src-release.sh: Convert src-release to a shell script

This began as an attempt to make a few small changes to src-release
but heeding the comments at the top of the file it seemed it might be
wise to convert it to a shell script instead which should hopefully
be more maintainable.

This shell script contains most of the functionality of the Makefile
version. It can be run like this:

  # This will build gdb and compress with bzip2, gzip and xz
  ./src-release.sh -bgx gdb

The functionality that has been removed is building tarballs for insight
and gnats, which were broken in the current repository layout and
gas+binutils which amounted to basically the same thing as binutils so
didn't seem worth keeping. The script always builds a tar file,
compression is optional, so no need for specific commands to build tar
files rather than compressed tar files.

The build of gas releases has been fixed, as has extraction of version
numbers which had been broken since the switch to configure.ac files
and AC_INIT.

I also removed the code for distcleaning the intl sub-directory as it
seems like that issue has been fixed.

The script is capable of compressing with bzip2, gzip and xz which
should cover all formats available on gnu.org.

I tested it by producing release tarballs which are substantially
identical to the ones produced by the src-release script.

ChangeLog:

2014-08-27  Will Newton  <will.newton@linaro.org>

	* src-release.sh: New file.
	* src-release: Remove file.

1 files changed, 0 insertions, 318 deletions

diff --git a/src-release b/src-release
deleted file mode 100644
index b28597c..0000000
--- a/src-release
+++ /dev/null
@@ -1,318 +0,0 @@
-#   Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-#   1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-
-# This Makefile contains release scripts for gdb, binutils, and other
-# packages which live in src.  It used to be part of the top level Makefile,
-# but that turned out to be very messy and hard to maintain.
-
-# This stuff really ought to be cleaned up and turned into something other
-# than a Makefile.  As it is it's heavily recursive.
-
-# This is the name of this script (!).  Needed due to horrible recursion.
-SELF = src-release
-
-SHELL = /bin/sh
-
-BZIPPROG = bzip2
-MD5PROG = md5sum
-
-# (Default to avoid splitting info files by setting the threshold high.)
-MAKEINFOFLAGS = --split-size=5000000
-
-# pwd command to use.  Allow user to override default by setting PWDCMD in
-# the environment to account for automounters.  The make variable must not
-# be called PWDCMD, otherwise the value set here is passed to make
-# subprocesses and overrides the setting from the user's environment.
-PWD = $${PWDCMD-pwd}
-
-#
-# Support for building net releases
-
-# Files in devo used in any net release.
-DEVO_SUPPORT= README Makefile.in configure configure.ac \
-	config.guess config.sub config move-if-change \
-	COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
-	mkinstalldirs ltmain.sh missing ylwrap \
-	libtool.m4 ltsugar.m4 ltversion.m4 ltoptions.m4 \
-	Makefile.def Makefile.tpl src-release config.rpath \
-	ChangeLog MAINTAINERS README-maintainer-mode \
-	lt~obsolete.m4 ltgcc.m4 depcomp mkdep compile \
-	COPYING3 COPYING3.LIB
-
-# Files in devo/etc used in any net release.
-ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
-	make-stds.texi standards.info* configure.texi configure.info* \
-	ChangeLog configbuild.* configdev.* fdl.texi texi2pod.pl gnu-oids.texi
-
-
-# When you use `make setup-dirs' or `make taz' you should always redefine
-# this macro.
-SUPPORT_FILES = list-of-support-files-for-tool-in-question
-
-# NOTE: No double quotes in the below.  It is used within shell script
-# as VER="$(VER)"
-VER = `	if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
-	  bfd/configure --version | sed -n -e '1s,.* ,,p'; \
-	elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
-	  sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
-	elif test -f $(TOOL)/common/create-version.sh; then \
-	  $(TOOL)/common/create-version.sh $(TOOL) \
-	    'dummy-host' 'dummy-target' \
-	    VER.tmp; \
-	  cat VER.tmp | grep 'version\[\]' | sed 's/.*"\([^"]*\)".*/\1/' | sed 's/-cvs$$//'; \
-          rm -f VER.tmp; \
-	elif test -f $(TOOL)/version.in; then \
-	  head -1 $(TOOL)/version.in; \
-	elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
-	  sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
-	else \
-	  echo VERSION; \
-	fi`
-PACKAGE = $(TOOL)
-
-.PHONY: taz
-taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
-	$(MAKE) -f $(SELF) do-proto-toplev \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-	$(MAKE) -f $(SELF) do-md5sum \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-	$(MAKE) -f $(SELF) do-tar \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-	$(MAKE) -f $(SELF) do-bz2 \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: gdb-tar
-gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
-	$(MAKE) -f $(SELF) do-proto-toplev \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-	$(MAKE) -f $(SELF) do-md5sum \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-	$(MAKE) -f $(SELF) do-djunpack \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-	$(MAKE) -f $(SELF) do-tar \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: gdb-taz
-gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
-	$(MAKE) -f $(SELF) gdb-tar \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-	$(MAKE) -f $(SELF) do-bz2 \
-		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: do-proto-toplev
-do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
-	echo "==> Making $(PACKAGE)-$(VER)/"
-	# Take out texinfo from a few places.
-	sed -e '/^all\.normal: /s/\all-texinfo //' \
-	    -e '/^	install-texinfo /d' \
-	<Makefile.in >tmp
-	mv -f tmp Makefile.in
-	#
-	./configure i686-pc-linux-gnu
-	$(MAKE) configure-host configure-target \
-	    ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
-	    CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
-	# Make links, and run "make diststuff" or "make info" when needed.
-	rm -rf proto-toplev ; mkdir proto-toplev
-	set -e ; dirs="$(DEVO_SUPPORT) $(SUPPORT_FILES) $(TOOL)" ; \
-	for d in $$dirs ; do \
-	  if [ -d $$d ]; then \
-	    if [ ! -f $$d/Makefile ] ; then true ; \
-	    elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
-		(cd $$d ; $(MAKE) MAKEINFOFLAGS="$(MAKEINFOFLAGS)" \
-			  diststuff ) || exit 1 ; \
-	    elif grep '^info:' $$d/Makefile >/dev/null ; then \
-		(cd $$d ; $(MAKE) MAKEINFOFLAGS="$(MAKEINFOFLAGS)" \
-			  info ) || exit 1 ; \
-	    fi ; \
-	    if [ -d $$d/proto-$$d.dir ]; then \
-	      ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
-	    else \
-	      ln -s ../$$d proto-toplev/$$d ; \
-	    fi ; \
-	  else \
-	    if (echo x$$d | grep / >/dev/null); then \
-	      mkdir -p proto-toplev/`dirname $$d` ; \
-	      x=`dirname $$d` ; \
-	      ln -s ../`echo $$x/ | sed -e 's,[^/]*/,../,g'`$$d proto-toplev/$$d ; \
-	    else \
-	      ln -s ../$$d proto-toplev/$$d ; \
-	    fi ; \
-	  fi ; \
-	done
-	cd etc && $(MAKE) MAKEINFOFLAGS="$(MAKEINFOFLAGS)" info
-	$(MAKE) distclean
-	# Kludge for pr gdb/857.  intl/Makefile.in lacks a couple
-	# of files in the distclean rule.  Zack W is planning to make
-	# the gcc version of intl/ the master version and then push
-	# that version to src soon.  See:
-	#   http://sources.redhat.com/ml/binutils/2003-07/msg00032.html
-	# After the src version of intl/ is upgraded, we can look at
-	# moving this logic into intl/Makefile.in distclean rule
-	# if it is still needed.  -- chastain 2003-09-12
-	rm -f intl/config.cache
-	rm -f intl/config.status
-	rm -f intl/config.h
-	rm -f intl/stamp-h
-	#
-	mkdir proto-toplev/etc
-	(cd proto-toplev/etc; \
-	 for i in $(ETC_SUPPORT); do \
-		ln -s ../../etc/$$i . ; \
-	 done)
-	#
-	# Take out texinfo from configurable dirs
-	rm proto-toplev/configure.ac
-	sed -e '/^host_tools=/s/texinfo //' \
-	    <configure.ac >proto-toplev/configure.ac
-	#
-	mkdir proto-toplev/texinfo
-	ln -s ../../texinfo/texinfo.tex		proto-toplev/texinfo/
-	if test -r texinfo/util/tex3patch ; then \
-	  mkdir proto-toplev/texinfo/util && \
-	  ln -s ../../../texinfo/util/tex3patch	proto-toplev/texinfo/util ; \
-	else true; fi
-	chmod -R og=u . || chmod og=u `find . -print`
-	#
-	# Create .gmo files from .po files.
-	for f in `find . -name '*.po' -type f -print`; do \
-	     msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
-	done
-	#
-	-rm -f $(PACKAGE)-$(VER)
-	ln -s proto-toplev $(PACKAGE)-$(VER)
-
-CVS_NAMES= \( -name CVS -o -name '.cvsignore' \)
-
-.PHONY: do-tar
-do-tar:
-	echo "==> Making $(PACKAGE)-$(VER).tar"
-	-rm -f $(PACKAGE)-$(VER).tar
-	find $(PACKAGE)-$(VER) -follow $(CVS_NAMES) -prune \
-			-o -type f -print \
-		| tar cTfh - $(PACKAGE)-$(VER).tar
-
-.PHONY: do-bz2
-do-bz2:
-	echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
-	-rm -f $(PACKAGE)-$(VER).tar.bz2
-	$(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar
-
-.PHONY: do-md5sum
-do-md5sum:
-	echo "==> Adding md5 checksum to top-level directory"
-	cd proto-toplev && find * -follow $(CVS_NAMES) -prune \
-			-o -type f -print \
-		| xargs $(MD5PROG) > ../md5.new
-	-rm -f proto-toplev/md5.sum
-	mv md5.new proto-toplev/md5.sum
-
-.PHONY: do-djunpack
-do-djunpack:
-	echo "==> Adding updated djunpack.bat to top-level directory"
-	echo - 's /gdb-[0-9\.]*/$(PACKAGE)-'"$(VER)"'/'
-	sed < djunpack.bat > djunpack.new \
-		-e 's/gdb-[0-9][0-9\.]*/$(PACKAGE)-'"$(VER)"'/'
-	-rm -f proto-toplev/djunpack.bat
-	mv djunpack.new proto-toplev/djunpack.bat
-
-TEXINFO_SUPPORT= texinfo/texinfo.tex
-DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
-
-.PHONY: gas.tar.bz2
-GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep
-gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
-	$(MAKE) -f $(SELF) taz TOOL=gas \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
-
-# The FSF "binutils" release includes gprof and ld.
-.PHONY: binutils.tar.bz2
-BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld elfcpp gold gprof intl setup.com makefile.vms cpu
-binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
-	$(MAKE) -f $(SELF) taz TOOL=binutils \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"
-
-.PHONY: gas+binutils.tar.bz2
-GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
-gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
-	$(MAKE) -f $(SELF) taz TOOL=gas \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
-
-GNATS_SUPPORT_DIRS=include libiberty send-pr
-gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
-	$(MAKE) -f  $(SELF) taz TOOL=gnats \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
-
-.PHONY: gdb.tar.bz2
-GDB_SUPPORT_DIRS= bfd include libiberty opcodes readline sim intl libdecnumber cpu
-gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
-	$(MAKE) -f $(SELF) gdb-taz TOOL=gdb \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
-.PHONY: gdb.tar
-gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
-	$(MAKE) -f $(SELF) gdb-tar TOOL=gdb \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
-
-# Corresponding to the CVS "sim" module.
-.PHONY: sim.tar.bz2
-SIM_SUPPORT_DIRS= bfd opcodes libiberty include intl gdb/version.in makefile.vms
-sim.tar.bz2: $(DIST_SUPPORT) $(SIM_SUPPORT_DIRS) sim
-	$(MAKE) -f $(SELF) taz TOOL=sim \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(SIM_SUPPORT_DIRS)"
-
-.PHONY: insight.tar.bz2
-INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl libgui
-insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
-	$(MAKE) -f $(SELF) gdb-taz TOOL=gdb PACKAGE=insight \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
-.PHONY: insight.tar
-insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
-	$(MAKE) -f $(SELF) gdb-tar TOOL=gdb PACKAGE=insight \
-		MD5PROG="$(MD5PROG)" \
-		SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
-
-.NOEXPORT:
-MAKEOVERRIDES=