diff options
| -rw-r--r-- | gdb/ChangeLog | 9 | ||||
| -rw-r--r-- | gdb/gdbserver/Makefile.in | 16 | ||||
| -rw-r--r-- | gdb/gdbserver/README | 49 | ||||
| -rw-r--r-- | gdb/gdbserver/aclocal.m4 | 100 | ||||
| -rw-r--r-- | gdb/gdbserver/config.in | 16 | ||||
| -rwxr-xr-x | gdb/gdbserver/configure | 734 | ||||
| -rw-r--r-- | gdb/gdbserver/configure.in | 37 |
7 files changed, 808 insertions, 153 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 8f8d649..4827b34 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,12 @@ +2002-02-19 Daniel Jacobowitz <drow@mvista.com> + + * gdbserver/README: Update documentation. + * gdbserver/configure.in: Update configury to match documentation. + * gdbserver/Makefile.in: Likewise. + * gdbserver/configure: Regenerated. + * gdbserver/aclocal.m4: New file, generated by aclocal. + * gdbserver/config.in: New file, generated by autoheader. + 2002-02-19 Richard Earnshaw <rearnsha@arm.com> * config/djgpp/fnchange.lst: Add change rules for armnbsd-tdep.c and diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in index 82ac030..f570da2 100644 --- a/gdb/gdbserver/Makefile.in +++ b/gdb/gdbserver/Makefile.in @@ -48,18 +48,7 @@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ -AR = ar -AR_FLAGS = qv -RANLIB = ranlib - -# If you are compiling with GCC, make sure that either 1) You use the -# -traditional flag, or 2) You have the fixed include files where GCC -# can reach them. Otherwise the ioctl calls in inflow.c -# will be incorrectly compiled. The "fixincludes" script in the gcc -# distribution will fix your include files up. -#CC=cc -#CC=gcc -traditional -GCC=gcc +CC = @CC@ # Directory containing source files. Don't clean up the spacing, # this exact string is matched for by the "configure" script. @@ -106,7 +95,8 @@ GLOBAL_CFLAGS = ${MT_CFLAGS} ${MH_CFLAGS} # CFLAGS is specifically reserved for setting from the command line # when running make. I.E. "make CFLAGS=-Wmissing-prototypes". -CFLAGS = -g +CFLAGS = @CFLAGS@ + # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros. INTERNAL_CFLAGS = ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} \ ${INCLUDE_CFLAGS} ${BFD_CFLAGS} -DGDBSERVER diff --git a/gdb/gdbserver/README b/gdb/gdbserver/README index 2281bf6..71887ca 100644 --- a/gdb/gdbserver/README +++ b/gdb/gdbserver/README @@ -44,6 +44,14 @@ GDBs `target remote' command, which will be described shortly. Note that if you chose a port number that conflicts with another service, gdbserver will print an error message and exit. +On some targets, gdbserver can also attach to running programs. This is +accomplished via the --attach argument. The syntax is: + + target> gdbserver COMM --attach PID + +PID is the process ID of a currently running process. It isn't necessary +to point gdbserver at a binary for the running process. + Usage (host side): You need an unstripped copy of the target program on your host system, since @@ -67,7 +75,16 @@ TCP connections, you must start up gdbserver prior to using the `target remote' command, otherwise you may get an error that looks something like `Connection refused'. -Building: +Building gdbserver: + +The supported targets as of February 2002 are: + arm-*-linux-gnu + i386-*-linux-gnu + ia64-*-linux-gnu + m68k-*-linux-gnu + mips-*-linux-gnu + powerpc-*-linux-gnu + sh-*-linux-gnu Configuring gdbserver you should specify the same machine for host and target (which are the machine that gdbserver is going to run on. This @@ -76,27 +93,21 @@ gdbserver automatically as part of building a whole tree of tools does not currently work if cross-compilation is involved (we don't get the right CC in the Makefile, to start with)). -gdbserver should work on sparc-sun-sunos4* or Lynx. The following -instructions pertain to Lynx. To build the server for Lynx, make a -new copy of the distribution onto a disk that is NFS shared with the -Lynx system. Lets say that's in a directory called xyzzy. Then, -follow these steps under the host system: - - 1) cd xyzzy/gdb/gdbserver - 2) ../../configure i386-none-lynx - -When that completes, do the following on the Lynx system: - - 3) cd xyzzy/gdb/gdbserver - 4) make CC=gcc +Building gdbserver for your target is very straightforward. If you build +GDB natively on a target which gdbserver supports, it will be built +automatically when you build GDB. You can also build just gdbserver: -It should build with only a minor complaint about NULL being redefined. That's -a LynxOS problem, and can be ignored. + % mkdir obj + % cd obj + % path-to-gdbserver-sources/configure + % make -It's also possible that you may have a cross-compiler to Lynx. In that case, -you can skip the stuff about NFS. You would replace steps 3 & 4 with: +If you prefer to cross-compile to your target, then you can also build +gdbserver that way. In a Bourne shell, for example: - make CC=lynx-target-compiler... + % export CC=your-cross-compiler + % path-to-gdbserver-sources/configure your-target-name + % make Using GDBreplay: diff --git a/gdb/gdbserver/aclocal.m4 b/gdb/gdbserver/aclocal.m4 new file mode 100644 index 0000000..24b9ced --- /dev/null +++ b/gdb/gdbserver/aclocal.m4 @@ -0,0 +1,100 @@ +dnl aclocal.m4 generated automatically by aclocal 1.4-p4 + +dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +dnl PARTICULAR PURPOSE. + + +# serial 1 + +# @defmac AC_PROG_CC_STDC +# @maindex PROG_CC_STDC +# @ovindex CC +# If the C compiler in not in ANSI C mode by default, try to add an option +# to output variable @code{CC} to make it so. This macro tries various +# options that select ANSI C on some system or another. It considers the +# compiler to be in ANSI C mode if it handles function prototypes correctly. +# +# If you use this macro, you should check after calling it whether the C +# compiler has been set to accept ANSI C; if not, the shell variable +# @code{am_cv_prog_cc_stdc} is set to @samp{no}. If you wrote your source +# code in ANSI C, you can make an un-ANSIfied copy of it by using the +# program @code{ansi2knr}, which comes with Ghostscript. +# @end defmac + +AC_DEFUN(AM_PROG_CC_STDC, +[AC_REQUIRE([AC_PROG_CC]) +AC_BEFORE([$0], [AC_C_INLINE]) +AC_BEFORE([$0], [AC_C_CONST]) +dnl Force this before AC_PROG_CPP. Some cpp's, eg on HPUX, require +dnl a magic option to avoid problems with ANSI preprocessor commands +dnl like #elif. +dnl FIXME: can't do this because then AC_AIX won't work due to a +dnl circular dependency. +dnl AC_BEFORE([$0], [AC_PROG_CPP]) +AC_MSG_CHECKING(for ${CC-cc} option to accept ANSI C) +AC_CACHE_VAL(am_cv_prog_cc_stdc, +[am_cv_prog_cc_stdc=no +ac_save_CC="$CC" +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + AC_TRY_COMPILE( +[#include <stdarg.h> +#include <stdio.h> +#include <sys/types.h> +#include <sys/stat.h> +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +], [ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; +], +[am_cv_prog_cc_stdc="$ac_arg"; break]) +done +CC="$ac_save_CC" +]) +if test -z "$am_cv_prog_cc_stdc"; then + AC_MSG_RESULT([none needed]) +else + AC_MSG_RESULT($am_cv_prog_cc_stdc) +fi +case "x$am_cv_prog_cc_stdc" in + x|xno) ;; + *) CC="$CC $am_cv_prog_cc_stdc" ;; +esac +]) + diff --git a/gdb/gdbserver/config.in b/gdb/gdbserver/config.in new file mode 100644 index 0000000..4d91a22 --- /dev/null +++ b/gdb/gdbserver/config.in @@ -0,0 +1,16 @@ +/* config.in. Generated automatically from configure.in by autoheader 2.13. */ + +/* Define if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Define if you have the <sgtty.h> header file. */ +#undef HAVE_SGTTY_H + +/* Define if you have the <sys/reg.h> header file. */ +#undef HAVE_SYS_REG_H + +/* Define if you have the <termio.h> header file. */ +#undef HAVE_TERMIO_H + +/* Define if you have the <termios.h> header file. */ +#undef HAVE_TERMIOS_H diff --git a/gdb/gdbserver/configure b/gdb/gdbserver/configure index c3b2ee8..a8ec27c 100755 --- a/gdb/gdbserver/configure +++ b/gdb/gdbserver/configure @@ -28,7 +28,6 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= -sitefile= srcdir= target=NONE verbose= @@ -143,7 +142,6 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages - --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -314,11 +312,6 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; - -site-file | --site-file | --site-fil | --site-fi | --site-f) - ac_prev=sitefile ;; - -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) - sitefile="$ac_optarg" ;; - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -484,16 +477,12 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$sitefile"; then - if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi -else - CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -533,6 +522,310 @@ fi + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:530: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="gcc" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:560: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_prog_rejected=no + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + break + fi + done + IFS="$ac_save_ifs" +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + set dummy "$ac_dir/$ac_word" "$@" + shift + ac_cv_prog_CC="$@" + fi +fi +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + if test -z "$CC"; then + case "`uname -s`" in + *win32* | *WIN32*) + # Extract the first word of "cl", so it can be a program name with args. +set dummy cl; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:611: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="cl" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + ;; + esac + fi + test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +fi + +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +echo "configure:643: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +cat > conftest.$ac_ext << EOF + +#line 654 "configure" +#include "confdefs.h" + +main(){return(0);} +EOF +if { (eval echo configure:659: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + ac_cv_prog_cc_works=yes + # If we can't run a trivial program, we are probably using a cross compiler. + if (./conftest; exit) 2>/dev/null; then + ac_cv_prog_cc_cross=no + else + ac_cv_prog_cc_cross=yes + fi +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + ac_cv_prog_cc_works=no +fi +rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 +if test $ac_cv_prog_cc_works = no; then + { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } +fi +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +echo "configure:685: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 +cross_compiling=$ac_cv_prog_cc_cross + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +echo "configure:690: checking whether we are using GNU C" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <<EOF +#ifdef __GNUC__ + yes; +#endif +EOF +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:699: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + +if test $ac_cv_prog_gcc = yes; then + GCC=yes +else + GCC= +fi + +ac_test_CFLAGS="${CFLAGS+set}" +ac_save_CFLAGS="$CFLAGS" +CFLAGS= +echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:718: checking whether ${CC-cc} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.c +if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ac_cv_prog_cc_g=yes +else + ac_cv_prog_cc_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi + + + + +echo $ac_n "checking for ${CC-cc} option to accept ANSI C""... $ac_c" 1>&6 +echo "configure:753: checking for ${CC-cc} option to accept ANSI C" >&5 +if eval "test \"`echo '$''{'am_cv_prog_cc_stdc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + am_cv_prog_cc_stdc=no +ac_save_CC="$CC" +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + cat > conftest.$ac_ext <<EOF +#line 769 "configure" +#include "confdefs.h" +#include <stdarg.h> +#include <stdio.h> +#include <sys/types.h> +#include <sys/stat.h> +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; + +int main() { + +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + +; return 0; } +EOF +if { (eval echo configure:806: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + am_cv_prog_cc_stdc="$ac_arg"; break +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +done +CC="$ac_save_CC" + +fi + +if test -z "$am_cv_prog_cc_stdc"; then + echo "$ac_t""none needed" 1>&6 +else + echo "$ac_t""$am_cv_prog_cc_stdc" 1>&6 +fi +case "x$am_cv_prog_cc_stdc" in + x|xno) ;; + *) CC="$CC $am_cv_prog_cc_stdc" ;; +esac + + ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then @@ -580,7 +873,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:584: checking host system type" >&5 +echo "configure:877: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -601,7 +894,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:605: checking target system type" >&5 +echo "configure:898: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -619,7 +912,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:623: checking build system type" >&5 +echo "configure:916: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -641,6 +934,7 @@ test "$host_alias" != "$target_alias" && NONENONEs,x,x, && program_prefix=${target_alias}- + # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: @@ -653,7 +947,7 @@ test "$host_alias" != "$target_alias" && # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:657: checking for a BSD compatible install" >&5 +echo "configure:951: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -706,6 +1000,232 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' +echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 +echo "configure:1005: checking how to run the C preprocessor" >&5 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then +if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # This must be in double quotes, not single quotes, because CPP may get + # substituted into the Makefile and "${CC-cc}" will confuse make. + CPP="${CC-cc} -E" + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. + cat > conftest.$ac_ext <<EOF +#line 1020 "configure" +#include "confdefs.h" +#include <assert.h> +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1026: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -E -traditional-cpp" + cat > conftest.$ac_ext <<EOF +#line 1037 "configure" +#include "confdefs.h" +#include <assert.h> +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1043: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -nologo -E" + cat > conftest.$ac_ext <<EOF +#line 1054 "configure" +#include "confdefs.h" +#include <assert.h> +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1060: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP=/lib/cpp +fi +rm -f conftest* +fi +rm -f conftest* +fi +rm -f conftest* + ac_cv_prog_CPP="$CPP" +fi + CPP="$ac_cv_prog_CPP" +else + ac_cv_prog_CPP="$CPP" +fi +echo "$ac_t""$CPP" 1>&6 + +echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 +echo "configure:1085: checking for ANSI C header files" >&5 +if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1090 "configure" +#include "confdefs.h" +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <float.h> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1098: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + ac_cv_header_stdc=yes +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +cat > conftest.$ac_ext <<EOF +#line 1115 "configure" +#include "confdefs.h" +#include <string.h> +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "memchr" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +cat > conftest.$ac_ext <<EOF +#line 1133 "configure" +#include "confdefs.h" +#include <stdlib.h> +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "free" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. +if test "$cross_compiling" = yes; then + : +else + cat > conftest.$ac_ext <<EOF +#line 1154 "configure" +#include "confdefs.h" +#include <ctype.h> +#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int main () { int i; for (i = 0; i < 256; i++) +if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); +exit (0); } + +EOF +if { (eval echo configure:1165: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + ac_cv_header_stdc=no +fi +rm -fr conftest* +fi + +fi +fi + +echo "$ac_t""$ac_cv_header_stdc" 1>&6 +if test $ac_cv_header_stdc = yes; then + cat >> confdefs.h <<\EOF +#define STDC_HEADERS 1 +EOF + +fi + + +for ac_hdr in sgtty.h termio.h termios.h sys/reg.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:1193: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1198 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1203: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + + . ${srcdir}/../configure.host . ${srcdir}/../configure.tgt @@ -741,32 +1261,6 @@ s/NAT_FILE[ ]*=[ ]*\([^ ]*\)/\1/p ' ${host_makefile_frag}` fi -# If hostfile (XM_FILE) and/or targetfile (TM_FILE) and/or nativefile -# (NAT_FILE) is not set in the ?config/* file, we don't make the -# corresponding links. But we have to remove the xm.h files and tm.h -# files anyway, e.g. when switching from "configure host" to -# "configure none". - -files= -links= -rm -f xm.h -rm -f ser-hardwire.c -if test "${hostfile}" != ""; then - files="${files} ../config/${gdb_host_cpu}/${hostfile}" - links="${links} xm.h" -fi -rm -f tm.h -if test "${targetfile}" != ""; then - files="${files} ../config/${gdb_target_cpu}/${targetfile}" - links="${links} tm.h" -fi -rm -f nm.h -if test "${nativefile}" != ""; then - files="${files} ../config/${gdb_host_cpu}/${nativefile}" - links="${links} nm.h" -fi - - trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure @@ -830,19 +1324,7 @@ fi trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 -# Transform confdefs.h into DEFS. -# Protect against shell expansion while executing Makefile rules. -# Protect against Makefile macro expansion. -cat > conftest.defs <<\EOF -s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g -s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g -s%\[%\\&%g -s%\]%\\&%g -s%\$%$$%g -EOF -DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` -rm -f conftest.defs - +DEFS=-DHAVE_CONFIG_H # Without the "./", some shells look in PATH for config.status. : ${CONFIG_STATUS=./config.status} @@ -880,7 +1362,7 @@ done ac_given_srcdir=$srcdir ac_given_INSTALL="$INSTALL" -trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +trap 'rm -fr `echo "Makefile config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 EOF cat >> $CONFIG_STATUS <<EOF @@ -912,6 +1394,7 @@ s%@includedir@%$includedir%g s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g +s%@CC@%$CC%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g @@ -930,6 +1413,7 @@ s%@build_os@%$build_os%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g +s%@CPP@%$CPP%g /@host_makefile_frag@/r $host_makefile_frag s%@host_makefile_frag@%%g /@target_makefile_frag@/r $target_makefile_frag @@ -1035,51 +1519,113 @@ s%@INSTALL@%$INSTALL%g fi; done rm -f conftest.s* +# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +# NAME is the cpp macro being defined and VALUE is the value it is being given. +# +# ac_d sets the value in "#define NAME VALUE" lines. +ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' +ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' +ac_dC='\3' +ac_dD='%g' +# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". +ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_uB='\([ ]\)%\1#\2define\3' +ac_uC=' ' +ac_uD='\4%g' +# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_eB='$%\1#\2define\3' +ac_eC=' ' +ac_eD='%g' + +if test "${CONFIG_HEADERS+set}" != set; then EOF - cat >> $CONFIG_STATUS <<EOF -ac_sources="$files" -ac_dests="$links" + CONFIG_HEADERS="config.h:config.in" EOF - cat >> $CONFIG_STATUS <<\EOF -srcdir=$ac_given_srcdir -while test -n "$ac_sources"; do - set $ac_dests; ac_dest=$1; shift; ac_dests=$* - set $ac_sources; ac_source=$1; shift; ac_sources=$* +fi +for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac - echo "linking $srcdir/$ac_source to $ac_dest" + echo creating $ac_file - if test ! -r $srcdir/$ac_source; then - { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; } - fi - rm -f $ac_dest + rm -f conftest.frag conftest.in conftest.out + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + cat $ac_file_inputs > conftest.in - # Make relative symlinks. - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'` - if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then - # The dest file is in a subdirectory. - test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir" - ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`" - # A "../" for each directory in $ac_dest_dir_suffix. - ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'` - else - ac_dest_dir_suffix= ac_dots= - fi +EOF - case "$srcdir" in - [/$]*) ac_rel_source="$srcdir/$ac_source" ;; - *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;; - esac +# Transform confdefs.h into a sed script conftest.vals that substitutes +# the proper values into config.h.in to produce config.h. And first: +# Protect against being on the right side of a sed subst in config.status. +# Protect against being in an unquoted here document in config.status. +rm -f conftest.vals +cat > conftest.hdr <<\EOF +s/[\\&%]/\\&/g +s%[\\$`]%\\&%g +s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp +s%ac_d%ac_u%gp +s%ac_u%ac_e%gp +EOF +sed -n -f conftest.hdr confdefs.h > conftest.vals +rm -f conftest.hdr + +# This sed command replaces #undef with comments. This is necessary, for +# example, in the case of _POSIX_SOURCE, which is predefined and required +# on some systems where configure will not decide to define it. +cat >> conftest.vals <<\EOF +s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% +EOF - # Make a symlink if possible; otherwise try a hard link. - if ln -s $ac_rel_source $ac_dest 2>/dev/null || - ln $srcdir/$ac_source $ac_dest; then : +# Break up conftest.vals because some shells have a limit on +# the size of here documents, and old seds have small limits too. + +rm -f conftest.tail +while : +do + ac_lines=`grep -c . conftest.vals` + # grep -c gives empty output for an empty file on some AIX systems. + if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi + # Write a limited-size here document to conftest.frag. + echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS + echo 'CEOF + sed -f conftest.frag conftest.in > conftest.out + rm -f conftest.in + mv conftest.out conftest.in +' >> $CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail + rm -f conftest.vals + mv conftest.tail conftest.vals +done +rm -f conftest.vals + +cat >> $CONFIG_STATUS <<\EOF + rm -f conftest.frag conftest.h + echo "/* $ac_file. Generated automatically by configure. */" > conftest.h + cat conftest.in >> conftest.h + rm -f conftest.in + if cmp -s $ac_file conftest.h 2>/dev/null; then + echo "$ac_file is unchanged" + rm -f conftest.h else - { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; } + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + fi + rm -f $ac_file + mv conftest.h $ac_file fi -done +fi; done + EOF cat >> $CONFIG_STATUS <<EOF diff --git a/gdb/gdbserver/configure.in b/gdb/gdbserver/configure.in index ebf8762..442f170 100644 --- a/gdb/gdbserver/configure.in +++ b/gdb/gdbserver/configure.in @@ -1,5 +1,5 @@ dnl Autoconf configure script for GDB server. -dnl Copyright 2000 Free Software Foundation, Inc. +dnl Copyright 2000, 2002 Free Software Foundation, Inc. dnl dnl This file is part of GDB. dnl @@ -20,10 +20,19 @@ dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. dnl Process this file with autoconf to produce a configure script. AC_INIT(server.c) +AC_CONFIG_HEADER(config.h:config.in) + +AC_PROG_CC +AM_PROG_CC_STDC AC_CANONICAL_SYSTEM + AC_PROG_INSTALL +AC_STDC_HEADERS + +AC_CHECK_HEADERS(sgtty.h termio.h termios.h sys/reg.h) + . ${srcdir}/../configure.host . ${srcdir}/../configure.tgt @@ -61,30 +70,4 @@ s/NAT_FILE[ ]*=[ ]*\([^ ]*\)/\1/p fi changequote([,])dnl -# If hostfile (XM_FILE) and/or targetfile (TM_FILE) and/or nativefile -# (NAT_FILE) is not set in the ?config/* file, we don't make the -# corresponding links. But we have to remove the xm.h files and tm.h -# files anyway, e.g. when switching from "configure host" to -# "configure none". - -files= -links= -rm -f xm.h -rm -f ser-hardwire.c -if test "${hostfile}" != ""; then - files="${files} ../config/${gdb_host_cpu}/${hostfile}" - links="${links} xm.h" -fi -rm -f tm.h -if test "${targetfile}" != ""; then - files="${files} ../config/${gdb_target_cpu}/${targetfile}" - links="${links} tm.h" -fi -rm -f nm.h -if test "${nativefile}" != ""; then - files="${files} ../config/${gdb_host_cpu}/${nativefile}" - links="${links} nm.h" -fi -AC_LINK_FILES($files, $links) - AC_OUTPUT(Makefile) |