Remove ``-W -Wall'' from top-level Makefile/configure.

Add ``-W -Wall'' to sub-directories bfd, binutils, gas gprof, ld and
opcodes by the addition of WARN_CFLAGS to Makefile.am and configury to
set it.  Add configure option --enable-build-warnings.
Re-generate all and sundry using auto*-000227.

1 files changed, 348 insertions, 413 deletions

diff --git a/opcodes/configure b/opcodes/configure
index bbfa207..1b30f7e 100755
--- a/opcodes/configure
+++ b/opcodes/configure
@@ -1,7 +1,7 @@
 #! /bin/sh
 
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13.1 
+# Generated automatically using autoconf version 2.13 
 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
 #
 # This configure script is free software; the Free Software Foundation
@@ -26,6 +26,8 @@ ac_help="$ac_help
 ac_help="$ac_help
   --enable-commonbfdlib   build shared BFD/opcodes/libiberty library"
 ac_help="$ac_help
+  --enable-build-warnings Enable build-time compiler warnings if gcc is used"
+ac_help="$ac_help
   --enable-maintainer-mode enable make rules and dependencies not useful
                           (and sometimes confusing) to the casual installer"
 ac_help="$ac_help
@@ -49,6 +51,7 @@ program_suffix=NONE
 program_transform_name=s,x,x,
 silent=
 site=
+sitefile=
 srcdir=
 target=NONE
 verbose=
@@ -163,6 +166,7 @@ Configuration:
   --help                  print this message
   --no-create             do not create output files
   --quiet, --silent       do not print \`checking...' messages
+  --site-file=FILE        use FILE as the site file
   --version               print the version of autoconf that created configure
 Directory and file names:
   --prefix=PREFIX         install architecture-independent files in PREFIX
@@ -333,6 +337,11 @@ EOF
   -site=* | --site=* | --sit=*)
     site="$ac_optarg" ;;
 
+  -site-file | --site-file | --site-fil | --site-fi | --site-f)
+    ac_prev=sitefile ;;
+  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+    sitefile="$ac_optarg" ;;
+
   -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
     ac_prev=srcdir ;;
   -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
@@ -354,7 +363,7 @@ EOF
     verbose=yes ;;
 
   -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13.1"
+    echo "configure generated by autoconf version 2.13"
     exit 0 ;;
 
   -with-* | --with-*)
@@ -498,12 +507,16 @@ fi
 srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+  if test -z "$CONFIG_SITE"; then
+    if test "x$prefix" != xNONE; then
+      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+    else
+      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+    fi
   fi
+else
+  CONFIG_SITE="$sitefile"
 fi
 for ac_site_file in $CONFIG_SITE; do
   if test -r "$ac_site_file"; then
@@ -514,7 +527,7 @@ done
 
 if test -r "$cache_file"; then
   echo "loading cache $cache_file"
-      test -f "$cache_file" && . $cache_file
+  . $cache_file
 else
   echo "creating cache $cache_file"
   > $cache_file
@@ -558,130 +571,9 @@ done
 if test -z "$ac_aux_dir"; then
   { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
 fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:568: checking host system type" >&5
-if test "x$ac_cv_host" = "x" || (test "x$host" != "xNONE" && test "x$host" != "x$ac_cv_host_alias"); then
-
-# Make sure we can run config.sub.
-  if $ac_config_sub sun4 >/dev/null 2>&1; then :
-    else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-  fi
-
-  ac_cv_host_alias=$host
-  case "$ac_cv_host_alias" in
-  NONE)
-    case $nonopt in
-    NONE)
-      if ac_cv_host_alias=`$ac_config_guess`; then :
-      else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-      fi ;;
-    *) ac_cv_host_alias=$nonopt ;;
-    esac ;;
-  esac
-
-  ac_cv_host=`$ac_config_sub $ac_cv_host_alias`
-  ac_cv_host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-  ac_cv_host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-  ac_cv_host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
-  echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_host" 1>&6
-
-host=$ac_cv_host
-host_alias=$ac_cv_host_alias
-host_cpu=$ac_cv_host_cpu
-host_vendor=$ac_cv_host_vendor
-host_os=$ac_cv_host_os
-
-
-
-
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:609: checking target system type" >&5
-if test "x$ac_cv_target" = "x" || (test "x$target" != "xNONE" && test "x$target" != "x$ac_cv_target_alias"); then
-
-# Make sure we can run config.sub.
-  if $ac_config_sub sun4 >/dev/null 2>&1; then :
-    else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-  fi
-
-  ac_cv_target_alias=$target
-  case "$ac_cv_target_alias" in
-  NONE)
-    case $nonopt in
-    NONE)
-      ac_cv_target_alias=$host_alias ;;
-
-    *) ac_cv_target_alias=$nonopt ;;
-    esac ;;
-  esac
-
-  ac_cv_target=`$ac_config_sub $ac_cv_target_alias`
-  ac_cv_target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-  ac_cv_target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-  ac_cv_target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
-  echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_target" 1>&6
-
-target=$ac_cv_target
-target_alias=$ac_cv_target_alias
-target_cpu=$ac_cv_target_cpu
-target_vendor=$ac_cv_target_vendor
-target_os=$ac_cv_target_os
-
-
-
-
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:649: checking build system type" >&5
-if test "x$ac_cv_build" = "x" || (test "x$build" != "xNONE" && test "x$build" != "x$ac_cv_build_alias"); then
-
-# Make sure we can run config.sub.
-  if $ac_config_sub sun4 >/dev/null 2>&1; then :
-    else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-  fi
-
-  ac_cv_build_alias=$build
-  case "$ac_cv_build_alias" in
-  NONE)
-    case $nonopt in
-    NONE)
-      ac_cv_build_alias=$host_alias ;;
-
-    *) ac_cv_build_alias=$nonopt ;;
-    esac ;;
-  esac
-
-  ac_cv_build=`$ac_config_sub $ac_cv_build_alias`
-  ac_cv_build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-  ac_cv_build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-  ac_cv_build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
-  echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_build" 1>&6
-
-build=$ac_cv_build
-build_alias=$ac_cv_build_alias
-build_cpu=$ac_cv_build_cpu
-build_vendor=$ac_cv_build_vendor
-build_os=$ac_cv_build_os
-
-
-
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
 
 
 # Do some error checking and defaulting for the host and target type.
@@ -704,6 +596,69 @@ NONE---*---* | *---NONE---* | *---*---NONE) ;;
 *) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
 esac
 
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:607: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:628: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:646: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
 test "$host_alias" != "$target_alias" &&
   test "$program_prefix$program_suffix$program_transform_name" = \
     NONENONEs,x,x, &&
@@ -712,8 +667,8 @@ test "$host_alias" != "$target_alias" &&
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:716: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:671: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -742,8 +697,8 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:746: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:701: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -789,12 +744,12 @@ fi
 
   if test -z "$CC"; then
     case "`uname -s`" in
-    *win32* | *WIN32* | *CYGWIN*)
+    *win32* | *WIN32*)
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:797: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:752: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -824,8 +779,8 @@ fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:829: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:784: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -836,12 +791,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 840 "configure"
+#line 795 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:845: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:800: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -866,14 +821,14 @@ echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
 if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:871: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:826: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:876: checking whether we are using GNU C" >&5
-if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then
+echo "configure:831: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
@@ -881,7 +836,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:885: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:840: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -900,8 +855,8 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:904: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then
+echo "configure:859: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.c
@@ -932,7 +887,7 @@ else
 fi
 
 echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:936: checking for POSIXized ISC" >&5
+echo "configure:891: checking for POSIXized ISC" >&5
 if test -d /etc/conf/kconfig.d &&
   grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
 then
@@ -970,9 +925,9 @@ BFD_VERSION=`grep INIT_AUTOMAKE ${srcdir}/../bfd/configure.in | sed -n -e 's/[
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:974: checking for a BSD compatible install" >&5
+echo "configure:929: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
-if eval "test \"\${ac_cv_path_install+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
@@ -990,10 +945,6 @@ else
             grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
 	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
 	  else
 	    ac_cv_path_install="$ac_dir/$ac_prog -c"
 	    break 2
@@ -1022,12 +973,12 @@ echo "$ac_t""$INSTALL" 1>&6
 # It thinks the first close brace ends the variable substitution.
 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
 
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:1031: checking whether build environment is sane" >&5
+echo "configure:982: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
 echo timestamp > conftestfile
@@ -1075,18 +1026,18 @@ EOF_SED
   rm -f conftestsed
 fi
 test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},;$program_transform_name"
+  program_transform_name="s,^,${program_prefix},; $program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},;$program_transform_name"
+  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
 
 # sed with no file args requires a program.
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1088: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1039: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftestmake <<\EOF
@@ -1130,7 +1081,7 @@ EOF
 
 missing_dir=`cd $ac_aux_dir && pwd`
 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1134: checking for working aclocal" >&5
+echo "configure:1085: checking for working aclocal" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1143,7 +1094,7 @@ else
 fi
 
 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1147: checking for working autoconf" >&5
+echo "configure:1098: checking for working autoconf" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1156,7 +1107,7 @@ else
 fi
 
 echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1160: checking for working automake" >&5
+echo "configure:1111: checking for working automake" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1169,7 +1120,7 @@ else
 fi
 
 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1173: checking for working autoheader" >&5
+echo "configure:1124: checking for working autoheader" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1182,7 +1133,7 @@ else
 fi
 
 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1186: checking for working makeinfo" >&5
+echo "configure:1137: checking for working makeinfo" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1205,8 +1156,8 @@ fi
 # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1209: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_AR+set}\" = set"; then
+echo "configure:1160: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$AR"; then
@@ -1237,8 +1188,8 @@ fi
 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1241: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
+echo "configure:1192: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$RANLIB"; then
@@ -1269,8 +1220,8 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1273: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
+echo "configure:1224: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$RANLIB"; then
@@ -1375,8 +1326,8 @@ fi
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1379: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
+echo "configure:1330: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$RANLIB"; then
@@ -1414,7 +1365,7 @@ ac_prog=ld
 if test "$ac_cv_prog_gcc" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1418: checking for ld used by GCC" >&5
+echo "configure:1369: checking for ld used by GCC" >&5
   ac_prog=`($CC -print-prog-name=ld) 2>&5`
   case "$ac_prog" in
     # Accept absolute paths.
@@ -1438,12 +1389,12 @@ echo "configure:1418: checking for ld used by GCC" >&5
   esac
 elif test "$with_gnu_ld" = yes; then
   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1442: checking for GNU ld" >&5
+echo "configure:1393: checking for GNU ld" >&5
 else
   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1445: checking for non-GNU ld" >&5
+echo "configure:1396: checking for non-GNU ld" >&5
 fi
-if eval "test \"\${ac_cv_path_LD+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -z "$LD"; then
@@ -1476,8 +1427,8 @@ else
 fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1480: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"\${ac_cv_prog_gnu_ld+set}\" = set"; then
+echo "configure:1431: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   # I'd rather use --version here, but apparently some GNU ld's only accept -v.
@@ -1492,8 +1443,8 @@ echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
 
 
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1496: checking for BSD-compatible nm" >&5
-if eval "test \"\${ac_cv_path_NM+set}\" = set"; then
+echo "configure:1447: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$NM"; then
@@ -1528,8 +1479,8 @@ NM="$ac_cv_path_NM"
 echo "$ac_t""$NM" 1>&6
 
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1532: checking whether ln -s works" >&5
-if eval "test \"\${ac_cv_prog_LN_S+set}\" = set"; then
+echo "configure:1483: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   rm -f conftestdata
@@ -1577,8 +1528,8 @@ test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
 case "$lt_target" in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 1581 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:1582: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 1532 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:1533: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case "`/usr/bin/file conftest.o`" in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -1599,19 +1550,19 @@ case "$lt_target" in
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1603: checking whether the C compiler needs -belf" >&5
-if eval "test \"\${lt_cv_cc_needs_belf+set}\" = set"; then
+echo "configure:1554: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1608 "configure"
+#line 1559 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:1615: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1566: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -1695,7 +1646,7 @@ $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
 # Reload cache, that may have been modified by ltconfig
 if test -r "$cache_file"; then
   echo "loading cache $cache_file"
-      test -f "$cache_file" && . $cache_file
+  . $cache_file
 else
   echo "creating cache $cache_file"
   > $cache_file
@@ -1733,6 +1684,29 @@ if test "${enable_commonbfdlib+set}" = set; then
 esac
 fi
 
+build_warnings="-W -Wall"
+# Check whether --enable-build-warnings or --disable-build-warnings was given.
+if test "${enable_build_warnings+set}" = set; then
+  enableval="$enable_build_warnings"
+  case "${enableval}" in
+  yes)	;;
+  no)	build_warnings="-w";;
+  ,*)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
+        build_warnings="${build_warnings} ${t}";;
+  *,)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
+        build_warnings="${t} ${build_warnings}";;
+  *)    build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+  echo "Setting warning flags = $build_warnings" 6>&1
+fi
+fi
+WARN_CFLAGS=""
+if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then
+    WARN_CFLAGS="${build_warnings}"
+fi
+
+
 
 
 
@@ -1751,17 +1725,17 @@ EOF_SED
   rm -f conftestsed
 fi
 test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},;$program_transform_name"
+  program_transform_name="s,^,${program_prefix},; $program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},;$program_transform_name"
+  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
 
 # sed with no file args requires a program.
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1765: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1739: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -1784,12 +1758,12 @@ fi
   
 
 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:1788: checking for Cygwin environment" >&5
-if eval "test \"\${ac_cv_cygwin+set}\" = set"; then
+echo "configure:1762: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1793 "configure"
+#line 1767 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -1800,7 +1774,7 @@ int main() {
 return __CYGWIN__;
 ; return 0; }
 EOF
-if { (eval echo configure:1804: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1778: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_cygwin=yes
 else
@@ -1810,25 +1784,26 @@ else
   ac_cv_cygwin=no
 fi
 rm -f conftest*
+rm -f conftest*
 fi
 
 echo "$ac_t""$ac_cv_cygwin" 1>&6
 CYGWIN=
 test "$ac_cv_cygwin" = yes && CYGWIN=yes
 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:1820: checking for mingw32 environment" >&5
-if eval "test \"\${ac_cv_mingw32+set}\" = set"; then
+echo "configure:1795: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1825 "configure"
+#line 1800 "configure"
 #include "confdefs.h"
 
 int main() {
 return __MINGW32__;
 ; return 0; }
 EOF
-if { (eval echo configure:1832: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1807: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_mingw32=yes
 else
@@ -1838,57 +1813,29 @@ else
   ac_cv_mingw32=no
 fi
 rm -f conftest*
+rm -f conftest*
 fi
 
 echo "$ac_t""$ac_cv_mingw32" 1>&6
 MINGW32=
 test "$ac_cv_mingw32" = yes && MINGW32=yes
-echo $ac_n "checking for EMX OS/2 environment""... $ac_c" 1>&6
-echo "configure:1848: checking for EMX OS/2 environment" >&5
-if eval "test \"\${ac_cv_emxos2+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1853 "configure"
-#include "confdefs.h"
-
-int main() {
-return __EMX__;
-; return 0; }
-EOF
-if { (eval echo configure:1860: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_emxos2=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_emxos2=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_emxos2" 1>&6
-EMXOS2=
-test "$ac_cv_emxos2" = yes && EMXOS2=yes
-
 
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1879: checking for executable suffix" >&5
-if eval "test \"\${ac_cv_exeext+set}\" = set"; then
+echo "configure:1826: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes || test "$EMXOS2" = yes; then
+  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
   ac_cv_exeext=.exe
 else
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:1889: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:1836: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
-      *.c | *.C | *.o | *.obj | *.xcoff) ;;
+      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
       *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
       esac
     done
@@ -1911,8 +1858,8 @@ ac_exeext=$EXEEXT
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1915: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1862: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -1941,8 +1888,8 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1945: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1892: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -1988,12 +1935,12 @@ fi
 
   if test -z "$CC"; then
     case "`uname -s`" in
-    *win32* | *WIN32* | *CYGWIN*)
+    *win32* | *WIN32*)
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1996: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1943: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -2023,8 +1970,8 @@ fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2028: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1975: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -2035,12 +1982,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2039 "configure"
+#line 1986 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:2044: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1991: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -2065,14 +2012,14 @@ echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
 if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2070: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:2017: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2075: checking whether we are using GNU C" >&5
-if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then
+echo "configure:2022: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
@@ -2080,7 +2027,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2084: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2031: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -2099,8 +2046,8 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2103: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then
+echo "configure:2050: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.c
@@ -2133,13 +2080,13 @@ fi
 
 ALL_LINGUAS=
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2137: checking how to run the C preprocessor" >&5
+echo "configure:2084: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
 fi
 if test -z "$CPP"; then
-if eval "test \"\${ac_cv_prog_CPP+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     # This must be in double quotes, not single quotes, because CPP may get
@@ -2148,13 +2095,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 2152 "configure"
+#line 2099 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2158: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2165,13 +2112,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 2169 "configure"
+#line 2116 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2175: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2122: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2182,13 +2129,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 2186 "configure"
+#line 2133 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2192: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2139: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2213,12 +2160,12 @@ fi
 echo "$ac_t""$CPP" 1>&6
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2217: checking for ANSI C header files" >&5
-if eval "test \"\${ac_cv_header_stdc+set}\" = set"; then
+echo "configure:2164: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2222 "configure"
+#line 2169 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -2226,7 +2173,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2230: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2177: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2243,7 +2190,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2247 "configure"
+#line 2194 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -2261,7 +2208,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2265 "configure"
+#line 2212 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -2282,7 +2229,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 2286 "configure"
+#line 2233 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -2293,7 +2240,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:2297: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2244: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -2317,12 +2264,12 @@ EOF
 fi
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2321: checking for working const" >&5
-if eval "test \"\${ac_cv_c_const+set}\" = set"; then
+echo "configure:2268: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2326 "configure"
+#line 2273 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -2371,7 +2318,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:2375: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2322: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -2392,21 +2339,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2396: checking for inline" >&5
-if eval "test \"\${ac_cv_c_inline+set}\" = set"; then
+echo "configure:2343: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 2403 "configure"
+#line 2350 "configure"
 #include "confdefs.h"
 
 int main() {
-} $ac_kw int foo() {
+} $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:2410: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2357: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -2432,12 +2379,12 @@ EOF
 esac
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2436: checking for off_t" >&5
-if eval "test \"\${ac_cv_type_off_t+set}\" = set"; then
+echo "configure:2383: checking for off_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2441 "configure"
+#line 2388 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -2448,31 +2395,29 @@ EOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
   egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
   rm -rf conftest*
-  eval "ac_cv_type_off_t=yes"
+  ac_cv_type_off_t=yes
 else
   rm -rf conftest*
-  eval "ac_cv_type_off_t=no"
+  ac_cv_type_off_t=no
 fi
 rm -f conftest*
 
 fi
-if eval "test \"`echo '$ac_cv_type_'off_t`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-  cat >> confdefs.h <<EOF
+echo "$ac_t""$ac_cv_type_off_t" 1>&6
+if test $ac_cv_type_off_t = no; then
+  cat >> confdefs.h <<\EOF
 #define off_t long
 EOF
 
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2471: checking for size_t" >&5
-if eval "test \"\${ac_cv_type_size_t+set}\" = set"; then
+echo "configure:2416: checking for size_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2476 "configure"
+#line 2421 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -2483,19 +2428,17 @@ EOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
   egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
   rm -rf conftest*
-  eval "ac_cv_type_size_t=yes"
+  ac_cv_type_size_t=yes
 else
   rm -rf conftest*
-  eval "ac_cv_type_size_t=no"
+  ac_cv_type_size_t=no
 fi
 rm -f conftest*
 
 fi
-if eval "test \"`echo '$ac_cv_type_'size_t`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-  cat >> confdefs.h <<EOF
+echo "$ac_t""$ac_cv_type_size_t" 1>&6
+if test $ac_cv_type_size_t = no; then
+  cat >> confdefs.h <<\EOF
 #define size_t unsigned
 EOF
 
@@ -2504,19 +2447,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2508: checking for working alloca.h" >&5
-if eval "test \"\${ac_cv_header_alloca_h+set}\" = set"; then
+echo "configure:2451: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2513 "configure"
+#line 2456 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:2520: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2463: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -2537,12 +2480,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2541: checking for alloca" >&5
-if eval "test \"\${ac_cv_func_alloca_works+set}\" = set"; then
+echo "configure:2484: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2546 "configure"
+#line 2489 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -2570,7 +2513,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:2574: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -2602,12 +2545,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2606: checking whether alloca needs Cray hooks" >&5
-if eval "test \"\${ac_cv_os_cray+set}\" = set"; then
+echo "configure:2549: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2611 "configure"
+#line 2554 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -2632,12 +2575,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2636: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:2579: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2641 "configure"
+#line 2584 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2646,7 +2589,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -2656,12 +2598,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:2665: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2607: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2688,15 +2630,15 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2692: checking stack direction for C alloca" >&5
-if eval "test \"\${ac_cv_c_stack_direction+set}\" = set"; then
+echo "configure:2634: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$cross_compiling" = yes; then
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 2700 "configure"
+#line 2642 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -2715,7 +2657,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:2719: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2661: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -2740,17 +2682,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2744: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:2686: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2749 "configure"
+#line 2691 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2754: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2696: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2779,12 +2721,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2783: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:2725: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2788 "configure"
+#line 2730 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2793,7 +2735,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -2803,12 +2744,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:2812: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2753: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2833,15 +2774,15 @@ fi
 done
 
 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2837: checking for working mmap" >&5
-if eval "test \"\${ac_cv_func_mmap_fixed_mapped+set}\" = set"; then
+echo "configure:2778: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$cross_compiling" = yes; then
   ac_cv_func_mmap_fixed_mapped=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 2845 "configure"
+#line 2786 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Haertel and Jim Avera for this test.
@@ -2981,7 +2922,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:2985: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2926: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_fixed_mapped=yes
 else
@@ -3009,17 +2950,17 @@ unistd.h values.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3013: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:2954: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3018 "configure"
+#line 2959 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3023: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2964: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3049,12 +2990,12 @@ done
 __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3053: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:2994: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3058 "configure"
+#line 2999 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3063,7 +3004,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -3073,12 +3013,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3082: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3022: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3107,12 +3047,12 @@ done
      for ac_func in stpcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3111: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3051: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3116 "configure"
+#line 3056 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3121,7 +3061,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -3131,12 +3070,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3140: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3079: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3170,19 +3109,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3174: checking for LC_MESSAGES" >&5
-if eval "test \"\${am_cv_val_LC_MESSAGES+set}\" = set"; then
+echo "configure:3113: checking for LC_MESSAGES" >&5
+if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3179 "configure"
+#line 3118 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:3186: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -3203,7 +3142,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3207: checking whether NLS is requested" >&5
+echo "configure:3146: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -3223,7 +3162,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3227: checking whether included gettext is requested" >&5
+echo "configure:3166: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -3242,17 +3181,17 @@ fi
 
 	ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3246: checking for libintl.h" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3185: checking for libintl.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3251 "configure"
+#line 3190 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3256: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3195: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3269,19 +3208,19 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3273: checking for gettext in libc" >&5
-if eval "test \"\${gt_cv_func_gettext_libc+set}\" = set"; then
+echo "configure:3212: checking for gettext in libc" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3278 "configure"
+#line 3217 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:3285: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3224: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libc=yes
 else
@@ -3297,15 +3236,15 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
 
 	   if test "$gt_cv_func_gettext_libc" != "yes"; then
 	     echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3301: checking for bindtextdomain in -lintl" >&5
-ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-:%__p__%'`
-if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
+echo "configure:3240: checking for bindtextdomain in -lintl" >&5
+ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3309 "configure"
+#line 3248 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3316,7 +3255,7 @@ int main() {
 bindtextdomain()
 ; return 0; }
 EOF
-if { (eval echo configure:3320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3259: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3332,19 +3271,19 @@ fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3336: checking for gettext in libintl" >&5
-if eval "test \"\${gt_cv_func_gettext_libintl+set}\" = set"; then
+echo "configure:3275: checking for gettext in libintl" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3341 "configure"
+#line 3280 "configure"
 #include "confdefs.h"
 
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:3348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3287: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libintl=yes
 else
@@ -3372,8 +3311,8 @@ EOF
 	      # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3376: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then
+echo "configure:3315: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$MSGFMT" in
@@ -3406,12 +3345,12 @@ fi
 		for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3410: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3349: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3415 "configure"
+#line 3354 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3420,7 +3359,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -3430,12 +3368,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3439: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3377: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3462,8 +3400,8 @@ done
 		# Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3466: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then
+echo "configure:3404: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$GMSGFMT" in
@@ -3498,8 +3436,8 @@ fi
 		# Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3502: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then
+echo "configure:3440: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$XGETTEXT" in
@@ -3530,7 +3468,7 @@ else
 fi
 
 		cat > conftest.$ac_ext <<EOF
-#line 3534 "configure"
+#line 3472 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -3538,7 +3476,7 @@ extern int _nl_msg_cat_cntr;
 			       return _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:3542: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3480: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   CATOBJEXT=.gmo
 		   DATADIRNAME=share
@@ -3570,8 +3508,8 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3574: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then
+echo "configure:3512: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$MSGFMT" in
@@ -3604,8 +3542,8 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3608: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then
+echo "configure:3546: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$GMSGFMT" in
@@ -3640,8 +3578,8 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3644: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then
+echo "configure:3582: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$XGETTEXT" in
@@ -3730,7 +3668,7 @@ fi
        LINGUAS=
      else
        echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:3734: checking for catalogs to be installed" >&5
+echo "configure:3672: checking for catalogs to be installed" >&5
        NEW_LINGUAS=
        for lang in ${LINGUAS=$ALL_LINGUAS}; do
          case "$ALL_LINGUAS" in
@@ -3758,17 +3696,17 @@ echo "configure:3734: checking for catalogs to be installed" >&5
       if test "$CATOBJEXT" = ".cat"; then
 	 ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:3762: checking for linux/version.h" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3700: checking for linux/version.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3767 "configure"
+#line 3705 "configure"
 #include "confdefs.h"
 #include <linux/version.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3772: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3710: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3845,9 +3783,9 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:3849: checking for a BSD compatible install" >&5
+echo "configure:3787: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
-if eval "test \"\${ac_cv_path_install+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
@@ -3865,10 +3803,6 @@ else
             grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
 	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
 	  else
 	    ac_cv_path_install="$ac_dir/$ac_prog -c"
 	    break 2
@@ -3897,7 +3831,7 @@ echo "$ac_t""$INSTALL" 1>&6
 # It thinks the first close brace ends the variable substitution.
 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
 
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
@@ -3906,17 +3840,17 @@ for ac_hdr in string.h strings.h stdlib.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3910: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3844: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3915 "configure"
+#line 3849 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3920: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3854: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4176,7 +4110,7 @@ do
     echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
     exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
   -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13.1"
+    echo "$CONFIG_STATUS generated by autoconf version 2.13"
     exit 0 ;;
   -help | --help | --hel | --he | --h)
     echo "\$ac_cs_usage"; exit 0 ;;
@@ -4250,6 +4184,7 @@ s%@AR@%$AR%g
 s%@RANLIB@%$RANLIB%g
 s%@LN_S@%$LN_S%g
 s%@LIBTOOL@%$LIBTOOL%g
+s%@WARN_CFLAGS@%$WARN_CFLAGS%g
 s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
 s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
 s%@MAINT@%$MAINT%g
@@ -4500,5 +4435,5 @@ exit 0
 EOF
 chmod +x $CONFIG_STATUS
 rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || $SHELL $CONFIG_STATUS || exit 1
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1