not typep.dntti.immediate do not abort, - but complain and return. Same for default action. Handle more HP_TYPEs. - (hpread_lookup_type): Initially allocate a correct-size type-vector. - (hpread_alloc_type): Reset type_addr only if a type was allocated. - (hpread_read_enum_type): If this has already a type associated, return. - (hpread_read_function_type): Do different things depending on whether - function is a MEMFUNC, a TEMPLATE, a FUNCTION som record. - Do not use the LOC_REGPARM_ADDR symbol class. - (hpread_read_struct_type): Handle classes and templates too. Major - rewrite. - (hpread_get_nth_template_arg): New function. - (hpread_read_templ_arg_type): New function. - (hpread_read_set_type): No change from hpread.c - (hpread_read_array_type): Modified - (hpread_read_subrange_type): Add handling of more DNTT entries. - added support for templates, classes, references, virtual functions. - (hpread_type_lookup): Handle DNNT_TYPE_MODULE. - (hpread_record_lines): No changes from hpread.c - (hpread_process_one_debug_symbol): Handle WITH, COMMON, - CLASS_SCOPE. Expand TAGDEF case to handle classes and templates. - - * hppa-tdep.c (pa_do_strcat_registers_info): Has a new parameter, - precision, which is passed into the call to pa_strcat_fp_reg to - indicate whether to display the floating point registers using - single or double preceision. - (pa_strcat_registers): Introduce local variable, precision, and - pass it into call to pa_strcat_fp_reg. - (pa_strcat_fp_reg): Modified function. New parameter, precision, - used by function to decide whether to use single or double - precision. Also added the code to put a double precision value - into a buffer. - - * hppa-tdep.c: Add'l includes <machine/save_state.h>, - <unistd.h>, declare pa_register_look_aside, define is_pa_2. - (rp_saved): Check for where to read the return pointer from. - (pa_do_registers_info): Handle is_pa_2. (pa_register_look_aside): - new function. (pa_print_registers): Handle is_pa_2. - (in_solib_call_trampoline): Handle a compiler/linker error. - (skip_trampoline_code): Changes to some masks used in examining - instructions. (inst_saves_fr): Test for FSTWS instruction. - (skip_prologue): Renamed to skip_prologue_hard_way. - (after_prologue): New function. (skip_prologue): New function. - - * hppa-tdep.c (after_prologue): If f is NULL, don't dereference - it. - - * hppa-tdep.c (after_prologue): If no debug info, return zero - telling caller that we need to find the end of the prologue via - the hard way (instruction examination). - - * hppa-tdep.c (find_unwind_entry): Avoid dereferencing a null - pointer. - - * hppa-tdep.c (hppa_pid_to_exec_file): Deleted -- no longer used. - - * hppa-tdep.c (hppa_prepare_to_proceeed): Add prototype. - (read_unwind_info): Purecov comments, bug fixes. - (find_unwind_entry): Purecov comments, bug fixes. - (find_stub_with_shl_get): Purecov comments. - (frame_chain): Additional parens. - (hppa_push_arguments): Changes to commented out version of routine. - (hppa_fix_call_dummy): Purecov comments, fix location of end.o. - (in_solib_call_trampoline): Purecov comments. - (in_solib_return_trampoline): Purecov comments. - (setup_d_pid_in_inferior): Fix location of end.o. - (initialize_hp_cxx_exception_support): Fix location of end.o. - (child_enable_exception_callback): Purecov comments. - - * hppa-tdep.c: - (Pa_do_strcat_registers_info): New routine. called by - tui/tuiRegs.c:_tuiRegisterFormat to place a register name - and value into a string buffer. Interface may change in - future. Checking this in so that we have something - functional for HP. - (pa_strcat_registers): New routine, called by - pa_do_strcat_registers_info. Does same thing as - pa_print_registers except it takes a stream parameter. - This routine should disappear in future. Checking in - so that we have something functional to give HP - (pa_strcat_fp_reg): New routine, called by - pa_do_strcat_registers_info and pa_strvat_registers - to place a floating point register name and value into - a buffer. This interface may change in future. - Checking in so that we have something functional to give HP. - - * hppa-tdep.c: (Pa_print_fp_reg): Change prototype to match def'n. - (pa_register_look_aside): Fix comment immediately before function. - - * hppa-tdep.c: Changes to better support stack unwinding, - reading and writing registers for HPUX. The HP folks had - an advantage ... access to a runtime architecture spec ;-}. - New includes: Ptrace.h - (internalize_unwinds): Initialize new fields in table. - (read_unwind_info): Entries in the table are now more complex - structures. References of the form ...->table[index].stub_type - are now ...->table[index].stub_unwind.stub_type. - (find_proc_framesize): Added a check for pc == 0. - (rp_saved): Entries in the table are now more complex - structures. References of the form ...->table[index].stub_type - are now ...->table[index].stub_unwind.stub_type. - (frameless_function_invocation): Stub_type becomes - stub_unwind.stub_type - (saved_pc_after_call): Stub_type becomes stub_unwind.stub_type - (hppa_frame_saved_pc): Stub_type becomes stub_unwind.stub_type - (frame_chain_valid): Stub_type becomes stub_unwind.stub_type - (hppa_call_dummy): Stub_type becomes stub_unwind.stub_type - (pa_print_fp_reg): Additional params to call val_print - (in_solib_call_trampoline): Stub_type becomes stub_unwind.stub_type - (in_solib_return_trampoline): Stub_type becomes stub_unwind.stub_typ - (skip_trampoline_code): Additional code to handle external - dyncalls. Also stub_type becomes stub_unwind.stub_type - (hppa_pid_to_exec_file): New funct. FOr HPUX 10.0 and beyond there - is an explicit ptrace request for getting the pathname associated - with a process id (pid). - - * hppa-tdep.c: Fix for gcc compile on HPUX - (hppa_pid_to_exec_file): Remove unwanted param from - call to call_ptrace. Note, hppa_pid_to_exec_file goes - away in subsequent hp snapshots. - - * hppa-tdep.c: Include bfd.h. - include dl.h - (args_for_find_stub): New structure. - (find_unwind_entry): Deal with null input pc value. - (rp_saved): Ditto. - For the import stub, return -24 always. - (hppa_frame_saved_pc): Save old pc value, to detect we are in a loop. - (init_extra_frame_info): Use TARGET_READ_FP. - (frame_chain): Include thread support. - If the caller's pc is zero, we loose and return, just like stack bottom. - Disable warning about being unable to find unwind info. - (hppa_push_arguments): Rewrite. - (hppa_value_returned_from_stack): New function. Handles returning a value - larger that 64 bits, stored on the stack. - (find_stub_with_shl_get): New function. To look up symbols in shlibs. - (cover_find_stub_with_shl_get): New function. Cover routine for - find_stub_with_shl_get to pass to catch_errors. - (hppa_fix_call_dummy): Comment out old stub mechanism. Rewrite using dyncall. - (target_read_fp): New function. - (pa_do_registers_info): Floating point registers start at FP4. - (pa_print_registers): Use FP4_REGNUM instead of 72. - (skip_trampoline_code): Do machine instruction matching for PA2.0. - (setup_d_pid_in_inferior): New function. Exception handling support. - (initialize_hp_cxx_exception_support): Ditto. - (child_enable_exception_callback): Ditto. - (child_get_current_exception_event): Ditto. - - * hppah-nat.c (child_post_wait, child_post_follow_vfork, - child_post_follow_inferior_by_clone): New functions. - - * hppah-nat.c (child_xfer_memory): Make sure the call to ptrace really - fails before we give up. - (hppa_pid_to_str): New function. Format a process id. - (hppa_tid_to_str): New function. Format a thread id. - - * hppah-nat.c (child_xfer_memory): Use xmalloc, not alloca. - (child_post_wait): Delete. - (child_post_follow_vfork): Delete decl of child_ops; delete - large chunks of function -- let it be handled by the normal - mechanism that notices and handles exec events, in resume(). - - * hppah-nat.c (require_notification_of_exec_events): New function; - just notify of exec events, not all events, and just the specified - pid, don't include it's children (10.20 version). - (child_acknowledge_created_inferior): Call new function - require_notification_of_exec_events instead of - require_notification_of_events. - - * hppah-nat.c [!GDB_NATIVE_HPUX_11]: Move HPUX 10.x-specific - support code here from infptrace.c. - - * hppah-nat.c: Removed #define ptrace call_ptrace - replaced all calls to ptrace with calls to call_ptrace - (parent_attach_all): Removed call to ptrace - - * hpread.c (hpread_psymtab_to_symtab_1): Change fflush to - gdb_flush; change stdout to gdb_stdout. - (hpread_psymtab_to_symtab): Change fflush to gdb_flush. - - * hpread.h: New file. Includes all includes, struct defs, defines - from hpread.c. - - * infcmd.c - (attach_command): New local variable, exec_file, added code to - determine exec_file from pid if exec_file is not already known, - call new target operation, target_post_attach -- a no-op unless - on HPUXHPPA - (detach_command): After detaching, do a SOLIB_RESTART - - * infcmd.c (objfiles.h): Fix typo on include line. - - * infcmd.c (run_command): Only call SOLIB_RESTART if it's - defined. - (detach_command): Ditto. - - * infcmd.c: - (run_stack_dummy): Add calls to - disable_watchpoints_before_interactive_call_start and - enable_watchpoints_after_interactive_call_stops - (finish_command): Alter code handling the evaluation and printing - of the target function's return value. - (attach_command): When given a pid, but no exec file, try to determine - the exec file from the process. If the process does not record a - full path name, try to qualify the filename against the source path. - (_initialize_infcmd): Add some verbiage about how to use the attach command - - * infcmd.c: - Include objfiles.h - (run_command): If program has already been started, and decide - to restart it, then kill the target, flush the caches, - call init_wait_for_inferior. Also purge old solib objfiles. - - * infcmd.c: Changed calls to val_print, using a new macro, - SOLIB_RESTART - (run_command): Calls SOLIB_RESTART - (do_registers_info): Changed calls to val_print - - * infcmd.c: Made the symfile.h include preceed the - objfiles.h include. The other ordering caused a - compile problem (incompletely defined types). - - * inferior.h (REQUIRE_DETACH): Fix default definition. - * inftarg.c (child_post_attach): Fix declaration, make static. - (proc_wait): Make globally visible. - (child_insert_fork_catchpoint, etc): Fix return type. - - * inferior.h (STARTUP_WITH_SHELL): New define. - (START_INFERIOR_TRAPS_EXPECTED): New define - - * inferior.h (fork_inferior): Change fifth parameter to be a function - returning void. - - * inferior.h (proc_wait): Declare. - - * inferior.h: - (Require_ATTACH): New macro - (REQUIRE_DETACH): New macro - (detach): Definition is now an extern - (clone_and_follow_inferior): New definition, it's also an extern - - * inferior.h: - (Require_attach): Default definition for require_attach funct - (require_detach): Default definition for require_detach funct - (pre_fork_inferior): New funct decl for function defined in - infptrace.c - (fork_inferior): New parameter in funct decl. - - * inferior.h: - New variable decls: Inferior_ignoring_startup_exec_events, - inferior_ignoring_leading_exec_events -- these variables - are used when processing an exec call. - (CALL_DUMMY_HAS_COMPLETED): New default macro -- for targets - where PC in call dummy implies that call dummy has - completed. Note, that on HPUX this inference does not hold. - - * infptrace.c - (require_notification_of_events): New function - (child_acknowledge_created_inferior): Previously named - hppa_acknowledge_forked_child. Also calling - require_notification_of_events and clearing some semaphore - variables - (child_post_startup_inferior): New function - (child_create_catch_fork_hook): Previously named - hppa_create_catch_fork_hook - (child_create_catch_vfork_hook): Previously named - hppa_create_catch_vfork_hook - (child_has_forked): Previously named hppa_target_has_forked - (child_has_vforked): Previously named hppa_target_has_vforked - (process_wait): Changed to call target_post_wait - (attach): Add call to require_notification_of_events - (child_pid_to_exec_file): New function - (hppa_require_attach): New local variable, pt_status - (hppa_get_process_events): New function - - * infptrace.c (call_ptrace): Simplify control flow. - (proc_wait): Move here from inftarg.c, add target_post_wait call. - - * infptrace.c (call_ptrace): Add some debugging code. - - * infptrace.c (child_pid_to_exec_file): Declare variable. - - * infptrace.c (kill_inferior): Clean up call to proc_wait. - - * infptrace.c: - (Call_ptrace): When the ptrace request is PT_SETTRC, - call ptrace and then call parent_attach_all. - - * infptrace.c: - (Child_has_syscall_event): New function. only applicable - (for now) on HPUX 10.30 and beyond via the ttrace call. - In infptrace.c there is a default operation. - With ttrace, it is possible to tell the kernel to - notify the debugger that the target program is about to make - or return from a syscall. - (child_thread_alive): New function. a default function. - ptrace doesn't support kernel threads. - (hppa_enable_page_protection_events): Defualt function - (hppa_disable_page_protection_events): Default function - - * infptrace.c (child_pid_to_exec_file): Fix number of params to - cal_ptrace call. - - * infptrace.c (hppa_pid_or_tid_to_str): New function. - (hppa_switched_threads): New function. - (hppa_ensure_vforking_parent_remains_stopped): New function. - (hppa_resume_execd_vforking_child_to_get_parent_vfork): New function. - - * infptrace.c: Most of the changes found in infptrace.c should - be moved to hppah-nat.c - (PT_VERSION): A new define - (startup_semaphore_t): A new struct type. it is used to - coordinate the parent and child processes after a fork and - before an exec on HPUX. - (call_ptrace): Changes to determine whether the ptrace - request is for starting the tracing of the target process. - (parent_attach_all): New funct. used on HPUX for coordinating - the parent and child processes after a fork and before and exec. - (hppa_acknowledge_forked_child): New funct. prabably belongs - in hppah-nat.c - (hppa_enable_catch_fork): New funct. probably belongs in - hppah-nat.c - (hppa_disable_catch_fork): New funct. probably belongs in - hppah-nat.c - (hppa_create_catch_fork_hook): New funct. probably belongs in - hppah-nat.c - (hppa_enable_catch_vfork): New funct. probably belongs in - hppah-nat.c - (hppa_disable_catch_vfork): New funct. probably belongs in - hppah-nat.c - (hppa_create_catch_vfork_hook): New funct. probably belongs to - hppah-nat.c - (hppa_target_has_forked): New funct. probably belongs in - hppah-nat.c - (hppa_target_has_vforked): New funct. probably belongs in - hppah-nat.c - (process_wait): New funct. also ifdefed for proc_wait. - (kill_inferior): Call proc_wait rather than wait. this is - pretty hacky. - (pre_fork_inferior): New function. used only by HPUX. - probably should be defined elsewhere. - - * infrun.c (follow_inferior_fork): Only define on HP. - (wait_for_inferior): Only call SOLIB_IN_DYNAMIC_LINKER if we have - shared libraries; restore test of IN_SOLIB_DYNSYM_RESOLVE_CODE - removed by HP. - - * infrun.c (normal_stop): Add a call to the TUIDO - macro just before the annotate_stopped label. This - updates the windows after each program stop. - - * infrun.c (normal_stop): Verify stop_command is non-zero before - dereferencing it (it won't be set if dbx_commands is set). - - * infrun.c (resume): Add #ifdef HPPAHPUX around HPUX-specific - code. - - * infrun.c (resume): Add missing semicolon. - - * infrun.c (wait_for_inferior): Fix syntax error. - - * infrun.c (follow_fork_mode_kind_names): Removed "both" option. - (follow_fork): Added parameters. additional code for handling - following of parent, following of child - (resume): Added code for deciding how to resume in presence of - fork. Additional params to follow_fork call. - - * infrun.c (follow_exec): Ifdef for HPUXHPPA for the moment, the - code in here assumes the existance of the child_ops target - vector. This is incorrect for Solaris. - - * infrun.c (resume): Fixed ifdefs, HPPAHPUX -> HPUXHPPA. - - * infrun.c (wait_for_inferior): Fixed a matching parens problem -- - matching curly brace inside ifdefed code which is not being - compiled. Change local validFlag to be an 'int' rather than a - 'bool' and fixed the corresponding assignment statements. - - * infrun.c: - Two new global variables: Inferior_ignoring_startup_exec_events and - inferior_ignoring_leading_exec_events. - New static variables: Parent_of_vfork_trap_expected_and_ignorable, - step_resume_breakpoint, through_sigtramp_breakpoint, pending_follow, - follow_vfork_when_exec - (follow_inferior_fork): Does what follow_fork did! - (follow_fork): Is now a wrapper function for follow_inferior_fork - (follow_vfork): Is now a wrapper function for follow_inferior_fork - (follow_exec): New function, handles an exec event. - (resume): Remove 3 local variables: Child_pid, has_forked, has_vforked. - move and expand code that tries to follow a fork (i.e. also check - for vfork and exec - (init_wait_for_inferior): Initialize the new structure, pending_follow - (delete_breakpoint_current_contents): When deleting all the breakpoints also - set the breakpoint struct pointer to NULL. - (wait_for_inferior): A number of changes. - The step_resume_breakpoint and through_sigtramp_breakpoint local - variables are now visible in entire module. - Changed name of variable from child_inferior_pid to saved_inferior_pid. - Added several cases to the event processing switch statement: - Target_WAITKIND_FORKED, TARGET_WAITKIND_VFORKED, TARGET_WAITKIND_EXECD. - Also, for TARGET_WAITKIND_STOPPED, check to see if expecting a trap - from the parent of a vfork (ignorable) otherwise break as usual. - When determining the value of 'random_signal' (0 or 1), no longer check for - catchpoints. - When determining how to handle unexpected signals, must now take into - account fork, vfork, and exec. - Change call to PC_IN_CALL_DUMMY to a call to CALL_DUMMY_HAS_COMPLETED - At stop_stepping label, check to see if stopped for fork or - vfork event. - - * infrun.c: New code is related to threads and fork/vfork/exec. - New static variable: Thread_step_needed - Deleted static variable: Parent_of_vfork_trap_expected_and_ignorable - Altered the pending_follow and fork_event structs - (follow_inferior_fork): Before detaching from child and removing - all breakpoints form it -- but only if forking or following - vforks as soon as they happen. Also reset the solib inferior hook. - The same kind of logic applies to hitting step_resume_breakpoints - (calling breakpoint_re_set_thread) and to resetting and inserting - breakpoints. - (follow_exec): Forward decl - (follow_vfork): Check to see if gdb followed the child. If - the child exec'd before gdb saw the parent's vfork event - then call follow_exec. - (follow_exec): If the exec occured after a vfork, then follow - the vfork as well. Do it before following the exec. - Make sure to update breakpoints after and exec - (resume): New local variable, should_resume. - Change parameters in calls to follow_fork, follow_vfork, and - follow_exec. Some changes to the way various pending_follow.kind - situations are handled (there's TARGET_WAITKIND_FORKED, - TARGET_WAITKIND_VFORKED, ARGET_WAITKIND_EXECD. Some additional - conditions to check before deciding to resume the target (i.e. - should_resume=1, stepping?, thread_step_needed?i, regular - resume?) - (proceed): When proceeded at location that does not have a breakpoint - set thread_step_needed=0 to indicate that it is not necessary to - single step thread over breakpoint. SOme additional checks to see - if it is necessary to step thread over breakpoint. - (start_remote): Remove call to clear_proceed_status. - (init_wait_for_inferior): Initialize new fields in fork_event - structure and add a call to clear_proceed_status. - (wait_for_inferior): New local variable: New_thread_event. - Initialize thread_step_needed = 0. - Minor massaging of conditions for adding a new thread to the thread list. - No longer resuming execution after adding a new thread. Let user play with thread first. - Some changes in the way TARGET_WAITKIND_FORKED, ARGET_WAITKIND_VFORKED, - TARGET_WAITKIND_EXECD are handled -- this is all HPUX related. - Simplified TARGET_WAITKIND_STOPPED -- HP previously had some - more complicated code in here. - Moved the code to resume threads to after the large case statement that processes the events. - Additional processing for stop_signal=TARGET_SIGNAL_TRAP. - Cleanup code at process_event_stop_test label. - Set thread_step_needed when processing a BPSTAT_WHAT_SINGLE. - Minor massaging of fork/vfork/exec part of stop_stepping code. - (normal_stop): Minor changes. calling show_and_print_stack_frame. - (xdb_handle_command): New function - (_initialize_infrun): Handle xdb_commands. also handle dbx commands - - * infrun.c: Changes to support following forks, and handling - catchpoints. - (follow_fork_mode_kind_names): New array - (follow_fork): New function. implements the follow parent, - or child functionality. - (resume): Additions to check whether the target process - just forked and decide which process to follow. - (wait_for_inferior): Additional variables (child_inferior_pid, - stepping_through_solib_after_catch, - - stepping_through_solib_catchpoints. - - Altered CURRENTLY_STEPPING macro to check for stepping through - a shared library after hitting a catchpoint. - - Add parameters to save_infrun_state call - - Check for fork and vfork when deciding if event is a random - signal - - When considering stops due to breakpoints, check for - BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK - - Check for stop due to an explicit catchpoint - - When checking for single stepping event, also check for - stepping to get out of dynamic linker's hook after catching - a shlib event - (is_internal_shlib_eventpoint): New funct. check to see if - event type is bp_shlib_event. - (stopped_for_internal_shlib_event): New funct. check for shlib - events - (stopped_for_shlib_catchpoint): New funct. check for catchpoints. - (normal_stop): Additions to check for shlib event - (set_follow_fork_mode_command): New funct. handles the new follow - fork command. - (_initialize_infrun): Additions for follow-fork-mode command. - - * infrun.c: Ifdefing references to - switched_from_inferior_pid for HPUXHPPA. They don't seem - useful for Solaris (i.e. non-HPUX) - - * infrun.c: Included tuiData.h and tuiDataWin.h, ifdefed for TUI. - Included top.h. New static variables: Switched_from_inferior_pid, - number_of_threads_in_syscalls. - (follow_inferior_fork): If there is a step_resume breakpoint - explicitly reset the thread number. - (resume): For TARGET_WAITKIND_VFORKED, removed a check for getting - the vfork event to soon. - (init_wait_for_inferior): Added parameter to call to - breakpoint_init_inferior. Initialize number_of_threads_in_syscalls. - (wait_for_inferior): New local variables: Prev_sal, - enable_hw_watchpoints_after_wait, stepping_through_sigtramp, - stepped_after_stopped_by_watchpoint. Enable watchpoints after a wait. - Added cases for TARGET_WAITKIND_SYSCALL_ENTRY and - TARGET_WAITKIND_SYSCALL_RETURN. - Do additional processing if stop due to breakpoint, but breakpoint is - only valid for a thread other than the one currently running. Additional - parameters to save_infrun_state and load_infrun_state. Some additional - processing for BPSTAT_WHAT_STEP_RESUME. Some additional processing to - handle stepping over a function. - (normal_stop): Added notification of switching threads. ifdefing some - TUI changes and leaving out non-essential TUI changes. - (restore_selected_frame): Ifdefing some TUI changes - (restore_inferior_status): Ifdefing some TUI changes - - * infrun.c: Removed the TUI ifdefs and TUI code. Also removed - include for top.h. HP introduced this. I'm taking it out. - - * inftarg.c (child_detach_from_process): Declare. - (child_attach_to_process): Declare. - (child_stop): Make static to match declaration. - - * inftarg.c (ptrace_him): Change prototype back to return int. - - * inftarg.c (ptrace_me): Remove debug output, pass NULL to - fork_inferior if not HPUX. - - * inftarg.c: - (child_require_attach): New funct prototype and definition - (child_require_detach): New funct prototype and definition - (proc_wait): Funct prototype and definition are enclosed by - proc_wait ifndef - (child_attach_to_process): New function, does most of the - work that child_attach used to do and some additional - work to determine whether gdb is already attached to the - target how to react. - (child_attach): Altered. It's now a wrapper for - child_attach_to_process. - (child_require_attach): New function, called if should attach - even when gdb is already attached to target. - (child_detach_from_process): New function, does most of the - work that child_detach used to do and some additional work - to determine whether gdb is currently attached to the target. - (child_detach): Altered. It's now a wrapper for - child_detach_from_process. - (child_require_detach): New function, called if should try to - detach even when gdb is not attached to target. - (ptrace_him): Calls a new function, target_acknowledge_forked_child. - Currently, target_acknowledge_forked_child, is only defined to - do something for HPUX. - (child_create_inferior): Changed call to fork_inferior. - (child_ops): Added to_require_attach and to_require_detach fields - to the child_ops target ops vector. - - * inftarg.c: - Some hacks for ttrace work - (child_wait): Additional local variables, additional code in - while loop to check for: Process exited, process forked, - process vforked, process execd - (child_thread_alive): John B. seems to think that the kill - call is inapproapriate for HPUX. - (child_attach_to_process): Using strtol rather than atoi. - no longer check for case where there is no known exec file. - (child_post_attach): New function, a default, a no-op - (child_insert_fork_catchpoint): New function, a default, a no-op - (child_remove_fork_catchpoint): New function, a default, a no-op - (child_create_catch_fork_hook): Deleted - (child_create_catch_vfork_hook): Deleted - (child_insert_vfork_catchpoint): New function, a default, a no-op - (child_remove_vfork_catchpoint): New function, a default, a no-op - (child_can_follow_vfork_prior_to_exec ):new function, a default, - a no-op - (child_insert_exec_catchpoint): New function, a default, a no-op - (child_remove_exec_catchpoint): New function, a default, a no-op - (child_has_execd): New function, a default, returns 0 - (child_reported_exec_events_per_exec_call): New function, a - default, returns 1 - (child_has_exited): New function, a default. - (child_core_file_to_sym_file): New function, a default, returns NULL. - (child_ops): Initialize new target_ops vector fields to the - child* functions. - * infptrace.c: - (Call_ptrace): For HPUX, handle additional requests: Pt_CONTIN1, - PT_STEP1. - (require_notification_of_events): Add several signals to the - set of events requiring notification: Ptrace_SIGNAL, - PTRACE_EXEC, PTRACE_FORK, PTRACE_VFORK - (child_acknowledge_created_inferior): This function is only - defined if CHILD_ACKNOWLEDGE_CREATED_INFERIOR is defined. - (child_post_startup_inferior): Function is only defined if - CHILD_POST_STARTUP_INFERIOR is defiend. Also, now call - require_notification_of_events. - (child_create_catch_fork_hook): Deleted - (child_create_catch_vfork_hook): Deleted - (child_insert_fork_catchpoint): New function - (child_remove_fork_catchpoint): New function - (child_insert_vfork_catchpoint): New function - (child_remove_vfork_catchpoint): New function - (child_has_forked): Now enclosed by a CHILD_HAS_FORKED ifdef - (child_has_vforked): Now enclosed by CHILD_HAS_VFORKED ifdef - (child_can_follow_vfork_prior_to_exec): New function - (child_insert_exec_catchpoint): New function - (attach): Removed call to require_notification_of_events - (child_post_attach): New function, call to - require_notification_of_events moved here. - (child_pid_to_exec_file): New enclosed by CHILD_PID_TO_EXEC_FILE ifdef - introduced the concept of a saved_inferior_pid - (hppa_require_attach): Add some code to decide if gdb is already - attached to process. Can not figure this out via a ptrace call. - (hppa_insert_hw_watchpoint): New function - (hppa_remove_hw_watchpoint): New function - - * inftarg.c: - (child_attach_to_process): Change position in file - (child_detach_from_process): Change position in file - - * inftarg.c: - (child_attach_to_process): Changed parameter to child_wait call - - * inftarg.c: - (child_post_wait): New function declaration and definition - (ptrace_him): - - change return value to a void. - - change target_acknowledge_forked_child call to - target_acknowledge_created_inferior - - call target_post_startup_inferior rather than returning pid. - (child_attach_to_process): Change param name, fail_if_already_attached - -> after_fork. - Invert a couple of if-then-else statments. - Use REQUIRE_ATTACH macro - (child_attach): Change params in child_attach_to_process call - (child_require_attach): Change params in child_attach_to_process call - (child_detach_to_process): Change param name, - fail_if_already_attached -> after_fork. - Invert a couple of if-then-else statments. - Use REQUIRE_DETACH macro - (child_detach): Change params in child_detach_from_process call - (child_require_detach): Change params in child_detach_from_process - call - (child_post_startup_inferior): New function - (child_acknowledge_created_inferior): New function - (child_clone_and_follow_inferior): New function - (child_post_follow_inferior_by_clone): New function - (child_create_catch_fork_hook): New function - (child_create_catch_vfork_hook): New function - (child_has_forked): New function - (child_has_vforked): New function - (child_post_follow_vfork): New function - (child_stop): No longer a static function - (child_pid_to_exec_file): New function - - * inftarg.c: - (child_wait): Child_pid becomes related pid. return pid - rather than inferior_pid. Changes are in code handling fork - and vfork - - * inftarg.c: - Include gdb_stat.h and sys/unistd.h - (child_wait): New local variables. Check for live threads. - Check for syscall events - (child_thread_alive): No longer a static funct. - (ptrace_him): Remove some code inserted in snap3 - (child_create_inferior): Added a bunch of code to handle a - bad interaction between start-up-with-shell and the HP - catch-fork/catch-exec logic. I am ifdefing this for - HPUXHPPA for now. - (child_has_syscall_event): New default target_ops function - (child_enable_exception_callback): New default target_ops function - (child_get_current_exception_event): New default target_ops function - (child_ops): 3 new fields - - * inftarg.c: Remove HPUX_SNAP1 and HPUX_SNAP2 ifdefs - - * inftarg.c: Reverted previous change. - - * infttrace.c (hppa_remove_hw_watchpoint): Fix check for write - access hardware watchpoint. - - * infttrace.c (proc_wait): Rename from proc_wait. - - * infttrace.c (require_notification_of_exec_events): New function; - just notify of exec events, not all events, and just the specified - pid, don't include it's children. - (child_acknowledge_created_inferior): Call new function - require_notification_of_exec_events instead of - require_notification_of_events. - (child_post_startup_inferior): Call require_notification_of_events - - * infttrace.c: Changed all references to boolean to int. - Changed all references to TRUE and FALSE to 1 and 0. - - * irix5-nat.c (symbol_add_stub): Add params to call to - symbol_file_add. - - * jv-lang.c (get_dynamics_objfile): Add 2 more parameters to call - to allocate_objfile. - - * main.c (fputs_unfiltered): Changes to prevent cursor form - jumping around in the TUI. Altered where tuiTermUnsetup and - tuiTermSetup are called - - * main.c (fputs_unfiltered): Changed function so that it - checks to see if output is to a string buffer or to a - FILE stream and does the correct action (i.e. strcat or - fputs). Fixed params for fputs call. - - * main.c (fputs_unfiltered): Don't try to call the TUI's - CommandCharCount functions when the TUI isn't enabled. - - * main.c (fputs_unfiltered): Change FILE to GDB_FILE. - - * main.c (main): If the user gives the --version or --help flags, - disable the TUI. - - * main.c (tui_version, xdb_commands, dbx_commands): New variables. - (main): New command line arguments --tui, --xdb, --dbx; add call - to tyiCleanUp via tuiDo to main loop. - (fputs_unfiltered): Tui related changes. - - * main.c: Define 2 new global variables, gdb_stdout and gdb_stderr - of type GDB_FILE. - (main): Allocate space for and initialize gdb_stdout and gdb_stdin. - - * objfiles.c (find_pc_sect_section): Make end condition be less - than s->endaddr, not less than or equal to s->endaddr. - - * objfiles.c: - (allocate_objfile): 2 new parameters: User_loaded and is_solib. - When appropriate, record in the object file that it is user loaded. - The run command can use this information to purge object file - entries associated with the old inferior and keep user loaded - object files loaded via the add-symbol-file command. - (objfile_purge_solibs): New function. deletes all objectfile entries - that are not explicitly loaded by the user. - - * objfiles.c: - (objfile_relocate): Check for LOC_INDIRECT - (find_pc_sect_section): Change condition from - pc < s->endaddr to pc <= s->endaddr - - * objfiles.h: - New variables: User_loaded and is_solib - (OBJF_SHARED): New macro. used to distinguish objfile for - shared library from "vanilla" objfile. - (allocate_objfile): Add new parameters to function decl. - (objfile_purge_solibs): New function decl. - - * objfiles.h: Add some typedefs: Importentry, ExportEntry. - Add some new variables: Import_list, import_list_size, - export_list, export_list_size - - * osfsolib.c: - (symbol_add_stub): Added params to call to symbol_file_add - - * pa/hpux1020.mh (NATDEPFILES): Add corelow.o, symbol table and - solib files. - - * pa/hpux1100.mh (NAT_FILE): Use nm-hppah11.h. - (NATDEPFILES): Add symbol table and solib files. - - * pa/nm-hppah11.h: New file, HPUX11-only definitions. - - * pa/tm-hppa.h (proc_wait): Remove decl and macro. - - * parse.c (write_dollar_variable): Handle cases in which variables - besides the debugger ones start with $ and $$. - (parse_nested_classes_for_hpacc): New function. Parse a string that - is possibly a namespace / nested class specification. - (find_template_name_end): New function. - - * procfs.c: - (procfs_init_inferior): Return value is now a void. - - * procfs.c (procfs_ops): Initializing new target ops vector fields. see list below. - - * procfs.c: - (procfs_ops): Adding new target_ops vector fields and - removing a few. see list below - - * procfs.c: Added new fields to procfs_ops. - Necessary since we still have oldstyle initialization in - this file - - * pyr-tdep.c (pyr_do_registers_info): Change stdout to gdb_stdout. - (frame_locals_address): Change stderr to gdb_stderr. - (frame_args_addr): Ditto. - - * pyr-xdep.c (fetch_inferior_registers): Change stderr to - gdb_stderr. - - * serial.c (serial_close): Call gdb_fclose, not fclose on a - GDB_FILE. - - * serial.c (serial_logchar): Change chtype to ch_type. sigh. - - * solib.c (look_for_base): The parameter to file must be - of type FILE *. So cast exec_bfd -> iostream in the call - to fileno as a FILE *, not a GDB_FILE *. This will work because - exec_bfd -> iostream is declared and given a value in bdf and - bfd will continue to use FILE rather than GDB_FILE. - - * solib.c: - (solib_add): Remove references to exec_ops. - - * solib.c: - (solib_add): Update exec_ops.to_sections - - * solib.c: - (symbol_add_stub): Added params to call to symbol_file_add - - * solib.h: - (SOLIB_REMOVE_INFERIOR_HOOK): New macro. defined to 0. - functionality not implemented for this target. - - * solib.h: Added macro definitions. These macros generate - error messages for solaris?? - (SOLIB_CREATE_CATCH_LOAD_HOOK) - (SOLIB_CREATE_CATCH_UNLOAD_HOOK) - (SOLIB_HAVE_LOAD_EVENT) - (SOLIB_LOADED_LIBRARY_PATHNAME) - (SOLIB_HAVE_UNLOAD_EVENT) - (SOLIB_UNLOADED_LIBRARY_PATHNAME) - (SOLIB_IN_DYNAMIC_LINKER) - (SOLIB_RESTART) - - * somread.c (is_in_import_list): Ditto. - - * somread.c (som_symfile_read): Added some comments - - * somread.c (som_symfile_read): Read in import and export lists. - (som_symtab_read): Change test for dynamic executable. - (is_in_import_list): New function. Check if a given symbol name - is in the import list. - (init_import_symbols): New function. Read in and initialize the - som import list. - (init_export_symbols): New function. Read in and initialize the - som export list. - - * somread.c: - (som_symfile_read): Fix missing comment delimiters - - * somsolib.c (DLD_FLAGS_MAPPRIVATE): New macro. - Define bit of __dld_flags in HP-UX a.out files. - (DLD_FLAGS_HOOKVALID): Ditto. - (DLD_FLAGS_LISTVALID): Ditto. - (DLD_FLAGS_BOR_ENABLE): Ditto. - (som_solib_total_st_size): Cumulative size in bytes of the - symbol tables of all shared objects on the so_list_head list. - (som_solib_st_size_threshhold_exceeded): Threshold for adding symbols - for shlibs. - (som_solib_sizeof_symbol_table): New function. Computes size of - symbol table for a shlib. - (som_solib_load_symbols): New function. Load symbols from shlib. - (som_solib_add): Detect if __dld_list is not valid. - Record main program's symbol table size. - Load symbols if called from command line. - Keep threshold into account when loading shlib symbols. - (som_solib_create_inferior_hook): Use dld_flags macros. - (som_sharedlibrary_info_command): Let user know if symbols were - not loaded. - (som_solib_restart): Discard all the shlibs descriptors. - (_initialize_som_solib): Chenge help message for auto-solib-add - command. - Set threshold for symbol table to 50 megabytes. - - * somsolib.c (_initialize_som_solib): Added call to som_solib_restart. - (som_solib_restart): New function - (som_solib_in_dynamic_linker): New function - (som_solib_desire_dynamic_linker_symbols): New function - (som_solib_unloaded_library_pathname): New function - (som_solib_loaded_library_pathname): New function - (som_solib_library_pathname): New function - (som_solib_have_unload_event): New function - (som_solib_have_load_event): New function - (som_solib_create_catch_unload_hook): New function - (som_solib_create_catch_load_hook): New function - (som_solib_create_inferior_hook): Rewritten - dld_cache: New struct - addr_and_unwind_t: New struct - (find_unwind_entry) added prototype - - * somsolib.c (som_solib_create_inferior_hook): Introduce new local - msymbol2 and change some msymbol's to msymbol2's -- was clobbering - msymbol, passing a NULL to lookup_minimal_symbol_solib_trampoline, - and ultimately core dumping with a SEGV. - - * somsolib.c: - Include assert.h - (som_solib_mapped_entry): Additional comments for text_addr, - text_link_addr, text_end, and tsd_start_addr fields. Commenting - out 2 tsd fields, __data_start and __data_end. - (som_solib_add_solib_objfile): Add params to calls to symbol_file_add. - Add some code for distinguishing between a shared library and other - objfiles. This appears to be a prelude to thread local storage. - (som_solib_load_symbols): Changes to printf statement - enclosed by SOLIB_DEBUG ifdef. - (som_solib_add): Change comment to correctly specify path - to end.o -- /opt/langtools/lib/end.o. changes to printf statement - enclosed by SOLIB_DEBUG ifdef. - Removed several SOLIB_DEBUG ifdefs and the associated printfs. - Add code to find the start address for the object file's thread - local storage - (som_solib_create_inferior_hook): Fix warning messages use correct - path to end.o -- /opt/langtools/lib/end.o. Change control flow. - No longer user early returns from function is cases of error. - (reset_inferior_pid): New function - (som_solib_remove_inferior_hook): New function - (so_lib_thread_start_addr): New function. used for tsd. - - * somsolib.c: Removed references to ASSERT macro. - - * somsolib.c: Add debugging macro. - (struct som_solib_mapped_entry): Add new field tsd_start_addr. - (struct so_list): Added new field solib_addr. - (som_solib_add_solib_objfile): New function. - (som_solib_load_symbols): Rewritten. - (som_solib_add): Make sure we don't load the symbols in if the - threshold was exceeded. - (som_solib_get_solib_by_pc): New function. Return the address of - handle of the shared library. - (som_solib_restart): Disable breakpoints at restart. - (_initialize_som_solib): Set threshold to 100 megabytes. - - * somsolib.c: Add include of fcntl.h so that O_RDONLY is defined. - - * somsolib.h (DISABLE_UNSETTABLE_BREAK): New macro. - (PC_SOLIB): New macro. - - * somsolib.h: - (SOLIB_CREATE_CATCH_LOAD_HOOK): Define - (SOLIB_CREATE_CATCH_UNLOAD_HOOK): Define - (SOLIB_HAVE_LOAD_EVENT): Define - (SOLIB_LOADED_LIBRARY_PATHNAME): Define - (SOLIB_HAVE_UNLOAD_EVENT): Define - (SOLIB_UNLOADED_LIBRARY_PATHNAME): Define - (SOLIB_IN_DYNAMIC_LINKER): Define - (SOLIB_RESTART): Define - - * somsolib.h: - (SOLIB_REMOVE_INFERIOR_HOOK): New macro. defined to use - som_solib_remove_inferior_hook. - - * somsolib.h: - (som_solib_create_catch_load_hook) - (som_solib_create_catch_unload_hook) - (som_solib_have_load_event) - (som_solib_loaded_library_pathname) - (som_solib_have_unload_event) - (som_solib_unloaded_library_pathname) - (som_solib_in_dynamic_linker) - Fix prototypes to use type names, not parameter names. - - * source.c (find_source_lines): Make non static. - (open_source_file): Ditto. - (source_full_path_of): New function. - (print_source_lines): Rename to print_source_lines_base and make - static; formatting. - (print_source_lines): New function. - (forward_search_command): Tui changes. - (reverse_search_command): Tui changes. - (_initialize_source): Add xdb and dbx compatibility commands. - - * source.c (list_command): Handle case of odd number of source - lines to display. - - * source.c: - (source_full_path_of): New function. file was overlooked - in merge ;-/. - - * stack.c (func_command): Make high bound be <, not <=. - - * stack.c (_initialize_stack): For the backtrace command, delete - the help line about usage, since this has to be a valid help - message for the 'where' command too. - - * stack.c (current_frame_command): Add a check for the - existance of a stack. If there is no stack produce an - error message and exit. - - * stack.c (down_silently_base, up_silently_base, - args_plus_locals_info, print_frame_info_base, - print_stack_frame_base, print_stack_frame_base_stub): Declare. - (print_frame_local_vars): Add'l parameter. - (print_stack_frame_stub): New version created, old version renamed - to show_and_print_stack_frame_base_stub. - (print_stack_frame_base_stub, print_only_stack_frame_stub, - show_and_print_stack_frame, print_only_stack_frame, - stack_publish_stopped_with_no_frame, print_frame_info, - show_stack_frame, backtrace_full_command, args_plus_locals_info, - select_and_print_frame, select_and_maybe_print_frame, - current_frame_command, func_command): New functions. - (backtrace_command): New function, old renamed to - backtrace_command_1. - (print_block_frame_locals, print_frame_local_vars): Additional - parameter, number of tabs. - (up_silently_command): New function, old renamed to - up_silently_command_base. - (down_silently_command): New function, old renamed to - down_silently_base. - (_initialize_stack): Register new commands based on values of - xdb_commands and dbx_commands variables. - - * stack.c (func_command): Make high bound be <, not <=. - - * stack.c (parse_frame_specification): Fix prototype to match - function definition. - (show_and_print_stack_frame_stub): Fix name. - (select_and_print_frame): Change uncaught tuiDO call. - - * stack.c (up_silent_base): Rename from up_silently_command_base. - - * symfile.c (symbol_file_command): Only call SOLIB_RESTART if it's - defined. - - * symfile.c (add_psymbol_with_dem_name_to_list): New function. - Adds a symbol with a long value to a psymtab. Differs from - add_psymbol_to_list in taking both a mangled and a demangled name. - - * symfile.c (compare_psymbols): Call strcmp directly, instead of - using macro. - - * symfile.c (symbol_file_add): Reindent portions. - (symbol_file_command): Add call to tuiDo. - - * symfile.c (symbol_file_command): Only call SOLIB_RESTART if it's - defined. - - * symfile.c (symfile_bfd_open): Add code to call PXDB on hpux, if - the file has not already been processed by pxdb. - Added define USE_PXDB. - - * symfile.c (symfile_bfd_open): Change parenthesis positioning - around call to hpread_pxdb_check. - - * symfile.c (symfile_bfd_open): Make not static. - (RESET_HP_UX_GLOBALS): New macro. Resets globals when new symbol - file loaded. - (USE_PXDB): Not needed. Removed. - (symbol_file_add): Add HP specific code to deal with pxdb. - (symbol_file_command): Reset HP specific globals if new symbol file - loaded. - (symfile_bfd_open): Comment out checking for pxdb. - (reread_symbols): Reset HP specific globals. - - * symfile.c (symfile_bfd_open): Uncomment hpus specific code. - - * symfile.c: - (symbol_file_add): Add user_loaded and is_solib parameters. - fixed number of parameters in call to allocate_objfile - (symbol_file_command): Added call to SOLIB_RESTART macro. - fixed number of parameters in calls to symbol_file_add. - (add_symbol_file_command): Fixed number of parameters in calls to - symbol_file_add. - - * symfile.c: Added prototype for hpread_pxdb_check. - - * symfile.c: Changed HPUX_SNAP1 ifdef to HPUXHPPA. enclosed calls to - RESET_HP_UX_GLOBALS with an HPUXHPPA ifdef - - * symfile.h (symfile_bfd_open): Add protptype. - - * symfile.h: Add prototype for add_psymbol_with_dem_name_to_list. - - * symfile.h: Clarify purpose of auto_solib_add. - - * symmisc.c (maintenance_print_symbols): Call gdb_fclose, not - fclose on a GDB_FILE* during cleanup. - (maintenance_print_psymbols): Call gdb_fclose, not fclose on a - GDB_FILE* during cleanup. - (maintenance_print_msymbols): Call gdb_fclose, not fclose on a - GDB_FILE* during cleanup. - - * symmisc.c (maintenance_print_symbols): Gdb_fclose now takes a - GDB_FILE ** parameter. Fix the local GDB_FILE variables and the - call to make_cleanup. - (maintenance_print_psymbols): Ditto - (maintenance_print_msymbols): Ditto - - * symmisc.c (print_objfile_statistics): Close quotes in - output strings. - - * symmisc.c: - (Print_symbol): Add LOC_INDIRECT to switch statement - (print_partial_symbols): Add LOC_INDIRECT to switch statement - - * symtab.c (find_pc_sect_psymtab): High bounds should be <, not <=. - (find_pc_sect_symtab): Ditto. - - * symtab.c (hp_som_som_object_present): New flag to indicate HP - compiled code. - (find_pc_sect_psymtab): Change tests to make sure we are checking - the texthigh adress as well. - (lookup_transparent_type): New function. Look up a type name - in the struct_namespace. The type returned must not be opaque. - (find_pc_sect_symtab): Make sure we check the address 'pc' itself, - too. - (find_addr_symbol): Prepare to handle LOC_INDIRECT address class, but - leave it commented out. - (find_pc_sect_line): Return correct information if pc is in import - or export stub (trampoline). - (decode_line_1): Skip two chars, if they are '$$'. Like for HP's - $$dyncall. Handle cases in which varaible and function names can start - with $. - (overload_list_add_symbol): If cannot demangle name, use it as is. - Free string after use. - (make_symbol_overload_list): Initialize oload_name to NULL and - oload_name_len to 0. If demangle not successful, use name as it is. - Free string after use. - - * symtab.c (lookup_symbol): Changed call to find_pc_sect_symtab, - to the original find_pc_symtab, in HP added fragment. - - * symtab.c (lookup_symbol): Change HPUX_SNAP1 ifdef to a HPUXHPPA ifdef - - * symtab.c (lookup_symbol): Ifdef the searching of symbol in the - minimal symbol tables, for hpux we move this check at the end - of the function. - Before we error out if symbol is not found in the symtab, look - in the statics. - Before erroring out if static symbol not found look in the globals. - - * symtab.c (lookup_symbol): Return symbol as soon as found. - (decode_line_1): Check whether we have a conditional break. Temporarily - remove it from the line, to not confure perenthesis checking. - Handle namespaces. - (overload_list_add_symbol): New function. Overload - resolution support. - (make_symbol_overload_list): Ditto. - - * symtab.c: - (find_template_name_end): New prototype decl. - (lookup_symbol): When a global or static symbol shows up in the - psymtab table, but not the symtab table, tell the user that - the symbol may be an inlined function or a template function and - provide some guidance to the user about how to more fully - specify the symbol. - (lookup_transparent_type): When a global or static symbol shows up - in the psymtab table, but not the symtab table, tell the user that - the symbol may be an inlined function or a template function and - provide some guidance to the user about how to more fully - specify the symbol. - (decode_line_1): Handle template function specification when decoding a - line. May need to be ifdefed for HP's aCC? - (_initialize_symtab): Handle dbx commands. - - * symtab.h (address_class): Add new address calss for - LOC_THREAD_LOCAL_STATIC and LOC_INDIRECT. - (lookup_transparent_type): Add prototype. - (exception_event_kind): New enum for exception catchpoints. - (exception_event_record): New structure for exception catchpoints. - (CURRENT_EXCEPTION_KIND): New macro. - (CURRENT_EXCEPTION_CATCH_SAL): New macro. - (CURRENT_EXCEPTION_CATCH_LINE): New macro. - (CURRENT_EXCEPTION_CATCH_FILE): New macro. - (CURRENT_EXCEPTION_CATCH_PC): New macro. - (CURRENT_EXCEPTION_THROW_SAL): New macro. - (CURRENT_EXCEPTION_THROW_LINE): New macro. - (CURRENT_EXCEPTION_THROW_FILE) new macro.: - (Current_EXCEPTION_THROW_PC): New macro. - - * symtab.h(make_symbol_overload_list): Add prototype. - - * symtab.h: - (symbol_file_add): Add new params to function decl. - - * target.c (cleanup_target): Changed casting of default functions for - to_has_forked, to_has_vforked, to_pid_to_exec_file to get rid of - warnings. - - * target.c (cleanup_target): Changed the default functions for - to_pid_to_exec_file and to_core_file_to_sym_file - - * target.c (cleanup_target): Fixed PARAMS for to_has_syscall_event - - * target.c (cleanup_target): Syntax error, mismatched paranthesis. - - * target.c: - (Default_clone_and_follow_inferior): New funct prototype declaration - and function definition - (dummy_target): More target_ops vector changes for HPUX - new fields. ifdefed for HPUX_SNAP2. New fields are - to_post_wait, to_post_startup_inferior - to_acknowledge_created_inferior, to_clone_and_follow_inferior, - to_post_follow_inferior_by_clone, to_create_catch_fork_hook, - to_create_catch_vfork_hook, to_has_forked, to_has_vforked, - to_post_follow_vfork, to_pid_to_exec_file - (de_fault): Add new HPUX specific target_ops operations to - the de_fault macro - (INHERIT): Add new HPUX specific target_ops operations to the - INHERIT macro - (find_default_clone_and_follow_inferior): New funct definition - (debug_to_post_wait): New funct - (debug_to_post_startup_inferior): New funct - (debug_to_acknowledge_created_inferior): New funct - (debug_to_clone_and_follow_inferior): New funct - (debug_to_post_follow_inferior_by_clone): New funct - (debug_to_create_catch_fork_hook): New funct - (debug_to_create_catch_vfork_hook): New funct - (debug_to_has_forked): New funct - (debug_to_has_vforked): New funct - (debug_to_post_follow_vfork): New funct - (setup_target_debug): Initialize new target_ops vector fields. - - * target.c: - (Cleanup_target): Fixed the return type on a few of the - default function values. - - * target.c: - (Dummy_target): Add 3 new fields - (nosupport_runtime): New function, used in cleanup_target - (cleanup_target): Changes in the de_fault macro, both to - accomodate the new target_ops vector fields and to use - more accurate default functions. - (update_current_target): Add new target_ops vector fields to the - INHERIT macro - (generic_mourn_inferior): The call to breakpoint_init_inferior now takes a - parameter - (normal_pid_to_str): Adding a \0 to the end of buf. - (debug_to_has_syscall_event): New func - (debug_to_enable_exception_callback): New func - (debug_to_get_current_exception_event): New func - (setup_target_debug): Initialize the 3 new target_ops vector fields - - * target.c: - (Struct signals): Fix message associated with SIGRETRACT. - - * target.c: - (Dummy_target): Fix syntax error - (cleanup_target): Changed the default values for the new - target_ops vector fields. HP folks inappropriately set - most of them to noprocess(). They should be a mixture - of ignore() and return_zero(). - - * target.c: - (Dummy_target): Add new target_ops vector fields and their initializations - (cleanup_target): Added new new target_ops vector fields to the de_fault - macro definition. - (update_current_target): Added new new target_ops vector fields to the INHERIT - macro definition - (return_one): New function, used by the de_fault macro - (debug_to_post_attach): New function - (debug_to_wait): Added new cases: Target_WAITKIND_FORKED, TARGET_WAITKIND_VFORKED, - TARGET_WAITKIND_EXECD - (debug_to_insert_fork_catchpoint): New function - (debug_to_remove_fork_catchpoint): New function - (debug_to_insert_vfork_catchpoint): New function - (debug_to_remove_vfork_catchpoint): New function - (debug_to_can_follow_vfork_prior_to_exec): New function - (debug_to_insert_exec_catchpoint): New function - (debug_to_remove_exec_catchpoint): New function - (debug_to_core_file_to_sym_file): New function - (setup_target_debug): Give new fields in current_target target_ops vector values. - - * target.c: Hp merge, 4/15/98 snapshot - There are new target_ops fields that pertain only - to HPUX. All the changes relate to this. First, - new fields are added to the dummy_target target_ops - vector: To_require_attach, to_require_detach. - - * target.c: Remove HPUX_SNAP1 and HPUX_SNAP2 ifdefs - - * thread.c (info_threads_command): Call print_only_stack_frame - instead of print_stack_frame. - (_initialize_thread): Make t an alias for thread only if - xdb_commands is not set. - - * thread.c (thread_command): If no arguments, don't generate an - error, instead tell the user which thread is current. - (info_threads_commands): Don't lose the users position within the - current thread -- remember it and then restore it. - - * thread.c: - (struct thread_info): Add stepping_through_sigtramp field - (add_thread): Initialize stepping_through_sigtramp field - (load_infrun_state): Add stepping_through_sigtramp param and - make sure it gets assigned a value. - (save_infrun_state): Add stepping_through_sigtramp param and - make sure that the value gets saved. - (info_threads_command): Ifdefing some local variables and - code for HPUXHPPA. HP folks want print the tid rather than pid? - Also, looks like the HP folks solved the same thread switching - problem that 4.17 solves. Taking 4.17. - (restore_current_thread): Print out the current frame after - switching threads. - (thread_apply_all_command): Ifdefing a print statement for - HPUXHPPA. The HP folks want to print out a tid rather than pid? - (thread_apply_command): Ifdefing a print statement for - HPUXHPPA. The HP folks want to print out a tid rather than pid? - (thread_command): Decided not to take HP change. - - * thread.c: Fixing gdb core dump problem causing many testsuite - failures. - (add_thread): Remove call to bpstat_clear, initialize - tp->stepping_through_solib_catchpoints = NULL; - - * thread.c: Changes for catchpoints, shared libaries, - (thread_info): Additional fields in the thread_info struct - for stepping_through_solib_after_catch and - stepping_through_solib_catchpoints. - (add_thread): Initialize the new thread_info fields. - (load_infrun_state): Additional parameters for handling - catchpoints and shared libraries. - (save_infrun_state): Additional parameters for handling - catchpoints and shared libraries. - - * top.c (command_loop): Initialize space_at_cmd_start to 0. - (set_prompt): New function. - (togglelist, stoplist): New command lists. - (command_loop): Tui changes -- paranoia to make sure - insert mode is off when not editing. - (quit_force): Clean up tui on exit. - (init_main): Make definition of info status command dependent upon - dbx mode not being set. - (fputs_unfiltered_hook): Changed stream parameter from FILE - to GDB_FILE - (flush_hook): Changed stream parameter from FILE to GDB_FILE - - * top.h (set_prompt): Declare. - - * typeprint.c (whatis_exp): Decide real runtime type. For the vtable - case. - - * utils.c (query): Changes to prevent cursor from jumping around in the - TUI. Call tuiBufferGetc explicitly, rather than passing it - into tuiDo. The tuiDo function does some additional work - that is inappropriate when handling queries. - (GDB_FILE_ISATTY): New macro that takes a GDB_FILE param and - determines whether or not it's using a tty. - (gdb_file_isatty); called by the GDB_FILE_ISATTY macro. Does - the actual work - (init_page_info): Call GDB_FILE_ISATTY rather than ISATTY - (print_spaces): Fix parameter to fputc. fix call to - gdb_file_adjust_strbuf. - (gdb_file_init_astring): Fix parameter to xmalloc - (gdb_file_deallocate): New function to deallocate - a GDB_FILE object and possibly a string buffer - (gdb_file_init_astring): Initialize buffer as the empty - string. Indent GNU style. - (gdb_fopen): Gdb_fopen is called if the GDB_FILE object is - actually afile rather than astring. The routine now allocates space - for a GDB_FILE object and initializes its fields in addition to - performing an fopen. - (gdb_flush): Fix the parameter passed into fflush. It's now - stream->ts_filestream. - (gdb_fclose): Pass in an object of type GDB_FILE **. Fix parameter - to fclose. It's now tmpstream->ts_filestream. Make sure to free - the GDB_FILE object and set the GDB_FILE * object to NULL. - (gdb_adjust_strbuf): New function. Determine if the current - ts_strbuf field contains sufficient space to concatenate a string - of length n on the end. If not, then reallocate the ts_strbuf. - (print_spaces): Check to see if the GDB_FILE is afile or - astring. If it is astring, then adjust the size of the ts_strbuf - field and concatenate the correct number of spaces onto the end of - the buffer. Otherwise continue to use fputc. - (gdb_file_get_strbuf): New function. return a ptr to the ts_strbuf - field in a GDB_FILE object. - (gdb_file_init_astring): New function to allocate space for and - initialize a GDB_FILE object when it is an astring. - (set_width): Declare it. - (pagination_enabled): Define it. - (query): Tui changes. - (init_page_info, set_width): New functions. - (set_width_command): Call set_width. - (_initialize_utils): Replace termcap stuff with call to - init_page_info; if xdb_commands set, define am and sm commands; - define pagination as a set/show command. - (vfprintf_maybe_filtered): Change FILE to GDB_FILE. - (fputs_maybe_filtered): Ditto. - (print_spaces): Ditto. - (gdb_printchar): Ditto. - (gdb_flush): Ditto. - (fputs_filtered): Ditto. - (vfprintf_filtered): Ditto. - (vfprintf_unfiltered): Ditto. - (fprintf_filtered): Ditto. - (fprintf_unfiltered): Ditto. - (fprintfi_filtered): Ditto. - (print_spaces_filtered): Ditto. - (fprintf_symbol_filtered): Ditto. - (gdb_fclose): New function. - - * valops.c (call_function_by_hand): Assign to param_type only - if function has parameters. - - * valops.c (call_function_by_hand): Ifdef the - HP_COMPILED_TARGET stuff. - (value_arg_coerce): Ditto. - - * valops.c (call_function_by_hand): Make sure param_type is - initialized to NULL. - - * valops.c (find_rt_vbase_offset): Add parameter to value_at. - (value_rtti_type): Ditto. - (value_full_object): Ditto. - - * valops.c (search_struct_field_aux): Fixed mismatching parenths - - * valops.c (search_struct_field_aux): Make sure TYPE_TAG_NAME - is not null before copying it. - - - * valops.c (search_struct_field_aux): Set found_class_name to null - if class has no name (anon unions case). Adjust base_addr - computation. - - * valops.c (value_arg_coerce): Change final arg to int. - - * valops.c (value_arg_coerce): Remove the conditional on HP - compiled target, for doing coercion of float to double. Removed - third parameter, using_gcc. - (call_function_by_hand): Do not use HP_COMPILED_TARGET, just - use the gcc_compiled variable. - - * valops.c (value_cast): Take case of the enclosing_type and - pointer_to_offset fields. - (value_at): Use VALUE_CONTENTS_ALL_RAW - (value_fetch_lazy): Ditto - (value_assign): Handle enclosing_type, embedded_offset and - pointed_to_offset fields. - (value_repeat): Use VALUE_CONTENTS_ALL_RAW and VALUE_ENCLOSING_TYPE. - (value_ind): Set enclosing_type and embedded_offset correctly, - for a pointer value being dereferenced. Target memory bytes - corresponding to the size of the enclosing type are retreived. - (value_addr): Handle enclosing_type and pointed_to_offset. - (value_push): Use VALUE_CONTENTS_ALL and VALUE_ENCLOSING_TYPE. - (value_arg_coerce): Coerce floats to doubles only if gcc was not - used to compile the target. - (call_function_by_hand): Handle pointers to functions as paramters. - (value_array): Use VALUE_CONTENTS_ALL and VALUE_ENCLOSING_TYPE. - (search_struct_method): Produce more informative error message. - (find_rt_vbase_offset): Deal with negative offsets. - (value_find_oload_method_list): New function. Return the list of - overloaded methods of a specified name. - (find_method_list): New function. Search through the methods of an - object (and its bases) to find a specified method. - (value_full_object): New function. Given a value, check its real - run-time type. - (value_rtti_target_type): New function. Given a pointer value V, find - the real (RTTI) type of the object it points to. - (value_rtti_type): New function. Find the real run-time type of a - value using RTTI. - - * valops.c: Include gdbcmd.h - Set global overload_resolution to 0. - (find_function_in_inferior): Modify error message. - (value_allocate_space_in_inferior): Modify error message. - (value_cast): Deal with HP/aCC peculiarities. - (value_of_variable): Use SYMBOL_SOURCE_NAME instead of SYMBOL_NAME. - (value_addr): Modify address value by adding the embedded offset. - (value_ind): Modify the address of the object by the pointed_to_offset. - (call_function_by_hand): Do not do any extra alignment if not needed. - Fetch the return value from the stack rather then from the register, - for the hppa architecture. - (search_struct_field): Rewritten. Now this function uses - search_struct_field_aux to do all the work. - (search_struct_field_aux): New function. This is the old - search_struct_field rewritten. - (find_rt_vbase_offset): Give error if virtual table pointer is not good. - (find_overload_match): New function. Find the best function that - matches on the argument types according to the overload resolution - rules. - (_initialize_valops): Add new set/show command for overload-resolution. - - * value.h (VALUE_POINTED_TO_OFFSET): New macro. - Add field pointed_to_offset to value structure. - Add prototypes for new functions in valops.c. - - * value.h (write_register_pid): Change prototype to match - function. - - * value.h: Hp merge, 4/15/98 snapshot - Added parameter to val_print func decl. - Added new macro, VALUE_EMBEDDED_OFFSET, and - new func decl, find_rt_vbase_offset, for C++ - support. - - * values.c (allocate_value): Allocate also for value_embedded_offset - and value_enclosing_type. - (value_copy): Copy value_embedded_offset and value_enclosing_type too. - Use all_raw in copying the value itself. - (value_primitive_field): Add handling of base subobjects. - - * values.c (value_copy): Copy the pointed_to_offset as well. - (allocate_value): Allocate the pointed_to_offset as well. - (value_virtual_fn_field): Rewrite. - - * values.c (value_primitive_field): Adjust embedded offset and - offset calculation. - - * values.c (value_static_field): Take into consideration that static - data members can be minimal symbols too. - - * values.c (value_virtual_fn_field): Fix call to value_at. - - * win32-nat.c (handle_load_dll): Added params to call to symbol_file_add. - - Other changes have to do with XDB compatability. Leave oout - for now. - - defs.h (vfprintf_filtered): Change FILE to GDB_FILE in decl. - (fprintf_filtered): Ditto. - (fprintfi_filtered): Ditto. - (vfprintf_unfiltered): Ditto. - (fprintf_unfiltered): Ditto. - - infcmd.c (_initialize_infcmd): If xdb_commands is set, make S an - alias for next and define R, lr, g. Define go. - - pyr-tdep.c (pyr_print_insn): Change FILE to GDB_FILE. - - - * breakpoint.c (create_temp_exception_breakpoint): #If it out -- - nothing calls it. - (bpstat_stop_status): Don't call SOLIB_HAVE_LOAD_EVENT if it's not - defined; don't call SOLIB_HAVE_UNLOAD_EVENT if it's not defined. - (bpstat_get_triggered_catchpoints): If we don't have shared - library support, then don't call SOLIB_LOADED_LIBRARY_PATHNAME nor - SOLIB_UNLOADED_LIBRARY_PATHNAME. - (watch_command_1): Don't require a run before a watch command - unless we're on HP [it's an HP OS bug, not a generic limitation] - (catch_load_command_1): Don't define if no shared libraries. - (catch_command_1): Don't claim to support fork catchpoints unless - CHILD_INSERT_FORK_CATCHPOINT is defined, don't claim to support - vfork catchpoints unless CHILD_INSERT_VFORK_CATCHPOINT is defined, - don't clain to support shared library load catchpoints if shared - libraries aren't supported, and don't claim to support exec - catchpoints unless CHILD_INSERT_EXEC_CATCHPOINT is defined - - There are new target_ops vector fields that pertain - only to HPUX. Added the to_require_attach and - to_require_detach fields to exec_ops. These new - fields are ifdef'ed for HPUX_SNAP1. - - * breakpoint.h: - Fix compile error in enum bptype. - - * coff-solib.h: - Fixed a number of macro definitions. SOLIB_LOADED_LIBRARY_PATHNAME, - SOLIB_HAVE_LOAD_EVENT, SOLIB_HAVE_UNLOAD_EVENT, - SOLIB_UNLOADED_LIBRARY_PATHNAME, SOLIB_IN_DYNAMIC_LINKER. These - macros are only meaningful (for now) for SOM. So, all - the macros were defined as error(...), but were used in - conditions. This caused the compile to crap out. I redefined - these (for now) to be 0. - - * procfs.c: - (procfs_create_inferior): Fix call to fork_inferior -- need another - parameter. - - * solib.h: - Fixed a number of macro definitions. SOLIB_LOADED_LIBRARY_PATHNAME, - SOLIB_HAVE_LOAD_EVENT, SOLIB_HAVE_UNLOAD_EVENT, - SOLIB_UNLOADED_LIBRARY_PATHNAME, SOLIB_IN_DYNAMIC_LINKER. These - macros are only meaningful (for now) for SOM. So, all - the macros were defined as error(...), but were used in - conditions. This caused the compile to crap out. I redefined - these (for now) to be 0. - - * valops.c: - (search_struct_field): Undeclared local variable, "assigned". - (find_rt_vbase_offset): Fixed call to value_at - - * value.h: Fix signature for find_rt_vbase_offset funct decl - (missing a param) - -Wed Dec 30 17:48:12 1998 Stan Shebs <shebs@andros.cygnus.com> - - From J.T. Conklin <jtc@redbacknetworks.com>: - * i386-stub.c: Fix error string in last change. - -1998-12-30 Jason Molenda (jsm@bugshack.cygnus.com) - - * utils.c: <Readline/readline.h> instead of "readline/readline.h". - - * configure.in (TERM_LIB): Search for the appropriate term library - on the host system. - * configure: Regenerated. - * Makefile.in (TERMCAP): Set based on autoconf check. - * config/*/*.mh: Don't override TERMCAP setting. - -Wed Dec 30 17:23:14 1998 Mark Alexander <marka@cygnus.com> - - * value.c (value_virtual_fn_field): Handle the situation where - vtbl is a pointer to a structure instead of a pointer to an array. - -Mon Dec 28 17:43:36 1998 David Taylor <taylor@texas.cygnus.com> - - The following changes were made by Jim Blandy <jimb@cygnus.com>, - Edith Epstein <eepstein@cygnus.com>, Elena Zannoni - <ezannoni@cygnus.com> Stan Shebs <shebs@cygnus.com>, and David - Taylor <taylor@cygnus.com>, as part of the project to merge in - changes originally made by HP; HP did not create ChangeLog - entries. - - * c-lang.h (cp_print_value_fields): Update prototype; fixed - prototype decl for c_val_print function -- it needed an - embedded_offset param; fixed prototype of cp_print_value_fields. - Include value.h. - (C_LANG_H): Define. - - * c-valprint.c (c_val_print): Add new parameter embedded_offset. - Add embedded_offset to valaddr in function calls. fix calls to - val_print, and cp_print_value_fields. Attempt to determine the - real type of the object to be printed. fixed call to - cp_print_value_fields. process TYPE_CODE_METHOD as well. moved - call to check_typedef out of conditional. add embedded offset - param to val_print call. - - (c_value_print): Add new parameter to call to val_print. Handle - pointer to class case. Ensure that const char *, const unsigned - char * come out without the type but the volatile variants and the - signed variants don't. - - * ch-lang.h (chill_val_print): Add parameter to decl. - - * ch-valprint.c: The various print routines have an additional - parameter. Currently, the new parameter is only used when printing - C++ expressions. So, in ch-valprint.c, the new parameter is always - 0. Changes in calls to val_print, chill_val_print, c_val_print - Affected functions are chill_val_print_array_elements, - chill_val_print, chill_print_value_fields, chill_value_print. - - * cp-valprint.c add vtable pointers names for aCC (HP) compiler. - (cp_print_class_method): Print message for HP/aCC case. - (cp_print_class_member): Add comments. - (cp_print_value): Adjust address computations for virtual base - classes. add new parameter 'offset'. Find correct offset for - base class in HP/aCC case. Change call to cp_print_value_fields - to have extra par. - (cp_print_value_fields): Do not print also if the only field is - the vtable pointer. Print out vtable ptr, for HP/aCC compiled - case. do not print leading '=' in case of anonymous union, or - struct. add new parameter 'offset'. Do not print the vtable - pointer as a member, in the HP aCC case. Changed calls to - val_print to have extra parameter. - (cp_print_hpacc_virtual_table_entries): New function. Print vtable - entries, in HP/aCC compiled case. - (cp_print_static_field): Change call to cp_print_value_fields, and - val_print. - - * d30v-tdep.c (d30v_print_register): Add embedded_offset param - to val_print call. - - * defs.h: Additional include files included when TUI is defined. - (gdb_file_isatty): New function decl. - (GDB_FILE): If TUI is defined, define a structure rather - than making this an alias for FILE. - (gdb_stdout, gdb_stderr): If TUI is defined, then define these - as pointers to variables of type GDB_FILE rather than making them - be aliases for stdout and stderr. - (TUIDO): Add definition conditionalized on definition - (or lack thereof) of TUI. - (command_class): Add two additional values. - (precision_type): New enum. - (gdb_fclose): Add decl. - (store_address): Change prototype to match function. - (tui_version, xdb_commands, dbx_commands): Add decls. - (gdb_file_deallocate): New function decl - (pa_do_strcat_registers_info): New function decl. - (streamtype): New enumerated type to distinguish between output to - a FILE and output to a buffer. - (tui_stream): New struct type, named GDB_FILE. - (gdb_stdout): Of type GDB_FILE, will pass this around gdb rather - than stdout. - (gdb_stderr): Of type GDB_FILE, will pass this around gdb rather - than stderr. - (fputs_unfiltered_hook): Change stream parameter from FILE to - GDB_FILE. - (flush_hook): Change stream parameter from FILE to GDB_FILE. - (gdb_fclose): Fix decl for gdb_fclose; parameter is now of - type GDB_FILE **. - (gdb_file_adjust_strbuf): New function decl. function lives - in utils.c. - (gdb_file_init_astring): New function decl. function lives - in utils.c. - (gdb_file_get_strbuf): New function decl. function lives in - utils.c. - (source_full_path_of): Declare. - - * exec.c (_initialize_exec): Make definition of file command be - dependent upon dbx_commands not being set. - (exec_file_attach): New function. - (exec_file_command): Call it. - (exec_ops): Add new target vector fields. - - * f-lang.h (f_print_type): Change FILE to GDB_FILE in decl. - (f_val_print): Ditto. - (f_val_print): Add parameter to the function decl. - - * f-valprint.c (_initialize_f_valprint): If xdb_commands is set, - define lc command. - (f77_create_arrayprint_offset_tbl): Change FILE to GDB_FILE. - (f77_print_array): Ditto. - (f77_print_array_1): Ditto. - (f_val_print): Ditto. - (f_val_print): Add a parameter; this new parameter is currently - only non-zero when handling C++ expressions. In this file its - value is always 0. changed fflush to gdb_flush. - - * gnu-nat.c: (init_gnu_ops): Add new target vector fields. - (gnu_create_inferior): Add param to fork_inferior call. - - * hppa-tdep.c (after_prologue): If f is NULL, don't dereference - it. if no debug info, return zero telling caller that we need to - find the end of the prologue via the hard way (instruction - examination). - (find_unwind_entry): Avoid dereferencing a null - pointer. - (hppa_pid_to_exec_file): Deleted -- no longer used. - (hppa_prepare_to_proceeed): Add prototype. - (read_unwind_info): Purecov comments, bug fixes. - (find_unwind_entry): Purecov comments, bug fixes. - (find_stub_with_shl_get): Purecov comments. - (frame_chain): Additional parens. - (hppa_push_arguments): Changes to commented out version of routine. - (hppa_fix_call_dummy): Purecov comments, fix location of end.o. - (in_solib_call_trampoline): Purecov comments. - (in_solib_return_trampoline): Purecov comments. - (setup_d_pid_in_inferior): Fix location of end.o. - (initialize_hp_cxx_exception_support): Fix location of end.o. - (child_enable_exception_callback): Purecov comments. - (pa_do_strcat_registers_info): Has a new parameter, precision, - which is passed into the call to pa_strcat_fp_reg to indicate - whether to display the floating point registers using - single or double preceision. - (pa_strcat_registers): Introduce local variable, precision, and - pass it into call to pa_strcat_fp_reg. - (pa_strcat_fp_reg): Modified function. New parameter, precision, - used by function to decide whether to use single or double - precision. Also add the code to put a double precision value - into a buffer. - (pa_do_strcat_registers_info): New routine. called by - tui/tuiRegs.c:_tuiRegisterFormat to place a register name - and value into a string buffer. Interface may change in - future. Checking this in so that we have something - functional for HP. - (pa_strcat_registers): New routine, called by - pa_do_strcat_registers_info. Does same thing as - pa_print_registers except it takes a stream parameter. - This routine should disappear in future. Checking in - so that we have something functional to give HP - (pa_strcat_fp_reg): New routine, called by - pa_do_strcat_registers_info and pa_strvat_registers - to place a floating point register name and value into - a buffer. This interface may change in future. - Checking in so that we have something functional to give HP. - (pa_print_fp_reg): Change prototype to match def'n. - (pa_register_look_aside): Fix comment immediately before function. - Changes to better support stack unwinding, reading and writing - registers for HPUX. New includes ptrace.h, bfd.h, dl.h. - (internalize_unwinds): Initialize new fields in table. - (read_unwind_info): Entries in the table are now more complex - structures. References of the form ...->table[index].stub_type are - now ...->table[index].stub_unwind.stub_type. - (find_proc_framesize): Add a check for pc == 0. - (rp_saved): Entries in the table are now more complex - structures. References of the form ...->table[index].stub_type are - now ...->table[index].stub_unwind.stub_type. - (frameless_function_invocation): Stub_type becomes - stub_unwind.stub_type - (saved_pc_after_call): Stub_type becomes stub_unwind.stub_type - (hppa_frame_saved_pc): Stub_type becomes stub_unwind.stub_type - (frame_chain_valid): Stub_type becomes stub_unwind.stub_type - (hppa_call_dummy): Stub_type becomes stub_unwind.stub_type - (pa_print_fp_reg): Additional params to call val_print - (in_solib_call_trampoline): Stub_type becomes - stub_unwind.stub_type - (in_solib_return_trampoline): Stub_type becomes - stub_unwind.stub_typ - (skip_trampoline_code): Additional code to handle external - dyncalls. Also stub_type becomes stub_unwind.stub_type - (hppa_pid_to_exec_file): New funct. FOr HPUX 10.0 and beyond there - is an explicit ptrace request for getting the pathname associated - with a process id (pid). - (hppa_pid_to_exec_file): Remove unwanted param from call to - call_ptrace. - (args_for_find_stub): New structure. - (find_unwind_entry): Deal with null input pc value. - (rp_saved): Ditto. - For the import stub, return -24 always. - (hppa_frame_saved_pc): Save old pc value, to detect we are in a loop. - (init_extra_frame_info): Use TARGET_READ_FP. - (frame_chain): Include thread support. - If the caller's pc is zero, we lose and return, just like stack - bottom. - Disable warning about being unable to find unwind info. - (hppa_push_arguments): Rewrite. - (hppa_value_returned_from_stack): New function. Handles returning - a value larger than 64 bits, stored on the stack. - (find_stub_with_shl_get): New function. To look up symbols in shlibs. - (cover_find_stub_with_shl_get): New function. Cover routine for - find_stub_with_shl_get to pass to catch_errors. - (hppa_fix_call_dummy): Comment out old stub mechanism. - Rewrite using dyncall. - (target_read_fp): New function. - (pa_do_registers_info): Floating point registers start at FP4. - (pa_print_registers): Use FP4_REGNUM instead of 72. - (skip_trampoline_code): Do machine instruction matching for PA2.0. - (setup_d_pid_in_inferior): New function. Exception handling support. - (initialize_hp_cxx_exception_support): Ditto. - (child_enable_exception_callback): Ditto. - (child_get_current_exception_event): Ditto. - - * hpux-thread.c (hpux_thread_ops): Add new target vector fields. - - * infcmd.c: Include objfiles.h. - (attach_command): New local variable, exec_file, add code to - determine exec_file from pid if exec_file is not already known, - call new target operation, target_post_attach -- a no-op unless - on HPUXHPPA. - (detach_command): After detaching, do a SOLIB_RESTART. - (objfiles.h): Fix typo on include line. - (run_command): Only call SOLIB_RESTART if it's defined. - (detach_command): Ditto. - (run_command): If program has already been started, and decide - to restart it, the kill the target, flush the caches, - call init_wait_for_inferior. Also purge old solib objfiles. - (run_stack_dummy): Add calls to - disable_watchpoints_before_interactive_call_start and - enable_watchpoints_after_interactive_call_stops. - (finish_command): Alter code handling the evaluation and printing - of the target function's return value. - (attach_command): When given a pid, but no exec file, try to - determine the exec file from the process. If the process does not - record a full path name, try to qualify the filename against the - source path. - (_initialize_infcmd): Add some verbiage about how to use the - attach command. - (do_registers_info): Changed calls to val_print - made the symfile.h include preceed the - objfiles.h include. The other ordering caused a - compile problem (incompletely defined types). - - * inftarg.c (child_post_attach): Fix decl, make static. - (proc_wait): Make globally visible. - (child_insert_fork_catchpoint, etc): Fix return type. - (child_detach_from_process): Declare. - (child_attach_to_process): Declare. - (child_stop): Make static to match decl. - (ptrace_him): Change prototype back to return int. - (ptrace_me): Remove debug output, pass NULL to fork_inferior if - not HPUX. - (proc_wait): function prototype and definition are enclosed by - proc_wait ifndef - (child_attach_to_process): New function, does most of the work - that child_attach used to do and some additional work to determine - whether gdb is already attached to the target how to react. - (child_attach): Altered. It's now a wrapper for - child_attach_to_process. - (child_require_attach): New function, called if should attach even - when gdb is already attached to target. - (child_detach_from_process): New function, does most of the work - that child_detach used to do and some additional work to determine - whether gdb is currently attached to the target. - (child_detach): Altered. It's now a wrapper for - child_detach_from_process. - (child_require_detach): New function, called if should try to - detach even when gdb is not attached to target. - (ptrace_him): Calls a new function, - target_acknowledge_forked_child. Currently, - target_acknowledge_forked_child, is only defined to do something - for HPUX. - (child_create_inferior): Changed call to fork_inferior. - (child_ops): Add to_require_attach and to_require_detach fields - to the child_ops target ops vector. - Some hacks for ttrace work: - (child_wait): Additional local variables, additional code in - while loop to check for process exited, process forked, - process vforked, process execd. - (child_thread_alive): John B. seems to think that the kill - call is inapproapriate for HPUX. - (child_attach_to_process): Using strtol rather than atoi. - no longer check for case where there is no known exec file. - (child_post_attach): New function, a default, a no-op. - (child_insert_fork_catchpoint): New function, a default, a no-op. - (child_remove_fork_catchpoint): New function, a default, a no-op. - (child_insert_vfork_catchpoint): New function, a default, a no-op. - (child_remove_vfork_catchpoint): New function, a default, a no-op. - (child_can_follow_vfork_prior_to_exec ):new function, a default, - a no-op. - (child_insert_exec_catchpoint): New function, a default, a no-op. - (child_remove_exec_catchpoint): New function, a default, a no-op. - (child_has_execd): New function, a default, returns 0. - (child_reported_exec_events_per_exec_call): New function, a - default, returns 1. - (child_has_exited): New function, a default. - (child_core_file_to_sym_file): New function, a default, returns NULL. - (child_ops): Initialize new target vector fields. - - * jv-lang.h: (Java_val_print): Add embedded_offset param to func - decl. - - * jv-valprint.c: Changing calls to val_print to accomodate new param. - (java_value_print): Add embedded_offset param to val_print call - (java_print_value_fields): Add embedded_offset param to val_print - call. - (java_val_print): Add embedded_offset param. alter call to - c_val_print to accomodate embedded_offset param. - - * language.c (lang_bool_type): Return builtin_type_bool in c++ - case. - (unk_lang_val_print): Add embedded_offset param to - prototype decl and definition. - - * language.h (LA_VAL_PRINT macro, la_val_print function decl): - altered to accomodate the new parameter to the various print - functions. - - * m2-lang.h (m2_val_print): Add a parameter to the function decl. - - * m2-valprint.c (m2_val_print): Add a parameter. - This parameter is currently only used when evaluating C++ - expressions. So, it is always 0 in this file. - - * m3-nat.c (m3_create_inferior): Add param to fork_inferior call - (m3_pid_to_exec_file): New function - (m3_ops): Add new target vector fields. - - * mac-nat.c (init_child_ops): Add new target vector fields. - - * mips-tdep.c: Chnages to accomodate additional parameter - to val_print. - (mips_print_register): Alter calls to val_print - - * monitor.c (monitor_write): Change stderr to gdb_stderr. - (monitor_remove_breakpoint): Ditto. - (init_base_monitor_ops): Add new target vector fields. - - * ppc-bdm.c (init_bdm_ppc_ops): Add new target vector fields. - - * printcmd.c (do_examine): When saving a value_ptr, remove it from - the list of value_ptr's to be freed automatically; when discarding - a previously saved value_ptr, free it. - (print_formatted): Update comments; add new comments. - (printf_command, print_insn): Purecov comments. - (_initialize_printcmd): Add assign as a command if dbx_commands is - set; create va as an alias for disassemble if xdb_commands is set. - (address_info): New cases LOC_INDIRECT and - LOC_THREAD_LOCAL_STATIC. - (display_command): If tui_version and exp starts with a '$', then - don't display it unless tui_vSetLayoutTo fails. - (disassemble_command): Add tuiDo calls. - (print_scalar_formatted): For integers that are long long, check - the print format and print out in binary octal, decimal, or - hex. Call the new print_*_chars functions in valprint.c - (print_frame_args): Altered calls to val_print, to reflect - additional parameter to val_print (case LOC_BASEREG_ARG). - - * procfs.c: (Procfs_init_inferior): Return value is now a void. - (procfs_ops): Add new target vector fields. - (procfs_create_inferior): Fix call to fork_inferior -- need another - parameter. - - * remote-adapt.c (adapt_open): Change stderr to gdb_stderr. - (adpat_insert_breakpoint): Ditto. - (init_adapt_ops): Add new target vector fields. - - * remote-array.c (array_wait): Change fflush to gdb_flush and - stdout to gdb_stdout. - (init_array_ops): Add new target vector fields. - - * remote-bug.c (bug_load): Change fflush to gdb_flush; stdout to - gdb_stdout. - (bug_wait): Change stderr to gdb_stderr. - (bug_insert_breakpoint): Ditto. - (init_bug_ops): Add new target vector fields. - - * remote-e7000.c - (init_e7000_ops): Add new target vector fields. - * remote-eb.c (init_eb_ops): Ditto. - * remote-es.c (init_es1800_ops): Ditto. - (init_es1800_child_ops): Ditto. - * remote-es.c (init_es1800_ops): Ditto. - (init_es1800_child_ops): Ditto. - * remote-hms.c (init_hms_ops): Ditto. - * remote-hms.c (init_hms_ops): Ditto. - * remote-nindy.c (init_nindy_ops): Ditto. - * remote-nrom.c (init_nrom_ops): Ditto. - * remote-os9k.c (init_rombug_ops): Ditto. - * remote-rdp.c (init_remote_rdp_ops): Ditto. - * remote-sds.c (init_sds_ops): Ditto. - * remote-sim.c (init_gdbsim_ops): Ditto. - * remote-st.c (init_st2000_ops): Ditto. - * remote-udi.c (init_udi_ops): Ditto. - * remote-vx.c (init_vx_ops): Ditto. - (init_vx_run_ops): Ditto. - * remote-vx.c: (Init_vx_ops): Ditto. - (init_vx_run_ops): Ditto. - - * remote-mips.c (mips_getstring): Change stderr to gdb_stderr. - (pmon_insert_breakpoint): Ditto. - (pmon_remove_breakpoint): Ditto. - (check_lsi_error): Ditto. - (common_breakpoint): Ditto. - (pmon_makeb64): Ditto. - - * remote-mips.c (mips_xfer_memory): Change fflush to gdb_flush; - change stdout to gdb_stdout. - - * remote-mm.c (mm_open): Change stderr to gdb_stderr. - (init_mm_ops): Add new target vector fields. - (mm_load): Fixed params in commented out call to symbol_file_add. - - * remote-nindy.c (instream): Change decl to FILE. - - * remote-udi.c (udi_load): Fixed params in call to symbol_file_add. - - * remote-vx.c (vx_add_symbols): Fixed params in call to - symbol_file_add. - - * remote.c (init_remote_ops): Cosmetic change to match expected - test output. - - * rs6000-nat.c (add_vmap): Add params to call to allocate_objfile. - - * scm-lang.h: Add parameter to scm_val_print function decl. - - * scm-valprint.c (scm_scmval_print): Cast svalue to (int); new - parameter. This parameter is currently only used when evaluating - C++ expressions. So, it is always 0 in this file. - (c_val_print): Fixed prototype decl; it needed an embedded_offset - param. - - * sol-thread.c (sol_core_ops): Add new target vector fields. - (sol_thread_ops): Ditto. - - * somsolib.c (DLD_FLAGS_MAPPRIVATE): New macro. - Define bit of __dld_flags in HP-UX a.out files. - (DLD_FLAGS_HOOKVALID): Ditto. - (DLD_FLAGS_LISTVALID): Ditto. - (DLD_FLAGS_BOR_ENABLE): Ditto. - (som_solib_total_st_size): Cumulative size in bytes of the - symbol tables of all shared objects on the so_list_head list. - (som_solib_st_size_threshhold_exceeded): Threshold for adding symbols - for shlibs. - (som_solib_sizeof_symbol_table): New function. Computes size of - symbol table for a shlib. - (som_solib_load_symbols): New function. Load symbols from shlib. - (som_solib_add): Detect if __dld_list is not valid. - Record main program's symbol table size. - Load symbols if called from command line. - Keep threshold into account when loading shlib symbols. - (som_solib_create_inferior_hook): Use dld_flags macros. - (som_sharedlibrary_info_command): Let user know if symbols were - not loaded. - (som_solib_restart): Discard all the shlibs descriptors. - (_initialize_som_solib): Chenge help message for auto-solib-add - command. - Set threshold for symbol table to 50 megabytes. - (_initialize_som_solib): Add call to som_solib_restart. - (som_solib_restart): New function - (som_solib_in_dynamic_linker): New function - (som_solib_desire_dynamic_linker_symbols): New function - (som_solib_unloaded_library_pathname): New function - (som_solib_loaded_library_pathname): New function - (som_solib_library_pathname): New function - (som_solib_have_unload_event): New function - (som_solib_have_load_event): New function - (som_solib_create_catch_unload_hook): New function - (som_solib_create_catch_load_hook): New function - (som_solib_create_inferior_hook): Rewritten - dld_cache: New struct - addr_and_unwind_t: New struct - (find_unwind_entry) add prototype - Include assert.h, remove references to ASSERT macro, - add include of fcntl.h so that O_RDONLY is defined. - (som_solib_create_inferior_hook): Introduce new local - msymbol2 and change some msymbol's to msymbol2's -- was clobbering - msymbol, passing a NULL to lookup_minimal_symbol_solib_trampoline, - and ultimately core dumping with a SEGV. - (som_solib_mapped_entry): Additional comments for text_addr, - text_link_addr, text_end, and tsd_start_addr fields. Commenting - out 2 tsd fields, __data_start and __data_end. - (som_solib_add_solib_objfile): Add params to calls to symbol_file_add. - Add some code for distinguishing between a shared library and other - objfiles. This appears to be a prelude to thread local storage. - (som_solib_load_symbols): Changes to printf statement - enclosed by SOLIB_DEBUG ifdef. - (som_solib_add): Change comment to correctly specify path - to end.o -- /opt/langtools/lib/end.o. changes to printf statement - enclosed by SOLIB_DEBUG ifdef. - Removed several SOLIB_DEBUG ifdefs and the associated printfs. - Add code to find the start address for the object file's thread - local storage - (som_solib_create_inferior_hook): Fix warning messages use correct - path to end.o -- /opt/langtools/lib/end.o. Change control flow. - No longer user early returns from function is cases of error. - (reset_inferior_pid): New function - (som_solib_remove_inferior_hook): New function - (so_lib_thread_start_addr): New function. used for tsd. - (struct som_solib_mapped_entry): Add new field tsd_start_addr. - (struct so_list): Add new field solib_addr. - (som_solib_add_solib_objfile): New function. - (som_solib_load_symbols): Rewritten. - (som_solib_add): Make sure we don't load the symbols in if the - threshold was exceeded. - (som_solib_get_solib_by_pc): New function. Return the address of - handle of the shared library. - (som_solib_restart): Disable breakpoints at restart. - - * sparcl-tdep.c (init_sparclite_ops): Add new target vector fields. - - * target.c (cleanup_target): Changed casting of default functions - for to_has_forked, to_has_vforked, to_pid_to_exec_file to get rid - of warnings. Fixed PARAMS for to_has_syscall_event. Fixed the - return type on a few of the default function values. - (cleanup_target): Changes in the de_fault macro, both to - accomodate the new target_ops vector fields and to use - more accurate default functions. - (debug_to_open): Change stderr to gdb_stderr. - (debug_to_close): Ditto. - (debug_to_attach): Ditto. - (debug_to_post_attach): Ditto. - (debug_to_require_attach): Ditto. - (debug_to_detach): Ditto. - (debug_to_require_detach): Ditto. - (debug_to_resume): Ditto. - (debug_to_wait): Ditto. - (debug_to_post_wait): Ditto. - (debug_to_fetch_registers): Ditto. - (debug_to_store_registers): Ditto. - (debug_to_prepare_to_store): Ditto. - (debug_to_xfer_memory): Ditto. - (debug_to_files_info): Ditto. - (debug_to_insert_breakpoint): Ditto. - (debug_to_remove_breakpoint): Ditto. - (debug_to_terminal_init): Ditto. - (debug_to_terminal_inferior): Ditto. - (debug_to_terminal_ours_for_output): Ditto. - (debug_to_terminal_ours): Ditto. - (debug_to_terminal_info): Ditto. - (debug_to_kill): Ditto. - (debug_to_load): Ditto. - (debug_to_lookup_symbol): Ditto. - (debug_to_create_inferior): Ditto. - (debug_to_post_startup_inferior): Ditto. - (debug_to_acknowledge_created_inferior): Ditto. - (debug_to_clone_and_follow_inferior): Ditto. - (debug_to_post_follow_inferior_by_clone): Ditto. - (debug_to_insert_fork_catchpoint): Ditto. - (debug_to_remove_fork_catchpoint): Ditto. - (debug_to_insert_vfork_catchpoint): Ditto. - (debug_to_remove_vfork_catchpoint): Ditto. - (debug_to_has_forked): Ditto. - (debug_to_has_vforked): Ditto. - (debug_to_can_follow_vfork_prior_to_exec): Ditto. - (debug_to_post_follow_vfork): Ditto. - (debug_to_insert_exec_catchpoint): Ditto. - (debug_to_remove_exec_catchpoint): Ditto. - (debug_to_has_execd): Ditto. - (debug_to_reported_exec_events_per_exec_call): Ditto. - (debug_to_has_syscall_event): Ditto. - (debug_to_has_exited): Ditto. - (debug_to_mourn_inferior): Ditto. - (debug_to_can_run): Ditto. - (debug_to_notice_signals): Ditto. - (debug_to_thread_alive): Ditto. - (debug_to_stop): Ditto. - (debug_to_enable_exception_callback): Ditto. - (debug_to_get_current_exception_event): Ditto. - (debug_to_pid_to_exec_file): Ditto. - (debug_to_core_file_to_sym_file): Ditto. - (default_clone_and_follow_inferior): New function prototype - decl and function definition. - (dummy_target): Add new target_ops vector fields and their - initializations. More target_ops vector changes for HPUX new - fields. - (de_fault): Add new HPUX specific target_ops operations to the - de_fault macro - (INHERIT): Add new HPUX specific target_ops operations. - (debug_to_post_wait): New function. - (debug_to_post_startup_inferior): Ditto. - (debug_to_acknowledge_created_inferior): Ditto. - (debug_to_clone_and_follow_inferior): Ditto. - (debug_to_post_follow_inferior_by_clone): Ditto. - (debug_to_create_catch_fork_hook): Ditto. - (debug_to_create_catch_vfork_hook): Ditto. - (debug_to_has_forked): Ditto. - (debug_to_has_vforked): Ditto. - (debug_to_post_follow_vfork): Ditto. - (setup_target_debug): Initialize new target_ops vector fields. - (nosupport_runtime): New function, used in cleanup_target - (update_current_target): Add new new target_ops vector fields to - the INHERIT macro definition. - (generic_mourn_inferior): The call to breakpoint_init_inferior now - takes a parameter. - (normal_pid_to_str): Add a \0 to the end of buf. - (debug_to_has_syscall_event): New function. - (debug_to_enable_exception_callback): New function. - (debug_to_get_current_exception_event): New function. - (setup_target_debug): Initialize the 3 new target_ops vector fields - (struct signals): Fix message associated with SIGRETRACT. - (return_one): New function, used by the de_fault macro - (debug_to_post_attach): New function. - (debug_to_wait): Add new cases TARGET_WAITKIND_FORKED, - TARGET_WAITKIND_VFORKED, TARGET_WAITKIND_EXECD. - (debug_to_insert_fork_catchpoint): New function. - (debug_to_remove_fork_catchpoint): Ditto. - (debug_to_insert_vfork_catchpoint): Ditto. - (debug_to_remove_vfork_catchpoint): Ditto. - (debug_to_can_follow_vfork_prior_to_exec): Ditto. - (debug_to_insert_exec_catchpoint): Ditto. - (debug_to_remove_exec_catchpoint): Ditto. - (debug_to_core_file_to_sym_file): Ditto. - (setup_target_debug): Give new fields in current_target target_ops - vector values. - - * target.h: Include symtab.h. - (target_waitkind): New enumerated values - TARGET_WAITKIND_SYSCALL_ENTRY, TARGET_WAITKIND_SYSCALL_RETURN, - TARGET_WAITKIND_FORKED, TARGET_WAITKIND_VFORKED, - TARGET_WAITKIND_EXECD. - (target_waitstatus): Add a syscall_id field to structure. - (child_has_syscall_event): New decl. - (child_thread_alive): New decl. - (target_ops): Add 3 new fields: To_has_syscall_event, - to_enable_exception_callback, to_get_current_exception_event - (target_enable_exception_callback): New macro. - (target_has_syscall_event): New macro. - (target_get_current_exception_event): New macro. - (TARGET_DISABLE_HW_WATCHPOINTS): New macro. - (TARGET_ENABLE_HW_WATCHPOINTS): New macro. - (PC_REQUIRES_RUN_BEFORE_USE): New macro. - (target_tid_to_str): New macro. - (target_waitstatus): Additional fields in struct to keep track - of child pid and pathname to execd file. - (target_ops): Add in the new target_ops function pointer fields. - New macros to go along with new target_ops fields. - In target_waitstatus.value, change name of child_pid field to - related_pid. - (target_pid_or_tid_to_str): Define default macro. - Add missing #endif after PC_REQUIRES_RUN_BEFORE_USE definition - (ENSURE_VFORKING_PARENT_REMAINS_STOPPED): Define default macro. - (RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK): Define default - macro. - There are new function decls for to_require_attach - and to_require_detach. There are also new macros, - target_require_attach and target_require_detach. There are - also new function decls for find_default_require_detach - and find_default_require_attach. - (target_ops): New fields to_post_wait, to_post_startup_inferior - to_acknowledge_created_inferior, to_clone_and_follow_inferior, - to_post_follow_inferior_by_clone, to_create_catch_fork_hook, - to_create_catch_vfork_hook, to_has_forked, to_has_vforked, - to_post_follow_vfork, to_pid_to_exec_file. - New function definitions child_pid_to_exec_file, child_post_wait, - child_post_startup_inferior, child_acknowledge_created_inferior, - child_clone_and_follow_inferior, - child_post_follow_inferior_by_clone, child_create_catch_fork_hook, - child_create_catch_vfork_hook, child_has_forked, - child_has_vforked, child_acknowledge_created_inferior, - child_post_follow_vfork. - New macros target_post_startup_inferior, - target_acknowledge_created_inferior, - target_clone_and_follow_inferior, - target_post_follow_inferior_by_clone, - target_create_catch_fork_hook, target_create_catch_vfork_hook, - target_pid_to_exec_file. - (find_default_clone_and_follow_inferior): New function prototype. - -start-sanitize-sky - * txvu-tdep.c (txvu_print_register): Add embedded_offset param - to val_print call. -end-sanitize-sky - - * v850ice.c (init_850ice_ops): Init new target vector fields. - - * valprint.c (print_binary_chars): Print out long long as - a binary number. - (print_octal_chars): Print out long long as an octal number - (print_decimal_chars): Print out long long as a decimal number - (strcat_longest): Define it. - * valprint.c: Hp merge, 4/15/98 snapshot - Add parameter to val_print. This is used for - evaluating C++ expressions. - - * value.h (VALUE_POINTED_TO_OFFSET): New macro. - Add field pointed_to_offset to value structure. - Add prototypes for new functions in valops.c. - (write_register_pid): Change prototype to match - function. - (val_print function decl): Additional parameter. - (VALUE_EMBEDDED_OFFSET): New macro. - (find_rt_vbase_offset): New function decl -- for C++ support. - -Wed Dec 23 15:03:42 1998 Per Bothner <bothner@cygnus.com> - - * Makefile.in (READLINE_CFLAGS): Search $(READLINE_SRC)/.. rather - than $(READLINE_SRC) so #include <readline/readline.h> will work. - * top.c: #include <readline/history.h> instead of "history.h". - * tracepoint.c: Likewise. - * mac-xdep.c: Likewise. - -Wed Dec 23 12:32:00 1998 Andrew Cagney <cagney@chook.cygnus.com> - - * defs.h (TARGET_FLOAT_FORMAT, TARGET_DOUBLE_FORMAT): Define using - TARGET_BYTE_ORDER and not target_byte_order. - -Tue Dec 22 10:51:33 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * config/i386/cygwin.mh (TERMCAP): define. - (from Chris Faylor, cgf@cygnus.com) - - * top.c: specify directory name for including readline.h - - * tracepoint.c: ditto. - - * utils.c: ditto. - -Mon Dec 21 13:30:34 1998 Mark Alexander <marka@cygnus.com> - - * value.c (value_virtual_fn_field): Handle the situation where - vtbl is a pointer to a structure instead of a pointer to an array. - -Mon Dec 21 10:38:11 1998 Andrew Cagney <cagney@chook> - - * mips-tdep.c: (MIPS_DEFAULT_FPU_TYPE): Default to - MIPS_FPU_DOUBLE. - -1998-12-17 J.T. Conklin <jtc@redbacknetworks.com> - - * blockframe.c (get_frame_saved_regs): If the saved_regs_addr ptr - is null, ensure that saved registers are copied from the local - variable that was used to obtain them. - -Sat Dec 19 09:55:09 1998 Stu Grossman <grossman@babylon-5.cygnus.com> - - * mips-tdep.c (mips32_heuristic_proc_desc): Clear temp_saved_regs - on restart. Fixes problem with backtracing through functions that - use virtual frame pointers. - -Fri Dec 18 14:23:34 1998 Andrew Cagney <cagney@chook> - - * mips-tdep.c (mips_push_arguments): Don't left-shift small - structs being passed in a register when an O64 target. - - * config/mips/tm-mips.h (enum mips_fpu_type, mips_fpu): Move to - mips-tdep.c. - - * mips-tdep.c (mips_fpu_string): Delete variable. - (mips_fpu_type_auto): New variable. - (mips_fpu_type): Rename mips_fpu. - (_initialize_mips_tdep): Delete initialization of mips_fpu et.al. - Rewrite ``set mipsfpu'' command set. - (set_mipsfpu_command, show_mipsfpu_command, - set_mipsfpu_single_command, set_mipsfpu_double_command, - set_mipsfpu_none_command, set_mipsfpu_auto_command): New - functions, handle commands. - (mips_push_arguments, mips_push_dummy_frame, mips_pop_frame, - mips_extract_return_value): Update. - (start-sanitize-carp start-sanitize-vr4xxx); - (_initialize_mips_tdep): Set mips_fpu_type according to current - processor. - (_initialize_mips_tdep): Only define ``set processor'' command - when not multi-sim. - (end-sanitize-carp end-sanitize-vr4xxx) - -start-sanitize-carp start-sanitize-vr4xxx -Fri Dec 18 12:56:56 1998 Andrew Cagney <cagney@chook> - - * gdbarch.h (gdbarch_init_ftype): Pass struct gdbarch_info - by-value. - (struct gdbarch_info): Add struct gdbarch_tdep_info *tdep_info. - * gdbarch.c (gdbarch_update): Update. - * mips-tdep.c: (mips_gdbarch_init): Update - - * gdbarch.c (gdbarch_update): Add more tracing. - -end-sanitize-carp end-sanitize-vr4xxx -Thu Dec 17 02:15:40 1998 Andrew Cagney <cagney@chook.cygnus.com> - - * configure.tgt (gdb_target): Identify mips64*vr4100*-*-elf* as - vr4100. -start-sanitize-vr4xxx - * config/mips/vr4100.mt, config/mips/tm-vr4100.h: Replace - vr4xxx.mt and tm-vr4xxx.h. - * configure.tgt (gdb_target): Identify mips64*vr4xxx*-*-elf* as - vr4xxx. - * config/mips/vr4xxx.mt, config/mips/tm-vr4xxx.h: New files. - Define GDB_MULTI_ARCH and MIPS_DEFAULT_FPU_TYPE. -end-sanitize-vr4xxx - -start-sanitize-carp start-sanitize-vr4xxx -Thu Dec 17 02:06:17 1998 Andrew Cagney <cagney@chook.cygnus.com> - - * mips-tdep.c (mips_gdbarch_init): New function. Initialize a MIPS - architecture vector. - (_initialize_mips_tdep): Register MIPS with GDBARCH. - (struct gdbarch_tdep): Define. - (MIPS_EABI, MIPS_LAST_FP_ARG_REGNUM, MIPS_LAST_ARG_REGNUM): When - multi-arch, get value from gdbarch->tdep. - -Thu Dec 17 02:01:58 1998 Andrew Cagney <cagney@chook> - - * gdbtypes.c (_initialize_gdbtypes): Register all builtin types - with gdbarch so that they are updated whenever the architecture is - changed. - -Thu Dec 17 01:58:16 1998 Andrew Cagney <cagney@chook> - - * gdbarch.h (GDB_MULTI_ARCH): New macro, default to zero. - (current_gdbarch): Current architecture pointer. - * gdbarch.c (struct gdbarch): Define. - - * gdbarch.h (TARGET_ARCHITECTURE, TARGET_BYTE_ORDER, - TARGET_LONG_BIT, TARGET_LONG_LONG_BIT, TARGET_PTR_BIT): When - multi-arch force definition. - * gdbarch.h, gdbarch.c (gdbarch_tdep, gdbarch_bfd_arch_info, - gdbarch_byte_order, {set,}gdbarch_long_bit, - {set,}gdbarch_long_long_bit, {set,}gdbarch_ptr_bit): Corresponding - functions. - - * gdbarch.h (struct gdbarch_list, struct gdbarch_info, - gdbarch_init_ftype), gdbarch.c (register_gdbarch_init): Mechanism - for registering an architecture with GDB. - (gdbarch_list_lookup_by_info, gdbarch_alloc, gdbarch_update, - verify_gdbarch): Support functions. - - * gdbarch.h (gdbarch_data_ftype), gdbarch.c - (register_gdbarch_data, gdbarch_data): Mechanism for maintaining - per-architecture pointers. - (init_gdbarch_data): Support functions. - - * gdbarch.h (gdbarch_swap_ftype), gdbarch.c - (register_gdbarch_swap): Ditto for swapped memory regions. - (init_gdbarch_swap, swapout_gdbarch_swap, swapin_gdbarch_swap): - Support functions. - - * gdbarch.c (set_endian_big, set_endian_little, set_architecture, - info_architecture, set_gdbarch_from_file): Hook in multi-arch - code by calling gdbarch_update. - (default_gdbarch): Default multi-arch vector. Use host's type - system for values. - -end-sanitize-carp end-sanitize-vr4xxx -Thu Dec 17 01:34:36 1998 Andrew Cagney <cagney@chook> - - * gdbtypes.c (build_gdbtypes): New function. - (_initialize_gdbtypes): Call. - -Wed Dec 16 11:47:00 1998 Andrew Cagney <cagney@chook> - - * gdbarch.c (show_architecture): Use TARGET_ARCHITECTURE. - * gdbarch.h, gdbarch.c: Fix typo's. Use struct's in preference to - types. - * gdbarch.h, gdbarch.c (gdbarch_debug): Add ``set archdebug'' to - command set. - -Tue Dec 15 23:46:40 1998 Andrew Cagney <cagney@chook> - - * config/mips/tm-*.h: (TARGET_BYTE_ORDER_DEFAULT, - TARGET_BYTE_ORDER_SELECTABLE_P): Replace TARGET_BYTE_ORDER and - TARGET_BYTE_ORDER_SELECTABLE. - -1998-12-14 Anthony Thompson (athompso@cambridge.arm.com) - - * remote-rdp.c (rdp_init): Don't discard first character on reset. - (translate_open_mode): Define table. - (exec_swi): Handle SWI_Clock. SWI_Open now handles stdin/stdout. - SWI_Write returns number of bytes not written. SWI_Read does the - same. SWI_Seek should return success/failure flag. Fix SWI_Flen. - -1998-12-14 J.T. Conklin <jtc@redbacknetworks.com> - - * config/i386/nbsd.mh, config/m68k/nbsd.mh, config/ns32k/nbsd.mh - (XDEPFILES): Add ser-tcp.o. - -Mon Dec 14 14:46:13 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * monitor.c (monitor_expect, monitor_printf_noecho, - monitor_printf): Always compile EXTRA_RDEBUG code. - (RDEBUG): Ditto. - - From Michael Meissner <meissner@cygnus.com>: - * ppcbug-rom.c (init_ppc_cmds): Cleanup formatting. - -1998-12-08 Michael Meissner <meissner@cygnus.com> - - * monitor.c (monitor_printable_string): New function to convert a - string into a printable representation. - (monitor_error): Call error after converting string into printable - format. - (monitor_printf{,_noecho}): If EXTRA_RDEBUG is defined, convert - string into printable form before printing. - (monitor_expect): Ditto. - (monitor_read_memory{,_single}): Call monitor_error, not error. - (monitor_read_memory): Return immediately if length is 0. - - * ppcbug-rom.c (init_ppc_cmds): Fill in dump_registers field, - which is now required. - -Mon Dec 14 11:01:39 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * gdbarch.h, gdbarch.c: Consolidate the semi-dynamic target system - dependant GDB parameters. - (set_gdbarch_from_file): Combine set_architecture_from_file and - set_byte_order_from_file. - * top.c, defs.h, printcmd.c: Delete them from here. - * Makefile.in: Add gdbarch.[ch]. - * exec.c (exec_file_command): Call set_gdbarch_from_file. - -Sun Dec 13 09:52:51 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * defs.h (TARGET_PRINT_INSN_INFO, TARGET_PRINT_INSN): Define. - (TARGET_ARCHITECTURE, TARGET_ARCHITECTURE_AUTO): Define. - (TARGET_BYTE_ORDER_AUTO): Define. - (TARGET_BYTE_ORDER_SELECTABLE_P): Provide default. Replaces - TARGET_BYTE_ORDER_SELECTABLE. Handle compat issues. - (BITS_BIG_ENDIAN): Simplify. - (TARGET_FLOAT_FORMAT): Ditto. - (TARGET_DOUBLE_FORMAT): - - * remote-e7000.c, sh-tdep.c, printcmd.c, remote-sim.c, - remote-rdi.c, sparc-tdep.c: Update. - - * config/powerpc/tm-ppcle-eabi.h, config/rs6000/tm-rs6000.h, - config/powerpc/tm-ppc-eabi.h, config/mn10300/tm-mn10300.h: - Convert. - -Sat Dec 12 09:28:13 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * frame.h (struct frame_info): Add CORE_ADDR *saved_regs and - struct frame_extra_info *extra_info. - (frame_obstack_alloc, frame_saved_regs_zalloc): Prototype. - (SIZEOF_FRAME_SAVED_REGS): Provide default. - (FRAME_INIT_SAVED_REGS): Provide default. - (struct frame_saved_regs): Deprecate. - (EXTRA_FRAME_INFO): Deprecate. - - * blockframe.c (frame_obstack_alloc, frame_saved_regs_zalloc): New - function. - (generic_get_saved_register): Use FRAME_INIT_SAVED_REGS and - frame->saved_regs. - (frame_cache_obstack): Make static. - (get_frame_saved_regs): Deprecate. Copy the saved regs into the - frame buffer. - - * stack.c (frame_info): Rewrite using frame->saved_regs and - FRAME_INIT_SAVED_REGS. - * findvar.c (find_saved_register): Ditto. - - * config/mn10300/tm-mn10300.h (EXTRA_FRAME_INFO): Delete. - (FRAME_FIND_SAVED_REGS): Replace with FRAME_INIT_SAVED_REGS. No-op. - * mn10300-tdep.c: Update. - (analyze_dummy_frame): New function. - (struct frame_extra_info): Define. - (mn10300_init_extra_frame_info): Update. - - * config/rs6000/tm-rs6000.h: (EXTRA_FRAME_INFO): Delete. - (FRAME_FIND_SAVED_REGS): Replace with FRAME_INIT_SAVED_REGS. - (FRAME_ARGS_ADDRESS): Replace with function. - - * rs6000-tdep.c (frame_get_saved_regs): Rename from - frame_get_cache_fsr. - (rs6000_init_extra_frame_info): New function. - (rs6000_frame_init_saved_regs): Call frame_get_saved_regs. - (FUNCTION_START_OFFSET): Delete references, was ZERO. - (rs6000_frame_args_address): New function. - (frame_initial_stack_address): Update - - * config/mips/tm-mips.h (EXTRA_FRAME_INFO): Remove saved_regs. - (FRAME_INIT_SAVED_REGS): Rename FRAME_FIND_SAVED_REGS, update. - * mips-tdep.c (mips_find_saved_regs, read_next_frame_reg, - init_extra_frame_info, mips_pop_frame): Update. - * config/alpha/tm-alpha.h (FRAME_INIT_SAVED_REGS, - EXTRA_FRAME_INFO), alpha-tdep.c (alpha_find_saved_regs, - alpha_pop_frame, init_extra_frame_info): Ditto. - - * i960-tdep.c, m88k-tdep.c, h8300-tdep.c: Update. - * config/sparc/tm-sparc.h, config/a29k/tm-a29k.h: Define - FRAME_INIT_SAVED_REGS as no-op. - - * z8k-tdep.c (z8k_init_frame_saved_regs): Rename - get_frame_saved_regs. - (examine_frame, z8k_skip_prologue): Update. - * config/z8k/tm-z8k.h (FRAME_INIT_SAVED_REGS): Define. - -1998-12-11 Fernando Nasser <fnasser@totem.to.cygnus.com> - - From J.T. Conklin <jtc@redbacknetworks.com>: - * i386-stub.c (handle_exception): Add support for 'P' command. - (NUMREGS): New macro. - -start-sanitize-sky -1998-12-11 Jeff Law (law@cygnus.com) - - * txvu-tdep.c (set_vxtu_prompt): Rename set_prompt. - - * configure.in (with-sim-gpu2): Do not emit a -L argument without - an associated pathname. Link in the math library after the gpu2 - library. - -end-sanitize-sky -Fri Dec 11 09:07:05 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * i386b-nat.c: Include "expression.h". - - * symtab.h: Don't include "gnu-regex.h". - - * solib.c (solib_add_common_symbols): Cast parameters passed to - make_cleanup to use the new make_cleanup_func typedef. - - * inftarg.c: Include "wait.h" after, rather than before, <wait.h>. - "wait.h" was defining all WIF* macro's instead of filling in those - that <wait.h> missed. - -Fri Dec 11 09:52:04 1998 Andrew Cagney <cagney@chook> - - * mipsm3-nat.c, hppah-nat.c, infptrace.c, i386gnu-nat.c, - hppab-nat.c, core-aout.c, arm-xdep.c, alpha-nat.c, altos-xdep.c, - pyr-xdep.c, remote-st.c, remote-os9k.c, tahoe-tdep.c, pyr-tdep.c, - vax-tdep.c: Replace reg_name with REGISTER_NAME. - -Thu Dec 10 15:19:40 1998 David Taylor <taylor@texas.cygnus.com> - - The following changes were made by Jim Blandy <jimb@cygnus.com>, - Edith Epstein <eepstein@cygnus.com>, Elena Zannoni - <ezannoni@cygnus.com> Stan Shebs <shebs@cygnus.com>, and David - Taylor <taylor@cygnus.com>, as part of the project to merge in - changes originally made by HP; HP did not create ChangeLog - entries. - - * annotate.c (annotate_catchpoint): New function. - - * annotate.h (annotate_catchpoint): declare it; add new includes - (symtab.h and gdbtypes.h). - - * buildsym.h: add external var processing_hp_compilation. - - * coff-solib.h: - (SOLIB_REMOVE_INFERIOR_HOOK): new macro. defined to 0. - functionality not implemented for coff. - (SOLIB_CREATE_CATCH_LOAD_HOOK): New macro; generate error msg for coff. - (SOLIB_CREATE_CATCH_UNLOAD_HOOK): ditto. - (SOLIB_HAVE_LOAD_EVENT): ditto. - (SOLIB_LOADED_LIBRARY_PATHNAME): ditto. - (SOLIB_HAVE_UNLOAD_EVENT): ditto. - (SOLIB_UNLOADED_LIBRARY_PATHNAME): ditto. - (SOLIB_IN_DYNAMIC_LINKER): ditto. - (SOLIB_RESTART): ditto. - - * complaints.h: add ifdef...endif pair at beginning and end of file. - - * dstread.c (dst_symfile_read): the parameter to fileno - must be of type FILE *. So cast abfd->iostream in the - call to fileno must be cast as a FILE *, not a GDB_FILE *. - This will work because abfd->iostream is declared and - given a value in bdf and bfd will continue to use FILE - rather than GDB_FILE. - - * dwarf2read.c (dwarf_bool_name): change parameter from bool - to mybool. sigh. - - * expression.h: include symtab.h - - * frame.h (print_only_stack_frame, show_stack_frame, - show_frame_info): add prototypes. - - * gdbcmd.h (togglelist, stoplist): declare. - - * gdbcore.h (read_memory_string): declare it. - (exec_file_attach): add prototype. - - * inflow.c (terminal_is_ours): make non static. - - * minsyms.c: minor spacing change. - - * parser-defs.h (parse_nested_classes_for_hpacc): add prototype. - (find_template_name_end): add prototype. - - * scm-lang.c (scm_unpack): cast svalue to (int). - - * top.h: declare it. - - * valprint.h (print_binary_chars): new prototype definition. - (print_octal_chars): new prototype definition. - (print_decimal_chars): new prototype definition. - -Thu Dec 10 07:14:56 1998 Andrew Cagney <cagney@chook> - - * config/arm/tm-arm.h, arm-tdep.c: Replace REGISTER_NAMES with - REGISTER_NAME. - * mn10300-tdep.c, config/mn10300/tm-mn10300.h: Ditto. - * sh-tdep.c, config/sh/tm-sh.h: Ditto. - - * defs.h (REGISTER_NAME): Provide default for old targets. - * defs.h, infcmd.c: Rename reg_names to gdb_register_names. - - * tracepoint.c, target.c, parse.c, infcmd.c, remote-udi.c, - expprint.c, infcmd.c, printcmd.c, eval.c, stack.c, findvar.c, - remote-udi.c, config/alpha/tm-alpha.h, remote-sim.c, d30v-tdep.c, - config/mips/tm-mips.h, hppa-tdep.c: Use REGISTER_NAME. -start-sanitize-sky - * config/mips/tm-txvu.h, txvu-tdep.c: Ditto. -end-sanitize-sky - -1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com> - - * config/i960/mon960.mt (SIM_OBJS, SIM): Define. - -Tue Dec 8 16:49:24 1998 Stan Shebs <shebs@andros.cygnus.com> - - * NEWS: Add mentions of newly-added configurations. - -1998-12-08 Philippe De Muyter <phdm@macqel.be> - - * config/xm-aix4.h (SIGWINCH_HANDLER): Function `aix_resize_window' - must accept a signal number as parameter. - * config/rs6000/xm-rs6000.h (SIGWINCH_HANDLER): Ditto. - * utils.c (initialize_utils): Give a parameter to `SIGWINCH_HANDLER'. - - * inferior.h (register_valid): Variable's type is `SIGNED char', not - `char'. - * findvar.c (register_valid): Ditto. - - * defs.h (make_cleanup_func): Protect parameter list by `PARAMS'. - * gdbthread.h (unbind_target_thread_vector): Likewise. - -Tue Dec 8 15:09:44 1998 Edith Epstein <eepstein@sophia.cygnus.com> - - Merged in m68k-linux patch from Andreas Schwab - - 1998-12-01 Andreas Schwab <schwab@issan.cs.uni-dortmund.de> - - * Makefile.in, configure.host, configure.tgt: Add support for - m68k-linux. - * config/m68k/linux.mh: New file. - * config/m68k/linux.mt: New file. - * config/m68k/nm-linux.h: New file. - * config/m68k/tm-linux.h: New file. - * config/m68k/xm-linux.h: New file. - * gdb/m68klinux-nat.c: New file. - * gdbserver/low-linux.c: Add support for m68k-linux. - * gdb/config/m68k/tm-m68k.h (NUM_FREGS): New macro. - -1998-12-07 Jason Molenda (jsm@bugshack.cygnus.com) - - * config/i386/xm-cygwin.h: Remove REQUEST_QUIT definition. - * config/powerpc/xm-cygwin.h: Ditto. - -1998-12-07 Jim Blandy <jimb@zwingli.cygnus.com> - - * rs6000-tdep.c (pop_frame): Correctly find the registers saved in - the stack frame. Their offset from the previous stack frame is in - fdata.gpr_offset and fdata.fpr_offset, not fdata.offset. - (gdb.base/return.exp) - * config/rs6000/tm-rs6000.h: Doc fixes. - -1998-12-03 Jason Molenda (jsm@bugshack.cygnus.com) - - * monitor.c (monitor_read_memory): Zero out pattern buffers - before calling re_search. - (parse_register_dump): Ditto. - -Thu Dec 3 10:37:22 EST 1998 Zdenek Radouch (radouch@cygnus.com) - - FR30 updates - still very preliminary. - * configure.tgt - * fr30-tdep.c - * config/fr30/tm-fr30.h - -Thu Dec 3 16:30:35 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * ax-gdb.c: Include target.h. - -Tue Dec 3 10:59:00 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * ax-gdb.c (_initialize_ax_gdb), i960-tdep.c (pop_frame), - monitor.c (flush_monitor_dcache, longlongendswap), remote-array.c - (hexword2ascii), w89k-rom.c (init_w89k_cmds), z8k-tdep.c - (init_frame_pc, extract_return_value): Make return type void. - * monitor.c (monitor_write_even_block): Make return type explicit. - (monotor_read_memory_block): Delete function. - * monitor.h: Update. - * remote.c (remote_get_threadlist, remote_update_threads), - remote-array.c (array_get_packet), remote-rdi.c (Fail): Always - return a value. - * m32r-tdep.c (m32r_fix_call_dummy): From Michael Snyder, void - function. - * jv-valprint.c (java_val_print): From Stu Grossman. Return 0 by - default. - -Wed Dec 2 15:11:38 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * tracepoint.c: Move default definition of - TARGET_VIRTUAL_FRAME_POINTER from here to target.h. - * target.h: Add default definition of TARGET_VIRTUAL_FRAME_POINTER. - * ax-gdb.c (gen_frame_args_address, gen_frame_locals_address): - use TARGET_VIRTUAL_FRAME_POINTER to determine frame pointer. - (gen_trace_for_expr): new argument, address of tracepoint, - gets passed to new_agent_expr and added to struct agent_expr. - (is_nontrivial_conversion): call to new_agent_expr now requires - a dummy argument. (agent_command): use get_current_frame() to - get current PC scope; pass it to gen_trace_for_expr. - * ax-general.c (new_agent_expr): new argument, address of - tracepoint; store it in new field of struct agent_expr. - * ax.h (struct agent_expr): add new field for tracepoint address. - * ax-gdb.h: change prototypes to match above changes. - - * m32r-tdep.c (decode_prologue): If no branch or push fp is found, - but there's a stack adjust, then use that as the end of prologue. - (m32r_skip_prologue): don't skip past the first line if there is - line info. (m32r_virtual_frame_pointer): new function. - (m32r_fix_call_dummy): no return value needed. - -Tue Dec 1 10:59:00 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * ocd.c (remote_timeout), (BDM_BREAKPOINT), monitor.c (readchar), - remote.c: Cleanup closing of open comments. - -Mon Nov 30 16:04:03 1998 Doug Evans <devans@canuck.cygnus.com> - - * config/fr30/tm-fr30.h (INNER_THAN): Add parameters. - -Mon Nov 30 11:18:48 1998 Andrew Cagney <cagney@chook> - - * frame.h (FRAME_CHAIN_VALID): Default to - default_frame_chain_valid. - * blockframe.c (default_frame_chain_valid): New function. - - * frame.h (FRAME_CHAIN_VALID_ALTERNATIVE): Delete references - * blockframe.c (alternate_frame_chain_valid): New function. - * config/mips/tm-mipsv4.h, config/m88k/tm-delta88v4.h, - config/m68k/tm-monitor.h, config/m68k/tm-m68kv4.h, - config/i386/tm-i386v4.h, config/i386/tm-i386nw.h, - config/h8300/tm-h8300.h: Update. - - * blockframe.c (nonnull_frame_chain_valid): New function. - * config/m68k/tm-os68k.h, config/m68k/tm-vx68.h, - config/m68k/tm-apollo68b.h, config/i960/tm-vx960.h, - config/arc/tm-arc.h: Update FRAME_CHAIN_VALID. - - * hppa-tdep.c (frame_chain_valid, hppa_frame_chain_valid), - remote-vx29k.c (get_fp_contents, vx29k_frame_chain_valid), - arm-tdep.c (frame_chain_valid, arm_frame_chain_valid): Rename - functions so that they are name space clean. - * config/pa/tm-hppa.h, config/a29k/tm-vx29k.h, - config/arm/tm-arm.h: Update FRAME_CHAIN_VALID. - - * gould-tdep.c (gould_frame_chain_valid), d30v-tdep.c - (d30v_frame_chain_valid), d10v-tdep.c (d10v_frame_chain_valid): - New functions. - * config/gould/tm-np1.h, config/gould/tm-pn.h, - config/d30v/tm-d30v.h, config/d10v/tm-d10v.h: Update - FRAME_CHAIN_VALID. - -Sun Nov 29 11:18:37 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * z8k-tdep.c (z8k_addr_bits_remove), w65-tdep.c - (w65_addr_bits_remove), h8500-tdep.c (h8500_addr_bits_remove), - m88k-tdep.c (m88k_addr_bits_remove): Function to clean up an - address. - * config/z8k/tm-z8k.h, config/w65/tm-w65.h, config/m88k/tm-m88k.h, - config/h8500/tm-h8500.h: Define ADDR_BITS_REMOVE to call targets - corresponding function. - * z8k-tdep.c (saved_pc_after_call): Update. - -Sat Nov 28 12:24:31 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * config/z8k/tm-z8k.h, config/w65/tm-w65.h, config/vax/tm-vax.h, - config/v850/tm-v850.h, config/tahoe/tm-tahoe.h, - config/sparc/tm-sparc.h, config/sh/tm-sh.h, - config/rs6000/tm-rs6000.h, config/pyr/tm-pyr.h, - config/pa/tm-hppa.h, config/ns32k/tm-umax.h, - config/ns32k/tm-merlin.h, config/none/tm-none.h, - config/mn10300/tm-mn10300.h, config/mn10200/tm-mn10200.h, - config/mips/tm-mips.h, config/m88k/tm-m88k.h, - config/m68k/tm-m68k.h, config/m32r/tm-m32r.h, - config/i960/tm-i960.h, config/i386/tm-i386.h, - config/h8500/tm-h8500.h, config/h8300/tm-h8300.h, - config/gould/tm-pn.h, config/gould/tm-np1.h, config/arm/tm-arm.h, - config/convex/tm-convex.h, config/d10v/tm-d10v.h, - config/alpha/tm-alpha.h, config/a29k/tm-a29k.h: Add parameters to - macro INNER_THAN. - - * valops.c (push_word, value_push, call_function_by_hand), - breakpoint.c (bpstat_stop_status), blockframe.c - (generic_push_dummy_frame, generic_frame_chain_valid), inferior.h - (PC_IN_CALL_DUMMY), infrun.c (wait_for_inferior): Update use of - INNER_THAN. - -Fri Nov 27 11:00:25 1998 Andrew Cagney <cagney@chook> - - * target.h (one_stepped): Move global from here. - * infrun.c (singlestep_breakpoints_inserted_p): To here. Rename. - Make static. - (wait_for_inferior): Update. - (resume): Update. Set variable after call to SOFTWARE_SINGLE_STEP. - - * target.h (NO_SINGLE_STEP): Replace with SOFTWARE_SINGLE_STEP_P - and SOFTWARE_SINGLE_STEP. - * config/sparc/tm-sparc.h, config/rs6000/tm-rs6000.h, - config/arc/tm-arc.h: Update. - * rs6000-tdep.c (rs6000_software_single_step), sparc-tdep.c - (sparc_software_single_step), arc-tdep.c (arc_single_step): New - functions. Replace function single_step. - - * config/mips/tm-mips.h (STEP_SKIPS_DELAY_P): Define. - * infrun.c (proceed): Cleanup. -start-sanitize-sky - * config/mips/tm-txvu.h (STEP_SKIPS_DELAY), txvu-tdep.c - (txvu_step_skips_delay): Change macro to function. -end-sanitize-sky - -Thu Nov 26 11:19:15 1998 Andrew Cagney <cagney@amy.cygnus.com> - - * config/alpha/tm-alpha.h (ABOUT_TO_RETURN): Replace macro. - * alpha-tdep.c (alpha_about_to_return): With new function. - (heuristic_proc_start): Update. - * config/mips/tm-mips.h (ABOUT_TO_RETURN), mips-tdep.c - (heuristic_proc_start, mips_about_to_return): Ditto. - * config/ns32k/tm-merlin.h (ABOUT_TO_RETURN), - config/ns32k/tm-umax.h (ABOUT_TO_RETURN), ns32k-tdep.c - (ns32k_about_to_return, ns32k_get_enter_addr): Ditto. - - * config/z8k/tm-z8k.h, config/w65/tm-w65.h, config/vax/tm-vax.h, - config/tahoe/tm-tahoe.h, config/sparc/tm-sparc.h, - config/sh/tm-sh.h, config/rs6000/tm-rs6000.h, config/pyr/tm-pyr.h, - config/pa/tm-hppa.h, config/m88k/tm-m88k.h, config/m68k/tm-m68k.h, - config/i960/tm-i960.h, config/i386/tm-i386.h, - config/h8500/tm-h8500.h, config/h8300/tm-h8300.h, - config/gould/tm-pn.h, config/gould/tm-np1.h, - config/convex/tm-convex.h, config/arm/tm-arm.h, - config/arc/tm-arc.h, config/a29k/tm-a29k.h: Delete macro - ABOUT_TO_RETURN. - * config/w65/tm-w65.h (RTL, RTS): Delete macros. - * h8500-tdep.c (about_to_return): Delete function. - -Thu Nov 26 11:19:15 1998 Andrew Cagney <cagney@chook.cygnus.com> - - * rs6000-tdep.c (rs6000_breakpoint_from_pc): Change big_breakpoint - and little_breakpoint to char[] from char*. - * remote-array.c (array_insert_breakpoint): Change bp_addr to - CORE_ADDR type. - -Wed Nov 25 00:13:06 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * vx-share/xdr_ld.c (xdr_ldtabl): Cast second arg to char** - instead of char*. - - * configure.tgt (v850): Only build v850ice when cygwin and gui. - * configure.in: Add parameter to --enable-build-warnings. - * configure: Re-build. - - * c-exp.y (parse_number): Rewrite shift to pacify GCC. - - * config/i960/tm-i960.h (BREAKPOINT): Delete definition - simply - wrong. - - * monitor.c (compile_pattern): Make val const char*. - (monitor_wait_cleanup): Make old_timeout void*, pointing at - old_timeout. - (monitor_wait): Update. - - * remote-udi.c, remote-sim.c, remote-e7000.c, hppa-tdep.c, - remote-mips.c, sparcl-tdep.c, xcoffread.c: Cast parameters passed - to make_cleanup to use the new make_cleanup_func typedef. - - * alpha-tdep.c (MASK): Use LONGEST to avoid arithmetic overflow. - - * config/a29k/tm-a29k.h (TRANSPARENT): Rename macro to - TRANSPARENT_FRAME. Avoid name-space clash. - * a29k-tdep.c (init_frame_info): Update. - -Wed Nov 25 20:37:00 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * rs6000-tdep.c (rs6000_breakpoint_from_pc): Change big_breakpoint - and little_breakpoint to char[] from char*. - * mem-break.c (memory_insert_breakpoint, - memory_remove_breakpoint): Pass address of bplen. - * remote-array.c (array_insert_breakpoint): Change bp_addr to - CORE_ADDR type. - -start-sanitize-vr4xxx -1998-11-24 Gavin Romig-Koch <gavin@cygnus.com> - - * configure.tgt: Handle mips64*vr4xxx. - -end-sanitize-vr4xxx -Tue Nov 24 15:46:33 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * config/mn10300/tm-mn10300.h (TARGET_VIRTUAL_FRAME_POINTER): - new target macro. - * mn10300-tdep.c (mn10300_virtual_frame_pointer): new function. - * tracepoint.c (encode_actions): Use the new target macro to - determine the virtual frame pointer, for collecting locals/args. - (add_local_symbols, collect_symbol): add a register/offset pair of - arguments so that the virtual frame pointer can be passed in. - -1998-11-24 Felix Lee <flee@cygnus.com> - - * procfs.c (procfs_wait): handle syscall events first. - - * procfs.c (GDB_GREGSET_TYPE, GDB_FPREGSET_TYPE): new macros. - * config/sparc/xm-sun4sol2.h: use them. - * core-sol2.c: don't #undef gregset_t and fpregset_t. - * sol-thread.c: ditto. - * sparc-tdep.c: ditto. - -Tue Nov 24 14:13:10 1998 Andrew Cagney <cagney@chook> - - * breakpoint.c (memory_breakpoint_size): Delete global. - (read_memory_nobpt): Determine real breakpoint address and size - using BREAKPOINT_FROM_PC. - - * defs.h (breakpoint_from_pc_fn): BREAKPOINT_FROM_PC function - template. - * target.h, mem-break.c (memory_breakpoint_from_pc): - Rewrite. Always define. Return NULL when memory breakpoints are - not supported. - (memory_insert_breakpoint, memory_remove_breakpoint): Call - BREAKPOINT_FROM_PC. - * target.h (BREAKPOINT_FROM_PC): Provide default. - * gdbint.texinfo (BREAKPOINT_FROM_PC): Document. - - * config/rs6000/tm-rs6000.h (BREAKPOINT): Delete macro. - (BREAKPOINT_FROM_PC): Define. - ({BIG,LITTLE}_BREAKPOINT): Move macros from here. - * rs6000-tdep.c: To here. - (rs6000_breakpoint_from_pc): New function. - - * config/mn10300/tm-mn10300.h (BREAKPOINT): Delete macro. - (BREAKPOINT_FROM_PC): Define, call. - * mn10300-tdep.c (mn10300_breakpoint_from_pc): New function. - - * config/mips/tm-mips.h ({BIG,LITTLE}_BREAKPOINT, - IDT_{BIG,LITTLE}_BREAKPOINT, PMON_{BIG,LITTLE}_BREAKPOINT, - MIPS16_{BIG,LITTLE}_BREAKPOINT): Move macros from here. - * mips-tdep.c: To here. -start-sanitize-sky - * txvu-tdep.c (core_break_insn): Delete variable. - (txvu_insert_breakpoint): Update, use BREAKPOINT_FROM_PC. -end-sanitize-sky - - * config/arm/tm-arm.h ({BIG,LITTLE}_BREAKPOINT): Delete macros. - ({ARM,THUMB}_{BE,LE}_BREAKPOINT): Move macros from here. - * arm-tdep.c: To here. - - * remote-array.c (memory_breakpoint_size): Delete variable. - (array_insert_breakpoint): Obtain breakpoint size using - BREAKPOINT_FROM_PC. - * remote-st.c (memory_breakpoint_size, st2000_insert_breakpoint): - Ditto. - * remote-os9k.c (memory_breakpoint_size, - rombug_insert_breakpoint): Ditto. - * remote-e7000.c (memory_breakpoint_size): Ditto. - -Mon Nov 23 11:38:40 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * symfile.c (deduce_language_from_filename): rewrite so as to - work from a table of filename extensions, modifiable by the user. - (filename_language_table): new data structure. - (set_ext_lang_command): new function for new command, "set - extension-language". (info_extension_language_command): new - function for new command "info extension-languages". - (add_filename_language, init_filename_language_table): new - support functions for the above. - * language.c (language_enum): new function. Support for above. - -Mon Nov 23 10:47:54 1998 Andrew Cagney <cagney@chook.cygnus.com> - - * config/sh/tm-sh.h, config/mn10200/tm-mn10200.h, - config/m32r/tm-m32r.h, config/arm/tm-arm.h, config/i960/tm-i960.h, - config/gould/tm-np1.h, config/d10v/tm-d10v.h, - config/v850/tm-v850.h, config/pa/tm-hppa.h, config/a29k/tm-a29k.h, - config/mn10300/tm-mn10300.h, config/mips/tm-mips.h - (USE_STRUCT_CONVENTION): Cleanup, define macro as function. - - * sh-tdep.c (sh_use_struct_convention), mn10200-tdep.c - (mn10200_use_struct_convention), i960-tdep.c - (i960_use_struct_convention), gould-tdep.c - (gould_use_struct_convention), d10v-tdep.c - (d10v_use_struct_convention), v850-tdep.c - (v850_use_struct_convention), hppa-tdep.c - (hpha_use_struct_convention), m32r-tdep.c - (m32r_use_struct_convention), arm-tdep.c - (arm_use_struct_convention), mn10300-tdep.c - (mn10300_use_struct_convention), a29k-tdep.c - (a29k_use_struct_convention), mips-tdep.c - (mips_use_struct_convention): New functions - - * value.h, values.c (generic_use_struct_convention): New function, - replace macro. - * values.c (USE_STRUCT_CONVENTION): Macro defaults to function - generic_use_struct_convention. - -Sat Nov 21 17:15:40 1998 Philippe De Muyter <phdm@macqel.be> - - * breakpoint.c (bpstat_stop_status): Do not increment hit_count - of breakpoint if condition is not true. - - * coffread.c (coff_symtab_read): Discard C_LABEL's that are not - function entry points, to avoid getting them in the stack dump - instead of the actual function. - - * config/m68k/delta68.mh (NAT_FILE): Undo 1998-08-18 change; - without NAT_FILE definition, configure will assume that GDB cannot - run native. - * config/m68k/nm-delta68.h (KERNEL_U_SIZE): New macro. - * delta68-nat.c (kernel_u_size): New function. - -Fri Nov 20 10:13:03 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * buildsym.c (end_symtab): Cleanup PROCESS_LINENUMBER_HOOK. - -Thu Nov 19 15:21:04 1998 Geoffrey Noer <noer@cygnus.com> - - * rdi-share/host.h: if compiling under Cygwin, make sure new - preprocessor define is defined. Define it if not. - * rdi-share/hostchan.h: ditto - * rdi-share/aclocal.m4: regenerate - * rdi-share/configure: regenerate - -Thu Nov 19 14:43:44 1998 Geoffrey Noer <noer@cygnus.com> - - * configure.in: switch back to checking __CYGWIN32__ - * configure: regenerate - -Thu Nov 19 09:53:00 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * exec.c (exec_file_command): Cleanup. Replace #if - NEED_TEXT_START_END with if(). - * config/pa/nm-hppah.h (NEED_TEXT_START_END): Redefine to be 1. - * config/convex/tm-convex.h (NEED_TEXT_START_END): Ditto. - * config/gould/tm-np1.h (NEED_TEXT_START_END): Ditto. - * config/a29k/tm-a29k.h (NEED_TEXT_START_END): Ditto. - -Thu Nov 19 13:06:22 1998 Geoffrey Noer <noer@cygnus.com> - - * main.c: Wait until more time has passed before calling - new cygwin_ funcs, revert back to the cygwin32_ ones for now. - * win32-nat.c: Ditto. - -Wed Nov 18 15:03:17 1998 Andrew Cagney <cagney@chook.cygnus.com> - - * 29k-share/udi/udip2soc.c (UDIConnect): Replace sys_errlist with - strerror. - -Mon Nov 16 14:17:05 1998 Geoffrey Noer <noer@cygnus.com> - - * defs.h: if compiling under Cygwin, define __CYGWIN__ if - __CYGWIN32__ is defined and __CYGWIN__ isn't for backwards - compatibility. - -Fri Nov 13 00:15:08 1998 Geoffrey Noer <noer@cygnus.com> - - Changes to account for name change from cygwin32 to cygwin and - clean up Win32-related ifdefs. - - * configure.tgt: check for cygwin* instead of cygwin32. - New cygwin gdb_target variable loses the "32". - * configure.host: check for cygwin* instead of cygwin32. - New cygwin gdb_host variable loses the "32". - * configure.in: test __CYGWIN__ instead of __CYGWIN32__, - rename gdb_cv_os_cygwin32 variable to drop the "32". Call - AM_EXEEXT instead of AC_EXEEXT since that isn't in a released - autoconf yet. - * configure: regenerate. - - * main.c: drop "32" from cygwin_ funcs, include sys/cygwin.h where - cygwin path conv protos live, instead of adding a proto here for - them here. - * {main.c, ser-tcp.c, ser-unix.c, top.c}: check __CYGWIN__ - instead of __CYGWIN32__. - * source.c: thoughout, check _WIN32 instead of WIN32. - - * config/i386/cygwin32.mh: delete. - * config/i386/cygwin.mh: new file, was cygwin32.mh. - * config/i386/cygwin32.mt: delete. - * config/i386/cygwin.mt: new file, was cygwin32.mt. - * config/i386/tm-cygwin32.h: delete. - * config/i386/tm-cygwin.h: new file, was tm-cygwin32.h. - * config/i386/xm-cygwin32.h: delete. - * config/i386/xm-cygwin.h: new file, was xm-cygwin32.h. - * config/i386/xm-windows.h: #include xm-cygwin.h now. - * config/powerpc/cygwin32.mh: delete. - * config/powerpc/cygwin.mh: new file, was cygwin32.mh. - * config/powerpc/cygwin32.mt: delete. - * config/powerpc/cygwin.mt: new file, was cygwin32.mt. - * config/powerpc/tm-cygwin32.h: delete. - * config/powerpc/tm-cygwin.h: new file, was tm-cygwin32.h. - * config/powerpc/xm-cygwin32.h: delete. - * config/powerpc/xm-cygwin.h: new file, was xm-cygwin32.h. - - * rdi-share/aclocal.m4: regenerate with aclocal. - * rdi-share/configure: regenerate with autoconf. - * rdi-share/{host.h, hostchan.c, hostchan.h, serdrv.c, serpardr.c, - unixcomm.c}: check __CYGWIN__ instead of __CYGWIN32__. - -Thu Nov 12 17:19:43 1998 John Metzler <jmetzler@cygnus.com> - - * remote.c (remote_get_threadinfo): Support for remote - multithread debugging. - (remote_get_threadlist): get a partial list of threads - (remote_threadlist_iterator): Step through all the threads - (init_remote_threadtests): Optional builtin unit test commands. - - * thread.c (bind_target_thread_vector): Implementa a more dynamic - way of accessing target specific thread info functions than - FIND_NEW_THREADS. - (target_thread_info): Function to get extended thread information. - - * gdbthread.h: Export internal data structures corresponding to - external detailed thread info response. This is more like a 'ps' - command than what might be expected of host based threads. This - is for embedded systems. - -Wed Nov 11 15:47:00 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * procfs.c (proc_set_exec_trap): don't set PR_ASYNC or PR_FORK - in the child process for UnixWare (causes processes forked by - the debuggee to hang). - -Mon Nov 9 12:00:36 1998 Dave Brolley <brolley@cygnus.com> - - * config/fr30/fr30.mt: New file. - * config/fr30/tm-fr30.h: New file. - -1998-11-05 Jim Wilson <wilson@cygnus.com> - - * remote-vx.c (net_read_registers, net_write_registers, - vx_xver_memory, vx_resume, vx_attach, vx_detach, vx_kill): - Change errno to errno_num. - * vx-share/xdr_ptrace.c (xdr_ptrace_return): Likewise. - * vx-share/xdr_ptrace.h (struct ptrace_return): Likewise. - -Thu Nov 5 08:41:33 1998 Christopher Faylor <cgf@cygnus.com> - - * top.c (gdb_readline): Allow CRLF line termination on systems - which define CRLF_SOURCE_FILES. - * win32-nat.c: 1) Add thread support, 2) fix ability to attach to - a running process, and 3) implement limited support for cygwin - signals. - (thread_rec): New function. - (child_add_thread): Ditto. - (child_init_thread_list): Ditto. - (child_delete_thread): Ditto. - (do_child_fetch_inferior_registers): Ditto. - (do_child_store_inferior_registers): Ditto. - (handle_output_debug_string): Ditto. - (child_fetch_inferior_registers): Use do_* function to perform - operation. - (child_store_inferior_registers): Ditto. - (child_continue): Ditto. - (child_thread_alive): Ditto. - (cygwin_pid_to_str): Ditto. - (handle_load_dll): Reorganize, add first attempt at reading - dll names from attached processes. Change info messages to provide - more information when dll is already loaded. - (handle_exception): Changes mandated by new thread-aware structures. - (child_wait): Track thread creation/destruction. Handle cygwin - signals. - (child_create_inferior): Ditto. - (child_resume): Ditto. - (child_kill_inferior): Ditto. Close child process handle to avoid a - handle leak. - (child_ops): Fill out child_ops fields that deal with threads. - * config/i386/tm-cygwin32.h: Declare function and macro needed - for converting a cygwin "pid" to a string. - * config/i386/xm-cygwin32.h: define HAVE_SIGSETMASK as 0 since - sigsetmask is not defined in cygwin. - -Thu Nov 5 08:38:18 1998 Christopher Faylor <cgf@cygnus.com> - - * win32-nat.c: Remove obsolete PPC conditionals. - -Wed Nov 4 18:44:31 1998 Dave Brolley <brolley@cygnus.com> - - * configure.tgt: Add fr30-*-elf*. - -1998-11-03 Jim Wilson <wilson@cygnus.com> - - * c-exp.y (parse_number): Check TARGET_LONG_LONG_BIT when setting - high_bit to avoid undefined negative shift. - -Mon Nov 2 15:26:33 1998 Geoffrey Noer <noer@cygnus.com> - - * configure.in: Check cygwin* instead of cygwin32*. - * configure: regenerate - -Thu Oct 29 10:04:20 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - [Support for trace debugging: registers that were not collected.] - * remote.c (remote_fetch_registers): accept 'xxxx' in the register - packet, with the meaning "register value is not available". - Set register_valid to -1, which will connote "no value available". - * findvar.c (read_relative_register_raw_bytes): return failure if - register_valid == -1. (value_of_register): return failure if - register_valid == -1. (read_var_value): return error if - value_of_register fails for a register variable. - (value_from_register): return failure if register_valid == -1. - * eval.c (evaluate_subexp_standard): return error if - value_of_register fails for a register used in an expression. - * infcmd.c (do_registers_info): display "value not available" - for registers for which register_valid == -1. - - * tracepoint.c (set_raw_tracepoint): just save the filename as is - from the symbol table, rather than trying to prepend the dir name. - Also save the bfd section. (tracepoints_info): use the section - when looking up the function name. - * tracepoint.h: add section field to tracepoint struct. - -start-sanitize-sky -Wed Oct 28 12:33:52 EST 1998 Frank Ch. Eigler <fche@cygnus.com> - - * configure.in: Accept both -skyb- and -sky- for - --with-sim-funit/gpu2 options. - * configure: Rebuilt. - -end-sanitize-sky -Wed Oct 28 08:01:38 1998 Mark Alexander <marka@cygnus.com> - - * sparcl-tdep.c (send_resp, sparclite_serial_start, - sparclite_serial_write): Use remote_timeout instead of hardcoded - two second timeout. - (download): Fix adjustment of a.out load addresses. - -Wed Oct 28 12:32:58 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * configure.in (--enable-build-warnings): Finish rename from - --enable-warnings. - (enable-build-warnings): Add -Wpointer-arth, allow =* for - sim/common compatibility. - * configure: Re-generate. - -Wed Oct 21 08:44:30 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * 29k-share/udi/udip2soc.c: Replace sys_errlist with strerror(). - -Thu Oct 22 09:56:55 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * config/rs6000/aix4.mh (NATDEPFILES): Move xcoffread.o from here. - * config/rs6000/aix4.mt (TDEPFILES): To here. - -Wed Oct 21 10:02:31 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * rdi-share/unixcomm.c: Provide definitions of SERPORT and PARPORT - on BSD hosts. - -1998-10-19 Jason Molenda (jsm@bugshack.cygnus.com) - - * configure.in (AM_EXEEXT): Use AC_EXEEXT instead. - * configure: Regenerated. - -Sat Oct 17 17:39:23 1998 Felix Lee <flee@cygnus.com> - - * core-sol2.c: #include <sys/types.h>, for sol2.7 weirdness. - -Fri Oct 16 15:31:38 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * m32r-tdep.c (decode_prologue): Return failure if we reach - the end of the function without finding the end of the prologue. - -1998-10-16 Jason Molenda (jsm@bugshack.cygnus.com) - - * command.c copying.c copying.awk core-aout.c core-regset.c - corelow.c dcache.c i386-tdep.c i386v4-nat.c i387-tdep.c - infcmd.c infptrace.c infrun.c remote.c solib.c symfile.c - symmisc.c valarith.c: Add prototypes. - - * defs.h: Add prototype for utils.c::do_run_cleanups. - - * gdbtypes.c: Add prototypes. - (make_pointer_type): Add braces to remove nested if-else ambiguity. - (make_reference_type): Ditto. - - * printcmd.c (printf_command): Initialize 'f' and 'string' at - function startup to suppress possibly-used-before-initialized warning. - - * remote-utils.c: Add prototypes. - (sr_pollchar): Add braces to remove nested if-else ambiguity. - - * ser-tcp.c: Add prototypes. - (wait_for): Add braces to remove nested if-else ambiguity. - (tcp_readchar): Ditto. - - * ser-unix.c: Add prototypes. - (get_tty_state): Don't define errno here. - (hardwire_readchar): Only define 't' if we are compiling in a Cygwin - environment. - - * symtab.c: Add prototypes. - (find_methods): Add braces to remove nested if-else ambiguity. - (search_symbols): Set 'i' to an initial value to suppress a - possibly-used-before-initialized warning. - - * valops.c: Add prototypes. - (value_cast): Set 'eltype2' to an initial value to suppress a - possibly-used-before-initialized warning. - (value_of_variable): Add braces to remove nested if-else ambiguity. - (value_of_this): Ditto. - - * valprint.c: Add prototypes. - (print_floating): Add braces to remove nested if-else ambiguity. - -Thu Oct 15 19:50:48 1998 Stan Shebs <shebs@andros.cygnus.com> - - * tm-sp64.h (SETUP_ARBITRARY_FRAME, FRAME_SPECIFICATION_DYADIC): - Remove, nevermore used. - -Thu Oct 15 16:55:00 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * command.c: Include "wait.h" after, rather than before, <wait.h>. - "wait.h" was defining all WIF* macro's instead of filling in those - that <wait.h> missed. - -1998-10-14 Jason Molenda (jsm@bugshack.cygnus.com) - - * defs.h: Move _initialize_printcmd, _initialize_stack, - _initialize_blockframe out of here and in to their respective .c - files. - * blockframe.c: Move _initialize_blockframe prototype to here. - * printcmd.c: Move _initialize_printcmd prototype to here. - * stack.c: Move _initialize_stack prototype to here. - - * source.c, symtab.h: Move _initialize_source prototype to the .c - file. - * values.c, value.h: Move _initialize_values prototype to the .c file. - * gdbthread.h, thread.c: Move _initialize_thread prototype to the .c - file. - * breakpoint.c, breakpoint.h: Move _initialize_breakpoint prototype - to the .c file. - - * abug-rom.c alpha-nat.c alpha-tdep.c annotate.c ax-gdb.c bcache.c: - Standardize comments for the prototype section of these files. - - * configure.in: Look in libc for wctype before looking for it in libc. - -Tue Oct 13 18:56:51 1998 Felix Lee <flee@cygnus.com> - - * sol-thread.c (ps_pstop, etc): simple test for proc_service.h - version didn't work for sol2.6; pushed it to autoconf. - * configure.in (gdb_cv_proc_service_is_old): new test. - * acconfig.h (PROC_SERVICE_IS_OLD): new define. - * configure, config.in: regenerate. - -1998-10-13 Jason Molenda (jsm@bugshack.cygnus.com) - - * blockframe.c (find_pc_sect_partial_function): Add braces to avoid - possible nested-if confusion. - * breakpoint.c (breakpoint_here_p): Ditto. - (breakpoint_inserted_here_p): Ditto. - (breakpoint_thread_match): Ditto. - - * gnu-regex.c: Define _REGEX_RE_COMP only if it isn't already defined. - * gnu-regex.h: Define _REGEX_RE_COMP to pick up old compatability - prototypes. - - * symtab.h: Add prototype for _initialize_source. - * value.h: Add prototype for _initialize_value. - - * defs.h: Include sys/types.h or stddef.h to get size_t. - (make_cleanup): Add make_cleanup_func typedef and switch to using - a prototype for this function. - (mfree): Add prototypes for mmalloc, mrealloc, mfree if we aren't - using mmalloc. - - * ax-gdb.c breakpoint.c coffread.c corelow.c dbxread.c - dwarf2read.c dwarfread.c elfread.c eval.c exec.c infcmd.c infrun.c - mipsread.c nlmread.c os9kread.c parse.c printcmd.c symfile.c - symmisc.c symtab.c thread.c top.c tracepoint.c typeprint.c - valops.c: Cast parameters passed to make_cleanup to use the new - make_cleanup_func typedef. - -Tue Oct 13 00:51:48 1998 Felix Lee <flee@cygnus.com> - - * sol-thread.c (ps_pstop, etc): different solaris versions have - slightly different prototypes in proc_service.h; compensate. - -1998-10-12 Jason Molenda (jsm@bugshack.cygnus.com) - - * Makefile.in (AWK): Unused; remove. - * configure.in: Remove unused autoconf checks for MINIX, memcpy, - poll, select, strings.h. - * config.in: Regenerated. - * configure: Regenerated. - -1998-10-12 Jason Molenda (jsm@bugshack.cygnus.com) - - * configure.in: Check for sys/debugreg.h, asm/debugreg.h. - * i386v-nat.c: Include asm/debugreg.h, sys/debugreg.h if it is not - present. - -Sun Oct 11 12:08:07 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> - - * dwarf2read.c (dwarf2_build_psymtabs_hard): Do not adjust the - address range of a compilation unit without children. - - * mdebugread.c (parse_partial_symbols): Fix handling of stabs - continuations, use xmalloc and xrealloc. - -Fri Oct 9 18:14:43 1998 Mark Alexander <marka@cygnus.com> - - * rs6000-tdep.c: Don't include tm.h twice. - -1998-10-08 Keith Seitz <keiths@cygnus.com> - - * main.c (main): Remove calls to {pre,post}_add_symbol_hooks. - There should be sufficient information/hooks now to eliminate - this hack. - - * exec.c (file_command): Add a new hook here to inform ui's - when the exec file has changed. Adding it here allows the - ui to be informed after symbol reading. - - * gdbcore.h: Add declaration of file_changed_hook. - -Thu Oct 8 08:40:42 1998 Mark Alexander <marka@cygnus.com> - - * rs6000-tdep.c (get_saved_register): Define only if - USE_GENERIC_DUMMY_FRAMES is defined. - -start-sanitize-carp -Tue Oct 6 21:35:10 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * configure.in (--enable-targets): New config option. Code taken - from ../opcode/configure.in. -start-sanitize-cygnus - (--enable-carp): New config option. Overrides configure.tgt and - sets gdb_target + gdb_target_cpu to carp. XXX - this is tempoary. -end-sanitize-cygnus - * configure: Re-generate. - - * Makefile.in (DEPFILES): Add TARGET_OBS. - (TARGET_OBS): Defined by configure. - -start-sanitize-cygnus - * config/carp/carp.mt, config/carp/tm-carp.h: Pseudo configuration - for carp target. XXX - this is tempoary. -end-sanitize-cygnus - -end-sanitize-carp -1998-10-06 Jason Molenda (jsm@bugshack.cygnus.com) - - Eliminate a few warnings from the compiler. - * breakpoint.h: Add prototype. - * breakpoint.c (do_enable_breakpoint): cast mem_cnt, i to (void). - * configure.in: Check if strdup declaration is necessary. - * configure: Regenerated. - * defs.h: Add prototypes. - * gdb_string.h: Only define strdup if necessary. - * gdbthread.h: Add prototypes. - * printcmd.c: Add prototyptes. - (disassemble_command): Remove unused variable 'section'. - * symtab.c: Add prototypes. - * symtab.h: Include gnu-regex.h, add prototype. - * thread.c: Add prototype. - -Mon Oct 5 19:44:39 1998 Stan Shebs <shebs@andros.cygnus.com> - - From David Purves <purves@apogee.com>: - * stabsread.c (rs6000_builtin_type): Create a complex float instead - of an error. - (read_sun_floating_type): Similarly. - (read_range_type): Create a complex float if self_subrange is - true. - -Fri Oct 2 19:42:31 1998 Stu Grossman <grossman@babylon-5.cygnus.com> - - * c-lang.c (emit_char c_printchar c_printstr), c-lang.h (c_printstr) - ch-lang.c (chill_printstr chill_printchar) c-valprint.c (c_val_print) - ch-valprint.c (chill_val_print) expprint.c (print_subexp) f-lang.c - (f_printstr f_printchar emit_char) f-valprint.c (f_val_print) - jv-lang.c (java_printchar java_emit_char) jv-valprint.c - (java_value_print java_val_print) language.c (unk_lang_printchar - unk_lang_printstr unk_lang_emit_char) language.h (struct - language_defn LA_PRINT_STRING LA_EMIT_CHAR) m2-lang.c (m2_printstr - m2_printchar emit_char) printcmd.c (print_formatted) scm-lang.c - (scm_printstr) valprint.c (val_print_string) value.h - (val_print_string): Add emit_char routines to language_desc struct - to allow finer control over language specific character output issues. - Add character width arg to printstr routines to allow handling of - wchar_t/Unicode strings. Fix c_printstr to handle wide characters. - Supply width argument to LA_PRINT_STRING and val_print_string. - - * jv-lang.c (java_object_type dynamics_objfile java_link_class_type - get_dynamics_objfile get_java_object_type) jv-lang.h - (get_java_object_type): Make lots of things static. - - * expprint.c (dump_prefix_expression dump_subexp): Move opcode name - printing to common routine (op_name). - * (dump_subexp): Add support for OP_SCOPE. - -Fri Oct 2 16:25:54 1998 Stan Shebs <shebs@andros.cygnus.com> - - * configure.host (i[3456]86-*-windows): Remove, no longer used. - * mswin: Remove directory, no longer used. - -Fri Oct 2 18:52:20 1998 Fernando Nasser <fnasser@cygnus.com> - - * sol-thread.c: Fixed prototypes and calls to supply_fpregset and - fill_fpregset - -1998-10-02 Keith Seitz <keiths@cygnus.com> - - * remote.c (remote_interrupt): Rewrite to use remote_stop. - (remote_interrupt_twice): Remove. remote_stop now handles it. - (remote_stop): New function which handles interrupting the - remote target so that CLUI and GUI use the same core functions - to achieve the same goal. - (remote_wait): Change to handle remote_stop properly. - [interrupted_already]: New static global to help remote_stop. - [remote_ops, extended_remote_ops]: Add remote_stop for to_stop member. - - * target.c: Rename static function "ignore" to "target_ignore" and - export it so that gdb can determin if some target vector member is - actually not defined. Replace all occurances of ignore. - - * target.h: Export target_ignore. - -Fri Oct 2 03:51:48 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> - - * target.c (target_xfer_memory): Handle requests with zero - transfer length right away. - - * values.c (unpack_double): Set up code, length and signedness of - type _after_ checking for typedef. - -Thu Oct 1 15:39:27 EDT 1998 Frank Ch. Eigler <fche@cygnus.com> - - * breakpoint.c (bpstat_stop_status): Do not consider an - untripped watchpoint as a "hit". - -Thu Oct 1 20:52:39 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * exec.c (exec_file_command), convex-tdep.c (exec_file_command), - arm-xdep.c (exec_file_command), remote-rdp.c - (remote_rdp_create_inferior), remote-os9k.c - (rombug_create_inferior), remote-mm.c (mm_create_inferior), - remote-eb.c (eb_create_inferior), remote-es.c - (es1800_create_inferior), remote-rdi.c (arm_rdi_create_inferior), - remote-sim.c (gdbsim_create_inferior), remote-utils.c - (gr_create_inferior), remote-st.c (st2000_create_inferior), - remote-nindy.c (nindy_create_inferior), remote-hms.c - (hms_create_inferior), remote-e7000.c (e7000_create_inferior), - remote-array.c (array_create_inferior), remote-adapt.c - (adapt_create_inferior): Replace "exec" with "executable" in - messages. - -1998-09-25 Keith Seitz <keiths@cygnus.com> - - * rdi-share/unixcomm.c: If using cygwin32, also use the SERPORT and - PARPORT defines for win32. - (Unix_MatchValidSerialDevice): For cygwin32, valid serial port names - start with "com", not "/dev/tty". - (Unix_OpenSerial): Do not use O_NONBLOCK on cygwin32. - - * rdi-share/devsw.c (DevSW_Close): Free the device's state - (SwitcherState) so that the device may be reopened. - - * remote-rdi.c (mywritec): Send all output through gdb's *_unfiltered - functions, ignoring non-ASCII chars, so that non-tty UI's can snarf - the output from fputs_hook. - (mywrite): Ditto. - (arm_rdi_open): Set inferior_pid. - (arm_rdi_detach): Pop the target off the target stack so that - users can attach and detach multiple times. - (arm_rdi_close): Close the opened device and reset inferior_pid, too. - -1998-09-24 Jason Molenda (jsm@bugshack.cygnus.com) - - * configure.in: Change --enable-warnings to --enable-build-warnings. - * configure: Updated. - -1998-09-24 Jason Molenda (jsm@bugshack.cygnus.com) - - * configure.in (WARN_CFLAGS): Add -Wmissing-prototypes. - * configure: Regenerated. - -1998-09-24 Jason Molenda (jsm@bugshack.cygnus.com) - - * configure.in: Add --enable-warnings. - Adjust whitespace of other --with and --enable options so that - configure --help lines up correctly. - * aclocal.m4: Ditto. - * Makefile.in (WARN_CFLAGS): Add. Set by configure. - * configure: Regenerated. - -Thu Sep 24 15:44:34 1998 Stan Shebs <shebs@andros.cygnus.com> - - * remote-rdi.c: Fix formatting, remove some commented-out code. - (init_rdi_ops): Omit needless initializations. - -Wed Sep 23 18:21:03 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * remote.c (remote_address_masked): New function - mask address - according to REMOTE_ADDRESS_SIZE. - (remote_address_size): New global. - (hexnumstr): New function - convert arbitrary unsigned to hex. - (remote_write_bytes, remote_read_bytes): Use hexnumstr to - construct packet address. Mask address when necessary. - (_initialize_remote): Add "set remoteaddresssize" command, set - REMOTE_ADDRESS_SIZE variable. - - * NEWS: Update. - -Wed Sep 23 18:08:52 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * remote.c (_initialize_remote, packet_command, print_packet): - Pretty print code. - -Wed Sep 23 12:32:54 1998 <cagney@amy.cygnus.com> - - * remote.c (packet_command): Test REMOTE_DESC to determine if - remote connection is open. - -Tue Sep 22 22:27:24 1998 Mark Alexander <marka@cygnus.com> - - Patch from Dawn Perchik <dawn@cygnus.com>: - * rs6000-tdep.c (pop_frame): Handle generic dummy frames. - (push_arguments): Likewise. - (frame_saved_pc): Likewise. - (rs6000_frame_chain): Likewise. - (ppc_push_return_address): New function. - (get_saved_register): New function. - * config/powerpc/tm-ppc-eabi.h: Add generic dummy frame macros. - -Mon Sep 21 19:29:32 1998 Stu Grossman <grossman@babylon-5.cygnus.com> - - * defs.h utils.c (fputc_filtered): New function. Does the obvious... - * jv-lang.c (java_printchar): Fix output of chars > 0xff. Fold - java_emit_char into java_printchar. - * language.h (PRINT_LITERAL_FORM): Reformat for readability. - -Mon Sep 21 14:38:03 1998 Catherine Moore <clm@cygnus.com> - - * config/arm/tm-arm.h (*_BREAKPOINT): Define both little endian - and big endian breakpoint patterns. - - * arm-tdep.c (arm_break_point_from_pc): Insert either big endian - or little endian breakpoints depending upon target byte order. - -start-sanitize-sky -Sun Sep 20 23:11:41 1998 Ron Unrau <runrau@cygnus.com> - - * incorporate SKY-B changes (makes dual maintenance easier). - * txvu-tdep.c (check_overlap): new function to guarantee that - overlays are either mapped or unmapped in their entirety. - * txvu-tdep.c (compress_blockvector): compress blockvectors correctly - -end-sanitize-sky -Fri Sep 18 07:53:08 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> - - * sol-thread.c (sol_thread_notice_signals): Use PIDGET when - passing pid down to procfs_notice_signals. - -Wed Sep 16 14:57:14 1998 Stu Grossman <grossman@babylon-5.cygnus.com> - - * stabsread.c (resolve_symbol_reference): Return 1 on success, 0 on - failure. - * (define_symbol): Check return value from resolve_symbol_reference, - and drop symbol if it fails. - -Tue Sep 15 15:24:16 1998 Stu Grossman <grossman@fencer.cygnus.com> - - * stabsread.c: Make all complaints static. - * Fix formatting of live range splitting code. - * (resolve_symbol_reference define_symbol resolve_live_range): Change - errors to complaints so that bad live range symbols won't abort the - entire symbol table. Handle errors by aborting just the current - symbol. - * (ref_init): Goes away. Folded into ref_add(). - * (REF_MAP_SIZE): Put parens around parameter so that args like - `1 + 2' get handled correctly (yes, this was a real bug). - * (ref_add): Remove check for allocation failures. Not necessary - when using xrealloc(). Fix pointer arithmetic problem when clearing - memory. This and the previous patch prevent random SEGV's when there - are lots of live range symbols. - -Tue Sep 15 14:02:01 1998 Nick Clifton <nickc@cygnus.com> - - * remote-rdi.c: Prevent multiple attempts to close the remote - connection. - -Tue Sep 15 10:24:17 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * printcmd.c (examine_i_type): New static - type for instructions. - (do_examine): For "i" format, specify examine_i_type. - (do_examine): Call value_at_lazy instead of value_at so that - examine data is only fetched if it is used. - (x_command): If examine data was not fetched, set convenience - variable "__" to void. - (_initialize_printcmd): Initialize examine_i_type. - -Sun Sep 13 01:34:59 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * blockframe.c (find_pc_sect_partial_function): use bfd section - of msymbol for end of section comparison. - -Fri Sep 11 14:02:49 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * tracepoint.c: clean up several unused variables and such. - -Fri Sep 11 12:38:34 EDT 1998 Zdenek Radouch (radouch@cygnus.com) - - * arm-tdep.c (arm_push_arguments): fixed frame construction - -Thu Sep 10 20:51:23 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * mn10300-tdep.c (mn10300_analyze_prologue): guard against NULL. - -Wed Sep 9 19:37:36 1998 Stan Shebs <shebs@andros.cygnus.com> - - * dbxread.c (IGNORE_SYMBOL): Remove definition, is never used. - * os9kread.c: Remove comment mentioning IGNORE_SYMBOL. - -Wed Sep 9 11:39:05 1998 Ron Unrau <runrau@cygnus.com> - - * blockframe.c(find_pc_sect_partial_function): look for min syms in - the same section when trying to guess the end of a function. - * symfile.c(list_overlays_command): use print_address_numeric - * remote-sim.c: export simulator_command -start-sanitize-r5900 - * tm-r5900.h: add COP0 registers -end-sanitize-r5900 -start-sanitize-sky - * txvu-tdep.c: printvector and printvector-order commands - * tm-txvu.h: add COP0 registers - * mips-tdep.c: use NUM_CORE_REGS -end-sanitize-sky - -1998-09-08 Jason Molenda (jsm@bugshack.cygnus.com) - - * breakpoint.c (bpstat_stop_status): Declare a bp match if the - current fp matches the bp->fp OR if the current fp is less than - the bp->fp if we're looking at a bp_step_resume breakpoint. - -Tue Sep 8 19:42:58 1998 Stan Shebs <shebs@andros.cygnus.com> - - * symtab.h (struct symtab): Remove EXTRA_SYMTAB_INFO hook, - not currently used. - * symfile.c (allocate_symtab): Deprecate use of - INIT_EXTRA_SYMTAB_INFO here. - -Fri Sep 4 15:33:25 1998 Stan Shebs <shebs@andros.cygnus.com> - - * README: Update remote debugging and testsuite info. - -Thu Sep 3 13:50:20 1998 Mark Alexander <marka@cygnus.com> - - * config/mn10300/tm-mn10300.h (FP_REGNUM): Redefine to be a - pseudo-register, not the same as a3. - (D2_REGNUM, D3_REGNUM, A2_REGNUM, A3_REGNUM): Define. - * mn10300-tdep.c (fix_frame_pointer): New function. - (set_movm_offsets): Use register number macros instead of - hard-coded constants. - (mn10300_analyze_prologue): Fix to handle redefinition of FP_REGNUM. - (mn10300_frame_chain): Fix to handle redefinition of FP_REGNUM; - use register number macros instead of hard-coded constants; - add missing parameter to call of mn10300_analyze_prologue. - (mn10300_frame_saved_pc): Use register number macros instead of - hard-coded constants. - -Tue Sep 1 12:04:57 EDT 1998 Zdenek Radouch (radouch@cygnus.com) - - Changes to support/fix ARM/ELF port. Use MAKE_MSYMBOL_SPECIAL for - both ELF and COFF; - * elfread.c (elf_symtab_read): use ELF specific macro - * coffread.c (coff_symtab_read): use COFF_MAKE_MSYMBOL_SPECIAL() - * arm-tdep.c: separate COFF and ELF thumb processing - disable --mapcs-float processing - * dwarf2read.c: Disabled building of minimal symbols - * config/arm/tm-arm.h: new macros for distinguishing arm/thumb - * config/mips/tm-mips.h: use ELF specific macro - -Mon Aug 31 15:42:10 1998 Tom Tromey <tromey@cygnus.com> - - * top.c (context_hook): Define. - -Tue Aug 25 13:21:58 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * ax-gdb.c (gen_var_ref): Allow for typedef types. - (gen_cast, gen_bitfield_ref, gen_expr, gen_deref): ditto. - -Mon Aug 24 18:29:03 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * tracepoint.c (collect_symbol): Handle register doubles that - are stored in two registers. - -Mon Aug 24 14:39:08 1998 Mark Alexander <marka@cygnus.com> - - * sh-stub.c (undoSStep): Improve comment. - * sparc-tdep.c (sparc_extract_struct_value_address): Simplify to use - same method on both 32-bit and 64-bit machines. - * sparcl-tdep.c (sparclite_check_watch_resources): Simulator doesn't - support hardware breakpoints. - * config/sparc/tm-sparc.h (CALL_DUMMY): Improve comments. - -1998-08-20 Jason Molenda (jsm@bugshack.cygnus.com) - - * rdi-share/Makefile.am (INCLUDES): Fix typeo. - * rdi-share/Makefile.in: Regenerated. - -1998-08-19 Jason Molenda (jsm@bugshack.cygnus.com) - - * rdi-share/Makefile.am: Use just `INCLUDES' not `libname_INCLUDES'. - * rdi-share/Makefile.in: Regenerated. - -1998-08-19 Keith Seitz <keiths@cygnus.com> - - * v850ice.c (v850ice_stop): New function to stop the ICE. - (v850ice_load) Pass filename to ICE DLL. - (ice_stepi, ice_nexti, ice_cont): Do not directly call the gdb - commands -- let the GUI do it so that it can retain control - of the display. - -Wed Aug 19 15:53:52 1998 Anthony Green <green@hoser.cygnus.com> - - * i386v4-nat.c: Include sys/reg.h if present. - -Wed Aug 19 03:07:53 1998 Richard Henderson <rth@cygnus.com> - - * config/alpha/alpha-linux (XDEPFILES): Build ser-tcp. - -1998-08-18 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * symtab.c (decode_line_1): For minimal symbol, SKIP_PROLOG to - make sure we stop after the frame pointer is locaded and backtrace - prints an accurate stack. Complements changes made on Mon Jul 27 - 10:45:56 1998 - (decode_line_2): Replaced the whitespace after ">" in a prompt - which has been taken away by changes made on Sun Jul 19 02:11:45 - 1998 - -1998-08-18 Keith Seitz <keiths@cygnus.com> - - * stack.c: Define new hook, selected_frame_level_changed_hook, which - will be called whenever the selected stack level changes. - (select_frame): Call the selected_frame_level_changed_hook. - -Tue Aug 18 18:03:42 1998 Stan Shebs <shebs@andros.cygnus.com> - - * remote-rdi.c (arm_rdi_open): Pass serial device name to - Adp_OpenDevice, and include it in error reports. - -1998-08-18 Jason Molenda (jsm@bugshack.cygnus.com) - - * configure.in: Add more header files to AC_CHECK_HEADERS. - * configure: Regenerated. - - * command.c: Include wait.h or sys/wait.h if present. - * inftarg.c: Ditto. - * core-aout.c: Include ptrace.h or sys/ptrace.h if present, based - on autoconf test. - * infptrace.c: Ditto. - - * expprint.c: Include ctype.h for isprint prototype. - * i386aix-nat.c: Include sys/reg.h if autoconf says it is present. - * i386v-nat.c: Include ptrace.h, sys/ptrace.h, and sys/reg.h if - present, based on autoconf test. - - * utils.c: Include curses.h and term.h if present. - (puts_debug): Change 'carriage_return' local variable to return_p - to avoid name clash. - - * config/m68k/nm-apollo68b.h: Don't define PTRACE_IN_WRONG_PLACE, - determine it with autoconf. - * config/i386/nm-linux.h: Don't define NO_SYS_REG_H, determine it - with autoconf. - * config/i386/nm-i386sco.h: Don't define NO_PTRACE_H, determine it - with autoconf. - * config/i386/nm-i386v.h: Ditto. - * config/i386/nm-symmetry.h: Ditto. - * config/m88k/xm-cxux.h: Ditto. - * config/m88k/xm-dgux.h: Ditto. - - * config/m68k/delta68.mh (NAT_FILE): nm-delta68.h no longer necessary. - * config/m68k/nm-delta68.h: Removed. - -Fri Aug 14 11:14:03 1998 Jeffrey A Law (law@cygnus.com) - - * mn10300-tdep.c (set_movm_offsets): Change second argument to - be the actual args to movm itself. All callers changed. Only set - fi->fsr.regs[x] if reg X is saved by the movm instruction. - -Fri Aug 14 04:18:23 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> - - * sol-thread.c (lwp_to_thread): Fix error message for failing - td_ta_map_lwp2thr call. - (ps_lgetLDT): Mask off upper bits in GS register when comparing - with selector. - -Wed Aug 12 16:30:01 1998 Frank Ch. Eigler <fche@cygnus.com> - - * remote-sim.c (simulator_command): Reset register cache after - simulator command. - -Wed Aug 12 09:00:26 1998 Stu Grossman <grossman@babylon-5.cygnus.com> - - * expprint.c (dump_prefix/postfix_expression): Don't try to print - type expressions. - -Tue Aug 11 11:33:25 1998 Stu Grossman <grossman@babylon-5.cygnus.com> - - * c-typeprint.c (c_print_type): Don't crash if varstring is null. - * expprint.c expression.h (dump_expression): Rename to - dump_prefix_expression. - * Print out the expression in normal form. Call print_longest - instead of trying to do it ourselves. - * (dump_postfix_expression): New function, prints out the expression - with indentation and better formatting and interpretation. - * parse.c (parse_exp_1): Put calls to dump expressions under ifdef - MAINTENANCE_CMDS and expressiondebug variable. - -Thu Aug 6 13:20:02 1998 Ron Unrau <runrau@cygnus.com> - - * infrun.c (wait_for_inferior): use stop_func_name instead of - stop_func_start to decide that no debug info exists. - -start-sanitize-sky -Thu Aug 6 13:15:05 1998 Ron Unrau <runrau@cygnus.com> - - * txvu-tdep.c: add VU0/1 control registers - * config/mips/tm-txvu.h: ditto - -Tue Aug 4 11:02:50 1998 Ron Unrau <runrau@cygnus.com> - - * txvu-tdep.c (txvu_insert_breakpoint): make sure CPU context is - set to correct VU memory space. - (txvu_remove_breakpoint): use this instead of txvu_breakpoint_from_pc - * config/tm-txvu.h: use new track-table address - Do note define BREAKPOINT_FROM_PC anymore - -Fri Jul 31 16:06:05 1998 Ron Unrau <runrau@cygnus.com> - - * config/tm-txvu.h: use NUM_CORE_REGS instead of NUM_R5900_REGS - * mips-tdep.c: use NUM_CORE_REGS - * txvu-tdep.c: use NUM_CORE_REGS, add function prototypes - (txvu_insert_breakpoints): use VIF interrupt bit - -end-sanitize-sky -Thu Jul 30 13:53:50 1998 Mark Alexander <marka@cygnus.com> - - * mips-tdep.c (mask_address_p): New variable. - (mips_addr_bits_remove): Test mask_address_p to decide whether - to mask off the upper 32 bits of addresses. - (_initialize_mips_tdep): Add command to set mask_address_p. - (mips_call_dummy_address): New function. - * config/mips/tm-mips.h (CALL_DUMMY_ADDRESS): Redefine to - call mips_call_dummy_address. - -1998-07-29 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * symfile.c (add_symbol_file_command): Test for the from_tty - parameter and avoid query when not interactive. - -start-sanitize-cygnus -Wed Jul 29 10:39:29 1998 Jeffrey A Law (law@cygnus.com) - - * mn10300-tdep.c (set_movm_offsets): Do nothing for the am33 - registers if we are not in am33 mode. - (mn10300_frame_chain, mn10300_frame_saved_pc): Similarly. - (set_machine_hook): Keep track of whether or not we're in am33 mode. - -end-sanitize-cygnus -Mon Jul 27 16:11:42 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * tracepoint.c (remote_set_transparent_ranges): new function. - Send the start and end addresses of all loadable read-only - sections down to the trace target, so that it can treat them - as "transparent" (ie. don't care if they were collected or not). - -Mon Jul 27 15:38:07 1998 Mark Alexander <marka@cygnus.com> - - * mn10300-tdep.c (mn10300_analyze_prologue): Undo previous fix - for setting frame address in optimized code; made unnecessary - by compiler fixes. - -Mon Jul 27 10:45:56 1998 Martin M. Hunt <hunt@cygnus.com> - - * symtab.c (decode_line_1): For minimal symbol, call - find_pc_sect_line() to make sure the line number gets set - properly. - (print_symbol_info): Redeclare function void. - -1998-07-27 Jason Molenda (jsm@bugshack.cygnus.com) - - * config/d10v/tm-d10v.h (REGISTER_NAMES): sp -> r15. The - stack pointer et al are synthesized from the SP_REGNUM (etc) - defines and should not be mentioned in REGISTER_NAMES. - -start-sanitize-cygnus -Mon Jul 27 08:54:41 1998 Jeffrey A Law (law@cygnus.com) - - * mn10300-tdep.c (mn10300_frame_chain): Account for space saved - by am33 register saves. - (mn10300_frame_saved_pc): Similarly. - -end-sanitize-cygnus -Fri Jul 24 14:41:19 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * tracepoint.c (encode_actions): Treat register names and simple - variable names as special cases and don't convert them to byte- - codes: these things can be collected far more efficiently - without invoking the bytecode interpreter. - -Fri Jul 24 13:32:46 1998 Mark Alexander <marka@cygnus.com> - - * config/i386/tm-i386.h (STORE_STRUCT_RETURN): Make it - work on hosts of any endianness. - * config/i386/tm-i386v.h: Ditto. - -Fri Jul 24 07:41:12 1998 Mark Alexander <marka@cygnus.com> - - * mn10300-tdep.c (set_movm_offsets): New helper function - for mn10300_analyze_prologue. - (mn10300_analyze_prologue): Simplify by factoring out common code. - Fix bugs in setting frame address for optimized code. - Use read_memory_nobpt instead of target_read_memory. - -Thu Jul 23 17:01:17 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * tracepoint.c (collect_symbol): handle LOC_ARG case. - -Thu Jul 23 15:07:40 1998 Dawn Perchik <dawn@cygnus.com> - - * sparc-tdep.c (sparc_init_extra_frame_info): Recognize when we're - in a function prologue before the SAVE instruction. - (sparc_frame_saved_pc): Ditto. - * config/sparc/tm-sparc.h (EXTRA_FRAME_INFO): Add in_prologue flag. - -Thu Jul 23 14:58:09 1998 Dawn Perchik <dawn@cygnus.com> - - * i386-tdep.c (i386_get_frame_setup): Recognize function - prologues in code compiled with -fcheck-stack. - -Thu Jul 23 14:49:27 1998 Dawn Perchik <dawn@cygnus.com> - - * remote-mips.c (remote_mips_insert_hw_breakpoint, - remote_mips_remove_hw_breakpoint): New functions for hardware - breakpoints on LSI targets. - * config/mips/tm-embed.h (target_remove_hw_breakpoint, - target_insert_hw_breakpoint): Define to call - remote_mips_insert_hw_breakpoint and remote_mips_remove_hw_breakpoint, - respectively. - -start-sanitize-sky -Thu Jul 23 13:00:28 1998 Ian Carmichael <iancarm@cygnus.com> - - * txvu-tdep.c (VU0_MEM0_WINDOW_START, VU1_MEM0_WINDOW_START) - Changed to use addresses in kseg1 range. - -end-sanitize-sky -1998-07-21 Fernando Nasser <fnasser@totem.to.cygnus.com> - - * source.c (print_source_lines): Print "No such file or directory" - just once. - (directory_command): same as above; resets if user issues dir. - -Sun Jul 19 02:11:45 1998 Martin M. Hunt <hunt@cygnus.com> - - * symtab.c (decode_line_2): Instead of printing a prompt - and calling command_line_input() without a prompt, just - call it with the proper args. This makes the GUI work too. - -Fri Jul 17 9:26:50 1998 Ron Unrau <runrau@cygnus.com> - - * blockframe.c (find_pc_sect_partial_function): allow for the possi- - bility of multiple symbols at the same address when finding high. - * breakpoint.c (resolve_sal_pc): if the function based section lookup - fails, try getting the section from the minimal symbol table. - * parse.c (write_exp_msymbol): use symbol_overlayed_address to get - the LMA of a minimal symbol if unmapped. - * symtab.c (find_line_symtab): change interface to return symtab - containing the best linetable found. - (decode_line_1): use find_line_symtab to set val.symtab. This should - improve support for source files with multiple symtabs. -start-sanitize-sky - * tm-txvu.h: include tm-mips64.h instead of starting from scratch. -end-sanitize-sky - -Wed Jul 15 11:51:33 1998 Keith Seitz <keiths@cygnus.com> - - * main.c (main): Fix violations of GNU coding standard. - - * breakpoint.c: Export delete_command. - - * infcmd.c: Export continue_command, stepi_command, and nexti_command. - - * Makefile.in: Add target for v850ice.o. - - * configure.tgt: Add cygwin32 dependencies for v850 ice. - -Wed Jul 15 10:58:29 1998 Nick Clifton <nickc@cygnus.com> - - * tracepoint.c (set_raw_tracepoint): Cope with symbols that do not - have an associated directory. - -Mon Jul 13 15:21:04 1998 Mark Alexander <marka@cygnus.com> - - * utils.c (puts_debug): Display non-printable characters in hex - instead of octal. - -Thu Jul 9 16:16:47 1998 Jeffrey A Law (law@cygnus.com) - - * mn10300-tdep.c (mn10300_generic_register_names): New variable. - (set_machine_hook): New function. Copy the appropriate register - names into reg_names. - (_initialize_mn10300_tdep): Set up to call set_machine_hook. - * tm-mn10300 (NUM_REGS): Bump to 32. - (REGISTER_NAMES): Updated accordingly. - -start-sanitize-cygnus - * mn10300-tdep.c (am33_register_names): New variable. - (mn10300_analyze_prologue): Handle regs saved by am33 prologues. - * tm-mn10300.h (E0_REGNUM): Define. -end-sanitize-cygnus - -Tue Jul 7 7:40:13 1998 Ron Unrau <runrau@cygnus.com> - - * symtab.c (find_pc_sect_psymbol): allow case where textlow is 0 - -Thu Jul 2 15:57:58 1998 Frank Ch. Eigler <fche@cygnus.com> - - * breakpoint.c (resolve_sal_pc): Accept absence of innermost - Lexical block for breakpoint resolution. - -Thu Jul 2 10:22:00 1998 Dawn Perchik <dawn@cygnus.com> - - * mdebugread.c (parse_partial_symbols): Go ahead and read the .mdebug - section, but just don't add a 2nd minimal symbol if this is an .mdebug - section in an ELF file. - -1998-07-01 Jim Blandy <jimb@zwingli.cygnus.com> - - * Makefile.in (ax-general.o): Depend on $(defs_h) too. - (ax_h): Bother to define this. - -Mon Jun 29 19:01:18 1998 Jim Wilson <wilson@cygnus.com> - - * gnu-regex.c (re_comp): Add cast to char * before gettext calls. - -Sun Jun 28 11:35:48 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> - - Improve support for SunPro F77. - * dbxread.c (end_psymtab, process_one_symbol): Handle minimal - symbols with trailing underscore names. - * minsyms.c (find_stab_function_addr): Ditto. - * dbxread.c (process_one_symbol): Ignore N_ALIAS for now. - * partial-stab.h (case N_ALIAS): Ditto. - * stabsread.c (read_sun_builtin_type): Handle boolean types. - -Fri Jun 26 14:03:01 1998 Keith Seitz <keiths@cygnus.com> - - * symtab.h (enum namespace): Add new namespaces FUNCTIONS_NAMESPACE, - TYPES_NAMESPACE, METHODS_NAMESPACE, and VARIABLES_NAMESPACE used by - new search_symbols. - Add prototype for search_symbols and free_search_symbols. - - * symtab.c (list_symbols): Rewrite to use new search_symbols. - (file_matches): New helper function for search_symbols. - (free_search_symbols): New function which frees data returned from - search_symbols. - (print_symbol_info): New helper function which prints info about a - matched symbol to stdout. Extracted from old list_symbols. - (print_msymbol_info): New helper function which prints info about - a matched msymbol to stdout. Extracted from old list_symbols. - (symtab_symbol_info): Extracted from old list_symbols. - (variables_info): Use symtab_symbol_info. - (functions_info): Use symtab_symbol_info. - (types_info): Use symtab_symbol_info. - (rbreak_command): Rewrite to use new search_symbols. - -Thu Jun 25 22:38:32 1998 Frank Ch. Eigler <fche@cygnus.com> - - * mips-tdep.c (mips_push_arguments): Use 128-bit stack frame - alignment for inferior calls. - -Wed Jun 24 23:17:12 1998 Mark Alexander <marka@cygnus.com> - - * mn10200-tdep.c (mn10200_analyze_prologue): Fix calculation - of jsr target address. - -Tue Jun 23 19:37:46 1998 Mark Alexander <marka@cygnus.com> - - * config/mn10200/tm-mn10200.h (SAVED_PC_AFTER_CALL): Don't - zero upper byte of address. - -Tue Jun 23 17:32:26 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * rs6000-tdep.c (pop_dummy_frame): use memcpy. - (push_arguments): use memset. - (various other places): fix up indentation and long lines. - -Tue Jun 23 11:58:35 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * configure.in: s/lXext/-lXext/ for Jillian's change. - -Tue Jun 23 11:14:04 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * source.c (find_source_lines): fix indentation. - - * config/mips/tm-irix5.h: Modify to work better on irix 6, by - making FP registers 8 bytes instead of 4. - REGISTER_BYTES: redefine. REGISTER_BYTE(): redefine. - REGISTER_VIRTUAL_TYPE: redefine. MIPS_LAST_ARG_REGNUM: redefine. - * irix5-nat.c (fetch_core_registers): read 8 bytes per FP register. - * mips-tdep.c (FP_REGISTER_DOUBLE): new macro to distinguish - targets with 8-byte FP registers (don't use TARGET_MIPS64). - (STACK_ARGSIZE): new macro, how much space is taken up on the - stack for each function argument (don't use TARGET_MIPS64). - (mips_push_arguments): modify logic to work better on Irix 6 - (n32 ABI). - -Tue Jun 23 12:29:53 1998 Jillian Ye <jillian@cygnus.com> - - * configure.in: Add -lXext to mips_extra_libs - * configure: Regenerated. - -Sun Jun 21 09:31:12 1998 Ron Unrau (runrau@cygnus.com) - - * symtab.c (find_line_pc): assumed that a PC of 0 is illegal. - Changed to pass PC as arg and return 1 if valid (0 otherwise). - * symtab.h: Change prototype to match. - * symtab.c (find_line_pc_range): Use new interface. - * breakpoint.c (resolve_sal_pc): Ditto. - -Wed Jun 17 15:50:00 1998 Ron Unrau (runrau@cygnus.com) - - * parse.c (target_map_name_to_register): Check target specific - aliases *first* so that it can over-ride architectural names - -Wed Jun 17 17:13:38 1998 Said Ziouani (saidz@park-street.cygnus.com) - - * remote-sds.c (sds_start_remote): Fix printf call. - -Tue Jun 16 16:32:08 1998 Mark Alexander <marka@cygnus.com> - - * mn10200-tdep.c (mn10200_analyze_prologue): Fix null pointer - crash when in "start". - -Tue Jun 16 14:38:40 1998 Ron Unrau (runrau@cygnus.com) - - * dbxread.c: reset function_start_offset after a finishing N_FUN - is seen. - * remote-sim.c: allow TARGET_REDEFINE_DEFAULT_OPS to override - target vectors as needed. - -Sun Jun 14 08:46:25 1998 Ron Unrau (runrau@cygnus.com) - - * partial-stab.h: 'F' and 'f' type N_FUN psymbols should pass - CUR_SYMBOL_VALUE as CORE_ADDR instead of long - * buildsym.[ch]: export pending_blocks list - -Sat Jun 13 13:02:32 1998 Dawn Perchik (dawn@cygnus.com) - - * remote.c: Fix remote help string to match that of help.exp. - -Fri Jun 12 14:22:55 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * configure.in (LIBS): Add -lw to the list of libraries if needed. - -Thu Jun 11 15:05:10 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * btowc.c: Removed. - * configure.in: Don't see if we need to replace btowc(). - * Makefile.in: Don't include LIBOBJS. - * configure: Regenerated. - * gnu-regex.c (regex_compile): Only support i18n [:foo:] if - we have btowc(). - -Wed Jun 10 15:39:14 1998 Stu Grossman <grossman@babylon-5.cygnus.com> - - * c-exp.y: Fix problems with parsing "'foo.bar'::func". - Some languages allow symbols with dots. - - * gdbtypes.c (check_stub_method): Cosmetic. Use more descriptive - names for parameters. - - * jv-exp.y: Parser now accepts primitive types. - * (parse_number): Use correct ifdef for scanf long double support. - * jv-lang.c (java_array_type): Initial cut at array support. - - * language.c language.h (set_language): Now returns previous language. - - * symtab.c (find_methods): Make static. Cosmetic changes, including - indentation, and adding descriptive comments. Move local variable - defs into the block they are used in. - * Don't call check_stub_method any more. Use gdb_mangle_name to - generate the full method name. find_method doesn't need all the other - goobldegook that check_stub_method does. - * (gdb_mangle_name): Use more descriptive names for parameters. Fix - comment. - * (lookup_partial_symbol lookup_block_symbol): Check for java to - ensure we can find mangled names. - * (decode_line_1): Move local variable defs into the block they are - used in. (Improves code readability.) - -Wed Jun 10 18:04:35 1998 Frank Ch. Eigler <fche@cygnus.com> - - * gdbtypes.c (get_discrete_bounds): Assign unsigned type flag for - all-positive enum. - (create_set_type): Ditto for all-positive set values. - * values.c (unpack_field_as_long): Check for typedef in struct - field unpacking. - -Wed Jun 10 14:06:05 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * configure.in: Add some tests for gnu-regex.c's benefit. - See if btowc() function is provided in C library. - * configure, config.in: Regenerated. - * Makefile.in (CLIBS, CDEPS): Add @LIBOBJS@ to build btowc.c - if necessary. - * btowc.c: New file. - - * gnu-regex.c: Reorder wchar.h and wctype.h includes for Solaris' - benefit. - Drop namespace preserving defines for now. - -Wed Jun 10 11:53:42 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * gnu-regex.c: Include "gnu-regex.h", not "regex.h". - -Wed Jun 10 11:34:07 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * gnu-regex.c, gnu-regex.h: Change LGPL license to GPL license - to stay consistent with the rest of GDB. - -Wed Jun 10 11:27:39 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * gnu-regex.c, gnu-regex.h: Update to current FSF (glibc) versions. - -Wed Jun 10 10:58:18 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * printcmd.c (disassemble_command): move overlay mapping code - "up" into find_pc_partial_function. - * blockframe.c (find_pc_partial_function): adjust start address - and end address for overlays (mapped vs. unmapped addresses), - so that all callers of this function may benefit. - * m32r-tdep.c (m32r_skip_prologue): adjust indentation. - -Mon Jun 8 16:08:10 1998 Ron Unrau <runrau@cygnus.com> - - * objfiles.c (add_to_objfile_sections): All targets to define - TARGET_KEEP_SECTION to permit them to retain bfd sections that - GDB would otherwise have discarded. - -Fri Jun 5 13:56:19 1998 Doug Evans <devans@canuck.cygnus.com> - - * dbxread.c (read_dbx_symtab): Don't lower texthigh for last psymtab. - -Thu Jun 4 18:35:04 1998 Stan Shebs <shebs@andros.cygnus.com> - - * remote.c (init_extended_remote_ops): Make extended_remote_ops - by copying from remote_ops, move it and init_remote_ops to - usual place at end of file, remove "void" from arg lists. - -Thu Jun 4 17:51:06 1998 Mark Alexander <marka@cygnus.com> - - * sparc-tdep.c (sparc_fix_call_dummy): Byte-swap the call dummy - on bi-endian machines. - (sparc_extract_return_value): Handle values smaller than int on - machines with little-endian data. - (sparc_target_architecture_hook): Set bi_endian flag. - -Thu Jun 4 12:14:48 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * printcmd.c (disassemble_command): Fix off-by-one error for - disassembling functions in unmapped overlay sections. - -Thu Jun 4 10:15:03 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * remote.c: merged. - - - Jim Blandy <jimb@zwingli.cygnus.com> - (print_packet, remote_packet_command): New functions. - (_initialize_remote): Register the remote-packet command. - - David Taylor <taylor@texas.cygnus.com> - (_initialize_remote): remote-compare is now - compare-sections. - - Elena Zannoni <ezannoni@kwikemart.cygnus.com> - (remote_compare_command): added warning, issued in case - of mismatch only. - -Thu Jun 4 08:25:38 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * remote.c (remote_compare_command): New function, new command. - Compare object file binary image with corresponding memory on - remote target. Report differences. - -Tue Jun 2 19:05:04 1998 Mark Alexander <marka@cygnus.com> - - * sparc-tdep.c (sparc_target_architecture_hook): Set target - byte order only when it's selectable. - -Tue Jun 2 02:01:56 1998 Mark Alexander <marka@cygnus.com> - - * sparc-tdep.c (sparc_target_architecture_hook): New function to - set endianness based on machine type. - (_initialize_sparc_tdep): Initialize target_architecture_hook. - (sparc_print_register_hook): Print PSR and FPSR in fancy format - on 32-bit machines. - * config/sparc/tm-sparc.h (PRINT_REGISTER_HOOK): Redefine to - call sparc_print_register_hook instead of using inline code. - * config/sparc/tm-sp64.h (PRINT_REGISTER_HOOK): Remove. - -Thu May 28 17:19:14 1998 Keith Seitz <keiths@cygnus.com> - - * main.c (main): Check for NULL from getenv on CYGWIN32. - -Thu May 28 09:41:44 1998 Nick Clifton <nickc@cygnus.com> - - * monitor.c (monitor_vsprintf): Handle %%. Patch courtesy of - Felix Lee (flee@cygnus.com) - -Thu May 28 00:27:35 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> - - * mips-tdep.c (mips_push_dummy_frame): Fix calculation of - PROC_REG_OFFSET and PROC_FREG_OFFSET. - -Mon Apr 27 14:37:49 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * config/v850/tm-v850.h (REGISTER_BYTE): FP_REGNUM and - FP_RAW_REGNUM use the same register location. - - * v850-tdep.c (v850_scan_prologue): Use FP_RAW_REGNUM instead of - FP_REGNUM. - (v850_frame_chain): Ditto. - - * config/v850/tm-v850.h (REGISTER_NAMES): Add "fp". - (NUM_REGS): Update. - (FP_REGNUM): Update. - (FP_RAW_REGNUM): Define. - -Wed May 27 14:22:31 1998 Keith Seitz <keiths@cygnus.com> - - * main.c (main): Convert the path returned from getenv to a posix - path on cygwin32 hosts. - -Mon May 25 13:31:27 1998 Keith Seitz <keiths@cygnus.com> - - * remote.c (remote_open_1): If an error occurs starting the remote, - pop the target AND return. - -Sat May 23 02:23:09 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> - - * dwarf2read.c (read_subroutine_type): Set TYPE_FLAG_PROTOTYPED - on C++ functions. - * valops.c (value_arg_coerce): Add new argument to indicate whether - the function has a prototype, handle integer and float promotions - accordingly. - (call_function_by_hand): Always call value_arg_coerce, pass down - prototype information. - -Fri May 22 10:56:36 1998 John Metzler <jmetzler@cygnus.com> - - * remote.c (_initialize_remote): Typo extended__remote - -Thu May 21 13:14:25 1998 John Metzler <jmetzler@cygnus.com> - - * gnu-nat.c (init_gnu_ops): Initialization of target ops by assignment. - (_initialize_gnu_nat): Call new init - * mac-nat.c (init_child_ops): Ditto. - (_initialize_mac_nat): Ditto. - * monitor.c (init_base_monitor_ops): Ditto. - (_initialize_remote_monitors): Ditto. - * ppc-bdm.c (init_bdm_ppc_ops): Ditto. - (_initialize_bdm_ppc): Ditto. - * remote-adapt.c (init_adapt_ops): Ditto. - (_initialize_remote_adapt): Ditto. - * remote-array.c (init_array_ops): Ditto. - (_initialize_array): Ditto. - * remote-bug (init_bug_ops): Ditto. - (_initialize_remote_bug): Ditto. - * remote-e7000.c (init_e7000_ops): Ditto. - (_initialize_remote_e7000): Ditto. - * remote-eb.c (init_eb_ops): Ditto. - (_initialize_remote_eb): Ditto. - * remote-es.c (init_es1800_ops): Ditto. - (init_es1800_child_ops): Ditto. - (_initialize_es1800): Ditto. - * remote-hms.c (init_hms_ops): Ditto. - (_initialize_remote_hms): Ditto. - * remote-mm.c (init_mm_ops): Ditto. - (_initialize_remote_mm): Ditto. - * remote-nindy.c (init_nindy_ops): Ditto. - (_initialize_nindy): Ditto. - * remote_nrom.c (init_nrom_ops): Ditto. - (_initialize_remote_nrom): Ditto. - * remote-os9k (init_rombug_ops): Ditto. - (_initialize_remote_os9k): Ditto. - * remote-rdi.c (init_rdi_ops): Ditto. - (_initialize_remote_rdi): Ditto. - * remote-rdp.c (init_remote_rdp_ops): Ditto. - (_initialize_remote_rdp): Ditto. - * remote-sds.c (init_sds_ops): Ditto. - (_initialize_remote_sds): Ditto. - * remote-sim.c (init_gdbsim_ops): Ditto. - (_initialize_remote_sim): Ditto. - * remote-st.c (init_st2000_ops): Ditto. - (_initialize_remote_st2000): Ditto. - * remote-udi.c (init_udi_ops): Ditto. - (_initialize_remote_udi): Ditto. - * remote-vx.c (init_vx_ops): Ditto. - (init_vx_run_ops): Ditto. - (_initialize_vx): Ditto. - * remote.c (init_remote_ops): Ditto. - (init_extended_remote_ops): Ditto. - (_initialize_remote): Ditto. - * sparcl-tdep.c (init_sparclite_ops): Ditto. - (_initialize_sparcl_tdep): Ditto. - * v850ice.c (init_850ice_ops): Ditto. - (_initialize_v850ice): Ditto. - * win32-nat.c (init_child_ops): Ditto. - (_initialize_inftarg): Ditto. - -1998-05-21 Jim Blandy <jimb@zwingli.cygnus.com> - - * ax-gdb.c (const_var_ref): Don't handle function names. I don't - want to implement all the "usual unary conversion" rules for - constants. - (gen_usual_unary): Turn "function" values into "pointer to - function" values, in accordance with ANSI. - (gen_deref): Don't do the usual unary conversions here. Let the - caller do it. Note that dereferencing a function pointer yields - a function designator, which we call an rvalue, not an lvalue. - (gen_address_of): Handle functions specially. - (gen_struct_ref): Perform the usual unary conversions before - calling gen_deref. - (gen_expr): In case for the prefix '*' operator, call - gen_usual_unary manually. - -Wed May 20 15:29:41 1998 Gavin Koch <gavin@cygnus.com> - - * mips/tm-tx39.h (MIPS_DEFAULT_FPU_TYPE): Defined as MIPS_FPU_NONE. - * mips/tm-tx39l.h: Same. - -Wed May 20 10:12:11 1998 John Metzler <jmetzler@cygnus.com> - - * m32r-tdep.c (decode_prologue): Handle frames compiled with -Os. - Split out as separate function called by skip prologue and scan - prologue. new formula handles optimization in which the prologue - is interleaved with the body of the function. Also recognizes new - variations of prologue encoding. Use of frame pointer is - essential to debugging, -fno-omit-frame-pointer - (m32r_skip_prologue): Call decode prologue, ignore line info - (m32r_scan_prologue): Call decode prologue, ignore line info. - -Tue May 19 17:23:54 1998 John Metzler <jmetzler@cygnus.com> - - * w89k-rom.c (_initialize_w89k): Call new init function - (init_w89k_cmds): Convert to dynamic initialization of monitor_ops - data structure for forward compatability with additions to the - data structure. - * dbug-rom.c (_initialize_dbug_rom): ditto - (init_dbug_cmds): ditto - * m32r-rom.c (_initialize_m32r_rom): ditto - (init_m32r_cmds): ditto - -Tue May 19 14:54:11 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * tracepoint.c (memrange_cmp): use const void * args to avoid - ANSI compiler warnings. - -1998-05-19 Jim Blandy <jimb@zwingli.cygnus.com> - - * ax-gdb.c (gen_fetch, gen_var_ref, gen_deref, find_field, - gen_bitfield_ref, gen_expr): Call error, not abort. - * ax-general.c (read_const, generic_ext, ax_trace_quick, - ax_label, ax_const_d, ax_reg, ax_print): Same. - - * tracepoint.c: Remove the $(...) syntax for memranges. - (validate_actionline, encode_actions, trace_dump_command): Remove - clauses for the $(...) syntax. - (parse_and_eval_memrange): Function deleted. - (_initialize_tracepoint): Update function description. - - * ax-gdb.c (_initialize_ax_gdb): Make the "agent" command a - subcommand of "maintenance", as it should have been from the - beginning. #include "gdbcmd.h", to get the declaration for - maintenancelist. - * Makefile.in: Document that dependency. - -Tue May 19 12:00:58 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * tracepoint.c (get_tracepoint_by_number): new function, to access - traceframe_number for use of the GUI. - - * tracepoint.h: added prototype for get_traceframe_number. - -Mon May 18 13:34:27 1998 Keith Seitz <keiths@cygnus.com> - - * dbxread.c (process_one_symbol): If block addresses are relative to - function start addresses, reset function_start_address whenever a new - source file is seen. - -Mon May 18 13:04:27 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * tracepoint.c (get_tracepoint_by_number): make sure to advance - arg pointer even if we fail to parse a useful number. Otherwise, - since this function is called in a loop, it may loop forever! - Also change strtol call to allow arbitrary radix. - (map_args_over_tracepoints (and other places)): add QUIT; call - to loop, to allow breakout using control-C. Not all loops were - analyzed to make sure they could terminate cleanly, but even - terminating with a messed-up tracepoint list would be better - than not terminating at all! - (tdump_command): check to see if we're connected to a trace- - capable target (currently only "remote") before doing anything - else. - -Sat May 16 22:21:48 1998 Frank Ch. Eigler <fche@cygnus.com> - - * config/d30v/tm-d30v.h (INIT_FRAME_PC_FIRST): Fill in PC into - frame struct before extracting saved register offsets. - -Fri May 15 22:47:45 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * tracepoint.c (encode_actions): fix typo in printf format string. - -1998-05-15 Jim Blandy <jimb@zwingli.cygnus.com> - - Implement a few more tracing operators: ^ | & ~ ! - * ax-gdb.c (gen_integral_promotions, gen_logical_not, - gen_complement): New functions. - (gen_binop): New argument MAY_CARRY, indicating whether we need to - correct the upper bits of the value after performing the - operation. Callers changed. - (gen_expr): Handle BINOP_BITWISE_AND, BINOP_BITWISE_IOR, and - BINOP_BITWISE_XOR here as well, by calling gen_binop. Handle - UNOP_LOGICAL_NOT, UNOP_COMPLEMENT. - - * ax-gdb.c (gen_conversion): Reworked to avoid some unnecessary - sign extension. - - * ax-gdb.c (gen_usual_arithmetic): Renamed from gen_usual_binary, - to match the ANSI C standard better. Callers changed. - - * ax-gdb.c (gen_traced_pop): Add prototyped declaration. - -Fri May 15 18:18:38 1998 David Taylor <taylor@texas.cygnus.com> - - * tracepoint.c (stringify_collections_list): return a collection - of strings rather than a single string. - (free_actions_list): new function. - (encode_actions): process collection of strings returned by - stringify_collections_list. - -1998-05-15 Jim Blandy <jimb@zwingli.cygnus.com> - - * ax-gdb.c (gen_traced_pop): New function. - (gen_expr): Call it for comma operator. - (gen_trace_for_expr): Call it, instead of writing it out. - - Add facilities for sending arbitrary packets to the remote agent. - There are a bunch of improvements to make (make it generic; handle - 'O' replies properly), but I just want to get this onto the branch. - * remote.c (print_packet, remote_packet_command): New functions. - (_initialize_remote): Register the remote-packet command. - -Thu May 14 17:52:31 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * tracepoint.c: move actionline_type definition to tracepoint.h. - (validate_actionline): make non static. - - * tracepoint.h: move actioline_type definition from tracepoint.c. - (validate_actionline) moved prototype from tracepoint.c. - -Thu May 14 11:49:18 1998 David Taylor <taylor@texas.cygnus.com> - - * tracepoint.c (validate_actionline): add additional error - checking, remove some dead code. - (encode_actions): additional cleanups. - (trace_find_command): remove some dead code. - (trace_find_pc_command): ditto. - (trace_find_tracepoint_command): ditto. - (trace_find_line_command): ditto. - (trace_find_range_command): ditto. - (trace_find_outside_command): ditto. - -Thu May 14 5:51:00 1998 Ron Unrau <runrau@cygnus.com> - - * symtab.c (decode_line_1): set section for "break *<addr>" - -Wed May 13 20:58:02 1998 Mark Alexander <marka@cygnus.com> - - * corefile.c (reopen_exec_file): Reopen the exec file if - it has changed. - -Wed May 13 15:22:02 1998 Mark Alexander <marka@cygnus.com> - - * sparc-tdep.c (fetch_instruction): New function. - (single_step, sparc_init_extra_frame_info, examine_prologue): - Use fetch_instruction instead of read_memory_integer - to ensure that instructions are always read as big-endian. - -Wed May 13 14:42:21 1998 Ian Lance Taylor <ian@cygnus.com> - - * configure.in: Add AC_FUNC_ALLOCA. - * defs.h: Check HAVE_ALLOCA_H rather than sparc. Add _AIX pragma - alloca. - * configure: Rebuild. - * Makefile.in (jv-lang.o, jv-typeprint.o, jv-valprint.o): New - targets. - -Wed May 13 11:19:08 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * tracepoint.c (trace_command): Remove old diagnostic code that was - preventing tracepoints from being defined with a full-path filename. - -Tue May 12 13:17:35 1998 Frank Ch. Eigler <fche@cygnus.com> - - * stabsread.c (read_one_struct_field): Check for typedef in type - tree before clearing bitfield information. - -1998-05-11 Jim Blandy <jimb@zwingli.cygnus.com> - - * ax-gdb.c (gen_binop): New function, based on gen_mul, to replace - gen_mul and gen_div, and handle `%' op as well. Correctly tests - type of arguments. - (gen_expr): Factor out common code in binary arithmetic operators. - Add support for `%'. - (gen_mul, gen_div): Removed. - -Thu May 7 14:49:38 1998 Bob Manson <manson@charmed.cygnus.com> - - * config/sparc/tm-sp64.h (CALL_DUMMY): Store and retrieve - %o0-%o5 as 64-bit values; compensate for stack bias. - (USE_STRUCT_CONVENTION): We only pass pointers to structs - if they're larger than 32 bytes. - (REG_STRUCT_HAS_ADDR): Ditto. - - * sparc-tdep.c (sparc_init_extra_frame_info): Use read_sp() - instead of read_register. If the target is a sparc64 and the frame - pointer is odd, compensate for the stack bias. - (get_saved_register): Use read_sp(). - (DUMMY_STACK_REG_BUF_SIZE): Use FP_REGISTER_BYTES. - (sparc_push_dummy_frame): Use read_sp()/write_sp(). On sparc64, - save the PC, NPC, CCR, FSR, FPRS, Y and ASI registers. - (sparc_frame_find_saved_regs): Use read_sp(). Read the PC, NPC, - CCR, FSR, FPRS, Y and ASI registers from the frame, if it's a - dummy frame. - (sparc_pop_frame): Use write_sp(). If the target is a sparc64 and - the FP is odd, compensate for stack bias. - (sparc_store_return_value): Right-justify the return value before - writing it to %o0. - (sparc_fix_call_dummy): Don't NOP out part of the call dummy on - sparc64. - (sparc64_read_sp, sparc64_read_fp, sparc64_write_sp, - sparc64_write_fp, sp64_push_arguments, - sparc64_extract_return_value): New functions to support the - sparc64 ABI. - - * dwarfread.c (handle_producer): Set processing_gcc_compilation to - the right version number. - - * dwarf2read.c (read_file_scope): Assume we're processing - GCC2 output. - -Wed May 6 16:34:03 1998 Jeffrey A Law (law@cygnus.com) - - * somsolib.c: Include gdb_stat.h. - -Mon May 4 18:34:01 1998 David Taylor <taylor@texas.cygnus.com> - - * ax-gdb.c (gen_mul): new function; (gen_div): new function; - (gen_expr): add support for * and / operators, call gen_mul and - gen_div as appropriate. - -Mon May 4 16:24:22 1998 Mark Alexander <marka@cygnus.com> - - * defs.h (make_run_cleanup): Declare. - * solib.c (find_solib): Pass correct number of arguments to - make_run_cleanup. - -Mon May 4 07:08:25 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * tracepoint.c (trace_actions_command): actions command must set - step_count to zero (in case previous actions have set it but the - new set does not). - -Sat May 2 09:35:07 1998 Stu Grossman <grossman@babylon-5.cygnus.com> - - * ocd.h: Add new flags, function codes, and processor types to - support new Wiggler capabilities. - * (ocd_write_bytes_size): New function to allow atomic writes of - memory in sizes larger than a byte. - - * ser-unix.c (baudtab): Add 57600, 115200, 230400, and 460800 baud. - -Fri May 1 19:51:32 1998 Frank Ch. Eigler <fche@cygnus.com> - - * stabsread.c (read_one_struct_field): Do not override supplied - bitfield size for a range type value. - - * gdbtypes.c (create_range_type): For a range with positive - lower limit, declare range type as unsigned. - -Fri May 1 10:58:34 1998 John Metzler <jmetzler@cygnus.com> - - * monitor.c: Turn off debug - -Fri May 1 09:29:56 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> - - * breakpoint.c (delete_command): Skip internal breakpoints when - all breakpoints are requested. - - * stabsread.c (define_symbol): Record parameter types from Sunpro - function stabs in the TYPE_FIELDS of the function type. - -Thu Apr 30 15:59:54 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * Makefile.in (config-check-targets, config-check-hosts): Removed. - -1998-04-30 Paul Eggert <eggert@twinsun.com> - - * Makefile.in (maintainer-clean): - Don't get ahead of yourself and delete Makefile - before running `make'. - (local-maintainer-clean, do-maintainer-clean): New rules. - -Wed Apr 29 14:02:59 1998 David Taylor <taylor@texas.cygnus.com> - - * ax-gdb.c (gen_add): when adding a pointer and an int, use - the size of the pointer, not the int (typo) to decide how - to extend the result. - -Wed Apr 29 10:20:40 1998 John Metzler <jmetzler@cygnus.com> -start-sanitize-vr4xxx - - * nec4102rom.c: New file implements ROM monitor adapter for - nec-vr4102 board. This board hosts the vr4111 chip. This file - required extensions to the monitor_ops structure, hooks for wait - filter, new flags. This version does not support more than one - breakpoint and resuming after a breakpoint in 16 bit mode is - completely disfunctional. -end-sanitize-vr4xxx - - * monitor.h: Defined additional hooks for dmpregs, configure_hooks - and wait_filter. These additions require that all ROM monitor - interfaces be recoded to initialize monitor ops using assignments - rather than static structure initialization. Added new bits to - flags MO_EXACT_DUMPADDR, MO_HAS_BLOCKWRITES. - - * monitor.c (RDEBUG): Conditional tracing throughout the file. - (fromhex): Now recognized upper cse hex digits - (monitor_printf_noecho): - (monitor_readchar): Tracing interferes with input timing. - (monitor_open): Register different memory write functions with - dcache_init if MO_HAS_BLOCKWRITES. - (flush_monior_dcache): Added as an additional utilty. - (monitor-resume): Call continue hook if one has been supplied. - (monitor_wait_filter): New function Factored out of monitor wait - and used if alternate wait-filter has not been provided. - (monitor_wait): call alternate wait filter if provided. Call - monitor_dump_regs, a new function factored out from inline code. - (monitor_dump_block): A new function used as a utility when - monitors must dump several blocks of registers using different - commands. - (monitor_dump_regs): Call alternate function if provided. Uses new - hook in monitor.h. - (monitor_write_memory): Engage previouly added hook - MO_FILL_USES_ADDR. - (monitor_write_even_block): new function supports writing long - blocks of 4byte words. - (longlongendswap): new internal function - (monitor_write_memory_longlongs): new function writes large blocks - using command to enter a long long. - (monitor_write-memory_block): new Function figures out which block - mod to use. - (monitor_read_memory): Can now handle dump formats in which the bytes - preceeding the requested data is not printed. - -Tue Apr 28 19:41:33 1998 Tom Tromey <tromey@cygnus.com> - - * tracepoint.c (memrange_cmp): Another typo fix; `memrbnge' -> - `memrange'. - - * tracepoint.c (memrange_cmp): Fixed typo in function intro. - -Tue Apr 28 17:41:20 1998 Philippe De Muyter <phdm@macqel.be> - - * symfile.c (overlay_auto_command): Add forgotten parameter - definitions. - (overlay_manual_command, overlay_off_command): Likewise. - (overlay_load_command): Likewise. - * tracepoint.c (memrange_cmp): Parameters have type void *, not - struct memrange *. - -Tue Apr 28 11:08:25 1998 John Metzler <jmetzler@cygnus.com> - - * rom68k-rom.c (_initialize_rom68k): Fix unresolved init_rom_68kcmds. - -Mon Apr 27 14:32:21 1998 Mark Alexander <marka@cygnus.com> - - * config/sparc/tm-sparc.h (CALL_DUMMY): Shorten it drastically, - make it work on the simulator. - (FIX_CALL_DUMMY): Convert to function call instead of inline code. - (sparc_fix_call_dummy): Declare. - * sparc-tdep.c (sparc_fix_call_dummy): New function, taken from - old FIX_CALL_DUMMY macro, with additional fixes for simulator. - (sparc_push_dummy_frame): Set registers differently on simulator - to prevent corrupted register window save areas. - -Mon Apr 27 13:46:40 1998 John Metzler <jmetzler@cygnus.com> - - * rom68k-rom.c (_initialize_rom68k, init_rom68k_cmds): - Convert all static initializations of monitor ops structures to - executable initializations in order that additions to the data - structure definition can me made without repeating this editing - exercise. - * abug-rom.c (_initialize_abug_rom, init_abug-cmds): Ditto. - * cpu32bug-rom.c (_initialize_cpu32bug_rom, init_cpu32bug_cmds): Ditto. - * mon960-rom.c (initialize_mon960, init_mon960_cmds): Ditto. - * op50-rom.c (initialize_op50n, init_op50n_cmds): Ditto. - * ppcbug-rom.c (_initialize_ppcbug_rom, init_ppc_cmds): Ditto. - * sh3-rom.c (_initialize_sh3_rom, init_sh3_cmds): Ditto. - * sparclet-rom.c (_initialize_sparclet, init_sparclet_cmds): Ditto. - * remote-est.c (_initialize_est, init_est_cmds): Ditto. - * remote-hms.c ( _initialize_remote_hms, init_hms_cmds): Ditto. - -Mon Apr 27 10:43:04 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * gdb_string.h (strdup): Don't specify arguments in prototype. - -Sun Apr 26 07:57:21 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> - - * rs6000-nat.c (vmap_ldinfo): Issue warning instead of error if - fstat on ldinfo_fd fails. Use objfile->obfd instead of vp->bfd - to check for reference to the same file. - - * target.c (target_read_string): Handle string transfers at the - end of a memory section gracefully. - -Fri Apr 24 17:18:56 1998 Geoffrey Noer <noer@cygnus.com> - - * Makefile.in: enable EXEEXT setting - -Fri Apr 24 11:53:49 1998 David Taylor <taylor@texas.cygnus.com> - - * tracepoint.c (add_local_symbols): change type of type from - char to int so that type shows up as 'A' or 'L' not 0. - -start-sanitize-r5900 -Fri Apr 24 11:25:07 1998 Jeffrey A Law (law@cygnus.com) - - * mips-tdep.c (mips32_decode_reg_save): Handle 128bit wide - GPR loads/stores generated on the r5900. - (mips_find_saved_regs, mips32_skip_prologue): Likewise. - * mips/tm-r5900.h (R5900_128BIT_GPR_HACK): Define. - * mips/tm-txvu.h (R5900_128BIT_GPR_HACK): Likewise. - -end-sanitize-r5900 -Thu Apr 23 16:37:20 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * README: Minor changes for 4.17 release. - -Thu Apr 23 15:44:39 1998 Per Bothner <bothner@cygnus.com> - - * symfile.c (deduce_language_from_filename): .class implies java. - -Thu Apr 23 12:52:21 1998 Philippe De Muyter <phdm@macqel.be> - - * configure.in (strerror): Check if function must be declared. - * acconfig.h (NEED_DECLARATION_STRERROR): New define slot. - * gdb_string.h (strerror): Function declaration issued if - NEED_DECLARATION_STRERROR. - * configure, config.in: Files regenerated. - -Thu Apr 23 12:27:43 1998 Philippe De Muyter <phdm@macqel.be> - - * symfile.c (simple_overlay_update_1): Do not prefix array address - by `&'. - * bcache.h (BCACHE_DATA_ALIGNMENT): Ditto. - * tracepoint.c (encode_actions): Ditto. - * language.c, complaints.c, utils.c (varargs.h): Do not include that - file here, it is already included indirectly by defs.h. - * dbxread.c (dbx_symfile_init, process_one_symbol): Cast xmalloc return - value to the appropriate pointer type. - * utils.c (floatformat_from_doublest): Ditto. - * tracepoint.c (read_actions, _initialize_tracepoint): Ditto. - (add_memrange): Likewise with xrealloc return value. - * stabsread.c (ref_add): Ditto. - * coffread.c (coff_symfile_init): Likewise for xmmalloc return value. - * elfread.c (elf_symfile_read): Ditto. - * os9kread.c (os9k_symfile_init): Ditto. - -Thu Apr 23 00:32:08 1998 Tom Tromey <tromey@cygnus.com> - - * config.in: Rebuilt. - * acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_STPCPY, HAVE_GETTEXT, - HAVE_LC_MESSAGES): Define. - -Wed Apr 22 15:38:56 1998 Tom Tromey <tromey@cygnus.com> - - * configure: Rebuilt. - * configure.in: Call CY_GNU_GETTEXT. - * Makefile.in (top_builddir): New macro. - (INTL): Define to @INTLLIBS@. - (INTL_DEPS): New macro. - (CDEPS): Reference INTL_DEPS, not INTL. - -start-sanitize-sky -Wed Apr 22 13:40:16 1998 Doug Evans <devans@canuck.cygnus.com> - - * txvu-tdep.c (txvu_print_insn): Fix thinko. - -end-sanitize-sky -Wed Apr 22 12:58:23 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - Handle missing shared libraries during the examination of a core - dump gracefully. - * solib.c (find_solib): Use catch_errors around call to - solib_map_sections. Use warning instead of error if reading of - the shared library name fails. - (solib_map_sections): Change return and argument types to make - it callable from catch_errors. - (symbol_add_stub): Avoid GDB core dump if solib->abfd is NULL. - * irix5-nat.c, osfsolib.c (xfer_link_map_member, solib_map_sections, - symbol_add_stub): Ditto. - -Wed Apr 22 14:34:49 1998 Michael Meissner <meissner@cygnus.com> - - * Makefile.in (INTL*): Add support to link in the intl library, - and to add -I options to its source and object directories. - (INTERNAL_CFLAGS): Ditto. - (C{LIBS,DEPS}): Ditto. - -start-sanitize-sky -Wed Tue 21 17:29:48 1998 Jim Lemke <jlemke@cygnus.com> - * configure.in: Add configure option --with-sim-funit. - -end-sanitize-sky -Tue Apr 21 11:20:54 1998 Frank Ch. Eigler <fche@cygnus.com> - - * mips-tdep.c (gdb_print_insn_mips): Disassemble MIPS instructions - with subtarget-specific `mach', rather than fixed default. - * config/mips/tm-mips.h (TM_PRINT_INSN_MACH): New macro, default - disassembly `mach'. -start-sanitize-r5900 - * config/mips/tm-r5900.h (TM_PRINT_INSN_MACH): Override. -end-sanitize-r5900 -start-sanitize-sky - * config/mips/tm-txvu.h (TM_PRINT_INSN_MACH): Override. -end-sanitize-sky - -Mon Apr 20 15:35:03 1998 Philippe De Muyter <phdm@macqel.be> - - * coffread.c (decode_base_type): Treat a long field with size greater - than TARGET_LONG_BIT as long long. - * values.c (value_from_longest): Print code value in error message. - -Mon Apr 20 15:32:21 1998 Mark Kettenis <kettenis@phys.uva.nl> - - * gdb/gdb_string.h (strdup): Declare only if not defined as a - macro. - -Mon Apr 20 14:18:45 1998 J. Kean Johnston <jkj@sco.com> - - * procfs.c: Added replacement macros for LWP stuff. Fixed support - for UnixWare / SVR4.2MP targets and any targets which use - multi-file /proc entries. Fixed support for hardware watchpoints. - * solib.c: SCO needs some of the same code as SunOS. Change - preprocessor conditionals. - - * config/i386/i386sco5.mt: New file. - * config/i386/tm-i386sco5.h: New file. - * config/i386/i386sco5.mh (NATDEPFILES): add i386v-nat.o. - * config/i386/nm-i386v42mp.h - (TARGET_HAS_HARDWARE_WATCHPOINTS): define. - Add other macros for hardware assisted watchpoints. - * config/i386/nm-i386sco5.h: Correct attributions. - (TARGET_HAS_HARDWARE_WATCHPOINTS): define. - * config/i386/nm-linux.h (target_remote_watchpoint): Pass - 'type' through to i386_insert_watchpoint. - -Mon Apr 20 14:12:30 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * infrun.c (wait_for_inferior): Don't add signalled processes - as new threads. - * procfs.c (wait_fd): Note if LWP has exited. - (procfs_wait): use GETPID to get process ID. - -Sat Apr 18 15:21:04 1998 Stan Cox <scox@cygnus.com> - - * configure.tgt: Added sparc86x support. - -Thu Apr 16 13:13:24 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * rdi-share/etherdrv.c (EthernetWrite): Use strerror to get - error string if in an ANSI C-ish environment. - -Wed Apr 15 18:59:48 1998 Mark Alexander <marka@cygnus.com> - - * sparc-tdep.c (SPARC_HAS_FPU): Define. - (sparc_extract_return_value): New function, required to handle - machines without floating point. - (sparc_store_return_value): Ditto. - * config/sparc/tm-sparc.h (EXTRACT_RETURN_VALUE): Call - sparc_extract_return_value instead of using inline code. - (sparc_extract_return_value): Declare. - (STORE_RETURN_VALUE): Call sparc_store_return_value instead - of using inline code. - (sparc_store_return_value): Declare. - -Wed Apr 15 12:19:42 1998 Martin M. Hunt <hunt@cygnus.com> - - * solib.c (enable_break): Only call warning once - instead of three times. - -Tue Apr 14 16:52:59 1998 Mark Alexander <marka@cygnus.com> - - * sparc-tdep.c (sparc_extract_struct_value_address): Make it - work correctly on little-endian hosts. - (sparc_push_arguments): New function. - (gdb_print_insn_sparc): New function. - (_initialize_sparc_tdep): Make gdb_print_insn_sparc the default - disassembler, so that SPARClite-specific instructions will - be recognized. - * sparcl-tdep.c (readchar): Print debugging information. - (debug_serial_write): New function, a replacement for SERIAL_WRITE - that prints debugging information. - * config/sparc/tm-sparc.h (PUSH_ARGUMENTS): Define. - (sparc_push_arguments): Declare. - -Tue Apr 14 15:43:49 1998 John Metzler <jmetzler@cygnus.com> - - * gdbcfgxref (xref_menu): Call new regex and wild card searches - Now you can type in a specific triple like mips64-vr4300-elf or - somthing like mips*.h - (triple_search, wildcardsearch): The new functions - -start-sanitize-vr4320 - * configure.tgt: Switch over to use tm-4320.h. Since I switched to - MIPS EABI the fixes are no longer backward compatible with 4300. - * tm-vr4320.h: Added - * vr4320.mt: Added - -end-sanitize-vr4320 -Mon Apr 13 16:28:07 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * utils.c (warning): added call to warning_hook - - * source.c (find_source_lines): modified to call warning in case - of source vs. executable time stamp mismatch. Simplified object - file check. Initialized mtime to 0. - - * defs.h: added warning_hook prototype - - * top.c: added warning_hook prototype. - -Mon Apr 13 09:54:08 1998 Keith Seitz <keiths@andros.cygnus.com> - - * config/sparc/tm-sun4os4.h (IS_STATIC_TRANSFORM_NAME): Add missing - definition. - -Fri Apr 10 22:36:28 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - Update support for x86 Solaris 2. - * config/i386/tm-i386sol2.h, nm-i386sol2.h: New configuration - files for x86 Solaris 2. - * config/i386/i386sol2.mt, i386sol2.mh: Use them. - * config/sparc/tm-sun4sol2.h (PROCFS_GET_CARRY): New macro, extract - carry flag from a given regset. - (IS_STATIC_TRANSFORM_NAME): New macro, check if a symbol name - is a SunPro transformed name. - * i386-tdep.c (sunpro_static_transform_name): New function to - extract the source name from a SunPro transformed name. - * inferior.h (procfs_first_available, procfs_get_pid_fd): - Add prototypes. - * infrun.c (wait_for_inferior): Handle breakpoint hit in - signal handler without intervening stop in sigtramp. - * procfs.c (procfs_lwp_creation_handler): Use PROCFS_GET_CARRY - instead of direct access to the status register. - (procfs_get_pid_fd): New function, returns procfs fd for a given pid. - * sol-thread.c (ps_lgetLDT): New function, returns LDT for a given - lwpid. - (sol_find_new_threads): Handle failed libthread_db initialization - gracefully. - * stabsread.c (define_symbol): Use IS_STATIC_TRANSFORM_NAME - to check for a SunPro transformed symbol name. - -Fri Apr 10 10:35:35 1998 John Metzler <jmetzler@cygnus.com> - - * utils.c (fmthex): A formatting function for hexdumps - - * mips-tdep.c (unpack_mips16): Fixed instruction decoding, lots of - bit pattern interpretations. mips_fetch_instruction does not work - for 16 bit instructions. Some confusion remains about sign - extension in backward branches. - (mips32_relative_offset): Sign extension - (mips32_next_pc): Major debugging, bit pattern interpretation - (print_unpack): debugging printf - (fetch_mips_16): new funtion, key on PC low bit, not symbol table - (mips16_next_16): Initial major debugging of this function. Lots - of bit pattern mistakes. - (mips_next_pc): key on low bit of PC, not symbol table. - * symfile.c (generic_load): Added a download verification which - reads back the loaded code. Download chunk size is now a defined - macro. Fixed a bug in which downloading slips into loading one - byte at a time. Lower level functions in monitor.c can load long - sequences of bytes and make use of these fixups. Referencing - bfd-start_address directly was incorrectly getting zero for start. - -Thu Apr 9 19:20:32 1998 Ian Lance Taylor <ian@cygnus.com> - - * mips-tdep.c (do_fp_register_row): Use alloca rather than arrays - with dynamic size. - -Wed Apr 8 19:21:42 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * top.c (print_gdb_version): Print 1998 now. - -Wed Apr 8 16:57:22 1998 Philippe De Muyter <phdm@macqel.be> - - * source.c: Remove obsolete decl of strstr(). - -Wed Apr 8 16:47:33 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * solib.c (solib_create_inferior_hook): Remove Ulrich Drepper's - patch of March 23 1998. - * breakpoint.c (breakpoint_re_set_one): Remove Ulrich Drepper's - patch of March 23 1998. - -Sat Apr 4 10:05:00 1998 Dawn Perchik <dawn@cygnus.com> - - * mdebugread.c (parse_partial_symbols): If this is an .mdebug - section in an ELF file, override a symbol's ECOFF section with its - ELF section. Also, fix stabs continuation where a stabs string - continues for more than one continuation. - -Mon Apr 6 09:17:48 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * mips-tdep.c (mips_push_arguments): Specify dimention of valbuf - using MAX_REGISTER_RAW_SIZE. - -Sat Apr 4 10:05:00 1998 Dawn Perchik <dawn@cygnus.com> - - * infrun.c: Fix prototype of signals_info to match static funtion. - -Thu Apr 2 12:47:41 1998 Frank Ch. Eigler <fche@cygnus.com> - - * sol-thread.c (sol_thread_store_registers): Save & restore new - value of single updated register to prevent accidental clobbering. - -Wed Apr 1 22:01:09 1998 Mark Alexander <marka@cygnus.com> - - * config/sparc/tm-sparclite.h (TARGET_BYTE_ORDER_SELECTABLE): Define. - * config/sparc/sparclite.mt: Link in the erc32 simulator. - -Wed Apr 1 16:30:49 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au> - - * ns32k-tdep.c (flip_bytes, ns32k_localcount, - ns32k_get_enter_addr, sign_extend): Restore functions mysteriously - deleted. - - * ns32knbsd-nat.c: New (?) file to support fetching and storing - registers on NetBSD hosts. - - * nbsd.mh (NATDEPFILES): put ns32knbsd-nat.o instead of - ns32k-nat.o - - * ns32km3-nat.c (reg_offset): Get order of floating point - registers correct. Add extra 32382 register offsets. - (REG_ADDRESS): define to point at correct part of thread - state. Use calls to "warning" instead of "message". - - * tm-nbsd.h, tm-ns32km3.h (REGISTER_NAMES, NUM_REGS, - REGISTER_BYTES, REGISTER_BYTE): redefine allowing for 32382 - fpu registers. - -Wed Apr 1 13:43:07 1998 Philippe De Muyter <phdm@macqel.be> - - * NEWS: m68k-motorola-sysv host support added. - * coffread.c (coff_start_symtab): Accept the filename as an argument, - set it here. Callers updated. - -Wed Apr 1 23:13:23 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * config/mips/tm-mips.h (REGISTER_VIRTUAL_TYPE): Handle 32 bit SR, - FSR and FIR registers. - (REGISTER_VIRTUAL_SIZE): Compute using REGISTER_VIRTUAL_TYPE. - (REGISTER_RAW_SIZE): Define using REGISTER_VIRTUAL_SIZE. - - * config/mips/tm-mips64.h: Ditto. - -Tue Mar 31 21:30:39 1998 Nick Clifton <nickc@cygnus.com> - - * arm-tdep.c (gdb_print_insn_arm): Attach a fake Thumb symbol - vector to the info structure when disassembling thumb - instructions. - - * coffread.c (coff_symtab_read, read_one_sym, - process_coff_symbol): Support Thumb symbol types. - - * dbxread.c (process_one_symbol): Call SMASH_TEXT_ADDRESS (if it - is defined) for function symbols. - -Tue Mar 31 16:39:28 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * tracepoint.c (get_tracepoint_by_number): change warning to note. - (delete_trace_command): suppress y/n query if no tracepoints, or - if not from_tty. (trace_pass_command): reject junk at end of args. - (read_actions): an action list consisting only of "end" is discarded. - (validate_actionline (for collect command)): an argument beginning - with a dollar_sign but not recognized as a special argument is - parsed like any other expression -- if it isn't a register name, - it's rejected. Also reject an empty argument to while-stepping. - (trace_find_command): reject a negative frame number argument. - (_initialize_tracepoint): set $traceframe initially to -1. - -Mon Mar 30 16:42:12 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * rdi-share/Makefile.am, rdi-share/aclocal.m4, - rdi-share/configure: New files. - * rdi-share/configure.in: Rewritten to be an autoconf input file. - * rdi-share/Makefile.in, rdi-share/configure: Generated by - automake/autoconf. - * rdi-share/dbg_hif.h, etherdrv.c, hostchan.c: Use autoconf tests - to check environment. - -Sun Mar 29 15:17:16 1998 Keith Seitz <keiths@onions.cygnus.com> - - * tracepoint.c (trace_start_command): Set trace_running_p. - (trace_stop_command): Clear trace_running_p. - -Sat Mar 28 15:19:48 1998 Stan Shebs <shebs@andros.cygnus.com> - - * NEWS: Update for 4.17 release. - -Fri Mar 27 10:15:50 1998 David Taylor <taylor@tito.cygnus.com> - - * tracepoint.c (parse_and_eval_memrange): Fix memory leaks. - (encode_actions): Use the new gen_trace_for_expr function - instead of expr_to_address_and_size; collect registers when - using expressions. (clear_collection_list): Fix memory leak. - -1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com> - - * ax-gdb.h (gen_trace_for_expr): Add prototype. - -Thu Mar 26 17:24:23 1998 David Taylor <taylor@texas.cygnus.com> - - * tracepoint.c (validate_actionline): Fix memory leak. - (encode_actions): Fix memory leak. - -Thu Mar 26 16:16:55 1998 David Taylor <taylor@tito.cygnus.com> - - * tracepoint.c (trace_mention): New function. - (trace_command): Call it. - -1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com> - - * ax-general.c (ax_reqs): New function. - * ax.h (enum agent_flaws, struct agent_reqs): New types. - (agent_reqs): New extern prototype. Well, actually, this was - there before, due to a premature checkin. - (struct aop_map): Add new `data_size' member. - * ax-general.c (aop_map): Supply its value. - * ax-gdb.c (agent_command): Call ax_reqs, for testing. - - * ax-general.c (ax_print): If we encounter an invalid or - incomplete opcode, don't abort; just print an error message. - - * ax-gdb.c: Generate trace bytecodes, as appropriate. - (trace_kludge): New variable. - (gen_fetch, gen_bitfield_ref): Emit trace bytecodes, if asked - nicely. - (expr_to_agent): Ask for no trace bytecodes. - (gen_trace_for_expr): New function. - (agent_command): Call it, and display the result appropriately --- - no struct axs_value, so no type or kind information. - - * ax-gdb.c: Use TARGET_CHAR_BIT throughout, not HOST_CHAR_BIT. - -Thu Mar 26 22:29:28 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - * tracepoint.c (trace_status_command): Recognize a boolean return - value from the stub to indicate whether trace experiment is - running. Export this value as a global state variable. - (trace_running_p) for use by the GUI. (from Michael Snyder) - (trace_pass_command) added call to modify_tracepoint_hook. - - * tracepoint.h export trace_running_p. - -Thu Mar 26 13:08:01 1998 David Taylor <taylor@texas.cygnus.com> - - * tracepoint.c (validate_actionline): do not error out if - exp->elts[0].opcode is not on short line -- let - expr_to_address_and_size handle it. - -1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com> - - * tracepoint.c: Include "ax.h", not "agentexpr.h". - - * tracepoint.c (encode_actions): Call expr_to_address_and_size, - not simply expr_to_agent. - - * ax-general.c: Comment out code in progress, so everyone else can - at least compile. - - * gdbtypes.c: Doc fix. - - * ax.h, ax-gdb.h, ax-general.c, ax-gdb.c: New files. - * Makefile.in (REMOTE_OBJS): Add ax-general.o and ax-gdb.o. - (SFILES): Add ax-general.c, ax-gdb.c. - (ax_h): New variable. - (ax-general.o, ax-gdb.o): New rules. - -start-sanitize-sky -Wed Mar 25 11:45:19 1998 Frank Ch. Eigler <fche@cygnus.com> - - * configure.in (sim-gpu2): Added target type checking to make - --with-sim-gpu2 option only valid for sky target. - * configure: Regenerated. -end-sanitize-sky - -Tue Mar 24 16:22:40 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk> - - * Makefile.in: Derive SHELL from configure. - * config/d10v/d10v.mt config/m32r/m32r.mt - config/mn10200/mn10200.mt config/mn10300/mn10300.mt - config/d30v/d30v.mt: Remove -lm from SIM. This prevents - dependency checking of -lm (under NT native builds). (It is - automatically added by configure if it exists.) - * doc/configure mswin/configure nlm/configure - testsuite/gdb.base/configure testsuite/gdb.c++/configure - testsuite/gdb.chill/configure testsuite/gdb.disasm/configure - testsuite/gdb.stabs/configure testsuite/gdb.threads/configure: - Regenerate with autoconf 2.12.1 to fix shell issues for NT native - builds. - -Mon Mar 23 18:10:57 1998 Ulrich Drepper (drepper@cygnus.com) - - * solib.c (solib_create_inferior_hook): Rewrite previous - change to check the type of file via BFD. - -Mon Mar 23 13:52:28 1998 Ulrich Drepper (drepper@cygnus.com) - - * breakpoint.c (breakpoint_re_set_one): Treat bp_shlib_events - like bp_breakpoints. - * solib.c (solib_create_inferior_hook): Relocate section addresses - if the alleged start address doesn't agree with the PC. - -start-sanitize-sky -Mon Mar 23 13:07:22 1998 Frank Ch. Eigler <fche@cygnus.com> - - * configure.in (sim-gpu2): Added --with-sim-gpu2 as configure - option, to allow gdb+sim linking with sky GPU2 library. - * configure: Regenerated. - -end-sanitize-sky -Sat Mar 21 19:34:49 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com> - - merged changes from Foundry (list follows by file/author): - - - Tom Tromey <tromey@cygnus.com> - * Makefile.in (gdbres.o): New target. - (WINDRES): New define. - * configure: Rebuilt. - * configure.in (WINDRES): Define. - (CONFIG_OBS): Include gdbres.o on Windows. - * gdbtool.ico: New file. - * gdb.rc: New file. - - * ser-unix.c - - Keith Seitz <keiths@onions.cygnus.com> - (wait_for): Don't reset the timeout_remaining for CYGWIN32, - since we now effectively poll the serial port. - Don't reset the current_timeout, either, since this member is used - by hardwire_readchar to track the timeout and call the ui_loop_hook. - (hardwire_readchar): Poll the serial port for Cygwin32. We timeout - every second, update the UI, and loop around doing this until we - have hit the real timeout or we get data or an error. This will - allow the UI to stay active while gdb is "blocked" talking to the - target. - - Martin M. Hunt <hunt@cygnus.com> - (wait_for): Do reset current_timeout because it is only used to - keep track of what the current timeout for the scb is. - - * top.c - - Martin M. Hunt <hunt@cygnus.com> - (quit_confirm): Change exit message again - for GUI. - (pc_changed_hook): Add prototype. - - Tom Tromey <tromey@cygnus.com> - (quit_confirm): Added missing `else'. - (quit_confirm): Special-case message if init_ui_hook is - set. - - * symtab.c - - Martin M. Hunt <hunt@cygnus.com> - (find_pc_sect_line): If no symbol information - is found, return correct pc anyway. - (find_methods): Comment out an apparently - bogus error message because it messes up Foundry. - - * serial.c - - Martin M. Hunt <hunt@cygnus.com> - (_initialize_serial): Add a description of - "set remotelogbase". - - * findvar.c - - Martin M. Hunt <hunt@cygnus.com> - (write_register_gen): Add call to - pc_changed_hook if the PC is being changed. - - * defs.h - - Martin M. Hunt <hunt@cygnus.com> - (pc_changed_hook): Define. - - * command.c - - Martin M. Hunt <hunt@cygnus.com> - (do_setshow_command): If no arguments are supplied, - don't dump core, instead print out an error message. - - * breakpoint.c - - Martin M. Hunt <hunt@cygnus.com> - Make set_raw_breakpoint, set_breakpoint_count, - and breakpoint_count non-static so they are accessible from - elsewhere. - (enable_breakpoint): Enable breakpoint - with same disposition instead of changing all breakpoints - to donttouch. - - * annotate.h - - Keith Seitz <keiths@onions.cygnus.com> - Add declarations for annotation hooks. - - * annotate.c - - Keith Seitz <keiths@onions.cygnus.com> - Add hooks: annotate_starting_hook, annotate_stopped_hook, - annotate_signalled_hook, annotate_exited_hook. - (annotate_starting): If hook exists, call it instead. - (annotate_stopped): If hook exists, call it instead. - (annotate_exited): If hook exists, call it instead. - (annotate_signalled): If hook exists, call it instead. - -Fri Mar 20 14:45:36 1998 Michael Snyder <msnyder@cleaver.cygnus.com> - - * gdbserver/Makefile.in: add dependency on XM_CLIBS. - * gdbserver/low-sim.c (registers) force into alignment. - (create_inferior): Fix typo on new_argv; add abfd arg to - sim_open, sim_create_inferior. Add reg_size arg to - sim_fetch_register, sim_store_register. Make simulator - take a single-step to get into a known running state. - * gdbserver/gdbreplay.c: include fcntl.h for def'n of F_SETFL. - * gdbserver/server.c: Add remote_debug variable to control - debug output. - * gdbserver/server.h: Add prototypes for enable/disable_async_io. - * gdbserver/remote-utils.c: add verbose debugging output controlled - by "remote_debug" variable. Add call to "disable_async_io()" - to avoid being killed by async SIGIO signals. - * config/m32r/m32r.mt: define GDBSERVER_(LIBS and DEPFILES), - so that gdbserver can be built with the m32r simulator. - -Fri Mar 20 09:04:06 1998 Andrew Cagney <cagney@b1.cygnus.com> - -start-sanitize-r5900 - * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE): Redefine as - expression from REGISTER_VIRTUAL_TYPE. - (REGISTER_RAW_SIZE): Ditto. - (REGISTER_VIRTUAL_TYPE): Redefine, use explicit size for 32 bit - registers. - -end-sanitize-r5900 - * gdbtypes.h (builtin_type_{,u}int{8,16,32,64}): New gdb builtin - types. -start-sanitize-r5900 - (builtin_type_{,u}int128): Ditto. -end-sanitize-r5900 - - * gdbtypes.c (_initialize_gdbtypes): Initialize new types. - - * mips-tdep.c (do_gp_register_row): Pad register value when GP - register is smaller than MIPS_REGSIZE. - - * findvar.c (value_of_register): When raw and virtual register - values identical, check that sizes are consistent. - -Thu Mar 19 11:32:15 1998 Michael Snyder (msnyder@cleaver.cygnus.com) - - * minsyms.c (compare_minimal_symbols): If addresses are identical, - then compare on names. Sorted list should have symbols with - identical addresses AND names adjacent, so dups can be discarded. - -Wed Mar 18 12:50:17 1998 Jeff Law (law@cygnus.com) - - * stabsread.c (define_symbol): Don't look for ',' as a LRS - indicator. - -Wed Mar 18 10:34:51 1998 Nick Clifton <nickc@cygnus.com> - - * rdi-share/etherdrv.c: Set sys_errlist[] as char * not const char *. - -Fri Mar 13 15:43:53 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * config/mips/xm-mips.h (CC_HAS_LONG_LONG): Undefine for Ultrix - when compiling with native cc, the compiler has broken long long - support. - -Fri Mar 13 15:37:02 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * config/m68k/xm-sun3os4.h: Remove malloc declarations, they - are handled via autoconf now. - * remote.c (remote_ops, extended_remote_ops): Replace static - forward declaration by moving the static definition to the top of - the file, for old K&R compilers. - * tracepoint.c (collect_symbol, trace_start_command): - Replace ANSI string concatenation with K&R compatible simple string. - -1998-03-11 Fred Fish <fnf@ninemoons.com> - - * source.c (select_source_symtab): Don't reach error if we have - a current_source_symtab from reading in partial symbol table. - -start-sanitize-vr4320 -Tue Mar 10 16:15:13 1998 Gavin Koch <gavin@cygnus.com> - - * configure.tgt (mips64*vr4320*el-*-elf*): Removed spurious case. - -end-sanitize-vr4320 -Fri Mar 6 13:10:27 1998 Fred Fish <fnf@cygnus.com> - - * utils.c (quit): Call SERIAL_DRAIN_OUTPUT rather than - SERIAL_FLUSH_OUTPUT. - * serial.h (struct serial_ops): Add drain_output, pointer to - function that waits for output to drain. - (SERIAL_DRAIN_OUTPUT): Macro to wait for output to drain. - * ser-unix.c (hardwire_drain_output): New function and prototype. - - * ser-unix.c (hardwire_ops): Add entry for drain_output function. - * ser-tcp.c (tcp_ops): Ditto. - * ser-ocd.c (ocd_ops): Ditto. - * ser-mac.c (mac_ops): Ditto. - * ser-go32.c (dos_ops): Ditto. - * ser-e7kpc.c (e7000pc_ops): Ditto. - -Thu Mar 5 16:07:41 1998 Michael Snyder (msnyder@cleaver.cygnus.com) - - * sparcl-tdep.c: fix #endif comments - -Thu Mar 5 15:10:35 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * Makefile.in (BISON): Configure substitutes in @YACC@, not @BISON@. - -Thu Mar 5 14:42:41 1998 Keith Seitz <keiths@onions.cygnus.com> - - * ocd.c (ocd_open): If we fail ocd_start_remote, make sure we - error () so that we abort out of bdm_ppc_open. - -Wed Mar 4 16:53:52 1998 Martin M. Hunt <hunt@cygnus.com> - - * serial.c (_initialize_serial): Add a description of - "set remotelogbase". - - * command.c (do_setshow_command): If no arguments are supplied, - don't dump core, instead print out an error message. - -Wed Mar 4 01:39:08 1998 Ron Unrau <runrau@cygnus.com> - - * elfread.c (elf_symtab_read): merge SYMBOL_IS_SPECIAL into - MAKE_MSYMBOL_SPECIAL - * config/mips/tm-mips.h: ditto - -Tue Mar 3 17:19:08 1998 John Metzler <jmetzler@cygnus.com> - -start-sanitize-vr4xxx - * config/mips/tm-vr4xxx.h: implements vr4111 as separate from 4300 - * config/mips/vr4xxx.tm: implements vr4111 as separate from 4300 - * configure.tgt: Recognise mips64vr4111-*-elf as vr4xxx -end-sanitize-vr4xxx - * dwarfread.c (read_tag_pointer_type): Pointer sizes now come from - TARGET_PTR_BIT rather from sizeof(char *) on host. - -Tue Mar 3 14:37:02 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * alpha-nat.c (fetch_osf_core_registers): Renamed from - fetch_aout_core_registers. - (alpha_osf_core_fns): Renamed from alpha_aout_core_fns, change - flavour to bfd_target_unknown_flavour for OSF core files. - -start-sanitize-vr4320 -Tue Mar 3 11:12:39 1998 Gavin Koch <gavin@cygnus.com> - - * configure.tgt (mips64*vr4320*el-*-elf*,mips64*vr4320*-*-elf*): - Added. - -end-sanitize-vr4320 -Mon Mar 2 17:44:13 1998 Michael Snyder (msnyder@cleaver.cygnus.com) - - * breakpoint.c (_initialize_breakpoint): Make "en" an alias - for "enable" (so that it doesn't conflict with "end"). - -Mon Mar 2 17:04:25 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * Makefile (VERSION): Bump to 4.17.1. - -Mon Mar 2 16:59:15 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * rdi-share/etherdrv.c (sys_errlist): Add correct decl for Linux. - -Mon Mar 2 16:51:44 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * Makefile.in (YYFILES): Remove in maintainer-clean, not distclean. - -Mon Mar 2 16:47:11 1998 Philippe De Muyter <phdm@macqel.be> - - * Makefile.in (distclean): Add `rm $(YYFILES)'. - -Mon Mar 2 16:45:48 1998 Philippe De Muyter <phdm@macqel.be> - - * coffread.c (coff_read_enum_type): Set TYPE_FLAG_UNSIGNED if enum - is unsigned. - -Sun Mar 2 15:16:13 1998 Richard Henderson <rth@cygnus.com> - - * configure.host, configure.tgt: Add sparc-linux. - * sparc-nat.c: Include <asm/reg.h> not <machine/reg.h> for Linux. - * config/sparc/*linux*: New files. - -Mon Mar 2 12:12:41 1998 Anthony Thompson (athompso@cambridge.arm.com) - - * arm-tdep.c (gdb_print_insn_arm): Call print_insn_big_arm - if we're big endian; else call print_insn_little_arm. - -Mon Feb 24 11:24:57 1998 Richard Henderson <rth@cygnus.com> - - * Makefile.in (BISON): Don't even pretend to use yacc. - (c-exp.tab.o): Use bison -o to use a unique intermediate file. - (f-exp.tab.o, m2-exp.tab.o): Likewise. - (jv-exp.tab.o): Likewise. - -Tue Feb 24 03:32:59 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * remote-sim.c (gdbsim_fetch_register): Don't abort when the - register size is wrong. - -start-sanitize-r5900 -Tue Feb 24 02:53:41 1998 And<rew Cagney <cagney@b1.cygnus.com> - - * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE, - REGISTE_RAW_SIZE): Re-define. - -end-sanitize-r5900 -Thu Feb 19 16:49:48 1998 John Metzler <jmetzler@cygnus.com> - - * target.c (debug_to_fetch_registers,debug_to_store_registers, - debug-to_insert_breakpoint,debug_to_remove_breakpoint): tracing - 64 bit targets crashed long long printfs. - -Tue Feb 17 16:36:22 1998 Michael Snyder (msnyder@cleaver.cygnus.com) - - * symfile.c (read_target_int_array): rename read_target_long_array - and force the sizeof an ovly_table element to sizeof(long), - instead of sizeof(int). - -Tue Feb 17 18:05:05 1998 Frank Ch. Eigler <fche@cygnus.com> - - * remote-mips.c (mips_request): Use unsigned long during parsing - returned value from monitor, to prevent accidental sign extension. - -Tue Feb 17 14:28:33 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> - - * acconfig.h: FORCE_MMCHECK changed to MMCHECK_FORCE. - * configure.in: Ditto. - * configure: Regenerated. - -Tue Feb 17 14:07:34 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de> - - * gdbtypes.c (check_typedef): Do not try to resolve the length of - a type which has TYPE_FLAG_TARGET_STUB set, if the target type has - set TYPE_FLAG_TARGET_STUB as well. - -Tue Feb 17 14:32:18 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * remote-sim.c (gdbsim_fetch_register, gdbsim_store_register): - Pass register size to sim_{fetch,store}_register. Check nr of - register bytes transfered is correct. - -Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * remote-d10v.c (remote_d10v_open): Call push_remote_target - instead of open_remote_target. - - * remote.c (remote_xfer_memory): Use REMOTE_TRANSLATE_XFER_ADDRESS - to translate addr/size when defined. - (open_remote_target): Delete. - - * target.h (open_remote_target): Delete. - - * config/d10v/tm-d10v.h (REMOTE_TRANSLATE_XFER_ADDRESS): Define. - -Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * d10v-tdep.c (d10v_extract_return_value): Wierd. GCC wants to - return odd sized register quantities with only half of the first - register used! - - * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Use stack when - size > 8. - -Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when - sizeof type > 1. - -Sun Feb 15 16:10:50 1998 Ron Unrau <runrau@cygnus.com> - - * parse.c (write_dollar_variable): call new function - target_map_name_to_register to allow targets to define their own - register name aliases. - * infcmd.c (registers_info): use target_map_name_to_register so that - "print $reg" and "info reg $reg" use the same register name aliases. - -Fri Feb 13 16:40:30 1998 Stan Shebs <shebs@andros.cygnus.com> - - * config/i386/i386mk.mt (OBJFORMATS): Delete, no longer used. - * config/i386/xm-i386mk.h: Fix an include. - * config/pyr/tm-pyr.h (PC_INNER_THAN): Remove, never used. - -Thu Feb 12 16:12:07 1998 Frank Ch. Eigler <fche@cygnus.com> - - * remote-mips.c (mips_enter_debug): Sleep before sending CR to - monitor. - (mips_exit_debug): Accept any whitespace / verbiage before monitor - prompt reappears. - -Thu Feb 12 18:25:42 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * d10v-tdep.c (show_regs): Avoid use of %llx when printing 8 byte - accumulators. - -Thu Feb 12 17:10:22 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * valops.c (value_at): For d10v, make read pointers with - read_target_unsigned_integer, keep addresses unsigned. - (value_fetch_lazy): Ditto. - -Thu Feb 12 12:14:02 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * remote-d10v.c: New file. Layer the d10v GDB->remote memory map - on top of the remote serial memory transfer functions. - - * config/d10v/d10v.mt (TDEPFILES): Add remote-d10v.o - - * Makefile.in (remote-d10v.o): Add dependencies. - - * remote.c (remote_open_1): Add arg extended_p, engage extended - protocol when extended_p. - (remote_open, extended_remote_open): Pass !extended_p / - extended_p to remote_open_1. - - * remote.c (open_remote_target), target.h: New function. - -Wed Feb 11 08:41:15 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * config/i386/fbsd.mh (XDEPFILES): Add ser-tcp.o. - -Tue Feb 10 17:50:37 1998 Keith Seitz <keiths@onions.cygnus.com> - - * tracepoint.c (tracepoint_operation): Call the modify_tracepoint_hook - if it exists. - Remove static declaration of free_actions. - - * tracepoint.h: Add declaration of free_actions. - -Tue Feb 10 12:17:13 1998 Fred Fish <fnf@cygnus.com> - - * symtab.c (decode_line_1): Revert change that mistakenly - removed assignment of sals[0].pc field. - -Mon Feb 10 12:37:47 1998 Philippe De Muyter <phdm@macqel.be> - - * m68k/tm-delta68.h (EXTRACT_RETURN_VALUE): Type argument for - `REGISTER_CONVERT_TO_VIRTUAL is `TYPE', not - `REGISTER_VIRTUAL_TYPE (FP0_REGNUM)'; - (STORE_RETURN_VALUE): Ditto, and offset for `write_register_bytes' - is `REGISTER_BYTE (FP0_REGNUM)', not `FP0_REGNUM'. - (FRAME_NUM_ARGS): New macro. - * m68k/tm-news.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Ditto. - * delta68-nat.c (clear_insn_cache): New function, forgotten in previous - patch. - -Mon Feb 9 11:10:06 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * d10v-tdep.c: Replace references to IMEM_ADDR and DMEM_ADDR with - D10V_MAKE_[DI]ADDR and D10V_CONVERT_[ID]ADDR_TO_RAW macros. - - * config/d10v/tm-d10v.h (IMEM_START): Move to 0x01...... - (DMEM_START): Move to 0x00...... - (STACK_START): Move to 0x00..7ffe. - (D10V_MAKE_IADDR, D10V_MAKE_DADDR): Translate unconditionally. - - * d10v-tdep.c (d10v_xlate_addr): Delete function. - -Mon Feb 9 15:10:21 1998 Fred Fish <fnf@cygnus.com> - - * symtab.c (fixup_psymbol_section): Move forward declaration to - top of file with other such decls. Make it a static function. - * symtab.h: Minor formatting tweaks. - -Mon Feb 9 13:14:12 1998 Stan Shebs <shebs@andros.cygnus.com> - - * config/a29k-udi.mt, config/i960/vxworks960.mt (REMOTE_OBS): - Remove redefinition. - * config/i960/tm-i960.h (BREAKPOINT): Define. - -Mon Feb 9 15:35:38 1998 Ian Lance Taylor <ian@cygnus.com> - - * Makefile.in (init.c): Ignore errors when making init.c. Seems - necessary to work around bug in Solaris make. - -Sun Feb 6 02:44:28 1998 Philippe De Muyter <phdm@macqel.be> - - * m68k/tm-delta68.h (CPLUS_MARKER): Macro deleted. - (EXTRACT_STRUCT_VALUE_ADDRESS): Macro defined. - (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Macros modified - because floating-point values return via %fp0. - (CLEAR_INSN_CACHE): New macro. - * m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL): Macro fixed - to use DOUBLEST. - (REGISTER_CONVERT_TO_RAW): Ditto. - * infptrace.c (child_xfer_memory): If CLEAR_INSN_CACHE is defined, - call it after having written in child process's memory. - * inflow.c (PROCESS_GROUP_TYPE): Macro defined if HAVE_TERMIO. - (gdb_has_a_terminal, terminal_ours_1): Functions fixed for HAVE_TERMIO. - -Fri Feb 6 16:17:30 1998 Jeffrey A Law (law@cygnus.com) - - * config/mips/tm-mips64.h (TARGET_LONG_BIT): Allow final target to - override. - (TARGET_LONG_LONG_BIT): Likewise. - (TARGET_PTR_BIT): Likewise. -start-sanitize-r5900 - * config/mips/tm-r5900.h (TARGET_PTR_BIT): Define to 32 bits. -end-sanitize-r5900 - -start-sanitize-sky -Fri Feb 6 14:33:34 1998 Doug Evans <devans@canuck.cygnus.com> - - * configure.tgt (mips64r5900*-sky-elf*): Replaces txvu-elf. - * config/mips/txvu.mt (SIM): txvu -> mips. - -end-sanitize-sky -Fri Feb 6 17:42:22 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * config/d10v/tm-d10v.h (D10V_CONVERT_IADDR_TO_RAW, - D10V_CONVERT_DADDR_TO_RAW): Define. - - * d10v-tdep.c (d10v_push_arguments): Re-write. Pass arguments in - registers, regardless of their size, when they fit. - -Thu Feb 5 13:16:36 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * d10v-tdep.c (d10v_extract_return_value): For function pointers - translate address to IMAP area. - - * config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Delete dummy from - struct. - (POP_FRAME): Point at generic_pop_current_frame. - - * d10v-tdep.c (d10v_pop_frame): Delete code handling dummy frames, - handled earlier. - (d10v_push_return_address): New function. - (d10v_pop_dummy_frame): Delete. - (d10v_fix_call_dummy): Delete. - (d10v_call_dummy_address): Delete. - - * d10v-tdep.c (d10v_init_extra_frame_info): Clear dummy and - frameless. - - * d10v-tdep.c (d10v_push_arguments): Keep stack word aligned. - - * config/d10v/tm-d10v.h (EXTRACT_STRUCT_VALUE_ADDRESS): Extract - address of structure from first ARG1_REGNUM. - - * d10v-tdep.c (d10v_push_arguments): Force 4 byte args into - even-odd register pair. Store 1 and 2 byte args in registers. - - * valops.c (value_fetch_lazy): Ensure that a D10V function pointer - is fetched in the correct byte order. - (value_at): Ditto. Also ensure data pointers are mapped to data - segment. - - * config/d10v/tm-d10v.h (D10V_DADDR_P, D10V_IADDR_P): - - * d10v-tdep.c: Replace 2 with REGISTER_RAW_SIZE. - (d10v_pop_frame): Replace R13 with LR_REGNUM. - (d10v_push_arguments): Replace R2 with ARG1_REGNUM. - (d10v_push_arguments): Replace 6 with ARGN_REGNUM. - (d10v_extract_return_value): Access return value with RET1_REGNUM. - - * config/d10v/tm-d10v.h (ARG1_REGNUM, ARGN_REGNUM, RET1_REGNUM): - Define. - (STORE_RETURN_VALUE): Specify return register using RET1_REGNUM. - (STORE_STRUCT_RETURN): Specify ARG1_REGNUM as the struct ptr - location. - -Thu Feb 5 13:16:36 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * blockframe.c (generic_pop_dummy_frame): Flush the frame, no - longer valid. - - * blockframe.c (generic_pop_current_frame), frames.h: New - function. - -Thu Feb 5 17:18:16 1998 Andrew Cagney <cagney@b1.cygnus.com> - - * remote-sim.c (gdbsim_create_inferior): clear_proceed_status - before /re/starting the simulator. - -Thu Feb 5 15:55:31 1998 C. M. Heard (heard@vvnet.com) - - * top.c (do_nothing): Remove signal handler after signal is caught. - -Thu Feb 5 11:57:06 1998 Michael Snyder (msnyder@cleaver.cygnus.com) - - * tracepoint.c (tracepoint_operation): call free_actions instead - of free. (free_actions): eliminate some memory leaks for actions. - (validate_actionline): pass string arg by reference, so we can - change the pointer. Change all memrange collection arguments to - canonical form (literal address and size), to enforce early - evaluation. Accept UNOP_MEMVAL (assembly variables) for - trace collection. (parse_and_eval_memrange): accept expressions - for the address and size fields of a memrange (and evaluate - them immediately). (several places): use -1 instead of zero - to distinguish an absolute memrange from a register-relative one. - (encode_actions): add handling for UNOP_MEMVAL (assembly variable). - -Wed Feb 4 17:40:21 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * Makefile.in (SFILES): add tracepoint.c. - (LINTFILES): add @CONFIG_SRCS@. - (SOURCES): Ditto. - * configure.in (CONFIG_SRCS): Mirror use of CONFIG_OBS. - * configure: Regenerated. - -Tue Feb 3 16:12:32 1998 Gordon W. Ross (gwr@mc.com) - - * infptrace.c (child_resume): Don't try to step if - NO_SINGLE_STEP is defined. - -Mon Feb 2 19:06:13 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * Makefile.in (VERSION): Bump to 4.16.2. - -Mon Feb 2 17:18:25 1998 Richard Henderson <rth@cygnus.com> - - * alpha-nat.c (fetch_aout_core_registers): Rename from - fetch_core_registers. - (fetch_elf_core_registers): New function. - (supply_gregset): Use ALPHA_REGSET_BASE. - (supply_fpregset): Likewise. - (fill_fpregset): Likewise. - (alpha_aout_core_fns): Rename from alpha_core_fns. - (alpha_elf_core_fns): New. - * config/alpha/alpha-linux.mh (NATDEPFILES): solib.o not osfsolib.o. - Disable MMALLOC. - * config/alpha/nm-linux.h (SVR4_SHARED_LIBS): Define if ELF. - (TARGET_ELF64): Likewise. - (ALPHA_REGSET_BASE): New. - * config/alpha/nm-osf.h (ALPHA_REGSET_BASE): New. - * config/alpha/tm-alphalinux.h: Include tm-sysv4.h. - - * solib.c (elf_locate_base): Add TARGET_ELF64 support. - (info_sharedlibary_command): Likewise. - - * configure.host: Match alpha*. - * configure.tgt: Likewise. - -Fri Jan 30 15:11:38 1998 David Taylor <taylor@texas.cygnus.com> - - Changes by <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE> - * infrun.c (IN_SOLIB_DYNSYM_RESOLVE_CODE): new macro for detecting - whether we are in the dynamic symbol resolution code - (wait_for_inferior): invoke it. - * solib.c (in_svr4_dynsym_resolve_code): new function - (enable_break): record start and end of the dynamic linker - text and plt sections for use in in_svr4_dynsym_resolve_code. - * solib.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): add svr4 definition; - (in_svr4_dynsym_resolve_code): declare it. - * config/nm-gnu.h (solib.h): move inclusion to after definition - of SVR4_SHARED_LIBS. - * config/nm-sysv4.h (solib.h): ditto. - * config/i386/nm-i386sco5.h (solib.h): ditto. - * config/i386/nm-linux.h (solib.h): ditto. - * config/mips/nm-irix5.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): undefine. - -Thu Jan 29 19:39:31 1998 Stan Shebs <shebs@andros.cygnus.com> - - * coffread.c (coff_symtab_read) [SEM]: Remove code, macro can - never be defined. - * dbxread.c (process_one_symbol) [BLOCK_ADDRESS_ABSOLUTE]: - Remove, no longer needed. - * hppa-tdep.c (N_SET_MAGIC): Remove, no longer used. - * config/pa/xm-hppab.h (SEEK_SET, SEEK_CUR, SEEK_END): Ditto. - * config/mips/tm-mipsm3.h (NUMERIC_REG_NAMES): Ditto. - * config/mips/mipsm3.mt (TDEPFILES): Remove mipsread.o. - -Wed Jan 28 14:46:52 1998 Stan Shebs <shebs@andros.cygnus.com> - - Suggested by Chris Walter <walter@budoe.bu.edu>: - * dwarfread.c (set_cu_language): Recognize Fortran. - * dwarf2read.c (set_cu_language): Ditto. - (read_array_type): Fix language test. - -Wed Jan 28 12:51:08 1998 Michael Snyder (msnyder@cleaver.cygnus.com) - - * blockframe.c (generic_frame_chain_valid): A frame pointer may - be valid if it is equal to the frame pointer of its caller (ie. - not necessarily strictly INNER_THAN). Allows frameless functions. - -Wed Jan 28 11:23:25 1998 Mark Alexander <marka@cygnus.com> - - * monitor.c (monitor_vsprintf): New function to handle - printing of large addresses using %A format specifier. - (monitor_printf_noecho, monitor_printf): Use monitor_vsprintf - instead of vsprintf. - * dve3900-rom.c (_initialize_r3900_rom): Use %A instead of %Lx - to print addresses. - -Tue Jan 27 16:14:23 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * configure.in (CONFIG_LDFLAGS): Only add -export-dynamic - when using GNU ld. - -Mon Jan 26 19:07:46 1998 Jason Molenda (crash@bugshack.cygnus.com) - - * config/alpha/tm-alphalinux.h (alpha_linux_sigtramp_offset): - Add closing parenthesis. From HJ Lu. - -Mon Jan 26 17:54:45 1998 Mark Alexander <marka@cygnus.com> - - * dve3900-rom.c: Improve performance by using memory commands - that print less fluff. Minor cosmetic changes. - Eliminate compiler warnings. - -Sat Jan 24 23:44:43 1998 Martin M. Hunt <hunt@cygnus.com> - - * breakpoint.c (enable_breakpoint): Preserve breakpoint - disposition when enabling a breakpoint. - - * symtab.c (find_pc_sect_line): If no symbol information - is found, return correct pc anyway. - -Fri Jan 23 17:26:22 1998 Stan Shebs <shebs@andros.cygnus.com> - - * configure.host (i[3456]86-*-osf1mk*, mips-*-mach3*, - ns32k-*-mach3*): Fix file names. - (i[3456]86-*-os9k, m88*-*-mach3*, w65-*-*): Remove config - recognition, no source files for these. - * configure.tgt (powerpc-*-aix4*): Remove config, now identical - to powerpc-*-aix*. - * config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: Remove files, - no longer needed. - -Fri Jan 23 16:49:41 1998 Mark Alexander <marka@cygnus.com> - - * monitor.c (monitor_write, monitor_readchar): New functions. - * monitor.h (monitor_write, monitor_readchar): Declare. - * dve3900-rom.c: Add support for fast loading on ethernet connections. - -Fri Jan 23 07:47:06 1998 Fred Fish <fnf@cygnus.com> - - * config/d10v/tm-d10v.h (CALL_DUMMY): Define as "{ 0 }". - (TARGET_READ_FP): Define to d10v_read_fp rather than d10v_read_sp. - (TARGET_WRITE_FP): Define to d10v_write_fp rather than d10v_write_sp. - (d10v_write_fp, d10v_read_fp): Add prototypes. - * symtab.c (decode_line_1): Remove assignment of sals[0].pc field. - * symfile.c (simple_overlay_update, simple_overlay_update_1): - Ignore the size of overlay sections. This check is redundant anyway. - * printcmd.c (print_frame_args): Ditto. - * valops.c (value_fetch_lazy): Ditto. - * values.c (unpack_long): Ditto. - * d10v-tdep.c (d10v_frame_chain, d10v_frame_find_saved_regs, - d10v_init_extra_frame_info): Fix some minor bugs so the finish command - works properly. - (show_regs): Change num1 and num2 types from "long long" to "LONGEST". - (d10v_read_fp, d10v_write_fp): New functions. - (d10v_push_arguments): Remove unneeded assigns to "val" and "contents". - (d10v_push_arguments): Fix for pointers and structs. - (d10v_extract_return_value): Fix for pointers and chars. - -Tue Jan 20 18:53:18 1998 Stan Shebs <shebs@andros.cygnus.com> - - * configure.tgt (i386-*-mach*, m88*-*-mach3*): Remove config - recognition, no source files for these (note that the i386 Mach - config is for pre-Mach 3). - (mips*-*-mach3*, ns32k-*-mach3*): Fix file names. - * config/mips/mipsel64.mt: Remove, never referenced. - -Mon Jan 19 14:01:28 1998 Stan Shebs <shebs@andros.cygnus.com> - - * top.c (print_gdb_version): Restore to original message. - -Mon Jan 19 13:34:40 1998 Ian Lance Taylor <ian@cygnus.com> - - From cgf@bbc.com (Chris Faylor): - * win32-nat.c (child_mourn_inferior): Call ContinueDebugEvent to - let the child exit. - (child_kill_inferior): Respond to all debug events as the child is - terminating. - - * Makefile.in (all): Change gdb dependency to gdb$(EXEEXT). - (uninstall): Add $(EXEEXT) to file name to remove. - (gdb$(EXEEXT)): Rename target from plain gdb. - (gdb1$(EXEEXT)): Rename target from plain gdb1. - (clean, mostlyclean): Add $(EXEEXT) to binary names to remove. - -1998-01-16 Felix Lee <flee@cygnus.com> - - * top.c (print_gdb_version): delete stutter. - -Thu Jan 15 12:29:13 1998 Nick Clifton <nickc@cygnus.com> - - * remote-rdi.c (arm_rdi_open): Patch from Tony.Thompson@arm.com - to prevent spurous error messages on non-ICE targets. - -Wed Jan 14 19:27:02 1998 Stan Shebs <shebs@andros.cygnus.com> - - * config/mips/{r3900.mt,r3900l.mt,tm-r3900.h,tm-r3900l.h}: - Remove, no longer used. - -Wed Jan 14 18:11:26 1998 Michael Meissner <meissner@cygnus.com> - - Patch from Jim Wilson. - * d30v-tdep.c (d30v_frame_find_saved_regs_offsets): Properly - declare void function before use. - - * config/d30v/tm-d30v.h (CALL_DUMMY): Initialize as { 0 }, not {}. - -Tue Jan 13 16:38:48 1998 Fred Fish <fnf@cygnus.com> - - * configure.in (--with-mmalloc): Add new configure arg to use the - mmalloc package. Default is to not use it. - (START_INFERIOR_TRAPS_EXPECTED): Define to the integer 2, not - the string "2". - * acconfig.h (USE_MMALLOC, FORCE_MMCHECK): Add #undef. - * configure: Regenerated. - * config.in: Regenerated. - * Makefile.in (MMALLOC_DIR, MMALLOC_SRC): Remove. - (MMALLOC): Set using configure. - (MMALLOC_CFLAGS): Set using configure. - - * config/i386/tm-linux.h (sys_quotactl): Define to 1 rather - than just defining it. - * mpw-make.sed: Undefine USE_MMALLOC rather than defining NO_MMALLOC. - * utils.c (NO_MMALLOC): Use USE_MMALLOC instead. - * objfiles.c: ditto. - * defs.h: ditto. - - * config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Remove. - * config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Remove. - * config/i386/cygwin32.mh (MMALLOC_CFLAGS): Remove. - * config/alpha/alpha-osf3.mh (MMALLOC_CFLAGS): Remove. - * config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Remove. - * gdbserver/Makefile.in (MMALLOC_*): Remove. - * config/rs6000/rs6000.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/rs6000/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/powerpc/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/powerpc/aix.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/ns32k/ns32km3.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/mips/mipsm3.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/mips/decstation.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/m88k/cxux.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/i386/xm-windows.h (NO_MMALLOC, NO_MMCHECK): Remove. - * config/i386/i386mk.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/i386/i386m3.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/i386/i386gnu.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/alpha/alpha-osf1.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - * config/alpha/alpha-linux.mh (MMALLOC, MMALLOC_CFLAGS): Remove. - -Mon Jan 12 11:46:51 1998 Michael Snyder (msnyder@cleaver.cygnus.com) - - * config/m68k/tm-m68k.h (REGISTER_VIRTUAL_TYPE): make A0 thru A7 - default to void pointer type (so that their default radix is hex). - - * symtab.c: move rbreak_command from no_class to class_breakpoint - so it will be listed under "help breakpoints". - -Sat Jan 10 14:58:04 1998 Stan Shebs <shebs@andros.cygnus.com> - - * rdi-share/hostchan.c: Remove gettimeofday declaration. - -Thu Jan 8 11:03:59 1998 Nick Clifton <nickc@cygnus.com> - - * remote-rdp.c: Applied patches submitted by Tony.Thompson@arm.com - to implement the Angel remote debugging interface. - - * Makefile.in: Add build rules for remote-rdi.c and - rdi-share/libangsd.a. - - * configure.tgt: Updated from source on branch. - * config/arm/tm-arm.h: Updated from source on branch. - * arm-tdep.c: Updated from source on branch. - - * rdi-share: New directory, RDI library contributed by ARM. - -Mon Jan 5 20:21:59 1998 Mark Alexander <marka@cygnus.com> - - * monitor.h (MO_PRINT_PROGRAM_OUTPUT): Define. - * monitor.c (monitor_wait): Echo program output. - * dve3900-rom.c (_initialize_r3900_rom): Remove MO_HANDLE_NL flag, - add MO_PRINT_PROGRAM_OUTPUT flag. - -Mon Jan 5 18:21:11 1998 David Taylor <taylor@texas.cygnus.com> - - * top.h (HAVE_SIGSETJMP): define SIGJMP_BUF, SIGSETJMP, and - SIGLONGJMP appropriately based on whether HAVE_SIGSETJMP is - defined. - * top.c (return_to_top_level, catch_errors): use the new macros - * main.c (SET_TOP_LEVEL): ditto. - * config/xm-sysv4.h (HAVE_SIGSETJMP): Define. - -Fri Jan 2 18:48:58 1998 Mark Alexander <marka@cygnus.com> - - * configure.in: Double up brackets in shell case pattern. - -Fri Jan 2 17:06:05 1998 Michael Snyder (msnyder@cleaver.cygnus.com) - - * tracepoint.c (finish_tfind_command): improved algorithm for - deciding when we've "stepped" into a new stack frame. - (map_args_over_tracepoints): loop over tracepoint list "safely", - since list elements may be deleted during loop. - (read_actions): add actions to history list. - -For older changes see ChangeLog-97 - -Local Variables: -mode: change-log -left-margin: 8 -fill-column: 74 -version-control: never -End: |