Commit 54a9a3af authored by Philipp Zabel's avatar Philipp Zabel Committed by Shawn Guo
Browse files

ARM: dts: pfla02: Add ethernet phy supply regulator 



The 2.5V VDD_ETH_IO voltage supplied by the DA9063 LDO4 is used
to power the KSZ9031 PHY DVDDH input and to pull the necessary
pins (including bootstrap pins) high.
It also powers the i.MX6 NVCC_RGMII and NVCC_ENET inputs.

Signed-off-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: default avatarShawn Guo <shawn.guo@freescale.com>
parent f4511417

arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi

+1 −0
Original line number Diff line number Diff line
@@ -301,6 +301,7 @@ &fec { 
	pinctrl-0 = <&pinctrl_enet>;

	phy-mode = "rgmii";

	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;

	phy-supply = <&vdd_eth_io_reg>;

	status = "disabled";

};