recording file death

10 files changed, 0 insertions, 1150 deletions

diff --git a/gprof/Makefile b/gprof/Makefile
deleted file mode 100755
index 30d13f0..0000000
--- a/gprof/Makefile
+++ /dev/null
@@ -1,46 +0,0 @@
-# This file was generated automatically by configure.  Do not edit.
-VPATH = .
-links = 
-host_alias = sparc-sun-solaris
-host_cpu = sparc
-host_vendor = sun
-host_os = solaris
-target_alias = sparc-sun-solaris
-target_cpu = sparc
-target_vendor = sun
-target_os = solaris
-target_makefile_frag = ./config/mt-sparc
-ALL=all.internal
-#	@(#)Makefile	5.17 (Berkeley) 5/11/90
-
-#### host and target dependent Makefile fragments come in here.
-MACHINE=sparc
-###
-
-PROG=	gprof
-SRCS=	gprof.c arcs.c dfn.c lookup.c ${MACHINE}.c hertz.c \
-	printgprof.c printlist.c
-LIBS = ../bfd/libbfd.a ../libiberty/libiberty.a
-
-OBJS=	gprof.o arcs.o dfn.o lookup.o ${MACHINE}.o hertz.o \
-	printgprof.o printlist.o
-
-CFLAGS=	-I. -I../include -DMACHINE_H=\"${MACHINE}.h\" ${TCFLAGS} ${HCFLAGS}
-.c.o:
-	$(CC) -c $(CFLAGS) $<
-
-all:	${PROG}
-
-.PHONY: check
-check:
-
-beforeinstall:
-	install -c -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} \
-	    ${.CURDIR}/gprof.flat ${.CURDIR}/gprof.callg \
-	    ${DESTDIR}/usr/share/misc
-
-$(PROG):	$(OBJS)
-	$(CC) $(CFLAGS) $(OBJS) -o $(PROG) $(LIBS)
-
-clean:
-	-rm -f $(OBJS) core gprof nohup.out
diff --git a/gprof/blurbs.c b/gprof/blurbs.c
deleted file mode 100644
index e586fa2..0000000
--- a/gprof/blurbs.c
+++ /dev/null
@@ -1,219 +0,0 @@
-#include <stdio.h>
-#include "gprof.h"
-
-void
-flat_blurb (file)
-     FILE *file;
-{
-   fputs("\n\
- %         the percentage of the total running time of the\n\
-time       program used by this function.\n\
-\n\
-cumulative a running sum of the number of seconds accounted\n\
- seconds   for by this function and those listed above it.\n\
-\n\
- self      the number of seconds accounted for by this\n\
-seconds    function alone.  This is the major sort for this\n\
-           listing.\n\
-\n\
-calls      the number of times this function was invoked, if\n\
-           this function is profiled, else blank.\n\
- \n\
- self      the average number of milliseconds spent in this\n\
-ms/call    function per call, if this function is profiled,\n\
-	   else blank.\n\
-\n\
- total     the average number of milliseconds spent in this\n\
-ms/call    function and its descendents per call, if this \n\
-	   function is profiled, else blank.\n\
-\n\
-name       the name of the function.  This is the minor sort\n\
-           for this listing. The index shows the location of\n\
-	   the function in the gprof listing. If the index is\n\
-	   in parenthesis it shows where it would appear in\n\
-	   the gprof listing if it were to be printed.\n\
-\n", file);
-}
-
-static char *callg_blurb_bsd = "\n\
-\n\
-\n\
-call graph profile:\n\
-          The sum of self and descendents is the major sort\n\
-          for this listing.\n\
-\n\
-          function entries:\n\
-\n\
-index     the index of the function in the call graph\n\
-          listing, as an aid to locating it (see below).\n\
-\n\
-%time     the percentage of the total time of the program\n\
-          accounted for by this function and its\n\
-          descendents.\n\
-\n\
-self      the number of seconds spent in this function\n\
-          itself.\n\
-\n\
-descendents\n\
-          the number of seconds spent in the descendents of\n\
-          this function on behalf of this function.\n\
-\n\
-called    the number of times this function is called (other\n\
-          than recursive calls).\n\
-\n\
-self      the number of times this function calls itself\n\
-          recursively.\n\
-\n\
-name      the name of the function, with an indication of\n\
-          its membership in a cycle, if any.\n\
-\n\
-index     the index of the function in the call graph\n\
-          listing, as an aid to locating it.\n\
-\n\
-\n\
-\n\
-          parent listings:\n\
-\n\
-self*     the number of seconds of this function's self time\n\
-          which is due to calls from this parent.\n\
-\n\
-descendents*\n\
-          the number of seconds of this function's\n\
-          descendent time which is due to calls from this\n\
-          parent.\n\
-\n\
-called**  the number of times this function is called by\n\
-          this parent.  This is the numerator of the\n\
-          fraction which divides up the function's time to\n\
-          its parents.\n\
-\n\
-total*    the number of times this function was called by\n\
-          all of its parents.  This is the denominator of\n\
-          the propagation fraction.\n\
-\n\
-parents   the name of this parent, with an indication of the\n\
-          parent's membership in a cycle, if any.\n\
-\n\
-index     the index of this parent in the call graph\n\
-          listing, as an aid in locating it.\n\
-\n\
-\n\
-\n\
-          children listings:\n\
-\n\
-self*     the number of seconds of this child's self time\n\
-          which is due to being called by this function.\n\
-\n\
-descendent*\n\
-          the number of seconds of this child's descendent's\n\
-          time which is due to being called by this\n\
-          function.\n\
-\n\
-called**  the number of times this child is called by this\n\
-          function.  This is the numerator of the\n\
-          propagation fraction for this child.\n\
-\n\
-total*    the number of times this child is called by all\n\
-          functions.  This is the denominator of the\n\
-          propagation fraction.\n\
-\n\
-children  the name of this child, and an indication of its\n\
-          membership in a cycle, if any.\n\
-\n\
-index     the index of this child in the call graph listing,\n\
-          as an aid to locating it.\n\
-\n\
-\n\
-\n\
-          * these fields are omitted for parents (or\n\
-          children) in the same cycle as the function.  If\n\
-          the function (or child) is a member of a cycle,\n\
-          the propagated times and propagation denominator\n\
-          represent the self time and descendent time of the\n\
-          cycle as a whole.\n\
-\n\
-          ** static-only parents and children are indicated\n\
-          by a call count of 0.\n\
-\n\
-\n\
-\n\
-          cycle listings:\n\
-          the cycle as a whole is listed with the same\n\
-          fields as a function entry.  Below it are listed\n\
-          the members of the cycle, and their contributions\n\
-          to the time and call counts of the cycle.\n\
-\n";
-
-static char *callg_blurb_fsf = "\n\
- This table describes the call tree of the program, and was sorted by\n\
- the total amount of time spent in each function and its children.\n\n\
- Each entry in this table consists of several lines.  The line with the\n\
- index number at the left hand margin lists the current function.\n\
- The lines above it list the functions that called this function,\n\
- and the lines below it list the functions this one called.\n\
- This line lists:\n\
-     index	A unique number given to each element of the table.\n\
-		Index numbers are sorted numerically.\n\
-		The index number is printed next to every function name so\n\
-		it is easier to look up where the function in the table.\n\n\
-     % time	This is the percentage of the `total' time that was spent\n\
-		in this function and its children.  Note that due to\n\
-		different viewpoints, functions excluded by options, etc,\n\
-		these numbers will NOT add up to 100%.\n\n\
-     self	This is the total amount of time spent in this function.\n\n\
-     children	This is the total amount of time propagated into this\n\
-		function by its children.\n\n\
-     called	This is the number of times the function was called.\n\
-		If the function called itself recursively, the number\n\
-		only includes non-recursive calls, and is followed by\n\
-		a `+' and the number of recursive calls.\n\n\
-     name	The name of the current function.  The index number is\n\
-		printed after it.  If the function is a member of a\n\
-		cycle, the cycle number is printed between the\n\
-		function's name and the index number.\n\n\n\
- For the function's parents, the fields have the following meanings:\n\n\
-     self	This is the amount of time that was propagated directly\n\
-		from the function into this parent.\n\n\
-     children	This is the amount of time that was propagated from\n\
-		the function's children into this parent.\n\n\
-     called	This is the number of times this parent called the\n\
-		function `/' the total number of times the function\n\
-		was called.  Recursive calls to the function are not\n\
-		included in the number after the `/'.\n\n\
-     name	This is the name of the parent.  The parent's index\n\
-		number is printed after it.  If the parent is a\n\
-		member of a cycle, the cycle number is printed between\n\
-		the name and the index number.\n\n\
- If the parents of the function cannot be determined, the word\n\
- `<spontaneous>' is printed in the `name' field, and all the other\n\
- fields are blank.\n\n\
- For the function's children, the fields have the following meanings:\n\n\
-     self	This is the amount of time that was propagated directly\n\
-		from the child into the function.\n\n\
-     children	This is the amount of time that was propagated from the\n\
-		child's children to the function.\n\n\
-     called	This is the number of times the function called\n\
-		this child `/' the total number of times the child\n\
-		was called.  Recursive calls by the child are not\n\
-		listed in the number after the `/'.\n\n\
-     name	This is the name of the child.  The child's index\n\
-		number is printed after it.  If the child is a\n\
-		member of a cycle, the cycle number is printed\n\
-		between the name and the index number.\n\n\
- If there are any cycles (circles) in the call graph, there is an\n\
- entry for the cycle-as-a-whole.  This entry shows who called the\n\
- cycle (as parents) and the members of the cycle (as children.)\n\
- The `+' recursive calls entry shows the number of function calls that\n\
- were internal to the cycle, and the calls entry for each member shows,\n\
- for that member, how many times it was called from other members of\n\
- the cycle.\n\n";
-
-void
-callg_blurb (file)
-     FILE *file;
-{
-    if (bsd_style_output)
-	fputs(callg_blurb_bsd, file);
-    else
-	fputs(callg_blurb_fsf, file);
-}
diff --git a/gprof/config/tmake-i386 b/gprof/config/tmake-i386
deleted file mode 100755
index 5b45798..0000000
--- a/gprof/config/tmake-i386
+++ /dev/null
@@ -1 +0,0 @@
-MACHINE=i386
diff --git a/gprof/config/tmake-sparc b/gprof/config/tmake-sparc
deleted file mode 100755
index b88bc27..0000000
--- a/gprof/config/tmake-sparc
+++ /dev/null
@@ -1 +0,0 @@
-MACHINE=sparc
diff --git a/gprof/configure b/gprof/configure
deleted file mode 100755
index a42008f..0000000
--- a/gprof/configure
+++ /dev/null
@@ -1,678 +0,0 @@
-#!/bin/sh
-# Please do not edit this file.  It is generated automatically from
-# configure.in and a configure template.
-configdirs=
-
-# the debugger.
-#set -x
-
-#!/bin/sh
-
-# Configuration script template
-#   Copyright (C) 1988, 1990, 1991 Free Software Foundation, Inc.
-
-#This file is part of GNU.
-
-#GNU CC is free software; you can redistribute it and/or modify
-#it under the terms of the GNU General Public License as published by
-#the Free Software Foundation; either version 1, or (at your option)
-#any later version.
-
-#GNU CC is distributed in the hope that it will be useful,
-#but WITHOUT ANY WARRANTY; without even the implied warranty of
-#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#GNU General Public License for more details.
-
-#You should have received a copy of the GNU General Public License
-#along with GNU CC; see the file COPYING.  If not, write to
-#the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# $Id$
-
-#
-# Shell script to create proper links to machine-dependent files in
-# preparation for compilation.
-#
-# If configure succeeds, it leaves its status in config.status.
-# If configure fails after disturbing the status quo, 
-# 	config.status is removed.
-#
-
-remove=rm
-hard_link=ln
-symbolic_link='ln -s'
-
-#for Test
-#remove="echo rm"
-#hard_link="echo ln"
-#symbolic_link="echo ln -s"
-
-progname=$0
-
-# clear some things potentially inherited from environment.
-
-ansi=
-clib=
-defaulttargets=
-destdir=
-fatal=
-hostsubdir=
-norecurse=
-removing=
-srcdir=
-srctrigger=
-target=
-targets=
-targetsubdir=
-template=
-verbose=
-
-for arg in $*;
-do
-	case ${arg} in
-	-ansi | +ansi)
-		ansi=true
-		;;
-	-clib | +c*)
-		clib=clib
-		;;
-	-destdir=* | +destdir=* | +destdi=* | +destd=* | +dest=* | +des=* | +de=* | +d=*)
-		destdir=`echo ${arg} | sed 's/[+-]d[a-z]*=//'`
-		;;
-	-forcesubdirs | +forcesubdirs | +forcesubdir | +forcesubdi | +forcesubd \
-	| +forcesub | +forcesu | +forces | +force | +forc | +for | +fo | +f)
-		forcesubdirs=${arg}
-		;;
-	-languages=* | +languages=* | +language=* | +languag=* \
-		| +langua=* | +langu=* | +lang=* | +lan=* | +la=* \
-		| +l=*)
-		languages="${languages} `echo ${arg} | sed 's/[+-]l[a-z]*=//'`"
-		;;
-	-gas | +gas | +ga | +g)
-		gas=yes
-		;;
-	-help | +h | +help)
-		fatal=true
-		;;
-	-nfp | +nfp | +nf | +n)
-		nfp=yes
-		;;
-	-norecurse | +norecurse)
-		norecurse=true
-		;;
-	-rm | +rm)
-		removing=${arg}
-		;;
-#	-srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*)
-#		srcdir=`echo ${arg} | sed 's/[+-]s[a-z]*=//'`
-#		;;
-	-target=* | +target=* | +targe=* | +targ=* | +tar=* | +ta=* | +t=*)
-		if [ -n "${targets}" ] ; then
-			forcesubdirs="+forcesubdirs"
-		fi
-
-		newtargets="${targets} `echo ${arg} | sed 's/[+-]t[a-z]*=//'`"
-		targets="${newtargets}"
-		;;
-	-template=* | +template=*)
-		template=`echo ${arg} | sed 's/[+-]template=//'`
-		;;
-	+verbose | +verbos | +verbo | +verb | +ver | +ve | +v)
-		verbose=${arg}
-		;;
-	-* | +*)
-		(echo ;
-		echo "Unrecognized option: \"${arg}\"". ;
-		echo) 1>&2
-		fatal=true
-		;;
-	*)
-		if [ -n "${hosts}" ] ; then
-			forcesubdirs="+forcesubdirs"
-		fi
-
-		newhosts="${hosts} ${arg}"
-		hosts=${newhosts}
-		;;
-	esac
-done
-
-if [ -n "${verbose}" ] ; then
-	echo `pwd`/configure $*
-	echo targets=\"${targets}\"
-fi
-
-# process host and target only if not rebuilding configure itself or removing.
-if [ -z "${template}" -a -z "${removing}" -a -z "${fatal}" ] ; then
-	# Complain if an arg is missing
-	if [ -z "${hosts}" ] ; then
-		(echo ;
-		echo "configure: No HOST specified." ;
-		echo) 2>&1
-		fatal=true
-	fi
-fi
-
-if [ -n "${fatal}" -o "${hosts}" = "help" ] ; then
-	(echo "Usage: configure HOST" ;
-	echo ;
-	echo "Options: [defaults in brackets]" ;
-	echo " +ansi		configure w/ANSI library. [no ansi lib]" ;
-	echo " +destdir=MYDIR	configure for installation into MYDIR. [/usr/local]" ;
-	echo " +forcesubdirs	configure in subdirectories.  [in source directories]" ;
-	echo " +lang=LANG	configure to build LANG. [gcc]" ;
-	echo " +help		print this message. [normal config]" ;
-	echo " +gas		configure the compilers for use with gas. [native as]" ;
-	echo " +nfp		configure the compilers default to soft floating point. [hard float]" ;
-	echo " +norecurse	configure this directory only. [recurse]" ;
-	echo " +rm		remove this configuration. [build a configuration]" ;
-	echo " +target=TARGET	configure for TARGET.  [TARGET = HOST]" ;
-	echo " +template=TEM	rebuild configure using TEM. [normal config]" ;
-	echo ;
-	echo "Where HOST and TARGET are something like \"vax\", \"sun3\", \"encore\", etc." ;
-	echo "Asking for more than one \"+target\" implies \"+forcesubdirs\".  Any other" ;
-	echo "options given will apply to all targets.") 1>&2
-
-	if [ -r config.status ] ; then
-		cat config.status
-	fi
-
-	exit 1
-fi
-
-#### configure.in common parts come in here.
-# This file is a shell script that supplies the information necessary
-# to tailor a template configure script into the configure script
-# appropriate for this directory.  For more information, check any
-# existing configure script.
-
-srctrigger=gprof.c
-srcname="gprof"
-
-## end of common part.
-
-# are we rebuilding config itself?
-if [ -n "${template}" ] ; then
-	if [ ! -r ${template} ] ; then
-		echo "Can't find template ${template}."
-		exit 1
-	fi
-
-# prep the template
-	sed -e '/^#### configure.in common parts come in here.$/,/^## end of common part.$/c\
-#### configure.in common parts come in here.\
-## end of common part.' \
-	-e '/^#### configure.in per-host parts come in here.$/,/^## end of per-host part.$/c\
-#### configure.in per-host parts come in here.\
-## end of per-host part.' \
-	-e '/^#### configure.in per-target parts come in here.$/,/^## end of per-target part.$/c\
-#### configure.in per-target parts come in here.\
-## end of per-target part.' \
-	< ${template} > template.new
-
-	if [ -r configure.in ] ; then
-		if [ -z "`grep '^# per\-host:' configure.in`" ] ; then
-			echo `pwd`/configure.in has no "per-host:" line.
-			exit 1
-		fi
-
-		if [ -z "`grep '^# per\-target:' configure.in`" ] ; then
-			echo `pwd`/configure.in has no "per-target:" line.
-			exit 1
-		fi
-
-		# split configure.in into common, per-host, and per-target parts
-		sed -e '/^# per\-host:/,$d' configure.in > configure.com
-		sed -e '1,/^# per\-host:/d' -e '/^# per\-target:/,$d' configure.in > configure.hst
-		sed -e '1,/^# per\-target:/d' configure.in > configure.tgt
-
-		# and insert them
-		sed -e '/^#### configure.in common parts come in here.$/  r configure.com' \
-			-e '/^#### configure.in per\-host parts come in here.$/  r configure.hst' \
-			-e '/^#### configure.in per\-target parts come in here.$/  r configure.tgt' \
-			template.new > configure.new
-
-		rm -f configure.com configure.tgt configure.hst
-	else
-		echo Warning: no configure.in in `pwd`
-		cat ${template} >> configure
-	fi
-
-	chmod a+x configure.new
-	rm template.new
-#	mv configure configure.old
-	mv configure.new configure
-	echo Rebuilt configure in `pwd`
-
-	if [ -z "${norecurse}" ] ; then
-		while [ -n "${configdirs}" ] ; do
-			# set configdir to car of configdirs, configdirs to cdr of configdirs
-			set ${configdirs}; configdir=$1; shift; configdirs=$*
-
-			if [ "`echo ${configdir}.*`" != "${configdir}.*" ] ; then
-				targetspecificdirs=${configdir}.*
-			else
-				targetspecificdirs=
-			fi
-
-			for i in ${configdir} ${targetspecificdirs} ; do
-				if [ -d $i ] ; then
-					if [ -r $i/configure ] ; then
-						(cd $i ;
-							./configure +template=${template} ${verbose})
-					else
-						echo No configure script in `pwd`/$i
-					fi
-				else
-					echo Warning: directory $i is missing.
-				fi
-			done
-		done
-	fi
-
-	exit 0
-fi
-
-# some sanity checks on configure.in
-if [ -z "${srctrigger}" ] ; then
-	echo srctrigger not set in configure.in. `pwd` not configured.
-	exit 1
-fi
-
-for host in ${hosts} ; do
-	# Default other arg
-	if [ -z "${targets}" -o -n "${defaulttargets}" ] ; then
-		targets=${host}
-		defaulttargets=true
-	fi
-
-	host_makefile_frag=config/hmake-${host}
-
-#### configure.in per-host parts come in here.
-
-## end of per-host part.
-
-
-	for target in ${targets} ; do
-
-		if [ -n "${verbose}" ] ; then
-			echo host \= \"${host}\", target \= \"${target}\".
-		fi
-
-		target_makefile_frag=config/tmake-${target}
-
-#### configure.in per-target parts come in here.
-
-files=
-links=
-## end of per-target part.
-
-		# Temporarily, we support only direct subdir builds.
-		hostsubdir=Host-${host}
-		targetsubdir=Target-${target}
-
-		if [ -n "${removing}" ] ; then
-			if [ -n "${forcesubdirs}" ] ; then
-				if [ -d "${hostsubdir}" ] ; then
-					rm -rf ${hostsubdir}/${targetsubdir}
-
-					if [ -z "`(ls ${hostsubdir}) 2>&1 | grep Target-`" ] ; then
-						rm -rf ${hostsubdir}
-					fi
-				else
-					echo Warning: no `pwd`/${hostsubdir} to remove.
-				fi
-			else
-				rm -f Makefile config.status ${links}
-			fi
-		else
-			if [ -n "${forcesubdirs}" ] ; then
-				# check for existing status before allowing forced subdirs.
-				if [ -f Makefile ] ; then
-					echo "Makefile already exists in source directory.  `pwd` not configured."
-					exit 1
-				fi
-
-				if [ ! -d ${hostsubdir} ] ; then mkdir ${hostsubdir} ; fi
-				cd ${hostsubdir}
-
-				if [ ! -d ${targetsubdir} ] ; then mkdir ${targetsubdir} ; fi
-				cd ${targetsubdir}
-
-				srcdir=../..
-			else
-				# if not subdir builds, then make sure none exist.
-				if [ -n "`(ls .) 2>&1 | grep Host-`" ] ; then
-					echo "Configured subdirs exist.  `pwd` not configured."
-					exit 1
-				fi
-			fi
-
-			# Find the source files, if location was not specified.
-			if [ -z "${srcdir}" ] ; then
-				srcdirdefaulted=1
-				srcdir=.
-				if [ -n "${srctrigger}" -a ! -r ${srctrigger} ] ; then
-					srcdir=..
-				fi
-			fi
-
-			if [ -n "${srctrigger}" -a ! -r ${srcdir}/${srctrigger} ] ; then
-				if [ -z "${srcdirdefaulted}" ] ; then
-					echo "${progname}: Can't find ${srcname} sources in `pwd`/${srcdir}" 1>&2
-				else
-					echo "${progname}: Can't find ${srcname} sources in `pwd`/. or `pwd`/.." 1>&2
-				fi
-
-				echo \(At least ${srctrigger} is missing.\) 1>&2
-				exit 1
-			fi
-
-			# Set up the list of links to be made.
-			# ${links} is the list of link names, and ${files} is the list of names to link to.
-
-			# Make the links.
-			while [ -n "${files}" ] ; do
-				# set file to car of files, files to cdr of files
-				set ${files}; file=$1; shift; files=$*
-				set ${links}; link=$1; shift; links=$*
-
-				if [ ! -r ${srcdir}/${file} ] ; then
-					echo "${progname}: cannot create a link \"${link}\"," 1>&2
-					echo "since the file \"${file}\" does not exist." 1>&2
-					exit 1
-				fi
-
-				${remove} -f ${link}
-				rm -f config.status
-				# Make a symlink if possible, otherwise try a hard link
-				${symbolic_link} ${srcdir}/${file} ${link} 2>/dev/null || ${hard_link} ${srcdir}/${file} ${link}
-
-				if [ ! -r ${link} ] ; then
-					echo "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2
-					exit 1
-				fi
-				echo "Linked \"${link}\" to \"${srcdir}/${file}\"."
-			done
-
-			# Create a .gdbinit file which runs the one in srcdir
-			# and tells GDB to look there for source files.
-
-			case ${srcdir} in
-			.)
-				;;
-			*)
-				echo "dir ." > .gdbinit
-				echo "dir ${srcdir}" >> .gdbinit
-				echo "source ${srcdir}/.gdbinit" >> .gdbinit
-				;;
-			esac
-
-			# Install a makefile, and make it set VPATH
-			# if necessary so that the sources are found.
-			# Also change its value of srcdir.
-
-		# FIXME-someday: This business of always writing to .tem and mv back
-		# is so that I don't screw things up while developing.  Once this
-		# template is stable, these should be optimized. xoxorich.
-
-			# Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
-			if [ "${host}" != "${target}" ] ; then
-				echo "CROSS=-DCROSS_COMPILE" > Makefile
-				echo "ALL=start.encap" >> Makefile
-			else
-				echo "ALL=all.internal" > Makefile
-			fi
-
-			# set target, host, VPATH
-			echo "host = ${host}" >> Makefile
-			echo "target = ${target}" >> Makefile
-
-			if [ -n "${forcesubdirs}" ] ; then
-				echo "subdir = /${hostsubdir}/${targetsubdir}" >> Makefile
-			else
-				echo "subdir =" >> Makefile
-			fi
-
-		#	echo "workdir = `pwd`" >> Makefile
-			echo "VPATH = ${srcdir}" >> Makefile
-
-			# add Makefile.in
-			cat ${srcdir}/Makefile.in >> Makefile
-
-			# and shake thoroughly.
-			# Conditionalize the makefile for this host.
-			if [ -f ${srcdir}/${host_makefile_frag} ] ; then
-				sed -e "/^####/  r ${srcdir}/${host_makefile_frag}" Makefile > Makefile.tem
-				mv Makefile.tem Makefile
-			fi
-
-			# Conditionalize the makefile for this target.
-			if [ -f ${srcdir}/${target_makefile_frag} ] ; then
-				sed -e "/^####/  r ${srcdir}/${target_makefile_frag}" Makefile > Makefile.tem
-				mv Makefile.tem Makefile
-			fi
-
-			# set srcdir
-			sed "s@^srcdir = \.@srcdir = ${srcdir}@" Makefile > Makefile.tem
-			mv Makefile.tem Makefile
-
-			# set destdir
-			if [ -n "${destdir}" ] ; then
-				sed "s:^destdir =.*$:destdir = ${destdir}:" Makefile > Makefile.tem
-				mv Makefile.tem Makefile
-			fi
-
-			# Remove all formfeeds, since some Makes get confused by them.
-			sed "s///" Makefile >> Makefile.tem
-			mv Makefile.tem Makefile
-
-			# reset SUBDIRS
-			sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" Makefile > Makefile.tem
-			mv Makefile.tem Makefile
-
-			# reset NONSUBDIRS
-			sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" Makefile > Makefile.tem
-			mv Makefile.tem Makefile
-
-			using=
-			if [ -f ${srcdir}/${host_makefile_frag} ] ; then
-				using=" using \"${host_makefile_frag}\""
-			fi
-
-			if [ -f ${srcdir}/${target_makefile_frag} ] ; then
-				if [ -z "${using}" ] ; then
-					andusing=" using \"${target_makefile_frag}\""
-				else
-					andusing="${using} and \"${target_makefile_frag}\""
-				fi
-			else
-				andusing=${using}
-			fi
-
-			echo "Created \"Makefile\"" in `pwd`${andusing}.
-
-			if [ "${host}" = "${target}" ] ; then
-				echo "Links are now set up for use with a ${target}." \
-					> config.status
-		#			| tee ${srcdir}/config.status
-			else
-				echo "Links are now set up for host ${host} and target ${target}." \
-					> config.status
-		#			| tee ${srcdir}/config.status
-			fi
-
-			originaldir=`pwd`
-			cd ${srcdir}
-		fi
-	done # for each target
-
-#	# Now build a Makefile for this host.
-#	if [ -n "${forcesubdirs}" ] ; then
-#		cd ${hostsubdir}
-#		cat > GNUmakefile << E!O!F
-## Makefile generated by configure for host ${host}.
-#
-#%:
-#	for i in ${targets} ; do \
-#		$(MAKE) -C Target-\$i \$@
-#
-#all clean stage1 stage2 stage3 stage4etags tags TAGS
-#E!O!F
-#	fi
-done # for each host
-
-# If there are subdirectories, then recurse. 
-
-if [ -n "${norecurse}" -o -z "${configdirs}" ] ; then exit 0 ; fi
-
-# configdirs is not null
-for configdir in ${configdirs} ; do
-	echo Configuring ${configdir}...
-	specifics=
-	commons=
-
-	if [ -n "${defaulttargets}" ] ; then
-		for host in ${hosts} ; do
-			if [ -d ${configdir}.${host} ] ; then
-				newspecifics="${specifics} ${host}"
-				specifics=${newspecifics}
-			else
-				newcommons="${commons} ${host}"
-				commons=${newcommons}
-			fi # if target specific
-		done # for each host
-
-		if [ -n "${commons}" ] ; then
-			if [ -d ${configdir} ] ; then
-				(cd ${configdir} ;
-					./configure ${commons} ${verbose} ${forcesubdirs} ${removing} "+destdir=${destdir}") \
-					| sed 's/^/	/'
-			else
-				echo Warning: directory \"${configdir}\" is missing.
-			fi
-		fi # if any common hosts
-
-		if [ -n "${specifics}" ] ; then
-			for host in ${specifics} ; do
-				echo Configuring target specific directory ${configdir}.${host}...
-				(cd ${configdir}.${host} ;
-					./configure ${host} ${verbose} ${forcesubdirs} ${removing} "+destdir=${destdir}") \
-					| sed 's/^/	/'
-			done # for host in specifics
-		fi # if there are any specifics
-	else
-
-		for target in ${targets} ; do
-			if [ -d ${configdir}.${target} ] ; then
-				newspecifics="${specifics} ${target}"
-				specifics=${newspecifics}
-			else
-				newcommons="${commons} +target=${target}"
-				commons=${newcommons}
-			fi
-
-		done # check for target specific dir override
-
-		if [ -n "${verbose}" ] ; then
-			echo "	"commons=\"${commons}\"
-			echo "	"specifics=\"${specifics}\"
-		fi # if verbose
-
-		if [ -n "${commons}" ] ; then
-			if [ -d ${configdir} ] ; then
-				(cd ${configdir} ;
-					./configure ${hosts} ${verbose} ${forcesubdirs} ${removing} ${commons} "+destdir=${destdir}") \
-					| sed 's/^/	/'
-			else
-				echo Warning: directory \"${configdir}\" is missing.
-			fi
-		fi # if any commons
-
-		if [ -n "${specifics}" ] ; then
-			for target in ${specifics} ; do
-				echo Configuring target specific directory ${configdir}.${target}...
-				(cd ${configdir}.${target} ;
-					./configure ${hosts} ${verbose} ${forcesubdirs} ${removing} "+target=${target}" "+destdir=${destdir}") \
-					| sed 's/^/	/'
-			done
-		fi # if any specifics
-	fi # not default targets
-done
-
-exit 0
-
-#
-# $Log$
-# Revision 1.1  1991/07/23 19:09:21  sef
-# Initial revision
-#
-# Revision 1.20  1991/06/18  15:30:33  rich
-# Added prms.
-#
-# Revision 1.19  1991/06/13  04:21:14  rich
-# Re-arrange so that gcc, which creates directories, gets installed
-# first.
-#
-# Revision 1.18  1991/06/12  21:23:05  rich
-# correctly propogate destdir
-#
-# Revision 1.17  1991/06/09  20:39:58  rich
-# Added +clib option.
-#
-# Revision 1.16  1991/05/27  21:04:21  rich
-# Removed clib for now.
-#
-# Revision 1.15  1991/05/27  20:54:24  rich
-# fixed a bug in multiple targets
-#
-# Revision 1.14  1991/05/22  01:44:04  rich
-# remove gdb until config issues resolve.
-#
-# Revision 1.13  1991/05/19  08:00:09  rich
-# Added gdb.
-#
-# Revision 1.12  1991/05/19  00:32:13  rich
-# Changes to deal with missing subdirs gracefully, and changes dictated
-# from dropping configure over gdb.
-#
-# Revision 1.4  1991/05/19  00:16:45  rich
-# Configure for gdb.
-#
-# Revision 1.10  1991/05/04  00:58:38  rich
-# Fix program name bug.
-#
-# Revision 1.9  1991/05/03  19:14:18  rich
-# Changed getopt to libiberty, commented out an aborted attempt at host
-# level Makefiles because it caused errors on +rm, add a warning for
-# directories expected to be removed on +rm but that don't exist.
-#
-# Revision 1.8  1991/04/24  16:50:59  rich
-# Three staging checkpoint.
-#
-# Revision 1.7  1991/04/17  01:34:47  rich
-# Added getopt for binutils, fixed problem with host dependancies in
-# configure.template.
-#
-# Revision 1.6  1991/04/16  00:18:44  rich
-# Now handles multiple hosts and targets.
-#
-# Revision 1.5  1991/04/15  23:43:44  rich
-# Now handles multiple hosts and targets.
-#
-# Revision 1.4  1991/04/13  02:11:03  rich
-# Config cut 3.  We now almost install a29k.
-#
-# Revision 1.3  1991/04/11  02:41:54  rich
-# Cut 2 config.  Subdirs.
-#
-#
-#
-
-#
-# Local Variables:
-# fill-column: 131
-# End:
-#
-
-# end of configure.template
diff --git a/gprof/gprof.callg b/gprof/gprof.callg
deleted file mode 100644
index 533c96c..0000000
--- a/gprof/gprof.callg
+++ /dev/null
@@ -1,108 +0,0 @@
-
-
-
-call graph profile:
-          The sum of self and descendents is the major sort
-          for this listing.
-
-          function entries:
-
-index     the index of the function in the call graph
-          listing, as an aid to locating it (see below).
-
-%time     the percentage of the total time of the program
-          accounted for by this function and its
-          descendents.
-
-self      the number of seconds spent in this function
-          itself.
-
-descendents
-          the number of seconds spent in the descendents of
-          this function on behalf of this function.
-
-called    the number of times this function is called (other
-          than recursive calls).
-
-self      the number of times this function calls itself
-          recursively.
-
-name      the name of the function, with an indication of
-          its membership in a cycle, if any.
-
-index     the index of the function in the call graph
-          listing, as an aid to locating it.
-
-
-
-          parent listings:
-
-self*     the number of seconds of this function's self time
-          which is due to calls from this parent.
-
-descendents*
-          the number of seconds of this function's
-          descendent time which is due to calls from this
-          parent.
-
-called**  the number of times this function is called by
-          this parent.  This is the numerator of the
-          fraction which divides up the function's time to
-          its parents.
-
-total*    the number of times this function was called by
-          all of its parents.  This is the denominator of
-          the propagation fraction.
-
-parents   the name of this parent, with an indication of the
-          parent's membership in a cycle, if any.
-
-index     the index of this parent in the call graph
-          listing, as an aid in locating it.
-
-
-
-          children listings:
-
-self*     the number of seconds of this child's self time
-          which is due to being called by this function.
-
-descendent*
-          the number of seconds of this child's descendent's
-          time which is due to being called by this
-          function.
-
-called**  the number of times this child is called by this
-          function.  This is the numerator of the
-          propagation fraction for this child.
-
-total*    the number of times this child is called by all
-          functions.  This is the denominator of the
-          propagation fraction.
-
-children  the name of this child, and an indication of its
-          membership in a cycle, if any.
-
-index     the index of this child in the call graph listing,
-          as an aid to locating it.
-
-
-
-          * these fields are omitted for parents (or
-          children) in the same cycle as the function.  If
-          the function (or child) is a member of a cycle,
-          the propagated times and propagation denominator
-          represent the self time and descendent time of the
-          cycle as a whole.
-
-          ** static-only parents and children are indicated
-          by a call count of 0.
-
-
-
-          cycle listings:
-          the cycle as a whole is listed with the same
-          fields as a function entry.  Below it are listed
-          the members of the cycle, and their contributions
-          to the time and call counts of the cycle.
-
diff --git a/gprof/gprof.flat b/gprof/gprof.flat
deleted file mode 100644
index 60999a3..0000000
--- a/gprof/gprof.flat
+++ /dev/null
@@ -1,32 +0,0 @@
-
-
-
-flat profile:
-
- %         the percentage of the total running time of the
-time       program used by this function.
-
-cumulative a running sum of the number of seconds accounted
- seconds   for by this function and those listed above it.
-
- self      the number of seconds accounted for by this
-seconds    function alone.  This is the major sort for this
-           listing.
-
-calls      the number of times this function was invoked, if
-           this function is profiled, else blank.
- 
- self      the average number of milliseconds spent in this
-ms/call    function per call, if this function is profiled,
-	   else blank.
-
- total     the average number of milliseconds spent in this
-ms/call    function and its descendents per call, if this 
-	   function is profiled, else blank.
-
-name       the name of the function.  This is the minor sort
-           for this listing. The index shows the location of
-	   the function in the gprof listing. If the index is
-	   in parenthesis it shows where it would appear in
-	   the gprof listing if it were to be printed.
-
diff --git a/gprof/make-c-prog.awk b/gprof/make-c-prog.awk
deleted file mode 100644
index a0a49de..0000000
--- a/gprof/make-c-prog.awk
+++ /dev/null
@@ -1,29 +0,0 @@
-BEGIN	{
-	  FS="\"";
-	  print "/* ==> Do not modify this file!!  It is created automatically"
-	  print "   by make-c-prog.awk; modify make-c-prog.awk instead.  <== */"
-	  print ""
-	  print "#include <stdio.h>"
-	}
-
-	{
-	  if (curfun != FUNCTION)
-	    {
-	      if (curfun)
-		print "}"
-	      curfun = FUNCTION
-	      print ""
-	      print "void";
-	      printf "%s (file)\n", FUNCTION
-	      print "     FILE *file;";
-	      print "{";
-	    }
-	  printf "  fputs (\"";
-	  for (i = 1; i < NF; i++)
-	    printf "%s\\\"", $i;
-	  printf "%s\\n\", file);\n", $NF;
-	}
-
-END	{
-	  print "}"
-	}
diff --git a/gprof/pathnames.h b/gprof/pathnames.h
deleted file mode 100755
index 80cbe07..0000000
--- a/gprof/pathnames.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (c) 1989 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that: (1) source distributions retain this entire copyright
- * notice and comment, and (2) distributions including binaries display
- * the following acknowledgement:  ``This product includes software
- * developed by the University of California, Berkeley and its contributors''
- * in the documentation or other materials provided with the distribution
- * and in all advertising materials mentioning features or use of this
- * software. Neither the name of the University nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- *	@(#)pathnames.h	5.2 (Berkeley) 6/1/90
- */
-
-#define	_PATH_FLAT_BLURB	"/usr/local/lib/gprof.flat"
-#define	_PATH_CALLG_BLURB	"/usr/local/lib/gprof.callg"
-
diff --git a/gprof/t.c b/gprof/t.c
deleted file mode 100755
index 62272b4..0000000
--- a/gprof/t.c
+++ /dev/null
@@ -1,12 +0,0 @@
-void
-foo(int x) {
-	if (x&3)
-		foo (x-1);
-}
-
-main() {
-	int i;
-
-	for (i=0; i< 1024; i++)
-		foo(i);
-}