aboutsummaryrefslogtreecommitdiff
path: root/binutils/aclocal.m4
diff options
context:
space:
mode:
Diffstat (limited to 'binutils/aclocal.m4')
-rw-r--r--binutils/aclocal.m4769
1 files changed, 15 insertions, 754 deletions
diff --git a/binutils/aclocal.m4 b/binutils/aclocal.m4
index 2d62d71..b468950 100644
--- a/binutils/aclocal.m4
+++ b/binutils/aclocal.m4
@@ -12,6 +12,21 @@ dnl PARTICULAR PURPOSE.
sinclude(../bfd/acinclude.m4)
+dnl sinclude(../libtool.m4) already included in bfd/acinclude.m4
+dnl The lines below arrange for aclocal not to bring libtool.m4
+dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
+dnl to add a definition of LIBTOOL to Makefile.in.
+ifelse(yes,no,[
+AC_DEFUN([AM_PROG_LIBTOOL],)
+AC_SUBST(LIBTOOL)
+])
+
+dnl sinclude(../gettext.m4) already included in bfd/acinclude.m4
+ifelse(yes,no,[
+AC_DEFUN([CY_WITH_NLS],)
+AC_SUBST(INTLLIBS)
+])
+
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.
@@ -104,415 +119,6 @@ else
fi
AC_SUBST($1)])
-
-# serial 40 AC_PROG_LIBTOOL
-AC_DEFUN(AC_PROG_LIBTOOL,
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN(AC_LIBTOOL_SETUP,
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_RANLIB])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-dnl
-
-case "$target" in
-NONE) lt_target="$host" ;;
-*) lt_target="$target" ;;
-esac
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
- [ --disable-libtool-lock avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$lt_target" in
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case "`/usr/bin/file conftest.o`" in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw*)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
- ;;
-])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_SHARED, [dnl
-define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_STATIC, [dnl
-define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
-define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AC_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
- case "$ac_prog" in
- # Accept absolute paths.
-changequote(,)dnl
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
-changequote([,])dnl
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- ac_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-else
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN(AC_PROG_LD_GNU,
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- ac_cv_prog_gnu_ld=yes
-else
- ac_cv_prog_gnu_ld=no
-fi])
-])
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AC_PROG_NM,
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(ac_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- ac_cv_path_NM="$NM"
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
- break
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
- break
- else
- ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-fi])
-NM="$ac_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM,
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case "$lt_target" in
-*-*-beos* | *-*-cygwin*)
- # These system don't have libm
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, main, LIBM="-lm")
- ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library, adds --enable-ltdl-convenience to
-# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'. Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case "$enable_ltdl_convenience" in
- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
- "") enable_ltdl_convenience=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library, and adds --enable-ltdl-install to
-# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'. Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- AC_CHECK_LIB(ltdl, main,
- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
- [if test x"$enable_ltdl_install" = xno; then
- AC_MSG_WARN([libltdl not installed, but installation disabled])
- else
- enable_ltdl_install=yes
- fi
- ])
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
- INCLTDL=
- fi
-])
-
-dnl old names
-AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
-AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
-AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
# Like AC_CONFIG_HEADER, but automatically create stamp file.
AC_DEFUN(AM_CONFIG_HEADER,
@@ -545,351 +151,6 @@ AC_CHECK_PROGS(LEX, flex lex, "$missing_dir/missing flex")
AC_PROG_LEX
AC_DECL_YYTEXT])
-# This file is derived from `gettext.m4'. The difference is that the
-# included macros assume Cygnus-style source and build trees.
-
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# This file file be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 3
-
-AC_DEFUN(CY_WITH_NLS,
- [AC_MSG_CHECKING([whether NLS is requested])
- dnl Default is enabled NLS
- AC_ARG_ENABLE(nls,
- [ --disable-nls do not use Native Language Support],
- USE_NLS=$enableval, USE_NLS=yes)
- AC_MSG_RESULT($USE_NLS)
- AC_SUBST(USE_NLS)
-
- USE_INCLUDED_LIBINTL=no
-
- dnl If we use NLS figure out what method
- if test "$USE_NLS" = "yes"; then
- AC_DEFINE(ENABLE_NLS, 1, [Define to 1 if NLS is requested])
- AC_MSG_CHECKING([whether included gettext is requested])
- AC_ARG_WITH(included-gettext,
- [ --with-included-gettext use the GNU gettext library included here],
- nls_cv_force_use_gnu_gettext=$withval,
- nls_cv_force_use_gnu_gettext=no)
- AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
-
- nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
- if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
- dnl User does not insist on using GNU NLS library. Figure out what
- dnl to use. If gettext or catgets are available (in this order) we
- dnl use this. Else we have to fall back to GNU NLS library.
- dnl catgets is only used if permitted by option --with-catgets.
- nls_cv_header_intl=
- nls_cv_header_libgt=
- CATOBJEXT=NONE
-
- AC_CHECK_HEADER(libintl.h,
- [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
- [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
- gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
-
- if test "$gt_cv_func_gettext_libc" != "yes"; then
- AC_CHECK_LIB(intl, bindtextdomain,
- [AC_CACHE_CHECK([for gettext in libintl],
- gt_cv_func_gettext_libintl,
- [AC_TRY_LINK([], [return (int) gettext ("")],
- gt_cv_func_gettext_libintl=yes,
- gt_cv_func_gettext_libintl=no)])])
- fi
-
- if test "$gt_cv_func_gettext_libc" = "yes" \
- || test "$gt_cv_func_gettext_libintl" = "yes"; then
- AC_DEFINE(HAVE_GETTEXT, 1,
- [Define as 1 if you have gettext and don't want to use GNU gettext.])
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
- if test "$MSGFMT" != "no"; then
- AC_CHECK_FUNCS(dcgettext)
- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
- AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
- return _nl_msg_cat_cntr],
- [CATOBJEXT=.gmo
- DATADIRNAME=share],
- [CATOBJEXT=.mo
- DATADIRNAME=lib])
- INSTOBJEXT=.mo
- fi
- fi
- ])
-
- dnl In the standard gettext, we would now check for catgets.
- dnl However, we never want to use catgets for our releases.
-
- if test "$CATOBJEXT" = "NONE"; then
- dnl Neither gettext nor catgets in included in the C library.
- dnl Fall back on GNU gettext library.
- nls_cv_use_gnu_gettext=yes
- fi
- fi
-
- if test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Mark actions used to generate GNU NLS library.
- INTLOBJS="\$(GETTOBJS)"
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
- AC_SUBST(MSGFMT)
- USE_INCLUDED_LIBINTL=yes
- CATOBJEXT=.gmo
- INSTOBJEXT=.mo
- DATADIRNAME=share
- INTLDEPS='$(top_builddir)/../intl/libintl.a'
- INTLLIBS=$INTLDEPS
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- nls_cv_header_intl=libintl.h
- nls_cv_header_libgt=libgettext.h
- fi
-
- dnl Test whether we really found GNU xgettext.
- if test "$XGETTEXT" != ":"; then
- dnl If it is no GNU xgettext we define it as : so that the
- dnl Makefiles still can work.
- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
- : ;
- else
- AC_MSG_RESULT(
- [found xgettext programs is not GNU xgettext; ignore it])
- XGETTEXT=":"
- fi
- fi
-
- # We need to process the po/ directory.
- POSUB=po
- else
- DATADIRNAME=share
- nls_cv_header_intl=libintl.h
- nls_cv_header_libgt=libgettext.h
- fi
-
- # If this is used in GNU gettext we have to set USE_NLS to `yes'
- # because some of the sources are only built for this goal.
- if test "$PACKAGE" = gettext; then
- USE_NLS=yes
- USE_INCLUDED_LIBINTL=yes
- fi
-
- dnl These rules are solely for the distribution goal. While doing this
- dnl we only have to keep exactly one list of the available catalogs
- dnl in configure.in.
- for lang in $ALL_LINGUAS; do
- GMOFILES="$GMOFILES $lang.gmo"
- POFILES="$POFILES $lang.po"
- done
-
- dnl Make all variables we use known to autoconf.
- AC_SUBST(USE_INCLUDED_LIBINTL)
- AC_SUBST(CATALOGS)
- AC_SUBST(CATOBJEXT)
- AC_SUBST(DATADIRNAME)
- AC_SUBST(GMOFILES)
- AC_SUBST(INSTOBJEXT)
- AC_SUBST(INTLDEPS)
- AC_SUBST(INTLLIBS)
- AC_SUBST(INTLOBJS)
- AC_SUBST(POFILES)
- AC_SUBST(POSUB)
- ])
-
-AC_DEFUN(CY_GNU_GETTEXT,
- [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
- AC_REQUIRE([AC_PROG_CC])dnl
- AC_REQUIRE([AC_PROG_RANLIB])dnl
- AC_REQUIRE([AC_ISC_POSIX])dnl
- AC_REQUIRE([AC_HEADER_STDC])dnl
- AC_REQUIRE([AC_C_CONST])dnl
- AC_REQUIRE([AC_C_INLINE])dnl
- AC_REQUIRE([AC_TYPE_OFF_T])dnl
- AC_REQUIRE([AC_TYPE_SIZE_T])dnl
- AC_REQUIRE([AC_FUNC_ALLOCA])dnl
- AC_REQUIRE([AC_FUNC_MMAP])dnl
-
- AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
-unistd.h values.h sys/param.h])
- AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
-__argz_count __argz_stringify __argz_next])
-
- if test "${ac_cv_func_stpcpy+set}" != "set"; then
- AC_CHECK_FUNCS(stpcpy)
- fi
- if test "${ac_cv_func_stpcpy}" = "yes"; then
- AC_DEFINE(HAVE_STPCPY, 1, [Define if you have the stpcpy function])
- fi
-
- AM_LC_MESSAGES
- CY_WITH_NLS
-
- if test "x$CATOBJEXT" != "x"; then
- if test "x$ALL_LINGUAS" = "x"; then
- LINGUAS=
- else
- AC_MSG_CHECKING(for catalogs to be installed)
- NEW_LINGUAS=
- for lang in ${LINGUAS=$ALL_LINGUAS}; do
- case "$ALL_LINGUAS" in
- *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
- esac
- done
- LINGUAS=$NEW_LINGUAS
- AC_MSG_RESULT($LINGUAS)
- fi
-
- dnl Construct list of names of catalog files to be constructed.
- if test -n "$LINGUAS"; then
- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
- fi
- fi
-
- dnl The reference to <locale.h> in the installed <libintl.h> file
- dnl must be resolved because we cannot expect the users of this
- dnl to define HAVE_LOCALE_H.
- if test $ac_cv_header_locale_h = yes; then
- INCLUDE_LOCALE_H="#include <locale.h>"
- else
- INCLUDE_LOCALE_H="\
-/* The system does not provide the header <locale.h>. Take care yourself. */"
- fi
- AC_SUBST(INCLUDE_LOCALE_H)
-
- dnl Determine which catalog format we have (if any is needed)
- dnl For now we know about two different formats:
- dnl Linux libc-5 and the normal X/Open format
- if test -f $srcdir/po2tbl.sed.in; then
- if test "$CATOBJEXT" = ".cat"; then
- AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
-
- dnl Transform the SED scripts while copying because some dumb SEDs
- dnl cannot handle comments.
- sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
- fi
- dnl po2tbl.sed is always needed.
- sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
- $srcdir/po2tbl.sed.in > po2tbl.sed
- fi
-
- dnl In the intl/Makefile.in we have a special dependency which makes
- dnl only sense for gettext. We comment this out for non-gettext
- dnl packages.
- if test "$PACKAGE" = "gettext"; then
- GT_NO="#NO#"
- GT_YES=
- else
- GT_NO=
- GT_YES="#YES#"
- fi
- AC_SUBST(GT_NO)
- AC_SUBST(GT_YES)
-
- MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
- AC_SUBST(MKINSTALLDIRS)
-
- dnl *** For now the libtool support in intl/Makefile is not for real.
- l=
- AC_SUBST(l)
-
- dnl Generate list of files to be processed by xgettext which will
- dnl be included in po/Makefile. But only do this if the po directory
- dnl exists in srcdir.
- if test -d $srcdir/po; then
- test -d po || mkdir po
- if test "x$srcdir" != "x."; then
- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
- posrcprefix="$srcdir/"
- else
- posrcprefix="../$srcdir/"
- fi
- else
- posrcprefix="../"
- fi
- rm -f po/POTFILES
- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
- < $srcdir/po/POTFILES.in > po/POTFILES
- fi
- ])
-
-# Search path for a program which passes the given test.
-# Ulrich Drepper <drepper@cygnus.com>, 1996.
-#
-# This file file be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 1
-
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN(AM_PATH_PROG_WITH_TEST,
-[# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL(ac_cv_path_$1,
-[case "[$]$1" in
- /*)
- ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in ifelse([$5], , $PATH, [$5]); do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if [$3]; then
- ac_cv_path_$1="$ac_dir/$ac_word"
- break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
- ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test -n "[$]$1"; then
- AC_MSG_RESULT([$]$1)
-else
- AC_MSG_RESULT(no)
-fi
-AC_SUBST($1)dnl
-])
-
-# Check whether LC_MESSAGES is available in <locale.h>.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# This file file be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 1
-
-AC_DEFUN(AM_LC_MESSAGES,
- [if test $ac_cv_header_locale_h = yes; then
- AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
- [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
- am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
- if test $am_cv_val_LC_MESSAGES = yes; then
- AC_DEFINE(HAVE_LC_MESSAGES, 1,
- [Define if your locale.h file contains LC_MESSAGES.])
- fi
- fi])
-
# Add --enable-maintainer-mode option to configure.
# From Jim Meyering