RDMA/hw/hfi1/chip: Fix a bunch of kernel-doc formatting and spelling issues (da0940e5) · Commits · github.com / kvm-riscv / linux

drivers/infiniband/hw/hfi1/chip.c

+23 −23

Original line number	Diff line number	Diff line
		@@ -1323,8 +1323,8 @@ CNTR_ELEM(#name, \

		/**
		* hfi_addr_from_offset - return addr for readq/writeq
		* @dd - the dd device
		* @offset - the offset of the CSR within bar0
		* @dd: the dd device
		* @offset: the offset of the CSR within bar0
		*
		* This routine selects the appropriate base address
		* based on the indicated offset.
		@@ -1340,8 +1340,8 @@ static inline void __iomem *hfi1_addr_from_offset(

		/**
		* read_csr - read CSR at the indicated offset
		* @dd - the dd device
		* @offset - the offset of the CSR within bar0
		* @dd: the dd device
		* @offset: the offset of the CSR within bar0
		*
		* Return: the value read or all FF's if there
		* is no mapping
		@@ -1355,9 +1355,9 @@ u64 read_csr(const struct hfi1_devdata *dd, u32 offset)

		/**
		* write_csr - write CSR at the indicated offset
		* @dd - the dd device
		* @offset - the offset of the CSR within bar0
		* @value - value to write
		* @dd: the dd device
		* @offset: the offset of the CSR within bar0
		* @value: value to write
		*/
		void write_csr(const struct hfi1_devdata *dd, u32 offset, u64 value)
		{
		@@ -1373,8 +1373,8 @@ void write_csr(const struct hfi1_devdata *dd, u32 offset, u64 value)

		/**
		* get_csr_addr - return te iomem address for offset
		* @dd - the dd device
		* @offset - the offset of the CSR within bar0
		* @dd: the dd device
		* @offset: the offset of the CSR within bar0
		*
		* Return: The iomem address to use in subsequent
		* writeq/readq operations.
		@@ -8433,7 +8433,7 @@ static inline int check_packet_present(struct hfi1_ctxtdata *rcd)
		return hfi1_rcd_head(rcd) != tail;
		}

		/**
		/*
		* Common code for receive contexts interrupt handlers.
		* Update traces, increment kernel IRQ counter and
		* setup ASPM when needed.
		@@ -8447,7 +8447,7 @@ static void receive_interrupt_common(struct hfi1_ctxtdata *rcd)
		aspm_ctx_disable(rcd);
		}

		/**
		/*
		* __hfi1_rcd_eoi_intr() - Make HW issue receive interrupt
		* when there are packets present in the queue. When calling
		* with interrupts enabled please use hfi1_rcd_eoi_intr.
		@@ -8484,8 +8484,8 @@ static void hfi1_rcd_eoi_intr(struct hfi1_ctxtdata *rcd)

		/**
		* hfi1_netdev_rx_napi - napi poll function to move eoi inline
		* @napi - pointer to napi object
		* @budget - netdev budget
		* @napi: pointer to napi object
		* @budget: netdev budget
		*/
		int hfi1_netdev_rx_napi(struct napi_struct *napi, int budget)
		{
		@@ -10142,7 +10142,7 @@ u32 lrh_max_header_bytes(struct hfi1_devdata *dd)

		/*
		* Set Send Length
		* @ppd - per port data
		* @ppd: per port data
		*
		* Set the MTU by limiting how many DWs may be sent. The SendLenCheck*
		* registers compare against LRH.PktLen, so use the max bytes included
		@@ -14200,9 +14200,9 @@ u8 hfi1_get_qp_map(struct hfi1_devdata *dd, u8 idx)

		/**
		* init_qpmap_table
		* @dd - device data
		* @first_ctxt - first context
		* @last_ctxt - first context
		* @dd: device data
		* @first_ctxt: first context
		* @last_ctxt: first context
		*
		* This return sets the qpn mapping table that
		* is indexed by qpn[8:1].
		@@ -14383,8 +14383,8 @@ static int qos_rmt_entries(struct hfi1_devdata dd, unsigned int mp,

		/**
		* init_qos - init RX qos
		* @dd - device data
		* @rmt - RSM map table
		* @dd: device data
		* @rmt: RSM map table
		*
		* This routine initializes Rule 0 and the RSM map table to implement
		* quality of service (qos).
		@@ -15022,8 +15022,7 @@ static int check_int_registers(struct hfi1_devdata *dd)

		/**
		* hfi1_init_dd() - Initialize most of the dd structure.
		* @dev: the pci_dev for hfi1_ib device
		* @ent: pci_device_id struct for this dev
		* @dd: the dd device
		*
		* This is global, and is called directly at init to set up the
		* chip-specific function pointers for later use.
		@@ -15378,10 +15377,11 @@ static u16 delay_cycles(struct hfi1_pportdata *ppd, u32 desired_egress_rate,

		/**
		* create_pbc - build a pbc for transmission
		* @ppd: info of physical Hfi port
		* @flags: special case flags or-ed in built pbc
		* @srate: static rate
		* @srate_mbs: static rate
		* @vl: vl
		* @dwlen: dword length (header words + data words + pbc words)
		* @dw_len: dword length (header words + data words + pbc words)
		*
		* Create a PBC with the given flags, rate, VL, and length.
		*