aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--gdb/doc/ChangeLog4
-rw-r--r--gdb/doc/gdb.texinfo128
2 files changed, 129 insertions, 3 deletions
diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog
index dc5f4f1..306c11f 100644
--- a/gdb/doc/ChangeLog
+++ b/gdb/doc/ChangeLog
@@ -1,3 +1,7 @@
+2006-05-03 Michael Snyder <msnyder@redhat.com>
+
+ * gdb.texinfo: Add documentation for reverse execution.
+
2006-04-27 Michael Snyder <msnyder@redhat.com>
* gdb.texinfo (delete-fork): Command renamed to "delete fork".
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index 3230dcb..500ec48 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -127,6 +127,7 @@ Copyright (C) 1988-2006 Free Software Foundation, Inc.
* Commands:: @value{GDBN} commands
* Running:: Running programs under @value{GDBN}
* Stopping:: Stopping and continuing
+* Reverse Execution:: Running programs backward
* Stack:: Examining the stack
* Source:: Examining source files
* Data:: Examining data
@@ -4325,6 +4326,111 @@ Display the current scheduler locking mode.
@end table
+@node Reverse Execution
+@chapter Running programs backward
+@cindex reverse execution
+
+When you are debugging a program, it is not unusual to realize that
+you have gone too far, and some event of interest has already happened.
+If the target environment supports it, @value{GDBN} allows you to
+``rewind'' the program by running it backward.
+
+A target environment that supports reverse execution should be able
+to ``undo'' the changes in machine state that have taken place as the
+program was executing normally. Variables, registers etc.@: should
+revert to their previous values. Obviously this requires a great
+deal of sophistication on the part of the target environment; not
+all target environments can support reverse execution.
+
+When a program is executed in reverse, the instructions that
+have most recently been executed are ``un-executed'', in reverse
+order. The program counter runs backward, following the previous
+thread of execution in reverse. As each instruction is ``un-executed'',
+the values of memory and/or registers that were changed by that
+instruction are reverted to their previous states. After executing
+a piece of source code in reverse, all side effects of that code
+should be ``undone'', and all variables should be returned to their
+prior values.
+
+Assuming you are debugging in a target environment that supports
+reverse execution, @value{GDBN} provides the following commands.
+
+@table @code
+@kindex reverse-continue
+@kindex rc @r{(@code{reverse-continue})}
+@item reverse-continue @r{[}@var{ignore-count}@r{]}
+@itemx rc @r{[}@var{ignore-count}@r{]}
+Beginning at the point where your program last stopped, start executing
+in reverse. Reverse execution will stop for breakpoints and synchronous
+exceptions (signals), just like normal execution. Behavior of
+asynchronous signals depends on the target environment.
+
+@kindex reverse-step
+@kindex rs @r{(@code{step})}
+@item reverse-step @r{[}@var{count}@r{]}
+Run the program backward until control reaches the first instruction of a
+different source line; then stop it, and return control to @value{GDBN}.
+
+Like the @code{step} command, @code{reverse-step} will only stop
+at the beginning of a source line. It ``un-executes'' the previously
+executed source line. If the previous source line included calls to
+debuggable functions, @code{reverse-step} will step (backward) into
+the called function, stopping at the beginning of the @emph{last}
+statement executed in the called function (typically a return statement).
+
+Also, as with the @code{step} command, if non-debuggable functions are
+called, @code{reverse-step} will run thru them backward without stopping.
+
+@kindex reverse-stepi
+@kindex rsi @r{(@code{reverse-stepi})}
+@item reverse-stepi @r{[}@var{count}@r{]}
+Reverse-execute one machine instruction. Note that the instruction
+to be reverse-executed is @emph{not} the one pointed to by the program
+counter, but the instruction executed prior to that one. For instance,
+if the last instruction was a jump, @code{reverse-stepi} will take you
+back from the destination of the jump to the jump instruction itself.
+
+@kindex reverse-next
+@kindex rn @r{(@code{reverse-next})}
+@item reverse-next @r{[}@var{count}@r{]}
+Run backward to the first instruction of the last line executed in
+the current (innermost) stack frame. If the line contains function
+calls, they will be ``un-executed'' without stopping. Starting from
+the first line of a function, @code{reverse-next} will take you back
+to the caller of that function, @emph{before} the function was called.
+
+@kindex reverse-nexti
+@kindex rni @r{(@code{reverse-nexti})}
+@item reverse-nexti @r{[}@var{count}@r{]}
+Like @code{nexti}, @code{reverse-nexti} executes a single instruction
+in reverse, except that called functions are ``un-executed'' atomically.
+That is, if the previously executed instruction was a return from
+another instruction, @code{reverse-nexti} will continue to execute
+in reverse until the call to that function (from the current stack
+frame) is reached.
+
+@kindex reverse-finish
+@item reverse-finish
+Just as the @code{finish} command takes you to the point where the
+current function returns, @code{reverse-finish} takes you to the point
+where it was called. Instead of ending up at the end of the current
+function invocation, you end up at the beginning.
+
+@kindex set exec-direction
+@item set exec-direction
+Set the direction of target execution.
+@itemx set exec-direction reverse
+@cindex execute forward or backward in time
+@value{GDBN} will perform all execution commands in reverse, until the
+exec-direction mode is changed to ``forward''. Affected commands include
+@code{step, stepi, next, nexti, continue, and finish}. The @code{return}
+command cannot be used in reverse mode.
+@item set exec-direction forward
+@value{GDBN} will perform all execution commands in the normal fashion.
+This is the default.
+@end table
+
+
@node Stack
@chapter Examining the Stack
@@ -22379,7 +22485,7 @@ Show the current setting of the target wait timeout.
* Register Packet Format::
* Tracepoint Packets::
* Interrupts::
-* Examples::
+* Some Examples::
* File-I/O remote protocol extension::
@end menu
@@ -22567,6 +22673,22 @@ breakpoint at @var{addr}.
Don't use this packet. Use the @samp{Z} and @samp{z} packets instead
(@pxref{insert breakpoint or watchpoint packet}).
+@item bc
+@cindex @samp{bc} packet
+Continue execution in reverse (if capable).
+@xref{Reverse Execution, ,Running programs backward}.
+
+Reply:
+@xref{Stop Reply Packets}, for the reply specifications.
+
+@item bs
+@cindex @samp{bs} packet
+Single step in reverse (if capable).
+@xref{Reverse Execution, ,Running programs backward}.
+
+Reply:
+@xref{Stop Reply Packets}, for the reply specifications.
+
@item c @r{[}@var{addr}@r{]}
@cindex @samp{c} packet
Continue. @var{addr} is address to resume. If @var{addr} is omitted,
@@ -23646,8 +23768,8 @@ Reply Packets (@pxref{Stop Reply Packets}) to @value{GDBN} as a result
of successfully stopping the program. Interrupts received while the
program is stopped will be discarded.
-@node Examples
-@section Examples
+@node Some Examples
+@section Some Examples
Example sequence of a target being re-started. Notice how the restart
does not get any direct output: