Remove sh-symbianelf support

bfd/
	* Makefile.am: Remove sh-symbianelf support.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* targets.c: Likewise.
	* elf32-sh-symbian.c: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
gas/
	* config/tc-sh.c: Remove sh-symbianelf support.
	* config/tc-sh.h: Likewise.
	* configure.ac: Likewise.
	* configure.tgt: Likewise.
	* testsuite/gas/sh/reg-prefix.d: Likewise.
	* testsuite/gas/sh/sh2a-pic.d: Likewise.
	* config.in: Regenerate.
	* configure: Regenerate.
ld/
	* Makefile.am: Remove sh-symbianelf support.
	* configure.tgt: Likewise.
	* emulparams/shlsymbian.sh: Delete.
	* scripttempl/elf32sh-symbian.sc: Delete.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.

1 files changed, 0 insertions, 372 deletions

diff --git a/ld/scripttempl/elf32sh-symbian.sc b/ld/scripttempl/elf32sh-symbian.sc
deleted file mode 100644
index 3d4572d..0000000
--- a/ld/scripttempl/elf32sh-symbian.sc
+++ /dev/null
@@ -1,372 +0,0 @@
-# Copyright (C) 2014-2018 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved.
-#
-# Unusual variables checked by this code:
-#	NOP - four byte opcode for no-op (defaults to 0)
-#	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
-#	INITIAL_READONLY_SECTIONS - at start of text segment
-#	OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
-#		(e.g., .PARISC.milli)
-#	OTHER_TEXT_SECTIONS - these get put in .text when relocating
-#	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
-#		(e.g., .PARISC.global)
-#	ATTRS_SECTIONS - at the end
-#	OTHER_SECTIONS - at the end
-#	EXECUTABLE_SYMBOLS - symbols that must be defined for an
-#		executable (e.g., _DYNAMIC_LINK)
-#	TEXT_START_SYMBOLS - symbols that appear at the start of the
-#		.text section.
-#	DATA_START_SYMBOLS - symbols that appear at the start of the
-#		.data section.
-#	OTHER_GOT_SYMBOLS - symbols defined just before .got.
-#	OTHER_GOT_SECTIONS - sections just after .got.
-#	OTHER_SDATA_SECTIONS - sections just after .sdata.
-#	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
-#		.bss section besides __bss_start.
-#	DATA_PLT - .plt should be in data segment, not text segment.
-#	BSS_PLT - .plt should be in bss segment
-#	TEXT_DYNAMIC - .dynamic in text segment, not data segment.
-#	EMBEDDED - whether this is for an embedded system.
-#	SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
-#		start address of shared library.
-#	INPUT_FILES - INPUT command of files to always include
-#	WRITABLE_RODATA - if set, the .rodata section should be writable
-#	INIT_START, INIT_END -  statements just before and just after
-#	combination of .init sections.
-#	FINI_START, FINI_END - statements just before and just after
-#	combination of .fini sections.
-#	STACK_ADDR - start of a .stack section.
-#	OTHER_SYMBOLS - symbols to place right at the end of the script.
-#
-# When adding sections, do note that the names of some sections are used
-# when specifying the start address of the next.
-#
-
-#  Many sections come in three flavours.  There is the 'real' section,
-#  like ".data".  Then there are the per-procedure or per-variable
-#  sections, generated by -ffunction-sections and -fdata-sections in GCC,
-#  and useful for --gc-sections, which for a variable "foo" might be
-#  ".data.foo".  Then there are the linkonce sections, for which the linker
-#  eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
-#  The exact correspondences are:
-#
-#  Section	Linkonce section
-#  .text	.gnu.linkonce.t.foo
-#  .rodata	.gnu.linkonce.r.foo
-#  .data	.gnu.linkonce.d.foo
-#  .bss		.gnu.linkonce.b.foo
-#  .sdata	.gnu.linkonce.s.foo
-#  .sbss	.gnu.linkonce.sb.foo
-#  .sdata2	.gnu.linkonce.s2.foo
-#  .sbss2	.gnu.linkonce.sb2.foo
-#  .debug_info	.gnu.linkonce.wi.foo
-#  .tdata	.gnu.linkonce.td.foo
-#  .tbss	.gnu.linkonce.tb.foo
-#
-#  Each of these can also have corresponding .rel.* and .rela.* sections.
-
-test -z "$ENTRY" && ENTRY=_start
-test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
-test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
-if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
-test -z "${ELFSIZE}" && ELFSIZE=32
-test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
-test "$LD_FLAG" = "N" && DATA_ADDR=.
-test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
-test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
-test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"
-DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
-DATA_SEGMENT_END=""
-if test -n "${COMMONPAGESIZE}"; then
-  DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
-  DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
-fi
- INTERP=".interp    ALIGN(4) : { *(.interp) }"
-    PLT=".plt            : { *(.plt) } :dynamic :dyn"
-DYNAMIC=".dynamic        : { *(.dynamic) } :dynamic :dyn"
- RODATA=".rodata    ALIGN(4) : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
-DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.directive)  *(.gnu.lto_*) }"
-test -z "$GOT" && GOT=".got          ${RELOCATING-0} : { *(.got.plt) *(.got) } :dynamic :dyn"
-INIT_ARRAY=".init_array   ${RELOCATING-0} :
-  {
-     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_start = .);}}
-     KEEP (*(SORT(.init_array.*)))
-     KEEP (*(.init_array))
-     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_end = .);}}
-  }"
-FINI_ARRAY=".fini_array   ${RELOCATING-0} :
-  {
-    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_start = .);}}
-    KEEP (*(SORT(.fini_array.*)))
-    KEEP (*(.fini_array))
-    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_end = .);}}
-  }"
-CTOR=".ctors     ALIGN(4) :
-  {
-    ${CONSTRUCTING+${CTOR_START}}
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*crtbegin?.o(.ctors))
-
-    /* We don't want to include the .ctor section from
-       the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-    ${CONSTRUCTING+${CTOR_END}}
-  } :text"
-DTOR=".dtors        ALIGN(4) :
-  {
-    ${CONSTRUCTING+${DTOR_START}}
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*crtbegin?.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-    ${CONSTRUCTING+${DTOR_END}}
-  } :text"
-STACK="  .stack        ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
-  {
-    ${RELOCATING+_stack = .;}
-    *(.stack)
-  } :data"
-
-# If this is for an embedded system, don't add SIZEOF_HEADERS.
-if [ -z "$EMBEDDED" ]; then
-   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
-else
-   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
-fi
-
-cat <<EOF
-/* Copyright (C) 2014-2018 Free Software Foundation, Inc.
-
-   Copying and distribution of this script, with or without modification,
-   are permitted in any medium without royalty provided the copyright
-   notice and this notice are preserved.  */
-
-OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
-	      "${LITTLE_OUTPUT_FORMAT}")
-OUTPUT_ARCH(${OUTPUT_ARCH})
-${RELOCATING+ENTRY(${ENTRY})}
-
-${RELOCATING+${LIB_SEARCH_DIRS}}
-${RELOCATING+/* Do we need any of these for elf?
-   __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}}  */}
-${RELOCATING+${EXECUTABLE_SYMBOLS}}
-${RELOCATING+${INPUT_FILES}}
-${RELOCATING- /* For some reason, the Solaris linker makes bad executables
-  if gld -r is used and the intermediate file has sections starting
-  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
-  bug.  But for now assigning the zero vmas works.  */}
-
-PHDRS
-{
-  headers PT_PHDR PHDRS ;
-  text    PT_LOAD ;
-  data    PT_LOAD ;
-  dyn     PT_LOAD FLAGS (0) ;
-  dynamic PT_DYNAMIC ;
-}
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${TEXT_BASE_ADDRESS};}}}
-  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0};}}
-  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0};}}
-  ${CREATE_SHLIB-${INTERP}}
-
-  ${INITIAL_READONLY_SECTIONS}
-
-  .init ALIGN(4) :
-  {
-    ${RELOCATING+${INIT_START}}
-    KEEP (*(.init))
-    ${RELOCATING+${INIT_END}}
-  } :text =${NOP-0}
-
-  .text ALIGN(4) :
-  {
-    ${RELOCATING+${TEXT_START_SYMBOLS}}
-    *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    ${RELOCATING+${OTHER_TEXT_SECTIONS}}
-  } =${NOP-0}
-
-  ${RELOCATING+${CTOR}}
-  ${RELOCATING+${DTOR}}
-
-  .fini ALIGN(4) :
-  {
-    ${RELOCATING+${FINI_START}}
-    KEEP (*(.fini))
-    ${RELOCATING+${FINI_END}}
-  } =${NOP-0}
-
-  ${RELOCATING+PROVIDE (__etext = .);}
-  ${RELOCATING+PROVIDE (_etext = .);}
-  ${RELOCATING+PROVIDE (etext = .);}
-
-  ${WRITABLE_RODATA-${RODATA}}
-  .rodata1 ALIGN(4) : { *(.rodata1) }
-
-  ExportTable  ALIGN(4) : { KEEP (*(ExportTable)) }
-  .eh_frame_hdr ALIGN(4) : { *(.eh_frame_hdr) } :text
-
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN(128) + (. & (128 - 1));
-  .preinit_array   ${RELOCATING-0} :
-  {
-    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_start = .);}}
-    KEEP (*(.preinit_array))
-    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_end = .);}}
-  }
-  ${RELOCATING+${INIT_ARRAY}}
-  ${RELOCATING+${FINI_ARRAY}}
-
-  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
-  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
-  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
-
-  .data  ALIGN(4) :
-  {
-    ${RELOCATING+${DATA_START_SYMBOLS}}
-    *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
-    ${CONSTRUCTING+SORT(CONSTRUCTORS)}
-  } :data
-
-  .data1            ALIGN(4) : { *(.data1) } :data
-  .tdata	    ALIGN(4) : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) } :data
-  .tbss		    ALIGN(4) : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} } :data
-  .eh_frame         ALIGN(4) : { KEEP (*(.eh_frame)) } :data
-  .gcc_except_table ALIGN(4) : { *(.gcc_except_table) } :data
-  ${WRITABLE_RODATA+${RODATA}}
-  ${OTHER_READWRITE_SECTIONS}
-  ${SDATA}
-  ${OTHER_SDATA_SECTIONS}
-  ${RELOCATING+_edata = .;}
-  ${RELOCATING+PROVIDE (edata = .);}
-  ${RELOCATING+__bss_start = .;}
-  ${RELOCATING+${OTHER_BSS_SYMBOLS}}
-  ${BSS_PLT+${PLT}}
-  .bss  ALIGN(4) :
-  {
-   *(.dynbss)
-   *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
-   *(COMMON)
-   /* Align here to ensure that the .bss section occupies space up to
-      _end.  Align after .bss to ensure correct alignment even if the
-      .bss section disappears because there are no input sections.  */
-   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
-  } :data
-  ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
-  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
-  ${RELOCATING+${OTHER_END_SYMBOLS}}
-  ${RELOCATING+_end = .;}
-  ${RELOCATING+PROVIDE (end = .);}
-  ${RELOCATING+${DATA_SEGMENT_END}}
-
-  ${TEXT_DYNAMIC-${DYNAMIC}}
-  ${TEXT_DYNAMIC+${DYNAMIC}}
-  .hash         ${RELOCATING-0} : { *(.hash) } :dynamic :dyn
-  .dynsym       ${RELOCATING-0} : { *(.dynsym) } :dynamic :dyn
-  .dynstr       ${RELOCATING-0} : { *(.dynstr) } :dynamic :dyn
-  ${DATA_PLT-${BSS_PLT-${PLT}}}
-  .got.plt	  : { *(.got.plt) } :dynamic :dyn
-  .gnu.version  ${RELOCATING-0} : { *(.gnu.version) }
-  .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
-  .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
-EOF
-if [ "x$COMBRELOC" = x ]; then
-  COMBRELOCCAT=cat
-else
-  COMBRELOCCAT="cat > $COMBRELOC"
-fi
-eval $COMBRELOCCAT <<EOF
-  .rel.init     ${RELOCATING-0} : { *(.rel.init) }
-  .rela.init    ${RELOCATING-0} : { *(.rela.init) }
-  .rel.text     ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
-  .rela.text    ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
-  .rel.fini     ${RELOCATING-0} : { *(.rel.fini) }
-  .rela.fini    ${RELOCATING-0} : { *(.rela.fini) }
-  .rel.rodata   ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
-  .rela.rodata  ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
-  ${OTHER_READONLY_RELOC_SECTIONS}
-  .rel.data     ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
-  .rela.data    ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
-  .rel.tdata	${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
-  .rela.tdata	${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
-  .rel.tbss	${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
-  .rela.tbss	${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
-  .rel.ctors    ${RELOCATING-0} : { *(.rel.ctors) }
-  .rela.ctors   ${RELOCATING-0} : { *(.rela.ctors) }
-  .rel.dtors    ${RELOCATING-0} : { *(.rel.dtors) }
-  .rela.dtors   ${RELOCATING-0} : { *(.rela.dtors) }
-  .rel.got      ${RELOCATING-0} : { *(.rel.got) }
-  .rela.got     ${RELOCATING-0} : { *(.rela.got) }
-  ${OTHER_GOT_RELOC_SECTIONS}
-  .rel.bss      ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
-  .rela.bss     ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
-EOF
-if [ -n "$COMBRELOC" ]; then
-cat <<EOF
-  .rel.dyn      ${RELOCATING-0} :
-    {
-EOF
-sed -e '/^[	 ]*[{}][	 ]*$/d;/:[	 ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC
-cat <<EOF
-    }
-  .rela.dyn     ${RELOCATING-0} :
-    {
-EOF
-sed -e '/^[	 ]*[{}][	 ]*$/d;/:[	 ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC
-cat <<EOF
-    }
-EOF
-fi
-cat <<EOF
-  .rel.plt      ${RELOCATING-0} : { *(.rel.plt) }
-  .rela.plt     ${RELOCATING-0} : { *(.rela.plt) }
-  ${OTHER_PLT_RELOC_SECTIONS}
-
-
-  /* Stabs debugging sections.  */
-  .stab          0 : { *(.stab) }
-  .stabstr       0 : { *(.stabstr) }
-  .stab.excl     0 : { *(.stab.excl) }
-  .stab.exclstr  0 : { *(.stab.exclstr) }
-  .stab.index    0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-
-  .comment       0 : { *(.comment) }
-
-EOF
-
-. $srcdir/scripttempl/DWARF.sc
-
-cat <<EOF
-  ${STACK_ADDR+${STACK}}
-  ${ATTRS_SECTIONS}
-  ${OTHER_SECTIONS}
-  ${RELOCATING+${OTHER_SYMBOLS}}
-  ${RELOCATING+${DISCARDED}}
-}
-EOF