recording file death

1 files changed, 0 insertions, 340 deletions

diff --git a/gas/configure.was b/gas/configure.was
deleted file mode 100755
index 2485927..0000000
--- a/gas/configure.was
+++ /dev/null
@@ -1,340 +0,0 @@
-#!/bin/sh
-# Configuration script for GNU GAS
-#   Copyright (C) 1988, 1990, 1991 Free Software Foundation, Inc.
-
-#This file is not yet part of GNU GAS.
-
-#GNU GAS is free software; you can redistribute it and/or modify
-#it under the terms of the GNU General Public License as published by
-#the Free Software Foundation; either version 1, or (at your option)
-#any later version.
-
-#GNU GAS is distributed in the hope that it will be useful,
-#but WITHOUT ANY WARRANTY; without even the implied warranty of
-#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#GNU General Public License for more details.
-
-#You should have received a copy of the GNU General Public License
-#along with GNU GAS; see the file COPYING.  If not, write to
-#the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# $Id$
-
-#
-# Shell script to create proper links to machine-dependent files in
-# preparation for compiling gas.
-#
-# Usage: configure [-srcdir=DIR] [-host=HOST] TARGET
-#
-# If configure succeeds, it leaves its status in config.status.
-# If configure fails after disturbing the status quo, 
-# 	config.status is removed.
-#
-
-progname=$0
-
-remove=rm
-hard_link=ln
-symbolic_link='ln -s'
-
-host=
-target=
-
-#for Test
-#remove="echo rm"
-#hard_link="echo ln"
-#symbolic_link="echo ln -s"
-
-for arg in $*;
-do
-  case $arg in
-   -srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*)
-	srcdir=`echo $arg | sed 's/[+-]s[a-z]*=//'`
-	;;
-   -host=* | +host=* | +hos=* | +ho=* | +h=*)
-	host=`echo $arg | sed 's/[+-]h[a-z]*=//'`
-	;; 
-   *)
-# Allow configure HOST TARGET
-	if [ x$host = x ]
-	then
-		host=$target
-	fi
-	target=$arg
-	;;
-  esac
-done
-
-# Complain if an arg is missing
-if [ x$target = x ]
-then
-	echo "Usage: $progname [+srcdir=DIR] [+host=HOST] TARGET"
-	echo -n "Where HOST and TARGET are something like "
-	echo "\`vax', \`sun3', \`encore', etc."
-	if [ -r config.status ]
-	then
-		cat config.status
-	fi
-	exit 1
-fi
-
-# Default other arg
-if [ x$host = x ]
-then
-	host=$target
-fi
-
-# Find the source files, if location was not specified.
-if [ x$srcdir = x ]
-then
-	srcdirdefaulted=1
-	srcdir=.
-	if [ ! -r as.c ]
-	then
-		srcdir=..
-	fi
-fi
-
-if [ ! -r ${srcdir}/as.c ]
-then
-	if [ x$srcdirdefaulted = x ]
-	then
-	  echo "$progname: Can't find assembler sources in \`${srcdir}'." 1>&2
-	else
-	  echo "$progname: Can't find assembler sources in \`.' or \`..'." 1>&2
-	fi
-	exit 1
-fi
-
-# Decode the host machine, then the target machine.
-# For the host machine, we save the ho variable as host_ho;
-# then we decode the target machine and forget everything else
-# that came from the host machine.
-for machine in $host $target; do
-	tc=
-	obj=
-
-	host_header=
-	obj_header=
-	obj_source=
-	te_header=
-	tc_header=
-	tc_source=
-
-	make_var_file=
-
-	case $machine in
-	generic)
-		;;
-	i860)
-		tc=i860
-		obj=aout
-		;;
-	pmax | dec3100)
-		ho=pmax
-		;;
-	sun386)
-		ho=sun386
-		;;
-	sun4 | sun4-aout | sun-4 | sun4-os4 | sun-4-os4)
-		ho=sun4
-		tc=sparc
-		obj=aout
-		;;
-	sun4-bout)
-		tc=sparc
-		obj=bout
-		;;
-	sun4-bfd-sunos)
-		tc=sparc
-		obj=bfd-sunos
-		;;
-	i960 | i960-coff)
-		tc=i960
-		obj=coff
-		te=ic960
-		;;
-	i960-bout)
-		tc=i960
-		obj=bout
-		;;
-	i960-aout)
-		tc=i960
-		obj=aout
-		;;
-	sun3 | sun3-aout)
-		ho=sun3
-		tc=m68k
-		obj=aout
-		te=sun3
-		;;
-	a29k | a29k-aout)
-		tc=a29k
-		obj=aout
-		;;
-	a29k-coff)
-		tc=a29k
-		obj=coff
-		;;
-	i386)
-		tc=i386
-		obj=aout
-		;;
-	ns32k)
-		tc=ns32k
-		obj=aout
-		;;
-	vax)
-		tc=vax
-		obj=aout
-		;;
-	rs6000)
-		;;
-	esac
-	if [ x$pass1done = x ]
-	then
-		if [ x$ho = x ]; then ho=$host; fi
-		if [ x$ho_header = x ]; then ho_ho_header=ho-$ho.h
-		else ho_ho_header=$ho_header
-		fi
-		if [ x$make_var_file = x ]
-		then make_var_file=make-$ho; fi
-		ho_make_var_file=$make_var_file
-		pass1done=yes
-	else
-		host_make_var_file=$ho_make_var_file
-		ho_header=$ho_ho_header
-	fi
-done
-
-
-# Default the machine-specific variables that were not explicitly set.
-if [ x$te = x ]
-then te=generic; fi
-
-if [ x$te_header = x ]
-then te_header=te-$te.h; fi
-
-
-if [ x$tc = x ]
-then tc=generic; fi
-
-if [ x$tc_header = x ]
-then tc_header=tc-$tc.h; fi
-
-if [ x$tc_source = x ]
-then tc_source=tc-$tc.c; fi
-
-
-if [ x$obj = x ]
-then obj=generic; fi
-
-if [ x$obj_header = x ]
-then obj_header=obj-$obj.h; fi
-
-if [ x$obj_source = x ]
-then obj_source=obj-$obj.c; fi
-
-
-if [ x$atof_source = x ]
-then atof_source=atof-ieee.c; fi
-
-# Set up the list of links to be made.
-# $links is the list of link names, and $files is the list of names to link to.
-files="$ho_header $te_header $tc_header $tc_source $obj_header $obj_source $atof_source"
-links="host.h targ-env.h targ-cpu.h targ-cpu.c obj-format.h obj-format.c atof-targ.c"
-
-# Make the links.
-while [ -n "$files" ]
-do
-	# set file to car of files, files to cdr of files
-	set $files; file=$1; shift; files=$*
-	set $links; link=$1; shift; links=$*
-
-	if [ ! -r ${srcdir}/config/$file ]
-	then
-		echo "$progname: cannot create a link \`$link'," 1>&2
-		echo "since the file \`config/$file' does not exist." 1>&2
-		exit 1
-	fi
-
-	$remove -f $link
-	rm -f config.status
-	# Make a symlink if possible, otherwise try a hard link
-	$symbolic_link ${srcdir}/config/$file $link 2>/dev/null || $hard_link ${srcdir}/config/$file $link
-
-	if [ ! -r $link ]
-	then
-		echo "$progname: unable to link \`$link' to \`${srcdir}/config/$file'." 1>&2
-		exit 1
-	fi
-	echo "Linked \`$link' to \`${srcdir}/config/$file'."
-done
-
-# Build a Makefile
-
-# Install a makefile, and make it set srcdir
-# if necessary so that the sources are found.
-# Also change its value of srcdir.
-# Also create a .gdbinit file which runs the one in srcdir
-# and tells GDB to look there for source files.
-case $srcdir in
-.)
-	;;
-*)
-	echo "VPATH = ${srcdir}" > x
-	cat x ${srcdir}/Makefile.in | sed "s@^srcdir = \.@srcdir = ${srcdir}@" > Makefile.in
-	rm x
-	echo "dir ." > .gdbinit
-	echo "dir ${srcdir}" >> .gdbinit
-	echo "source ${srcdir}/.gdbinit" >> .gdbinit
-	;;
-esac
-
-# Conditionalize the makefile for this machine.
-if [ -f ${srcdir}/config/${host_make_var_file} ]
-then
-	sed -e "/####/  r ${srcdir}/config/${host_make_var_file}" Makefile.in > Makefile.tem
-else
-	cp Makefile.in Makefile.tem
-fi
-
-# Remove all formfeeds, since some Makes get confused by them.
-sed "s///" Makefile.tem > Makefile.tem1
-
-# Delete the intermediate files
-rm Makefile.tem
-if [ x$srcdir != x. ]
-then
-	rm Makefile.in
-fi
-
-
-# actual Makefile starts here.
-
-echo "host = $host" > Makefile
-echo "target = $target" >> Makefile
-
-# Define macro CROSS_ASSEMBLE in compilation if this is a cross-assembler.
-if [ x$host = x$target ]
-then
-	sed "/^ALL=gas/s//ALL=bootstrap/" < Makefile.tem1 >> Makefile
-else
-	echo "CROSS=-DCROSS_ASSEMBLE" >> Makefile
-	cat Makefile.tem1 >> Makefile
-fi
-
-rm Makefile.tem1
-
-echo "Edited the makefile"
-
-if [ x$host = x$target ]
-then
-	echo "Links are now set up for use with a $target." \
-		| tee config.status
-else
-	echo "Links are now set up for host $host and target $target." \
-		| tee config.status
-fi
-
-exit 0