sim: h8300: move arch-specific settings to internal header

There's no need for these settings to be in sim-main.h which is shared
with common/ sim code, so move it all out to a new header which only
this port will include.

1 files changed, 0 insertions, 147 deletions

diff --git a/sim/h8300/sim-main.h b/sim/h8300/sim-main.h
index c034699..003e19c 100644
--- a/sim/h8300/sim-main.h
+++ b/sim/h8300/sim-main.h
@@ -3,154 +3,7 @@
 #ifndef SIM_MAIN_H
 #define SIM_MAIN_H
 
-#define DEBUG
-
-/* These define the size of main memory for the simulator.
-
-   Note the size of main memory for the H8/300H is only 256k.  Keeping it
-   small makes the simulator run much faster and consume less memory.
-
-   The linker knows about the limited size of the simulator's main memory
-   on the H8/300H (via the h8300h.sc linker script).  So if you change
-   H8300H_MSIZE, be sure to fix the linker script too.
-
-   Also note that there's a separate "eightbit" area aside from main
-   memory.  For simplicity, the simulator assumes any data memory reference
-   outside of main memory refers to the eightbit area (in theory, this
-   can only happen when simulating H8/300H programs).  We make no attempt
-   to catch overlapping addresses, wrapped addresses, etc etc.  */
-
-#define H8300_MSIZE (1 << 16)
-
-/* avolkov: 
-   Next 2 macros are ugly for any workstation, but while they're work.
-   Memory size MUST be configurable.  */
-#define H8300H_MSIZE (1 << 24) 
-#define H8300S_MSIZE (1 << 24) 
-
-#define CSIZE 1024
-
-enum h8_regnum {
-  R0_REGNUM = 0,
-  R1_REGNUM = 1,
-  R2_REGNUM = 2,
-  R3_REGNUM = 3,
-  R4_REGNUM = 4,
-  R5_REGNUM = 5,
-  R6_REGNUM = 6,
-  R7_REGNUM = 7,
-
-  SP_REGNUM = R7_REGNUM,	/* Contains address of top of stack */
-  FP_REGNUM = R6_REGNUM,	/* Contains address of executing
-				   stack frame */
-  CCR_REGNUM = 8,		/* Contains processor status */
-  PC_REGNUM  = 9,		/* Contains program counter */
-  CYCLE_REGNUM = 10,
-  EXR_REGNUM  = 11,
-  INST_REGNUM = 12,
-  TICK_REGNUM = 13,
-  MACH_REGNUM = 14,
-  MACL_REGNUM = 15,
-  SBR_REGNUM =  16,
-  VBR_REGNUM =  17,
-
-  ZERO_REGNUM = 18
-};
-
-enum h8_typecodes {
-  OP_NULL,
-  OP_REG,		/* Register direct.  */
-  OP_LOWREG,		/* Special reg syntax for "bra".  */
-  OP_DISP,		/* Register indirect w/displacement.  */
-  /* Note: h8300, h8300h, and h8300s permit only pre-decr and post-incr.  */
-  OP_PREDEC,		/* Register indirect w/pre-decrement.  */
-  OP_POSTDEC,		/* Register indirect w/post-decrement.  */
-  OP_PREINC,		/* Register indirect w/pre-increment.  */
-  OP_POSTINC,		/* Register indirect w/post-increment.  */
-  OP_PCREL,		/* PC Relative.  */
-  OP_MEM,		/* Absolute memory address.  */
-  OP_CCR,		/* Condition Code Register.  */
-  OP_IMM,		/* Immediate value.  */
-  /*OP_ABS*/		/* Un-used (duplicates op_mem?).  */
-  OP_EXR,		/* EXtended control Register.  */
-  OP_SBR, 		/* Vector Base Register.  */
-  OP_VBR,		/* Short-address Base Register.  */
-  OP_MACH,		/* Multiply Accumulator - high.  */
-  OP_MACL,		/* Multiply Accumulator - low.   */
-  /* FIXME: memory indirect?  */
-  OP_INDEXB,		/* Byte index mode */
-  OP_INDEXW,		/* Word index mode */
-  OP_INDEXL,		/* Long index mode */
-  OP_REG_DEC,		/* Register direct. affect address decrement. */
-  OP_REG_INC,		/* Register direct. affect address increment. */
-};
-
 #include "sim-basics.h"
 #include "sim-base.h"
 
-/* Structure used to describe addressing */
-
-typedef struct
-{
-  int type;
-  int reg;
-  int literal;
-} ea_type;
-
-/* Struct for instruction decoder.  */
-typedef struct
-{
-  ea_type src;
-  ea_type dst;
-  ea_type op3;
-  int opcode;
-  int next_pc;
-  int oldpc;
-  int cycles;
-#ifdef DEBUG
-  struct h8_opcode *op;
-#endif
-} decoded_inst;
-
-struct h8300_sim_cpu {
-  unsigned int regs[20];	/* 8 GR's plus ZERO, SBR, and VBR.  */
-  unsigned int pc;
-
-  int macS;			/* MAC Saturating mode */
-  int macV;			/* MAC Overflow */
-  int macN;			/* MAC Negative */
-  int macZ;			/* MAC Zero     */
-
-  int delayed_branch;
-  char **command_line;		/* Pointer to command line arguments.  */
-
-  unsigned char *memory;
-  int mask;
-};
-#define H8300_SIM_CPU(sd) ((struct h8300_sim_cpu *) CPU_ARCH_DATA (sd))
-
-struct h8300_sim_state {
-  unsigned long memory_size;
-#ifdef ADEBUG
-  int stats[O_LAST];
-#endif
-};
-#define H8300_SIM_STATE(sd) ((struct h8300_sim_state *) STATE_ARCH_DATA (sd))
-
-/* The current state of the processor; registers, memory, etc.  */
-
-#define cpu_set_pc(cpu, val)	(H8300_SIM_CPU (cpu)->pc = (val))
-#define cpu_get_pc(cpu)		(H8300_SIM_CPU (cpu)->pc)
-
-/* Magic numbers used to distinguish an exit from a breakpoint.  */
-#define LIBC_EXIT_MAGIC1 0xdead	
-#define LIBC_EXIT_MAGIC2 0xbeef	
-/* Local version of macros for decoding exit status.  
-   (included here rather than try to find target version of wait.h)
-*/
-#define SIM_WIFEXITED(V)	(((V) & 0xff) == 0)
-#define SIM_WIFSTOPPED(V)	(!SIM_WIFEXITED (V))
-#define SIM_WEXITSTATUS(V)	(((V) >> 8) & 0xff)
-#define SIM_WSTOPSIG(V)		((V) & 0x7f)
-
 #endif /* SIM_MAIN_H */