enable target async by default; separate MI and target notions of async

This finally makes background execution commands possible by default.

However, in order to do that, there's one last thing we need to do --
we need to separate the MI and target notions of "async".  Unlike the
CLI, where the user explicitly requests foreground vs background
execution in the execution command itself (c vs c&), MI chose to treat
"set target-async" specially -- setting it changes the default
behavior of execution commands.

So, we can't simply "set target-async" default to on, as that would
affect MI frontends.  Instead we have to make the setting MI-specific,
and teach MI about sync commands on top of an async target.

Because the "target" word in "set target-async" ends up as a potential
source of confusion, the patch adds a "set mi-async" option, and makes
"set target-async" a deprecated alias.

Rather than make the targets always async, this patch introduces a new
"maint set target-async" option so that the GDB developer can control
whether the target is async.  This makes it simpler to debug issues
arising only in the synchronous mode; important because sync mode
seems unlikely to go away.

Unlike in previous revisions, "set target-async" does not affect this
new maint parameter.  The rationale for this is that then one can
easily run the test suite in the "maint set target-async off" mode and
have tests that enable mi-async fail just like they fail on
non-async-capable targets.  This emulation is exactly the point of the
maint option.

I had asked Tom in a previous iteration to split the actual change of
the target async default to a separate patch, but it turns out that
that is quite awkward in this version of the patch, because with MI
async and target async decoupled (unlike in previous versions), if we
don't flip the default at the same time, then just "set target-async
on" alone never actually manages to do anything.  It's best to not
have that transitory state in the tree.

Given "set target-async on" now only has effect for MI, the patch goes
through the testsuite removing it from non-MI tests.  MI tests are
adjusted to use the new and less confusing "mi-async" spelling.

2014-05-29  Pedro Alves  <palves@redhat.com>
	    Tom Tromey  <tromey@redhat.com>

	* NEWS: Mention "maint set target-async", "set mi-async", and that
	background execution commands are now always available.
	* target.h (target_async_permitted): Update comment.
	* target.c (target_async_permitted, target_async_permitted_1):
	Default to 1.
	(set_target_async_command): Rename to ...
	(maint_set_target_async_command): ... this.
	(show_target_async_command): Rename to ...
	(maint_show_target_async_command): ... this.
	(_initialize_target): Adjust.
	* infcmd.c (prepare_execution_command): Make extern.
	* inferior.h (prepare_execution_command): Declare.
	* infrun.c (set_observer_mode): Leave target async alone.
	* mi/mi-interp.c (mi_interpreter_init): Install
	mi_on_sync_execution_done as sync_execution_done observer.
	(mi_on_sync_execution_done): New function.
	(mi_execute_command_input_handler): Don't print the prompt if we
	just started a synchronous command with an async target.
	(mi_on_resume): Check sync_execution before printing prompt.
	* mi/mi-main.h (mi_async_p): Declare.
	* mi/mi-main.c: Include gdbcmd.h.
	(mi_async_p): New function.
	(mi_async, mi_async_1): New globals.
	(set_mi_async_command, show_mi_async_command, mi_async): New
	functions.
	(exec_continue): Call prepare_execution_command.
	(run_one_inferior, mi_cmd_exec_run, mi_cmd_list_target_features)
	(mi_execute_async_cli_command): Use mi_async_p.
	(_initialize_mi_main): Install "set mi-async".  Make
	"target-async" a deprecated alias.

2014-05-29  Pedro Alves  <palves@redhat.com>
	    Tom Tromey  <tromey@redhat.com>

	* gdb.texinfo (Non-Stop Mode): Remove "set target-async 1"
	from example.
	(Asynchronous and non-stop modes): Document '-gdb-set mi-async'.
	Mention that target-async is now deprecated.
	(Maintenance Commands): Document maint set/show target-async.

2014-05-29  Pedro Alves  <palves@redhat.com>
	    Tom Tromey  <tromey@redhat.com>

	* gdb.base/async-shell.exp: Don't enable target-async.
	* gdb.base/async.exp
	* gdb.base/corefile.exp (corefile_test_attach): Remove 'async'
	parameter.  Adjust.
	(top level): Don't test with "target-async".
	* gdb.base/dprintf-non-stop.exp: Don't enable target-async.
	* gdb.base/gdb-sigterm.exp: Don't test with "target-async".
	* gdb.base/inferior-died.exp: Don't enable target-async.
	* gdb.base/interrupt-noterm.exp: Likewise.
	* gdb.mi/mi-async.exp: Use "mi-async" instead of "target-async".
	* gdb.mi/mi-nonstop-exit.exp: Likewise.
	* gdb.mi/mi-nonstop.exp: Likewise.
	* gdb.mi/mi-ns-stale-regcache.exp: Likewise.
	* gdb.mi/mi-nsintrall.exp: Likewise.
	* gdb.mi/mi-nsmoribund.exp: Likewise.
	* gdb.mi/mi-nsthrexec.exp: Likewise.
	* gdb.mi/mi-watch-nonstop.exp: Likewise.
	* gdb.multi/watchpoint-multi.exp: Adjust comment.
	* gdb.python/py-evsignal.exp: Don't enable target-async.
	* gdb.python/py-evthreads.exp: Likewise.
	* gdb.python/py-prompt.exp: Likewise.
	* gdb.reverse/break-precsave.exp: Don't test with "target-async".
	* gdb.server/solib-list.exp: Don't enable target-async.
	* gdb.threads/thread-specific-bp.exp: Likewise.
	* lib/mi-support.exp: Adjust to use mi-async.

24 files changed, 44 insertions, 58 deletions

diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index 3dc8f5f..0297ec6 100644
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,4 +1,33 @@
 2014-05-29  Pedro Alves  <palves@redhat.com>
+	    Tom Tromey  <tromey@redhat.com>
+
+	* gdb.base/async-shell.exp: Don't enable target-async.
+	* gdb.base/async.exp
+	* gdb.base/corefile.exp (corefile_test_attach): Remove 'async'
+	parameter.  Adjust.
+	(top level): Don't test with "target-async".
+	* gdb.base/dprintf-non-stop.exp: Don't enable target-async.
+	* gdb.base/gdb-sigterm.exp: Don't test with "target-async".
+	* gdb.base/inferior-died.exp: Don't enable target-async.
+	* gdb.base/interrupt-noterm.exp: Likewise.
+	* gdb.mi/mi-async.exp: Use "mi-async" instead of "target-async".
+	* gdb.mi/mi-nonstop-exit.exp: Likewise.
+	* gdb.mi/mi-nonstop.exp: Likewise.
+	* gdb.mi/mi-ns-stale-regcache.exp: Likewise.
+	* gdb.mi/mi-nsintrall.exp: Likewise.
+	* gdb.mi/mi-nsmoribund.exp: Likewise.
+	* gdb.mi/mi-nsthrexec.exp: Likewise.
+	* gdb.mi/mi-watch-nonstop.exp: Likewise.
+	* gdb.multi/watchpoint-multi.exp: Adjust comment.
+	* gdb.python/py-evsignal.exp: Don't enable target-async.
+	* gdb.python/py-evthreads.exp: Likewise.
+	* gdb.python/py-prompt.exp: Likewise.
+	* gdb.reverse/break-precsave.exp: Don't test with "target-async".
+	* gdb.server/solib-list.exp: Don't enable target-async.
+	* gdb.threads/thread-specific-bp.exp: Likewise.
+	* lib/mi-support.exp: Adjust to use mi-async.
+
+2014-05-29  Pedro Alves  <palves@redhat.com>
 
 	PR gdb/13860
 	* gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop
diff --git a/gdb/testsuite/gdb.base/async-shell.exp b/gdb/testsuite/gdb.base/async-shell.exp
index 4890a59..f0550bc 100644
--- a/gdb/testsuite/gdb.base/async-shell.exp
+++ b/gdb/testsuite/gdb.base/async-shell.exp
@@ -31,7 +31,6 @@ if { [prepare_for_testing ${testfile}.exp ${testfile} $srcfile] } {
 
 set gdbindex_warning_re "warning: Skipping \[^\r\n\]+ \\.gdb_index section \[^\r\n\]*\r\nDo \"set use-deprecated-index-sections on\" before the file is read\r\nto use the section anyway\\."
 
-gdb_test_no_output "set target-async on "
 gdb_test_no_output "set non-stop on"
 gdb_test "run &" "Starting program: \[^\r\n\]*(\r\n$gdbindex_warning_re)?"
 
diff --git a/gdb/testsuite/gdb.base/async.exp b/gdb/testsuite/gdb.base/async.exp
index f0a18e8..0f99b01 100644
--- a/gdb/testsuite/gdb.base/async.exp
+++ b/gdb/testsuite/gdb.base/async.exp
@@ -25,8 +25,6 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
     return -1
 }
 
-gdb_test_no_output "set target-async on"
-
 #
 # set it up at a breakpoint so we can play with it
 #
diff --git a/gdb/testsuite/gdb.base/corefile.exp b/gdb/testsuite/gdb.base/corefile.exp
index 6eb1f02..bde2de8 100644
--- a/gdb/testsuite/gdb.base/corefile.exp
+++ b/gdb/testsuite/gdb.base/corefile.exp
@@ -241,7 +241,7 @@ gdb_exit
 
 # Test an attach command will clear any loaded core file.
 
-proc corefile_test_attach {{async 0}} {
+proc corefile_test_attach {} {
     global binfile corefile gdb_prompt
 
     if ![is_remote target] {
@@ -257,11 +257,6 @@ proc corefile_test_attach {{async 0}} {
 
 	gdb_start
 
-	if {$async} {
-	    gdb_test_no_output "set target-async on" \
-		"enable target-async for attach tests"
-	}
-
 	gdb_test "core-file $corefile" "Core was generated by .*" "attach: load core again"
 	gdb_test "info files" "\r\nLocal core dump file:\r\n.*" "attach: sanity check we see the core file"
 
@@ -298,13 +293,3 @@ gdb_test_multiple "core-file $corefile" $test {
 	pass $test
     }
 }
-
-
-# Try a couple tests again with target-async.
-with_test_prefix "target-async" {
-    clean_restart ${testfile}
-
-    gdb_test_no_output "set target-async on"
-    corefile_test_run
-    corefile_test_attach 1
-}
diff --git a/gdb/testsuite/gdb.base/dprintf-non-stop.exp b/gdb/testsuite/gdb.base/dprintf-non-stop.exp
index fdaa5c1..df1e270 100644
--- a/gdb/testsuite/gdb.base/dprintf-non-stop.exp
+++ b/gdb/testsuite/gdb.base/dprintf-non-stop.exp
@@ -26,7 +26,6 @@ if [prepare_for_testing "failed to prepare for dprintf with non-stop" \
     return -1
 }
 
-gdb_test_no_output "set target-async on"
 gdb_test_no_output "set non-stop on"
 
 if ![runto main] {
diff --git a/gdb/testsuite/gdb.base/gdb-sigterm.exp b/gdb/testsuite/gdb.base/gdb-sigterm.exp
index f52517c..df0de42 100644
--- a/gdb/testsuite/gdb.base/gdb-sigterm.exp
+++ b/gdb/testsuite/gdb.base/gdb-sigterm.exp
@@ -79,17 +79,7 @@ proc do_test { pass } {
 # 50 runs should be approx. a safe number to be sure it is fixed now.
 
 for {set pass 0} {$pass < 50} {incr pass} {
-
     clean_restart ${testfile}
-    gdb_test_no_output "set target-async off" ""
-    with_test_prefix "sync" {
-        do_test $pass
-    }
-
-    clean_restart ${testfile}
-    gdb_test_no_output "set target-async on" ""
-    with_test_prefix "async" {
-        do_test $pass
-    }
+    do_test $pass
 }
 pass "$pass SIGTERM passes"
diff --git a/gdb/testsuite/gdb.base/inferior-died.exp b/gdb/testsuite/gdb.base/inferior-died.exp
index 33f92e9..152bdd8 100644
--- a/gdb/testsuite/gdb.base/inferior-died.exp
+++ b/gdb/testsuite/gdb.base/inferior-died.exp
@@ -38,7 +38,6 @@ if { [prepare_for_testing ${testfile}.exp ${testfile} ${testfile}.c] } {
 }
 
 gdb_test_no_output "set detach-on-fork off"
-gdb_test_no_output "set target-async on"
 gdb_test_no_output "set non-stop on"
 
 if ![runto_main] {
diff --git a/gdb/testsuite/gdb.base/interrupt-noterm.exp b/gdb/testsuite/gdb.base/interrupt-noterm.exp
index a22acd2..5c92b97 100644
--- a/gdb/testsuite/gdb.base/interrupt-noterm.exp
+++ b/gdb/testsuite/gdb.base/interrupt-noterm.exp
@@ -22,7 +22,6 @@ if [prepare_for_testing "failed to prepare for testing" \
 
 # Pretend there's no terminal.
 gdb_test_no_output "set interactive-mode off"
-gdb_test_no_output "set target-async on"
 
 if ![runto main] {
     fail "Can't run to main"
diff --git a/gdb/testsuite/gdb.mi/mi-async.exp b/gdb/testsuite/gdb.mi/mi-async.exp
index e41701d..0df4c98 100644
--- a/gdb/testsuite/gdb.mi/mi-async.exp
+++ b/gdb/testsuite/gdb.mi/mi-async.exp
@@ -27,7 +27,7 @@ if { !([isnative] && [istarget *-linux*]) } then {
 
 # The plan is for async mode to become the default but toggle for now.
 set saved_gdbflags $GDBFLAGS
-set GDBFLAGS [concat $GDBFLAGS " -ex \"set target-async on\""]
+set GDBFLAGS [concat $GDBFLAGS " -ex \"set mi-async on\""]
 
 load_lib mi-support.exp
 
diff --git a/gdb/testsuite/gdb.mi/mi-nonstop-exit.exp b/gdb/testsuite/gdb.mi/mi-nonstop-exit.exp
index 3727d81..5187b40 100644
--- a/gdb/testsuite/gdb.mi/mi-nonstop-exit.exp
+++ b/gdb/testsuite/gdb.mi/mi-nonstop-exit.exp
@@ -40,7 +40,7 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
 mi_gdb_load $binfile
 
 mi_gdb_test "-gdb-set non-stop 1" ".*"
-mi_gdb_test "-gdb-set target-async 1" ".*"
+mi_gdb_test "-gdb-set mi-async 1" ".*"
 mi_detect_async
 
 if { [mi_run_to_main] < 0 } {
diff --git a/gdb/testsuite/gdb.mi/mi-nonstop.exp b/gdb/testsuite/gdb.mi/mi-nonstop.exp
index 5ef74ed..ba7dfd4 100644
--- a/gdb/testsuite/gdb.mi/mi-nonstop.exp
+++ b/gdb/testsuite/gdb.mi/mi-nonstop.exp
@@ -50,7 +50,7 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
 mi_gdb_load $binfile
 
 mi_gdb_test "-gdb-set non-stop 1" ".*"
-mi_gdb_test "-gdb-set target-async 1" ".*"
+mi_gdb_test "-gdb-set mi-async 1" ".*"
 mi_detect_async
 
 if { [mi_run_to_main] < 0 } {
diff --git a/gdb/testsuite/gdb.mi/mi-ns-stale-regcache.exp b/gdb/testsuite/gdb.mi/mi-ns-stale-regcache.exp
index 754689c..ae9e5f2 100644
--- a/gdb/testsuite/gdb.mi/mi-ns-stale-regcache.exp
+++ b/gdb/testsuite/gdb.mi/mi-ns-stale-regcache.exp
@@ -53,7 +53,7 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
 mi_gdb_load $binfile
 
 mi_gdb_test "-gdb-set non-stop 1" ".*"
-mi_gdb_test "-gdb-set target-async 1" ".*"
+mi_gdb_test "-gdb-set mi-async 1" ".*"
 mi_detect_async
 
 if { [mi_run_to_main] < 0 } {
diff --git a/gdb/testsuite/gdb.mi/mi-nsintrall.exp b/gdb/testsuite/gdb.mi/mi-nsintrall.exp
index f613e7f..ac1209e 100644
--- a/gdb/testsuite/gdb.mi/mi-nsintrall.exp
+++ b/gdb/testsuite/gdb.mi/mi-nsintrall.exp
@@ -40,7 +40,7 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
 mi_gdb_load $binfile
 
 mi_gdb_test "-gdb-set non-stop 1" ".*"
-mi_gdb_test "-gdb-set target-async 1" ".*"
+mi_gdb_test "-gdb-set mi-async 1" ".*"
 mi_detect_async
 
 if { [mi_run_to_main] < 0 } {
diff --git a/gdb/testsuite/gdb.mi/mi-nsmoribund.exp b/gdb/testsuite/gdb.mi/mi-nsmoribund.exp
index 350c060..0ff04ca 100644
--- a/gdb/testsuite/gdb.mi/mi-nsmoribund.exp
+++ b/gdb/testsuite/gdb.mi/mi-nsmoribund.exp
@@ -40,7 +40,7 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
 mi_gdb_load $binfile
 
 mi_gdb_test "-gdb-set non-stop 1" ".*"
-mi_gdb_test "-gdb-set target-async 1" ".*"
+mi_gdb_test "-gdb-set mi-async 1" ".*"
 mi_detect_async
 
 if { [mi_run_to_main] < 0 } {
diff --git a/gdb/testsuite/gdb.mi/mi-nsthrexec.exp b/gdb/testsuite/gdb.mi/mi-nsthrexec.exp
index 85617d0..008a831 100644
--- a/gdb/testsuite/gdb.mi/mi-nsthrexec.exp
+++ b/gdb/testsuite/gdb.mi/mi-nsthrexec.exp
@@ -50,7 +50,7 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
 mi_gdb_load $binfile
 
 mi_gdb_test "-gdb-set non-stop 1" ".*"
-mi_gdb_test "-gdb-set target-async 1" ".*"
+mi_gdb_test "-gdb-set mi-async 1" ".*"
 mi_detect_async
 
 if { [mi_run_to_main] < 0 } {
diff --git a/gdb/testsuite/gdb.mi/mi-watch-nonstop.exp b/gdb/testsuite/gdb.mi/mi-watch-nonstop.exp
index 3dbf4c7..44371c8 100644
--- a/gdb/testsuite/gdb.mi/mi-watch-nonstop.exp
+++ b/gdb/testsuite/gdb.mi/mi-watch-nonstop.exp
@@ -52,7 +52,7 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
 mi_gdb_load $binfile
 
 mi_gdb_test "-gdb-set non-stop 1" ".*"
-mi_gdb_test "-gdb-set target-async 1" ".*"
+mi_gdb_test "-gdb-set mi-async 1" ".*"
 mi_detect_async
 
 if { [mi_run_to_main] < 0 } {
diff --git a/gdb/testsuite/gdb.multi/watchpoint-multi.exp b/gdb/testsuite/gdb.multi/watchpoint-multi.exp
index b7fb0a9..e6a8957 100644
--- a/gdb/testsuite/gdb.multi/watchpoint-multi.exp
+++ b/gdb/testsuite/gdb.multi/watchpoint-multi.exp
@@ -37,7 +37,7 @@ if { [gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executa
 
 clean_restart $executable
 
-# Simulate non-stop+target-async which also uses breakpoint always-inserted.
+# Simulate non-stop which also uses breakpoint always-inserted.
 gdb_test_no_output "set breakpoint always-inserted on"
 # displaced-stepping is also needed as other GDB sometimes still removes the
 # breakpoints, even with always-inserted on.
diff --git a/gdb/testsuite/gdb.python/py-evsignal.exp b/gdb/testsuite/gdb.python/py-evsignal.exp
index af3d53c..530fd07 100644
--- a/gdb/testsuite/gdb.python/py-evsignal.exp
+++ b/gdb/testsuite/gdb.python/py-evsignal.exp
@@ -35,7 +35,6 @@ gdb_test_no_output "python exec (open ('${pyfile}').read ())" ""
 
 gdb_test "test-events" "Event testers registered."
 gdb_test_no_output "set non-stop on"
-gdb_test_no_output "set target-async on"
 
 gdb_run_cmd
 gdb_test_multiple "" "Signal Thread 3"  {
diff --git a/gdb/testsuite/gdb.python/py-evthreads.exp b/gdb/testsuite/gdb.python/py-evthreads.exp
index ffa322f..d62624e 100644
--- a/gdb/testsuite/gdb.python/py-evthreads.exp
+++ b/gdb/testsuite/gdb.python/py-evthreads.exp
@@ -40,7 +40,6 @@ gdb_test_no_output "python exec (open ('${pyfile}').read ())" ""
 
 gdb_test "test-events" "Event testers registered."
 gdb_test_no_output "set non-stop on"
-gdb_test_no_output "set target-async on"
 
 gdb_breakpoint "main"
 gdb_breakpoint "thread2"
diff --git a/gdb/testsuite/gdb.python/py-prompt.exp b/gdb/testsuite/gdb.python/py-prompt.exp
index e376c05..ebe4cb6 100644
--- a/gdb/testsuite/gdb.python/py-prompt.exp
+++ b/gdb/testsuite/gdb.python/py-prompt.exp
@@ -90,8 +90,7 @@ if { [istarget "*-*-cygwin*"] } {
     set testpid [ exec ps -e | gawk "{ if (\$1 == $testpid) print \$4; }" ]
 }
 
-set GDBFLAGS [concat $tmp_gdbflags " -ex \"set target-async on\""]
-set GDBFLAGS [concat $GDBFLAGS " -ex \"set pagination off\""]
+set GDBFLAGS [concat $tmp_gdbflags " -ex \"set pagination off\""]
 set GDBFLAGS [concat $GDBFLAGS " -ex \"set editing on\""]
 set GDBFLAGS [concat $GDBFLAGS " -ex \"attach $testpid\""]
 set GDBFLAGS [concat $GDBFLAGS " -ex \"continue&\""]
@@ -107,8 +106,7 @@ gdb_test "python print (\"'\" + str(p\[0\]) + \"'\")" "'$gdb_prompt_fail '" \
 	 "prompt_hook argument is default prompt. 3"
 gdb_exit
 
-set GDBFLAGS [concat $tmp_gdbflags " -ex \"set target-async on\""]
-set GDBFLAGS [concat $GDBFLAGS " -ex \"set pagination off\""]
+set GDBFLAGS [concat $tmp_gdbflags " -ex \"set pagination off\""]
 set GDBFLAGS [concat $GDBFLAGS " -ex \"set editing on\""]
 set GDBFLAGS [concat $GDBFLAGS " -ex \"attach $testpid\""]
 set GDBFLAGS [concat $GDBFLAGS " -ex \"interrupt\""]
diff --git a/gdb/testsuite/gdb.reverse/break-precsave.exp b/gdb/testsuite/gdb.reverse/break-precsave.exp
index f1e6c69..3206e3c 100644
--- a/gdb/testsuite/gdb.reverse/break-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/break-precsave.exp
@@ -110,9 +110,3 @@ proc precsave_tests {} {
 }
 
 precsave_tests
-
-with_test_prefix "target-async" {
-    clean_restart $testfile
-    gdb_test_no_output "set target-async on"
-    precsave_tests
-}
diff --git a/gdb/testsuite/gdb.server/solib-list.exp b/gdb/testsuite/gdb.server/solib-list.exp
index 8cc3edc..4504a23 100644
--- a/gdb/testsuite/gdb.server/solib-list.exp
+++ b/gdb/testsuite/gdb.server/solib-list.exp
@@ -66,7 +66,6 @@ foreach nonstop { 0 1 } { with_test_prefix "non-stop $nonstop" {
     gdb_test "disconnect" ".*"
 
     gdb_test "set non-stop $nonstop"
-    gdb_test "set target-async $nonstop"
 
     # It is required for the non-stop mode, GDB would try to step over
     # _dl_debug_state breakpoint will still only ld.so loaded in gdbserver.
diff --git a/gdb/testsuite/gdb.threads/thread-specific-bp.exp b/gdb/testsuite/gdb.threads/thread-specific-bp.exp
index b8416d7..4273e1d 100644
--- a/gdb/testsuite/gdb.threads/thread-specific-bp.exp
+++ b/gdb/testsuite/gdb.threads/thread-specific-bp.exp
@@ -122,6 +122,5 @@ check_thread_specific_breakpoint "all-stop"
 clean_restart ${binfile}
 
 # Test non-stop mode.
-gdb_test_no_output "set target-async on" "set async mode"
 gdb_test_no_output "set non-stop on" "set non-stop mode"
 check_thread_specific_breakpoint "non-stop"
diff --git a/gdb/testsuite/lib/mi-support.exp b/gdb/testsuite/lib/mi-support.exp
index 9f07cda..f1b5749 100644
--- a/gdb/testsuite/lib/mi-support.exp
+++ b/gdb/testsuite/lib/mi-support.exp
@@ -1014,10 +1014,10 @@ proc mi_detect_async {} {
     global async
     global mi_gdb_prompt
 
-    send_gdb "show target-async\n"
+    send_gdb "show mi-async\n"
 
     gdb_expect {
-	-re ".*Controlling the inferior in asynchronous mode is on...*$mi_gdb_prompt$" {
+	-re "asynchronous mode is on...*$mi_gdb_prompt$" {
 	    set async 1
 	}
 	-re ".*$mi_gdb_prompt$" {