diff options
| -rw-r--r-- | gdb/doc/ChangeLog | 5 | ||||
| -rw-r--r-- | gdb/doc/gdb.texinfo | 4 | ||||
| -rw-r--r-- | gdb/testsuite/ChangeLog | 21 | ||||
| -rw-r--r-- | gdb/testsuite/gdb.base/a2-run.exp | 4 | ||||
| -rw-r--r-- | gdb/testsuite/gdb.base/bitfields.exp | 22 | ||||
| -rw-r--r-- | gdb/testsuite/gdb.base/break.exp | 3 | ||||
| -rw-r--r-- | gdb/testsuite/gdb.base/chng-syms.exp | 7 | ||||
| -rw-r--r-- | gdb/testsuite/gdb.base/default.exp | 10 | ||||
| -rw-r--r-- | gdb/testsuite/gdb.base/funcargs.exp | 30 | ||||
| -rw-r--r-- | gdb/testsuite/gdb.base/opaque.exp | 10 | ||||
| -rw-r--r-- | gdb/testsuite/gdb.base/ptype.exp | 6 | ||||
| -rw-r--r-- | gdb/testsuite/gdb.base/scope.exp | 28 | ||||
| -rw-r--r-- | gdb/testsuite/gdb.base/sepdebug.exp | 3 | ||||
| -rw-r--r-- | gdb/testsuite/gdb.base/watchpoint.exp | 44 |
14 files changed, 34 insertions, 163 deletions
diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog index e2488e7..0aac7d2 100644 --- a/gdb/doc/ChangeLog +++ b/gdb/doc/ChangeLog @@ -1,3 +1,8 @@ +2012-02-13 Pedro Alves <palves@redhat.com> + + * gdb.texinfo (MIPS boards): Refer to mips-elf instead of + mips-idt-ecoff. + 2012-02-09 Yao Qi <yao@codesourcery.com> * gdb.texinfo (Symbols In Python): Add missing `@end defvar'. diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo index 4f863dd..9edc6ad 100644 --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -19190,7 +19190,7 @@ Show MicroBlaze-specific debugging level. @cindex MIPS boards @value{GDBN} can use the MIPS remote debugging protocol to talk to a MIPS board attached to a serial line. This is available when -you configure @value{GDBN} with @samp{--target=mips-idt-ecoff}. +you configure @value{GDBN} with @samp{--target=mips-elf}. @need 1000 Use these @value{GDBN} commands to specify the connection to your target board: @@ -19295,7 +19295,7 @@ waiting for an acknowledgment of a packet with the @code{set retransmit-timeout @var{seconds}} command. The default is 3 seconds. You can inspect both values with @code{show timeout} and @code{show retransmit-timeout}. (These commands are @emph{only} available when -@value{GDBN} is configured for @samp{--target=mips-idt-ecoff}.) +@value{GDBN} is configured for @samp{--target=mips-elf}.) The timeout set by @code{set timeout} does not apply when @value{GDBN} is waiting for your program to stop. In that case, @value{GDBN} waits diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 4de1457..35b1df5 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,24 @@ +2012-02-13 Pedro Alves <palves@redhat.com> + + * config/mips-idt.exp: Delete. + * gdb.base/a2-run.exp: Remove mips-idt xfails. + * gdb.base/bitfields.exp: Remove mips-idt restarts. + * gdb.base/break.exp: Remove mips-idt references. + * gdb.base/chng-syms.exp: Ditto. + * gdb.base/default.exp: Ditto. + * gdb.base/funcargs.exp (funcargs_reload): Delete. + (top level): Don't call it. + * gdb.base/opaque.exp: Remove mips-idt restarts. + * gdb.base/ptype.exp: Remove mips-idt xfails. + * gdb.base/scope.exp: Remove mips-idt restarts. + * gdb.base/sepdebug.exp: Remove mips-idt references. + * gdb.base/watchpoint.exp (maybe_clean_restart) + (maybe_reinitialize): Delete. + (test_disabling_watchpoints, test_disabling_watchpoints) + (test_watchpoint_triggered_in_syscall) + (test_watchpoint_and_breakpoint, test_inaccessible_watchpoint): + Don't call them. + 2012-02-12 Jan Kratochvil <jan.kratochvil@redhat.com> * gdb.server/server-exec-info.exp: New file. diff --git a/gdb/testsuite/gdb.base/a2-run.exp b/gdb/testsuite/gdb.base/a2-run.exp index 4e3b54b..e2119d4 100644 --- a/gdb/testsuite/gdb.base/a2-run.exp +++ b/gdb/testsuite/gdb.base/a2-run.exp @@ -107,7 +107,7 @@ if [istarget "*-*-vxworks*"] then { verbose "Timeout is now $timeout seconds" 2 gdb_expect -re "$gdb_prompt $" {} } else { - setup_xfail "mips-idt-*" "arm-*-coff" + setup_xfail "arm-*-coff" gdb_run_cmd 5 gdb_expect { -re ".*120.*$gdb_prompt $"\ @@ -118,7 +118,6 @@ if [istarget "*-*-vxworks*"] then { } # Run again with same arguments. -setup_xfail "mips-idt-*" gdb_run_cmd if [istarget "*-*-vxworks*"] then { @@ -185,7 +184,6 @@ if [istarget "*-*-vxworks*"] then { } # Use "set args" command to specify an argument and run again. -setup_xfail "mips-idt-*" if [istarget "*-*-vxworks*"] then { gdb_test_no_output "set args vxmain \"6\"" } else { diff --git a/gdb/testsuite/gdb.base/bitfields.exp b/gdb/testsuite/gdb.base/bitfields.exp index 3098ffd..f5777d6 100644 --- a/gdb/testsuite/gdb.base/bitfields.exp +++ b/gdb/testsuite/gdb.base/bitfields.exp @@ -253,29 +253,7 @@ gdb_load ${binfile} gdb_test_no_output "set print sevenbit-strings" bitfield_uniqueness -if [istarget "mips-idt-*"] then { - # Restart because IDT/SIM runs out of file descriptors. - gdb_exit - gdb_start - gdb_reinitialize_dir $srcdir/$subdir - gdb_load ${binfile} -} bitfield_containment -if [istarget "mips-idt-*"] then { - # Restart because IDT/SIM runs out of file descriptors. - gdb_exit - gdb_start - gdb_reinitialize_dir $srcdir/$subdir - gdb_load ${binfile} -} bitfield_unsignedness -if [istarget "mips-idt-*"] then { - # Restart because IDT/SIM runs out of file descriptors. - gdb_exit - gdb_start - gdb_reinitialize_dir $srcdir/$subdir - gdb_load ${binfile} -} bitfield_signedness - bitfield_at_offset diff --git a/gdb/testsuite/gdb.base/break.exp b/gdb/testsuite/gdb.base/break.exp index 9e63e2a..54cbae1 100644 --- a/gdb/testsuite/gdb.base/break.exp +++ b/gdb/testsuite/gdb.base/break.exp @@ -355,9 +355,6 @@ gdb_test "disable \$1foo" \ # handle arguments. # Huh? There doesn't *appear* to be anything that passes arguments # below. -if [istarget "mips-idt-*"] then { - return -} # # run until the breakpoint at main is hit. For non-stubs-using targets. diff --git a/gdb/testsuite/gdb.base/chng-syms.exp b/gdb/testsuite/gdb.base/chng-syms.exp index ec5b4c8..9c20a44 100644 --- a/gdb/testsuite/gdb.base/chng-syms.exp +++ b/gdb/testsuite/gdb.base/chng-syms.exp @@ -18,13 +18,6 @@ # Test that GDB cleans up properly after errors that result when a # breakpoint is reset. - -# IDT/SIM apparently doesn't have enough file descriptors to allow the -# problem checked by this test to occur. -if [istarget "mips-idt-*"] { - return 0; -} - set testfile "chng-syms" set srcfile ${testfile}.c set binfile ${objdir}/${subdir}/${testfile} diff --git a/gdb/testsuite/gdb.base/default.exp b/gdb/testsuite/gdb.base/default.exp index 13cb1ea..89426c2 100644 --- a/gdb/testsuite/gdb.base/default.exp +++ b/gdb/testsuite/gdb.base/default.exp @@ -39,7 +39,6 @@ gdb_test "append binary memory" "Missing filename\." gdb_test "append binary value" "Missing filename\." if !$use_gdb_stub { - setup_xfail "mips-idt-*" gdb_test_multiple "attach" "attach" { -re "Argument required .(process-id|program) to attach.*$gdb_prompt $"\ { pass "attach" } @@ -61,7 +60,6 @@ if !$use_gdb_stub { } - setup_xfail "mips-idt-*" gdb_test "backtrace" "No stack." # ba and bac are no longer unique command prefixes. So these tests @@ -69,18 +67,14 @@ if !$use_gdb_stub { # GDB needs to be fixed to map unique alias here for ba bac. # foreach i "bt ba bac" { - setup_xfail "mips-idt-*" gdb_test $i "No stack." "backtrace \"$i\" abbreviation" } } else { warning "Skipping backtrace and break tests because of GDB stub." } -# This works on the MIPS IDT board, but confuses future tests. -if ![istarget "mips-idt-*"] then { - gdb_test "continue" "The program is not being run." "continue" - gdb_test "c" "The program is not being run." "continue \"c\" abbreviation" -} +gdb_test "continue" "The program is not being run." "continue" +gdb_test "c" "The program is not being run." "continue \"c\" abbreviation" #test call gdb_test "call" "The history is empty..*" "call" diff --git a/gdb/testsuite/gdb.base/funcargs.exp b/gdb/testsuite/gdb.base/funcargs.exp index 0b5534a..92161d7 100644 --- a/gdb/testsuite/gdb.base/funcargs.exp +++ b/gdb/testsuite/gdb.base/funcargs.exp @@ -965,21 +965,6 @@ proc recursive_structs_by_value {} { gdb_stop_suppressing_tests; } -proc funcargs_reload { } { - global objdir - global subdir - global binfile - global srcdir - - if [istarget "mips-idt-*"] { - # Restart because IDT/SIM runs out of file descriptors. - gdb_exit - gdb_start - gdb_reinitialize_dir $srcdir/$subdir - gdb_load ${binfile} - } -} - # # Test for accessing local stack variables in functions which call alloca # @@ -1234,46 +1219,31 @@ gdb_test_multiple "show endian" "getting target endian" { gdb_test_no_output "set print frame-arguments all" integral_args -funcargs_reload unsigned_integral_args -funcargs_reload if {![target_info exists gdb,skip_float_tests]} { float_and_integral_args } # Test _Complex type here if supported. if [support_complex_tests] { - funcargs_reload complex_args - funcargs_reload complex_integral_args if {![target_info exists gdb,skip_float_tests]} { - funcargs_reload complex_float_integral_args } } -funcargs_reload pointer_args -funcargs_reload structs_by_reference -funcargs_reload structs_by_value -funcargs_reload discard_and_shuffle -funcargs_reload shuffle_round_robin -funcargs_reload recursive_structs_by_value -funcargs_reload localvars_after_alloca -funcargs_reload call_after_alloca -funcargs_reload localvars_in_indirect_call -funcargs_reload test_stepping_over_trampolines set timeout $prev_timeout diff --git a/gdb/testsuite/gdb.base/opaque.exp b/gdb/testsuite/gdb.base/opaque.exp index b7ad265..f5fef76 100644 --- a/gdb/testsuite/gdb.base/opaque.exp +++ b/gdb/testsuite/gdb.base/opaque.exp @@ -134,11 +134,6 @@ gdb_test "ptype struct foo" \ # have learned during the static tests. # -if [istarget "mips-idt-*"] then { - # Restart because IDT/SIM runs out of file descriptors. - gdb_exit - gdb_start -} gdb_reinitialize_dir $srcdir/$subdir gdb_load ${binfile} @@ -189,11 +184,6 @@ gdb_test "ptype struct foo" \ # Now reload the symbols again so we forget about anything we might # have learned reading the symbols during the previous tests. -if [istarget "mips-idt-*"] then { - # Restart because IDT/SIM runs out of file descriptors. - gdb_exit - gdb_start -} gdb_reinitialize_dir $srcdir/$subdir gdb_load ${binfile} diff --git a/gdb/testsuite/gdb.base/ptype.exp b/gdb/testsuite/gdb.base/ptype.exp index adb4cd4..51a3014 100644 --- a/gdb/testsuite/gdb.base/ptype.exp +++ b/gdb/testsuite/gdb.base/ptype.exp @@ -169,7 +169,7 @@ gdb_test "ptype red" "type = enum \{red, green, blue\}.*" "ptype unnamed enumera # acts like whatis for basic types. If it is thought to be necessary to # test both whatis and ptype for all the types, the tests should be # merged into whatis.exp, or else maintenance will be a royal pain -kingdon -#setup_xfail "mips-idt-*" "mips-sgi-*" +#setup_xfail "mips-sgi-*" #send "ptype v_char\n" #gdb_expect { # -re "type = char.*$gdb_prompt $" { pass "ptype char" } @@ -273,7 +273,7 @@ gdb_test "ptype v_int" "type = int.*" "ptype int" # # test ptype command with arrays # -#setup_xfail "mips-idt-*" "mips-sgi-*" +#setup_xfail "mips-sgi-*" #send "ptype v_char_array\n" #gdb_expect { # -re "type = char .2..*$gdb_prompt $" { pass "ptype char array" } @@ -374,7 +374,7 @@ gdb_test "ptype t_char_array" "type = (|unsigned )char \\\[0?\\\]" ## ## test ptype command with pointers ## -#setup_xfail "mips-idt-*" "mips-sgi-*" +#setup_xfail "mips-sgi-*" #send "ptype v_char_pointer\n" #gdb_expect { # -re "type = char \*.*$gdb_prompt $" { pass "ptype char pointer" } diff --git a/gdb/testsuite/gdb.base/scope.exp b/gdb/testsuite/gdb.base/scope.exp index a86e02d..8db7096 100644 --- a/gdb/testsuite/gdb.base/scope.exp +++ b/gdb/testsuite/gdb.base/scope.exp @@ -552,37 +552,9 @@ gdb_test "print 'scope0.c'::filelocal" "= 1" \ "print 'scope0.c'::filelocal before run" if [runto_main] then { test_at_main } -if [istarget "mips-idt-*"] then { - # Restart because IDT/SIM runs out of file descriptors. - gdb_exit - gdb_start - gdb_reinitialize_dir $srcdir/$subdir - gdb_load ${binfile} -} if [runto foo] then { test_at_foo } -if [istarget "mips-idt-*"] then { - # Restart because IDT/SIM runs out of file descriptors. - gdb_exit - gdb_start - gdb_reinitialize_dir $srcdir/$subdir - gdb_load ${binfile} -} if [runto bar] then { test_at_bar } -if [istarget "mips-idt-*"] then { - # Restart because IDT/SIM runs out of file descriptors. - gdb_exit - gdb_start - gdb_reinitialize_dir $srcdir/$subdir - gdb_load ${binfile} -} if [runto localscopes] then { test_at_localscopes } -if [istarget "mips-idt-*"] then { - # Restart because IDT/SIM runs out of file descriptors. - gdb_exit - gdb_start - gdb_reinitialize_dir $srcdir/$subdir - gdb_load ${binfile} -} if [runto autovars] then { test_at_autovars } if [istarget "*-*-vxworks*"] { diff --git a/gdb/testsuite/gdb.base/sepdebug.exp b/gdb/testsuite/gdb.base/sepdebug.exp index ba10478..4010d33 100644 --- a/gdb/testsuite/gdb.base/sepdebug.exp +++ b/gdb/testsuite/gdb.base/sepdebug.exp @@ -175,9 +175,6 @@ gdb_test "info break" \ # handle arguments. # Huh? There doesn't *appear* to be anything that passes arguments # below. -if [istarget "mips-idt-*"] then { - return -} # # run until the breakpoint at main is hit. For non-stubs-using targets. diff --git a/gdb/testsuite/gdb.base/watchpoint.exp b/gdb/testsuite/gdb.base/watchpoint.exp index 5070914..381c26e 100644 --- a/gdb/testsuite/gdb.base/watchpoint.exp +++ b/gdb/testsuite/gdb.base/watchpoint.exp @@ -92,40 +92,6 @@ proc initialize {} { return 1 } -proc maybe_clean_restart { } { - # The IDT/sim monitor only has 8 (!) open files, of which it uses - # 4 (!). So we have to make sure one program exits before - # starting another one. - if [istarget "mips-idt-*"] then { - global testfile - global no_hw - - clean_restart $testfile - - if {$no_hw} { - gdb_test_no_output "set can-use-hw-watchpoints 0" "" - } - } -} - -proc maybe_reinitialize { } { - # The IDT/sim monitor only has 8 (!) open files, of which it uses - # 4 (!). So we have to make sure one program exits before - # starting another one. - if [istarget "mips-idt-*"] then { - global testfile - global no_hw - - clean_restart $testfile - - if {$no_hw} { - gdb_test_no_output "set can-use-hw-watchpoints 0" "" - } - - initialize - } -} - # # Test simple watchpoint. # @@ -246,8 +212,6 @@ proc test_disabling_watchpoints {} { global decimal global hex - maybe_reinitialize - gdb_test "info watch" "\[0-9]+\[ \]*.*watchpoint.*ival3.*" "watchpoints found in watchpoint/breakpoint table" # Ensure that the watchpoint is disabled when we startup. @@ -312,8 +276,6 @@ proc test_disabling_watchpoints {} { proc test_stepping {} { global gdb_prompt - maybe_clean_restart - if [runto marker1] then { gdb_test "watch ival2" ".*\[Ww\]atchpoint \[0-9\]*: ival2" @@ -473,8 +435,6 @@ proc test_watchpoint_triggered_in_syscall {} { proc test_complex_watchpoint {} { global gdb_prompt - maybe_clean_restart - if [runto marker4] then { gdb_test "watch ptr1->val" ".*\[Ww\]atchpoint \[0-9\]*: ptr1->val" gdb_test "break marker5" ".*Breakpoint.*" @@ -577,8 +537,6 @@ proc test_complex_watchpoint {} { proc test_watchpoint_and_breakpoint {} { global gdb_prompt - maybe_clean_restart - # This is a test for PR gdb/38, which involves setting a # watchpoint right after you've reached a breakpoint. @@ -708,8 +666,6 @@ proc test_wide_location_2 {} { proc test_inaccessible_watchpoint {} { global gdb_prompt - maybe_clean_restart - # This is a test for watchpoints on currently inaccessible (but later # valid) memory. |