diff options
| -rw-r--r-- | gas/ChangeLog | 11 | ||||
| -rw-r--r-- | gas/config/obj-coff.c | 20 | ||||
| -rw-r--r-- | gas/config/obj-elf.c | 12 | ||||
| -rw-r--r-- | gas/config/tc-alpha.c | 10 | ||||
| -rw-r--r-- | gas/config/tc-arm.c | 90 | ||||
| -rw-r--r-- | gas/config/tc-d10v.c | 90 | ||||
| -rw-r--r-- | gas/config/tc-d30v.c | 6 | ||||
| -rw-r--r-- | gas/config/tc-h8300.c | 6 | ||||
| -rw-r--r-- | gas/config/tc-hppa.c | 26 |
9 files changed, 141 insertions, 130 deletions
diff --git a/gas/ChangeLog b/gas/ChangeLog index 097e548..657b516 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,14 @@ +2002-05-09 Kazu Hirata <kazu@cs.umass.edu> + + * config/obj-coff.c: Fix formatting. + * config/obj-elf.c: Likewise. + * config/tc-alpha.c: Likewise. + * config/tc-arm.c: Likewise. + * config/tc-d10v.c: Likewise. + * config/tc-d30v.c: Likewise. + * config/tc-h8300.c: Likewise. + * config/tc-hppa.c: Likewise. + 2002-05-09 Alan Modra <amodra@bigpond.net.au> * config/tc-i386.c (md_estimate_size_before_relax) Don't lose diff --git a/gas/config/obj-coff.c b/gas/config/obj-coff.c index c956d62..e50925c 100644 --- a/gas/config/obj-coff.c +++ b/gas/config/obj-coff.c @@ -568,7 +568,7 @@ obj_coff_loc (ignore) if (listing) { - lineno += coff_line_base - 1; + lineno += coff_line_base - 1; listing_source_line (lineno); } } @@ -716,7 +716,7 @@ obj_coff_endef (ignore) name = S_GET_NAME (def_symbol_in_progress); if (name[0] == '.' && name[2] == 'f' && name[3] == '\0') - { + { switch (name[1]) { case 'b': @@ -842,16 +842,16 @@ obj_coff_endef (ignore) || S_GET_SEGMENT (def_symbol_in_progress) == absolute_section || ! symbol_constant_p (def_symbol_in_progress) || (symbolP = symbol_find_base (S_GET_NAME (def_symbol_in_progress), - DO_NOT_STRIP)) == NULL + DO_NOT_STRIP)) == NULL || SF_GET_TAG (def_symbol_in_progress) != SF_GET_TAG (symbolP)) { /* If it already is at the end of the symbol list, do nothing */ if (def_symbol_in_progress != symbol_lastP) - { + { symbol_remove (def_symbol_in_progress, &symbol_rootP, &symbol_lastP); symbol_append (def_symbol_in_progress, symbol_lastP, &symbol_rootP, &symbol_lastP); - } + } } else { @@ -1504,13 +1504,13 @@ obj_coff_section (ignore) sections so adjust_reloc_syms in write.c will correctly handle relocs which refer to non-local symbols in these sections. */ if (strncmp (name, ".gnu.linkonce", sizeof (".gnu.linkonce") - 1) == 0) - flags |= SEC_LINK_ONCE | SEC_LINK_DUPLICATES_DISCARD; + flags |= SEC_LINK_ONCE | SEC_LINK_DUPLICATES_DISCARD; #endif if (! bfd_set_section_flags (stdoutput, sec, flags)) - as_warn (_("error setting flags for \"%s\": %s"), - bfd_section_name (stdoutput, sec), - bfd_errmsg (bfd_get_error ())); + as_warn (_("error setting flags for \"%s\": %s"), + bfd_section_name (stdoutput, sec), + bfd_errmsg (bfd_get_error ())); } else if (flags != SEC_NO_FLAGS) { @@ -1564,7 +1564,7 @@ coff_frob_section (sec) fragp = seg_info (sec)->frchainP->frch_root; last = seg_info (sec)->frchainP->frch_last; while (fragp->fr_next != last) - fragp = fragp->fr_next; + fragp = fragp->fr_next; last->fr_address = size; fragp->fr_offset += new_size - size; } diff --git a/gas/config/obj-elf.c b/gas/config/obj-elf.c index 0597eb7..8aca056 100644 --- a/gas/config/obj-elf.c +++ b/gas/config/obj-elf.c @@ -1,6 +1,6 @@ /* ELF object file format - Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 - Free Software Foundation, Inc. + Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, + 2001, 2002 Free Software Foundation, Inc. This file is part of GAS, the GNU Assembler. @@ -608,13 +608,13 @@ static struct special_section const special_sections[] = .section .init_array */ - { ".init_array",SHT_INIT_ARRAY, SHF_ALLOC + SHF_WRITE }, + { ".init_array",SHT_INIT_ARRAY, SHF_ALLOC + SHF_WRITE }, { ".fini_array",SHT_FINI_ARRAY, SHF_ALLOC + SHF_WRITE }, - { ".preinit_array",SHT_PREINIT_ARRAY, SHF_ALLOC + SHF_WRITE }, + { ".preinit_array",SHT_PREINIT_ARRAY, SHF_ALLOC + SHF_WRITE }, #else - { ".init_array",SHT_PROGBITS, SHF_ALLOC + SHF_WRITE }, + { ".init_array",SHT_PROGBITS, SHF_ALLOC + SHF_WRITE }, { ".fini_array",SHT_PROGBITS, SHF_ALLOC + SHF_WRITE }, - { ".preinit_array",SHT_PROGBITS, SHF_ALLOC + SHF_WRITE }, + { ".preinit_array",SHT_PROGBITS, SHF_ALLOC + SHF_WRITE }, #endif #ifdef ELF_TC_SPECIAL_SECTIONS diff --git a/gas/config/tc-alpha.c b/gas/config/tc-alpha.c index acb57c9..e44877d 100644 --- a/gas/config/tc-alpha.c +++ b/gas/config/tc-alpha.c @@ -1,6 +1,6 @@ /* tc-alpha.c - Processor-specific code for the DEC Alpha AXP CPU. - Copyright 1989, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 - Free Software Foundation, Inc. + Copyright 1989, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, + 2001, 2002 Free Software Foundation, Inc. Contributed by Carnegie Mellon University, 1993. Written by Alessandro Forin, based on earlier gas-1.38 target CPU files. Modified by Ken Raeburn for gas-2.x and ECOFF support. @@ -1894,7 +1894,7 @@ tokenize_arguments (str, tok, ntok) goto err; ++input_line_pointer; - SKIP_WHITESPACE (); + SKIP_WHITESPACE (); p = input_line_pointer; c = get_symbol_end (); @@ -1917,7 +1917,7 @@ tokenize_arguments (str, tok, ntok) } *input_line_pointer = c; - SKIP_WHITESPACE (); + SKIP_WHITESPACE (); if (*input_line_pointer != '!') { if (r->require_seq) @@ -2377,7 +2377,7 @@ assemble_insn (opcode, tok, ntok, insn, reloc) abort (); /* There is one special case for which an insn receives two - relocations, and thus the user-supplied reloc does not + relocations, and thus the user-supplied reloc does not override the operand reloc. */ if (operand->default_reloc == BFD_RELOC_ALPHA_HINT) { diff --git a/gas/config/tc-arm.c b/gas/config/tc-arm.c index 1370f13..f629ff4 100644 --- a/gas/config/tc-arm.c +++ b/gas/config/tc-arm.c @@ -521,7 +521,7 @@ struct vfp_reg unsigned long regno; }; -static const struct vfp_reg vfp_regs[] = +static const struct vfp_reg vfp_regs[] = { {"fpsid", 0x00000000}, {"FPSID", 0x00000000}, @@ -842,7 +842,7 @@ static void do_mav_binops_3a PARAMS ((char *)); static void do_mav_binops_3b PARAMS ((char *)); static void do_mav_binops_3c PARAMS ((char *)); static void do_mav_binops_3d PARAMS ((char *)); -static void do_mav_triple PARAMS ((char *, int, enum arm_reg_type, +static void do_mav_triple PARAMS ((char *, int, enum arm_reg_type, enum arm_reg_type, enum arm_reg_type)); static void do_mav_triple_4a PARAMS ((char *)); @@ -855,7 +855,7 @@ static void do_mav_triple_5e PARAMS ((char *)); static void do_mav_triple_5f PARAMS ((char *)); static void do_mav_triple_5g PARAMS ((char *)); static void do_mav_triple_5h PARAMS ((char *)); -static void do_mav_quad PARAMS ((char *, int, enum arm_reg_type, +static void do_mav_quad PARAMS ((char *, int, enum arm_reg_type, enum arm_reg_type, enum arm_reg_type, enum arm_reg_type)); @@ -1106,7 +1106,7 @@ static const struct asm_opcode insns[] = {"strh", 0xe00000b0, 3, ARM_EXT_V4, do_ldstv4}, /* ARM Architecture 4T. */ - /* Note: bx (and blx) are required on V5, even if the processor does + /* Note: bx (and blx) are required on V5, even if the processor does not support Thumb. */ {"bx", 0xe12fff10, 2, ARM_EXT_V4T | ARM_EXT_V5, do_bx}, @@ -2165,14 +2165,14 @@ add_to_lit_pool () break; if (literals[lit_count].exp.X_op == inst.reloc.exp.X_op - && inst.reloc.exp.X_op == O_symbol - && (literals[lit_count].exp.X_add_number + && inst.reloc.exp.X_op == O_symbol + && (literals[lit_count].exp.X_add_number == inst.reloc.exp.X_add_number) - && (literals[lit_count].exp.X_add_symbol + && (literals[lit_count].exp.X_add_symbol == inst.reloc.exp.X_add_symbol) - && (literals[lit_count].exp.X_op_symbol + && (literals[lit_count].exp.X_op_symbol == inst.reloc.exp.X_op_symbol)) - break; + break; lit_count++; } @@ -2624,9 +2624,9 @@ opcode_select (width) thumb_mode = 0; if (!need_pass_2) - frag_align (2, 0, 0); + frag_align (2, 0, 0); - record_alignment (now_seg, 1); + record_alignment (now_seg, 1); } break; @@ -3450,13 +3450,13 @@ ld_mode_required_here (string) } else /* [Rn] */ { - skip_whitespace (str); + skip_whitespace (str); - if (* str == '!') - { - str ++; - inst.instruction |= WRITE_BACK; - } + if (* str == '!') + { + str ++; + inst.instruction |= WRITE_BACK; + } inst.instruction |= INDEX_UP | HWOFFSET_IMM; pre_inc = 1; @@ -4027,10 +4027,10 @@ do_blx (str) { /* This must be is BLX <target address>, no condition allowed. */ if (inst.instruction != COND_ALWAYS) - { - inst.error = BAD_COND; + { + inst.error = BAD_COND; return; - } + } inst.instruction = 0xfafffffe; @@ -4088,7 +4088,7 @@ do_t_blx (str) BKPT <16 bit unsigned immediate> Instruction is not conditional. The bit pattern given in insns[] has the COND_ALWAYS condition, - and it is an error if the caller tried to override that. */ + and it is an error if the caller tried to override that. */ static void do_bkpt (str) @@ -4331,7 +4331,7 @@ do_ldrd (str) || (rn = ld_mode_required_here (& str)) == FAIL) { if (!inst.error) - inst.error = BAD_ARGS; + inst.error = BAD_ARGS; return; } @@ -4514,7 +4514,7 @@ my_get_expression (ep, str) return 0; } -/* We handle all bad expressions here, so that we can report the faulty +/* We handle all bad expressions here, so that we can report the faulty instruction in the error message. */ void md_operand (expr) @@ -5543,7 +5543,7 @@ do_ldstv4 (str) end_of_line (str); return; } - + value = validate_immediate (~ inst.reloc.exp.X_add_number); if (value != FAIL) @@ -6729,7 +6729,7 @@ vfp_psr_parse (str) /* Mark it. */ *--p = 0; - for (vreg = vfp_regs + 0; + for (vreg = vfp_regs + 0; vreg < vfp_regs + sizeof (vfp_regs) / sizeof (struct vfp_reg); vreg++) { @@ -7929,11 +7929,11 @@ mav_reg_required_here (str, shift, regtype) /* Restore the start point. */ *str = start; - + /* In the few cases where we might be able to accept something else this error can be overridden. */ inst.error = _(all_reg_maps[regtype].expected); - + return FAIL; } @@ -8181,7 +8181,7 @@ do_mav_quad_6b (str) REG_TYPE_MVFX); } -/* cfmvsc32<cond> DSPSC,MVFX[15:0]. */ +/* cfmvsc32<cond> DSPSC,MVFX[15:0]. */ static void do_mav_dspsc_1 (str) char * str; @@ -9095,7 +9095,7 @@ create_register_alias (newname, p) *p = c; return 0; } - + static void set_constant_flonums () { @@ -10487,7 +10487,7 @@ md_assemble (str) /* md_parse_option Invocation line includes a switch not recognized by the base assembler. - See if it's a processor-specific option. + See if it's a processor-specific option. This routine is somewhat complicated by the need for backwards compatibility (since older releases of gcc can't be changed). @@ -10505,7 +10505,7 @@ md_assemble (str) -mthumb Start in Thumb mode -mthumb-interwork Code supports ARM/Thumb interworking - For now we will also provide support for + For now we will also provide support for -mapcs-32 32-bit Program counter -mapcs-26 26-bit Program counter @@ -10581,7 +10581,7 @@ struct arm_option_table char *deprecated; /* If non-null, print this message. */ }; -struct arm_option_table arm_opts[] = +struct arm_option_table arm_opts[] = { {"k", N_("generate PIC code"), &pic_code, 1, NULL}, {"mthumb", N_("assemble Thumb code"), &thumb_mode, 1, NULL}, @@ -10789,7 +10789,7 @@ static struct arm_cpu_option_table arm_cpus[] = {"ep9312", ARM_ARCH_V4T | ARM_CEXT_MAVERICK, FPU_NONE}, {NULL, 0, 0} }; - + struct arm_arch_option_table { char *name; @@ -11046,7 +11046,7 @@ md_parse_option (c, arg) #endif case 'a': - /* Listing option. Just ignore these, we don't support additional + /* Listing option. Just ignore these, we don't support additional ones. */ return 0; @@ -11073,10 +11073,10 @@ md_parse_option (c, arg) for (lopt = arm_long_opts; lopt->option != NULL; lopt++) { - /* These options are expected to have an argument. */ + /* These options are expected to have an argument. */ if (c == lopt->option[0] && arg != NULL - && strncmp (arg, lopt->option + 1, + && strncmp (arg, lopt->option + 1, strlen (lopt->option + 1)) == 0) { #if WARN_DEPRECATED @@ -11248,7 +11248,7 @@ arm_frob_label (sym) lsl r3, r3, #2 ldr r2, [r3, r2] mov pc, r2 - + .Lbbb: .word .Lxxx .Lccc: .word .Lyyy ..etc... @@ -11258,7 +11258,7 @@ arm_frob_label (sym) The second instruction converts a table index into a byte offset. The third instruction gets the jump address out of the table. The fourth instruction performs the jump. - + If the address stored at .Laaa is that of a symbol which has the Thumb_Func bit set, then the linker will arrange for this address to have the bottom bit set, which in turn would mean that the @@ -11307,7 +11307,7 @@ arm_adjust_symtab () as_bad (_("%s: unexpected function type: %d"), S_GET_NAME (sym), S_GET_STORAGE_CLASS (sym)); } - else switch (S_GET_STORAGE_CLASS (sym)) + else switch (S_GET_STORAGE_CLASS (sym)) { case C_EXT: S_SET_STORAGE_CLASS (sym, C_THUMBEXT); @@ -11609,17 +11609,17 @@ arm_handle_align (fragP) int bytes, fix, noop_size; char * p; const char * noop; - + if (fragP->fr_type != rs_align_code) return; bytes = fragP->fr_next->fr_address - fragP->fr_address - fragP->fr_fix; p = fragP->fr_literal + fragP->fr_fix; fix = 0; - + if (bytes > MAX_MEM_FOR_RS_ALIGN_CODE) bytes &= MAX_MEM_FOR_RS_ALIGN_CODE; - + if (fragP->tc_frag_data) { if (target_big_endian) @@ -11636,7 +11636,7 @@ arm_handle_align (fragP) noop = arm_noop; noop_size = sizeof (arm_noop); } - + if (bytes & (noop_size - 1)) { fix = bytes & (noop_size - 1); @@ -11652,7 +11652,7 @@ arm_handle_align (fragP) bytes -= noop_size; fix += noop_size; } - + fragP->fr_fix += fix; fragP->fr_var = noop_size; } @@ -11671,7 +11671,7 @@ arm_frag_align_code (n, max) to support alignments greater than 32 bytes. */ if (max > MAX_MEM_FOR_RS_ALIGN_CODE) as_fatal (_("alignments greater than 32 bytes not supported in .text sections.")); - + p = frag_var (rs_align_code, MAX_MEM_FOR_RS_ALIGN_CODE, 1, diff --git a/gas/config/tc-d10v.c b/gas/config/tc-d10v.c index 73d8e43..6b53409 100644 --- a/gas/config/tc-d10v.c +++ b/gas/config/tc-d10v.c @@ -99,9 +99,9 @@ static int parallel_ok PARAMS ((struct d10v_opcode *opcode1, unsigned long insn1 struct d10v_opcode *opcode2, unsigned long insn2, packing_type exec_type)); -static void check_resource_conflict PARAMS ((struct d10v_opcode *opcode1, - unsigned long insn1, - struct d10v_opcode *opcode2, +static void check_resource_conflict PARAMS ((struct d10v_opcode *opcode1, + unsigned long insn1, + struct d10v_opcode *opcode2, unsigned long insn2)); static symbolS * find_symbol_matching_register PARAMS ((expressionS *)); @@ -670,8 +670,8 @@ build_insn (opcode, opers, insn) insn = insn | (number << shift); } - /* kludge: for DIVS, we need to put the operands in twice on the second - pass, format is changed to LONG_R to force the second set of operands + /* kludge: for DIVS, we need to put the operands in twice on the second + pass, format is changed to LONG_R to force the second set of operands to not be shifted over 15. */ if ((opcode->opcode == OPCODE_DIVS) && (format == LONG_L)) insn = build_insn (opcode, opers, insn); @@ -728,8 +728,8 @@ write_1_short (opcode, insn, fx) if (opcode->exec_type & PARONLY) as_fatal (_("Instruction must be executed in parallel with another instruction.")); - /* The other container needs to be NOP. - According to 4.3.1: for FM=00, sub-instructions performed only by IU + /* The other container needs to be NOP. + According to 4.3.1: for FM=00, sub-instructions performed only by IU cannot be encoded in L-container. */ if (opcode->unit == IU) insn |= FM00 | (NOP << 15); /* Right container. */ @@ -944,7 +944,7 @@ parallel_ok (op1, insn1, op2, insn2, exec_type) /* If this is auto parallization, and either instruction is a branch, don't parallel. */ if (exec_type == PACK_UNSPEC - && (op1->exec_type & (ALONE | BRANCH) + && (op1->exec_type & (ALONE | BRANCH) || op2->exec_type & (ALONE | BRANCH))) return 0; @@ -963,8 +963,8 @@ parallel_ok (op1, insn1, op2, insn2, exec_type) and the second reads the PSW (which includes C, F0, and F1), then they cannot operate safely in parallel. */ - /* The bitmasks (mod and used) look like this (bit 31 = MSB). - r0-r15 0-15 + /* The bitmasks (mod and used) look like this (bit 31 = MSB). + r0-r15 0-15 a0-a1 16-17 cr (not psw) 18 psw 19 @@ -1051,7 +1051,7 @@ parallel_ok (op1, insn1, op2, insn2, exec_type) /* Determine if there are any resource conflicts among two manually parallelized instructions. Some of this was lifted from parallel_ok. */ -static void +static void check_resource_conflict (op1, insn1, op2, insn2) struct d10v_opcode *op1, *op2; unsigned long insn1, insn2; @@ -1127,35 +1127,35 @@ check_resource_conflict (op1, insn1, op2, insn2) if (flags & (OPERAND_ACC0 | OPERAND_ACC1)) regno += 16; else if (flags & OPERAND_CONTROL) /* mvtc or mvfc */ - { + { if (regno == 0) regno = 19; else - regno = 18; + regno = 18; } else if (flags & OPERAND_FFLAG) regno = 22; else if (flags & OPERAND_CFLAG) regno = 21; - - if ( flags & OPERAND_DEST ) + + if ( flags & OPERAND_DEST ) { mod[j] |= 1 << regno; if (flags & OPERAND_EVEN) mod[j] |= 1 << (regno + 1); } - else - { - used[j] |= 1 << regno ; - if (flags & OPERAND_EVEN) - used[j] |= 1 << (regno + 1); - - /* Auto inc/dec also modifies the register. */ - if (op->operands[i+1] != 0 - && (d10v_operands[op->operands[i+1]].flags - & (OPERAND_PLUS | OPERAND_MINUS)) != 0) - mod[j] |= 1 << regno; - } + else + { + used[j] |= 1 << regno ; + if (flags & OPERAND_EVEN) + used[j] |= 1 << (regno + 1); + + /* Auto inc/dec also modifies the register. */ + if (op->operands[i+1] != 0 + && (d10v_operands[op->operands[i+1]].flags + & (OPERAND_PLUS | OPERAND_MINUS)) != 0) + mod[j] |= 1 << regno; + } } else if (flags & OPERAND_ATMINUS) { @@ -1294,7 +1294,7 @@ md_assemble (str) d10v_cleanup (); if (prev_opcode - && (0 == write_2_short (prev_opcode, prev_insn, opcode, insn, extype, + && (0 == write_2_short (prev_opcode, prev_insn, opcode, insn, extype, fixups))) { /* No instructions saved. */ @@ -1520,7 +1520,7 @@ find_opcode (opcode, myops) } match = 0; - + /* Now search the opcode table table for one with operands that matches what we've got. */ while (!match) @@ -1562,19 +1562,19 @@ find_opcode (opcode, myops) break; } - /* Unfortunatly, for the indirect operand in instructions such - as ``ldb r1, @(c,r14)'' this function can be passed - X_op == O_register (because 'c' is a valid register name). - However we cannot just ignore the case when X_op == O_register - but flags & OPERAND_REG is null, so we check to see if a symbol - of the same name as the register exists. If the symbol does - exist, then the parser was unable to distinguish the two cases + /* Unfortunatly, for the indirect operand in instructions such + as ``ldb r1, @(c,r14)'' this function can be passed + X_op == O_register (because 'c' is a valid register name). + However we cannot just ignore the case when X_op == O_register + but flags & OPERAND_REG is null, so we check to see if a symbol + of the same name as the register exists. If the symbol does + exist, then the parser was unable to distinguish the two cases and we fix things here. (Ref: PR14826) */ if (!(flags & OPERAND_REG) && (X_op == O_register)) { symbolS * sym; - + sym = find_symbol_matching_register (& myops[i]); if (sym != NULL) @@ -1672,9 +1672,9 @@ tc_gen_reloc (seg, fixp) if (fixp->fx_r_type == BFD_RELOC_VTABLE_INHERIT || fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY) reloc->address = fixp->fx_offset; - + reloc->addend = fixp->fx_addnumber; - + return reloc; } @@ -1769,13 +1769,13 @@ md_apply_fix3 (fixP, valP, seg) XXX - Do we have to worry about branches to a symbol + offset ? */ if (fixP->fx_addsy != NULL && S_IS_EXTERN (fixP->fx_addsy) ) - { - segT fseg = S_GET_SEGMENT (fixP->fx_addsy); - segment_info_type *segf = seg_info(fseg); + { + segT fseg = S_GET_SEGMENT (fixP->fx_addsy); + segment_info_type *segf = seg_info(fseg); if ( segf && segf->sym != fixP->fx_addsy) value = 0; - } + } /* Drop through. */ case BFD_RELOC_D10V_18: /* Instruction addresses are always right-shifted by 2. */ @@ -1789,9 +1789,9 @@ md_apply_fix3 (fixP, valP, seg) rep = (struct d10v_opcode *) hash_find (d10v_hash, "rep"); repi = (struct d10v_opcode *) hash_find (d10v_hash, "repi"); if ((insn & FM11) == FM11 - && ((repi != NULL + && ((repi != NULL && (insn & repi->mask) == (unsigned) repi->opcode) - || (rep != NULL + || (rep != NULL && (insn & rep->mask) == (unsigned) rep->opcode)) && value < 4) as_fatal diff --git a/gas/config/tc-d30v.c b/gas/config/tc-d30v.c index c92bcdd..b0b058f 100644 --- a/gas/config/tc-d30v.c +++ b/gas/config/tc-d30v.c @@ -1,5 +1,5 @@ /* tc-d30v.c -- Assembler code for the Mitsubishi D30V - Copyright 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. + Copyright 1997, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. This file is part of GAS, the GNU Assembler. @@ -246,7 +246,7 @@ check_range (num, bits, flags) if (bits == 32) { if (sizeof (unsigned long) * CHAR_BIT == 32) - return 0; + return 0; /* We don't record signed or unsigned for 32-bit quantities. Allow either. */ @@ -1211,7 +1211,7 @@ parallel_ok (op1, insn1, op2, insn2, exec_type) return 0; } else - if ((mod_reg[0][j] & (mod_reg[1][j] | used_reg[1][j])) != 0) + if ((mod_reg[0][j] & (mod_reg[1][j] | used_reg[1][j])) != 0) return 0; } diff --git a/gas/config/tc-h8300.c b/gas/config/tc-h8300.c index 940e6d6..5f973d7 100644 --- a/gas/config/tc-h8300.c +++ b/gas/config/tc-h8300.c @@ -1,6 +1,6 @@ /* tc-h8300.c -- Assemble code for the Hitachi H8/300 - Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 2000, 2001 - Free Software Foundation, Inc. + Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 2000, + 2001, 2002 Free Software Foundation, Inc. This file is part of GAS, the GNU Assembler. @@ -1491,7 +1491,7 @@ md_section_align (seg, size) valueT size; { return ((size + (1 << section_alignment[(int) seg]) - 1) - & (-1 << section_alignment[(int) seg])); + & (-1 << section_alignment[(int) seg])); } #endif diff --git a/gas/config/tc-hppa.c b/gas/config/tc-hppa.c index 946831a..9db438f 100644 --- a/gas/config/tc-hppa.c +++ b/gas/config/tc-hppa.c @@ -1289,10 +1289,10 @@ pa_undefine_label () { if (1 #ifdef OBJ_SOM - && current_space == label_chain->lss_space && label_chain->lss_label + && current_space == label_chain->lss_space && label_chain->lss_label #endif #ifdef OBJ_ELF - && now_seg == label_chain->lss_segment && label_chain->lss_label + && now_seg == label_chain->lss_segment && label_chain->lss_label #endif ) { @@ -2334,16 +2334,16 @@ pa_ip (str) args++; switch (*args) { - /* Handle FP compare conditions. */ - case 'f': - cond = pa_parse_fp_cmp_cond (&s); - INSERT_FIELD_AND_CONTINUE (opcode, cond, 0); + /* Handle FP compare conditions. */ + case 'f': + cond = pa_parse_fp_cmp_cond (&s); + INSERT_FIELD_AND_CONTINUE (opcode, cond, 0); /* Handle an add condition. */ case 'A': case 'a': - cmpltr = 0; - flag = 0; + cmpltr = 0; + flag = 0; if (*s == ',') { s++; @@ -4240,8 +4240,8 @@ tc_gen_reloc (section, fixp) case R_N0SEL: case R_N1SEL: /* There is no symbol or addend associated with these fixups. */ - relocs[i]->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *)); - *relocs[i]->sym_ptr_ptr = symbol_get_bfdsym (dummy_symbol); + relocs[i]->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *)); + *relocs[i]->sym_ptr_ptr = symbol_get_bfdsym (dummy_symbol); relocs[i]->addend = 0; break; @@ -4249,8 +4249,8 @@ tc_gen_reloc (section, fixp) case R_ENTRY: case R_EXIT: /* There is no symbol associated with these fixups. */ - relocs[i]->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *)); - *relocs[i]->sym_ptr_ptr = symbol_get_bfdsym (dummy_symbol); + relocs[i]->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *)); + *relocs[i]->sym_ptr_ptr = symbol_get_bfdsym (dummy_symbol); relocs[i]->addend = fixp->fx_offset; break; @@ -5227,7 +5227,7 @@ pa_get_absolute_expression (insn, strp) input_line_pointer = *strp; s = *strp; while (*s != ',' && *s != ' ' && *s != '\t') - s++; + s++; c = *s; *s = 0; |