Remove gdb.hp

gdb/ChangeLog
2015-03-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* config/djgpp/README: Remove gdb.hp.

gdb/testsuite/ChangeLog
2015-03-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* Makefile.in (ALL_SUBDIRS): Remove gdb.hp.
	* README: Remove HP-UX and gdb.hp.
	(configuration):
	* configure: Regenerate.
	* configure.ac (AC_OUTPUT): Remove gdb.hp/Makefile,
	gdb.hp/gdb.objdbg/Makefile, gdb.hp/gdb.base-hp/Makefile,
	gdb.hp/gdb.aCC/Makefile, gdb.hp/gdb.compat/Makefile,
	gdb.hp/gdb.defects/Makefile.
	* gdb.hp/Makefile.in: File deleted.
	* gdb.hp/gdb.aCC/Makefile.in: File deleted.
	* gdb.hp/gdb.aCC/optimize.c: File deleted.
	* gdb.hp/gdb.aCC/optimize.exp: File deleted.
	* gdb.hp/gdb.aCC/run.c: File deleted.
	* gdb.hp/gdb.aCC/watch-cmd.exp: File deleted.
	* gdb.hp/gdb.base-hp/Makefile.in: File deleted.
	* gdb.hp/gdb.base-hp/callfwmall.c: File deleted.
	* gdb.hp/gdb.base-hp/callfwmall.exp: File deleted.
	* gdb.hp/gdb.base-hp/dollar.c: File deleted.
	* gdb.hp/gdb.base-hp/dollar.exp: File deleted.
	* gdb.hp/gdb.base-hp/genso-thresh.c: File deleted.
	* gdb.hp/gdb.base-hp/hwwatchbus.c: File deleted.
	* gdb.hp/gdb.base-hp/hwwatchbus.exp: File deleted.
	* gdb.hp/gdb.base-hp/pxdb.c: File deleted.
	* gdb.hp/gdb.base-hp/pxdb.exp: File deleted.
	* gdb.hp/gdb.base-hp/reg-pa64.exp: File deleted.
	* gdb.hp/gdb.base-hp/reg-pa64.s: File deleted.
	* gdb.hp/gdb.base-hp/reg.exp: File deleted.
	* gdb.hp/gdb.base-hp/reg.s: File deleted.
	* gdb.hp/gdb.base-hp/sized-enum.c: File deleted.
	* gdb.hp/gdb.base-hp/sized-enum.exp: File deleted.
	* gdb.hp/gdb.base-hp/so-thresh.exp: File deleted.
	* gdb.hp/gdb.base-hp/so-thresh.mk: File deleted.
	* gdb.hp/gdb.base-hp/so-thresh.sh: File deleted.
	* gdb.hp/gdb.compat/Makefile.in: File deleted.
	* gdb.hp/gdb.compat/average.c: File deleted.
	* gdb.hp/gdb.compat/sum.c: File deleted.
	* gdb.hp/gdb.compat/xdb.c: File deleted.
	* gdb.hp/gdb.compat/xdb0.c: File deleted.
	* gdb.hp/gdb.compat/xdb0.h: File deleted.
	* gdb.hp/gdb.compat/xdb1.c: File deleted.
	* gdb.hp/gdb.compat/xdb1.exp: File deleted.
	* gdb.hp/gdb.compat/xdb2.exp: File deleted.
	* gdb.hp/gdb.compat/xdb3.exp: File deleted.
	* gdb.hp/gdb.defects/Makefile.in: File deleted.
	* gdb.hp/gdb.defects/bs14602.c: File deleted.
	* gdb.hp/gdb.defects/bs14602.exp: File deleted.
	* gdb.hp/gdb.defects/solib-d.c: File deleted.
	* gdb.hp/gdb.defects/solib-d.exp: File deleted.
	* gdb.hp/gdb.defects/solib-d1.c: File deleted.
	* gdb.hp/gdb.defects/solib-d2.c: File deleted.
	* gdb.hp/gdb.objdbg/Makefile.in: File deleted.
	* gdb.hp/gdb.objdbg/objdbg01.exp: File deleted.
	* gdb.hp/gdb.objdbg/objdbg01/x1.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg01/x2.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg01/x3.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg01/x3.h: File deleted.
	* gdb.hp/gdb.objdbg/objdbg02.exp: File deleted.
	* gdb.hp/gdb.objdbg/objdbg02/x1.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg02/x2.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg02/x3.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg03.exp: File deleted.
	* gdb.hp/gdb.objdbg/objdbg03/x1.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg03/x2.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg03/x3.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg04.exp: File deleted.
	* gdb.hp/gdb.objdbg/objdbg04/x.h: File deleted.
	* gdb.hp/gdb.objdbg/objdbg04/x1.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg04/x2.cc: File deleted.
	* gdb.hp/gdb.objdbg/tools/symaddr: File deleted.
	* gdb.hp/gdb.objdbg/tools/symaddr.pa64: File deleted.
	* gdb.hp/gdb.objdbg/tools/test-objdbg.cc: File deleted.
	* gdb.hp/tools/odump: File deleted.

64 files changed, 0 insertions, 4995 deletions

diff --git a/gdb/testsuite/gdb.hp/Makefile.in b/gdb/testsuite/gdb.hp/Makefile.in
deleted file mode 100644
index 442dc44..0000000
--- a/gdb/testsuite/gdb.hp/Makefile.in
+++ /dev/null
@@ -1,42 +0,0 @@
-VPATH = @srcdir@
-srcdir = @srcdir@
-
-SUBDIRS = gdb.aCC gdb.base-hp gdb.compat gdb.defects gdb.objdbg
-
-all:
-	@echo "Nothing to be done for all..."
-
-info:
-install-info:
-dvi:
-install:
-uninstall: force
-installcheck:
-check:
-
-clean mostlyclean:
-	-rm -f *~ core *.o
-	-rm -f *.dwo *.dwp
-	if [ x"${SUBDIRS}" != x ] ; then \
-	    for dir in ${SUBDIRS}; \
-	    do \
-		    echo "$$dir:"; \
-		    if [ -d $$dir ]; then \
-			    (cd $$dir; $(MAKE) clean); \
-		    fi; \
-	    done ; \
-	else true; fi
-
-distclean maintainer-clean realclean: clean
-	-rm -f Makefile config.status config.log
-	-rm -f *-init.exp gdb.log gdb.sum
-	-rm -fr *.log summary detail *.plog *.sum *.psum site.*
-	if [ x"${SUBDIRS}" != x ] ; then \
-	    for dir in ${SUBDIRS}; \
-	    do \
-		    echo "$$dir:"; \
-		    if [ -d $$dir ]; then \
-			    (cd $$dir; $(MAKE) distclean); \
-		    fi; \
-	    done ; \
-	else true; fi
diff --git a/gdb/testsuite/gdb.hp/gdb.aCC/Makefile.in b/gdb/testsuite/gdb.hp/gdb.aCC/Makefile.in
deleted file mode 100644
index ff90963..0000000
--- a/gdb/testsuite/gdb.hp/gdb.aCC/Makefile.in
+++ /dev/null
@@ -1,25 +0,0 @@
-VPATH = @srcdir@
-srcdir = @srcdir@
-
-EXECUTABLES = exception namespace optimize run
-
-all:
-	@echo "Nothing to be done for all..."
-
-info:
-install-info:
-dvi:
-install:
-uninstall: force
-installcheck:
-check:
-
-clean mostlyclean:
-	-rm -f *~ *.o *.ci
-	-rm -f *.dwo *.dwp
-	-rm -f core $(EXECUTABLES)
-
-distclean maintainer-clean realclean: clean
-	-rm -f Makefile config.status config.log
-	-rm -f *-init.exp
-	-rm -fr *.log summary detail *.plog *.sum *.psum site.*
diff --git a/gdb/testsuite/gdb.hp/gdb.aCC/optimize.c b/gdb/testsuite/gdb.hp/gdb.aCC/optimize.c
deleted file mode 100644
index 2a8daa8..0000000
--- a/gdb/testsuite/gdb.hp/gdb.aCC/optimize.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/* Source for debugging optimimzed code test.
-
-    cc -g -O -o optimize optimize.c
-*/
-int callee();
-int test_opt;
-
-int main()
-{
-   int a,b,c,d,e,f,g,h;
-
-   a = 10;;
-
-   /* Value propagate
-    */
-   b = 2 * a + 1;
-   c = 3 * b + 2;
-
-   /* Re-use expressions
-    */
-   d = (2 * a + 1) * (3 * b + 2);
-   e = (2 * a + 1) * (3 * b + 2);
-
-   /* Create dead stores--do lines still exist?
-    */
-   d = (2 * a + 1) * (3 * b + 2);
-   e = (2 * a + 1) * (3 * b + 2);
-   d = (2 * a + 1) * (3 * b + 2);
-   e = (2 * a + 1) * (3 * b + 2);
-
-   /* Alpha and psi motion
-    */
-   if( test_opt ) {
-       f = e - d;
-       f = f--;
-   }
-   else {
-       f = e - d;
-       f = f + d * e;
-   }
-
-   /* Chi and Rho motion
-    */
-   h = 0;
-   do {
-       h++;
-       a = b * c + d * e;  /* Chi */
-       f = f + d * e;
-       g = f + d * e;      /* Rho */
-       callee( g+1 );
-       test_opt = (test_opt != 1);  /* Cycles */
-   } while( g && h < 10);
-
-   /* Opps for tail recursion, unrolling,
-    * folding, evaporating
-    */
-   for( a = 0; a < 100; a++ ) {
-       callee( callee ( callee( a )));
-       callee( callee ( callee( a )));
-       callee( callee ( callee( a )));
-   }
-
-   return callee( test_opt );
-}
-
-/* defined late to keep line numbers the same
-*/
-int callee( x )
-    int x;      /* not used! */
-{
-    test_opt++; /* side effect */
-
-    return test_opt;
-}
-
-/* end */
\ No newline at end of file
diff --git a/gdb/testsuite/gdb.hp/gdb.aCC/optimize.exp b/gdb/testsuite/gdb.hp/gdb.aCC/optimize.exp
deleted file mode 100644
index 60f34f7..0000000
--- a/gdb/testsuite/gdb.hp/gdb.aCC/optimize.exp
+++ /dev/null
@@ -1,143 +0,0 @@
-# Copyright (C) 1998-2015 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
-
-# optimize.exp -- Expect script for testing apps compiled with -O
-
-# There is no DOC support for gdb yet, return 0 for now.
-return 0
-
-global timeout
-
-# use this to debug:
-#
-#log_user 1
-
-if { [skip_hp_tests] } then { continue }
-
-set testfile optimize
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
-
-if [get_compiler_info] {
-    return -1
-}
-
- 
-if { $gcc_compiled } then { continue }
-
-
-# Vanilla -O, which is the same as +O2
-#
-if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug optimize=+O2}] != "" } {
-     untested optimize.exp
-     return -1
-}
-
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-
-send_gdb "file $binfile\n"
-gdb_expect {
-    -re ".*no debugging symbols found.*$gdb_prompt $" {
-        fail "Didn't find debug symbols; CHFts23488" 
-    }
-    -re ".*No header section (PXDB data).*$gdb_prompt $" {
-        fail "pointless warning"
-    }
-    -re ".*done.*$gdb_prompt $" {
-        pass "load debug symbols"
-    }
-    timeout { fail "timeout on file" }
-}
-
-# Two lines at the same place after opt.
-#
-gdb_test "b 28"   ".*"
-gdb_test "b 26"   ".*also set at.*" "same line"
-
-gdb_test "b 47"   ".*"
-gdb_test "b 48"   ".*also set at.*" "same line"
-
-gdb_test "tb main" ".*"
-
-set old_timeout $timeout
-set timeout [expr "$timeout + 200"]
-send_gdb "r\n"
-gdb_expect {
-    -re ".*No header section (PXDB data).*$gdb_prompt $" {
-        fail "pointless warning"
-    }
-    -re ".*main.*2\[12].*$gdb_prompt $" {
-        # All the lines before line 21 or 22 are 
-        # evaporated by the compiler.
-        # 
-        pass "hit main"
-    }
-    -re ".*$gdb_prompt $" {
-        fail "didn't hit main"
-    }
-    timeout { fail "timeout on run" }
-}
-set timeout $old_timeout
-
-gdb_test "c" ".*Breakpoint 1.*33.*"
-gdb_test "c" ".*51.*"
-gdb_test "cle" ".*Deleted breakpoints.*" "set 2, so del 2"
-
-gdb_test "b callee" ".*"
-gdb_test "c" ".*callee.*" "hit called rtn"
-
-gdb_exit
-
-# +O4, don't use -g
-#
-if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {optimize=+O4}] != "" } {
-     untested optimize.exp
-     return -1
-}
-
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-
-send_gdb "file $binfile\n"
-gdb_expect {
-    -re ".*no debugging symbols found.*$gdb_prompt $" {
-        pass "Didn't find debug symbols, as expected"
-    }
-    -re ".*No header section (PXDB data).*$gdb_prompt $" {
-        fail "pointless warning"
-    }
-    -re ".*done.*$gdb_prompt $" {
-        fail "Somehow found debug symbols--make this a pass?"
-    }
-    timeout { fail "timeout on file" }
-}
-
-gdb_test "b main"   ".*"
-gdb_test "b callee" ".*"
-gdb_test "r"        ".*Breakpoint 1.*main.*"
-gdb_test "si 3"     ".*main.*" "steps"
-gdb_test "x/4i \$pc" ".*main.*main+4.*main+8.*"
-gdb_test "c"        ".*callee.*" "hit bp"
-gdb_test "disas"    ".*callee.*callee+4.*callee+12.*"
-gdb_test "si"       ".*callee.*"
-gdb_test "fin"      ".*Run till exit.*main.*" "finish"
-gdb_test "x/i \$pc" ".*main+.*" "back in main"
-gdb_exit
-
-#remote_exec build "rm -f ${binfile}"
-return 0
diff --git a/gdb/testsuite/gdb.hp/gdb.aCC/run.c b/gdb/testsuite/gdb.hp/gdb.aCC/run.c
deleted file mode 100644
index 60cc08e..0000000
--- a/gdb/testsuite/gdb.hp/gdb.aCC/run.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *	This simple classical example of recursion is useful for
- *	testing stack backtraces and such.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-
-int main (int argc, char *argv[], char **envp)
-/*int argc;
-char *argv[], **envp;*/
-{
-    int factorial (int);
-#ifdef FAKEARGV
-    printf ("%d\n", factorial (1));
-#else    
-    if (argc != 2) {
-	printf ("usage:  factorial <number>\n");
-	return 1;
-    } else {
-	printf ("%d\n", factorial (atoi (argv[1])));
-    }
-#endif
-    return 0;
-}
-
-int factorial (int value)
-/*int value;*/
-{
-    int  local_var;
-
-    if (value > 1) {
-	value *= factorial (value - 1);
-    }
-    local_var = value;
-    return (value);
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.aCC/watch-cmd.exp b/gdb/testsuite/gdb.hp/gdb.aCC/watch-cmd.exp
deleted file mode 100644
index bdef945..0000000
--- a/gdb/testsuite/gdb.hp/gdb.aCC/watch-cmd.exp
+++ /dev/null
@@ -1,148 +0,0 @@
-# Copyright (C) 1998-2015 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-#
-# test special commands
-#
-
-if { [skip_hp_tests] } then { continue }
-
-set testfile "run"
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
-if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DFAKEARGV}] != "" } {
-     untested watch-cmd.exp
-     return -1
-
-}
-
-if [get_compiler_info] {
-    return -1
-}
-if { $gcc_compiled } then { continue }
-
-
-gdb_exit
-gdb_start
-delete_breakpoints
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-
-
-proc watchpoint_command_test {} {
-    global gdb_prompt
-
-    if [target_info exists noargs] { 
-        verbose "Skipping watchpoint_command_test because of noargs."
-        return
-    }
-
-    if { ![runto factorial] } then { gdb_suppress_tests }
-    # Don't depend upon argument passing, since most simulators don't currently
-    # support it.  Bash value variable to be what we want.
-    gdb_test "p value=6" "" "set value to 6 in watchpoint_command_test"
-    delete_breakpoints
-
-    # Verify that we can create a watchpoint, and give it a commands
-    # list that continues the inferior.  We set the watchpoint on a
-    # local variable, too, so that it self-deletes when the watched
-    # data goes out of scope.
-    #
-    # What should happen is: Each time the watchpoint triggers, it
-    # continues the inferior.  Eventually, the watchpoint will self-
-    # delete, when the watched variable is out of scope.  But by that
-    # time, the inferior should have exited.  GDB shouldn't crash or
-    # anything untoward as a result of this.
-    #
-    send_gdb "watch local_var\n"
-    gdb_expect {
-      -re ".*\[Ww\]atchpoint (\[0-9\]*): local_var.*$gdb_prompt $"\
-              { pass "watch local_var"
-                set wp_id $expect_out(1,string)
-                send_gdb "commands $wp_id\n"
-                gdb_expect {
-                  -re "Type commands for when breakpoint $wp_id is hit, one per line.*>"\
-                          { pass "begin commands on watch"}
-                  -re "$gdb_prompt $"\
-                          {fail "begin commands on watch"}
-                  timeout {fail "(timeout) begin commands on watch"}
-                }
-              }
-    -re "$gdb_prompt $"\
-              {fail "watch local_var"}
-      timeout {fail "(timeout) watch local_var"}
-    }
-#    set wp_id $expect_out(1,string)
-#    send_gdb "commands $wp_id\n"
-#    gdb_expect {
-#      -re "Type commands for when breakpoint $wp_id is hit, one per line.*>"\
-#              {pass "begin commands on watch"}
-#      -re "$gdb_prompt $"\
-#              {fail "begin commands on watch"}
-#      timeout {fail "(timeout) begin commands on watch"}
-#    }
-    send_gdb "print value\n"
-    gdb_expect {
-      -re ">"\
-              {pass "add print command to watch"}
-      -re "$gdb_prompt $"\
-              {fail "add print command to watch"}
-      timeout {fail "(timeout) add print command to watch"}
-    }
-    send_gdb "continue\n"
-    gdb_expect {
-      -re ">"\
-              {pass "add continue command to watch"}
-      -re "$gdb_prompt $"\
-              {fail "add continue command to watch"}
-      timeout {fail "(timeout) add continue command to watch"}
-    }
-    send_gdb "end\n"
-    gdb_expect {
-      -re "$gdb_prompt $"\
-              {pass "begin commands on watch"}
-      timeout {fail "(timeout) begin commands on watch"}
-    }
-    send_gdb "continue\n"
-    gdb_expect {
-      -re "Continuing.*\[Ww\]atchpoint $wp_id deleted because the program has left the block in.*which its expression is valid.*in main.*$gdb_prompt $"\
-              {pass "continue with watch"}
-      -re "$gdb_prompt $"\
-              {fail "continue with watch"}
-      timeout {fail "(timeout) continue with watch"}
-    }
-    send_gdb "continue\n"
-    gdb_expect {
-      -re "Continuing.*$gdb_prompt $"\
-              {pass "continue until exit"}
-      -re "$gdb_prompt $"\
-              {fail "continue until exit"}
-      timeout {fail "(timeout) continue until exit"}
-    }
-}
-
-watchpoint_command_test
-
-
-
-
-
-
-
-
-
-
-
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/Makefile.in b/gdb/testsuite/gdb.hp/gdb.base-hp/Makefile.in
deleted file mode 100644
index 633266a..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/Makefile.in
+++ /dev/null
@@ -1,30 +0,0 @@
-VPATH = @srcdir@
-srcdir = @srcdir@
-
-EXECUTABLES = dollar hwwatchbus.bak pxdb reg reg-pa64 \
-	so-thresh genso-thresh sized-enum
-
-MISCELLANEOUS = so-thresh.c so-thresh.lopt so-thresh.make.out \
-	lib*-so-thresh.*
-
-all:
-	@echo "Nothing to be done for all..."
-
-info:
-install-info:
-dvi:
-install:
-uninstall: force
-installcheck:
-check:
-
-clean mostlyclean:
-	-rm -f *~ *.o *.ci
-	-rm -f *.dwo *.dwp
-	-rm -f core $(EXECUTABLES)
-	-rm -f $(MISCELLANEOUS)
-
-distclean maintainer-clean realclean: clean
-	-rm -f Makefile config.status config.log
-	-rm -f *-init.exp
-	-rm -fr *.log summary detail *.plog *.sum *.psum site.*
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/callfwmall.c b/gdb/testsuite/gdb.hp/gdb.base-hp/callfwmall.c
deleted file mode 100644
index f22a248..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/callfwmall.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/* Support program for testing gdb's ability to call functions
-   in an inferior which doesn't itself call malloc, pass appropriate
-   arguments to those functions, and get the returned result. */
-
-#ifdef NO_PROTOTYPES
-#define PARAMS(paramlist) ()
-#else
-#define PARAMS(paramlist) paramlist
-#endif
-
-# include <string.h>
-
-char char_val1 = 'a';
-char char_val2 = 'b';
-
-short short_val1 = 10;
-short short_val2 = -23;
-
-int int_val1 = 87;
-int int_val2 = -26;
-
-long long_val1 = 789;
-long long_val2 = -321;
-
-float float_val1 = 3.14159;
-float float_val2 = -2.3765;
-
-double double_val1 = 45.654;
-double double_val2 = -67.66;
-
-#define DELTA (0.001)
-
-char *string_val1 = (char *)"string 1";
-char *string_val2 = (char *)"string 2";
-
-char char_array_val1[] = "carray 1";
-char char_array_val2[] = "carray 2";
-
-struct struct1 {
-  char c;
-  short s;
-  int i;
-  long l;
-  float f;
-  double d;
-  char a[4];
-} struct_val1 = { 'x', 87, 76, 51, 2.1234, 9.876, "foo" };
-
-/* Some functions that can be passed as arguments to other test
-   functions, or called directly. */
-#ifdef PROTOTYPES
-int add (int a, int b)
-#else
-int add (a, b) int a, b;
-#endif
-{
-  return (a + b);
-}
-
-#ifdef PROTOTYPES
-int doubleit (int a)
-#else
-int doubleit (a)
-int a;
-#endif
-{
-  return (a + a);
-}
-
-int (*func_val1) PARAMS((int,int)) = add;
-int (*func_val2) PARAMS((int)) = doubleit;
-
-/* An enumeration and functions that test for specific values. */
-
-enum enumtype { enumval1, enumval2, enumval3 };
-enum enumtype enum_val1 = enumval1;
-enum enumtype enum_val2 = enumval2;
-enum enumtype enum_val3 = enumval3;
-
-#ifdef PROTOTYPES
-int t_enum_value1 (enum enumtype enum_arg)
-#else
-t_enum_value1 (enum_arg)
-enum enumtype enum_arg;
-#endif
-{
-  return (enum_arg == enum_val1);
-}
-
-#ifdef PROTOTYPES
-int t_enum_value2 (enum enumtype enum_arg)
-#else
-t_enum_value2 (enum_arg)
-enum enumtype enum_arg;
-#endif
-{
-  return (enum_arg == enum_val2);
-}
-
-#ifdef PROTOTYPES
-int t_enum_value3 (enum enumtype enum_arg)
-#else
-t_enum_value3 (enum_arg)
-enum enumtype enum_arg;
-#endif
-{
-  return (enum_arg == enum_val3);
-}
-
-/* A function that takes a vector of integers (along with an explicit
-   count) and returns their sum. */
-
-#ifdef PROTOTYPES
-int sum_args (int argc, int argv[])
-#else
-int sum_args (argc, argv)
-int argc;
-int argv[];
-#endif
-{
-  int sumval = 0;
-  int idx;
-
-  for (idx = 0; idx < argc; idx++)
-    {
-      sumval += argv[idx];
-    }
-  return (sumval);
-}
-
-/* Test that we can call functions that take structs and return
-   members from that struct */
-
-#ifdef PROTOTYPES
-char   t_structs_c (struct struct1 tstruct) { return (tstruct.c); }
-short  t_structs_s (struct struct1 tstruct) { return (tstruct.s); }
-int    t_structs_i (struct struct1 tstruct) { return (tstruct.i); }
-long   t_structs_l (struct struct1 tstruct) { return (tstruct.l); }
-float  t_structs_f (struct struct1 tstruct) { return (tstruct.f); }
-double t_structs_d (struct struct1 tstruct) { return (tstruct.d); }
-char  *t_structs_a (struct struct1 tstruct)
-{
-  static char buf[8];
-  strcpy (buf, tstruct.a);
-  return buf;
-}
-#else
-char   t_structs_c (tstruct) struct struct1 tstruct; { return (tstruct.c); }
-short  t_structs_s (tstruct) struct struct1 tstruct; { return (tstruct.s); }
-int    t_structs_i (tstruct) struct struct1 tstruct; { return (tstruct.i); }
-long   t_structs_l (tstruct) struct struct1 tstruct; { return (tstruct.l); }
-float  t_structs_f (tstruct) struct struct1 tstruct; { return (tstruct.f); }
-double t_structs_d (tstruct) struct struct1 tstruct; { return (tstruct.d); }
-char  *t_structs_a (tstruct) struct struct1 tstruct;
-{
-  static char buf[8];
-  strcpy (buf, tstruct.a);
-  return buf;
-}
-#endif
-
-/* Test that calling functions works if there are a lot of arguments.  */
-#ifdef PROTOTYPES
-int sum10 (int i0, int i1, int i2, int i3, int i4, int i5, int i6, int i7, int i8, int i9)
-#else
-int
-sum10 (i0, i1, i2, i3, i4, i5, i6, i7, i8, i9)
-     int i0, i1, i2, i3, i4, i5, i6, i7, i8, i9;
-#endif
-{
-  return i0 + i1 + i2 + i3 + i4 + i5 + i6 + i7 + i8 + i9;
-}
-
-/* Gotta have a main to be able to generate a linked, runnable
-   executable, and also provide a useful place to set a breakpoint. */
-
-#ifdef PROTOTYPES
-int main()
-#else
-main ()
-#endif
-{
-  t_structs_c(struct_val1);
-  return 0;
-  
-}
-
-/* Functions that expect specific values to be passed and return 
-   either 0 or 1, depending upon whether the values were
-   passed incorrectly or correctly, respectively. */
-
-#ifdef PROTOTYPES
-int t_char_values (char char_arg1, char char_arg2)
-#else
-int t_char_values (char_arg1, char_arg2)
-char char_arg1, char_arg2;
-#endif
-{
-  return ((char_arg1 == char_val1) && (char_arg2 == char_val2));
-}
-
-int
-#ifdef PROTOTYPES
-t_small_values (char arg1, short arg2, int arg3, char arg4, short arg5,
-		char arg6, short arg7, int arg8, short arg9, short arg10)
-#else
-t_small_values (arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9, arg10)
-     char arg1;
-     short arg2;
-     int arg3;
-     char arg4;
-     short arg5;
-     char arg6;
-     short arg7;
-     int arg8;
-     short arg9;
-     short arg10;
-#endif
-{
-  return arg1 + arg2 + arg3 + arg4 + arg5 + arg6 + arg7 + arg8 + arg9 + arg10;
-}
-
-#ifdef PROTOTYPES
-int t_short_values (short short_arg1, short short_arg2)
-#else
-int t_short_values (short_arg1, short_arg2)
-short short_arg1, short_arg2;
-#endif
-{
-  return ((short_arg1 == short_val1) && (short_arg2 == short_val2));
-}
-
-#ifdef PROTOTYPES
-int t_int_values (int int_arg1, int int_arg2)
-#else
-int t_int_values (int_arg1, int_arg2)
-int int_arg1, int_arg2;
-#endif
-{
-  return ((int_arg1 == int_val1) && (int_arg2 == int_val2));
-}
-
-#ifdef PROTOTYPES
-int t_long_values (long long_arg1, long long_arg2)
-#else
-int t_long_values (long_arg1, long_arg2)
-long long_arg1, long_arg2;
-#endif
-{
-  return ((long_arg1 == long_val1) && (long_arg2 == long_val2));
-}
-
-/* NOTE: THIS FUNCTION MUST NOT BE PROTOTYPED!!!!!
-   There must be one version of "t_float_values" (this one)
-   that is not prototyped, and one (if supported) that is (following).
-   That way GDB can be tested against both cases.  */
-   
-int t_float_values (float_arg1, float_arg2)
-float float_arg1, float_arg2;
-{
-  return ((float_arg1 - float_val1) < DELTA
-	  && (float_arg1 - float_val1) > -DELTA
-	  && (float_arg2 - float_val2) < DELTA
-	  && (float_arg2 - float_val2) > -DELTA);
-}
-
-int
-#ifdef NO_PROTOTYPES
-/* In this case we are just duplicating t_float_values, but that is the
-   easiest way to deal with either ANSI or non-ANSI.  */
-t_float_values2 (float_arg1, float_arg2)
-     float float_arg1, float_arg2;
-#else
-t_float_values2 (float float_arg1, float float_arg2)
-#endif
-{
-  return ((float_arg1 - float_val1) < DELTA
-	  && (float_arg1 - float_val1) > -DELTA
-	  && (float_arg2 - float_val2) < DELTA
-	  && (float_arg2 - float_val2) > -DELTA);
-}
-
-#ifdef PROTOTYPES
-int t_double_values (double double_arg1, double double_arg2)
-#else
-int t_double_values (double_arg1, double_arg2)
-double double_arg1, double_arg2;
-#endif
-{
-  return ((double_arg1 - double_val1) < DELTA
-	  && (double_arg1 - double_val1) > -DELTA
-	  && (double_arg2 - double_val2) < DELTA
-	  && (double_arg2 - double_val2) > -DELTA);
-}
-
-#ifdef PROTOTYPES
-int t_string_values (char *string_arg1, char *string_arg2)
-#else
-int t_string_values (string_arg1, string_arg2)
-char *string_arg1, *string_arg2;
-#endif
-{
-  return (!strcmp (string_arg1, string_val1) &&
-	  !strcmp (string_arg2, string_val2));
-}
-
-#ifdef PROTOTYPES
-int t_char_array_values (char char_array_arg1[], char char_array_arg2[])
-#else
-int t_char_array_values (char_array_arg1, char_array_arg2)
-char char_array_arg1[], char_array_arg2[];
-#endif
-{
-  return (!strcmp (char_array_arg1, char_array_val1) &&
-	  !strcmp (char_array_arg2, char_array_val2));
-}
-
-
-/* This used to simply compare the function pointer arguments with
-   known values for func_val1 and func_val2.  Doing so is valid ANSI
-   code, but on some machines (RS6000, HPPA, others?) it may fail when
-   called directly by GDB.
-
-   In a nutshell, it's not possible for GDB to determine when the address
-   of a function or the address of the function's stub/trampoline should
-   be passed.
-
-   So, to avoid GDB lossage in the common case, we perform calls through the
-   various function pointers and compare the return values.  For the HPPA
-   at least, this allows the common case to work.
-
-   If one wants to try something more complicated, pass the address of
-   a function accepting a "double" as one of its first 4 arguments.  Call
-   that function indirectly through the function pointer.  This would fail
-   on the HPPA.  */
-
-#ifdef PROTOTYPES
-int t_func_values (int (*func_arg1)(int, int), int (*func_arg2)(int))
-#else
-int t_func_values (func_arg1, func_arg2)
-int (*func_arg1) PARAMS ((int, int));
-int (*func_arg2) PARAMS ((int));
-#endif
-{
-  return ((*func_arg1) (5,5)  == (*func_val1) (5,5)
-          && (*func_arg2) (6) == (*func_val2) (6));
-}
-
-#ifdef PROTOTYPES
-int t_call_add (int (*func_arg1)(int, int), int a, int b)
-#else
-int t_call_add (func_arg1, a, b)
-int (*func_arg1) PARAMS ((int, int));
-int a, b;
-#endif
-{
-  return ((*func_arg1)(a, b));
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/callfwmall.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/callfwmall.exp
deleted file mode 100644
index 9846bb4..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/callfwmall.exp
+++ /dev/null
@@ -1,334 +0,0 @@
-# Copyright 1997-2015 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
-
-# This file was written by Fred Fish. (fnf@cygnus.com)
-
-# These tests are the same as those in callfuncs.exp, except that the
-# test program here does not call malloc.
-#
-# "What in the world does malloc have to do with calling functions in
-# the inferior?"  Well, nothing.  GDB's ability to invoke a function
-# in the inferior program works just fine in programs that have no
-# malloc function available.  It doesn't rely on the inferior's
-# malloc, directly or indirectly.  It just uses the inferior's stack
-# space.
-#
-# "Then what's the point of this test file?"  Well, it just so happens
-# that this file, in addition to testing inferior function calls, also
-# tests GDB's ability to evaluate string literals (like "string 1" and
-# "string 2" in the tests below).  Evaluating *those* sorts of
-# expressions does require malloc.
-#
-# (As an extension to C, GDB also has a syntax for literal arrays of
-# anything, not just characters.  For example, the expression
-# {2,3,4,5} (which appears in the tests below) evaluates to an array
-# of four ints.  So rather than talking just about string literals,
-# we'll use the broader term "array literals".)
-#
-# Now, in this file, we only evaluate array literals when we're about
-# to pass them to a function, but don't be confused --- this is a red
-# herring.  You can evaluate "abcdef" even if you're not about to pass
-# that to a function, and doing so requires malloc even if you're just
-# going to store a pointer to it in a variable, like this:
-#
-#    (gdb) ptype s
-#    type = char *
-#    (gdb) set variable s = "abcdef"
-#
-# According to C's rules for evaluating expressions, arrays are
-# converted into pointers to their first element.  This means that, in
-# order to evaluate an expression like "abcdef", GDB needs to actually
-# find some memory in the inferior we can plop the characters into;
-# then we use that memory's address as the address of our array
-# literal.  GDB finds this memory by calling the inferior's malloc
-# function, if it has one.  So, evaluating an array literal depends on
-# performing an inferior function call, but not vice versa.  (GDB
-# can't just allocate the space on the stack; the pointer may remain
-# live long after the current frame has been popped.)
-#
-# "But, if evaluating array literals requires malloc, what's the point
-# of testing that GDB can do so in a program that doesn't have malloc?
-# It can't work!"  On most systems, that's right, but HP-UX has some
-# sort of dynamic linking magic that ensures that *every* program has
-# malloc.  So on HP-UX, GDB can evaluate array literals even in
-# inferior programs that don't use malloc.  That's why this test is in
-# gdb.hp.
-# 
-# This file has, for some reason, led to well more than its fair share
-# of misunderstandings about the relationship between array literal
-# expressions and inferior function calls.  Folks talk as if you can
-# only evaluate array literals when you're about to pass them to a
-# function.  I think they're assuming that, since GDB is constructing
-# a new frame on the inferior's stack (correct), it's going to use
-# that space for the array literals (incorrect).  Remember that those
-# array literals may need to be live long after the inferior function
-# call returns; GDB can't tell.
-#
-# What makes the confusion worse is that there *is* a relationship
-# between array literals and inferior function calls --- GDB uses
-# inferior function calls to evaluate array literals.  But many people
-# jump to other, incorrect conclusions about this.
-
-
-if { [skip_hp_tests] } then { continue }
-
-set testfile "callfwmall"
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
-
-if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
-     untested callfwmall.exp
-     return -1
-}
-
-# Create and source the file that provides information about the compiler
-# used to compile the test case.
-
-if [get_compiler_info] {
-    return -1
-}
-
-if {$hp_aCC_compiler} {
-    set prototypes 1
-} else {
-    set prototypes 0
-}
-
-
-# Some targets can't call functions, so don't even bother with this
-# test.
-if [target_info exists gdb,cannot_call_functions] {
-    setup_xfail "*-*-*" 2416
-    fail "This target can not call functions"
-    continue
-}
-
-# Set the current language to C.  This counts as a test.  If it
-# fails, then we skip the other tests.
-
-proc set_lang_c {} {
-    global gdb_prompt
-
-    send_gdb "set language c\n"
-    gdb_expect {
-	-re ".*$gdb_prompt $" {}
-	timeout { fail "set language c (timeout)" ; return 0 }
-    }
-
-    send_gdb "show language\n"
-    gdb_expect {
-	-re ".* source language is \"c\".*$gdb_prompt $" {
-	    pass "set language to \"c\""
-	    return 1
-	}
-	-re ".*$gdb_prompt $" {
-	    fail "setting language to \"c\""
-	    return 0
-	}
-	timeout {
-	    fail "can't show language (timeout)"
-	    return 0
-	}
-    }
-}
-
-# FIXME:  Before calling this proc, we should probably verify that
-# we can call inferior functions and get a valid integral value
-# returned.
-# Note that it is OK to check for 0 or 1 as the returned values, because C
-# specifies that the numeric value of a relational or logical expression
-# (computed in the inferior) is 1 for true and 0 for false.
-
-proc do_function_calls {} {
-    global prototypes
-    global gcc_compiled
-    global gdb_prompt
-
-    # We need to up this because this can be really slow on some boards.
-    set timeout 60
-
-    gdb_test "p t_char_values(0,0)" " = 0"
-    gdb_test "p t_char_values('a','b')" " = 1"
-    gdb_test "p t_char_values(char_val1,char_val2)" " = 1"
-    gdb_test "p t_char_values('a',char_val2)" " = 1"
-    gdb_test "p t_char_values(char_val1,'b')" " = 1"
-
-    gdb_test "p t_short_values(0,0)" " = 0"
-    gdb_test "p t_short_values(10,-23)" " = 1"
-    gdb_test "p t_short_values(short_val1,short_val2)" " = 1"
-    gdb_test "p t_short_values(10,short_val2)" " = 1"
-    gdb_test "p t_short_values(short_val1,-23)" " = 1"
-
-    gdb_test "p t_int_values(0,0)" " = 0"
-    gdb_test "p t_int_values(87,-26)" " = 1"
-    gdb_test "p t_int_values(int_val1,int_val2)" " = 1"
-    gdb_test "p t_int_values(87,int_val2)" " = 1"
-    gdb_test "p t_int_values(int_val1,-26)" " = 1"
-
-    gdb_test "p t_long_values(0,0)" " = 0"
-    gdb_test "p t_long_values(789,-321)" " = 1"
-    gdb_test "p t_long_values(long_val1,long_val2)" " = 1"
-    gdb_test "p t_long_values(789,long_val2)" " = 1"
-    gdb_test "p t_long_values(long_val1,-321)" " = 1"
-
-    if ![target_info exists gdb,skip_float_tests] {
-	gdb_test "p t_float_values(0.0,0.0)" " = 0"
-
-	# These next four tests fail on the mn10300.
-	# The first value is passed in regs, the other in memory.
-	# Gcc emits different stabs for the two parameters; the first is
-	# claimed to be a float, the second a double.
-	# dbxout.c in gcc claims this is the desired behavior.
-	setup_xfail "mn10300-*-*"
-	gdb_test "p t_float_values(3.14159,-2.3765)" " = 1"
-	setup_xfail "mn10300-*-*"
-	gdb_test "p t_float_values(float_val1,float_val2)" " = 1"
-	setup_xfail "mn10300-*-*"
-	gdb_test "p t_float_values(3.14159,float_val2)" " = 1"
-	setup_xfail "mn10300-*-*"
-	gdb_test "p t_float_values(float_val1,-2.3765)" " = 1"
-
-	# Test passing of arguments which might not be widened.
-	gdb_test "p t_float_values2(0.0,0.0)" " = 0"
-
-	# Although PR 5318 mentions SunOS specifically, this seems
-	# to be a generic problem on quite a few platforms.
-	if $prototypes then {
-	    setup_xfail "sparc-*-*" "mips*-*-*" 5318
-	    if {!$gcc_compiled} then {
-		setup_xfail "i*86-*-sysv4*" 5318
-	    }
-	}
-	gdb_test "p t_float_values2(3.14159,float_val2)" " = 1"
-	gdb_test "p t_small_values(1,2,3,4,5,6,7,8,9,10)" " = 55"
-
-	gdb_test "p t_double_values(0.0,0.0)" " = 0"
-	gdb_test "p t_double_values(45.654,-67.66)" " = 1"
-	gdb_test "p t_double_values(double_val1,double_val2)" " = 1"
-	gdb_test "p t_double_values(45.654,double_val2)" " = 1"
-	gdb_test "p t_double_values(double_val1,-67.66)" " = 1"
-   
-    }
-
-    gdb_test "p t_string_values(string_val2,string_val1)" " = 0"
-    gdb_test "p t_string_values(string_val1,string_val2)" " = 1"
-    gdb_test "p t_string_values(\"string 1\",\"string 2\")" " = 1"
-    gdb_test "p t_string_values(\"string 1\",string_val2)" " = 1"
-    gdb_test "p t_string_values(string_val1,\"string 2\")" " = 1"
-
-    gdb_test "p t_char_array_values(char_array_val2,char_array_val1)" " = 0"
-    gdb_test "p t_char_array_values(char_array_val1,char_array_val2)" " = 1"
-    gdb_test "p t_char_array_values(\"carray 1\",\"carray 2\")" " = 1"
-    gdb_test "p t_char_array_values(\"carray 1\",char_array_val2)" " = 1"
-    gdb_test "p t_char_array_values(char_array_val1,\"carray 2\")" " = 1"
-
-    gdb_test "p doubleit(4)" " = 8"
-    gdb_test "p add(4,5)" " = 9"
-    gdb_test "p t_func_values(func_val2,func_val1)" " = 0"
-    gdb_test "p t_func_values(func_val1,func_val2)" " = 1"
-
-    # On the rs6000, we need to pass the address of the trampoline routine,
-    # not the address of add itself.  I don't know how to go from add to
-    # the address of the trampoline.  Similar problems exist on the HPPA,
-    # and in fact can present an unsolvable problem as the stubs may not
-    # even exist in the user's program.  We've slightly recoded t_func_values
-    # to avoid such problems in the common case.  This may or may not help
-    # the RS6000.
-    setup_xfail "rs6000*-*-*"
-
-    if {![istarget hppa*-*-hpux*]} then {
-	gdb_test "p t_func_values(add,func_val2)" " = 1"
-    }
-
-    setup_xfail "rs6000*-*-*"
-
-    if {![istarget hppa*-*-hpux*]} then {
-	gdb_test "p t_func_values(func_val1,doubleit)" " = 1"
-    }
-
-    gdb_test "p t_call_add(func_val1,3,4)" " = 7"
-
-    setup_xfail "rs6000*-*-*"
-
-    if {![istarget hppa*-*-hpux*]} then {
-	gdb_test "p t_call_add(add,3,4)" " = 7"
-    }
-    
-    gdb_test "p t_enum_value1(enumval1)" " = 1"
-    gdb_test "p t_enum_value1(enum_val1)" " = 1"
-    gdb_test "p t_enum_value1(enum_val2)" " = 0"
-
-    gdb_test "p t_enum_value2(enumval2)" " = 1"
-    gdb_test "p t_enum_value2(enum_val2)" " = 1"
-    gdb_test "p t_enum_value2(enum_val1)" " = 0"
-
-    gdb_test "p sum_args(1,{2})" " = 2"
-    gdb_test "p sum_args(2,{2,3})" " = 5"
-    gdb_test "p sum_args(3,{2,3,4})" " = 9"
-    gdb_test "p sum_args(4,{2,3,4,5})" " = 14"
-    gdb_test "p sum10 (1, 2, 3, 4, 5, 6, 7, 8, 9, 10)" " = 55"
-
-    gdb_test "p t_structs_c(struct_val1)" "= 120 'x'" \
-	"call inferior func with struct - returns char"
-    gdb_test "p t_structs_s(struct_val1)" "= 87" \
-	"call inferior func with struct -  returns short"
-    gdb_test "p t_structs_i(struct_val1)" "= 76" \
-	"call inferior func with struct - returns int"
-    gdb_test "p t_structs_l(struct_val1)" "= 51" \
-	"call inferior func with struct - returns long"
-    gdb_test "p t_structs_f(struct_val1)" "= 2.12.*" \
-	"call inferior func with struct - returns float"
-    gdb_test "p t_structs_d(struct_val1)" "= 9.87.*" \
-	"call inferior func with struct - returns double"
-    gdb_test "p t_structs_a(struct_val1)" "= (.unsigned char .. )?\"foo\"" \
-	"call inferior func with struct - returns char *"
-
-}
-
-# Start with a fresh gdb.
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-gdb_test "set print sevenbit-strings" ""
-gdb_test "set print address off" ""
-gdb_test "set width 0" ""
-
-if { $hp_aCC_compiler } {
-    # Do not set language explicitly to 'C'.  This will cause aCC
-    # tests to fail because promotion rules are different.  Just let
-    # the language be set to the default.
-
-    if { ![runto_main] } {
-	gdb_suppress_tests
-    }
-
-    gdb_test "set overload-resolution 0" ".*"
-} else {
-    if { ![set_lang_c] } {
-	gdb_suppress_tests
-    } else {
-	if { ![runto_main] } {
-	    gdb_suppress_tests
-	}
-    }
-}
-
-gdb_test "next" ".*"
-do_function_calls
-
-return 0
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/dollar.c b/gdb/testsuite/gdb.hp/gdb.base-hp/dollar.c
deleted file mode 100644
index 8fd9893..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/dollar.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifdef PROTOTYPES
-int main (int argc, char **argv)
-#else
-main (argc, argv, envp)
-     int argc;
-     char **argv;
-#endif
-{
-    return 0;
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/dollar.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/dollar.exp
deleted file mode 100644
index 98b9664..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/dollar.exp
+++ /dev/null
@@ -1,146 +0,0 @@
-#   Copyright (C) 1997-2015 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# GDB tests for names beginning with '$'
-
-# This is aimed at HP-UX systems where a lot of system
-# routines and names begin with '$' or '$$'.  GDB 4.16 was
-# unable to deal with these names as they clashed with
-# convenience variables.  Wildebeest should accept such
-# names in preference to convenience variables.
-
-# This file was written by Satish Pai <pai@apollo.hp.com>
-# 1997-09-24
-
-#
-# test running programs
-#
-
-if { [skip_hp_tests] } { continue }
-
-set testfile "dollar"
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
-
-if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
-     untested dollar.exp
-     return -1
-}
-
-#source ${binfile}.ci
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-#
-# set it up at a breakpoint so we can play with the variable values
-#
-
-if ![runto_main] then {
-    perror "couldn't run to breakpoint"
-    continue
-}
-
-# Test for millicode routines
-# hppa64 does not support dyncall
-if ![istarget "hppa64*-*-*"] {
-send_gdb "print \$\$dyncall\n"   
-gdb_expect {   
-   -re "\\$\[0-9\]* = \\{<text variable, no debug info>\\} $hex <>.*$gdb_prompt $" { pass "print \$\$dyncall" }
-   -re "\\$\[0-9\]* = \\{<text variable, no debug info>\\} $hex <.*dyncall>.*$gdb_prompt $" { pass "print \$\$dyncall" }
-   -re "\\$\[0-9\]* = void"            { fail "print \$\$dyncall -- interpreted as convenience var" }
-   -re "$gdb_prompt $"                     { fail "print \$\$dyncall" }
-   timeout                             { fail "(timeout) print \$\$dyncall" }
-}
-send_gdb "print \$\$dyncall_external\n"   
-gdb_expect {   
-   -re "\\$\[0-9\]* = \\{<text variable, no debug info>\\} $hex <>.*$gdb_prompt $" { pass "print \$\$dyncall_external" }
-	-re "\\$\[0-9\]* = \\{<text variable, no debug info>\\} $hex <.*dyncall_external>.*$gdb_prompt $" { pass "print \$\$dyncall_external" }
-   -re "\\$\[0-9\]* = void"            { fail "print \$\$dyncall_external -- interpreted as convenience var" }
-   -re "$gdb_prompt $"                     { fail "print \$\$dyncall_external" }
-   timeout                             { fail "(timeout) print \$\$dyncall_external" }
-}
-
-# Set a breakpoint on a millicode routine
-send_gdb "break \$\$dyncall\n"   
-gdb_expect {   
-   -re "Breakpoint \[0-9\]* at $hex.*$gdb_prompt $" { pass "break \$\$dyncall" }
-   -re "Function.*not defined.*$gdb_prompt $" {fail "break \$\$dyncall -- no \$\$dyncall?" }
-   -re "Convenience variables used in line specs must have integer values\\..*$gdb_prompt $" {
-             fail "break \$\$dyncall -- treated as convenince variable"
-       }          
-   -re "$gdb_prompt $"                     { fail "print break \$\$dyncall" }
-   timeout                             { fail "(timeout) print break \$\$dyncall" }
-}
-
-# Disassemble $$dyncall
-send_gdb "disassemble \$\$dyncall\n"   
-gdb_expect {   
-   -re "Dump of assembler code for function.*$gdb_prompt $" { pass "disas \$\$dyncall" }
-   -re "$gdb_prompt $"                     { fail "disas \$\$dyncall" }
-   timeout                             { fail "(timeout) disas \$\$dyncall" }
-}
-
-# Try to set $$dyncall like a convenience var.
-send_gdb "set \$\$dyncall = 77\n"   
-gdb_expect {   
-   -re "Invalid cast.*$gdb_prompt $" { pass "set \$\$dyncall = 77" }
-   -re "$gdb_prompt $"                     { fail "set \$\$dyncall = 77" }
-   timeout                             { fail "(timeout) set \$\$dyncall = 77" }
-}
-}
-
-# Try out some other $ name, not millicode
-if [istarget "hppa64*-*-*"] {
-    #hppa64 uses __argv instead of $ARGV.
-    send_gdb "print \__argv\n"   
-    gdb_expect {   
-        -re "\\$\[0-9\]* = \[0-9\]*.*$gdb_prompt $" { pass "print \__argv" }
-        -re "\\$\[0-9\]* = void.*$gdb_prompt $" {
-	    fail "print \__argv (interpreted as convenience var)"
-	}
-        -re "$gdb_prompt $" { fail "print \__argv" }
-        timeout { fail "(timeout) print \__argv" }
-    }
-
-    send_gdb "ptype \__argv\n"   
-    gdb_expect {   
-        -re "type = <data variable, no debug info>.*$gdb_prompt $" {
-	    pass "ptype \__argv"
-	}
-        -re "type = void.*$gdb_prompt $" {
-	    fail "ptype \__argv (interpreted as convenience var)"
-	}
-        -re "$gdb_prompt $" { fail "ptype \__argv" }
-        timeout { fail "(timeout) ptype \__argv" }
-    }
-} else {
-send_gdb "print \$ARGV\n"   
-gdb_expect {   
-   -re "\\$\[0-9\]* = \[0-9\]*.*$gdb_prompt $" { pass "print \$ARGV" }
-   -re "\\$\[0-9\]* = void.*$gdb_prompt $" { fail "print \$ARGV (interpreted as convenience var)" }
-   -re "$gdb_prompt $"                     { fail "print \$ARGV" }
-   timeout                             { fail "(timeout) print \$ARGV" }
-}
-send_gdb "ptype \$ARGV\n"   
-gdb_expect {   
-   -re "type = <data variable, no debug info>.*$gdb_prompt $" { pass "ptype \$ARGV" }
-   -re "type = void.*$gdb_prompt $" { fail "ptype \$ARGV (interpreted as convenience var)" }
-   -re "$gdb_prompt $"                     { fail "ptype \$ARGV" }
-   timeout                             { fail "(timeout) ptype \$ARGV" }
-}
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/genso-thresh.c b/gdb/testsuite/gdb.hp/gdb.base-hp/genso-thresh.c
deleted file mode 100644
index 50756bb..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/genso-thresh.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Program to generate the so-thresh testcase,
- * including associated linked-against shared libraries.
- * Build as:
- *
- *        cc -g -o genso-thresh genso-thresh.c
- *
- * Invoke as:
- *
- *        genso-thresh
- *
- * It will put all the code in the current directory (".").
- *
- * A makefile can also be generated if the -makemake option is used.
- * To use the makefile:
- *
- *        make -f so-thresh.mk all
- *
- * The name of the application is
- *
- *        so-thresh
- *
- * (Revised from a program by John Bishop.  --rehrauer)
- */
-
-#include <stdio.h>
-#include <sys/stat.h>
-#include <sys/fcntl.h>
-
-int main (argc, argv)
-int    argc;
-char **argv;
-{
-#define NUMBER_OF_INT_VARS 1500
-#define NUMBER_OF_LIBS 3
-    int     lib_num = NUMBER_OF_LIBS;
-    int     i;
-    int     i2;
-    FILE   *main_file;
-    FILE   *lib_file;
-    FILE   *make_file;
-    FILE   *link_file;
-
-    char  testcase_name [1000];
-    char  linkfile_name [1000];
-    char  makefile_name [1000];
-    char  mainfile_name [1000];
-
-    char    file_name[100];
-    /*
-     *        0123456789       <-- length of field
-     *  "./fil0000000002.c";   <-- typical filename
-     *   12345678901234567890  <-- length of string
-     *           10        20
-     *                     ^where null goes
-     */
-    char    file_name_core[100];
-
-    /* Verify input.
-    */
-    if ((argc < 1) || (argc > 2) || (argv == NULL) ||
-        ((argc == 2) && (strcmp (argv[1], "-makemake") != 0)))
-      {
-        printf ("** Syntax: %s [-makemake]\n", argv[0]);
-        return;
-      }
-
-    if (strncmp (argv[0], "gen", 3) != 0)
-      {
-        printf ("** This tool expected to be named \"gen<something>\"\n");
-        return;
-      }
-    strcpy (testcase_name, argv[0]+3);
-
-    strcpy (linkfile_name, testcase_name);
-    strcat (linkfile_name, ".lopt");
-    link_file = fopen (linkfile_name, "w");
-    fprintf (link_file, "# Linker options for %s test\n", testcase_name);
-    
-    /* Generate the makefile, if requested.
-       */
-    if (argc == 2)
-      {
-        strcpy (makefile_name, testcase_name);
-        strcat (makefile_name, ".mk.new");
-        make_file = fopen (makefile_name, "w");
-        printf ("  Note: New makefile (%s) generated.\n", makefile_name);
-        printf ("  May want to update existing makefile, if any.\n");
-        fprintf (make_file, "# Generated automatically by %s\n", argv[0]);
-        fprintf (make_file, "# Make file for %s test\n", testcase_name);
-        fprintf (make_file, "\n");
-        fprintf (make_file, "CFLAGS = +DA1.1 -g\n");
-        fprintf (make_file, "\n");
-        fprintf (make_file, "# This is how to build this generator.\n");
-        fprintf (make_file, "%s.o: %s.c\n", argv[0], argv[0]);
-        fprintf (make_file, "\t$(CC) $(CFLAGS) -o %s.o -c %s.c\n", argv[0], argv[0]);
-        fprintf (make_file, "%s: %s.o\n", argv[0], argv[0]);
-        fprintf (make_file, "\t$(CC) $(CFLAGS) -o %s %s.o\n", argv[0], argv[0]);
-        fprintf (make_file, "\n");
-        fprintf (make_file, "# This is how to run this generator.\n");
-        fprintf (make_file, "# This target should be made before the 'all' target,\n");
-        fprintf (make_file, "# to ensure that the shlib sources are all available.\n");
-        fprintf (make_file, "require_shlibs: %s\n", argv[0]);
-        for (i=0; i < lib_num; i++)
-          {
-            fprintf (make_file, "\tif ! [ -a lib%2.2d_%s.c ] ; then \\\n", i, testcase_name);
-            fprintf (make_file, "\t  %s ; \\\n", argv[0]);
-            fprintf (make_file, "\tfi\n");
-          }
-        fprintf (make_file, "\n");
-        fprintf (make_file, "# This is how to build all the shlibs.\n");
-        fprintf (make_file, "# Be sure to first make the require_shlibs target!\n");
-        for (i=0; i < lib_num; i++)
-          {
-            fprintf (make_file, "lib%2.2d_%s.o: lib%2.2d_%s.c\n", i, testcase_name, i, testcase_name);
-            fprintf (make_file, "\t$(CC) $(CFLAGS) +Z -o lib%2.2d_%s.o -c lib%2.2d_%s.c\n", i, testcase_name, i, testcase_name);
-            fprintf (make_file, "lib%2.2d-%s.sl: lib%2.2d-%s.o\n", i, testcase_name, i, testcase_name);
-            fprintf (make_file, "\t$(LD) $(LDFLAGS) -b -o lib%2.2d-%s.sl lib%2.2d-%s.o\n", i, testcase_name, i, testcase_name);
-          }
-        fprintf (make_file, "\n");
-fprintf (make_file, "# For convenience, here's names for all pieces of all shlibs.\n");
-        fprintf (make_file, "SHLIB_SOURCES = \\\n");
-        for (i=0; i < lib_num-1; i++)
-          fprintf (make_file, "\tlib%2.2d-%s.c \\\n", i, testcase_name);
-        fprintf (make_file, "\tlib%2.2d-%s.c\n", lib_num-1, testcase_name);
-        fprintf (make_file, "SHLIB_OBJECTS = $(SHLIB_SOURCES:.c=.o)\n");
-        fprintf (make_file, "SHLIBS = $(SHLIB_SOURCES:.c=.sl)\n");
-        fprintf (make_file, "SHLIB_NAMES = $(SHLIB_SOURCES:.c=)\n");
-        fprintf (make_file, "EXECUTABLES = $(SHLIBS) %s %s\n", argv[0], testcase_name);
-        fprintf (make_file, "OBJECT_FILES = $(SHLIB_OBJECTS) %s.o %s.o\n", argv[0], testcase_name);
-        fprintf (make_file, "\n");
-        fprintf (make_file, "shlib_objects: $(SHLIB_OBJECTS)\n");
-        fprintf (make_file, "shlibs: $(SHLIBS)\n");
-        fprintf (make_file, "\n");
-        fprintf (make_file, "# This is how to build the debuggable testcase that uses the shlibs.\n");
-        fprintf (make_file, "%s.o: %s.c\n", testcase_name, testcase_name);
-        fprintf (make_file, "\t$(CC) $(CFLAGS) -o %s.o -c %s.c\n", testcase_name, testcase_name);
-        fprintf (make_file, "%s: shlibs %s.o\n", testcase_name, testcase_name);
-        fprintf (make_file, "\t$(LD) $(LDFLAGS) -o %s -lc -L. ", testcase_name);
-        fprintf (make_file, "-c %s /opt/langtools/lib/end.o /lib/crt0.o %s.o\n", linkfile_name, testcase_name);
-        fprintf (make_file, "\n");
-        fprintf (make_file, "# Yeah, but you should first make the require_shlibs target!\n");
-        fprintf (make_file, "all: %s %s\n", testcase_name, argv[0]);
-        fprintf (make_file, "\n");
-        fprintf (make_file, "# To remove everything built via this makefile...\n");
-        fprintf (make_file, "clean:\n");
-        /* Do this carefully, to avoid hitting silly HP-UX ARG_MAX limits... */
-        fprintf (make_file, "\trm -f lib0*-%s.*\n", testcase_name);
-        fprintf (make_file, "\trm -f lib1*-%s.*\n", testcase_name);
-        fprintf (make_file, "\trm -f lib2*-%s.*\n", testcase_name);
-        fprintf (make_file, "\trm -f lib3*-%s.*\n", testcase_name);
-        fprintf (make_file, "\trm -f lib4*-%s.*\n", testcase_name);
-        fprintf (make_file, "\trm -f lib5*-%s.*\n", testcase_name);
-        fprintf (make_file, "\trm -f lib6*-%s.*\n", testcase_name);
-        fprintf (make_file, "\trm -f lib7*-%s.*\n", testcase_name);
-        fprintf (make_file, "\trm -f lib8*-%s.*\n", testcase_name);
-        fprintf (make_file, "\trm -f lib9*-%s.*\n", testcase_name);
-        fprintf (make_file, "\trm -f %s %s %s %s.c\n", argv[0], testcase_name, linkfile_name, testcase_name);
-        fprintf (make_file, "\n");
-        fclose (make_file);
-      }
-
-    /* Generate the code for the libraries.
-       */
-    for (i=0; i < lib_num; i++) {
-
-        /* Generate the names for the library.
-         */
-        sprintf (file_name, "lib%2.2d-%s.c", i, testcase_name);
-        sprintf (file_name_core, "lib%2.2d-%s", i, testcase_name);
-
-        /* Generate the source code.
-         */
-        lib_file = fopen (file_name, "w");
-        fprintf (lib_file, "/* Shared library file number %d */\n", i);
-        fprintf (lib_file, "#include <stdio.h>\n\n");
-        fprintf (lib_file, "/* The following variables largely exist to bloat this library's debug info. */\n");
-        fprintf (lib_file, "static char c_static_buf_%d [100];\n", i);
-        for (i2=0; i2<NUMBER_OF_INT_VARS; i2++)
-          fprintf (lib_file, "int i_%d_%d;\n", i, i2);
-        fprintf (lib_file, "\nint r_%d ()\n", i);
-        fprintf (lib_file, "{\n");
-        for (i2=0; i2<NUMBER_OF_INT_VARS; i2++)
-          fprintf (lib_file, "    i_%d_%d = %d*%d;\n", i, i2, i2, i2);
-        fprintf (lib_file, "    return 1;\n");
-        fprintf (lib_file, "}\n\n");
-        fprintf (lib_file, "/* end of generated file */\n");
-        fclose (lib_file);
-
-        /* Add a linker options line
-           */
-        fprintf (link_file, "-l%2.2d-%s\n", i, testcase_name);
-    }
-
-    /* Generate the "main" file.
-     */
-    strcpy (mainfile_name, testcase_name);
-    strcat (mainfile_name, ".c");
-    main_file = fopen (mainfile_name, "w");
-    fprintf (main_file, "/* Generated test progam with %d shared libraries. */\n\n",
-             lib_num);
-    fprintf (main_file, "#include <stdio.h>\n\n");
-
-    for (i = 0; i < lib_num; i++) {
-      fprintf (main_file, "extern int r_%d();\n", i);
-    }
-
-    fprintf (main_file, "\n");
-    fprintf (main_file, "int main()\n");
-    fprintf (main_file, "{\n");
-    fprintf (main_file, "    int accum;\n");
-    fprintf (main_file, "    int lib_num = %d;\n", lib_num);
-  
-    for (i = 0; i < lib_num; i++) {
-      fprintf (main_file, "    accum += r_%d();\n", i);
-    }
-
-    fprintf (main_file, "    printf( \"Final value: %%d, should be %%d\\n\", accum, lib_num );\n\n");
-    fprintf (main_file, "    return 0;\n");
-    fprintf (main_file, "}\n\n");
-    fprintf (main_file, "/* end of generated file */\n");
-    fclose (main_file);
-
-    /* Finish up the link file and the build file
-     */
-    fclose (link_file);
-}
-
-/* End of file */
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/hwwatchbus.c b/gdb/testsuite/gdb.hp/gdb.base-hp/hwwatchbus.c
deleted file mode 100644
index 833d027..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/hwwatchbus.c
+++ /dev/null
@@ -1,9 +0,0 @@
-/* This program raises a SIGBUS signal on HP-UX when the
-   pointer "bogus_p" is dereferenced.
-   */
-int *  bogus_p = (int *)3;
-
-int main()
-{
-  *bogus_p = 0xdeadbeef;
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/hwwatchbus.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/hwwatchbus.exp
deleted file mode 100644
index 4654ec4..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/hwwatchbus.exp
+++ /dev/null
@@ -1,74 +0,0 @@
-#   Copyright (C) 1997-2015 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
-
-
-if { [skip_hp_tests] } then { continue }
-
-if { ![istarget "hppa*-*-hpux11.*"] } {
-    verbose "HPUX h/w watch test ignored for non-hppa or pre-HP/UX-10.30 targets."
-    return 0
-}
-
-set testfile "hwwatchbus"
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
-
-# build the first test case
-if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
-     untested hwwatchbus.exp
-     return -1
-}
-
-if [get_compiler_info] {
-    return -1
-}
-
-# Start with a fresh gdb
-
-gdb_exit
-remote_exec build "rm -f ${binfile}.bak"
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-
-# We ought to be able to set a hardware watchpoint, step, and
-# get a SIGBUS or SIGSEGV signal reported.
-#
-if ![runto_main] then {
-  fail "can't run to main"
-  return 0
-}
-
-send_gdb "watch bogus_p\n"
-gdb_expect {
-  -re "Hardware watchpoint \[0-9\]*: bogus_p.*$gdb_prompt $"\
-          {pass "set h/w watchpoint"}
-  -re "$gdb_prompt $"\
-          {fail "set h/w watchpoint"}
-  timeout {fail "(timeout) set h/w watchpoint"}
-}
-
-send_gdb "step\n"
-gdb_expect {
-  -re "Program received signal (SIGBUS|SIGSEGV), (Bus error|Segmentation fault).* in main .*${srcfile}:8.*$gdb_prompt $"\
-          {pass "see real signal when h/w watchpoint set"}
-  -re "$gdb_prompt $"\
-          {fail "see real signal when h/w watchpoint set"}
-  timeout {fail "(timeout) see real signal when h/w watchpoint set"}
-}
-
-remote_exec build "mv ${binfile} ${binfile}.bak"
-return 0
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.c b/gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.c
deleted file mode 100644
index 31046b5..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.c
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <stdio.h>
-
-#ifdef PROTOTYPES
-int callee (int x)
-#else
-int callee( x )
-int x;
-#endif
-{
-    int y = x * x;
-    return (y - 2);
-}
-
-int main()
-{
-    int i;
-    for (i = 1; i < 10; i++)
-        {
-            printf( "%d ", callee( i ));
-            
-        }
-    printf( " Goodbye!\n" );
-    return 0;
-}
-/* This routine exists only for aCC.  The way we compile this test is
-   that we use aCC for the actual compile into the object file but then
-   use ld directly for the link.  When we do this, we get an undefined
-   symbol _main().  Therefore, for aCC, we have this routine in here and
-   ld is happy.  */
-
-#ifdef __cplusplus
-extern "C" {
-void _main()
-{
-}
-}
-#endif
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.exp
deleted file mode 100644
index dca9070..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.exp
+++ /dev/null
@@ -1,119 +0,0 @@
-# Copyright (C) 1998-2015 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-
-# This file is part of the gdb testsuite
-
-
-# pxdb.exp   Test that gdb calls pxdb on an application
-#            built without it.
-#
-
-if { [skip_hp_tests] } then { continue }
-
-set testfile pxdb
-set srcfile ${testfile}.c
-set objfile ${objdir}/${subdir}/${testfile}.o
-set binfile ${objdir}/${subdir}/${testfile}
-
-if [get_compiler_info "c++"] {
-    return -1
-}
-
-if { $gcc_compiled } then { continue }
-
-# To build a non-pxdb-ed file, use
-#
-#     <compile to .o file>
-#     export LD_PXDB /dev/null
-#     ld -o hello_no_pxdb hello.o /opt/langtools/lib/end.o /usr/ccs/lib/crt0.o -lc
-#
-
-if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${objfile}" object {debug}] != "" } {
-    untested pxdb.exp
-    return -1
-}
-
-#
-# use this to debug:
-#log_user 1
-
-
-# Following should get the error message:
-#
-#      ld: (Warning) Can't exec pxdb using path: /dev/null
-#
-#execute_anywhere "ksh -c \"export LD_PXDB=/dev/null\""
-
-if [istarget "hppa64-*-*"] {
-set cmdline  "ksh -c \"LD_PXDB=/dev/null ld -o ${binfile} ${objfile} /opt/langtools/lib/pa20_64/crt0.o /opt/langtools/lib/pa20_64/end.o -lc\""
-} else {
-set cmdline  "ksh -c \"LD_PXDB=/dev/null ld -o ${binfile} ${objfile} /usr/ccs/lib/crt0.o /opt/langtools/lib/end.o -lc\""
-}
-
-remote_exec build "rm ${binfile}"
-remote_exec build $cmdline
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-
-# We expect to see this:
-#
-#  "warning: File not processed by pxdb--about to process now.
-#  "
-#  ".
-#  "Procedures: 7
-#  "Files: 2
-#  "Reading symbols from ~/c_code.dir/hello_no_pxdb...done.
-#  "(gdb)
-#
-send_gdb "file ${binfile}\n"
-gdb_expect {
-
-    -re ".*warning: File not processed by pxdb.*Procedures: \[0-9\]+.*$gdb_prompt $"\
-                            { pass "PXDB call"        }
-
-    -re "$gdb_prompt $" {
-      if [istarget hppa*-*-hpux*] {
-        pass "Didn't call pxdb"
-      } else { 
-        fail "Didn't call pxdb"
-      }
-    }
-
-    -re ".*$gdb_prompt $"       { fail "Some other message" }
-
-    timeout                 { fail "call pxdb (timeout)" }
-}
-
-# Make sure the new data makes sense
-#
-if { ![runto callee] } then { return }
-
-send_gdb "print x\n"
-gdb_expect {
-   -re ".*= 1.*$gdb_prompt $"    { pass "Good data after pxdb call" }
-   -re ".*$gdb_prompt $"         { fail "No data after pxdb call" }
-   timeout { fail "(timeout)" }
-}
-
-gdb_exit
-return 0
-
-
-
-
-
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.exp
deleted file mode 100644
index 600a880..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.exp
+++ /dev/null
@@ -1,182 +0,0 @@
-# Tests of wide register displays for GDB on HPPA 2.0 machines
-#   Copyright 1994-2015 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
-
-# use this to debug:
-#log_user 1
-
-if { [skip_hp_tests] } { continue }
-
-if ![istarget "hppa*-*-*"] {
-    verbose "Wide register test ignored for non-hppa targets."
-    return 0
-}
-
-if ![istarget "hppa64-hp-hpux*"] {
-    verbose "reg-pa64.exp is only for PA2.0W (aka PA64)."
-    return 0
-}
-
-set testfile "reg-pa64"
-set srcfile ${testfile}.s
-set binfile ${objdir}/${subdir}/${testfile}
-
-# To build a pa 2.0 executable
-#
-#     as +DA2.0W -o reg-pa64 reg-pa64.s
-# or 
-#     cc +DA2.0W -g -o reg-pa64 reg-pa64.s
-#
-# Don't reject if there are warnings, as we expect this warning:
-#
-#    (Warning) At least one PA 2.0 object file (pa2.0_test2.o) was detected.
-#    The linked output may not run on a PA 1.x system.
-#
-
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
-    untested reg-pa64.exp
-    return -1
-}
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-# test machine--there's no 2.0n architecture, so we have
-# to try to run the app.
-#
-gdb_test "break main" "Breakpoint.*" "initial set-up"
-
-send_gdb "run\n"
-gdb_expect {
-    -re ".*Executable file incompatible with hardware.*$gdb_prompt $" {
-        # Not hppa2.0 machine
-        #
-        return 0
-    }
-    -re "Cannot exec.*$gdb_prompt $" {
-        # Not hppa2.0 machine
-        #
-        return 0
-    }
-    -re ".*Starting program:.*$gdb_prompt $" {
-        pass "Ready to start test"
-    }
-    timeout {
-        fail "initial set-up, part 2 (timeout)"
-        return 0
-    }
-}
-
-# Let the program set known values.  This secretly deletes
-# the breakpoint at main and re-runs to mainend.
-#
-runto mainend
-
-# Look for known values
-#
-gdb_test "info reg r1"  "r1 1"
-gdb_test "info reg r4"  "r4 2"
-gdb_test "info reg r5"  "r5 4"
-gdb_test "info reg r6"  "r6 8"
-gdb_test "info reg r7"  "r7 10"
-gdb_test "info reg r8"  "r8 20"
-gdb_test "info reg r9"  "r9 40"
-gdb_test "info reg r10" "r10 80"
-gdb_test "info reg r11" "r11 100"
-gdb_test "info reg r12" "r12 200"
-gdb_test "info reg r13" "r13 400"
-gdb_test "info reg r14" "r14 800"
-gdb_test "info reg r15" "r15 1000"
-gdb_test "info reg r16" "r16 2000"
-
-# Two odd variants that GDB supports are:
-#   "1" means "r1", and
-#   "$1" means "r1"
-#
-gdb_test "info reg 1 4" "r1 1.*r4 2"
-gdb_test "info reg \$1" "r1 1"
-
-# Verify that GDB responds gracefully to a register ID number that
-# is out of range.
-#
-gdb_test "info reg 999" "999: invalid register"
-
-# Make sure the floating point status and error registers
-# don't show up as floating point numbers!
-#
-gdb_test "info reg fpsr" ".*fpsr 0.*" "fpsr"
-gdb_test "info reg fpe1" ".*fpe1 .*" "fpe1"
-gdb_test "info reg fpe2" ".*fpe2 .*" "fpe2"
-gdb_test "info reg fpe3" ".*fpe3 .*" "fpe3"
-#DTS CLLbs16708
-#info reg should recognize fpe4..fpe7.
-setup_xfail hppa64-hp-hpux* CLLbs16708
-gdb_test "info reg fpe4" ".*fpe4 .*" "fpe4"
-setup_xfail hppa64-hp-hpux* CLLbs16708
-gdb_test "info reg fpe5" ".*fpe5 .*" "fpe5"
-setup_xfail hppa64-hp-hpux* CLLbs16708
-gdb_test "info reg fpe6" ".*fpe6 .*" "fpe6"
-setup_xfail hppa64-hp-hpux* CLLbs16708
-gdb_test "info reg fpe7" ".*fpe7 .*" "fpe7"
-
-gdb_test "info reg fr4"  ".*fr4.*(double precision).* 1.*"
-gdb_test "info reg fr5"  ".*fr5.*(double precision).* 2.*"
-gdb_test "info reg fr6"  ".*fr6.*(double precision).* 2.*"
-gdb_test "info reg fr7"  ".*fr7.*(double precision).* 4.*"
-gdb_test "info reg fr8"  ".*fr8.*(double precision).* 8.*"
-gdb_test "info reg fr9"  ".*fr9.*(double precision).* 32.*"
-gdb_test "info reg fr10" ".*fr10.*(double precision).* 256.*"
-
-gdb_test "info reg r19" "r19 deadbeefbadcadee"
-
-# Need to add test of use of $<register-name>
-#
-# Q: How do you say a literal "$" in expect?
-# A: You say "\$".   A literal "\" is "\\".
-#
-# Please note that this test will fail as long as we are running
-# in 32-bit mode: it will produce "$1 = 0xbadcadee".  To fix it
-# would require building a real 64-bit gdb (expression evaluation, 
-# in particular).
-#
-send_gdb "p/x \$r19\n"
-gdb_expect {
-    -re ".*= 0xdeadbeefbadcadee.*$gdb_prompt $" {
-        pass "64-bit works"
-    }
-    -re ".*= 0xbadcadee.*$gdb_prompt $" {
-        pass "32-bit extract when using PRINT; expected but not good"
-    }
-    -re ".*$gdb_prompt $" {
-        fail "didn't print any part of right value"
-    }
-    timeout {
-        fail "timeout on print"
-    }
-}
-
-# Need to add tests of setting wide regs too.  E.g.
-#
-# set $r4 = 0x1234567890123456
-# p/x $r4
-#
-
-# done
-#
-gdb_exit
-
-return 0
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.s b/gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.s
deleted file mode 100644
index 4c284d7..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.s
+++ /dev/null
@@ -1,104 +0,0 @@
-;  assemble as "as -o reg-pa64 reg-pa64.s"
-; or
-;  cc -g -o +DA2.0W
-;
-; PA-RISC 2.0 register contents test.
-;
-        .level 2.0W
-
-        .code
-        .export main,ENTRY
-        .export mainend,CODE
-        .export lab1,CODE
-        .space $TEXT$
-        .subspa $CODE$
-one
-        .align 8
-        .stringz        "?\xF0\x00\x00\x00\x00\x00\x00@\x00\x00\x00\x00\x00\x00"
-
-main
-        .proc
-        .callinfo NO_CALLS,FRAME=0
-        .entry
-
-        ;; Test we have right register numbers
-        ;;
-        ADD             %r0,%r0,%r1             ;    0 
-        LDI             1,%r1                   ;    1
-        ;;
-        ;; Don't put anything into r2 or r3--they are special registers.
-        ;;
-        ADD             %r1,%r1,%r4             ;    2
-        ADD             %r4,%r4,%r5             ;    4
-        ADD             %r5,%r5,%r6             ;    8
-        ADD             %r6,%r6,%r7             ;   16
-        ADD             %r7,%r7,%r8             ;   32
-        ADD             %r8,%r8,%r9             ;   64
-        ADD             %r9,%r9,%r10            ;  128
-        ADD             %r10,%r10,%r11          ;  256
-        ADD             %r11,%r11,%r12          ;  512
-        ADD             %r12,%r12,%r13          ; 1024
-        ADD             %r13,%r13,%r14          ; 2048
-        ADD             %r14,%r14,%r15          ; 4096
-        ADD             %r15,%r15,%r16          ; 9192
-
-        ;; Test high bits, to be sure we show them.
-        ;;
-        LDI             0xde,%r19               ; "de"
-        DEPD,Z          %r19,55,56,%r19         ; "de00"
-        LDI             0xad,%r18               ; "ad"
-        ADD             %r18,%r19,%r19          ; "dead"
-        DEPD,Z          %r19,55,56,%r19         ; "dead00"
-        LDI             0xbe,%r18               ; "be"
-        ADD             %r18,%r19,%r19          ; "deadbe"
-        DEPD,Z          %r19,55,56,%r19         ; "deadbe00"
-        LDI             0xef,%r18               ; "ef"
-        ADD             %r18,%r19,%r19          ; "deadbeef"
-        ;
-        DEPD,Z          %r19,55,56,%r19         ; "deadbeef00"
-        LDI             0xba,%r18               ; "ba"
-        ADD             %r18,%r19,%r19          ; "deadbeefba"
-        DEPD,Z          %r19,55,56,%r19         ; "deadbeefba00"
-        LDI             0xdc,%r18               ; "dc"
-        ADD             %r18,%r19,%r19          ; "deadbeefbadc"
-        DEPD,Z          %r19,55,56,%r19         ; "deadbeefbadc00"
-        LDI             0xad,%r18               ; "ad"
-        ADD             %r18,%r19,%r19          ; "deadbeefbadcad"
-        DEPD,Z          %r19,55,56,%r19         ; "deadbeefbadcad00"
-        LDI             0xee,%r18               ; "ee"
-        ADD             %r18,%r19,%r19          ; "deadbeefbadcadee"
-        
-lab1    ;; Test floating point registers
-        ;;
-        ;; LDIL            LR'one,%r22             ;
-        ;; FLDD            RR'one(%r22),%fr4       ;   1.0
-        ;; FLDD            RR'one+8(%r22),%fr5     ;   2.0
-        ;; FLDD            RR'one+8(%r22),%fr6     ;   2.0
-	B,L		here,%r2
-	NOP
-here	DEPDI		0x0,63,2,%r2
-	LDO		one-here(%r2),%r2
-	FLDD		0(%r2),%fr4
-	FLDD		8(%r2),%fr5
-	FLDD		8(%r2),%fr6
-
-        FMPY,DBL        %fr5,%fr6,%fr7          ;   4.0
-        FMPY,DBL        %fr6,%fr7,%fr8          ;   8.0
-        FMPY,DBL        %fr7,%fr8,%fr9          ;  32.0
-        FMPY,DBL        %fr8,%fr9,%fr10         ; 256.0
-        
-        ;; The NOP prevents anything from end.o or crt0.o from
-        ;; being appended immediately after "mainend".  If that
-        ;; happens, then we may have other labels that have the
-        ;; same address as "mainend", and thus the debugger
-        ;; may symbolize this PC to something other than "mainend".
-mainend                
-        NOP
-        .exit
-        .procend
-
-        .space $TEXT$
-        .subspa $CODE$
-        .subspa $LIT$        ;; <don't use> ,QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=16
-        .end
-
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/reg.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/reg.exp
deleted file mode 100644
index fee046a..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/reg.exp
+++ /dev/null
@@ -1,230 +0,0 @@
-# This test script is part of GDB, the GNU debugger.
-
-# Copyright 1998-2015 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
-
-# Tests of wide register displays for GDB on HPPA 2.0 machines
-
-# use this to debug:
-#log_user 1
-
-if { [skip_hp_tests] } then { continue }
-
-set testfile "reg"
-
-if [istarget "hppa64-hp-hpux*"] {
-    verbose "reg.exp is not for PA2.0W."
-    return 0
-}
-set srcfile ${testfile}.s
-set binfile ${objdir}/${subdir}/${testfile}
-
-# To build a pa 2.0 executable
-#
-#     as -o reg reg.s
-# or 
-#     cc -g -o reg reg.s
-#
-# The +DA2.0N flag doesn't seem to be needed.
-#
-# Don't reject if there are warnings, as we expect this warning:
-#
-#    (Warning) At least one PA 2.0 object file (pa2.0_test2.o) was detected.
-#    The linked output may not run on a PA 1.x system.
-#
-
-if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
-     untested reg.exp
-     return -1
-}
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-# test machine--there's no 2.0n architecture, so we have
-# to try to run the app.
-#
-send_gdb "break main\n"
-    gdb_expect {
-        -re "Breakpoint.*$gdb_prompt $" {
-            pass "initial set-up"
-        }
-        -re ".*$gdb_prompt $" {
-            fail "initial set-up"
-        }
-        timeout {
-            fail "initial set-up (timeout)"
-        }
-    }
-
-send_gdb "run\n"
-    gdb_expect {
-        -re ".*Executable file incompatible with hardware.*$gdb_prompt $" {
-            # Not hppa2.0 machine
-            #
-            return 0
-        }
-        -re "Cannot exec.*$gdb_prompt $" {
-            # Not hppa2.0 machine
-            #
-            return 0
-        }
-        -re ".*Starting program:.*$gdb_prompt $" {
-            pass "Ready to start test"
-        }
-        timeout {
-            fail "initial set-up, part 2 (timeout)"
-            return 0
-        }
-    }
-
-# Let the program set known values.  This secretly deletes
-# the breakpoint at main and re-runs to mainend.
-#
-runto mainend
-
-# Look for known values
-#
-# The output format changed between gdb 6.1.1 and gdb HEAD 2004-06-01.
-#
-#   gdb 6.1.1:
-#   (gdb) info reg r1
-#   r1 1
-#
-#   gdb HEAD 2004-06-01:
-#   (gdb) info reg r1
-#   r1             0x1     1
-#
-# For now, I accept both formats.  In the future, you can remove
-# the old gdb 6.1.1 format.
-#
-# -- chastain 2004-06-26
-
-set ws "\[\r\n\t \]+"
-
-proc hp_integer_reg {regname vhex vdec} {
-  global ws
-  set value_611 "$regname${ws}$vhex"
-  set value_new "$regname${ws}0x$vhex${ws}$vdec"
-  gdb_test "info reg $regname" "$value_611|$value_new"
-}
-
-hp_integer_reg "r1"      "1"     "1"
-hp_integer_reg "r4"      "2"     "2"
-hp_integer_reg "r5"      "4"     "4"
-hp_integer_reg "r6"      "8"     "8"
-hp_integer_reg "r7"     "10"    "16"
-hp_integer_reg "r8"     "20"    "32"
-hp_integer_reg "r9"     "40"    "64"
-hp_integer_reg "r10"    "80"   "128"
-hp_integer_reg "r11"   "100"   "256"
-hp_integer_reg "r12"   "200"   "512"
-hp_integer_reg "r13"   "400"  "1024"
-hp_integer_reg "r14"   "800"  "2048"
-hp_integer_reg "r15"  "1000"  "4096"
-hp_integer_reg "r16"  "2000"  "8192"
-
-# Two odd variants that GDB supports are:
-#   "1" means "r1", and
-#   "$1" means "r1"
-
-hp_integer_reg "1" "1" "1"
-hp_integer_reg "4" "2" "2"
-
-set name "info reg \$1"
-gdb_test_multiple "info reg \$1" "$name" {
-    -re "r1${ws}1\r\n$gdb_prompt $" {
-	pass "$name"
-    }
-    -re "r1${ws}0x1${ws}1\r\n$gdb_prompt $" {
-	pass "$name"
-    }
-}
-
-# Verify that GDB responds gracefully to a register ID number that
-# is out of range.
-
-gdb_test "info reg 999" "Invalid register.*999.*"
-
-# Make sure the floating point status and error registers
-# don't show up as floating point numbers!
-
-hp_integer_reg "fpsr" "0" "0"
-hp_integer_reg "fpe1" "0" "0"
-hp_integer_reg "fpe2" "0" "0"
-hp_integer_reg "fpe3" "0" "0"
-hp_integer_reg "fpe4" "0" "0"
-hp_integer_reg "fpe5" "0" "0"
-hp_integer_reg "fpe6" "0" "0"
-hp_integer_reg "fpe7" "0" "0"
-
-# Floating point registers.
-# TODO: these are old format only.
-
-gdb_test "info reg fr4"  ".*fr4.*(double precision).* 1"
-gdb_test "info reg fr5"  ".*fr5.*(double precision).* 2"
-gdb_test "info reg fr6"  ".*fr6.*(double precision).* 2"
-gdb_test "info reg fr7"  ".*fr7.*(double precision).* 4"
-gdb_test "info reg fr8"  ".*fr8.*(double precision).* 8"
-gdb_test "info reg fr9"  ".*fr9.*(double precision).* 32"
-gdb_test "info reg fr10" ".*fr10.*(double precision).* 256"
-
-# An integer register with a 64-bit value.
-
-set name "info reg r19"
-gdb_test_multiple "info reg r19" "$name" {
-    -re "r19${ws}deadbeefbadcadee\r\n$gdb_prompt $" {
-	# old gdb 6.1.1 format, good result
-	pass "$name"
-    }
-    -re "r19${ws}badcadee\r\n$gdb_prompt $" {
-	# old gdb 6.1.1 format, bad result
-	fail "$name (32-bit truncation)"
-    }
-    -re "r19${ws}0xdeadbeefbadcadee${ws}16045690984232431086\r\n$gdb_prompt $" {
-	# new gdb HEAD 2004-06-01 format, good result
-	pass "$name"
-    }
-    -re "r19${ws}0xbadcadee${ws}3135024622\r\n$gdb_prompt $" {
-	# new gdb HEAD 2004-06-01 format, 32 bit truncation
-	fail "$name (32-bit truncation)"
-    }
-}
-
-set name "print /x \$r19"
-gdb_test_multiple "print /x \$r19" "$name" {
-    -re "= 0xdeadbeefbadcadee\r\n$gdb_prompt $" {
-	pass "$name"
-    }
-    -re "= 0xbadcadee\r\n$gdb_prompt $" {
-	# this was a PASS in the last version so keep it PASS for now
-	# -- chastain 2004-06-26
-	pass "$name (32-bit truncation)"
-    }
-}
-
-# Need to add tests of setting wide regs too.  E.g.
-#
-# set $r4 = 0x1234567890123456
-# p/x $r4
-#
-
-# done
-#
-gdb_exit
-
-return 0
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/reg.s b/gdb/testsuite/gdb.hp/gdb.base-hp/reg.s
deleted file mode 100644
index 8cc15f8..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/reg.s
+++ /dev/null
@@ -1,96 +0,0 @@
-;  assemble as "as -o reg reg.s"
-; or
-;  cc -g -o +DA2.0N
-;
-; PA-RISC 2.0 register contents test.
-;
-        .level 2.0
-
-        .code
-        .export main,ENTRY
-        .export mainend,CODE
-        .export lab1,CODE
-        .space $TEXT$
-        .subspa $CODE$
-
-main
-        .proc
-        .callinfo NO_CALLS,FRAME=0
-        .entry
-
-        ;; Test we have right register numbers
-        ;;
-        ADD             %r0,%r0,%r1             ;    0 
-        LDI             1,%r1                   ;    1
-        ;;
-        ;; Don't put anything into r2 or r3--they are special registers.
-        ;;
-        ADD             %r1,%r1,%r4             ;    2
-        ADD             %r4,%r4,%r5             ;    4
-        ADD             %r5,%r5,%r6             ;    8
-        ADD             %r6,%r6,%r7             ;   16
-        ADD             %r7,%r7,%r8             ;   32
-        ADD             %r8,%r8,%r9             ;   64
-        ADD             %r9,%r9,%r10            ;  128
-        ADD             %r10,%r10,%r11          ;  256
-        ADD             %r11,%r11,%r12          ;  512
-        ADD             %r12,%r12,%r13          ; 1024
-        ADD             %r13,%r13,%r14          ; 2048
-        ADD             %r14,%r14,%r15          ; 4096
-        ADD             %r15,%r15,%r16          ; 9192
-
-        ;; Test high bits, to be sure we show them.
-        ;;
-        LDI             0xde,%r19               ; "de"
-        DEPD,Z          %r19,55,56,%r19         ; "de00"
-        LDI             0xad,%r18               ; "ad"
-        ADD             %r18,%r19,%r19          ; "dead"
-        DEPD,Z          %r19,55,56,%r19         ; "dead00"
-        LDI             0xbe,%r18               ; "be"
-        ADD             %r18,%r19,%r19          ; "deadbe"
-        DEPD,Z          %r19,55,56,%r19         ; "deadbe00"
-        LDI             0xef,%r18               ; "ef"
-        ADD             %r18,%r19,%r19          ; "deadbeef"
-        ;
-        DEPD,Z          %r19,55,56,%r19         ; "deadbeef00"
-        LDI             0xba,%r18               ; "ba"
-        ADD             %r18,%r19,%r19          ; "deadbeefba"
-        DEPD,Z          %r19,55,56,%r19         ; "deadbeefba00"
-        LDI             0xdc,%r18               ; "dc"
-        ADD             %r18,%r19,%r19          ; "deadbeefbadc"
-        DEPD,Z          %r19,55,56,%r19         ; "deadbeefbadc00"
-        LDI             0xad,%r18               ; "ad"
-        ADD             %r18,%r19,%r19          ; "deadbeefbadcad"
-        DEPD,Z          %r19,55,56,%r19         ; "deadbeefbadcad00"
-        LDI             0xee,%r18               ; "ee"
-        ADD             %r18,%r19,%r19          ; "deadbeefbadcadee"
-        
-lab1    ;; Test floating point registers
-        ;;
-        LDIL            LR'one,%r22             ;
-        FLDD            RR'one(%r22),%fr4       ;   1.0
-        FLDD            RR'one+8(%r22),%fr5     ;   2.0
-        FLDD            RR'one+8(%r22),%fr6     ;   2.0
-        FMPY,DBL        %fr5,%fr6,%fr7          ;   4.0
-        FMPY,DBL        %fr6,%fr7,%fr8          ;   8.0
-        FMPY,DBL        %fr7,%fr8,%fr9          ;  32.0
-        FMPY,DBL        %fr8,%fr9,%fr10         ; 256.0
-        
-        ;; The NOP prevents anything from end.o or crt0.o from
-        ;; being appended immediately after "mainend".  If that
-        ;; happens, then we may have other labels that have the
-        ;; same address as "mainend", and thus the debugger
-        ;; may symbolize this PC to something other than "mainend".
-mainend                
-        NOP
-        .exit
-        .procend
-
-        .space $TEXT$
-        .subspa $CODE$
-        .subspa $LIT$        ;; <don't use> ,QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=16
-one
-        .align 8
-        .stringz        "?\xF0\x00\x00\x00\x00\x00\x00@\x00\x00\x00\x00\x00\x00"
-        .end
-
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/sized-enum.c b/gdb/testsuite/gdb.hp/gdb.base-hp/sized-enum.c
deleted file mode 100644
index a6d5788..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/sized-enum.c
+++ /dev/null
@@ -1,43 +0,0 @@
-
-enum Normal {
-  red,
-  blue,
-  green
-};
-
-short enum Small {
-  pink,
-  cyan,
-  grey
-};
-
-char enum Tiny {
-  orange,
-  yellow,
-  brown
-};
-
-
-main()
-{
-  enum Normal normal[3];
-  short enum Small small[3];
-  char enum Tiny tiny[3];
-  int i;
-
-  for (i=0; i < 3; i++)
-    {
-      normal[i] = (enum Normal) i;
-      small[i] = (short enum Small) i;
-      tiny[i] = (char enum Tiny) i;
-    }
-  normal[0] = 0; /* place to hang a breakpoint */ 
-}
-
-    
-  
-
-  
-
-
-  
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/sized-enum.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/sized-enum.exp
deleted file mode 100644
index 061ac64..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/sized-enum.exp
+++ /dev/null
@@ -1,156 +0,0 @@
-# Copyright (C) 1997-2015 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
-
-# GDB tests for sized enumerations
-
-# This is aimed at HP-UX systems.  The HP C compiler
-# allows specifying "char" or "short" for an enum, to
-# indicate that it is 1 or 2 bytes long.
-
-# This file was written by Satish Pai <pai@apollo.hp.com>
-# 1997-09-24
-
-#
-# test running programs
-#
-
-if { [skip_hp_tests] } then { continue }
-
-set testfile "sized-enum"
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
-
-if [get_compiler_info] {
-    return -1
-}
-
-if { $gcc_compiled } then { continue }
-if {$hp_aCC_compiler} {continue}
-
-if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
-     untested sized-enum.exp
-     return -1
-}
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-#
-# set it up at a breakpoint so we can play with the variable values
-#
-
-if ![runto_main] then {
-    perror "couldn't run to breakpoint"
-    continue
-}
-
-# set a breakpoint and go there
-send_gdb "break 34\n"   
-gdb_expect {   
-   -re "Breakpoint.*line 34.*$gdb_prompt $" { pass "set break 34" }
-   -re "$gdb_prompt $"                     { fail "set break 34" }
-   timeout                             { fail "(timeout) set break 34" }
-}
-send_gdb "continue\n"   
-gdb_expect {   
-   -re "Continuing\\.\r\n\r\nBreakpoint \[0-9\]*, main....at.*sized-enum\\.c:34\r\n34.*\r\n$gdb_prompt $" { pass "continue" }
-   -re "$gdb_prompt $"                     { fail "continue" }
-   timeout                             { fail "(timeout) continue" }
-}
-
-# print stuff
-send_gdb "print normal\n"   
-gdb_expect {   
-   -re "\\$\[0-9\]* = \\{red, blue, green\\}.*$gdb_prompt $" { pass "print normal" }
-   -re "$gdb_prompt $"                     { fail "print normal" }
-   timeout                             { fail "(timeout) print normal" }
-}
-send_gdb "print small\n"   
-gdb_expect {   
-   -re "\\$\[0-9\]* = \\{pink, cyan, grey\\}.*$gdb_prompt $" { pass "print small" }
-   -re "$gdb_prompt $"                     { fail "print small" }
-   timeout                             { fail "(timeout) print small" }
-}
-send_gdb "print tiny\n"   
-gdb_expect {   
-   -re "\\$\[0-9\]* = \\{orange, yellow, brown\\}.*$gdb_prompt $" { pass "print tiny" }
-   -re "$gdb_prompt $"                     { fail "print tiny" }
-   timeout                             { fail "(timeout) print tiny" }
-}
-
-# print type sizes
-send_gdb "print sizeof (Normal)\n"   
-gdb_expect {   
-   -re "\\$\[0-9\]* = 4.*$gdb_prompt $" { pass "print sizeof (Normal)" }
-   -re "$gdb_prompt $"                     { fail "print sizeof (Normal)" }
-   timeout                             { fail "(timeout) print sizeof (Normal)" }
-}
-send_gdb "print sizeof (Small)\n"   
-gdb_expect {   
-   -re "\\$\[0-9\]* = 2.*$gdb_prompt $" { pass "print sizeof (Small)" }
-   -re "$gdb_prompt $"                     { fail "print sizeof (Small)" }
-   timeout                             { fail "(timeout) print sizeof (Small)" }
-}
-send_gdb "print sizeof (Tiny)\n"   
-gdb_expect {   
-   -re "\\$\[0-9\]* = 1.*$gdb_prompt $" { pass "print sizeof (Tiny)" }
-   -re "$gdb_prompt $"                     { fail "print sizeof (Tiny)" }
-   timeout                             { fail "(timeout) print sizeof (Tiny)" }
-}
-
-# print types
-send_gdb "ptype normal\n"   
-gdb_expect {   
-   -re "type = enum Normal \\{red, blue, green\\} \\\[3\\\].*$gdb_prompt $" { pass "ptype normal" }
-   -re "$gdb_prompt $"                     { fail "ptype normal" }
-   timeout                             { fail "(timeout) ptype normal" }
-}
-send_gdb "ptype small\n"   
-gdb_expect {   
-   -re "type = short enum Small \\{pink, cyan, grey\\} \\\[3\\\].*$gdb_prompt $" { pass "ptype small" }
-   -re "$gdb_prompt $"                     { fail "ptype small" }
-   timeout                             { fail "(timeout) ptype small" }
-}
-send_gdb "ptype tiny\n"   
-gdb_expect {   
-   -re "type = char enum Tiny \\{orange, yellow, brown\\} \\\[3\\\].*$gdb_prompt $" { pass "ptype tiny" }
-   -re "$gdb_prompt $"                     { fail "ptype tiny" }
-   timeout                             { fail "(timeout) ptype tiny" }
-}
-
-# convert to int
-send_gdb "print (int) blue\n"   
-gdb_expect {   
-   -re "\\$\[0-9\]* = 1.*$gdb_prompt $" { pass "print (int) blue" }
-   -re "$gdb_prompt $"                     { fail "print (int) blue" }
-   timeout                             { fail "(timeout) print (int) blue" }
-}
-send_gdb "print (int) cyan\n"   
-gdb_expect {   
-   -re "\\$\[0-9\]* = 1.*$gdb_prompt $" { pass "print (int) cyan" }
-   -re "$gdb_prompt $"                     { fail "print (int) cyan" }
-   timeout                             { fail "(timeout) print (int) cyan" }
-}
-send_gdb "print (int) yellow\n"   
-gdb_expect {   
-   -re "\\$\[0-9\]* = 1.*$gdb_prompt $" { pass "print (int) yellow" }
-   -re "$gdb_prompt $"                     { fail "print (int) yellow" }
-   timeout                             { fail "(timeout) print (int) yellow" }
-}
-
-
-
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.exp
deleted file mode 100644
index 117c7d8..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.exp
+++ /dev/null
@@ -1,331 +0,0 @@
-#   Copyright (C) 1997-2015 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
-
-
-if { [skip_hp_tests] } then { continue }
-
-set testfile "so-thresh"
-set binfile ${objdir}/${subdir}/${testfile}
-
-if [get_compiler_info] {
-    return -1
-}
-
-# This testcase is relatively large, and therefore can take awhile to
-# load.  We'd best set the timeout to something suitable, or we may
-# seem to fail...
-#
-set timeout 60
-
-# Build procedure for this testcase:
-#    ${srcdir}/${subdir}/so-thresh.sh ${subdir}
-#        which calls,
-#        make -f ${srcdir}/${subdir}/so-thresh.mk <targets> <macros>
-#            which builds,
-#                genso-thresh (from genso-thresh.c)
-#                    which generates,
-#                        lib00-so-thresh.c
-#                        lib01-so-thresh.c
-#                        lib02-so-thresh.c
-#                        so-thresh.lopt (link options file)
-#                lib0*-so-thresh.sl (from .c files above)
-#                so-thresh (from so-thresh.c)
-#                    using lib0*-so-thresh.sl and so-thresh.lopt
-#
-# Since so-thresh.mk requires SRCDIR and OBJDIR macro definitions,
-# and SRCDIR / OBJDIR could be in relative path format, we use
-# so-thresh.sh script to pin down SRCDIR / OBJDIR (using $PWD/ prefix
-# when detected relative path values for srcdir / objdir), before the
-# 'cd $subdir' call (when this can be done in TCL here, we can call
-# make directly instead).
-#
-# remote_exec build "sh -c \\\"cd ${objdir}/${subdir}\\; make -v -f ${srcdir}/${subdir}/${testfile}.mk clean require_shlibs all SRCDIR=${srcdir}/${subdir} OBJDIR=${objdir}/${subdir}\\\""
-
-remote_exec build "${srcdir}/${subdir}/${testfile}.sh $subdir"
-
-# Only HP-UX (and any other platforms using SOM shared libraries, I
-# guess) interprets the auto-solib-limit variable as a threshhold,
-# rather than a boolean that strictly enables or disables automatic
-# loading of shlib symbol tables.
-#
-# On HP-UX, it is the size threshhold (in megabytes) at which to
-# stop auto loading of symbol tables.
-#
-if ![istarget "hppa*-hp-hpux*"] then {
-   setup_xfail "*-*-*"
-}
-
-# Start with a fresh gdb
-#
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-# This is a test of gdb's ability on HP-UX to stop automatically
-# loading symbols of shared libraries, when the total size of the
-# debugger's symbol table reaches a specified threshhold.
-#
-
-# On HP-UX, the help text for auto-solib-limit mentions that it
-# serves as a threshhold.
-#
-send_gdb "help set auto-solib-limit\n"
-gdb_expect {
-  -re "Set threshold .in Mb. for autoloading shared library symbols.*
-When shared library autoloading is enabled, new libraries will be loaded.*
-only until the total size of shared library symbols exceeds this.*
-threshold in megabytes.  Is ignored when using .sharedlibrary.*$gdb_prompt $"\
-          {pass "help set auto-solib-limit"}
-  -re "$gdb_prompt $"\
-          {fail "help set auto-solib-limit"}
-  timeout {fail "(timeout) help set auto-solib-limit"}
-}
-
-# On HP-UX, the threshhold is by default set to 50, which means
-# 50 megabytes.
-#
-send_gdb "show auto-solib-limit\n"
-gdb_expect {
-  -re "Threshold .in Mb. for autoloading shared library symbols is $decimal.*$gdb_prompt $"\
-          {pass "show auto-solib-limit "}
-  -re "$gdb_prompt $"\
-          {fail "show auto-solib-limit "}
-  timeout {fail "(timeout) show auto-solib-limit "}
-}
-
-send_gdb "set auto-solib-limit 1\n"
-gdb_expect {
-   -re ".*$gdb_prompt $"
-            {pass "set auto-solib-limit to 1"}
-   -re ".*$gdb_prompt $"
-            {fail "set auto-solib-limit to 1"}
-   timeout {fail "(timeout) set auto-solib-limit to 1"}
-}
-
-
-# We have manually verified that our testcase exceeds 1 Mbytes
-# of heap space in GDB to hold the symbols for the main program
-# and all associated linked-against libraries.  Thus, when we
-# run to the program's main, and therefore notice all the linked-
-# against shlibs, we expect to hit the threshhold.
-#
-# (Note that we're not using the expect [runto main] function here,
-# 'cause we want to match on output from the run command.
-#
-send_gdb "break main\n"
-gdb_expect {
-  -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\
-          {pass "1 set break at main"}
-  -re "$gdb_prompt $"\
-          {fail "1 set break at main"}
-  timeout {fail "(timeout) 1 set break at main"}
-}
-
-send_gdb "run\n"
-gdb_expect {
-  -re ".*warning. Symbols for some libraries have not been loaded, because.*
-doing so would exceed the size threshold specified by auto-solib-limit.*
-To manually load symbols, use the 'sharedlibrary' command.*
-To raise the threshold, set auto-solib-limit to a larger value and rerun.*
-the program.*$gdb_prompt $"\
-          {pass "run to main hit auto-solib-limit threshold"}
-  -re "$gdb_prompt $"\
-          {fail "run to main hit auto-solib-limit threshold"}
-  timeout {fail "(timeout) run to main hit auto-solib-limit threshold"}
-}
-
-# Verify that "info share" mentions something about libraries whose
-# symbols weren't loaded.
-#
-# We'll assume that at least the last two shlib's symbols weren't
-# loaded.  As a side-effect of matching this pattern, the text start
-# address of the last one is captured in expect_out(1,string).
-# (we'll need it for the 'add-symbol-file' command in a nonce...)
-#
-send_gdb "info sharedlibrary\n"
-gdb_expect {
-  -re ".*lib01_$testfile.sl .*symbols not loaded.*0x\[0-9\]*  (0x\[0-9a-fA-F\]*).*$gdb_prompt $"\
-          { send_gdb "add-symbol-file lib02_$testfile.sl $expect_out(1,string)\n"
-            gdb_expect {
-              -re "add symbol table.*y or n.*$"\
-                      {send_gdb "y\n"
-                       gdb_expect {
-                         -re "$gdb_prompt $" {pass "add-symbol-file and info sharedlib"}
-                         timeout {fail "(timeout) add-symbol-file and info sharedlib"}
-                       }}
-              -re "$gdb_prompt $"\
-                      {fail "add-symbol-file and info sharedlib"}
-              timeout {fail "(timeout) add-symbol-file and info sharedlib"}
-            }
-          }
-  -re "$gdb_prompt $" {
-	setup_xfail hppa*-*-* CHFts24108
-	fail "info sharedlibrary shows shlibs with unloaded symbols"
-    }
-  timeout {fail "(timeout) info sharedlibrary shows shlibs with unloaded symbols"}
-}
-
-# Verify that we can manually load the symbol table of a library
-# whose symbols weren't loaded.  (We'll pick the last one.)
-#
-
-# I moved this test inside the one above, because the expect_out array is not ok if the
-# previous test has failed, and expect would error out (elz)
-#
-#send_gdb "add-symbol-file lib02_$testfile.sl $expect_out(1,string)\n"
-#gdb_expect {
-#  -re "add symbol table.*y or n.*$"\
-#          {send_gdb "y\n"
-#           gdb_expect {
-#             -re "$gdb_prompt $" {pass "add-symbol-file"}
-#             timeout {fail "(timeout) add-symbol-file"}
-#           }}
-#  -re "$gdb_prompt $"\
-#          {fail "add-symbol-file"}
-#  timeout {fail "(timeout) add-symbol-file"}
-#}
-
-# Verify that we can manually load the symbols for all libraries
-# which weren't already loaded.
-#
-# Warning!  On a machine with little free swap space, this may
-# fail!
-#
-send_gdb "sharedlibrary\n"
-gdb_expect {
-  -re "Reading symbols from.*done.*$gdb_prompt $"\
-          {pass "sharedlibrary"}
-  -re "$gdb_prompt $" {
-	setup_xfail hppa*-*-* CHFts24108
-	fail "sharedlibrary"
-    }
-  timeout {fail "(timeout) sharedlibrary"}
-}
-
-# Rerun the program, this time verifying that we can set the
-# threshhold high enough to avoid hitting it.
-#
-# It appears that gdb isn't freeing memory when rerunning, as one
-# would expect.  To avoid potentially hitting a virtual memory
-# ceiling, start with a fresh gdb.
-#
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-send_gdb "break main\n"
-gdb_expect {
-  -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\
-          {pass "2 set break at main"}
-  -re "$gdb_prompt $"\
-          {fail "2 set break at main"}
-  timeout {fail "(timeout) 2 set break at main"}
-}
-
-send_gdb "set auto-solib-limit 9999\n"
-gdb_expect {
-  -re "$gdb_prompt $"\
-          {pass "set auto-solib-limit threshold to practical infinity"}
-  timeout {fail "(timeout) set auto-solib-limit threshold to practical infinity"}
-}
-send_gdb "run\n"
-gdb_expect {
-  -re ".*warning. Symbols for some libraries have not been loaded, because.*
-doing so would exceed the size threshold specified by auto-solib-limit.*
-To manually load symbols, use the 'sharedlibrary' command.*
-To raise the threshold, set auto-solib-limit to a larger value and rerun.*
-the program.*$gdb_prompt $"\
-          {fail "rerun threshold at practical infinity (still hit threshold)"}
-  -re "$gdb_prompt $"\
-          {pass "rerun with threshold at practical infinity"}
-  timeout {fail "(timeout) rerun with threshold at practical infinity"}
-}
-
-# Rerun the program, this time altogether disabling the auto loading
-# feature.  There should be no information at all about shared
-# libraries now.
-#
-# ??rehrauer: Personally, I'd call that a bug, since it doesn't give
-# you the ability to manually load single shlibs (you need the text
-# start address that 'info share' normall gives you).  On the other
-# hand, one can easily choose to load them all...
-#
-# It appears that gdb isn't freeing memory when rerunning, as one
-# would expect.  To avoid potentially hitting a virtual memory
-# ceiling, start with a fresh gdb.
-#
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-send_gdb "break main\n"
-gdb_expect {
-  -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\
-          {pass "3 set break at main"}
-  -re "$gdb_prompt $"\
-          {fail "3 set break at main"}
-  timeout {fail "(timeout) 3 set break at main"}
-}
-
-send_gdb "set auto-solib-limit 0\n"
-gdb_expect {
-  -re "$gdb_prompt $"\
-          {pass "set auto-solib-limit threshold to 0"}
-  timeout {fail "(timeout) set auto-solib-limit threshold to 0"}
-}
-send_gdb "run\n"
-gdb_expect {
-  -re ".*warning. Symbols for some libraries have not been loaded, because.*
-doing so would exceed the size threshold specified by auto-solib-limit.*
-To manually load symbols, use the 'sharedlibrary' command.*
-To raise the threshold, set auto-solib-limit to a larger value and rerun.*
-the program.*$gdb_prompt $"\
-          {fail "rerun threshold at 0 (still hit threshold)"}
-  -re "$gdb_prompt $"\
-          {pass "rerun with threshold at 0"}
-  timeout {fail "(timeout) rerun with threshold at 0"}
-}
-
-# Verify that we can still manually load symbols for all libraries.
-# (We'll assume that if the last shlib's symbols are loaded, that
-# all of them were.)
-#
-# Note that we set the GDB "height" variable to prevent GDB from
-# prompting 
-#
-# Warning!  On a machine with little free swap space, this may
-# fail!
-#
-send_gdb "set height 9999\n"
-gdb_expect {
-  -re "$gdb_prompt $"\
-          {pass "set screen page height to practical infinity"}
-  timeout {fail "(timeout) set screen page height to practical infinity"}
-}
-send_gdb "sharedlibrary\n"
-gdb_expect {
-  -re ".*Reading symbols from .*/lib02-so-thresh\\.sl\\.\\.\\.done\\..*$gdb_prompt $"\
-          {pass "manually load all symbols"}
-  -re "$gdb_prompt $" {
-	setup_xfail hppa*-*-* CHFts24108
-	fail "manually load all symbols (CHFts24108)"
-    }
-  timeout {fail "(timeout) manually load all symbols"}
-}
-
-return 0
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.mk b/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.mk
deleted file mode 100644
index f71e921..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.mk
+++ /dev/null
@@ -1,74 +0,0 @@
-# Make file for so-thresh test
-
-OBJDIR=.
-SRCDIR=.
-CFLAGS = +DA1.1 -g
-CC=cc
-
-# This is how to build this generator.
-genso-thresh.o: ${SRCDIR}/genso-thresh.c
-	$(CC) $(CFLAGS) -o genso-thresh.o -c ${SRCDIR}/genso-thresh.c
-genso-thresh: genso-thresh.o
-	$(CC) $(CFLAGS) -o genso-thresh genso-thresh.o
-
-# This is how to run this generator.
-# This target should be made before the 'all' target,
-# to ensure that the shlib sources are all available.
-require_shlibs: genso-thresh
-	if ! [ -a lib00-so-thresh.c ] ; then \
-	  genso-thresh ; \
-	fi
-	if ! [ -a lib01-so-thresh.c ] ; then \
-	  genso-thresh ; \
-	fi
-	if ! [ -a lib02-so-thresh.c ] ; then \
-	  genso-thresh ; \
-	fi
-
-# This is how to build all the shlibs.
-# Be sure to first make the require_shlibs target!
-lib00-so-thresh.o: lib00-so-thresh.c
-	$(CC) $(CFLAGS) +Z -o lib00-so-thresh.o -c lib00-so-thresh.c
-lib00-so-thresh.sl: lib00-so-thresh.o
-	$(LD) $(LDFLAGS) -b -o lib00-so-thresh.sl lib00-so-thresh.o
-lib01-so-thresh.o: lib01-so-thresh.c
-	$(CC) $(CFLAGS) +Z -o lib01-so-thresh.o -c lib01-so-thresh.c
-lib01-so-thresh.sl: lib01-so-thresh.o
-	$(LD) $(LDFLAGS) -b -o lib01-so-thresh.sl lib01-so-thresh.o
-lib02-so-thresh.o: lib02-so-thresh.c
-	$(CC) $(CFLAGS) +Z -o lib02-so-thresh.o -c lib02-so-thresh.c
-lib02-so-thresh.sl: lib02-so-thresh.o
-	$(LD) $(LDFLAGS) -b -o lib02-so-thresh.sl lib02-so-thresh.o
-
-
-
-
-# For convenience, here's names for all pieces of all shlibs.
-SHLIB_SOURCES = \
-	lib00-so-thresh.c \
-	lib01-so-thresh.c \
-	lib02-so-thresh.c 
-
-SHLIB_OBJECTS = $(SHLIB_SOURCES:.c=.o)
-SHLIBS = $(SHLIB_SOURCES:.c=.sl)
-SHLIB_NAMES = $(SHLIB_SOURCES:.c=)
-EXECUTABLES = $(SHLIBS) genso-thresh so-thresh
-OBJECT_FILES = $(SHLIB_OBJECTS) genso-thresh.o so-thresh.o
-
-shlib_objects: $(SHLIB_OBJECTS)
-shlibs: $(SHLIBS)
-
-# This is how to build the debuggable testcase that uses the shlibs.
-so-thresh.o: so-thresh.c
-	$(CC) $(CFLAGS) -o so-thresh.o -c so-thresh.c
-so-thresh: shlibs so-thresh.o
-	$(LD) $(LDFLAGS) -o so-thresh -lc -L${OBJDIR} -c so-thresh.lopt /opt/langtools/lib/end.o /lib/crt0.o so-thresh.o
-
-# Yeah, but you should first make the require_shlibs target!
-all: so-thresh genso-thresh
-
-# To remove everything built via this makefile...
-clean:
-	rm -f lib0*-so-thresh.*
-	rm -f *.o genso-thresh so-thresh.lopt so-thresh.c
-	rm -f so-thresh
diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.sh b/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.sh
deleted file mode 100755
index 078e05a..0000000
--- a/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh
-
-# so-thresh.sh
-#
-# This script is a "wrapper" to use the so-thresh.mk
-# Makefile.  See the comments in so-thresh.exp
-# regarding why this script exists.
-
-#set -o xtrace
-#set -o verbose
-
-if [ "$srcdir" = "${srcdir#/}" ]
-then
-    srcdir="$PWD/$srcdir"
-fi
-
-if [ "$objdir" = "${objdir#/}" ]
-then
-    objdir="$PWD/$objdir"
-fi
-
-subdir="$1"
-
-HERE=$PWD
-cd $subdir
-
-MAKEFLAGS=
-make -f ${srcdir}/${subdir}/so-thresh.mk clean require_shlibs all SRCDIR=${srcdir}/${subdir} OBJDIR=${objdir}/${subdir} > ${objdir}/${subdir}/so-thresh.make.out 2>&1
-STATUS=$?
-
-cd $HERE
-echo "return STATUS is $STATUS"
-
-exit $STATUS
diff --git a/gdb/testsuite/gdb.hp/gdb.compat/Makefile.in b/gdb/testsuite/gdb.hp/gdb.compat/Makefile.in
deleted file mode 100644
index 10fc8fc..0000000
--- a/gdb/testsuite/gdb.hp/gdb.compat/Makefile.in
+++ /dev/null
@@ -1,25 +0,0 @@
-VPATH = @srcdir@
-srcdir = @srcdir@
-
-EXECUTABLES = xdb xdb-test
-
-all:
-	@echo "Nothing to be done for all..."
-
-info:
-install-info:
-dvi:
-install:
-uninstall: force
-installcheck:
-check:
-
-clean mostlyclean:
-	-rm -f *~ *.o *.ci
-	-rm -f *.dwo *.dwp
-	-rm -f core $(EXECUTABLES)
-
-distclean maintainer-clean realclean: clean
-	-rm -f Makefile config.status config.log
-	-rm -f *-init.exp
-	-rm -fr *.log summary detail *.plog *.sum *.psum site.*
diff --git a/gdb/testsuite/gdb.hp/gdb.compat/average.c b/gdb/testsuite/gdb.hp/gdb.compat/average.c
deleted file mode 100644
index 25ba2ee..0000000
--- a/gdb/testsuite/gdb.hp/gdb.compat/average.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/* This is a sample program for the HP WDB debugger. */
-
-#include <stdio.h>
-#include <stdlib.h>
-
-#ifdef PROTOTYPES
-extern int sum(int *, int, int);
-#else
-extern int sum();
-#endif
-
-#define num   10
-
-static int my_list[num] = {3,4,2,0,2,1,8,3,6,7};
-
-#ifdef __STDC__
-void print_average(int *list, int low, int high) 
-#else
-void print_average(list, low, high)
-int *list, low, high;
-#endif
-    {
-        int total = 0, num_elements = 0, average = 0;
-        total = sum(list, low, high);
-        num_elements = high - low;  /* note this is an off-by-one bug */
-
-        average = total / num_elements;
-        printf("%10.d\n", average);
-    }
-
-#ifdef __STDC__
-int main(void)
-#else
-main ()
-#endif
-{
-    char c;
-    int first = 0, last = 0;
-    last = num-1;
-
-    /* Try two test cases. */
-    print_average (my_list, first, last);
-    print_average (my_list, first, last - 3);
-
-    exit(0);
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.compat/sum.c b/gdb/testsuite/gdb.hp/gdb.compat/sum.c
deleted file mode 100644
index d295f7e..0000000
--- a/gdb/testsuite/gdb.hp/gdb.compat/sum.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/* This is a sample program for the HP/DDE debugger. */
-#include <stdio.h>
-
-#ifdef __STDC__
-int sum(int *list, int low, int high)
-#else
-int sum(list, low, high)
-int *list, low, high;
-#endif
-    {
-        int i = 0, s = 0;
-        for (i = low; i <= high; i++)
-            s += list[i];
-        return(s);
-    }
diff --git a/gdb/testsuite/gdb.hp/gdb.compat/xdb.c b/gdb/testsuite/gdb.hp/gdb.compat/xdb.c
deleted file mode 100644
index e3e3fc2..0000000
--- a/gdb/testsuite/gdb.hp/gdb.compat/xdb.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#include <stdio.h>
-
-int callee( x )
-int x;
-{
-    int y = x * x;
-    return (y - 2);
-}
-
-main()
-{
-    int i;
-    for (i = 1; i < 10; i++)
-        {
-            printf( "%d ", callee( i ));
-            
-        }
-    printf( " Goodbye!\n" );
-    
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.compat/xdb0.c b/gdb/testsuite/gdb.hp/gdb.compat/xdb0.c
deleted file mode 100644
index 4cd29c3..0000000
--- a/gdb/testsuite/gdb.hp/gdb.compat/xdb0.c
+++ /dev/null
@@ -1,39 +0,0 @@
-#include "xdb0.h"
-
-main ()
-{
-    int x;
-
-    x = 0;
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-    foo (x++);
-}
-
-static void
-unused ()
-{
-    /* Not used for anything */
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.compat/xdb0.h b/gdb/testsuite/gdb.hp/gdb.compat/xdb0.h
deleted file mode 100644
index c4d337c..0000000
--- a/gdb/testsuite/gdb.hp/gdb.compat/xdb0.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* An include file that actually causes code to be generated in the
-   including file.  This is known to cause problems on some systems. */
-
-static void
-foo (x)
-int x;
-{
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-    bar (x++);
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.compat/xdb1.c b/gdb/testsuite/gdb.hp/gdb.compat/xdb1.c
deleted file mode 100644
index 51632b9..0000000
--- a/gdb/testsuite/gdb.hp/gdb.compat/xdb1.c
+++ /dev/null
@@ -1,33 +0,0 @@
-void
-bar (x)
-int x;
-{
-    printf ("%d\n", x);
-
-    long_line ();
-}
-
-static void
-unused ()
-{
-    /* Not used for anything */
-}
-
-
-/* This routine has a very long line that will break searching in older
-   versions of GDB.  */
-
-long_line ()
-{
-  oof (67);
-
-  oof (6789);
-
-  oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*  5 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 10 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 15 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 20 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 25 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 30 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 35 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 40 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 45 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 50 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 55 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 60 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 65 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (1234); /* 70 */
-}
-
-oof (n)
-     int n;
-{
-  return n + 1;
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.compat/xdb1.exp b/gdb/testsuite/gdb.hp/gdb.compat/xdb1.exp
deleted file mode 100644
index f0d5d98..0000000
--- a/gdb/testsuite/gdb.hp/gdb.compat/xdb1.exp
+++ /dev/null
@@ -1,67 +0,0 @@
-# Copyright (C) 1992-2015 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
-
-# This file was written by Fred Fish. (fnf@cygnus.com)
-
-if { [skip_hp_tests] } then { continue }
-
-#
-# test running programs
-#
-
-set testfile "xdb"
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
-if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
-     untested xdb1.exp
-     return -1
-}
-
-if [get_compiler_info] {
-    return -1
-}
-if { $gcc_compiled } then { continue }
-
-global GDBFLAGS
-set saved_gdbflags $GDBFLAGS
-
-set GDBFLAGS "$GDBFLAGS --xdb"
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-gdb_test "set pagination off" ""
-gdb_test "show pagination" "State of pagination is off."
-gdb_test "set pagination on" ""
-gdb_test "show pagination" "State of pagination is on."
-
-gdb_test "txbreak callee" "Breakpoint.*at.*"
-gdb_test "info break" "Num.*Type.*Disp.*Enb.*Address.*What\r\n.*breakpoint.*del.*y.*"
-
-gdb_test "xbreak callee" "Breakpoint.*at.*.*"
-gdb_test "info break" "Num.*Type.*Disp.*Enb.*Address.*What\r\n.*breakpoint.*keep.*y.*"
-
-gdb_exit
-set GDBFLAGS $saved_gdbflags
-return 0
-
-
-
-
-
-
-
diff --git a/gdb/testsuite/gdb.hp/gdb.compat/xdb2.exp b/gdb/testsuite/gdb.hp/gdb.compat/xdb2.exp
deleted file mode 100644
index 6a8754e..0000000
--- a/gdb/testsuite/gdb.hp/gdb.compat/xdb2.exp
+++ /dev/null
@@ -1,95 +0,0 @@
-# Copyright (C) 1992-2015 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
-
-# This file was written by Fred Fish. (fnf@cygnus.com)
-
-if { [skip_hp_tests] } then { continue }
-
-global message
-
-#
-# test running programs
-#
-
-set testfile "xdb"
-set binfile ${objdir}/${subdir}/${testfile}
-
-if  { [gdb_compile "${srcdir}/${subdir}/xdb0.c" "${binfile}0.o" object {debug}] != "" } {
-    perror "Couldn't compile ${testfile}0.c to object"
-    return -1
-}
-
-if  { [gdb_compile "${srcdir}/${subdir}/xdb1.c" "${binfile}1.o" object {debug}] != "" } {
-    perror "Couldn't compile ${testfile}1.c to object"
-    return -1
-}
-
-if  { [gdb_compile "${binfile}0.o ${binfile}1.o" ${binfile} executable {debug}] != "" } {
-    perror "Couldn't link ${testfile}."
-    return -1
-}
-
-if [get_compiler_info] {
-    return -1
-}
-
-if { $gcc_compiled } then { continue }
-
-global GDBFLAGS
-set saved_gdbflags $GDBFLAGS
-set GDBFLAGS "$GDBFLAGS --xdb"
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-gdb_test "break main" ""
-gdb_test "run" ""
-gdb_test "go +2" "Breakpoint.*at.*file.*xdb0\.c, line 12\.\r\nContinuing at.*\r\nmain \\(\\) at.*xdb0\.c:12\r\n12\[ \t\]+foo \\(x\\+\\+\\);"
-gdb_test "go -2" "Note: breakpoint.*also set at pc.*\.\r\nBreakpoint.*at.*file.*xdb0\.c, line 10\.\r\nContinuing at.*\.\r\n\r\nBreakpoint.*, main \\(\\) at.*xdb0\.c:10.*"
-gdb_test "go 16" "Breakpoint.*at.*file.*xdb0\.c, line 16\.\r\nContinuing at.*\.\r\nmain \\(\\) at.*xdb0\.c:16\r\n16\[ \t\]+foo \\(x\\+\\+\\);"
-
-send_gdb "go bar\n"
-  gdb_expect {
-      -re ".*Line 5 is not in .main..  Jump anyway.*y or n. $" {
-          send_gdb "y\n"
-          gdb_expect {
-            -re "$gdb_prompt $"\
-                    {pass "go bar"}
-            timeout {fail "(timeout) go bar"}
-          }
-      }
-      -re "Continuing at.*\.\r\nbar \\(x=0\\) at.*xdb1\.c:5" {}
-      timeout { perror "(timeout) go bar" ; return }
-  }
-
-# Verify that GDB responds gracefully to a "go" command without
-# an argument.
-#
-gdb_test "go" "Usage: go <location>"
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-gdb_test "break bar" ""
-gdb_test "run" ""
-gdb_test "backtrace full" ".*bar \\(x=0\\) at.*xdb1\.c:5\r\nNo locals\.\r\n.1.* in foo \\(x=1\\) at.*xdb0\.h:8\r\nNo locals\.\r\n.2.* in main \\(\\) at.*xdb0\.c:11\r\n.*x = 1"
-gdb_test "bt 1 full" ".*bar \\(x=0\\) at.*xdb1\.c:5\r\nNo locals\.\r\n\\(More stack frames follow\.\.\.\\)"
-gdb_test "bt full 2" ".*bar \\(x=0\\) at.*xdb1\.c:5\r\nNo locals\.\r\n.1.* in foo \\(x=1\\) at.*xdb0\.h:8\r\nNo locals\.\r\n\\(More stack frames follow\.\.\.\\)"
-
-set GDBFLAGS $saved_gdbflags
-return 0
diff --git a/gdb/testsuite/gdb.hp/gdb.compat/xdb3.exp b/gdb/testsuite/gdb.hp/gdb.compat/xdb3.exp
deleted file mode 100644
index 6a898b3..0000000
--- a/gdb/testsuite/gdb.hp/gdb.compat/xdb3.exp
+++ /dev/null
@@ -1,316 +0,0 @@
-# Copyright (C) 1998-2015 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
-
-
-if { [skip_hp_tests] } then { continue }
-
-set testfile1 "average"
-set testfile2 "sum"
-set testfile "xdb-test"
-set binfile1 ${objdir}/${subdir}/${testfile1}
-set binfile2 ${objdir}/${subdir}/${testfile2}
-set binfile ${objdir}/${subdir}/${testfile}
-
-if  { [gdb_compile "${srcdir}/${subdir}/average.c" "${binfile1}.o" object {debug}] != "" } {
-     untested xdb3.exp
-     return -1
-}
-
-if  { [gdb_compile "${srcdir}/${subdir}/sum.c" "${binfile2}.o" object {debug}] != "" } {
-     untested xdb3.exp
-     return -1
-}
-
-if  { [gdb_compile "${binfile1}.o ${binfile2}.o" ${binfile} executable {debug}] != "" } {
-     untested xdb3.exp
-     return -1
-}
-
-if [get_compiler_info] {
-    return -1
-}
-if { $gcc_compiled } then { continue }
-
-
-proc xdb_reinitialize_dir { subdir } {
-    global gdb_prompt
-
-   send_gdb "D\n"
-    gdb_expect {
-        -re "Reinitialize source path to empty.*y or n. " {
-            send_gdb "y\n"
-            gdb_expect {
-                -re "Source directories searched.*$gdb_prompt $" {
-                    send_gdb "D $subdir\n"
-                    gdb_expect {
-                        -re "Source directories searched.*$gdb_prompt $" {
-                            verbose "Dir set to $subdir"
-                        }
-                        -re ".*$gdb_prompt $" {
-                            perror "Dir \"$subdir\" failed."
-                        }
-                    }
-                }
-                -re ".*$gdb_prompt $" {
-                    perror "Dir \"$subdir\" failed."
-                }
-            }
-        }
-        -re ".*$gdb_prompt $" {
-            perror "Dir \"$subdir\" failed."
-        }
-    }
-}
-
-#
-#test_search
-#
-proc test_search { } {
-    gdb_test "set listsize 4" ""
-    gdb_test "list average.c:1" "1\[ \t\]+/. This is a sample .*"
-    gdb_test "/ print_average" "17\[ \t\]+void print_average\\(int \\*list.*"
-    gdb_test "/ print_average" "19\[ \t\]+void print_average\\(list, low, high\\)"
-    gdb_test "/ print_average" "42\[ \t\]+print_average \\(my_list, first, last\\);"
-    gdb_test "? print_average" "19\[ \t\]+void print_average\\(list, low, high\\)"
-    gdb_test "? sum" "9\[ \t]+extern int sum\\(\\);"
-}
-
-#
-#test_viewing_loc
-#
-proc test_viewing_loc { } {
-    gdb_test "L" "No stack."
-    gdb_test "break main" ""
-    gdb_test "R" ""
-    gdb_test "L" "#0\[ \t\]+main \\(\\) at.*average.c:38\r\n38\[ \t\]+int first = 0, last = 0;"
-}
-
-#
-#test_dir_list
-#
-proc test_dir_list { } {
-    gdb_test "ld" "Source directories searched: .*"
-}
-
-#
-#test_list_sources
-#
-proc test_list_sources { } {
-    if [istarget "hppa64-*-*"] {
-	gdb_test "lf" "Source files for which symbols have been read in:\r\n\r\n.*average\\.c.*Source files for which symbols will be read in on demand:\r\n\r\nglobals,.*\[se\]\[un\]\[md\]\\.c.*\[se\]\[un\]\[md\]\\.c"
-    } else {
-	gdb_test "lf" "Source files for which symbols have been read in:\r\n\r\n.*average\\.c.*\r\n\r\nSource files for which symbols will be read in on demand:\r\n\r\nglobals, end\\.c,.*sum\\.c"
-    }
-}
-#
-#test_vlist
-#
-proc test_vlist { } {
-    gdb_test "v main" "34\[ \t\]+main \\(\\)\r\n35\[ \t\]+#endif\r\n36\[ \t\]+.\r\n37\[ \t\]+char c;"
-}
-
-#
-#test_va
-#
-proc test_va { } {
-    if [istarget "hppa64-*-*"] {
-	gdb_test "va main" "Dump of assembler code for function main:\r\n.*0x.* <main>:\[ \t\]+std %rp,-0x10\\(%sp\\)\r\n0x.* <main\\+4>:\[ \t\]+std,ma %r3,0xd0\\(%sp\\)\r\n.*0x.* <main\\+8>:\[ \t\]+std %r4,-0xc8\\(%sp\\)\r\n.*0x.* <main\\+12>:\[ \t\]+copy %ret1,%r3\r\n.*"
-    } else {
-	gdb_test "va main" "Dump of assembler code for function main:\r\n.*0x.* <main>:\[ \t\]+stw %rp,-0x14\\(%sr0,%sp\\)\r\n0x.* <main\\+4>:\[ \t\]+ldo 0x\[48\]0\\(%sp\\),%sp\r\n.*0x.* <main\\+8>:\[ \t\]+stw %r0,-0x.*\\(%sr0,%sp\\)\r\n.*0x.* <main\\+12>:\[ \t\]+stw %r0,-0x.*\\(%sr0,%sp\\)\r\n.*"
-    }
-}
-
-#
-#test_list_globals
-#
-proc test_list_globals { } {
-    gdb_test "lg" "All defined variables:\r\n\r\nFile globals:.*"
-#    gdb_test "lg" "All defined variables:\r\n\r\nFile globals:\r\nchar __buffer.512.;\r\nint __d_eh_catch_catch;\r\nint __d_eh_catch_throw;.*"
-}
-
-#
-#test_list_registers
-#
-proc test_list_registers { } {
-    if [istarget "hppa64-*-*"] {
-	gdb_test "lr" "\[ \t\]+flags:.*r17:.*pcsqh:.*cr0:.*\r\n\[ \t\]+r1:.*r18:.*pcoqt:.*cr8:.*"
-    } else {
-	gdb_test "lr" "\[ \t\]+flags:.*r18:.*pcsqt:.*ccr:.*\r\n\[ \t\]+r1:.*r19:.*eiem:.*cr12:.*"
-    }
-    gdb_test "lr r1" "r1 .*"
-}
-
-#
-#test_backtrace
-#
-proc test_backtrace { } {
-    gdb_test "t" "#0  main \\(\\) at.*average.c:39"
-    gdb_test "T" "#0  main \\(\\) at.*average.c:39\r\n\[ \t\]+c = *.*\r\n\[ \t\]+first = 0\r\n\[ \t\]+last = 0"
-
-    gdb_test "break sum" ""
-    gdb_test "cont" ""
-    gdb_test "next"
-
-    gdb_test "t" "#0  sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:12\r\n#1  0x.* in print_average \\(list=0x.*, low=0, high=9\\) at.*average\.c:24\r\n#2  0x.* in main \\(\\) at.*average\.c:42"
-    gdb_test "t 1" "#0  sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:12\r\n\\(More stack frames follow\.\.\.\\)"
-    gdb_test "T" "#0  sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:12\r\n\[ \t\]+i = 0\r\n\[ \t\]+s = 0\r\n#1  0x.* in print_average \\(list=0x.*, low=0, high=9\\) at.*average\.c:24\r\n\[ \t\]+total = 0\r\n\[ \t\]+num_elements = 0\r\n\[ \t\]+average = 0\r\n#2  0x.* in main \\(\\) at.*average\.c:42\r\n\[ \t\]+c = *.*\r\n\[ \t\]+first = 0\r\n\[ \t\]+last = 9"
-    gdb_test "T 1" "#0  sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:12\r\n\[ \t\]+i = 0\r\n\[ \t\]+s = 0\r\n\\(More stack frames follow\.\.\.\\)"
-
-    gdb_test "V" "#0  sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:12\r\n\\12\[ \t\]+for \\(i = low;.*\\)"
-    gdb_test "V 1" "#1  0x.* in print_average \\(list=0x.*, low=0, high=9\\) at.*average\.c:24\r\n24\[ \t\]+total = sum\\(list, low, high\\);"
-}
-
-#
-# test_go
-#
-proc test_go { }  {
-    gdb_test "break main" ""
-    gdb_test "R" ""
-
-    gdb_test "g +1" "Breakpoint.*at 0x.*: file.*average\.c, line 39\.\r\nContinuing at 0x.*\.\r\nmain \\(\\) at.*average\.c:39\r\n39\[ \t\]+last = num-1;"
-    gdb_test "g 42" "Breakpoint.*at 0x.*: file.*average\.c, line 42\.\r\nContinuing at 0x.*\.\r\nmain \\(\\) at.*average\.c:42\r\n42\[ \t\]+print_average \\(my_list, first, last\\);"
-
-}
-
-#
-#test_breakpoints
-#
-proc test_breakpoints { } {
-    global gdb_prompt
-
-    gdb_test "sb" ""
-    gdb_test "lb" "Num.*Type.*Disp.*Enb.*Address.*What\r\n1\[ \r\]+breakpoint\[ \r\]+keep n.*in main at.*average\.c:38.*"
-    gdb_test "ab" ""
-    gdb_test "lb" "Num.*Type.*Disp.*Enb.*Address.*What\r\n1\[ \r\]+breakpoint\[ \r\]+keep y.*in main at.*average\.c:38.*"
-    gdb_test "ba sum" "Breakpoint.*at.*: file.*sum\.c, line 11\."
-    gdb_test "cont" ""
-    gdb_test "bx" "Breakpoint.*at.*: file.*sum.c, line 15\."
-    #gdb_test "bx if (1)" "Breakpoint.*at.*: file.*sum.c, line 15\."
-    gdb_test "bx 1" "Breakpoint.*at.*: file.*average.c, line 29\."
-    gdb_test "bx 1 if (1)" "Breakpoint.*at.*: file.*average.c, line 29\."
-    gdb_test "bc 1 2" "Will ignore next 2 crossings of breakpoint 1\."
-    gdb_test "lb 1" "Num.*Type.*Disp.*Enb.*Address.*What\r\n1\[ \r\]+breakpoint\[ \r\]+keep y.*in main at.*average\.c:38\r\n.*breakpoint already hit 1 time\r\n.*ignore next 2 hits.*"
-
-    send_gdb "db\n"
-    gdb_expect {
-        -re "Delete all breakpoints.*y or n. $" {
-            send_gdb "y\n"
-            exp_continue
-        }
-        -re "y\r\n$gdb_prompt $" {}
-        -re ".*$gdb_prompt $" { # This happens if there were no breakpoints
-            }
-        timeout { perror "Delete all breakpoints (timeout)" ; return }
-    }
-    send_gdb "lb\n"
-    gdb_expect {
-        -re "No breakpoints or watchpoints..*$gdb_prompt $" {}
-        -re ".*$gdb_prompt $" { perror "breakpoints not deleted" ; return }
-        timeout { perror "info breakpoints (timeout)" ; return }
-    }
-gdb_test "xbreak" "Breakpoint.*at.*file.*sum.c, line 15."
-gdb_test "xbreak print_average" "Breakpoint.*at.*file.*average.c, line 29."
-gdb_test "xbreak if (1)" "Note: breakpoint.*also set at pc.*Breakpoint.*at.*file.*sum.c, line 15."
-gdb_test "xbreak print_average if (1)" "Note: breakpoint.*also set at pc.*Breakpoint.*at.*file.*average.c, line 29."
-
-    send_gdb "lb\n"
-    gdb_expect {
-        -re "Num Type           Disp Enb Address    What.*breakpoint     keep y.*sum.c:15.*breakpoint     keep y.*average.c:29.*breakpoint     keep y.*sum.c:15.*stop only if 1.*breakpoint     keep y.*average.c:29.*stop only if 1.*$gdb_prompt $" {pass "lb on xbreaks"}
-        -re ".*$gdb_prompt $" { fail "breakpoints not deleted"}
-        timeout { fail "info breakpoints (timeout)" }
-    }
-
-}
-
-#
-# test_signals 
-#
-proc test_signals { } {
-    gdb_test "handle SIGTERM nostop noprint" ""
-    gdb_test "z 15 s" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*Yes.*Yes.*Yes.*Terminated"
-    gdb_test "z 15 r" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*No.*No.*Yes.*Terminated"
-    gdb_test "z 15 i" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*No.*No.*No.*Terminated"
-    gdb_test "z 15 r" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*No.*Yes.*No.*Terminated"
-    gdb_test "z 15 Q" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*No.*No.*No.*Terminated"
-    gdb_test "lz" "Signal.*Stop.*Print.*Pass to program.*Description\r\n\r\nSIGHUP.*Yes.*"
-}
-
-
-
-# Start with a fresh gdb.
-global GDBFLAGS
-set saved_gdbflags $GDBFLAGS
-
-set GDBFLAGS "$GDBFLAGS --xdb"
-
-gdb_exit
-gdb_start
-
-xdb_reinitialize_dir $srcdir/$subdir
-
-gdb_load ${binfile}
-send_gdb "set width 0\n"
-gdb_expect -re "$gdb_prompt $"
-test_search
-test_viewing_loc
-test_dir_list
-test_list_sources
-test_vlist
-test_va
-gdb_test "next"
-gdb_test "l" "No arguments.\r\nc = *.*\r\nfirst = 0\r\nlast = 0"
-#test_list_globals
-test_list_registers
-test_backtrace
-
-# Start with a fresh gdb.
-
-gdb_exit
-gdb_start
-xdb_reinitialize_dir $srcdir/$subdir
-
-gdb_load ${binfile}
-send_gdb "set width 0\n"
-gdb_expect -re "$gdb_prompt $"
-test_go
-
-
-gdb_exit
-gdb_start
-xdb_reinitialize_dir $srcdir/$subdir
-
-gdb_load ${binfile}
-send_gdb "set width 0\n"
-gdb_expect -re "$gdb_prompt $"
-gdb_test "break main" ""
-gdb_test "R" ""
-gdb_test "S" "39\[ \t\]+last = num-1;"
-test_breakpoints
-test_signals
-gdb_test "sm" ""
-gdb_test "info set" ".*pagination:  State of pagination is off.*"
-gdb_test "am" ""
-gdb_test "info set" ".*pagination:  State of pagination is on.*"
-gdb_exit
-
-set GDBFLAGS $saved_gdbflags
-
-return 0
-
-
-
-
-
-
diff --git a/gdb/testsuite/gdb.hp/gdb.defects/Makefile.in b/gdb/testsuite/gdb.hp/gdb.defects/Makefile.in
deleted file mode 100644
index feb456e..0000000
--- a/gdb/testsuite/gdb.hp/gdb.defects/Makefile.in
+++ /dev/null
@@ -1,25 +0,0 @@
-VPATH = @srcdir@
-srcdir = @srcdir@
-
-EXECUTABLES = bs14602 bs15503 solib-d solib-d1.sl solib-d2.sl
-
-all:
-	@echo "Nothing to be done for all..."
-
-info:
-install-info:
-dvi:
-install:
-uninstall: force
-installcheck:
-check:
-
-clean mostlyclean:
-	-rm -f *~ *.o *.ci
-	-rm -f *.dwo *.dwp
-	-rm -f core $(EXECUTABLES)
-
-distclean maintainer-clean realclean: clean
-	-rm -f Makefile config.status config.log
-	-rm -f *-init.exp
-	-rm -fr *.log summary detail *.plog *.sum *.psum site.*
diff --git a/gdb/testsuite/gdb.hp/gdb.defects/bs14602.c b/gdb/testsuite/gdb.hp/gdb.defects/bs14602.c
deleted file mode 100644
index 232b408..0000000
--- a/gdb/testsuite/gdb.hp/gdb.defects/bs14602.c
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Test file for bs14602.exp */
-
-double      v_double = 0;
-long double v_long_double = 12345.67890;
-
-int main () {
-  v_double = 0;
-  v_long_double = 12345.67890;
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.defects/bs14602.exp b/gdb/testsuite/gdb.hp/gdb.defects/bs14602.exp
deleted file mode 100644
index 0458922..0000000
--- a/gdb/testsuite/gdb.hp/gdb.defects/bs14602.exp
+++ /dev/null
@@ -1,111 +0,0 @@
-# This file was written by Sue Kimura. (sue_kimura@hp.com)
-#
-# Test for CLLbs14602 -- problem with recognizing long double on 10.20.
-#
-# Source file: bs14602.c
-
-if { [skip_hp_tests] } { continue }
-
-#
-# test running programs
-#
-
-
-set testfile bs14602
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
-
-# Create and source the file that provides information about the compiler
-# used to compile the test case.
-if [get_compiler_info] {
-    return -1
-}
-
-# set up appropriate compile option to recognize long double
-if {$hp_aCC_compiler || $hp_cc_compiler} {
-    set ansi_option "-Ae"
-} else {
-    set ansi_option ""
-}
-
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "$binfile" executable "debug {additional_flags=${ansi_option}}"] != "" } {
-    perror "Couldn't compile ${srcfile}"
-    return -1
-}
-
-
-# Start with a fresh gdb.
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load $binfile
-
-
-# get to end of main so we can check out some stuff
-if ![runto main] {
-  perror "couldn't run to breakpoint main"
-  continue
-}
-
-gdb_test "txbreak" \
-    "Breakpoint $decimal at $hex: file .*bs14602.c, line 9." \
-    "set breakpoint at end of main"
-
-gdb_test "continue" \
-    "Continuing.\r\n$hex in main* \\(\\) at .*bs14602.c:9\r\n.*" \
-    "continue to end of main"
-
-# test some simple things about long double
-gdb_test "whatis v_long_double" \
-    "type = long double" \
-    "whatis v_long_double"
-
-gdb_test "ptype v_long_double" \
-    "type = long double" \
-    "ptype v_long_double"
-
-gdb_test "print sizeof \(long double\)" \
-    " = 16" \
-    "print sizeof long double"
-
-gdb_test "print sizeof \(v_long_double\)" \
-    " = 16" \
-    "print sizeof v_long_double"
-
-gdb_test "print v_long_double"  \
-    " = 12345.67890000000079453457146883011" \
-    "print v_long_double - 1" 
-
-gdb_test "set variable v_long_double = 98765.43210" \
-    "" \
-    "set variable v_long_double to constant value"
-
-gdb_test "print v_long_double" \
-    " = 98765.43210000000544823706150054932" \
-    "print v_long_double - 2" 
-
-gdb_test "set variable v_double = v_long_double" \
-    "" \
-    " set variable v_double with v_long_double"
-
-gdb_test "print v_double" \
-    " = 98765.432100000005" \
-    " print v_double"
-
-#reset v_long_double
-gdb_test "set variable v_long_double = 0" \
-    "" \
-    "reset v_long_double to 0"
-
-gdb_test "print v_long_double" \
-    " = 0" \
-    "print v_long_double - 3"
-
-gdb_test "set variable v_long_double = v_double" \
-    "" \
-    " set variable v_long_double with v_long_double"
-
-gdb_test "print v_long_double" \
-    " = 98765.43210000000544823706150054932" \
-    "print v_long_double - 4 "
diff --git a/gdb/testsuite/gdb.hp/gdb.defects/solib-d.c b/gdb/testsuite/gdb.hp/gdb.defects/solib-d.c
deleted file mode 100644
index ec803fe..0000000
--- a/gdb/testsuite/gdb.hp/gdb.defects/solib-d.c
+++ /dev/null
@@ -1,6 +0,0 @@
-main()
-{
-	function_from_primary();
-	function_from_secondary();
-}
-
diff --git a/gdb/testsuite/gdb.hp/gdb.defects/solib-d.exp b/gdb/testsuite/gdb.hp/gdb.defects/solib-d.exp
deleted file mode 100644
index f08b475..0000000
--- a/gdb/testsuite/gdb.hp/gdb.defects/solib-d.exp
+++ /dev/null
@@ -1,271 +0,0 @@
-#   Copyright (C) 1997-2015 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
-
-# This file was written by srikanth (with huge chunks borrowed from old ones) 
-#
-# Regression test for 
-#
-#     CLLbs14756
-#
-#         o catch load command does not stop for implicit loads.
-#
-#     CLLbs15382  
-#
-#         o sharedlibrary command ignores its argument and ends
-#           up loading every shared library there is ...
-#
-#     CLLbs15582  
-#
-#         o info line non-existent-function dumps core
-#         o clear non-existent function dumps core
-#         o xbreak non-existent-function dumps core
-#
-#     CLLbs15725
-#
-#         o gdb prints static and extern variables in shlibs incorrectly.
-#
-#     CLLbs16090
-#
-#         o deferred breakpoints should kick in for shlibs loaded explicitly
-#           with the sharedlibrary command.
-#         o GDB confuses export stubs with actual function.
-#
-#
-
-if { [skip_hp_tests] } { continue }
-
-
-# are we on a target board
-if ![isnative] {
-    return
-}
-
-# This test is presently only valid on HP-UX, since it requires
-# that we use HP-UX-specific compiler & linker options to build
-# the testcase.
-#
-setup_xfail "*-*-*"
-clear_xfail "hppa*-*-*hpux*"
-
-set prototypes 0
-set testfile "solib-d"
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
-set testfile1 ${objdir}/${subdir}/${testfile}1.o
-set testfile2 ${objdir}/${subdir}/${testfile}2.o
-set libfile1 ${objdir}/${subdir}/${testfile}1.sl
-set libfile2 ${objdir}/${subdir}/${testfile}2.sl
-
-# Create and source the file that provides information about the compiler
-# used to compile the test case.
-if [get_compiler_info] {
-    return -1
-}
-
-# set up appropriate compile option to recognize long double
-if {$hp_aCC_compiler || $hp_cc_compiler} {
-    set picflag "+z"
-    set ansiflag "-Ae"
-} else {
-    set picflag "-fpic"
-    set ansiflag ""
-}
-
-
-# Build the shared libraries this test case needs.
-#
-#cd ${subdir}
-
-if { [gdb_compile "${srcdir}/${subdir}/${testfile}1.c" "${testfile1}" object "{debug additional_flags=${picflag}}"] != "" } {
-    perror "Couldn't compile ${testfile}1.c"
-    return -1
-}
-
-if { [gdb_compile "${srcdir}/${subdir}/${testfile}2.c" "${testfile2}" object "{debug additional_flags=${picflag}}"] != ""} {
-    perror "Couldn't compile ${testfile}2.c"
-    return -1
-}
-
-remote_exec build "ld -b ${testfile1} -o ${libfile1}"
-remote_exec build "ld -b ${testfile2} -o ${libfile2}"
-
-# Build the test case
-
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile} ${libfile1} ${libfile2}" "${binfile}" executable "{debug additional_flags=${ansiflag} -Wl,-aarchive}"] != "" } {
-    perror "Couldn't build ${binfile}"
-    return -1
-}
-
-# Start with a fresh gdb
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-# Verify that we can set a generic catchpoint on shlib loads.  I.e., that
-# we can catch any shlib load, without specifying the name.
-#
-gdb_test "catch load" "Catchpoint \[0-9\]* .load <any library>.*" \
-    "set generic catch load"
-
-# Verify that implicit shlib loads are caught and reported.
-send_gdb "run\n"
-gdb_expect {
-    -re ".*solib-d1.*$gdb_prompt $" {
-        pass "Catch implicit load at startup"
-    }
-    -re "Inferior \[0-9\]+ exited.*$gdb_prompt $" {
-        fail "CLLbs14756 || CLLbs16090 came back ???"
-    }
-    timeout { fail "(timeout) implicit library load" }
-}
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-if ![runto_main] { fail "breakpoint at main did not trigger ?" }
-
-# verify that we print globals from shlibs correctly.
-gdb_test "p global_from_primary" " = 5678" \
-    "print global from shlib (CLLbs15725)"
-
-gdb_test "p global_from_secondary" " = 9012" \
-    "print global from shlib (CLLbs15725)"
-
-# verify that we print static variables from shlibs correctly.
-if { ![runto function_from_primary] } { return }
-gdb_test "p file_static" " = 1234" "print file static variable (CLLbs15725)" 
-
-if { ![runto function_from_secondary] } { return }
-gdb_test "p local_static" " = 3456" "print local static variable (CLLbs15725)" 
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-gdb_test "set auto-solib-add 0" "" "turn off auto shlib debug loading"
-
-if ![runto_main] {
-    perror "C function calling tests suppressed"
-}
-
-# verify that "clear non-existent-symbol" does not crash
-gdb_test "clear junkfunc" "Location not found.*" \
-    "clear non-existent function does not dump core !"
-
-# verify that "info line non-existent-symbol" does not crash
-gdb_test "info line junkfunc" "Location not found.*" \
-    "info line junkfunc does not dump core !"
-
-# verify that "xbreak non-existent-symbol" does not crash
-gdb_test "xbreak junkfunc" "Function \"junkfunc\" not defined.*" \
-    "xbreak junkfunc does not dump core !"
-
-gdb_test "list function_from_primary" \
-    "No line number known for function_from_primary.*" \
-    "turning off auto shlib debug loading"
-
-send_gdb "sharedlibrary solib-d1\n" 
-gdb_expect {
-    -re "Reading symbols from.*solib-d1.*$gdb_prompt $" {
-	pass "loading primary library on demand (1)"
-    }
-    -re "--Adding symbols for shared library.*solib-d1.*$gdb_prompt $" {
-	pass "loading primary library on demand (2)"
-    }
-    -re "$gdb_prompt $" { fail "loading primary library on demand (3)" }
-    timeout { fail "(timeout) loading primary library on demand" }
-}
-
-# make sure that load above of primary also did not pull in secondary.
-send_gdb "list function_from_secondary\n" 
-gdb_expect {
-    -re "No symbol.*context.*$gdb_prompt $" {
-        pass "loaded only what we needed (1)"
-    }
-    -re "No line number known for function_from_secondary.*$gdb_prompt $" {
-        pass "loaded only what we needed (2)"
-    }
-    -re ".*9012.*$gdb_prompt $" { fail "Oops ! CLLbs15382 came back ?" }
-    timeout { fail "(timeout) printing global" }
-}
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-gdb_test "set auto-solib-add 0" "" "turn off auto shlib debug loading"
-
-gdb_test "set stop-on-solib-event 1" "" "stop-on-solib-event"
-
-# verify that we set breakpoint on the function and not the export stub
-# used to be that we set bp on the export stub of _start and thus miss
-# shlib loads in some cases (where the stub exists)
-send_gdb "run\n"
-gdb_expect {
-    -re "Stopped due to shared library event.*$gdb_prompt $" {
-        pass "stop for shlib event"
-    }
-    -re "Inferior \[0-9\]+ exited.*$gdb_prompt $" {
-        fail "Bug CLLbs16090 came back ?"
-    }
-    timeout { fail "(timeout) stop for shlib event " }
-}
-
-gdb_test "b main" "Breakpoint 1 at.*" "set breakpoint on main"
-
-gdb_test "set stop-on-solib-event 0" "" "stop-on-solib-event (timeout)"
-
-# verify that we set breakpoint on the function and not the export stub
-gdb_test "cont" "Breakpoint 1.*main.*" "run to main"
-
-# On PA64 we read in the unwind info and linker symbol table which lets
-# us set the breakpoint and not defer it.
-send_gdb "b garbage\n"
-gdb_expect {
-    -re "Breakpoint.*deferred.*garbage.*library containing.*is loaded.*$gdb_prompt $" {
-        pass " set deferred breakpoint (1)"
-    }
-    -re "Breakpoint 2 at 0x.*$gdb_prompt $" {
-        pass " set deferred breakpoint (2)"
-    }
-    -re "$gdb_prompt $" { fail " set deferred breakpoint (3)" }
-    timeout { fail "(timeout) set deferred breakpoint" }
-}
-
-# make sure that the sharedlibrary command enables any deferred breakpoints
-# that it should.
-send_gdb "sharedlibrary lib\n"
-gdb_expect {
-    -re "Reading.*solib-d1.*$gdb_prompt $" {
-        pass "load up all shared libs (1)"
-    }
-    -re "Loading.*dld.sl.*--Adding symbols.*solib-d1.*$gdb_prompt $" {
-        pass "load up all shared libs (2)"
-    }
-    -re "$gdb_prompt $" { fail "load up all libraries" }
-    timeout { fail "(timeout) load all libraries " }
-}
-
-# do we stop at garbage ? If yes ok. 
-gdb_test "cont" "Breakpoint.*garbage.*" "deferred breakpoint enabled"
-
-gdb_exit
-return 0
diff --git a/gdb/testsuite/gdb.hp/gdb.defects/solib-d1.c b/gdb/testsuite/gdb.hp/gdb.defects/solib-d1.c
deleted file mode 100644
index b6da64d..0000000
--- a/gdb/testsuite/gdb.hp/gdb.defects/solib-d1.c
+++ /dev/null
@@ -1,12 +0,0 @@
-static int file_static = 1234;
-int global_from_primary = 5678;
-
-int function_from_primary()
-{
-    garbage();	
-}
-
-force_generation_of_export_stub()
-{
-    _start();   /* force main module to have an export stub for _start() */
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.defects/solib-d2.c b/gdb/testsuite/gdb.hp/gdb.defects/solib-d2.c
deleted file mode 100644
index 024616b..0000000
--- a/gdb/testsuite/gdb.hp/gdb.defects/solib-d2.c
+++ /dev/null
@@ -1,11 +0,0 @@
-int global_from_secondary = 9012;
-int function_from_secondary()
-{
-    static int local_static = 3456;
-    return 0;
-}
-
-garbage()
-{
-	return 0;
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/Makefile.in b/gdb/testsuite/gdb.hp/gdb.objdbg/Makefile.in
deleted file mode 100644
index 2440cf4..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/Makefile.in
+++ /dev/null
@@ -1,26 +0,0 @@
-VPATH = @srcdir@
-srcdir = @srcdir@
-
-EXECUTABLES = objdbg01/test0 objdbg01/test1 objdbg02/test \
-	objdbg03/test objdbg04/test0 objdbg04/test1
-
-all:
-	@echo "Nothing to be done for all..."
-
-info:
-install-info:
-dvi:
-install:
-uninstall: force
-installcheck:
-check:
-
-clean mostlyclean:
-	-rm -f *~ objdbg*/*.o objdbg*/*.ci
-	-rm -f *.dwo *.dwp
-	-rm -f core $(EXECUTABLES)
-
-distclean maintainer-clean realclean: clean
-	-rm -f Makefile config.status config.log
-	-rm -f *-init.exp
-	-rm -fr *.log summary detail *.plog *.sum *.psum site.*
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01.exp b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01.exp
deleted file mode 100644
index 02ec5d3..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01.exp
+++ /dev/null
@@ -1,223 +0,0 @@
-# Test reading debug information from in object files.
-
-if { [skip_hp_tests] } { continue }
-
-if { ![istarget "hppa*-*-hpux*"] } {
-    verbose "HPUX test ignored for non-hppa targets."
-    return 0
-}
-
-set testfile "test"
-set srcsubdir ${srcdir}/${subdir}/objdbg01
-set toolssubdir ${srcdir}/${subdir}/tools
-set objdbgdir ${objdir}/${subdir}/objdbg01
-set binfile ${objdbgdir}/${testfile}
-set symaddrfile ${toolssubdir}/symaddr
-
-# Create and source the file that provides information about the compiler
-# used to compile the test case.
-if [get_compiler_info] {
-    return -1
-}
-
-if {!$hp_aCC_compiler && !$hp_cc_compiler} {
-  return 0
-}
-
-if { [gdb_compile "${toolssubdir}/test-objdbg.cc" "${objdbgdir}/test-objdbg.o" object "debug c++ {additional_flags=-I${toolssubdir} +objdebug}"] != "" } {
-    untested objdbg01.exp
-    return -1
-}
-
-if { [gdb_compile "${srcsubdir}/x1.cc" "${objdbgdir}/x1.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } {
-    perror "Couldn't compile x1.cc"
-    return -1
-}
-
-if { [gdb_compile "${srcsubdir}/x2.cc" "${objdbgdir}/x2.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } {
-    perror "Couldn't compile x2.cc"
-    return -1
-}
-
-if { [gdb_compile "${srcsubdir}/x3.cc" "${objdbgdir}/x3.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } {
-    perror "Couldn't compile x3.cc"
-    return -1
-}
-
-if { [gdb_compile "${objdbgdir}/x1.o ${objdbgdir}/x2.o ${objdbgdir}/x3.o" "${binfile}0" executable "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } {
-    perror "Couldn't compile ${binfile}0"
-    return -1
-}
-
-if {[gdb_compile "${objdbgdir}/x3.o ${objdbgdir}/x2.o ${objdbgdir}/x1.o" "${binfile}1" executable "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } {
-    perror "Couldn't compile ${binfile}1"
-    return -1
-}
-
-# Test two executables. The first has x1.cc linked first, the second
-# has x3.cc linked first.  The difference is that in the first one,
-# the Info<PP> instantiation from x1.cc is taken, in the second, its
-# from x3.cc.
-
-for {set filenum 0} {$filenum < 2} {incr filenum 1} {
-
-    # Lets test some commons
-    # Need to restart each to make sure objects are not loaded
-    # Also cross check the address with what is actually in the
-    #   object file (call the executable ${symaddrfile} to retrieve the
-    #   information).
-
-    set exec_output [lindex [remote_exec build "${symaddrfile} ${binfile}${filenum} acomm"] 1]
-    regsub -all "\[\r\n\]" ${exec_output} "" exec_output
-
-    gdb_exit
-    gdb_start
-    gdb_reinitialize_dir ${srcsubdir}
-    gdb_load ${binfile}${filenum}
-    gdb_test "p &acomm" "..* = \\(int \[*\]\\) 0x${exec_output}.*"
-
-    gdb_exit
-    gdb_start
-    gdb_reinitialize_dir ${srcsubdir}
-    gdb_load ${binfile}${filenum}
-    gdb_test "b main" "Breakpoint \[0-9\]+ at 0x\[0-9a-f\]+: file ..*/x1.cc, line 20."
-    gdb_test "run" "Starting program:.*Breakpoint \[0-9\]+, main .*/x1.cc:20.*20.*acomm.*=.*1.*"
-    gdb_test "s 1" "21.*"
-    gdb_test "p acomm" ".* = 1.*"
-    gdb_test "p &acomm" "..* = \\(int \[*\]\\) 0x${exec_output}.*"
-
-    # Step through each line.
-    # Do this three times.
-    #   First round:  Test that things are okay after printing commons
-    #                 above.
-    #   Second round: Restart gdb and make sure we can walk through
-    #   Third round:  Do NOT restrart gdb to verify that the debug information
-    #                 was not messed up by loading additional object files from
-    #                 the first run through.
-    for {set i 0} {$i < 3} {incr i 1} {
-        if $i==1 then {
-            gdb_exit
-            gdb_start
-            gdb_reinitialize_dir ${srcsubdir}
-            gdb_load ${binfile}${filenum}
-        }
-        if $i!=2 then {
-            gdb_test "b main" \
-		"Breakpoint \[0-9\]+ at 0x\[0-9a-f\]+: file ..*/x1.cc, line 20."
-        }
-        if $i!=0 then {
-            gdb_test "run" \
-		"Starting program:.*Breakpoint \[0-9\]+, main .*/x1.cc:20.*"
-            gdb_test "s 1" "21.*"
-        }
-        gdb_test "s 1" "Info<PP>::p .*/x3.h:11.*"
-        gdb_test "s 1" "PP::print .*/x2.cc:8.*"
-        gdb_test "s 1" ".*9.*"
-        gdb_test "s 1" "Info<PP>::p .*/x3.h:12.*"
-        gdb_test "s 1" "main .*/x1.cc:22.*"
-        gdb_test "s 1" "foo .*/x3.cc:5.*"
-        gdb_test "s 1" "Info<PP>::p .*/x3.h:11.*"
-        gdb_test "s 1" "PP::print .*/x2.cc:8.*"
-        gdb_test "s 1" ".*9.*"
-        gdb_test "s 1" "Info<PP>::p .*/x3.h:12.*"
-        gdb_test "s 1" "foo .*/x3.cc:6.*"
-        gdb_test "s 1" "Info<QQ>::p .*/x3.h:11.*"
-        gdb_test "s 1" "QQ::print .*/x2.cc:13.*"
-        gdb_test "s 1" ".*14.*"
-        gdb_test "s 1" "Info<QQ>::p .*/x3.h:12.*"
-        gdb_test "s 1" "foo .*/x3.cc:7.*"
-        gdb_test "s 1" "main .*/x1.cc:24.*"
-        gdb_test "s 1" ".*25.*"
-        if [istarget "hppa64-*-*"] {
-            gdb_test "s 1" "0x\[0-9a-f\]+ in .*"
-	    gdb_continue_to_end
-        } else {
-            gdb_test "s 1" "0x\[0-9a-f\]+ in _start .*"
-            gdb_continue_to_end "" "s 1"
-        }
-    }
-
-    # Test various ptypes, and combinations of them
-    # Test things multiple times in each set to make sure that the debug
-    #   information did not get messed up.
-
-    gdb_exit
-    gdb_start
-    gdb_reinitialize_dir ${srcsubdir}
-    gdb_load ${binfile}${filenum}
-    gdb_test "ptype QQ" "type = (class |)QQ {..*void print( |)..*}.*"
-    gdb_test "ptype PP" "type = (class |)PP {..*void print( |)..*}.*"
-    gdb_test "ptype QQ" "type = (class |)QQ {..*void print( |)..*}.*"
-
-    gdb_exit
-    gdb_start
-    gdb_reinitialize_dir ${srcsubdir}
-    gdb_load ${binfile}${filenum}
-    gdb_test "ptype PP" "type = (class |)PP {..*void print( |)..*}.*"
-    gdb_test "ptype QQ" "type = (class |)QQ {..*void print( |)..*}.*"
-    gdb_test "ptype PP" "type = (class |)PP {..*void print( |)..*}.*"
-
-    gdb_exit
-    gdb_start
-    gdb_reinitialize_dir ${srcsubdir}
-    gdb_load ${binfile}${filenum}
-    gdb_test "ptype Info<QQ>" "type = (class |)Info<QQ> {..*void p( |)..*}.*"
-    gdb_test "ptype Info<PP>" "type = (class |)Info<PP> {..*void p( |)..*}.*"
-    gdb_test "ptype Info<QQ>" "type = (class |)Info<QQ> {..*void p( |)..*}.*"
-
-    gdb_exit
-    gdb_start
-    gdb_reinitialize_dir ${srcsubdir}
-    gdb_load ${binfile}${filenum}
-    gdb_test "ptype Info<PP>" "type = (class |)Info<PP> {..*void p( |)..*}.*"
-    gdb_test "ptype Info<QQ>" "type = (class |)Info<QQ> {..*void p( |)..*}.*"
-    gdb_test "ptype Info<PP>" "type = (class |)Info<PP> {..*void p( |)..*}.*"
-
-    gdb_exit
-    gdb_start
-    gdb_reinitialize_dir ${srcsubdir}
-    gdb_load ${binfile}${filenum}
-    gdb_test "ptype Info" "type = template <..*> (class |)Info {..*}.*"
-    gdb_test "ptype Info<PP>" "type = (class |)Info<PP> {..*void p( |)..*}.*"
-    gdb_test "ptype Info<QQ>" "type = (class |)Info<QQ> {..*void p( |)..*}.*"
-    gdb_test "ptype Info" "type = template <..*> (class |)Info {..*}.*"
-
-    gdb_exit
-    gdb_start
-    gdb_reinitialize_dir ${srcsubdir}
-    gdb_load ${binfile}${filenum}
-    gdb_test "ptype class QQ" "type = (class |)QQ {..*void print( |)..*}.*"
-    gdb_test "ptype class PP" "type = (class |)PP {..*void print( |)..*}.*"
-    gdb_test "ptype class QQ" "type = (class |)QQ {..*void print( |)..*}.*"
-
-    gdb_exit
-    gdb_start
-    gdb_reinitialize_dir ${srcsubdir}
-    gdb_load ${binfile}${filenum}
-    gdb_test "ptype class PP" "type = (class |)PP {..*void print( |)..*}.*"
-    gdb_test "ptype class QQ" "type = (class |)QQ {..*void print( |)..*}.*"
-    gdb_test "ptype class PP" "type = (class |)PP {..*void print( |)..*}.*"
-
-    gdb_exit
-    gdb_start
-    gdb_reinitialize_dir ${srcsubdir}
-    gdb_load ${binfile}${filenum}
-    gdb_test "ptype class Info<QQ>" \
-	"type = (class |)Info<QQ> {..*void p( |)..*}.*"
-    gdb_test "ptype class Info<PP>" \
-	"type = (class |)Info<PP> {..*void p( |)..*}.*"
-    gdb_test "ptype class Info<QQ>" \
-	"type = (class |)Info<QQ> {..*void p( |)..*}.*"
-
-    gdb_exit
-    gdb_start
-    gdb_reinitialize_dir ${srcsubdir}
-    gdb_load ${binfile}${filenum}
-    gdb_test "ptype class Info<PP>" \
-	"type = (class |)Info<PP> {..*void p( |)..*}.*"
-    gdb_test "ptype class Info<QQ>" \
-	"type = (class |)Info<QQ> {..*void p( |)..*}.*"
-    gdb_test "ptype class Info<PP>" \
-	"type = (class |)Info<PP> {..*void p( |)..*}.*"
-}
-
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x1.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x1.cc
deleted file mode 100644
index 0de3153..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x1.cc
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <stdio.h>
-#include "x3.h"
-
-extern void foo();
-
-extern int acomm;
-
-int main3()
-{
-  return 1;
-}
-
-int main2()
-{
-  return 0;
-}
-
-int main()
-{
-  acomm = 1;
-  (new Info<PP>)->p(new PP);
-  foo();
-
-  return 0;
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x2.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x2.cc
deleted file mode 100644
index af588fb..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x2.cc
+++ /dev/null
@@ -1,14 +0,0 @@
-#include "x3.h"
-#include <stdio.h>
-
-int acomm;
-
-void PP::print()
-{
-  printf("In PP::print()\n");
-}
-
-void QQ::print()
-{
-  printf("In QQ::print()\n");
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x3.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x3.cc
deleted file mode 100644
index 88fe545..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x3.cc
+++ /dev/null
@@ -1,7 +0,0 @@
-#include "x3.h"
-
-void foo()
-{
-  (new Info<PP>)->p(new PP);
-  (new Info<QQ>)->p(new QQ);
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x3.h b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x3.h
deleted file mode 100644
index d03a550..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x3.h
+++ /dev/null
@@ -1,22 +0,0 @@
-
-template <class T>
-class Info {
-public:
-  void p(T *x);
-};
-
-template <class T>
-void Info<T>::p(T *x)
-{
-  x->print();
-}
-
-class PP {
-public:
-  void print();
-};
-
-class QQ {
-public:
-  void print();
-};
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02.exp b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02.exp
deleted file mode 100644
index 5677b7e..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02.exp
+++ /dev/null
@@ -1,86 +0,0 @@
-# Test reading debug information from in object files.
-
-if { [skip_hp_tests] } { continue }
-
-if { ![istarget "hppa*-*-hpux*"] } {
-    verbose "HPUX test ignored for non-hppa targets."
-    return 0
-}
-
-set testfile "test"
-set srcsubdir ${srcdir}/${subdir}/objdbg02
-set objdbgdir ${objdir}/${subdir}/objdbg02
-set binfile ${objdbgdir}/${testfile}
-set toolssubdir ${srcdir}/${subdir}/tools
-
-# Create and source the file that provides information about the compiler
-# used to compile the test case.
-if [get_compiler_info] {
-    return -1
-}
-
-if {!$hp_aCC_compiler && !$hp_cc_compiler} {
-  return 0
-}
-
-if { [gdb_compile "${toolssubdir}/test-objdbg.cc" "${objdbgdir}/test-objdbg.o" object "debug c++ {additional_flags=-I${toolssubdir} +objdebug}"] != "" } {
-    untested objdbg02.exp
-    return -1
-}
-
-if { [gdb_compile "${srcsubdir}/x1.cc" "${objdbgdir}/x1.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } {
-    perror "Couldn't compile x1.cc"
-    return -1
-}
-
-if { [gdb_compile "${srcsubdir}/x2.cc" "${objdbgdir}/x2.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } {
-    perror "Couldn't compile x2.cc"
-    return -1
-}
-
-if { [gdb_compile "${srcsubdir}/x3.cc" "${objdbgdir}/x3.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } {
-    perror "Couldn't compile x3.cc"
-    return -1
-}
-
-remote_exec build "rm -f ${objdbgdir}/test.a"
-set status [remote_exec build "ar cr ${objdbgdir}/test.a ${objdbgdir}/x2.o ${objdbgdir}/x3.o"]
-if { [lindex $status 0] != 0 } {
-    perror "Couldn't compile test.a"
-    return -1
-}
-remote_exec build "rm -f ${objdbgdir}/x2.o ${objdbgdir}/x3.o"
-
-if { [gdb_compile "${objdbgdir}/x1.o ${objdbgdir}/test.a" "$binfile" executable "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } {
-    perror "Couldn't compile ${binfile}"
-    return -1
-}
-
-# Test loading debug information from an archive file
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir ${srcsubdir}
-gdb_load ${binfile}
-
-gdb_test "b main" "Breakpoint \[0-9\]+ at 0x\[0-9a-f\]+: file ..*/x1.cc, line 12."
-gdb_test "run" "Starting program:.*Breakpoint \[0-9\]+, main .*/x1.cc:12.*"
-gdb_test "s 1" ".*13.*"
-gdb_test "s 1" "foo1 .*/x2.cc:15.*"
-gdb_test "s 1" ".*16.*"
-gdb_test "s 1" "foo2 .*/x2.cc:10.*"
-gdb_test "s 1" ".*11.*"
-gdb_test "s 1" "foo1 .*/x2.cc:17.*"
-gdb_test "s 1" "main .*/x1.cc:14.*"
-gdb_test "s 1" "foo3 .*/x3.cc:5.*"
-gdb_test "s 1" ".*6.*"
-gdb_test "s 1" "main .*/x1.cc:15.*"
-gdb_test "s 1" ".*16.*"
-if [istarget "hppa64-*-*"] {
-    gdb_test "s 1" "0x\[0-9a-f\]+ in .*START.*"
-    gdb_continue_to_end
-} else {
-    gdb_test "s 1" "0x\[0-9a-f\]+ in _start .*"
-    gdb_continue_to_end "" "s 1"
-}
-
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x1.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x1.cc
deleted file mode 100644
index 7ec0cf1..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x1.cc
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <stdio.h>
-
-extern void foo1();
-extern void foo3();
-
-struct foo_type;
-
-int main()
-{
-  struct foo_type *x;
-
-  printf("In main.\n");
-  foo1();
-  foo3();
-  return 0;
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x2.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x2.cc
deleted file mode 100644
index 627f02d..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x2.cc
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <stdio.h>
-
-struct foo_type {
-  int t1;
-  int t2;
-};
-
-static void foo2()
-{
-  printf("In foo2.\n");
-}
-
-void foo1()
-{
-  printf("In foo1.\n");
-  foo2();
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x3.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x3.cc
deleted file mode 100644
index d03ea51..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x3.cc
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <stdio.h>
-
-void foo3()
-{
-  printf("In foo3.\n");
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03.exp b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03.exp
deleted file mode 100644
index 73defdc..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03.exp
+++ /dev/null
@@ -1,165 +0,0 @@
-# Test reading debug information from in object files.
-
-if { [skip_hp_tests] } { continue }
-
-if { ![istarget "hppa*-*-hpux*"] } {
-    verbose "HPUX test ignored for non-hppa targets."
-    return 0
-}
-
-set testfile "test"
-set srcsubdir ${srcdir}/${subdir}/objdbg03
-set objdbgdir ${objdir}/${subdir}/objdbg03
-set binfile ${objdbgdir}/${testfile}
-set toolssubdir ${srcdir}/${subdir}/tools
-if [istarget "hppa64-*-*"] {
-  set symaddrfile ${toolssubdir}/symaddr.pa64
-} else {
-  set symaddrfile ${toolssubdir}/symaddr
-}
-
-# Create and source the file that provides information about the compiler
-# used to compile the test case.
-if [get_compiler_info] {
-    return -1
-}
-
-if {!$hp_aCC_compiler && !$hp_cc_compiler} {
-  return 0
-}
-
-if { [gdb_compile "${toolssubdir}/test-objdbg.cc" "${objdbgdir}/test-objdbg.o" object "debug c++ {additional_flags=-I${toolssubdir} +objdebug}"] != "" } {
-    untested objdbg03.exp
-    return -1
-}
-
-if { [gdb_compile "${srcsubdir}/x1.cc" "${objdbgdir}/x1.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } {
-    perror "Couldn't compile x1.cc"
-    return -1
-}
-
-if { [gdb_compile "${srcsubdir}/x2.cc" "${objdbgdir}/x2.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } {
-    perror "Couldn't compile x2.cc"
-    return -1
-}
-
-if { [gdb_compile "${srcsubdir}/x3.cc" "${objdbgdir}/x3.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } {
-    perror "Couldn't compile x3.cc"
-    return -1
-}
-
-if { [gdb_compile "${objdbgdir}/x1.o ${objdbgdir}/x2.o ${objdbgdir}/x3.o" "${binfile}" executable "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } {
-    perror "Couldn't compile ${binfile}"
-    return -1
-}
-
-#
-# Test some normal commons
-#
-
-# Print the types
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir ${srcsubdir}
-gdb_load ${binfile}
-
-gdb_test "ptype common1" "type = int"
-gdb_test "ptype common2" "type = int"
-gdb_test "ptype common3" "type = int"
-gdb_test "ptype data1" "type = int"
-gdb_test "ptype data2" "type = int"
-gdb_test "ptype data3" "type = int"
-gdb_test "ptype common11" "type = int"
-gdb_test "ptype common10" "type = int"
-gdb_test "ptype data10" "type = int"
-gdb_test "ptype data11" "type = int"
-
-# Print the values
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir ${srcsubdir}
-gdb_load ${binfile}
-
-gdb_test "b main" "Breakpoint \[0-9\]+ at 0x\[0-9a-f\]+: file ..*/x1.cc, line 11."
-gdb_test "run" "Starting program:.*Breakpoint \[0-9\]+, main .*/x1.cc:11.*"
-gdb_test "p data1" "..* = 1"
-gdb_test "p data2" "..* = 2"
-gdb_test "p data3" "..* = 3"
-gdb_test "p data10" "..* = 10"
-gdb_test "p data11" "..* = 11"
-gdb_test "n" ".*12.*"
-gdb_test "p common11" "..* = 11"
-
-gdb_test "s 1" "foo .*/x3.cc:15.*"
-gdb_test "s 4" ".*20.*"
-gdb_test "p data4" "..* = 4"
-gdb_test "p common4" "..* = 4"
-gdb_test "n" ".*21.*"
-
-gdb_test "n" "main .*/x1.cc:14.*"
-gdb_test "p common1" "..* = 1"
-gdb_test "p common2" "..* = 2"
-gdb_test "p common3" "..* = 3"
-
-# Verify that addresses match those in the executable
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir ${srcsubdir}
-gdb_load ${binfile}
-
-set exec_output_data1 [lindex [remote_exec build "${symaddrfile} ${binfile} data1"] 1]
-regsub -all "\[\r\n\]" ${exec_output_data1} "" exec_output_data1
-
-set exec_output_data2 [lindex [remote_exec build "${symaddrfile} ${binfile} data2"] 1]
-regsub -all "\[\r\n\]" ${exec_output_data2} "" exec_output_data2
-
-set exec_output_data3 [lindex [remote_exec build "${symaddrfile} ${binfile} data3"] 1]
-regsub -all "\[\r\n\]" ${exec_output_data3} "" exec_output_data3
-
-set exec_output_data10 [lindex [remote_exec build "${symaddrfile} ${binfile} data10"] 1]
-regsub -all "\[\r\n\]" ${exec_output_data10} "" exec_output_data10
-
-set exec_output_data11 [lindex [remote_exec build "${symaddrfile} ${binfile} data11"] 1]
-regsub -all "\[\r\n\]" ${exec_output_data11} "" exec_output_data11
-
-set exec_output_common1 [lindex [remote_exec build "${symaddrfile} ${binfile} common1"] 1]
-regsub -all "\[\r\n\]" ${exec_output_common1} "" exec_output_common1
-
-set exec_output_common2 [lindex [remote_exec build "${symaddrfile} ${binfile} common2"] 1]
-regsub -all "\[\r\n\]" ${exec_output_common2} "" exec_output_common2
-
-set exec_output_common3 [lindex [remote_exec build "${symaddrfile} ${binfile} common3"] 1]
-regsub -all "\[\r\n\]" ${exec_output_common3} "" exec_output_common3
-
-set exec_output_common10 [lindex [remote_exec build "${symaddrfile} ${binfile} common10"] 1]
-regsub -all "\[\r\n\]" ${exec_output_common10} "" exec_output_common10
-
-set exec_output_common11 [lindex [remote_exec build "${symaddrfile} ${binfile} common11"] 1]
-regsub -all "\[\r\n\]" ${exec_output_common11} "" exec_output_common11
-
-if [istarget "hppa64-*-*"] {
-    gdb_test "p &data1" "..* = \\(int \[*\]\\) ${exec_output_data1}"
-    gdb_test "p &data2" "..* = \\(int \[*\]\\) ${exec_output_data2}"
-    gdb_test "p &data3" "..* = \\(int \[*\]\\) ${exec_output_data3}"
-    gdb_test "p &data10" "..* = \\(int \[*\]\\) ${exec_output_data10}"
-    gdb_test "p &data11" "..* = \\(int \[*\]\\) ${exec_output_data11}"
-    gdb_test "p &common1" "..* = \\(int \[*\]\\) ${exec_output_common1}"
-    gdb_test "p &common2" "..* = \\(int \[*\]\\) ${exec_output_common2}"
-    gdb_test "p &common3" "..* = \\(int \[*\]\\) ${exec_output_common3}"
-    gdb_test "p &common10" "..* = \\(int \[*\]\\) ${exec_output_common10}"
-    gdb_test "p &common11" "..* = \\(int \[*\]\\) ${exec_output_common11}"
-} else {
-    gdb_test "p &data1" "..* = \\(int \[*\]\\) 0x${exec_output_data1}"
-    gdb_test "p &data2" "..* = \\(int \[*\]\\) 0x${exec_output_data2}"
-    gdb_test "p &data3" "..* = \\(int \[*\]\\) 0x${exec_output_data3}"
-    gdb_test "p &data10" "..* = \\(int \[*\]\\) 0x${exec_output_data10}"
-    gdb_test "p &data11" "..* = \\(int \[*\]\\) 0x${exec_output_data11}"
-    gdb_test "p &common1" "..* = \\(int \[*\]\\) 0x${exec_output_common1}"
-    gdb_test "p &common2" "..* = \\(int \[*\]\\) 0x${exec_output_common2}"
-    gdb_test "p &common3" "..* = \\(int \[*\]\\) 0x${exec_output_common3}"
-    gdb_test "p &common10" "..* = \\(int \[*\]\\) 0x${exec_output_common10}"
-    gdb_test "p &common11" "..* = \\(int \[*\]\\) 0x${exec_output_common11}"
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x1.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x1.cc
deleted file mode 100644
index 84231b0..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x1.cc
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <stdio.h>
-
-extern int foo();
-extern int common3;
-extern int data3;
-extern int common11;
-extern int data11;
-
-int main()
-{
-  common11 = 11;
-  printf("In main: %d %d %d\n", data3, common3, foo(), common11, data11);
-
-  return 0;
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x2.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x2.cc
deleted file mode 100644
index 165cb85..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x2.cc
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdio.h>
-
-int common10;
-int common11;
-
-int data10 = 10;
-int data11 = 11;
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x3.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x3.cc
deleted file mode 100644
index 80d38c7..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x3.cc
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <stdio.h>
-
-int common1;
-int common2;
-int common3;
-static int common4;
-
-int data1 = 1;
-int data2 = 2;
-int data3 = 3;
-static int data4 = 4;
-
-int foo()
-{
-  common1 = 1;
-  common2 = 2;
-  common3 = 3;
-  common4 = 4;
-
-  return data1 + data2 + data3 + data4 + common1 + common2 + common3 + common4;
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04.exp b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04.exp
deleted file mode 100644
index 0a98950..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04.exp
+++ /dev/null
@@ -1,66 +0,0 @@
-# Test reading debug information from in object files.
-
-if { [skip_hp_tests] } { continue }
-
-if { ![istarget "hppa*-*-hpux*"] } {
-    verbose "HPUX test ignored for non-hppa targets."
-    return 0
-}
-
-set testfile "test"
-set srcsubdir ${srcdir}/${subdir}/objdbg04
-set objdbgdir ${objdir}/${subdir}/objdbg04
-set binfile ${objdbgdir}/${testfile}
-set toolssubdir ${srcdir}/${subdir}/tools
-set symaddrfile ${toolssubdir}/symaddr
-
-# Create and source the file that provides information about the compiler
-# used to compile the test case.
-if [get_compiler_info] {
-    return -1
-}
-
-if {!$hp_aCC_compiler && !$hp_cc_compiler} {
-  return 0
-}
-
-if { [gdb_compile "${toolssubdir}/test-objdbg.cc" "${objdbgdir}/test-objdbg.o" object "debug c++ {additional_flags=-I${toolssubdir} +objdebug}"] != "" } {
-    untested objdbg04.exp
-    return -1
-}
-
-if { [gdb_compile "${srcsubdir}/x1.cc" "${objdbgdir}/x1.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } {
-    perror "Couldn't compile x1.cc"
-    return -1
-}
-
-if { [gdb_compile "${srcsubdir}/x2.cc" "${objdbgdir}/x2.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } {
-    perror "Couldn't compile x2.cc"
-    return -1
-}
-
-if { [gdb_compile "${objdbgdir}/x1.o ${objdbgdir}/x2.o" "${binfile}0" executable "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } {
-    perror "Couldn't compile x1.cc"
-    return -1
-}
-
-if { [gdb_compile "${objdbgdir}/x2.o ${objdbgdir}/x1.o" "${binfile}1" executable "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } {
-    perror "Couldn't compile x1.cc"
-    return -1
-}
-
-# Test two executables. The first has x1.cc linked first, the second
-# has x2.cc linked first.  The difference is which COMDAT section was
-# picked.
-
-for {set filenum 0} {$filenum < 2} {incr filenum 1} {
-  gdb_exit
-  gdb_start
-  gdb_reinitialize_dir ${srcsubdir}
-  gdb_load ${binfile}${filenum}
-
-  gdb_test "ptype Adder" "type = template <class T> (class |)Adder {..*T val.*;.*}(.*template instantiations:.*Adder<int>|)"
-  gdb_test "ptype Adder<int>" "type = (class |)Adder<int> {.*private:.*int val;.*public:.*void set( |)\\(int\\);.*int get( |)\\(void\\);.*int add( |)\\(int\\);.*}"
-  gdb_test "ptype Adder" "type = template <class T> (class |)Adder {..*T val.*;.*}(.*template instantiations:.*Adder<int>|)"
-
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x.h b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x.h
deleted file mode 100644
index 9df8ef9..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x.h
+++ /dev/null
@@ -1,30 +0,0 @@
-template <class T>
-class Adder {
-public:
-  void set(T);
-  T get();
-  T add(T);
-
-private:
-  T val;
-};
-
-template <class T>
-void Adder<T>::set(T new_val)
-{
-  val = new_val;
-}
-
-template <class T>
-T Adder<T>::get()
-{
-  return val;
-}
-
-template <class T>
-T Adder<T>::add(T new_val)
-{
-  val += new_val;
-  return val;
-}
-
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x1.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x1.cc
deleted file mode 100644
index 1f284b2..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x1.cc
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <stdio.h>
-#include "x.h"
-
-template class Adder<int>;
-
-int main()
-{
-  Adder<int> add;
-
-  add.set(3);
-  add.add(3);
-  printf("In main: %d\n", add.get());
-
-  return 0;
-}
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x2.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x2.cc
deleted file mode 100644
index 29eea75..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x2.cc
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "x.h"
-
-template class Adder<int>;
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/tools/symaddr b/gdb/testsuite/gdb.hp/gdb.objdbg/tools/symaddr
deleted file mode 100755
index d358e31..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/tools/symaddr
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-
-# Get the address of a symbol in Hex.
-# $1 = object/executable file name
-# $2 = symbol name
-${srcdir}/gdb.hp/tools/odump -sym "$1" | grep "$2"$ | awk '{print $1}'
-
-exit 0
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/tools/symaddr.pa64 b/gdb/testsuite/gdb.hp/gdb.objdbg/tools/symaddr.pa64
deleted file mode 100755
index 4f3c8db..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/tools/symaddr.pa64
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-
-# Get the address of a symbol in Hex.
-# $1 = object/executable file name
-# $2 = symbol name
-/usr/ccs/bin/elfdump -t +s .symtab "$1" | grep "$2"$ | awk '{print $6}'
-
-exit 0
diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/tools/test-objdbg.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/tools/test-objdbg.cc
deleted file mode 100644
index f8b643a..0000000
--- a/gdb/testsuite/gdb.hp/gdb.objdbg/tools/test-objdbg.cc
+++ /dev/null
@@ -1,4 +0,0 @@
-int main()
-{
-  return 0;
-}
diff --git a/gdb/testsuite/gdb.hp/tools/odump b/gdb/testsuite/gdb.hp/tools/odump
deleted file mode 100755
index c96abed..0000000
--- a/gdb/testsuite/gdb.hp/tools/odump
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/ksh
-
-# First source /app/appserver
-. /app/appserver
-
-# Exec the executable.
-exec $APPROOT/usr/contrib/bin/$(basename $0) "$@"