or1k: Add the l.adrp insn and supporting relocations

This patch adds the new instruction and relocation as per proposal:
   https://openrisc.io/proposals/ladrp

This is to be added to the spec in an upcoming revision.  The new instruction
l.adrp loads the page offset of the current instruction offset by
a 21-bit immediate shifted left 13-bits.  This is meant to be used with
a 13-bit lower bit page offset.  This allows us to free up the got
register r16.

  l.adrp  r3, foo
  l.ori   r4, r3, po(foo)
  l.lbz   r5, po(foo)(r3)
  l.sb    po(foo)(r3), r6

The relocations we add are:

 - BFD_RELOC_OR1K_PLTA26	For PLT jump relocation with PLT entry
   asm: plta()			implemented using l.ardp, meaning
				no need for r16 (the GOT reg)

 - BFD_RELOC_OR1K_GOT_PG21	Upper 21-bit Page offset got address
   asm: got()
 - BFD_RELOC_OR1K_TLS_GD_PG21	Upper 21-bit Page offset with TLS General
   asm: tlsgd()			Dynamic calculation
 - BFD_RELOC_OR1K_TLS_LDM_PG21	Upper 21-bit Page offset with TLS local
   asm: tlsldm()		dynamic calculation
 - BFD_RELOC_OR1K_TLS_IE_PG21	Upper 21-bit Page offset with TLS Initial
   asm: gottp() 		Executable calculation
 - BFD_RELOC_OR1K_PCREL_PG21	Default relocation for disp21 (l.adrp
				instructions)

 - BFD_RELOC_OR1K_LO13		low 13-bit page offset relocation
   asm: po()			i.e. mem loads, addi etc
 - BFD_RELOC_OR1K_SLO13		low 13-bit page offset relocation
   asm: po()			i.e. mem stores, with split immediate
 - BFD_RELOC_OR1K_GOT_LO13,	low 13-bit page offset with GOT calcs
   asm: gotpo()
 - BFD_RELOC_OR1K_TLS_GD_LO13	Lower 13-bit offset with TLS GD calcs
   asm: tlsgdpo()
 - BFD_RELOC_OR1K_TLS_LDM_LO13	Lower 13-bit offset with TLS LD calcs
   asm: tlsldmpo()
 - BFD_RELOC_OR1K_TLS_IE_LO13	Lower 13-bit offset with TLS IE calcs
   asm: gottppo()

bfd/ChangeLog:

yyyy-mm-dd  Richard Henderson  <rth@twiddle.net>

	* bfd-in2.h: Regenerated.
	* elf32-or1k.c: (or1k_elf_howto_table): Fix formatting for
	R_OR1K_PLT26, Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21,
	R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21,
	R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13,
	R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26.
	(or1k_reloc_map): Add BFD_RELOC_OR1K_PCREL_PG21,
	BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_TLS_GD_PG21,
	BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_IE_PG21,
	BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_GOT_LO13,
	BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_GD_LO13,
	BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_LO13,
	BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_PLTA26.
	(elf_or1k_link_hash_table): Add field saw_plta.
	(or1k_final_link_relocate): Add value calculations for new relocations.
	(or1k_elf_relocate_section): Add section relocations for new
	relocations.
	(or1k_write_plt_entry): New function.
	(or1k_elf_finish_dynamic_sections): Add support for PLTA relocations
	using new l.adrp instruction.  Cleanup PLT relocation code generation.
	* libbfd.h: Regenerated.
	* reloc.c: Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_LO13,
	BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_GOT_LO13,
	BFD_RELOC_OR1K_PLTA26, BFD_RELOC_OR1K_TLS_GD_PG21,
	BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21,
	BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21,
	BFD_RELOC_OR1K_TLS_IE_LO13.

cpu/ChangeLog:

yyyy-mm-dd  Richard Henderson  <rth@twiddle.net>

	* or1k.opc (parse_disp26): Add support for plta() relocations.
	(parse_disp21): New function.
	(or1k_rclass): New enum.
	(or1k_rtype): New enum.
	(or1k_imm16_relocs): Define new PO and SPO relocation mappings.
	(parse_reloc): Add new po(), gotpo() and gottppo() for LO13 relocations.
	(parse_imm16): Add support for the new 21bit and 13bit relocations.
	* or1korbis.cpu (f-disp26): Don't assume SI.
	(f-disp21): New pc-relative 21-bit 13 shifted to right.
	(insn-opcode): Add ADRP.
	(l-adrp): New instruction.

gas/ChangeLog:

yyyy-mm-dd  Richard Henderson  <rth@twiddle.net>

	* config/tc-or1k.c (or1k_apply_fix): Add BFD_RELOC_OR1K_TLS_GD_PG21,
	BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21,
	BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21,
	BFD_RELOC_OR1K_TLS_IE_LO13.
	* testsuite/gas/or1k/allinsn.s: Add test for l.adrp.
	* testsuite/gas/or1k/allinsn.d: Add test results for new
	instructions.
	* testsuite/gas/or1k/reloc-1.s: Add tests to generate
	R_OR1K_PLTA26, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21,
	R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13,
	R_OR1K_TLD_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_LO13, R_OR1K_SLO13
	relocations.
	* testsuite/gas/or1k/reloc-1.d: Add relocation results for
	tests.
	* testsuite/gas/or1k/reloc-2.s: Add negative tests for store to
	gotpo().
	* testsuite/gas/or1k/reloc-2.l: Add expected error test results.

ld/ChangeLog:

yyyy-mm-dd  Richard Henderson  <rth@twiddle.net>

	* testsuite/ld-or1k/or1k.exp: Add test cases for plt generation.
	* testsuite/ld-or1k/plt1.dd: New file.
	* testsuite/ld-or1k/plt1.s: New file.
	* testsuite/ld-or1k/plt1.x.dd: New file.
	* testsuite/ld-or1k/plta1.dd: New file.
	* testsuite/ld-or1k/plta1.s: New file.
	* testsuite/ld-or1k/pltlib.s: New file.

include/ChangeLog:

yyyy-mm-dd  Richard Henderson  <rth@twiddle.net>

	* elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_PCREL_PG21,
	R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21,
	R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13,
	R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13,
	R_OR1K_SLO13, R_OR1K_PLTA26.

opcodes/ChangeLog:

yyyy-mm-dd  Richard Henderson  <rth@twiddle.net>

	* or1k-asm.c: Regenerated.
	* or1k-desc.c: Regenerated.
	* or1k-desc.h: Regenerated.
	* or1k-dis.c: Regenerated.
	* or1k-ibld.c: Regenerated.
	* or1k-opc.c: Regenerated.
	* or1k-opc.h: Regenerated.
	* or1k-opinst.c: Regenerated.

1 files changed, 34 insertions, 1 deletions

diff --git a/cpu/or1korbis.cpu b/cpu/or1korbis.cpu
index 535bd28..6fbf40a 100644
--- a/cpu/or1korbis.cpu
+++ b/cpu/or1korbis.cpu
@@ -74,10 +74,25 @@
     25
     26
     INT
-    ((value pc) (sra SI (sub IAI value pc) (const 2)))
+    ((value pc) (sra IAI (sub IAI value pc) (const 2)))
     ((value pc) (add IAI (sll IAI value (const 2)) pc))
     )
 
+; PC relative, 21-bit, 13 shifted to right, aligned.
+; Note that the alignment means that we can't simplify relocations in the
+; same way as we do for pc-relative, so we use ABS-ADDR instead of PCREL-ADDR.
+(df f-disp21
+    "disp21"
+    ((MACH ORBIS-MACHS) ABS-ADDR)
+    20
+    21
+    INT
+    ((value pc)
+     (sub IAI (sra IAI value (const 13)) (sra IAI pc (const 13))))
+    ((value pc)
+     (sll IAI (add IAI value (sra IAI pc (const 13))) (const 13)))
+    )
+
 ; Immediates.
 (dnf f-uimm16    "uimm16"                      ((MACH ORBIS-MACHS))          15 16)
 (df  f-simm16    "simm16"                      ((MACH ORBIS-MACHS) SIGN-OPT) 15 16 INT #f #f)
@@ -134,6 +149,7 @@
   insn-opcode "insn main opcode enums" ((MACH ORBIS-MACHS)) OPC_ f-opcode
   (("J"            #x00)
    ("JAL"          #x01)
+   ("ADRP"	   #x02)
    ("BNF"          #x03)
    ("BF"           #x04)
    ("NOP"          #x05)
@@ -312,6 +328,15 @@
   )
 
 (define-operand
+  (name disp21)
+  (comment "pc-rel 21 bit")
+  (attrs (MACH ORBIS-MACHS))
+  (type h-iaddr)
+  (index f-disp21)
+  (handlers (parse "disp21"))
+  )
+
+(define-operand
   (name simm16)
   (comment "16-bit signed immediate")
   (attrs (MACH ORBIS-MACHS) SIGN-OPT)
@@ -403,6 +428,14 @@
            )
   )
 
+(dni l-adrp "adrp reg/disp21"
+    ((MACH ORBIS-MACHS))
+    "l.adrp $rD,${disp21}"
+    (+ OPC_ADRP rD disp21)
+    (set UWI rD disp21)
+    ()
+  )
+
 (define-cti
   l-jal
   "jump and link (pc-relative iaddr)"